diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-02-13 08:24:50 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-02-13 08:24:50 +0100 |
commit | 277c8e8b81d61f3314c3765f332ac7ce9da2cac0 (patch) | |
tree | 0c446fbc2f7e71c77d9e03a5c9a20b43679fcb4c | |
parent | 209312369e6d214e6db46f46ec95413ed5a4a2d6 (diff) | |
parent | 103cda6a3b8d2c10d5f8cd7abad118e9db8f4776 (diff) | |
download | linux-277c8e8b81d61f3314c3765f332ac7ce9da2cac0.tar.bz2 |
Merge tag 'iio-for-5.1b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new device support, features and cleanup for IIO in the 5.1 cycle.
There are a few late breaking fixes in here that weren't worth trying to
rush into 5.0 as they have been with us for quite a while.
New device support
* ad7476
- add support for TI ADS786X parts that are compatible with this Analog
Devices driver. Good to see some simple devices are so similar.
* Ingenic jz47xx SoC ADCs
- new driver and bindings
* Plantower PMS7003 partical sensor
- new driver and bindings including vendor prefix.
* TI DAC7612
- new driver and bindings for this dual DAC.
New features
* ad7768-1
- Sampling frequency control
* bmi160
- Data ready trigger support, including open-drain dt binding.
Cleanup / minor fixes.
* Analog Device DACs
- Fix some inconsistent licenses. These are only ones where there were
two different license marked in the same file, and hence were previously
unclear.
* ads124s08
- Spelling fix.
* adxl345
- Parameter alignement tidy up.
* bmi160
- SPDX
- correct a note on the types of supported interrupts which was too strict.
- use iio_pollfunc_store_time to grab an earlier timestamp.
- use if (ret) instead of if (ret < 0) to be consistent whilst simplifying
some handling where ret was effectively getting written to 0 even though
it was always already 0.
* exynos_adc
- Fix a null pointer dereference on unbind.
- Fix number of channels on Exynos4x12 devices to be 4 rather than 8.
* lpc32xx-adc
- Move DT bindings doc out of staging. Oops, I missed this one when
moving the driver.
- SPDX.
* npcm-adc
- drop documentation of reset node as going to be done differently.
It's a new driver this cycle so no need to support the previous
binding going forwards.
* sps30
- Fix an issue with a loop timeout test that meant it would never identify
a timeout.
- Mark deliberate switch fall throughs.
* tag 'iio-for-5.1b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
iio: adc: exynos-adc: Use proper number of channels for Exynos4x12
dt-binding: iio: remove rst node from NPCM ADC document
dt-bindings: iio: chemical: pms7003: add device tree support
dt-bindings: add Plantower to the vendor prefixes
iio: chemical: add support for Plantower PMS7003 sensor
iio:chemical:sps30 Supress some switch fallthrough warnings.
iio:adc:lpc32xx use SPDX-License-Identifier
dt-bindings: iio: adc: move lpc32xx-adc out of staging
iio: adc: ads124s08: fix spelling mistake "converions" -> "conversions"
iio: adc: exynos-adc: Fix NULL pointer exception on unbind
iio: chemical: sps30: fix a loop timeout test
iio:accel:adxl345: Change alignment to match paranthesis
iio:dac:dac7612: device tree bindings
iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
iio: adc: ad7476: Add support for TI ADS786X ADCs
iio: adc: ad7768-1: Add support for setting the sampling frequency
drivers: iio: dac: Fix wrong license for ADI drivers
IIO: add Ingenic JZ47xx ADC driver.
dt-bindings: iio/adc: Add bindings for Ingenic JZ47xx SoCs ADC.
dt-bindings: iio/adc: Add docs for Ingenic JZ47xx SoCs ADC.
...
35 files changed, 1601 insertions, 85 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt new file mode 100644 index 000000000000..f01159f20d87 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt @@ -0,0 +1,48 @@ +* Ingenic JZ47xx ADC controller IIO bindings + +Required properties: + +- compatible: Should be one of: + * ingenic,jz4725b-adc + * ingenic,jz4740-adc +- reg: ADC controller registers location and length. +- clocks: phandle to the SoC's ADC clock. +- clock-names: Must be set to "adc". +- #io-channel-cells: Must be set to <1> to indicate channels are selected + by index. + +ADC clients must use the format described in iio-bindings.txt, giving +a phandle and IIO specifier pair ("io-channels") to the ADC controller. + +Example: + +#include <dt-bindings/iio/adc/ingenic,adc.h> + +adc: adc@10070000 { + compatible = "ingenic,jz4740-adc"; + #io-channel-cells = <1>; + + reg = <0x10070000 0x30>; + + clocks = <&cgu JZ4740_CLK_ADC>; + clock-names = "adc"; + + interrupt-parent = <&intc>; + interrupts = <18>; +}; + +adc-keys { + ... + compatible = "adc-keys"; + io-channels = <&adc INGENIC_ADC_AUX>; + io-channel-names = "buttons"; + ... +}; + +battery { + ... + compatible = "ingenic,jz4740-battery"; + io-channels = <&adc INGENIC_ADC_BATTERY>; + io-channel-names = "battery"; + ... +}; diff --git a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt index b3629d3a9adf..b3629d3a9adf 100644 --- a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt index 1b8132cd9060..eb939fe77836 100644 --- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt @@ -14,11 +14,6 @@ Optional properties: vref-supply is not added the ADC will use internal voltage reference. -Required Node in the NPCM7xx BMC: -An additional register is present in the NPCM7xx SOC which is -assumed to be in the same device tree, with and marked as -compatible with "nuvoton,npcm750-rst". - Example: adc: adc@f000c000 { @@ -27,9 +22,3 @@ adc: adc@f000c000 { interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk NPCM7XX_CLK_ADC>; }; - -rst: rst@f0801000 { - compatible = "nuvoton,npcm750-rst", "syscon", - "simple-mfd"; - reg = <0xf0801000 0x6C>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt index a10c1f89037d..e1fe02f3e3e9 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt @@ -11,11 +11,13 @@ New driver handles the following Required properties: - compatible: Must be "samsung,exynos-adc-v1" - for exynos4412/5250 controllers. + for Exynos5250 controllers. Must be "samsung,exynos-adc-v2" for future controllers. Must be "samsung,exynos3250-adc" for controllers compatible with ADC of Exynos3250. + Must be "samsung,exynos4212-adc" for + controllers compatible with ADC of Exynos4212 and Exynos4412. Must be "samsung,exynos7-adc" for the ADC in Exynos7 and compatibles Must be "samsung,s3c2410-adc" for diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt new file mode 100644 index 000000000000..7b5f06f324c8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt @@ -0,0 +1,20 @@ +* Plantower PMS7003 particulate matter sensor + +Required properties: +- compatible: must be "plantower,pms7003" +- vcc-supply: phandle to the regulator that provides power to the sensor + +Optional properties: +- plantower,set-gpios: phandle to the GPIO connected to the SET line +- reset-gpios: phandle to the GPIO connected to the RESET line + +Refer to serial/slave-device.txt for generic serial attached device bindings. + +Example: + +&uart0 { + air-pollution-sensor { + compatible = "plantower,pms7003"; + vcc-supply = <®_vcc5v0>; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt new file mode 100644 index 000000000000..639c94ed83e9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt @@ -0,0 +1,28 @@ +* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter + +The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed +12-bit monotonicity performance over the industrial temperature range. +Is is programmable through an SPI interface. + +The internal DACs are loaded when the LOADDACS pin is pulled down. + +http://www.ti.com/lit/ds/sbas106/sbas106.pdf + +Required Properties: +- compatible: Should be one of: + "ti,dac7612" + "ti,dac7612u" + "ti,dac7612ub" +- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional Properties: +- ti,loaddacs-gpios: GPIO descriptor for the LOADDACS pin. +- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: + + dac@1 { + compatible = "ti,dac7612"; + reg = <0x1>; + ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt index 0c1c105fb503..900c169de00f 100644 --- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt +++ b/Documentation/devicetree/bindings/iio/imu/bmi160.txt @@ -9,9 +9,11 @@ Required properties: - spi-max-frequency : set maximum clock frequency (only for SPI) Optional properties: - - interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW + - interrupts : interrupt mapping for IRQ - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt input, set to "INT2" if INT2 pin should be used instead + - drive-open-drain : set if the specified interrupt pin should be configured as + open drain. If not set, defaults to push-pull. Examples: @@ -20,7 +22,7 @@ bmi160@68 { reg = <0x68>; interrupt-parent = <&gpio4>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; interrupt-names = "INT1"; }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 389508584f48..42816baeb381 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -304,6 +304,7 @@ phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd pine64 Pine64 pixcir PIXCIR MICROELECTRONICS Co., Ltd +plantower Plantower Co., Ltd plathome Plat'Home Co., Ltd. plda PLDA plx Broadcom Corporation (formerly PLX Technology) diff --git a/MAINTAINERS b/MAINTAINERS index 08e4cafd083c..efe05fc1688c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15105,6 +15105,13 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Maintained F: sound/soc/ti/ +Texas Instruments' DAC7612 DAC Driver +M: Ricardo Ribalda <ricardo@ribalda.com> +L: linux-iio@vger.kernel.org +S: Supported +F: drivers/iio/dac/ti-dac7612.c +F: Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt + THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER M: Hans Verkuil <hverkuil@xs4all.nl> L: linux-media@vger.kernel.org diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c index 780f87f72338..f03ed00685ea 100644 --- a/drivers/iio/accel/adxl345_core.c +++ b/drivers/iio/accel/adxl345_core.c @@ -150,8 +150,8 @@ static int adxl345_read_raw(struct iio_dev *indio_dev, } static int adxl345_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, int val2, long mask) + struct iio_chan_spec const *chan, + int val, int val2, long mask) { struct adxl345_data *data = iio_priv(indio_dev); s64 n; diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 46ed6fa7e3f3..5debc67df70a 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -57,14 +57,17 @@ config AD7298 module will be called ad7298. config AD7476 - tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" + tristate "Analog Devices AD7476 1-channel ADCs driver and other similar devices from AD an TI" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to build support for Analog Devices AD7273, AD7274, AD7276, - AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, - AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). + Say yes here to build support for the following SPI analog to + digital converters (ADCs): + Analog Devices: AD7273, AD7274, AD7276, AD7277, AD7278, AD7475, + AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, AD7495, AD7910, + AD7920. + Texas Instruments: ADS7866, ADS7867, ADS7868. To compile this driver as a module, choose M here: the module will be called ad7476. @@ -407,6 +410,15 @@ config INA2XX_ADC Say yes here to build support for TI INA2xx family of Power Monitors. This driver is mutually exclusive with the HWMON version. +config INGENIC_ADC + tristate "Ingenic JZ47xx SoCs ADC driver" + depends on MIPS || COMPILE_TEST + help + Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit. + + This driver can also be built as a module. If so, the module will be + called ingenic_adc. + config IMX7D_ADC tristate "Freescale IMX7D ADC driver" depends on ARCH_MXC || COMPILE_TEST diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 79d6511f0af3..d50eb47da484 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_HI8435) += hi8435.o obj-$(CONFIG_HX711) += hx711.o obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o +obj-$(CONFIG_INGENIC_ADC) += ingenic-adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c index 0549686b9ef8..76747488044b 100644 --- a/drivers/iio/adc/ad7476.c +++ b/drivers/iio/adc/ad7476.c @@ -59,6 +59,9 @@ enum ad7476_supported_device_ids { ID_ADC081S, ID_ADC101S, ID_ADC121S, + ID_ADS7866, + ID_ADS7867, + ID_ADS7868, }; static irqreturn_t ad7476_trigger_handler(int irq, void *p) @@ -157,6 +160,8 @@ static int ad7476_read_raw(struct iio_dev *indio_dev, #define AD7940_CHAN(bits) _AD7476_CHAN((bits), 15 - (bits), \ BIT(IIO_CHAN_INFO_RAW)) #define AD7091R_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), 0) +#define ADS786X_CHAN(bits) _AD7476_CHAN((bits), 12 - (bits), \ + BIT(IIO_CHAN_INFO_RAW)) static const struct ad7476_chip_info ad7476_chip_info_tbl[] = { [ID_AD7091R] = { @@ -209,6 +214,18 @@ static const struct ad7476_chip_info ad7476_chip_info_tbl[] = { .channel[0] = ADC081S_CHAN(12), .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), }, + [ID_ADS7866] = { + .channel[0] = ADS786X_CHAN(12), + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), + }, + [ID_ADS7867] = { + .channel[0] = ADS786X_CHAN(10), + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), + }, + [ID_ADS7868] = { + .channel[0] = ADS786X_CHAN(8), + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), + }, }; static const struct iio_info ad7476_info = { @@ -314,6 +331,9 @@ static const struct spi_device_id ad7476_id[] = { {"adc081s", ID_ADC081S}, {"adc101s", ID_ADC101S}, {"adc121s", ID_ADC121S}, + {"ads7866", ID_ADS7866}, + {"ads7867", ID_ADS7867}, + {"ads7868", ID_ADS7868}, {} }; MODULE_DEVICE_TABLE(spi, ad7476_id); diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c index 78449e90b2f5..0d132708c429 100644 --- a/drivers/iio/adc/ad7768-1.c +++ b/drivers/iio/adc/ad7768-1.c @@ -9,6 +9,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/err.h> +#include <linux/gpio/consumer.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/regulator/consumer.h> @@ -59,6 +60,18 @@ #define AD7768_REG_DIG_DIAG_STATUS 0x30 #define AD7768_REG_MCLK_COUNTER 0x31 +/* AD7768_REG_POWER_CLOCK */ +#define AD7768_PWR_MCLK_DIV_MSK GENMASK(5, 4) +#define AD7768_PWR_MCLK_DIV(x) FIELD_PREP(AD7768_PWR_MCLK_DIV_MSK, x) +#define AD7768_PWR_PWRMODE_MSK GENMASK(1, 0) +#define AD7768_PWR_PWRMODE(x) FIELD_PREP(AD7768_PWR_PWRMODE_MSK, x) + +/* AD7768_REG_DIGITAL_FILTER */ +#define AD7768_DIG_FIL_FIL_MSK GENMASK(6, 4) +#define AD7768_DIG_FIL_FIL(x) FIELD_PREP(AD7768_DIG_FIL_FIL_MSK, x) +#define AD7768_DIG_FIL_DEC_MSK GENMASK(2, 0) +#define AD7768_DIG_FIL_DEC_RATE(x) FIELD_PREP(AD7768_DIG_FIL_DEC_MSK, x) + /* AD7768_REG_CONVERSION */ #define AD7768_CONV_MODE_MSK GENMASK(2, 0) #define AD7768_CONV_MODE(x) FIELD_PREP(AD7768_CONV_MODE_MSK, x) @@ -80,11 +93,51 @@ enum ad7768_pwrmode { AD7768_FAST_MODE = 3 }; +enum ad7768_mclk_div { + AD7768_MCLK_DIV_16, + AD7768_MCLK_DIV_8, + AD7768_MCLK_DIV_4, + AD7768_MCLK_DIV_2 +}; + +enum ad7768_dec_rate { + AD7768_DEC_RATE_32 = 0, + AD7768_DEC_RATE_64 = 1, + AD7768_DEC_RATE_128 = 2, + AD7768_DEC_RATE_256 = 3, + AD7768_DEC_RATE_512 = 4, + AD7768_DEC_RATE_1024 = 5, + AD7768_DEC_RATE_8 = 9, + AD7768_DEC_RATE_16 = 10 +}; + +struct ad7768_clk_configuration { + enum ad7768_mclk_div mclk_div; + enum ad7768_dec_rate dec_rate; + unsigned int clk_div; + enum ad7768_pwrmode pwrmode; +}; + +static const struct ad7768_clk_configuration ad7768_clk_config[] = { + { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_8, 16, AD7768_FAST_MODE }, + { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_16, 32, AD7768_FAST_MODE }, + { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_32, 64, AD7768_FAST_MODE }, + { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_64, 128, AD7768_FAST_MODE }, + { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_128, 256, AD7768_FAST_MODE }, + { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_128, 512, AD7768_MED_MODE }, + { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_256, 1024, AD7768_MED_MODE }, + { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_512, 2048, AD7768_MED_MODE }, + { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_1024, 