diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-10-14 11:41:28 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-10-14 11:41:28 -0700 |
commit | f96ed2612260a8a415512eed4fe3f5c77247d4a1 (patch) | |
tree | 93198ef77d193b675f88f57a906525face31ed5c | |
parent | b56061b04e0264f3b24f7450a3d5790437bb912a (diff) | |
parent | 1ce788d24268a33513d832d9030ceab93f1c2ce2 (diff) | |
download | linux-f96ed2612260a8a415512eed4fe3f5c77247d4a1.tar.bz2 |
Merge branch 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
- Write same support added
- Minor ahci MSIX irq handling updates
- Non-critical SCSI command translation fixes
- Controller specific changes
* 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
libata: remove <asm-generic/libata-portmap.h>
libata: remove unused definitions from <asm/libata-portmap.h>
pata_at91: Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
ata: Replace BUG() with BUG_ON().
ata: sata_mv: Replacing dma_pool_alloc and memset with a single call dma_pool_zalloc.
libata: Some drives failing on SCT Write Same
ahci: use pci_alloc_irq_vectors
libata: SCT Write Same handle ATA_DFLAG_PIO
libata: SCT Write Same / DSM Trim
libata: Add support for SCT Write Same
libata: Safely overwrite attached page in WRITE SAME xlat
ahci: also use a per-port lock for the multi-MSIX case
ARM: dts: STiH407-family: Add ports-implemented property in sata nodes
ahci: st: Add ports-implemented property in support
ahci: qoriq: enable snoopable sata read and write
ahci: qoriq: adjust sata parameter
libata-scsi: fix MODE SELECT translation for Control mode page
libata-scsi: use u8 array to store mode page copy
-rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 | ||||
-rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 2 | ||||
-rw-r--r-- | arch/ia64/include/asm/libata-portmap.h | 4 | ||||
-rw-r--r-- | arch/powerpc/include/asm/libata-portmap.h | 4 | ||||
-rw-r--r-- | drivers/ata/ahci.c | 149 | ||||
-rw-r--r-- | drivers/ata/ahci.h | 24 | ||||
-rw-r--r-- | drivers/ata/ahci_qoriq.c | 20 | ||||
-rw-r--r-- | drivers/ata/ahci_st.c | 4 | ||||
-rw-r--r-- | drivers/ata/libahci.c | 9 | ||||
-rw-r--r-- | drivers/ata/libata-scsi.c | 288 | ||||
-rw-r--r-- | drivers/ata/pata_at91.c | 4 | ||||
-rw-r--r-- | drivers/ata/pata_octeon_cf.c | 3 | ||||
-rw-r--r-- | drivers/ata/sata_mv.c | 6 | ||||
-rw-r--r-- | include/asm-generic/libata-portmap.h | 7 | ||||
-rw-r--r-- | include/linux/ata.h | 69 | ||||
-rw-r--r-- | include/linux/libata.h | 3 |
16 files changed, 361 insertions, 238 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 58635f7f4668..220ac7057d12 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -502,10 +502,11 @@ }; sata: sata@3200000 { - compatible = "fsl,ls1043a-ahci", "fsl,ls1021a-ahci"; + compatible = "fsl,ls1043a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>; interrupts = <0 69 0x4>; clocks = <&clockgen 4 0>; + dma-coherent; }; msi1: msi-controller1@1571000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index d1059765dfee..337da90bd7da 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -683,6 +683,7 @@ reg = <0x0 0x3200000 0x0 0x10000>; interrupts = <0 133 0x4>; /* Level high type */ clocks = <&clockgen 4 3>; + dma-coherent; }; sata1: sata@3210000 { @@ -691,6 +692,7 @@ reg = <0x0 0x3210000 0x0 0x10000>; interrupts = <0 136 0x4>; /* Level high type */ clocks = <&clockgen 4 3>; + dma-coherent; }; usb0: usb3@3100000 { diff --git a/arch/ia64/include/asm/libata-portmap.h b/arch/ia64/include/asm/libata-portmap.h index 0e00c9a9f410..7a1f8310596b 100644 --- a/arch/ia64/include/asm/libata-portmap.h +++ b/arch/ia64/include/asm/libata-portmap.h @@ -1,12 +1,8 @@ #ifndef __ASM_IA64_LIBATA_PORTMAP_H #define __ASM_IA64_LIBATA_PORTMAP_H -#define ATA_PRIMARY_CMD 0x1F0 -#define ATA_PRIMARY_CTL 0x3F6 #define ATA_PRIMARY_IRQ(dev) isa_irq_to_vector(14) -#define ATA_SECONDARY_CMD 0x170 -#define ATA_SECONDARY_CTL 0x376 #define ATA_SECONDARY_IRQ(dev) isa_irq_to_vector(15) #endif diff --git a/arch/powerpc/include/asm/libata-portmap.h b/arch/powerpc/include/asm/libata-portmap.h index 4d8518049f4d..4396db57b8be 100644 --- a/arch/powerpc/include/asm/libata-portmap.h +++ b/arch/powerpc/include/asm/libata-portmap.h @@ -1,12 +1,8 @@ #ifndef __ASM_POWERPC_LIBATA_PORTMAP_H #define __ASM_POWERPC_LIBATA_PORTMAP_H -#define ATA_PRIMARY_CMD 0x1F0 -#define ATA_PRIMARY_CTL 0x3F6 #define ATA_PRIMARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 0) -#define ATA_SECONDARY_CMD 0x170 -#define ATA_SECONDARY_CTL 0x376 #define ATA_SECONDARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 1) #endif diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 90eabaf81215..ba5f11cebee2 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1400,142 +1400,56 @@ static irqreturn_t ahci_thunderx_irq_handler(int irq, void *dev_instance) } #endif -/* - * ahci_init_msix() - optionally enable per-port MSI-X otherwise defer - * to single msi. - */ -static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports, - struct ahci_host_priv *hpriv, unsigned long flags) +static int ahci_get_irq_vector(struct ata_host *host, int port) { - int nvec, i, rc; - - /* Do not init MSI-X if MSI is disabled for the device */ - if (hpriv->flags & AHCI_HFLAG_NO_MSI) - return -ENODEV; - - nvec = pci_msix_vec_count(pdev); - if (nvec < 0) - return nvec; - - /* - * Proper MSI-X implementations will have a vector per-port. - * Barring that, we prefer single-MSI over single-MSIX. If this - * check fails (not enough MSI-X vectors for all ports) we will - * be called again with the flag clear iff ahci_init_msi() - * fails. - */ - if (flags & AHCI_HFLAG_MULTI_MSIX) { - if (nvec < n_ports) - return -ENODEV; - nvec = n_ports; - } else if (nvec) { - nvec = 1; - } else { - /* - * Emit dev_err() since this was the non-legacy irq - * method of last resort. - */ - rc = -ENODEV; - goto fail; - } - - for (i = 0; i < nvec; i++) - hpriv->msix[i].entry = i; - rc = pci_enable_msix_exact(pdev, hpriv->msix, nvec); - if (rc < 0) - goto fail; - - if (nvec > 1) - hpriv->flags |= AHCI_HFLAG_MULTI_MSIX; - hpriv->irq = hpriv->msix[0].vector; /* for single msi-x */ - - return nvec; -fail: - dev_err(&pdev->dev, - "failed to enable MSI-X with error %d, # of vectors: %d\n", - rc, nvec); - - return rc; + return pci_irq_vector(to_pci_dev(host->dev), port); } static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports, struct ahci_host_priv *hpriv) { - int rc, nvec; + int nvec; if (hpriv->flags & AHCI_HFLAG_NO_MSI) return -ENODEV; - nvec = pci_msi_vec_count(pdev); - if (nvec < 0) - return nvec; - /* * If number of MSIs is less than number of ports then Sharing Last * Message mode could be enforced. In this case assume that advantage * of multipe MSIs is negated and use single MSI mode instead. */ - if (nvec < n_ports) - goto single_msi; - - rc = pci_enable_msi_exact(pdev, nvec); - if (rc == -ENOSPC) - goto single_msi; - if (rc < 0) - return rc; + nvec = pci_alloc_irq_vectors(pdev, n_ports, INT_MAX, + PCI_IRQ_MSIX | PCI_IRQ_MSI); + if (nvec > 0) { + if (!