summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-02-23 08:39:40 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-02-23 08:39:40 -0800
commitd5dee39b27201f9f5460eca55efcc91a663b738c (patch)
treeba1b026b0b20439f962ee4621e33adcab1c7fc3a
parent4cc4b9323f43458c9277e082f90316570431881e (diff)
parent6e11617fcff3688f70650a3e40addb0043dda137 (diff)
downloadlinux-d5dee39b27201f9f5460eca55efcc91a663b738c.tar.bz2
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry: - a new driver for Zeitech touchscreen controller - a new driver for Samsung "touchkeys" - touchscreen driver for Moorestown platform has been removed because platform support is gone - MPU3050 accelerometer driver was removed in favor of IIO driver - miscellaneous driver cleanup and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (88 commits) Input: zet6223 - export OF device ID as module aliases Input: tsc2004/5 - switch to using generic device properties Input: tsc2004/5 - fix regulator handling Input: tsc2005 - add OF device table Input: add driver for Zeitec ZET6223 Input: joydev - do not report stale values on first open Input: synaptics-rmi4 - forward upper mechanical buttons to PS/2 guest Input: synaptics-rmi4 - clean up F30 implementation Input: synaptics - use SERIO_OOB_DATA to handle trackstick buttons Input: psmouse - add a custom serio protocol to send extra information Input: synaptics-rmi4 - fix error return code in rmi_probe_interrupts() Input: xpad - restore LED state after device resume Input: synaptics-rmi4 - add rmi_find_function() Input: xpad - fix stuck mode button on Xbox One S pad Input: joydev - use clamp() macro Input: refuse to register absolute devices without absinfo Input: synaptics-rmi4 - add sysfs interfaces for hardware IDs Input: synaptics-rmi4 - add sysfs attribute update_fw_status Input: mousedev - stop offering PS/2 to userspace by default Input: tca8418 - switch to using generic device properties ...
-rw-r--r--Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt27
-rw-r--r--Documentation/devicetree/bindings/input/mpr121-touchkey.txt30
-rw-r--r--Documentation/devicetree/bindings/input/pwm-beeper.txt16
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/zet6223.txt32
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--drivers/input/Kconfig3
-rw-r--r--drivers/input/input.c8
-rw-r--r--drivers/input/joydev.c20
-rw-r--r--drivers/input/joystick/maplecontrol.c1
-rw-r--r--drivers/input/joystick/xpad.c156
-rw-r--r--drivers/input/keyboard/Kconfig11
-rw-r--r--drivers/input/keyboard/Makefile1
-rw-r--r--drivers/input/keyboard/adc-keys.c2
-rw-r--r--drivers/input/keyboard/adp5520-keys.c2
-rw-r--r--drivers/input/keyboard/bcm-keypad.c4
-rw-r--r--drivers/input/keyboard/bf54x-keys.c2
-rw-r--r--drivers/input/keyboard/cap11xx.c1
-rw-r--r--drivers/input/keyboard/cros_ec_keyb.c2
-rw-r--r--drivers/input/keyboard/davinci_keyscan.c4
-rw-r--r--drivers/input/keyboard/gpio_keys.c66
-rw-r--r--drivers/input/keyboard/gpio_keys_polled.c7
-rw-r--r--drivers/input/keyboard/jornada680_kbd.c2
-rw-r--r--drivers/input/keyboard/lpc32xx-keys.c2
-rw-r--r--drivers/input/keyboard/maple_keyb.c1
-rw-r--r--drivers/input/keyboard/matrix_keypad.c2
-rw-r--r--drivers/input/keyboard/max7359_keypad.c1
-rw-r--r--drivers/input/keyboard/mpr121_touchkey.c176
-rw-r--r--drivers/input/keyboard/nspire-keypad.c2
-rw-r--r--drivers/input/keyboard/omap4-keypad.c7
-rw-r--r--drivers/input/keyboard/opencores-kbd.c4
-rw-r--r--drivers/input/keyboard/pmic8xxx-keypad.c2
-rw-r--r--drivers/input/keyboard/pxa27x_keypad.c2
-rw-r--r--drivers/input/keyboard/samsung-keypad.c2
-rw-r--r--drivers/input/keyboard/spear-keyboard.c2
-rw-r--r--drivers/input/keyboard/st-keyscan.c4
-rw-r--r--drivers/input/keyboard/stmpe-keypad.c2
-rw-r--r--drivers/input/keyboard/sun4i-lradc-keys.c1
-rw-r--r--drivers/input/keyboard/tca8418_keypad.c92
-rw-r--r--drivers/input/keyboard/tm2-touchkey.c284
-rw-r--r--drivers/input/keyboard/twl4030_keypad.c5
-rw-r--r--drivers/input/matrix-keymap.c109
-rw-r--r--drivers/input/misc/88pm80x_onkey.c1
-rw-r--r--drivers/input/misc/Kconfig10
-rw-r--r--drivers/input/misc/Makefile1
-rw-r--r--drivers/input/misc/ab8500-ponkey.c1
-rw-r--r--drivers/input/misc/arizona-haptics.c2
-rw-r--r--drivers/input/misc/atmel_captouch.c1
-rw-r--r--drivers/input/misc/bfin_rotary.c11
-rw-r--r--drivers/input/misc/bma150.c4
-rw-r--r--drivers/input/misc/da9063_onkey.c1
-rw-r--r--drivers/input/misc/dm355evm_keys.c2
-rw-r--r--drivers/input/misc/drv260x.c2
-rw-r--r--drivers/input/misc/e3x0-button.c8
-rw-r--r--drivers/input/misc/gp2ap002a00f.c2
-rw-r--r--drivers/input/misc/gpio_decoder.c1
-rw-r--r--drivers/input/misc/gpio_tilt_polled.c2
-rw-r--r--drivers/input/misc/hisi_powerkey.c17
-rw-r--r--drivers/input/misc/mma8450.c2
-rw-r--r--drivers/input/misc/mpu3050.c481
-rw-r--r--drivers/input/misc/pm8941-pwrkey.c1
-rw-r--r--drivers/input/misc/pmic8xxx-pwrkey.c8
-rw-r--r--drivers/input/misc/pwm-beeper.c156
-rw-r--r--drivers/input/misc/retu-pwrbutton.c6
-rw-r--r--drivers/input/misc/sirfsoc-onkey.c8
-rw-r--r--drivers/input/misc/soc_button_array.c8
-rw-r--r--drivers/input/misc/tps65218-pwrbutton.c8
-rw-r--r--drivers/input/misc/twl4030-pwrbutton.c1
-rw-r--r--drivers/input/mouse/alps.c2
-rw-r--r--drivers/input/mouse/bcm5974.c2
-rw-r--r--drivers/input/mouse/cyapa.c6
-rw-r--r--drivers/input/mouse/cyapa_gen3.c29
-rw-r--r--drivers/input/mouse/cypress_ps2.c6
-rw-r--r--drivers/input/mouse/elan_i2c_core.c46
-rw-r--r--drivers/input/mouse/elantech.c2
-rw-r--r--drivers/input/mouse/hgpk.c5
-rw-r--r--drivers/input/mouse/logips2pp.c2
-rw-r--r--drivers/input/mouse/maplemouse.c1
-rw-r--r--drivers/input/mouse/psmouse-base.c41
-rw-r--r--drivers/input/mouse/psmouse.h5
-rw-r--r--drivers/input/mouse/synaptics.c26
-rw-r--r--drivers/input/mouse/synaptics.h1
-rw-r--r--drivers/input/mouse/trackpoint.c4
-rw-r--r--drivers/input/rmi4/Kconfig27
-rw-r--r--drivers/input/rmi4/rmi_2d_sensor.c7
-rw-r--r--drivers/input/rmi4/rmi_bus.c8
-rw-r--r--drivers/input/rmi4/rmi_driver.c21
-rw-r--r--drivers/input/rmi4/rmi_driver.h16
-rw-r--r--drivers/input/rmi4/rmi_f01.c104
-rw-r--r--drivers/input/rmi4/rmi_f03.c41
-rw-r--r--drivers/input/rmi4/rmi_f30.c352
-rw-r--r--drivers/input/rmi4/rmi_f34.c142
-rw-r--r--drivers/input/rmi4/rmi_f34.h4
-rw-r--r--drivers/input/rmi4/rmi_f34v7.c11
-rw-r--r--drivers/input/serio/at32psif.c12
-rw-r--r--drivers/input/serio/hyperv-keyboard.c1
-rw-r--r--drivers/input/serio/i8042-x86ia64io.h8
-rw-r--r--drivers/input/serio/i8042.c6
-rw-r--r--drivers/input/serio/xilinx_ps2.c7
-rw-r--r--drivers/input/touchscreen/88pm860x-ts.c3
-rw-r--r--drivers/input/touchscreen/Kconfig23
-rw-r--r--drivers/input/touchscreen/Makefile2
-rw-r--r--drivers/input/touchscreen/ads7846.c2
-rw-r--r--drivers/input/touchscreen/ar1021_i2c.c1
-rw-r--r--drivers/input/touchscreen/atmel-wm97xx.c4
-rw-r--r--drivers/input/touchscreen/atmel_mxt_ts.c2
-rw-r--r--drivers/input/touchscreen/bu21013_ts.c2
-rw-r--r--drivers/input/touchscreen/colibri-vf50-ts.c2
-rw-r--r--drivers/input/touchscreen/edt-ft5x06.c5
-rw-r--r--drivers/input/touchscreen/eeti_ts.c5
-rw-r--r--drivers/input/touchscreen/egalax_ts.c3
-rw-r--r--drivers/input/touchscreen/elants_i2c.c2
-rw-r--r--drivers/input/touchscreen/fsl-imx25-tcq.c2
-rw-r--r--drivers/input/touchscreen/ili210x.c3
-rw-r--r--drivers/input/touchscreen/intel-mid-touch.c654
-rw-r--r--drivers/input/touchscreen/lpc32xx_ts.c1
-rw-r--r--drivers/input/touchscreen/max11801_ts.c2
-rw-r--r--drivers/input/touchscreen/mcs5000_ts.c1
-rw-r--r--drivers/input/touchscreen/pixcir_i2c_ts.c4
-rw-r--r--drivers/input/touchscreen/raydium_i2c_ts.c2
-rw-r--r--drivers/input/touchscreen/rohm_bu21023.c3
-rw-r--r--drivers/input/touchscreen/s3c2410_ts.c2
-rw-r--r--drivers/input/touchscreen/sis_i2c.c1
-rw-r--r--drivers/input/touchscreen/st1232.c1
-rw-r--r--drivers/input/touchscreen/sx8654.c1
-rw-r--r--drivers/input/touchscreen/tsc2005.c12
-rw-r--r--drivers/input/touchscreen/tsc200x-core.c112
-rw-r--r--drivers/input/touchscreen/zet6223.c268
-rw-r--r--include/linux/i2c/mpr121_touchkey.h20
-rw-r--r--include/linux/input/matrix_keypad.h21
-rw-r--r--include/linux/input/tca8418_keypad.h44
-rw-r--r--include/linux/spi/tsc2005.h34
-rw-r--r--include/uapi/linux/serio.h7
132 files changed, 1843 insertions, 2196 deletions
diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
new file mode 100644
index 000000000000..635f62c756ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
@@ -0,0 +1,27 @@
+Samsung tm2-touchkey
+
+Required properties:
+- compatible: must be "cypress,tm2-touchkey"
+- reg: I2C address of the chip.
+- interrupt-parent: a phandle for the interrupt controller (see interrupt
+ binding[0]).
+- interrupts: interrupt to which the chip is connected (see interrupt
+ binding[0]).
+- vcc-supply : internal regulator output. 1.8V
+- vdd-supply : power supply for IC 3.3V
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Example:
+ &i2c0 {
+ /* ... */
+
+ touchkey@20 {
+ compatible = "cypress,tm2-touchkey";
+ reg = <0x20>;
+ interrupt-parent = <&gpa3>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ vcc-supply=<&ldo32_reg>;
+ vdd-supply=<&ldo33_reg>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/mpr121-touchkey.txt b/Documentation/devicetree/bindings/input/mpr121-touchkey.txt
new file mode 100644
index 000000000000..b7c61ee5841b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mpr121-touchkey.txt
@@ -0,0 +1,30 @@
+* Freescale MPR121 Controllor
+
+Required Properties:
+- compatible: Should be "fsl,mpr121-touchkey"
+- reg: The I2C slave address of the device.
+- interrupts: The interrupt number to the cpu.
+- vdd-supply: Phandle to the Vdd power supply.
+- linux,keycodes: Specifies an array of numeric keycode values to
+ be used for reporting button presses. The array can
+ contain up to 12 entries.
+
+Optional Properties:
+- wakeup-source: Use any event on keypad as wakeup event.
+- autorepeat: Enable autorepeat feature.
+
+Example:
+
+#include "dt-bindings/input/input.h"
+
+ touchkey: mpr121@5a {
+ compatible = "fsl,mpr121-touchkey";
+ reg = <0x5a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 2>;
+ autorepeat;
+ vdd-supply = <&ldo4_reg>;
+ linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
+ <KEY_4> <KEY_5>, <KEY_6>, <KEY_7>,
+ <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
+ };
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
index be332ae4f2d6..529408b4431a 100644
--- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
@@ -5,3 +5,19 @@ Registers a PWM device as beeper.
Required properties:
- compatible: should be "pwm-beeper"
- pwms: phandle to the physical PWM device
+
+Optional properties:
+- amp-supply: phandle to a regulator that acts as an amplifier for the beeper
+
+Example:
+
+beeper_amp: amplifier {
+ compatible = "fixed-regulator";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+beeper {
+ compatible = "pwm-beeper";
+ pwms = <&pwm0>;
+ amp-supply = <&beeper_amp>;
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
new file mode 100644
index 000000000000..fe6a1feef703
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
@@ -0,0 +1,32 @@
+Zeitec ZET6223 I2C touchscreen controller
+
+Required properties:
+- compatible : "zeitec,zet6223"
+- reg : I2C slave address of the chip (0x76)
+- interrupt-parent : a phandle pointing to the interrupt controller
+ serving the interrupt for this chip
+- interrupts : interrupt specification for the zet6223 interrupt
+
+Optional properties:
+
+- vio-supply : Specification for VIO supply (1.8V or 3.3V,
+ depending on system interface needs).
+- vcc-supply : Specification for 3.3V VCC supply.
+- touchscreen-size-x : See touchscreen.txt
+- touchscreen-size-y : See touchscreen.txt
+- touchscreen-inverted-x : See touchscreen.txt
+- touchscreen-inverted-y : See touchscreen.txt
+- touchscreen-swapped-x-y : See touchscreen.txt
+
+Example:
+
+i2c@00000000 {
+
+ zet6223: touchscreen@76 {
+ compatible = "zeitec,zet6223";
+ reg = <0x76>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
+ };
+
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 1d0bb2c9def4..ebd46f2eef24 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -334,6 +334,7 @@ xes Extreme Engineering Solutions (X-ES)
xillybus Xillybus Ltd.
xlnx Xilinx
zarlink Zarlink Semiconductor
+zeitec ZEITEC Semiconductor Co., LTD.
zii Zodiac Inflight Innovations
zte ZTE Corp.
zyxel ZyXEL Communications Corp.
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 6261874c07c9..ff8037798779 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -94,7 +94,6 @@ comment "Userland interfaces"
config INPUT_MOUSEDEV
tristate "Mouse interface"
- default y
help
Say Y here if you want your mouse to be accessible as char devices
13:32+ - /dev/input/mouseX and 13:63 - /dev/input/mice as an
@@ -109,7 +108,6 @@ config INPUT_MOUSEDEV
config INPUT_MOUSEDEV_PSAUX
bool "Provide legacy /dev/psaux device"
- default y
depends on INPUT_MOUSEDEV
help
Say Y here if you want your mouse also be accessible as char device
@@ -118,7 +116,6 @@ config INPUT_MOUSEDEV_PSAUX
If unsure, say Y.
-
config INPUT_MOUSEDEV_SCREEN_X
int "Horizontal screen resolution"
depends on INPUT_MOUSEDEV
diff --git a/drivers/input/input.c b/drivers/input/input.c
index d95c34ee5dc1..067d648028a2 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1749,7 +1749,7 @@ static const struct dev_pm_ops input_dev_pm_ops = {
};
#endif /* CONFIG_PM */
-static struct device_type input_dev_type = {
+static const struct device_type input_dev_type = {
.groups = input_dev_attr_groups,
.release = input_dev_release,
.uevent = input_dev_uevent,
@@ -2091,6 +2091,12 @@ int input_register_device(struct input_dev *dev)
const char *path;
int error;
+ if (test_bit(EV_ABS, dev->evbit) && !dev->absinfo) {
+ dev_err(&dev->dev,
+ "Absolute device without dev->absinfo, refusing to register\n");
+ return -EINVAL;
+ }
+
if (dev->devres_managed) {
devres = devres_alloc(devm_input_device_unregister,
sizeof(struct input_devres), GFP_KERNEL);
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index abd18f31b24f..065e67bf56dd 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -87,7 +87,7 @@ static int joydev_correct(int value, struct js_corr *corr)
return 0;
}
- return value < -32767 ? -32767 : (value > 32767 ? 32767 : value);
+ return clamp(value, -32767, 32767);
}
static void joydev_pass_event(struct joydev_client *client,
@@ -187,6 +187,17 @@ static void joydev_detach_client(struct joydev *joydev,
synchronize_rcu();
}
+static void joydev_refresh_state(struct joydev *joydev)
+{
+ struct input_dev *dev = joydev->handle.dev;
+ int i, val;
+
+ for (i = 0; i < joydev->nabs; i++) {
+ val = input_abs_get_val(dev, joydev->abspam[i]);
+ joydev->abs[i] = joydev_correct(val, &joydev->corr[i]);
+ }
+}
+
static int joydev_open_device(struct joydev *joydev)
{
int retval;
@@ -201,6 +212,8 @@ static int joydev_open_device(struct joydev *joydev)
retval = input_open_device(&joydev->handle);
if (retval)
joydev->open--;
+ else
+ joydev_refresh_state(joydev);
}
mutex_unlock(&joydev->mutex);
@@ -872,7 +885,6 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
j = joydev->abspam[i];
if (input_abs_get_max(dev, j) == input_abs_get_min(dev, j)) {
joydev->corr[i].type = JS_CORR_NONE;
- joydev->abs[i] = input_abs_get_val(dev, j);
continue;
}
joydev->corr[i].type = JS_CORR_BROKEN;
@@ -887,10 +899,6 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
if (t) {
joydev->corr[i].coef[2] = (1 << 29) / t;
joydev->corr[i].coef[3] = (1 << 29) / t;
-
- joydev->abs[i] =
- joydev_correct(input_abs_get_val(dev, j),
- joydev->corr + i);
}
}
diff --git a/drivers/input/joystick/maplecontrol.c b/drivers/input/joystick/maplecontrol.c
index 8aa6e4c497da..ff54e195d42c 100644
--- a/drivers/input/joystick/maplecontrol.c
+++ b/drivers/input/joystick/maplecontrol.c
@@ -139,7 +139,6 @@ static int probe_maple_controller(struct device *dev)
idev->dev.parent = &mdev->dev;
idev->name = mdev->product_name;
idev->id.bustype = BUS_HOST;
- input_set_drvdata(idev, pad);
error = input_register_device(idev);
if (error)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index c7d5b2b643d1..155fcb3b6230 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -320,18 +320,18 @@ static struct usb_device_id xpad_table[] = {
XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f X-Box One controllers */
+ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOXONE_VENDOR(0x0f0d), /* Hori Controllers */
XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
- XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
- XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
- XPAD_XBOXONE_VENDOR(0x0f0d), /* Hori Controllers */
- XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
- XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */
- XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA Controllers */
XPAD_XBOX360_VENDOR(0x1532), /* Razer Sabertooth */
XPAD_XBOX360_VENDOR(0x15e4), /* Numark X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x162e), /* Joytech X-Box 360 controllers */
+ XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
+ XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
+ XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */
+ XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA Controllers */
{ }
};
@@ -389,6 +389,7 @@ struct usb_xpad {
static int xpad_init_input(struct usb_xpad *xpad);
static void xpad_deinit_input(struct usb_xpad *xpad);
+static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num);
/*
* xpad_process_packet
@@ -608,14 +609,36 @@ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned cha
}
/*
- * xpadone_process_buttons
+ * xpadone_process_packet
+ *
+ * Completes a request by converting the data into events for the
+ * input subsystem. This version is for the Xbox One controller.
*
- * Process a button update packet from an Xbox one controller.
+ * The report format was gleaned from
+ * https://github.com/kylelemons/xbox/blob/master/xbox.go
*/
-static void xpadone_process_buttons(struct usb_xpad *xpad,
- struct input_dev *dev,
- unsigned char *data)
+static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
+ struct input_dev *dev = xpad->dev;
+
+ /* the xbox button has its own special report */
+ if (data[0] == 0X07) {
+ /*
+ * The Xbox One S controller requires these reports to be
+ * acked otherwise it continues sending them forever and
+ * won't report further mode button events.
+ */
+ if (data[1] == 0x30)
+ xpadone_ack_mode_report(xpad, data[2]);
+
+ input_report_key(dev, BTN_MODE, data[4] & 0x01);
+ input_sync(dev);
+ return;
+ }
+ /* check invalid packet */
+ else if (data[0] != 0X20)
+ return;
+
/* menu/view buttons */
input_report_key(dev, BTN_START, data[4] & 0x04);
input_report_key(dev, BTN_SELECT, data[4] & 0x08);
@@ -678,34 +701,6 @@ static void xpadone_process_buttons(struct usb_xpad *xpad,
input_sync(dev);
}
-/*
- * xpadone_process_packet
- *
- * Completes a request by converting the data into events for the
- * input subsystem. This version is for the Xbox One controller.
- *
- * The report format was gleaned from
- * https://github.com/kylelemons/xbox/blob/master/xbox.go
- */
-
-static void xpadone_process_packet(struct usb_xpad *xpad,
- u16 cmd, unsigned char *data)
-{
- struct input_dev *dev = xpad->dev;
-
- switch (data[0]) {
- case 0x20:
- xpadone_process_buttons(xpad, dev, data);
- break;
-
- case 0x07:
- /* the xbox button has its own special report */
- input_report_key(dev, BTN_MODE, data[4] & 0x01);
- input_sync(dev);
- break;
- }
-}
-
static void xpad_irq_in(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
@@ -850,10 +845,9 @@ static void xpad_irq_out(struct urb *urb)
spin_unlock_irqrestore(&xpad->odata_lock, flags);
}
-static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
+static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad,
+ struct usb_endpoint_descriptor *ep_irq_out)
{
- struct usb_endpoint_descriptor *ep_irq_out;
- int ep_irq_out_idx;
int error;
if (xpad->xtype == XTYPE_UNKNOWN)
@@ -863,23 +857,17 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->odata_dma);
- if (!xpad->odata) {
- error = -ENOMEM;
- goto fail1;
- }
+ if (!xpad->odata)
+ return -ENOMEM;
spin_lock_init(&xpad->odata_lock);
xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
if (!xpad->irq_out) {
error = -ENOMEM;
- goto fail2;
+ goto err_free_coherent;
}
- /* Xbox One controller has in/out endpoints swapped. */
- ep_irq_out_idx = xpad->xtype == XTYPE_XBOXONE ? 0 : 1;
- ep_irq_out = &intf->cur_altsetting->endpoint[ep_irq_out_idx].desc;
-
usb_fill_int_urb(xpad->irq_out, xpad->udev,
usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
xpad->odata, XPAD_PKT_LEN,
@@ -889,8 +877,9 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
return 0;
- fail2: usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
- fail1: return error;
+err_free_coherent:
+ usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
+ return error;
}
static void xpad_stop_output(struct usb_xpad *xpad)
@@ -974,6 +963,30 @@ static int xpad_start_xbox_one(struct usb_xpad *xpad)
return retval;
}
+static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num)
+{
+ unsigned long flags;
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_CMD_IDX];
+ static const u8 mode_report_ack[] = {
+ 0x01, 0x20, 0x00, 0x09, 0x00, 0x07, 0x20, 0x02,
+ 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ packet->len = sizeof(mode_report_ack);
+ memcpy(packet->data, mode_report_ack, packet->len);
+ packet->data[2] = seq_num;
+ packet->pending = true;
+
+ /* Reset the sequence so we send out the ack now */
+ xpad->last_out_packet = -1;
+ xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
+
#ifdef CONFIG_JOYSTICK_XPAD_FF
static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
{
@@ -1198,6 +1211,7 @@ static int xpad_led_probe(struct usb_xpad *xpad)
led_cdev = &led->led_cdev;
led_cdev->name = led->name;
led_cdev->brightness_set = xpad_led_set;
+ led_cdev->flags = LED_CORE_SUSPENDRESUME;
error = led_classdev_register(&xpad->udev->dev, led_cdev);
if (error)
@@ -1468,8 +1482,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_xpad *xpad;
- struct usb_endpoint_descriptor *ep_irq_in;
- int ep_irq_in_idx;
+ struct usb_endpoint_descriptor *ep_irq_in, *ep_irq_out;
int i, error;
if (intf->cur_altsetting->desc.bNumEndpoints != 2)
@@ -1539,13 +1552,26 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
goto err_free_in_urb;
}
- error = xpad_init_output(intf, xpad);
- if (error)
+ ep_irq_in = ep_irq_out = NULL;
+
+ for (i = 0; i < 2; i++) {
+ struct usb_endpoint_descriptor *ep =
+ &intf->cur_altsetting->endpoint[i].desc;
+
+ if (usb_endpoint_dir_in(ep))
+ ep_irq_in = ep;
+ else
+ ep_irq_out = ep;
+ }
+
+ if (!ep_irq_in || !ep_irq_out) {
+ error = -ENODEV;
goto err_free_in_urb;
+ }
- /* Xbox One controller has in/out endpoints swapped. */
- ep_irq_in_idx = xpad->xtype == XTYPE_XBOXONE ? 1 : 0;
- ep_irq_in = &intf->cur_altsetting->endpoint[ep_irq_in_idx].desc;
+ error = xpad_init_output(intf, xpad, ep_irq_out);
+ if (error)
+ goto err_free_in_urb;
usb_fill_int_urb(xpad->irq_in, udev,
usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
@@ -1662,8 +1688,16 @@ static int xpad_resume(struct usb_interface *intf)
retval = xpad360w_start_input(xpad);
} else {
mutex_lock(&input->mutex);
- if (input->users)
+ if (input->users) {
retval = xpad_start_input(xpad);
+ } else if (xpad->xtype == XTYPE_XBOXONE) {
+ /*
+ * Even if there are no users, we'll send Xbox One pads
+ * the startup sequence so they don't sit there and
+ * blink until somebody opens the input device again.
+ */
+ retval = xpad_start_xbox_one(xpad);
+ }
mutex_unlock(&input->mutex);
}
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index cbd75cf44739..97acd6524ad7 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -666,6 +666,17 @@ config KEYBOARD_TC3589X
To compile this driver as a module, choose M here: the
module will be called tc3589x-keypad.
+config KEYBOARD_TM2_TOUCHKEY
+ tristate "TM2 touchkey support"
+ depends on I2C
+ depends on LEDS_CLASS
+ help
+ Say Y here to enable device driver for tm2-touchkey with
+ LED control for the Exynos5433 TM2 board.
+
+ To compile this driver as a module, choose M here.
+ module will be called tm2-touchkey.
