diff options
author | Olof Johansson <olof@lixom.net> | 2014-02-18 22:19:33 -0800 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2014-02-18 22:19:33 -0800 |
commit | 11d73c56b96b4297bd96273e9a22b7c72d13f1fa (patch) | |
tree | 3edc8cfa1508dabd06a7d3e0d615cea943ba0cca | |
parent | 6d0abeca3242a88cab8232e4acd7e2bf088f3bc2 (diff) | |
parent | fb3174e4ad2427c6ad90c67093d6ca97f13e8672 (diff) | |
download | linux-11d73c56b96b4297bd96273e9a22b7c72d13f1fa.tar.bz2 |
Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux into next/cleanup
This cleanup series gets rid of <mach/timex.h> for platforms not using
ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since
387798b (ARM: initial multiplatform support).)
To make this work some code out of arch/arm needed to be adapted. The
respective changes got acks by their maintainers to be taken via armsoc
(with Andrew Morton substituting for Alessandro Zummo as rtc maintainer).
Compared to the previous pull request there was another patch added that
fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not
squash this fix into the original commit to save him from the need to
reverify the series.
* tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux:
ARM: ixp4xx: fix timer latch calculation
ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too
ARM: rpc: stop using <mach/timex.h>
ARM: ixp4xx: stop using <mach/timex.h>
input: ixp4xx-beeper: don't use symbols from <mach/timex.h>
ARM: at91: don't use <mach/timex.h>
ARM: ep93xx: stop using mach/timex.h
ARM: mmp: stop using mach/timex.h
ARM: netx: stop using mach/timex.h
ARM: sa1100: stop using mach/timex.h
clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE
rtc: pxa: drop unused #define TIMER_FREQ
rtc: at91sam9: include <mach/hardware.h> explicitly
ARM/serial: at91: switch atmel serial to use gpiolib
Signed-off-by: Olof Johansson <olof@lixom.net>
74 files changed, 153 insertions, 732 deletions
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index 9c5d19ac935c..17c1042b2df8 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -13,6 +13,8 @@ Required properties: Optional properties: - atmel,use-dma-rx: use of PDC or DMA for receiving data - atmel,use-dma-tx: use of PDC or DMA for transmitting data +- rts-gpios: specify a GPIO for RTS line. It will use specified PIO instead of the peripheral + function pin for the USART RTS feature. If unsure, don't specify this property. - add dma bindings for dma transfer: - dmas: DMA specifier, consisting of a phandle to DMA controller node, memory peripheral interface and USART DMA channel ID, FIFO configuration. @@ -33,6 +35,7 @@ Example: clock-names = "usart"; atmel,use-dma-rx; atmel,use-dma-tx; + rts-gpios = <&pioD 15 0>; }; - use DMA: diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index 83f2aa83899c..f6fcc67ef06e 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -12,12 +12,6 @@ #ifndef _ASMARM_TIMEX_H #define _ASMARM_TIMEX_H -#ifdef CONFIG_ARCH_MULTIPLATFORM -#define CLOCK_TICK_RATE 1000000 -#else -#include <mach/timex.h> -#endif - typedef unsigned long cycles_t; #define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index e47f5fd232f5..787bb50a4dff 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -21,6 +21,7 @@ #include <mach/at91rm9200.h> #include <mach/at91_st.h> #include <mach/cpu.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "soc.h" diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 3ebc9792560c..f3f19f21352a 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -21,6 +21,7 @@ #include <mach/at91rm9200.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -922,6 +923,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -960,6 +962,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -987,9 +990,10 @@ static inline void configure_usart0_pins(unsigned pins) if (pins & ATMEL_UART_RTS) { /* * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. - * We need to drive the pin manually. Default is off (RTS is active low). + * We need to drive the pin manually. The serial driver will driver + * this to high when initializing. */ - at91_set_gpio_output(AT91_PIN_PA21, 1); + uart0_data.rts_gpio = AT91_PIN_PA21; } } @@ -1009,6 +1013,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1060,6 +1065,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1103,6 +1109,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index bc7b363a3083..7fd13aef9827 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -31,6 +31,7 @@ #include <asm/mach/time.h> #include <mach/at91_st.h> +#include <mach/hardware.h> static unsigned long last_crtr; static u32 