summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-02-03 07:58:57 +1100
committerLinus Torvalds <torvalds@linux-foundation.org>2008-02-03 07:58:57 +1100
commit9135f1901ee6449dfe338adf6e40e9c2025b8150 (patch)
tree05e1ab38563a93cf0df8c05d21062b85b14f8491
parent124d3b7041f9a0ca7c43a6293e1cae4576c32fd5 (diff)
parentd59823fa44f7d9babf586b3c705db314aa0f9822 (diff)
downloadlinux-9135f1901ee6449dfe338adf6e40e9c2025b8150.tar.bz2
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (95 commits) ide-tape: remove idetape_config_t typedef ide-tape: remove mtio.h related comments ide-tape: make function name more accurate ide-tape: remove unused sense packet commands. ide-tape: use generic byteorder macros ide-tape: remove EXPERIMENTAL driver status ide-tape: use generic scsi commands ide-tape: remove struct idetape_block_size_page_t ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t ide-tape: remove struct idetape_parameter_block_descriptor_t ide-tape: remove struct idetape_medium_partition_page_t ide-tape: remove struct idetape_data_compression_page_t ide-tape: remove struct idetape_inquiry_result_t ide-tape: remove struct idetape_capabilities_page_t ide-tape: remove IDETAPE_DEBUG_BUGS ide-tape: remove IDETAPE_DEBUG_INFO ide-tape: dump gcw fields on error in idetape_identify_device() ide-tape: remove struct idetape_mode_parameter_header_t ide-tape: remove struct idetape_request_sense_result_t ide-tape: remove dead code ...
-rw-r--r--Documentation/ide/ChangeLog.ide-tape.1995-2002257
-rw-r--r--Documentation/ide/ide-tape.txt146
-rw-r--r--drivers/ide/Kconfig3
-rw-r--r--drivers/ide/arm/bast-ide.c20
-rw-r--r--drivers/ide/arm/icside.c25
-rw-r--r--drivers/ide/arm/ide_arm.c2
-rw-r--r--drivers/ide/arm/rapide.c4
-rw-r--r--drivers/ide/cris/ide-cris.c24
-rw-r--r--drivers/ide/h8300/ide-h8300.c2
-rw-r--r--drivers/ide/ide-acpi.c63
-rw-r--r--drivers/ide/ide-cd.c2
-rw-r--r--drivers/ide/ide-dma.c20
-rw-r--r--drivers/ide/ide-floppy.c1438
-rw-r--r--drivers/ide/ide-generic.c2
-rw-r--r--drivers/ide/ide-iops.c109
-rw-r--r--drivers/ide/ide-pnp.c9
-rw-r--r--drivers/ide/ide-probe.c278
-rw-r--r--drivers/ide/ide-proc.c7
-rw-r--r--drivers/ide/ide-tape.c1240
-rw-r--r--drivers/ide/ide-taskfile.c11
-rw-r--r--drivers/ide/ide.c77
-rw-r--r--drivers/ide/legacy/ali14xx.c24
-rw-r--r--drivers/ide/legacy/buddha.c2
-rw-r--r--drivers/ide/legacy/dtc2278.c36
-rw-r--r--drivers/ide/legacy/falconide.c2
-rw-r--r--drivers/ide/legacy/gayle.c2
-rw-r--r--drivers/ide/legacy/ht6560b.c48
-rw-r--r--drivers/ide/legacy/ide-cs.c29
-rw-r--r--drivers/ide/legacy/ide_platform.c4
-rw-r--r--drivers/ide/legacy/macide.c12
-rw-r--r--drivers/ide/legacy/q40ide.c2
-rw-r--r--drivers/ide/legacy/qd65xx.c67
-rw-r--r--drivers/ide/legacy/umc8672.c24
-rw-r--r--drivers/ide/mips/au1xxx-ide.c37
-rw-r--r--drivers/ide/mips/swarm.c2
-rw-r--r--drivers/ide/pci/aec62xx.c26
-rw-r--r--drivers/ide/pci/alim15x3.c6
-rw-r--r--drivers/ide/pci/amd74xx.c21
-rw-r--r--drivers/ide/pci/atiixp.c30
-rw-r--r--drivers/ide/pci/cmd640.c33
-rw-r--r--drivers/ide/pci/cmd64x.c6
-rw-r--r--drivers/ide/pci/cs5520.c12
-rw-r--r--drivers/ide/pci/cs5530.c8
-rw-r--r--drivers/ide/pci/cs5535.c10
-rw-r--r--drivers/ide/pci/cy82c693.c1
-rw-r--r--drivers/ide/pci/delkin_cb.c41
-rw-r--r--drivers/ide/pci/generic.c7
-rw-r--r--drivers/ide/pci/hpt34x.c7
-rw-r--r--drivers/ide/pci/hpt366.c89
-rw-r--r--drivers/ide/pci/it8213.c24
-rw-r--r--drivers/ide/pci/it821x.c8
-rw-r--r--drivers/ide/pci/jmicron.c9
-rw-r--r--drivers/ide/pci/ns87415.c4
-rw-r--r--drivers/ide/pci/opti621.c15
-rw-r--r--drivers/ide/pci/pdc202xx_new.c14
-rw-r--r--drivers/ide/pci/pdc202xx_old.c17
-rw-r--r--drivers/ide/pci/piix.c9
-rw-r--r--drivers/ide/pci/rz1000.c10
-rw-r--r--drivers/ide/pci/sc1200.c8
-rw-r--r--drivers/ide/pci/scc_pata.c10
-rw-r--r--drivers/ide/pci/serverworks.c11
-rw-r--r--drivers/ide/pci/sgiioc4.c20
-rw-r--r--drivers/ide/pci/siimage.c31
-rw-r--r--drivers/ide/pci/sis5513.c14
-rw-r--r--drivers/ide/pci/sl82c105.c6
-rw-r--r--drivers/ide/pci/slc90e66.c26
-rw-r--r--drivers/ide/pci/tc86c001.c24
-rw-r--r--drivers/ide/pci/triflex.c5
-rw-r--r--drivers/ide/pci/trm290.c7
-rw-r--r--drivers/ide/pci/via82cxxx.c10
-rw-r--r--drivers/ide/ppc/mpc8xx.c2
-rw-r--r--drivers/ide/ppc/pmac.c84
-rw-r--r--drivers/ide/setup-pci.c77
-rw-r--r--drivers/macintosh/mediabay.c2
-rw-r--r--drivers/scsi/ide-scsi.c9
-rw-r--r--include/linux/hdreg.h4
-rw-r--r--include/linux/ide.h51
77 files changed, 1989 insertions, 2849 deletions
diff --git a/Documentation/ide/ChangeLog.ide-tape.1995-2002 b/Documentation/ide/ChangeLog.ide-tape.1995-2002
new file mode 100644
index 000000000000..877fac8770b3
--- /dev/null
+++ b/Documentation/ide/ChangeLog.ide-tape.1995-2002
@@ -0,0 +1,257 @@
+/*
+ * Ver 0.1 Nov 1 95 Pre-working code :-)
+ * Ver 0.2 Nov 23 95 A short backup (few megabytes) and restore procedure
+ * was successful ! (Using tar cvf ... on the block
+ * device interface).
+ * A longer backup resulted in major swapping, bad
+ * overall Linux performance and eventually failed as
+ * we received non serial read-ahead requests from the
+ * buffer cache.
+ * Ver 0.3 Nov 28 95 Long backups are now possible, thanks to the
+ * character device interface. Linux's responsiveness
+ * and performance doesn't seem to be much affected
+ * from the background backup procedure.
+ * Some general mtio.h magnetic tape operations are
+ * now supported by our character device. As a result,
+ * popular tape utilities are starting to work with
+ * ide tapes :-)
+ * The following configurations were tested:
+ * 1. An IDE ATAPI TAPE shares the same interface
+ * and irq with an IDE ATAPI CDROM.
+ * 2. An IDE ATAPI TAPE shares the same interface
+ * and irq with a normal IDE disk.
+ * Both configurations seemed to work just fine !
+ * However, to be on the safe side, it is meanwhile
+ * recommended to give the IDE TAPE its own interface
+ * and irq.
+ * The one thing which needs to be done here is to
+ * add a "request postpone" feature to ide.c,
+ * so that we won't have to wait for the tape to finish
+ * performing a long media access (DSC) request (such
+ * as a rewind) before we can access the other device
+ * on the same interface. This effect doesn't disturb
+ * normal operation most of the time because read/write
+ * requests are relatively fast, and once we are
+ * performing one tape r/w request, a lot of requests
+ * from the other device can be queued and ide.c will
+ * service all of them after this single tape request.
+ * Ver 1.0 Dec 11 95 Integrated into Linux 1.3.46 development tree.
+ * On each read / write request, we now ask the drive
+ * if we can transfer a constant number of bytes
+ * (a parameter of the drive) only to its buffers,
+ * without causing actual media access. If we can't,
+ * we just wait until we can by polling the DSC bit.
+ * This ensures that while we are not transferring
+ * more bytes than the constant referred to above, the
+ * interrupt latency will not become too high and
+ * we won't cause an interrupt timeout, as happened
+ * occasionally in the previous version.
+ * While polling for DSC, the current request is
+ * postponed and ide.c is free to handle requests from
+ * the other device. This is handled transparently to
+ * ide.c. The hwgroup locking method which was used
+ * in the previous version was removed.
+ * Use of new general features which are provided by
+ * ide.c for use with atapi devices.
+ * (Programming done by Mark Lord)
+ * Few potential bug fixes (Again, suggested by Mark)
+ * Single character device data transfers are now
+ * not limited in size, as they were before.
+ * We are asking the tape about its recommended
+ * transfer unit and send a larger data transfer
+ * as several transfers of the above size.
+ * For best results, use an integral number of this
+ * basic unit (which is shown during driver
+ * initialization). I will soon add an ioctl to get
+ * this important parameter.
+ * Our data transfer buffer is allocated on startup,
+ * rather than before each data transfer. This should
+ * ensure that we will indeed have a data buffer.
+ * Ver 1.1 Dec 14 95 Fixed random problems which occurred when the tape
+ * shared an interface with another device.
+ * (poll_for_dsc was a complete mess).
+ * Removed some old (non-active) code which had
+ * to do with supporting buffer cache originated
+ * requests.
+ * The block device interface can now be opened, so
+ * that general ide driver features like the unmask
+ * interrupts flag can be selected with an ioctl.
+ * This is the only use of the block device interface.
+ * New fast pipelined operation mode (currently only on
+ * writes). When using the pipelined mode, the
+ * throughput can potentially reach the maximum
+ * tape supported throughput, regardless of the
+ * user backup program. On my tape drive, it sometimes
+ * boosted performance by a factor of 2. Pipelined
+ * mode is enabled by default, but since it has a few
+ * downfalls as well, you may want to disable it.
+ * A short explanation of the pipelined operation mode
+ * is available below.
+ * Ver 1.2 Jan 1 96 Eliminated pipelined mode race condition.
+ * Added pipeline read mode. As a result, restores
+ * are now as fast as backups.
+ * Optimized shared interface behavior. The new behavior
+ * typically results in better IDE bus efficiency and
+ * higher tape throughput.
+ * Pre-calculation of the expected read/write request
+ * service time, based on the tape's parameters. In
+ * the pipelined operation mode, this allows us to
+ * adjust our polling frequency to a much lower value,
+ * and thus to dramatically reduce our load on Linux,
+ * without any decrease in performance.
+ * Implemented additional mtio.h operations.
+ * The recommended user block size is returned by
+ * the MTIOCGET ioctl.
+ * Additional minor changes.
+ * Ver 1.3 Feb 9 96 Fixed pipelined read mode bug which prevented the
+ * use of some block sizes during a restore procedure.
+ * The character device interface will now present a
+ * continuous view of the media - any mix of block sizes
+ * during a backup/restore procedure is supported. The
+ * driver will buffer the requests internally and
+ * convert them to the tape's recommended transfer
+ * unit, making performance almost independent of the
+ * chosen user block size.
+ * Some improvements in error recovery.
+ * By cooperating with ide-dma.c, bus mastering DMA can
+ * now sometimes be used with IDE tape drives as well.
+ * Bus mastering DMA has the potential to dramatically
+ * reduce the CPU's overhead when accessing the device,
+ * and can be enabled by using hdparm -d1 on the tape's
+ * block device interface. For more info, read the
+ * comments in ide-dma.c.
+ * Ver 1.4 Mar 13 96 Fixed serialize support.
+ * Ver 1.5 Apr 12 96 Fixed shared interface operation, broken in 1.3.85.
+ * Fixed pipelined read mode inefficiency.
+ * Fixed nasty null dereferencing bug.
+ * Ver 1.6 Aug 16 96 Fixed FPU usage in the driver.
+ * Fixed end of media bug.
+ * Ver 1.7 Sep 10 96 Minor changes for the CONNER CTT8000-A model.
+ * Ver 1.8 Sep 26 96 Attempt to find a better balance between good
+ * interactive response and high system throughput.
+ * Ver 1.9 Nov 5 96 Automatically cross encountered filemarks rather
+ * than requiring an explicit FSF command.
+ * Abort pending requests at end of media.
+ * MTTELL was sometimes returning incorrect results.
+ * Return the real block size in the MTIOCGET ioctl.
+ * Some error recovery bug fixes.
+ * Ver 1.10 Nov 5 96 Major reorganization.
+ * Reduced CPU overhead a bit by eliminating internal
+ * bounce buffers.
+ * Added module support.
+ * Added multiple tape drives support.
+ * Added partition support.
+ * Rewrote DSC handling.
+ * Some portability fixes.
+ * Removed ide-tape.h.
+ * Additional minor changes.
+ * Ver 1.11 Dec 2 96 Bug fix in previous DSC timeout handling.
+ * Use ide_stall_queue() for DSC overlap.
+ * Use the maximum speed rather than the current speed
+ * to compute the request service time.
+ * Ver 1.12 Dec 7 97 Fix random memory overwriting and/or last block data
+ * corruption, which could occur if the total number
+ * of bytes written to the tape was not an integral
+ * number of tape blocks.
+ * Add support for INTERRUPT DRQ devices.
+ * Ver 1.13 Jan 2 98 Add "speed == 0" work-around for HP COLORADO 5GB
+ * Ver 1.14 Dec 30 98 Partial fixes for the Sony/AIWA tape drives.
+ * Replace cli()/sti() with hwgroup spinlocks.
+ * Ver 1.15 Mar 25 99 Fix SMP race condition by replacing hwgroup
+ * spinlock with private per-tape spinlock.
+ * Ver 1.16 Sep 1 99 Add OnStream tape support.
+ * Abort read pipeline on EOD.
+ * Wait for the tape to become ready in case it returns
+ * "in the process of becoming ready" on open().
+ * Fix zero padding of the last written block in
+ * case the tape block size is larger than PAGE_SIZE.
+ * Decrease the default disconnection time to tn.
+ * Ver 1.16e Oct 3 99 Minor fixes.
+ * Ver 1.16e1 Oct 13 99 Patches by Arnold Niessen,
+ * niessen@iae.nl / arnold.niessen@philips.com
+ * GO-1) Undefined code in idetape_read_position
+ * according to Gadi's email
+ * AJN-1) Minor fix asc == 11 should be asc == 0x11
+ * in idetape_issue_packet_command (did effect
+ * debugging output only)
+ * AJN-2) Added more debugging output, and
+ * added ide-tape: where missing. I would also
+ * like to add tape->name where possible
+ * AJN-3) Added different debug_level's
+ * via /proc/ide/hdc/settings
+ * "debug_level" determines amount of debugging output;
+ * can be changed using /proc/ide/hdx/settings
+ * 0 : almost no debugging output
+ * 1 : 0+output errors only
+ * 2 : 1+output all sensekey/asc
+ * 3 : 2+follow all chrdev related procedures
+ * 4 : 3+follow all procedures
+ * 5 : 4+include pc_stack rq_stack info
+ * 6 : 5+USE_COUNT updates
+ * AJN-4) Fixed timeout for retension in idetape_queue_pc_tail
+ * from 5 to 10 minutes
+ * AJN-5) Changed maximum number of blocks to skip when
+ * reading tapes with multiple consecutive write
+ * errors from 100 to 1000 in idetape_get_logical_blk
+ * Proposed changes to code:
+ * 1) output "logical_blk_num" via /proc
+ * 2) output "current_operation" via /proc
+ * 3) Either solve or document the fact that `mt rewind' is
+ * required after reading from /dev/nhtx to be
+ * able to rmmod the idetape module;
+ * Also, sometimes an application finishes but the
+ * device remains `busy' for some time. Same cause ?
+ * Proposed changes to release-notes:
+ * 4) write a simple `quickstart' section in the
+ * release notes; I volunteer if you don't want to
+ * 5) include a pointer to video4linux in the doc
+ * to stimulate video applications
+ * 6) release notes lines 331 and 362: explain what happens
+ * if the application data rate is higher than 1100 KB/s;
+ * similar approach to lower-than-500 kB/s ?
+ * 7) 6.6 Comparison; wouldn't it be better to allow different
+ * strategies for read and write ?
+ * Wouldn't it be better to control the tape buffer
+ * contents instead of the bandwidth ?
+ * 8) line 536: replace will by would (if I understand
+ * this section correctly, a hypothetical and unwanted situation
+ * is being described)
+ * Ver 1.16f Dec 15 99 Change place of the secondary OnStream header frames.
+ * Ver 1.17 Nov 2000 / Jan 2001 Marcel Mol, marcel@mesa.nl
+ * - Add idetape_onstream_mode_sense_tape_parameter_page
+ * function to get tape capacity in frames: tape->capacity.
+ * - Add support for DI-50 drives( or any DI- drive).
+ * - 'workaround' for read error/blank block around block 3000.
+ * - Implement Early warning for end of media for Onstream.
+ * - Cosmetic code changes for readability.
+ * - Idetape_position_tape should not use SKIP bit during
+ * Onstream read recovery.
+ * - Add capacity, logical_blk_num and first/last_frame_position
+ * to /proc/ide/hd?/settings.
+ * - Module use count was gone in the Linux 2.4 driver.
+ * Ver 1.17a Apr 2001 Willem Riede osst@riede.org
+ * - Get drive's actual block size from mode sense block descriptor
+ * - Limit size of pipeline
+ * Ver 1.17b Oct 2002 Alan Stern <stern@rowland.harvard.edu>
+ * Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used
+ * it in the code!
+ * Actually removed aborted stages in idetape_abort_pipeline
+ * instead of just changing the command code.
+ * Made the transfer byte count for Request Sense equal to the
+ * actual length of the data transfer.
+ * Changed handling of partial data transfers: they do not
+ * cause DMA errors.
+ * Moved initiation of DMA transfers to the correct place.
+ * Removed reference to unallocated memory.
+ * Made __idetape_discard_read_pipeline return the number of
+ * sectors skipped, not the number of stages.
+ * Replaced errant kfree() calls with __idetape_kfree_stage().
+ * Fixed off-by-one error in testing the pipeline length.
+ * Fixed handling of filemarks in the read pipeline.
+ * Small code optimization for MTBSF and MTBSFM ioctls.
+ * Don't try to unlock the door during device close if is
+ * already unlocked!
+ * Cosmetic fixes to miscellaneous debugging output messages.
+ * Set the minimum /proc/ide/hd?/settings values for "pipeline",
+ * "pipeline_min", and "pipeline_max" to 1.
+ */
diff --git a/Documentation/ide/ide-tape.txt b/Documentation/ide/ide-tape.txt
new file mode 100644
index 000000000000..658f271a373f
--- /dev/null
+++ b/Documentation/ide/ide-tape.txt
@@ -0,0 +1,146 @@
+/*
+ * IDE ATAPI streaming tape driver.
+ *
+ * This driver is a part of the Linux ide driver.
+ *
+ * The driver, in co-operation with ide.c, basically traverses the
+ * request-list for the block device interface. The character device
+ * interface, on the other hand, creates new requests, adds them
+ * to the request-list of the block device, and waits for their completion.
+ *
+ * Pipelined operation mode is now supported on both reads and writes.
+ *
+ * The block device major and minor numbers are determined from the
+ * tape's relative position in the ide interfaces, as explained in ide.c.
+ *
+ * The character device interface consists of the following devices:
+ *
+ * ht0 major 37, minor 0 first IDE tape, rewind on close.
+ * ht1 major 37, minor 1 second IDE tape, rewind on close.
+ * ...
+ * nht0 major 37, minor 128 first IDE tape, no rewind on close.
+ * nht1 major 37, minor 129 second IDE tape, no rewind on close.
+ * ...
+ *
+ * The general magnetic tape commands compatible interface, as defined by
+ * include/linux/mtio.h, is accessible through the character device.
+ *
+ * General ide driver configuration options, such as the interrupt-unmask
+ * flag, can be configured by issuing an ioctl to the block device interface,
+ * as any other ide device.
+ *
+ * Our own ide-tape ioctl's can be issued to either the block device or
+ * the character device interface.
+ *
+ * Maximal throughput with minimal bus load will usually be achieved in the
+ * following scenario:
+ *
+ * 1. ide-tape is operating in the pipelined operation mode.
+ * 2. No buffering is performed by the user backup program.
+ *
+ * Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive.
+ *
+ * Here are some words from the first releases of hd.c, which are quoted
+ * in ide.c and apply here as well:
+ *
+ * | Special care is recommended. Have Fun!
+ *
+ *
+ * An overview of the pipelined operation mode.
+ *
+ * In the pipelined write mode, we will usually just add requests to our
+ * pipeline and return immediately, before we even start to service them. The
+ * user program will then have enough time to prepare the next request while
+ * we are still busy servicing previous requests. In the pipelined read mode,
+ * the situation is similar - we add read-ahead requests into the pipeline,
+ * before the user even requested them.
+ *
+ * The pipeline can be viewed as a "safety net" which will be activated when
+ * the system load is high and prevents the user backup program from keeping up
+ * with the current tape speed. At this point, the pipeline will get
+ * shorter and shorter but the tape will still be streaming at the same speed.
+ * Assuming we have enough pipeline stages, the system load will hopefully
+ * decrease before the pipeline is completely empty, and the backup program
+ * will be able to "catch up" and refill the pipeline again.
+ *
+ * When using the pipelined mode, it would be best to disable any type of
+ * buffering done by the user program, as ide-tape already provides all the
+ * benefits in the kernel, where it can be done in a more efficient way.
+ * As we will usually not block the user program on a request, the most
+ * efficient user code will then be a simple read-write-read-... cycle.
+ * Any additional logic will usually just slow down the backup process.
+ *
+ * Using the pipelined mode, I get a constant over 400 KBps throughput,
+ * which seems to be the maximum throughput supported by my tape.
+ *
+ * However, there are some downfalls:
+ *
+ * 1. We use memory (for data buffers) in proportional to the number
+ * of pipeline stages (each stage is about 26 KB with my tape).
+ * 2. In the pipelined write mode, we cheat and postpone error codes
+ * to the user task. In read mode, the actual tape position
+ * will be a bit further than the last requested block.
+ *
+ * Concerning (1):
+ *
+ * 1. We allocate stages dynamically only when we need them. When
+ * we don't need them, we don't consume additional memory. In
+ * case we can't allocate stages, we just manage without them
+ * (at the expense of decreased throughput) so when Linux is
+ * tight in memory, we will not pose additional difficulties.
+ *
+ * 2. The maximum number of stages (which is, in fact, the maximum
+ * amount of memory) which we allocate is limited by the compile
+ * time parameter IDETAPE_MAX_PIPELINE_STAGES.
+ *
+ * 3. The maximum number of stages is a controlled parameter - We
+ * don't start from the user defined maximum number of stages
+ * but from the lower IDETAPE_MIN_PIPELINE_STAGES (again, we
+ * will not even allocate this amount of stages if the user
+ * program can't handle the speed). We then implement a feedback
+ * loop which checks if the pipeline is empty, and if it is, we
+ * increase the maximum number of stages as necessary until we
+ * reach the optimum value which just manages to keep the tape
+ * busy with minimum allocated memory or until we reach
+ * IDETAPE_MAX_PIPELINE_STAGES.
+ *
+ * Concerning (2):
+ *
+ * In pipelined write mode, ide-tape can not return accurate error codes
+ * to the user program since we usually just add the request to the
+ * pipeline without waiting for it to be serviced. In case an error
+ * occurs, I will report it on the next user request.
+ *
+ * In the pipelined read mode, subsequent read requests or forward
+ * filemark spacing will perform correctly, as we preserve all blocks
+ * and filemarks which we encountered during our excess read-ahead.
+ *
+ * For accurate tape positioning and error reporting, disabling
+ * pipelined mode might be the best option.
+ *
+ * You can enable/disable/tune the pipelined operation mode by adjusting
+ * the compile time parameters below.
+ *
+ *
+ * Possible improvements.
+ *
+ * 1. Support for the ATAPI overlap protocol.
+ *
+ * In order to maximize bus throughput, we currently use the DSC
+ * overlap method which enables ide.c to service requests from the
+ * other device while the tape is busy executing a command. The
+ * DSC overlap method involves polling the tape's status register
+ * for the DSC bit, and servicing the other device while the tape
+ * isn't ready.
+ *
+ * In the current QIC development standard (December 1995),
+ * it is recommended that new tape drives will *in addition*
+ * implement the ATAPI overlap protocol, which is used for the
+ * same purpose - efficient use of the IDE bus, but is interrupt
+ * driven and thus has much less CPU overhead.
+ *
+ * ATAPI overlap is likely to be supported in most new ATAPI
+ * devices, including new ATAPI cdroms, and thus provides us
+ * a method by which we can achieve higher throughput when
+ * sharing a (fast) ATA-2 disk with any (slow) new ATAPI device.
+ */
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index e42a465f5717..45b26ed351cf 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -216,8 +216,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS
memory, though.
config BLK_DEV_IDETAPE
- tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ tristate "Include IDE/ATAPI TAPE support"
help
If you have an IDE tape drive using the ATAPI protocol, say Y.
ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c
index 037300fa284c..0e7574c0ee60 100644
--- a/drivers/ide/arm/bast-ide.c
+++ b/drivers/ide/arm/bast-ide.c
@@ -28,8 +28,10 @@ static int __init
bastide_register(unsigned int base, unsigned int aux, int irq,
ide_hwif_t **hwif)
{
+ ide_hwif_t *hwif;
hw_regs_t hw;
int i;
+ u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
memset(&hw, 0, sizeof(hw));
@@ -44,8 +46,24 @@ bastide_register(unsigned int base, unsigned int aux, int irq,
hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20);
hw.irq = irq;
- ide_register_hw(&hw, NULL, hwif);
+ hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+ if (hwif == NULL)
+ goto out;
+ i = hwif->index;
+
+ if (hwif->present)
+ ide_unregister(i, 0, 0);
+ else if (!hwif->hold)
+ ide_init_port_data(hwif, i);
+
+ ide_init_port_hw(hwif, &hw);
+ hwif->quirkproc = NULL;
+
+ idx[0] = i;
+
+ ide_device_add(idx, NULL);
+out:
return 0;
}
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 8d2cc47a362e..fb00f3827ecd 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -377,9 +377,6 @@ static void icside_dma_lost_irq(ide_drive_t *drive)
static void icside_dma_init(ide_hwif_t *hwif)
{
- hwif->mwdma_mask = 7; /* MW0..2 */
- hwif->swdma_mask = 7; /* SW0..2 */
-
hwif->dmatable_cpu = NULL;
hwif->dmatable_dma = 0;
hwif->set_dma_mode = icside_set_dma_mode;
@@ -459,11 +456,19 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
idx[0] = hwif->index;
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
return 0;
}
+static const struct ide_port_info icside_v6_port_info __initdata = {
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+ IDE_HFLAG_NO_AUTOTUNE,
+ .mwdma_mask = ATA_MWDMA2,
+ .swdma_mask = ATA_SWDMA2,
+};
+
static int __init
icside_register_v6(struct icside_state *state, struct expansion_card *ec)
{
@@ -472,6 +477,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
unsigned int sel = 0;
int ret;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ struct ide_port_info d = icside_v6_port_info;
ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!ioc_base) {
@@ -521,30 +527,25 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
state->hwif[1] = mate;
hwif->maskproc = icside_maskproc;
- hwif->channel = 0;
hwif->hwif_data = state;
- hwif->mate = mate;
- hwif->serialized = 1;
hwif->config_data = (unsigned long)ioc_base;
hwif->select_data = sel;
mate->maskproc = icside_maskproc;
- mate->channel = 1;
mate->hwif_data = state;
- mate->mate = hwif;
- mate->serialized = 1;
mate->config_data = (unsigned long)ioc_base;
mate->select_data = sel | 1;
if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) {
icside_dma_init(hwif);
icside_dma_init(mate);
- }
+ } else
+ d.mwdma_mask = d.swdma_mask = 0;
idx[0] = hwif->index;
idx[1] = mate->index;
- ide_device_add(idx);
+ ide_device_add(idx, &d);
return 0;
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 60f2497542c0..43a70e91363e 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -39,7 +39,7 @@ static int __init ide_arm_init(void)
ide_init_port_hw(hwif, &hw);
idx[0] = hwif->index;
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
}
return 0;
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index c8b6581e624e..efba00d2fc37 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -58,7 +58,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
idx[0] = hwif->index;
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
ecard_set_drvdata(ec, hwif);
goto out;
@@ -76,7 +76,7 @@ static void __devexit rapide_remove(struct expansion_card *ec)
ecard_set_drvdata(ec, NULL);
- ide_unregister(hwif->index);
+ ide_unregister(hwif->index, 0, 0);
ecard_release_resources(ec);
}
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 0640a38ff127..00587a8c2ba1 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -753,6 +753,15 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
}
+static const struct ide_port_info cris_port_info __initdata = {
+ .chipset = ide_etrax100,
+ .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_NO_DMA, /* no SFF-style DMA */
+ .pio_mask = ATA_PIO4,
+ .udma_mask = cris_ultra_mask,
+ .mwdma_mask = ATA_MWDMA2,
+};
+
static int __init init_e100_ide(void)
{
hw_regs_t hw;
@@ -780,7 +789,6 @@ static int __init init_e100_ide(void)
ide_init_port_data(hwif, hwif->index);
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
- hwif->chipset = ide_etrax100;
hwif->set_pio_mode = &cris_set_pio_mode;
hwif->set_dma_mode = &cris_set_dma_mode;
hwif->ata_input_data = &cris_ide_input_data;
@@ -799,12 +807,6 @@ static int __init init_e100_ide(void)
hwif->INB = &cris_ide_inb;
hwif->INW = &cris_ide_inw;
hwif->cbl = ATA_CBL_PATA40;
- hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
- hwif->pio_mask = ATA_PIO4,
- hwif->drives[0].autotune = 1;
- hwif->drives[1].autotune = 1;
- hwif->ultra_mask = cris_ultra_mask;
- hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
idx[h] = hwif->index;
}
@@ -820,7 +822,7 @@ static int __init init_e100_ide(void)
cris_ide_set_speed(TYPE_DMA, 0, ATA_DMA2_STROBE, ATA_DMA2_HOLD);
cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0);
- ide_device_add(idx);
+ ide_device_add(idx, &cris_port_info);
return 0;
}
@@ -1032,11 +1034,7 @@ static int cris_dma_setup(ide_drive_t *drive)
static void cris_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
- /* set the irq handler which will finish the request when DMA is done */
- ide_set_handler(drive, &cris_dma_intr, WAIT_CMD, NULL);
-
- /* issue cmd to drive */
- cris_ide_outb(command, IDE_COMMAND_REG);
+ ide_execute_command(drive, command, &cris_dma_intr, WAIT_CMD, NULL);
}
static void cris_dma_start(ide_drive_t *drive)
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 02432958dfe1..520aec075700 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -114,7 +114,7 @@ static int __init h8300_ide_init(void)
idx[0] = index;
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
return 0;
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 68bc61844780..25aaeae1e830 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -39,7 +39,6 @@ struct GTM_buffer {
};
struct ide_acpi_drive_link {
- ide_drive_t *drive;
acpi_handle obj_handle;
u8 idbuff[512];
};
@@ -280,16 +279,6 @@ static int do_drive_get_GTF(ide_drive_t *drive,
port = hwif->channel ? drive->dn - 2: drive->dn;
- if (!drive->acpidata) {
- if (port == 0) {
- drive->acpidata = &hwif->acpidata->master;
- hwif->acpidata->master.drive = drive;
- } else {
- drive->acpidata = &hwif->acpidata->slave;
- hwif->acpidata->slave.drive = drive;
- }
- }
-
DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
hwif->name, dev->bus_id, port, hwif->channel);
@@ -494,7 +483,6 @@ int ide_acpi_exec_tfs(ide_drive_t *drive)
return ret;
}
-EXPORT_SYMBOL_GPL(ide_acpi_exec_tfs);
/**
* ide_acpi_get_timing - get the channel (controller) timings
@@ -580,7 +568,6 @@ void ide_acpi_get_timing(ide_hwif_t *hwif)
kfree(output.pointer);
}
-EXPORT_SYMBOL_GPL(ide_acpi_get_timing);
/**
* ide_acpi_push_timing - set the channel (controller) timings
@@ -634,7 +621,6 @@ void ide_acpi_push_timing(ide_hwif_t *hwif)
}
DEBPRINT("_STM status: %d\n", status);
}
-EXPORT_SYMBOL_GPL(ide_acpi_push_timing);
/**
* ide_acpi_set_state - set the channel power state
@@ -688,11 +674,6 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on)
*/
void ide_acpi_init(ide_hwif_t *hwif)
{
- int unit;
- int err;
- struct ide_acpi_drive_link *master;
- struct ide_acpi_drive_link *slave;
-
ide_acpi_blacklist();
hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL);
@@ -704,40 +685,38 @@ void ide_acpi_init(ide_hwif_t *hwif)
DEBPRINT("no ACPI object for %s found\n", hwif->name);
kfree(hwif->acpidata);
hwif->acpidata = NULL;
- return;
}
+}
+
+void ide_acpi_port_init_devices(ide_hwif_t *hwif)
+{
+ ide_drive_t *drive;
+ int i, err;
+
+ if (hwif->acpidata == NULL)
+ return;
/*
* The ACPI spec mandates that we send information
* for both drives, regardless whether they are connected
* or not.
*/
- hwif->acpidata->master.drive = &hwif->drives[0];
hwif->drives[0].acpidata = &hwif->acpidata->master;
- master = &hwif->acpidata->master;
-
- hwif->acpidata->slave.drive = &hwif->drives[1];
hwif->drives[1].acpidata = &hwif->acpidata->slave;
- slave = &hwif->acpidata->slave;
-
/*
* Send IDENTIFY for each drive
*/
- if (master->drive->present) {
- err = taskfile_lib_get_identify(master->drive, master->idbuff);
- if (err) {
- DEBPRINT("identify device %s failed (%d)\n",
- master->drive->name, err);
- }
- }
+ for (i = 0; i < MAX_DRIVES; i++) {
+ drive = &hwif->drives[i];
+
+ if (!drive->present)
+ continue;
- if (slave->drive->present) {
- err = taskfile_lib_get_identify(slave->drive, slave->idbuff);
- if (err) {
+ err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff);
+ if (err)
DEBPRINT("identify device %s failed (%d)\n",
- slave->drive->name, err);
- }
+ drive->name, err);
}
if (ide_noacpionboot) {
@@ -753,13 +732,11 @@ void ide_acpi_init(ide_hwif_t *hwif)
ide_acpi_get_timing(hwif);
ide_acpi_push_timing(hwif);
- for (unit = 0; unit < MAX_DRIVES; ++unit) {
- ide_drive_t *drive = &hwif->drives[unit];
+ for (i = 0; i < MAX_DRIVES; i++) {
+ drive = &hwif->drives[i];
- if (drive->present) {
+ if (drive->present)
/* Execute ACPI startup code */
ide_acpi_exec_tfs(drive);
- }
}
}
-EXPORT_SYMBOL_GPL(ide_acpi_init);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 23074e84472e..ee4d458e2bbf 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -604,8 +604,6 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive,
* Block read functions.