+
config KEYBOARD_TWL4030
tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
depends on TWL4030_CORE
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index d9f4cfcf3410..7d9acff819a7 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o
+obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY) += tm2-touchkey.o
obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o
diff --git a/drivers/input/keyboard/adc-keys.c b/drivers/input/keyboard/adc-keys.c
index f8cf2ccacefd..c255af21e71a 100644
--- a/drivers/input/keyboard/adc-keys.c
+++ b/drivers/input/keyboard/adc-keys.c
@@ -148,8 +148,6 @@ static int adc_keys_probe(struct platform_device *pdev)
if (error)
return error;
- platform_set_drvdata(pdev, st);
-
poll_dev = devm_input_allocate_polled_device(dev);
if (!poll_dev) {
dev_err(dev, "failed to allocate input device\n");
diff --git a/drivers/input/keyboard/adp5520-keys.c b/drivers/input/keyboard/adp5520-keys.c
index db1004dad108..f0b9b37bde58 100644
--- a/drivers/input/keyboard/adp5520-keys.c
+++ b/drivers/input/keyboard/adp5520-keys.c
@@ -107,8 +107,6 @@ static int adp5520_keys_probe(struct platform_device *pdev)
input->phys = "adp5520-keys/input0";
input->dev.parent = &pdev->dev;
- input_set_drvdata(input, dev);
-
input->id.bustype = BUS_I2C;
input->id.vendor = 0x0001;
input->id.product = 0x5520;
diff --git a/drivers/input/keyboard/bcm-keypad.c b/drivers/input/keyboard/bcm-keypad.c
index 86a8b723ae15..e1cf63ee148f 100644
--- a/drivers/input/keyboard/bcm-keypad.c
+++ b/drivers/input/keyboard/bcm-keypad.c
@@ -213,7 +213,7 @@ static int bcm_kp_matrix_key_parse_dt(struct bcm_kp *kp)
/* Initialize the KPCR Keypad Configuration Register */
kp->kpcr = KPCR_STATUSFILTERENABLE | KPCR_COLFILTERENABLE;
- error = matrix_keypad_parse_of_params(dev, &kp->n_rows, &kp->n_cols);
+ error = matrix_keypad_parse_properties(dev, &kp->n_rows, &kp->n_cols);
if (error) {
dev_err(dev, "failed to parse kp params\n");
return error;
@@ -352,8 +352,6 @@ static int bcm_kp_probe(struct platform_device *pdev)
kp->input_dev = input_dev;
- platform_set_drvdata(pdev, kp);
-
error = bcm_kp_matrix_key_parse_dt(kp);
if (error)
return error;
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index 81b07dddae86..39bcbc38997f 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -268,8 +268,6 @@ static int bfin_kpad_probe(struct platform_device *pdev)
input->phys = "bf54x-keys/input0";
input->dev.parent = &pdev->dev;
- input_set_drvdata(input, bf54x_kpad);
-
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 4401be225d64..1a1eacae3ea1 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -392,7 +392,6 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
return error;
dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev);
- i2c_set_clientdata(i2c_client, priv);
node = dev->of_node;
if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index 604c7ade8df2..6a250d65f8fe 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -535,7 +535,7 @@ static int cros_ec_keyb_register_matrix(struct cros_ec_keyb *ckdev)
const char *phys;
int err;
- err = matrix_keypad_parse_of_params(dev, &ckdev->rows, &ckdev->cols);
+ err = matrix_keypad_parse_properties(dev, &ckdev->rows, &ckdev->cols);
if (err)
return err;
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
index f363d1d2907a..b20a5d044caa 100644
--- a/drivers/input/keyboard/davinci_keyscan.c
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -172,7 +172,7 @@ static int __init davinci_ks_probe(struct platform_device *pdev)
struct input_dev *key_dev;
struct resource *res, *mem;
struct device *dev = &pdev->dev;
- struct davinci_ks_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct davinci_ks_platform_data *pdata = dev_get_platdata(dev);
int error, i;
if (pdata->device_enable) {
@@ -255,7 +255,7 @@ static int __init davinci_ks_probe(struct platform_device *pdev)
key_dev->name = "davinci_keyscan";
key_dev->phys = "davinci_keyscan/input0";
- key_dev->dev.parent = &pdev->dev;
+ key_dev->dev.parent = dev;
key_dev->id.bustype = BUS_HOST;
key_dev->id.vendor = 0x0001;
key_dev->id.product = 0x0001;
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 582462d0af75..9c92cdf196e3 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -36,6 +36,8 @@ struct gpio_button_data {
struct input_dev *input;
struct gpio_desc *gpiod;
+ unsigned short *code;
+
struct timer_list release_timer;
unsigned int release_delay; /* in msecs, for IRQ-only buttons */
@@ -52,6 +54,7 @@ struct gpio_keys_drvdata {
const struct gpio_keys_platform_data *pdata;
struct input_dev *input;
struct mutex disable_lock;
+ unsigned short *keymap;
struct gpio_button_data data[0];
};
@@ -203,7 +206,7 @@ static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata,
if (only_disabled && !bdata->disabled)
continue;
- __set_bit(bdata->button->code, bits);
+ __set_bit(*bdata->code, bits);
}
ret = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", n_events, bits);
@@ -254,7 +257,7 @@ static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata,
if (bdata->button->type != type)
continue;
- if (test_bit(bdata->button->code, bits) &&
+ if (test_bit(*bdata->code, bits) &&
!bdata->button->can_disable) {
error = -EINVAL;
goto out;
@@ -269,7 +272,7 @@ static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata,
if (bdata->button->type != type)
continue;
- if (test_bit(bdata->button->code, bits))
+ if (test_bit(*bdata->code, bits))
gpio_keys_disable_button(bdata);
else
gpio_keys_enable_button(bdata);
@@ -371,7 +374,7 @@ static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata)
if (state)
input_event(input, type, button->code, button->value);
} else {
- input_event(input, type, button->code, state);
+ input_event(input, type, *bdata->code, state);
}
input_sync(input);
}
@@ -411,7 +414,7 @@ static void gpio_keys_irq_timer(unsigned long _data)
spin_lock_irqsave(&bdata->lock, flags);
if (bdata->key_pressed) {
- input_event(input, EV_KEY, bdata->button->code, 0);
+ input_event(input, EV_KEY, *bdata->code, 0);
input_sync(input);
bdata->key_pressed = false;
}
@@ -421,7 +424,6 @@ static void gpio_keys_irq_timer(unsigned long _data)
static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
{
struct gpio_button_data *bdata = dev_id;
- const struct gpio_keys_button *button = bdata->button;
struct input_dev *input = bdata->input;
unsigned long flags;
@@ -433,11 +435,11 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
if (bdata->button->wakeup)
pm_wakeup_event(bdata->input->dev.parent, 0);
- input_event(input, EV_KEY, button->code, 1);
+ input_event(input, EV_KEY, *bdata->code, 1);
input_sync(input);
if (!bdata->release_delay) {
- input_event(input, EV_KEY, button->code, 0);
+ input_event(input, EV_KEY, *bdata->code, 0);
input_sync(input);
goto out;
}
@@ -465,12 +467,14 @@ static void gpio_keys_quiesce_key(void *data)
static int gpio_keys_setup_key(struct platform_device *pdev,
struct input_dev *input,
- struct gpio_button_data *bdata,
+ struct gpio_keys_drvdata *ddata,
const struct gpio_keys_button *button,
+ int idx,
struct fwnode_handle *child)
{
const char *desc = button->desc ? button->desc : "gpio_keys";
struct device *dev = &pdev->dev;
+ struct gpio_button_data *bdata = &ddata->data[idx];
irq_handler_t isr;
unsigned long irqflags;
int irq;
@@ -514,8 +518,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
if (button->active_low)
flags |= GPIOF_ACTIVE_LOW;
- error = devm_gpio_request_one(&pdev->dev, button->gpio, flags,
- desc);
+ error = devm_gpio_request_one(dev, button->gpio, flags, desc);
if (error < 0) {
dev_err(dev, "Failed to request GPIO %d, error %d\n",
button->gpio, error);
@@ -577,16 +580,17 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
irqflags = 0;
}
- input_set_capability(input, button->type ?: EV_KEY, button->code);
+ bdata->code = &ddata->keymap[idx];
+ *bdata->code = button->code;
+ input_set_capability(input, button->type ?: EV_KEY, *bdata->code);
/*
* Install custom action to cancel release timer and
* workqueue item.
*/
- error = devm_add_action(&pdev->dev, gpio_keys_quiesce_key, bdata);
+ error = devm_add_action(dev, gpio_keys_quiesce_key, bdata);
if (error) {
- dev_err(&pdev->dev,
- "failed to register quiesce action, error: %d\n",
+ dev_err(dev, "failed to register quiesce action, error: %d\n",
error);
return error;
}
@@ -598,8 +602,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
if (!button->can_disable)
irqflags |= IRQF_SHARED;
- error = devm_request_any_context_irq(&pdev->dev, bdata->irq,
- isr, irqflags, desc, bdata);
+ error = devm_request_any_context_irq(dev, bdata->irq, isr, irqflags,
+ desc, bdata);
if (error < 0) {
dev_err(dev, "Unable to claim irq %d; error %d\n",
bdata->irq, error);
@@ -750,6 +754,12 @@ static int gpio_keys_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ ddata->keymap = devm_kcalloc(dev,
+ pdata->nbuttons, sizeof(ddata->keymap[0]),
+ GFP_KERNEL);
+ if (!ddata->keymap)
+ return -ENOMEM;
+
input = devm_input_allocate_device(dev);
if (!input) {
dev_err(dev, "failed to allocate input device\n");
@@ -765,7 +775,7 @@ static int gpio_keys_probe(struct platform_device *pdev)
input->name = pdata->name ? : pdev->name;
input->phys = "gpio-keys/input0";
- input->dev.parent = &pdev->dev;
+ input->dev.parent = dev;
input->open = gpio_keys_open;
input->close = gpio_keys_close;
@@ -774,25 +784,29 @@ static int gpio_keys_probe(struct platform_device *pdev)
input->id.product = 0x0001;
input->id.version = 0x0100;
+ input->keycode = ddata->keymap;
+ input->keycodesize = sizeof(ddata->keymap[0]);
+ input->keycodemax = pdata->nbuttons;
+
/* Enable auto repeat feature of Linux input subsystem */
if (pdata->rep)
__set_bit(EV_REP, input->evbit);
for (i = 0; i < pdata->nbuttons; i++) {
const struct gpio_keys_button *button = &pdata->buttons[i];
- struct gpio_button_data *bdata = &ddata->data[i];
if (!dev_get_platdata(dev)) {
- child = device_get_next_child_node(&pdev->dev, child);
+ child = device_get_next_child_node(dev, child);
if (!child) {
- dev_err(&pdev->dev,
+ dev_err(dev,
"missing child device node for entry %d\n",
i);
return -EINVAL;
}
}
- error = gpio_keys_setup_key(pdev, input, bdata, button, child);
+ error = gpio_keys_setup_key(pdev, input, ddata,
+ button, i, child);
if (error) {
fwnode_handle_put(child);
return error;
@@ -804,7 +818,7 @@ static int gpio_keys_probe(struct platform_device *pdev)
fwnode_handle_put(child);
- error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);
+ error = sysfs_create_group(&dev->kobj, &gpio_keys_attr_group);
if (error) {
dev_err(dev, "Unable to export keys/switches, error: %d\n",
error);
@@ -818,12 +832,12 @@ static int gpio_keys_probe(struct platform_device *pdev)
goto err_remove_group;
}
- device_init_wakeup(&pdev->dev, wakeup);
+ device_init_wakeup(dev, wakeup);
return 0;
err_remove_group:
- sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
+ sysfs_remove_group(&dev->kobj, &gpio_keys_attr_group);
return error;
}
@@ -831,8 +845,6 @@ static int gpio_keys_remove(struct platform_device *pdev)
{
sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
- device_init_wakeup(&pdev->dev, 0);
-
return 0;
}
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index bed4f2086158..4fce43a6a0e0 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -252,13 +252,13 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
size = sizeof(struct gpio_keys_polled_dev) +
pdata->nbuttons * sizeof(struct gpio_keys_button_data);
- bdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ bdev = devm_kzalloc(dev, size, GFP_KERNEL);
if (!bdev) {
dev_err(dev, "no memory for private data\n");
return -ENOMEM;
}
- poll_dev = devm_input_allocate_polled_device(&pdev->dev);
+ poll_dev = devm_input_allocate_polled_device(dev);
if (!poll_dev) {
dev_err(dev, "no memory for polled device\n");
return -ENOMEM;
@@ -332,7 +332,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
if (button->active_low)
flags |= GPIOF_ACTIVE_LOW;
- error = devm_gpio_request_one(&pdev->dev, button->gpio,
+ error = devm_gpio_request_one(dev, button->gpio,
flags, button->desc ? : DRV_NAME);
if (error) {
dev_err(dev,
@@ -365,7 +365,6 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
bdev->poll_dev = poll_dev;
bdev->dev = dev;
bdev->pdata = pdata;
- platform_set_drvdata(pdev, bdev);
error = input_register_polled_device(poll_dev);
if (error) {
diff --git a/drivers/input/keyboard/jornada680_kbd.c b/drivers/input/keyboard/jornada680_kbd.c
index 80c81278ad2c..0116ac99f44c 100644
--- a/drivers/input/keyboard/jornada680_kbd.c
+++ b/drivers/input/keyboard/jornada680_kbd.c
@@ -197,8 +197,6 @@ static int jornada680kbd_probe(struct platform_device *pdev)
return -ENOMEM;
}
- platform_set_drvdata(pdev, jornadakbd);
-
jornadakbd->poll_dev = poll_dev;
memcpy(jornadakbd->keymap, jornada_scancodes,
diff --git a/drivers/input/keyboard/lpc32xx-keys.c b/drivers/input/keyboard/lpc32xx-keys.c
index 632523d4f5dc..1dd57ac0e7a2 100644
--- a/drivers/input/keyboard/lpc32xx-keys.c
+++ b/drivers/input/keyboard/lpc32xx-keys.c
@@ -145,7 +145,7 @@ static int lpc32xx_parse_dt(struct device *dev,
u32 rows = 0, columns = 0;
int err;
- err = matrix_keypad_parse_of_params(dev, &rows, &columns);
+ err = matrix_keypad_parse_properties(dev, &rows, &columns);
if (err)
return err;
if (rows != columns) {
diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c
index 5aa2361aef95..78e3567ec18c 100644
--- a/drivers/input/keyboard/maple_keyb.c
+++ b/drivers/input/keyboard/maple_keyb.c
@@ -196,7 +196,6 @@ static int probe_maple_kbd(struct device *dev)
__clear_bit(KEY_RESERVED, idev->keybit);
input_set_capability(idev, EV_MSC, MSC_SCAN);
- input_set_drvdata(idev, kbd);
error = input_register_device(idev);
if (error)
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 7f12b6579f82..18839cd5f76e 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -545,8 +545,6 @@ static int matrix_keypad_remove(struct platform_device *pdev)
{
struct matrix_keypad *keypad = platform_get_drvdata(pdev);
- device_init_wakeup(&pdev->dev, 0);
-
matrix_keypad_free_gpio(keypad);
input_unregister_device(keypad->input_dev);
kfree(keypad);
diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c
index 5091133b7b8e..cd44d22d8770 100644
--- a/drivers/input/keyboard/max7359_keypad.c
+++ b/drivers/input/keyboard/max7359_keypad.c
@@ -241,7 +241,6 @@ static int max7359_probe(struct i2c_client *client,
/* Initialize MAX7359 */
max7359_initialize(client);
- i2c_set_clientdata(client, keypad);
device_init_wakeup(&client->dev, 1);
return 0;
diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
index 0fd612dd76ed..884a74d8a7ed 100644
--- a/drivers/input/keyboard/mpr121_touchkey.c
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -12,14 +12,16 @@
*
*/
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
#include <linux/interrupt.h>
-#include <linux/i2c/mpr121_touchkey.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
/* Register definitions */
#define ELE_TOUCH_STATUS_0_ADDR 0x0
@@ -59,10 +61,9 @@
struct mpr121_touchkey {
struct i2c_client *client;
struct input_dev *input_dev;
- unsigned int key_val;
unsigned int statusbits;
unsigned int keycount;
- u16 keycodes[MPR121_MAX_KEY_COUNT];
+ u32 keycodes[MPR121_MAX_KEY_COUNT];
};
struct mpr121_init_register {
@@ -82,12 +83,49 @@ static const struct mpr121_init_register init_reg_table[] = {
{ AUTO_CONFIG_CTRL_ADDR, 0x0b },
};
+static void mpr121_vdd_supply_disable(void *data)
+{
+ struct regulator *vdd_supply = data;
+
+ regulator_disable(vdd_supply);
+}
+
+static struct regulator *mpr121_vdd_supply_init(struct device *dev)
+{
+ struct regulator *vdd_supply;
+ int err;
+
+ vdd_supply = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(vdd_supply)) {
+ dev_err(dev, "failed to get vdd regulator: %ld\n",
+ PTR_ERR(vdd_supply));
+ return vdd_supply;
+ }
+
+ err = regulator_enable(vdd_supply);
+ if (err) {
+ dev_err(dev, "failed to enable vdd regulator: %d\n", err);
+ return ERR_PTR(err);
+ }
+
+ err = devm_add_action(dev, mpr121_vdd_supply_disable, vdd_supply);
+ if (err) {
+ regulator_disable(vdd_supply);
+ dev_err(dev, "failed to add disable regulator action: %d\n",
+ err);
+ return ERR_PTR(err);
+ }
+
+ return vdd_supply;
+}
+
static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
{
struct mpr121_touchkey *mpr121 = dev_id;
struct i2c_client *client = mpr121->client;
struct input_dev *input = mpr121->input_dev;
- unsigned int key_num, key_val, pressed;
+ unsigned long bit_changed;
+ unsigned int key_num;
int reg;
reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);
@@ -105,26 +143,29 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
reg &= TOUCH_STATUS_MASK;
/* use old press bit to figure out which bit changed */
- key_num = ffs(reg ^ mpr121->statusbits) - 1;
- pressed = reg & (1 << key_num);
+ bit_changed = reg ^ mpr121->statusbits;
mpr121->statusbits = reg;
+ for_each_set_bit(key_num, &bit_changed, mpr121->keycount) {
+ unsigned int key_val, pressed;
- key_val = mpr121->keycodes[key_num];
+ pressed = reg & BIT(key_num);
+ key_val = mpr121->keycodes[key_num];
- input_event(input, EV_MSC, MSC_SCAN, key_num);
- input_report_key(input, key_val, pressed);
- input_sync(input);
+ input_event(input, EV_MSC, MSC_SCAN, key_num);
+ input_report_key(input, key_val, pressed);
- dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
- pressed ? "pressed" : "released");
+ dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
+ pressed ? "pressed" : "released");
+
+ }
+ input_sync(input);
out:
return IRQ_HANDLED;
}
-static int mpr121_phys_init(const struct mpr121_platform_data *pdata,
- struct mpr121_touchkey *mpr121,
- struct i2c_client *client)
+static int mpr121_phys_init(struct mpr121_touchkey *mpr121,
+ struct i2c_client *client, int vdd_uv)
{
const struct mpr121_init_register *reg;
unsigned char usl, lsl, tl, eleconf;
@@ -154,9 +195,9 @@ static int mpr121_phys_init(const struct mpr121_platform_data *pdata,
/*
* Capacitance on sensing input varies and needs to be compensated.
* The internal MPR121-auto-configuration can do this if it's
- * registers are set properly (based on pdata->vdd_uv).
+ * registers are set properly (based on vdd_uv).
*/
- vdd = pdata->vdd_uv / 1000;
+ vdd = vdd_uv / 1000;
usl = ((vdd - 700) * 256) / vdd;
lsl = (usl * 65) / 100;
tl = (usl * 90) / 100;
@@ -187,72 +228,77 @@ err_i2c_write:
static int mpr_touchkey_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct mpr121_platform_data *pdata =
- dev_get_platdata(&client->dev);
+ struct device *dev = &client->dev;
+ struct regulator *vdd_supply;
+ int vdd_uv;
struct mpr121_touchkey *mpr121;
struct input_dev *input_dev;
int error;
int i;
- if (!pdata) {
- dev_err(&client->dev, "no platform data defined\n");
- return -EINVAL;
- }
-
- if (!pdata->keymap || !pdata->keymap_size) {
- dev_err(&client->dev, "missing keymap data\n");
+ if (!client->irq) {
+ dev_err(dev, "irq number should not be zero\n");
return -EINVAL;
}
- if (pdata->keymap_size > MPR121_MAX_KEY_COUNT) {
- dev_err(&client->dev, "too many keys defined\n");
- return -EINVAL;
- }
+ vdd_supply = mpr121_vdd_supply_init(dev);
+ if (IS_ERR(vdd_supply))
+ return PTR_ERR(vdd_supply);
- if (!client->irq) {
- dev_err(&client->dev, "irq number should not be zero\n");
- return -EINVAL;
- }
+ vdd_uv = regulator_get_voltage(vdd_supply);
- mpr121 = devm_kzalloc(&client->dev, sizeof(*mpr121),
- GFP_KERNEL);
+ mpr121 = devm_kzalloc(dev, sizeof(*mpr121), GFP_KERNEL);
if (!mpr121)
return -ENOMEM;
- input_dev = devm_input_allocate_device(&client->dev);
+ input_dev = devm_input_allocate_device(dev);
if (!input_dev)
return -ENOMEM;
mpr121->client = client;
mpr121->input_dev = input_dev;
- mpr121->keycount = pdata->keymap_size;
+ mpr121->keycount = device_property_read_u32_array(dev, "linux,keycodes",
+ NULL, 0);
+ if (mpr121->keycount > MPR121_MAX_KEY_COUNT) {
+ dev_err(dev, "too many keys defined (%d)\n", mpr121->keycount);
+ return -EINVAL;
+ }
+
+ error = device_property_read_u32_array(dev, "linux,keycodes",
+ mpr121->keycodes,
+ mpr121->keycount);
+ if (error) {
+ dev_err(dev,
+ "failed to read linux,keycode property: %d\n", error);
+ return error;
+ }
input_dev->name = "Freescale MPR121 Touchkey";
input_dev->id.bustype = BUS_I2C;
- input_dev->dev.parent = &client->dev;
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ input_dev->dev.parent = dev;
+ if (device_property_read_bool(dev, "autorepeat"))
+ __set_bit(EV_REP, input_dev->evbit);
+ input_set_capability(input_dev, EV_MSC, MSC_SCAN);
input_dev->keycode = mpr121->keycodes;
input_dev->keycodesize = sizeof(mpr121->keycodes[0]);
input_dev->keycodemax = mpr121->keycount;
- for (i = 0; i < pdata->keymap_size; i++) {
- input_set_capability(input_dev, EV_KEY, pdata->keymap[i]);
- mpr121->keycodes[i] = pdata->keymap[i];
- }
+ for (i = 0; i < mpr121->keycount; i++)
+ input_set_capability(input_dev, EV_KEY, mpr121->keycodes[i]);
- error = mpr121_phys_init(pdata, mpr121, client);
+ error = mpr121_phys_init(mpr121, client, vdd_uv);
if (error) {
- dev_err(&client->dev, "Failed to init register\n");
+ dev_err(dev, "Failed to init register\n");
return error;
}
- error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
- mpr_touchkey_interrupt,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- client->dev.driver->name, mpr121);
+ error = devm_request_threaded_irq(dev, client->irq, NULL,
+ mpr_touchkey_interrupt,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev->driver->name, mpr121);
if (error) {
- dev_err(&client->dev, "Failed to register interrupt\n");
+ dev_err(dev, "Failed to register interrupt\n");
return error;
}
@@ -261,13 +307,13 @@ static int mpr_touchkey_probe(struct i2c_client *client,
return error;
i2c_set_clientdata(client, mpr121);
- device_init_wakeup(&client->dev, pdata->wakeup);
+ device_init_wakeup(dev,
+ device_property_read_bool(dev, "wakeup-source"));
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int mpr_suspend(struct device *dev)
+static int __maybe_unused mpr_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -279,7 +325,7 @@ static int mpr_suspend(struct device *dev)
return 0;
}
-static int mpr_resume(struct device *dev)
+static int __maybe_unused mpr_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
@@ -292,7 +338,6 @@ static int mpr_resume(struct device *dev)
return 0;
}
-#endif
static SIMPLE_DEV_PM_OPS(mpr121_touchkey_pm_ops, mpr_suspend, mpr_resume);
@@ -302,10 +347,19 @@ static const struct i2c_device_id mpr121_id[] = {
};
MODULE_DEVICE_TABLE(i2c, mpr121_id);
+#ifdef CONFIG_OF
+static const struct of_device_id mpr121_touchkey_dt_match_table[] = {
+ { .compatible = "fsl,mpr121-touchkey" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mpr121_touchkey_dt_match_table);
+#endif
+
static struct i2c_driver mpr_touchkey_driver = {
.driver = {
.name = "mpr121",
.pm = &mpr121_touchkey_pm_ops,
+ .of_match_table = of_match_ptr(mpr121_touchkey_dt_match_table),
},
.id_table = mpr121_id,
.probe = mpr_touchkey_probe,
diff --git a/drivers/input/keyboard/nspire-keypad.c b/drivers/input/keyboard/nspire-keypad.c
index 7abfd34eb87e..c7f26fa3034c 100644
--- a/drivers/input/keyboard/nspire-keypad.c
+++ b/drivers/input/keyboard/nspire-keypad.c
@@ -249,8 +249,6 @@ static int nspire_keypad_probe(struct platform_device *pdev)
return error;
}
- platform_set_drvdata(pdev, keypad);
-
dev_dbg(&pdev->dev,
"TI-NSPIRE keypad at %pR (scan_interval=%uus, row_delay=%uus%s)\n",
res, keypad->row_delay, keypad->scan_interval,
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 6639b2b8528a..ebc67ba41fe2 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -223,8 +223,8 @@ static int omap4_keypad_parse_dt(struct device *dev,
struct device_node *np = dev->of_node;
int err;
- err = matrix_keypad_parse_of_params(dev, &keypad_data->rows,
- &keypad_data->cols);
+ err = matrix_keypad_parse_properties(dev, &keypad_data->rows,
+ &keypad_data->cols);
if (err)
return err;
@@ -375,7 +375,6 @@ static int omap4_keypad_probe(struct platform_device *pdev)
err_pm_disable:
pm_runtime_disable(&pdev->dev);
- device_init_wakeup(&pdev->dev, false);
free_irq(keypad_data->irq, keypad_data);
err_free_keymap:
kfree(keypad_data->keymap);
@@ -401,8 +400,6 @@ static int omap4_keypad_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
- device_init_wakeup(&pdev->dev, false);
-
input_unregister_device(keypad_data->input);
iounmap(keypad_data->base);
diff --git a/drivers/input/keyboard/opencores-kbd.c b/drivers/input/keyboard/opencores-kbd.c
index f8502bb29176..d62b4068c077 100644
--- a/drivers/input/keyboard/opencores-kbd.c
+++ b/drivers/input/keyboard/opencores-kbd.c
@@ -75,8 +75,6 @@ static int opencores_kbd_probe(struct platform_device *pdev)
input->name = pdev->name;
input->phys = "opencores-kbd/input0";
- input_set_drvdata(input, opencores_kbd);
-
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
@@ -112,8 +110,6 @@ static int opencores_kbd_probe(struct platform_device *pdev)
return error;
}
- platform_set_drvdata(pdev, opencores_kbd);
-
return 0;
}
diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
index 5c68e3f096bc..97c5424f49b9 100644
--- a/drivers/input/keyboard/pmic8xxx-keypad.c
+++ b/drivers/input/keyboard/pmic8xxx-keypad.c
@@ -515,7 +515,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
int rc;
unsigned int ctrl_val;
- rc = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
+ rc = matrix_keypad_parse_properties(&pdev->dev, &rows, &cols);
if (rc)
return rc;
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index e24443376e75..3841fa30db33 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -126,7 +126,7 @@ static int pxa27x_keypad_matrix_key_parse_dt(struct pxa27x_keypad *keypad,
u32 rows, cols;
int error;
- error = matrix_keypad_parse_of_params(dev, &rows, &cols);
+ error = matrix_keypad_parse_properties(dev, &rows, &cols);
if (error)
return error;
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index 4e319eb9e19d..316414465c77 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -445,7 +445,6 @@ static int samsung_keypad_probe(struct platform_device *pdev)
err_disable_runtime_pm:
pm_runtime_disable(&pdev->dev);
- device_init_wakeup(&pdev->dev, 0);
err_unprepare_clk:
clk_unprepare(keypad->clk);
return error;
@@ -456,7 +455,6 @@ static int samsung_keypad_remove(struct platform_device *pdev)
struct samsung_keypad *keypad = platform_get_drvdata(pdev);
pm_runtime_disable(&pdev->dev);
- device_init_wakeup(&pdev->dev, 0);
input_unregister_device(keypad->input_dev);
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index 8083eaa0524a..7d25fa338ab4 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -283,8 +283,6 @@ static int spear_kbd_remove(struct platform_device *pdev)
input_unregister_device(kbd->input);
clk_unprepare(kbd->clk);
- device_init_wakeup(&pdev->dev, 0);
-
return 0;
}
diff --git a/drivers/input/keyboard/st-keyscan.c b/drivers/input/keyboard/st-keyscan.c
index de7be4f03d91..babcfb165e4f 100644
--- a/drivers/input/keyboard/st-keyscan.c
+++ b/drivers/input/keyboard/st-keyscan.c
@@ -106,8 +106,8 @@ static int keypad_matrix_key_parse_dt(struct st_keyscan *keypad_data)
struct device_node *np = dev->of_node;
int error;
- error = matrix_keypad_parse_of_params(dev, &keypad_data->n_rows,
- &keypad_data->n_cols);
+ error = matrix_keypad_parse_properties(dev, &keypad_data->n_rows,
+ &keypad_data->n_cols);
if (error) {
dev_err(dev, "failed to parse keypad params\n");
return error;
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
index fe6e3f22eed7..8c6c0b9109c7 100644
--- a/drivers/input/keyboard/stmpe-keypad.c
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -354,7 +354,7 @@ static int stmpe_keypad_probe(struct platform_device *pdev)
input->id.bustype = BUS_I2C;
input->dev.parent = &pdev->dev;
- error = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
+ error = matrix_keypad_parse_properties(&pdev->dev, &rows, &cols);
if (error)
return error;
diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c
index cc8f7ddcee53..a37c172452e6 100644
--- a/drivers/input/keyboard/sun4i-lradc-keys.c
+++ b/drivers/input/keyboard/sun4i-lradc-keys.c
@@ -261,7 +261,6 @@ static int sun4i_lradc_probe(struct platform_device *pdev)
if (error)
return error;
- platform_set_drvdata(pdev, lradc);
return 0;
}
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
index 3048ef3e3e16..44dd7689c571 100644
--- a/drivers/input/keyboard/tca8418_keypad.c
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -24,18 +24,17 @@
* alternative licensing inquiries.