(readl(hpriv->mmio + HOST_CTL) & HOST_MRSM)) { + hpriv->get_irq_vector = ahci_get_irq_vector; + hpriv->flags |= AHCI_HFLAG_MULTI_MSI; + return nvec; + } - /* fallback to single MSI mode if the controller enforced MRSM mode */ - if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) { - pci_disable_msi(pdev); + /* + * Fallback to single MSI mode if the controller enforced MRSM + * mode. + */ printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n"); - goto single_msi; + pci_free_irq_vectors(pdev); } - if (nvec > 1) - hpriv->flags |= AHCI_HFLAG_MULTI_MSI; - - goto out; - -single_msi: - nvec = 1; - - rc = pci_enable_msi(pdev); - if (rc < 0) - return rc; -out: - hpriv->irq = pdev->irq; - - return nvec; -} - -static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, - struct ahci_host_priv *hpriv) -{ - int nvec; - /* - * Try to enable per-port MSI-X. If the host is not capable - * fall back to single MSI before finally attempting single - * MSI-X. + * -ENOSPC indicated we don't have enough vectors. Don't bother trying + * a single vectors for any other error: */ - nvec = ahci_init_msix(pdev, n_ports, hpriv, AHCI_HFLAG_MULTI_MSIX); - if (nvec >= 0) + if (nvec < 0 && nvec != -ENOSPC) return nvec; - nvec = ahci_init_msi(pdev, n_ports, hpriv); - if (nvec >= 0) - return nvec; - - /* try single-msix */ - nvec = ahci_init_msix(pdev, n_ports, hpriv, 0); - if (nvec >= 0) + /* + * If the host is not capable of supporting per-port vectors, fall + * back to single MSI before finally attempting single MSI-X. + */ + nvec = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); + if (nvec == 1) return nvec; - - /* legacy intx interrupts */ - pci_intx(pdev, 1); - hpriv->irq = pdev->irq; - - return 0; + return pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX); } static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -1698,11 +1612,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!host) return -ENOMEM; host->private_data = hpriv; - hpriv->msix = devm_kzalloc(&pdev->dev, - sizeof(struct msix_entry) * n_ports, GFP_KERNEL); - if (!hpriv->msix) - return -ENOMEM; - ahci_init_interrupts(pdev, n_ports, hpriv); + + if (ahci_init_msi(pdev, n_ports, hpriv) < 0) { + /* legacy intx interrupts */ + pci_intx(pdev, 1); + } + hpriv->irq = pdev->irq; if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) host->flags |= ATA_HOST_PARALLEL_SCAN; diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 70b06bcfb7e3..0cc08f892fea 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -242,12 +242,10 @@ enum { AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */ #ifdef CONFIG_PCI_MSI - AHCI_HFLAG_MULTI_MSI = (1 << 20), /* multiple PCI MSIs */ - AHCI_HFLAG_MULTI_MSIX = (1 << 21), /* per-port MSI-X */ + AHCI_HFLAG_MULTI_MSI = (1 << 20), /* per-port MSI(-X) */ #else /* compile out MSI infrastructure */ AHCI_HFLAG_MULTI_MSI = 0, - AHCI_HFLAG_MULTI_MSIX = 0, #endif AHCI_HFLAG_WAKE_BEFORE_STOP = (1 << 22), /* wake before DMA stop */ @@ -351,7 +349,6 @@ struct ahci_host_priv { * the PHY position in this array. */ struct phy **phys; - struct msix_entry *msix; /* Optional MSI-X support */ unsigned nports; /* Number of ports */ void *plat_data; /* Other platform data */ unsigned int irq; /* interrupt line */ @@ -362,22 +359,11 @@ struct ahci_host_priv { */ void (*start_engine)(struct ata_port *ap); irqreturn_t (*irq_handler)(int irq, void *dev_instance); -}; -#ifdef CONFIG_PCI_MSI -static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port) -{ - if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX) - return hpriv->msix[port].vector; - else - return hpriv->irq + port; -} -#else -static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port) -{ - return hpriv->irq; -} -#endif + /* only required for per-port MSI(-X) support */ + int (*get_irq_vector)(struct ata_host *host, + int port); +}; extern int ahci_ignore_sss; diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c index 7bdee9bd8786..1eba8dff875e 100644 --- a/drivers/ata/ahci_qoriq.c +++ b/drivers/ata/ahci_qoriq.c @@ -30,24 +30,23 @@ #define PORT_PHY3 0xB0 #define PORT_PHY4 0xB4 #define PORT_PHY5 0xB8 +#define PORT_AXICC 0xBC #define PORT_TRANS 0xC8 /* port register default value */ #define AHCI_PORT_PHY_1_CFG 