summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-09-05 10:30:48 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-09-05 10:30:48 -0700
commite63a94f12b5fc67b2b92a89d4058e7a9021e900e (patch)
tree9fddf35df3289bd41c2310937bf2faed4d036603
parent1a3b85ea36d38d5732fdd86b321b10bcaeb53512 (diff)
parent3840ed9548f778717aaab5eab744da798c3ea055 (diff)
downloadlinux-e63a94f12b5fc67b2b92a89d4058e7a9021e900e.tar.bz2
Merge tag 'tty-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH: "Here is the big tty/serial driver update for 4.14-rc1. Well, not all that big, just a number of small serial driver fixes, and a new serial driver. Also in here are some much needed goldfish tty driver (emulator) fixes to try to get that codebase under control. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (94 commits) tty: goldfish: Implement support for kernel 'earlycon' parameter tty: goldfish: Use streaming DMA for r/w operations on Ranchu platforms tty: goldfish: Refactor constants to better reflect their nature serial: 8250_port: Remove useless NULL checks earlycon: initialise baud field of earlycon device structure tty: hvcs: make ktermios const pty: show associative slave of ptmx in fdinfo tty: n_gsm: Add compat_ioctl tty: hvcs: constify vio_device_id tty: hvc_vio: constify vio_device_id tty: mips_ejtag_fdc: constify mips_cdmm_device_id Introduce 8250_men_mcb mcb: introduce mcb_get_resource() serial: imx: Avoid post-PIO cleanup if TX DMA is started tty: serial: imx: disable irq after suspend serial: 8250_uniphier: add suspend/resume support serial: 8250_uniphier: use CHAR register for canary to detect power-off serial: 8250_uniphier: fix serial port index in private data serial: 8250: of: Add new port type for MediaTek BTIF controller on MT7622/23 SoC dt-bindings: serial: 8250: Add MediaTek BTIF controller bindings ...
-rw-r--r--Documentation/devicetree/bindings/serial/8250.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci-serial.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/rs485.txt5
-rw-r--r--Documentation/devicetree/bindings/serial/st,stm32-usart.txt17
-rw-r--r--drivers/mcb/mcb-core.c20
-rw-r--r--drivers/tty/Kconfig3
-rw-r--r--drivers/tty/ehv_bytechan.c2
-rw-r--r--drivers/tty/goldfish.c234
-rw-r--r--drivers/tty/hvc/hvc_opal.c16
-rw-r--r--drivers/tty/hvc/hvc_vio.c8
-rw-r--r--drivers/tty/hvc/hvcs.c4
-rw-r--r--drivers/tty/isicom.c2
-rw-r--r--drivers/tty/mips_ejtag_fdc.c2
-rw-r--r--drivers/tty/moxa.c2
-rw-r--r--drivers/tty/mxser.c2
-rw-r--r--drivers/tty/n_gsm.c11
-rw-r--r--drivers/tty/pty.c8
-rw-r--r--drivers/tty/serdev/core.c2
-rw-r--r--drivers/tty/serial/21285.c2
-rw-r--r--drivers/tty/serial/8250/8250_aspeed_vuart.c7
-rw-r--r--drivers/tty/serial/8250/8250_core.c16
-rw-r--r--drivers/tty/serial/8250/8250_dw.c2
-rw-r--r--drivers/tty/serial/8250/8250_early.c8
-rw-r--r--drivers/tty/serial/8250/8250_exar.c2
-rw-r--r--drivers/tty/serial/8250/8250_ingenic.c8
-rw-r--r--drivers/tty/serial/8250/8250_men_mcb.c118
-rw-r--r--drivers/tty/serial/8250/8250_mtk.c5
-rw-r--r--drivers/tty/serial/8250/8250_of.c60
-rw-r--r--drivers/tty/serial/8250/8250_pci.c43
-rw-r--r--drivers/tty/serial/8250/8250_port.c81
-rw-r--r--drivers/tty/serial/8250/8250_uniphier.c63
-rw-r--r--drivers/tty/serial/8250/Kconfig11
-rw-r--r--drivers/tty/serial/8250/Makefile1
-rw-r--r--drivers/tty/serial/Kconfig4
-rw-r--r--drivers/tty/serial/amba-pl010.c2
-rw-r--r--drivers/tty/serial/amba-pl011.c6
-rw-r--r--drivers/tty/serial/apbuart.c2
-rw-r--r--drivers/tty/serial/arc_uart.c4
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart_core.c2
-rw-r--r--drivers/tty/serial/earlycon.c7
-rw-r--r--drivers/tty/serial/fsl_lpuart.c76
-rw-r--r--drivers/tty/serial/imx.c20
-rw-r--r--drivers/tty/serial/jsm/jsm_driver.c2
-rw-r--r--drivers/tty/serial/m32r_sio.c2
-rw-r--r--drivers/tty/serial/meson_uart.c2
-rw-r--r--drivers/tty/serial/mpc52xx_uart.c14
-rw-r--r--drivers/tty/serial/msm_serial.c19
-rw-r--r--drivers/tty/serial/mux.c2
-rw-r--r--drivers/tty/serial/omap-serial.c13
-rw-r--r--drivers/tty/serial/owl-uart.c635
-rw-r--r--drivers/tty/serial/pch_uart.c38
-rw-r--r--drivers/tty/serial/pmac_zilog.c4
-rw-r--r--drivers/tty/serial/serial-tegra.c2
-rw-r--r--drivers/tty/serial/serial_core.c47
-rw-r--r--drivers/tty/serial/sh-sci.c3
-rw-r--r--drivers/tty/serial/sprd_serial.c8
-rw-r--r--drivers/tty/serial/st-asc.c2
-rw-r--r--drivers/tty/serial/stm32-usart.c125
-rw-r--r--drivers/tty/serial/stm32-usart.h37
-rw-r--r--drivers/tty/serial/sunsab.c2
-rw-r--r--drivers/tty/serial/sunsu.c6
-rw-r--r--drivers/tty/serial/ucc_uart.c2
-rw-r--r--drivers/tty/serial/xilinx_uartps.c2
-rw-r--r--drivers/tty/synclink.c2
-rw-r--r--drivers/tty/synclink_gt.c2
-rw-r--r--drivers/tty/synclinkmp.c2
-rw-r--r--drivers/tty/tty_buffer.c26
-rw-r--r--drivers/tty/tty_io.c9
-rw-r--r--include/linux/mcb.h2
-rw-r--r--include/linux/serial_8250.h7
-rw-r--r--include/linux/serial_core.h10
-rw-r--r--include/linux/tty_driver.h2
-rw-r--r--include/linux/tty_flip.h3
-rw-r--r--include/uapi/linux/serial_core.h14
74 files changed, 1630 insertions, 308 deletions
diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index 419ff6c0a47f..dad3b2ec66d4 100644
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -14,6 +14,8 @@ Required properties:
tegra132, or tegra210.