*/
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
+#include <linux/init.h>
#include <linux/input.h>
-#include <linux/input/tca8418_keypad.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/of.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/types.h>
/* TCA8418 hardware limits */
#define TCA8418_MAX_ROWS 8
@@ -264,41 +263,25 @@ static int tca8418_configure(struct tca8418_keypad *keypad_data,
}
static int tca8418_keypad_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+ const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
- const struct tca8418_keypad_platform_data *pdata =
- dev_get_platdata(dev);
struct tca8418_keypad *keypad_data;
struct input_dev *input;
- const struct matrix_keymap_data *keymap_data = NULL;
u32 rows = 0, cols = 0;
- bool rep = false;
- bool irq_is_gpio = false;
- int irq;
int error, row_shift, max_keys;
- /* Copy the platform data */
- if (pdata) {
- if (!pdata->keymap_data) {
- dev_err(dev, "no keymap data defined\n");
- return -EINVAL;
- }
- keymap_data = pdata->keymap_data;
- rows = pdata->rows;
- cols = pdata->cols;
- rep = pdata->rep;
- irq_is_gpio = pdata->irq_is_gpio;
- } else {
- struct device_node *np = dev->of_node;
- int err;
-
- err = matrix_keypad_parse_of_params(dev, &rows, &cols);
- if (err)
- return err;
- rep = of_property_read_bool(np, "keypad,autorepeat");
+ /* Check i2c driver capabilities */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
+ dev_err(dev, "%s adapter not supported\n",
+ dev_driver_string(&client->adapter->dev));
+ return -ENODEV;
}
+ error = matrix_keypad_parse_properties(dev, &rows, &cols);
+ if (error)
+ return error;
+
if (!rows || rows > TCA8418_MAX_ROWS) {
dev_err(dev, "invalid rows\n");
return -EINVAL;
@@ -309,13 +292,6 @@ static int tca8418_keypad_probe(struct i2c_client *client,
return -EINVAL;
}
- /* Check i2c driver capabilities */
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
- dev_err(dev, "%s adapter not supported\n",
- dev_driver_string(&client->adapter->dev));
- return -ENODEV;
- }
-
row_shift = get_count_order(cols);
max_keys = rows << row_shift;
@@ -345,27 +321,20 @@ static int tca8418_keypad_probe(struct i2c_client *client,
input->id.product = 0x001;
input->id.version = 0x0001;
- error = matrix_keypad_build_keymap(keymap_data, NULL, rows, cols,
- NULL, input);
+ error = matrix_keypad_build_keymap(NULL, NULL, rows, cols, NULL, input);
if (error) {
dev_err(dev, "Failed to build keymap\n");
return error;
}
- if (rep)
+ if (device_property_read_bool(dev, "keypad,autorepeat"))
__set_bit(EV_REP, input->evbit);
- input_set_capability(input, EV_MSC, MSC_SCAN);
-
- input_set_drvdata(input, keypad_data);
- irq = client->irq;
- if (irq_is_gpio)
- irq = gpio_to_irq(irq);
+ input_set_capability(input, EV_MSC, MSC_SCAN);
- error = devm_request_threaded_irq(dev, irq, NULL, tca8418_irq_handler,
- IRQF_TRIGGER_FALLING |
- IRQF_SHARED |
- IRQF_ONESHOT,
+ error = devm_request_threaded_irq(dev, client->irq,
+ NULL, tca8418_irq_handler,
+ IRQF_SHARED | IRQF_ONESHOT,
client->name, keypad_data);
if (error) {
dev_err(dev, "Unable to claim irq %d; error %d\n",
@@ -384,30 +353,21 @@ static int tca8418_keypad_probe(struct i2c_client *client,
}
static const struct i2c_device_id tca8418_id[] = {
- { TCA8418_NAME, 8418, },
+ { "tca8418", 8418, },
{ }
};
MODULE_DEVICE_TABLE(i2c, tca8418_id);
-#ifdef CONFIG_OF
static const struct of_device_id tca8418_dt_ids[] = {
{ .compatible = "ti,tca8418", },
{ }
};
MODULE_DEVICE_TABLE(of, tca8418_dt_ids);
-/*
- * The device tree based i2c loader looks for
- * "i2c:" + second_component_of(property("compatible"))
- * and therefore we need an alias to be found.
- */
-MODULE_ALIAS("i2c:tca8418");
-#endif
-
static struct i2c_driver tca8418_keypad_driver = {
.driver = {
- .name = TCA8418_NAME,
- .of_match_table = of_match_ptr(tca8418_dt_ids),
+ .name = "tca8418_keypad",
+ .of_match_table = tca8418_dt_ids,
},
.probe = tca8418_keypad_probe,
.id_table = tca8418_id,
diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c
new file mode 100644
index 000000000000..485900f953e0
--- /dev/null
+++ b/drivers/input/keyboard/tm2-touchkey.c
@@ -0,0 +1,284 @@
+/*
+ * TM2 touchkey device driver
+ *
+ * Copyright 2005 Phil Blundell
+ * Copyright 2016 Samsung Electronics Co., Ltd.
+ *
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ * Author: Jaechul Lee <jcsing.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/regulator/consumer.h>
+
+#define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey"
+#define TM2_TOUCHKEY_KEYCODE_REG 0x03
+#define TM2_TOUCHKEY_BASE_REG 0x00
+#define TM2_TOUCHKEY_CMD_LED_ON 0x10
+#define TM2_TOUCHKEY_CMD_LED_OFF 0x20
+#define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3)
+#define TM2_TOUCHKEY_BIT_KEYCODE GENMASK(2, 0)
+#define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000
+#define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000
+
+enum {
+ TM2_TOUCHKEY_KEY_MENU = 0x1,
+ TM2_TOUCHKEY_KEY_BACK,
+};
+
+struct tm2_touchkey_data {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct led_classdev led_dev;
+ struct regulator *vdd;
+ struct regulator_bulk_data regulators[2];
+};
+
+static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
+ enum led_brightness brightness)
+{
+ struct tm2_touchkey_data *touchkey =
+ container_of(led_dev, struct tm2_touchkey_data, led_dev);
+ u32 volt;
+ u8 data;
+
+ if (brightness == LED_OFF) {
+ volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN;
+ data = TM2_TOUCHKEY_CMD_LED_OFF;
+ } else {
+ volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX;
+ data = TM2_TOUCHKEY_CMD_LED_ON;
+ }
+
+ regulator_set_voltage(touchkey->vdd, volt, volt);
+ i2c_smbus_write_byte_data(touchkey->client,
+ TM2_TOUCHKEY_BASE_REG, data);
+}
+
+static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey)
+{
+ int error;
+
+ error = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators),
+ touchkey->regulators);
+ if (error)
+ return error;
+
+ /* waiting for device initialization, at least 150ms */
+ msleep(150);
+
+ return 0;
+}
+
+static void tm2_touchkey_power_disable(void *data)
+{
+ struct tm2_touchkey_data *touchkey = data;
+
+ regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators),
+ touchkey->regulators);
+}
+
+static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
+{
+ struct tm2_touchkey_data *touchkey = devid;
+ int data;
+ int key;
+
+ data = i2c_smbus_read_byte_data(touchkey->client,
+ TM2_TOUCHKEY_KEYCODE_REG);
+ if (data < 0) {
+ dev_err(&touchkey->client->dev,
+ "failed to read i2c data: %d\n", data);
+ goto out;
+ }
+
+ switch (data & TM2_TOUCHKEY_BIT_KEYCODE) {
+ case TM2_TOUCHKEY_KEY_MENU:
+ key = KEY_PHONE;
+ break;
+
+ case TM2_TOUCHKEY_KEY_BACK:
+ key = KEY_BACK;
+ break;
+
+ default:
+ dev_warn(&touchkey->client->dev,
+ "unhandled keycode, data %#02x\n", data);
+ goto out;
+ }
+
+ if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
+ input_report_key(touchkey->input_dev, KEY_PHONE, 0);
+ input_report_key(touchkey->input_dev, KEY_BACK, 0);
+ } else {
+ input_report_key(touchkey->input_dev, key, 1);
+ }
+
+ input_sync(touchkey->input_dev);
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int tm2_touchkey_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tm2_touchkey_data *touchkey;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "incompatible I2C adapter\n");
+ return -EIO;
+ }
+
+ touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL);
+ if (!touchkey)
+ return -ENOMEM;
+
+ touchkey->client = client;
+ i2c_set_clientdata(client, touchkey);
+
+ touchkey->regulators[0].supply = "vcc";
+ touchkey->regulators[1].supply = "vdd";
+ error = devm_regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(touchkey->regulators),
+ touchkey->regulators);
+ if (error) {
+ dev_err(&client->dev, "failed to get regulators: %d\n", error);
+ return error;
+ }
+
+ /* Save VDD for easy access */
+ touchkey->vdd = touchkey->regulators[1].consumer;
+
+ error = tm2_touchkey_power_enable(touchkey);
+ if (error) {
+ dev_err(&client->dev, "failed to power up device: %d\n", error);
+ return error;
+ }
+
+ error = devm_add_action_or_reset(&client->dev,
+ tm2_touchkey_power_disable, touchkey);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to install poweroff handler: %d\n", error);
+ return error;
+ }
+
+ /* input device */
+ touchkey->input_dev = devm_input_allocate_device(&client->dev);
+ if (!touchkey->input_dev) {
+ dev_err(&client->dev, "failed to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME;
+ touchkey->input_dev->id.bustype = BUS_I2C;
+
+ input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE);
+ input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK);
+
+ error = input_register_device(touchkey->input_dev);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to register input device: %d\n", error);
+ return error;
+ }
+
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, tm2_touchkey_irq_handler,
+ IRQF_ONESHOT,
+ TM2_TOUCHKEY_DEV_NAME, touchkey);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to request threaded irq: %d\n", error);
+ return error;
+ }
+
+ /* led device */
+ touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME;
+ touchkey->led_dev.brightness = LED_FULL;
+ touchkey->led_dev.max_brightness = LED_FULL;
+ touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set;
+
+ error = devm_led_classdev_register(&client->dev, &touchkey->led_dev);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to register touchkey led: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused tm2_touchkey_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
+
+ disable_irq(client->irq);
+ tm2_touchkey_power_disable(touchkey);
+
+ return 0;
+}
+
+static int __maybe_unused tm2_touchkey_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
+ int ret;
+
+ enable_irq(client->irq);
+
+ ret = tm2_touchkey_power_enable(touchkey);
+ if (ret)
+ dev_err(dev, "failed to enable power: %d\n", ret);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops,
+ tm2_touchkey_suspend, tm2_touchkey_resume);
+
+static const struct i2c_device_id tm2_touchkey_id_table[] = {
+ { TM2_TOUCHKEY_DEV_NAME, 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table);
+
+static const struct of_device_id tm2_touchkey_of_match[] = {
+ { .compatible = "cypress,tm2-touchkey", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match);
+
+static struct i2c_driver tm2_touchkey_driver = {
+ .driver = {
+ .name = TM2_TOUCHKEY_DEV_NAME,
+ .pm = &tm2_touchkey_pm_ops,
+ .of_match_table = of_match_ptr(tm2_touchkey_of_match),
+ },
+ .probe = tm2_touchkey_probe,
+ .id_table = tm2_touchkey_id_table,
+};
+module_i2c_driver(tm2_touchkey_driver);
+
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>");
+MODULE_DESCRIPTION("Samsung touchkey driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 323a0fb575a4..39e72b3219d8 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -374,8 +374,8 @@ static int twl4030_kp_probe(struct platform_device *pdev)
kp->autorepeat = pdata->rep;
keymap_data = pdata->keymap_data;
} else {
- error = matrix_keypad_parse_of_params(&pdev->dev, &kp->n_rows,
- &kp->n_cols);
+ error = matrix_keypad_parse_properties(&pdev->dev, &kp->n_rows,
+ &kp->n_cols);
if (error)
return error;
@@ -441,7 +441,6 @@ static int twl4030_kp_probe(struct platform_device *pdev)
return -EIO;
}
- platform_set_drvdata(pdev, kp);
return 0;
}
diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c
index 08b61f506db6..8ccefc15c7a4 100644
--- a/drivers/input/matrix-keymap.c
+++ b/drivers/input/matrix-keymap.c
@@ -14,18 +14,18 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
#include <linux/input.h>
-#include <linux/of.h>
-#include <linux/export.h>
-#include <linux/module.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/types.h>
static bool matrix_keypad_map_key(struct input_dev *input_dev,
unsigned int rows, unsigned int cols,
@@ -49,18 +49,22 @@ static bool matrix_keypad_map_key(struct input_dev *input_dev,
return true;
}
-#ifdef CONFIG_OF
-int matrix_keypad_parse_of_params(struct device *dev,
- unsigned int *rows, unsigned int *cols)
+/**
+ * matrix_keypad_parse_properties() - Read properties of matrix keypad
+ *
+ * @dev: Device containing properties
+ * @rows: Returns number of matrix rows
+ * @cols: Returns number of matrix columns
+ * @return 0 if OK, <0 on error
+ */
+int matrix_keypad_parse_properties(struct device *dev,
+ unsigned int *rows, unsigned int *cols)
{
- struct device_node *np = dev->of_node;
+ *rows = *cols = 0;
+
+ device_property_read_u32(dev, "keypad,num-rows", rows);
+ device_property_read_u32(dev, "keypad,num-columns", cols);
- if (!np) {
- dev_err(dev, "missing DT data");
- return -EINVAL;
- }
- of_property_read_u32(np, "keypad,num-rows", rows);
- of_property_read_u32(np, "keypad,num-columns", cols);
if (!*rows || !*cols) {
dev_err(dev, "number of keypad rows/columns not specified\n");
return -EINVAL;
@@ -68,62 +72,61 @@ int matrix_keypad_parse_of_params(struct device *dev,
return 0;
}
-EXPORT_SYMBOL_GPL(matrix_keypad_parse_of_params);
+EXPORT_SYMBOL_GPL(matrix_keypad_parse_properties);
-static int matrix_keypad_parse_of_keymap(const char *propname,
- unsigned int rows, unsigned int cols,
- struct input_dev *input_dev)
+static int matrix_keypad_parse_keymap(const char *propname,
+ unsigned int rows, unsigned int cols,
+ struct input_dev *input_dev)
{
struct device *dev = input_dev->dev.parent;
- struct device_node *np = dev->of_node;
unsigned int row_shift = get_count_order(cols);
unsigned int max_keys = rows << row_shift;
- unsigned int proplen, i, size;
- const __be32 *prop;
-
- if (!np)
- return -ENOENT;
+ u32 *keys;
+ int i;
+ int size;
+ int retval;
if (!propname)
propname = "linux,keymap";
- prop = of_get_property(np, propname, &proplen);
- if (!prop) {
- dev_err(dev, "OF: %s property not defined in %s\n",
- propname, np->full_name);
- return -ENOENT;
+ size = device_property_read_u32_array(dev, propname, NULL, 0);
+ if (size <= 0) {
+ dev_err(dev, "missing or malformed property %s: %d\n",
+ propname, size);
+ return size < 0 ? size : -EINVAL;
}
- if (proplen % sizeof(u32)) {
- dev_err(dev, "OF: Malformed keycode property %s in %s\n",
- propname, np->full_name);
+ if (size > max_keys) {
+ dev_err(dev, "%s size overflow (%d vs max %u)\n",
+ propname, size, max_keys);
return -EINVAL;
}
- size = proplen / sizeof(u32);
- if (size > max_keys) {
- dev_err(dev, "OF: %s size overflow\n", propname);
- return -EINVAL;
+ keys = kmalloc_array(size, sizeof(u32), GFP_KERNEL);
+ if (!keys)
+ return -ENOMEM;
+
+ retval = device_property_read_u32_array(dev, propname, keys, size);
+ if (retval) {
+ dev_err(dev, "failed to read %s property: %d\n",
+ propname, retval);
+ goto out;
}
for (i = 0; i < size; i++) {
- unsigned int key = be32_to_cpup(prop + i);
-
if (!matrix_keypad_map_key(input_dev, rows, cols,
- row_shift, key))
- return -EINVAL;
+ row_shift, keys[i])) {
+ retval = -EINVAL;
+ goto out;
+ }
}
- return 0;
-}
-#else
-static int matrix_keypad_parse_of_keymap(const char *propname,
- unsigned int rows, unsigned int cols,
- struct input_dev *input_dev)
-{
- return -ENOSYS;
+ retval = 0;
+
+out:
+ kfree(keys);
+ return retval;
}
-#endif
/**
* matrix_keypad_build_keymap - convert platform keymap into matrix keymap
@@ -192,8 +195,8 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
return -EINVAL;
}
} else {
- error = matrix_keypad_parse_of_keymap(keymap_name, rows, cols,
- input_dev);
+ error = matrix_keypad_parse_keymap(keymap_name, rows, cols,
+ input_dev);
if (error)
return error;
}
diff --git a/drivers/input/misc/88pm80x_onkey.c b/drivers/input/misc/88pm80x_onkey.c
index cf9908f1e5d5..45a09497f680 100644
--- a/drivers/input/misc/88pm80x_onkey.c
+++ b/drivers/input/misc/88pm80x_onkey.c
@@ -143,7 +143,6 @@ static int pm80x_onkey_remove(struct platform_device *pdev)
{
struct pm80x_onkey_info *info = platform_get_drvdata(pdev);
- device_init_wakeup(&pdev->dev, 0);
pm80x_free_irq(info->pm80x, info->irq, info);
input_unregister_device(info->idev);
kfree(info);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 1ae4d9617ff8..5b6c52210d20 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -234,16 +234,6 @@ config INPUT_MMA8450
To compile this driver as a module, choose M here: the
module will be called mma8450.
-config INPUT_MPU3050
- tristate "MPU3050 Triaxial gyroscope sensor"
- depends on I2C
- help
- Say Y here if you want to support InvenSense MPU3050
- connected via an I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called mpu3050.
-
config INPUT_APANEL
tristate "Fujitsu Lifebook Application Panel buttons"
depends on X86 && I2C && LEDS_CLASS
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 0b6d025f0487..b10523f2878e 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -48,7 +48,6 @@ obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o
obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o
obj-$(CONFIG_INPUT_MMA8450) += mma8450.o
-obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o
obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON) += palmas-pwrbutton.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
diff --git a/drivers/input/misc/ab8500-ponkey.c b/drivers/input/misc/ab8500-ponkey.c
index 4f5ef5bb535b..a33ed5710b15 100644
--- a/drivers/input/misc/ab8500-ponkey.c
+++ b/drivers/input/misc/ab8500-ponkey.c
@@ -109,7 +109,6 @@ static int ab8500_ponkey_probe(struct platform_device *pdev)
return error;
}
- platform_set_drvdata(pdev, ponkey);
return 0;
}
diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c
index 07ec465f1095..21dc1b8b2a4a 100644
--- a/drivers/input/misc/arizona-haptics.c
+++ b/drivers/input/misc/arizona-haptics.c
@@ -201,8 +201,6 @@ static int arizona_haptics_probe(struct platform_device *pdev)
return ret;
}
- platform_set_drvdata(pdev, haptics);
-
return 0;
}
diff --git a/drivers/input/misc/atmel_captouch.c b/drivers/input/misc/atmel_captouch.c
index 941265415a89..c4c0f4bb7627 100644
--- a/drivers/input/misc/atmel_captouch.c
+++ b/drivers/input/misc/atmel_captouch.c
@@ -191,7 +191,6 @@ static int atmel_captouch_probe(struct i2c_client *client,
return -ENOMEM;
capdev->client = client;
- i2c_set_clientdata(client, capdev);
err = atmel_read(capdev, REG_KEY_STATE,
&capdev->prev_btn, sizeof(capdev->prev_btn));
diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c
index a0fc18fdfc0c..799ce3d2820e 100644
--- a/drivers/input/misc/bfin_rotary.c
+++ b/drivers/input/misc/bfin_rotary.c
@@ -147,19 +147,18 @@ static int bfin_rotary_probe(struct platform_device *pdev)
if (pdata->pin_list) {
error = peripheral_request_list(pdata->pin_list,
- dev_name(&pdev->dev));
+ dev_name(dev));
if (error) {
dev_err(dev, "requesting peripherals failed: %d\n",
error);
return error;
}
- error = devm_add_action(dev, bfin_rotary_free_action,
- pdata->pin_list);
+ error = devm_add_action_or_reset(dev, bfin_rotary_free_action,
+ pdata->pin_list);
if (error) {
dev_err(dev, "setting cleanup action failed: %d\n",
error);
- peripheral_free_list(pdata->pin_list);
return error;
}
}
@@ -189,7 +188,7 @@ static int bfin_rotary_probe(struct platform_device *pdev)
input->name = pdev->name;
input->phys = "bfin-rotary/input0";
- input->dev.parent = &pdev->dev;
+ input->dev.parent = dev;
input_set_drvdata(input, rotary);
@@ -239,7 +238,7 @@ static int bfin_rotary_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, rotary);
- device_init_wakeup(&pdev->dev, 1);
+ device_init_wakeup(dev, 1);
return 0;
}
diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c
index 2124390ec38c..1fa85379f86c 100644
--- a/drivers/input/misc/bma150.c
+++ b/drivers/input/misc/bma150.c
@@ -207,7 +207,7 @@ static int bma150_set_mode(struct bma150_data *bma150, u8 mode)
return error;
if (mode == BMA150_MODE_NORMAL)
- msleep(2);
+ usleep_range(2000, 2100);
bma150->mode = mode;
return 0;
@@ -222,7 +222,7 @@ static int bma150_soft_reset(struct bma150_data *bma150)
if (error)
return error;
- msleep(2);
+ usleep_range(2000, 2100);
return 0;
}
diff --git a/drivers/input/misc/da9063_onkey.c b/drivers/input/misc/da9063_onkey.c
index b4ff1e86d3d3..3e9c353d82ef 100644
--- a/drivers/input/misc/da9063_onkey.c
+++ b/drivers/input/misc/da9063_onkey.c
@@ -287,7 +287,6 @@ static int da9063_onkey_probe(struct platform_device *pdev)
return error;
}
- platform_set_drvdata(pdev, onkey);
return 0;
}
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
index b6b7bd4e5462..82e272ebc0ed 100644
--- a/drivers/input/misc/dm355evm_keys.c
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -195,8 +195,6 @@ static int dm355evm_keys_probe(struct platform_device *pdev)
goto fail1;
keys->irq = status;
- input_set_drvdata(input, keys);
-
input->name = "DM355 EVM Controls";
input->phys = "dm355evm/input0";
input->dev.parent = &pdev->dev;
diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c
index 0a2b865b1000..fb089d36c0d6 100644
--- a/drivers/input/misc/drv260x.c
+++ b/drivers/input/misc/drv260x.c
@@ -538,7 +538,7 @@ static int drv260x_probe(struct i2c_client *client,
haptics->input_dev = devm_input_allocate_device(dev);
if (!haptics->input_dev) {
- dev_err(&client->dev, "Failed to allocate input device\n");
+ dev_err(dev, "Failed to allocate input device\n");
return -ENOMEM;
}
diff --git a/drivers/input/misc/e3x0-button.c b/drivers/input/misc/e3x0-button.c
index 13bfca8a7b16..e956cf1d273f 100644
--- a/drivers/input/misc/e3x0-button.c
+++ b/drivers/input/misc/e3x0-button.c
@@ -120,17 +120,10 @@ static int e3x0_button_probe(struct platform_device *pdev)
return error;
}
- platform_set_drvdata(pdev, input);
device_init_wakeup(&pdev->dev, 1);
return 0;
}
-static int e3x0_button_remove(struct platform_device *pdev)
-{
- device_init_wakeup(&pdev->dev, 0);
- return 0;
-}
-
#ifdef CONFIG_OF
static const struct of_device_id e3x0_button_match[] = {
{ .compatible = "ettus,e3x0-button", },
@@ -146,7 +139,6 @@ static struct platform_driver e3x0_button_driver = {
.pm = &e3x0_button_pm_ops,
},
.probe = e3x0_button_probe,
- .remove = e3x0_button_remove,
};
module_platform_driver(e3x0_button_driver);
diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
index 3bfdfcc20485..c6a29e57b5e4 100644
--- a/drivers/input/misc/gp2ap002a00f.c
+++ b/drivers/input/misc/gp2ap002a00f.c
@@ -210,8 +210,6 @@ static int gp2a_remove(struct i2c_client *client)
struct gp2a_data *dt = i2c_get_clientdata(client);
const struct gp2a_platform_data *pdata = dt->pdata;
- device_init_wakeup(&client->dev, false);
-
free_irq(client->irq, dt);
input_unregister_device(dt->input);
diff --git a/drivers/input/misc/gpio_decoder.c b/drivers/input/misc/gpio_decoder.c
index ca7e0bacb2d8..1dca526e6f1a 100644
--- a/drivers/input/misc/gpio_decoder.c
+++ b/drivers/input/misc/gpio_decoder.c
@@ -110,7 +110,6 @@ static int gpio_decoder_probe(struct platform_device *pdev)
dev_err(dev, "failed to register polled device\n");
return err;
}
- platform_set_drvdata(pdev, decoder);
return 0;
}
diff --git a/drivers/input/misc/gpio_tilt_polled.c b/drivers/input/misc/gpio_tilt_polled.c
index f103b99d1852..6e217a45e39a 100644
--- a/drivers/input/misc/gpio_tilt_polled.c
+++ b/drivers/input/misc/gpio_tilt_polled.c
@@ -138,7 +138,7 @@ static int gpio_tilt_polled_probe(struct platform_device *pdev)
input->name = pdev->name;
input->phys = DRV_NAME"/input0";
- input->dev.parent = &pdev->dev;
+ input->dev.parent = dev;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
diff --git a/drivers/input/misc/hisi_powerkey.c b/drivers/input/misc/hisi_powerkey.c
index 675539c529ce..dee6245f38d7 100644
--- a/drivers/input/misc/hisi_powerkey.c
+++ b/drivers/input/misc/hisi_powerkey.c
@@ -75,9 +75,9 @@ static int hi65xx_powerkey_probe(struct platform_device *pdev)
struct input_dev *input;
int irq, i, error;
- input = devm_input_allocate_device(&pdev->dev);
+ input = devm_input_allocate_device(dev);
if (!input) {
- dev_err(&pdev->dev, "failed to allocate input device\n");
+ dev_err(dev, "failed to allocate input device\n");
return -ENOMEM;
}
@@ -111,19 +111,11 @@ static int hi65xx_powerkey_probe(struct platform_device *pdev)
error = input_register_device(input);
if (error) {
- dev_err(&pdev->dev, "failed to register input device: %d\n",
- error);
+ dev_err(dev, "failed to register input device: %d\n", error);
return error;
}
- device_init_wakeup(&pdev->dev, 1);
-
- return 0;
-}
-
-static int hi65xx_powerkey_remove(struct platform_device *pdev)
-{
- device_init_wakeup(&pdev->dev, 0);
+ device_init_wakeup(dev, 1);
return 0;
}
@@ -133,7 +125,6 @@ static struct platform_driver hi65xx_powerkey_driver = {
.name = "hi65xx-powerkey",
},
.probe = hi65xx_powerkey_probe,
- .remove = hi65xx_powerkey_remove,
};
module_platform_driver(hi65xx_powerkey_driver);
diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c
index 19c73574458e..b60cdea73826 100644
--- a/drivers/input/misc/mma8450.c
+++ b/drivers/input/misc/mma8450.c
@@ -205,8 +205,6 @@ static int mma8450_probe(struct i2c_client *c,
return err;
}
- i2c_set_clientdata(c, m);
-
return 0;
}
diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c
deleted file mode 100644
index f088db31cfc7..000000000000
--- a/drivers/input/misc/mpu3050.c
+++ /dev/null
@@ -1,481 +0,0 @@
-/*
- * MPU3050 Tri-axis gyroscope driver
- *
- * Copyright (C) 2011 Wistron Co.Ltd
- * Joseph Lai <joseph_lai@wistron.com>
- *
- * Trimmed down by Alan Cox <alan@linux.intel.com> to produce this version
- *
- * This is a 'lite' version of the driver, while we consider the right way
- * to present the other features to user space. In particular it requires the
- * device has an IRQ, and it only provides an input interface, so is not much
- * use for device orientation. A fuller version is available from the Meego
- * tree.
