diff options
| author | Phil Sutter <phil.sutter@viprinet.com> | 2013-03-06 07:49:02 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2013-03-07 16:17:45 -0500 |
| commit | 260055bb1f1f8b5328601816c50fd7e0dfda7dff (patch) | |
| tree | e0e9a4b5eed0928c04a9a63654f976af85cb4c5c | |
| parent | 80028ea1c0afc24d4ddeb8dd2a9992fff03616ca (diff) | |
| download | linux-260055bb1f1f8b5328601816c50fd7e0dfda7dff.tar.bz2 | |
mv643xx_eth: fix for disabled autoneg
When autoneg has been disabled in the PHY (Marvell 88E1118 here), auto
negotiation between MAC and PHY seem non-functional anymore. The only
way I found to workaround this is to manually configure the MAC with the
settings sent to the PHY earlier.
Signed-off-by: Phil Sutter <phil.sutter@viprinet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | drivers/net/ethernet/marvell/mv643xx_eth.c | 55 |
1 files changed, 51 insertions, 4 deletions
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 29140502b71a..6562c736a1d8 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -1081,6 +1081,45 @@ static void txq_set_fixed_prio_mode(struct tx_queue *txq) /* mii management interface *************************************************/ +static void mv643xx_adjust_pscr(struct mv643xx_eth_private *mp) +{ + u32 pscr = rdlp(mp, PORT_SERIAL_CONTROL); + u32 autoneg_disable = FORCE_LINK_PASS | + DISABLE_AUTO_NEG_SPEED_GMII | + DISABLE_AUTO_NEG_FOR_FLOW_CTRL | + DISABLE_AUTO_NEG_FOR_DUPLEX; + + if (mp->phy->autoneg == AUTONEG_ENABLE) { + /* enable auto negotiation */ + pscr &= ~autoneg_disable; + goto out_write; + } + + pscr |= autoneg_disable; + + if (mp->phy->speed == SPEED_1000) { + /* force gigabit, half duplex not supported */ + pscr |= SET_GMII_SPEED_TO_1000; + pscr |= SET_FULL_DUPLEX_MODE; + goto out_write; + } + + pscr &= ~SET_GMII_SPEED_TO_1000; + + if (mp->phy->speed == SPEED_100) + pscr |= SET_MII_SPEED_TO_100; + else + pscr &= ~SET_MII_SPEED_TO_100; + + if (mp->phy->duplex == DUPLEX_FULL) + pscr |= SET_FULL_DUPLEX_MODE; + else + pscr &= ~SET_FULL_DUPLEX_MODE; + +out_write: + wrlp(mp, PORT_SERIAL_CONTROL, pscr); +} + static irqreturn_t mv643xx_eth_err_irq(int irq, void *dev_id) { struct mv643xx_eth_shared_private *msp = dev_id; @@ -1499,6 +1538,7 @@ static int mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct mv643xx_eth_private *mp = netdev_priv(dev); + int ret; if (mp->phy == NULL) return -EINVAL; @@ -1508,7 +1548,10 @@ mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) */ cmd->advertising &= ~ADVERTISED_1000baseT_Half; - return phy_ethtool_sset(mp->phy, cmd); + ret = phy_ethtool_sset(mp->phy, cmd); + if (!ret) + mv643xx_adjust_pscr(mp); + return ret; } static void mv643xx_eth_get_drvinfo(struct net_device *dev, @@ -2442,11 +2485,15 @@ static int mv643xx_eth_stop(struct net_device *dev) static int mv643xx_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct mv643xx_eth_private *mp = netdev_priv(dev); + int ret; - if (mp->phy != NULL) - return phy_mii_ioctl(mp->phy, ifr, cmd); + if (mp->phy == NULL) + return -ENOTSUPP; - return -EOPNOTSUPP; + ret = phy_mii_ioctl(mp->phy, ifr, cmd); + if (!ret) + mv643xx_adjust_pscr(mp); + return ret; } static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu) |