- "nxp,lpc3220-uart"
- "ralink,rt2880-uart"
+ - For MediaTek BTIF, must contain '"mediatek,<chip>-btif",
+ "mediatek,mtk-btif"' where <chip> is mt7622, mt7623.
- "altr,16550-FIFO32"
- "altr,16550-FIFO64"
- "altr,16550-FIFO128"
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 8d27d1a603e7..4fc96946f81d 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -41,6 +41,8 @@ Required properties:
- "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
- "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
- "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+ - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART.
+ - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART.
- "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
- "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
- "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART,
diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt
index 32b1fa1f2a5b..b8415936dfdb 100644
--- a/Documentation/devicetree/bindings/serial/rs485.txt
+++ b/Documentation/devicetree/bindings/serial/rs485.txt
@@ -5,14 +5,13 @@ the built-in half-duplex mode.
The properties described hereafter shall be given to a half-duplex capable
UART node.
-Required properties:
+Optional properties:
- rs485-rts-delay: prop-encoded-array <a b> where:
* a is the delay between rts signal and beginning of data sent in milliseconds.
it corresponds to the delay before sending data.
* b is the delay between end of data sent and rts signal in milliseconds
it corresponds to the delay after sending data and actual release of the line.
-
-Optional properties:
+ If this property is not specified, <0 0> is assumed.
- linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485
feature at boot time. It can be disabled later with proper ioctl.
- rs485-rx-during-tx: empty property that enables the receiving of data even
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
index 85ec5f2b1996..3657f9f9d17a 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -1,12 +1,19 @@
* STMicroelectronics STM32 USART
Required properties:
-- compatible: Can be either "st,stm32-usart", "st,stm32-uart",
-"st,stm32f7-usart" or "st,stm32f7-uart" depending on whether
-the device supports synchronous mode and is compatible with
-stm32(f4) or stm32f7.
+- compatible: can be either:
+ - "st,stm32-usart",
+ - "st,stm32-uart",
+ - "st,stm32f7-usart",
+ - "st,stm32f7-uart",
+ - "st,stm32h7-usart"
+ - "st,stm32h7-uart".
+ depending on whether the device supports synchronous mode
+ and is compatible with stm32(f4), stm32f7 or stm32h7.
- reg: The address and length of the peripheral registers space
-- interrupts: The interrupt line of the USART instance
+- interrupts:
+ - The interrupt line for the USART instance,
+ - An optional wake-up interrupt.
- clocks: The input clock of the USART instance
Optional properties:
diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c
index 921a5d2a802b..bb5c5692dedc 100644
--- a/drivers/mcb/mcb-core.c
+++ b/drivers/mcb/mcb-core.c
@@ -418,6 +418,22 @@ void mcb_bus_add_devices(const struct mcb_bus *bus)
EXPORT_SYMBOL_GPL(mcb_bus_add_devices);
/**
+ * mcb_get_resource() - get a resource for a mcb device
+ * @dev: the mcb device
+ * @type: the type of resource
+ */
+struct resource *mcb_get_resource(struct mcb_device *dev, unsigned int type)
+{
+ if (type == IORESOURCE_MEM)
+ return &dev->mem;
+ else if (type == IORESOURCE_IRQ)
+ return &dev->irq;
+ else
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(mcb_get_resource);
+
+/**
* mcb_request_mem() - Request memory
* @dev: The @mcb_device the memory is for
* @name: The name for the memory reference.
@@ -460,7 +476,9 @@ EXPORT_SYMBOL_GPL(mcb_release_mem);
static int __mcb_get_irq(struct mcb_device *dev)
{
- struct resource *irq = &dev->irq;
+ struct resource *irq;
+
+ irq = mcb_get_resource(dev, IORESOURCE_IRQ);
return irq->start;
}
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 95103054c0e4..873e0ba89737 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -392,6 +392,9 @@ config PPC_EARLY_DEBUG_EHV_BC_HANDLE
config GOLDFISH_TTY
tristate "Goldfish TTY Driver"
depends on GOLDFISH
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
help
Console and system TTY driver for the Goldfish virtual platform.
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 61fe8d6fd24e..a1c7125cb968 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -122,7 +122,7 @@ static int find_console_handle(void)
stdout_irq = irq_of_parse_and_map(np, 0);
if (stdout_irq == NO_IRQ) {
- pr_err("ehv-bc: no 'interrupts' property in %s node\n", np->full_name);
+ pr_err("ehv-bc: no 'interrupts' property in %pOF node\n", np);
return 0;
}
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index 996bd473dd03..381e981dee06 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -1,6 +1,7 @@
/*
* Copyright (C) 2007 Google, Inc.
* Copyright (C) 2012 Intel, Inc.