*/
-typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
-
static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len)
{
while (len > 0) {
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 7beaf1e9be12..3cf59f2c3928 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -819,6 +819,26 @@ int ide_set_dma(ide_drive_t *drive)
return 0;
}
+void ide_check_dma_crc(ide_drive_t *drive)
+{
+ u8 mode;
+
+ ide_dma_off_quietly(drive);
+ drive->crc_count = 0;
+ mode = drive->current_speed;
+ /*
+ * Don't try non Ultra-DMA modes without iCRC's. Force the
+ * device to PIO and make the user enable SWDMA/MWDMA modes.
+ */
+ if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7)
+ mode--;
+ else
+ mode = XFER_PIO_4;
+ ide_set_xfer_rate(drive, mode);
+ if (drive->current_speed >= XFER_SW_DMA_0)
+ ide_dma_on(drive);
+}
+
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
void ide_dma_lost_irq (ide_drive_t *drive)
{
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 3512637ae8d4..f8fe6ee128f3 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -4,11 +4,6 @@
* Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
* Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net>
* Copyright (C) 2005 Bartlomiej Zolnierkiewicz
- */
-
-/*
- * The driver currently doesn't have any fancy features, just the bare
- * minimum read/write support.
*
* This driver supports the following IDE floppy drives:
*
@@ -20,7 +15,7 @@
* Documentation/ide/ChangeLog.ide-floppy.1996-2002
*/
-#define IDEFLOPPY_VERSION "0.99.newide"
+#define IDEFLOPPY_VERSION "1.00"
#include <linux/module.h>
#include <linux/types.h>
@@ -42,179 +37,91 @@
#include <scsi/scsi_ioctl.h>
#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
#include <asm/unaligned.h>
-/*
- * The following are used to debug the driver.
- */
+/* define to see debug info */
#define IDEFLOPPY_DEBUG_LOG 0
-#define IDEFLOPPY_DEBUG_INFO 0
-#define IDEFLOPPY_DEBUG_BUGS 1
/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
-#define IDEFLOPPY_DEBUG( fmt, args... )
+#define IDEFLOPPY_DEBUG(fmt, args...)
#if IDEFLOPPY_DEBUG_LOG
-#define debug_log printk
+#define debug_log(fmt, args...) \
+ printk(KERN_INFO "ide-floppy: " fmt, ## args)
#else
-#define debug_log(fmt, args... ) do {} while(0)
+#define debug_log(fmt, args...) do {} while (0)
#endif
-/*
- * Some drives require a longer irq timeout.
- */
+/* Some drives require a longer irq timeout. */
#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD)
/*
- * After each failed packet command we issue a request sense command
- * and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times.
+ * After each failed packet command we issue a request sense command and retry
+ * the packet command IDEFLOPPY_MAX_PC_RETRIES times.
*/
#define IDEFLOPPY_MAX_PC_RETRIES 3
/*
- * With each packet command, we allocate a buffer of
- * IDEFLOPPY_PC_BUFFER_SIZE bytes.
+ * With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_SIZE
+ * bytes.
*/
#define IDEFLOPPY_PC_BUFFER_SIZE 256
/*
- * In various places in the driver, we need to allocate storage
- * for packet commands and requests, which will remain valid while
- * we leave the driver to wait for an interrupt or a timeout event.
+ * In various places in the driver, we need to allocate storage for packet
+ * commands and requests, which will remain valid while we leave the driver to
+ * wait for an interrupt or a timeout event.
*/
#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)
-/*
- * Our view of a packet command.
- */
typedef struct idefloppy_packet_command_s {
u8 c[12]; /* Actual packet bytes */
- int retries; /* On each retry, we increment retries */
+ int retries; /* On each retry, we increment
+ retries */
int error; /* Error code */
int request_transfer; /* Bytes to transfer */
int actually_transferred; /* Bytes actually transferred */
int buffer_size; /* Size of our data buffer */
- int b_count; /* Missing/Available data on the current buffer */
+ int b_count; /* Missing/Available data on
+ the current buffer */
struct request *rq; /* The corresponding request */
u8 *buffer; /* Data buffer */
- u8 *current_position; /* Pointer into the above buffer */
- void (*callback) (ide_drive_t *); /* Called when this packet command is completed */
+ u8 *current_position; /* Pointer into above buffer */
+ void (*callback) (ide_drive_t *); /* Called when this packet
+ command is completed */
u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */
- unsigned long flags; /* Status/Action bit flags: long for set_bit */
+ unsigned long flags; /* Status/Action bit flags: long
+ for set_bit */
} idefloppy_pc_t;
-/*
- * Packet command flag bits.
- */
-#define PC_ABORT 0 /* Set when an error is considered normal - We won't retry */
-#define PC_DMA_RECOMMENDED 2 /* 1 when we prefer to use DMA if possible */
-#define PC_DMA_IN_PROGRESS 3 /* 1 while DMA in progress */
-#define PC_DMA_ERROR 4 /* 1 when encountered problem during DMA */
-#define PC_WRITING 5 /* Data direction */
-
-#define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */
-
-/*
- * Removable Block Access Capabilities Page
- */
-typedef struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned page_code :6; /* Page code - Should be 0x1b */
- unsigned reserved1_6 :1; /* Reserved */
- unsigned ps :1; /* Should be 0 */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned ps :1; /* Should be 0 */
- unsigned reserved1_6 :1; /* Reserved */
- unsigned page_code :6; /* Page code - Should be 0x1b */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 page_length; /* Page Length - Should be 0xa */
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned reserved2 :6;
- unsigned srfp :1; /* Supports reporting progress of format */
- unsigned sflp :1; /* System floppy type device */
- unsigned tlun :3; /* Total logical units supported by the device */
- unsigned reserved3 :3;
- unsigned sml :1; /* Single / Multiple lun supported */
- unsigned ncd :1; /* Non cd optical device */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned sflp :1; /* System floppy type device */
- unsigned srfp :1; /* Supports reporting progress of format */
- unsigned reserved2 :6;
- unsigned ncd :1; /* Non cd optical device */
- unsigned sml :1; /* Single / Multiple lun supported */
- unsigned reserved3 :3;
- unsigned tlun :3; /* Total logical units supported by the device */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 reserved[8];
-} idefloppy_capabilities_page_t;
-
-/*
- * Flexible disk page.
- */
-typedef struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned page_code :6; /* Page code - Should be 0x5 */
- unsigned reserved1_6 :1; /* Reserved */
- unsigned ps :1; /* The device is capable of saving the page */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned ps :1; /* The device is capable of saving the page */
- unsigned reserved1_6 :1; /* Reserved */
- unsigned page_code :6; /* Page code - Should be 0x5 */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 page_length; /* Page Length - Should be 0x1e */
- u16 transfer_rate; /* In kilobits per second */
- u8 heads, sectors; /* Number of heads, Number of sectors per track */
- u16 sector_size; /* Byes per sector */
- u16 cyls; /* Number of cylinders */
- u8 reserved10[10];
- u8 motor_delay; /* Motor off delay */
- u8 reserved21[7];
- u16 rpm; /* Rotations per minute */
- u8 reserved30[2];
-} idefloppy_flexible_disk_page_t;
-
-/*
- * Format capacity
- */
-typedef struct {
- u8 reserved[3];
- u8 length; /* Length of the following descriptors in bytes */
-} idefloppy_capacity_header_t;
-
-typedef struct {
- u32 blocks; /* Number of blocks */
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned dc :2; /* Descriptor Code */
- unsigned reserved :6;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned reserved :6;
- unsigned dc :2; /* Descriptor Code */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 length_msb; /* Block Length (MSB)*/
- u16 length; /* Block Length */
-} idefloppy_capacity_descriptor_t;
+/* Packet command flag bits. */
+enum {
+ /* 1 when we prefer to use DMA if possible */
+ PC_FLAG_DMA_RECOMMENDED = (1 << 0),
+ /* 1 while DMA in progress */
+ PC_FLAG_DMA_IN_PROGRESS = (1 << 1),
+ /* 1 when encountered problem during DMA */
+ PC_FLAG_DMA_ERROR = (1 << 2),
+ /* Data direction */
+ PC_FLAG_WRITING = (1 << 3),
+ /* Suppress error reporting */
+ PC_FLAG_SUPPRESS_ERROR = (1 << 4),
+};
+/* format capacities descriptor codes */
#define CAPACITY_INVALID 0x00
#define CAPACITY_UNFORMATTED 0x01
#define CAPACITY_CURRENT 0x02
#define CAPACITY_NO_CARTRIDGE 0x03
/*
- * Most of our global data which we need to save even as we leave the
- * driver due to an interrupt or a timer event is stored in a variable
- * of type idefloppy_floppy_t, defined below.
+ * Most of our global data which we need to save even as we leave the driver
+ * due to an interrupt or a timer event is stored in a variable of type
+ * idefloppy_floppy_t, defined below.
*/
typedef struct ide_floppy_obj {
ide_drive_t *drive;
@@ -235,23 +142,19 @@ typedef struct ide_floppy_obj {
/* We implement a circular array */
int rq_stack_index;
- /*
- * Last error information
- */
+ /* Last error information */
u8 sense_key, asc, ascq;
/* delay this long before sending packet command */
u8 ticks;
int progress_indication;
- /*
- * Device information
- */
+ /* Device information */
/* Current format */
int blocks, block_size, bs_factor;
- /* Last format capacity */
- idefloppy_capacity_descriptor_t capacity;
+ /* Last format capacity descriptor */
+ u8 cap_desc[8];
/* Copy of the flexible disk page */
- idefloppy_flexible_disk_page_t flexible_disk_page;
+ u8 flexible_disk_page[32];
/* Write protect */
int wp;
/* Supports format progress report */
@@ -262,64 +165,40 @@ typedef struct ide_floppy_obj {
#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
-/*
- * Floppy flag bits values.
- */
-#define IDEFLOPPY_DRQ_INTERRUPT 0 /* DRQ interrupt device */
-#define IDEFLOPPY_MEDIA_CHANGED 1 /* Media may have changed */
-#define IDEFLOPPY_USE_READ12 2 /* Use READ12/WRITE12 or READ10/WRITE10 */
-#define IDEFLOPPY_FORMAT_IN_PROGRESS 3 /* Format in progress */
-#define IDEFLOPPY_CLIK_DRIVE 4 /* Avoid commands not supported in Clik drive */
-#define IDEFLOPPY_ZIP_DRIVE 5 /* Requires BH algorithm for packets */
-
-/*
- * ATAPI floppy drive packet commands
- */
-#define IDEFLOPPY_FORMAT_UNIT_CMD 0x04
-#define IDEFLOPPY_INQUIRY_CMD 0x12
-#define IDEFLOPPY_MODE_SELECT_CMD 0x55
-#define IDEFLOPPY_MODE_SENSE_CMD 0x5a
-#define IDEFLOPPY_READ10_CMD 0x28
-#define IDEFLOPPY_READ12_CMD 0xa8
-#define IDEFLOPPY_READ_CAPACITY_CMD 0x23
-#define IDEFLOPPY_REQUEST_SENSE_CMD 0x03
-#define IDEFLOPPY_PREVENT_REMOVAL_CMD 0x1e
-#define IDEFLOPPY_SEEK_CMD 0x2b
-#define IDEFLOPPY_START_STOP_CMD 0x1b
-#define IDEFLOPPY_TEST_UNIT_READY_CMD 0x00
-#define IDEFLOPPY_VERIFY_CMD 0x2f
-#define IDEFLOPPY_WRITE10_CMD 0x2a
-#define IDEFLOPPY_WRITE12_CMD 0xaa
-#define IDEFLOPPY_WRITE_VERIFY_CMD 0x2e
+/* Floppy flag bits values. */
+enum {
+ /* DRQ interrupt device */
+ IDEFLOPPY_FLAG_DRQ_INTERRUPT = (1 << 0),
+ /* Media may have changed */
+ IDEFLOPPY_FLAG_MEDIA_CHANGED = (1 << 1),
+ /* Format in progress */
+ IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS = (1 << 2),
+ /* Avoid commands not supported in Clik drive */
+ IDEFLOPPY_FLAG_CLIK_DRIVE = (1 << 3),
+ /* Requires BH algorithm for packets */
+ IDEFLOPPY_FLAG_ZIP_DRIVE = (1 << 4),
+};
-/*
- * Defines for the mode sense command
- */
+/* Defines for the MODE SENSE command */
#define MODE_SENSE_CURRENT 0x00
#define MODE_SENSE_CHANGEABLE 0x01
-#define MODE_SENSE_DEFAULT 0x02
+#define MODE_SENSE_DEFAULT 0x02
#define MODE_SENSE_SAVED 0x03
-/*
- * IOCTLs used in low-level formatting.
- */
-
+/* IOCTLs used in low-level formatting. */
#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
-/*
- * Error codes which are returned in rq->errors to the higher part
- * of the driver.
- */
+/* Error code returned in rq->errors to the higher part of the driver. */
#define IDEFLOPPY_ERROR_GENERAL 101
/*
- * The following is used to format the general configuration word of
- * the ATAPI IDENTIFY DEVICE command.
+ * The following is used to format the general configuration word of the
+ * ATAPI IDENTIFY DEVICE command.
*/
-struct idefloppy_id_gcw {
+struct idefloppy_id_gcw {
#if defined(__LITTLE_ENDIAN_BITFIELD)
unsigned packet_size :2; /* Packet Size */
unsigned reserved234 :3; /* Reserved */
@@ -342,103 +221,12 @@ struct idefloppy_id_gcw {
};
/*
- * INQUIRY packet command - Data Format
- */
-typedef struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned device_type :5; /* Peripheral Device Type */
- unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */
- unsigned reserved1_6t0 :7; /* Reserved */
- unsigned rmb :1; /* Removable Medium Bit */
- unsigned ansi_version :3; /* ANSI Version */
- unsigned ecma_version :3; /* ECMA Version */
- unsigned iso_version :2; /* ISO Version */
- unsigned response_format :4; /* Response Data Format */
- unsigned reserved3_45 :2; /* Reserved */
- unsigned reserved3_6 :1; /* TrmIOP - Reserved */
- unsigned reserved3_7 :1; /* AENC - Reserved */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */
- unsigned device_type :5; /* Peripheral Device Type */
- unsigned rmb :1; /* Removable Medium Bit */
- unsigned reserved1_6t0 :7; /* Reserved */
- unsigned iso_version :2; /* ISO Version */
- unsigned ecma_version :3; /* ECMA Version */
- unsigned ansi_version :3; /* ANSI Version */
- unsigned reserved3_7 :1; /* AENC - Reserved */
- unsigned reserved3_6 :1; /* TrmIOP - Reserved */
- unsigned reserved3_45 :2; /* Reserved */
- unsigned response_format :4; /* Response Data Format */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 additional_length; /* Additional Length (total_length-4) */
- u8 rsv5, rsv6, rsv7; /* Reserved */
- u8 vendor_id[8]; /* Vendor Identification */
- u8 product_id[16]; /* Product Identification */
- u8 revision_level[4]; /* Revision Level */
- u8 vendor_specific[20]; /* Vendor Specific - Optional */
- u8 reserved56t95[40]; /* Reserved - Optional */
- /* Additional information may be returned */
-} idefloppy_inquiry_result_t;
-
-/*
- * REQUEST SENSE packet command result - Data Format.
- */
-typedef struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned error_code :7; /* Current error (0x70) */
- unsigned valid :1; /* The information field conforms to SFF-8070i */
- u8 reserved1 :8; /* Reserved */
- unsigned sense_key :4; /* Sense Key */
- unsigned reserved2_4 :1; /* Reserved */
- unsigned ili :1; /* Incorrect Length Indicator */
- unsigned reserved2_67 :2;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned valid :1; /* The information field conforms to SFF-8070i */
- unsigned error_code :7; /* Current error (0x70) */
- u8 reserved1 :8; /* Reserved */
- unsigned reserved2_67 :2;
- unsigned ili :1; /* Incorrect Length Indicator */
- unsigned reserved2_4 :1; /* Reserved */
- unsigned sense_key :4; /* Sense Key */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u32 information __attribute__ ((packed));
- u8 asl; /* Additional sense length (n-7) */
- u32 command_specific; /* Additional command specific information */
- u8 asc; /* Additional Sense Code */
- u8 ascq; /* Additional Sense Code Qualifier */
- u8 replaceable_unit_code; /* Field Replaceable Unit Code */
- u8 sksv[3];
- u8 pad[2]; /* Padding to 20 bytes */
-} idefloppy_request_sense_result_t;
-
-/*
- * Pages of the SELECT SENSE / MODE SENSE packet commands.
+ * Pages of the SELECT SENSE / MODE SENSE packet commands.
+ * See SFF-8070i spec.
*/
#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
-/*
- * Mode Parameter Header for the MODE SENSE packet command
- */
-typedef struct {
- u16 mode_data_length; /* Length of the following data transfer */
- u8 medium_type; /* Medium Type */
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned reserved3 :7;
- unsigned wp :1; /* Write protect */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned wp :1; /* Write protect */
- unsigned reserved3 :7;
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 reserved[4];
-} idefloppy_mode_parameter_header_t;
-
static DEFINE_MUTEX(idefloppy_ref_mutex);
#define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref)
@@ -458,39 +246,35 @@ static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
return floppy;
}
-static void ide_floppy_release(struct kref *);
+static void idefloppy_cleanup_obj(struct kref *);
static void ide_floppy_put(struct ide_floppy_obj *floppy)
{
mutex_lock(&idefloppy_ref_mutex);
- kref_put(&floppy->kref, ide_floppy_release);
+ kref_put(&floppy->kref, idefloppy_cleanup_obj);
mutex_unlock(&idefloppy_ref_mutex);
}
/*
- * Too bad. The drive wants to send us data which we are not ready to accept.
- * Just throw it away.
+ * Too bad. The drive wants to send us data which we are not ready to accept.
+ * Just throw it away.
*/
-static void idefloppy_discard_data (ide_drive_t *drive, unsigned int bcount)
+static void idefloppy_discard_data(ide_drive_t *drive, unsigned int bcount)
{
while (bcount--)
(void) HWIF(drive)->INB(IDE_DATA_REG);
}
-#if IDEFLOPPY_DEBUG_BUGS
-static void idefloppy_write_zeros (ide_drive_t *drive, unsigned int bcount)
+static void idefloppy_write_zeros(ide_drive_t *drive, unsigned int bcount)
{
while (bcount--)
HWIF(drive)->OUTB(0, IDE_DATA_REG);
}
-#endif /* IDEFLOPPY_DEBUG_BUGS */
/*
- * idefloppy_do_end_request is used to finish servicing a request.
- *
- * For read/write requests, we will call ide_end_request to pass to the
- * next buffer.
+ * Used to finish servicing a request. For read/write requests, we will call
+ * ide_end_request to pass to the next buffer.
*/
static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
{
@@ -498,12 +282,12 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
struct request *rq = HWGROUP(drive)->rq;
int error;
- debug_log(KERN_INFO "Reached idefloppy_end_request\n");
+ debug_log("Reached %s\n", __func__);
switch (uptodate) {
- case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
- case 1: error = 0; break;
- default: error = uptodate;
+ case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
+ case 1: error = 0; break;
+ default: error = uptodate;
}
if (error)
floppy->failed_pc = NULL;
@@ -521,39 +305,8 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
return 0;
}
-static void idefloppy_input_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount)
-{
- struct request *rq = pc->rq;
- struct bio_vec *bvec;
- struct req_iterator iter;
- unsigned long flags;
- char *data;
- int count, done = 0;
-
- rq_for_each_segment(bvec, rq, iter) {
- if (!bcount)
- break;
-
- count = min(bvec->bv_len, bcount);
-
- data = bvec_kmap_irq(bvec, &flags);
- drive->hwif->atapi_input_bytes(drive, data, count);
- bvec_kunmap_irq(data, &flags);
-
- bcount -= count;
- pc->b_count += count;
- done += count;
- }
-
- idefloppy_do_end_request(drive, 1, done >> 9);
-
- if (bcount) {
- printk(KERN_ERR "%s: leftover data in idefloppy_input_buffers, bcount == %d\n", drive->name, bcount);
- idefloppy_discard_data(drive, bcount);
- }
-}
-
-static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount)
+static void ide_floppy_io_buffers(ide_drive_t *drive, idefloppy_pc_t *pc,
+ unsigned int bcount, int direction)
{
struct request *rq = pc->rq;
struct req_iterator iter;
@@ -569,7 +322,10 @@ static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, un
count = min(bvec->bv_len, bcount);
data = bvec_kmap_irq(bvec, &flags);
- drive->hwif->atapi_output_bytes(drive, data, count);
+ if (direction)
+ drive->hwif->atapi_output_bytes(drive, data, count);
+ else
+ drive->hwif->atapi_input_bytes(drive, data, count);
bvec_kunmap_irq(data, &flags);
bcount -= count;
@@ -579,15 +335,18 @@ static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, un
idefloppy_do_end_request(drive, 1, done >> 9);
-#if IDEFLOPPY_DEBUG_BUGS
if (bcount) {
- printk(KERN_ERR "%s: leftover data in idefloppy_output_buffers, bcount == %d\n", drive->name, bcount);
- idefloppy_write_zeros(drive, bcount);
+ printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n",
+ drive->name, __func__, bcount);
+ if (direction)
+ idefloppy_write_zeros(drive, bcount);
+ else
+ idefloppy_discard_data(drive, bcount);
+
}
-#endif
}
-static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc)
+static void idefloppy_update_buffers(ide_drive_t *drive, idefloppy_pc_t *pc)
{
struct request *rq = pc->rq;
struct bio *bio = rq->bio;
@@ -597,11 +356,12 @@ static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc)
}
/*
- * idefloppy_queue_pc_head generates a new packet command request in front
- * of the request queue, before the current request, so that it will be
- * processed immediately, on the next pass through the driver.
+ * Generate a new packet command request in front of the request queue, before
+ * the current request so that it will be processed immediately, on the next
+ * pass through the driver.
*/
-static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struct request *rq)
+static void idefloppy_queue_pc_head(ide_drive_t *drive, idefloppy_pc_t *pc,
+ struct request *rq)
{
struct ide_floppy_obj *floppy = drive->driver_data;
@@ -612,16 +372,16 @@ static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struc
(void) ide_do_drive_cmd(drive, rq, ide_preempt);
}
-static idefloppy_pc_t *idefloppy_next_pc_storage (ide_drive_t *drive)
+static idefloppy_pc_t *idefloppy_next_pc_storage(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK)
- floppy->pc_stack_index=0;
+ floppy->pc_stack_index = 0;
return (&floppy->pc_stack[floppy->pc_stack_index++]);
}
-static struct request *idefloppy_next_rq_storage (ide_drive_t *drive)
+static struct request *idefloppy_next_rq_storage(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
@@ -630,60 +390,53 @@ static struct request *idefloppy_next_rq_storage (ide_drive_t *drive)
return (&floppy->rq_stack[floppy->rq_stack_index++]);
}
-/*
- * idefloppy_analyze_error is called on each failed packet command retry
- * to analyze the request sense.
- */
-static void idefloppy_analyze_error (ide_drive_t *drive,idefloppy_request_sense_result_t *result)
+static void idefloppy_request_sense_callback(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
+ u8 *buf = floppy->pc->buffer;
- floppy->sense_key = result->sense_key;
- floppy->asc = result->asc;
- floppy->ascq = result->ascq;
- floppy->progress_indication = result->sksv[0] & 0x80 ?
- (u16)get_unaligned((u16 *)(result->sksv+1)):0x10000;
- if (floppy->failed_pc)
- debug_log(KERN_INFO "ide-floppy: pc = %x, sense key = %x, "
- "asc = %x, ascq = %x\n", floppy->failed_pc->c[0],
- result->sense_key, result->asc, result->ascq);
- else
- debug_log(KERN_INFO "ide-floppy: sense key = %x, asc = %x, "
- "ascq = %x\n", result->sense_key,
- result->asc, result->ascq);
-}
-
-static void idefloppy_request_sense_callback (ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ debug_log("Reached %s\n", __func__);
- debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__);
-
if (!floppy->pc->error) {
- idefloppy_analyze_error(drive,(idefloppy_request_sense_result_t *) floppy->pc->buffer);
+ floppy->sense_key = buf[2] & 0x0F;
+ floppy->asc = buf[12];
+ floppy->ascq = buf[13];
+ floppy->progress_indication = buf[15] & 0x80 ?
+ (u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
+
+ if (floppy->failed_pc)
+ debug_log("pc = %x, sense key = %x, asc = %x,"
+ " ascq = %x\n",
+ floppy->failed_pc->c[0],
+ floppy->sense_key,
+ floppy->asc,
+ floppy->ascq);
+ else
+ debug_log("sense key = %x, asc = %x, ascq = %x\n",
+ floppy->sense_key,
+ floppy->asc,
+ floppy->ascq);
+
+
idefloppy_do_end_request(drive, 1, 0);
} else {
- printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting request!\n");
+ printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting"
+ " request!\n");
idefloppy_do_end_request(drive, 0, 0);
}
}
-/*
- * General packet command callback function.
- */
-static void idefloppy_pc_callback (ide_drive_t *drive)
+/* General packet command callback function. */
+static void idefloppy_pc_callback(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
-
- debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__);
+
+ debug_log("Reached %s\n", __func__);
idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0);
}
-/*
- * idefloppy_init_pc initializes a packet command.
- */
-static void idefloppy_init_pc (idefloppy_pc_t *pc)
+static void idefloppy_init_pc(idefloppy_pc_t *pc)
{
memset(pc->c, 0, 12);
pc->retries = 0;
@@ -694,21 +447,20 @@ static void idefloppy_init_pc (idefloppy_pc_t *pc)
pc->callback = &idefloppy_pc_callback;
}
-static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc)
+static void idefloppy_create_request_sense_cmd(idefloppy_pc_t *pc)
{
- idefloppy_init_pc(pc);
- pc->c[0] = IDEFLOPPY_REQUEST_SENSE_CMD;
+ idefloppy_init_pc(pc);
+ pc->c[0] = GPCMD_REQUEST_SENSE;
pc->c[4] = 255;
pc->request_transfer = 18;
pc->callback = &idefloppy_request_sense_callback;
}
/*
- * idefloppy_retry_pc is called when an error was detected during the
- * last packet command. We queue a request sense packet command in
- * the head of the request list.
+ * Called when an error was detected during the last packet command. We queue a
+ * request sense packet command in the head of the request list.
*/
-static void idefloppy_retry_pc (ide_drive_t *drive)
+static void idefloppy_retry_pc(ide_drive_t *drive)
{
idefloppy_pc_t *pc;
struct request *rq;
@@ -720,49 +472,50 @@ static void idefloppy_retry_pc (ide_drive_t *drive)
idefloppy_queue_pc_head(drive, pc, rq);
}
-/*
- * idefloppy_pc_intr is the usual interrupt handler which will be called
- * during a packet command.
- */
+/* The usual interrupt handler called during a packet command. */
static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
idefloppy_pc_t *pc = floppy->pc;
struct request *rq = pc->rq;
+ xfer_func_t *xferfunc;
unsigned int temp;
+ int dma_error = 0;
u16 bcount;
u8 stat, ireason;
- debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n",
- __FUNCTION__);
+ debug_log("Reached %s interrupt handler\n", __func__);
- if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
- if (HWIF(drive)->ide_dma_end(drive)) {
- set_bit(PC_DMA_ERROR, &pc->flags);
+ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
+ dma_error = hwif->ide_dma_end(drive);
+ if (dma_error) {
+ printk(KERN_ERR "%s: DMA %s error\n", drive->name,
+ rq_data_dir(rq) ? "write" : "read");
+ pc->flags |= PC_FLAG_DMA_ERROR;
} else {
pc->actually_transferred = pc->request_transfer;
idefloppy_update_buffers(drive, pc);
}
- debug_log(KERN_INFO "ide-floppy: DMA finished\n");
+ debug_log("DMA finished\n");
}
/* Clear the interrupt */
stat = drive->hwif->INB(IDE_STATUS_REG);
- if ((stat & DRQ_STAT) == 0) { /* No more interrupts */
- debug_log(KERN_INFO "Packet command completed, %d bytes "
- "transferred\n", pc->actually_transferred);
- clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+ /* No more interrupts */
+ if ((stat & DRQ_STAT) == 0) {
+ debug_log("Packet command completed, %d bytes transferred\n",
+ pc->actually_transferred);
+ pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
local_irq_enable_in_hardirq();
- if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
+ if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
/* Error detected */
- debug_log(KERN_INFO "ide-floppy: %s: I/O error\n",
- drive->name);
+ debug_log("%s: I/O error\n", drive->name);
rq->errors++;
- if (pc->c[0] == IDEFLOPPY_REQUEST_SENSE_CMD) {
+ if (pc->c[0] == GPCMD_REQUEST_SENSE) {
printk(KERN_ERR "ide-floppy: I/O error in "
"request sense command\n");
return ide_do_reset(drive);
@@ -780,7 +533,8 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
return ide_stopped;
}
- if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
+ pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
printk(KERN_ERR "ide-floppy: The floppy wants to issue "
"more interrupts in DMA mode\n");
ide_dma_off(drive);
@@ -794,10 +548,10 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
ireason = hwif->INB(IDE_IREASON_REG);
if (ireason & CD) {
- printk(KERN_ERR "ide-floppy: CoD != 0 in idefloppy_pc_intr\n");
+ printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__);
return ide_do_reset(drive);
}
- if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) {
+ if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
/* Hopefully, we will never get here */
printk(KERN_ERR "ide-floppy: We wanted to %s, ",
(ireason & IO) ? "Write" : "Read");
@@ -805,7 +559,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
(ireason & IO) ? "Read" : "Write");
return ide_do_reset(drive);
}
- if (!test_bit(PC_WRITING, &pc->flags)) {
+ if (!(pc->flags & PC_FLAG_WRITING)) {
/* Reading - Check that we have enough space */
temp = pc->actually_transferred + bcount;
if (temp > pc->request_transfer) {
@@ -814,39 +568,34 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
"to send us more data than expected "
"- discarding data\n");
idefloppy_discard_data(drive, bcount);
- BUG_ON(HWGROUP(drive)->handler != NULL);
+
ide_set_handler(drive,
&idefloppy_pc_intr,
IDEFLOPPY_WAIT_CMD,
NULL);
return ide_started;
}
- debug_log(KERN_NOTICE "ide-floppy: The floppy wants to "
- "send us more data than expected - "
- "allowing transfer\n");
+ debug_log("The floppy wants to send us more data than"
+ " expected - allowing transfer\n");
}
}
- if (test_bit(PC_WRITING, &pc->flags)) {
- if (pc->buffer != NULL)
- /* Write the current buffer */
- hwif->atapi_output_bytes(drive, pc->current_position,
- bcount);
- else
- idefloppy_output_buffers(drive, pc, bcount);
- } else {
- if (pc->buffer != NULL)
- /* Read the current buffer */
- hwif->atapi_input_bytes(drive, pc->current_position,
- bcount);
- else
- idefloppy_input_buffers(drive, pc, bcount);
- }
+ if (pc->flags & PC_FLAG_WRITING)
+ xferfunc = hwif->atapi_output_bytes;
+ else
+ xferfunc = hwif->atapi_input_bytes;
+
+ if (pc->buffer)
+ xferfunc(drive, pc->current_position, bcount);
+ else
+ ide_floppy_io_buffers(drive, pc, bcount,
+ !!(pc->flags & PC_FLAG_WRITING));
+
/* Update the current position */
pc->actually_transferred += bcount;
pc->current_position += bcount;
- BUG_ON(HWGROUP(drive)->handler != NULL);
- ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* And set the interrupt handler again */
+ /* And set the interrupt handler again */
+ ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
return ide_started;
}
@@ -855,7 +604,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
* It fails at high speeds on the Iomega ZIP drive, so there's a slower version
* for that drive below. The algorithm is chosen based on drive type
*/
-static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive)
+static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive)
{
ide_startstop_t startstop;
idefloppy_floppy_t *floppy = drive->driver_data;
@@ -872,7 +621,7 @@ static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive)
"issuing a packet command\n");
return ide_do_reset(drive);
}
- BUG_ON(HWGROUP(drive)->handler != NULL);
+
/* Set the interrupt routine */
ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
/* Send the actual packet */
@@ -882,18 +631,16 @@ static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive)
/*
- * What we have here is a classic case of a top half / bottom half
- * interrupt service routine. In interrupt mode, the device sends
- * an interrupt to signal it's ready to receive a packet. However,
- * we need to delay about 2-3 ticks before issuing the packet or we
- * gets in trouble.
+ * What we have here is a classic case of a top half / bottom half interrupt
+ * service routine. In interrupt mode, the device sends an interrupt to signal
+ * that it is ready to receive a packet. However, we need to delay about 2-3
+ * ticks before issuing the packet or we gets in trouble.
*
- * So, follow carefully. transfer_pc1 is called as an interrupt (or
- * directly). In either case, when the device says it's ready for a
- * packet, we schedule the packet transfer to occur about 2-3 ticks
- * later in transfer_pc2.
+ * So, follow carefully. transfer_pc1 is called as an interrupt (or directly).
+ * In either case, when the device says it's ready for a packet, we schedule
+ * the packet transfer to occur about 2-3 ticks later in transfer_pc2.
*/
-static int idefloppy_transfer_pc2 (ide_drive_t *drive)
+static int idefloppy_transfer_pc2(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
@@ -903,7 +650,7 @@ static int idefloppy_transfer_pc2 (ide_drive_t *drive)
return IDEFLOPPY_WAIT_CMD;
}
-static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
+static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_startstop_t startstop;
@@ -920,7 +667,7 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
"while issuing a packet command\n");
return ide_do_reset(drive);
}
- /*
+ /*
* The following delay solves a problem with ATAPI Zip 100 drives
* where the Busy flag was apparently being deasserted before the
* unit was ready to receive data. This was happening on a
@@ -928,32 +675,30 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
* 40 and 50msec work well. idefloppy_pc_intr will not be actually
* used until after the packet is moved in about 50 msec.
