summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorbrking@us.ibm.com <brking@us.ibm.com>2005-11-01 17:02:22 -0600
committerJames Bottomley <jejb@mulgrave.(none)>2005-11-06 13:09:47 -0600
commitee0a90fa3efffcaccffea5a9c1599f4c59ca55d4 (patch)
tree3d0ac366068cfa5c2925645634bde1a6b87538b3
parentee0f05b863df0a623792eaa46703019c100be2de (diff)
downloadlinux-ee0a90fa3efffcaccffea5a9c1599f4c59ca55d4.tar.bz2
[SCSI] ipr: Support new device queueing model
New ipr adapters support a new device queueing model in the adapter firmware. The queueing model is the NACA queueing model, but it does not mean use of NACA is required. The new model removes some of the adapter firmware queue state that made handling QERR=0 almost impossible. The queueing model on older adapters included the concept of a queue frozen state, which would freeze the response queue in the adapter when a check condition occurred, requiring a a primitive to resume the queue. The new queueing model removes this complexity. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-rw-r--r--drivers/scsi/ipr.c59
-rw-r--r--drivers/scsi/ipr.h18
2 files changed, 66 insertions, 11 deletions
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index cca4972735be..2f84f26624bf 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -814,7 +814,7 @@ static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type,
**/
static void ipr_init_res_entry(struct ipr_resource_entry *res)
{
- res->needs_sync_complete = 1;
+ res->needs_sync_complete = 0;
res->in_erp = 0;
res->add_to_ml = 0;
res->del_from_ml = 0;
@@ -3251,7 +3251,8 @@ static int ipr_slave_alloc(struct scsi_device *sdev)
res->add_to_ml = 0;
res->in_erp = 0;
sdev->hostdata = res;
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
rc = 0;
break;
}
@@ -3515,7 +3516,8 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd)
}
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
LEAVE;
return (IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS);
@@ -3819,7 +3821,8 @@ static void ipr_erp_done(struct ipr_cmnd *ipr_cmd)
}
if (res) {
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
res->in_erp = 0;
}
ipr_unmap_sglist(ioa_cfg, ipr_cmd);
@@ -4089,6 +4092,30 @@ static void ipr_gen_sense(struct ipr_cmnd *ipr_cmd)
}
/**
+ * ipr_get_autosense - Copy autosense data to sense buffer
+ * @ipr_cmd: ipr command struct
+ *
+ * This function copies the autosense buffer to the buffer
+ * in the scsi_cmd, if there is autosense available.
+ *
+ * Return value:
+ * 1 if autosense was available / 0 if not
+ **/
+static int ipr_get_autosense(struct ipr_cmnd *ipr_cmd)
+{
+ struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
+
+ if ((be32_to_cpu(ioasa->ioasc_specific) &
+ (IPR_ADDITIONAL_STATUS_FMT | IPR_AUTOSENSE_VALID)) == 0)
+ return 0;
+
+ memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data,
+ min_t(u16, be16_to_cpu(ioasa->auto_sense.auto_sense_len),
+ SCSI_SENSE_BUFFERSIZE));
+ return 1;
+}
+
+/**
* ipr_erp_start - Process an error response for a SCSI op
* @ioa_cfg: ioa config struct
* @ipr_cmd: ipr command struct
@@ -4118,7 +4145,10 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg,
switch (ioasc & IPR_IOASC_IOASC_MASK) {
case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST:
- scsi_cmd->result |= (DID_IMM_RETRY << 16);
+ if (ipr_is_naca_model(res))
+ scsi_cmd->result |= (DID_ABORT << 16);
+ else
+ scsi_cmd->result |= (DID_IMM_RETRY << 16);
break;
case IPR_IOASC_IR_RESOURCE_HANDLE:
case IPR_IOASC_IR_NO_CMDS_TO_2ND_IOA:
@@ -4126,7 +4156,8 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg,
break;
case IPR_IOASC_HW_SEL_TIMEOUT:
scsi_cmd->result |= (DID_NO_CONNECT << 16);
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
break;
case IPR_IOASC_SYNC_REQUIRED:
if (!res->in_erp)
@@ -4146,21 +4177,27 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg,
if (!res->resetting_device)
scsi_report_bus_reset(ioa_cfg->host, scsi_cmd->device->channel);
scsi_cmd->result |= (DID_ERROR << 16);
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
break;
case IPR_IOASC_HW_DEV_BUS_STATUS:
scsi_cmd->result |= IPR_IOASC_SENSE_STATUS(ioasc);
if (IPR_IOASC_SENSE_STATUS(ioasc) == SAM_STAT_CHECK_CONDITION) {
- ipr_erp_cancel_all(ipr_cmd);
- return;
+ if (!ipr_get_autosense(ipr_cmd)) {
+ if (!ipr_is_naca_model(res)) {
+ ipr_erp_cancel_all(ipr_cmd);
+ return;
+ }
+ }
}
- res->needs_sync_complete = 1;
+ if (!ipr_is_naca_model(res))
+ res->needs_sync_complete = 1;
break;
case IPR_IOASC_NR_INIT_CMD_REQUIRED:
break;
default:
scsi_cmd->result |= (DID_ERROR << 16);
- if (!ipr_is_vset_device(res))
+ if (!ipr_is_vset_device(res) && !ipr_is_naca_model(res))
res->needs_sync_complete = 1;
break;
}
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index f7fa8cd2ecad..c9cc40e5db24 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -302,6 +302,10 @@ struct ipr_config_table_entry {
#define IPR_SUBTYPE_GENERIC_SCSI 1
#define IPR_SUBTYPE_VOLUME_SET 2
+#define IPR_QUEUEING_MODEL(res) ((((res)->cfgte.flags) & 0x70) >> 4)
+#define IPR_QUEUE_FROZEN_MODEL 0
+#define IPR_QUEUE_NACA_MODEL 1
+
struct ipr_res_addr res_addr;
__be32 res_handle;
__be32 reserved4[2];
@@ -1294,6 +1298,20 @@ static inline int ipr_is_gscsi(struct ipr_resource_entry *res)
}
/**
+ * ipr_is_naca_model - Determine if a resource is using NACA queueing model
+ * @res: resource entry struct
+ *
+ * Return value:
+ * 1 if NACA queueing model / 0 if not NACA queueing model
+ **/
+static inline int ipr_is_naca_model(struct ipr_resource_entry *res)
+{
+ if (ipr_is_gscsi(res) && IPR_QUEUEING_MODEL(res) == IPR_QUEUE_NACA_MODEL)
+ return 1;
+ return 0;
+}
+
+/**
* ipr_is_device - Determine if resource address is that of a device
* @res_addr: resource address struct
*