+ * Copyright (C) 2017 Imagination Technologies Ltd.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -22,21 +23,23 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/goldfish.h>
-
-enum {
- GOLDFISH_TTY_PUT_CHAR = 0x00,
- GOLDFISH_TTY_BYTES_READY = 0x04,
- GOLDFISH_TTY_CMD = 0x08,
-
- GOLDFISH_TTY_DATA_PTR = 0x10,
- GOLDFISH_TTY_DATA_LEN = 0x14,
- GOLDFISH_TTY_DATA_PTR_HIGH = 0x18,
-
- GOLDFISH_TTY_CMD_INT_DISABLE = 0,
- GOLDFISH_TTY_CMD_INT_ENABLE = 1,
- GOLDFISH_TTY_CMD_WRITE_BUFFER = 2,
- GOLDFISH_TTY_CMD_READ_BUFFER = 3,
-};
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_core.h>
+
+/* Goldfish tty register's offsets */
+#define GOLDFISH_TTY_REG_BYTES_READY 0x04
+#define GOLDFISH_TTY_REG_CMD 0x08
+#define GOLDFISH_TTY_REG_DATA_PTR 0x10
+#define GOLDFISH_TTY_REG_DATA_LEN 0x14
+#define GOLDFISH_TTY_REG_DATA_PTR_HIGH 0x18
+#define GOLDFISH_TTY_REG_VERSION 0x20
+
+/* Goldfish tty commands */
+#define GOLDFISH_TTY_CMD_INT_DISABLE 0
+#define GOLDFISH_TTY_CMD_INT_ENABLE 1
+#define GOLDFISH_TTY_CMD_WRITE_BUFFER 2
+#define GOLDFISH_TTY_CMD_READ_BUFFER 3
struct goldfish_tty {
struct tty_port port;
@@ -45,6 +48,8 @@ struct goldfish_tty {
u32 irq;
int opencount;
struct console console;
+ u32 version;
+ struct device *dev;
};
static DEFINE_MUTEX(goldfish_tty_lock);
@@ -53,38 +58,107 @@ static u32 goldfish_tty_line_count = 8;
static u32 goldfish_tty_current_line_count;
static struct goldfish_tty *goldfish_ttys;
-static void goldfish_tty_do_write(int line, const char *buf, unsigned count)
+static void do_rw_io(struct goldfish_tty *qtty,
+ unsigned long address,
+ unsigned int count,
+ int is_write)
{
unsigned long irq_flags;
- struct goldfish_tty *qtty = &goldfish_ttys[line];
void __iomem *base = qtty->base;
+
spin_lock_irqsave(&qtty->lock, irq_flags);
- gf_write_ptr(buf, base + GOLDFISH_TTY_DATA_PTR,
- base + GOLDFISH_TTY_DATA_PTR_HIGH);
- writel(count, base + GOLDFISH_TTY_DATA_LEN);
- writel(GOLDFISH_TTY_CMD_WRITE_BUFFER, base + GOLDFISH_TTY_CMD);
+ gf_write_ptr((void *)address, base + GOLDFISH_TTY_REG_DATA_PTR,
+ base + GOLDFISH_TTY_REG_DATA_PTR_HIGH);
+ writel(count, base + GOLDFISH_TTY_REG_DATA_LEN);
+
+ if (is_write)
+ writel(GOLDFISH_TTY_CMD_WRITE_BUFFER,
+ base + GOLDFISH_TTY_REG_CMD);
+ else
+ writel(GOLDFISH_TTY_CMD_READ_BUFFER,
+ base + GOLDFISH_TTY_REG_CMD);
+
spin_unlock_irqrestore(&qtty->lock, irq_flags);
}
+static void goldfish_tty_rw(struct goldfish_tty *qtty,
+ unsigned long addr,
+ unsigned int count,
+ int is_write)
+{
+ dma_addr_t dma_handle;
+ enum dma_data_direction dma_dir;
+
+ dma_dir = (is_write ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ if (qtty->version > 0) {
+ /*
+ * Goldfish TTY for Ranchu platform uses
+ * physical addresses and DMA for read/write operations
+ */
+ unsigned long addr_end = addr + count;
+
+ while (addr < addr_end) {
+ unsigned long pg_end = (addr & PAGE_MASK) + PAGE_SIZE;
+ unsigned long next =
+ pg_end < addr_end ? pg_end : addr_end;
+ unsigned long avail = next - addr;
+
+ /*
+ * Map the buffer's virtual address to the DMA address
+ * so the buffer can be accessed by the device.
+ */
+ dma_handle = dma_map_single(qtty->dev, (void *)addr,
+ avail, dma_dir);
+
+ if (dma_mapping_error(qtty->dev, dma_handle)) {
+ dev_err(qtty->dev, "tty: DMA mapping error.\n");
+ return;
+ }
+ do_rw_io(qtty, dma_handle, avail, is_write);
+
+ /*
+ * Unmap the previously mapped region after
+ * the completion of the read/write operation.
+ */
+ dma_unmap_single(qtty->dev, dma_handle, avail, dma_dir);
+
+ addr += avail;
+ }
+ } else {
+ /*
+ * Old style Goldfish TTY used on the Goldfish platform
+ * uses virtual addresses.
+ */
+ do_rw_io(qtty, addr, count, is_write);
+ }
+}
+
+static void goldfish_tty_do_write(int line, const char *buf,
+ unsigned int count)
+{
+ struct goldfish_tty *qtty = &goldfish_ttys[line];
+ unsigned long address = (unsigned long)(void *)buf;
+
+ goldfish_tty_rw(qtty, address, count, 1);
+}
+
static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id)
{
struct goldfish_tty *qtty = dev_id;
void __iomem *base = qtty->base;
- unsigned long irq_flags;
+ unsigned long address;
unsigned char *buf;
u32 count;
- count = readl(base + GOLDFISH_TTY_BYTES_READY);
+ count = readl(base + GOLDFISH_TTY_REG_BYTES_READY);
if (count == 0)
return IRQ_NONE;
count = tty_prepare_flip_string(&qtty->port, &buf, count);
- spin_lock_irqsave(&qtty->lock, irq_flags);
- gf_write_ptr(buf, base + GOLDFISH_TTY_DATA_PTR,
- base + GOLDFISH_TTY_DATA_PTR_HIGH);
- writel(count, base + GOLDFISH_TTY_DATA_LEN);
- writel(GOLDFISH_TTY_CMD_READ_BUFFER, base + GOLDFISH_TTY_CMD);
- spin_unlock_irqrestore(&qtty->lock, irq_flags);
+
+ address = (unsigned long)(void *)buf;
+ goldfish_tty_rw(qtty, address, count, 0);
+
tty_schedule_flip(&qtty->port);
return IRQ_HANDLED;
}
@@ -93,7 +167,7 @@ static int goldfish_tty_activate(struct tty_port *port, struct tty_struct *tty)
{
struct goldfish_tty *qtty = container_of(port, struct goldfish_tty,
port);
- writel(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_CMD);
+ writel(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
return 0;
}
@@ -101,7 +175,7 @@ static void goldfish_tty_shutdown(struct tty_port *port)
{
struct goldfish_tty *qtty = container_of(port, struct goldfish_tty,
port);
- writel(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_CMD);
+ writel(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
}
static int goldfish_tty_open(struct tty_struct *tty, struct file *filp)
@@ -136,7 +210,7 @@ static int goldfish_tty_chars_in_buffer(struct tty_struct *tty)
{
struct goldfish_tty *qtty = &goldfish_ttys[tty->index];
void __iomem *base = qtty->base;
- return readl(base + GOLDFISH_TTY_BYTES_READY);
+ return readl(base + GOLDFISH_TTY_REG_BYTES_READY);
}
static void goldfish_tty_console_write(struct console *co, const char *b,
@@ -227,7 +301,7 @@ static void goldfish_tty_delete_driver(void)
static int goldfish_tty_probe(struct platform_device *pdev)
{
struct goldfish_tty *qtty;
- int ret = -EINVAL;
+ int ret = -ENODEV;
struct resource *r;
struct device *ttydev;
void __iomem *base;
@@ -235,16 +309,22 @@ static int goldfish_tty_probe(struct platform_device *pdev)
unsigned int line;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (r == NULL)
- return -EINVAL;
+ if (!r) {
+ pr_err("goldfish_tty: No MEM resource available!\n");
+ return -ENOMEM;
+ }
base = ioremap(r->start, 0x1000);
- if (base == NULL)
- pr_err("goldfish_tty: unable to remap base\n");
+ if (!base) {
+ pr_err("goldfish_tty: Unable to ioremap base!\n");
+ return -ENOMEM;
+ }
r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (r == NULL)
+ if (!r) {
+ pr_err("goldfish_tty: No IRQ resource available!\n");
goto err_unmap;
+ }
irq = r->start;
@@ -255,13 +335,17 @@ static int goldfish_tty_probe(struct platform_device *pdev)
else
line = pdev->id;
- if (line >= goldfish_tty_line_count)
- goto err_create_driver_failed;
+ if (line >= goldfish_tty_line_count) {
+ pr_err("goldfish_tty: Reached maximum tty number of %d.\n",
+ goldfish_tty_current_line_count);
+ ret = -ENOMEM;
+ goto err_unlock;
+ }
if (goldfish_tty_current_line_count == 0) {
ret = goldfish_tty_create_driver();
if (ret)
- goto err_create_driver_failed;
+ goto err_unlock;
}
goldfish_tty_current_line_count++;
@@ -271,17 +355,45 @@ static int goldfish_tty_probe(struct platform_device *pdev)
qtty->port.ops = &goldfish_port_ops;
qtty->base = base;
qtty->irq = irq;
+ qtty->dev = &pdev->dev;
+
+ /*
+ * Goldfish TTY device used by the Goldfish emulator
+ * should identify itself with 0, forcing the driver
+ * to use virtual addresses. Goldfish TTY device
+ * on Ranchu emulator (qemu2) returns 1 here and
+ * driver will use physical addresses.