*/
- BUG_ON(HWGROUP(drive)->handler != NULL);
- ide_set_handler(drive,
- &idefloppy_pc_intr, /* service routine for packet command */
- floppy->ticks, /* wait this long before "failing" */
- &idefloppy_transfer_pc2); /* fail == transfer_pc2 */
+
+ ide_set_handler(drive, &idefloppy_pc_intr, floppy->ticks,
+ &idefloppy_transfer_pc2);
return ide_started;
}
-/**
- * idefloppy_should_report_error()
- *
- * Supresses error messages resulting from Medium not present
- */
-static inline int idefloppy_should_report_error(idefloppy_floppy_t *floppy)
+static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
+ idefloppy_pc_t *pc)
{
+ /* supress error messages resulting from Medium not present */
if (floppy->sense_key == 0x02 &&
floppy->asc == 0x3a &&
floppy->ascq == 0x00)
- return 0;
- return 1;
+ return;
+
+ printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, "
+ "asc = %2x, ascq = %2x\n",
+ floppy->drive->name, pc->c[0], floppy->sense_key,
+ floppy->asc, floppy->ascq);
+
}
-/*
- * Issue a packet command
- */
-static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *pc)
+static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
+ idefloppy_pc_t *pc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
@@ -962,36 +707,23 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p
u8 dma;
if (floppy->failed_pc == NULL &&
- pc->c[0] != IDEFLOPPY_REQUEST_SENSE_CMD)
+ pc->c[0] != GPCMD_REQUEST_SENSE)
floppy->failed_pc = pc;
/* Set the current packet command */
floppy->pc = pc;
- if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES ||
- test_bit(PC_ABORT, &pc->flags)) {
- /*
- * We will "abort" retrying a packet command in case
- * a legitimate error code was received.
- */
- if (!test_bit(PC_ABORT, &pc->flags)) {
- if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) {
- if (idefloppy_should_report_error(floppy))
- printk(KERN_ERR "ide-floppy: %s: I/O error, "
- "pc = %2x, key = %2x, "
- "asc = %2x, ascq = %2x\n",
- drive->name, pc->c[0],
- floppy->sense_key,
- floppy->asc, floppy->ascq);
- }
- /* Giving up */
- pc->error = IDEFLOPPY_ERROR_GENERAL;
- }
+ if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
+ if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
+ ide_floppy_report_error(floppy, pc);
+ /* Giving up */
+ pc->error = IDEFLOPPY_ERROR_GENERAL;
+
floppy->failed_pc = NULL;
pc->callback(drive);
return ide_stopped;
}
- debug_log(KERN_INFO "Retry number - %d\n",pc->retries);
+ debug_log("Retry number - %d\n", pc->retries);
pc->retries++;
/* We haven't transferred any data yet */
@@ -999,24 +731,26 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p
pc->current_position = pc->buffer;
bcount = min(pc->request_transfer, 63 * 1024);
- if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags))
+ if (pc->flags & PC_FLAG_DMA_ERROR) {
+ pc->flags &= ~PC_FLAG_DMA_ERROR;
ide_dma_off(drive);
-
+ }
dma = 0;
- if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
+ if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
dma = !hwif->dma_setup(drive);
ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
IDE_TFLAG_OUT_DEVICE, bcount, dma);
- if (dma) { /* Begin DMA, if necessary */
- set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+ if (dma) {
+ /* Begin DMA, if necessary */
+ pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
hwif->dma_start(drive);
}
/* Can we transfer the packet when we get the interrupt or wait? */
- if (test_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags)) {
+ if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) {
/* wait */
pkt_xfer_routine = &idefloppy_transfer_pc1;
} else {
@@ -1024,7 +758,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p
pkt_xfer_routine = &idefloppy_transfer_pc;
}
- if (test_bit (IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags)) {
+ if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) {
/* Issue the packet command */
ide_execute_command(drive, WIN_PACKETCMD,
pkt_xfer_routine,
@@ -1038,38 +772,37 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p
}
}
-static void idefloppy_rw_callback (ide_drive_t *drive)
+static void idefloppy_rw_callback(ide_drive_t *drive)
{
- debug_log(KERN_INFO "ide-floppy: Reached idefloppy_rw_callback\n");
+ debug_log("Reached %s\n", __func__);
idefloppy_do_end_request(drive, 1, 0);
return;
}
-static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent)
+static void idefloppy_create_prevent_cmd(idefloppy_pc_t *pc, int prevent)
{
- debug_log(KERN_INFO "ide-floppy: creating prevent removal command, "
- "prevent = %d\n", prevent);
+ debug_log("creating prevent removal command, prevent = %d\n", prevent);
idefloppy_init_pc(pc);
- pc->c[0] = IDEFLOPPY_PREVENT_REMOVAL_CMD;
+ pc->c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
pc->c[4] = prevent;
}
-static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t *pc)
+static void idefloppy_create_read_capacity_cmd(idefloppy_pc_t *pc)
{
idefloppy_init_pc(pc);
- pc->c[0] = IDEFLOPPY_READ_CAPACITY_CMD;
+ pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
pc->c[7] = 255;
pc->c[8] = 255;
pc->request_transfer = 255;
}
-static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l,
+static void idefloppy_create_format_unit_cmd(idefloppy_pc_t *pc, int b, int l,
int flags)
{
idefloppy_init_pc(pc);
- pc->c[0] = IDEFLOPPY_FORMAT_UNIT_CMD;
+ pc->c[0] = GPCMD_FORMAT_UNIT;
pc->c[1] = 0x17;
memset(pc->buffer, 0, 12);
@@ -1080,83 +813,79 @@ static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l,
pc->buffer[1] ^= 0x20; /* ... turn off DCRT bit */
pc->buffer[3] = 8;
- put_unaligned(htonl(b), (unsigned int *)(&pc->buffer[4]));
- put_unaligned(htonl(l), (unsigned int *)(&pc->buffer[8]));
- pc->buffer_size=12;
- set_bit(PC_WRITING, &pc->flags);
+ put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4]));
+ put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8]));
+ pc->buffer_size = 12;
+ pc->flags |= PC_FLAG_WRITING;
}
-/*
- * A mode sense command is used to "sense" floppy parameters.
- */
-static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u8 type)
+/* A mode sense command is used to "sense" floppy parameters. */
+static void idefloppy_create_mode_sense_cmd(idefloppy_pc_t *pc, u8 page_code,
+ u8 type)
{
- u16 length = sizeof(idefloppy_mode_parameter_header_t);
-
+ u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
+
idefloppy_init_pc(pc);
- pc->c[0] = IDEFLOPPY_MODE_SENSE_CMD;
+ pc->c[0] = GPCMD_MODE_SENSE_10;
pc->c[1] = 0;
pc->c[2] = page_code + (type << 6);
switch (page_code) {
- case IDEFLOPPY_CAPABILITIES_PAGE:
- length += 12;
- break;
- case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
- length += 32;
- break;
- default:
- printk(KERN_ERR "ide-floppy: unsupported page code "
+ case IDEFLOPPY_CAPABILITIES_PAGE:
+ length += 12;
+ break;
+ case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
+ length += 32;
+ break;
+ default:
+ printk(KERN_ERR "ide-floppy: unsupported page code "
"in create_mode_sense_cmd\n");
}
- put_unaligned(htons(length), (u16 *) &pc->c[7]);
+ put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
pc->request_transfer = length;
}
-static void idefloppy_create_start_stop_cmd (idefloppy_pc_t *pc, int start)
+static void idefloppy_create_start_stop_cmd(idefloppy_pc_t *pc, int start)
{
idefloppy_init_pc(pc);
- pc->c[0] = IDEFLOPPY_START_STOP_CMD;
+ pc->c[0] = GPCMD_START_STOP_UNIT;
pc->c[4] = start;
}
static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc)
{
idefloppy_init_pc(pc);
- pc->c[0] = IDEFLOPPY_TEST_UNIT_READY_CMD;
+ pc->c[0] = GPCMD_TEST_UNIT_READY;
}
-static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq, unsigned long sector)
+static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
+ idefloppy_pc_t *pc, struct request *rq,
+ unsigned long sector)
{
int block = sector / floppy->bs_factor;
int blocks = rq->nr_sectors / floppy->bs_factor;
int cmd = rq_data_dir(rq);
- debug_log("create_rw1%d_cmd: block == %d, blocks == %d\n",
- 2 * test_bit (IDEFLOPPY_USE_READ12, &floppy->flags),
+ debug_log("create_rw10_cmd: block == %d, blocks == %d\n",
block, blocks);
idefloppy_init_pc(pc);
- if (test_bit(IDEFLOPPY_USE_READ12, &floppy->flags)) {
- pc->c[0] = cmd == READ ? IDEFLOPPY_READ12_CMD : IDEFLOPPY_WRITE12_CMD;
- put_unaligned(htonl(blocks), (unsigned int *) &pc->c[6]);
- } else {
- pc->c[0] = cmd == READ ? IDEFLOPPY_READ10_CMD : IDEFLOPPY_WRITE10_CMD;
- put_unaligned(htons(blocks), (unsigned short *) &pc->c[7]);
- }
- put_unaligned(htonl(block), (unsigned int *) &pc->c[2]);
+ pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
+ put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
+ put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
+
pc->callback = &idefloppy_rw_callback;
pc->rq = rq;
pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
if (rq->cmd_flags & REQ_RW)
- set_bit(PC_WRITING, &pc->flags);
+ pc->flags |= PC_FLAG_WRITING;
pc->buffer = NULL;
pc->request_transfer = pc->buffer_size = blocks * floppy->block_size;
- set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+ pc->flags |= PC_FLAG_DMA_RECOMMENDED;
}
-static void
-idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq)
+static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
+ idefloppy_pc_t *pc, struct request *rq)
{
idefloppy_init_pc(pc);
pc->callback = &idefloppy_rw_callback;
@@ -1164,11 +893,10 @@ idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct req
pc->rq = rq;
pc->b_count = rq->data_len;
if (rq->data_len && rq_data_dir(rq) == WRITE)
- set_bit(PC_WRITING, &pc->flags);
+ pc->flags |= PC_FLAG_WRITING;
pc->buffer = rq->data;
if (rq->bio)
- set_bit(PC_DMA_RECOMMENDED, &pc->flags);
-
+ pc->flags |= PC_FLAG_DMA_RECOMMENDED;
/*
* possibly problematic, doesn't look like ide-floppy correctly
* handled scattered requests if dma fails...
@@ -1176,30 +904,23 @@ idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct req
pc->request_transfer = pc->buffer_size = rq->data_len;
}
-/*
- * idefloppy_do_request is our request handling function.
- */
-static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request *rq, sector_t block_s)
+static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
+ struct request *rq, sector_t block_s)
{
idefloppy_floppy_t *floppy = drive->driver_data;
idefloppy_pc_t *pc;
unsigned long block = (unsigned long)block_s;
- debug_log(KERN_INFO "dev: %s, flags: %lx, errors: %d\n",
+ debug_log("dev: %s, cmd_type: %x, errors: %d\n",
rq->rq_disk ? rq->rq_disk->disk_name : "?",
- rq->flags, rq->errors);
- debug_log(KERN_INFO "sector: %ld, nr_sectors: %ld, "
+ rq->cmd_type, rq->errors);
+ debug_log("sector: %ld, nr_sectors: %ld, "
"current_nr_sectors: %d\n", (long)rq->sector,
rq->nr_sectors, rq->current_nr_sectors);
if (rq->errors >= ERROR_MAX) {
- if (floppy->failed_pc != NULL) {
- if (idefloppy_should_report_error(floppy))
- printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x,"
- " key = %2x, asc = %2x, ascq = %2x\n",
- drive->name, floppy->failed_pc->c[0],
- floppy->sense_key, floppy->asc, floppy->ascq);
- }
+ if (floppy->failed_pc)
+ ide_floppy_report_error(floppy, floppy->failed_pc);
else
printk(KERN_ERR "ide-floppy: %s: I/O error\n",
drive->name);
@@ -1209,8 +930,8 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request
if (blk_fs_request(rq)) {
if (((long)rq->sector % floppy->bs_factor) ||
(rq->nr_sectors % floppy->bs_factor)) {
- printk("%s: unsupported r/w request size\n",
- drive->name);
+ printk(KERN_ERR "%s: unsupported r/w request size\n",
+ drive->name);
idefloppy_do_end_request(drive, 0, 0);
return ide_stopped;
}
@@ -1233,15 +954,15 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request
}
/*
- * idefloppy_queue_pc_tail adds a special packet command request to the
- * tail of the request queue, and waits for it to be serviced.
+ * Add a special packet command request to the tail of the request queue,
+ * and wait for it to be serviced.
*/
-static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc)
+static int idefloppy_queue_pc_tail(ide_drive_t *drive, idefloppy_pc_t *pc)
{
struct ide_floppy_obj *floppy = drive->driver_data;
struct request rq;
- ide_init_drive_cmd (&rq);
+ ide_init_drive_cmd(&rq);
rq.buffer = (char *) pc;
rq.cmd_type = REQ_TYPE_SPECIAL;
rq.rq_disk = floppy->disk;
@@ -1250,88 +971,90 @@ static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc)
}
/*
- * Look at the flexible disk page parameters. We will ignore the CHS
- * capacity parameters and use the LBA parameters instead.
+ * Look at the flexible disk page parameters. We ignore the CHS capacity
+ * parameters and use the LBA parameters instead.
*/
-static int idefloppy_get_flexible_disk_page (ide_drive_t *drive)
+static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
idefloppy_pc_t pc;
- idefloppy_mode_parameter_header_t *header;
- idefloppy_flexible_disk_page_t *page;
+ u8 *page;
int capacity, lba_capacity;
+ u16 transfer_rate, sector_size, cyls, rpm;
+ u8 heads, sectors;
+
+ idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE,
+ MODE_SENSE_CURRENT);
- idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, MODE_SENSE_CURRENT);
- if (idefloppy_queue_pc_tail(drive,&pc)) {
- printk(KERN_ERR "ide-floppy: Can't get flexible disk "
- "page parameters\n");
+ if (idefloppy_queue_pc_tail(drive, &pc)) {
+ printk(KERN_ERR "ide-floppy: Can't get flexible disk page"
+ " parameters\n");
return 1;
}
- header = (idefloppy_mode_parameter_header_t *) pc.buffer;
- floppy->wp = header->wp;
+ floppy->wp = !!(pc.buffer[3] & 0x80);
set_disk_ro(floppy->disk, floppy->wp);
- page = (idefloppy_flexible_disk_page_t *) (header + 1);
-
- page->transfer_rate = ntohs(page->transfer_rate);
- page->sector_size = ntohs(page->sector_size);
- page->cyls = ntohs(page->cyls);
- page->rpm = ntohs(page->rpm);
- capacity = page->cyls * page->heads * page->sectors * page->sector_size;
- if (memcmp (page, &floppy->flexible_disk_page, sizeof (idefloppy_flexible_disk_page_t)))
+ page = &pc.buffer[8];
+
+ transfer_rate = be16_to_cpu(*(u16 *)&pc.buffer[8 + 2]);
+ sector_size = be16_to_cpu(*(u16 *)&pc.buffer[8 + 6]);
+ cyls = be16_to_cpu(*(u16 *)&pc.buffer[8 + 8]);
+ rpm = be16_to_cpu(*(u16 *)&pc.buffer[8 + 28]);
+ heads = pc.buffer[8 + 4];
+ sectors = pc.buffer[8 + 5];
+
+ capacity = cyls * heads * sectors * sector_size;
+
+ if (memcmp(page, &floppy->flexible_disk_page, 32))
printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, "
"%d sector size, %d rpm\n",
- drive->name, capacity / 1024, page->cyls,
- page->heads, page->sectors,
- page->transfer_rate / 8, page->sector_size, page->rpm);
-
- floppy->flexible_disk_page = *page;
- drive->bios_cyl = page->cyls;
- drive->bios_head = page->heads;
- drive->bios_sect = page->sectors;
+ drive->name, capacity / 1024, cyls, heads,
+ sectors, transfer_rate / 8, sector_size, rpm);
+
+ memcpy(&floppy->flexible_disk_page, page, 32);
+ drive->bios_cyl = cyls;
+ drive->bios_head = heads;
+ drive->bios_sect = sectors;
lba_capacity = floppy->blocks * floppy->block_size;
+
if (capacity < lba_capacity) {
printk(KERN_NOTICE "%s: The disk reports a capacity of %d "
"bytes, but the drive only handles %d\n",
drive->name, lba_capacity, capacity);
- floppy->blocks = floppy->block_size ? capacity / floppy->block_size : 0;
+ floppy->blocks = floppy->block_size ?
+ capacity / floppy->block_size : 0;
}
return 0;
}
-static int idefloppy_get_capability_page(ide_drive_t *drive)
+static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
idefloppy_pc_t pc;
- idefloppy_mode_parameter_header_t *header;
- idefloppy_capabilities_page_t *page;
floppy->srfp = 0;
idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE,
MODE_SENSE_CURRENT);
- set_bit(PC_SUPPRESS_ERROR, &pc.flags);
- if (idefloppy_queue_pc_tail(drive,&pc)) {
+ pc.flags |= PC_FLAG_SUPPRESS_ERROR;
+ if (idefloppy_queue_pc_tail(drive, &pc))
return 1;
- }
- header = (idefloppy_mode_parameter_header_t *) pc.buffer;
- page= (idefloppy_capabilities_page_t *)(header+1);
- floppy->srfp = page->srfp;
+ floppy->srfp = pc.buffer[8 + 2] & 0x40;
return (0);
}
/*
- * Determine if a media is present in the floppy drive, and if so,
- * its LBA capacity.
+ * Determine if a media is present in the floppy drive, and if so, its LBA
+ * capacity.
*/
-static int idefloppy_get_capacity (ide_drive_t *drive)
+static int ide_floppy_get_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
idefloppy_pc_t pc;
- idefloppy_capacity_header_t *header;
- idefloppy_capacity_descriptor_t *descriptor;
- int i, descriptors, rc = 1, blocks, length;
-
+ u8 *cap_desc;
+ u8 header_len, desc_cnt;
+ int i, rc = 1, blocks, length;
+
drive->bios_cyl = 0;
drive->bios_head = drive->bios_sect = 0;
floppy->blocks = 0;
@@ -1343,44 +1066,55 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
return 1;
}
- header = (idefloppy_capacity_header_t *) pc.buffer;
- descriptors = header->length / sizeof(idefloppy_capacity_descriptor_t);
- descriptor = (idefloppy_capacity_descriptor_t *) (header + 1);
+ header_len = pc.buffer[3];
+ cap_desc = &pc.buffer[4];
+ desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
+
+ for (i = 0; i < desc_cnt; i++) {
+ unsigned int desc_start = 4 + i*8;
+
+ blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]);
+ length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]);
- for (i = 0; i < descriptors; i++, descriptor++) {
- blocks = descriptor->blocks = ntohl(descriptor->blocks);
- length = descriptor->length = ntohs(descriptor->length);
+ debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
+ i, blocks * length / 1024, blocks, length);
- if (!i)
- {
- switch (descriptor->dc) {
+ if (i)
+ continue;
+ /*
+ * the code below is valid only for the 1st descriptor, ie i=0
+ */
+
+ switch (pc.buffer[desc_start + 4] & 0x03) {
/* Clik! drive returns this instead of CAPACITY_CURRENT */
case CAPACITY_UNFORMATTED:
- if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags))
- /*
+ if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE))
+ /*
* If it is not a clik drive, break out
* (maintains previous driver behaviour)
*/
break;
case CAPACITY_CURRENT:
/* Normal Zip/LS-120 disks */
- if (memcmp(descriptor, &floppy->capacity, sizeof (idefloppy_capacity_descriptor_t)))
+ if (memcmp(cap_desc, &floppy->cap_desc, 8))
printk(KERN_INFO "%s: %dkB, %d blocks, %d "
"sector size\n", drive->name,
blocks * length / 1024, blocks, length);
- floppy->capacity = *descriptor;
+ memcpy(&floppy->cap_desc, cap_desc, 8);
+
if (!length || length % 512) {
printk(KERN_NOTICE "%s: %d bytes block size "
"not supported\n", drive->name, length);
} else {
- floppy->blocks = blocks;
- floppy->block_size = length;
- if ((floppy->bs_factor = length / 512) != 1)
- printk(KERN_NOTICE "%s: warning: non "
+ floppy->blocks = blocks;
+ floppy->block_size = length;
+ floppy->bs_factor = length / 512;
+ if (floppy->bs_factor != 1)
+ printk(KERN_NOTICE "%s: warning: non "
"512 bytes block size not "
"fully supported\n",
drive->name);
- rc = 0;
+ rc = 0;
}
break;
case CAPACITY_NO_CARTRIDGE:
@@ -1395,54 +1129,42 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
"in drive\n", drive->name);
break;
}
- }
- if (!i) {
- debug_log( "Descriptor 0 Code: %d\n",
- descriptor->dc);
- }
- debug_log( "Descriptor %d: %dkB, %d blocks, %d "
- "sector size\n", i, blocks * length / 1024, blocks,
- length);
+ debug_log("Descriptor 0 Code: %d\n",
+ pc.buffer[desc_start + 4] & 0x03);
}
/* Clik! disk does not support get_flexible_disk_page */
- if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
- (void) idefloppy_get_flexible_disk_page(drive);
- }
+ if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE))
+ (void) ide_floppy_get_flexible_disk_page(drive);
set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor);
return rc;
}
/*
-** Obtain the list of formattable capacities.
-** Very similar to idefloppy_get_capacity, except that we push the capacity
-** descriptors to userland, instead of our own structures.
-**
-** Userland gives us the following structure:
-**
-** struct idefloppy_format_capacities {
-** int nformats;
-** struct {
-** int nblocks;
-** int blocksize;
-** } formats[];
-** } ;
-**
-** userland initializes nformats to the number of allocated formats[]
-** records. On exit we set nformats to the number of records we've
-** actually initialized.
-**
-*/
-
-static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
+ * Obtain the list of formattable capacities.
+ * Very similar to ide_floppy_get_capacity, except that we push the capacity
+ * descriptors to userland, instead of our own structures.
+ *
+ * Userland gives us the following structure:
+ *
+ * struct idefloppy_format_capacities {
+ * int nformats;
+ * struct {
+ * int nblocks;
+ * int blocksize;
+ * } formats[];
+ * };
+ *
+ * userland initializes nformats to the number of allocated formats[] records.
+ * On exit we set nformats to the number of records we've actually initialized.
+ */
+
+static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
{
- idefloppy_pc_t pc;
- idefloppy_capacity_header_t *header;
- idefloppy_capacity_descriptor_t *descriptor;
- int i, descriptors, blocks, length;
- int u_array_size;
- int u_index;
+ idefloppy_pc_t pc;
+ u8 header_len, desc_cnt;
+ int i, blocks, length, u_array_size, u_index;
int __user *argp;
if (get_user(u_array_size, arg))
@@ -1454,30 +1176,27 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
idefloppy_create_read_capacity_cmd(&pc);
if (idefloppy_queue_pc_tail(drive, &pc)) {
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
- return (-EIO);
- }
- header = (idefloppy_capacity_header_t *) pc.buffer;
- descriptors = header->length /
- sizeof(idefloppy_capacity_descriptor_t);
- descriptor = (idefloppy_capacity_descriptor_t *) (header + 1);
+ return (-EIO);
+ }
+ header_len = pc.buffer[3];
+ desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
u_index = 0;
argp = arg + 1;
/*
- ** We always skip the first capacity descriptor. That's the
- ** current capacity. We are interested in the remaining descriptors,
- ** the formattable capacities.
- */
+ * We always skip the first capacity descriptor. That's the current
+ * capacity. We are interested in the remaining descriptors, the
+ * formattable capacities.
+ */
+ for (i = 1; i < desc_cnt; i++) {
+ unsigned int desc_start = 4 + i*8;
- for (i=0; i<descriptors; i++, descriptor++) {
if (u_index >= u_array_size)
break; /* User-supplied buffer too small */
- if (i == 0)
- continue; /* Skip the first descriptor */
- blocks = ntohl(descriptor->blocks);
- length = ntohs(descriptor->length);
+ blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]);
+ length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]);
if (put_user(blocks, argp))
return(-EFAULT);
@@ -1496,53 +1215,14 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
}
/*
-** Send ATAPI_FORMAT_UNIT to the drive.
-**
-** Userland gives us the following structure:
-**
-** struct idefloppy_format_command {
-** int nblocks;
-** int blocksize;
-** int flags;
-** } ;
-**
-** flags is a bitmask, currently, the only defined flag is:
-**
-** 0x01 - verify media after format.
-*/
-
-static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg)
-{
- int blocks;
- int length;
- int flags;
- idefloppy_pc_t pc;
-
- if (get_user(blocks, arg) ||
- get_user(length, arg+1) ||
- get_user(flags, arg+2)) {
- return (-EFAULT);
- }
-
- /* Get the SFRP bit */
- (void) idefloppy_get_capability_page(drive);
- idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
- if (idefloppy_queue_pc_tail(drive, &pc)) {
- return (-EIO);
- }
-
- return (0);
-}
-
-/*
-** Get ATAPI_FORMAT_UNIT progress indication.
-**
-** Userland gives a pointer to an int. The int is set to a progress
-** indicator 0-65536, with 65536=100%.
-**
-** If the drive does not support format progress indication, we just check
-** the dsc bit, and return either 0 or 65536.
-*/
+ * Get ATAPI_FORMAT_UNIT progress indication.
+ *
+ * Userland gives a pointer to an int. The int is set to a progress
+ * indicator 0-65536, with 65536=100%.
+ *
+ * If the drive does not support format progress indication, we just check
+ * the dsc bit, and return either 0 or 65536.
+ */
static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
{
@@ -1552,17 +1232,15 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
if (floppy->srfp) {
idefloppy_create_request_sense_cmd(&pc);
- if (idefloppy_queue_pc_tail(drive, &pc)) {
+ if (idefloppy_queue_pc_tail(drive, &pc))
return (-EIO);
- }
if (floppy->sense_key == 2 &&
floppy->asc == 4 &&
- floppy->ascq == 4) {
+ floppy->ascq == 4)
progress_indication = floppy->progress_indication;
- }
- /* Else assume format_unit has finished, and we're
- ** at 0x10000 */
+
+ /* Else assume format_unit has finished, and we're at 0x10000 */
} else {
unsigned long flags;
u8 stat;
@@ -1579,10 +1257,7 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
return (0);
}
-/*
- * Return the current floppy capacity.
- */
-static sector_t idefloppy_capacity (ide_drive_t *drive)
+static sector_t idefloppy_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
unsigned long capacity = floppy->blocks * floppy->bs_factor;
@@ -1591,15 +1266,12 @@ static sector_t idefloppy_capacity (ide_drive_t *drive)
}
/*
- * idefloppy_identify_device checks if we can support a drive,
- * based on the ATAPI IDENTIFY command results.
+ * Check whether we can support a drive, based on the ATAPI IDENTIFY command
+ * results.
*/
-static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
+static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id)
{
struct idefloppy_id_gcw gcw;
-#if IDEFLOPPY_DEBUG_INFO
- char buffer[80];
-#endif /* IDEFLOPPY_DEBUG_INFO */
*((u16 *) &gcw) = id->config;
@@ -1608,54 +1280,23 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
if ((gcw.device_type == 5) &&
!strstr(id->model, "CD-ROM") &&
strstr(id->model, "ZIP"))
- gcw.device_type = 0;
+ gcw.device_type = 0;
#endif
-#if IDEFLOPPY_DEBUG_INFO
- printk(KERN_INFO "Dumping ATAPI Identify Device floppy parameters\n");
- switch (gcw.protocol) {
- case 0: case 1: sprintf(buffer, "ATA");break;
- case 2: sprintf(buffer, "ATAPI");break;
- case 3: sprintf(buffer, "Reserved (Unknown to ide-floppy)");break;
- }
- printk(KERN_INFO "Protocol Type: %s\n", buffer);
- switch (gcw.device_type) {
- case 0: sprintf(buffer, "Direct-access Device");break;
- case 1: sprintf(buffer, "Streaming Tape Device");break;
- case 2: case 3: case 4: sprintf (buffer, "Reserved");break;
- case 5: sprintf(buffer, "CD-ROM Device");break;
- case 6: sprintf(buffer, "Reserved");
- case 7: sprintf(buffer, "Optical memory Device");break;
- case 0x1f: sprintf(buffer, "Unknown or no Device type");break;
- default: sprintf(buffer, "Reserved");
- }
- printk(KERN_INFO "Device Type: %x - %s\n", gcw.device_type, buffer);
- printk(KERN_INFO "Removable: %s\n",gcw.removable ? "Yes":"No");
- switch (gcw.drq_type) {
- case 0: sprintf(buffer, "Microprocessor DRQ");break;
- case 1: sprintf(buffer, "Interrupt DRQ");break;
- case 2: sprintf(buffer, "Accelerated DRQ");break;
- case 3: sprintf(buffer, "Reserved");break;
- }
- printk(KERN_INFO "Command Packet DRQ Type: %s\n", buffer);
- switch (gcw.packet_size) {
- case 0: sprintf(buffer, "12 bytes");break;
- case 1: sprintf(buffer, "16 bytes");break;
- default: sprintf(buffer, "Reserved");break;
- }
- printk(KERN_INFO "Command Packet Size: %s\n", buffer);
-#endif /* IDEFLOPPY_DEBUG_INFO */
-
if (gcw.protocol != 2)
- printk(KERN_ERR "ide-floppy: Protocol is not ATAPI\n");
+ printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n",
+ gcw.protocol);
else if (gcw.device_type != 0)
- printk(KERN_ERR "ide-floppy: Device type is not set to floppy\n");
+ printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set "
+ "to floppy\n", gcw.device_type);
else if (!gcw.removable)
printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
else if (gcw.drq_type == 3) {
- printk(KERN_ERR "ide-floppy: Sorry, DRQ type %d not supported\n", gcw.drq_type);
+ printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not "
+ "supported\n", gcw.drq_type);
} else if (gcw.packet_size != 0) {
- printk(KERN_ERR "ide-floppy: Packet size is not 12 bytes long\n");
+ printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 "
+ "bytes long\n", gcw.packet_size);
} else
return 1;
return 0;
@@ -1666,59 +1307,53 @@ static void idefloppy_add_settings(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
-/*
- * drive setting name read/write data type min max mul_factor div_factor data pointer set function
- */
- ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL);
- ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL);
- ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL);
- ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &floppy->ticks, NULL);
+ ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1,
+ &drive->bios_cyl, NULL);
+ ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
+ &drive->bios_head, NULL);
+ ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1,
+ &drive->bios_sect, NULL);
+ ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
+ &floppy->ticks, NULL);
}
#else
static inline void idefloppy_add_settings(ide_drive_t *drive) { ; }
#endif
-/*
- * Driver initialization.
- */
-static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy)
+static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
{
struct idefloppy_id_gcw gcw;
*((u16 *) &gcw) = drive->id->config;
floppy->pc = floppy->pc_stack;
if (gcw.drq_type == 1)
- set_bit(IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags);
+ floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT;
/*
- * We used to check revisions here. At this point however
- * I'm giving up. Just assume they are all broken, its easier.
+ * We used to check revisions here. At this point however I'm giving up.
+ * Just assume they are all broken, its easier.
*
- * The actual reason for the workarounds was likely
- * a driver bug after all rather than a firmware bug,
- * and the workaround below used to hide it. It should
- * be fixed as of version 1.9, but to be on the safe side
- * we'll leave the limitation below for the 2.2.x tree.
+ * The actual reason for the workarounds was likely a driver bug after
+ * all rather than a firmware bug, and the workaround below used to hide
+ * it. It should be fixed as of version 1.9, but to be on the safe side
+ * we'll leave the limitation below for the 2.2.x tree.
*/
-
if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) {
- set_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags);
+ floppy->flags |= IDEFLOPPY_FLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
floppy->ticks = IDEFLOPPY_TICKS_DELAY;
blk_queue_max_sectors(drive->queue, 64);
}
/*
- * Guess what? The IOMEGA Clik! drive also needs the
- * above fix. It makes nasty clicking noises without
- * it, so please don't remove this.
- */
+ * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
+ * nasty clicking noises without it, so please don't remove this.
+ */
if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) {
blk_queue_max_sectors(drive->queue, 64);
- set_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags);
+ floppy->flags |= IDEFLOPPY_FLAG_CLIK_DRIVE;
}
-
- (void) idefloppy_get_capacity(drive);
+ (void) ide_floppy_get_capacity(drive);
idefloppy_add_settings(drive);
}
@@ -1734,7 +1369,7 @@ static void ide_floppy_remove(ide_drive_t *drive)
ide_floppy_put(floppy);
}
-static void ide_floppy_release(struct kref *kref)
+static void idefloppy_cleanup_obj(struct kref *kref)
{
struct ide_floppy_obj *floppy = to_ide_floppy(kref);
ide_drive_t *drive = floppy->drive;
@@ -1747,19 +1382,19 @@ static void ide_floppy_release(struct kref *kref)
}
#ifdef CONFIG_IDE_PROC_FS
-static int proc_idefloppy_read_capacity
- (char *page, char **start, off_t off, int count, int *eof, void *data)
+static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
{
ide_drive_t*drive = (ide_drive_t *)data;
int len;
- len = sprintf(page,"%llu\n", (long long)idefloppy_capacity(drive));
- PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
+ len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive));
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
}
static ide_proc_entry_t idefloppy_proc[] = {
- { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
- { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
+ { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
+ { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
{ NULL, 0, NULL, NULL }
};
#endif /* CONFIG_IDE_PROC_FS */
@@ -1794,9 +1429,10 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
idefloppy_pc_t pc;
int ret = 0;
- debug_log(KERN_INFO "Reached idefloppy_open\n");
+ debug_log("Reached %s\n", __func__);
- if (!(floppy = ide_floppy_get(disk)))
+ floppy = ide_floppy_get(disk);
+ if (!floppy)
return -ENXIO;
drive = floppy->drive;
@@ -1804,7 +1440,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
floppy->openers++;
if (floppy->openers == 1) {
- clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+ floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
/* Just in case */
idefloppy_create_test_unit_ready_cmd(&pc);
@@ -1813,13 +1449,13 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
(void) idefloppy_queue_pc_tail(drive, &pc);
}
- if (idefloppy_get_capacity (drive)
+ if (ide_floppy_get_capacity(drive)
&& (filp->f_flags & O_NDELAY) == 0
/*
- ** Allow O_NDELAY to open a drive without a disk, or with
- ** an unreadable disk, so that we can get the format
- ** capacity of the drive or begin the format - Sam
- */
+ * Allow O_NDELAY to open a drive without a disk, or with an
+ * unreadable disk, so that we can get the format capacity
+ * of the drive or begin the format - Sam
+ */
) {
ret = -EIO;
goto out_put_floppy;
@@ -1829,14 +1465,14 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
ret = -EROFS;
goto out_put_floppy;
}
- set_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags);
+ floppy->flags |= IDEFLOPPY_FLAG_MEDIA_CHANGED;
/* IOMEGA Clik! drives do not support lock/unlock commands */
- if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
+ if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
idefloppy_create_prevent_cmd(&pc, 1);
(void) idefloppy_queue_pc_tail(drive, &pc);
}
check_disk_change(inode->i_bdev);
- } else if (test_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags)) {
+ } else if (floppy->flags & IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS) {
ret = -EBUSY;
goto out_put_floppy;
}
@@ -1854,17 +1490,17 @@ static int idefloppy_release(struct inode *inode, struct file *filp)
struct ide_floppy_obj *floppy = ide_floppy_g(disk);
ide_drive_t *drive = floppy->drive;
idefloppy_pc_t pc;
-
- debug_log(KERN_INFO "Reached idefloppy_release\n");
+
+ debug_log("Reached %s\n", __func__);
if (floppy->openers == 1) {
/* IOMEGA Clik! drives do not support lock/unlock commands */
- if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
+ if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
idefloppy_create_prevent_cmd(&pc, 0);
(void) idefloppy_queue_pc_tail(drive, &pc);
}
- clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+ floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
}
floppy->openers--;
@@ -1885,64 +1521,105 @@ static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}
+static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc,
+ unsigned long arg, unsigned int cmd)
+{
+ if (floppy->openers > 1)
+ return -EBUSY;
+
+ /* The IOMEGA Clik! Drive doesn't support this command -
+ * no room for an eject mechanism */
+ if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
+ int prevent = arg ? 1 : 0;
+
+ if (cmd == CDROMEJECT)
+ prevent = 0;
+
+ idefloppy_create_prevent_cmd(pc, prevent);
+ (void) idefloppy_queue_pc_tail(floppy->drive, pc);
+ }
+
+ if (cmd == CDROMEJECT) {
+ idefloppy_create_start_stop_cmd(pc, 2);
+ (void) idefloppy_queue_pc_tail(floppy->drive, pc);
+ }
+
+ return 0;
+}
+
+static int ide_floppy_format_unit(idefloppy_floppy_t *floppy,
+ int __user *arg)
+{
+ int blocks, length, flags, err = 0;
+ idefloppy_pc_t pc;
+
+ if (floppy->openers > 1) {
+ /* Don't format if someone is using the disk */
+ floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
+ return -EBUSY;
+ }
+
+ floppy->flags |= IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
+
+ /*
+ * Send ATAPI_FORMAT_UNIT to the drive.
