summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAndy Fleming <afleming@freescale.com>2011-11-11 05:10:39 +0000
committerDavid S. Miller <davem@davemloft.net>2011-12-07 13:54:57 -0500
commit28d8ea2d568534026ccda3e8936f5ea1e04a86a1 (patch)
treed7c78af7617d8251a34bf332cebede6a68b7312c
parenta454daceb78844a09c08b6e2d8badcb76a5d73b9 (diff)
downloadlinux-28d8ea2d568534026ccda3e8936f5ea1e04a86a1.tar.bz2
fsl_pq_mdio: Clean up tbi address configuration
The code for setting the address of the internal TBI PHY was convoluted enough without a maze of ifdefs. Clean it up a bit so we allow the logic to fail down to -ENODEV at the end of the if/else ladder, rather than using ifdefs to repeat the same failure code over and over. Also, remove the support for the auto-configuration. I'm not aware of anyone using it, and it ends up using the bus mutex before it's been initialized. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/freescale/fsl_pq_mdio.c53
1 files changed, 8 insertions, 45 deletions
diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
index 52f4e8ad48e7..4d9f84b8ab97 100644
--- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c
+++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
@@ -183,28 +183,10 @@ void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
}
EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name);
-/* Scan the bus in reverse, looking for an empty spot */
-static int fsl_pq_mdio_find_free(struct mii_bus *new_bus)
-{
- int i;
-
- for (i = PHY_MAX_ADDR; i > 0; i--) {
- u32 phy_id;
-
- if (get_phy_id(new_bus, i, &phy_id))
- return -1;
-
- if (phy_id == 0xffffffff)
- break;
- }
-
- return i;
-}
-
-#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np)
{
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
struct gfar __iomem *enet_regs;
/*
@@ -220,15 +202,15 @@ static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct devi
} else if (of_device_is_compatible(np, "fsl,etsec2-mdio") ||
of_device_is_compatible(np, "fsl,etsec2-tbi")) {
return of_iomap(np, 1);
- } else
- return NULL;
-}
+ }
#endif
+ return NULL;
+}
-#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
{
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
struct device_node *np = NULL;
int err = 0;
@@ -261,9 +243,10 @@ static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
return err;
else
return -EINVAL;
-}
+#else
+ return -ENODEV;
#endif
-
+}
static int fsl_pq_mdio_probe(struct platform_device *ofdev)
{
@@ -339,19 +322,13 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev)
of_device_is_compatible(np, "fsl,etsec2-mdio") ||
of_device_is_compatible(np, "fsl,etsec2-tbi") ||
of_device_is_compatible(np, "gianfar")) {
-#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
tbipa = get_gfar_tbipa(regs, np);
if (!tbipa) {
err = -EINVAL;
goto err_free_irqs;
}
-#else
- err = -ENODEV;
- goto err_free_irqs;
-#endif
} else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
of_device_is_compatible(np, "ucc_geth_phy")) {
-#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
u32 id;
static u32 mii_mng_master;
@@ -364,10 +341,6 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev)
mii_mng_master = id;
ucc_set_qe_mux_mii_mng(id - 1);
}
-#else
- err = -ENODEV;
- goto err_free_irqs;
-#endif
} else {
err = -ENODEV;
goto err_free_irqs;
@@ -386,16 +359,6 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev)
}
if (tbiaddr == -1) {
- out_be32(tbipa, 0);
-
- tbiaddr = fsl_pq_mdio_find_free(new_bus);
- }
-
- /*
- * We define TBIPA at 0 to be illegal, opting to fail for boards that
- * have PHYs at 1-31, rather than change tbipa and rescan.
- */
- if (tbiaddr == 0) {
err = -EBUSY;
goto err_free_irqs;