Merge tag 'qcom-arm64-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 Updates for v5.5

* Add thermal IRQ support on MSM8916, SDM845, MSM8996, and QCS404
* Fix thermal HW ids for cpus on MSM8916
* Add blsp1 UART3 and  blsp1 BAM on MSM8998
* Add volume buttons and WCNSS for Wifi and BT on MSM8916 LongCheer-l8150
* Fixup load on l21 for SD on apq8096-db820c
* Enable LVS1/2, APSS watchdog, and select UFS reset gpio for SDM845
* Disable coresight by default on MSM8998
* Enable bluetooth and remove retention idle state on MSM8998-clamshell
* Enable adsp, cdsp, and mpss on C630
* Enable bluetooth on MSM8998-mtp
* Delete zap shader on SDM845-cheza
* Add tactile buttons and hall sensor on MSM8916-Samsung-A2015
* Add Interconnect nodes, watchdog, and sleep clk on QCS404
* Override Iris compatible on MSM8916-Samsung-A5U
* Enable WCNSS Wifi and bluetooth on MSM8916-Samsung-A2015
* Fixup cooling states for the aoss warming devices

* tag 'qcom-arm64-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (26 commits)
  arm64: dts: qcom: db845c: Enable LVS 1 and 2
  arm64: dts: qcom: msm8998: Disable coresight by default
  arm64: dts: qcom: msm8998-clamshell: Remove retention idle state
  arm64: dts: qcom: sdm845-cheza: delete zap-shader
  arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
  arm64: dts: sdm845: thermal: Add interrupt support
  arm64: dts: msm8996: thermal: Add interrupt support
  arm64: dts: msm8998: thermal: Add interrupt support
  arm64: dts: qcs404: thermal: Add interrupt support
  arm64: dts: qcom: sdm845: Add APSS watchdog node
  arm64: dts: qcom: c630: Enable adsp, cdsp and mpss
  arm64: dts: qcom: msm8998-clamshell: Enable bluetooth
  arm64: dts: qcom: msm8998-mtp: Enable bluetooth
  arm64: dts: qcom: msm8998: Add blsp1_uart3
  arm64: dts: qcom: msm8998: Add blsp1 BAM
  arm64: dts: msm8916-longcheer-l8150: Add Volume buttons
  arm64: dts: msm8916-longcheer-l8150: Enable WCNSS for WiFi and BT
  soc: qcom: Invert the cooling states for the aoss warming devices
  arm64: dts: apq8096-db820c: Increase load on l21 for SDCARD
  arm64: dts: msm8916-samsung-a2015: add tactile buttons and hall sensor
  ...

Link: https://lore.kernel.org/r/1573068840-13098-2-git-send-email-agross@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>

16 files changed, 449 insertions, 75 deletions

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 04ad2fb22b9a..dba3488492f1 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -623,6 +623,8 @@
 				l21 {
 					regulator-min-microvolt = <2950000>;
 					regulator-max-microvolt = <2950000>;
+					regulator-allow-set-load;
+					regulator-system-load = <200000>;
 				};
 				l22 {
 					regulator-min-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 2b28e383fd0b..d1ccb9472c8b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -5,6 +5,7 @@
 #include "msm8916.dtsi"
 #include "pm8916.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Longcheer L8150";
@@ -18,6 +19,16 @@
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		// wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000
+		/delete-node/ wcnss@89300000;
+
+		wcnss_mem: wcnss@8b600000 {
+			reg = <0x0 0x8b600000 0x0 0x600000>;
+			no-map;
+		};
+	};
+
 	soc {
 		sdhci@7824000 {
 			status = "okay";
@@ -68,6 +79,10 @@
 			};
 		};
 
+		wcnss@a21b000 {
+			status = "okay";
+		};
+
 		/*
 		 * Attempting to enable these devices causes a "synchronous
 		 * external abort". Suspected cause is that the debug power
@@ -99,9 +114,36 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb_vbus_default>;
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
 };
 
 &msmgpio {
+	gpio_keys_default: gpio_keys_default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio107";
+		};
+		pinconf {
+			pins = "gpio107";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	usb_vbus_default: usb-vbus-default {
 		pinmux {
 			function = "gpio";
@@ -114,6 +156,19 @@
 	};
 };
 