0xa003fffe #define AHCI_PORT_TRANS_CFG 0x08000029 +#define AHCI_PORT_AXICC_CFG 0x3fffffff /* for ls1021a */ #define LS1021A_PORT_PHY2 0x28183414 #define LS1021A_PORT_PHY3 0x0e080e06 #define LS1021A_PORT_PHY4 0x064a080b #define LS1021A_PORT_PHY5 0x2aa86470 +#define LS1021A_AXICC_ADDR 0xC0 #define SATA_ECC_DISABLE 0x00020000 -/* for ls1043a */ -#define LS1043A_PORT_PHY2 0x28184d1f -#define LS1043A_PORT_PHY3 0x0e081509 - enum ahci_qoriq_type { AHCI_LS1021A, AHCI_LS1043A, @@ -137,7 +136,7 @@ static struct ata_port_operations ahci_qoriq_ops = { .hardreset = ahci_qoriq_hardreset, }; -static struct ata_port_info ahci_qoriq_port_info = { +static const struct ata_port_info ahci_qoriq_port_info = { .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, @@ -162,18 +161,19 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4); writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); + writel(AHCI_PORT_AXICC_CFG, reg_base + LS1021A_AXICC_ADDR); break; case AHCI_LS1043A: writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); - writel(LS1043A_PORT_PHY2, reg_base + PORT_PHY2); - writel(LS1043A_PORT_PHY3, reg_base + PORT_PHY3); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); + writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); break; case AHCI_LS2080A: writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); + writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); break; } @@ -221,12 +221,6 @@ static int ahci_qoriq_probe(struct platform_device *pdev) if (rc) goto disable_resources; - /* Workaround for ls2080a */ - if (qoriq_priv->type == AHCI_LS2080A) { - hpriv->flags |= AHCI_HFLAG_NO_NCQ; - ahci_qoriq_port_info.flags &= ~ATA_FLAG_NCQ; - } - rc = ahci_platform_init_host(pdev, hpriv, &ahci_qoriq_port_info, &ahci_qoriq_sht); if (rc) diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c index 8ff428fe8e0f..bc345f249555 100644 --- a/drivers/ata/ahci_st.c +++ b/drivers/ata/ahci_st.c @@ -147,6 +147,7 @@ static struct scsi_host_template ahci_platform_sht = { static int st_ahci_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct st_ahci_drv_data *drv_data; struct ahci_host_priv *hpriv; int err; @@ -170,6 +171,9 @@ static int st_ahci_probe(struct platform_device *pdev) st_ahci_configure_oob(hpriv->mmio); + of_property_read_u32(dev->of_node, + "ports-implemented", &hpriv->force_port_map); + err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info, &ahci_platform_sht); if (err) { diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index dcf2c724fd06..0d028ead99e8 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -2520,7 +2520,7 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, */ for (i = 0; i < host->n_ports; i++) { struct ahci_port_priv *pp = host->ports[i]->private_data; - int irq = ahci_irq_vector(hpriv, i); + int irq = hpriv->get_irq_vector(host, i); /* Do not receive interrupts sent by dummy ports */ if (!pp) { @@ -2556,10 +2556,15 @@ int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht) int irq = hpriv->irq; int rc; - if (hpriv->flags & (AHCI_HFLAG_MULTI_MSI | AHCI_HFLAG_MULTI_MSIX)) { + if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) { if (hpriv->irq_handler) dev_warn(host->dev, "both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented\n"); + if (!hpriv->get_irq_vector) { + dev_err(host->dev, + "AHCI_HFLAG_MULTI_MSI requires ->get_irq_vector!