+ *
+ * Userland gives us the following structure:
+ *
+ * struct idefloppy_format_command {
+ * int nblocks;
+ * int blocksize;
+ * int flags;
+ * } ;
+ *
+ * flags is a bitmask, currently, the only defined flag is:
+ *
+ * 0x01 - verify media after format.
+ */
+ if (get_user(blocks, arg) ||
+ get_user(length, arg+1) ||
+ get_user(flags, arg+2)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ (void) idefloppy_get_sfrp_bit(floppy->drive);
+ idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
+
+ if (idefloppy_queue_pc_tail(floppy->drive, &pc))
+ err = -EIO;
+
+out:
+ if (err)
+ floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
+ return err;
+}
+
+
static int idefloppy_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
ide_drive_t *drive = floppy->drive;
+ idefloppy_pc_t pc;
void __user *argp = (void __user *)arg;
int err;
- int prevent = (arg) ? 1 : 0;
- idefloppy_pc_t pc;
switch (cmd) {
case CDROMEJECT:
- prevent = 0;
/* fall through */
case CDROM_LOCKDOOR:
- if (floppy->openers > 1)
- return -EBUSY;
-
- /* The IOMEGA Clik! Drive doesn't support this command - no room for an eject mechanism */
- if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
- idefloppy_create_prevent_cmd(&pc, prevent);
- (void) idefloppy_queue_pc_tail(drive, &pc);
- }
- if (cmd == CDROMEJECT) {
- idefloppy_create_start_stop_cmd(&pc, 2);
- (void) idefloppy_queue_pc_tail(drive, &pc);
- }
- return 0;
+ return ide_floppy_lockdoor(floppy, &pc, arg, cmd);
case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
return 0;
case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
- return idefloppy_get_format_capacities(drive, argp);
+ return ide_floppy_get_format_capacities(drive, argp);
case IDEFLOPPY_IOCTL_FORMAT_START:
-
if (!(file->f_mode & 2))
return -EPERM;
- if (floppy->openers > 1) {
- /* Don't format if someone is using the disk */
-
- clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS,
- &floppy->flags);
- return -EBUSY;
- }
-
- set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
-
- err = idefloppy_begin_format(drive, argp);
- if (err)
- clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
- return err;
- /*
- ** Note, the bit will be cleared when the device is
- ** closed. This is the cleanest way to handle the
- ** situation where the drive does not support
- ** format progress reporting.
- */
+ return ide_floppy_format_unit(floppy, (int __user *)arg);
case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
return idefloppy_get_format_progress(drive, argp);
}
@@ -1967,13 +1644,16 @@ static int idefloppy_media_changed(struct gendisk *disk)
{
struct ide_floppy_obj *floppy = ide_floppy_g(disk);
ide_drive_t *drive = floppy->drive;
+ int ret;
/* do not scan partitions twice if this is a removable device */
if (drive->attach) {
drive->attach = 0;
return 0;
}
- return test_and_clear_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags);
+ ret = !!(floppy->flags & IDEFLOPPY_FLAG_MEDIA_CHANGED);
+ floppy->flags &= ~IDEFLOPPY_FLAG_MEDIA_CHANGED;
+ return ret;
}
static int idefloppy_revalidate_disk(struct gendisk *disk)
@@ -2004,16 +1684,20 @@ static int ide_floppy_probe(ide_drive_t *drive)
goto failed;
if (drive->media != ide_floppy)
goto failed;
- if (!idefloppy_identify_device (drive, drive->id)) {
- printk (KERN_ERR "ide-floppy: %s: not supported by this version of ide-floppy\n", drive->name);
+ if (!idefloppy_identify_device(drive, drive->id)) {
+ printk(KERN_ERR "ide-floppy: %s: not supported by this version"
+ " of ide-floppy\n", drive->name);
goto failed;
}
if (drive->scsi) {
- printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name);
+ printk(KERN_INFO "ide-floppy: passing drive %s to ide-scsi"
+ " emulation.\n", drive->name);
goto failed;
}
- if ((floppy = kzalloc(sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) {
- printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name);
+ floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
+ if (!floppy) {
+ printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy"
+ " structure\n", drive->name);
goto failed;
}
@@ -2035,7 +1719,7 @@ static int ide_floppy_probe(ide_drive_t *drive)
drive->driver_data = floppy;
- idefloppy_setup (drive, floppy);
+ idefloppy_setup(drive, floppy);
g->minors = 1 << PARTN_BITS;
g->driverfs_dev = &drive->gendev;
@@ -2051,9 +1735,7 @@ failed:
return -ENODEV;
}
-MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
-
-static void __exit idefloppy_exit (void)
+static void __exit idefloppy_exit(void)
{
driver_unregister(&idefloppy_driver.gen_driver);
}
@@ -2068,3 +1750,5 @@ MODULE_ALIAS("ide:*m-floppy*");
module_init(idefloppy_init);
module_exit(idefloppy_exit);
MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
+
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index bb30c29f6ec0..be469dbbe8fb 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -23,7 +23,7 @@ static int __init ide_generic_init(void)
for (i = 0; i < MAX_HWIFS; i++)
idx[i] = ide_hwifs[i].present ? 0xff : i;
- ide_device_add_all(idx);
+ ide_device_add_all(idx, NULL);
if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET])
ide_release_lock(); /* for atari only */
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 16b1f6e12781..a95178f5e1bb 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -163,8 +163,6 @@ void SELECT_DRIVE (ide_drive_t *drive)
HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG);
}
-EXPORT_SYMBOL(SELECT_DRIVE);
-
void SELECT_MASK (ide_drive_t *drive, int mask)
{
if (HWIF(drive)->maskproc)
@@ -614,66 +612,6 @@ no_80w:
return 0;
}
-int ide_ata66_check (ide_drive_t *drive, ide_task_t *args)
-{
- if (args->tf.command == WIN_SETFEATURES &&
- args->tf.nsect > XFER_UDMA_2 &&
- args->tf.feature == SETFEATURES_XFER) {
- if (eighty_ninty_three(drive) == 0) {
- printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
- "be set\n", drive->name);
- return 1;
- }
- }
-
- return 0;
-}
-
-/*
- * Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER.
- * 1 : Safe to update drive->id DMA registers.
- * 0 : OOPs not allowed.
- */
-int set_transfer (ide_drive_t *drive, ide_task_t *args)
-{
- if (args->tf.command == WIN_SETFEATURES &&
- args->tf.nsect >= XFER_SW_DMA_0 &&
- args->tf.feature == SETFEATURES_XFER &&
- (drive->id->dma_ultra ||
- drive->id->dma_mword ||
- drive->id->dma_1word))
- return 1;
-
- return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
-static u8 ide_auto_reduce_xfer (ide_drive_t *drive)
-{
- if (!drive->crc_count)
- return drive->current_speed;
- drive->crc_count = 0;
-
- switch(drive->current_speed) {
- case XFER_UDMA_7: return XFER_UDMA_6;
- case XFER_UDMA_6: return XFER_UDMA_5;
- case XFER_UDMA_5: return XFER_UDMA_4;
- case XFER_UDMA_4: return XFER_UDMA_3;
- case XFER_UDMA_3: return XFER_UDMA_2;
- case XFER_UDMA_2: return XFER_UDMA_1;
- case XFER_UDMA_1: return XFER_UDMA_0;
- /*
- * OOPS we do not goto non Ultra DMA modes
- * without iCRC's available we force
- * the system to PIO and make the user
- * invoke the ATA-1 ATA-2 DMA modes.
- */
- case XFER_UDMA_0:
- default: return XFER_PIO_4;
- }
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-
int ide_driveid_update(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
@@ -882,22 +820,17 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,
unsigned long flags;
ide_hwgroup_t *hwgroup = HWGROUP(drive);
ide_hwif_t *hwif = HWIF(drive);
-
+
spin_lock_irqsave(&ide_lock, flags);
-
BUG_ON(hwgroup->handler);
- hwgroup->handler = handler;
- hwgroup->expiry = expiry;
- hwgroup->timer.expires = jiffies + timeout;
- hwgroup->req_gen_timer = hwgroup->req_gen;
- add_timer(&hwgroup->timer);
+ __ide_set_handler(drive, handler, timeout, expiry);
hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG);
- /* Drive takes 400nS to respond, we must avoid the IRQ being
- serviced before that.
-
- FIXME: we could skip this delay with care on non shared
- devices
- */
+ /*
+ * Drive takes 400nS to respond, we must avoid the IRQ being
+ * serviced before that.
+ *
+ * FIXME: we could skip this delay with care on non shared devices
+ */
ndelay(400);
spin_unlock_irqrestore(&ide_lock, flags);
}
@@ -1005,19 +938,6 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive)
return ide_stopped;
}
-static void check_dma_crc(ide_drive_t *drive)
-{
-#ifdef CONFIG_BLK_DEV_IDEDMA
- if (drive->crc_count) {
- ide_dma_off_quietly(drive);
- ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive));
- if (drive->current_speed >= XFER_SW_DMA_0)
- ide_dma_on(drive);
- } else
- ide_dma_off(drive);
-#endif
-}
-
static void ide_disk_pre_reset(ide_drive_t *drive)
{
int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1;
@@ -1039,17 +959,20 @@ static void pre_reset(ide_drive_t *drive)
else
drive->post_reset = 1;
+ if (drive->using_dma) {
+ if (drive->crc_count)
+ ide_check_dma_crc(drive);
+ else
+ ide_dma_off(drive);
+ }
+
if (!drive->keep_settings) {
- if (drive->using_dma) {
- check_dma_crc(drive);
- } else {
+ if (!drive->using_dma) {
drive->unmask = 0;
drive->io_32bit = 0;
}
return;
}
- if (drive->using_dma)
- check_dma_crc(drive);
if (HWIF(drive)->pre_reset != NULL)
HWIF(drive)->pre_reset(drive);
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index 4bda5cf2be37..b163b2e52212 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -49,7 +49,7 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id
printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index);
pnp_set_drvdata(dev,hwif);
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
return 0;
}
@@ -60,9 +60,10 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id
static void idepnp_remove(struct pnp_dev * dev)
{
ide_hwif_t *hwif = pnp_get_drvdata(dev);
- if (hwif) {
- ide_unregister(hwif->index);
- } else
+
+ if (hwif)
+ ide_unregister(hwif->index, 0, 0);
+ else
printk(KERN_ERR "idepnp: Unable to remove device, please report.\n");
}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 98a8af44bf64..9c07bdb68d1a 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -423,8 +423,9 @@ static int ide_busy_sleep(ide_hwif_t *hwif)
static int do_probe (ide_drive_t *drive, u8 cmd)
{
- int rc;
ide_hwif_t *hwif = HWIF(drive);
+ int rc;
+ u8 stat;
if (drive->present) {
/* avoid waiting for inappropriate probes */
@@ -461,15 +462,17 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
/* failed: try again */
rc = try_to_identify(drive,cmd);
}
- if (hwif->INB(IDE_STATUS_REG) == (BUSY_STAT|READY_STAT))
+
+ stat = hwif->INB(IDE_STATUS_REG);
+
+ if (stat == (BUSY_STAT | READY_STAT))
return 4;
if ((rc == 1 && cmd == WIN_PIDENTIFY) &&
((drive->autotune == IDE_TUNE_DEFAULT) ||
(drive->autotune == IDE_TUNE_AUTO))) {
- printk("%s: no response (status = 0x%02x), "
- "resetting drive\n", drive->name,
- hwif->INB(IDE_STATUS_REG));
+ printk(KERN_ERR "%s: no response (status = 0x%02x), "
+ "resetting drive\n", drive->name, stat);
msleep(50);
hwif->OUTB(drive->select.all, IDE_SELECT_REG);
msleep(50);
@@ -477,11 +480,13 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
(void)ide_busy_sleep(hwif);
rc = try_to_identify(drive, cmd);
}
+
+ /* ensure drive IRQ is clear */
+ stat = hwif->INB(IDE_STATUS_REG);
+
if (rc == 1)
- printk("%s: no response (status = 0x%02x)\n",
- drive->name, hwif->INB(IDE_STATUS_REG));
- /* ensure drive irq is clear */
- (void) hwif->INB(IDE_STATUS_REG);
+ printk(KERN_ERR "%s: no response (status = 0x%02x)\n",
+ drive->name, stat);
} else {
/* not present or maybe ATAPI */
rc = 3;
@@ -502,6 +507,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
static void enable_nest (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ u8 stat;
printk("%s: enabling %s -- ", hwif->name, drive->id->model);
SELECT_DRIVE(drive);
@@ -515,11 +521,12 @@ static void enable_nest (ide_drive_t *drive)
msleep(50);
- if (!OK_STAT((hwif->INB(IDE_STATUS_REG)), 0, BAD_STAT)) {
- printk("failed (status = 0x%02x)\n", hwif->INB(IDE_STATUS_REG));
- } else {
- printk("success\n");
- }
+ stat = hwif->INB(IDE_STATUS_REG);
+
+ if (!OK_STAT(stat, 0, BAD_STAT))
+ printk(KERN_CONT "failed (status = 0x%02x)\n", stat);
+ else
+ printk(KERN_CONT "success\n");
/* if !(success||timed-out) */
if (do_probe(drive, WIN_IDENTIFY) >= 2) {
@@ -822,7 +829,7 @@ static void ide_port_tune_devices(ide_hwif_t *hwif)
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
- if (hwif->no_io_32bit)
+ if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT)
drive->no_io_32bit = 1;
else
drive->no_io_32bit = drive->id->dword_io ? 1 : 0;
@@ -881,13 +888,6 @@ static int ide_init_queue(ide_drive_t *drive)
q->queuedata = drive;
blk_queue_segment_boundary(q, 0xffff);
- if (!hwif->rqsize) {
- if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
- (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA))
- hwif->rqsize = 256;
- else
- hwif->rqsize = 65536;
- }
if (hwif->rqsize < max_sectors)
max_sectors = hwif->rqsize;
blk_queue_max_sectors(q, max_sectors);
@@ -918,6 +918,48 @@ static int ide_init_queue(ide_drive_t *drive)
return 0;
}
+static void ide_add_drive_to_hwgroup(ide_drive_t *drive)
+{
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
+
+ spin_lock_irq(&ide_lock);
+ if (!hwgroup->drive) {
+ /* first drive for hwgroup. */
+ drive->next = drive;
+ hwgroup->drive = drive;
+ hwgroup->hwif = HWIF(hwgroup->drive);
+ } else {
+ drive->next = hwgroup->drive->next;
+ hwgroup->drive->next = drive;
+ }
+ spin_unlock_irq(&ide_lock);
+}
+
+/*
+ * For any present drive:
+ * - allocate the block device queue
+ * - link drive into the hwgroup
+ */
+static void ide_port_setup_devices(ide_hwif_t *hwif)
+{
+ int i;
+
+ for (i = 0; i < MAX_DRIVES; i++) {
+ ide_drive_t *drive = &hwif->drives[i];
+
+ if (!drive->present)
+ continue;
+
+ if (ide_init_queue(drive)) {
+ printk(KERN_ERR "ide: failed to init %s\n",
+ drive->name);
+ continue;
+ }
+
+ ide_add_drive_to_hwgroup(drive);
+ }
+}
+
/*
* This routine sets up the irq for an ide interface, and creates a new
* hwgroup for the irq/hwif if none was previously assigned.
@@ -1019,30 +1061,12 @@ static int init_irq (ide_hwif_t *hwif)
goto out_unlink;
}
- /*
- * For any present drive:
- * - allocate the block device queue
- * - link drive into the hwgroup
- */
- for (index = 0; index < MAX_DRIVES; ++index) {
- ide_drive_t *drive = &hwif->drives[index];
- if (!drive->present)
- continue;
- if (ide_init_queue(drive)) {
- printk(KERN_ERR "ide: failed to init %s\n",drive->name);
- continue;
- }
- spin_lock_irq(&ide_lock);
- if (!hwgroup->drive) {
- /* first drive for hwgroup. */
- drive->next = drive;
- hwgroup->drive = drive;
- hwgroup->hwif = HWIF(hwgroup->drive);
- } else {
- drive->next = hwgroup->drive->next;
- hwgroup->drive->next = drive;
- }
- spin_unlock_irq(&ide_lock);
+ if (!hwif->rqsize) {
+ if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
+ (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA))
+ hwif->rqsize = 256;
+ else
+ hwif->rqsize = 65536;
}
#if !defined(__mc68000__) && !defined(CONFIG_APUS)
@@ -1058,6 +1082,9 @@ static int init_irq (ide_hwif_t *hwif)
printk(" (%sed with %s)",
hwif->sharing_irq ? "shar" : "serializ", match->name);
printk("\n");
+
+ ide_port_setup_devices(hwif);
+
mutex_unlock(&ide_cfg_mtx);
return 0;
out_unlink:
@@ -1182,30 +1209,6 @@ static void drive_release_dev (struct device *dev)
complete(&drive->gendev_rel_comp);
}
-/*
- * init_gendisk() (as opposed to ide_geninit) is called for each major device,
- * after probing for drives, to allocate partition tables and other data
- * structures needed for the routines in genhd.c. ide_geninit() gets called
- * somewhat later, during the partition check.
- */
-static void init_gendisk (ide_hwif_t *hwif)
-{
- unsigned int unit;
-
- for (unit = 0; unit < MAX_DRIVES; ++unit) {
- ide_drive_t * drive = &hwif->drives[unit];
- ide_add_generic_settings(drive);
- snprintf(drive->gendev.bus_id,BUS_ID_SIZE,"%u.%u",
- hwif->index,unit);
- drive->gendev.parent = &hwif->gendev;
- drive->gendev.bus = &ide_bus_type;
- drive->gendev.driver_data = drive;
- drive->gendev.release = drive_release_dev;
- }
- blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS,
- THIS_MODULE, ata_probe, ata_lock, hwif);
-}
-
static int hwif_init(ide_hwif_t *hwif)
{
int old_irq;
@@ -1262,8 +1265,8 @@ static int hwif_init(ide_hwif_t *hwif)
hwif->name, hwif->irq);
done:
- init_gendisk(hwif);
- ide_acpi_init(hwif);
+ blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS,
+ THIS_MODULE, ata_probe, ata_lock, hwif);
return 1;
out:
@@ -1277,24 +1280,119 @@ static void hwif_register_devices(ide_hwif_t *hwif)
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];
+ struct device *dev = &drive->gendev;
+ int ret;
- if (drive->present) {
- int ret = device_register(&drive->gendev);
+ if (!drive->present)
+ continue;
- if (ret < 0)
- printk(KERN_WARNING "IDE: %s: "
- "device_register error: %d\n",
- __FUNCTION__, ret);
- }
+ ide_add_generic_settings(drive);
+
+ snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i);
+ dev->parent = &hwif->gendev;
+ dev->bus = &ide_bus_type;
+ dev->driver_data = drive;
+ dev->release = drive_release_dev;
+
+ ret = device_register(dev);
+ if (ret < 0)
+ printk(KERN_WARNING "IDE: %s: device_register error: "
+ "%d\n", __func__, ret);
+ }
+}
+
+static void ide_port_init_devices(ide_hwif_t *hwif)
+{
+ int i;
+
+ for (i = 0; i < MAX_DRIVES; i++) {
+ ide_drive_t *drive = &hwif->drives[i];
+
+ if (hwif->host_flags & IDE_HFLAG_IO_32BIT)
+ drive->io_32bit = 1;
+ if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS)
+ drive->unmask = 1;
+ if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS)
+ drive->no_unmask = 1;
+ if ((hwif->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0)
+ drive->autotune = 1;
+ }
+
+ if (hwif->port_init_devs)
+ hwif->port_init_devs(hwif);
+}
+
+static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
+ const struct ide_port_info *d)
+{
+ if (d->chipset != ide_etrax100)
+ hwif->channel = port;
+
+ if (d->chipset)
+ hwif->chipset = d->chipset;
+
+ if (d->init_iops)
+ d->init_iops(hwif);
+
+ if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
+ ide_hwif_setup_dma(hwif, d);
+
+ if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) ||
+ (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
+ hwif->irq = port ? 15 : 14;
+
+ hwif->host_flags = d->host_flags;
+ hwif->pio_mask = d->pio_mask;
+
+ if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate)
+ hwif->mate->serialized = hwif->serialized = 1;
+
+ hwif->swdma_mask = d->swdma_mask;
+ hwif->mwdma_mask = d->mwdma_mask;
+ hwif->ultra_mask = d->udma_mask;
+
+ /* reset DMA masks only for SFF-style DMA controllers */
+ if ((d->host_flags && IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0)
+ hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0;
+
+ if (d->host_flags & IDE_HFLAG_RQSIZE_256)
+ hwif->rqsize = 256;
+
+ /* call chipset specific routine for each enabled port */
+ if (d->init_hwif)
+ d->init_hwif(hwif);
+
+ if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) {
+ if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+ hwif->cbl = hwif->cable_detect(hwif);
}
}
-int ide_device_add_all(u8 *idx)
+int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
{
- ide_hwif_t *hwif;
+ ide_hwif_t *hwif, *mate = NULL;
int i, rc = 0;
for (i = 0; i < MAX_HWIFS; i++) {
+ if (d == NULL || idx[i] == 0xff) {
+ mate = NULL;
+ continue;
+ }
+
+ hwif = &ide_hwifs[idx[i]];
+
+ if (d->chipset != ide_etrax100 && (i & 1) && mate) {
+ hwif->mate = mate;
+ mate->mate = hwif;
+ }
+
+ mate = (i & 1) ? NULL : hwif;
+
+ ide_init_port(hwif, i & 1, d);
+ ide_port_init_devices(hwif);
+ }
+
+ for (i = 0; i < MAX_HWIFS; i++) {
if (idx[i] == 0xff)
continue;
@@ -1337,6 +1435,9 @@ int ide_device_add_all(u8 *idx)
rc = -1;
continue;
}
+
+ ide_acpi_init(hwif);
+ ide_acpi_port_init_devices(hwif);
}
for (i = 0; i < MAX_HWIFS; i++) {
@@ -1354,15 +1455,22 @@ int ide_device_add_all(u8 *idx)
}
for (i = 0; i < MAX_HWIFS; i++) {
- if (idx[i] != 0xff)
- ide_proc_register_port(&ide_hwifs[idx[i]]);
+ if (idx[i] == 0xff)
+ continue;
+
+ hwif = &ide_hwifs[idx[i]];
+
+ if (hwif->present) {
+ ide_proc_register_port(hwif);
+ ide_proc_port_register_devices(hwif);
+ }
}
return rc;
}
EXPORT_SYMBOL_GPL(ide_device_add_all);
-int ide_device_add(u8 idx[4])
+int ide_device_add(u8 idx[4], const struct ide_port_info *d)
{
u8 idx_all[MAX_HWIFS];
int i;
@@ -1370,6 +1478,6 @@ int ide_device_add(u8 idx[4])
for (i = 0; i < MAX_HWIFS; i++)
idx_all[i] = (i < 4) ? idx[i] : 0xff;
- return ide_device_add_all(idx_all);
+ return ide_device_add_all(idx_all, d);
}
EXPORT_SYMBOL_GPL(ide_device_add);
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 00c249cba236..975c0ff0f438 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -739,7 +739,7 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
EXPORT_SYMBOL(ide_proc_unregister_driver);
-static void create_proc_ide_drives(ide_hwif_t *hwif)
+void ide_proc_port_register_devices(ide_hwif_t *hwif)
{
int d;
struct proc_dir_entry *ent;
@@ -793,9 +793,6 @@ static ide_proc_entry_t hwif_entries[] = {
void ide_proc_register_port(ide_hwif_t *hwif)
{
- if (!hwif->present)
- return;
-
if (!hwif->proc) {
hwif->proc = proc_mkdir(hwif->name, proc_ide_root);
@@ -804,8 +801,6 @@ void ide_proc_register_port(ide_hwif_t *hwif)
ide_add_proc_entries(hwif->proc, hwif_entries, hwif);
}
-
- create_proc_ide_drives(hwif);
}
#ifdef CONFIG_BLK_DEV_IDEPCI
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 5aef63acf1e8..bf40d8c824ad 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1,424 +1,18 @@
/*
+ * IDE ATAPI streaming tape driver.
+ *
* Copyright (C) 1995-1999 Gadi Oxman <gadio@netvision.net.il>
* Copyright (C) 2003-2005 Bartlomiej Zolnierkiewicz
*
- * $Header$
- *
* This driver was constructed as a student project in the software laboratory
* of the faculty of electrical engineering in the Technion - Israel's
* Institute Of Technology, with the guide of Avner Lottem and Dr. Ilana David.
*
* It is hereby placed under the terms of the GNU general public license.
* (See linux/COPYING).
- */
-
-/*
- * IDE ATAPI streaming tape driver.
- *
- * This driver is a part of the Linux ide driver and works in co-operation
- * with linux/drivers/block/ide.c.
- *
- * The driver, in co-operation with ide.c, basically traverses the
- * request-list for the block device interface. The character device
- * interface, on the other hand, creates new requests, adds them
- * to the request-list of the block device, and waits for their completion.
- *
- * Pipelined operation mode is now supported on both reads and writes.
- *
- * The block device major and minor numbers are determined from the
- * tape's relative position in the ide interfaces, as explained in ide.c.
- *
- * The character device interface consists of the following devices:
- *
- * ht0 major 37, minor 0 first IDE tape, rewind on close.
- * ht1 major 37, minor 1 second IDE tape, rewind on close.
- * ...
- * nht0 major 37, minor 128 first IDE tape, no rewind on close.
- * nht1 major 37, minor 129 second IDE tape, no rewind on close.
- * ...
- *
- * Run linux/scripts/MAKEDEV.ide to create the above entries.
- *
- * The general magnetic tape commands compatible interface, as defined by
- * include/linux/mtio.h, is accessible through the character device.
- *
- * General ide driver configuration options, such as the interrupt-unmask
- * flag, can be configured by issuing an ioctl to the block device interface,
- * as any other ide device.
- *
- * Our own ide-tape ioctl's can be issued to either the block device or
- * the character device interface.
- *
- * Maximal throughput with minimal bus load will usually be achieved in the
- * following scenario:
- *
- * 1. ide-tape is operating in the pipelined operation mode.
- * 2. No buffering is performed by the user backup program.
- *
- * Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive.
- *
- * Ver 0.1 Nov 1 95 Pre-working code :-)
- * Ver 0.2 Nov 23 95 A short backup (few megabytes) and restore procedure
- * was successful ! (Using tar cvf ... on the block
- * device interface).
- * A longer backup resulted in major swapping, bad
- * overall Linux performance and eventually failed as
- * we received non serial read-ahead requests from the
- * buffer cache.
- * Ver 0.3 Nov 28 95 Long backups are now possible, thanks to the
- * character device interface. Linux's responsiveness
- * and performance doesn't seem to be much affected
- * from the background backup procedure.
- * Some general mtio.h magnetic tape operations are
- * now supported by our character device. As a result,
- * popular tape utilities are starting to work with
- * ide tapes :-)
- * The following configurations were tested:
- * 1. An IDE ATAPI TAPE shares the same interface
- * and irq with an IDE ATAPI CDROM.
- * 2. An IDE ATAPI TAPE shares the same interface
- * and irq with a normal IDE disk.
- * Both configurations seemed to work just fine !
- * However, to be on the safe side, it is meanwhile
- * recommended to give the IDE TAPE its own interface
- * and irq.
- * The one thing which needs to be done here is to
- * add a "request postpone" feature to ide.c,
- * so that we won't have to wait for the tape to finish
- * performing a long media access (DSC) request (such
- * as a rewind) before we can access the other device
- * on the same interface. This effect doesn't disturb
- * normal operation most of the time because read/write
- * requests are relatively fast, and once we are
- * performing one tape r/w request, a lot of requests
- * from the other device can be queued and ide.c will
- * service all of them after this single tape request.
- * Ver 1.0 Dec 11 95 Integrated into Linux 1.3.46 development tree.
- * On each read / write request, we now ask the drive
- * if we can transfer a constant number of bytes
- * (a parameter of the drive) only to its buffers,
- * without causing actual media access. If we can't,
- * we just wait until we can by polling the DSC bit.
- * This ensures that while we are not transferring
- * more bytes than the constant referred to above, the
- * interrupt latency will not become too high and
- * we won't cause an interrupt timeout, as happened
- * occasionally in the previous version.
- * While polling for DSC, the current request is
- * postponed and ide.c is free to handle requests from
- * the other device. This is handled transparently to
- * ide.c. The hwgroup locking method which was used
- * in the previous version was removed.
- * Use of new general features which are provided by
- * ide.c for use with atapi devices.
- * (Programming done by Mark Lord)
- * Few potential bug fixes (Again, suggested by Mark)
- * Single character device data transfers are now
- * not limited in size, as they were before.
- * We are asking the tape about its recommended
- * transfer unit and send a larger data transfer
- * as several transfers of the above size.
- * For best results, use an integral number of this
- * basic unit (which is shown during driver
- * initialization). I will soon add an ioctl to get
- * this important parameter.
- * Our data transfer buffer is allocated on startup,
- * rather than before each data transfer. This should
- * ensure that we will indeed have a data buffer.
- * Ver 1.1 Dec 14 95 Fixed random problems which occurred when the tape
- * shared an interface with another device.
- * (poll_for_dsc was a complete mess).
- * Removed some old (non-active) code which had
- * to do with supporting buffer cache originated
- * requests.
- * The block device interface can now be opened, so
- * that general ide driver features like the unmask
- * interrupts flag can be selected with an ioctl.
- * This is the only use of the block device interface.
- * New fast pipelined operation mode (currently only on
- * writes). When using the pipelined mode, the
- * throughput can potentially reach the maximum
- * tape supported throughput, regardless of the
- * user backup program. On my tape drive, it sometimes
- * boosted performance by a factor of 2. Pipelined
- * mode is enabled by default, but since it has a few
- * downfalls as well, you may want to disable it.
- * A short explanation of the pipelined operation mode
- * is available below.
- * Ver 1.2 Jan 1 96 Eliminated pipelined mode race condition.
- * Added pipeline read mode. As a result, restores
- * are now as fast as backups.
- * Optimized shared interface behavior. The new behavior
- * typically results in better IDE bus efficiency and
- * higher tape throughput.
- * Pre-calculation of the expected read/write request
- * service time, based on the tape's parameters. In
- * the pipelined operation mode, this allows us to
- * adjust our polling frequency to a much lower value,
- * and thus to dramatically reduce our load on Linux,
- * without any decrease in performance.
- * Implemented additional mtio.h operations.
- * The recommended user block size is returned by
- * the MTIOCGET ioctl.
- * Additional minor changes.
- * Ver 1.3 Feb 9 96 Fixed pipelined read mode bug which prevented the
- * use of some block sizes during a restore procedure.
- * The character device interface will now present a
- * continuous view of the media - any mix of block sizes
- * during a backup/restore procedure is supported. The
- * driver will buffer the requests internally and
- * convert them to the tape's recommended transfer
- * unit, making performance almost independent of the
- * chosen user block size.
- * Some improvements in error recovery.
- * By cooperating with ide-dma.c, bus mastering DMA can
- * now sometimes be used with IDE tape drives as well.
- * Bus mastering DMA has the potential to dramatically
- * reduce the CPU's overhead when accessing the device,
- * and can be enabled by using hdparm -d1 on the tape's
- * block device interface. For more info, read the
- * comments in ide-dma.c.
- * Ver 1.4 Mar 13 96 Fixed serialize support.
- * Ver 1.5 Apr 12 96 Fixed shared interface operation, broken in 1.3.85.
- * Fixed pipelined read mode inefficiency.
- * Fixed nasty null dereferencing bug.
- * Ver 1.6 Aug 16 96 Fixed FPU usage in the driver.
- * Fixed end of media bug.
- * Ver 1.7 Sep 10 96 Minor changes for the CONNER CTT8000-A model.
- * Ver 1.8 Sep 26 96 Attempt to find a better balance between good
- * interactive response and high system throughput.
- * Ver 1.9 Nov 5 96 Automatically cross encountered filemarks rather
- * than requiring an explicit FSF command.
- * Abort pending requests at end of media.
- * MTTELL was sometimes returning incorrect results.
- * Return the real block size in the MTIOCGET ioctl.
- * Some error recovery bug fixes.
- * Ver 1.10 Nov 5 96 Major reorganization.
- * Reduced CPU overhead a bit by eliminating internal
- * bounce buffers.
- * Added module support.
- * Added multiple tape drives support.
- * Added partition support.
- * Rewrote DSC handling.
- * Some portability fixes.
- * Removed ide-tape.h.
- * Additional minor changes.
- * Ver 1.11 Dec 2 96 Bug fix in previous DSC timeout handling.
- * Use ide_stall_queue() for DSC overlap.
- * Use the maximum speed rather than the current speed
- * to compute the request service time.
- * Ver 1.12 Dec 7 97 Fix random memory overwriting and/or last block data
- * corruption, which could occur if the total number
- * of bytes written to the tape was not an integral
- * number of tape blocks.
- * Add support for INTERRUPT DRQ devices.
- * Ver 1.13 Jan 2 98 Add "speed == 0" work-around for HP COLORADO 5GB
- * Ver 1.14 Dec 30 98 Partial fixes for the Sony/AIWA tape drives.
- * Replace cli()/sti() with hwgroup spinlocks.
- * Ver 1.15 Mar 25 99 Fix SMP race condition by replacing hwgroup
- * spinlock with private per-tape spinlock.
- * Ver 1.16 Sep 1 99 Add OnStream tape support.
- * Abort read pipeline on EOD.