4096, AD7768_MED_MODE }, + { AD7768_MCLK_DIV_8, AD7768_DEC_RATE_1024, 8192, AD7768_MED_MODE }, + { AD7768_MCLK_DIV_16, AD7768_DEC_RATE_1024, 16384, AD7768_ECO_MODE }, +}; + static const struct iio_chan_spec ad7768_channels[] = { { .type = IIO_VOLTAGE, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), .indexed = 1, .channel = 0, .scan_index = 0, @@ -102,8 +155,12 @@ struct ad7768_state { struct spi_device *spi; struct regulator *vref; struct mutex lock; + struct clk *mclk; + unsigned int mclk_freq; + unsigned int samp_freq; struct completion completion; struct iio_trigger *trig; + struct gpio_desc *gpio_sync_in; /* * DMA (thus cache coherency maintenance) requires the * transfer buffers to live in their own cache lines. @@ -210,6 +267,90 @@ err_unlock: return ret; } +static int ad7768_set_dig_fil(struct ad7768_state *st, + enum ad7768_dec_rate dec_rate) +{ + unsigned int mode; + int ret; + + if (dec_rate == AD7768_DEC_RATE_8 || dec_rate == AD7768_DEC_RATE_16) + mode = AD7768_DIG_FIL_FIL(dec_rate); + else + mode = AD7768_DIG_FIL_DEC_RATE(dec_rate); + + ret = ad7768_spi_reg_write(st, AD7768_REG_DIGITAL_FILTER, mode); + if (ret < 0) + return ret; + + /* A sync-in pulse is required every time the filter dec rate changes */ + gpiod_set_value(st->gpio_sync_in, 1); + gpiod_set_value(st->gpio_sync_in, 0); + + return 0; +} + +static int ad7768_set_freq(struct ad7768_state *st, + unsigned int freq) +{ + unsigned int diff_new, diff_old, pwr_mode, i, idx; + int res, ret; + + diff_old = U32_MAX; + idx = 0; + + res = DIV_ROUND_CLOSEST(st->mclk_freq, freq); + + /* Find the closest match for the desired sampling frequency */ + for (i = 0; i < ARRAY_SIZE(ad7768_clk_config); i++) { + diff_new = abs(res - ad7768_clk_config[i].clk_div); + if (diff_new < diff_old) { + diff_old = diff_new; + idx = i; + } + } + + /* + * Set both the mclk_div and pwrmode with a single write to the + * POWER_CLOCK register + */ + pwr_mode = AD7768_PWR_MCLK_DIV(ad7768_clk_config[idx].mclk_div) | + AD7768_PWR_PWRMODE(ad7768_clk_config[idx].pwrmode); + ret = ad7768_spi_reg_write(st, AD7768_REG_POWER_CLOCK, pwr_mode); + if (ret < 0) + return ret; + + ret = ad7768_set_dig_fil(st, ad7768_clk_config[idx].dec_rate); + if (ret < 0) + return ret; + + st->samp_freq = DIV_ROUND_CLOSEST(st->mclk_freq, + ad7768_clk_config[idx].clk_div); + + return 0; +} + +static ssize_t ad7768_sampling_freq_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad7768_state *st = iio_priv(indio_dev); + unsigned int freq; + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(ad7768_clk_config); i++) { + freq = DIV_ROUND_CLOSEST(st->mclk_freq, + ad7768_clk_config[i].clk_div); + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", freq); + } + + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(ad7768_sampling_freq_avail); + static int ad7768_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long info) @@ -242,13 +383,43 @@ static int ad7768_read_raw(struct iio_dev *indio_dev, *val2 = chan->scan_type.realbits; return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = st->samp_freq; + + return IIO_VAL_INT; } return -EINVAL; } +static int ad7768_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long info) +{ + struct ad7768_state *st = iio_priv(indio_dev); + + switch (info) { + case IIO_CHAN_INFO_SAMP_FREQ: + return ad7768_set_freq(st, val); + default: + return -EINVAL; + } +} + +static struct attribute *ad7768_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad7768_group = { + .attrs = ad7768_attributes, +}; + static const struct iio_info ad7768_info = { + .attrs = &ad7768_group, .read_raw = &ad7768_read_raw, + .write_raw = &ad7768_write_raw, .debugfs_reg_access = &ad7768_reg_access, }; @@ -270,9 +441,13 @@ static int ad7768_setup(struct ad7768_state *st) if (ret) return ret; - /* Set power mode to fast */ - return ad7768_spi_reg_write(st, AD7768_REG_POWER_CLOCK, - AD7768_FAST_MODE); + st->gpio_sync_in = devm_gpiod_get(&st->spi->dev, "adi,sync-in", + GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_sync_in)) + return PTR_ERR(st->gpio_sync_in); + + /* Set the default sampling frequency to 32000 kSPS */ + return ad7768_set_freq(st, 32000); } static irqreturn_t ad7768_trigger_handler(int irq, void *p) @@ -356,6 +531,13 @@ static void ad7768_regulator_disable(void *data) regulator_disable(st->vref); } +static void ad7768_clk_disable(void *data) +{ + struct ad7768_state *st = data; + + clk_disable_unprepare(st->mclk); +} + static int ad7768_probe(struct spi_device *spi) { struct ad7768_state *st; @@ -383,6 +565,20 @@ static int ad7768_probe(struct spi_device *spi) if (ret) return ret; + st->mclk = devm_clk_get(&spi->dev, "mclk"); + if (IS_ERR(st->mclk)) + return PTR_ERR(st->mclk); + + ret = clk_prepare_enable(st->mclk); + if (ret < 0) + return ret; + + ret = devm_add_action_or_reset(&spi->dev, ad7768_clk_disable, st); + if (ret) + return ret; + + st->mclk_freq = clk_get_rate(st->mclk); + spi_set_drvdata(spi, indio_dev); mutex_init(&st->lock); diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index fa2d2b5767f3..1ca2c4d39f87 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -115,6 +115,7 @@ #define MAX_ADC_V2_CHANNELS 10 #define MAX_ADC_V1_CHANNELS 8 #define MAX_EXYNOS3250_ADC_CHANNELS 2 +#define MAX_EXYNOS4212_ADC_CHANNELS 4 #define MAX_S5PV210_ADC_CHANNELS 10 /* Bit definitions common for ADC_V1 and ADC_V2 */ @@ -271,6 +272,19 @@ static void exynos_adc_v1_start_conv(struct exynos_adc *info, writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); } +/* Exynos4212 and 4412 is like ADCv1 but with four channels only */ +static const struct exynos_adc_data exynos4212_adc_data = { + .num_channels = MAX_EXYNOS4212_ADC_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + .needs_adc_phy = true, + .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .clear_irq = exynos_adc_v1_clear_irq, + .start_conv = exynos_adc_v1_start_conv, +}; + static const struct exynos_adc_data exynos_adc_v1_data = { .num_channels = MAX_ADC_V1_CHANNELS, .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ @@ -493,6 +507,9 @@ static const struct of_device_id exynos_adc_match[] = { .compatible = "samsung,s5pv210-adc", .data = &exynos_adc_s5pv210_data, }, { + .compatible = "samsung,exynos4212-adc", + .data = &exynos4212_adc_data, + }, { .compatible = "samsung,exynos-adc-v1", .data = &exynos_adc_v1_data, }, { @@ -929,7 +946,7 @@ static int exynos_adc_remove(struct platform_device *pdev) struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct exynos_adc *info = iio_priv(indio_dev); - if (IS_REACHABLE(CONFIG_INPUT)) { + if (IS_REACHABLE(CONFIG_INPUT) && info->input) { free_irq(info->tsirq, info); input_unregister_device(info->input); } diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c new file mode 100644 index 000000000000..6ee1673deb0d --- /dev/null +++ b/drivers/iio/adc/ingenic-adc.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ADC driver for the Ingenic JZ47xx SoCs + * Copyright (c) 2019 Artur Rojek <contact@artur-rojek.eu> + * + * based on drivers/mfd/jz4740-adc.c + */ + +#include <dt-bindings/iio/adc/ingenic,adc.h> +#include <linux/clk.h> +#include <linux/iio/iio.