\n"); + return -EIO; + } rc = ahci_host_activate_multi_irqs(host, sht); } else { diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index e207b33e4ce9..9cceb4a875a5 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1159,8 +1159,6 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev) { sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; - sdev->no_report_opcodes = 1; - sdev->no_write_same = 1; /* Schedule policy is determined by ->qc_defer() callback and * it needs to see every deferred qc. Set dev_blocked to 1 to @@ -3282,18 +3280,125 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) return 1; } +/** + * ata_format_dsm_trim_descr() - SATL Write Same to DSM Trim + * @cmd: SCSI command being translated + * @trmax: Maximum number of entries that will fit in sector_size bytes. + * @sector: Starting sector + * @count: Total Range of request in logical sectors + * + * Rewrite the WRITE SAME descriptor to be a DSM TRIM little-endian formatted + * descriptor. + * + * Upto 64 entries of the format: + * 63:48 Range Length + * 47:0 LBA + * + * Range Length of 0 is ignored. + * LBA's should be sorted order and not overlap. + * + * NOTE: this is the same format as ADD LBA(S) TO NV CACHE PINNED SET + * + * Return: Number of bytes copied into sglist. + */ +static size_t ata_format_dsm_trim_descr(struct scsi_cmnd *cmd, u32 trmax, + u64 sector, u32 count) +{ + struct scsi_device *sdp = cmd->device; + size_t len = sdp->sector_size; + size_t r; + __le64 *buf; + u32 i = 0; + unsigned long flags; + + WARN_ON(len > ATA_SCSI_RBUF_SIZE); + + if (len > ATA_SCSI_RBUF_SIZE) + len = ATA_SCSI_RBUF_SIZE; + + spin_lock_irqsave(&ata_scsi_rbuf_lock, flags); + buf = ((void *)ata_scsi_rbuf); + memset(buf, 0, len); + while (i < trmax) { + u64 entry = sector | + ((u64)(count > 0xffff ? 0xffff : count) << 48); + buf[i++] = __cpu_to_le64(entry); + if (count <= 0xffff) + break; + count -= 0xffff; + sector += 0xffff; + } + r = sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, len); + spin_unlock_irqrestore(&ata_scsi_rbuf_lock, flags); + + return r; +} + +/** + * ata_format_dsm_trim_descr() - SATL Write Same to ATA SCT Write Same + * @cmd: SCSI command being translated + * @lba: Starting sector + * @num: Number of sectors to be zero'd. + * + * Rewrite the WRITE SAME payload to be an SCT Write Same formatted + * descriptor. + * NOTE: Writes a pattern (0's) in the foreground. + * + * Return: Number of bytes copied into sglist. + */ +static size_t ata_format_sct_write_same(struct scsi_cmnd *cmd, u64 lba, u64 num) +{ + struct scsi_device *sdp = cmd->device; + size_t len = sdp->sector_size; + size_t r; + u16 *buf; + unsigned long flags; + + spin_lock_irqsave(&ata_scsi_rbuf_lock, flags); + buf = ((void *)ata_scsi_rbuf); + + put_unaligned_le16(0x0002, &buf[0]); /* SCT_ACT_WRITE_SAME */ + put_unaligned_le16(0x0101, &buf[1]); /* WRITE PTRN FG */ + put_unaligned_le64(lba, &buf[2]); + put_unaligned_le64(num, &buf[6]); + put_unaligned_le32(0u, &buf[10]); /* pattern */ + + WARN_ON(len > ATA_SCSI_RBUF_SIZE); + + if (len > ATA_SCSI_RBUF_SIZE) + len = ATA_SCSI_RBUF_SIZE; + + r = sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, len); + spin_unlock_irqrestore(&ata_scsi_rbuf_lock, flags); + + return r; +} + +/** + * ata_scsi_write_same_xlat() - SATL Write Same to ATA SCT Write Same + * @qc: Command to be translated + * + * Translate a SCSI WRITE SAME command to be either a DSM TRIM command or + * an SCT Write Same command. + * Based on WRITE SAME has the UNMAP flag + * When set translate to DSM TRIM + * When clear translate to SCT Write Same + */ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) { struct ata_taskfile *tf = &qc->tf; struct scsi_cmnd *scmd = qc->scsicmd; + struct scsi_device *sdp = scmd->device; + size_t len = sdp->sector_size; struct ata_device *dev = qc->dev; const u8 *cdb = scmd->cmnd; u64 block; u32 n_block; + const u32 trmax = len >> 3; u32 size; - void *buf; u16 fp; u8 bp = 0xff; + u8 unmap = cdb[1] & 0x8; /* we may not issue DMA commands if no DMA mode is set */ if (unlikely(!dev->dma_mode)) @@ -3305,11 +3410,26 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) } scsi_16_lba_len(cdb, &block, &n_block); - /* for now we only support WRITE SAME with the unmap bit set */ - if (unlikely(!