- * Wait for the tape to become ready in case it returns
- * "in the process of becoming ready" on open().
- * Fix zero padding of the last written block in
- * case the tape block size is larger than PAGE_SIZE.
- * Decrease the default disconnection time to tn.
- * Ver 1.16e Oct 3 99 Minor fixes.
- * Ver 1.16e1 Oct 13 99 Patches by Arnold Niessen,
- * niessen@iae.nl / arnold.niessen@philips.com
- * GO-1) Undefined code in idetape_read_position
- * according to Gadi's email
- * AJN-1) Minor fix asc == 11 should be asc == 0x11
- * in idetape_issue_packet_command (did effect
- * debugging output only)
- * AJN-2) Added more debugging output, and
- * added ide-tape: where missing. I would also
- * like to add tape->name where possible
- * AJN-3) Added different debug_level's
- * via /proc/ide/hdc/settings
- * "debug_level" determines amount of debugging output;
- * can be changed using /proc/ide/hdx/settings
- * 0 : almost no debugging output
- * 1 : 0+output errors only
- * 2 : 1+output all sensekey/asc
- * 3 : 2+follow all chrdev related procedures
- * 4 : 3+follow all procedures
- * 5 : 4+include pc_stack rq_stack info
- * 6 : 5+USE_COUNT updates
- * AJN-4) Fixed timeout for retension in idetape_queue_pc_tail
- * from 5 to 10 minutes
- * AJN-5) Changed maximum number of blocks to skip when
- * reading tapes with multiple consecutive write
- * errors from 100 to 1000 in idetape_get_logical_blk
- * Proposed changes to code:
- * 1) output "logical_blk_num" via /proc
- * 2) output "current_operation" via /proc
- * 3) Either solve or document the fact that `mt rewind' is
- * required after reading from /dev/nhtx to be
- * able to rmmod the idetape module;
- * Also, sometimes an application finishes but the
- * device remains `busy' for some time. Same cause ?
- * Proposed changes to release-notes:
- * 4) write a simple `quickstart' section in the
- * release notes; I volunteer if you don't want to
- * 5) include a pointer to video4linux in the doc
- * to stimulate video applications
- * 6) release notes lines 331 and 362: explain what happens
- * if the application data rate is higher than 1100 KB/s;
- * similar approach to lower-than-500 kB/s ?
- * 7) 6.6 Comparison; wouldn't it be better to allow different
- * strategies for read and write ?
- * Wouldn't it be better to control the tape buffer
- * contents instead of the bandwidth ?
- * 8) line 536: replace will by would (if I understand
- * this section correctly, a hypothetical and unwanted situation
- * is being described)
- * Ver 1.16f Dec 15 99 Change place of the secondary OnStream header frames.
- * Ver 1.17 Nov 2000 / Jan 2001 Marcel Mol, marcel@mesa.nl
- * - Add idetape_onstream_mode_sense_tape_parameter_page
- * function to get tape capacity in frames: tape->capacity.
- * - Add support for DI-50 drives( or any DI- drive).
- * - 'workaround' for read error/blank block around block 3000.
- * - Implement Early warning for end of media for Onstream.
- * - Cosmetic code changes for readability.
- * - Idetape_position_tape should not use SKIP bit during
- * Onstream read recovery.
- * - Add capacity, logical_blk_num and first/last_frame_position
- * to /proc/ide/hd?/settings.
- * - Module use count was gone in the Linux 2.4 driver.
- * Ver 1.17a Apr 2001 Willem Riede osst@riede.org
- * - Get drive's actual block size from mode sense block descriptor
- * - Limit size of pipeline
- * Ver 1.17b Oct 2002 Alan Stern <stern@rowland.harvard.edu>
- * Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used
- * it in the code!
- * Actually removed aborted stages in idetape_abort_pipeline
- * instead of just changing the command code.
- * Made the transfer byte count for Request Sense equal to the
- * actual length of the data transfer.
- * Changed handling of partial data transfers: they do not
- * cause DMA errors.
- * Moved initiation of DMA transfers to the correct place.
- * Removed reference to unallocated memory.
- * Made __idetape_discard_read_pipeline return the number of
- * sectors skipped, not the number of stages.
- * Replaced errant kfree() calls with __idetape_kfree_stage().
- * Fixed off-by-one error in testing the pipeline length.
- * Fixed handling of filemarks in the read pipeline.
- * Small code optimization for MTBSF and MTBSFM ioctls.
- * Don't try to unlock the door during device close if is
- * already unlocked!
- * Cosmetic fixes to miscellaneous debugging output messages.
- * Set the minimum /proc/ide/hd?/settings values for "pipeline",
- * "pipeline_min", and "pipeline_max" to 1.
- *
- * Here are some words from the first releases of hd.c, which are quoted
- * in ide.c and apply here as well:
- *
- * | Special care is recommended. Have Fun!
*
- */
-
-/*
- * An overview of the pipelined operation mode.
- *
- * In the pipelined write mode, we will usually just add requests to our
- * pipeline and return immediately, before we even start to service them. The
- * user program will then have enough time to prepare the next request while
- * we are still busy servicing previous requests. In the pipelined read mode,
- * the situation is similar - we add read-ahead requests into the pipeline,
- * before the user even requested them.
- *
- * The pipeline can be viewed as a "safety net" which will be activated when
- * the system load is high and prevents the user backup program from keeping up
- * with the current tape speed. At this point, the pipeline will get
- * shorter and shorter but the tape will still be streaming at the same speed.
- * Assuming we have enough pipeline stages, the system load will hopefully
- * decrease before the pipeline is completely empty, and the backup program
- * will be able to "catch up" and refill the pipeline again.
- *
- * When using the pipelined mode, it would be best to disable any type of
- * buffering done by the user program, as ide-tape already provides all the
- * benefits in the kernel, where it can be done in a more efficient way.
- * As we will usually not block the user program on a request, the most
- * efficient user code will then be a simple read-write-read-... cycle.
- * Any additional logic will usually just slow down the backup process.
- *
- * Using the pipelined mode, I get a constant over 400 KBps throughput,
- * which seems to be the maximum throughput supported by my tape.
- *
- * However, there are some downfalls:
- *
- * 1. We use memory (for data buffers) in proportional to the number
- * of pipeline stages (each stage is about 26 KB with my tape).
- * 2. In the pipelined write mode, we cheat and postpone error codes
- * to the user task. In read mode, the actual tape position
- * will be a bit further than the last requested block.
- *
- * Concerning (1):
- *
- * 1. We allocate stages dynamically only when we need them. When
- * we don't need them, we don't consume additional memory. In
- * case we can't allocate stages, we just manage without them
- * (at the expense of decreased throughput) so when Linux is
- * tight in memory, we will not pose additional difficulties.
- *
- * 2. The maximum number of stages (which is, in fact, the maximum
- * amount of memory) which we allocate is limited by the compile
- * time parameter IDETAPE_MAX_PIPELINE_STAGES.
- *
- * 3. The maximum number of stages is a controlled parameter - We
- * don't start from the user defined maximum number of stages
- * but from the lower IDETAPE_MIN_PIPELINE_STAGES (again, we
- * will not even allocate this amount of stages if the user
- * program can't handle the speed). We then implement a feedback
- * loop which checks if the pipeline is empty, and if it is, we
- * increase the maximum number of stages as necessary until we
- * reach the optimum value which just manages to keep the tape
- * busy with minimum allocated memory or until we reach
- * IDETAPE_MAX_PIPELINE_STAGES.
- *
- * Concerning (2):
- *
- * In pipelined write mode, ide-tape can not return accurate error codes
- * to the user program since we usually just add the request to the
- * pipeline without waiting for it to be serviced. In case an error
- * occurs, I will report it on the next user request.
- *
- * In the pipelined read mode, subsequent read requests or forward
- * filemark spacing will perform correctly, as we preserve all blocks
- * and filemarks which we encountered during our excess read-ahead.
- *
- * For accurate tape positioning and error reporting, disabling
- * pipelined mode might be the best option.
- *
- * You can enable/disable/tune the pipelined operation mode by adjusting
- * the compile time parameters below.
- */
-
-/*
- * Possible improvements.
- *
- * 1. Support for the ATAPI overlap protocol.
- *
- * In order to maximize bus throughput, we currently use the DSC
- * overlap method which enables ide.c to service requests from the
- * other device while the tape is busy executing a command. The
- * DSC overlap method involves polling the tape's status register
- * for the DSC bit, and servicing the other device while the tape
- * isn't ready.
- *
- * In the current QIC development standard (December 1995),
- * it is recommended that new tape drives will *in addition*
- * implement the ATAPI overlap protocol, which is used for the
- * same purpose - efficient use of the IDE bus, but is interrupt
- * driven and thus has much less CPU overhead.
- *
- * ATAPI overlap is likely to be supported in most new ATAPI
- * devices, including new ATAPI cdroms, and thus provides us
- * a method by which we can achieve higher throughput when
- * sharing a (fast) ATA-2 disk with any (slow) new ATAPI device.
+ * For a historical changelog see
+ * Documentation/ide/ChangeLog.ide-tape.1995-2002
*/
#define IDETAPE_VERSION "1.19"
@@ -442,49 +36,13 @@
#include <linux/completion.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
+#include <scsi/scsi.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/unaligned.h>
-
-/*
- * partition
- */
-typedef struct os_partition_s {
- __u8 partition_num;
- __u8 par_desc_ver;
- __u16 wrt_pass_cntr;
- __u32 first_frame_addr;
- __u32 last_frame_addr;
- __u32 eod_frame_addr;
-} os_partition_t;
-
-/*
- * DAT entry
- */
-typedef struct os_dat_entry_s {
- __u32 blk_sz;
- __u16 blk_cnt;
- __u8 flags;
- __u8 reserved;
-} os_dat_entry_t;
-
-/*
- * DAT
- */
-#define OS_DAT_FLAGS_DATA (0xc)
-#define OS_DAT_FLAGS_MARK (0x1)
-
-typedef struct os_dat_s {
- __u8 dat_sz;
- __u8 reserved1;
- __u8 entry_cnt;
- __u8 reserved3;
- os_dat_entry_t dat_list[16];
-} os_dat_t;
-
#include <linux/mtio.h>
/**************************** Tunable parameters *****************************/
@@ -512,10 +70,7 @@ typedef struct os_dat_s {
/*
* The following are used to debug the driver:
*
- * Setting IDETAPE_DEBUG_INFO to 1 will report device capabilities.
* Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control.
- * Setting IDETAPE_DEBUG_BUGS to 1 will enable self-sanity checks in
- * some places.
*
* Setting them to 0 will restore normal operation mode:
*
@@ -527,9 +82,7 @@ typedef struct os_dat_s {
* is verified to be stable enough. This will make it much more
* esthetic.
*/
-#define IDETAPE_DEBUG_INFO 0
#define IDETAPE_DEBUG_LOG 0
-#define IDETAPE_DEBUG_BUGS 1
/*
* After each failed packet command we issue a request sense command
@@ -671,65 +224,6 @@ typedef struct idetape_packet_command_s {
#define PC_WRITING 5
/*
- * Capabilities and Mechanical Status Page
- */
-typedef struct {
- unsigned page_code :6; /* Page code - Should be 0x2a */
- __u8 reserved0_6 :1;
- __u8 ps :1; /* parameters saveable */
- __u8 page_length; /* Page Length - Should be 0x12 */
- __u8 reserved2, reserved3;
- unsigned ro :1; /* Read Only Mode */
- unsigned reserved4_1234 :4;
- unsigned sprev :1; /* Supports SPACE in the reverse direction */
- unsigned reserved4_67 :2;
- unsigned reserved5_012 :3;
- unsigned efmt :1; /* Supports ERASE command initiated formatting */
- unsigned reserved5_4 :1;
- unsigned qfa :1; /* Supports the QFA two partition formats */
- unsigned reserved5_67 :2;
- unsigned lock :1; /* Supports locking the volume */
- unsigned locked :1; /* The volume is locked */
- unsigned prevent :1; /* The device defaults in the prevent state after power up */
- unsigned eject :1; /* The device can eject the volume */
- __u8 disconnect :1; /* The device can break request > ctl */
- __u8 reserved6_5 :1;
- unsigned ecc :1; /* Supports error correction */
- unsigned cmprs :1; /* Supports data compression */
- unsigned reserved7_0 :1;
- unsigned blk512 :1; /* Supports 512 bytes block size */
- unsigned blk1024 :1; /* Supports 1024 bytes block size */
- unsigned reserved7_3_6 :4;
- unsigned blk32768 :1; /* slowb - the device restricts the byte count for PIO */
- /* transfers for slow buffer memory ??? */
- /* Also 32768 block size in some cases */
- __u16 max_speed; /* Maximum speed supported in KBps */
- __u8 reserved10, reserved11;
- __u16 ctl; /* Continuous Transfer Limit in blocks */
- __u16 speed; /* Current Speed, in KBps */
- __u16 buffer_size; /* Buffer Size, in 512 bytes */
- __u8 reserved18, reserved19;
-} idetape_capabilities_page_t;
-
-/*
- * Block Size Page
- */
-typedef struct {
- unsigned page_code :6; /* Page code - Should be 0x30 */
- unsigned reserved1_6 :1;
- unsigned ps :1;
- __u8 page_length; /* Page Length - Should be 2 */
- __u8 reserved2;
- unsigned play32 :1;
- unsigned play32_5 :1;
- unsigned reserved2_23 :2;
- unsigned record32 :1;
- unsigned record32_5 :1;
- unsigned reserved2_6 :1;
- unsigned one :1;
-} idetape_block_size_page_t;
-
-/*
* A pipeline stage.
*/
typedef struct idetape_stage_s {
@@ -739,32 +233,6 @@ typedef struct idetape_stage_s {
} idetape_stage_t;
/*
- * REQUEST SENSE packet command result - Data Format.
- */
-typedef struct {
- unsigned error_code :7; /* Current of deferred errors */
- unsigned valid :1; /* The information field conforms to QIC-157C */
- __u8 reserved1 :8; /* Segment Number - Reserved */
- unsigned sense_key :4; /* Sense Key */
- unsigned reserved2_4 :1; /* Reserved */
- unsigned ili :1; /* Incorrect Length Indicator */
- unsigned eom :1; /* End Of Medium */
- unsigned filemark :1; /* Filemark */
- __u32 information __attribute__ ((packed));
- __u8 asl; /* Additional sense length (n-7) */
- __u32 command_specific; /* Additional command specific information */
- __u8 asc; /* Additional Sense Code */
- __u8 ascq; /* Additional Sense Code Qualifier */
- __u8 replaceable_unit_code; /* Field Replaceable Unit Code */
- unsigned sk_specific1 :7; /* Sense Key Specific */
- unsigned sksv :1; /* Sense Key Specific information is valid */
- __u8 sk_specific2; /* Sense Key Specific */
- __u8 sk_specific3; /* Sense Key Specific */
- __u8 pad[2]; /* Padding to 20 bytes */
-} idetape_request_sense_result_t;
-
-
-/*
* Most of our global data which we need to save even as we leave the
* driver due to an interrupt or a timer event is stored in a variable
* of type idetape_tape_t, defined below.
@@ -854,8 +322,9 @@ typedef struct ide_tape_obj {
/* Usually 512 or 1024 bytes */
unsigned short tape_block_size;
int user_bs_factor;
+
/* Copy of the tape's Capabilities and Mechanical Page */
- idetape_capabilities_page_t capabilities;
+ u8 caps[20];
/*
* Active data transfer request parameters.
@@ -918,9 +387,6 @@ typedef struct ide_tape_obj {
int avg_size;
int avg_speed;
- /* last sense information */
- idetape_request_sense_result_t sense;
-
char vendor_id[10];
char product_id[18];
char firmware_revision[6];
@@ -1052,27 +518,6 @@ static void ide_tape_put(struct ide_tape_obj *tape)
#define IDETAPE_MEDIUM_PRESENT 9
/*
- * Supported ATAPI tape drives packet commands
- */
-#define IDETAPE_TEST_UNIT_READY_CMD 0x00
-#define IDETAPE_REWIND_CMD 0x01
-#define IDETAPE_REQUEST_SENSE_CMD 0x03
-#define IDETAPE_READ_CMD 0x08
-#define IDETAPE_WRITE_CMD 0x0a
-#define IDETAPE_WRITE_FILEMARK_CMD 0x10
-#define IDETAPE_SPACE_CMD 0x11
-#define IDETAPE_INQUIRY_CMD 0x12
-#define IDETAPE_ERASE_CMD 0x19
-#define IDETAPE_MODE_SENSE_CMD 0x1a
-#define IDETAPE_MODE_SELECT_CMD 0x15
-#define IDETAPE_LOAD_UNLOAD_CMD 0x1b
-#define IDETAPE_PREVENT_CMD 0x1e
-#define IDETAPE_LOCATE_CMD 0x2b
-#define IDETAPE_READ_POSITION_CMD 0x34
-#define IDETAPE_READ_BUFFER_CMD 0x3c
-#define IDETAPE_SET_SPEED_CMD 0xbb
-
-/*
* Some defines for the READ BUFFER command
*/
#define IDETAPE_RETRIEVE_FAULTY_BLOCK 6
@@ -1129,31 +574,6 @@ struct idetape_id_gcw {
};
/*
- * INQUIRY packet command - Data Format (From Table 6-8 of QIC-157C)
- */
-typedef struct {
- unsigned device_type :5; /* Peripheral Device Type */
- unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */
- unsigned reserved1_6t0 :7; /* Reserved */
- unsigned rmb :1; /* Removable Medium Bit */
- unsigned ansi_version :3; /* ANSI Version */
- unsigned ecma_version :3; /* ECMA Version */
- unsigned iso_version :2; /* ISO Version */
- unsigned response_format :4; /* Response Data Format */
- unsigned reserved3_45 :2; /* Reserved */
- unsigned reserved3_6 :1; /* TrmIOP - Reserved */
- unsigned reserved3_7 :1; /* AENC - Reserved */
- __u8 additional_length; /* Additional Length (total_length-4) */
- __u8 rsv5, rsv6, rsv7; /* Reserved */
- __u8 vendor_id[8]; /* Vendor Identification */
- __u8 product_id[16]; /* Product Identification */
- __u8 revision_level[4]; /* Revision Level */
- __u8 vendor_specific[20]; /* Vendor Specific - Optional */
- __u8 reserved56t95[40]; /* Reserved - Optional */
- /* Additional information may be returned */
-} idetape_inquiry_result_t;
-
-/*
* READ POSITION packet command - Data Format (From Table 6-57)
*/
typedef struct {
@@ -1171,100 +591,9 @@ typedef struct {
u32 bytes_in_buffer; /* Bytes In Buffer (Optional) */
} idetape_read_position_result_t;
-/*
- * Follows structures which are related to the SELECT SENSE / MODE SENSE
- * packet commands. Those packet commands are still not supported
- * by ide-tape.
- */
+/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
#define IDETAPE_BLOCK_DESCRIPTOR 0
#define IDETAPE_CAPABILITIES_PAGE 0x2a
-#define IDETAPE_PARAMTR_PAGE 0x2b /* Onstream DI-x0 only */
-#define IDETAPE_BLOCK_SIZE_PAGE 0x30
-#define IDETAPE_BUFFER_FILLING_PAGE 0x33
-
-/*
- * Mode Parameter Header for the MODE SENSE packet command
- */
-typedef struct {
- __u8 mode_data_length; /* Length of the following data transfer */
- __u8 medium_type; /* Medium Type */
- __u8 dsp; /* Device Specific Parameter */
- __u8 bdl; /* Block Descriptor Length */
-#if 0
- /* data transfer page */
- __u8 page_code :6;
- __u8 reserved0_6 :1;
- __u8 ps :1; /* parameters saveable */
- __u8 page_length; /* page Length == 0x02 */
- __u8 reserved2;
- __u8 read32k :1; /* 32k blk size (data only) */
- __u8 read32k5 :1; /* 32.5k blk size (data&AUX) */
- __u8 reserved3_23 :2;
- __u8 write32k :1; /* 32k blk size (data only) */
- __u8 write32k5 :1; /* 32.5k blk size (data&AUX) */
- __u8 reserved3_6 :1;
- __u8 streaming :1; /* streaming mode enable */
-#endif
-} idetape_mode_parameter_header_t;
-
-/*
- * Mode Parameter Block Descriptor the MODE SENSE packet command
- *
- * Support for block descriptors is optional.
- */
-typedef struct {
- __u8 density_code; /* Medium density code */
- __u8 blocks[3]; /* Number of blocks */
- __u8 reserved4; /* Reserved */
- __u8 length[3]; /* Block Length */
-} idetape_parameter_block_descriptor_t;
-
-/*
- * The Data Compression Page, as returned by the MODE SENSE packet command.
- */
-typedef struct {
- unsigned page_code :6; /* Page Code - Should be 0xf */
- unsigned reserved0 :1; /* Reserved */
- unsigned ps :1;
- __u8 page_length; /* Page Length - Should be 14 */
- unsigned reserved2 :6; /* Reserved */
- unsigned dcc :1; /* Data Compression Capable */
- unsigned dce :1; /* Data Compression Enable */
- unsigned reserved3 :5; /* Reserved */
- unsigned red :2; /* Report Exception on Decompression */
- unsigned dde :1; /* Data Decompression Enable */
- __u32 ca; /* Compression Algorithm */
- __u32 da; /* Decompression Algorithm */
- __u8 reserved[4]; /* Reserved */
-} idetape_data_compression_page_t;
-
-/*
- * The Medium Partition Page, as returned by the MODE SENSE packet command.
- */
-typedef struct {
- unsigned page_code :6; /* Page Code - Should be 0x11 */
- unsigned reserved1_6 :1; /* Reserved */
- unsigned ps :1;
- __u8 page_length; /* Page Length - Should be 6 */
- __u8 map; /* Maximum Additional Partitions - Should be 0 */
- __u8 apd; /* Additional Partitions Defined - Should be 0 */
- unsigned reserved4_012 :3; /* Reserved */
- unsigned psum :2; /* Should be 0 */
- unsigned idp :1; /* Should be 0 */
- unsigned sdp :1; /* Should be 0 */
- unsigned fdp :1; /* Fixed Data Partitions */
- __u8 mfr; /* Medium Format Recognition */
- __u8 reserved[2]; /* Reserved */
-} idetape_medium_partition_page_t;
-
-/*
- * Run time configurable parameters.
- */
-typedef struct {
- int dsc_rw_frequency;
- int dsc_media_access_frequency;
- int nr_stages;
-} idetape_config_t;
/*
* The variables below are used for the character device interface.
@@ -1309,14 +638,12 @@ static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigne
int count;
while (bcount) {
-#if IDETAPE_DEBUG_BUGS
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_input_buffers\n");
idetape_discard_data(drive, bcount);
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount);
HWIF(drive)->atapi_input_bytes(drive, bh->b_data + atomic_read(&bh->b_count), count);
bcount -= count;
@@ -1336,13 +663,11 @@ static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsign
int count;
while (bcount) {
-#if IDETAPE_DEBUG_BUGS
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_output_buffers\n");
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
count = min((unsigned int)pc->b_count, (unsigned int)bcount);
HWIF(drive)->atapi_output_bytes(drive, pc->b_data, count);
bcount -= count;
@@ -1367,13 +692,11 @@ static void idetape_update_buffers (idetape_pc_t *pc)
if (test_bit(PC_WRITING, &pc->flags))
return;
while (bcount) {
-#if IDETAPE_DEBUG_BUGS
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_update_buffers\n");
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
count = min((unsigned int)bh->b_size, (unsigned int)bcount);
atomic_set(&bh->b_count, count);
if (atomic_read(&bh->b_count) == bh->b_size)
@@ -1446,36 +769,34 @@ static void idetape_init_pc (idetape_pc_t *pc)
}
/*
- * idetape_analyze_error is called on each failed packet command retry
- * to analyze the request sense. We currently do not utilize this
- * information.
+ * called on each failed packet command retry to analyze the request sense. We
+ * currently do not utilize this information.
*/
-static void idetape_analyze_error (ide_drive_t *drive, idetape_request_sense_result_t *result)
+static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t *pc = tape->failed_pc;
- tape->sense = *result;
- tape->sense_key = result->sense_key;
- tape->asc = result->asc;
- tape->ascq = result->ascq;
+ tape->sense_key = sense[2] & 0xF;
+ tape->asc = sense[12];
+ tape->ascq = sense[13];
#if IDETAPE_DEBUG_LOG
/*
- * Without debugging, we only log an error if we decided to
- * give up retrying.
+ * Without debugging, we only log an error if we decided to give up
+ * retrying.
*/
if (tape->debug_level >= 1)
printk(KERN_INFO "ide-tape: pc = %x, sense key = %x, "
"asc = %x, ascq = %x\n",
- pc->c[0], result->sense_key,
- result->asc, result->ascq);
+ pc->c[0], tape->sense_key,
+ tape->asc, tape->ascq);
#endif /* IDETAPE_DEBUG_LOG */
- /*
- * Correct pc->actually_transferred by asking the tape.
- */
+ /* Correct pc->actually_transferred by asking the tape. */
if (test_bit(PC_DMA_ERROR, &pc->flags)) {
- pc->actually_transferred = pc->request_transfer - tape->tape_block_size * ntohl(get_unaligned(&result->information));
+ pc->actually_transferred = pc->request_transfer -
+ tape->tape_block_size *
+ be32_to_cpu(get_unaligned((u32 *)&sense[3]));
idetape_update_buffers(pc);
}
@@ -1484,29 +805,29 @@ static void idetape_analyze_error (ide_drive_t *drive, idetape_request_sense_res
* with sense key=5, asc=0x22, ascq=0, let it slide. Some drives
* (i.e. Seagate STT3401A Travan) don't support 0-length read/writes.
*/
- if ((pc->c[0] == IDETAPE_READ_CMD || pc->c[0] == IDETAPE_WRITE_CMD)
- && pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) { /* length==0 */
- if (result->sense_key == 5) {
+ if ((pc->c[0] == READ_6 || pc->c[0] == WRITE_6)
+ /* length == 0 */
+ && pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) {
+ if (tape->sense_key == 5) {
/* don't report an error, everything's ok */
pc->error = 0;
/* don't retry read/write */
set_bit(PC_ABORT, &pc->flags);
}
}
- if (pc->c[0] == IDETAPE_READ_CMD && result->filemark) {
+ if (pc->c[0] == READ_6 && (sense[2] & 0x80)) {
pc->error = IDETAPE_ERROR_FILEMARK;
set_bit(PC_ABORT, &pc->flags);
}
- if (pc->c[0] == IDETAPE_WRITE_CMD) {
- if (result->eom ||
- (result->sense_key == 0xd && result->asc == 0x0 &&
- result->ascq == 0x2)) {
+ if (pc->c[0] == WRITE_6) {
+ if ((sense[2] & 0x40) || (tape->sense_key == 0xd
+ && tape->asc == 0x0 && tape->ascq == 0x2)) {
pc->error = IDETAPE_ERROR_EOD;
set_bit(PC_ABORT, &pc->flags);
}
}
- if (pc->c[0] == IDETAPE_READ_CMD || pc->c[0] == IDETAPE_WRITE_CMD) {
- if (result->sense_key == 8) {
+ if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
+ if (tape->sense_key == 8) {
pc->error = IDETAPE_ERROR_EOD;
set_bit(PC_ABORT, &pc->flags);
}
@@ -1516,10 +837,7 @@ static void idetape_analyze_error (ide_drive_t *drive, idetape_request_sense_res
}
}
-/*
- * idetape_active_next_stage will declare the next stage as "active".
- */
-static void idetape_active_next_stage (ide_drive_t *drive)
+static void idetape_activate_next_stage(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_stage_t *stage = tape->next_stage;
@@ -1529,12 +847,10 @@ static void idetape_active_next_stage (ide_drive_t *drive)
if (tape->debug_level >= 4)
printk(KERN_INFO "ide-tape: Reached idetape_active_next_stage\n");
#endif /* IDETAPE_DEBUG_LOG */
-#if IDETAPE_DEBUG_BUGS
if (stage == NULL) {
printk(KERN_ERR "ide-tape: bug: Trying to activate a non existing stage\n");
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
rq->rq_disk = tape->disk;
rq->buffer = NULL;
@@ -1609,28 +925,24 @@ static void idetape_remove_stage_head (ide_drive_t *drive)
if (tape->debug_level >= 4)
printk(KERN_INFO "ide-tape: Reached idetape_remove_stage_head\n");
#endif /* IDETAPE_DEBUG_LOG */
-#if IDETAPE_DEBUG_BUGS
if (tape->first_stage == NULL) {
printk(KERN_ERR "ide-tape: bug: tape->first_stage is NULL\n");
- return;
+ return;
}
if (tape->active_stage == tape->first_stage) {
printk(KERN_ERR "ide-tape: bug: Trying to free our active pipeline stage\n");
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
stage = tape->first_stage;
tape->first_stage = stage->next;
idetape_kfree_stage(tape, stage);
tape->nr_stages--;
if (tape->first_stage == NULL) {
tape->last_stage = NULL;
-#if IDETAPE_DEBUG_BUGS
if (tape->next_stage != NULL)
printk(KERN_ERR "ide-tape: bug: tape->next_stage != NULL\n");
if (tape->nr_stages)
printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 now\n");
-#endif /* IDETAPE_DEBUG_BUGS */
}
}
@@ -1716,7 +1028,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
}
}
if (tape->next_stage != NULL) {
- idetape_active_next_stage(drive);
+ idetape_activate_next_stage(drive);
/*
* Insert the next request into the request queue.
@@ -1748,7 +1060,7 @@ static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive)
printk(KERN_INFO "ide-tape: Reached idetape_request_sense_callback\n");
#endif /* IDETAPE_DEBUG_LOG */
if (!tape->pc->error) {
- idetape_analyze_error(drive, (idetape_request_sense_result_t *) tape->pc->buffer);
+ idetape_analyze_error(drive, tape->pc->buffer);
idetape_end_request(drive, 1, 0);
} else {
printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - Aborting request!\n");
@@ -1760,7 +1072,7 @@ static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive)
static void idetape_create_request_sense_cmd (idetape_pc_t *pc)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_REQUEST_SENSE_CMD;
+ pc->c[0] = REQUEST_SENSE;
pc->c[4] = 20;
pc->request_transfer = 20;
pc->callback = &idetape_request_sense_callback;
@@ -1913,15 +1225,14 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
local_irq_enable();
#if SIMULATE_ERRORS
- if ((pc->c[0] == IDETAPE_WRITE_CMD ||
- pc->c[0] == IDETAPE_READ_CMD) &&
+ if ((pc->c[0] == WRITE_6 || pc->c[0] == READ_6) &&
(++error_sim_count % 100) == 0) {
printk(KERN_INFO "ide-tape: %s: simulating error\n",
tape->name);
stat |= ERR_STAT;
}
#endif
- if ((stat & ERR_STAT) && pc->c[0] == IDETAPE_REQUEST_SENSE_CMD)
+ if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
stat &= ~ERR_STAT;
if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
/* Error detected */
@@ -1930,7 +1241,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
printk(KERN_INFO "ide-tape: %s: I/O error\n",
tape->name);
#endif /* IDETAPE_DEBUG_LOG */
- if (pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) {
+ if (pc->c[0] == REQUEST_SENSE) {
printk(KERN_ERR "ide-tape: I/O error in request sense command\n");
return ide_do_reset(drive);
}
@@ -2118,15 +1429,13 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape
int dma_ok = 0;
u16 bcount;
-#if IDETAPE_DEBUG_BUGS
- if (tape->pc->c[0] == IDETAPE_REQUEST_SENSE_CMD &&
- pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) {
+ if (tape->pc->c[0] == REQUEST_SENSE &&
+ pc->c[0] == REQUEST_SENSE) {
printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
"Two request sense in serial were issued\n");
}
-#endif /* IDETAPE_DEBUG_BUGS */
- if (tape->failed_pc == NULL && pc->c[0] != IDETAPE_REQUEST_SENSE_CMD)
+ if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
tape->failed_pc = pc;
/* Set the current packet command */
tape->pc = pc;
@@ -2139,7 +1448,7 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape
* filemark, or end of the media, for example).