- *
- * This program is based on bma023.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-
-#define MPU3050_CHIP_ID 0x69
-
-#define MPU3050_AUTO_DELAY 1000
-
-#define MPU3050_MIN_VALUE -32768
-#define MPU3050_MAX_VALUE 32767
-
-#define MPU3050_DEFAULT_POLL_INTERVAL 200
-#define MPU3050_DEFAULT_FS_RANGE 3
-
-/* Register map */
-#define MPU3050_CHIP_ID_REG 0x00
-#define MPU3050_SMPLRT_DIV 0x15
-#define MPU3050_DLPF_FS_SYNC 0x16
-#define MPU3050_INT_CFG 0x17
-#define MPU3050_XOUT_H 0x1D
-#define MPU3050_PWR_MGM 0x3E
-#define MPU3050_PWR_MGM_POS 6
-
-/* Register bits */
-
-/* DLPF_FS_SYNC */
-#define MPU3050_EXT_SYNC_NONE 0x00
-#define MPU3050_EXT_SYNC_TEMP 0x20
-#define MPU3050_EXT_SYNC_GYROX 0x40
-#define MPU3050_EXT_SYNC_GYROY 0x60
-#define MPU3050_EXT_SYNC_GYROZ 0x80
-#define MPU3050_EXT_SYNC_ACCELX 0xA0
-#define MPU3050_EXT_SYNC_ACCELY 0xC0
-#define MPU3050_EXT_SYNC_ACCELZ 0xE0
-#define MPU3050_EXT_SYNC_MASK 0xE0
-#define MPU3050_FS_250DPS 0x00
-#define MPU3050_FS_500DPS 0x08
-#define MPU3050_FS_1000DPS 0x10
-#define MPU3050_FS_2000DPS 0x18
-#define MPU3050_FS_MASK 0x18
-#define MPU3050_DLPF_CFG_256HZ_NOLPF2 0x00
-#define MPU3050_DLPF_CFG_188HZ 0x01
-#define MPU3050_DLPF_CFG_98HZ 0x02
-#define MPU3050_DLPF_CFG_42HZ 0x03
-#define MPU3050_DLPF_CFG_20HZ 0x04
-#define MPU3050_DLPF_CFG_10HZ 0x05
-#define MPU3050_DLPF_CFG_5HZ 0x06
-#define MPU3050_DLPF_CFG_2100HZ_NOLPF 0x07
-#define MPU3050_DLPF_CFG_MASK 0x07
-/* INT_CFG */
-#define MPU3050_RAW_RDY_EN 0x01
-#define MPU3050_MPU_RDY_EN 0x02
-#define MPU3050_LATCH_INT_EN 0x04
-/* PWR_MGM */
-#define MPU3050_PWR_MGM_PLL_X 0x01
-#define MPU3050_PWR_MGM_PLL_Y 0x02
-#define MPU3050_PWR_MGM_PLL_Z 0x03
-#define MPU3050_PWR_MGM_CLKSEL 0x07
-#define MPU3050_PWR_MGM_STBY_ZG 0x08
-#define MPU3050_PWR_MGM_STBY_YG 0x10
-#define MPU3050_PWR_MGM_STBY_XG 0x20
-#define MPU3050_PWR_MGM_SLEEP 0x40
-#define MPU3050_PWR_MGM_RESET 0x80
-#define MPU3050_PWR_MGM_MASK 0x40
-
-struct axis_data {
- s16 x;
- s16 y;
- s16 z;
-};
-
-struct mpu3050_sensor {
- struct i2c_client *client;
- struct device *dev;
- struct input_dev *idev;
-};
-
-/**
- * mpu3050_xyz_read_reg - read the axes values
- * @buffer: provide register addr and get register
- * @length: length of register
- *
- * Reads the register values in one transaction or returns a negative
- * error code on failure.
- */
-static int mpu3050_xyz_read_reg(struct i2c_client *client,
- u8 *buffer, int length)
-{
- /*
- * Annoying we can't make this const because the i2c layer doesn't
- * declare input buffers const.
- */
- char cmd = MPU3050_XOUT_H;
- struct i2c_msg msg[] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = 1,
- .buf = &cmd,
- },
- {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = length,
- .buf = buffer,
- },
- };
-
- return i2c_transfer(client->adapter, msg, 2);
-}
-
-/**
- * mpu3050_read_xyz - get co-ordinates from device
- * @client: i2c address of sensor
- * @coords: co-ordinates to update
- *
- * Return the converted X Y and Z co-ordinates from the sensor device
- */
-static void mpu3050_read_xyz(struct i2c_client *client,
- struct axis_data *coords)
-{
- u16 buffer[3];
-
- mpu3050_xyz_read_reg(client, (u8 *)buffer, 6);
- coords->x = be16_to_cpu(buffer[0]);
- coords->y = be16_to_cpu(buffer[1]);
- coords->z = be16_to_cpu(buffer[2]);
- dev_dbg(&client->dev, "%s: x %d, y %d, z %d\n", __func__,
- coords->x, coords->y, coords->z);
-}
-
-/**
- * mpu3050_set_power_mode - set the power mode
- * @client: i2c client for the sensor
- * @val: value to switch on/off of power, 1: normal power, 0: low power
- *
- * Put device to normal-power mode or low-power mode.
- */
-static void mpu3050_set_power_mode(struct i2c_client *client, u8 val)
-{
- u8 value;
-
- value = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM);
- value = (value & ~MPU3050_PWR_MGM_MASK) |
- (((val << MPU3050_PWR_MGM_POS) & MPU3050_PWR_MGM_MASK) ^
- MPU3050_PWR_MGM_MASK);
- i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, value);
-}
-
-/**
- * mpu3050_input_open - called on input event open
- * @input: input dev of opened device
- *
- * The input layer calls this function when input event is opened. The
- * function will push the device to resume. Then, the device is ready
- * to provide data.
- */
-static int mpu3050_input_open(struct input_dev *input)
-{
- struct mpu3050_sensor *sensor = input_get_drvdata(input);
- int error;
-
- pm_runtime_get(sensor->dev);
-
- /* Enable interrupts */
- error = i2c_smbus_write_byte_data(sensor->client, MPU3050_INT_CFG,
- MPU3050_LATCH_INT_EN |
- MPU3050_RAW_RDY_EN |
- MPU3050_MPU_RDY_EN);
- if (error < 0) {
- pm_runtime_put(sensor->dev);
- return error;
- }
-
- return 0;
-}
-
-/**
- * mpu3050_input_close - called on input event close
- * @input: input dev of closed device
- *
- * The input layer calls this function when input event is closed. The
- * function will push the device to suspend.
- */
-static void mpu3050_input_close(struct input_dev *input)
-{
- struct mpu3050_sensor *sensor = input_get_drvdata(input);
-
- pm_runtime_put(sensor->dev);
-}
-
-/**
- * mpu3050_interrupt_thread - handle an IRQ
- * @irq: interrupt numner
- * @data: the sensor
- *
- * Called by the kernel single threaded after an interrupt occurs. Read
- * the sensor data and generate an input event for it.
- */
-static irqreturn_t mpu3050_interrupt_thread(int irq, void *data)
-{
- struct mpu3050_sensor *sensor = data;
- struct axis_data axis;
-
- mpu3050_read_xyz(sensor->client, &axis);
-
- input_report_abs(sensor->idev, ABS_X, axis.x);
- input_report_abs(sensor->idev, ABS_Y, axis.y);
- input_report_abs(sensor->idev, ABS_Z, axis.z);
- input_sync(sensor->idev);
-
- return IRQ_HANDLED;
-}
-
-/**
- * mpu3050_hw_init - initialize hardware
- * @sensor: the sensor
- *
- * Called during device probe; configures the sampling method.
- */
-static int mpu3050_hw_init(struct mpu3050_sensor *sensor)
-{
- struct i2c_client *client = sensor->client;
- int ret;
- u8 reg;
-
- /* Reset */
- ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM,
- MPU3050_PWR_MGM_RESET);
- if (ret < 0)
- return ret;
-
- ret = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM);
- if (ret < 0)
- return ret;
-
- ret &= ~MPU3050_PWR_MGM_CLKSEL;
- ret |= MPU3050_PWR_MGM_PLL_Z;
- ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, ret);
- if (ret < 0)
- return ret;
-
- /* Output frequency divider. The poll interval */
- ret = i2c_smbus_write_byte_data(client, MPU3050_SMPLRT_DIV,
- MPU3050_DEFAULT_POLL_INTERVAL - 1);
- if (ret < 0)
- return ret;
-
- /* Set low pass filter and full scale */
- reg = MPU3050_DEFAULT_FS_RANGE;
- reg |= MPU3050_DLPF_CFG_42HZ << 3;
- reg |= MPU3050_EXT_SYNC_NONE << 5;
- ret = i2c_smbus_write_byte_data(client, MPU3050_DLPF_FS_SYNC, reg);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-/**
- * mpu3050_probe - device detection callback
- * @client: i2c client of found device
- * @id: id match information
- *
- * The I2C layer calls us when it believes a sensor is present at this
- * address. Probe to see if this is correct and to validate the device.
- *
- * If present install the relevant sysfs interfaces and input device.
- */
-static int mpu3050_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct mpu3050_sensor *sensor;
- struct input_dev *idev;
- int ret;
- int error;
-
- sensor = kzalloc(sizeof(struct mpu3050_sensor), GFP_KERNEL);
- idev = input_allocate_device();
- if (!sensor || !idev) {
- dev_err(&client->dev, "failed to allocate driver data\n");
- error = -ENOMEM;
- goto err_free_mem;
- }
-
- sensor->client = client;
- sensor->dev = &client->dev;
- sensor->idev = idev;
-
- mpu3050_set_power_mode(client, 1);
- msleep(10);
-
- ret = i2c_smbus_read_byte_data(client, MPU3050_CHIP_ID_REG);
- if (ret < 0) {
- dev_err(&client->dev, "failed to detect device\n");
- error = -ENXIO;
- goto err_free_mem;
- }
-
- if (ret != MPU3050_CHIP_ID) {
- dev_err(&client->dev, "unsupported chip id\n");
- error = -ENXIO;
- goto err_free_mem;
- }
-
- idev->name = "MPU3050";
- idev->id.bustype = BUS_I2C;
- idev->dev.parent = &client->dev;
-
- idev->open = mpu3050_input_open;
- idev->close = mpu3050_input_close;
-
- __set_bit(EV_ABS, idev->evbit);
- input_set_abs_params(idev, ABS_X,
- MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
- input_set_abs_params(idev, ABS_Y,
- MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
- input_set_abs_params(idev, ABS_Z,
- MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
-
- input_set_drvdata(idev, sensor);
-
- pm_runtime_set_active(&client->dev);
-
- error = mpu3050_hw_init(sensor);
- if (error)
- goto err_pm_set_suspended;
-
- error = request_threaded_irq(client->irq,
- NULL, mpu3050_interrupt_thread,
- IRQF_TRIGGER_RISING | IRQF_ONESHOT,
- "mpu3050", sensor);
- if (error) {
- dev_err(&client->dev,
- "can't get IRQ %d, error %d\n", client->irq, error);
- goto err_pm_set_suspended;
- }
-
- error = input_register_device(idev);
- if (error) {
- dev_err(&client->dev, "failed to register input device\n");
- goto err_free_irq;
- }
-
- pm_runtime_enable(&client->dev);
- pm_runtime_set_autosuspend_delay(&client->dev, MPU3050_AUTO_DELAY);
- i2c_set_clientdata(client, sensor);
-
- return 0;
-
-err_free_irq:
- free_irq(client->irq, sensor);
-err_pm_set_suspended:
- pm_runtime_set_suspended(&client->dev);
-err_free_mem:
- input_free_device(idev);
- kfree(sensor);
- return error;
-}
-
-/**
- * mpu3050_remove - remove a sensor
- * @client: i2c client of sensor being removed
- *
- * Our sensor is going away, clean up the resources.
- */
-static int mpu3050_remove(struct i2c_client *client)
-{
- struct mpu3050_sensor *sensor = i2c_get_clientdata(client);
-
- pm_runtime_disable(&client->dev);
- pm_runtime_set_suspended(&client->dev);
-
- free_irq(client->irq, sensor);
- input_unregister_device(sensor->idev);
- kfree(sensor);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-/**
- * mpu3050_suspend - called on device suspend
- * @dev: device being suspended
- *
- * Put the device into sleep mode before we suspend the machine.
- */
-static int mpu3050_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- mpu3050_set_power_mode(client, 0);
-
- return 0;
-}
-
-/**
- * mpu3050_resume - called on device resume
- * @dev: device being resumed
- *
- * Put the device into powered mode on resume.
- */
-static int mpu3050_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- mpu3050_set_power_mode(client, 1);
- msleep(100); /* wait for gyro chip resume */
-
- return 0;
-}
-#endif
-
-static UNIVERSAL_DEV_PM_OPS(mpu3050_pm, mpu3050_suspend, mpu3050_resume, NULL);
-
-static const struct i2c_device_id mpu3050_ids[] = {
- { "mpu3050", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, mpu3050_ids);
-
-static const struct of_device_id mpu3050_of_match[] = {
- { .compatible = "invn,mpu3050", },
- { },
-};
-MODULE_DEVICE_TABLE(of, mpu3050_of_match);
-
-static struct i2c_driver mpu3050_i2c_driver = {
- .driver = {
- .name = "mpu3050",
- .pm = &mpu3050_pm,
- .of_match_table = mpu3050_of_match,
- },
- .probe = mpu3050_probe,
- .remove = mpu3050_remove,
- .id_table = mpu3050_ids,
-};
-
-module_i2c_driver(mpu3050_i2c_driver);
-
-MODULE_AUTHOR("Wistron Corp.");
-MODULE_DESCRIPTION("MPU3050 Tri-axis gyroscope driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index e317b75357a0..18ad956454f1 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -266,7 +266,6 @@ static int pm8941_pwrkey_remove(struct platform_device *pdev)
{
struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
- device_init_wakeup(&pdev->dev, 0);
unregister_reboot_notifier(&pwrkey->reboot_notifier);
return 0;
diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index 67aab86048ad..73323b0c72c1 100644
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -438,13 +438,6 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
return 0;
}
-static int pmic8xxx_pwrkey_remove(struct platform_device *pdev)
-{
- device_init_wakeup(&pdev->dev, 0);
-
- return 0;
-}
-
static const struct of_device_id pm8xxx_pwr_key_id_table[] = {
{ .compatible = "qcom,pm8058-pwrkey", .data = &pm8058_pwrkey_shutdown },
{ .compatible = "qcom,pm8921-pwrkey", .data = &pm8921_pwrkey_shutdown },
@@ -454,7 +447,6 @@ MODULE_DEVICE_TABLE(of, pm8xxx_pwr_key_id_table);
static struct platform_driver pmic8xxx_pwrkey_driver = {
.probe = pmic8xxx_pwrkey_probe,
- .remove = pmic8xxx_pwrkey_remove,
.shutdown = pmic8xxx_pwrkey_shutdown,
.driver = {
.name = "pm8xxx-pwrkey",
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index 5f9655d49a65..e53801dbd560 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -14,6 +14,7 @@
*/
#include <linux/input.h>
+#include <linux/regulator/consumer.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/of.h>
@@ -25,29 +26,62 @@
struct pwm_beeper {
struct input_dev *input;
struct pwm_device *pwm;
+ struct regulator *amplifier;
struct work_struct work;
unsigned long period;
+ bool suspended;
+ bool amplifier_on;
};
#define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
-static void __pwm_beeper_set(struct pwm_beeper *beeper)
+static int pwm_beeper_on(struct pwm_beeper *beeper, unsigned long period)
{
- unsigned long period = beeper->period;
+ struct pwm_state state;
+ int error;
+
+ pwm_get_state(beeper->pwm, &state);
+
+ state.enabled = true;
+ state.period = period;
+ pwm_set_relative_duty_cycle(&state, 50, 100);
+
+ error = pwm_apply_state(beeper->pwm, &state);
+ if (error)
+ return error;
+
+ if (!beeper->amplifier_on) {
+ error = regulator_enable(beeper->amplifier);
+ if (error) {
+ pwm_disable(beeper->pwm);
+ return error;
+ }
+
+ beeper->amplifier_on = true;
+ }
+
+ return 0;
+}
- if (period) {
- pwm_config(beeper->pwm, period / 2, period);
- pwm_enable(beeper->pwm);
- } else
- pwm_disable(beeper->pwm);
+static void pwm_beeper_off(struct pwm_beeper *beeper)
+{
+ if (beeper->amplifier_on) {
+ regulator_disable(beeper->amplifier);
+ beeper->amplifier_on = false;
+ }
+
+ pwm_disable(beeper->pwm);
}
static void pwm_beeper_work(struct work_struct *work)
{
- struct pwm_beeper *beeper =
- container_of(work, struct pwm_beeper, work);
+ struct pwm_beeper *beeper = container_of(work, struct pwm_beeper, work);
+ unsigned long period = READ_ONCE(beeper->period);
- __pwm_beeper_set(beeper);
+ if (period)
+ pwm_beeper_on(beeper, period);
+ else
+ pwm_beeper_off(beeper);
}
static int pwm_beeper_event(struct input_dev *input,
@@ -73,7 +107,8 @@ static int pwm_beeper_event(struct input_dev *input,
else
beeper->period = HZ_TO_NANOSECONDS(value);
- schedule_work(&beeper->work);
+ if (!beeper->suspended)
+ schedule_work(&beeper->work);
return 0;
}
@@ -81,9 +116,7 @@ static int pwm_beeper_event(struct input_dev *input,
static void pwm_beeper_stop(struct pwm_beeper *beeper)
{
cancel_work_sync(&beeper->work);
-
- if (beeper->period)
- pwm_disable(beeper->pwm);
+ pwm_beeper_off(beeper);
}
static void pwm_beeper_close(struct input_dev *input)
@@ -95,41 +128,50 @@ static void pwm_beeper_close(struct input_dev *input)
static int pwm_beeper_probe(struct platform_device *pdev)
{
- unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
+ struct device *dev = &pdev->dev;
struct pwm_beeper *beeper;
+ struct pwm_state state;
int error;
- beeper = kzalloc(sizeof(*beeper), GFP_KERNEL);
+ beeper = devm_kzalloc(dev, sizeof(*beeper), GFP_KERNEL);
if (!beeper)
return -ENOMEM;
- beeper->pwm = pwm_get(&pdev->dev, NULL);
+ beeper->pwm = devm_pwm_get(dev, NULL);
if (IS_ERR(beeper->pwm)) {
- dev_dbg(&pdev->dev, "unable to request PWM, trying legacy API\n");
- beeper->pwm = pwm_request(pwm_id, "pwm beeper");
+ error = PTR_ERR(beeper->pwm);
+ if (error != -EPROBE_DEFER)
+ dev_err(dev, "Failed to request PWM device: %d\n",
+ error);
+ return error;
}
- if (IS_ERR(beeper->pwm)) {
- error = PTR_ERR(beeper->pwm);
- dev_err(&pdev->dev, "Failed to request pwm device: %d\n", error);
- goto err_free;
+ /* Sync up PWM state and ensure it is off. */
+ pwm_init_state(beeper->pwm, &state);
+ state.enabled = false;
+ error = pwm_apply_state(beeper->pwm, &state);
+ if (error) {
+ dev_err(dev, "failed to apply initial PWM state: %d\n",
+ error);
+ return error;
}
- /*
- * FIXME: pwm_apply_args() should be removed when switching to
- * the atomic PWM API.
- */
- pwm_apply_args(beeper->pwm);
+ beeper->amplifier = devm_regulator_get(dev, "amp");
+ if (IS_ERR(beeper->amplifier)) {
+ error = PTR_ERR(beeper->amplifier);
+ if (error != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get 'amp' regulator: %d\n",
+ error);
+ return error;
+ }
INIT_WORK(&beeper->work, pwm_beeper_work);
- beeper->input = input_allocate_device();
+ beeper->input = devm_input_allocate_device(dev);
if (!beeper->input) {
- dev_err(&pdev->dev, "Failed to allocate input device\n");
- error = -ENOMEM;
- goto err_pwm_free;
+ dev_err(dev, "Failed to allocate input device\n");
+ return -ENOMEM;
}
- beeper->input->dev.parent = &pdev->dev;
beeper->input->name = "pwm-beeper";
beeper->input->phys = "pwm/input0";
@@ -138,8 +180,8 @@ static int pwm_beeper_probe(struct platform_device *pdev)
beeper->input->id.product = 0x0001;
beeper->input->id.version = 0x0100;
- beeper->input->evbit[0] = BIT(EV_SND);
- beeper->input->sndbit[0] = BIT(SND_TONE) | BIT(SND_BELL);
+ input_set_capability(beeper->input, EV_SND, SND_TONE);
+ input_set_capability(beeper->input, EV_SND, SND_BELL);
beeper->input->event = pwm_beeper_event;
beeper->input->close = pwm_beeper_close;
@@ -148,41 +190,28 @@ static int pwm_beeper_probe(struct platform_device *pdev)
error = input_register_device(beeper->input);
if (error) {
- dev_err(&pdev->dev, "Failed to register input device: %d\n", error);
- goto err_input_free;
+ dev_err(dev, "Failed to register input device: %d\n", error);
+ return error;
}
platform_set_drvdata(pdev, beeper);
return 0;
-
-err_input_free:
- input_free_device(beeper->input);
-err_pwm_free:
- pwm_free(beeper->pwm);
-err_free:
- kfree(beeper);
-
- return error;
-}
-
-static int pwm_beeper_remove(struct platform_device *pdev)
-{
- struct pwm_beeper *beeper = platform_get_drvdata(pdev);
-
- input_unregister_device(beeper->input);
-
- pwm_free(beeper->pwm);
-
- kfree(beeper);
-
- return 0;
}
static int __maybe_unused pwm_beeper_suspend(struct device *dev)
{
struct pwm_beeper *beeper = dev_get_drvdata(dev);
+ /*
+ * Spinlock is taken here is not to protect write to
+ * beeper->suspended, but to ensure that pwm_beeper_event
+ * does not re-submit work once flag is set.
+ */
+ spin_lock_irq(&beeper->input->event_lock);
+ beeper->suspended = true;
+ spin_unlock_irq(&beeper->input->event_lock);
+
pwm_beeper_stop(beeper);
return 0;
@@ -192,8 +221,12 @@ static int __maybe_unused pwm_beeper_resume(struct device *dev)
{
struct pwm_beeper *beeper = dev_get_drvdata(dev);
- if (beeper->period)
- __pwm_beeper_set(beeper);
+ spin_lock_irq(&beeper->input->event_lock);
+ beeper->suspended = false;
+ spin_unlock_irq(&beeper->input->event_lock);
+
+ /* Let worker figure out if we should resume beeping */
+ schedule_work(&beeper->work);
return 0;
}
@@ -211,7 +244,6 @@ MODULE_DEVICE_TABLE(of, pwm_beeper_match);
static struct platform_driver pwm_beeper_driver = {
.probe = pwm_beeper_probe,
- .remove = pwm_beeper_remove,
.driver = {
.name = "pwm-beeper",
.pm = &pwm_beeper_pm_ops,
diff --git a/drivers/input/misc/retu-pwrbutton.c b/drivers/input/misc/retu-pwrbutton.c
index 30b459b6b344..64023ac08e2b 100644
--- a/drivers/input/misc/retu-pwrbutton.c
+++ b/drivers/input/misc/retu-pwrbutton.c
@@ -76,14 +76,8 @@ static int retu_pwrbutton_probe(struct platform_device *pdev)
return 0;
}
-static int retu_pwrbutton_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
static struct platform_driver retu_pwrbutton_driver = {
.probe = retu_pwrbutton_probe,
- .remove = retu_pwrbutton_remove,
.driver = {
.name = "retu-pwrbutton",
},
diff --git a/drivers/input/misc/sirfsoc-onkey.c b/drivers/input/misc/sirfsoc-onkey.c
index ed7237f19539..4fd038d476a3 100644
--- a/drivers/input/misc/sirfsoc-onkey.c
+++ b/drivers/input/misc/sirfsoc-onkey.c
@@ -172,13 +172,6 @@ static int sirfsoc_pwrc_probe(struct platform_device *pdev)
return 0;
}
-static int sirfsoc_pwrc_remove(struct platform_device *pdev)
-{
- device_init_wakeup(&pdev->dev, 0);
-
- return 0;
-}
-
static int __maybe_unused sirfsoc_pwrc_resume(struct device *dev)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_get_drvdata(dev);
@@ -200,7 +193,6 @@ static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, sirfsoc_pwrc_resume);
static struct platform_driver sirfsoc_pwrc_driver = {
.probe = sirfsoc_pwrc_probe,
- .remove = sirfsoc_pwrc_remove,
.driver = {
.name = "sirfsoc-pwrc",
.pm = &sirfsoc_pwrc_pm_ops,
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index 908b51089dee..ddb2f22fca7a 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -102,6 +102,8 @@ soc_button_device_create(struct platform_device *pdev,
gpio_keys[n_buttons].active_low = 1;
gpio_keys[n_buttons].desc = info->name;
gpio_keys[n_buttons].wakeup = info->wakeup;
+ /* These devices often use cheap buttons, use 50 ms debounce */
+ gpio_keys[n_buttons].debounce_interval = 50;
n_buttons++;
}
@@ -167,12 +169,12 @@ static int soc_button_probe(struct platform_device *pdev)
button_info = (struct soc_button_info *)id->driver_data;
- if (gpiod_count(&pdev->dev, KBUILD_MODNAME) <= 0) {
- dev_dbg(&pdev->dev, "no GPIO attached, ignoring...\n");
+ if (gpiod_count(dev, KBUILD_MODNAME) <= 0) {
+ dev_dbg(dev, "no GPIO attached, ignoring...\n");
return -ENODEV;
}
- priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
diff --git a/drivers/input/misc/tps65218-pwrbutton.c b/drivers/input/misc/tps65218-pwrbutton.c
index cc74a41bdb0d..a4455bb12ae0 100644
--- a/drivers/input/misc/tps65218-pwrbutton.c
+++ b/drivers/input/misc/tps65218-pwrbutton.c
@@ -95,7 +95,7 @@ static int tps6521x_pb_probe(struct platform_device *pdev)
int error;
int irq;
- match = of_match_node(of_tps6521x_pb_match, pdev->dev.of_node);
+ match = of_match_node(of_tps6521x_pb_match, dev->of_node);
if (!match)
return -ENXIO;
@@ -118,10 +118,9 @@ static int tps6521x_pb_probe(struct platform_device *pdev)
input_set_capability(idev, EV_KEY, KEY_POWER);
- pwr->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ pwr->regmap = dev_get_regmap(dev->parent, NULL);
pwr->dev = dev;
pwr->idev = idev;
- platform_set_drvdata(pdev, pwr);
device_init_wakeup(dev, true);
irq = platform_get_irq(pdev, 0);
@@ -136,8 +135,7 @@ static int tps6521x_pb_probe(struct platform_device *pdev)
IRQF_ONESHOT,
pwr->data->name, pwr);
if (error) {
- dev_err(dev, "failed to request IRQ #%d: %d\n",
- irq, error);
+ dev_err(dev, "failed to request IRQ #%d: %d\n", irq, error);
return error;
}
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index 603fc2fadf05..54162d2cbcfc 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -85,7 +85,6 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
return err;
}
- platform_set_drvdata(pdev, pwr);
device_init_wakeup(&pdev->dev, true);
return 0;
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 328edc8c8786..72b28ebfe360 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -1855,7 +1855,7 @@ static int alps_absolute_mode_v1_v2(struct psmouse *psmouse)
* Switch mouse to poll (remote) mode so motion data will not
* get in our way
*/
- return ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETPOLL);
+ return ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL);
}
static int alps_monitor_mode_send_word(struct psmouse *psmouse, u16 word)
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 30e3442518f8..d0122134f320 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -665,7 +665,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
char *data;
/* Type 3 does not require a mode switch */
- if (dev->cfg.tp_type == TYPE3)
+ if (c->tp_type == TYPE3)
return 0;
data = kmalloc(c->um_size, GFP_KERNEL);
diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
index dc2394292088..fd8865c65caf 100644
--- a/drivers/input/mouse/cyapa.c
+++ b/drivers/input/mouse/cyapa.c
@@ -832,8 +832,8 @@ static int cyapa_prepare_wakeup_controls(struct cyapa *cyapa)
int error;
if (device_can_wakeup(dev)) {
- error = sysfs_merge_group(&client->dev.kobj,
- &cyapa_power_wakeup_group);
+ error = sysfs_merge_group(&dev->kobj,
+ &cyapa_power_wakeup_group);
if (error) {
dev_err(dev, "failed to add power wakeup group: %d\n",
error);
@@ -1312,7 +1312,7 @@ static int cyapa_probe(struct i2c_client *client,
return error;
}
- error = sysfs_create_group(&client->dev.kobj, &cyapa_sysfs_group);
+ error = sysfs_create_group(&dev->kobj, &cyapa_sysfs_group);
if (error) {
dev_err(dev, "failed to create sysfs entries: %d\n", error);
return error;
diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c
index f9600753eca5..1cbfa4a6e830 100644
--- a/drivers/input/mouse/cyapa_gen3.c
+++ b/drivers/input/mouse/cyapa_gen3.c
@@ -562,7 +562,7 @@ static int cyapa_gen3_bl_exit(struct cyapa *cyapa)
* Wait for bootloader to exit, and operation mode to start.
* Normally, this takes at least 50 ms.
*/
- usleep_range(50000, 100000);
+ msleep(50);
/*
* In addition, when a device boots for the first time after being
* updated to new firmware, it must first calibrate its sensors, which
@@ -789,7 +789,7 @@ static ssize_t cyapa_gen3_do_calibrate(struct device *dev,
const char *buf, size_t count)
{
struct cyapa *cyapa = dev_get_drvdata(dev);
- int tries;
+ unsigned long timeout;
int ret;
ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
@@ -812,31 +812,28 @@ static ssize_t cyapa_gen3_do_calibrate(struct device *dev,
goto out;
}
- tries = 20; /* max recalibration timeout 2s. */
+ /* max recalibration timeout 2s. */
+ timeout = jiffies + 2 * HZ;
do {
/*
* For this recalibration, the max time will not exceed 2s.
* The average time is approximately 500 - 700 ms, and we
* will check the status every 100 - 200ms.
