diff options
| author | Brian Masney <masneyb@onstation.org> | 2019-01-19 15:42:45 -0500 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2019-01-24 15:33:33 +0100 |
| commit | 5f540fb4821a5444350ab3311fff60013d755d8f (patch) | |
| tree | 50fc1bd3b93ce3903bb8e6791d576daaff3762e8 | |
| parent | ca69e2d165eb3d060cc9ad70a745e27a2cf4310b (diff) | |
| download | linux-5f540fb4821a5444350ab3311fff60013d755d8f.tar.bz2 | |
ARM: dts: qcom: pm8941: add interrupt controller properties
Add interrupt controller properties now that spmi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it. Code was tested on the LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| -rw-r--r-- | arch/arm/boot/dts/qcom-pm8941.dtsi | 38 |
1 files changed, 2 insertions, 36 deletions
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 2515c5c217ac..e65049e0fb45 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -64,42 +64,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>, - <0 0xd6 0 IRQ_TYPE_NONE>, - <0 0xd7 0 IRQ_TYPE_NONE>, - <0 0xd8 0 IRQ_TYPE_NONE>, - <0 0xd9 0 IRQ_TYPE_NONE>, - <0 0xda 0 IRQ_TYPE_NONE>, - <0 0xdb 0 IRQ_TYPE_NONE>, - <0 0xdc 0 IRQ_TYPE_NONE>, - <0 0xdd 0 IRQ_TYPE_NONE>, - <0 0xde 0 IRQ_TYPE_NONE>, - <0 0xdf 0 IRQ_TYPE_NONE>, - <0 0xe0 0 IRQ_TYPE_NONE>, - <0 0xe1 0 IRQ_TYPE_NONE>, - <0 0xe2 0 IRQ_TYPE_NONE>, - <0 0xe3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; boost_bypass_n_pin: boost-bypass { pins = "gpio21"; |