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> + +#define JZ_ADC_REG_ENABLE 0x00 +#define JZ_ADC_REG_CFG 0x04 +#define JZ_ADC_REG_CTRL 0x08 +#define JZ_ADC_REG_STATUS 0x0c +#define JZ_ADC_REG_ADTCH 0x18 +#define JZ_ADC_REG_ADBDAT 0x1c +#define JZ_ADC_REG_ADSDAT 0x20 + +#define JZ_ADC_REG_CFG_BAT_MD BIT(4) + +#define JZ_ADC_AUX_VREF 3300 +#define JZ_ADC_AUX_VREF_BITS 12 +#define JZ_ADC_BATTERY_LOW_VREF 2500 +#define JZ_ADC_BATTERY_LOW_VREF_BITS 12 +#define JZ4725B_ADC_BATTERY_HIGH_VREF 7500 +#define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS 10 +#define JZ4740_ADC_BATTERY_HIGH_VREF (7500 * 0.986) +#define JZ4740_ADC_BATTERY_HIGH_VREF_BITS 12 + +struct ingenic_adc_soc_data { + unsigned int battery_high_vref; + unsigned int battery_high_vref_bits; + const int *battery_raw_avail; + size_t battery_raw_avail_size; + const int *battery_scale_avail; + size_t battery_scale_avail_size; +}; + +struct ingenic_adc { + void __iomem *base; + struct clk *clk; + struct mutex lock; + const struct ingenic_adc_soc_data *soc_data; + bool low_vref_mode; +}; + +static void ingenic_adc_set_config(struct ingenic_adc *adc, + uint32_t mask, + uint32_t val) +{ + uint32_t cfg; + + clk_enable(adc->clk); + mutex_lock(&adc->lock); + + cfg = readl(adc->base + JZ_ADC_REG_CFG) & ~mask; + cfg |= val; + writel(cfg, adc->base + JZ_ADC_REG_CFG); + + mutex_unlock(&adc->lock); + clk_disable(adc->clk); +} + +static void ingenic_adc_enable(struct ingenic_adc *adc, + int engine, + bool enabled) +{ + u8 val; + + mutex_lock(&adc->lock); + val = readb(adc->base + JZ_ADC_REG_ENABLE); + + if (enabled) + val |= BIT(engine); + else + val &= ~BIT(engine); + + writeb(val, adc->base + JZ_ADC_REG_ENABLE); + mutex_unlock(&adc->lock); +} + +static int ingenic_adc_capture(struct ingenic_adc *adc, + int engine) +{ + u8 val; + int ret; + + ingenic_adc_enable(adc, engine, true); + ret = readb_poll_timeout(adc->base + JZ_ADC_REG_ENABLE, val, + !(val & BIT(engine)), 250, 1000); + if (ret) + ingenic_adc_enable(adc, engine, false); + + return ret; +} + +static int ingenic_adc_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long m) +{ + struct ingenic_adc *adc = iio_priv(iio_dev); + + switch (m) { + case IIO_CHAN_INFO_SCALE: + switch (chan->channel) { + case INGENIC_ADC_BATTERY: + if (val > JZ_ADC_BATTERY_LOW_VREF) { + ingenic_adc_set_config(adc, + JZ_ADC_REG_CFG_BAT_MD, + 0); + adc->low_vref_mode = false; + } else { + ingenic_adc_set_config(adc, + JZ_ADC_REG_CFG_BAT_MD, + JZ_ADC_REG_CFG_BAT_MD); + adc->low_vref_mode = true; + } + return 0; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static const int jz4725b_adc_battery_raw_avail[] = { + 0, 1, (1 << JZ_ADC_BATTERY_LOW_VREF_BITS) - 1, +}; + +static const int jz4725b_adc_battery_scale_avail[] = { + JZ4725B_ADC_BATTERY_HIGH_VREF, JZ4725B_ADC_BATTERY_HIGH_VREF_BITS, + JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS, +}; + +static const int jz4740_adc_battery_raw_avail[] = { + 0, 1, (1 << JZ_ADC_BATTERY_LOW_VREF_BITS) - 1, +}; + +static const int jz4740_adc_battery_scale_avail[] = { + JZ4740_ADC_BATTERY_HIGH_VREF, JZ4740_ADC_BATTERY_HIGH_VREF_BITS, + JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS, +}; + +static const struct ingenic_adc_soc_data jz4725b_adc_soc_data = { + .battery_high_vref = JZ4725B_ADC_BATTERY_HIGH_VREF, + .battery_high_vref_bits = JZ4725B_ADC_BATTERY_HIGH_VREF_BITS, + .battery_raw_avail = jz4725b_adc_battery_raw_avail, + .battery_raw_avail_size = ARRAY_SIZE(jz4725b_adc_battery_raw_avail), + .battery_scale_avail = jz4725b_adc_battery_scale_avail, + .battery_scale_avail_size = ARRAY_SIZE(jz4725b_adc_battery_scale_avail), +}; + +static const struct ingenic_adc_soc_data jz4740_adc_soc_data = { + .battery_high_vref = JZ4740_ADC_BATTERY_HIGH_VREF, + .battery_high_vref_bits = JZ4740_ADC_BATTERY_HIGH_VREF_BITS, + .battery_raw_avail = jz4740_adc_battery_raw_avail, + .battery_raw_avail_size = ARRAY_SIZE(jz4740_adc_battery_raw_avail), + .battery_scale_avail = jz4740_adc_battery_scale_avail, + .battery_scale_avail_size = ARRAY_SIZE(jz4740_adc_battery_scale_avail), +}; + +static int ingenic_adc_read_avail(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + const int **vals, + int *type, + int *length, + long m) +{ + struct ingenic_adc *adc = iio_priv(iio_dev); + + switch (m) { + case IIO_CHAN_INFO_RAW: + *type = IIO_VAL_INT; + *length = adc->soc_data->battery_raw_avail_size; + *vals = adc->soc_data->battery_raw_avail; + return IIO_AVAIL_RANGE; + case IIO_CHAN_INFO_SCALE: + *type = IIO_VAL_FRACTIONAL_LOG2; + *length = adc->soc_data->battery_scale_avail_size; + *vals = adc->soc_data->battery_scale_avail; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + }; +} + +static int ingenic_adc_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + struct ingenic_adc *adc = iio_priv(iio_dev); + int ret; + + switch (m) { + case IIO_CHAN_INFO_RAW: + clk_enable(adc->clk); + ret = ingenic_adc_capture(adc, chan->channel); + if (ret) { + clk_disable(adc->clk); + return ret; + } + + switch (chan->channel) { + case INGENIC_ADC_AUX: + *val = readw(adc->base + JZ_ADC_REG_ADSDAT); + break; + case INGENIC_ADC_BATTERY: + *val = readw(adc->base + JZ_ADC_REG_ADBDAT); + break; + } + + clk_disable(adc->clk); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + switch (chan->channel) { + case INGENIC_ADC_AUX: + *val = JZ_ADC_AUX_VREF; + *val2 = JZ_ADC_AUX_VREF_BITS; + break; + case INGENIC_ADC_BATTERY: + if (adc->low_vref_mode) { + *val = JZ_ADC_BATTERY_LOW_VREF; + *val2 = JZ_ADC_BATTERY_LOW_VREF_BITS; + } else { + *val = adc->soc_data->battery_high_vref; + *val2 = adc->soc_data->battery_high_vref_bits; + } + break; + } + + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } +} + +static void ingenic_adc_clk_cleanup(void *data) +{ + clk_unprepare(data); +} + +static const struct iio_info ingenic_adc_info = { + .write_raw = ingenic_adc_write_raw, + .read_raw = ingenic_adc_read_raw, + .read_avail = ingenic_adc_read_avail, +}; + +static const struct iio_chan_spec ingenic_channels[] = { + { + .extend_name = "aux", + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .indexed = 1, + .channel = INGENIC_ADC_AUX, + }, + { + .extend_name = "battery", + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .indexed = 1, + .channel = INGENIC_ADC_BATTERY, + }, +}; + +static int ingenic_adc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct iio_dev *iio_dev; + struct ingenic_adc *adc; + struct resource *mem_base; + const struct ingenic_adc_soc_data *soc_data; + int ret; + + soc_data = device_get_match_data(dev); + if (!soc_data) + return -EINVAL; + + iio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); + if (!iio_dev) + return -ENOMEM; + + adc = iio_priv(iio_dev); + mutex_init(&adc->lock); + adc->soc_data = soc_data; + + mem_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + adc->base = devm_ioremap_resource(dev, mem_base); + if (IS_ERR(adc->base)) { + dev_err(dev, "Unable to ioremap mmio resource\n"); + return PTR_ERR(adc->base); + } + + adc->clk = devm_clk_get(dev, "adc"); + if (IS_ERR(adc->clk)) { + dev_err(dev, "Unable to get clock\n"); + return PTR_ERR(adc->clk); + } + + ret = clk_prepare_enable(adc->clk); + if (ret) { + dev_err(dev, "Failed to enable clock\n"); + return ret; + } + + /* Put hardware in a known passive state. */ + writeb(0x00, adc->base + JZ_ADC_REG_ENABLE); + writeb(0xff, adc->base + JZ_ADC_REG_CTRL); + clk_disable(adc->clk); + + ret = devm_add_action_or_reset(dev, ingenic_adc_clk_cleanup, adc->clk); + if (ret) { + dev_err(dev, "Unable to add action\n"); + return ret; + } + + iio_dev->dev.parent = dev; + iio_dev->name = "jz-adc"; + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->channels = ingenic_channels; + iio_dev->num_channels = ARRAY_SIZE(ingenic_channels); + iio_dev->info = &ingenic_adc_info; + + ret = devm_iio_device_register(dev, iio_dev); + if (ret) + dev_err(dev, "Unable to register IIO device\n"); + + return ret; +} + +#ifdef CONFIG_OF +static const struct of_device_id ingenic_adc_of_match[] = { + { .compatible = "ingenic,jz4725b-adc", .data = &jz4725b_adc_soc_data, }, + { .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, }, + { }, +}; +MODULE_DEVICE_TABLE(of, ingenic_adc_of_match); +#endif + +static struct platform_driver ingenic_adc_driver = { + .driver = { + .name = "ingenic-adc", + .of_match_table = of_match_ptr(ingenic_adc_of_match), + }, + .probe = ingenic_adc_probe, +}; +module_platform_driver(ingenic_adc_driver); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/lpc32xx_adc.c b/drivers/iio/adc/lpc32xx_adc.c index 20b36690fa4f..e361c1532a75 100644 --- a/drivers/iio/adc/lpc32xx_adc.c +++ b/drivers/iio/adc/lpc32xx_adc.c @@ -1,23 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * lpc32xx_adc.c - Support for ADC in LPC32XX * * 3-channel, 10-bit ADC * * Copyright (C) 2011, 2012 Roland Stigge <stigge@antcom.