*/
if (!test_bit(PC_ABORT, &pc->flags)) {
- if (!(pc->c[0] == IDETAPE_TEST_UNIT_READY_CMD &&
+ if (!(pc->c[0] == TEST_UNIT_READY &&
tape->sense_key == 2 && tape->asc == 4 &&
(tape->ascq == 1 || tape->ascq == 8))) {
printk(KERN_ERR "ide-tape: %s: I/O error, "
@@ -2181,8 +1490,8 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape
if (dma_ok) /* Will begin DMA later */
set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
if (test_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags)) {
- ide_set_handler(drive, &idetape_transfer_pc, IDETAPE_WAIT_CMD, NULL);
- hwif->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG);
+ ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc,
+ IDETAPE_WAIT_CMD, NULL);
return ide_started;
} else {
hwif->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG);
@@ -2212,7 +1521,7 @@ static ide_startstop_t idetape_pc_callback (ide_drive_t *drive)
static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_MODE_SENSE_CMD;
+ pc->c[0] = MODE_SENSE;
if (page_code != IDETAPE_BLOCK_DESCRIPTOR)
pc->c[1] = 8; /* DBD = 1 - Don't return block descriptors */
pc->c[2] = page_code;
@@ -2293,7 +1602,7 @@ static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive)
if (stat & SEEK_STAT) {
if (stat & ERR_STAT) {
/* Error detected */
- if (pc->c[0] != IDETAPE_TEST_UNIT_READY_CMD)
+ if (pc->c[0] != TEST_UNIT_READY)
printk(KERN_ERR "ide-tape: %s: I/O error, ",
tape->name);
/* Retry operation */
@@ -2350,8 +1659,8 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive)
static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_READ_CMD;
- put_unaligned(htonl(length), (unsigned int *) &pc->c[1]);
+ pc->c[0] = READ_6;
+ put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
pc->callback = &idetape_rw_callback;
pc->bh = bh;
@@ -2368,7 +1677,7 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *p
struct idetape_bh *p = bh;
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_READ_BUFFER_CMD;
+ pc->c[0] = READ_BUFFER;
pc->c[1] = IDETAPE_RETRIEVE_FAULTY_BLOCK;
pc->c[7] = size >> 8;
pc->c[8] = size & 0xff;
@@ -2386,8 +1695,8 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *p
static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_WRITE_CMD;
- put_unaligned(htonl(length), (unsigned int *) &pc->c[1]);
+ pc->c[0] = WRITE_6;
+ put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
pc->callback = &idetape_rw_callback;
set_bit(PC_WRITING, &pc->flags);
@@ -2412,12 +1721,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
u8 stat;
#if IDETAPE_DEBUG_LOG
-#if 0
- if (tape->debug_level >= 5)
- printk(KERN_INFO "ide-tape: %d, "
- "dev: %s, cmd: %ld, errors: %d\n",
- rq->rq_disk->disk_name, rq->cmd[0], rq->errors);
-#endif
if (tape->debug_level >= 2)
printk(KERN_INFO "ide-tape: sector: %ld, "
"nr_sectors: %ld, current_nr_sectors: %d\n",
@@ -2438,10 +1741,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
* Retry a failed packet command
*/
if (tape->failed_pc != NULL &&
- tape->pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) {
+ tape->pc->c[0] == REQUEST_SENSE) {
return idetape_issue_packet_command(drive, tape->failed_pc);
}
-#if IDETAPE_DEBUG_BUGS
if (postponed_rq != NULL)
if (rq != postponed_rq) {
printk(KERN_ERR "ide-tape: ide-tape.c bug - "
@@ -2449,7 +1751,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
idetape_end_request(drive, 0, 0);
return ide_stopped;
}
-#endif /* IDETAPE_DEBUG_BUGS */
tape->postponed_rq = NULL;
@@ -2636,13 +1937,11 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *
int ret = 0;
while (n) {
-#if IDETAPE_DEBUG_BUGS
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_copy_stage_from_user\n");
return 1;
}
-#endif /* IDETAPE_DEBUG_BUGS */
count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), (unsigned int)n);
if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, count))
ret = 1;
@@ -2666,13 +1965,11 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i
int ret = 0;
while (n) {
-#if IDETAPE_DEBUG_BUGS
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_copy_stage_to_user\n");
return 1;
}
-#endif /* IDETAPE_DEBUG_BUGS */
count = min(tape->b_count, n);
if (copy_to_user(buf, tape->b_data, count))
ret = 1;
@@ -2752,12 +2049,10 @@ static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq)
DECLARE_COMPLETION_ONSTACK(wait);
idetape_tape_t *tape = drive->driver_data;
-#if IDETAPE_DEBUG_BUGS
if (rq == NULL || !blk_special_request(rq)) {
printk (KERN_ERR "ide-tape: bug: Trying to sleep on non-valid request\n");
return;
}
-#endif /* IDETAPE_DEBUG_BUGS */
rq->end_io_data = &wait;
rq->end_io = blk_end_sync_rq;
spin_unlock_irq(&tape->spinlock);
@@ -2817,7 +2112,7 @@ static ide_startstop_t idetape_read_position_callback (ide_drive_t *drive)
static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t *pc,int write_filemark)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_WRITE_FILEMARK_CMD;
+ pc->c[0] = WRITE_FILEMARKS;
pc->c[4] = write_filemark;
set_bit(PC_WAIT_FOR_DSC, &pc->flags);
pc->callback = &idetape_pc_callback;
@@ -2826,7 +2121,7 @@ static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t
static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_TEST_UNIT_READY_CMD;
+ pc->c[0] = TEST_UNIT_READY;
pc->callback = &idetape_pc_callback;
}
@@ -2864,7 +2159,7 @@ static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc)
static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc,int cmd)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_LOAD_UNLOAD_CMD;
+ pc->c[0] = START_STOP;
pc->c[4] = cmd;
set_bit(PC_WAIT_FOR_DSC, &pc->flags);
pc->callback = &idetape_pc_callback;
@@ -2921,7 +2216,7 @@ static int idetape_flush_tape_buffers (ide_drive_t *drive)
static void idetape_create_read_position_cmd (idetape_pc_t *pc)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_READ_POSITION_CMD;
+ pc->c[0] = READ_POSITION;
pc->request_transfer = 20;
pc->callback = &idetape_read_position_callback;
}
@@ -2947,9 +2242,9 @@ static int idetape_read_position (ide_drive_t *drive)
static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, unsigned int block, u8 partition, int skip)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_LOCATE_CMD;
+ pc->c[0] = POSITION_TO_ELEMENT;
pc->c[1] = 2;
- put_unaligned(htonl(block), (unsigned int *) &pc->c[3]);
+ put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
pc->c[8] = partition;
set_bit(PC_WAIT_FOR_DSC, &pc->flags);
pc->callback = &idetape_pc_callback;
@@ -2959,11 +2254,12 @@ static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int
{
idetape_tape_t *tape = drive->driver_data;
- if (!tape->capabilities.lock)
+ /* device supports locking according to capabilities page */
+ if (!(tape->caps[6] & 0x01))
return 0;
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_PREVENT_CMD;
+ pc->c[0] = ALLOW_MEDIUM_REMOVAL;
pc->c[4] = prevent;
pc->callback = &idetape_pc_callback;
return 1;
@@ -3072,12 +2368,10 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct
if (tape->debug_level >= 2)
printk(KERN_INFO "ide-tape: idetape_queue_rw_tail: cmd=%d\n",cmd);
#endif /* IDETAPE_DEBUG_LOG */
-#if IDETAPE_DEBUG_BUGS
if (idetape_pipeline_active(tape)) {
printk(KERN_ERR "ide-tape: bug: the pipeline is active in idetape_queue_rw_tail\n");
return (0);
}
-#endif /* IDETAPE_DEBUG_BUGS */
idetape_init_rq(&rq, cmd);
rq.rq_disk = tape->disk;
@@ -3108,7 +2402,7 @@ static void idetape_insert_pipeline_into_queue (ide_drive_t *drive)
return;
if (!idetape_pipeline_active(tape)) {
set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
- idetape_active_next_stage(drive);
+ idetape_activate_next_stage(drive);
(void) ide_do_drive_cmd(drive, tape->active_data_request, ide_end);
}
}
@@ -3116,7 +2410,7 @@ static void idetape_insert_pipeline_into_queue (ide_drive_t *drive)
static void idetape_create_inquiry_cmd (idetape_pc_t *pc)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_INQUIRY_CMD;
+ pc->c[0] = INQUIRY;
pc->c[4] = pc->request_transfer = 254;
pc->callback = &idetape_pc_callback;
}
@@ -3124,28 +2418,15 @@ static void idetape_create_inquiry_cmd (idetape_pc_t *pc)
static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_REWIND_CMD;
+ pc->c[0] = REZERO_UNIT;
set_bit(PC_WAIT_FOR_DSC, &pc->flags);
pc->callback = &idetape_pc_callback;
}
-#if 0
-static void idetape_create_mode_select_cmd (idetape_pc_t *pc, int length)
-{
- idetape_init_pc(pc);
- set_bit(PC_WRITING, &pc->flags);
- pc->c[0] = IDETAPE_MODE_SELECT_CMD;
- pc->c[1] = 0x10;
- put_unaligned(htons(length), (unsigned short *) &pc->c[3]);
- pc->request_transfer = 255;
- pc->callback = &idetape_pc_callback;
-}
-#endif
-
static void idetape_create_erase_cmd (idetape_pc_t *pc)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_ERASE_CMD;
+ pc->c[0] = ERASE;
pc->c[1] = 1;
set_bit(PC_WAIT_FOR_DSC, &pc->flags);
pc->callback = &idetape_pc_callback;
@@ -3154,8 +2435,8 @@ static void idetape_create_erase_cmd (idetape_pc_t *pc)
static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd)
{
idetape_init_pc(pc);
- pc->c[0] = IDETAPE_SPACE_CMD;
- put_unaligned(htonl(count), (unsigned int *) &pc->c[1]);
+ pc->c[0] = SPACE;
+ put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
pc->c[1] = cmd;
set_bit(PC_WAIT_FOR_DSC, &pc->flags);
pc->callback = &idetape_pc_callback;
@@ -3275,8 +2556,7 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
idetape_tape_t *tape = drive->driver_data;
int blocks, min;
struct idetape_bh *bh;
-
-#if IDETAPE_DEBUG_BUGS
+
if (tape->chrdev_direction != idetape_direction_write) {
printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n");
return;
@@ -3285,7 +2565,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n");
tape->merge_stage_size = tape->stage_size;
}
-#endif /* IDETAPE_DEBUG_BUGS */
if (tape->merge_stage_size) {
blocks = tape->merge_stage_size / tape->tape_block_size;
if (tape->merge_stage_size % tape->tape_block_size) {
@@ -3330,7 +2609,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
* can be totally different on the next backup).
*/
tape->max_stages = tape->min_pipeline;
-#if IDETAPE_DEBUG_BUGS
if (tape->first_stage != NULL ||
tape->next_stage != NULL ||
tape->last_stage != NULL ||
@@ -3341,7 +2619,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
tape->first_stage, tape->next_stage,
tape->last_stage, tape->nr_stages);
}
-#endif /* IDETAPE_DEBUG_BUGS */
}
static void idetape_restart_speed_control (ide_drive_t *drive)
@@ -3364,7 +2641,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages)
idetape_stage_t *new_stage;
struct request rq;
int bytes_read;
- int blocks = tape->capabilities.ctl;
+ u16 blocks = *(u16 *)&tape->caps[12];
/* Initialize read operation */
if (tape->chrdev_direction != idetape_direction_read) {
@@ -3372,12 +2649,10 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages)
idetape_empty_write_pipeline(drive);
idetape_flush_tape_buffers(drive);
}
-#if IDETAPE_DEBUG_BUGS
if (tape->merge_stage || tape->merge_stage_size) {
printk (KERN_ERR "ide-tape: merge_stage_size should be 0 now\n");
tape->merge_stage_size = 0;
}
-#endif /* IDETAPE_DEBUG_BUGS */
if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
return -ENOMEM;
tape->chrdev_direction = idetape_direction_read;
@@ -3478,12 +2753,10 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
tape->pipeline_head++;
calculate_speeds(drive);
}
-#if IDETAPE_DEBUG_BUGS
if (bytes_read > blocks * tape->tape_block_size) {
printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n");
bytes_read = blocks * tape->tape_block_size;
}
-#endif /* IDETAPE_DEBUG_BUGS */
return (bytes_read);
}
@@ -3567,16 +2840,21 @@ static int idetape_rewind_tape (ide_drive_t *drive)
static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_config_t config;
void __user *argp = (void __user *)arg;
+ struct idetape_config {
+ int dsc_rw_frequency;
+ int dsc_media_access_frequency;
+ int nr_stages;
+ } config;
+
#if IDETAPE_DEBUG_LOG
if (tape->debug_level >= 4)
printk(KERN_INFO "ide-tape: Reached idetape_blkdev_ioctl\n");
#endif /* IDETAPE_DEBUG_LOG */
switch (cmd) {
case 0x0340:
- if (copy_from_user(&config, argp, sizeof (idetape_config_t)))
+ if (copy_from_user(&config, argp, sizeof(config)))
return -EFAULT;
tape->best_dsc_rw_frequency = config.dsc_rw_frequency;
tape->max_stages = config.nr_stages;
@@ -3584,7 +2862,7 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l
case 0x0350:
config.dsc_rw_frequency = (int) tape->best_dsc_rw_frequency;
config.nr_stages = tape->max_stages;
- if (copy_to_user(argp, &config, sizeof (idetape_config_t)))
+ if (copy_to_user(argp, &config, sizeof(config)))
return -EFAULT;
break;
default:
@@ -3608,11 +2886,12 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
idetape_pc_t pc;
unsigned long flags;
int retval,count=0;
+ int sprev = !!(tape->caps[4] & 0x20);
if (mt_count == 0)
return 0;
if (MTBSF == mt_op || MTBSFM == mt_op) {
- if (!tape->capabilities.sprev)
+ if (!sprev)
return -EIO;
mt_count = - mt_count;
}
@@ -3666,7 +2945,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
return (idetape_queue_pc_tail(drive, &pc));
case MTFSFM:
case MTBSFM:
- if (!tape->capabilities.sprev)
+ if (!sprev)
return (-EIO);
retval = idetape_space_over_filemarks(drive, MTFSF, mt_count-count);
if (retval) return (retval);
@@ -3703,6 +2982,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
ide_drive_t *drive = tape->drive;
ssize_t bytes_read,temp, actually_read = 0, rc;
ssize_t ret = 0;
+ u16 ctl = *(u16 *)&tape->caps[12];
#if IDETAPE_DEBUG_LOG
if (tape->debug_level >= 3)
@@ -3728,7 +3008,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
count -= actually_read;
}
while (count >= tape->stage_size) {
- bytes_read = idetape_add_chrdev_read_request(drive, tape->capabilities.ctl);
+ bytes_read = idetape_add_chrdev_read_request(drive, ctl);
if (bytes_read <= 0)
goto finish;
if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, bytes_read))
@@ -3738,7 +3018,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
actually_read += bytes_read;
}
if (count) {
- bytes_read = idetape_add_chrdev_read_request(drive, tape->capabilities.ctl);
+ bytes_read = idetape_add_chrdev_read_request(drive, ctl);
if (bytes_read <= 0)
goto finish;
temp = min((unsigned long)count, (unsigned long)bytes_read);
@@ -3767,6 +3047,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
ide_drive_t *drive = tape->drive;
ssize_t actually_written = 0;
ssize_t ret = 0;
+ u16 ctl = *(u16 *)&tape->caps[12];
/* The drive is write protected. */
if (tape->write_prot)
@@ -3782,13 +3063,11 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
if (tape->chrdev_direction != idetape_direction_write) {
if (tape->chrdev_direction == idetape_direction_read)
idetape_discard_read_pipeline(drive, 1);
-#if IDETAPE_DEBUG_BUGS
if (tape->merge_stage || tape->merge_stage_size) {
printk(KERN_ERR "ide-tape: merge_stage_size "
"should be 0 now\n");
tape->merge_stage_size = 0;
}
-#endif /* IDETAPE_DEBUG_BUGS */
if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
return -ENOMEM;
tape->chrdev_direction = idetape_direction_write;
@@ -3816,12 +3095,10 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
if (tape->restart_speed_control_req)
idetape_restart_speed_control(drive);
if (tape->merge_stage_size) {
-#if IDETAPE_DEBUG_BUGS
if (tape->merge_stage_size >= tape->stage_size) {
printk(KERN_ERR "ide-tape: bug: merge buffer too big\n");
tape->merge_stage_size = 0;
}
-#endif /* IDETAPE_DEBUG_BUGS */
actually_written = min((unsigned int)(tape->stage_size - tape->merge_stage_size), (unsigned int)count);
if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, actually_written))
ret = -EFAULT;
@@ -3832,7 +3109,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
if (tape->merge_stage_size == tape->stage_size) {
ssize_t retval;
tape->merge_stage_size = 0;
- retval = idetape_add_chrdev_write_request(drive, tape->capabilities.ctl);
+ retval = idetape_add_chrdev_write_request(drive, ctl);
if (retval <= 0)
return (retval);
}
@@ -3843,7 +3120,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
ret = -EFAULT;
buf += tape->stage_size;
count -= tape->stage_size;
- retval = idetape_add_chrdev_write_request(drive, tape->capabilities.ctl);
+ retval = idetape_add_chrdev_write_request(drive, ctl);
actually_written += tape->stage_size;
if (retval <= 0)
return (retval);
@@ -3871,69 +3148,20 @@ static int idetape_write_filemark (ide_drive_t *drive)
}
/*
- * idetape_mtioctop is called from idetape_chrdev_ioctl when
- * the general mtio MTIOCTOP ioctl is requested.
- *
- * We currently support the following mtio.h operations:
+ * Called from idetape_chrdev_ioctl when the general mtio MTIOCTOP ioctl is
+ * requested.
*
- * MTFSF - Space over mt_count filemarks in the positive direction.
- * The tape is positioned after the last spaced filemark.
+ * Note: MTBSF and MTBSFM are not supported when the tape doesn't support
+ * spacing over filemarks in the reverse direction. In this case, MTFSFM is also
+ * usually not supported (it is supported in the rare case in which we crossed
+ * the filemark during our read-ahead pipelined operation mode).
*
- * MTFSFM - Same as MTFSF, but the tape is positioned before the
- * last filemark.
+ * The following commands are currently not supported:
*
- * MTBSF - Steps background over mt_count filemarks, tape is
- * positioned before the last filemark.
- *
- * MTBSFM - Like MTBSF, only tape is positioned after the last filemark.
- *
- * Note:
- *
- * MTBSF and MTBSFM are not supported when the tape doesn't
- * support spacing over filemarks in the reverse direction.
- * In this case, MTFSFM is also usually not supported (it is
- * supported in the rare case in which we crossed the filemark
- * during our read-ahead pipelined operation mode).
- *
- * MTWEOF - Writes mt_count filemarks. Tape is positioned after
- * the last written filemark.
- *
- * MTREW - Rewinds tape.
- *
- * MTLOAD - Loads the tape.
- *
- * MTOFFL - Puts the tape drive "Offline": Rewinds the tape and
- * MTUNLOAD prevents further access until the media is replaced.
- *
- * MTNOP - Flushes tape buffers.
- *
- * MTRETEN - Retension media. This typically consists of one end
- * to end pass on the media.
- *
- * MTEOM - Moves to the end of recorded data.
- *
- * MTERASE - Erases tape.
- *
- * MTSETBLK - Sets the user block size to mt_count bytes. If
- * mt_count is 0, we will attempt to autodetect
- * the block size.
- *
- * MTSEEK - Positions the tape in a specific block number, where
- * each block is assumed to contain which user_block_size
- * bytes.
- *
- * MTSETPART - Switches to another tape partition.
- *
- * MTLOCK - Locks the tape door.
- *
- * MTUNLOCK - Unlocks the tape door.
- *
- * The following commands are currently not supported:
- *
- * MTFSS, MTBSS, MTWSM, MTSETDENSITY,
- * MTSETDRVBUFFER, MT_ST_BOOLEANS, MT_ST_WRITE_THRESHOLD.
+ * MTFSS, MTBSS, MTWSM, MTSETDENSITY, MTSETDRVBUFFER, MT_ST_BOOLEANS,
+ * MT_ST_WRITE_THRESHOLD.
*/
-static int idetape_mtioctop (ide_drive_t *drive,short mt_op,int mt_count)
+static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
@@ -4048,29 +3276,12 @@ static int idetape_mtioctop (ide_drive_t *drive,short mt_op,int mt_count)
}
/*
- * Our character device ioctls.
- *
- * General mtio.h magnetic io commands are supported here, and not in
- * the corresponding block interface.
- *
- * The following ioctls are supported:
- *
- * MTIOCTOP - Refer to idetape_mtioctop for detailed description.
- *
- * MTIOCGET - The mt_dsreg field in the returned mtget structure
- * will be set to (user block size in bytes <<
- * MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK.
- *
- * The mt_blkno is set to the current user block number.
- * The other mtget fields are not supported.
- *
- * MTIOCPOS - The current tape "block position" is returned. We
- * assume that each block contains user_block_size
- * bytes.
- *
- * Our own ide-tape ioctls are supported on both interfaces.
+ * Our character device ioctls. General mtio.h magnetic io commands are
+ * supported here, and not in the corresponding block interface. Our own
+ * ide-tape ioctls are supported on both interfaces.
*/
-static int idetape_chrdev_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
struct ide_tape_obj *tape = ide_tape_f(file);
ide_drive_t *drive = tape->drive;
@@ -4124,7 +3335,30 @@ static int idetape_chrdev_ioctl (struct inode *inode, struct file *file, unsigne
}
}
-static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive);
+/*
+ * Do a mode sense page 0 with block descriptor and if it succeeds set the tape
+ * block size with the reported value.
+ */
+static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
+{
+ idetape_tape_t *tape = drive->driver_data;
+ idetape_pc_t pc;
+
+ idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
+ if (idetape_queue_pc_tail(drive, &pc)) {
+ printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
+ if (tape->tape_block_size == 0) {
+ printk(KERN_WARNING "ide-tape: Cannot deal with zero "
+ "block size, assuming 32k\n");
+ tape->tape_block_size = 32768;
+ }
+ return;
+ }
+ tape->tape_block_size = (pc.buffer[4 + 5] << 16) +
+ (pc.buffer[4 + 6] << 8) +
+ pc.buffer[4 + 7];
+ tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
+}
/*
* Our character device open function.
@@ -4178,7 +3412,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
/* Read block size and write protect status from drive. */
- idetape_get_blocksize_from_block_descriptor(drive);
+ ide_tape_get_bsize_from_bdesc(drive);
/* Set write protect flag if device is opened as read-only. */
if ((filp->f_flags & O_ACCMODE) == O_RDONLY)
@@ -4296,190 +3530,100 @@ static int idetape_identify_device (ide_drive_t *drive)
*((unsigned short *) &gcw) = id->config;
-#if IDETAPE_DEBUG_INFO
- printk(KERN_INFO "ide-tape: Dumping ATAPI Identify Device tape parameters\n");
- printk(KERN_INFO "ide-tape: Protocol Type: ");
- switch (gcw.protocol) {
- case 0: case 1: printk("ATA\n");break;
- case 2: printk("ATAPI\n");break;
- case 3: printk("Reserved (Unknown to ide-tape)\n");break;
- }
- printk(KERN_INFO "ide-tape: Device Type: %x - ",gcw.device_type);
- switch (gcw.device_type) {
- case 0: printk("Direct-access Device\n");break;
- case 1: printk("Streaming Tape Device\n");break;
- case 2: case 3: case 4: printk("Reserved\n");break;
- case 5: printk("CD-ROM Device\n");break;
- case 6: printk("Reserved\n");
- case 7: printk("Optical memory Device\n");break;
- case 0x1f: printk("Unknown or no Device type\n");break;
- default: printk("Reserved\n");
- }
- printk(KERN_INFO "ide-tape: Removable: %s",gcw.removable ? "Yes\n":"No\n");
- printk(KERN_INFO "ide-tape: Command Packet DRQ Type: ");
- switch (gcw.drq_type) {
- case 0: printk("Microprocessor DRQ\n");break;
- case 1: printk("Interrupt DRQ\n");break;
- case 2: printk("Accelerated DRQ\n");break;
- case 3: printk("Reserved\n");break;
- }
- printk(KERN_INFO "ide-tape: Command Packet Size: ");
- switch (gcw.packet_size) {
- case 0: printk("12 bytes\n");break;
- case 1: printk("16 bytes\n");break;
- default: printk("Reserved\n");break;
- }
-#endif /* IDETAPE_DEBUG_INFO */
-
/* Check that we can support this device */
- if (gcw.protocol !=2 )
- printk(KERN_ERR "ide-tape: Protocol is not ATAPI\n");
+ if (gcw.protocol != 2)
+ printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n",
+ gcw.protocol);
else if (gcw.device_type != 1)
- printk(KERN_ERR "ide-tape: Device type is not set to tape\n");
+ printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set "
+ "to tape\n", gcw.device_type);
else if (!gcw.removable)
printk(KERN_ERR "ide-tape: The removable flag is not set\n");
else if (gcw.packet_size != 0) {
- printk(KERN_ERR "ide-tape: Packet size is not 12 bytes long\n");
- if (gcw.packet_size == 1)
- printk(KERN_ERR "ide-tape: Sorry, padding to 16 bytes is still not supported\n");
+ printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 "
+ "bytes long\n", gcw.packet_size);
} else
return 1;
return 0;
}
-/*
- * Use INQUIRY to get the firmware revision
- */
-static void idetape_get_inquiry_results (ide_drive_t *drive)
+static void idetape_get_inquiry_results(ide_drive_t *drive)
{
char *r;
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
- idetape_inquiry_result_t *inquiry;
-
+
idetape_create_inquiry_cmd(&pc);
if (idetape_queue_pc_tail(drive, &pc)) {
- printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n", tape->name);
+ printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
+ tape->name);
return;
}
- inquiry = (idetape_inquiry_result_t *) pc.buffer;
- memcpy(tape->vendor_id, inquiry->vendor_id, 8);
- memcpy(tape->product_id, inquiry->product_id, 16);
- memcpy(tape->firmware_revision, inquiry->revision_level, 4);
+ memcpy(tape->vendor_id, &pc.buffer[8], 8);
+ memcpy(tape->product_id, &pc.buffer[16], 16);
+ memcpy(tape->firmware_revision, &pc.buffer[32], 4);
+
ide_fixstring(tape->vendor_id, 10, 0);
ide_fixstring(tape->product_id, 18, 0);
ide_fixstring(tape->firmware_revision, 6, 0);
r = tape->firmware_revision;
if (*(r + 1) == '.')
- tape->firmware_revision_num = (*r - '0') * 100 + (*(r + 2) - '0') * 10 + *(r + 3) - '0';
- printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n", drive->name, tape->name, tape->vendor_id, tape->product_id, tape->firmware_revision);
+ tape->firmware_revision_num = (*r - '0') * 100 +
+ (*(r + 2) - '0') * 10 + *(r + 3) - '0';
+ printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
+ drive->name, tape->name, tape->vendor_id,
+ tape->product_id, tape->firmware_revision);
}
/*
- * idetape_get_mode_sense_results asks the tape about its various
- * parameters. In particular, we will adjust our data transfer buffer
- * size to the recommended value as returned by the tape.
+ * Ask the tape about its various parameters. In particular, we will adjust our
+ * data transfer buffer size to the recommended value as returned by the tape.
*/
static void idetape_get_mode_sense_results (ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t pc;
- idetape_mode_parameter_header_t *header;
- idetape_capabilities_page_t *capabilities;
-
+ u8 *caps;
+ u8 speed, max_speed;
+
idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
if (idetape_queue_pc_tail(drive, &pc)) {
- printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming some default values\n");
+ printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
+ " some default values\n");
tape->tape_block_size = 512;
- tape->capabilities.ctl = 52;
- tape->capabilities.speed = 450;
- tape->capabilities.buffer_size = 6 * 52;
+ put_unaligned(52, (u16 *)&tape->caps[12]);
+ put_unaligned(540, (u16 *)&tape->caps[14]);
+ put_unaligned(6*52, (u16 *)&tape->caps[16]);
return;
}
- header = (idetape_mode_parameter_header_t *) pc.buffer;
- capabilities = (idetape_capabilities_page_t *) (pc.buffer + sizeof(idetape_mode_parameter_header_t) + header->bdl);
+ caps = pc.buffer + 4 + pc.buffer[3];
- capabilities->max_speed = ntohs(capabilities->max_speed);
- capabilities->ctl = ntohs(capabilities->ctl);
- capabilities->speed = ntohs(capabilities->speed);
- capabilities->buffer_size = ntohs(capabilities->buffer_size);
+ /* convert to host order and save for later use */
+ speed = be16_to_cpu(*(u16 *)&caps[14]);
+ max_speed = be16_to_cpu(*(u16 *)&caps[8]);
- if (!capabilities->speed) {
- printk(KERN_INFO "ide-tape: %s: overriding capabilities->speed (assuming 650KB/sec)\n", drive->name);
- capabilities->speed = 650;
+ put_unaligned(max_speed, (u16 *)&caps[8]);
+ put_unaligned(be16_to_cpu(*(u16 *)&caps[12]), (u16 *)&caps[12]);
+ put_unaligned(speed, (u16 *)&caps[14]);
+ put_unaligned(be16_to_cpu(*(u16 *)&caps[16]), (u16 *)&caps[16]);
+
+ if (!speed) {
+ printk(KERN_INFO "ide-tape: %s: invalid tape speed "
+ "(assuming 650KB/sec)\n", drive->name);
+ put_unaligned(650, (u16 *)&caps[14]);
}
- if (!capabilities->max_speed) {
- printk(KERN_INFO "ide-tape: %s: overriding capabilities->max_speed (assuming 650KB/sec)\n", drive->name);
- capabilities->max_speed = 650;
+ if (!max_speed) {
+ printk(KERN_INFO "ide-tape: %s: invalid max_speed "
+ "(assuming 650KB/sec)\n", drive->name);
+ put_unaligned(650, (u16 *)&caps[8]);
}
- tape->capabilities = *capabilities; /* Save us a copy */
- if (capabilities->blk512)
+ memcpy(&tape->caps, caps, 20);
+ if (caps[7] & 0x02)
tape->tape_block_size = 512;
- else if (capabilities->blk1024)
+ else if (caps[7] & 0x04)
tape->tape_block_size = 1024;
-
-#if IDETAPE_DEBUG_INFO
- printk(KERN_INFO "ide-tape: Dumping the results of the MODE SENSE packet command\n");
- printk(KERN_INFO "ide-tape: Mode Parameter Header:\n");
- printk(KERN_INFO "ide-tape: Mode Data Length - %d\n",header->mode_data_length);
- printk(KERN_INFO "ide-tape: Medium Type - %d\n",header->medium_type);
- printk(KERN_INFO "ide-tape: Device Specific Parameter - %d\n",header->dsp);
- printk(KERN_INFO "ide-tape: Block Descriptor Length - %d\n",header->bdl);
-
- printk(KERN_INFO "ide-tape: Capabilities and Mechanical Status Page:\n");
- printk(KERN_INFO "ide-tape: Page code - %d\n",capabilities->page_code);
- printk(KERN_INFO "ide-tape: Page length - %d\n",capabilities->page_length);
- printk(KERN_INFO "ide-tape: Read only - %s\n",capabilities->ro ? "Yes":"No");
- printk(KERN_INFO "ide-tape: Supports reverse space - %s\n",capabilities->sprev ? "Yes":"No");
- printk(KERN_INFO "ide-tape: Supports erase initiated formatting - %s\n",capabilities->efmt ? "Yes":"No");
- printk(KERN_INFO "ide-tape: Supports QFA two Partition format - %s\n",capabilities->qfa ? "Yes":"No");
- printk(KERN_INFO "ide-tape: Supports locking the medium - %s\n",capabilities->lock ? "Yes":"No");
- printk(KERN_INFO "ide-tape: The volume is currently locked - %s\n",capabilities->locked ? "Yes":"No");
- printk(KERN_INFO "ide-tape: The device defaults in the prevent state - %s\n",capabilities->prevent ? "Yes":"No");
- printk(KERN_INFO "ide-tape: Supports ejecting the medium - %s\n",capabilities->eject ? "Yes":"No");
- printk(KERN_INFO "ide-tape: Supports error correction - %s\n",capabilities->ecc ? "Yes":"No");
- printk(KERN_INFO "ide-tape: Supports data compression - %s\n",capabilities->cmprs ? "Yes":"No");
- printk(KERN_INFO "ide-tape: Supports 512 bytes block size - %s\n",capabilities->blk512 ? "Yes":"No");
- printk(KERN_INFO "ide-tape: Supports 1024 bytes block size - %s\n",capabilities->blk1024 ? "Yes":"No");
- printk(KERN_INFO "ide-tape: Supports 32768 bytes block size / Restricted byte count for PIO transfers - %s\n",capabilities->blk32768 ? "Yes":"No");
- printk(KERN_INFO "ide-tape: Maximum supported speed in KBps - %d\n",capabilities->max_speed);
- printk(KERN_INFO "ide-tape: Continuous transfer limits in blocks - %d\n",capabilities->ctl);
- printk(KERN_INFO "ide-tape: Current speed in KBps - %d\n",capabilities->speed);
- printk(KERN_INFO "ide-tape: Buffer size - %d\n",capabilities->buffer_size*512);
-#endif /* IDETAPE_DEBUG_INFO */
-}
-
-/*
- * ide_get_blocksize_from_block_descriptor does a mode sense page 0 with block descriptor
- * and if it succeeds sets the tape block size with the reported value
- */
-static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive)
-{
-
- idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t pc;
- idetape_mode_parameter_header_t *header;
- idetape_parameter_block_descriptor_t *block_descrp;
-
- idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
- if (idetape_queue_pc_tail(drive, &pc)) {
- printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
- if (tape->tape_block_size == 0) {
- printk(KERN_WARNING "ide-tape: Cannot deal with zero block size, assume 32k\n");
- tape->tape_block_size = 32768;
- }
- return;
- }
- header = (idetape_mode_parameter_header_t *) pc.buffer;
- block_descrp = (idetape_parameter_block_descriptor_t *) (pc.buffer + sizeof(idetape_mode_parameter_header_t));
- tape->tape_block_size =( block_descrp->length[0]<<16) + (block_descrp->length[1]<<8) + block_descrp->length[2];
- tape->drv_write_prot = (header->dsp & 0x80) >> 7;
-
-#if IDETAPE_DEBUG_INFO
- printk(KERN_INFO "ide-tape: Adjusted block size - %d\n", tape->tape_block_size);
-#endif /* IDETAPE_DEBUG_INFO */
}
#ifdef CONFIG_IDE_PROC_FS
@@ -4490,13 +3634,15 @@ static void idetape_add_settings (ide_drive_t *drive)
/*
* drive setting name read/write data type min max mul_factor div_factor data pointer set function
*/
- ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 2, &tape->capabilities.buffer_size, NULL);
+ ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
+ 1, 2, (u16 *)&tape->caps[16], NULL);
ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->min_pipeline, NULL);
ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_stages, NULL);
ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_pipeline, NULL);
ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, NULL);
ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_pending_stages, NULL);
- ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 1, &tape->capabilities.speed, NULL);
+ ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
+ 1, 1, (u16 *)&tape->caps[14], NULL);
ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1024, &tape->stage_size, NULL);
ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_frequency, NULL);
ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL);
@@ -4528,6 +3674,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
struct idetape_id_gcw gcw;
int stage_size;
struct sysinfo si;
+ u16 *ctl = (u16 *)&tape->caps[12];
spin_lock_init(&tape->spinlock);
drive->dsc_overlap = 1;
@@ -4555,13 +3702,13 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
idetape_get_inquiry_results(drive);
idetape_get_mode_sense_results(drive);
- idetape_get_blocksize_from_block_descriptor(drive);
+ ide_tape_get_bsize_from_bdesc(drive);
tape->user_bs_factor = 1;
- tape->stage_size = tape->capabilities.ctl * tape->tape_block_size;
+ tape->stage_size = *ctl * tape->tape_block_size;
while (tape->stage_size > 0xffff) {
printk(KERN_NOTICE "ide-tape: decreasing stage size\n");
- tape->capabilities.ctl /= 2;
- tape->stage_size = tape->capabilities.ctl * tape->tape_block_size;
+ *ctl /= 2;
+ tape->stage_size = *ctl * tape->tape_block_size;
}
stage_size = tape->stage_size;
tape->pages_per_stage = stage_size / PAGE_SIZE;
@@ -4570,11 +3717,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
tape->excess_bh_size = PAGE_SIZE - stage_size % PAGE_SIZE;
}
- /*
- * Select the "best" DSC read/write polling frequency
- * and pipeline size.
- */
- speed = max(tape->capabilities.speed, tape->capabilities.max_speed);
+ /* Select the "best" DSC read/write polling freq and pipeline size. */
+ speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]);
tape->max_stages = speed * 1000 * 10 / tape->stage_size;
@@ -4591,7 +3735,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
tape->max_stages = tape->min_pipeline = tape->max_pipeline = 1;
t1 = (tape->stage_size * HZ) / (speed * 1000);
- tmid = (tape->capabilities.buffer_size * 32 * HZ) / (speed * 125);
+ tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125);
tn = (IDETAPE_FIFO_THRESHOLD * tape->stage_size * HZ) / (speed * 1000);
if (tape->max_stages)
@@ -4606,8 +3750,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
tape->best_dsc_rw_frequency = max_t(unsigned long, min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), IDETAPE_DSC_RW_MIN);
printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
"%dkB pipeline, %lums tDSC%s\n",
- drive->name, tape->name, tape->capabilities.speed,
- (tape->capabilities.buffer_size * 512) / tape->stage_size,
+ drive->name, tape->name, *(u16 *)&tape->caps[14],
+ (*(u16 *)&tape->caps[16] * 512) / tape->stage_size,
tape->stage_size / 1024,
tape->max_stages * tape->stage_size / 1024,
tape->best_dsc_rw_frequency * 1000 / HZ,
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 16a9a581d089..4e1da1c78cb5 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -755,6 +755,7 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
u8 args[4], xfer_rate = 0;
ide_task_t tfargs;
struct ide_taskfile *tf = &tfargs.tf;
+ struct hd_driveid *id = drive->id;
if (NULL == (void *) arg) {
struct request rq;
@@ -792,10 +793,16 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
return -ENOMEM;
}
- if (set_transfer(drive, &tfargs)) {
+ if (tf->command == WIN_SETFEATURES &&
+ tf->feature == SETFEATURES_XFER &&
+ tf->nsect >= XFER_SW_DMA_0 &&
+ (id->dma_ultra || id->dma_mword || id->dma_1word)) {
xfer_rate = args[1];
- if (ide_ata66_check(drive, &tfargs))
+ if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) {
+ printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
+ "be set\n", drive->name);
goto abort;
+ }
}
err = ide_raw_taskfile(drive, &tfargs, buf, args[3]);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index ab9ca2b5b66c..ac6136001615 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -499,6 +499,8 @@ void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
/**
* ide_unregister - free an IDE interface
* @index: index of interface (will change soon to a pointer)
+ * @init_default: init default hwif flag
+ * @restore: restore hwif flag
*
* Perform the final unregister of an IDE interface. At the moment
* we don't refcount interfaces so this will also get split up.