irqmask; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 6c821e562159..c3d22be73b7c 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -21,6 +21,7 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index eda8d1679d40..2ae7715f1309 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -25,6 +25,7 @@ #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/at91_adc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -819,6 +820,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -857,6 +859,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -908,6 +911,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -951,6 +955,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -994,6 +999,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); @@ -1037,6 +1043,7 @@ static struct resource uart4_resources[] = { static struct atmel_uart_data uart4_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart4_dmamask = DMA_BIT_MASK(32); @@ -1075,6 +1082,7 @@ static struct resource uart5_resources[] = { static struct atmel_uart_data uart5_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart5_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 6276b4c1acfe..48b51f796d6a 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -20,6 +20,7 @@ #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index b2a34740146a..80e35895d28f 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -25,6 +25,7 @@ #include <mach/at91sam9261_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -880,6 +881,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -918,6 +920,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -961,6 +964,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1004,6 +1008,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 37b90f4b990c..486530c3973b 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -19,6 +19,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9263.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 4aeadddbc181..43d53d6156dd 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -24,6 +24,7 @@ #include <mach/at91sam9263_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -1324,6 +1325,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1362,6 +1364,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1405,6 +1408,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1448,6 +1452,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 0f04ffe9c5a8..0a9e2fc8f796 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -19,6 +19,7 @@ #include <linux/of_irq.h> #include <asm/mach/time.h> +#include <mach/hardware.h> #define AT91_PIT_MR 0x00 /* Mode Register */ #define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 2f455ce35268..8c11696f606e 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -20,6 +20,7 @@ #include <asm/system_misc.h> #include <mach/at91sam9g45.h> #include <mach/cpu.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "soc.h" diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index cb36fa872d30..77b04c2edd78 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -32,6 +32,7 @@ #include <mach/at91sam9_smc.h> #include <linux/platform_data/dma-atmel.h> #include <mach/atmel-mci.h> +#include <mach/hardware.h> #include <media/atmel-isi.h> @@ -1587,6 +1588,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1625,6 +1627,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1668,6 +1671,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1711,6 +1715,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1754,6 +1759,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 3651517abedf..c0d5474706f8 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -20,6 +20,7 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index a698bdab2cce..428fc412aaf1 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -21,6 +21,7 @@ #include <mach/at91sam9rl_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include <linux/platform_data/dma-atmel.h> #include "board.h" @@ -956,6 +957,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -994,6 +996,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1045,6 +1048,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1088,6 +1092,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1131,6 +1136,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index bad94b84a46f..7523f1cdfe1d 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -19,7 +19,7 @@ #include <asm/mach/arch.h> #include <mach/at91x40.h> #include <mach/at91_st.h> -#include <mach/timex.