+ */
+ qtty->version = readl(base + GOLDFISH_TTY_REG_VERSION);
+
+ /*
+ * Goldfish TTY device on Ranchu emulator (qemu2)
+ * will use DMA for read/write IO operations.
+ */
+ if (qtty->version > 0) {
+ /*
+ * Initialize dma_mask to 32-bits.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "No suitable DMA available.\n");
+ goto err_dec_line_count;
+ }
+ }
- writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_CMD);
+ writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD);
ret = request_irq(irq, goldfish_tty_interrupt, IRQF_SHARED,
- "goldfish_tty", qtty);
- if (ret)
- goto err_request_irq_failed;
-
+ "goldfish_tty", qtty);
+ if (ret) {
+ pr_err("goldfish_tty: No IRQ available!\n");
+ goto err_dec_line_count;
+ }
ttydev = tty_port_register_device(&qtty->port, goldfish_tty_driver,
- line, &pdev->dev);
+ line, &pdev->dev);
if (IS_ERR(ttydev)) {
ret = PTR_ERR(ttydev);
goto err_tty_register_device_failed;
@@ -301,11 +413,11 @@ static int goldfish_tty_probe(struct platform_device *pdev)
err_tty_register_device_failed:
free_irq(irq, qtty);
-err_request_irq_failed:
+err_dec_line_count:
goldfish_tty_current_line_count--;
if (goldfish_tty_current_line_count == 0)
goldfish_tty_delete_driver();
-err_create_driver_failed:
+err_unlock:
mutex_unlock(&goldfish_tty_lock);
err_unmap:
iounmap(base);
@@ -330,6 +442,30 @@ static int goldfish_tty_remove(struct platform_device *pdev)
return 0;
}
+static void gf_early_console_putchar(struct uart_port *port, int ch)
+{
+ __raw_writel(ch, port->membase);
+}
+
+static void gf_early_write(struct console *con, const char *s, unsigned int n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, gf_early_console_putchar);
+}
+
+static int __init gf_earlycon_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = gf_early_write;
+ return 0;
+}
+
+OF_EARLYCON_DECLARE(early_gf_tty, "google,goldfish-tty", gf_earlycon_setup);
+
static const struct of_device_id goldfish_tty_of_match[] = {
{ .compatible = "google,goldfish-tty", },
{},
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index 510799311099..16331a90c1e8 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -179,8 +179,8 @@ static int hvc_opal_probe(struct platform_device *dev)
proto = HV_PROTOCOL_HVSI;
ops = &hvc_opal_hvsi_ops;
} else {
- pr_err("hvc_opal: Unknown protocol for %s\n",
- dev->dev.of_node->full_name);
+ pr_err("hvc_opal: Unknown protocol for %pOF\n",
+ dev->dev.of_node);
return -ENXIO;
}
@@ -204,14 +204,14 @@ static int hvc_opal_probe(struct platform_device *dev)
/* Instanciate now to establish a mapping index==vtermno */
hvc_instantiate(termno, termno, ops);
} else {
- pr_err("hvc_opal: Device %s has duplicate terminal number #%d\n",
- dev->dev.of_node->full_name, termno);
+ pr_err("hvc_opal: Device %pOF has duplicate terminal number #%d\n",
+ dev->dev.of_node, termno);
return -ENXIO;
}
- pr_info("hvc%d: %s protocol on %s%s\n", termno,
+ pr_info("hvc%d: %s protocol on %pOF%s\n", termno,
proto == HV_PROTOCOL_RAW ? "raw" : "hvsi",
- dev->dev.of_node->full_name,
+ dev->dev.of_node,
boot ? " (boot console)" : "");
irq = irq_of_parse_and_map(dev->dev.of_node, 0);
@@ -222,8 +222,8 @@ static int hvc_opal_probe(struct platform_device *dev)
}
if (!irq) {
- pr_err("hvc_opal: Unable to map interrupt for device %s\n",
- dev->dev.of_node->full_name);
+ pr_err("hvc_opal: Unable to map interrupt for device %pOF\n",
+ dev->dev.of_node);
return irq;
}
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index b05dc5086627..653f99271865 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -53,7 +53,7 @@
static const char hvc_driver_name[] = "hvc_console";
-static struct vio_device_id hvc_driver_table[] = {
+static const struct vio_device_id hvc_driver_table[] = {
{"serial", "hvterm1"},
#ifndef HVC_OLD_HVSI
{"serial", "hvterm-protocol"},
@@ -312,12 +312,12 @@ static int hvc_vio_probe(struct vio_dev *vdev,
proto = HV_PROTOCOL_HVSI;
ops = &hvterm_hvsi_ops;
} else {
- pr_err("hvc_vio: Unknown protocol for %s\n", vdev->dev.of_node->full_name);
+ pr_err("hvc_vio: Unknown protocol for %pOF\n", vdev->dev.of_node);
return -ENXIO;
}
- pr_devel("hvc_vio_probe() device %s, using %s protocol\n",
- vdev->dev.of_node->full_name,
+ pr_devel("hvc_vio_probe() device %pOF, using %s protocol\n",
+ vdev->dev.of_node,
proto == HV_PROTOCOL_RAW ? "raw" : "hvsi");
/* Is it our boot one ? */
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 79cc5beea2da..63c29fe9d21f 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -189,7 +189,7 @@ MODULE_VERSION(HVCS_DRIVER_VERSION);
* that will cause echoing or we'll go into recursive loop echoing chars back
* and forth with the console drivers.
