summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-23 17:36:29 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-23 17:36:29 -0700
commit0d19eac12031680dc5f5402921fb0c388e42f619 (patch)
tree57302fb8778b6527c35175cc1edf228dd9f7abb9
parent56c10bf82c10588b743e75a13a7949e11b9fc942 (diff)
parentbba1594d348b59d6172e02bf74fba837c8273989 (diff)
downloadlinux-0d19eac12031680dc5f5402921fb0c388e42f619.tar.bz2
Merge branch 'amba' of git://git.linaro.org/people/rmk/linux-arm
Pull #2 ARM updates from Russell King: "Further ARM AMBA primecell updates which aren't included directly in the previous commit. I wanted to keep these separate as they're touching stuff outside arch/arm/." * 'amba' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver ARM: 7335/1: mach-u300: do away with MMC config files ARM: 7280/1: mmc: mmci: Cache MMCICLOCK and MMCIPOWER register ARM: 7309/1: realview: fix unconnected interrupts on EB11MP ARM: 7230/1: mmc: mmci: Fix PIO read for small SDIO packets ARM: 7227/1: mmc: mmci: Prepare for SDIO before setting up DMA job ARM: 7223/1: mmc: mmci: Fixup use of runtime PM and use autosuspend ARM: 7221/1: mmc: mmci: Change from using legacy suspend ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handler ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction ARM: 7217/1: mmc: mmci: Put power register deviations in variant data ARM: 7216/1: mmc: mmci: Do not release spinlock in request_end ARM: 7215/1: mmc: mmci: Increase max_segs from 16 to 128
-rw-r--r--arch/arm/mach-realview/include/mach/irqs-eb.h23
-rw-r--r--arch/arm/mach-u300/Makefile1
-rw-r--r--arch/arm/mach-u300/core.c38
-rw-r--r--arch/arm/mach-u300/mmc.c52
-rw-r--r--arch/arm/mach-u300/mmc.h18
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c21
-rw-r--r--drivers/char/hw_random/nomadik-rng.c13
-rw-r--r--drivers/dma/pl330.c13
-rw-r--r--drivers/input/serio/ambakmi.c13
-rw-r--r--drivers/mmc/host/mmci.c178
-rw-r--r--drivers/mmc/host/mmci.h15
-rw-r--r--drivers/rtc/rtc-pl030.c13
-rw-r--r--drivers/rtc/rtc-pl031.c13
-rw-r--r--drivers/watchdog/sp805_wdt.c12
-rw-r--r--include/linux/amba/bus.h9
-rw-r--r--include/linux/amba/mmci.h22
-rw-r--r--sound/arm/aaci.c13
17 files changed, 202 insertions, 265 deletions
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h
index 204d5378f309..d6b5073692d2 100644
--- a/arch/arm/mach-realview/include/mach/irqs-eb.h
+++ b/arch/arm/mach-realview/include/mach/irqs-eb.h
@@ -96,16 +96,19 @@
#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30)
#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31)
-#define IRQ_EB11MP_UART2 -1
-#define IRQ_EB11MP_UART3 -1
-#define IRQ_EB11MP_CLCD -1
-#define IRQ_EB11MP_DMA -1
-#define IRQ_EB11MP_WDOG -1
-#define IRQ_EB11MP_GPIO0 -1
-#define IRQ_EB11MP_GPIO1 -1
-#define IRQ_EB11MP_GPIO2 -1
-#define IRQ_EB11MP_SCI -1
-#define IRQ_EB11MP_SSP -1
+/*
+ * The 11MPcore tile leaves the following unconnected.