@@ -518,7 +520,7 @@ void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
* This is raving bonkers.
*/
-void ide_unregister(unsigned int index)
+void ide_unregister(unsigned int index, int init_default, int restore)
{
ide_drive_t *drive;
ide_hwif_t *hwif, *g;
@@ -602,9 +604,12 @@ void ide_unregister(unsigned int index)
/* restore hwif data to pristine status */
ide_init_port_data(hwif, index);
- init_hwif_default(hwif, index);
- ide_hwif_restore(hwif, &tmp_hwif);
+ if (init_default)
+ init_hwif_default(hwif, index);
+
+ if (restore)
+ ide_hwif_restore(hwif, &tmp_hwif);
abort:
spin_unlock_irq(&ide_lock);
@@ -678,6 +683,31 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
}
EXPORT_SYMBOL_GPL(ide_init_port_hw);
+ide_hwif_t *ide_deprecated_find_port(unsigned long base)
+{
+ ide_hwif_t *hwif;
+ int i;
+
+ for (i = 0; i < MAX_HWIFS; i++) {
+ hwif = &ide_hwifs[i];
+ if (hwif->io_ports[IDE_DATA_OFFSET] == base)
+ goto found;
+ }
+
+ for (i = 0; i < MAX_HWIFS; i++) {
+ hwif = &ide_hwifs[i];
+ if (hwif->hold)
+ continue;
+ if (!hwif->present && hwif->mate == NULL)
+ goto found;
+ }
+
+ hwif = NULL;
+found:
+ return hwif;
+}
+EXPORT_SYMBOL_GPL(ide_deprecated_find_port);
+
/**
* ide_register_hw - register IDE interface
* @hw: hardware registers
@@ -697,38 +727,26 @@ int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *),
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
do {
- for (index = 0; index < MAX_HWIFS; ++index) {
- hwif = &ide_hwifs[index];
- if (hwif->io_ports[IDE_DATA_OFFSET] == hw->io_ports[IDE_DATA_OFFSET])
- goto found;
- }
- for (index = 0; index < MAX_HWIFS; ++index) {
- hwif = &ide_hwifs[index];
- if (hwif->hold)
- continue;
- if (!hwif->present && hwif->mate == NULL)
- goto found;
- }
+ hwif = ide_deprecated_find_port(hw->io_ports[IDE_DATA_OFFSET]);
+ index = hwif->index;
+ if (hwif)
+ goto found;
for (index = 0; index < MAX_HWIFS; index++)
- ide_unregister(index);
+ ide_unregister(index, 1, 1);
} while (retry--);
return -1;
found:
if (hwif->present)
- ide_unregister(index);
- else if (!hwif->hold) {
+ ide_unregister(index, 0, 1);
+ else if (!hwif->hold)
ide_init_port_data(hwif, index);
- init_hwif_default(hwif, index);
- }
- if (hwif->present)
- return -1;
ide_init_port_hw(hwif, hw);
hwif->quirkproc = quirkproc;
idx[0] = index;
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
if (hwifp)
*hwifp = hwif;
@@ -791,10 +809,6 @@ int set_io_32bit(ide_drive_t *drive, int arg)
return -EBUSY;
drive->io_32bit = arg;
-#ifdef CONFIG_BLK_DEV_DTC2278
- if (HWIF(drive)->chipset == ide_dtc2278)
- HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg;
-#endif /* CONFIG_BLK_DEV_DTC2278 */
spin_unlock_irq(&ide_lock);
@@ -1021,11 +1035,8 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
case HDIO_GET_NICE:
return put_user(drive->dsc_overlap << IDE_NICE_DSC_OVERLAP |
drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP |
- drive->nice0 << IDE_NICE_0 |
- drive->nice1 << IDE_NICE_1 |
- drive->nice2 << IDE_NICE_2,
+ drive->nice1 << IDE_NICE_1,
(long __user *) arg);
-
#ifdef CONFIG_IDE_TASK_IOCTL
case HDIO_DRIVE_TASKFILE:
if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
@@ -1066,7 +1077,7 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
case HDIO_UNREGISTER_HWIF:
if (!capable(CAP_SYS_RAWIO)) return -EACCES;
/* (arg > MAX_HWIFS) checked in function */
- ide_unregister(arg);
+ ide_unregister(arg, 1, 1);
return 0;
case HDIO_SET_NICE:
if (!capable(CAP_SYS_ADMIN)) return -EACCES;
@@ -1711,7 +1722,7 @@ void __exit cleanup_module (void)
int index;
for (index = 0; index < MAX_HWIFS; ++index)
- ide_unregister(index);
+ ide_unregister(index, 0, 0);
proc_ide_destroy();
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index e3ea2096804a..d4d1a6bea599 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -191,9 +191,14 @@ static int __init initRegisters (void) {
return t;
}
+static const struct ide_port_info ali14xx_port_info = {
+ .chipset = ide_ali14xx,
+ .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE,
+ .pio_mask = ATA_PIO4,
+};
+
static int __init ali14xx_probe(void)
{
- ide_hwif_t *hwif, *mate;
static u8 idx[4] = { 0, 1, 0xff, 0xff };
printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
@@ -205,21 +210,10 @@ static int __init ali14xx_probe(void)
return 1;
}
- hwif = &ide_hwifs[0];
- mate = &ide_hwifs[1];
-
- hwif->chipset = ide_ali14xx;
- hwif->pio_mask = ATA_PIO4;
- hwif->set_pio_mode = &ali14xx_set_pio_mode;
- hwif->mate = mate;
-
- mate->chipset = ide_ali14xx;
- mate->pio_mask = ATA_PIO4;
- mate->set_pio_mode = &ali14xx_set_pio_mode;
- mate->mate = hwif;
- mate->channel = 1;
+ ide_hwifs[0].set_pio_mode = &ali14xx_set_pio_mode;
+ ide_hwifs[1].set_pio_mode = &ali14xx_set_pio_mode;
- ide_device_add(idx);
+ ide_device_add(idx, &ali14xx_port_info);
return 0;
}
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index dd3d198ade47..8bdb79da17e8 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -232,7 +232,7 @@ fail_base2:
}
}
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
}
return 0;
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
index 611c9705a3ae..73396f70f2b7 100644
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -84,14 +84,20 @@ static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio)
/* Actually we do - there is a data sheet available for the
Winbond but does anyone actually care */
}
-
- /*
- * 32bit I/O has to be enabled for *both* drives at the same time.
- */
- drive->io_32bit = 1;
- HWIF(drive)->drives[!drive->select.b.unit].io_32bit = 1;
}
+static const struct ide_port_info dtc2278_port_info __initdata = {
+ .chipset = ide_dtc2278,
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_NO_UNMASK_IRQS |
+ IDE_HFLAG_IO_32BIT |
+ /* disallow ->io_32bit changes */
+ IDE_HFLAG_NO_IO_32BIT |
+ IDE_HFLAG_NO_DMA |
+ IDE_HFLAG_NO_AUTOTUNE,
+ .pio_mask = ATA_PIO4,
+};
+
static int __init dtc2278_probe(void)
{
unsigned long flags;
@@ -122,23 +128,9 @@ static int __init dtc2278_probe(void)
#endif
local_irq_restore(flags);
- hwif->serialized = 1;
- hwif->chipset = ide_dtc2278;
- hwif->pio_mask = ATA_PIO4;
hwif->set_pio_mode = &dtc2278_set_pio_mode;
- hwif->drives[0].no_unmask = 1;
- hwif->drives[1].no_unmask = 1;
- hwif->mate = mate;
-
- mate->serialized = 1;
- mate->chipset = ide_dtc2278;
- mate->pio_mask = ATA_PIO4;
- mate->drives[0].no_unmask = 1;
- mate->drives[1].no_unmask = 1;
- mate->mate = hwif;
- mate->channel = 1;
-
- ide_device_add(idx);
+
+ ide_device_add(idx, &dtc2278_port_info);
return 0;
}
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index c9bd6bfb1f3b..85b69a82825f 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -83,7 +83,7 @@ static int __init falconide_init(void)
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
}
}
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index f67c51a2c84a..fc29ce75aff1 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -186,7 +186,7 @@ found:
release_mem_region(res_start, res_n);
}
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
return 0;
}
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 57bc15cddca0..02d12c74764a 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -300,16 +300,36 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio)
#endif
}
+static void __init ht6560b_port_init_devs(ide_hwif_t *hwif)
+{
+ /* Setting default configurations for drives. */
+ int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT;
+
+ if (hwif->channel)
+ t |= (HT_SECONDARY_IF << 8);
+
+ hwif->drives[0].drive_data = t;
+ hwif->drives[1].drive_data = t;
+}
+
int probe_ht6560b = 0;
module_param_named(probe, probe_ht6560b, bool, 0);
MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
+static const struct ide_port_info ht6560b_port_info __initdata = {
+ .chipset = ide_ht6560b,
+ .host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */
+ IDE_HFLAG_NO_DMA |
+ IDE_HFLAG_NO_AUTOTUNE |
+ IDE_HFLAG_ABUSE_PREFETCH,
+ .pio_mask = ATA_PIO5,
+};
+
static int __init ht6560b_init(void)
{
ide_hwif_t *hwif, *mate;
static u8 idx[4] = { 0, 1, 0xff, 0xff };
- int t;
if (probe_ht6560b == 0)
return -ENODEV;
@@ -328,36 +348,16 @@ static int __init ht6560b_init(void)
goto release_region;
}
- hwif->chipset = ide_ht6560b;
hwif->selectproc = &ht6560b_selectproc;
- hwif->host_flags = IDE_HFLAG_ABUSE_PREFETCH;
- hwif->pio_mask = ATA_PIO5;
hwif->set_pio_mode = &ht6560b_set_pio_mode;
- hwif->serialized = 1; /* is this needed? */
- hwif->mate = mate;
- mate->chipset = ide_ht6560b;
mate->selectproc = &ht6560b_selectproc;
- mate->host_flags = IDE_HFLAG_ABUSE_PREFETCH;
- mate->pio_mask = ATA_PIO5;
mate->set_pio_mode = &ht6560b_set_pio_mode;
- mate->serialized = 1; /* is this needed? */
- mate->mate = hwif;
- mate->channel = 1;
-
- /*
- * Setting default configurations for drives
- */
- t = (HT_CONFIG_DEFAULT << 8);
- t |= HT_TIMING_DEFAULT;
- hwif->drives[0].drive_data = t;
- hwif->drives[1].drive_data = t;
- t |= (HT_SECONDARY_IF << 8);
- mate->drives[0].drive_data = t;
- mate->drives[1].drive_data = t;
+ hwif->port_init_devs = ht6560b_port_init_devs;
+ mate->port_init_devs = ht6560b_port_init_devs;
- ide_device_add(idx);
+ ide_device_add(idx, &ht6560b_port_info);
return 0;
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 3bd29676ef6a..15ccf6944ae2 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -145,13 +145,36 @@ static void ide_detach(struct pcmcia_device *link)
static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
{
+ ide_hwif_t *hwif;
hw_regs_t hw;
+ int i;
+ u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+
memset(&hw, 0, sizeof(hw));
- ide_init_hwif_ports(&hw, io, ctl, NULL);
+ ide_std_init_ports(&hw, io, ctl);
hw.irq = irq;
hw.chipset = ide_pci;
hw.dev = &handle->dev;
- return ide_register_hw(&hw, &ide_undecoded_slave, NULL);
+
+ hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+ if (hwif == NULL)
+ return -1;
+
+ i = hwif->index;
+
+ if (hwif->present)
+ ide_unregister(i, 0, 0);
+ else if (!hwif->hold)
+ ide_init_port_data(hwif, i);
+
+ ide_init_port_hw(hwif, &hw);
+ hwif->quirkproc = &ide_undecoded_slave;
+
+ idx[0] = i;
+
+ ide_device_add(idx, NULL);
+
+ return hwif->present ? i : -1;
}
/*======================================================================
@@ -337,7 +360,7 @@ void ide_release(struct pcmcia_device *link)
if (info->ndev) {
/* FIXME: if this fails we need to queue the cleanup somehow
-- need to investigate the required PCMCIA magic */
- ide_unregister(info->hd);
+ ide_unregister(info->hd, 0, 0);
}
info->ndev = 0;
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c
index 7c3231a21d17..26c82ce602de 100644
--- a/drivers/ide/legacy/ide_platform.c
+++ b/drivers/ide/legacy/ide_platform.c
@@ -108,7 +108,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
idx[0] = hwif->index;
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
platform_set_drvdata(pdev, hwif);
@@ -122,7 +122,7 @@ static int __devexit plat_ide_remove(struct platform_device *pdev)
{
ide_hwif_t *hwif = pdev->dev.driver_data;
- ide_unregister(hwif->index);
+ ide_unregister(hwif->index, 0, 0);
return 0;
}
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index c54d07ff64fe..06df8df857a3 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -123,19 +123,9 @@ static int __init macide_init(void)
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
- if (macintosh_config->ide_type == MAC_IDE_BABOON &&
- macintosh_config->ident == MAC_MODEL_PB190) {
- /* Fix breakage in ide-disk.c: drive capacity */
- /* is not initialized for drives without a */
- /* hardware ID, and we can't get that without */
- /* probing the drive which freezes a 190. */
- ide_drive_t *drive = &hwif->drives[0];
- drive->capacity64 = drive->cyl*drive->head*drive->sect;
- }
-
hwif->mmio = 1;
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
}
return 0;
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index a9c6b0609c54..2f0b34d892a1 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -154,7 +154,7 @@ static int __init q40ide_init(void)
}
}
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
return 0;
}
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 37534bb483a7..bba29df5f21d 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -305,18 +305,33 @@ static int __init qd_testreg(int port)
* called to setup an ata channel : adjusts attributes & links for tuning
*/
-static void __init qd_setup(ide_hwif_t *hwif, int base, int config,
- unsigned int data0, unsigned int data1)
+static void __init qd_setup(ide_hwif_t *hwif, int base, int config)
{
- hwif->chipset = ide_qd65xx;
- hwif->channel = hwif->index;
hwif->select_data = base;
hwif->config_data = config;
- hwif->drives[0].drive_data = data0;
- hwif->drives[1].drive_data = data1;
- hwif->drives[0].io_32bit =
- hwif->drives[1].io_32bit = 1;
- hwif->pio_mask = ATA_PIO4;
+}
+
+static void __init qd6500_port_init_devs(ide_hwif_t *hwif)
+{
+ u8 base = hwif->select_data, config = QD_CONFIG(hwif);
+
+ hwif->drives[0].drive_data = QD6500_DEF_DATA;
+ hwif->drives[1].drive_data = QD6500_DEF_DATA;
+}
+
+static void __init qd6580_port_init_devs(ide_hwif_t *hwif)
+{
+ u16 t1, t2;
+ u8 base = hwif->select_data, config = QD_CONFIG(hwif);
+
+ if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) {
+ t1 = QD6580_DEF_DATA;
+ t2 = QD6580_DEF_DATA2;
+ } else
+ t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA;
+
+ hwif->drives[0].drive_data = t1;
+ hwif->drives[1].drive_data = t2;
}
/*
@@ -356,6 +371,14 @@ static void __exit qd_unsetup(ide_hwif_t *hwif)
}
*/
+static const struct ide_port_info qd65xx_port_info __initdata = {
+ .chipset = ide_qd65xx,
+ .host_flags = IDE_HFLAG_IO_32BIT |
+ IDE_HFLAG_NO_DMA |
+ IDE_HFLAG_NO_AUTOTUNE,
+ .pio_mask = ATA_PIO4,
+};
+
/*
* qd_probe:
*
@@ -393,13 +416,14 @@ static int __init qd_probe(int base)
return 1;
}
- qd_setup(hwif, base, config, QD6500_DEF_DATA, QD6500_DEF_DATA);
+ qd_setup(hwif, base, config);
+ hwif->port_init_devs = qd6500_port_init_devs;
hwif->set_pio_mode = &qd6500_set_pio_mode;
- idx[0] = unit;
+ idx[unit] = unit;
- ide_device_add(idx);
+ ide_device_add(idx, &qd65xx_port_info);
return 1;
}
@@ -426,14 +450,15 @@ static int __init qd_probe(int base)
hwif = &ide_hwifs[unit];
printk(KERN_INFO "%s: qd6580: single IDE board\n",
hwif->name);
- qd_setup(hwif, base, config | (control << 8),
- QD6580_DEF_DATA, QD6580_DEF_DATA2);
+ qd_setup(hwif, base, config | (control << 8));
+
+ hwif->port_init_devs = qd6580_port_init_devs;
hwif->set_pio_mode = &qd6580_set_pio_mode;
- idx[0] = unit;
+ idx[unit] = unit;
- ide_device_add(idx);
+ ide_device_add(idx, &qd65xx_port_info);
outb(QD_DEF_CONTR, QD_CONTROL_PORT);
@@ -447,20 +472,20 @@ static int __init qd_probe(int base)
printk(KERN_INFO "%s&%s: qd6580: dual IDE board\n",
hwif->name, mate->name);
- qd_setup(hwif, base, config | (control << 8),
- QD6580_DEF_DATA, QD6580_DEF_DATA);
+ qd_setup(hwif, base, config | (control << 8));
+ hwif->port_init_devs = qd6580_port_init_devs;
hwif->set_pio_mode = &qd6580_set_pio_mode;
- qd_setup(mate, base, config | (control << 8),
- QD6580_DEF_DATA2, QD6580_DEF_DATA2);
+ qd_setup(mate, base, config | (control << 8));
+ mate->port_init_devs = qd6580_port_init_devs;
mate->set_pio_mode = &qd6580_set_pio_mode;
idx[0] = 0;
idx[1] = 1;
- ide_device_add(idx);
+ ide_device_add(idx, &qd65xx_port_info);
outb(QD_DEF_CONTR, QD_CONTROL_PORT);
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
index 26f38ce58776..5696ba026005 100644
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -120,9 +120,14 @@ static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio)
spin_unlock_irqrestore(&ide_lock, flags);
}
+static const struct ide_port_info umc8672_port_info __initdata = {
+ .chipset = ide_umc8672,
+ .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE,
+ .pio_mask = ATA_PIO4,
+};
+
static int __init umc8672_probe(void)
{
- ide_hwif_t *hwif, *mate;
unsigned long flags;
static u8 idx[4] = { 0, 1, 0xff, 0xff };
@@ -143,21 +148,10 @@ static int __init umc8672_probe(void)
umc_set_speeds (current_speeds);
local_irq_restore(flags);
- hwif = &ide_hwifs[0];
- mate = &ide_hwifs[1];
-
- hwif->chipset = ide_umc8672;
- hwif->pio_mask = ATA_PIO4;
- hwif->set_pio_mode = &umc_set_pio_mode;
- hwif->mate = mate;
-
- mate->chipset = ide_umc8672;
- mate->pio_mask = ATA_PIO4;
- mate->set_pio_mode = &umc_set_pio_mode;
- mate->mate = hwif;
- mate->channel = 1;
+ ide_hwifs[0].set_pio_mode = &umc_set_pio_mode;
+ ide_hwifs[1].set_pio_mode = &umc_set_pio_mode;
- ide_device_add(idx);
+ ide_device_add(idx, &umc8672_port_info);
return 0;
}
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index cd42b30a7a3b..0f4bf5d72835 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -548,6 +548,17 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
*ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET);
}
+static const struct ide_port_info au1xxx_port_info = {
+ .host_flags = IDE_HFLAG_POST_SET_MODE |
+ IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+ IDE_HFLAG_NO_IO_32BIT |
+ IDE_HFLAG_UNMASK_IRQS,
+ .pio_mask = ATA_PIO4,
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ .mwdma_mask = ATA_MWDMA2,
+#endif
+};
+
static int au_ide_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -606,21 +617,6 @@ static int au_ide_probe(struct device *dev)
hwif->dev = dev;
- hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
-#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
- hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */
- hwif->swdma_mask = 0x00;
-#else
- hwif->mwdma_mask = 0x0;
- hwif->swdma_mask = 0x0;
-#endif
-
- hwif->pio_mask = ATA_PIO4;
- hwif->host_flags = IDE_HFLAG_POST_SET_MODE;
-
- hwif->drives[0].unmask = 1;
- hwif->drives[1].unmask = 1;
-
/* hold should be on in all cases */
hwif->hold = 1;
@@ -651,16 +647,9 @@ static int au_ide_probe(struct device *dev)
hwif->ide_dma_test_irq = &auide_dma_test_irq;
hwif->dma_lost_irq = &auide_dma_lost_irq;
#endif
- hwif->channel = 0;
hwif->select_data = 0; /* no chipset-specific code */
hwif->config_data = 0; /* no chipset-specific code */
- hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */
- hwif->drives[1].autotune = 1;
-
- hwif->drives[0].no_io_32bit = 1;
- hwif->drives[1].no_io_32bit = 1;
-
auide_hwif.hwif = hwif;
hwif->hwif_data = &auide_hwif;
@@ -671,7 +660,7 @@ static int au_ide_probe(struct device *dev)
idx[0] = hwif->index;
- ide_device_add(idx);
+ ide_device_add(idx, &au1xxx_port_info);
dev_set_drvdata(dev, hwif);
@@ -688,7 +677,7 @@ static int au_ide_remove(struct device *dev)
ide_hwif_t *hwif = dev_get_drvdata(dev);
_auide_hwif *ahwif = &auide_hwif;
- ide_unregister(hwif->index);
+ ide_unregister(hwif->index, 0, 0);
iounmap((void *)ahwif->regbase);
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
index 8b3959dfa2b7..956259fc09ba 100644
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -129,7 +129,7 @@ static int __devinit swarm_ide_probe(struct device *dev)
idx[0] = hwif->index;
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
dev_set_drvdata(dev, hwif);
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 824df78c7012..cfb3265bc1a8 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -7,7 +7,6 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
@@ -166,6 +165,16 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
return dev->irq;
}
+static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
+
+ pci_read_config_byte(dev, 0x49, &ata66);
+
+ return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -174,21 +183,10 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
hwif->set_dma_mode = &aec6210_set_mode;
- else
+ else {
hwif->set_dma_mode = &aec6260_set_mode;
- if (hwif->dma_base == 0)
- return;
-
- if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
- return;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
- u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
-
- pci_read_config_byte(dev, 0x49, &ata66);
-
- hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+ hwif->cable_detect = atp86x_cable_detect;
}
}
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 130cc6e784e5..b3b6f514ce2d 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -31,7 +31,6 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
@@ -666,13 +665,12 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
hwif->set_dma_mode = &ali_set_dma_mode;
hwif->udma_filter = &ali_udma_filter;
+ hwif->cable_detect = ata66_ali15x3;
+
if (hwif->dma_base == 0)
return;
hwif->dma_setup = &ali15x3_dma_setup;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_ali15x3(hwif);
}
/**
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 8c52bc9eaa59..2ef890ce8097 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -17,12 +17,9 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
-#include <asm/io.h>
#include "ide-timing.h"
@@ -199,6 +196,14 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
return dev->irq;
}
+static u8 __devinit amd_cable_detect(ide_hwif_t *hwif)
+{
+ if ((amd_80w >> hwif->channel) & 1)
+ return ATA_CBL_PATA80;
+ else
+ return ATA_CBL_PATA40;
+}
+
static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -209,15 +214,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
hwif->set_pio_mode = &amd_set_pio_mode;
hwif->set_dma_mode = &amd_set_drive;
- if (!hwif->dma_base)
- return;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
- if ((amd_80w >> hwif->channel) & 1)
- hwif->cbl = ATA_CBL_PATA80;
- else
- hwif->cbl = ATA_CBL_PATA40;
- }
+ hwif->cable_detect = amd_cable_detect;
}
#define IDE_HFLAGS_AMD \
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index b56274af1782..7e037c880cb0 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -6,15 +6,11 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
-#include <linux/delay.h>
#include <linux/init.h>
-#include <asm/io.h>
-
#define ATIIXP_IDE_PIO_TIMING 0x40
#define ATIIXP_IDE_MDMA_TIMING 0x44
#define ATIIXP_IDE_PIO_CONTROL 0x48
@@ -121,6 +117,19 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
spin_unlock_irqrestore(&atiixp_lock, flags);
}
+static u8 __devinit atiixp_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
+ u8 udma_mode = 0, ch = hwif->channel;
+
+ pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
+
+ if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
+ return ATA_CBL_PATA80;
+ else
+ return ATA_CBL_PATA40;
+}
+
/**
* init_hwif_atiixp - fill in the hwif for the ATIIXP
* @hwif: IDE interface
@@ -131,21 +140,10 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- u8 udma_mode = 0, ch = hwif->channel;
-
hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->set_dma_mode = &atiixp_set_dma_mode;
- if (!hwif->dma_base)
- return;
-
- pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
-
- if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
- hwif->cbl = ATA_CBL_PATA80;
- else
- hwif->cbl = ATA_CBL_PATA40;
+ hwif->cable_detect = atiixp_cable_detect;
}
static const struct ide_port_info atiixp_pci_info[] __devinitdata = {
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 7240c20b9593..bd24dad3cfc6 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -103,10 +103,6 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
@@ -703,6 +699,18 @@ static int pci_conf2(void)
return 0;
}
+static const struct ide_port_info cmd640_port_info __initdata = {
+ .chipset = ide_cmd640,
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_NO_DMA |
+ IDE_HFLAG_NO_AUTOTUNE |
+ IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_ABUSE_FAST_DEVSEL,
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ .pio_mask = ATA_PIO5,
+#endif
+};
+
/*
* Probe for a cmd640 chipset, and initialize it if found.
*/
@@ -760,11 +768,7 @@ static int __init cmd640x_init(void)
setup_device_ptrs ();
printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n",
cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
- cmd_hwif0->chipset = ide_cmd640;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- cmd_hwif0->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
- IDE_HFLAG_ABUSE_FAST_DEVSEL;
- cmd_hwif0->pio_mask = ATA_PIO5;
cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
@@ -815,23 +819,14 @@ static int __init cmd640x_init(void)
* Initialize data for secondary cmd640 port, if enabled
*/
if (second_port_cmd640) {
- cmd_hwif0->serialized = 1;
- cmd_hwif1->serialized = 1;
- cmd_hwif1->chipset = ide_cmd640;
- cmd_hwif0->mate = cmd_hwif1;
- cmd_hwif1->mate = cmd_hwif0;
- cmd_hwif1->channel = 1;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- cmd_hwif1->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
- IDE_HFLAG_ABUSE_FAST_DEVSEL;
- cmd_hwif1->pio_mask = ATA_PIO5;
cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
idx[1] = cmd_hwif1->index;
}
printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,
- cmd_hwif0->serialized ? "" : "not ", port2);
+ second_port_cmd640 ? "" : "not ", port2);
/*
* Establish initial timings/prefetch for all drives.
@@ -876,7 +871,7 @@ static int __init cmd640x_init(void)
cmd640_dump_regs();
#endif
- ide_device_add(idx);
+ ide_device_add(idx, &cmd640_port_info);
return 1;
}
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 04aa9e59670e..edabe6299efd 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -13,7 +13,6 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
@@ -393,6 +392,8 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
hwif->set_pio_mode = &cmd64x_set_pio_mode;
hwif->set_dma_mode = &cmd64x_set_dma_mode;
+ hwif->cable_detect = ata66_cmd64x;
+
if (!hwif->dma_base)
return;
@@ -411,9 +412,6 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
if (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 5)
hwif->ultra_mask = 0x00;
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_cmd64x(hwif);
-
switch (dev->device) {
case PCI_DEVICE_ID_CMD_648:
case PCI_DEVICE_ID_CMD_649:
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index eb68a9ad0c98..0be1a824102b 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -35,22 +35,12 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
-
-#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/dma-mapping.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
struct pio_clocks
{
int address;
@@ -180,7 +170,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
ide_pci_setup_ports(dev, d, 14, &idx[0]);
- ide_device_add(idx);
+ ide_device_add(idx, d);
return 0;
}
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 765aac397ced..941a1344820b 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -15,18 +15,12 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
+
#include <asm/io.h>
-#include <asm/irq.h>
/*
* Here are the standard PIO mode 0-4 timings for each "format".
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 66433aa53f59..d7b5ea992e94 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -155,8 +155,9 @@ static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
cs5535_set_speed(drive, XFER_PIO_0 + pio);
}
-static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
+static u8 __devinit cs5535_cable_detect(ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 bit;
/* if a 80 wire cable was detected */
@@ -175,15 +176,10 @@ static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
*/
static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
hwif->set_pio_mode = &cs5535_set_pio_mode;
hwif->set_dma_mode = &cs5535_set_dma_mode;
- if (hwif->dma_base == 0)
- return;
-
- hwif->cbl = cs5535_cable_detect(dev);
+ hwif->cable_detect = cs5535_cable_detect;
}
static const struct ide_port_info cs5535_chipset __devinitdata = {
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 50100ac8770f..724cbacf4e5b 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -45,7 +45,6 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/init.h>
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index 27e47fc97100..3f9cd64c26a6 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -16,15 +16,14 @@
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
-#include <linux/autoconf.h>
+
#include <linux/types.h>
#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/pci.h>
+
#include <asm/io.h>
/*
@@ -52,6 +51,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
ide_hwif_t *hwif = NULL;
ide_drive_t *drive;
int i, rc;
+ u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
rc = pci_enable_device(dev);
if (rc) {
@@ -78,12 +78,27 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
hw.irq = dev->irq;
hw.chipset = ide_pci; /* this enables IRQ sharing */
- rc = ide_register_hw(&hw, &ide_undecoded_slave, &hwif);
- if (rc < 0) {
- printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc);
- pci_disable_device(dev);
- return -ENODEV;
- }
+ hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+ if (hwif == NULL)
+ goto out_disable;
+
+ i = hwif->index;
+
+ if (hwif->present)
+ ide_unregister(i, 0, 0);
+ else if (!hwif->hold)
+ ide_init_port_data(hwif, i);
+
+ ide_init_port_hw(hwif, &hw);
+ hwif->quirkproc = &ide_undecoded_slave;
+
+ idx[0] = i;
+
+ ide_device_add(idx, NULL);
+
+ if (!hwif->present)
+ goto out_disable;
+
pci_set_drvdata(dev, hwif);
hwif->dev = &dev->dev;
drive = &hwif->drives[0];
@@ -92,6 +107,11 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
drive->unmask = 1;
}
return 0;
+
+out_disable:
+ printk(KERN_ERR "delkin_cb: no IDE devices found\n");
+ pci_disable_device(dev);
+ return -ENODEV;
}
static void
@@ -100,7 +120,8 @@ delkin_cb_remove (struct pci_dev *dev)
ide_hwif_t *hwif = pci_get_drvdata(dev);
if (hwif)
- ide_unregister(hwif->index);
+ ide_unregister(hwif->index, 0, 0);
+
pci_disable_device(dev);
}
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 59ebe84f1053..9262a9174b4e 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -22,18 +22,11 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <asm/io.h>
-
static int ide_generic_all; /* Set to claim all devices */
/*
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index 25dbb814822d..9f01da46b016 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -26,20 +26,13 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
#define HPT343_DEBUG_DRIVE_INFO 0
static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 5623cad569da..d0f7bb8b8adf 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -121,12 +121,8 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
-
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
@@ -134,7 +130,6 @@
#include <asm/uaccess.h>
#include <asm/io.h>
-#include <asm/irq.h>
/* various tuning parameters */
#define HPT_RESET_STATE_ENGINE
@@ -1279,12 +1274,55 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
return dev->irq;
}
+static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct hpt_info *info = pci_get_drvdata(dev);
+ u8 chip_type = info->chip_type;
+ u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
+
+ /*
+ * The HPT37x uses the CBLID pins as outputs for MA15/MA16
+ * address lines to access an external EEPROM. To read valid
+ * cable detect state the pins must be enabled as inputs.
+ */
+ if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
+ /*
+ * HPT374 PCI function 1
+ * - set bit 15 of reg 0x52 to enable TCBLID as input
+ * - set bit 15 of reg 0x56 to enable FCBLID as input
+ */
+ u8 mcr_addr = hwif->select_data + 2;
+ u16 mcr;
+
+ pci_read_config_word(dev, mcr_addr, &mcr);
+ pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
+ /* now read cable id register */
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ pci_write_config_word(dev, mcr_addr, mcr);
+ } else if (chip_type >= HPT370) {
+ /*
+ * HPT370/372 and 374 pcifn 0
+ * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
+ */
+ u8 scr2 = 0;
+
+ pci_read_config_byte(dev, 0x5b, &scr2);
+ pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
+ /* now read cable id register */
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ pci_write_config_byte(dev, 0x5b, scr2);
+ } else
+ pci_read_config_byte(dev, 0x5a, &scr1);
+
+ return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
int serialize = HPT_SERIALIZE_IO;
- u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
u8 chip_type = info->chip_type;
u8 new_mcr, old_mcr = 0;
@@ -1301,6 +1339,8 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
hwif->udma_filter = &hpt3xx_udma_filter;
hwif->mdma_filter = &hpt3xx_mdma_filter;
+ hwif->cable_detect = hpt3xx_cable_detect;
+
/*
* HPT3xxN chips have some complications:
*
@@ -1346,43 +1386,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
if (hwif->dma_base == 0)
return;
- /*
- * The HPT37x uses the CBLID pins as outputs for MA15/MA16
- * address lines to access an external EEPROM. To read valid
- * cable detect state the pins must be enabled as inputs.