+&spmi_bus {
+	pm8916@0 {
+		pon@800 {
+			volume-down {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				bias-pull-up;
+				linux,code = <KEY_VOLUMEDOWN>;
+			};
+		};
+	};
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index e675ff48fdd2..bd1eb3eeca53 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -3,6 +3,7 @@
 #include "msm8916.dtsi"
 #include "pm8916.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -63,6 +64,10 @@
 			};
 		};
 
+		wcnss@a21b000 {
+			status = "okay";
+		};
+
 		/*
 		 * Attempting to enable these devices causes a "synchronous
 		 * external abort". Suspected cause is that the debug power
@@ -87,6 +92,44 @@
 		etm@85f000 { status = "disabled"; };
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+
+		label = "GPIO Hall Effect Sensor";
+
+		hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
 	i2c-muic {
 		compatible = "i2c-gpio";
 		sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -109,6 +152,30 @@
 };
 
 &msmgpio {
+	gpio_keys_default: gpio_keys_default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio107", "gpio109";
+		};
+		pinconf {
+			pins = "gpio107", "gpio109";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	gpio_hall_sensor_default: gpio_hall_sensor_default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio52";
+		};
+		pinconf {
+			pins = "gpio52";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	muic_int_default: muic_int_default {
 		pinmux {
 			function = "gpio";
@@ -234,3 +301,16 @@
 		regulator-max-microvolt = <2700000>;
 	};
 };
+
+&spmi_bus {
+	pm8916@0 {
+		pon@800 {
+			volume-down {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				bias-pull-up;
+				linux,code = <KEY_VOLUMEDOWN>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index 1aa59da98495..6629a621139c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -8,3 +8,9 @@
 	model = "Samsung Galaxy A5U (EUR)";
 	compatible = "samsung,a5u-eur", "qcom,msm8916";
 };
+
+&pronto {
+	iris {
+		compatible = "qcom,wcn3680";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5ea9fb8f2f87..8686e101905c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -179,7 +179,7 @@
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&tsens 4>;
+			thermal-sensors = <&tsens 5>;
 
 			trips {
 				cpu0_1_alert0: trip-point@0 {
@@ -209,7 +209,7 @@
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&tsens 3>;
+			thermal-sensors = <&tsens 4>;
 
 			trips {
 				cpu2_3_alert0: trip-point@0 {
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 87f4d9c1b0d4..4ca2e7b44559 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -591,6 +591,8 @@
 			reg = <0x4a9000 0x1000>, /* TM */
 			      <0x4a8000 0x1000>; /* SROT */
 			#qcom,sensors = <13>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -599,6 +601,8 @@
 			reg = <0x4ad000 0x1000>, /* TM */
 			      <0x4ac000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 9682d4dd7496..6138b58db6d2 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -23,6 +23,57 @@
 	};
 };
 
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+/*
+ * The laptop FW does not appear to support the retention state as it is
+ * not advertised as enabled in ACPI, and enabling it in DT can cause boot
+ * hangs.
+ */
+&CPU0 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU1 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU2 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU3 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU4 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU5 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU6 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU7 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
 &qusb2phy {
 	status = "okay";
 
@@ -104,6 +155,7 @@
 		vreg_l7a_1p8: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
 		};
 		vreg_l8a_1p2: l8 {
 			regulator-min-microvolt = <1200000>;
@@ -144,6 +196,7 @@
 		vreg_l17a_1p3: l17 {
 			regulator-min-microvolt = <1304000>;
 			regulator-max-microvolt = <1304000>;
+			regulator-allow-set-load;
 		};
 		vreg_l18a_2p7: l18 {
 			regulator-min-microvolt = <2704000>;
@@ -179,6 +232,7 @@
 		vreg_l25a_3p3: l25 {
 			regulator-min-microvolt = <3104000>;
 			regulator-max-microvolt = <3312000>;
+			regulator-allow-set-load;
 		};
 		vreg_l26a_1p2: l26 {
 			regulator-min-microvolt = <1200000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 108667ce4f31..5f101a20a20a 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -23,10 +23,84 @@
 	};
 };
 
