diff options
| author | Bjorn Andersson <bjorn.andersson@sonymobile.com> | 2015-08-18 15:14:06 -0700 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2015-09-17 12:14:12 +0100 |
| commit | b263d20373d7726dd3ac0cd5e32f123e69a02847 (patch) | |
| tree | 03fb36f2615a14c30a504419f8083a4d1e75dd06 | |
| parent | 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f (diff) | |
| download | linux-b263d20373d7726dd3ac0cd5e32f123e69a02847.tar.bz2 | |
regulator: Introduce property to flag set-load support
Introduce "regulator-allow-set-load" property to make it possible to
flag in the board configuration that a regulator is allowed to have the
load requirements changed.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/regulator.txt | 1 | ||||
| -rw-r--r-- | drivers/regulator/of_regulator.c | 3 |
2 files changed, 4 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 24bd422cecd5..1d112fc456aa 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -11,6 +11,7 @@ Optional properties: - regulator-always-on: boolean, regulator should never be disabled - regulator-boot-on: bootloader/firmware enabled regulator - regulator-allow-bypass: allow the regulator to go into bypass mode +- regulator-allow-set-load: allow the regulator performance level to be configured - <name>-supply: phandle to the parent supply/regulator node - regulator-ramp-delay: ramp delay for regulator(in uV/uS) For hardware which supports disabling ramp rate, it should be explicitly diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 250700c853bf..499e437c7e91 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -76,6 +76,9 @@ static void of_get_regulation_constraints(struct device_node *np, if (of_property_read_bool(np, "regulator-allow-bypass")) constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS; + if (of_property_read_bool(np, "regulator-allow-set-load")) + constraints->valid_ops_mask |= REGULATOR_CHANGE_DRMS; + ret = of_property_read_u32(np, "regulator-ramp-delay", &pval); if (!ret) { if (pval) |