+ */
+#define IRQ_EB11MP_UART2 0
+#define IRQ_EB11MP_UART3 0
+#define IRQ_EB11MP_CLCD 0
+#define IRQ_EB11MP_DMA 0
+#define IRQ_EB11MP_WDOG 0
+#define IRQ_EB11MP_GPIO0 0
+#define IRQ_EB11MP_GPIO1 0
+#define IRQ_EB11MP_GPIO2 0
+#define IRQ_EB11MP_SCI 0
+#define IRQ_EB11MP_SSP 0
#define NR_GIC_EB11MP 2
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 285538124e5e..fd3a5c382f47 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -8,7 +8,6 @@ obj-n :=
obj- :=
obj-$(CONFIG_ARCH_U300) += u300.o
-obj-$(CONFIG_MMC) += mmc.o
obj-$(CONFIG_SPI_PL022) += spi.o
obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
obj-$(CONFIG_I2C_STU300) += i2c.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index b911590c8ae7..8b90c44d237f 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -18,6 +18,7 @@
#include <linux/termios.h>
#include <linux/dmaengine.h>
#include <linux/amba/bus.h>
+#include <linux/amba/mmci.h>
#include <linux/amba/serial.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
@@ -44,9 +45,9 @@
#include <mach/gpio-u300.h>
#include "clock.h"
-#include "mmc.h"
#include "spi.h"
#include "i2c.h"
+#include "u300-gpio.h"
/*
* Static I/O mappings that are needed for booting the U300 platforms. The
@@ -117,11 +118,6 @@ static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
/* AHB device at 0x4000 offset */
static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
-
-/*
- * Everything within this next ifdef deals with external devices connected to
- * the APP SPI bus.
- */
/* Fast device at 0x6000 offset */
static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
{ IRQ_U300_SPI }, NULL);
@@ -129,8 +125,26 @@ static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
/* Fast device at 0x1000 offset */
#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
+static struct mmci_platform_data mmcsd_platform_data = {
+ /*
+ * Do not set ocr_mask or voltage translation function,
+ * we have a regulator we can control instead.
+ */
+ .f_max = 24000000,
+ .gpio_wp = -1,
+ .gpio_cd = U300_GPIO_PIN_MMC_CD,
+ .cd_invert = true,
+ .capabilities = MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+#ifdef CONFIG_COH901318
+ .dma_filter = coh901318_filter_id,
+ .dma_rx_param = (void *) U300_DMA_MMCSD_RX_TX,
+ /* Don't specify a TX channel, this RX channel is bidirectional */
+#endif
+};
+
static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
- U300_MMCSD_IRQS, NULL);
+ U300_MMCSD_IRQS, &mmcsd_platform_data);
/*
* The order of device declaration may be important, since some devices
@@ -1830,16 +1844,6 @@ void __init u300_init_devices(void)
writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
}
-static int core_module_init(void)
-{
- /*
- * This needs to be initialized later: it needs the input framework
- * to be initialized first.
- */
- return mmc_init(&mmcsd_device);
-}
-module_init(core_module_init);
-
/* Forward declare this function from the watchdog */
void coh901327_watchdog_reset(void);
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
deleted file mode 100644
index 05abd6ad9fab..000000000000
--- a/arch/arm/mach-u300/mmc.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/mmc.c
- *
- *
- * Copyright (C) 2009 ST-Ericsson SA
- * License terms: GNU General Public License (GPL) version 2
- *
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Johan Lundin
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/mmc/host.h>
-#include <linux/dmaengine.h>
-#include <linux/amba/mmci.h>
-#include <linux/slab.h>
-#include <mach/coh901318.h>
-#include <mach/dma_channels.h>
-
-#include "u300-gpio.h"
-#include "mmc.h"
-
-static struct mmci_platform_data mmc0_plat_data = {
- /*
- * Do not set ocr_mask or voltage translation function,
- * we have a regulator we can control instead.