*/
-static struct ktermios hvcs_tty_termios = {
+static const struct ktermios hvcs_tty_termios = {
.c_iflag = IGNBRK | IGNPAR,
.c_oflag = OPOST,
.c_cflag = B38400 | CS8 | CREAD | HUPCL,
@@ -675,7 +675,7 @@ static int khvcsd(void *unused)
return 0;
}
-static struct vio_device_id hvcs_driver_table[] = {
+static const struct vio_device_id hvcs_driver_table[] = {
{"serial-server", "hvterm2"},
{ "", "" }
};
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index b70187b46d9d..61ecdd6b2fc2 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -150,7 +150,7 @@
static int isicom_probe(struct pci_dev *, const struct pci_device_id *);
static void isicom_remove(struct pci_dev *);
-static struct pci_device_id isicom_pci_tbl[] = {
+static const struct pci_device_id isicom_pci_tbl[] = {
{ PCI_DEVICE(VENDOR_ID, 0x2028) },
{ PCI_DEVICE(VENDOR_ID, 0x2051) },
{ PCI_DEVICE(VENDOR_ID, 0x2052) },
diff --git a/drivers/tty/mips_ejtag_fdc.c b/drivers/tty/mips_ejtag_fdc.c
index 234123b0c642..a2dab3fb8751 100644
--- a/drivers/tty/mips_ejtag_fdc.c
+++ b/drivers/tty/mips_ejtag_fdc.c
@@ -1110,7 +1110,7 @@ out:
return ret;
}
-static struct mips_cdmm_device_id mips_ejtag_fdc_tty_ids[] = {
+static const struct mips_cdmm_device_id mips_ejtag_fdc_tty_ids[] = {
{ .type = 0xfd },
{ }
};
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 3b251f4e5df0..7f3d4cb0341b 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -88,7 +88,7 @@ static char *moxa_brdname[] =
};
#ifdef CONFIG_PCI
-static struct pci_device_id moxa_pcibrds[] = {
+static const struct pci_device_id moxa_pcibrds[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
.driver_data = MOXA_BOARD_C218_PCI },
{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 8bd6fb6d9391..1c0c9553bc05 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -145,7 +145,7 @@ static const struct mxser_cardinfo mxser_cards[] = {
/* driver_data correspond to the lines in the structure above
see also ISA probe function before you change something */
-static struct pci_device_id mxser_pcibrds[] = {
+static const struct pci_device_id mxser_pcibrds[] = {
{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 },
{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 },
{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 },
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 2afe5fce68e3..0a3c9665e015 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2607,6 +2607,14 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file,
}
}
+#ifdef CONFIG_COMPAT
+static long gsmld_compat_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return gsmld_ioctl(tty, file, cmd, arg);
+}
+#endif
+
/*
* Network interface
*
@@ -2818,6 +2826,9 @@ static struct tty_ldisc_ops tty_ldisc_packet = {
.flush_buffer = gsmld_flush_buffer,
.read = gsmld_read,
.write = gsmld_write,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = gsmld_compat_ioctl,
+#endif
.ioctl = gsmld_ioctl,
.poll = gsmld_poll,
.receive_buf = gsmld_receive_buf,
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index a6d5164c33a9..26dcb3b60fb9 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -742,6 +742,11 @@ static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
}
}
+static void pty_show_fdinfo(struct tty_struct *tty, struct seq_file *m)
+{
+ seq_printf(m, "tty-index:\t%d\n", tty->index);
+}
+
static const struct tty_operations ptm_unix98_ops = {
.lookup = ptm_unix98_lookup,
.install = pty_unix98_install,
@@ -756,7 +761,8 @@ static const struct tty_operations ptm_unix98_ops = {
.ioctl = pty_unix98_ioctl,
.compat_ioctl = pty_unix98_compat_ioctl,
.resize = pty_resize,
- .cleanup = pty_cleanup
+ .cleanup = pty_cleanup,
+ .show_fdinfo = pty_show_fdinfo,
};
static const struct tty_operations pty_unix98_ops = {
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index ae1aaa0075d1..c68fb3a8ea1c 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -363,7 +363,7 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
if (!of_get_property(node, "compatible", NULL))
continue;
- dev_dbg(&ctrl->dev, "adding child %s\n", node->full_name);
+ dev_dbg(&ctrl->dev, "adding child %pOF\n", node);
serdev = serdev_device_alloc(ctrl);
if (!serdev)
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c
index 9b208bd686e6..804632b4a929 100644
--- a/drivers/tty/serial/21285.c
+++ b/drivers/tty/serial/21285.c
@@ -334,7 +334,7 @@ static int serial21285_verify_port(struct uart_port *port, struct serial_struct
return ret;
}
-static struct uart_ops serial21285_ops = {
+static const struct uart_ops serial21285_ops = {
.tx_empty = serial21285_tx_empty,
.get_mctrl = serial21285_get_mctrl,
.set_mctrl = serial21285_set_mctrl,
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 822be4906763..33a801353114 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -223,12 +223,13 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
if (IS_ERR(vuart->clk)) {
dev_warn(&pdev->dev,
"clk or clock-frequency not defined\n");
- return PTR_ERR(vuart->clk);
+ rc = PTR_ERR(vuart->clk);
+ goto err_sysfs_remove;
}
rc = clk_prepare_enable(vuart->clk);
if (rc < 0)
- return rc;
+ goto err_sysfs_remove;
clk = clk_get_rate(vuart->clk);
}
@@ -286,6 +287,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
err_clk_disable:
clk_disable_unprepare(vuart->clk);
irq_dispose_mapping(port.port.irq);
+err_sysfs_remove:
+ sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
return rc;
}
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 1aab3010fbfa..d29b512a7d9f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -497,6 +497,11 @@ static void univ8250_rsa_support(struct uart_ops *ops)
#define univ8250_rsa_support(x) do { } while (0)
#endif /* CONFIG_SERIAL_8250_RSA */
+static inline void serial8250_apply_quirks(struct uart_8250_port *up)
+{
+ up->port.quirks |= skip_txen_test ? UPQ_NO_TXEN_TEST : 0;
+}
+
static void __init serial8250_isa_init_ports(void)
{
struct uart_8250_port *up;
@@ -577,9 +582,7 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
up->port.dev = dev;
- if (skip_txen_test)
- up->port.flags |= UPF_NO_TXEN_TEST;
-
+ serial8250_apply_quirks(up);
uart_add_one_port(drv, &up->port);
}
}
@@ -1006,9 +1009,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
if (up->port.dev)
uart->port.dev = up->port.dev;
- if (skip_txen_test)
- uart->port.flags |= UPF_NO_TXEN_TEST;
-
if (up->port.flags & UPF_FIXED_TYPE)
uart->port.type = up->port.type;
@@ -1048,6 +1048,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
serial8250_isa_config(0, &uart->port,