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index c0e637adf65d..07d0bf2ac2da 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -25,6 +25,7 @@ #include <linux/time.h> #include <linux/io.h> #include <mach/hardware.h> +#include <mach/at91x40.h> #include <asm/mach/time.h> #include "at91_tc.h" diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index c1d61d247790..416bae8435ee 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -31,6 +31,7 @@ #include <asm/mach/arch.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 65c0d6b5ecba..5f25fa54eb93 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -30,6 +30,7 @@ #include <asm/mach/arch.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 869cbecf00b7..e4a5ac17cdbc 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -26,6 +26,7 @@ #include <asm/mach/arch.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index 90680217064e..38dca2bb027f 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -55,4 +55,6 @@ #define AT91_PS_CR (AT91_PS + 0) /* PS Control register */ #define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */ +#define AT91X40_MASTER_CLOCK 40000000 + #endif /* AT91X40_H */ diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h deleted file mode 100644 index 5e917a66edd7..000000000000 --- a/arch/arm/mach-at91/include/mach/timex.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/timex.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include <mach/hardware.h> - -#ifdef CONFIG_ARCH_AT91X40 - -#define AT91X40_MASTER_CLOCK 40000000 -#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) - -#else - -#define CLOCK_TICK_RATE 12345678 - -#endif - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 590b52dea9f7..8bda1cefdf96 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -27,6 +27,7 @@ #include <asm/mach/irq.h> #include <mach/cpu.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "generic.h" diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h deleted file mode 100644 index de6fd192d1c3..000000000000 --- a/arch/arm/mach-clps711x/include/mach/timex.h +++ /dev/null @@ -1,2 +0,0 @@ -/* Bogus value */ -#define CLOCK_TICK_RATE 512000 diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h deleted file mode 100644 index 9b885298f106..000000000000 --- a/arch/arm/mach-davinci/include/mach/timex.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * DaVinci timer defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz, - * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/ - * linux/jiffies.h) are not used directly in code. Currently none of the - * code relevant to DaVinci platform depends on these values directly. - */ -#define CLOCK_TICK_RATE 27000000 - -#endif /* __ASM_ARCH_TIMEX_H__ */ diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h deleted file mode 100644 index 251d538541db..000000000000 --- a/arch/arm/mach-dove/include/mach/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h deleted file mode 100644 index 4fb43b22a102..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-ebsa110/include/mach/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA110 architecture timex specifications - */ - -/* - * On the EBSA, the clock ticks at weird rates. - * This is therefore not used to calculate the - * divisor. - */ -#define CLOCK_TICK_RATE 47894000 - diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 157ba88433c9..6c705472da6c 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -117,7 +117,7 @@ void __init ep93xx_map_io(void) #define EP93XX_TIMER4_CLOCK 983040 #define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1) -#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) +#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ) static unsigned int last_jiffy_time; diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h deleted file mode 100644 index 6b3503b01fa6..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/timex.h - */ - -#define CLOCK_TICK_RATE 983040 diff --git a/arch/arm/mach-exynos/include/mach/timex.h b/arch/arm/mach-exynos/include/mach/timex.h deleted file mode 100644 index 6d138750a708..000000000000 --- a/arch/arm/mach-exynos/include/mach/timex.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/timex.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Based on arch/arm/mach-s5p6442/include/mach/timex.h - * - * EXYNOS4 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h deleted file mode 100644 index d0fea9d6d4ab..000000000000 --- a/arch/arm/mach-footbridge/include/mach/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/timex.