- */
- /* Nominally 2.85V on our platform */
- .f_max = 24000000,
- .gpio_wp = -1,
- .gpio_cd = U300_GPIO_PIN_MMC_CD,
- .cd_invert = true,
- .capabilities = MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-#ifdef CONFIG_COH901318
- .dma_filter = coh901318_filter_id,
- .dma_rx_param = (void *) U300_DMA_MMCSD_RX_TX,
- /* Don't specify a TX channel, this RX channel is bidirectional */
-#endif
-};
-
-int __devinit mmc_init(struct amba_device *adev)
-{
- struct device *mmcsd_device = &adev->dev;
- int ret = 0;
-
- mmcsd_device->platform_data = &mmc0_plat_data;
-
- return ret;
-}
diff --git a/arch/arm/mach-u300/mmc.h b/arch/arm/mach-u300/mmc.h
deleted file mode 100644
index 92b85125abb3..000000000000
--- a/arch/arm/mach-u300/mmc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/mmc.h
- *
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- *
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-#ifndef MMC_H
-#define MMC_H
-
-#include <linux/amba/bus.h>
-
-int __devinit mmc_init(struct amba_device *adev);
-
-#endif
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 5dde4d4ebe88..1daead3e583e 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -31,21 +31,13 @@
* SDI 0 (MicroSD slot)
*/
-/* MMCIPOWER bits */
-#define MCI_DATA2DIREN (1 << 2)
-#define MCI_CMDDIREN (1 << 3)
-#define MCI_DATA0DIREN (1 << 4)
-#define MCI_DATA31DIREN (1 << 5)
-#define MCI_FBCLKEN (1 << 7)
-
/* GPIO pins used by the sdi0 level shifter */
static int sdi0_en = -1;
static int sdi0_vsel = -1;
-static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
- unsigned char power_mode)
+static int mop500_sdi0_ios_handler(struct device *dev, struct mmc_ios *ios)
{
- switch (power_mode) {
+ switch (ios->power_mode) {
case MMC_POWER_UP:
case MMC_POWER_ON:
/*
@@ -65,8 +57,7 @@ static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
break;
}
- return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN |
- MCI_DATA2DIREN | MCI_DATA31DIREN;
+ return 0;
}
#ifdef CONFIG_STE_DMA40
@@ -90,13 +81,17 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
#endif
static struct mmci_platform_data mop500_sdi0_data = {
- .vdd_handler = mop500_sdi0_vdd_handler,
+ .ios_handler = mop500_sdi0_ios_handler,
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA |
MMC_CAP_SD_HIGHSPEED |
MMC_CAP_MMC_HIGHSPEED,
.gpio_wp = -1,
+ .sigdir = MCI_ST_FBCLKEN |
+ MCI_ST_CMDDIREN |
+ MCI_ST_DATA0DIREN |
+ MCI_ST_DATA2DIREN,
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &mop500_sdi0_dma_cfg_rx,
diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c
index 3d3c1e6703b4..96de0249e595 100644
--- a/drivers/char/hw_random/nomadik-rng.c
+++ b/drivers/char/hw_random/nomadik-rng.c
@@ -107,17 +107,6 @@ static struct amba_driver nmk_rng_driver = {
.id_table = nmk_rng_ids,
};
-static int __init nmk_rng_init(void)
-{
- return amba_driver_register(&nmk_rng_driver);
-}
-
-static void __devexit nmk_rng_exit(void)
-{
- amba_driver_unregister(&nmk_rng_driver);
-}
-
-module_init(nmk_rng_init);
-module_exit(nmk_rng_exit);
+module_amba_driver(nmk_rng_driver);
MODULE_LICENSE("GPL");
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index b8ec03ee8e22..16b66c827f19 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -1035,18 +1035,7 @@ static struct amba_driver pl330_driver = {
.remove = pl330_remove,
};
-static int __init pl330_init(void)
-{
- return amba_driver_register(&pl330_driver);
-}
-module_init(pl330_init);
-
-static void __exit pl330_exit(void)
-{
- amba_driver_unregister(&pl330_driver);
- return;
-}
-module_exit(pl330_exit);
+module_amba_driver(pl330_driver);
MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
MODULE_DESCRIPTION("API Driver for PL330 DMAC");
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index 8407d5b0ced8..2ffd110bd5bc 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -208,18 +208,7 @@ static struct amba_driver ambakmi_driver = {
.resume = amba_kmi_resume,
};
-static int __init amba_kmi_init(void)
-{
- return amba_driver_register(&ambakmi_driver);
-}
-
-static void __exit amba_kmi_exit(void)
-{
- amba_driver_unregister(&ambakmi_driver);
-}
-
-module_init(amba_kmi_init);
-module_exit(amba_kmi_exit);
+module_amba_driver(ambakmi_driver);