- */
- if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
- /*
- * HPT374 PCI function 1
- * - set bit 15 of reg 0x52 to enable TCBLID as input
- * - set bit 15 of reg 0x56 to enable FCBLID as input
- */
- u8 mcr_addr = hwif->select_data + 2;
- u16 mcr;
-
- pci_read_config_word (dev, mcr_addr, &mcr);
- pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
- /* now read cable id register */
- pci_read_config_byte (dev, 0x5a, &scr1);
- pci_write_config_word(dev, mcr_addr, mcr);
- } else if (chip_type >= HPT370) {
- /*
- * HPT370/372 and 374 pcifn 0
- * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
- */
- u8 scr2 = 0;
-
- pci_read_config_byte (dev, 0x5b, &scr2);
- pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
- /* now read cable id register */
- pci_read_config_byte (dev, 0x5a, &scr1);
- pci_write_config_byte(dev, 0x5b, scr2);
- } else
- pci_read_config_byte (dev, 0x5a, &scr1);
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-
if (chip_type >= HPT374) {
hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
hwif->ide_dma_end = &hpt374_ide_dma_end;
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index df74e588a530..e3427eaab430 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -10,13 +10,10 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <asm/io.h>
-
/**
* it8213_set_pio_mode - set host controller for PIO mode
* @drive: drive
@@ -143,6 +140,16 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
}
}
+static u8 __devinit it8213_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u8 reg42h = 0;
+
+ pci_read_config_byte(dev, 0x42, &reg42h);
+
+ return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
/**
* init_hwif_it8213 - set up hwif structs
* @hwif: interface to set up
@@ -152,19 +159,10 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 reg42h = 0;
-
hwif->set_dma_mode = &it8213_set_dma_mode;
hwif->set_pio_mode = &it8213_set_pio_mode;
- if (!hwif->dma_base)
- return;
-
- pci_read_config_byte(dev, 0x42, &reg42h);
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+ hwif->cable_detect = it8213_cable_detect;
}
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 938d35f35c81..1597f0cc1bf1 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -63,13 +63,10 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <asm/io.h>
-
struct it821x_dev
{
unsigned int smart:1, /* Are we in smart raid mode */
@@ -579,14 +576,13 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
} else
hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
+ hwif->cable_detect = ata66_it821x;
+
if (hwif->dma_base == 0)
return;
hwif->ultra_mask = ATA_UDMA6;
hwif->mwdma_mask = ATA_MWDMA2;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_it821x(hwif);
}
static void __devinit it8212_disable_raid(struct pci_dev *dev)
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 8b40f6479c55..a56bcb4f22f4 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -8,13 +8,10 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <asm/io.h>
-
typedef enum {
PORT_PATA0 = 0,
PORT_PATA1 = 1,
@@ -111,11 +108,7 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
hwif->set_pio_mode = &jmicron_set_pio_mode;
hwif->set_dma_mode = &jmicron_set_dma_mode;
- if (hwif->dma_base == 0)
- return;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_jmicron(hwif);
+ hwif->cable_detect = ata66_jmicron;
}
static const struct ide_port_info jmicron_chipset __devinitdata = {
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index fc9eee9ccac3..bf0d3b2931f1 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -10,11 +10,7 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
#include <linux/interrupt.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/delay.h>
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 0ce92d323036..46e8748f507e 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -87,11 +87,6 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
@@ -320,14 +315,18 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
spin_unlock_irqrestore(&opti621_lock, flags);
}
+static void __devinit opti621_port_init_devs(ide_hwif_t *hwif)
+{
+ hwif->drives[0].drive_data = PIO_DONT_KNOW;
+ hwif->drives[1].drive_data = PIO_DONT_KNOW;
+}
+
/*
* init_hwif_opti621() is called once for each hwif found at boot.
*/
static void __devinit init_hwif_opti621 (ide_hwif_t *hwif)
{
- hwif->drives[0].drive_data = PIO_DONT_KNOW;
- hwif->drives[1].drive_data = PIO_DONT_KNOW;
-
+ hwif->port_init_devs = opti621_port_init_devs;
hwif->set_pio_mode = &opti621_set_pio_mode;
}
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index bb29db03540e..1c8cb7797a4a 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -19,18 +19,12 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <asm/io.h>
-#include <asm/irq.h>
#ifdef CONFIG_PPC_PMAC
#include <asm/prom.h>
@@ -197,7 +191,7 @@ static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
}
}
-static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
+static u8 __devinit pdcnew_cable_detect(ide_hwif_t *hwif)
{
if (get_indexed_reg(hwif, 0x0b) & 0x04)
return ATA_CBL_PATA40;
@@ -456,11 +450,7 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
hwif->quirkproc = &pdcnew_quirkproc;
hwif->resetproc = &pdcnew_reset;
- if (hwif->dma_base == 0)
- return;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = pdcnew_cable_detect(hwif);
+ hwif->cable_detect = pdcnew_cable_detect;
}
static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev)
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 31a1308414a0..da4329790387 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -32,18 +32,13 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <asm/io.h>
-#include <asm/irq.h>
#define PDC202XX_DEBUG_DRIVE_INFO 0
@@ -140,10 +135,10 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
}
-static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
+static u8 __devinit pdc2026x_old_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10);
+ u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10);
pci_read_config_word(dev, 0x50, &CIS);
@@ -311,9 +306,12 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
hwif->quirkproc = &pdc202xx_quirkproc;
- if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
+ if (dev->device != PCI_DEVICE_ID_PROMISE_20246) {
hwif->resetproc = &pdc202xx_reset;
+ hwif->cable_detect = pdc2026x_old_cable_detect;
+ }
+
if (hwif->dma_base == 0)
return;
@@ -321,9 +319,6 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
hwif->dma_timeout = &pdc202xx_dma_timeout;
if (dev->device != PCI_DEVICE_ID_PROMISE_20246) {
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = pdc202xx_old_cable_detect(hwif);
-
hwif->dma_start = &pdc202xx_old_ide_dma_start;
hwif->ide_dma_end = &pdc202xx_old_ide_dma_end;
}
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index c1a6b68337d5..decef0f47674 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -47,11 +47,9 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
-#include <linux/delay.h>
#include <linux/init.h>
#include <asm/io.h>
@@ -290,14 +288,11 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif)
hwif->set_pio_mode = &piix_set_pio_mode;
hwif->set_dma_mode = &piix_set_dma_mode;
+ hwif->cable_detect = piix_cable_detect;
+
if (!hwif->dma_base)
return;
- if (hwif->ultra_mask & 0x78) {
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = piix_cable_detect(hwif);
- }
-
if (no_piix_dma)
hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0;
}
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index 7ed6625819d4..51676612f78f 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -16,18 +16,11 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <asm/io.h>
-
static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -40,8 +33,7 @@ static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
} else {
if (hwif->mate)
hwif->mate->serialized = hwif->serialized = 1;
- hwif->drives[0].no_unmask = 1;
- hwif->drives[1].no_unmask = 1;
+ hwif->host_flags |= IDE_HFLAG_NO_UNMASK_IRQS;
printk(KERN_INFO "%s: serialized, disabled unmasking "
"(buggy RZ1000/RZ1001)\n", hwif->name);
}
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index af499a60eb31..561aa47c7720 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -14,19 +14,13 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/pm.h>
+
#include <asm/io.h>
-#include <asm/irq.h>
#define SC1200_REV_A 0x00
#define SC1200_REV_B1 0x01
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 7694969b02ce..238e3e181e87 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -644,6 +644,11 @@ static void __devinit init_iops_scc(ide_hwif_t *hwif)
init_mmio_iops_scc(hwif);
}
+static u8 __devinit scc_cable_detect(ide_hwif_t *hwif)
+{
+ return ATA_CBL_PATA80;
+}
+
/**
* init_hwif_scc - set up hwif
* @hwif: interface to set up
@@ -678,8 +683,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
else
hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
- /* we support 80c cable only. */
- hwif->cbl = ATA_CBL_PATA80;
+ hwif->cable_detect = scc_cable_detect;
}
#define DECLARE_SCC_DEV(name_str) \
@@ -732,7 +736,7 @@ static void __devexit scc_remove(struct pci_dev *dev)
hwif->dmatable_cpu = NULL;
}
- ide_unregister(hwif->index);
+ ide_unregister(hwif->index, 0, 0);
hwif->chipset = ide_unknown;
iounmap((void*)ports->dma);
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index f495253b7d41..c11880b0709f 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -31,12 +31,10 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
-#include <linux/delay.h>
#include <asm/io.h>
@@ -346,13 +344,8 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
hwif->set_dma_mode = &svwks_set_dma_mode;
hwif->udma_filter = &svwks_udma_filter;
- if (!hwif->dma_base)
- return;
-
- if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_svwks(hwif);
- }
+ if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE)
+ hwif->cable_detect = ata66_svwks;
}
#define IDE_HFLAGS_SVWKS \
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 85902074b1fc..054626497be4 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -25,8 +25,6 @@
#include <linux/hdreg.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/scatterlist.h>
@@ -555,7 +553,6 @@ static void __devinit
ide_init_sgiioc4(ide_hwif_t * hwif)
{
hwif->mmio = 1;
- hwif->pio_mask = 0x00;
hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */
hwif->set_dma_mode = &sgiioc4_set_dma_mode;
hwif->selectproc = NULL;/* Use the default routine to select drive */
@@ -572,8 +569,6 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
if (hwif->dma_base == 0)
return;
- hwif->mwdma_mask = ATA_MWDMA2_ONLY;
-
hwif->dma_host_set = &sgiioc4_dma_host_set;
hwif->dma_setup = &sgiioc4_ide_dma_setup;
hwif->dma_start = &sgiioc4_ide_dma_start;
@@ -583,6 +578,13 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
hwif->dma_timeout = &ide_dma_timeout;
}
+static const struct ide_port_info sgiioc4_port_info __devinitdata = {
+ .chipset = ide_pci,
+ .host_flags = IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+ IDE_HFLAG_NO_AUTOTUNE,
+ .mwdma_mask = ATA_MWDMA2_ONLY,
+};
+
static int __devinit
sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
{
@@ -593,6 +595,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
int h;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
hw_regs_t hw;
+ struct ide_port_info d = sgiioc4_port_info;
/*
* Find an empty HWIF; if none available, return -ENOMEM.
@@ -641,7 +644,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
ide_init_port_hw(hwif, &hw);
hwif->dev = &dev->dev;
- hwif->channel = 0; /* Single Channel chip */
/* The IOC4 uses MMIO rather than Port IO. */
default_hwif_mmiops(hwif);
@@ -649,15 +651,17 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
/* Initializing chipset IRQ Registers */
writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
- if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base))
+ if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base)) {
printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n",
hwif->name, DRV_NAME);
+ d.mwdma_mask = 0;
+ }
ide_init_sgiioc4(hwif);
idx[0] = hwif->index;
- if (ide_device_add(idx))
+ if (ide_device_add(idx, &d))
return -EIO;
return 0;
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 4877bc8cd599..ef5b39fa042b 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -39,7 +39,6 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
@@ -332,15 +331,18 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long addr = siimage_selreg(hwif, 0x1);
+ void __iomem *sata_error_addr
+ = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
- if (SATA_ERROR_REG) {
+ if (sata_error_addr) {
unsigned long base = (unsigned long)hwif->hwif_data;
-
u32 ext_stat = readl((void __iomem *)(base + 0x10));
u8 watchdog = 0;
+
if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
- u32 sata_error = readl((void __iomem *)SATA_ERROR_REG);
- writel(sata_error, (void __iomem *)SATA_ERROR_REG);
+ u32 sata_error = readl(sata_error_addr);
+
+ writel(sata_error, sata_error_addr);
watchdog = (sata_error & 0x00680000) ? 1 : 0;
printk(KERN_WARNING "%s: sata_error = 0x%08x, "
"watchdog = %d, %s\n",
@@ -419,13 +421,17 @@ static int sil_sata_busproc(ide_drive_t * drive, int state)
static int sil_sata_reset_poll(ide_drive_t *drive)
{
- if (SATA_STATUS_REG) {
- ide_hwif_t *hwif = HWIF(drive);
+ ide_hwif_t *hwif = drive->hwif;
+ void __iomem *sata_status_addr
+ = (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET];
- /* SATA_STATUS_REG is valid only when in MMIO mode */
- if ((readl((void __iomem *)SATA_STATUS_REG) & 0x03) != 0x03) {
+ if (sata_status_addr) {
+ /* SATA Status is available only when in MMIO mode */
+ u32 sata_stat = readl(sata_status_addr);
+
+ if ((sata_stat & 0x03) != 0x03) {
printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
- hwif->name, readl((void __iomem *)SATA_STATUS_REG));
+ hwif->name, sata_stat);
HWGROUP(drive)->polling = 0;
return ide_started;
}
@@ -827,15 +833,14 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
} else
hwif->udma_filter = &sil_pata_udma_filter;
+ hwif->cable_detect = ata66_siimage;
+
if (hwif->dma_base == 0)
return;
if (sata)
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_siimage(hwif);
-
if (hwif->mmio) {
hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq;
} else {
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 2a461de22aa0..512bb4c1fd5c 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -47,20 +47,11 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
-
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
-#include <asm/irq.h>
-
#include "ide-timing.h"
/* registers layout and init values are chipset family dependant */
@@ -565,13 +556,12 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
if (chipset_family >= ATA_133)
hwif->udma_filter = sis5513_ata133_udma_filter;
+ hwif->cable_detect = ata66_sis5513;
+
if (hwif->dma_base == 0)
return;
hwif->ultra_mask = udma_rates[chipset_family];
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = ata66_sis5513(hwif);
}
static const struct ide_port_info sis5513_chipset __devinitdata = {
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index da13a1298ada..ee261ae15b6f 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -17,17 +17,11 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <asm/io.h>
-#include <asm/dma.h>
#undef DEBUG
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index a6cf810c4699..65f4c2ffaa59 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -10,15 +10,11 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
-#include <linux/delay.h>
#include <linux/init.h>
-#include <asm/io.h>
-
static DEFINE_SPINLOCK(slc90e66_lock);
static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
@@ -118,23 +114,23 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
}
}
-static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
+static u8 __devinit slc90e66_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 reg47 = 0;
- u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */
-
- hwif->set_pio_mode = &slc90e66_set_pio_mode;
- hwif->set_dma_mode = &slc90e66_set_dma_mode;
+ u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
pci_read_config_byte(dev, 0x47, &reg47);
- if (hwif->dma_base == 0)
- return;
+ /* bit[0(1)]: 0:80, 1:40 */
+ return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
+static void __devinit init_hwif_slc90e66(ide_hwif_t *hwif)
+{
+ hwif->set_pio_mode = &slc90e66_set_pio_mode;
+ hwif->set_dma_mode = &slc90e66_set_dma_mode;
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- /* bit[0(1)]: 0:80, 1:40 */
- hwif->cbl = (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+ hwif->cable_detect = slc90e66_cable_detect;
}
static const struct ide_port_info slc90e66_chipset __devinitdata = {
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 9fbbb4f2dd54..2ef2ed2f2b32 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -160,6 +160,19 @@ static int tc86c001_busproc(ide_drive_t *drive, int state)
return 0;
}
+static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long sc_base = pci_resource_start(dev, 5);
+ u16 scr1 = inw(sc_base + 0x00);
+
+ /*
+ * System Control 1 Register bit 13 (PDIAGN):
+ * 0=80-pin cable, 1=40-pin cable
+ */
+ return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -183,6 +196,8 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
hwif->busproc = &tc86c001_busproc;
+ hwif->cable_detect = tc86c001_cable_detect;
+
if (!hwif->dma_base)
return;
@@ -196,15 +211,6 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
hwif->rqsize = 0xffff;
hwif->dma_start = &tc86c001_dma_start;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
- /*
- * System Control 1 Register bit 13 (PDIAGN):
- * 0=80-pin cable, 1=40-pin cable
- */
- scr1 = inw(sc_base + 0x00);
- hwif->cbl = (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
- }
}
static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev,
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index 852b72693736..a67d02a3f96e 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -28,11 +28,6 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index d9ebb698953a..de750f7a43e9 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -131,14 +131,12 @@
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/ide.h>
#include <asm/io.h>
@@ -179,10 +177,7 @@ static void trm290_selectproc (ide_drive_t *drive)
static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
- BUG_ON(HWGROUP(drive)->handler != NULL); /* paranoia check */
- ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL);
- /* issue cmd to drive */
- outb(command, IDE_COMMAND_REG);
+ ide_execute_command(drive, command, &ide_dma_intr, WAIT_CMD, NULL);
}
static int trm290_dma_setup(ide_drive_t *drive)
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 24cb9047fb41..f3f79f805813 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -26,15 +26,11 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/dmi.h>
-#include <asm/io.h>
-
#ifdef CONFIG_PPC_CHRP
#include <asm/processor.h>
#endif
@@ -424,11 +420,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
hwif->set_pio_mode = &via_set_pio_mode;
hwif->set_dma_mode = &via_set_drive;
- if (!hwif->dma_base)
- return;
-
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = via82cxxx_cable_detect(hwif);
+ hwif->cable_detect = via82cxxx_cable_detect;
}
static const struct ide_port_info via82cxxx_chipset __devinitdata = {
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index 45c1d55e60df..06190b1c4ec5 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -848,7 +848,7 @@ static int __init mpc8xx_ide_probe(void)
#endif
#endif
- ide_device_add(idx);
+ ide_device_add(idx, NULL);
return 0;
}
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 23112ef68f67..12ac3bfb4f9a 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -412,7 +412,7 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time)
*/
#define IDE_WAKEUP_DELAY (1*HZ)
-static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
+static int pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
@@ -1003,6 +1003,17 @@ pmac_ide_do_resume(ide_hwif_t *hwif)
return 0;
}
+static const struct ide_port_info pmac_port_info = {
+ .chipset = ide_pmac,
+ .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
+ IDE_HFLAG_PIO_NO_DOWNGRADE |
+ IDE_HFLAG_POST_SET_MODE |
+ IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+ IDE_HFLAG_UNMASK_IRQS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+};
+
/*
* Setup, register & probe an IDE channel driven by this driver, this is
* called by one of the 2 probe functions (macio or PCI). Note that a channel
@@ -1016,23 +1027,28 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
struct device_node *np = pmif->node;
const int *bidp;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ struct ide_port_info d = pmac_port_info;
pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
- if (of_device_is_compatible(np, "shasta-ata"))
+ if (of_device_is_compatible(np, "shasta-ata")) {
pmif->kind = controller_sh_ata6;
- else if (of_device_is_compatible(np, "kauai-ata"))
+ d.udma_mask = ATA_UDMA6;
+ } else if (of_device_is_compatible(np, "kauai-ata")) {
pmif->kind = controller_un_ata6;
- else if (of_device_is_compatible(np, "K2-UATA"))
+ d.udma_mask = ATA_UDMA5;
+ } else if (of_device_is_compatible(np, "K2-UATA")) {
pmif->kind = controller_k2_ata6;
- else if (of_device_is_compatible(np, "keylargo-ata")) {
- if (strcmp(np->name, "ata-4") == 0)
+ d.udma_mask = ATA_UDMA5;
+ } else if (of_device_is_compatible(np, "keylargo-ata")) {
+ if (strcmp(np->name, "ata-4") == 0) {
pmif->kind = controller_kl_ata4;
- else
+ d.udma_mask = ATA_UDMA4;
+ } else
pmif->kind = controller_kl_ata3;
- } else if (of_device_is_compatible(np, "heathrow-ata"))
+ } else if (of_device_is_compatible(np, "heathrow-ata")) {
pmif->kind = controller_heathrow;
- else {
+ } else {
pmif->kind = controller_ohare;
pmif->broken_dma = 1;
}
@@ -1101,19 +1117,10 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
/* Tell common code _not_ to mess with resources */
hwif->mmio = 1;
hwif->hwif_data = pmif;
- hw->chipset = ide_pmac;
ide_init_port_hw(hwif, hw);
hwif->noprobe = pmif->mediabay;
hwif->hold = pmif->mediabay;
hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
- hwif->drives[0].unmask = 1;
- hwif->drives[1].unmask = 1;
- hwif->drives[0].autotune = IDE_TUNE_AUTO;
- hwif->drives[1].autotune = IDE_TUNE_AUTO;
- hwif->host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
- IDE_HFLAG_PIO_NO_DOWNGRADE |
- IDE_HFLAG_POST_SET_MODE;
- hwif->pio_mask = ATA_PIO4;
hwif->set_pio_mode = pmac_ide_set_pio_mode;
if (pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
@@ -1133,14 +1140,16 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
#endif /* CONFIG_PMAC_MEDIABAY */
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+ if (pmif->cable_80 == 0)
+ d.udma_mask &= ATA_UDMA2;
/* has a DBDMA controller channel */
- if (pmif->dma_regs)
- pmac_ide_setup_dma(pmif, hwif);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+ if (pmif->dma_regs == 0 || pmac_ide_setup_dma(pmif, hwif) < 0)
+#endif
+ d.udma_mask = d.mwdma_mask = 0;
idx[0] = hwif->index;
- ide_device_add(idx);
+ ide_device_add(idx, &d);
return 0;
}
@@ -1721,8 +1730,7 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive)
* Allocate the data structures needed for using DMA with an interface
* and fill the proper list of functions pointers
*/
-static void __devinit
-pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
+static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -1730,7 +1738,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
* DMA routines ...
*/
if (dev == NULL)
- return;
+ return -ENODEV;
/*
* Allocate space for the DBDMA commands.
* The +2 is +1 for the stop command and +1 to allow for
@@ -1743,7 +1751,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
if (pmif->dma_table_cpu == NULL) {
printk(KERN_ERR "%s: unable to allocate DMA command list\n",
hwif->name);
- return;
+ return -ENOMEM;
}
hwif->sg_max_nents = MAX_DCMDS;
@@ -1757,29 +1765,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->dma_timeout = &ide_dma_timeout;
hwif->dma_lost_irq = &pmac_ide_dma_lost_irq;
- switch(pmif->kind) {
- case controller_sh_ata6:
- hwif->ultra_mask = pmif->cable_80 ? 0x7f : 0x07;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- case controller_un_ata6:
- case controller_k2_ata6:
- hwif->ultra_mask = pmif->cable_80 ? 0x3f : 0x07;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- case controller_kl_ata4:
- hwif->ultra_mask = pmif->cable_80 ? 0x1f : 0x07;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- default:
- hwif->ultra_mask = 0x00;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- }
+ return 0;
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 05db429a7da8..634e3f6a9608 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -339,7 +339,8 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
* ide_hwif_configure - configure an IDE interface
* @dev: PCI device holding interface
* @d: IDE port info
- * @mate: Paired interface if any
+ * @port: port number
+ * @irq: PCI IRQ
*
* Perform the initial set up for the hardware interface structure. This
* is done per interface port rather than per PCI device. There may be
@@ -348,7 +349,9 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
* Returns the new hardware interface structure, or NULL on a failure
*/
-static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *mate, int port, int irq)
+static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev,
+ const struct ide_port_info *d,
+ unsigned int port, int irq)
{
unsigned long ctl = 0, base = 0;
ide_hwif_t *hwif;
@@ -394,29 +397,24 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port
hwif->dev = &dev->dev;
hwif->cds = d;
- hwif->channel = port;
- if (mate) {
- hwif->mate = mate;
- mate->mate = hwif;
- }
return hwif;
}
+#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_hwif_setup_dma - configure DMA interface
- * @dev: PCI device
- * @d: IDE port info
* @hwif: IDE interface
+ * @d: IDE port info
*
* Set up the DMA base for the interface. Enable the master bits as
* necessary and attempt to bring the device DMA into a ready to use
* state
*/
-static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *hwif)
+void ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
{
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 pcicmd;
pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
@@ -448,8 +446,8 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info *
"(BIOS)\n", hwif->name, d->name);
}
}
-#endif /* CONFIG_BLK_DEV_IDEDMA_PCI*/
}
+#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
/**
* ide_setup_pci_controller - set up IDE PCI
@@ -511,7 +509,7 @@ out:
void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int pciirq, u8 *idx)
{
int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
- ide_hwif_t *hwif, *mate = NULL;
+ ide_hwif_t *hwif;
u8 tmp;
/*
@@ -527,56 +525,11 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int
continue; /* port not enabled */
}
- if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL)
+ hwif = ide_hwif_configure(dev, d, port, pciirq);
+ if (hwif == NULL)
continue;
*(idx + port) = hwif->index;
-
- if (d->init_iops)
- d->init_iops(hwif);
-
- if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
- ide_hwif_setup_dma(dev, d, hwif);
-
- if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) ||
- (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
- hwif->irq = port ? 15 : 14;
-
- hwif->host_flags = d->host_flags;
- hwif->pio_mask = d->pio_mask;
-
- if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate)
- hwif->mate->serialized = hwif->serialized = 1;
-
- if (d->host_flags & IDE_HFLAG_IO_32BIT) {
- hwif->drives[0].io_32bit = 1;
- hwif->drives[1].io_32bit = 1;
- }
-
- if (d->host_flags & IDE_HFLAG_UNMASK_IRQS) {
- hwif->drives[0].unmask = 1;
- hwif->drives[1].unmask = 1;
- }
-
- if (hwif->dma_base) {
- hwif->swdma_mask = d->swdma_mask;
- hwif->mwdma_mask = d->mwdma_mask;
- hwif->ultra_mask = d->udma_mask;
- }
-
- hwif->drives[0].autotune = 1;
- hwif->drives[1].autotune = 1;
-
- if (d->host_flags & IDE_HFLAG_RQSIZE_256)
- hwif->rqsize = 256;
-
- if (d->init_hwif)
- /* Call chipset-specific routine
- * for each enabled hwif
- */
- d->init_hwif(hwif);
-
- mate = hwif;
}
}
@@ -658,7 +611,7 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
ret = do_ide_setup_pci_device(dev, d, &idx[0], 1);
if (ret >= 0)
- ide_device_add(idx);
+ ide_device_add(idx, d);
return ret;
}
@@ -682,7 +635,7 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
goto out;
}
- ide_device_add(idx);
+ ide_device_add(idx, d);
out:
return ret;
}
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 18dde2a27209..de9ebbfbf122 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -595,7 +595,7 @@ static void media_bay_step(int i)
if (bay->cd_index >= 0) {
printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i,
bay->cd_index);
- ide_unregister(bay->cd_index);
+ ide_unregister(bay->cd_index, 1, 1);
bay->cd_index = -1;
}
if (bay->cd_retry) {
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 5ed00069846d..6c4f0f081785 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -588,19 +588,14 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc)
hwif->sg_mapped = 0;
}
- SELECT_DRIVE(drive);
-
ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK, bcount, dma);
if (dma)
set_bit(PC_DMA_OK, &pc->flags);
if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) {
- BUG_ON(HWGROUP(drive)->handler != NULL);
- ide_set_handler(drive, &idescsi_transfer_pc,
- get_timeout(pc), idescsi_expiry);
- /* Issue the packet command */
- HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG);
+ ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc,
+ get_timeout(pc), idescsi_expiry);
return ide_started;
} else {
/* Issue the packet command */
diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
index ff43f8d6b5b3..3882013d29ea 100644
--- a/include/linux/hdreg.h
+++ b/include/linux/hdreg.h
@@ -706,8 +706,10 @@ struct hd_driveid {
*/
#define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */
#define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */
-#define IDE_NICE_0 (2) /* when sure that it won't affect us */
#define IDE_NICE_1 (3) /* when probably won't affect us much */
+#ifndef __KERNEL__
+#define IDE_NICE_0 (2) /* when sure that it won't affect us */
#define IDE_NICE_2 (4) /* when we know it's on our expense */
+#endif
#endif /* _LINUX_HDREG_H */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index ec10b2a3bb6e..367c17084a28 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -112,18 +112,12 @@ typedef unsigned char byte; /* used everywhere */
#define SATA_NR_PORTS (3) /* 16 possible ?? */
#define SATA_STATUS_OFFSET (0)
-#define SATA_STATUS_REG (HWIF(drive)->sata_scr[SATA_STATUS_OFFSET])
#define SATA_ERROR_OFFSET (1)
-#define SATA_ERROR_REG (HWIF(drive)->sata_scr[SATA_ERROR_OFFSET])
#define SATA_CONTROL_OFFSET (2)
-#define SATA_CONTROL_REG (HWIF(drive)->sata_scr[SATA_CONTROL_OFFSET])
#define SATA_MISC_OFFSET (0)
-#define SATA_MISC_REG (HWIF(drive)->sata_misc[SATA_MISC_OFFSET])
#define SATA_PHY_OFFSET (1)
-#define SATA_PHY_REG (HWIF(drive)->sata_misc[SATA_PHY_OFFSET])
#define SATA_IEN_OFFSET (2)
-#define SATA_IEN_REG (HWIF(drive)->sata_misc[SATA_IEN_OFFSET])
/*
* Our Physical Region Descriptor (PRD) table should be large enough
@@ -196,6 +190,7 @@ typedef struct hw_regs_s {
} hw_regs_t;
struct hwif_s * ide_find_port(unsigned long);
+struct hwif_s *ide_deprecated_find_port(unsigned long);
void ide_init_port_data(struct hwif_s *, unsigned int);
void ide_init_port_hw(struct hwif_s *, hw_regs_t *);
@@ -406,8 +401,6 @@ typedef struct ide_drive_s {
unsigned no_unmask : 1; /* disallow setting unmask bit */
unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */
- unsigned nice0 : 1; /* give obvious excess bandwidth */
- unsigned nice2 : 1; /* give a share in our own bandwidth */
unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
unsigned nodma : 1; /* disallow DMA */
unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */
@@ -487,7 +480,6 @@ typedef struct hwif_s {
u8 major; /* our major number */
u8 index; /* 0 for ide0; 1 for ide1; ... */
u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
- u8 straight8; /* Alan's straight 8 check */
u8 bus_state; /* power state of the IDE bus */
u32 host_flags;
@@ -513,6 +505,8 @@ typedef struct hwif_s {
#if 0
ide_hwif_ops_t *hwifops;
#else
+ /* host specific initialization of devices on a port */
+ void (*port_init_devs)(struct hwif_s *);
/* routine to program host for PIO mode */
void (*set_pio_mode)(ide_drive_t *, const u8);
/* routine to program host for DMA mode */
@@ -535,6 +529,8 @@ typedef struct hwif_s {
u8 (*mdma_filter)(ide_drive_t *);
u8 (*udma_filter)(ide_drive_t *);
+ u8 (*cable_detect)(struct hwif_s *);
+
void (*ata_input_data)(ide_drive_t *, void *, u32);
void (*ata_output_data)(ide_drive_t *, void *, u32);
@@ -602,10 +598,9 @@ typedef struct hwif_s {
unsigned serialized : 1; /* serialized all channel operation */
unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
unsigned reset : 1; /* reset after probe */
- unsigned auto_poll : 1; /* supports nop auto-poll */
unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
- unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */
unsigned mmio : 1; /* host uses MMIO */
+ unsigned straight8 : 1; /* Alan's straight 8 check */
struct device gendev;
struct completion gendev_rel_comp; /* To deal with device release() */
@@ -625,6 +620,9 @@ typedef struct hwif_s {
typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
typedef int (ide_expiry_t)(ide_drive_t *);
+/* used by ide-cd, ide-floppy, etc. */
+typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
+
typedef struct hwgroup_s {
/* irq handler, if active */
ide_startstop_t (*handler)(ide_drive_t *);
@@ -708,6 +706,7 @@ typedef struct {
void proc_ide_create(void);
void proc_ide_destroy(void);
void ide_proc_register_port(ide_hwif_t *);
+void ide_proc_port_register_devices(ide_hwif_t *);
void ide_proc_unregister_port(ide_hwif_t *);
void ide_proc_register_driver(ide_drive_t *, ide_driver_t *);
void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *);
@@ -740,6 +739,7 @@ void ide_pci_create_host_proc(const char *, get_info_t *);
static inline void proc_ide_create(void) { ; }
static inline void proc_ide_destroy(void) { ; }
static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
+static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
@@ -988,10 +988,8 @@ int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
extern int system_bus_clock(void);
extern int ide_driveid_update(ide_drive_t *);
-extern int ide_ata66_check(ide_drive_t *, ide_task_t *);
extern int ide_config_drive_speed(ide_drive_t *, u8);
extern u8 eighty_ninty_three (ide_drive_t *);
-extern int set_transfer(ide_drive_t *, ide_task_t *);
extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
@@ -1016,6 +1014,13 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o
void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *);
void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
+#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+void ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
+#else
+static inline void ide_hwif_setup_dma(ide_hwif_t *hwif,
+ const struct ide_port_info *d) { }
+#endif
+
extern void default_hwif_iops(ide_hwif_t *);
extern void default_hwif_mmiops(ide_hwif_t *);
extern void default_hwif_transport(ide_hwif_t *);
@@ -1052,7 +1057,7 @@ enum {
IDE_HFLAG_NO_SET_MODE = (1 << 9),
/* trust BIOS for programming chipset/device for DMA */
IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10),
- /* host uses VDMA */
+ /* host uses VDMA (tied with IDE_HFLAG_CS5520 for now) */
IDE_HFLAG_VDMA = (1 << 11),
/* ATAPI DMA is unsupported */
IDE_HFLAG_NO_ATAPI_DMA = (1 << 12),
@@ -1062,8 +1067,10 @@ enum {
IDE_HFLAG_NO_DMA = (1 << 14),
/* check if host is PCI IDE device before allowing DMA */
IDE_HFLAG_NO_AUTODMA = (1 << 15),
+ /* don't autotune PIO */
+ IDE_HFLAG_NO_AUTOTUNE = (1 << 16),
/* host is CS5510/CS5520 */
- IDE_HFLAG_CS5520 = (1 << 16),
+ IDE_HFLAG_CS5520 = IDE_HFLAG_VDMA,
/* no LBA48 */
IDE_HFLAG_NO_LBA48 = (1 << 17),
/* no LBA48 DMA */
@@ -1089,6 +1096,10 @@ enum {
IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28),
/* DSC overlap is unsupported */
IDE_HFLAG_NO_DSC = (1 << 29),
+ /* never use 32-bit I/O ops */
+ IDE_HFLAG_NO_IO_32BIT = (1 << 30),
+ /* never unmask IRQs */
+ IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
@@ -1144,6 +1155,7 @@ void ide_dma_off_quietly(ide_drive_t *);
void ide_dma_off(ide_drive_t *);
void ide_dma_on(ide_drive_t *);
int ide_set_dma(ide_drive_t *);
+void ide_check_dma_crc(ide_drive_t *);
ide_startstop_t ide_dma_intr(ide_drive_t *);
int ide_build_sglist(ide_drive_t *, struct request *);
@@ -1171,6 +1183,7 @@ static inline void ide_dma_off(ide_drive_t *drive) { ; }
static inline void ide_dma_on(ide_drive_t *drive) { ; }
static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
+static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
#endif /* CONFIG_BLK_DEV_IDEDMA */
#ifndef CONFIG_BLK_DEV_IDEDMA_PCI
@@ -1182,27 +1195,29 @@ extern int ide_acpi_exec_tfs(ide_drive_t *drive);
extern void ide_acpi_get_timing(ide_hwif_t *hwif);
extern void ide_acpi_push_timing(ide_hwif_t *hwif);
extern void ide_acpi_init(ide_hwif_t *hwif);
+void ide_acpi_port_init_devices(ide_hwif_t *);
extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
#else
static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
#endif
void ide_remove_port_from_hwgroup(ide_hwif_t *);
extern int ide_hwif_request_regions(ide_hwif_t *hwif);
extern void ide_hwif_release_regions(ide_hwif_t* hwif);
-extern void ide_unregister (unsigned int index);
+void ide_unregister(unsigned int, int, int);
void ide_register_region(struct gendisk *);
void ide_unregister_region(struct gendisk *);
void ide_undecoded_slave(ide_drive_t *);
-int ide_device_add_all(u8 *idx);
-int ide_device_add(u8 idx[4]);
+int ide_device_add_all(u8 *idx, const struct ide_port_info *);
+int ide_device_add(u8 idx[4], const struct ide_port_info *);
static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
{