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA285 architecture timex specifications - */ - -/* - * We assume a constant here; this satisfies the maths in linux/timex.h - * and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but - * this must be a constant. - */ -#define CLOCK_TICK_RATE (50000000/16) diff --git a/arch/arm/mach-gemini/include/mach/timex.h b/arch/arm/mach-gemini/include/mach/timex.h deleted file mode 100644 index dc5690ba975c..000000000000 --- a/arch/arm/mach-gemini/include/mach/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * Gemini timex specifications - * - * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* When AHB bus frequency is 150MHz */ -#define CLOCK_TICK_RATE 38000000 diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h deleted file mode 100644 index 1dcb42028c82..000000000000 --- a/arch/arm/mach-integrator/include/mach/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/timex.h - * - * Integrator architecture timex specifications - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * ?? - */ -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h deleted file mode 100644 index 45fb2745bb54..000000000000 --- a/arch/arm/mach-iop13xx/include/mach/timex.h +++ /dev/null @@ -1 +0,0 @@ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h deleted file mode 100644 index 7262ab81419d..000000000000 --- a/arch/arm/mach-iop32x/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/timex.h - * - * IOP32x architecture timex specifications - */ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h deleted file mode 100644 index 54c589091d6e..000000000000 --- a/arch/arm/mach-iop33x/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/timex.h - * - * IOP3xx architecture timex specifications - */ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 6d68aed6548a..dc5d7a0e5d9c 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -23,7 +23,6 @@ #include <linux/interrupt.h> #include <linux/bitops.h> #include <linux/time.h> -#include <linux/timex.h> #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> @@ -45,6 +44,17 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> +#define IXP4XX_TIMER_FREQ 66666000 + +/* + * The timer register doesn't allow to specify the two least significant bits of + * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is + * the best value with the two least significant bits unset. + */ +#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \ + (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \ + (IXP4XX_OST_RELOAD_MASK + 1) + static void __init ixp4xx_clocksource_init(void); static void __init ixp4xx_clockevent_init(void); static struct clock_event_device clockevent_ixp4xx; @@ -520,7 +530,7 @@ static void ixp4xx_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK; + osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK; opts = IXP4XX_OST_ENABLE; break; case CLOCK_EVT_MODE_ONESHOT: diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h deleted file mode 100644 index 0396d89f947c..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/timex.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/timex.h - * - */ - -#include <mach/ixp4xx-regs.h> - -/* - * We use IXP425 General purpose timer for our timer needs, it runs at - * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the - * timer register ignores the bottom 2 bits of the LATCH value. - */ -#define IXP4XX_TIMER_FREQ 66666000 -#define CLOCK_TICK_RATE \ - (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) - diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h deleted file mode 100644 index c923cd169b9c..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/timex.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h deleted file mode 100644 index 10f716371bd3..000000000000 --- a/arch/arm/mach-ks8695/include/mach/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/timex.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * KS8695 - Time Parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include <mach/hardware.h> - -#define CLOCK_TICK_RATE KS8695_CLOCK_RATE - -#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h deleted file mode 100644 index 8d4066b16b3f..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/timex.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/timex.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * Rate in Hz of the main system oscillator. This value should match - * the value 'MAIN_OSC_FREQ' in platform.h - */ -#define CLOCK_TICK_RATE 13000000 - -#endif diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h deleted file mode 100644 index 70c9f1d88c02..000000000000 --- a/arch/arm/mach-mmp/include/mach/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/timex.