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("AMBA KMI controller driver");
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index bdfd05517dd5..983e244eca76 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -53,6 +53,8 @@ static unsigned int fmax = 515633;
* @sdio: variant supports SDIO
* @st_clkdiv: true if using a ST-specific clock divider algorithm
* @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
+ * @pwrreg_powerup: power up value for MMCIPOWER register
+ * @signal_direction: input/out direction of bus signals can be indicated
*/
struct variant_data {
unsigned int clkreg;
@@ -63,18 +65,22 @@ struct variant_data {
bool sdio;
bool st_clkdiv;
bool blksz_datactrl16;
+ u32 pwrreg_powerup;
+ bool signal_direction;
};
static struct variant_data variant_arm = {
.fifosize = 16 * 4,
.fifohalfsize = 8 * 4,
.datalength_bits = 16,
+ .pwrreg_powerup = MCI_PWR_UP,
};
static struct variant_data variant_arm_extended_fifo = {
.fifosize = 128 * 4,
.fifohalfsize = 64 * 4,
.datalength_bits = 16,
+ .pwrreg_powerup = MCI_PWR_UP,
};
static struct variant_data variant_u300 = {
@@ -83,6 +89,8 @@ static struct variant_data variant_u300 = {
.clkreg_enable = MCI_ST_U300_HWFCEN,
.datalength_bits = 16,
.sdio = true,
+ .pwrreg_powerup = MCI_PWR_ON,
+ .signal_direction = true,
};
static struct variant_data variant_ux500 = {
@@ -93,6 +101,8 @@ static struct variant_data variant_ux500 = {
.datalength_bits = 24,
.sdio = true,
.st_clkdiv = true,
+ .pwrreg_powerup = MCI_PWR_ON,
+ .signal_direction = true,
};
static struct variant_data variant_ux500v2 = {
@@ -104,11 +114,35 @@ static struct variant_data variant_ux500v2 = {
.sdio = true,
.st_clkdiv = true,
.blksz_datactrl16 = true,
+ .pwrreg_powerup = MCI_PWR_ON,
+ .signal_direction = true,
};
/*
* This must be called with host->lock held
*/
+static void mmci_write_clkreg(struct mmci_host *host, u32 clk)
+{
+ if (host->clk_reg != clk) {
+ host->clk_reg = clk;
+ writel(clk, host->base + MMCICLOCK);
+ }
+}
+
+/*
+ * This must be called with host->lock held
+ */
+static void mmci_write_pwrreg(struct mmci_host *host, u32 pwr)
+{
+ if (host->pwr_reg != pwr) {
+ host->pwr_reg = pwr;
+ writel(pwr, host->base + MMCIPOWER);
+ }
+}
+
+/*
+ * This must be called with host->lock held
+ */
static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
{
struct variant_data *variant = host->variant;
@@ -153,7 +187,7 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8)
clk |= MCI_ST_8BIT_BUS;
- writel(clk, host->base + MMCICLOCK);
+ mmci_write_clkreg(host, clk);
}
static void
@@ -166,14 +200,10 @@ mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
host->mrq = NULL;
host->cmd = NULL;
- /*
- * Need to drop the host lock here; mmc_request_done may call
- * back into the driver...
- */
- spin_unlock(&host->lock);
- pm_runtime_put(mmc_dev(host->mmc));
mmc_request_done(host->mmc, mrq);
- spin_lock(&host->lock);
+
+ pm_runtime_mark_last_busy(mmc_dev(host->mmc));
+ pm_runtime_put_autosuspend(mmc_dev(host->mmc));
}
static void mmci_set_mask1(struct mmci_host *host, unsigned int mask)
@@ -607,6 +637,11 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
if (data->flags & MMC_DATA_READ)
datactrl |= MCI_DPSM_DIRECTION;
+ /* The ST Micro variants has a special bit to enable SDIO */
+ if (variant->sdio && host->mmc->card)
+ if (mmc_card_sdio(host->mmc->card))
+ datactrl |= MCI_ST_DPSM_SDIOEN;
+
/*
* Attempt to use DMA operation mode, if this
* should fail, fall back to PIO mode
@@ -635,11 +670,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
irqmask = MCI_TXFIFOHALFEMPTYMASK;
}
- /* The ST Micro variants has a special bit to enable SDIO */
- if (variant->sdio && host->mmc->card)
- if (mmc_card_sdio(host->mmc->card))
- datactrl |= MCI_ST_DPSM_SDIOEN;
-
writel(datactrl, base + MMCIDATACTRL);
writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0);
mmci_set_mask1(host, irqmask);
@@ -786,7 +816,24 @@ static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int rema
if (count <= 0)
break;
- readsl(base + MMCIFIFO, ptr, count >> 2);
+ /*
+ * SDIO especially may want to send something that is
+ * not divisible by 4 (as opposed to card sectors
+ * etc). Therefore make sure to always read the last bytes
+ * while only doing full 32-bit reads towards the FIFO.