*/
- usleep_range(100000, 200000);
-
+ msleep(100);
ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
if (ret < 0) {
- dev_err(dev, "Error reading dev status: %d\n",
- ret);
+ dev_err(dev, "Error reading dev status: %d\n", ret);
goto out;
}
- if ((ret & CYAPA_DEV_NORMAL) == CYAPA_DEV_NORMAL)
- break;
- } while (--tries);
+ if ((ret & CYAPA_DEV_NORMAL) == CYAPA_DEV_NORMAL) {
+ dev_dbg(dev, "Calibration successful.\n");
+ goto out;
+ }
+ } while (time_is_after_jiffies(timeout));
- if (tries == 0) {
- dev_err(dev, "Failed to calibrate. Timeout.\n");
- ret = -ETIMEDOUT;
- goto out;
- }
- dev_dbg(dev, "Calibration successful.\n");
+ dev_err(dev, "Failed to calibrate. Timeout.\n");
+ ret = -ETIMEDOUT;
out:
return ret < 0 ? ret : count;
diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c
index 28dcfc822bf6..21bad3e75fee 100644
--- a/drivers/input/mouse/cypress_ps2.c
+++ b/drivers/input/mouse/cypress_ps2.c
@@ -107,7 +107,7 @@ static int cypress_ps2_read_cmd_status(struct psmouse *psmouse,
enum psmouse_state old_state;
int pktsize;
- ps2_begin_command(&psmouse->ps2dev);
+ ps2_begin_command(ps2dev);
old_state = psmouse->state;
psmouse->state = PSMOUSE_CMD_MODE;
@@ -133,7 +133,7 @@ out:
psmouse->state = old_state;
psmouse->pktcnt = 0;
- ps2_end_command(&psmouse->ps2dev);
+ ps2_end_command(ps2dev);
return rc;
}
@@ -414,8 +414,6 @@ static int cypress_set_input_params(struct input_dev *input,
__set_bit(BTN_RIGHT, input->keybit);
__set_bit(BTN_MIDDLE, input->keybit);
- input_set_drvdata(input, cytp);
-
return 0;
}
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index 1e1d0ad406f2..352050e9031d 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1041,8 +1041,7 @@ static int elan_probe(struct i2c_client *client,
return -EIO;
}
- data = devm_kzalloc(&client->dev, sizeof(struct elan_tp_data),
- GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(struct elan_tp_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -1053,29 +1052,25 @@ static int elan_probe(struct i2c_client *client,
init_completion(&data->fw_completion);
mutex_init(&data->sysfs_mutex);
- data->vcc = devm_regulator_get(&client->dev, "vcc");
+ data->vcc = devm_regulator_get(dev, "vcc");
if (IS_ERR(data->vcc)) {
error = PTR_ERR(data->vcc);
if (error != -EPROBE_DEFER)
- dev_err(&client->dev,
- "Failed to get 'vcc' regulator: %d\n",
+ dev_err(dev, "Failed to get 'vcc' regulator: %d\n",
error);
return error;
}
error = regulator_enable(data->vcc);
if (error) {
- dev_err(&client->dev,
- "Failed to enable regulator: %d\n", error);
+ dev_err(dev, "Failed to enable regulator: %d\n", error);
return error;
}
- error = devm_add_action(&client->dev,
- elan_disable_regulator, data);
+ error = devm_add_action(dev, elan_disable_regulator, data);
if (error) {
regulator_disable(data->vcc);
- dev_err(&client->dev,
- "Failed to add disable regulator action: %d\n",
+ dev_err(dev, "Failed to add disable regulator action: %d\n",
error);
return error;
}
@@ -1093,14 +1088,14 @@ static int elan_probe(struct i2c_client *client,
if (error)
return error;
- dev_info(&client->dev,
+ dev_info(dev,
"Elan Touchpad: Module ID: 0x%04x, Firmware: 0x%04x, Sample: 0x%04x, IAP: 0x%04x\n",
data->product_id,
data->fw_version,
data->sm_version,
data->iap_version);
- dev_dbg(&client->dev,
+ dev_dbg(dev,
"Elan Touchpad Extra Information:\n"
" Max ABS X,Y: %d,%d\n"
" Width X,Y: %d,%d\n"
@@ -1118,38 +1113,33 @@ static int elan_probe(struct i2c_client *client,
* Systems using device tree should set up interrupt via DTS,
* the rest will use the default falling edge interrupts.
*/
- irqflags = client->dev.of_node ? 0 : IRQF_TRIGGER_FALLING;
+ irqflags = dev->of_node ? 0 : IRQF_TRIGGER_FALLING;
- error = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, elan_isr,
+ error = devm_request_threaded_irq(dev, client->irq, NULL, elan_isr,
irqflags | IRQF_ONESHOT,
client->name, data);
if (error) {
- dev_err(&client->dev, "cannot register irq=%d\n", client->irq);
+ dev_err(dev, "cannot register irq=%d\n", client->irq);
return error;
}
- error = sysfs_create_groups(&client->dev.kobj, elan_sysfs_groups);
+ error = sysfs_create_groups(&dev->kobj, elan_sysfs_groups);
if (error) {
- dev_err(&client->dev, "failed to create sysfs attributes: %d\n",
- error);
+ dev_err(dev, "failed to create sysfs attributes: %d\n", error);
return error;
}
- error = devm_add_action(&client->dev,
- elan_remove_sysfs_groups, data);
+ error = devm_add_action(dev, elan_remove_sysfs_groups, data);
if (error) {
elan_remove_sysfs_groups(data);
- dev_err(&client->dev,
- "Failed to add sysfs cleanup action: %d\n",
+ dev_err(dev, "Failed to add sysfs cleanup action: %d\n",
error);
return error;
}
error = input_register_device(data->input);
if (error) {
- dev_err(&client->dev, "failed to register input device: %d\n",
- error);
+ dev_err(dev, "failed to register input device: %d\n", error);
return error;
}
@@ -1157,8 +1147,8 @@ static int elan_probe(struct i2c_client *client,
* Systems using device tree should set up wakeup via DTS,
* the rest will configure device as wakeup source by default.
*/
- if (!client->dev.of_node)
- device_init_wakeup(&client->dev, true);
+ if (!dev->of_node)
+ device_init_wakeup(dev, true);
return 0;
}
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index db7d1d666ac1..efc8ec342351 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1412,7 +1412,7 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[3];
- ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index 62be888e83d0..015509e0b140 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -713,8 +713,7 @@ static int hgpk_toggle_powersave(struct psmouse *psmouse, int enable)
* the upper bound. (in practice, it takes about 3 loops.)
*/
for (timeo = 20; timeo > 0; timeo--) {
- if (!ps2_sendbyte(&psmouse->ps2dev,
- PSMOUSE_CMD_DISABLE, 20))
+ if (!ps2_sendbyte(ps2dev, PSMOUSE_CMD_DISABLE, 20))
break;
msleep(25);
}
@@ -740,7 +739,7 @@ static int hgpk_toggle_powersave(struct psmouse *psmouse, int enable)
psmouse_set_state(psmouse, PSMOUSE_IGNORE);
/* probably won't see an ACK, the touchpad will be off */
- ps2_sendbyte(&psmouse->ps2dev, 0xec, 20);
+ ps2_sendbyte(ps2dev, 0xec, 20);
}
return 0;
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 422da1cd9e76..ef9c97f5e3d7 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -402,7 +402,7 @@ int ps2pp_detect(struct psmouse *psmouse, bool set_properties)
psmouse->set_resolution = ps2pp_set_resolution;
psmouse->disconnect = ps2pp_disconnect;
- error = device_create_file(&psmouse->ps2dev.serio->dev,
+ error = device_create_file(&ps2dev->serio->dev,
&psmouse_attr_smartscroll.dattr);
if (error) {
psmouse_err(psmouse,
diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c
index 0a60717b91c6..25f0ecb90126 100644
--- a/drivers/input/mouse/maplemouse.c
+++ b/drivers/input/mouse/maplemouse.c
@@ -87,7 +87,6 @@ static int probe_maple_mouse(struct device *dev)
mse->dev = input_dev;
mse->mdev = mdev;
- input_set_drvdata(input_dev, mse);
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index bee267424972..a598b7223cef 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -127,6 +127,13 @@ struct psmouse_protocol {
int (*init)(struct psmouse *);
};
+static void psmouse_report_standard_buttons(struct input_dev *dev, u8 buttons)
+{
+ input_report_key(dev, BTN_LEFT, buttons & BIT(0));
+ input_report_key(dev, BTN_MIDDLE, buttons & BIT(2));
+ input_report_key(dev, BTN_RIGHT, buttons & BIT(1));
+}
+
/*
* psmouse_process_byte() analyzes the PS/2 data stream and reports
* relevant events to the input module once full packet has arrived.
@@ -199,9 +206,8 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse)
}
/* Generic PS/2 Mouse */
- input_report_key(dev, BTN_LEFT, packet[0] & 1);
- input_report_key(dev, BTN_MIDDLE, (packet[0] >> 2) & 1);
- input_report_key(dev, BTN_RIGHT, (packet[0] >> 1) & 1);
+ psmouse_report_standard_buttons(dev,
+ packet[0] | psmouse->extra_buttons);
input_report_rel(dev, REL_X, packet[1] ? (int) packet[1] - (int) ((packet[0] << 4) & 0x100) : 0);
input_report_rel(dev, REL_Y, packet[2] ? (int) ((packet[0] << 3) & 0x100) - (int) packet[2] : 0);
@@ -282,6 +288,30 @@ static int psmouse_handle_byte(struct psmouse *psmouse)
return 0;
}
+static void psmouse_handle_oob_data(struct psmouse *psmouse, u8 data)
+{
+ switch (psmouse->oob_data_type) {
+ case PSMOUSE_OOB_NONE:
+ psmouse->oob_data_type = data;
+ break;
+
+ case PSMOUSE_OOB_EXTRA_BTNS:
+ psmouse_report_standard_buttons(psmouse->dev, data);
+ input_sync(psmouse->dev);
+
+ psmouse->extra_buttons = data;
+ psmouse->oob_data_type = PSMOUSE_OOB_NONE;
+ break;
+
+ default:
+ psmouse_warn(psmouse,
+ "unknown OOB_DATA type: 0x%02x\n",
+ psmouse->oob_data_type);
+ psmouse->oob_data_type = PSMOUSE_OOB_NONE;
+ break;
+ }
+}
+
/*
* psmouse_interrupt() handles incoming characters, either passing them
* for normal processing or gathering them as command response.
@@ -306,6 +336,11 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
goto out;
}
+ if (flags & SERIO_OOB_DATA) {
+ psmouse_handle_oob_data(psmouse, data);
+ goto out;
+ }
+
if (unlikely(psmouse->ps2dev.flags & PS2_FLAG_ACK))
if (ps2_handle_ack(&psmouse->ps2dev, data))
goto out;
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index e0ca6cda3d16..8c83b8e2505c 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -1,6 +1,9 @@
#ifndef _PSMOUSE_H
#define _PSMOUSE_H
+#define PSMOUSE_OOB_NONE 0x00
+#define PSMOUSE_OOB_EXTRA_BTNS 0x01
+
#define PSMOUSE_CMD_SETSCALE11 0x00e6
#define PSMOUSE_CMD_SETSCALE21 0x00e7
#define PSMOUSE_CMD_SETRES 0x10e8
@@ -53,6 +56,8 @@ struct psmouse {
unsigned char pktcnt;
unsigned char pktsize;
unsigned char type;
+ unsigned char oob_data_type;
+ unsigned char extra_buttons;
bool ignore_parity;
bool acks_disable_command;
unsigned int model;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index a41d8328c064..597ee4b01d9f 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -597,15 +597,13 @@ static int synaptics_is_pt_packet(unsigned char *buf)
return (buf[0] & 0xFC) == 0x84 && (buf[3] & 0xCC) == 0xC4;
}
-static void synaptics_pass_pt_packet(struct psmouse *psmouse,
- struct serio *ptport,
+static void synaptics_pass_pt_packet(struct serio *ptport,
unsigned char *packet)
{
- struct synaptics_data *priv = psmouse->private;
struct psmouse *child = serio_get_drvdata(ptport);
if (child && child->state == PSMOUSE_ACTIVATED) {
- serio_interrupt(ptport, packet[1] | priv->pt_buttons, 0);
+ serio_interrupt(ptport, packet[1], 0);
serio_interrupt(ptport, packet[4], 0);
serio_interrupt(ptport, packet[5], 0);
if (child->pktsize == 4)
@@ -856,7 +854,6 @@ static void synaptics_report_ext_buttons(struct psmouse *psmouse,
struct input_dev *dev = psmouse->dev;
struct synaptics_data *priv = psmouse->private;
int ext_bits = (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) + 1) >> 1;
- char buf[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
int i;
if (!SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap))
@@ -883,15 +880,18 @@ static void synaptics_report_ext_buttons(struct psmouse *psmouse,
* physically wired to the touchpad. Re-route them through
* the pass-through interface.
*/
- if (!priv->pt_port)
- return;
+ if (priv->pt_port) {
+ u8 pt_buttons;
- /* The trackstick expects at most 3 buttons */
- priv->pt_buttons = SYN_CAP_EXT_BUTTON_STICK_L(hw->ext_buttons) |
- SYN_CAP_EXT_BUTTON_STICK_R(hw->ext_buttons) << 1 |
- SYN_CAP_EXT_BUTTON_STICK_M(hw->ext_buttons) << 2;
+ /* The trackstick expects at most 3 buttons */
+ pt_buttons = SYN_CAP_EXT_BUTTON_STICK_L(hw->ext_buttons) |
+ SYN_CAP_EXT_BUTTON_STICK_R(hw->ext_buttons) << 1 |
+ SYN_CAP_EXT_BUTTON_STICK_M(hw->ext_buttons) << 2;
- synaptics_pass_pt_packet(psmouse, priv->pt_port, buf);
+ serio_interrupt(priv->pt_port,
+ PSMOUSE_OOB_EXTRA_BTNS, SERIO_OOB_DATA);
+ serio_interrupt(priv->pt_port, pt_buttons, SERIO_OOB_DATA);
+ }
}
static void synaptics_report_buttons(struct psmouse *psmouse,
@@ -1132,7 +1132,7 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse)
if (SYN_CAP_PASS_THROUGH(priv->capabilities) &&
synaptics_is_pt_packet(psmouse->packet)) {
if (priv->pt_port)
- synaptics_pass_pt_packet(psmouse, priv->pt_port,
+ synaptics_pass_pt_packet(priv->pt_port,
psmouse->packet);
} else
synaptics_process_packet(psmouse);
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 56faa7ec4434..116ae2546ace 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -183,7 +183,6 @@ struct synaptics_data {
bool disable_gesture; /* disable gestures */
struct serio *pt_port; /* Pass-through serio port */
- unsigned char pt_buttons; /* Pass-through buttons */
/*
* Last received Advanced Gesture Mode (AGM) packet. An AGM packet
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index 7331084973e1..922ea02edcc3 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -379,7 +379,7 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
if (!set_properties)
return 0;
- if (trackpoint_read(&psmouse->ps2dev, TP_EXT_BTN, &button_info)) {
+ if (trackpoint_read(ps2dev, TP_EXT_BTN, &button_info)) {
psmouse_warn(psmouse, "failed to get extended button data\n");
button_info = 0;
}
@@ -402,7 +402,7 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
trackpoint_defaults(psmouse->private);
- error = trackpoint_power_on_reset(&psmouse->ps2dev);
+ error = trackpoint_power_on_reset(ps2dev);
/* Write defaults to TP only if reset fails. */
if (error)
diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
index bb7762bf2879..7172b88cd064 100644
--- a/drivers/input/rmi4/Kconfig
+++ b/drivers/input/rmi4/Kconfig
@@ -9,9 +9,11 @@ config RMI4_CORE
If unsure, say Y.
+if RMI4_CORE
+
config RMI4_I2C
tristate "RMI4 I2C Support"
- depends on RMI4_CORE && I2C
+ depends on I2C
help
Say Y here if you want to support RMI4 devices connected to an I2C
bus.
@@ -20,7 +22,7 @@ config RMI4_I2C
config RMI4_SPI
tristate "RMI4 SPI Support"
- depends on RMI4_CORE && SPI
+ depends on SPI
help
Say Y here if you want to support RMI4 devices connected to a SPI
bus.
@@ -29,7 +31,7 @@ config RMI4_SPI
config RMI4_SMB
tristate "RMI4 SMB Support"
- depends on RMI4_CORE && I2C
+ depends on I2C
help
Say Y here if you want to support RMI4 devices connected to an SMB
bus.
@@ -40,13 +42,13 @@ config RMI4_SMB
called rmi_smbus.
config RMI4_F03
- bool "RMI4 Function 03 (PS2 Guest)"
+ bool "RMI4 Function 03 (PS2 Guest)"
depends on RMI4_CORE
- help
- Say Y here if you want to add support for RMI4 function 03.
+ help
+ Say Y here if you want to add support for RMI4 function 03.
- Function 03 provides PS2 guest support for RMI4 devices. This
- includes support for TrackPoints on TouchPads.
+ Function 03 provides PS2 guest support for RMI4 devices. This
+ includes support for TrackPoints on TouchPads.
config RMI4_F03_SERIO
tristate
@@ -57,12 +59,10 @@ config RMI4_F03_SERIO
config RMI4_2D_SENSOR
bool
- depends on RMI4_CORE
config RMI4_F11
bool "RMI4 Function 11 (2D pointing)"
select RMI4_2D_SENSOR
- depends on RMI4_CORE
help
Say Y here if you want to add support for RMI4 function 11.
@@ -73,7 +73,6 @@ config RMI4_F11
config RMI4_F12
bool "RMI4 Function 12 (2D pointing)"
select RMI4_2D_SENSOR
- depends on RMI4_CORE
help
Say Y here if you want to add support for RMI4 function 12.
@@ -83,7 +82,6 @@ config RMI4_F12
config RMI4_F30
bool "RMI4 Function 30 (GPIO LED)"
- depends on RMI4_CORE
help
Say Y here if you want to add support for RMI4 function 30.
@@ -92,7 +90,6 @@ config RMI4_F30
config RMI4_F34
bool "RMI4 Function 34 (Device reflash)"
- depends on RMI4_CORE
select FW_LOADER
help
Say Y here if you want to add support for RMI4 function 34.
@@ -103,7 +100,6 @@ config RMI4_F34
config RMI4_F54
bool "RMI4 Function 54 (Analog diagnostics)"
- depends on RMI4_CORE
depends on VIDEO_V4L2=y || (RMI4_CORE=m && VIDEO_V4L2=m)
select VIDEOBUF2_VMALLOC
select RMI4_F55
@@ -115,9 +111,10 @@ config RMI4_F54
config RMI4_F55
bool "RMI4 Function 55 (Sensor tuning)"
- depends on RMI4_CORE
help
Say Y here if you want to add support for RMI4 function 55
Function 55 provides access to the RMI4 touch sensor tuning
mechanism.
+
+endif # RMI_CORE
diff --git a/drivers/input/rmi4/rmi_2d_sensor.c b/drivers/input/rmi4/rmi_2d_sensor.c
index 07007ff8e29f..8bb866c7b985 100644
--- a/drivers/input/rmi4/rmi_2d_sensor.c
+++ b/drivers/input/rmi4/rmi_2d_sensor.c
@@ -144,8 +144,13 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor)
int input_flags = 0;
if (sensor->report_abs) {
- if (sensor->axis_align.swap_axes)
+ if (sensor->axis_align.swap_axes) {
swap(sensor->max_x, sensor->max_y);
+ swap(sensor->axis_align.clip_x_low,
+ sensor->axis_align.clip_y_low);
+ swap(sensor->axis_align.clip_x_high,
+ sensor->axis_align.clip_y_high);
+ }
sensor->min_x = sensor->axis_align.clip_x_low;
if (sensor->axis_align.clip_x_high)
diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
index 1c40d94ca506..ae1bffe45c75 100644
--- a/drivers/input/rmi4/rmi_bus.c
+++ b/drivers/input/rmi4/rmi_bus.c
@@ -55,7 +55,7 @@ static void rmi_release_device(struct device *dev)
kfree(rmi_dev);
}
-static struct device_type rmi_device_type = {
+static const struct device_type rmi_device_type = {
.name = "rmi4_sensor",
.release = rmi_release_device,
};
@@ -134,7 +134,7 @@ static void rmi_release_function(struct device *dev)
kfree(fn);
}
-static struct device_type rmi_function_type = {
+static const struct device_type rmi_function_type = {
.name = "rmi4_function",
.release = rmi_release_function,
};
@@ -261,10 +261,10 @@ int __rmi_register_function_handler(struct rmi_function_handler *handler,
driver->probe = rmi_function_probe;
driver->remove = rmi_function_remove;
- error = driver_register(&handler->driver);
+ error = driver_register(driver);
if (error) {
pr_err("driver_register() failed for %s, error: %d\n",
- handler->driver.name, error);
+ driver->name, error);
return error;
}
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index bf5c36e229ba..d64fc92858f2 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -265,6 +265,19 @@ static int rmi_irq_init(struct rmi_device *rmi_dev)
return 0;
}
+struct rmi_function *rmi_find_function(struct rmi_device *rmi_dev, u8 number)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ struct rmi_function *entry;
+
+ list_for_each_entry(entry, &data->function_list, node) {
+ if (entry->fd.function_number == number)
+ return entry;
+ }
+
+ return NULL;
+}
+
static int suspend_one_function(struct rmi_function *fn)
{
struct rmi_function_handler *fh;
@@ -364,7 +377,7 @@ static void rmi_driver_set_input_name(struct rmi_device *rmi_dev,
struct input_dev *input)
{
struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
- char *device_name = rmi_f01_get_product_ID(data->f01_container);
+ const char *device_name = rmi_f01_get_product_ID(data->f01_container);
char *name;
name = devm_kasprintf(&rmi_dev->dev, GFP_KERNEL,
@@ -836,7 +849,7 @@ static int rmi_create_function(struct rmi_device *rmi_dev,
void *ctx, const struct pdt_entry *pdt)
{
struct device *dev = &rmi_dev->dev;
- struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ struct rmi_driver_data *data = dev_get_drvdata(dev);
int *current_irq_count = ctx;
struct rmi_function *fn;
int i;
@@ -1040,7 +1053,7 @@ int rmi_probe_interrupts(struct rmi_driver_data *data)
}
if (data->bootloader_mode)
- dev_warn(&rmi_dev->dev, "Device in bootloader mode.\n");
+ dev_warn(dev, "Device in bootloader mode.\n");
data->irq_count = irq_count;
data->num_of_irq_regs = (data->irq_count + 7) / 8;
@@ -1049,7 +1062,7 @@ int rmi_probe_interrupts(struct rmi_driver_data *data)
data->irq_memory = devm_kzalloc(dev, size * 4, GFP_KERNEL);
if (!data->irq_memory) {
dev_err(dev, "Failed to allocate memory for irq masks.\n");
- return retval;
+ return -ENOMEM;
}
data->irq_status = data->irq_memory + size * 0;
diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
index 24f8f764d171..f1a2a2266022 100644
--- a/drivers/input/rmi4/rmi_driver.h
+++ b/drivers/input/rmi4/rmi_driver.h
@@ -93,6 +93,7 @@ bool rmi_is_physical_driver(struct device_driver *);
int rmi_register_physical_driver(void);
void rmi_unregister_physical_driver(void);
void rmi_free_function_list(struct rmi_device *rmi_dev);
+struct rmi_function *rmi_find_function(struct rmi_device *rmi_dev, u8 number);
int rmi_enable_sensor(struct rmi_device *rmi_dev);
int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
int (*callback)(struct rmi_device *rmi_dev, void *ctx,
@@ -104,7 +105,20 @@ int rmi_init_functions(struct rmi_driver_data *data);
int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
const struct pdt_entry *pdt);
-char *rmi_f01_get_product_ID(struct rmi_function *fn);
+const char *rmi_f01_get_product_ID(struct rmi_function *fn);
+
+#ifdef CONFIG_RMI4_F03
+int rmi_f03_overwrite_button(struct rmi_function *fn, unsigned int button,
+ int value);
+void rmi_f03_commit_buttons(struct rmi_function *fn);
+#else
+static inline int rmi_f03_overwrite_button(struct rmi_function *fn,
+ unsigned int button, int value)
+{
+ return 0;
+}
+static inline void rmi_f03_commit_buttons(struct rmi_function *fn) {}
+#endif
#ifdef CONFIG_RMI4_F34
int rmi_f34_create_sysfs(struct rmi_device *rmi_dev);
diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c
index 18baf4ceb940..7f7e9176f7ea 100644
--- a/drivers/input/rmi4/rmi_f01.c
+++ b/drivers/input/rmi4/rmi_f01.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/of.h>
+#include <asm/unaligned.h>
#include "rmi_driver.h"
#define RMI_PRODUCT_ID_LENGTH 10
@@ -54,6 +55,7 @@ struct f01_basic_properties {
u8 product_id[RMI_PRODUCT_ID_LENGTH + 1];
u16 productinfo;
u32 firmware_id;
+ u32 package_id;
};
/* F01 device status bits */
@@ -220,8 +222,19 @@ static int rmi_f01_read_properties(struct rmi_device *rmi_dev,
has_build_id_query = !!(queries[0] & BIT(1));
}
- if (has_package_id_query)
+ if (has_package_id_query) {
+ ret = rmi_read_block(rmi_dev, prod_info_addr,
+ queries, sizeof(__le64));
+ if (ret) {
+ dev_err(&rmi_dev->dev,
+ "Failed to read package info: %d\n",
+ ret);
+ return ret;
+ }
+
+ props->package_id = get_unaligned_le64(queries);
prod_info_addr++;
+ }
if (has_build_id_query) {
ret = rmi_read_block(rmi_dev, prod_info_addr, queries,
@@ -241,13 +254,90 @@ static int rmi_f01_read_properties(struct rmi_device *rmi_dev,
return 0;
}
-char *rmi_f01_get_product_ID(struct rmi_function *fn)
+const char *rmi_f01_get_product_ID(struct rmi_function *fn)
{
struct f01_data *f01 = dev_get_drvdata(&fn->dev);
return f01->properties.product_id;
}
+static ssize_t rmi_driver_manufacturer_id_show(struct device *dev,
+ struct device_attribute *dattr,
+ char *buf)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(dev);
+ struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n",
+ f01->properties.manufacturer_id);
+}
+
+static DEVICE_ATTR(manufacturer_id, 0444,
+ rmi_driver_manufacturer_id_show, NULL);
+
+static ssize_t rmi_driver_dom_show(struct device *dev,
+ struct device_attribute *dattr, char *buf)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(dev);
+ struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", f01->properties.dom);
+}
+
+static DEVICE_ATTR(date_of_manufacture, 0444, rmi_driver_dom_show, NULL);
+
+static ssize_t rmi_driver_product_id_show(struct device *dev,
