diff options
author | Lv Zheng <lv.zheng@intel.com> | 2017-01-04 11:17:17 +0800 |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2017-01-30 12:12:03 +0100 |
commit | 4c237371f290d1ed3b2071dd43554362137b1cce (patch) | |
tree | c0b540e52915af1d41e5f3c7b8ba71afec42ce75 | |
parent | 566cf877a1fcb6d6dc0126b076aad062054c2637 (diff) | |
download | linux-4c237371f290d1ed3b2071dd43554362137b1cce.tar.bz2 |
ACPI / EC: Remove old CLEAR_ON_RESUME quirk
IRQ polling logic has been implemented to drain the post-boot/resume
EC events:
1. Triggered by the following code, invoked from acpi_ec_enable_event():
if (!test_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
advance_transaction(ec);
2. Drained by the following code, invoked after acpi_ec_complete_query():
if (status & ACPI_EC_FLAG_SCI)
acpi_ec_submit_query(ec);
This facility is safer than the old CLEAR_ON_RESUME quirk as the
CLEAR_ON_RESUME quirk sends EC query commands unconditionally. The
behavior is apparently not suitable for firmware that requires
QUERY_HANDSHAKE quirk. Though the QUERY_HANDSHAKE quirk isn't used
now because of the improvement done in the EC transaction state
machine (ec_event_clearing=QUERY), it is the proof that we cannot
send EC query command unconditionally.
So it's time to delete the out-dated CLEAR_ON_RESUME quirk to let the
users to try the newer approach.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=191211
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-rw-r--r-- | drivers/acpi/ec.c | 53 |
1 files changed, 0 insertions, 53 deletions
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 48e19d013170..6a32cd4ec9da 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -188,7 +188,6 @@ EXPORT_SYMBOL(first_ec); static bool boot_ec_is_ecdt = false; static struct workqueue_struct *ec_query_wq; -static int EC_FLAGS_CLEAR_ON_RESUME; /* Needs acpi_ec_clear() on boot/resume */ static int EC_FLAGS_QUERY_HANDSHAKE; /* Needs QR_EC issued when SCI_EVT set */ static int EC_FLAGS_CORRECT_ECDT; /* Needs ECDT port address correction */ @@ -492,26 +491,6 @@ static inline void __acpi_ec_disable_event(struct acpi_ec *ec) ec_log_drv("event blocked"); } -/* - * Process _Q events that might have accumulated in the EC. - * Run with locked ec mutex. - */ -static void acpi_ec_clear(struct acpi_ec *ec) -{ - int i, status; - u8 value = 0; - - for (i = 0; i < ACPI_EC_CLEAR_MAX; i++) { - status = acpi_ec_query(ec, &value); - if (status || !value) - break; - } - if (unlikely(i == ACPI_EC_CLEAR_MAX)) - pr_warn("Warning: Maximum of %d stale EC events cleared\n", i); - else - pr_info("%d stale EC events cleared\n", i); -} - static void acpi_ec_enable_event(struct acpi_ec *ec) { unsigned long flags; @@ -520,10 +499,6 @@ static void acpi_ec_enable_event(struct acpi_ec *ec) if (acpi_ec_started(ec)) __acpi_ec_enable_event(ec); spin_unlock_irqrestore(&ec->lock, flags); - - /* Drain additional events if hardware requires that */ - if (EC_FLAGS_CLEAR_ON_RESUME) - acpi_ec_clear(ec); } #ifdef CONFIG_PM_SLEEP @@ -1741,31 +1716,6 @@ static int ec_flag_query_handshake(const struct dmi_system_id *id) #endif /* - * On some hardware it is necessary to clear events accumulated by the EC during - * sleep. These ECs stop reporting GPEs until they are manually polled, if too - * many events are accumulated. (e.g. Samsung Series 5/9 notebooks) - * - * https://bugzilla.kernel.org/show_bug.cgi?id=44161 - * - * Ideally, the EC should also be instructed NOT to accumulate events during - * sleep (which Windows seems to do somehow), but the interface to control this - * behaviour is not known at this time. - * - * Models known to be affected are Samsung 530Uxx/535Uxx/540Uxx/550Pxx/900Xxx, - * however it is very likely that other Samsung models are affected. - * - * On systems which don't accumulate _Q events during sleep, this extra check - * should be harmless. - */ -static int ec_clear_on_resume(const struct dmi_system_id *id) -{ - pr_debug("Detected system needing EC poll on resume.\n"); - EC_FLAGS_CLEAR_ON_RESUME = 1; - ec_event_clearing = ACPI_EC_EVT_TIMING_STATUS; - return 0; -} - -/* * Some ECDTs contain wrong register addresses. * MSI MS-171F * https://bugzilla.kernel.org/show_bug.cgi?id=12461 @@ -1782,9 +1732,6 @@ static struct dmi_system_id ec_dmi_table[] __initdata = { ec_correct_ecdt, "MSI MS-171F", { DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star"), DMI_MATCH(DMI_PRODUCT_NAME, "MS-171F"),}, NULL}, - { - ec_clear_on_resume, "Samsung hardware", { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD.")}, NULL}, {}, }; |