+ */
+ if (unlikely(count & 0x3)) {
+ if (count < 4) {
+ unsigned char buf[4];
+ readsl(base + MMCIFIFO, buf, 1);
+ memcpy(ptr, buf, count);
+ } else {
+ readsl(base + MMCIFIFO, ptr, count >> 2);
+ count &= ~0x3;
+ }
+ } else {
+ readsl(base + MMCIFIFO, ptr, count >> 2);
+ }
ptr += count;
remain -= count;
@@ -821,14 +868,13 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
*/
if (variant->sdio &&
mmc_card_sdio(host->mmc->card)) {
+ u32 clk;
if (count < 8)
- writel(readl(host->base + MMCICLOCK) &
- ~variant->clkreg_enable,
- host->base + MMCICLOCK);
+ clk = host->clk_reg & ~variant->clkreg_enable;
else
- writel(readl(host->base + MMCICLOCK) |
- variant->clkreg_enable,
- host->base + MMCICLOCK);
+ clk = host->clk_reg | variant->clkreg_enable;
+
+ mmci_write_clkreg(host, clk);
}
/*
@@ -1015,10 +1061,17 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct mmci_host *host = mmc_priv(mmc);
+ struct variant_data *variant = host->variant;
u32 pwr = 0;
unsigned long flags;
int ret;
+ pm_runtime_get_sync(mmc_dev(mmc));
+
+ if (host->plat->ios_handler &&
+ host->plat->ios_handler(mmc_dev(mmc), ios))
+ dev_err(mmc_dev(mmc), "platform ios_handler failed\n");
+
switch (ios->power_mode) {
case MMC_POWER_OFF:
if (host->vcc)
@@ -1035,22 +1088,38 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
* power should be rare so we print an error
* and return here.
*/
- return;
+ goto out;
}
}
- if (host->plat->vdd_handler)
- pwr |= host->plat->vdd_handler(mmc_dev(mmc), ios->vdd,
- ios->power_mode);
- /* The ST version does not have this, fall through to POWER_ON */
- if (host->hw_designer != AMBA_VENDOR_ST) {
- pwr |= MCI_PWR_UP;
- break;
- }
+ /*
+ * The ST Micro variant doesn't have the PL180s MCI_PWR_UP
+ * and instead uses MCI_PWR_ON so apply whatever value is
+ * configured in the variant data.
+ */
+ pwr |= variant->pwrreg_powerup;
+
+ break;
case MMC_POWER_ON:
pwr |= MCI_PWR_ON;
break;
}
+ if (variant->signal_direction && ios->power_mode != MMC_POWER_OFF) {
+ /*
+ * The ST Micro variant has some additional bits
+ * indicating signal direction for the signals in
+ * the SD/MMC bus and feedback-clock usage.
+ */
+ pwr |= host->plat->sigdir;
+
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ pwr &= ~MCI_ST_DATA74DIREN;
+ else if (ios->bus_width == MMC_BUS_WIDTH_1)
+ pwr &= (~MCI_ST_DATA74DIREN &
+ ~MCI_ST_DATA31DIREN &
+ ~MCI_ST_DATA2DIREN);
+ }
+
if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
if (host->hw_designer != AMBA_VENDOR_ST)
pwr |= MCI_ROD;
@@ -1066,13 +1135,13 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_lock_irqsave(&host->lock, flags);
mmci_set_clkreg(host, ios->clock);
-
- if (host->pwr != pwr) {
- host->pwr = pwr;
- writel(pwr, host->base + MMCIPOWER);
- }
+ mmci_write_pwrreg(host, pwr);
spin_unlock_irqrestore(&host->lock, flags);
+
+ out:
+ pm_runtime_mark_last_busy(mmc_dev(mmc));
+ pm_runtime_put_autosuspend(mmc_dev(mmc));
}
static int mmci_get_ro(struct mmc_host *mmc)
@@ -1346,6 +1415,8 @@ static int __devinit mmci_probe(struct amba_device *dev,
mmci_dma_setup(host);
+ pm_runtime_set_autosuspend_delay(&dev->dev, 50);
+ pm_runtime_use_autosuspend(&dev->dev);
pm_runtime_put(&dev->dev);
mmc_add_host(mmc);
@@ -1430,43 +1501,49 @@ static int __devexit mmci_remove(struct amba_device *dev)
return 0;
}
-#ifdef CONFIG_PM
-static int mmci_suspend(struct amba_device *dev, pm_message_t state)
+#ifdef CONFIG_SUSPEND
+static int mmci_suspend(struct device *dev)
{
- struct mmc_host *mmc = amba_get_drvdata(dev);
+ struct amba_device *adev = to_amba_device(dev);
+ struct mmc_host *mmc = amba_get_drvdata(adev);
int ret = 0;
if (mmc) {
struct mmci_host *host = mmc_priv(mmc);
ret = mmc_suspend_host(mmc);
- if (ret == 0)
+ if (ret == 0) {