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
 &blsp2_uart1 {
 	status = "okay";
 };
 
+&etf {
+	status = "okay";
+};
+
+&etm1 {
+	status = "okay";
+};
+
+&etm2 {
+	status = "okay";
+};
+
+&etm3 {
+	status = "okay";
+};
+
+&etm4 {
+	status = "okay";
+};
+
+&etm5 {
+	status = "okay";
+};
+
+&etm6 {
+	status = "okay";
+};
+
+&etm7 {
+	status = "okay";
+};
+
+&etm8 {
+	status = "okay";
+};
+
+&etr {
+	status = "okay";
+};
+
+&funnel1 {
+	status = "okay";
+};
+
+&funnel2 {
+	status = "okay";
+};
+
+&funnel3 {
+	status = "okay";
+};
+
+&funnel4 {
+	status = "okay";
+};
+
+&funnel5 {
+	status = "okay";
+};
+
 &pm8005_lsid1 {
 	pm8005-regulators {
 		compatible = "qcom,pm8005-regulators";
@@ -51,6 +125,10 @@
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
 
+&replicator1 {
+	status = "okay";
+};
+
 &rpm_requests {
 	pm8998-regulators {
 		compatible = "qcom,rpm-pm8998-regulators";
@@ -249,6 +327,10 @@
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 };
 
+&stm {
+	status = "okay";
+};
+
 &ufshc {
 	vcc-supply = <&vreg_l20a_2p95>;
 	vccq-supply = <&vreg_l26a_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
index 6db70acd38ee..e32d3ab395ea 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
@@ -75,4 +75,17 @@
 			drive-strength = <2>;   /* 2 mA */
 		};
 	};
+
+	blsp1_uart3_on: blsp1_uart3_on {
+		mux {
+			pins = "gpio45", "gpio46", "gpio47", "gpio48";
+			function = "blsp_uart3_a";
+		};
+
+		config {
+			pins = "gpio45", "gpio46", "gpio47", "gpio48";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c6f81431983e..fc7838ea9a01 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -816,8 +816,9 @@
 			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
 			reg = <0x010ab000 0x1000>, /* TM */
 			      <0x010aa000 0x1000>; /* SROT */
-
 			#qcom,sensors = <14>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -825,8 +826,9 @@
 			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
 			reg = <0x010ae000 0x1000>, /* TM */
 			      <0x010ad000 0x1000>; /* SROT */
-
 			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -998,11 +1000,12 @@
 			#interrupt-cells = <0x2>;
 		};
 
-		stm@6002000 {
+		stm: stm@6002000 {
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0x06002000 0x1000>,
 			      <0x16280000 0x180000>;
 			reg-names = "stm-base", "stm-data-base";
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1016,9 +1019,10 @@
 			};
 		};
 
-		funnel@6041000 {
+		funnel1: funnel@6041000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x06041000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1045,9 +1049,10 @@
 			};
 		};
 
-		funnel@6042000 {
+		funnel2: funnel@6042000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x06042000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1075,9 +1080,10 @@
 			};
 		};
 
-		funnel@6045000 {
+		funnel3: funnel@6045000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x06045000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1113,9 +1119,10 @@
 			};
 		};
 
-		replicator@6046000 {
+		replicator1: replicator@6046000 {
 			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
 			reg = <0x06046000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1137,9 +1144,10 @@
 			};
 		};
 
-		etf@6047000 {
+		etf: etf@6047000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
 			reg = <0x06047000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1163,9 +1171,10 @@
 			};
 		};
 
-		etr@6048000 {
+		etr: etr@6048000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
 			reg = <0x06048000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1181,9 +1190,10 @@
 			};
 		};
 
-		etm@7840000 {
+		etm1: etm@7840000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07840000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1200,9 +1210,10 @@
 			};
 		};
 
-		etm@7940000 {
+		etm2: etm@7940000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07940000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1219,9 +1230,10 @@
 			};
 		};
 
-		etm@7a40000 {
+		etm3: etm@7a40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07a40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1238,9 +1250,10 @@
 			};
 		};
 
-		etm@7b40000 {
+		etm4: etm@7b40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07b40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1257,9 +1270,10 @@
 			};
 		};
 