+ struct device_attribute *dattr,
+ char *buf)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(dev);
+ struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", f01->properties.product_id);
+}
+
+static DEVICE_ATTR(product_id, 0444, rmi_driver_product_id_show, NULL);
+
+static ssize_t rmi_driver_firmware_id_show(struct device *dev,
+ struct device_attribute *dattr,
+ char *buf)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(dev);
+ struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", f01->properties.firmware_id);
+}
+
+static DEVICE_ATTR(firmware_id, 0444, rmi_driver_firmware_id_show, NULL);
+
+static ssize_t rmi_driver_package_id_show(struct device *dev,
+ struct device_attribute *dattr,
+ char *buf)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(dev);
+ struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev);
+
+ u32 package_id = f01->properties.package_id;
+
+ return scnprintf(buf, PAGE_SIZE, "%04x.%04x\n",
+ package_id & 0xffff, (package_id >> 16) & 0xffff);
+}
+
+static DEVICE_ATTR(package_id, 0444, rmi_driver_package_id_show, NULL);
+
+static struct attribute *rmi_f01_attrs[] = {
+ &dev_attr_manufacturer_id.attr,
+ &dev_attr_date_of_manufacture.attr,
+ &dev_attr_product_id.attr,
+ &dev_attr_firmware_id.attr,
+ &dev_attr_package_id.attr,
+ NULL
+};
+
+static struct attribute_group rmi_f01_attr_group = {
+ .attrs = rmi_f01_attrs,
+};
+
#ifdef CONFIG_OF
static int rmi_f01_of_probe(struct device *dev,
struct rmi_device_platform_data *pdata)
@@ -480,9 +570,18 @@ static int rmi_f01_probe(struct rmi_function *fn)
dev_set_drvdata(&fn->dev, f01);
+ error = sysfs_create_group(&fn->rmi_dev->dev.kobj, &rmi_f01_attr_group);
+ if (error)
+ dev_warn(&fn->dev, "Failed to create sysfs group: %d\n", error);
+
return 0;
}
+static void rmi_f01_remove(struct rmi_function *fn)
+{
+ sysfs_remove_group(&fn->rmi_dev->dev.kobj, &rmi_f01_attr_group);
+}
+
static int rmi_f01_config(struct rmi_function *fn)
{
struct f01_data *f01 = dev_get_drvdata(&fn->dev);
@@ -622,6 +721,7 @@ struct rmi_function_handler rmi_f01_handler = {
},
.func = 0x01,
.probe = rmi_f01_probe,
+ .remove = rmi_f01_remove,
.config = rmi_f01_config,
.attention = rmi_f01_attention,
.suspend = rmi_f01_suspend,
diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c
index 8a7ca3e2f95e..77dad045a468 100644
--- a/drivers/input/rmi4/rmi_f03.c
+++ b/drivers/input/rmi4/rmi_f03.c
@@ -26,15 +26,53 @@
#define RMI_F03_BYTES_PER_DEVICE_SHIFT 4
#define RMI_F03_QUEUE_LENGTH 0x0F
+#define PSMOUSE_OOB_EXTRA_BTNS 0x01
+
struct f03_data {
struct rmi_function *fn;
struct serio *serio;
+ unsigned int overwrite_buttons;
+
u8 device_count;
u8 rx_queue_length;
};
+int rmi_f03_overwrite_button(struct rmi_function *fn, unsigned int button,
+ int value)
+{
+ struct f03_data *f03 = dev_get_drvdata(&fn->dev);
+ unsigned int bit;
+
+ if (button < BTN_LEFT || button > BTN_MIDDLE)
+ return -EINVAL;
+
+ bit = BIT(button - BTN_LEFT);
+
+ if (value)
+ f03->overwrite_buttons |= bit;
+ else
+ f03->overwrite_buttons &= ~bit;
+
+ return 0;
+}
+
+void rmi_f03_commit_buttons(struct rmi_function *fn)
+{
+ struct f03_data *f03 = dev_get_drvdata(&fn->dev);
+ struct serio *serio = f03->serio;
+
+ serio_pause_rx(serio);
+ if (serio->drv) {
+ serio->drv->interrupt(serio, PSMOUSE_OOB_EXTRA_BTNS,
+ SERIO_OOB_DATA);
+ serio->drv->interrupt(serio, f03->overwrite_buttons,
+ SERIO_OOB_DATA);
+ }
+ serio_continue_rx(serio);
+}
+
static int rmi_f03_pt_write(struct serio *id, unsigned char val)
{
struct f03_data *f03 = id->port_data;
@@ -175,9 +213,6 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
int i;
int error;
- if (!rmi_dev)
- return -ENODEV;
-
if (drvdata->attn_data.data) {
/* First grab the data passed by the transport device */
if (drvdata->attn_data.size < ob_len) {
diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
index f4b491e3e0fd..3422464af229 100644
--- a/drivers/input/rmi4/rmi_f30.c
+++ b/drivers/input/rmi4/rmi_f30.c
@@ -16,30 +16,24 @@
/* Defs for Query 0 */
#define RMI_F30_EXTENDED_PATTERNS 0x01
-#define RMI_F30_HAS_MAPPABLE_BUTTONS (1 << 1)
-#define RMI_F30_HAS_LED (1 << 2)
-#define RMI_F30_HAS_GPIO (1 << 3)
-#define RMI_F30_HAS_HAPTIC (1 << 4)
-#define RMI_F30_HAS_GPIO_DRV_CTL (1 << 5)
-#define RMI_F30_HAS_MECH_MOUSE_BTNS (1 << 6)
+#define RMI_F30_HAS_MAPPABLE_BUTTONS BIT(1)
+#define RMI_F30_HAS_LED BIT(2)
+#define RMI_F30_HAS_GPIO BIT(3)
+#define RMI_F30_HAS_HAPTIC BIT(4)
+#define RMI_F30_HAS_GPIO_DRV_CTL BIT(5)
+#define RMI_F30_HAS_MECH_MOUSE_BTNS BIT(6)
/* Defs for Query 1 */
#define RMI_F30_GPIO_LED_COUNT 0x1F
/* Defs for Control Registers */
#define RMI_F30_CTRL_1_GPIO_DEBOUNCE 0x01
-#define RMI_F30_CTRL_1_HALT (1 << 4)
-#define RMI_F30_CTRL_1_HALTED (1 << 5)
+#define RMI_F30_CTRL_1_HALT BIT(4)
+#define RMI_F30_CTRL_1_HALTED BIT(5)
#define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS 0x03
-struct rmi_f30_ctrl_data {
- int address;
- int length;
- u8 *regs;
-};
-
#define RMI_F30_CTRL_MAX_REGS 32
-#define RMI_F30_CTRL_MAX_BYTES ((RMI_F30_CTRL_MAX_REGS + 7) >> 3)
+#define RMI_F30_CTRL_MAX_BYTES DIV_ROUND_UP(RMI_F30_CTRL_MAX_REGS, 8)
#define RMI_F30_CTRL_MAX_REG_BLOCKS 11
#define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES \
@@ -54,6 +48,15 @@ struct rmi_f30_ctrl_data {
+ 1 \
+ 1)
+#define TRACKSTICK_RANGE_START 3
+#define TRACKSTICK_RANGE_END 6
+
+struct rmi_f30_ctrl_data {
+ int address;
+ int length;
+ u8 *regs;
+};
+
struct f30_data {
/* Query Data */
bool has_extended_pattern;
@@ -76,18 +79,21 @@ struct f30_data {
u16 *gpioled_key_map;
struct input_dev *input;
+
+ struct rmi_function *f03;
+ bool trackstick_buttons;
};
static int rmi_f30_read_control_parameters(struct rmi_function *fn,
struct f30_data *f30)
{
- struct rmi_device *rmi_dev = fn->rmi_dev;
- int error = 0;
+ int error;
- error = rmi_read_block(rmi_dev, fn->fd.control_base_addr,
- f30->ctrl_regs, f30->ctrl_regs_size);
+ error = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr,
+ f30->ctrl_regs, f30->ctrl_regs_size);
if (error) {
- dev_err(&rmi_dev->dev, "%s : Could not read control registers at 0x%x error (%d)\n",
+ dev_err(&fn->dev,
+ "%s: Could not read control registers at 0x%x: %d\n",
__func__, fn->fd.control_base_addr, error);
return error;
}
@@ -95,24 +101,39 @@ static int rmi_f30_read_control_parameters(struct rmi_function *fn,
return 0;
}
+static void rmi_f30_report_button(struct rmi_function *fn,
+ struct f30_data *f30, unsigned int button)
+{
+ unsigned int reg_num = button >> 3;
+ unsigned int bit_num = button & 0x07;
+ u16 key_code = f30->gpioled_key_map[button];
+ bool key_down = !(f30->data_regs[reg_num] & BIT(bit_num));
+
+ if (f30->trackstick_buttons &&
+ button >= TRACKSTICK_RANGE_START &&
+ button <= TRACKSTICK_RANGE_END) {
+ rmi_f03_overwrite_button(f30->f03, key_code, key_down);
+ } else {
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+ "%s: call input report key (0x%04x) value (0x%02x)",
+ __func__, key_code, key_down);
+
+ input_report_key(f30->input, key_code, key_down);
+ }
+}
+
static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
{
struct f30_data *f30 = dev_get_drvdata(&fn->dev);
- struct rmi_device *rmi_dev = fn->rmi_dev;
- struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
- int retval;
- int gpiled = 0;
- int value = 0;
+ struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
+ int error;
int i;
- int reg_num;
-
- if (!f30->input)
- return 0;
/* Read the gpi led data. */
if (drvdata->attn_data.data) {
if (drvdata->attn_data.size < f30->register_count) {
- dev_warn(&fn->dev, "F30 interrupted, but data is missing\n");
+ dev_warn(&fn->dev,
+ "F30 interrupted, but data is missing\n");
return 0;
}
memcpy(f30->data_regs, drvdata->attn_data.data,
@@ -120,72 +141,24 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
drvdata->attn_data.data += f30->register_count;
drvdata->attn_data.size -= f30->register_count;
} else {
- retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
- f30->data_regs, f30->register_count);
-
- if (retval) {
- dev_err(&fn->dev, "%s: Failed to read F30 data registers.\n",
- __func__);
- return retval;
- }
- }
-
- for (reg_num = 0; reg_num < f30->register_count; ++reg_num) {
- for (i = 0; gpiled < f30->gpioled_count && i < 8; ++i,
- ++gpiled) {
- if (f30->gpioled_key_map[gpiled] != 0) {
- /* buttons have pull up resistors */
- value = (((f30->data_regs[reg_num] >> i) & 0x01)
- == 0);
-
- rmi_dbg(RMI_DEBUG_FN, &fn->dev,
- "%s: call input report key (0x%04x) value (0x%02x)",
- __func__,
- f30->gpioled_key_map[gpiled], value);
- input_report_key(f30->input,
- f30->gpioled_key_map[gpiled],
- value);
- }
-
+ error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr,
+ f30->data_regs, f30->register_count);
+ if (error) {
+ dev_err(&fn->dev,
+ "%s: Failed to read F30 data registers: %d\n",
+ __func__, error);
+ return error;
}
}
- return 0;
-}
-
-static int rmi_f30_register_device(struct rmi_function *fn)
-{
- int i;
- struct rmi_device *rmi_dev = fn->rmi_dev;
- struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
- struct f30_data *f30 = dev_get_drvdata(&fn->dev);
- struct input_dev *input_dev;
- int button_count = 0;
-
- input_dev = drv_data->input;
- if (!input_dev) {
- dev_info(&fn->dev, "F30: no input device found, ignoring.\n");
- return -EINVAL;
- }
-
- f30->input = input_dev;
-
- set_bit(EV_KEY, input_dev->evbit);
-
- input_dev->keycode = f30->gpioled_key_map;
- input_dev->keycodesize = sizeof(u16);
- input_dev->keycodemax = f30->gpioled_count;
-
- for (i = 0; i < f30->gpioled_count; i++) {
- if (f30->gpioled_key_map[i] != 0) {
- input_set_capability(input_dev, EV_KEY,
- f30->gpioled_key_map[i]);
- button_count++;
- }
+ if (f30->has_gpio) {
+ for (i = 0; i < f30->gpioled_count; i++)
+ if (f30->gpioled_key_map[i] != KEY_RESERVED)
+ rmi_f30_report_button(fn, f30, i);
+ if (f30->trackstick_buttons)
+ rmi_f03_commit_buttons(f30->f03);
}
- if (button_count == 1)
- __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
return 0;
}
@@ -197,6 +170,12 @@ static int rmi_f30_config(struct rmi_function *fn)
rmi_get_platform_data(fn->rmi_dev);
int error;
+ if (pdata->f30_data.trackstick_buttons) {
+ /* Try [re-]establish link to F03. */
+ f30->f03 = rmi_find_function(fn->rmi_dev, 0x03);
+ f30->trackstick_buttons = f30->f03 != NULL;
+ }
+
if (pdata->f30_data.disable) {
drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
} else {
@@ -204,19 +183,20 @@ static int rmi_f30_config(struct rmi_function *fn)
error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr,
f30->ctrl_regs, f30->ctrl_regs_size);
if (error) {
- dev_err(&fn->rmi_dev->dev,
- "%s : Could not write control registers at 0x%x error (%d)\n",
+ dev_err(&fn->dev,
+ "%s: Could not write control registers at 0x%x: %d\n",
__func__, fn->fd.control_base_addr, error);
return error;
}
drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
}
+
return 0;
}
-static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
- int *ctrl_addr, int len, u8 **reg)
+static void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
+ int *ctrl_addr, int len, u8 **reg)
{
ctrl->address = *ctrl_addr;
ctrl->length = len;
@@ -225,8 +205,7 @@ static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
*reg += len;
}
-static inline bool rmi_f30_is_valid_button(int button,
- struct rmi_f30_ctrl_data *ctrl)
+static bool rmi_f30_is_valid_button(int button, struct rmi_f30_ctrl_data *ctrl)
{
int byte_position = button >> 3;
int bit_position = button & 0x07;
@@ -239,32 +218,66 @@ static inline bool rmi_f30_is_valid_button(int button,
(ctrl[3].regs[byte_position] & BIT(bit_position));
}
-static inline int rmi_f30_initialize(struct rmi_function *fn)
+static int rmi_f30_map_gpios(struct rmi_function *fn,
+ struct f30_data *f30)
{
- struct f30_data *f30;
- struct rmi_device *rmi_dev = fn->rmi_dev;
- const struct rmi_device_platform_data *pdata;
- int retval = 0;
- int control_address;
+ const struct rmi_device_platform_data *pdata =
+ rmi_get_platform_data(fn->rmi_dev);
+ struct input_dev *input = f30->input;
+ unsigned int button = BTN_LEFT;
+ unsigned int trackstick_button = BTN_LEFT;
+ bool button_mapped = false;
int i;
- int button;
- u8 buf[RMI_F30_QUERY_SIZE];
- u8 *ctrl_reg;
- u8 *map_memory;
- f30 = devm_kzalloc(&fn->dev, sizeof(struct f30_data),
- GFP_KERNEL);
- if (!f30)
+ f30->gpioled_key_map = devm_kcalloc(&fn->dev,
+ f30->gpioled_count,
+ sizeof(f30->gpioled_key_map[0]),
+ GFP_KERNEL);
+ if (!f30->gpioled_key_map) {
+ dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n");
return -ENOMEM;
+ }
- dev_set_drvdata(&fn->dev, f30);
+ for (i = 0; i < f30->gpioled_count; i++) {
+ if (!rmi_f30_is_valid_button(i, f30->ctrl))
+ continue;
+
+ if (pdata->f30_data.trackstick_buttons &&
+ i >= TRACKSTICK_RANGE_START && i < TRACKSTICK_RANGE_END) {
+ f30->gpioled_key_map[i] = trackstick_button++;
+ } else if (!pdata->f30_data.buttonpad || !button_mapped) {
+ f30->gpioled_key_map[i] = button;
+ input_set_capability(input, EV_KEY, button++);
+ button_mapped = true;
+ }
+ }
+
+ input->keycode = f30->gpioled_key_map;
+ input->keycodesize = sizeof(f30->gpioled_key_map[0]);
+ input->keycodemax = f30->gpioled_count;
+
+ /*
+ * Buttonpad could be also inferred from f30->has_mech_mouse_btns,
+ * but I am not sure, so use only the pdata info.
+ */
+ if (pdata->f30_data.buttonpad)
+ __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+
+ return 0;
+}
- retval = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, buf,
- RMI_F30_QUERY_SIZE);
+static int rmi_f30_initialize(struct rmi_function *fn, struct f30_data *f30)
+{
+ u8 *ctrl_reg = f30->ctrl_regs;
+ int control_address = fn->fd.control_base_addr;
+ u8 buf[RMI_F30_QUERY_SIZE];
+ int error;
- if (retval) {
- dev_err(&fn->dev, "Failed to read query register.\n");
- return retval;
+ error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
+ buf, RMI_F30_QUERY_SIZE);
+ if (error) {
+ dev_err(&fn->dev, "Failed to read query register\n");
+ return error;
}
f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS;
@@ -276,101 +289,71 @@ static inline int rmi_f30_initialize(struct rmi_function *fn)
f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS;
f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT;
- f30->register_count = (f30->gpioled_count + 7) >> 3;
-
- control_address = fn->fd.control_base_addr;
- ctrl_reg = f30->ctrl_regs;
+ f30->register_count = DIV_ROUND_UP(f30->gpioled_count, 8);
if (f30->has_gpio && f30->has_led)
rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address,
- f30->register_count, &ctrl_reg);
+ f30->register_count, &ctrl_reg);
- rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address, sizeof(u8),
- &ctrl_reg);
+ rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address,
+ sizeof(u8), &ctrl_reg);
if (f30->has_gpio) {
rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address,
- f30->register_count, &ctrl_reg);
+ f30->register_count, &ctrl_reg);
rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address,
- f30->register_count, &ctrl_reg);
+ f30->register_count, &ctrl_reg);
}
if (f30->has_led) {
- int ctrl5_len;
-
rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address,
- f30->register_count, &ctrl_reg);
-
- if (f30->has_extended_pattern)
- ctrl5_len = 6;
- else
- ctrl5_len = 2;
+ f30->register_count, &ctrl_reg);
rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address,
- ctrl5_len, &ctrl_reg);
+ f30->has_extended_pattern ? 6 : 2,
+ &ctrl_reg);
}
if (f30->has_led || f30->has_gpio_driver_control) {
/* control 6 uses a byte per gpio/led */
rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address,
- f30->gpioled_count, &ctrl_reg);
+ f30->gpioled_count, &ctrl_reg);
}
if (f30->has_mappable_buttons) {
/* control 7 uses a byte per gpio/led */
rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address,
- f30->gpioled_count, &ctrl_reg);
+ f30->gpioled_count, &ctrl_reg);
}
if (f30->has_haptic) {
rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address,
- f30->register_count, &ctrl_reg);
+ f30->register_count, &ctrl_reg);
rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address,
- sizeof(u8), &ctrl_reg);
+ sizeof(u8), &ctrl_reg);
}
if (f30->has_mech_mouse_btns)
rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address,
- sizeof(u8), &ctrl_reg);
+ sizeof(u8), &ctrl_reg);
- f30->ctrl_regs_size = ctrl_reg - f30->ctrl_regs
- ?: RMI_F30_CTRL_REGS_MAX_SIZE;
+ f30->ctrl_regs_size = ctrl_reg -
+ f30->ctrl_regs ?: RMI_F30_CTRL_REGS_MAX_SIZE;
- retval = rmi_f30_read_control_parameters(fn, f30);
- if (retval < 0) {
+ error = rmi_f30_read_control_parameters(fn, f30);
+ if (error) {
dev_err(&fn->dev,
- "Failed to initialize F19 control params.\n");
- return retval;
- }
-
- map_memory = devm_kzalloc(&fn->dev,
- (f30->gpioled_count * (sizeof(u16))),
- GFP_KERNEL);
- if (!map_memory) {
- dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n");
- return -ENOMEM;
+ "Failed to initialize F30 control params: %d\n",
+ error);
+ return error;
}
- f30->gpioled_key_map = (u16 *)map_memory;
-
- pdata = rmi_get_platform_data(rmi_dev);
if (f30->has_gpio) {
- button = BTN_LEFT;
- for (i = 0; i < f30->gpioled_count; i++) {
- if (rmi_f30_is_valid_button(i, f30->ctrl)) {
- f30->gpioled_key_map[i] = button++;
-
- /*
- * buttonpad might be given by
- * f30->has_mech_mouse_btns, but I am
- * not sure, so use only the pdata info
- */
- if (pdata->f30_data.buttonpad)
- break;
- }
- }
+ error = rmi_f30_map_gpios(fn, f30);
+ if (error)
+ return error;
}
return 0;
@@ -378,26 +361,33 @@ static inline int rmi_f30_initialize(struct rmi_function *fn)
static int rmi_f30_probe(struct rmi_function *fn)
{
- int rc;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
const struct rmi_device_platform_data *pdata =
- rmi_get_platform_data(fn->rmi_dev);
+ rmi_get_platform_data(rmi_dev);
+ struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+ struct f30_data *f30;
+ int error;
if (pdata->f30_data.disable)
return 0;
- rc = rmi_f30_initialize(fn);
- if (rc < 0)
- goto error_exit;
+ if (!drv_data->input) {
+ dev_info(&fn->dev, "F30: no input device found, ignoring\n");
+ return -ENXIO;
+ }
- rc = rmi_f30_register_device(fn);
- if (rc < 0)
- goto error_exit;
+ f30 = devm_kzalloc(&fn->dev, sizeof(*f30), GFP_KERNEL);
+ if (!f30)
+ return -ENOMEM;
- return 0;
+ f30->input = drv_data->input;
-error_exit:
- return rc;
+ error = rmi_f30_initialize(fn, f30);
+ if (error)
+ return error;
+ dev_set_drvdata(&fn->dev, f30);
+ return 0;
}
struct rmi_function_handler rmi_f30_handler = {
diff --git a/drivers/input/rmi4/rmi_f34.c b/drivers/input/rmi4/rmi_f34.c
index 9774dfbab9bb..425fe140e9df 100644
--- a/drivers/input/rmi4/rmi_f34.c
+++ b/drivers/input/rmi4/rmi_f34.c
@@ -157,6 +157,9 @@ static int rmi_f34_write_blocks(struct f34_data *f34, const void *data,
i + 1, block_count);
data += f34->v5.block_size;
+ f34->update_progress += f34->v5.block_size;
+ f34->update_status = (f34->update_progress * 100) /
+ f34->update_size;
}
return 0;
@@ -174,7 +177,7 @@ static int rmi_f34_write_config(struct f34_data *f34, const void *data)
F34_WRITE_CONFIG_BLOCK);
}
-int rmi_f34_enable_flash(struct f34_data *f34)
+static int rmi_f34_enable_flash(struct f34_data *f34)
{
return rmi_f34_command(f34, F34_ENABLE_FLASH_PROG,
F34_ENABLE_WAIT_MS, true);
@@ -184,9 +187,14 @@ static int rmi_f34_flash_firmware(struct f34_data *f34,
const struct rmi_f34_firmware *syn_fw)
{
struct rmi_function *fn = f34->fn;
+ u32 image_size = le32_to_cpu(syn_fw->image_size);
+ u32 config_size = le32_to_cpu(syn_fw->config_size);
int ret;
- if (syn_fw->image_size) {
+ f34->update_progress = 0;
+ f34->update_size = image_size + config_size;
+
+ if (image_size) {
dev_info(&fn->dev, "Erasing firmware...\n");
ret = rmi_f34_command(f34, F34_ERASE_ALL,
F34_ERASE_WAIT_MS, true);
@@ -194,18 +202,18 @@ static int rmi_f34_flash_firmware(struct f34_data *f34,
return ret;
dev_info(&fn->dev, "Writing firmware (%d bytes)...\n",
- syn_fw->image_size);
+ image_size);
ret = rmi_f34_write_firmware(f34, syn_fw->data);
if (ret)
return ret;
}
- if (syn_fw->config_size) {
+ if (config_size) {
/*
* We only need to erase config if we haven't updated
* firmware.
*/
- if (!syn_fw->image_size) {
+ if (!image_size) {
dev_info(&fn->dev, "Erasing config...\n");
ret = rmi_f34_command(f34, F34_ERASE_CONFIG,
F34_ERASE_WAIT_MS, true);
@@ -214,9 +222,8 @@ static int rmi_f34_flash_firmware(struct f34_data *f34,
}
dev_info(&fn->dev, "Writing config (%d bytes)...\n",
- syn_fw->config_size);
- ret = rmi_f34_write_config(f34,
- &syn_fw->data[syn_fw->image_size]);
+ config_size);
+ ret = rmi_f34_write_config(f34, &syn_fw->data[image_size]);
if (ret)
return ret;
}
@@ -224,21 +231,23 @@ static int rmi_f34_flash_firmware(struct f34_data *f34,
return 0;
}
-int rmi_f34_update_firmware(struct f34_data *f34, const struct firmware *fw)
+static int rmi_f34_update_firmware(struct f34_data *f34,
+ const struct firmware *fw)
{
- const struct rmi_f34_firmware *syn_fw;
+ const struct rmi_f34_firmware *syn_fw =
+ (const struct rmi_f34_firmware *)fw->data;
+ u32 image_size = le32_to_cpu(syn_fw->image_size);
+ u32 config_size = le32_to_cpu(syn_fw->config_size);
int ret;
- syn_fw = (const struct rmi_f34_firmware *)fw->data;
BUILD_BUG_ON(offsetof(struct rmi_f34_firmware, data) !=
F34_FW_IMAGE_OFFSET);
rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
- "FW size:%d, checksum:%08x, image_size:%d, config_size:%d\n",
- (int)fw->size,
+ "FW size:%zd, checksum:%08x, image_size:%d, config_size:%d\n",
+ fw->size,
le32_to_cpu(syn_fw->checksum),
- le32_to_cpu(syn_fw->image_size),
- le32_to_cpu(syn_fw->config_size));
+ image_size, config_size);
rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
"FW bootloader_id:%02x, product_id:%.*s, info: %02x%02x\n",
@@ -246,27 +255,25 @@ int rmi_f34_update_firmware(struct f34_data *f34, const struct firmware *fw)
(int)sizeof(syn_fw->product_id), syn_fw->product_id,
syn_fw->product_info[0], syn_fw->product_info[1]);
- if (syn_fw->image_size &&
- syn_fw->image_size != f34->v5.fw_blocks * f34->v5.block_size) {
+ if (image_size && image_size != f34->v5.fw_blocks * f34->v5.block_size) {
dev_err(&f34->fn->dev,
"Bad firmware image: fw size %d, expected %d\n",
- syn_fw->image_size,
- f34->v5.fw_blocks * f34->v5.block_size);
+ image_size, f34->v5.fw_blocks * f34->v5.block_size);
ret = -EILSEQ;
goto out;
}
- if (syn_fw->config_size &&
- syn_fw->config_size != f34->v5.config_blocks * f34->v5.block_size) {
+ if (config_size &&
+ config_size != f34->v5.config_blocks * f34->v5.block_size) {
dev_err(&f34->fn->dev,
"Bad firmware image: config size %d, expected %d\n",
- syn_fw->config_size,
+ config_size,
f34->v5.config_blocks * f34->v5.block_size);
ret = -EILSEQ;
goto out;
}
- if (syn_fw->image_size && !syn_fw->config_size) {
+ if (image_size && !config_size) {
dev_err(&f34->fn->dev, "Bad firmware image: no config data\n");
ret = -EILSEQ;
goto out;
@@ -283,6 +290,63 @@ out:
return ret;
}
+static int rmi_f34_status(struct rmi_function *fn)
+{
+ struct f34_data *f34 = dev_get_drvdata(&fn->dev);
+
+ /*
+ * The status is the percentage complete, or once complete,
+ * zero for success or a negative return code.
