Merge tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu into next/dt

Merge "mvebu dt changes for v3.15 (incremental #4)" from Jason Cooper:

 - dove
    - add system controller node
    - drop pinctrl PMU reg property _before_ it hits mainline and becomes ABI

 - mvebu
    - XP/370
       - change default PCIe apertures
       - switch GP and DB boards internal registers to 0xf1000000
       - correct RAM size on Matrix board
    - 385
       - correct phy connection type for DB board
       - add RD board

* tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu:
  ARM: dove: drop pinctrl PMU reg property
  ARM: mvebu: add Device Tree for the Armada 385 RD board
  ARM: mvebu: use the correct phy connection mode on Armada 385 DB
  ARM: mvebu: the Armada XP Matrix board has 4 GB
  ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000
  ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000
  ARM: mvebu: change the default PCIe apertures for Armada 370/XP
  ARM: dove: add system controller node

Conflicts:
	arch/arm/boot/dts/Makefile

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

8 files changed, 144 insertions, 21 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3d34936fb476..9dfc2d44baaf 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -55,11 +55,6 @@ dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2cd-google-chromecast.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
 	da850-evm.dtb
-dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
-	dove-cubox.dtb \
-	dove-d2plug.dtb \
-	dove-d3plug.dtb \
-	dove-dove-db.dtb
 dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
@@ -378,7 +373,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
 dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_38X) += \
-	armada-385-db.dtb
+	armada-385-db.dtb \
+	armada-385-rd.dtb
 dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
@@ -386,6 +382,11 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-netgear-rn2120.dtb \
 	armada-xp-matrix.dtb \
 	armada-xp-openblocks-ax3-4.dtb
+dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
+	dove-cubox.dtb \
+	dove-d2plug.dtb \
+	dove-d3plug.dtb \
+	dove-dove-db.dtb
 
 targets += dtbs
 targets += $(dtb-y)
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 7bbc4ac997fb..bbb40f62037d 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -44,8 +44,8 @@
 		#size-cells = <1>;
 		controller = <&mbusc>;
 		interrupt-parent = <&mpic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
+		pcie-mem-aperture = <0xf8000000 0x7e00000>;
+		pcie-io-aperture  = <0xffe00000 0x100000>;
 
 		devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
index 01b6cc76ddc8..9a136428ec29 100644
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -62,13 +62,13 @@
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy1>;
-				phy-mode = "rgmii";
+				phy-mode = "rgmii-id";
 			};
 
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
-				phy-mode = "rgmii";
+				phy-mode = "rgmii-id";
 			};
 
 			mdio {
diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts
new file mode 100644
index 000000000000..45250c88814b
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-rd.dts
@@ -0,0 +1,94 @@
+/*
+ * Device Tree file for Marvell Armada 385 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Reference Design";
+	compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada38x";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index bcf6d79a57ec..448373c4b0e5 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -2,7 +2,7 @@
  * Device Tree file for Marvell Armada XP evaluation board
  * (DB-78460-BP)
  *
- * Copyright (C) 2012 Marvell
+ * Copyright (C) 2012-2014 Marvell
  *
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
@@ -11,6 +11,15 @@
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
+  *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
  */
 
 /dts-v1/;
@@ -30,7 +39,7 @@
 	};
 
 	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
 
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 274e2ad5f51c..61bda687f782 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -2,7 +2,7 @@
  * Device Tree file for Marvell Armada XP development board
  * (DB-MV784MP-GP)
  *
- * Copyright (C) 2013 Marvell
+ * Copyright (C) 2013-2014 Marvell
  *
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
@@ -11,6 +11,15 @@
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
  */
 
 /dts-v1/;
@@ -30,16 +39,17 @@
                  * 8 GB of plug-in RAM modules by default.The amount
                  * of memory available can be changed by the
                  * bootloader according the size of the module
-                 * actually plugged. Only 7GB are usable because
-                 * addresses from 0xC0000000 to 0xffffffff are used by
-                 * the internal registers of the SoC.
+                 * actually plugged. However, memory between
+                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
+                 * the address range used for I/O (internal registers,
+                 * MBus windows).
 		 */
-		reg = <0x00000000 0x00000000 0x00000000 0xC0000000>,
+		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
 		      <0x00000001 0x00000000 0x00000001 0x00000000>;
 	};
 
 	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
 
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index e47c49ecd55c..c2242745b9b8 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -23,7 +23,12 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
+		/*
+		 * This board has 4 GB of RAM, but the last 256 MB of
+		 * RAM are not usable due to the overlap with the MBus
+		 * Window address range
+		 */
+		reg = <0 0x00000000 0 0xf0000000>;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 43cbdc2366b3..3b891dd20993 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -186,6 +186,11 @@
 				reg = <0x20000 0x80>, <0x800100 0x8>;
 			};
 
+			sysc: system-ctrl@20000 {
+				compatible = "marvell,orion-system-controller";
+				reg = <0x20000 0x110>;
+			};
+
 			bridge_intc: bridge-interrupt-ctrl@20110 {
 				compatible = "marvell,orion-bridge-intc";
 				interrupt-controller;
@@ -390,8 +395,7 @@
 			pinctrl: pin-ctrl@d0200 {
 				compatible = "marvell,dove-pinctrl";
 				reg = <0xd0200 0x14>,
-				      <0xd0440 0x04>,
-				      <0xd802c 0x08>;
+				      <0xd0440 0x04>;
 				clocks = <&gate_clk 22>;
 
 				pmx_gpio_0: pmx-gpio-0 {