-		funnel@7b60000 { /* APSS Funnel */
+		funnel4: funnel@7b60000 { /* APSS Funnel */
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07b60000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1343,9 +1357,10 @@
 			};
 		};
 
-		funnel@7b70000 {
+		funnel5: funnel@7b70000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x07b70000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1369,9 +1384,10 @@
 			};
 		};
 
-		etm@7c40000 {
+		etm5: etm@7c40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07c40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1385,9 +1401,10 @@
 			};
 		};
 
-		etm@7d40000 {
+		etm6: etm@7d40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07d40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1401,9 +1418,10 @@
 			};
 		};
 
-		etm@7e40000 {
+		etm7: etm@7e40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07e40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1417,9 +1435,10 @@
 			};
 		};
 
-		etm@7f40000 {
+		etm8: etm@7f40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07f40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1556,6 +1575,33 @@
 			status = "disabled";
 		};
 
+		blsp1_dma: dma@c144000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c144000 0x25000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp1_uart3: serial@c171000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c171000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart3_on>;
+			status = "disabled";
+		};
+
 		blsp1_i2c1: i2c@c175000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x0c175000 0x600>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index a97eeb4569c0..f5f0c4c9cb16 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -22,6 +22,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	cpus {
@@ -283,6 +289,15 @@
 			clock-names = "core";
 		};
 
+		bimc: interconnect@400000 {
+			reg = <0x00400000 0x80000>;
+			compatible = "qcom,qcs404-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				<&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
 		tsens: thermal-sensor@4a9000 {
 			compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
 			reg = <0x004a9000 0x1000>, /* TM */
@@ -290,9 +305,29 @@
 			nvmem-cells = <&tsens_caldata>;
 			nvmem-cell-names = "calib";
 			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
+		pcnoc: interconnect@500000 {
+			reg = <0x00500000 0x15080>;
+			compatible = "qcom,qcs404-pcnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+				<&rpmcc RPM_SMD_PNOC_A_CLK>;
+		};
+
+		snoc: interconnect@580000 {
+			reg = <0x00580000 0x23080>;
+			compatible = "qcom,qcs404-snoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				<&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
 		remoteproc_cdsp: remoteproc@b00000 {
 			compatible = "qcom,qcs404-cdsp-pas";
 			reg = <0x00b00000 0x4040>;
@@ -869,6 +904,12 @@
 			#mbox-cells = <1>;
 		};
 
+		watchdog@b017000 {
+			compatible = "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
 		timer@b120000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 34881c0113cb..9a4ff57fc877 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -165,6 +165,8 @@
 /delete-node/ &venus_mem;
 /delete-node/ &cdsp_mem;
 /delete-node/ &cdsp_pas;
+/delete-node/ &zap_shader;
+/delete-node/ &gpu_mem;
 
 /* Increase the size from 120 MB to 128 MB */
 &mpss_region {
@@ -701,9 +703,8 @@ ap_ts_i2c: &i2c14 {
 
 &ufs_mem_hc {
 	status = "okay";
-	pinctrl-names = "init", "default";
-	pinctrl-0 = <&ufs_dev_reset_assert>;
-	pinctrl-1 = <&ufs_dev_reset_deassert>;
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 
 	vcc-supply = <&src_pp2950_l20a>;
 	vcc-max-microamp = <600000>;
@@ -1258,52 +1259,6 @@ ap_ts_i2c: &i2c14 {
 		};
 	};
 