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/module.h> diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c index c2cf58908fc8..53f17e4f2f23 100644 --- a/drivers/iio/adc/ti-ads124s08.c +++ b/drivers/iio/adc/ti-ads124s08.c @@ -232,7 +232,7 @@ static int ads124s_read_raw(struct iio_dev *indio_dev, ret = ads124s_write_cmd(indio_dev, ADS124S08_START_CONV); if (ret) { - dev_err(&priv->spi->dev, "Start converions failed\n"); + dev_err(&priv->spi->dev, "Start conversions failed\n"); goto out; } @@ -246,7 +246,7 @@ static int ads124s_read_raw(struct iio_dev *indio_dev, ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV); if (ret) { - dev_err(&priv->spi->dev, "Stop converions failed\n"); + dev_err(&priv->spi->dev, "Stop conversions failed\n"); goto out; } @@ -283,12 +283,12 @@ static irqreturn_t ads124s_trigger_handler(int irq, void *p) ret = ads124s_write_cmd(indio_dev, ADS124S08_START_CONV); if (ret) - dev_err(&priv->spi->dev, "Start ADC converions failed\n"); + dev_err(&priv->spi->dev, "Start ADC conversions failed\n"); buffer[j] = ads124s_read(indio_dev, scan_index); ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV); if (ret) - dev_err(&priv->spi->dev, "Stop ADC converions failed\n"); + dev_err(&priv->spi->dev, "Stop ADC conversions failed\n"); j++; } diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index 57832b4360e9..d5d146e9e372 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -61,6 +61,16 @@ config IAQCORE iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) sensors +config PMS7003 + tristate "Plantower PMS7003 particulate matter sensor" + depends on SERIAL_DEV_BUS + help + Say Y here to build support for the Plantower PMS7003 particulate + matter sensor. + + To compile this driver as a module, choose M here: the module will + be called pms7003. + config SPS30 tristate "SPS30 particulate matter sensor" depends on I2C diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile index 65bf0f89c0e4..f5d1365acb49 100644 --- a/drivers/iio/chemical/Makefile +++ b/drivers/iio/chemical/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o obj-$(CONFIG_BME680_SPI) += bme680_spi.o obj-$(CONFIG_CCS811) += ccs811.o obj-$(CONFIG_IAQCORE) += ams-iaq-core.o +obj-$(CONFIG_PMS7003) += pms7003.o obj-$(CONFIG_SENSIRION_SGP30) += sgp30.o obj-$(CONFIG_SPS30) += sps30.o obj-$(CONFIG_VZ89X) += vz89x.o diff --git a/drivers/iio/chemical/pms7003.c b/drivers/iio/chemical/pms7003.c new file mode 100644 index 000000000000..db8e7b2327b3 --- /dev/null +++ b/drivers/iio/chemical/pms7003.c @@ -0,0 +1,340 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Plantower PMS7003 particulate matter sensor driver + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + */ + +#include <asm/unaligned.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/serdev.h> + +#define PMS7003_DRIVER_NAME "pms7003" + +#define PMS7003_MAGIC 0x424d +/* last 2 data bytes hold frame checksum */ +#define PMS7003_MAX_DATA_LENGTH 28 +#define PMS7003_CHECKSUM_LENGTH 2 +#define PMS7003_PM10_OFFSET 10 +#define PMS7003_PM2P5_OFFSET 8 +#define PMS7003_PM1_OFFSET 6 + +#define PMS7003_TIMEOUT msecs_to_jiffies(6000) +#define PMS7003_CMD_LENGTH 7 +#define PMS7003_PM_MAX 1000 +#define PMS7003_PM_MIN 0 + +enum { + PM1, + PM2P5, + PM10, +}; + +enum pms7003_cmd { + CMD_WAKEUP, + CMD_ENTER_PASSIVE_MODE, + CMD_READ_PASSIVE, + CMD_SLEEP, +}; + +/* + * commands have following format: + * + * +------+------+-----+------+-----+-----------+-----------+ + * | 0x42 | 0x4d | cmd | 0x00 | arg | cksum msb | cksum lsb | + * +------+------+-----+------+-----+-----------+-----------+ + */ +static const u8 pms7003_cmd_tbl[][PMS7003_CMD_LENGTH] = { + [CMD_WAKEUP] = { 0x42, 0x4d, 0xe4, 0x00, 0x01, 0x01, 0x74 }, + [CMD_ENTER_PASSIVE_MODE] = { 0x42, 0x4d, 0xe1, 0x00, 0x00, 0x01, 0x70 }, + [CMD_READ_PASSIVE] = { 0x42, 0x4d, 0xe2, 0x00, 0x00, 0x01, 0x71 }, + [CMD_SLEEP] = { 0x42, 0x4d, 0xe4, 0x00, 0x00, 0x01, 0x73 }, +}; + +struct pms7003_frame { + u8 data[PMS7003_MAX_DATA_LENGTH]; + u16 expected_length; + u16 length; +}; + +struct pms7003_state { + struct serdev_device *serdev; + struct pms7003_frame frame; + struct completion frame_ready; + struct mutex lock; /* must be held whenever state gets touched */ +}; + +static int pms7003_do_cmd(struct pms7003_state *state, enum pms7003_cmd cmd) +{ + int ret; + + ret = serdev_device_write(state->serdev, pms7003_cmd_tbl[cmd], + PMS7003_CMD_LENGTH, PMS7003_TIMEOUT); + if (ret < PMS7003_CMD_LENGTH) + return ret < 0 ? ret : -EIO; + + ret = wait_for_completion_interruptible_timeout(&state->frame_ready, + PMS7003_TIMEOUT); + if (!ret) + ret = -ETIMEDOUT; + + return ret < 0 ? ret : 0; +} + +static u16 pms7003_get_pm(const u8 *data) +{ + return clamp_val(get_unaligned_be16(data), + PMS7003_PM_MIN, PMS7003_PM_MAX); +} + +static irqreturn_t pms7003_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + u16 data[3 + 1 + 4]; /* PM1, PM2P5, PM10, padding, timestamp */ + int ret; + + mutex_lock(&state->lock); + ret = pms7003_do_cmd(state, CMD_READ_PASSIVE); + if (ret) { + mutex_unlock(&state->lock); + goto err; + } + + data[PM1] = pms7003_get_pm(frame->data + PMS7003_PM1_OFFSET); + data[PM2P5] = pms7003_get_pm(frame->data + PMS7003_PM2P5_OFFSET); + data[PM10] = pms7003_get_pm(frame->data + PMS7003_PM10_OFFSET); + mutex_unlock(&state->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, data, + iio_get_time_ns(indio_dev)); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int pms7003_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_MASSCONCENTRATION: + mutex_lock(&state->lock); + ret = pms7003_do_cmd(state, CMD_READ_PASSIVE); + if (ret) { + mutex_unlock(&state->lock); + return ret; + } + + *val = pms7003_get_pm(frame->data + chan->address); + mutex_unlock(&state->lock); + + return IIO_VAL_INT; + default: + return -EINVAL; + } + } + + return -EINVAL; +} + +static const struct iio_info pms7003_info = { + .read_raw = pms7003_read_raw, +}; + +#define PMS7003_CHAN(_index, _mod, _addr) { \ + .type = IIO_MASSCONCENTRATION, \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## _mod, \ + .address = _addr, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 10, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec pms7003_channels[] = { + PMS7003_CHAN(0, PM1, PMS7003_PM1_OFFSET), + PMS7003_CHAN(1, PM2P5, PMS7003_PM2P5_OFFSET), + PMS7003_CHAN(2, PM10, PMS7003_PM10_OFFSET), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static u16 pms7003_calc_checksum(struct pms7003_frame *frame) +{ + u16 checksum = (PMS7003_MAGIC >> 8) + (u8)(PMS7003_MAGIC & 0xff) + + (frame->length >> 8) + (u8)frame->length; + int i; + + for (i = 0; i < frame->length - PMS7003_CHECKSUM_LENGTH; i++) + checksum += frame->data[i]; + + return checksum; +} + +static bool pms7003_frame_is_okay(struct pms7003_frame *frame) +{ + int offset = frame->length - PMS7003_CHECKSUM_LENGTH; + u16 checksum = get_unaligned_be16(frame->data + offset); + + return checksum == pms7003_calc_checksum(frame); +} + +static int pms7003_receive_buf(struct serdev_device *serdev, + const unsigned char *buf, size_t size) +{ + struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev); + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + int num; + + if (!frame->expected_length) { + u16 magic; + + /* wait for SOF and data length */ + if (size < 4) + return 0; + + magic = get_unaligned_be16(buf); + if (magic != PMS7003_MAGIC) + return 2; + + num = get_unaligned_be16(buf + 2); + if (num <= PMS7003_MAX_DATA_LENGTH) { + frame->expected_length = num; + frame->length = 0; + } + + return 4; + } + + num = min(size, (size_t)(frame->expected_length - frame->length)); + memcpy(frame->data + frame->length, buf, num); + frame->length += num; + + if (frame->length == frame->expected_length) { + if (pms7003_frame_is_okay(frame)) + complete(&state->frame_ready); + + frame->expected_length = 0; + } + + return num; +} + +static const struct serdev_device_ops pms7003_serdev_ops = { + .receive_buf = pms7003_receive_buf, + .write_wakeup = serdev_device_write_wakeup, +}; + +static void pms7003_stop(void *data) +{ + struct pms7003_state *state = data; + + pms7003_do_cmd(state, CMD_SLEEP); +} + +static const unsigned long