+ pm_runtime_get_sync(dev);
writel(0, host->base + MMCIMASK0);
+ }
}
return ret;
}
-static int mmci_resume(struct amba_device *dev)
+static int mmci_resume(struct device *dev)
{
- struct mmc_host *mmc = amba_get_drvdata(dev);
+ struct amba_device *adev = to_amba_device(dev);
+ struct mmc_host *mmc = amba_get_drvdata(adev);
int ret = 0;
if (mmc) {
struct mmci_host *host = mmc_priv(mmc);
writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+ pm_runtime_put(dev);
ret = mmc_resume_host(mmc);
}
return ret;
}
-#else
-#define mmci_suspend NULL
-#define mmci_resume NULL
#endif
+static const struct dev_pm_ops mmci_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(mmci_suspend, mmci_resume)
+};
+
static struct amba_id mmci_ids[] = {
{
.id = 0x00041180,
@@ -1512,26 +1589,15 @@ MODULE_DEVICE_TABLE(amba, mmci_ids);
static struct amba_driver mmci_driver = {
.drv = {
.name = DRIVER_NAME,
+ .pm = &mmci_dev_pm_ops,
},
.probe = mmci_probe,
.remove = __devexit_p(mmci_remove),
- .suspend = mmci_suspend,
- .resume = mmci_resume,
.id_table = mmci_ids,
};
-static int __init mmci_init(void)
-{
- return amba_driver_register(&mmci_driver);
-}
-
-static void __exit mmci_exit(void)
-{
- amba_driver_unregister(&mmci_driver);
-}
+module_amba_driver(mmci_driver);
-module_init(mmci_init);
-module_exit(mmci_exit);
module_param(fmax, uint, 0444);
MODULE_DESCRIPTION("ARM PrimeCell PL180/181 Multimedia Card Interface driver");
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 79e4143ab9df..d437ccf62d6b 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -13,16 +13,6 @@
#define MCI_PWR_ON 0x03
#define MCI_OD (1 << 6)
#define MCI_ROD (1 << 7)
-/*
- * The ST Micro version does not have ROD and reuse the voltage registers
- * for direction settings
- */
-#define MCI_ST_DATA2DIREN (1 << 2)
-#define MCI_ST_CMDDIREN (1 << 3)
-#define MCI_ST_DATA0DIREN (1 << 4)
-#define MCI_ST_DATA31DIREN (1 << 5)
-#define MCI_ST_FBCLKEN (1 << 7)
-#define MCI_ST_DATA74DIREN (1 << 8)
#define MMCICLOCK 0x004
#define MCI_CLK_ENABLE (1 << 8)
@@ -160,7 +150,7 @@
(MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
MCI_TXFIFOHALFEMPTYMASK)
-#define NR_SG 16
+#define NR_SG 128
struct clk;
struct variant_data;
@@ -189,7 +179,8 @@ struct mmci_host {
unsigned int mclk;
unsigned int cclk;
- u32 pwr;
+ u32 pwr_reg;
+ u32 clk_reg;
struct mmci_platform_data *plat;
struct variant_data *variant;
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index a4a1e534ed42..22bacdbf9139 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -185,18 +185,7 @@ static struct amba_driver pl030_driver = {
.id_table = pl030_ids,
};
-static int __init pl030_init(void)
-{
- return amba_driver_register(&pl030_driver);
-}
-
-static void __exit pl030_exit(void)
-{
- amba_driver_unregister(&pl030_driver);
-}
-
-module_init(pl030_init);
-module_exit(pl030_exit);
+module_amba_driver(pl030_driver);
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("ARM AMBA PL030 RTC Driver");
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 3a470e291282..692de7360e94 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -431,18 +431,7 @@ static struct amba_driver pl031_driver = {
.remove = pl031_remove,
};
-static int __init pl031_init(void)
-{
- return amba_driver_register(&pl031_driver);
-}
-
-static void __exit pl031_exit(void)
-{
- amba_driver_unregister(&pl031_driver);
-}
-
-module_init(pl031_init);
-module_exit(pl031_exit);
+module_amba_driver(pl031_driver);
MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net");
MODULE_DESCRIPTION("ARM AMBA PL031 RTC Driver");
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index eef1524ae52e..3ff9e47bd218 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -370,17 +370,7 @@ static struct amba_driver sp805_wdt_driver = {