-	ufs_dev_reset_assert: ufs_dev_reset_assert {
-		config {
-			pins = "ufs_reset";
-			bias-pull-down;		/* default: pull down */
-			/*
-			 * UFS_RESET driver strengths are having
-			 * different values/steps compared to typical
-			 * GPIO drive strengths.
-			 *
-			 * Following table clarifies:
-			 *
-			 * HDRV value | UFS_RESET | Typical GPIO
-			 *   (dec)    |   (mA)    |    (mA)
-			 *     0      |   0.8     |    2
-			 *     1      |   1.55    |    4
-			 *     2      |   2.35    |    6
-			 *     3      |   3.1     |    8
-			 *     4      |   3.9     |    10
-			 *     5      |   4.65    |    12
-			 *     6      |   5.4     |    14
-			 *     7      |   6.15    |    16
-			 *
-			 * POR value for UFS_RESET HDRV is 3 which means
-			 * 3.1mA and we want to use that. Hence just
-			 * specify 8mA to "drive-strength" binding and
-			 * that should result into writing 3 to HDRV
-			 * field.
-			 */
-			drive-strength = <8>;	/* default: 3.1 mA */
-			output-low; /* active low reset */
-		};
-	};
-
-	ufs_dev_reset_deassert: ufs_dev_reset_deassert {
-		config {
-			pins = "ufs_reset";
-			bias-pull-down;		/* default: pull down */
-			/*
-			 * default: 3.1 mA
-			 * check comments under ufs_dev_reset_assert
-			 */
-			drive-strength = <8>;
-			output-high; /* active low reset */
-		};
-	};
-
 	ap_suspend_l_assert: ap_suspend_l_assert {
 		config {
 			pins = "gpio126";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index f5a85caff1a3..d100f46791a6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -312,6 +312,18 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
 	};
 
 	pmi8998-rpmh-regulators {
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index f406a4340b05..ddb1f23c936f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2824,7 +2824,7 @@
 
 			qcom,gmu = <&gmu>;
 
-			zap-shader {
+			zap_shader: zap-shader {
 				memory-region = <&gpu_mem>;
 			};
 
@@ -2950,6 +2950,8 @@
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 			      <0 0x0c222000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <13>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -2958,6 +2960,8 @@
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 			      <0 0x0c223000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -3084,6 +3088,12 @@
 			status = "disabled";
 		};
 
+		watchdog@17980000 {
+			compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
+			reg = <0 0x17980000 0 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
 		apss_shared: mailbox@17990000 {
 			compatible = "qcom,sdm845-apss-shared";
 			reg = <0 0x17990000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index ded120d3aef5..13dc619687f3 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -20,6 +20,11 @@
 	};
 };
 
+&adsp_pas {
+	firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn";
+	status = "okay";
+};
+
 &apps_rsc {
 	pm8998-rpmh-regulators {
 		compatible = "qcom,pm8998-rpmh-regulators";
@@ -229,6 +234,11 @@
 	status = "disabled";
 };
 
+&cdsp_pas {
+	firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn";
+	status = "okay";
+};
+
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -296,6 +306,10 @@
 	};
 };
 
+&mss_pil {
+	firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn";
+};
+
 &qup_i2c12_default {
 	drive-strength = <2>;
 	bias-disable;
diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 33a27e6c6d67..006ac40c526a 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -44,7 +44,7 @@
 
 #define QMP_NUM_COOLING_RESOURCES	2
 
-static bool qmp_cdev_init_state = 1;
+static bool qmp_cdev_max_state = 1;
 
 struct qmp_cooling_device {
 	struct thermal_cooling_device *cdev;
@@ -402,7 +402,7 @@ static void qmp_pd_remove(struct qmp *qmp)
 static int qmp_cdev_get_max_state(struct thermal_cooling_device *cdev,
 				  unsigned long *state)
 {
-	*state = qmp_cdev_init_state;
+	*state = qmp_cdev_max_state;
 	return 0;
 }
 
@@ -432,7 +432,7 @@ static int qmp_cdev_set_cur_state(struct thermal_cooling_device *cdev,
 	snprintf(buf, sizeof(buf),
 		 "{class: volt_flr, event:zero_temp, res:%s, value:%s}",
 			qmp_cdev->name,
-			cdev_state ? "off" : "on");
+			cdev_state ? "on" : "off");
 
 	ret = qmp_send(qmp_cdev->qmp, buf, sizeof(buf));
 
@@ -455,7 +455,7 @@ static int qmp_cooling_device_add(struct qmp *qmp,
 	char *cdev_name = (char *)node->name;
 
 	qmp_cdev->qmp = qmp;
-	qmp_cdev->state = qmp_cdev_init_state;
+	qmp_cdev->state = !qmp_cdev_max_state;
 	qmp_cdev->name = cdev_name;
 	qmp_cdev->cdev = devm_thermal_of_cooling_device_register
 				(qmp->dev, node,