&uart->capabilities);
+ serial8250_apply_quirks(uart);
ret = uart_add_one_port(&serial8250_reg,
&uart->port);
if (ret == 0)
@@ -1092,11 +1093,10 @@ void serial8250_unregister_port(int line)
uart_remove_one_port(&serial8250_reg, &uart->port);
if (serial8250_isa_devs) {
uart->port.flags &= ~UPF_BOOT_AUTOCONF;
- if (skip_txen_test)
- uart->port.flags |= UPF_NO_TXEN_TEST;
uart->port.type = PORT_UNKNOWN;
uart->port.dev = &serial8250_isa_devs->dev;
uart->capabilities = 0;
+ serial8250_apply_quirks(uart);
uart_add_one_port(&serial8250_reg, &uart->port);
} else {
uart->port.dev = NULL;
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 787b1160d3a5..7e638997bfc2 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -529,7 +529,7 @@ static int dw8250_probe(struct platform_device *pdev)
}
}
- data->rst = devm_reset_control_get_optional(dev, NULL);
+ data->rst = devm_reset_control_get_optional_exclusive(dev, NULL);
if (IS_ERR(data->rst)) {
err = PTR_ERR(data->rst);
goto err_pclk;
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 82fc48eca1df..af72ec32e404 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -37,7 +37,7 @@
#include <asm/io.h>
#include <asm/serial.h>
-static unsigned int __init serial8250_early_in(struct uart_port *port, int offset)
+static unsigned int serial8250_early_in(struct uart_port *port, int offset)
{
int reg_offset = offset;
offset <<= port->regshift;
@@ -60,7 +60,7 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
}
}
-static void __init serial8250_early_out(struct uart_port *port, int offset, int value)
+static void serial8250_early_out(struct uart_port *port, int offset, int value)
{
int reg_offset = offset;
offset <<= port->regshift;
@@ -89,7 +89,7 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-static void __init serial_putc(struct uart_port *port, int c)
+static void serial_putc(struct uart_port *port, int c)
{
unsigned int status;
@@ -103,7 +103,7 @@ static void __init serial_putc(struct uart_port *port, int c)
}
}
-static void __init early_serial8250_write(struct console *console,
+static void early_serial8250_write(struct console *console,
const char *s, unsigned int count)
{
struct earlycon_device *device = console->data;
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index c6360fbdf808..c55624703fdf 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -601,7 +601,7 @@ static const struct exar8250_board pbn_exar_XR17V8358 = {
(kernel_ulong_t)&bd \
}
-static struct pci_device_id exar_pci_tbl[] = {
+static const struct pci_device_id exar_pci_tbl[] = {
CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect),
CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect),
CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect),
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 4d9dc10e265c..464389b28900 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -50,17 +50,17 @@ static const struct of_device_id of_match[];
static struct earlycon_device *early_device;
-static uint8_t __init early_in(struct uart_port *port, int offset)
+static uint8_t early_in(struct uart_port *port, int offset)
{
return readl(port->membase + (offset << 2));
}
-static void __init early_out(struct uart_port *port, int offset, uint8_t value)
+static void early_out(struct uart_port *port, int offset, uint8_t value)
{
writel(value, port->membase + (offset << 2));
}
-static void __init ingenic_early_console_putc(struct uart_port *port, int c)
+static void ingenic_early_console_putc(struct uart_port *port, int c)
{
uint8_t lsr;
@@ -71,7 +71,7 @@ static void __init ingenic_early_console_putc(struct uart_port *port, int c)
early_out(port, UART_TX, c);
}
-static void __init ingenic_early_console_write(struct console *console,
+static void ingenic_early_console_write(struct console *console,
const char *s, unsigned int count)
{
uart_console_write(&early_device->port, s, count,
diff --git a/drivers/tty/serial/8250/8250_men_mcb.c b/drivers/tty/serial/8250/8250_men_mcb.c
new file mode 100644
index 000000000000..308977807994
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_men_mcb.c
@@ -0,0 +1,118 @@
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mcb.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <uapi/linux/serial_core.h>
+
+struct serial_8250_men_mcb_data {
+ struct uart_8250_port uart;
+ int line;
+};
+
+/*
+ * The Z125 16550-compatible UART has no fixed base clock assigned
+ * So, depending on the board we're on, we need to adjust the
+ * parameter in order to really set the correct baudrate, and
+ * do so if possible without user interaction
+ */
+static u32 men_z125_lookup_uartclk(struct mcb_device *mdev)
+{
+ /* use default value if board is not available below */
+ u32 clkval = 1041666;
+
+ dev_info(&mdev->dev, "%s on board %s\n",
+ dev_name(&mdev->dev),
+ mdev->bus->name);
+ if (strncmp(mdev->bus->name, "F075", 4) == 0)
+ clkval = 1041666;
+ else if (strncmp(mdev->bus->name, "F216", 4) == 0)
+ clkval = 1843200;
+ else if (strncmp(mdev->bus->name, "G215", 4) == 0)
+ clkval = 1843200;
+ else
+ dev_info(&mdev->dev,
+ "board not detected, using default uartclk\n");
+
+ clkval = clkval << 4;
+
+ return clkval;
+}
+
+static int serial_8250_men_mcb_probe(struct mcb_device *mdev,
+ const struct mcb_device_id *id)
+{
+ struct serial_8250_men_mcb_data *data;
+ struct resource *mem;
+
+ data = devm_kzalloc(&mdev->dev,
+ sizeof(struct serial_8250_men_mcb_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ mcb_set_drvdata(mdev, data);
+ data->uart.port.dev = mdev->dma_dev;
+ spin_lock_init(&data->uart.port.lock);
+
+ data->uart.port.type = PORT_16550;
+ data->uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+ data->uart.port.iotype = UPIO_MEM;
+ data->uart.port.uartclk = men_z125_lookup_uartclk(mdev);
+ data->uart.port.regshift = 0;
+ data->uart.port.fifosize = 60;
+
+ mem = mcb_get_resource(mdev, IORESOURCE_MEM);
+ if (mem == NULL)
+ return -ENXIO;
+
+ data->uart.port.irq = mcb_get_irq(mdev);
+
+ data->uart.port.membase = devm_ioremap_resource(&mdev->dev, mem);
+ if (IS_ERR(data->uart.port.membase))
+ return PTR_ERR_OR_ZERO(data->uart.port.membase);
+
+ data->uart.port.mapbase = (unsigned long) mem->start;
+ data->uart.port.iobase = data->uart.port.mapbase;
+
+ /* ok, register the port */
+ data->line = serial8250_register_8250_port(&data->uart);
+ if (data->line < 0)
+ return data->line;
+
+ dev_info(&mdev->dev, "found 16Z125 UART: ttyS%d\n", data->line);
+
+ return 0;
+}
+
+static void serial_8250_men_mcb_remove(struct mcb_device *mdev)