.remove = __devexit_p(sp805_wdt_remove),
};
-static int __init sp805_wdt_init(void)
-{
- return amba_driver_register(&sp805_wdt_driver);
-}
-module_init(sp805_wdt_init);
-
-static void __exit sp805_wdt_exit(void)
-{
- amba_driver_unregister(&sp805_wdt_driver);
-}
-module_exit(sp805_wdt_exit);
+module_amba_driver(sp805_wdt_driver);
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout,
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index a9fab831caf8..7847e197730a 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -125,4 +125,13 @@ struct amba_device name##_device = { \
.periphid = id, \
}
+/*
+ * module_amba_driver() - Helper macro for drivers that don't do anything
+ * special in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces module_init()
+ * and module_exit()
+ */
+#define module_amba_driver(__amba_drv) \
+ module_driver(__amba_drv, amba_driver_register, amba_driver_unregister)
+
#endif
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index 0101e9c17fa1..32a89cf5ec45 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -6,6 +6,19 @@
#include <linux/mmc/host.h>
+
+/*
+ * These defines is places here due to access is needed from machine
+ * configuration files. The ST Micro version does not have ROD and
+ * reuse the voltage registers for direction settings.
+ */
+#define MCI_ST_DATA2DIREN (1 << 2)
+#define MCI_ST_CMDDIREN (1 << 3)
+#define MCI_ST_DATA0DIREN (1 << 4)
+#define MCI_ST_DATA31DIREN (1 << 5)
+#define MCI_ST_FBCLKEN (1 << 7)
+#define MCI_ST_DATA74DIREN (1 << 8)
+
/* Just some dummy forwarding */
struct dma_chan;
@@ -18,7 +31,8 @@ struct dma_chan;
* @ocr_mask: available voltages on the 4 pins from the block, this
* is ignored if a regulator is used, see the MMC_VDD_* masks in
* mmc/host.h
- * @vdd_handler: a callback function to translate a MMC_VDD_*
+ * @ios_handler: a callback function to act on specfic ios changes,
+ * used for example to control a levelshifter
* mask into a value to be binary (or set some other custom bits
* in MMCIPWR) or:ed and written into the MMCIPWR register of the
* block. May also control external power based on the power_mode.
@@ -31,6 +45,8 @@ struct dma_chan;
* @capabilities: the capabilities of the block as implemented in
* this platform, signify anything MMC_CAP_* from mmc/host.h
* @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h
+ * @sigdir: a bit field indicating for what bits in the MMC bus the host
+ * should enable signal direction indication.
* @dma_filter: function used to select an appropriate RX and TX
* DMA channel to be used for DMA, if and only if you're deploying the
* generic DMA engine
@@ -46,14 +62,14 @@ struct dma_chan;
struct mmci_platform_data {
unsigned int f_max;
unsigned int ocr_mask;
- u32 (*vdd_handler)(struct device *, unsigned int vdd,
- unsigned char power_mode);
+ int (*ios_handler)(struct device *, struct mmc_ios *);
unsigned int (*status)(struct device *);
int gpio_wp;
int gpio_cd;
bool cd_invert;
unsigned long capabilities;
unsigned long capabilities2;
+ u32 sigdir;
bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
void *dma_rx_param;
void *dma_tx_param;
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index b37b702a3a6a..5119fdabcb98 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -1110,18 +1110,7 @@ static struct amba_driver aaci_driver = {
.id_table = aaci_ids,
};
-static int __init aaci_init(void)
-{
- return amba_driver_register(&aaci_driver);
-}
-
-static void __exit aaci_exit(void)
-{
- amba_driver_unregister(&aaci_driver);
-}
-
-module_init(aaci_init);
-module_exit(aaci_exit);
+module_amba_driver(aaci_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ARM PrimeCell PL041 Advanced Audio CODEC Interface driver");