+ */
+ return f34->update_status;
+}
+
+static ssize_t rmi_driver_bootloader_id_show(struct device *dev,
+ struct device_attribute *dattr,
+ char *buf)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(dev);
+ struct rmi_function *fn = data->f34_container;
+ struct f34_data *f34;
+
+ if (fn) {
+ f34 = dev_get_drvdata(&fn->dev);
+
+ if (f34->bl_version == 5)
+ return scnprintf(buf, PAGE_SIZE, "%c%c\n",
+ f34->bootloader_id[0],
+ f34->bootloader_id[1]);
+ else
+ return scnprintf(buf, PAGE_SIZE, "V%d.%d\n",
+ f34->bootloader_id[1],
+ f34->bootloader_id[0]);
+ }
+
+ return 0;
+}
+
+static DEVICE_ATTR(bootloader_id, 0444, rmi_driver_bootloader_id_show, NULL);
+
+static ssize_t rmi_driver_configuration_id_show(struct device *dev,
+ struct device_attribute *dattr,
+ char *buf)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(dev);
+ struct rmi_function *fn = data->f34_container;
+ struct f34_data *f34;
+
+ if (fn) {
+ f34 = dev_get_drvdata(&fn->dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", f34->configuration_id);
+ }
+
+ return 0;
+}
+
+static DEVICE_ATTR(configuration_id, 0444,
+ rmi_driver_configuration_id_show, NULL);
+
static int rmi_firmware_update(struct rmi_driver_data *data,
const struct firmware *fw)
{
@@ -346,7 +410,13 @@ static int rmi_firmware_update(struct rmi_driver_data *data,
else
ret = rmi_f34_update_firmware(f34, fw);
- dev_info(&f34->fn->dev, "Firmware update complete, status:%d\n", ret);
+ if (ret) {
+ f34->update_status = ret;
+ dev_err(&f34->fn->dev,
+ "Firmware update failed, status: %d\n", ret);
+ } else {
+ dev_info(&f34->fn->dev, "Firmware update complete\n");
+ }
rmi_disable_irq(rmi_dev, false);
@@ -377,9 +447,6 @@ static int rmi_firmware_update(struct rmi_driver_data *data,
return ret;
}
-static int rmi_firmware_update(struct rmi_driver_data *data,
- const struct firmware *fw);
-
static ssize_t rmi_driver_update_fw_store(struct device *dev,
struct device_attribute *dattr,
const char *buf, size_t count)
@@ -414,8 +481,27 @@ static ssize_t rmi_driver_update_fw_store(struct device *dev,
static DEVICE_ATTR(update_fw, 0200, NULL, rmi_driver_update_fw_store);
+static ssize_t rmi_driver_update_fw_status_show(struct device *dev,
+ struct device_attribute *dattr,
+ char *buf)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(dev);
+ int update_status = 0;
+
+ if (data->f34_container)
+ update_status = rmi_f34_status(data->f34_container);
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", update_status);
+}
+
+static DEVICE_ATTR(update_fw_status, 0444,
+ rmi_driver_update_fw_status_show, NULL);
+
static struct attribute *rmi_firmware_attrs[] = {
+ &dev_attr_bootloader_id.attr,
+ &dev_attr_configuration_id.attr,
&dev_attr_update_fw.attr,
+ &dev_attr_update_fw_status.attr,
NULL
};
@@ -441,8 +527,6 @@ static int rmi_f34_probe(struct rmi_function *fn)
/* v5 code only supported version 0, try V7 probe */
if (version > 0)
return rmi_f34v7_probe(f34);
- else if (version != 0)
- return -ENODEV;
f34->bl_version = 5;
diff --git a/drivers/input/rmi4/rmi_f34.h b/drivers/input/rmi4/rmi_f34.h
index 2c21056dc375..43a91349b28d 100644
--- a/drivers/input/rmi4/rmi_f34.h
+++ b/drivers/input/rmi4/rmi_f34.h
@@ -301,6 +301,10 @@ struct f34_data {
unsigned char bootloader_id[5];
unsigned char configuration_id[CONFIG_ID_SIZE*2 + 1];
+ int update_status;
+ int update_progress;
+ int update_size;
+
union {
struct f34v5_data v5;
struct f34v7_data v7;
diff --git a/drivers/input/rmi4/rmi_f34v7.c b/drivers/input/rmi4/rmi_f34v7.c
index ca31f9539d9b..56c6c39ad31e 100644
--- a/drivers/input/rmi4/rmi_f34v7.c
+++ b/drivers/input/rmi4/rmi_f34v7.c
@@ -588,6 +588,7 @@ static int rmi_f34v7_check_ui_firmware_size(struct f34_data *f34)
u16 block_count;
block_count = f34->v7.img.ui_firmware.size / f34->v7.block_size;
+ f34->update_size += block_count;
if (block_count != f34->v7.blkcount.ui_firmware) {
dev_err(&f34->fn->dev,
@@ -604,6 +605,7 @@ static int rmi_f34v7_check_ui_config_size(struct f34_data *f34)
u16 block_count;
block_count = f34->v7.img.ui_config.size / f34->v7.block_size;
+ f34->update_size += block_count;
if (block_count != f34->v7.blkcount.ui_config) {
dev_err(&f34->fn->dev, "UI config size mismatch\n");
@@ -618,6 +620,7 @@ static int rmi_f34v7_check_dp_config_size(struct f34_data *f34)
u16 block_count;
block_count = f34->v7.img.dp_config.size / f34->v7.block_size;
+ f34->update_size += block_count;
if (block_count != f34->v7.blkcount.dp_config) {
dev_err(&f34->fn->dev, "Display config size mismatch\n");
@@ -632,6 +635,8 @@ static int rmi_f34v7_check_guest_code_size(struct f34_data *f34)
u16 block_count;
block_count = f34->v7.img.guest_code.size / f34->v7.block_size;
+ f34->update_size += block_count;
+
if (block_count != f34->v7.blkcount.guest_code) {
dev_err(&f34->fn->dev, "Guest code size mismatch\n");
return -EINVAL;
@@ -645,6 +650,7 @@ static int rmi_f34v7_check_bl_config_size(struct f34_data *f34)
u16 block_count;
block_count = f34->v7.img.bl_config.size / f34->v7.block_size;
+ f34->update_size += block_count;
if (block_count != f34->v7.blkcount.bl_config) {
dev_err(&f34->fn->dev, "Bootloader config size mismatch\n");
@@ -881,6 +887,9 @@ static int rmi_f34v7_write_f34v7_blocks(struct f34_data *f34,
block_ptr += (transfer * f34->v7.block_size);
remaining -= transfer;
+ f34->update_progress += transfer;
+ f34->update_status = (f34->update_progress * 100) /
+ f34->update_size;
} while (remaining);
return 0;
@@ -1191,6 +1200,8 @@ int rmi_f34v7_do_reflash(struct f34_data *f34, const struct firmware *fw)
rmi_f34v7_read_queries_bl_version(f34);
f34->v7.image = fw->data;
+ f34->update_progress = 0;
+ f34->update_size = 0;
ret = rmi_f34v7_parse_image_info(f34);
if (ret < 0)
diff --git a/drivers/input/serio/at32psif.c b/drivers/input/serio/at32psif.c
index 2e4ff5bac754..e420fd781d44 100644
--- a/drivers/input/serio/at32psif.c
+++ b/drivers/input/serio/at32psif.c
@@ -159,13 +159,12 @@ static int psif_open(struct serio *io)
retval = clk_enable(psif->pclk);
if (retval)
- goto out;
+ return retval;
psif_writel(psif, CR, PSIF_BIT(CR_TXEN) | PSIF_BIT(CR_RXEN));
psif_writel(psif, IER, PSIF_BIT(RXRDY));
psif->open = true;
-out:
return retval;
}
@@ -210,16 +209,12 @@ static int __init psif_probe(struct platform_device *pdev)
int ret;
psif = kzalloc(sizeof(struct psif), GFP_KERNEL);
- if (!psif) {
- dev_dbg(&pdev->dev, "out of memory\n");
- ret = -ENOMEM;
- goto out;
- }
+ if (!psif)
+ return -ENOMEM;
psif->pdev = pdev;
io = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (!io) {
- dev_dbg(&pdev->dev, "out of memory\n");
ret = -ENOMEM;
goto out_free_psif;
}
@@ -297,7 +292,6 @@ out_free_io:
kfree(io);
out_free_psif:
kfree(psif);
-out:
return ret;
}
diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c
index c948866edf87..25151d9214e0 100644
--- a/drivers/input/serio/hyperv-keyboard.c
+++ b/drivers/input/serio/hyperv-keyboard.c
@@ -402,7 +402,6 @@ static int hv_kbd_remove(struct hv_device *hv_dev)
{
struct hv_kbd_dev *kbd_dev = hv_get_drvdata(hv_dev);
- device_init_wakeup(&hv_dev->device, false);
serio_unregister_port(kbd_dev->hv_serio);
vmbus_close(hv_dev->channel);
kfree(kbd_dev);
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index a7618776705a..05afd16ea9c9 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -923,6 +923,10 @@ static struct pnp_driver i8042_pnp_kbd_driver = {
.name = "i8042 kbd",
.id_table = pnp_kbd_devids,
.probe = i8042_pnp_kbd_probe,
+ .driver = {
+ .probe_type = PROBE_FORCE_SYNCHRONOUS,
+ .suppress_bind_attrs = true,
+ },
};
static struct pnp_device_id pnp_aux_devids[] = {
@@ -945,6 +949,10 @@ static struct pnp_driver i8042_pnp_aux_driver = {
.name = "i8042 aux",
.id_table = pnp_aux_devids,
.probe = i8042_pnp_aux_probe,
+ .driver = {
+ .probe_type = PROBE_FORCE_SYNCHRONOUS,
+ .suppress_bind_attrs = true,
+ },
};
static void i8042_pnp_exit(void)
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 62685a768913..c52da651269b 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -312,8 +312,10 @@ static int __i8042_command(unsigned char *param, int command)
for (i = 0; i < ((command >> 12) & 0xf); i++) {
error = i8042_wait_write();
- if (error)
+ if (error) {
+ dbg(" -- i8042 (wait write timeout)\n");
return error;
+ }
dbg("%02x -> i8042 (parameter)\n", param[i]);
i8042_write_data(param[i]);
}
@@ -321,7 +323,7 @@ static int __i8042_command(unsigned char *param, int command)
for (i = 0; i < ((command >> 8) & 0xf); i++) {
error = i8042_wait_read();
if (error) {
- dbg(" -- i8042 (timeout)\n");
+ dbg(" -- i8042 (wait read timeout)\n");
return error;
}
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index 5223cbf94262..14c40892ed82 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -243,18 +243,17 @@ static int xps2_of_probe(struct platform_device *ofdev)
unsigned int irq;
int error;
- dev_info(dev, "Device Tree Probing \'%s\'\n",
- ofdev->dev.of_node->name);
+ dev_info(dev, "Device Tree Probing \'%s\'\n", dev->of_node->name);
/* Get iospace for the device */
- error = of_address_to_resource(ofdev->dev.of_node, 0, &r_mem);
+ error = of_address_to_resource(dev->of_node, 0, &r_mem);
if (error) {
dev_err(dev, "invalid address\n");
return error;
}
/* Get IRQ for the device */
- irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+ irq = irq_of_parse_and_map(dev->of_node, 0);
if (!irq) {
dev_err(dev, "no IRQ found\n");
return -ENODEV;
diff --git a/drivers/input/touchscreen/88pm860x-ts.c b/drivers/input/touchscreen/88pm860x-ts.c
index 251ff2aa0633..7ed828a51f4c 100644
--- a/drivers/input/touchscreen/88pm860x-ts.c
+++ b/drivers/input/touchscreen/88pm860x-ts.c
@@ -240,8 +240,6 @@ static int pm860x_touch_probe(struct platform_device *pdev)
if (!touch)
return -ENOMEM;
- platform_set_drvdata(pdev, touch);
-
touch->idev = devm_input_allocate_device(&pdev->dev);
if (!touch->idev) {
dev_err(&pdev->dev, "Failed to allocate input device!\n");
@@ -285,7 +283,6 @@ static int pm860x_touch_probe(struct platform_device *pdev)
return ret;
}
- platform_set_drvdata(pdev, touch);
return 0;
}
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index efca0133e266..033599777651 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -546,18 +546,6 @@ config TOUCHSCREEN_INEXIO
To compile this driver as a module, choose M here: the
module will be called inexio.
-config TOUCHSCREEN_INTEL_MID
- tristate "Intel MID platform resistive touchscreen"
- depends on INTEL_SCU_IPC
- help
- Say Y here if you have a Intel MID based touchscreen in
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called intel_mid_touch.
-
config TOUCHSCREEN_MK712
tristate "ICS MicroClock MK712 touchscreen"
help
@@ -1177,6 +1165,17 @@ config TOUCHSCREEN_TPS6507X
To compile this driver as a module, choose M here: the
module will be called tps6507x_ts.
+config TOUCHSCREEN_ZET6223
+ tristate "Zeitec ZET6223 touchscreen driver"
+ depends on I2C
+ help
+ Say Y here if you have a touchscreen using Zeitec ZET6223
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called zet6223.
+
config TOUCHSCREEN_ZFORCE
tristate "Neonode zForce infrared touchscreens"
depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 81b86451782d..b622e5344137 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
-obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o
obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o
obj-$(CONFIG_TOUCHSCREEN_MAX11801) += max11801_ts.o
@@ -96,6 +95,7 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
obj-$(CONFIG_TOUCHSCREEN_SX8654) += sx8654.o
obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
+obj-$(CONFIG_TOUCHSCREEN_ZET6223) += zet6223.o
obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o
obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50) += colibri-vf50-ts.o
obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 1ce3ecbe37f8..f5793e3d945f 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -1462,8 +1462,6 @@ static int ads7846_remove(struct spi_device *spi)
{
struct ads7846 *ts = spi_get_drvdata(spi);
- device_init_wakeup(&spi->dev, false);
-
sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
ads7846_disable(ts);
diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c
index 71b5a634cf6d..6562b17117f7 100644
--- a/drivers/input/touchscreen/ar1021_i2c.c
+++ b/drivers/input/touchscreen/ar1021_i2c.c
@@ -127,7 +127,6 @@ static int ar1021_i2c_probe(struct i2c_client *client,
return error;
}
- i2c_set_clientdata(client, ar1021);
return 0;
}
diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c
index 7ec0421c0dd8..8cf0b2be2df4 100644
--- a/drivers/input/touchscreen/atmel-wm97xx.c
+++ b/drivers/input/touchscreen/atmel-wm97xx.c
@@ -339,10 +339,8 @@ static int __init atmel_wm97xx_probe(struct platform_device *pdev)
int ret;
atmel_wm97xx = kzalloc(sizeof(struct atmel_wm97xx), GFP_KERNEL);
- if (!atmel_wm97xx) {
- dev_dbg(&pdev->dev, "out of memory\n");
+ if (!atmel_wm97xx)
return -ENOMEM;
- }
atmel_wm97xx->wm = wm;
atmel_wm97xx->regs = (void *)ATMEL_WM97XX_AC97C_IOMEM;
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index e5d185fe69b9..2302aef2b2d4 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2509,7 +2509,7 @@ static void mxt_debug_init(struct mxt_data *data)
dbg->t37_pages = MXT1386_COLUMNS * MXT1386_PAGES_PER_COLUMN;
else
dbg->t37_pages = DIV_ROUND_UP(data->xsize *
- data->info.matrix_ysize *
+ info->matrix_ysize *
sizeof(u16),
sizeof(dbg->t37_buf->data));
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index 931417eb4f5a..4fa5da8d5fa8 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -637,8 +637,6 @@ static int bu21013_remove(struct i2c_client *client)
kfree(bu21013_data);
- device_init_wakeup(&client->dev, false);
-
return 0;
}
diff --git a/drivers/input/touchscreen/colibri-vf50-ts.c b/drivers/input/touchscreen/colibri-vf50-ts.c
index 69828d015d45..69c08acae264 100644
--- a/drivers/input/touchscreen/colibri-vf50-ts.c
+++ b/drivers/input/touchscreen/colibri-vf50-ts.c
@@ -311,8 +311,6 @@ static int vf50_ts_probe(struct platform_device *pdev)
return -ENOMEM;
}
- platform_set_drvdata(pdev, touchdev);
-
input->name = DRIVER_NAME;
input->id.bustype = BUS_HOST;
input->dev.parent = dev;
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 28466e358fee..8cf8d8d5d4ef 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -67,7 +67,7 @@
#define EDT_SWITCH_MODE_RETRIES 10
#define EDT_SWITCH_MODE_DELAY 5 /* msec */
#define EDT_RAW_DATA_RETRIES 100
-#define EDT_RAW_DATA_DELAY 1 /* msec */
+#define EDT_RAW_DATA_DELAY 1000 /* usec */
enum edt_ver {
M06,
@@ -664,7 +664,7 @@ static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file,
}
do {
- msleep(EDT_RAW_DATA_DELAY);
+ usleep_range(EDT_RAW_DATA_DELAY, EDT_RAW_DATA_DELAY + 100);
val = edt_ft5x06_register_read(tsdata, 0x08);
if (val < 1)
break;
@@ -982,7 +982,6 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
return error;
}
- input_set_drvdata(input, tsdata);
i2c_set_clientdata(client, tsdata);
irq_flags = irq_get_trigger_type(client->irq);
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
index 09be6ced7151..16023867b9da 100644
--- a/drivers/input/touchscreen/eeti_ts.c
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -173,12 +173,11 @@ static int eeti_ts_probe(struct i2c_client *client,
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(&client->dev, "failed to allocate driver data\n");
- goto err0;
+ return -ENOMEM;
}
mutex_init(&priv->mutex);
input = input_allocate_device();
-
if (!input) {
dev_err(&client->dev, "Failed to allocate input device.\n");
goto err1;
@@ -232,7 +231,6 @@ static int eeti_ts_probe(struct i2c_client *client,
*/
eeti_ts_stop(priv);
- device_init_wakeup(&client->dev, 0);
return 0;
err3:
@@ -243,7 +241,6 @@ err2:
err1:
input_free_device(input);
kfree(priv);
-err0:
return err;
}
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
index 1afc08b08155..752ae9cf4514 100644
--- a/drivers/input/touchscreen/egalax_ts.c
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -214,8 +214,6 @@ static int egalax_ts_probe(struct i2c_client *client,
ABS_MT_POSITION_Y, 0, EGALAX_MAX_Y, 0, 0);
input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0);
- input_set_drvdata(input_dev, ts);
-
error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
egalax_ts_interrupt,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
@@ -229,7 +227,6 @@ static int egalax_ts_probe(struct i2c_client *client,
if (error)
return error;
- i2c_set_clientdata(client, ts);
return 0;
}
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 3e6003d32e56..872750eeca93 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -1260,8 +1260,6 @@ static int elants_i2c_probe(struct i2c_client *client,
input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
- input_set_drvdata(ts->input, ts);
-
error = input_register_device(ts->input);
if (error) {
dev_err(&client->dev,
diff --git a/drivers/input/touchscreen/fsl-imx25-tcq.c b/drivers/input/touchscreen/fsl-imx25-tcq.c
index d50ee490c9cc..47fe1f184bbc 100644
--- a/drivers/input/touchscreen/fsl-imx25-tcq.c
+++ b/drivers/input/touchscreen/fsl-imx25-tcq.c
@@ -507,7 +507,7 @@ static int mx25_tcq_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct input_dev *idev;
struct mx25_tcq_priv *priv;
- struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent);
+ struct mx25_tsadc *tsadc = dev_get_drvdata(dev->parent);
struct resource *res;
void __iomem *mem;
int error;
diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
index fe4848bd1f4c..6f76eeedf465 100644
--- a/drivers/input/touchscreen/ili210x.c
+++ b/drivers/input/touchscreen/ili210x.c
@@ -256,7 +256,6 @@ static int ili210x_i2c_probe(struct i2c_client *client,
input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0);
input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0);
- input_set_drvdata(input, priv);
i2c_set_clientdata(client, priv);
error = request_irq(client->irq, ili210x_irq, pdata->irq_flags,
@@ -280,7 +279,7 @@ static int ili210x_i2c_probe(struct i2c_client *client,
goto err_remove_sysfs;
}
- device_init_wakeup(&client->dev, 1);
+ device_init_wakeup(dev, 1);
dev_dbg(dev,
"ILI210x initialized (IRQ: %d), firmware version %d.%d.%d",
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
deleted file mode 100644
index b4f0725a1c3d..000000000000
--- a/drivers/input/touchscreen/intel-mid-touch.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * Intel MID Resistive Touch Screen Driver
- *
- * Copyright (C) 2008 Intel Corp
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com)
- * Ramesh Agarwal (ramesh.agarwal@intel.com)
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * TODO:
- * review conversion of r/m/w sequences
- */
-
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/param.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <asm/intel_scu_ipc.h>
-#include <linux/device.h>
-
-/* PMIC Interrupt registers */
-#define PMIC_REG_ID1 0x00 /* PMIC ID1 register */
-
-/* PMIC Interrupt registers */
-#define PMIC_REG_INT 0x04 /* PMIC interrupt register */
-#define PMIC_REG_MINT 0x05 /* PMIC interrupt mask register */
-
-/* ADC Interrupt registers */
-#define PMIC_REG_ADCINT 0x5F /* ADC interrupt register */
-#define PMIC_REG_MADCINT 0x60 /* ADC interrupt mask register */
-
-/* ADC Control registers */
-#define PMIC_REG_ADCCNTL1 0x61 /* ADC control register */
-
-/* ADC Channel Selection registers */
-#define PMICADDR0 0xA4
-#define END_OF_CHANNEL 0x1F
-
-/* ADC Result register */
-#define PMIC_REG_ADCSNS0H 0x64
-
-/* ADC channels for touch screen */
-#define MRST_TS_CHAN10 0xA /* Touch screen X+ connection */
-#define MRST_TS_CHAN11 0xB /* Touch screen X- connection */
-#define MRST_TS_CHAN12 0xC /* Touch screen Y+ connection */
-#define MRST_TS_CHAN13 0xD /* Touch screen Y- connection */
-
-/* Touch screen channel BIAS constants */
-#define MRST_XBIAS 0x20
-#define MRST_YBIAS 0x40
-#define MRST_ZBIAS 0x80
-
-/* Touch screen coordinates */
-#define MRST_X_MIN 10
-#define MRST_X_MAX 1024
-#define MRST_X_FUZZ 5
-#define MRST_Y_MIN 10
-#define MRST_Y_MAX 1024
-#define MRST_Y_FUZZ 5
-#define MRST_PRESSURE_MIN 0
-#define MRST_PRESSURE_NOMINAL 50
-#define MRST_PRESSURE_MAX 100
-
-#define WAIT_ADC_COMPLETION 10 /* msec */
-
-/* PMIC ADC round robin delays */
-#define ADC_LOOP_DELAY0 0x0 /* Continuous loop */
-#define ADC_LOOP_DELAY1 0x1 /* 4.5 ms approximate */
-
-/* PMIC Vendor Identifiers */
-#define PMIC_VENDOR_FS 0 /* PMIC vendor FreeScale */
-#define PMIC_VENDOR_MAXIM 1 /* PMIC vendor MAXIM */
-#define PMIC_VENDOR_NEC 2 /* PMIC vendor NEC */
-#define MRSTOUCH_MAX_CHANNELS 32 /* Maximum ADC channels */
-
-/* Touch screen device structure */
-struct mrstouch_dev {
- struct device *dev; /* device associated with touch screen */
- struct input_dev *input;
- char phys[32];
- u16 asr; /* Address selection register */
- int irq;
- unsigned int vendor; /* PMIC vendor */
- unsigned int rev; /* PMIC revision */
-
- int (*read_prepare)(struct mrstouch_dev *tsdev);
- int (*read)(struct mrstouch_dev *tsdev, u16 *x, u16 *y, u16 *z);
- int (*read_finish)(struct mrstouch_dev *tsdev);
-};
-
-
-/*************************** NEC and Maxim Interface ************************/
-
-static int mrstouch_nec_adc_read_prepare(struct mrstouch_dev *tsdev)
-{
- return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0, 0x20);
-}
-
-/*
- * Enables PENDET interrupt.
- */
-static int mrstouch_nec_adc_read_finish(struct mrstouch_dev *tsdev)
-{
- int err;
-
- err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x20, 0x20);
- if (!err)
- err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, 0, 0x05);
-
- return err;
-}
-
-/*
- * Reads PMIC ADC touch screen result
- * Reads ADC storage registers for higher 7 and lower 3 bits and
- * converts the two readings into a single value and turns off gain bit
- */
-static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm)
-{
- int err;
- u16 result;
- u32 res;
-
- result = PMIC_REG_ADCSNS0H + offset;
-
- if (chan == MRST_TS_CHAN12)
- result += 4;
-
- err = intel_scu_ipc_ioread32(result, &res);
- if (err)
- return err;
-
- /* Mash the bits up */
-
- *vp = (res & 0xFF) << 3; /* Highest 7 bits */
- *vp |= (res >> 8) & 0x07; /* Lower 3 bits */
- *vp &= 0x3FF;
-
- res >>= 16;
-
- *vm = (res & 0xFF) << 3; /* Highest 7 bits */
- *vm |= (res >> 8) & 0x07; /* Lower 3 bits */
- *vm &= 0x3FF;
-
- return 0;
-}
-
-/*
- * Enables X, Y and Z bias values
- * Enables YPYM for X channels and XPXM for Y channels
- */
-static int mrstouch_ts_bias_set(uint offset, uint bias)
-{
- int count;
- u16 chan, start;
- u16 reg[4];
- u8 data[4];
-
- chan = PMICADDR0 + offset;
- start = MRST_TS_CHAN10;
-
- for (count = 0; count <= 3; count++) {
- reg[count] = chan++;
- data[count] = bias | (start + count);
- }
-
- return intel_scu_ipc_writev(reg, data, 4);
-}
-
-/* To read touch screen channel values */
-static int mrstouch_nec_adc_read(struct mrstouch_dev *tsdev,
- u16 *x, u16 *y, u16 *z)
-{
- int err;
- u16 xm, ym, zm;
-
- /* configure Y bias for X channels */
- err = mrstouch_ts_bias_set(tsdev->asr, MRST_YBIAS);
- if (err)
- goto ipc_error;
-
- msleep(WAIT_ADC_COMPLETION);
-
- /* read x+ and x- channels */
- err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, x, &xm);
- if (err)
- goto ipc_error;
-
- /* configure x bias for y channels */
- err = mrstouch_ts_bias_set(tsdev->asr, MRST_XBIAS);
- if (err)
- goto ipc_error;
-
- msleep(WAIT_ADC_COMPLETION);
-
- /* read y+ and y- channels */
- err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, y, &ym);
- if (err)
- goto ipc_error;
-
- /* configure z bias for x and y channels */
- err = mrstouch_ts_bias_set(tsdev->asr, MRST_ZBIAS);
- if (err)
- goto ipc_error;
-
- msleep(WAIT_ADC_COMPLETION);
-
- /* read z+ and z- channels */
- err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, z, &zm);
- if (err)
- goto ipc_error;
-
- return 0;
-
-ipc_error:
- dev_err(tsdev->dev, "ipc error during adc read\n");
- return err;
-}
-
-
-/*************************** Freescale Interface ************************/
-
-static int mrstouch_fs_adc_read_prepare(struct mrstouch_dev *tsdev)
-{
- int err, count;
- u16 chan;
- u16 reg[5];
- u8 data[5];
-
- /* Stop the ADC */
- err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02);
- if (err)
- goto ipc_error;
-
- chan = PMICADDR0 + tsdev->asr;
-
- /* Set X BIAS */
- for (count = 0; count <= 3; count++) {
- reg[count] = chan++;
- data[count] = 0x2A;
- }
- reg[count] = chan++; /* Dummy */
- data[count] = 0;
-
- err = intel_scu_ipc_writev(reg, data, 5);
- if (err)
- goto ipc_error;
-
- msleep(WAIT_ADC_COMPLETION);
-
- /* Set Y BIAS */
- for (count = 0; count <= 3; count++) {
- reg[count] = chan++;
- data[count] = 0x4A;
- }
- reg[count] = chan++; /* Dummy */
- data[count] = 0;
-
- err = intel_scu_ipc_writev(reg, data, 5);
- if (err)
- goto ipc_error;
-
- msleep(WAIT_ADC_COMPLETION);
-
- /* Set Z BIAS */
- err = intel_scu_ipc_iowrite32(chan + 2, 0x8A8A8A8A);
- if (err)
- goto ipc_error;
-
- msleep(WAIT_ADC_COMPLETION);
-
- return 0;
-
-ipc_error:
- dev_err(tsdev->dev, "ipc error during %s\n", __func__);
- return err;
-}
-
-static int mrstouch_fs_adc_read(struct mrstouch_dev *tsdev,
- u16 *x, u16 *y, u16 *z)
-{
- int err;
- u16 result;
- u16 reg[4];
- u8 data[4];
-
- result = PMIC_REG_ADCSNS0H + tsdev->asr;
-
- reg[0] = result + 4;
- reg[1] = result + 5;
- reg[2] = result + 16;
- reg[3] = result + 17;
-
- err = intel_scu_ipc_readv(reg, data, 4);
- if (err)
- goto ipc_error;
-
- *x = data[0] << 3; /* Higher 7 bits */
- *x |= data[1] & 0x7; /* Lower 3 bits */
- *x &= 0x3FF;
-
- *y = data[2] << 3; /* Higher 7 bits */
- *y |= data[3] & 0x7; /* Lower 3 bits */
- *y &= 0x3FF;
-
- /* Read Z value */
- reg[0] = result + 28;
- reg[1] = result + 29;
-
- err = intel_scu_ipc_readv(reg, data, 4);
- if (err)
- goto ipc_error;
-
- *z = data[0] << 3; /* Higher 7 bits */
- *z |= data[1] & 0x7; /* Lower 3 bits */
- *z &= 0x3FF;
-
- return 0;
-
-ipc_error:
- dev_err(tsdev->dev, "ipc error during %s\n", __func__);
- return err;
-}
-
-static int mrstouch_fs_adc_read_finish(struct mrstouch_dev *tsdev)
-{
- int err, count;
- u16 chan;
- u16 reg[5];
- u8 data[5];
-
- /* Clear all TS channels */
- chan = PMICADDR0 + tsdev->asr;
- for (count = 0; count <= 4; count++) {
- reg[count] = chan++;
- data[count] = 0;
- }
- err = intel_scu_ipc_writev(reg, data, 5);
- if (err)
- goto ipc_error;
-
- for (count = 0; count <= 4; count++) {
- reg[count] = chan++;
- data[count] = 0;
- }
- err = intel_scu_ipc_writev(reg, data, 5);
- if (err)
- goto ipc_error;
-
- err = intel_scu_ipc_iowrite32(chan + 2, 0x00000000);
- if (err)
- goto ipc_error;
-
- /* Start ADC */
- err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02);
- if (err)
- goto ipc_error;
-
- return 0;
-
-ipc_error:
- dev_err(tsdev->dev, "ipc error during %s\n", __func__);
- return err;
-}
-
-static void mrstouch_report_event(struct input_dev *input,
- unsigned int x, unsigned int y, unsigned int z)
-{
- if (z > MRST_PRESSURE_NOMINAL) {
- /* Pen touched, report button touch and coordinates */
- input_report_key(input, BTN_TOUCH, 1);
- input_report_abs(input, ABS_X, x);
- input_report_abs(input, ABS_Y, y);
- } else {
- input_report_key(input, BTN_TOUCH, 0);
- }
-
- input_report_abs(input, ABS_PRESSURE, z);
- input_sync(input);
-}
-
-/* PENDET interrupt handler */
-static irqreturn_t mrstouch_pendet_irq(int irq, void *dev_id)
-{
- struct mrstouch_dev *tsdev = dev_id;
- u16 x, y, z;
-
- /*
- * Should we lower thread priority? Probably not, since we are
- * not spinning but sleeping...
- */
-
- if (tsdev->read_prepare(tsdev))
- goto out;
-
- do {
- if (tsdev->read(tsdev, &x, &y, &z))
- break;
-
- mrstouch_report_event(tsdev->input, x, y, z);
- } while (z > MRST_PRESSURE_NOMINAL);
-
- tsdev->read_finish(tsdev);
-
-out:
- return IRQ_HANDLED;
-}
-
-/* Utility to read PMIC ID */
-static int mrstouch_read_pmic_id(uint *vendor, uint *rev)
-{
- int err;
- u8 r;
-
- err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r);
- if (err)
- return err;
-
- *vendor = r & 0x7;
- *rev = (r >> 3) & 0x7;
-
- return 0;
-}
-
-/*
- * Parse ADC channels to find end of the channel configured by other ADC user
- * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels
- */
-static int mrstouch_chan_parse(struct mrstouch_dev *tsdev)
-{
- int found = 0;
- int err, i;
- u8 r8;
-
- for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) {
- err = intel_scu_ipc_ioread8(PMICADDR0 + i, &r8);
- if (err)
- return err;
-
- if (r8 == END_OF_CHANNEL) {
- found = i;
- break;
- }
- }
-
- if (tsdev->vendor == PMIC_VENDOR_FS) {
- if (found > MRSTOUCH_MAX_CHANNELS - 18)
- return -ENOSPC;
- } else {
- if (found > MRSTOUCH_MAX_CHANNELS - 4)
- return -ENOSPC;
- }
-
- return found;
-}
-
-
-/*
- * Writes touch screen channels to ADC address selection registers
- */
-static int mrstouch_ts_chan_set(uint offset)
-{
- u16 chan;
-
- int ret, count;
-
- chan = PMICADDR0 + offset;
- for (count = 0; count <= 3; count++) {
- ret = intel_scu_ipc_iowrite8(chan++, MRST_TS_CHAN10 + count);
- if (ret)
- return ret;
- }
- return intel_scu_ipc_iowrite8(chan++, END_OF_CHANNEL);
-}
-
-/* Initialize ADC */
-static int mrstouch_adc_init(struct mrstouch_dev *tsdev)
-{
- int err, start;
- u8 ra, rm;
-
- err = mrstouch_read_pmic_id(&tsdev->vendor, &tsdev->rev);
- if (err) {
- dev_err(tsdev->dev, "Unable to read PMIC id\n");
- return err;
- }
-
- switch (tsdev->vendor) {
- case PMIC_VENDOR_NEC:
- case PMIC_VENDOR_MAXIM:
- tsdev->read_prepare = mrstouch_nec_adc_read_prepare;
- tsdev->read = mrstouch_nec_adc_read;
- tsdev->read_finish = mrstouch_nec_adc_read_finish;
- break;
-
- case PMIC_VENDOR_FS:
- tsdev->read_prepare = mrstouch_fs_adc_read_prepare;
- tsdev->read = mrstouch_fs_adc_read;
- tsdev->read_finish = mrstouch_fs_adc_read_finish;
- break;
-
- default:
- dev_err(tsdev->dev,
- "Unsupported touchscreen: %d\n", tsdev->vendor);
- return -ENXIO;
- }
-
- start = mrstouch_chan_parse(tsdev);
- if (start < 0) {
- dev_err(tsdev->dev, "Unable to parse channels\n");
- return start;
- }
-
- tsdev->asr = start;
-
- /*
- * ADC power on, start, enable PENDET and set loop delay
- * ADC loop delay is set to 4.5 ms approximately
- * Loop delay more than this results in jitter in adc readings
- * Setting loop delay to 0 (continuous loop) in MAXIM stops PENDET
- * interrupt generation sometimes.