(cdb[1] & 0x8))) { - fp = 1; - bp = 3; - goto invalid_fld; + if (unmap) { + /* If trim is not enabled the cmd is invalid. */ + if ((dev->horkage & ATA_HORKAGE_NOTRIM) || + !ata_id_has_trim(dev->id)) { + fp = 1; + bp = 3; + goto invalid_fld; + } + /* If the request is too large the cmd is invalid */ + if (n_block > 0xffff * trmax) { + fp = 2; + goto invalid_fld; + } + } else { + /* If write same is not available the cmd is invalid */ + if (!ata_id_sct_write_same(dev->id)) { + fp = 1; + bp = 3; + goto invalid_fld; + } } /* @@ -3319,32 +3439,54 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) if (!scsi_sg_count(scmd)) goto invalid_param_len; - buf = page_address(sg_page(scsi_sglist(scmd))); - - if (n_block <= 65535 * ATA_MAX_TRIM_RNUM) { - size = ata_set_lba_range_entries(buf, ATA_MAX_TRIM_RNUM, block, n_block); - } else { - fp = 2; - goto invalid_fld; - } + /* + * size must match sector size in bytes + * For DATA SET MANAGEMENT TRIM in ACS-2 nsect (aka count) + * is defined as number of 512 byte blocks to be transferred. + */ + if (unmap) { + size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block); + if (size != len) + goto invalid_param_len; - if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) { - /* Newer devices support queued TRIM commands */ - tf->protocol = ATA_PROT_NCQ; - tf->command = ATA_CMD_FPDMA_SEND; - tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f; - tf->nsect = qc->tag << 3; - tf->hob_feature = (size / 512) >> 8; - tf->feature = size / 512; + if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) { + /* Newer devices support queued TRIM commands */ + tf->protocol = ATA_PROT_NCQ; + tf->command = ATA_CMD_FPDMA_SEND; + tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f; + tf->nsect = qc->tag << 3; + tf->hob_feature = (size / 512) >> 8; + tf->feature = size / 512; - tf->auxiliary = 1; + tf->auxiliary = 1; + } else { + tf->protocol = ATA_PROT_DMA; + tf->hob_feature = 0; + tf->feature = ATA_DSM_TRIM; + tf->hob_nsect = (size / 512) >> 8; + tf->nsect = size / 512; + tf->command = ATA_CMD_DSM; + } } else { - tf->protocol = ATA_PROT_DMA; + size = ata_format_sct_write_same(scmd, block, n_block); + if (size != len) + goto invalid_param_len; + tf->hob_feature = 0; - tf->feature = ATA_DSM_TRIM; - tf->hob_nsect = (size / 512) >> 8; - tf->nsect = size / 512; - tf->command = ATA_CMD_DSM; + tf->feature = 0; + tf->hob_nsect = 0; + tf->nsect = 1; + tf->lbah = 0; + tf->lbam = 0; + tf->lbal = ATA_CMD_STANDBYNOW1; + tf->hob_lbah = 0; + tf->hob_lbam = 0; + tf->hob_lbal = 0; + tf->device = ATA_CMD_STANDBYNOW1; + tf->protocol = ATA_PROT_DMA; + tf->command = ATA_CMD_WRITE_LOG_DMA_EXT; + if (unlikely(dev->flags & ATA_DFLAG_PIO)) + tf->command = ATA_CMD_WRITE_LOG_EXT; } tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | @@ -3368,6 +3510,76 @@ invalid_opcode: } /** + * ata_scsiop_maint_in - Simulate a subset of MAINTENANCE_IN + * @args: device MAINTENANCE_IN data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * + * Yields a subset to satisfy scsi_report_opcode() + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static unsigned int ata_scsiop_maint_in(struct ata_scsi_args *args, u8 *rbuf) +{ + struct ata_device *dev = args->dev; + u8 *cdb = args->cmd->cmnd; + u8 supported = 0; + unsigned int err = 0; + + if (cdb[2] != 1) { + ata_dev_warn(dev, "invalid command format %d\n", cdb[2]); + err = 2; + goto out; + } + switch (cdb[3]) { + case INQUIRY: + case MODE_SENSE: + case MODE_SENSE_10: + case READ_CAPACITY: + case SERVICE_ACTION_IN_16: + case REPORT_LUNS: + case REQUEST_SENSE: + case SYNCHRONIZE_CACHE: + case