pms7003_scan_masks[] = { 0x07, 0x00 }; + +static int pms7003_probe(struct serdev_device *serdev) +{ + struct pms7003_state *state; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&serdev->dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + state = iio_priv(indio_dev); + serdev_device_set_drvdata(serdev, indio_dev); + state->serdev = serdev; + indio_dev->dev.parent = &serdev->dev; + indio_dev->info = &pms7003_info; + indio_dev->name = PMS7003_DRIVER_NAME; + indio_dev->channels = pms7003_channels, + indio_dev->num_channels = ARRAY_SIZE(pms7003_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = pms7003_scan_masks; + + mutex_init(&state->lock); + init_completion(&state->frame_ready); + + serdev_device_set_client_ops(serdev, &pms7003_serdev_ops); + ret = devm_serdev_device_open(&serdev->dev, serdev); + if (ret) + return ret; + + serdev_device_set_baudrate(serdev, 9600); + serdev_device_set_flow_control(serdev, false); + + ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); + if (ret) + return ret; + + ret = pms7003_do_cmd(state, CMD_WAKEUP); + if (ret) { + dev_err(&serdev->dev, "failed to wakeup sensor\n"); + return ret; + } + + ret = pms7003_do_cmd(state, CMD_ENTER_PASSIVE_MODE); + if (ret) { + dev_err(&serdev->dev, "failed to enter passive mode\n"); + return ret; + } + + ret = devm_add_action_or_reset(&serdev->dev, pms7003_stop, state); + if (ret) + return ret; + + ret = devm_iio_triggered_buffer_setup(&serdev->dev, indio_dev, NULL, + pms7003_trigger_handler, NULL); + if (ret) + return ret; + + return devm_iio_device_register(&serdev->dev, indio_dev); +} + +static const struct of_device_id pms7003_of_match[] = { + { .compatible = "plantower,pms7003" }, + { } +}; +MODULE_DEVICE_TABLE(of, pms7003_of_match); + +static struct serdev_device_driver pms7003_driver = { + .driver = { + .name = PMS7003_DRIVER_NAME, + .of_match_table = pms7003_of_match, + }, + .probe = pms7003_probe, +}; +module_serdev_device_driver(pms7003_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("Plantower PMS7003 particulate matter sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c index e03a28a67146..edbb956e81e8 100644 --- a/drivers/iio/chemical/sps30.c +++ b/drivers/iio/chemical/sps30.c @@ -118,6 +118,7 @@ static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size) case SPS30_READ_AUTO_CLEANING_PERIOD: buf[0] = SPS30_AUTO_CLEANING_PERIOD >> 8; buf[1] = (u8)SPS30_AUTO_CLEANING_PERIOD; + /* fall through */ case SPS30_READ_DATA_READY_FLAG: case SPS30_READ_DATA: case SPS30_READ_SERIAL: @@ -210,7 +211,7 @@ static int sps30_do_meas(struct sps30_state *state, s32 *data, int size) msleep_interruptible(300); } - if (!tries) + if (tries == -1) return -ETIMEDOUT; ret = sps30_do_cmd(state, SPS30_READ_DATA, tmp, sizeof(int) * size); @@ -295,6 +296,8 @@ static int sps30_read_raw(struct iio_dev *indio_dev, *val2 = 10000; return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; } default: return -EINVAL; diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index f28daf67db6a..fbef9107acad 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -375,6 +375,16 @@ config TI_DAC7311 If compiled as a module, it will be called ti-dac7311. +config TI_DAC7612 + tristate "Texas Instruments 12-bit 2-channel DAC driver" + depends on SPI_MASTER && GPIOLIB + help + Driver for the Texas Instruments DAC7612, DAC7612U, DAC7612UB + The driver hand drive the load pin automatically, otherwise + it needs to be toggled manually. + + If compiled as a module, it will be called ti-dac7612. + config VF610_DAC tristate "Vybrid vf610 DAC driver" depends on OF diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index f0a37c93de8e..1369fa1d2f0e 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -41,4 +41,5 @@ obj-$(CONFIG_STM32_DAC) += stm32-dac.o obj-$(CONFIG_TI_DAC082S085) += ti-dac082s085.o obj-$(CONFIG_TI_DAC5571) += ti-dac5571.o obj-$(CONFIG_TI_DAC7311) += ti-dac7311.o +obj-$(CONFIG_TI_DAC7612) += ti-dac7612.o obj-$(CONFIG_VF610_DAC) += vf610_dac.o diff --git a/drivers/iio/dac/ad5686-spi.c b/drivers/iio/dac/ad5686-spi.c index 4d857c8da2d2..0188ded5137c 100644 --- a/drivers/iio/dac/ad5686-spi.c +++ b/drivers/iio/dac/ad5686-spi.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0 /* * AD5672R, AD5674R, AD5676, AD5676R, AD5679R, * AD5681R, AD5682R, AD5683, AD5683R, AD5684, diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c index 6dd2759b9092..e06b29c565b9 100644 --- a/drivers/iio/dac/ad5686.c +++ b/drivers/iio/dac/ad5686.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0 /* * AD5686R, AD5685R, AD5684R Digital to analog converters driver * diff --git a/drivers/iio/dac/ad5686.h b/drivers/iio/dac/ad5686.h index 4c3e171ce0cc..70a779939ddb 100644 --- a/drivers/iio/dac/ad5686.h +++ b/drivers/iio/dac/ad5686.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: GPL-2.0 */ /* * This file is part of AD5686 DAC driver * diff --git a/drivers/iio/dac/ad5696-i2c.c b/drivers/iio/dac/ad5696-i2c.c index 7350d9806a11..ccf794caef43 100644 --- a/drivers/iio/dac/ad5696-i2c.c +++ b/drivers/iio/dac/ad5696-i2c.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0 /* * AD5671R, AD5675R, AD5691R, AD5692R, AD5693, AD5693R, * AD5694, AD5694R, AD5695R, AD5696, AD5696R diff --git a/drivers/iio/dac/ad5758.c b/drivers/iio/dac/ad5758.c index ef41f12bf262..2bdf1b0aee06 100644 --- a/drivers/iio/dac/ad5758.c +++ b/drivers/iio/dac/ad5758.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0 /* * AD5758 Digital to analog converters driver * diff --git a/drivers/iio/dac/ti-dac7612.c b/drivers/iio/dac/ti-dac7612.c new file mode 100644 index 000000000000..c46805144dd4 --- /dev/null +++ b/drivers/iio/dac/ti-dac7612.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DAC7612 Dual, 12-Bit Serial input Digital-to-Analog Converter + * + * Copyright 2019 Qtechnology A/S + * 2019 Ricardo Ribalda <ricardo@ribalda.com> + * + * Licensed under the GPL-2. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/gpio/consumer.h> +#include <linux/iio/iio.h> + +#define DAC7612_RESOLUTION 12 +#define DAC7612_ADDRESS 4 +#define DAC7612_START 5 + +struct dac7612 { + struct spi_device *spi; + struct gpio_desc *loaddacs; + uint16_t cache[2]; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + uint8_t data[2] ____cacheline_aligned; +}; + +static int dac7612_cmd_single(struct dac7612 *priv, int channel, u16 val) +{ + int ret; + + priv->data[0] = BIT(DAC7612_START) | (channel << DAC7612_ADDRESS); + priv->data[0] |= val >> 8; + priv->data[1] = val & 0xff; + + priv->cache[channel] = val; + + ret = spi_write(priv->spi, priv->data, sizeof(priv->data)); + if (ret) + return ret; + + gpiod_set_value(priv->loaddacs, 1); + gpiod_set_value(priv->loaddacs, 0); + + return 0; +} + +#define dac7612_CHANNEL(chan, name) { \ + .type = IIO_VOLTAGE, \ + .channel = (chan), \ + .indexed = 1, \ + .output = 1, \ + .datasheet_name = name, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec dac7612_channels[] = { + dac7612_CHANNEL(0, "OUTA"), + dac7612_CHANNEL(1, "OUTB"), +}; + +static int dac7612_read_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct dac7612 *priv; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + priv = iio_priv(iio_dev); + *val = priv->cache[chan->channel]; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 1; + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int dac7612_write_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long mask) +{ + struct dac7612 *priv = iio_priv(iio_dev); + int ret; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + if ((val >= BIT(DAC7612_RESOLUTION)) || val < 0 || val2) + return -EINVAL; + + if (val == priv->cache[chan->channel]) + return 0; + + mutex_lock(&iio_dev->mlock); + ret = dac7612_cmd_single(priv, chan->channel, val); + mutex_unlock(&iio_dev->mlock); + + return ret; +} + +static const struct iio_info dac7612_info = { + .read_raw = dac7612_read_raw, + .write_raw = dac7612_write_raw, +}; + +static int dac7612_probe(struct spi_device *spi) +{ + struct iio_dev *iio_dev; + struct dac7612 *priv; + int i; + int