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifdef CONFIG_CPU_MMP2 -#define CLOCK_TICK_RATE 6500000 -#else -#define CLOCK_TICK_RATE 3250000 -#endif diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 024022d91fe3..048997e75dd0 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -39,6 +39,12 @@ #include "clock.h" +#ifdef CONFIG_CPU_MMP2 +#define MMP_CLOCK_FREQ 6500000 +#else +#define MMP_CLOCK_FREQ 3250000 +#endif + #define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE #define MAX_DELTA (0xfffffffe) @@ -195,14 +201,14 @@ void __init timer_init(int irq) { timer_config(); - sched_clock_register(mmp_read_sched_clock, 32, CLOCK_TICK_RATE); + sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ); ckevt.cpumask = cpumask_of(0); setup_irq(irq, &timer_irq); - clocksource_register_hz(&cksrc, CLOCK_TICK_RATE); - clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE, + clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ); + clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ, MIN_DELTA, MAX_DELTA); } diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h deleted file mode 100644 index a62e6b215aec..000000000000 --- a/arch/arm/mach-msm/include/mach/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-msm/include/mach/timex.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_TIMEX_H -#define __ASM_ARCH_MSM_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h deleted file mode 100644 index 0e8c443c723a..000000000000 --- a/arch/arm/mach-mv78xx0/include/mach/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h deleted file mode 100644 index 1120dd0ba393..000000000000 --- a/arch/arm/mach-netx/include/mach/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/timex.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE 100000000 diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 6df42e643031..e2346013e227 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -28,6 +28,9 @@ #include <asm/mach/time.h> #include <mach/netx-regs.h> +#define NETX_CLOCK_FREQ 100000000 +#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ) + #define TIMER_CLOCKEVENT 0 #define TIMER_CLOCKSOURCE 1 @@ -41,7 +44,7 @@ static void netx_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - writel(LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); + writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); tmode = NETX_GPIO_COUNTER_CTRL_RST_EN | NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN; @@ -114,7 +117,7 @@ void __init netx_timer_init(void) /* Reset the timer value to zero */ writel(0, NETX_GPIO_COUNTER_CURRENT(0)); - writel(LATCH, NETX_GPIO_COUNTER_MAX(0)); + writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0)); /* acknowledge interrupt */ writel(COUNTER_BIT(0), NETX_GPIO_IRQ); @@ -137,11 +140,11 @@ void __init netx_timer_init(void) NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE)); clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE), - "netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up); + "netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up); /* with max_delta_ns >= delta2ns(0x800) the system currently runs fine. * Adding some safety ... */ netx_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE, + clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ, 0xa00, 0xfffffffe); } diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h deleted file mode 100644 index 4793790d53cc..000000000000 --- a/arch/arm/mach-omap1/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/timex.h - */ - -#include <plat/timex.h> diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h deleted file mode 100644 index de9f8fc40e7c..000000000000 --- a/arch/arm/mach-omap2/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/timex.h - */ - -#include <plat/timex.h> diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h deleted file mode 100644 index 4c69820e0810..000000000000 --- a/arch/arm/mach-orion5x/include/mach/timex.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/timex.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h deleted file mode 100644 index af6760a50e1a..000000000000 --- a/arch/arm/mach-pxa/include/mach/timex.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/timex.