+{
+ struct serial_8250_men_mcb_data *data = mcb_get_drvdata(mdev);
+
+ if (data)
+ serial8250_unregister_port(data->line);
+}
+
+static const struct mcb_device_id serial_8250_men_mcb_ids[] = {
+ { .device = 0x7d },
+ { }
+};
+MODULE_DEVICE_TABLE(mcb, serial_8250_men_mcb_ids);
+
+static struct mcb_driver mcb_driver = {
+ .driver = {
+ .name = "8250_men_mcb",
+ .owner = THIS_MODULE,
+ },
+ .probe = serial_8250_men_mcb_probe,
+ .remove = serial_8250_men_mcb_remove,
+ .id_table = serial_8250_men_mcb_ids,
+};
+module_mcb_driver(mcb_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MEN 16z125 8250 UART driver");
+MODULE_AUTHOR("Michael Moese <michael.moese@men.de");
+MODULE_ALIAS("mcb:16z125");
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index ce0cc471bfc3..fb45770d47aa 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -171,10 +171,7 @@ static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p,
}
data->bus_clk = devm_clk_get(&pdev->dev, "bus");
- if (IS_ERR(data->bus_clk))
- return PTR_ERR(data->bus_clk);
-
- return 0;
+ return PTR_ERR_OR_ZERO(data->bus_clk);
}
static int mtk8250_probe(struct platform_device *pdev)
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 0cf95fddccfc..1222c005fb98 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -18,6 +18,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/reset.h>
@@ -65,6 +66,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
int ret;
memset(port, 0, sizeof *port);
+
+ pm_runtime_enable(&ofdev->dev);
+ pm_runtime_get_sync(&ofdev->dev);
+
if (of_property_read_u32(np, "clock-frequency", &clk)) {
/* Get clk rate through clk driver if present */
@@ -72,12 +77,13 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
if (IS_ERR(info->clk)) {
dev_warn(&ofdev->dev,
"clk or clock-frequency not defined\n");
- return PTR_ERR(info->clk);
+ ret = PTR_ERR(info->clk);
+ goto err_pmruntime;
}
ret = clk_prepare_enable(info->clk);
if (ret < 0)
- return ret;
+ goto err_pmruntime;
clk = clk_get_rate(info->clk);
}
@@ -88,7 +94,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
ret = of_address_to_resource(np, 0, &resource);
if (ret) {
dev_warn(&ofdev->dev, "invalid address\n");
- goto out;
+ goto err_unprepare;
}
spin_lock_init(&port->lock);
@@ -130,23 +136,23 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
prop);
ret = -EINVAL;
- goto out;
+ goto err_dispose;
}
}
info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
if (IS_ERR(info->rst))
- goto out;
+ goto err_dispose;
ret = reset_control_deassert(info->rst);
if (ret)
- goto out;
+ goto err_dispose;
port->type = type;
port->uartclk = clk;
port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
| UPF_FIXED_PORT | UPF_FIXED_TYPE;
- if (of_find_property(np, "no-loopback-test", NULL))
+ if (of_property_read_bool(np, "no-loopback-test"))
port->flags |= UPF_SKIP_TEST;
port->dev = &ofdev->dev;
@@ -167,9 +173,13 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->handle_irq = fsl8250_handle_irq;
return 0;
-out:
- if (info->clk)
- clk_disable_unprepare(info->clk);
+err_dispose:
+ irq_dispose_mapping(port->irq);
+err_unprepare:
+ clk_disable_unprepare(info->clk);
+err_pmruntime:
+ pm_runtime_put_sync(&ofdev->dev);
+ pm_runtime_disable(&ofdev->dev);
return ret;
}
@@ -190,7 +200,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
if (!match)
return -EINVAL;
- if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
+ if (of_property_read_bool(ofdev->dev.of_node, "used-by-rtas"))
return -EBUSY;
info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -201,7 +211,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
memset(&port8250, 0, sizeof(port8250));
ret = of_platform_serial_setup(ofdev, port_type, &port8250.port, info);
if (ret)
- goto out;
+ goto err_free;
if (port8250.port.fifosize)
port8250.capabilities = UART_CAP_FIFO;
@@ -217,15 +227,19 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
ret = serial8250_register_8250_port(&port8250);
if (ret < 0)
- goto out;
+ goto err_dispose;
info->type = port_type;
info->line = ret;
platform_set_drvdata(ofdev, info);
return 0;
-out:
- kfree(info);
+err_dispose:
irq_dispose_mapping(port8250.port.irq);
+ pm_runtime_put_sync(&ofdev->dev);
+ pm_runtime_disable(&ofdev->dev);
+ clk_disable_unprepare(info->clk);
+err_free:
+ kfree(info);
return ret;
}
@@ -239,8 +253,9 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
serial8250_unregister_port(info->line);
reset_control_assert(info->rst);
- if (info->clk)
- clk_disable_unprepare(info->clk);
+ pm_runtime_put_sync(&ofdev->dev);
+ pm_runtime_disable(&ofdev->dev);
+ clk_disable_unprepare(info->clk);
kfree(info);
return 0;
}
@@ -254,9 +269,10 @@ static int of_serial_suspend(struct device *dev)
serial8250_suspend_port(info->line);
- if (info->clk && (!uart_console(port) || console_suspend_enabled))
+ if (!uart_console(port) || console_suspend_enabled) {
+ pm_runtime_put_sync(dev);
clk_disable_unprepare(info->clk);
-
+ }
return 0;
}
@@ -266,8 +282,10 @@ static int of_serial_resume(struct device *dev)
struct uart_8250_port *port8250 = serial8250_get_port(info->line);
struct uart_port *port = &port8250->port;
- if (info->clk && (!uart_console(port) || console_suspend_enabled))
+ if (!uart_console(port) || console_suspend_enabled) {
+ pm_runtime_get_sync(dev);
clk_prepare_enable(info->clk);
+ }
serial8250_resume_port(info->line);
@@ -295,6 +313,8 @@ static const struct of_device_id of_platform_serial_table[] = {
.data = (void *)PORT_ALTR_16550_F64, },
{ .compatible = "altr,16550-FIFO128",
.data = (void *)PORT_ALTR_16550_F128, },
+ { .compatible = "mediatek,mtk-btif",
+ .data = (void *)PORT_MTK_BTIF, },
{ .compatible = "mrvl,mmp-uart",
.data = (void *)PORT_XSCALE, },
{ .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, },
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 00e51a064388..0c101a7470b0 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1548,7 +1548,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
- port->port.flags |= UPF_NO_TXEN_TEST;
+ port->port.quirks |= UPQ_NO_TXEN_TEST;
dev_dbg(&priv->dev->dev,
"serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n",
priv->dev->vendor, priv->dev->device,
@@ -3384,17 +3384,8 @@ static const struct pci_device_id blacklist[] = {
{ PCI_VDEVICE(COMMTECH, PCI_ANY_ID), },
};
-/*
- * Given a complete unknown PCI device, try to use some heuristics to
- * guess what the configuration might be, based on the pitiful PCI
- * serial specs. Returns 0 on success, 1 on failure.