ret; + + iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*priv)); + if (!iio_dev) + return -ENOMEM; + + priv = iio_priv(iio_dev); + /* + * LOADDACS pin can be controlled by the driver or externally. + * When controlled by the driver, the DAC value is updated after + * every write. + * When the driver does not control the PIN, the user or an external + * event can change the value of all DACs by pulsing down the LOADDACs + * pin. + */ + priv->loaddacs = devm_gpiod_get_optional(&spi->dev, "ti,loaddacs", + GPIOD_OUT_LOW); + if (IS_ERR(priv->loaddacs)) + return PTR_ERR(priv->loaddacs); + priv->spi = spi; + spi_set_drvdata(spi, iio_dev); + iio_dev->dev.parent = &spi->dev; + iio_dev->info = &dac7612_info; + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->channels = dac7612_channels; + iio_dev->num_channels = ARRAY_SIZE(priv->cache); + iio_dev->name = spi_get_device_id(spi)->name; + + for (i = 0; i < ARRAY_SIZE(priv->cache); i++) { + ret = dac7612_cmd_single(priv, i, 0); + if (ret) + return ret; + } + + return devm_iio_device_register(&spi->dev, iio_dev); +} + +static const struct spi_device_id dac7612_id[] = { + {"ti-dac7612"}, + {} +}; +MODULE_DEVICE_TABLE(spi, dac7612_id); + +static const struct of_device_id dac7612_of_match[] = { + { .compatible = "ti,dac7612" }, + { .compatible = "ti,dac7612u" }, + { .compatible = "ti,dac7612ub" }, + { }, +}; +MODULE_DEVICE_TABLE(of, dac7612_of_match); + +static struct spi_driver dac7612_driver = { + .driver = { + .name = "ti-dac7612", + .of_match_table = dac7612_of_match, + }, + .probe = dac7612_probe, + .id_table = dac7612_id, +}; +module_spi_driver(dac7612_driver); + +MODULE_AUTHOR("Ricardo Ribalda <ricardo@ribalda.com>"); +MODULE_DESCRIPTION("Texas Instruments DAC7612 DAC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h index 2351049d930b..621f5309d735 100644 --- a/drivers/iio/imu/bmi160/bmi160.h +++ b/drivers/iio/imu/bmi160/bmi160.h @@ -2,9 +2,20 @@ #ifndef BMI160_H_ #define BMI160_H_ +#include <linux/iio/iio.h> + +struct bmi160_data { + struct regmap *regmap; + struct iio_trigger *trig; +}; + extern const struct regmap_config bmi160_regmap_config; int bmi160_core_probe(struct device *dev, struct regmap *regmap, const char *name, bool use_spi); +int bmi160_enable_irq(struct regmap *regmap, bool enable); + +int bmi160_probe_trigger(struct iio_dev *indio_dev, int irq, u32 irq_type); + #endif /* BMI160_H_ */ diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c index b10330b0f93f..6af65d6f1d28 100644 --- a/drivers/iio/imu/bmi160/bmi160_core.c +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -1,26 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 /* * BMI160 - Bosch IMU (accel, gyro plus external magnetometer) * * Copyright (c) 2016, Intel Corporation. - * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. + * Copyright (c) 2019, Martin Kelly. * * IIO core driver for BMI160, with support for I2C/SPI busses * - * TODO: magnetometer, interrupts, hardware FIFO + * TODO: magnetometer, hardware FIFO */ #include <linux/module.h> #include <linux/regmap.h> #include <linux/acpi.h> #include <linux/delay.h> +#include <linux/irq.h> +#include <linux/of_irq.h> #include <linux/iio/iio.h> #include <linux/iio/triggered_buffer.h> #include <linux/iio/trigger_consumer.h> #include <linux/iio/buffer.h> #include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> #include "bmi160.h" @@ -64,8 +65,32 @@ #define BMI160_CMD_GYRO_PM_FAST_STARTUP 0x17 #define BMI160_CMD_SOFTRESET 0xB6 +#define BMI160_REG_INT_EN 0x51 +#define BMI160_DRDY_INT_EN BIT(4) + +#define BMI160_REG_INT_OUT_CTRL 0x53 +#define BMI160_INT_OUT_CTRL_MASK 0x0f +#define BMI160_INT1_OUT_CTRL_SHIFT 0 +#define BMI160_INT2_OUT_CTRL_SHIFT 4 +#define BMI160_EDGE_TRIGGERED BIT(0) +#define BMI160_ACTIVE_HIGH BIT(1) +#define BMI160_OPEN_DRAIN BIT(2) +#define BMI160_OUTPUT_EN BIT(3) + +#define BMI160_REG_INT_LATCH 0x54 +#define BMI160_INT1_LATCH_MASK BIT(4) +#define BMI160_INT2_LATCH_MASK BIT(5) + +/* INT1 and INT2 are in the opposite order as in INT_OUT_CTRL! */ +#define BMI160_REG_INT_MAP 0x56 +#define BMI160_INT1_MAP_DRDY_EN 0x80 +#define BMI160_INT2_MAP_DRDY_EN 0x08 + #define BMI160_REG_DUMMY 0x7F +#define BMI160_NORMAL_WRITE_USLEEP 2 +#define BMI160_SUSPENDED_WRITE_USLEEP 450 + #define BMI160_ACCEL_PMU_MIN_USLEEP 3800 #define BMI160_GYRO_PMU_MIN_USLEEP 80000 #define BMI160_SOFTRESET_USLEEP 1000 @@ -108,8 +133,9 @@ enum bmi160_sensor_type { BMI160_NUM_SENSORS /* must be last */ }; -struct bmi160_data { - struct regmap *regmap; +enum bmi160_int_pin { + BMI160_PIN_INT1, + BMI160_PIN_INT2 }; const struct regmap_config bmi160_regmap_config = { @@ -273,7 +299,7 @@ int bmi160_set_mode(struct bmi160_data *data, enum bmi160_sensor_type t, cmd = bmi160_regs[t].pmu_cmd_suspend; ret = regmap_write(data->regmap, BMI160_REG_CMD, cmd); - if (ret < 0) + if (ret) return ret; usleep_range(bmi160_pmu_time[t], bmi160_pmu_time[t] + 1000); @@ -305,7 +331,7 @@ int bmi160_get_scale(struct bmi160_data *data, enum bmi160_sensor_type t, int i, ret, val; ret = regmap_read(data->regmap, bmi160_regs[t].range, &val); - if (ret < 0) + if (ret) return ret; for (i = 0; i < bmi160_scale_table[t].num; i++) @@ -328,7 +354,7 @@ static int bmi160_get_data(struct bmi160_data *data, int chan_type, reg = bmi160_regs[t].data + (axis - IIO_MOD_X) * sizeof(sample); ret = regmap_bulk_read(data->regmap, reg, &sample, sizeof(sample)); - if (ret < 0) + if (ret) return ret; *val = sign_extend32(le16_to_cpu(sample), 15); @@ -362,7 +388,7 @@ static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t, int i, val, ret; ret = regmap_read(data->regmap, bmi160_regs[t].config, &val); - if (ret < 0) + if (ret) return ret; val &= bmi160_regs[t].config_odr_mask; @@ -394,13 +420,12 @@ static irqreturn_t bmi160_trigger_handler(int irq, void *p) indio_dev->masklength) { ret = regmap_bulk_read(data->regmap, base + i * sizeof(sample), &sample, sizeof(sample)); - if (ret < 0) + if (ret) goto done; buf[j++] = sample; } - iio_push_to_buffers_with_timestamp(indio_dev, buf, - iio_get_time_ns(indio_dev)); + iio_push_to_buffers_with_timestamp(indio_dev, buf, pf->timestamp); done: iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; @@ -416,18 +441,18 @@ static int bmi160_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: ret = bmi160_get_data(data, chan->type, chan->channel2, val); - if (ret < 0) + if (ret) return ret; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = 0; ret = bmi160_get_scale(data, bmi160_to_sensor(chan->type), val2); - return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO; + return ret ? ret : IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SAMP_FREQ: ret = bmi160_get_odr(data, bmi160_to_sensor(chan->type), val, val2); - return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO; + return ret ? ret : IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } @@ -498,6 +523,186 @@ static const char *bmi160_match_acpi_device(struct device *dev) return dev_name(dev); } +static int bmi160_write_conf_reg(struct regmap *regmap, unsigned int reg, + unsigned int mask, unsigned int bits, + unsigned int write_usleep) +{ + int ret; + unsigned int val; + + ret = regmap_read(regmap, reg, &val); + if (ret) + return ret; + + val = (val & ~mask) | bits; + + ret = regmap_write(regmap, reg, val); + if (ret) + return ret; + + /* + * We need to wait after writing before we can write again. See the + * datasheet, page 93. + */ + usleep_range(write_usleep, write_usleep + 1000); + + return 0; +} + +static int bmi160_config_pin(struct regmap *regmap, enum bmi160_int_pin pin, + bool open_drain, u8 irq_mask, + unsigned long write_usleep) +{ + int ret; + struct device *dev = regmap_get_device(regmap); + u8 int_out_ctrl_shift; + u8 int_latch_mask; + u8 int_map_mask; + u8 int_out_ctrl_mask; + u8 int_out_ctrl_bits; + const char *pin_name; + + switch (pin) { + case BMI160_PIN_INT1: + int_out_ctrl_shift = BMI160_INT1_OUT_CTRL_SHIFT; + int_latch_mask = BMI160_INT1_LATCH_MASK; + int_map_mask = BMI160_INT1_MAP_DRDY_EN; + break; + case BMI160_PIN_INT2: + int_out_ctrl_shift = BMI160_INT2_OUT_CTRL_SHIFT; + int_latch_mask = BMI160_INT2_LATCH_MASK; + int_map_mask = BMI160_INT2_MAP_DRDY_EN; + break; + } + int_out_ctrl_mask = BMI160_INT_OUT_CTRL_MASK << int_out_ctrl_shift; + + /* + * Enable the requested pin with the right settings: + * - Push-pull/open-drain + * - Active low/high + * - Edge/level triggered + */ + int_out_ctrl_bits = BMI160_OUTPUT_EN; + if (open_drain) + /* Default is push-pull. */ + int_out_ctrl_bits |= BMI160_OPEN_DRAIN; + int_out_ctrl_bits |= irq_mask; + int_out_ctrl_bits <<= int_out_ctrl_shift; + + ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_OUT_CTRL, + int_out_ctrl_mask, int_out_ctrl_bits, + write_usleep); + if (ret) + return ret; + + /* Set the pin to input mode with no latching. */ + ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_LATCH, + int_latch_mask, int_latch_mask, + write_usleep); + if (ret) + return ret; + + /* Map interrupts to the requested pin. */ + ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_MAP, + int_map_mask, int_map_mask, + write_usleep); + if (ret) { + switch (pin) { + case BMI160_PIN_INT1: + pin_name = "INT1"; + break; + case BMI160_PIN_INT2: + pin_name = "INT2"; + break; + } + dev_err(dev, "Failed to configure %s IRQ pin", pin_name); + } + + return ret; +} + +int bmi160_enable_irq(struct regmap *regmap, bool enable) +{ + unsigned int enable_bit = 0; + + if (enable) + enable_bit = BMI160_DRDY_INT_EN; + + return bmi160_write_conf_reg(regmap, BMI160_REG_INT_EN, + BMI160_DRDY_INT_EN, enable_bit, + BMI160_NORMAL_WRITE_USLEEP); +} +EXPORT_SYMBOL(bmi160_enable_irq); + +static int bmi160_get_irq(struct device_node *of_node, enum bmi160_int_pin *pin) +{ + int irq; + + /* Use INT1 if possible, otherwise fall back to INT2. */ + irq = of_irq_get_byname(of_node, "INT1"); + if (irq > 0) { + *pin = BMI160_PIN_INT1; + return irq; + } + + irq = of_irq_get_byname(of_node, "INT2"); + if (irq > 0) + *pin = BMI160_PIN_INT2; + + return irq; +} + +static int bmi160_config_device_irq(struct iio_dev *indio_dev, int irq_type, + enum bmi160_int_pin pin) +{ + bool open_drain; + u8 irq_mask; + struct bmi160_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); + + /* Level-triggered, active-low is the default if we set all zeroes. */ + if (irq_type == IRQF_TRIGGER_RISING) + irq_mask = BMI160_ACTIVE_HIGH | BMI160_EDGE_TRIGGERED; + else if (irq_type == IRQF_TRIGGER_FALLING) + irq_mask = BMI160_EDGE_TRIGGERED; + else if (irq_type == IRQF_TRIGGER_HIGH) + irq_mask = BMI160_ACTIVE_HIGH; + else if (irq_type == IRQF_TRIGGER_LOW) + irq_mask = 0; + else { + dev_err(&indio_dev->dev, + "Invalid interrupt type 0x%x specified\n", irq_type); + return -EINVAL; + } + + open_drain = of_property_read_bool(dev->of_node, "drive-open-drain"); + + return bmi160_config_pin(data->regmap, pin, open_drain, irq_mask, + BMI160_NORMAL_WRITE_USLEEP); +} + +static int bmi160_setup_irq(struct iio_dev *indio_dev, int irq, + enum bmi160_int_pin pin) +{ + struct irq_data *desc; + u32 irq_type; + int ret; + + desc = irq_get_irq_data(irq); + if (!desc) { + dev_err(&indio_dev->dev, "Could not find IRQ %d\n", irq); + return -EINVAL; + } + + irq_type = irqd_get_trigger_type(desc); + + ret = bmi160_config_device_irq(indio_dev, irq_type, pin); + if (ret) + return ret; + + return bmi160_probe_trigger(indio_dev, irq, irq_type); +} + static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) { int ret; @@ -505,7 +710,7 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) struct device *dev = regmap_get_device(data->regmap); ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET); - if (ret < 0) + if (ret) return ret; usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1); @@ -516,12 +721,12 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) */ if (use_spi) { ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val); - if (ret < 0) + if (ret) return ret; } ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val); - if (ret < 0) { + if (ret) { dev_err(dev, "Error reading chip id\n"); return ret; } @@ -532,16 +737,59 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) } ret = bmi160_set_mode(data, BMI160_ACCEL, true); - if (ret < 0) + if (ret) return ret; ret = bmi160_set_mode(data, BMI160_GYRO, true); - if (ret < 0) + if (ret) return ret; return 0; } +static int bmi160_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool enable) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct bmi160_data *data = iio_priv(indio_dev); + + return bmi160_enable_irq(data->regmap, enable); +} + +static const struct iio_trigger_ops bmi160_trigger_ops = { + .set_trigger_state = &bmi160_data_rdy_trigger_set_state, +}; + +int bmi160_probe_trigger(struct iio_dev *indio_dev, int irq, u32 irq_type) +{ + struct bmi160_data *data = iio_priv(indio_dev); + int ret; + + data->trig = devm_iio_trigger_alloc(&indio_dev->dev, "%s-dev%d", + indio_dev->name, indio_dev->id); + + if (data->trig == NULL) + return -ENOMEM; + + ret = devm_request_irq(&indio_dev->dev, irq, + &iio_trigger_generic_data_rdy_poll, + irq_type, "bmi160", data->trig); + if (ret) + return ret; + + data->trig->dev.parent = regmap_get_device(data->regmap); + data->trig->ops = &bmi160_trigger_ops; + iio_trigger_set_drvdata(data->trig, indio_dev); + + ret = devm_iio_trigger_register(&indio_dev->dev, data->trig); + if (ret) + return ret; + + indio_dev->trig = iio_trigger_get(data->trig); + + return 0; +} + static void bmi160_chip_uninit(void *data) { struct bmi160_data *bmi_data = data; @@ -555,6 +803,8 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap, { struct iio_dev *indio_dev; struct bmi160_data *data; + int irq; + enum bmi160_int_pin int_pin; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); @@ -566,11 +816,11 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap, data->regmap = regmap; ret = bmi160_chip_init(data, use_spi); - if (ret < 0) + if (ret) return ret; ret = devm_add_action_or_reset(dev, bmi160_chip_uninit, data); - if (ret < 0) + if (ret) return ret; if (!name && ACPI_HANDLE(dev)) @@ -583,16 +833,23 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap, indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &bmi160_info; - ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, + iio_pollfunc_store_time, bmi160_trigger_handler, NULL); - if (ret < 0) + if (ret) return ret; - ret = devm_iio_device_register(dev, indio_dev); - if (ret < 0) - return ret; + irq = bmi160_get_irq(dev->of_node, &int_pin); + if (irq > 0) { + ret = bmi160_setup_irq(indio_dev, irq, int_pin); + if (ret) + dev_err(&indio_dev->dev, "Failed to setup IRQ %d\n", + irq); + } else { + dev_info(&indio_dev->dev, "Not setting up IRQ trigger\n"); + } - return 0; + return devm_iio_device_register(dev, indio_dev); } EXPORT_SYMBOL_GPL(bmi160_core_probe); diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c index 5b1f7e6af651..e36f5e82d400 100644 --- a/drivers/iio/imu/bmi160/bmi160_i2c.c +++ b/drivers/iio/imu/bmi160/bmi160_i2c.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * BMI160 - Bosch IMU, I2C bits * * Copyright (c) 2016, Intel Corporation. * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. - * * 7-bit I2C slave address is: * - 0x68 if SDO is pulled to GND * - 0x69 if SDO is pulled to VDDIO diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c index e521ad14eeac..c19e3df35559 100644 --- a/drivers/iio/imu/bmi160/bmi160_spi.c +++ b/drivers/iio/imu/bmi160/bmi160_spi.c @@ -1,11 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * BMI160 - Bosch IMU, SPI bits * * Copyright (c) 2016, Intel Corporation. * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. */ #include <linux/acpi.h> #include <linux/module.h> diff --git a/include/dt-bindings/iio/adc/ingenic,adc.h b/include/dt-bindings/iio/adc/ingenic,adc.h new file mode 100644 index 000000000000..82706b2706ac --- /dev/null +++ b/include/dt-bindings/iio/adc/ingenic,adc.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _DT_BINDINGS_IIO_ADC_INGENIC_ADC_H +#define _DT_BINDINGS_IIO_ADC_INGENIC_ADC_H + +/* ADC channel idx. */ +#define INGENIC_ADC_AUX 0 +#define INGENIC_ADC_BATTERY 1 + +#endif |