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* Various drivers are still using the constant of CLOCK_TICK_RATE, for - * those drivers to at least work, the definition is provided here. - * - * NOTE: this is no longer accurate when multiple processors and boards - * are selected, newer drivers should not depend on this any more. Use - * either the clocksource/clockevent or get this at run-time by calling - * get_clock_tick_rate() (as defined in generic.c). - */ - -#if defined(CONFIG_PXA25x) -/* PXA250/210 timer base */ -#define CLOCK_TICK_RATE 3686400 -#elif defined(CONFIG_PXA27x) -/* PXA27x timer base */ -#ifdef CONFIG_MACH_MAINSTONE -#define CLOCK_TICK_RATE 3249600 -#else -#define CLOCK_TICK_RATE 3250000 -#endif -#else -#define CLOCK_TICK_RATE 3250000 -#endif diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h deleted file mode 100644 index 4eeb069373c2..000000000000 --- a/arch/arm/mach-realview/include/mach/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/timex.h - * - * RealView architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h deleted file mode 100644 index dd75e7387bbe..000000000000 --- a/arch/arm/mach-rpc/include/mach/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-rpc/include/mach/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * RiscPC architecture timex specifications - */ - -/* - * On the RiscPC, the clock ticks at 2MHz. - */ -#define CLOCK_TICK_RATE 2000000 - diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c index 9a6def14df01..99363ae5cac7 100644 --- a/arch/arm/mach-rpc/time.c +++ b/arch/arm/mach-rpc/time.c @@ -24,6 +24,9 @@ #include <asm/mach/time.h> +#define RPC_CLOCK_FREQ 2000000 +#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ) + static u32 ioc_timer_gettimeoffset(void) { unsigned int count1, count2, status; @@ -46,23 +49,23 @@ static u32 ioc_timer_gettimeoffset(void) * and count2. */ if (status & (1 << 5)) - offset -= LATCH; + offset -= RPC_LATCH; } else if (count2 > count1) { /* * We have just had another interrupt between reading * count1 and count2. */ - offset -= LATCH; + offset -= RPC_LATCH; } - offset = (LATCH - offset) * (tick_nsec / 1000); - return ((offset + LATCH/2) / LATCH) * 1000; + offset = (RPC_LATCH - offset) * (tick_nsec / 1000); + return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000; } void __init ioctime_init(void) { - ioc_writeb(LATCH & 255, IOC_T0LTCHL); - ioc_writeb(LATCH >> 8, IOC_T0LTCHH); + ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL); + ioc_writeb(RPC_LATCH >> 8, IOC_T0LTCHH); ioc_writeb(0, IOC_T0GO); } diff --git a/arch/arm/mach-s3c24xx/include/mach/timex.h b/arch/arm/mach-s3c24xx/include/mach/timex.h deleted file mode 100644 index fe9ca1ffd51b..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h deleted file mode 100644 index fb2e8cd40829..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c64xx/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h deleted file mode 100644 index 4b91faa195a8..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/timex.h +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S5P64X0 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h deleted file mode 100644 index 47ffb17aff96..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h deleted file mode 100644 index 73dc85496a83..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/timex.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/timex.h - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s5p6442/include/mach/timex.h - * - * S5PV210 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h deleted file mode 100644 index 7a5d017b58b3..000000000000 --- a/arch/arm/mach-sa1100/include/mach/timex.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/timex.h - * - * SA1100 architecture timex specifications - * - * Copyright (C) 1998 - */ - -/* - * SA1100 timer - */ -#define CLOCK_TICK_RATE 3686400 diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 6fd4acb8f187..7aaac005e036 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -9,6 +9,7 @@ * */ #include <linux/init.h> +#include <linux/kernel.h> #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -20,6 +21,9 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#define SA1100_CLOCK_FREQ 3686400 +#define SA1100_LATCH DIV_ROUND_CLOSEST(SA1100_CLOCK_FREQ, HZ) + static u64 notrace sa1100_read_sched_clock(void) { return readl_relaxed(OSCR); @@ -93,7 +97,7 @@ static void sa1100_timer_resume(struct clock_event_device *cedev) /* * OSMR0 is the system timer: make sure OSCR is sufficiently behind */ - writel_relaxed(OSMR0 - LATCH, OSCR); + writel_relaxed(OSMR0 - SA1100_LATCH, OSCR); } #else #define sa1100_timer_suspend NULL @@ -128,7 +132,7 @@ void __init sa1100_timer_init(void) setup_irq(IRQ_OST0, &sa1100_timer_irq); - clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32, + clocksource_mmio_init(OSCR, "oscr", SA1100_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up); clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400, MIN_OSCR_DELTA * 2, 0x7fffffff); diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h deleted file mode 100644 index ae0d8d825c23..000000000000 --- a/arch/arm/mach-shmobile/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_MACH_TIMEX_H -#define __ASM_MACH_TIMEX_H - -#define CLOCK_TICK_RATE 1193180 /* unused i8253 PIT value */ - -#endif /* __ASM_MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear/include/mach/timex.h b/arch/arm/mach-spear/include/mach/timex.h deleted file mode 100644 index ef95e5b780bd..000000000000 --- a/arch/arm/mach-spear/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/timex.h - * - * SPEAr platform specific timex definitions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_TIMEX_H -#define __PLAT_TIMEX_H - -#define CLOCK_TICK_RATE 48000000 - -#endif /* __PLAT_TIMEX_H */ diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h deleted file mode 100644 index 426199b1add5..000000000000 --- a/arch/arm/mach-versatile/include/mach/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/timex.h - * - * Versatile architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-w90x900/include/mach/timex.h b/arch/arm/mach-w90x900/include/mach/timex.h deleted file mode 100644 index 164dce0b64db..000000000000 --- a/arch/arm/mach-w90x900/include/mach/timex.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/timex.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/timex.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE Now, I don't use it. */ - -#define CLOCK_TICK_RATE 15000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/plat-omap/include/plat/timex.h b/arch/arm/plat-omap/include/plat/timex.h deleted file mode 100644 index e27d2daa7790..000000000000 --- a/arch/arm/plat-omap/include/plat/timex.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/timex.h - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#if !defined(__ASM_ARCH_OMAP_TIMEX_H) -#define __ASM_ARCH_OMAP_TIMEX_H - -#define CLOCK_TICK_RATE (HZ * 100000UL) - -#endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c index 09a17d9a6594..b52e1c078b99 100644 --- a/drivers/clocksource/timer-marco.c +++ b/drivers/clocksource/timer-marco.c @@ -19,7 +19,8 @@ #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/sched_clock.h> -#include <asm/mach/time.h> + +#define MARCO_CLOCK_FREQ 1000000 #define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000 #define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004 @@ -191,7 +192,7 @@ static int sirfsoc_local_timer_setup(struct clock_event_device *ce) ce->rating = 200; ce->set_mode = sirfsoc_timer_set_mode; ce->set_next_event = sirfsoc_timer_set_next_event; - clockevents_calc_mult_shift(ce, CLOCK_TICK_RATE, 60); + clockevents_calc_mult_shift(ce, MARCO_CLOCK_FREQ, 60); ce->max_delta_ns = clockevent_delta2ns(-2, ce); ce->min_delta_ns = clockevent_delta2ns(2, ce); ce->cpumask = cpumask_of(cpu); @@ -263,11 +264,11 @@ static void __init sirfsoc_marco_timer_init(void) BUG_ON(IS_ERR(clk)); rate = clk_get_rate(clk); - BUG_ON(rate < CLOCK_TICK_RATE); - BUG_ON(rate % CLOCK_TICK_RATE); + BUG_ON(rate < MARCO_CLOCK_FREQ); + BUG_ON(rate % MARCO_CLOCK_FREQ); /* Initialize the timer dividers */ - timer_div = rate / CLOCK_TICK_RATE - 1; + timer_div = rate / MARCO_CLOCK_FREQ - 1; writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL); writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL); @@ -283,7 +284,7 @@ static void __init sirfsoc_marco_timer_init(void) /* Clear all interrupts */ writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); + BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, MARCO_CLOCK_FREQ)); sirfsoc_clockevent_init(); } diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c index 8a492d34ff9f..1a6b2d6356d6 100644 --- a/drivers/clocksource/timer-prima2.c +++ b/drivers/clocksource/timer-prima2.c @@ -21,6 +21,8 @@ #include <linux/sched_clock.h> #include <asm/mach/time.h> +#define PRIMA2_CLOCK_FREQ 1000000 + #define SIRFSOC_TIMER_COUNTER_LO 0x0000 #define SIRFSOC_TIMER_COUNTER_HI 0x0004 #define SIRFSOC_TIMER_MATCH_0 0x0008 @@ -173,7 +175,7 @@ static u64 notrace sirfsoc_read_sched_clock(void) static void __init sirfsoc_clockevent_init(void) { sirfsoc_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE, + clockevents_config_and_register(&sirfsoc_clockevent, PRIMA2_CLOCK_FREQ, 2, -2); } @@ -190,8 +192,8 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) rate = clk_get_rate(clk); - BUG_ON(rate < CLOCK_TICK_RATE); - BUG_ON(rate % CLOCK_TICK_RATE); + BUG_ON(rate < PRIMA2_CLOCK_FREQ); + BUG_ON(rate % PRIMA2_CLOCK_FREQ); sirfsoc_timer_base = of_iomap(np, 0); if (!sirfsoc_timer_base) @@ -199,14 +201,16 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0); - writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV); + writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1, + sirfsoc_timer_base + SIRFSOC_TIMER_DIV); writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); + BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, + PRIMA2_CLOCK_FREQ)); - sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE); + sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ); BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c index 17ccba88d636..ed8e5e8449d3 100644 --- a/drivers/input/misc/ixp4xx-beeper.c +++ b/drivers/input/misc/ixp4xx-beeper.c @@ -67,7 +67,7 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned } if (value > 20 && value < 32767) - count = (IXP4XX_TIMER_FREQ / (value * 4)) - 1; + count = (ixp4xx_timer_freq / (value * 4)) - 1; ixp4xx_spkr_control(pin, count); diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 309b8b342d9c..596374304532 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -24,7 +24,7 @@ #include <mach/at91_rtt.h> #include <mach/cpu.h> - +#include <mach/hardware.h> /* * This driver uses two configurable hardware resources that live in the diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c index a355f2b82bb8..cccbf9d89729 100644 --- a/drivers/rtc/rtc-pxa.c +++ b/drivers/rtc/rtc-pxa.c @@ -32,7 +32,6 @@ #include <mach/hardware.h> -#define TIMER_FREQ CLOCK_TICK_RATE #define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 #define MAXFREQ_PERIODIC 1000 diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index a49f10d269b2..91c0d8839570 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -35,21 +35,18 @@ #include <linux/platform_device.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/dma-mapping.h> #include <linux/atmel_pdc.h> #include <linux/atmel_serial.h> #include <linux/uaccess.h> #include <linux/platform_data/atmel.h> #include <linux/timer.h> +#include <linux/gpio.h> #include <asm/io.h> #include <asm/ioctls.h> -#ifdef CONFIG_ARM -#include <mach/cpu.h> -#include <asm/gpio.h> -#endif - #define PDC_BUFFER_SIZE 512 /* Revisit: We should calculate this based on the actual port settings */ #define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ @@ -168,6 +165,7 @@ struct atmel_uart_port { struct circ_buf rx_ring; struct serial_rs485 rs485; /* rs485 settings */ + int rts_gpio; /* optional RTS GPIO */ unsigned int tx_done_mask; bool is_usart; /* usart or uart */ struct timer_list uart_timer; /* uart timer */ @@ -301,20 +299,16 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) unsigned int mode; struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); -#ifdef CONFIG_ARCH_AT91RM9200 - if (cpu_is_at91rm9200()) { - /* - * AT91RM9200 Errata #39: RTS0 is not internally connected - * to PA21. We need to drive the pin manually. - */ - if (port->mapbase == AT91RM9200_BASE_US0) { - if (mctrl & TIOCM_RTS) - at91_set_gpio_value(AT91_PIN_PA21, 0); - else - at91_set_gpio_value(AT91_PIN_PA21, 1); - } + /* + * AT91RM9200 Errata #39: RTS0 is not internally connected + * to PA21. We need to drive the pin as a GPIO. + */ + if (gpio_is_valid(atmel_port->rts_gpio)) { + if (mctrl & TIOCM_RTS) + gpio_set_value(atmel_port->rts_gpio, 0); + else + gpio_set_value(atmel_port->rts_gpio, 1); } -#endif if (mctrl & TIOCM_RTS) control |= ATMEL_US_RTSEN; @@ -2389,6 +2383,25 @@ static int atmel_serial_probe(struct platform_device *pdev) port = &atmel_ports[ret]; port->backup_imr = 0; port->uart.line = ret; + port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */ + if (pdata) + port->rts_gpio = pdata->rts_gpio; + else if (np) + port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0); + + if (gpio_is_valid(port->rts_gpio)) { + ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS"); + if (ret) { + dev_err(&pdev->dev, "error requesting RTS GPIO\n"); + goto err; + } + /* Default to 1 as RTS is active low */ + ret = gpio_direction_output(port->rts_gpio, 1); + if (ret) { + dev_err(&pdev->dev, "error setting up RTS GPIO\n"); + goto err; + } + } ret = atmel_init_port(port, pdev); if (ret) diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index cea9f70133c5..e26b0c14edea 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -84,6 +84,7 @@ struct atmel_uart_data { short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virt. base address, if any */ struct serial_rs485 rs485; /* rs485 settings */ + int rts_gpio; /* optional RTS GPIO */ }; /* Touchscreen Controller */ |