- */
-
- if (tsdev->vendor == PMIC_VENDOR_FS) {
- ra = 0xE0 | ADC_LOOP_DELAY0;
- rm = 0x5;
- } else {
- /* NEC and MAXIm not consistent with loop delay 0 */
- ra = 0xE0 | ADC_LOOP_DELAY1;
- rm = 0x0;
-
- /* configure touch screen channels */
- err = mrstouch_ts_chan_set(tsdev->asr);
- if (err)
- return err;
- }
-
- err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7);
- if (err)
- return err;
-
- err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03);
- if (err)
- return err;
-
- return 0;
-}
-
-
-/* Probe function for touch screen driver */
-static int mrstouch_probe(struct platform_device *pdev)
-{
- struct mrstouch_dev *tsdev;
- struct input_dev *input;
- int err;
- int irq;
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "no interrupt assigned\n");
- return -EINVAL;
- }
-
- tsdev = devm_kzalloc(&pdev->dev, sizeof(struct mrstouch_dev),
- GFP_KERNEL);
- if (!tsdev) {
- dev_err(&pdev->dev, "unable to allocate memory\n");
- return -ENOMEM;
- }
-
- input = devm_input_allocate_device(&pdev->dev);
- if (!input) {
- dev_err(&pdev->dev, "unable to allocate input device\n");
- return -ENOMEM;
- }
-
- tsdev->dev = &pdev->dev;
- tsdev->input = input;
- tsdev->irq = irq;
-
- snprintf(tsdev->phys, sizeof(tsdev->phys),
- "%s/input0", dev_name(tsdev->dev));
-
- err = mrstouch_adc_init(tsdev);
- if (err) {
- dev_err(&pdev->dev, "ADC initialization failed\n");
- return err;
- }
-
- input->name = "mrst_touchscreen";
- input->phys = tsdev->phys;
- input->dev.parent = tsdev->dev;
-
- input->id.vendor = tsdev->vendor;
- input->id.version = tsdev->rev;
-
- input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
- input_set_abs_params(tsdev->input, ABS_X,
- MRST_X_MIN, MRST_X_MAX, MRST_X_FUZZ, 0);
- input_set_abs_params(tsdev->input, ABS_Y,
- MRST_Y_MIN, MRST_Y_MAX, MRST_Y_FUZZ, 0);
- input_set_abs_params(tsdev->input, ABS_PRESSURE,
- MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0);
-
- err = devm_request_threaded_irq(&pdev->dev, tsdev->irq, NULL,
- mrstouch_pendet_irq, IRQF_ONESHOT,
- "mrstouch", tsdev);
- if (err) {
- dev_err(tsdev->dev, "unable to allocate irq\n");
- return err;
- }
-
- err = input_register_device(tsdev->input);
- if (err) {
- dev_err(tsdev->dev, "unable to register input device\n");
- return err;
- }
-
- return 0;
-}
-
-static struct platform_driver mrstouch_driver = {
- .driver = {
- .name = "pmic_touch",
- },
- .probe = mrstouch_probe,
-};
-module_platform_driver(mrstouch_driver);
-
-MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com");
-MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c
index 7fbb3b0c8571..e0baa7de4102 100644
--- a/drivers/input/touchscreen/lpc32xx_ts.c
+++ b/drivers/input/touchscreen/lpc32xx_ts.c
@@ -313,7 +313,6 @@ static int lpc32xx_ts_remove(struct platform_device *pdev)
struct lpc32xx_tsc *tsc = platform_get_drvdata(pdev);
struct resource *res;
- device_init_wakeup(&pdev->dev, 0);
free_irq(tsc->irq, tsc);
input_unregister_device(tsc->dev);
diff --git a/drivers/input/touchscreen/max11801_ts.c b/drivers/input/touchscreen/max11801_ts.c
index 82079cde849c..a595ae5284e3 100644
--- a/drivers/input/touchscreen/max11801_ts.c
+++ b/drivers/input/touchscreen/max11801_ts.c
@@ -199,7 +199,6 @@ static int max11801_ts_probe(struct i2c_client *client,
__set_bit(BTN_TOUCH, input_dev->keybit);
input_set_abs_params(input_dev, ABS_X, 0, MAX11801_MAX_X, 0, 0);
input_set_abs_params(input_dev, ABS_Y, 0, MAX11801_MAX_Y, 0, 0);
- input_set_drvdata(input_dev, data);
max11801_ts_phy_init(data);
@@ -216,7 +215,6 @@ static int max11801_ts_probe(struct i2c_client *client,
if (error)
return error;
- i2c_set_clientdata(client, data);
return 0;
}
diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c
index 8b47e1fecb25..90fc07dc98a6 100644
--- a/drivers/input/touchscreen/mcs5000_ts.c
+++ b/drivers/input/touchscreen/mcs5000_ts.c
@@ -221,7 +221,6 @@ static int mcs5000_ts_probe(struct i2c_client *client,
input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0);
input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
- input_set_drvdata(input_dev, data);
data->input_dev = input_dev;
if (pdata->cfg_pin)
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 3bb0637d832e..37ff672c7802 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -461,7 +461,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
if (error)
return error;
} else {
- dev_err(&client->dev, "platform data not defined\n");
+ dev_err(dev, "platform data not defined\n");
return -EINVAL;
}
@@ -483,7 +483,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
input->id.bustype = BUS_I2C;
input->open = pixcir_input_open;
input->close = pixcir_input_close;
- input->dev.parent = &client->dev;
+ input->dev.parent = dev;
if (pdata) {
input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0);
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 2658afa016c9..1252e49ccfa1 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -1087,8 +1087,6 @@ static int raydium_i2c_probe(struct i2c_client *client,
ts->input->name = "Raydium Touchscreen";
ts->input->id.bustype = BUS_I2C;
- input_set_drvdata(ts->input, ts);
-
input_set_abs_params(ts->input, ABS_MT_POSITION_X,
0, le16_to_cpu(ts->info.x_max), 0, 0);
input_set_abs_params(ts->input, ABS_MT_POSITION_Y,
diff --git a/drivers/input/touchscreen/rohm_bu21023.c b/drivers/input/touchscreen/rohm_bu21023.c
index 611156a2ef80..eeaf6ff03597 100644
--- a/drivers/input/touchscreen/rohm_bu21023.c
+++ b/drivers/input/touchscreen/rohm_bu21023.c
@@ -1189,8 +1189,7 @@ static int rohm_bu21023_i2c_probe(struct i2c_client *client,
error = devm_add_action(dev, rohm_ts_remove_sysfs_group, dev);
if (error) {
rohm_ts_remove_sysfs_group(dev);
- dev_err(&client->dev,
- "Failed to add sysfs cleanup action: %d\n",
+ dev_err(dev, "Failed to add sysfs cleanup action: %d\n",
error);
return error;
}
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index a4a103e1d11b..41d58e88cc8a 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -250,7 +250,7 @@ static int s3c2410ts_probe(struct platform_device *pdev)
ts.dev = dev;
- info = dev_get_platdata(&pdev->dev);
+ info = dev_get_platdata(dev);
if (!info) {
dev_err(dev, "no platform data, cannot attach\n");
return -EINVAL;
diff --git a/drivers/input/touchscreen/sis_i2c.c b/drivers/input/touchscreen/sis_i2c.c
index 8d93f8c9a403..67c2563031d6 100644
--- a/drivers/input/touchscreen/sis_i2c.c
+++ b/drivers/input/touchscreen/sis_i2c.c
@@ -316,7 +316,6 @@ static int sis_ts_probe(struct i2c_client *client,
return -ENOMEM;
ts->client = client;
- i2c_set_clientdata(client, ts);
ts->attn_gpio = devm_gpiod_get_optional(&client->dev,
"attn", GPIOD_IN);
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index e943678ce54c..be5615c6bf8f 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -237,7 +237,6 @@ static int st1232_ts_remove(struct i2c_client *client)
{
struct st1232_ts_data *ts = i2c_get_clientdata(client);
- device_init_wakeup(&client->dev, 0);
st1232_ts_power(ts, false);
return 0;
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
index 642f4a53de50..ed29db3ec731 100644
--- a/drivers/input/touchscreen/sx8654.c
+++ b/drivers/input/touchscreen/sx8654.c
@@ -253,7 +253,6 @@ static int sx8654_probe(struct i2c_client *client,
if (error)
return error;
- i2c_set_clientdata(client, sx8654);
return 0;
}
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index f2c5f0e47f77..e02b69f40ad8 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -18,8 +18,9 @@
* GNU General Public License for more details.
*/
-#include <linux/module.h>
#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of.h>
#include <linux/spi/spi.h>
#include <linux/regmap.h>
#include "tsc200x-core.h"
@@ -77,9 +78,18 @@ static int tsc2005_remove(struct spi_device *spi)
return tsc200x_remove(&spi->dev);
}
+#ifdef CONFIG_OF
+static const struct of_device_id tsc2005_of_match[] = {
+ { .compatible = "ti,tsc2005" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tsc2005_of_match);
+#endif
+
static struct spi_driver tsc2005_driver = {
.driver = {
.name = "tsc2005",
+ .of_match_table = of_match_ptr(tsc2005_of_match),
.pm = &tsc200x_pm_ops,
},
.probe = tsc2005_probe,
diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
index b7059ed8872e..88ea5e1b72ae 100644
--- a/drivers/input/touchscreen/tsc200x-core.c
+++ b/drivers/input/touchscreen/tsc200x-core.c
@@ -27,7 +27,6 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/of.h>
-#include <linux/spi/tsc2005.h>
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
#include <linux/gpio/consumer.h>
@@ -114,7 +113,6 @@ struct tsc200x {
struct regulator *vio;
struct gpio_desc *reset_gpio;
- void (*set_reset)(bool enable);
int (*tsc200x_cmd)(struct device *dev, u8 cmd);
int irq;
};
@@ -227,12 +225,13 @@ static void tsc200x_stop_scan(struct tsc200x *ts)
ts->tsc200x_cmd(ts->dev, TSC200X_CMD_STOP);
}
-static void tsc200x_set_reset(struct tsc200x *ts, bool enable)
+static void tsc200x_reset(struct tsc200x *ts)
{
- if (ts->reset_gpio)
- gpiod_set_value_cansleep(ts->reset_gpio, enable);
- else if (ts->set_reset)
- ts->set_reset(enable);
+ if (ts->reset_gpio) {
+ gpiod_set_value_cansleep(ts->reset_gpio, 1);
+ usleep_range(100, 500); /* only 10us required */
+ gpiod_set_value_cansleep(ts->reset_gpio, 0);
+ }
}
/* must be called with ts->mutex held */
@@ -253,7 +252,7 @@ static void __tsc200x_enable(struct tsc200x *ts)
{
tsc200x_start_scan(ts);
- if (ts->esd_timeout && (ts->set_reset || ts->reset_gpio)) {
+ if (ts->esd_timeout && ts->reset_gpio) {
ts->last_valid_interrupt = jiffies;
schedule_delayed_work(&ts->esd_work,
round_jiffies_relative(
@@ -310,9 +309,7 @@ static ssize_t tsc200x_selftest_show(struct device *dev,
}
/* hardware reset */
- tsc200x_set_reset(ts, false);
- usleep_range(100, 500); /* only 10us required */
- tsc200x_set_reset(ts, true);
+ tsc200x_reset(ts);
if (!success)
goto out;
@@ -354,7 +351,7 @@ static umode_t tsc200x_attr_is_visible(struct kobject *kobj,
umode_t mode = attr->mode;
if (attr == &dev_attr_selftest.attr) {
- if (!ts->set_reset && !ts->reset_gpio)
+ if (!ts->reset_gpio)
mode = 0;
}
@@ -404,9 +401,7 @@ static void tsc200x_esd_work(struct work_struct *work)
tsc200x_update_pen_state(ts, 0, 0, 0);
- tsc200x_set_reset(ts, false);
- usleep_range(100, 500); /* only 10us required */
- tsc200x_set_reset(ts, true);
+ tsc200x_reset(ts);
enable_irq(ts->irq);
tsc200x_start_scan(ts);
@@ -454,26 +449,12 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
struct regmap *regmap,
int (*tsc200x_cmd)(struct device *dev, u8 cmd))
{
- const struct tsc2005_platform_data *pdata = dev_get_platdata(dev);
- struct device_node *np = dev->of_node;
-
struct tsc200x *ts;
struct input_dev *input_dev;
- unsigned int max_x = MAX_12BIT;
- unsigned int max_y = MAX_12BIT;
- unsigned int max_p = MAX_12BIT;
- unsigned int fudge_x = TSC200X_DEF_X_FUZZ;
- unsigned int fudge_y = TSC200X_DEF_Y_FUZZ;
- unsigned int fudge_p = TSC200X_DEF_P_FUZZ;
- unsigned int x_plate_ohm = TSC200X_DEF_RESISTOR;
- unsigned int esd_timeout;
+ u32 x_plate_ohm;
+ u32 esd_timeout;
int error;
- if (!np && !pdata) {
- dev_err(dev, "no platform data\n");
- return -ENODEV;
- }
-
if (irq <= 0) {
dev_err(dev, "no irq\n");
return -ENODEV;
@@ -487,23 +468,6 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
return -ENODEV;
}
- if (pdata) {
- fudge_x = pdata->ts_x_fudge;
- fudge_y = pdata->ts_y_fudge;
- fudge_p = pdata->ts_pressure_fudge;
- max_x = pdata->ts_x_max;
- max_y = pdata->ts_y_max;
- max_p = pdata->ts_pressure_max;
- x_plate_ohm = pdata->ts_x_plate_ohm;
- esd_timeout = pdata->esd_timeout_ms;
- } else {
- x_plate_ohm = TSC200X_DEF_RESISTOR;
- of_property_read_u32(np, "ti,x-plate-ohms", &x_plate_ohm);
- esd_timeout = 0;
- of_property_read_u32(np, "ti,esd-recovery-timeout-ms",
- &esd_timeout);
- }
-
ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
if (!ts)
return -ENOMEM;
@@ -517,8 +481,13 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
ts->idev = input_dev;
ts->regmap = regmap;
ts->tsc200x_cmd = tsc200x_cmd;
- ts->x_plate_ohm = x_plate_ohm;
- ts->esd_timeout = esd_timeout;
+
+ error = device_property_read_u32(dev, "ti,x-plate-ohms", &x_plate_ohm);
+ ts->x_plate_ohm = error ? TSC200X_DEF_RESISTOR : x_plate_ohm;
+
+ error = device_property_read_u32(dev, "ti,esd-recovery-timeout-ms",
+ &esd_timeout);
+ ts->esd_timeout = error ? 0 : esd_timeout;
ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ts->reset_gpio)) {
@@ -527,16 +496,13 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
return error;
}
- ts->vio = devm_regulator_get_optional(dev, "vio");
+ ts->vio = devm_regulator_get(dev, "vio");
if (IS_ERR(ts->vio)) {
error = PTR_ERR(ts->vio);
- dev_err(dev, "vio regulator missing (%d)", error);
+ dev_err(dev, "error acquiring vio regulator: %d", error);
return error;
}
- if (!ts->reset_gpio && pdata)
- ts->set_reset = pdata->set_reset;
-
mutex_init(&ts->mutex);
spin_lock_init(&ts->lock);
@@ -559,22 +525,23 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
input_dev->phys = ts->phys;
input_dev->id = *tsc_id;
- input_dev->dev.parent = dev;
- input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
- input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
- input_set_abs_params(input_dev, ABS_X, 0, max_x, fudge_x, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, max_y, fudge_y, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
-
- if (np)
- touchscreen_parse_properties(input_dev, false, NULL);
input_dev->open = tsc200x_open;
input_dev->close = tsc200x_close;
input_set_drvdata(input_dev, ts);
+ input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+
+ input_set_abs_params(input_dev, ABS_X,
+ 0, MAX_12BIT, TSC200X_DEF_X_FUZZ, 0);
+ input_set_abs_params(input_dev, ABS_Y,
+ 0, MAX_12BIT, TSC200X_DEF_Y_FUZZ, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE,
+ 0, MAX_12BIT, TSC200X_DEF_P_FUZZ, 0);
+
+ touchscreen_parse_properties(input_dev, false, NULL);
+
/* Ensure the touchscreen is off */
tsc200x_stop_scan(ts);
@@ -587,12 +554,9 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
return error;
}
- /* enable regulator for DT */
- if (ts->vio) {
- error = regulator_enable(ts->vio);
- if (error)
- return error;
- }
+ error = regulator_enable(ts->vio);
+ if (error)
+ return error;
dev_set_drvdata(dev, ts);
error = sysfs_create_group(&dev->kobj, &tsc200x_attr_group);
@@ -615,8 +579,7 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
err_remove_sysfs:
sysfs_remove_group(&dev->kobj, &tsc200x_attr_group);
disable_regulator:
- if (ts->vio)
- regulator_disable(ts->vio);
+ regulator_disable(ts->vio);
return error;
}
EXPORT_SYMBOL_GPL(tsc200x_probe);
@@ -627,8 +590,7 @@ int tsc200x_remove(struct device *dev)
sysfs_remove_group(&dev->kobj, &tsc200x_attr_group);
- if (ts->vio)
- regulator_disable(ts->vio);
+ regulator_disable(ts->vio);
return 0;
}
diff --git a/drivers/input/touchscreen/zet6223.c b/drivers/input/touchscreen/zet6223.c
new file mode 100644
index 000000000000..19ffcc7b886c
--- /dev/null
+++ b/drivers/input/touchscreen/zet6223.c
@@ -0,0 +1,268 @@
+/*
+ * Copyright (C) 2016, Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <asm/unaligned.h>
+
+#define ZET6223_MAX_FINGERS 16
+#define ZET6223_MAX_PKT_SIZE (3 + 4 * ZET6223_MAX_FINGERS)
+
+#define ZET6223_CMD_INFO 0xB2
+#define ZET6223_CMD_INFO_LENGTH 17
+#define ZET6223_VALID_PACKET 0x3c
+
+#define ZET6223_POWER_ON_DELAY_MSEC 30
+
+struct zet6223_ts {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct regulator *vcc;
+ struct regulator *vio;
+ struct touchscreen_properties prop;
+ struct regulator_bulk_data supplies[2];
+ u16 max_x;
+ u16 max_y;
+ u8 fingernum;
+};
+
+static int zet6223_start(struct input_dev *dev)
+{
+ struct zet6223_ts *ts = input_get_drvdata(dev);
+
+ enable_irq(ts->client->irq);
+
+ return 0;
+}
+
+static void zet6223_stop(struct input_dev *dev)
+{
+ struct zet6223_ts *ts = input_get_drvdata(dev);
+
+ disable_irq(ts->client->irq);
+}
+
+static irqreturn_t zet6223_irq(int irq, void *dev_id)
+{
+ struct zet6223_ts *ts = dev_id;
+ u16 finger_bits;
+
+ /*
+ * First 3 bytes are an identifier, two bytes of finger data.
+ * X, Y data per finger is 4 bytes.
+ */
+ u8 bufsize = 3 + 4 * ts->fingernum;
+ u8 buf[ZET6223_MAX_PKT_SIZE];
+ int i;
+ int ret;
+ int error;
+
+ ret = i2c_master_recv(ts->client, buf, bufsize);
+ if (ret != bufsize) {
+ error = ret < 0 ? ret : -EIO;
+ dev_err_ratelimited(&ts->client->dev,
+ "Error reading input data: %d\n", error);
+ return IRQ_HANDLED;
+ }
+
+ if (buf[0] != ZET6223_VALID_PACKET)
+ return IRQ_HANDLED;
+
+ finger_bits = get_unaligned_be16(buf + 1);
+ for (i = 0; i < ts->fingernum; i++) {
+ if (!(finger_bits & BIT(15 - i)))
+ continue;
+
+ input_mt_slot(ts->input, i);
+ input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
+ input_event(ts->input, EV_ABS, ABS_MT_POSITION_X,
+ ((buf[i + 3] >> 4) << 8) + buf[i + 4]);
+ input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y,
+ ((buf[i + 3] & 0xF) << 8) + buf[i + 5]);
+ }
+
+ input_mt_sync_frame(ts->input);
+ input_sync(ts->input);
+
+ return IRQ_HANDLED;
+}
+
+static void zet6223_power_off(void *_ts)
+{
+ struct zet6223_ts *ts = _ts;
+
+ regulator_bulk_disable(ARRAY_SIZE(ts->supplies), ts->supplies);
+}
+
+static int zet6223_power_on(struct zet6223_ts *ts)
+{
+ struct device *dev = &ts->client->dev;
+ int error;
+
+ ts->supplies[0].supply = "vio";
+ ts->supplies[1].supply = "vcc";
+
+ error = devm_regulator_bulk_get(dev, ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (error)
+ return error;
+
+ error = regulator_bulk_enable(ARRAY_SIZE(ts->supplies), ts->supplies);
+ if (error)
+ return error;
+
+ msleep(ZET6223_POWER_ON_DELAY_MSEC);
+
+ error = devm_add_action_or_reset(dev, zet6223_power_off, ts);
+ if (error) {
+ dev_err(dev, "failed to install poweroff action: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int zet6223_query_device(struct zet6223_ts *ts)
+{
+ u8 buf[ZET6223_CMD_INFO_LENGTH];
+ u8 cmd = ZET6223_CMD_INFO;
+ int ret;
+ int error;
+
+ ret = i2c_master_send(ts->client, &cmd, sizeof(cmd));
+ if (ret != sizeof(cmd)) {
+ error = ret < 0 ? ret : -EIO;
+ dev_err(&ts->client->dev,
+ "touchpanel info cmd failed: %d\n", error);
+ return error;
+ }
+
+ ret = i2c_master_recv(ts->client, buf, sizeof(buf));
+ if (ret != sizeof(buf)) {
+ error = ret < 0 ? ret : -EIO;
+ dev_err(&ts->client->dev,
+ "failed to retrieve touchpanel info: %d\n", error);
+ return error;
+ }
+
+ ts->fingernum = buf[15] & 0x7F;
+ if (ts->fingernum > ZET6223_MAX_FINGERS) {
+ dev_warn(&ts->client->dev,
+ "touchpanel reports %d fingers, limiting to %d\n",
+ ts->fingernum, ZET6223_MAX_FINGERS);
+ ts->fingernum = ZET6223_MAX_FINGERS;
+ }
+
+ ts->max_x = get_unaligned_le16(&buf[8]);
+ ts->max_y = get_unaligned_le16(&buf[10]);
+
+ return 0;
+}
+
+static int zet6223_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct zet6223_ts *ts;
+ struct input_dev *input;
+ int error;
+
+ if (!client->irq) {
+ dev_err(dev, "no irq specified\n");
+ return -EINVAL;
+ }
+
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ ts->client = client;
+
+ error = zet6223_power_on(ts);
+ if (error)
+ return error;
+
+ error = zet6223_query_device(ts);
+ if (error)
+ return error;
+
+ ts->input = input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
+
+ input_set_drvdata(input, ts);
+
+ input->name = client->name;
+ input->id.bustype = BUS_I2C;
+ input->open = zet6223_start;
+ input->close = zet6223_stop;
+
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, ts->max_x, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ts->max_y, 0, 0);
+
+ touchscreen_parse_properties(input, true, &ts->prop);
+
+ error = input_mt_init_slots(input, ts->fingernum,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error)
+ return error;
+
+ error = devm_request_threaded_irq(dev, client->irq, NULL, zet6223_irq,
+ IRQF_ONESHOT, client->name, ts);
+ if (error) {
+ dev_err(dev, "failed to request irq %d: %d\n",
+ client->irq, error);
+ return error;
+ }
+
+ zet6223_stop(input);
+
+ error = input_register_device(input);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static const struct of_device_id zet6223_of_match[] = {
+ { .compatible = "zeitec,zet6223" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, zet6223_of_match);
+
+static const struct i2c_device_id zet6223_id[] = {
+ { "zet6223", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, zet6223_id);
+
+static struct i2c_driver zet6223_driver = {
+ .driver = {
+ .name = "zet6223",
+ .of_match_table = zet6223_of_match,
+ },
+ .probe = zet6223_probe,
+ .id_table = zet6223_id
+};
+module_i2c_driver(zet6223_driver);
+
+MODULE_AUTHOR("Jelle van der Waa <jelle@vdwaa.nl>");
+MODULE_DESCRIPTION("ZEITEC zet622x I2C touchscreen driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/i2c/mpr121_touchkey.h b/include/linux/i2c/mpr121_touchkey.h
deleted file mode 100644
index f0bcc38bbb97..000000000000
--- a/include/linux/i2c/mpr121_touchkey.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Header file for Freescale MPR121 Capacitive Touch Sensor */
-
-#ifndef _MPR121_TOUCHKEY_H
-#define _MPR121_TOUCHKEY_H
-
-/**
- * struct mpr121_platform_data - platform data for mpr121 sensor
- * @keymap: pointer to array of KEY_* values representing keymap
- * @keymap_size: size of the keymap
- * @wakeup: configure the button as a wake-up source
- * @vdd_uv: VDD voltage in uV
- */
-struct mpr121_platform_data {
- const unsigned short *keymap;
- unsigned int keymap_size;
- bool wakeup;
- int vdd_uv;
-};
-
-#endif /* _MPR121_TOUCHKEY_H */
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
index 27e06acc509a..37b04a0fdea4 100644
--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -80,24 +80,9 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
unsigned int rows, unsigned int cols,
unsigned short *keymap,
struct input_dev *input_dev);
+int matrix_keypad_parse_properties(struct device *dev,
+ unsigned int *rows, unsigned int *cols);
-#ifdef CONFIG_OF
-/**
- * matrix_keypad_parse_of_params() - Read parameters from matrix-keypad node
- *
- * @dev: Device containing of_node
- * @rows: Returns number of matrix rows
- * @cols: Returns number of matrix columns
- * @return 0 if OK, <0 on error
- */
-int matrix_keypad_parse_of_params(struct device *dev,
- unsigned int *rows, unsigned int *cols);
-#else
-static inline int matrix_keypad_parse_of_params(struct device *dev,
- unsigned int *rows, unsigned int *cols)
-{
- return -ENOSYS;
-}
-#endif /* CONFIG_OF */
+#define matrix_keypad_parse_of_params matrix_keypad_parse_properties
#endif /* _MATRIX_KEYPAD_H */
diff --git a/include/linux/input/tca8418_keypad.h b/include/linux/input/tca8418_keypad.h
deleted file mode 100644
index e71a85dc2cbd..000000000000
--- a/include/linux/input/tca8418_keypad.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * TCA8418 keypad platform support
- *
- * Copyright (C) 2011 Fuel7, Inc. All rights reserved.
- *
- * Author: Kyle Manna <kyle.manna@fuel7.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License v2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 021110-1307, USA.
- *
- * If you can't comply with GPLv2, alternative licensing terms may be
- * arranged. Please contact Fuel7, Inc. (http://fuel7.com/) for proprietary
- * alternative licensing inquiries.
- */
-
-#ifndef _TCA8418_KEYPAD_H
-#define _TCA8418_KEYPAD_H
-
-#include <linux/types.h>
-#include <linux/input/matrix_keypad.h>
-
-#define TCA8418_I2C_ADDR 0x34
-#define TCA8418_NAME "tca8418_keypad"
-
-struct tca8418_keypad_platform_data {
- const struct matrix_keymap_data *keymap_data;
- unsigned rows;
- unsigned cols;
- bool rep;
- bool irq_is_gpio;
-};
-
-#endif
diff --git a/include/linux/spi/tsc2005.h b/include/linux/spi/tsc2005.h
deleted file mode 100644
index 563b3b1799a8..000000000000
--- a/include/linux/spi/tsc2005.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is part of TSC2005 touchscreen driver
- *
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _LINUX_SPI_TSC2005_H
-#define _LINUX_SPI_TSC2005_H
-
-#include <linux/types.h>
-
-struct tsc2005_platform_data {
- int ts_pressure_max;
- int ts_pressure_fudge;
- int ts_x_max;
- int ts_x_fudge;
- int ts_y_max;
- int ts_y_fudge;
- int ts_x_plate_ohm;
- unsigned int esd_timeout_ms;
- void (*set_reset)(bool enable);
-};
-
-#endif
diff --git a/include/uapi/linux/serio.h b/include/uapi/linux/serio.h
index f2447a83ac8d..ccd0ccd00f47 100644
--- a/include/uapi/linux/serio.h
+++ b/include/uapi/linux/serio.h
@@ -17,9 +17,10 @@
/*
* bit masks for use in "interrupt" flags (3rd argument)
*/
-#define SERIO_TIMEOUT 1
-#define SERIO_PARITY 2
-#define SERIO_FRAME 4
+#define SERIO_TIMEOUT BIT(0)
+#define SERIO_PARITY BIT(1)
+#define SERIO_FRAME BIT(2)
+#define SERIO_OOB_DATA BIT(3)
/*
* Serio types