REZERO_UNIT: + case SEEK_6: + case SEEK_10: + case TEST_UNIT_READY: + case SEND_DIAGNOSTIC: + case MAINTENANCE_IN: + case READ_6: + case READ_10: + case READ_16: + case WRITE_6: + case WRITE_10: + case WRITE_16: + case ATA_12: + case ATA_16: + case VERIFY: + case VERIFY_16: + case MODE_SELECT: + case MODE_SELECT_10: + case START_STOP: + supported = 3; + break; + case WRITE_SAME_16: + if (!ata_id_sct_write_same(dev->id)) + break; + /* fallthrough: if SCT ... only enable for ZBC */ + case ZBC_IN: + case ZBC_OUT: + if (ata_id_zoned_cap(dev->id) || + dev->class == ATA_DEV_ZAC) + supported = 3; + break; + default: + break; + } +out: + rbuf[1] = supported; /* supported */ + return err; +} + +/** * ata_scsi_report_zones_complete - convert ATA output * @qc: command structure returning the data * @@ -3610,7 +3822,7 @@ static int ata_mselect_caching(struct ata_queued_cmd *qc, { struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; - char mpage[CACHE_MPAGE_LEN]; + u8 mpage[CACHE_MPAGE_LEN]; u8 wce; int i; @@ -3666,7 +3878,7 @@ static int ata_mselect_control(struct ata_queued_cmd *qc, const u8 *buf, int len, u16 *fp) { struct ata_device *dev = qc->dev; - char mpage[CONTROL_MPAGE_LEN]; + u8 mpage[CONTROL_MPAGE_LEN]; u8 d_sense; int i; @@ -3701,8 +3913,6 @@ static int ata_mselect_control(struct ata_queued_cmd *qc, dev->flags |= ATA_DFLAG_D_SENSE; else dev->flags &= ~ATA_DFLAG_D_SENSE; - qc->scsicmd->result = SAM_STAT_GOOD; - qc->scsicmd->scsi_done(qc->scsicmd); return 0; } @@ -3829,6 +4039,8 @@ static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc) if (ata_mselect_control(qc, p, pg_len, &fp) < 0) { fp += hdr_len + bd_len; goto invalid_param; + } else { + goto skip; /* No ATA command to send */ } break; default: /* invalid page code */ @@ -4147,6 +4359,13 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd) ata_scsi_invalid_field(dev, cmd, 1); break; + case MAINTENANCE_IN: + if (scsicmd[1] == MI_REPORT_SUPPORTED_OPERATION_CODES) + ata_scsi_rbuf_fill(&args, ata_scsiop_maint_in); + else + ata_scsi_invalid_field(dev, cmd, 1); + break; + /* all other commands */ default: ata_scsi_set_sense(dev, cmd, ILLEGAL_REQUEST, 0x20, 0x0); @@ -4179,7 +4398,6 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) shost->max_lun = 1; shost->max_channel = 1; shost->max_cmd_len = 16; - shost->no_write_same = 1; /* Schedule policy is determined by ->qc_defer() * callback and it needs to see every deferred qc. diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 9f27b14009f9..1611e0e8d767 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -347,10 +347,8 @@ static int at91sam9_smc_fields_init(struct device *dev) field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC); fields.mode = devm_regmap_field_alloc(dev, smc, field); - if (IS_ERR(fields.mode)) - return PTR_ERR(fields.mode); - return 0; + return PTR_ERR_OR_ZERO(fields.mode); } static int pata_at91_probe(struct platform_device *pdev) diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c index 27245957eee3..475a00669427 100644 --- a/drivers/ata/pata_octeon_cf.c +++ b/drivers/ata/pata_octeon_cf.c @@ -152,8 +152,7 @@ static void octeon_cf_set_piomode(struct ata_port *ap, struct ata_device *dev) div = 8; T = (int)((1000000000000LL * div) / octeon_get_io_clock_rate()); - if (ata_timing_compute(dev, dev->pio_mode, &timing, T, T)) - BUG(); + BUG_ON(ata_timing_compute(dev, dev->pio_mode, &timing, T, T)); t1 = timing.setup; if (t1) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 745489a1c86a..efc48bf89d51 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1727,15 +1727,13 @@ static int mv_port_start(struct ata_port *ap) return -ENOMEM; ap->private_data = pp; - pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma); + pp->crqb = dma_pool_zalloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma); if (!pp->crqb) return -ENOMEM; - memset(pp->crqb, 0, MV_CRQB_Q_SZ); - pp->crpb = dma_pool_alloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma); + pp->crpb = dma_pool_zalloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma); if (!pp->crpb) goto out_port_free_dma_mem; - memset(pp->crpb, 0, MV_CRPB_Q_SZ); /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */ if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0) diff --git a/include/asm-generic/libata-portmap.h b/include/asm-generic/libata-portmap.h deleted file mode 100644 index cf14f2ff40b6..000000000000 --- a/include/asm-generic/libata-portmap.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_GENERIC_LIBATA_PORTMAP_H -#define __ASM_GENERIC_LIBATA_PORTMAP_H - -#define ATA_PRIMARY_IRQ(dev) 14 -#define ATA_SECONDARY_IRQ(dev) 15 - -#endif diff --git a/include/linux/ata.h b/include/linux/ata.h index adbc812c009b..fdb180367ba1 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -105,6 +105,7 @@ enum { ATA_ID_CFA_KEY_MGMT = 162, ATA_ID_CFA_MODES = 163, ATA_ID_DATA_SET_MGMT = 169, + ATA_ID_SCT_CMD_XPORT = 206, ATA_ID_ROT_SPEED = 217, ATA_ID_PIO4 = (1 << 1), @@ -789,6 +790,48 @@ static inline bool ata_id_sense_reporting_enabled(const u16 *id) } /** + * + * Word: 206 - SCT Command Transport + * 15:12 - Vendor Specific + * 11:6 - Reserved + * 5 - SCT Command Transport Data Tables supported + * 4 - SCT Command Transport Features Control supported + * 3 - SCT Command Transport Error Recovery Control supported + * 2 - SCT Command Transport Write Same supported + * 1 - SCT Command Transport Long Sector Access supported + * 0 - SCT Command Transport supported + */ +static inline bool ata_id_sct_data_tables(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 5) ? true : false; +} + +static inline bool ata_id_sct_features_ctrl(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 4) ? true : false; +} + +static inline bool ata_id_sct_error_recovery_ctrl(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 3) ? true : false; +} + +static inline bool ata_id_sct_write_same(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 2) ? true : false; +} + +static inline bool ata_id_sct_long_sector_access(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 1) ? true : false; +} + +static inline bool ata_id_sct_supported(const u16 *id) +{ + return id[ATA_ID_SCT_CMD_XPORT] & (1 << 0) ? true : false; +} + +/** * ata_id_major_version - get ATA level of drive * @id: Identify data * @@ -1071,32 +1114,6 @@ static inline void ata_id_to_hd_driveid(u16 *id) #endif } -/* - * Write LBA Range Entries to the buffer that will cover the extent from - * sector to sector + count. This is used for TRIM and for ADD LBA(S) - * TO NV CACHE PINNED SET. - */ -static inline unsigned ata_set_lba_range_entries(void *_buffer, - unsigned num, u64 sector, unsigned long count) -{ - __le64 *buffer = _buffer; - unsigned i = 0, used_bytes; - - while (i < num) { - u64 entry = sector | - ((u64)(count > 0xffff ? 0xffff : count) << 48); - buffer[i++] = __cpu_to_le64(entry); - if (count <= 0xffff) - break; - count -= 0xffff; - sector += 0xffff; - } - - used_bytes = ALIGN(i * 8, 512); - memset(buffer + i, 0, used_bytes - i * 8); - return used_bytes; -} - static inline bool ata_ok(u8 status) { return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR)) diff --git a/include/linux/libata.h b/include/linux/libata.h index e37d4f99f510..616eef4d81ea 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -46,7 +46,8 @@ #ifdef CONFIG_ATA_NONSTANDARD #include <asm/libata-portmap.h> #else -#include <asm-generic/libata-portmap.h> +#define ATA_PRIMARY_IRQ(dev) 14 +#define ATA_SECONDARY_IRQ(dev) 15 #endif /* |