- */
-static int
-serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
+static int serial_pci_is_class_communication(struct pci_dev *dev)
{
- const struct pci_device_id *bldev;
- int num_iomem, num_port, first_port = -1, i;
-
/*
* If it is not a communications device or the programming
* interface is greater than 6, give up.
@@ -3407,6 +3398,13 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
(dev->class & 0xff) > 6)
return -ENODEV;
+ return 0;
+}
+
+static int serial_pci_is_blacklisted(struct pci_dev *dev)
+{
+ const struct pci_device_id *bldev;
+
/*
* Do not access blacklisted devices that are known not to
* feature serial ports or are handled by other modules.
@@ -3419,6 +3417,19 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
return -ENODEV;
}
+ return 0;
+}
+
+/*
+ * Given a complete unknown PCI device, try to use some heuristics to
+ * guess what the configuration might be, based on the pitiful PCI
+ * serial specs. Returns 0 on success, -ENODEV on failure.
+ */
+static int
+serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
+{
+ int num_iomem, num_port, first_port = -1, i;
+
num_iomem = num_port = 0;
for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
@@ -3639,6 +3650,14 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
board = &pci_boards[ent->driver_data];
+ rc = serial_pci_is_class_communication(dev);
+ if (rc)
+ return rc;
+
+ rc = serial_pci_is_blacklisted(dev);
+ if (rc)
+ return rc;
+
rc = pcim_enable_device(dev);
pci_save_state(dev);
if (rc)
@@ -3723,7 +3742,7 @@ static int pciserial_resume_one(struct device *dev)
static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one,
pciserial_resume_one);
-static struct pci_device_id serial_pci_tbl[] = {
+static const struct pci_device_id serial_pci_tbl[] = {
/* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
{ PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index a5fe0e66c607..f0cc04f62b67 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -37,7 +37,7 @@
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/pm_runtime.h>
-#include <linux/timer.h>
+#include <linux/ktime.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -289,6 +289,14 @@ static const struct serial8250_config uart_config[] = {
.rxtrig_bytes = {1, 4, 8, 14},
.flags = UART_CAP_FIFO | UART_CAP_AFE,
},
+ [PORT_MTK_BTIF] = {
+ .name = "MediaTek BTIF",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+ .flags = UART_CAP_FIFO,
+ },
};
/* Uart divisor latch read */
@@ -553,8 +561,8 @@ static inline void serial8250_em485_rts_after_send(struct uart_8250_port *p)
serial8250_out_MCR(p, mcr);
}
-static void serial8250_em485_handle_start_tx(unsigned long arg);
-static void serial8250_em485_handle_stop_tx(unsigned long arg);
+static enum hrtimer_restart serial8250_em485_handle_start_tx(struct hrtimer *t);
+static enum hrtimer_restart serial8250_em485_handle_stop_tx(struct hrtimer *t);
void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p)
{
@@ -609,12 +617,14 @@ int serial8250_em485_init(struct uart_8250_port *p)
if (!p->em485)
return -ENOMEM;
- setup_timer(&p->em485->stop_tx_timer,
- serial8250_em485_handle_stop_tx, (unsigned long)p);
- setup_timer(&p->em485->start_tx_timer,
- serial8250_em485_handle_start_tx, (unsigned long)p);
+ hrtimer_init(&p->em485->stop_tx_timer, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
+ hrtimer_init(&p->em485->start_tx_timer, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
+ p->em485->stop_tx_timer.function = &serial8250_em485_handle_stop_tx;
+ p->em485->start_tx_timer.function = &serial8250_em485_handle_start_tx;
+ p->em485->port = p;
p->em485->active_timer = NULL;
-
serial8250_em485_rts_after_send(p);
return 0;
@@ -639,8 +649,8 @@ void serial8250_em485_destroy(struct uart_8250_port *p)
if (!p->em485)
return;
- del_timer(&p->em485->start_tx_timer);
- del_timer(&p->em485->stop_tx_timer);
+ hrtimer_cancel(&p->em485->start_tx_timer);
+ hrtimer_cancel(&p->em485->stop_tx_timer);
kfree(p->em485);
p->em485 = NULL;
@@ -1435,22 +1445,33 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p)
serial_port_out(&p->port, UART_IER, p->ier);
}
}
-
-static void serial8250_em485_handle_stop_tx(unsigned long arg)
+static enum hrtimer_restart serial8250_em485_handle_stop_tx(struct hrtimer *t)
{
- struct uart_8250_port *p = (struct uart_8250_port *)arg;
- struct uart_8250_em485 *em485 = p->em485;
+ struct uart_8250_em485 *em485;
+ struct uart_8250_port *p;
unsigned long flags;
+ em485 = container_of(t, struct uart_8250_em485, stop_tx_timer);
+ p = em485->port;
+
serial8250_rpm_get(p);
spin_lock_irqsave(&p->port.lock, flags);
- if (em485 &&
- em485->active_timer == &em485->stop_tx_timer) {
+ if (em485->active_timer == &em485->stop_tx_timer) {
__do_stop_tx_rs485(p);
em485->active_timer = NULL;
}
spin_unlock_irqrestore(&p->port.lock, flags);
serial8250_rpm_put(p);
+ return HRTIMER_NORESTART;
+}
+
+static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec)
+{
+ long sec = msec / 1000;
+ long nsec = (msec % 1000) * 1000000;
+ ktime_t t = ktime_set(sec, nsec);
+
+ hrtimer_start(hrt, t, HRTIMER_MODE_REL);
}
static void __stop_tx_rs485(struct uart_8250_port *p)
@@ -1463,8 +1484,8 @@ static void __stop_tx_rs485(struct uart_8250_port *p)
*/
if (p->port.rs485.delay_rts_after_send > 0) {
em485->active_timer = &em485->stop_tx_timer;
- mod_timer(&em485->stop_tx_timer, jiffies +
- p->port.rs485.delay_rts_after_send * HZ / 1000);
+ start_hrtimer_ms(&em485->stop_tx_timer,
+ p->port.rs485.delay_rts_after_send);
} else {
__do_stop_tx_rs485(p);
}
@@ -1494,8 +1515,8 @@ static inline void __stop_tx(struct uart_8250_port *p)
if ((lsr & BOTH_EMPTY) != BOTH_EMPTY)
return;
- del_timer(&em485->start_tx_timer);
em485->active_timer = NULL;
+ hrtimer_cancel(&em485->start_tx_timer);
__stop_tx_rs485(p);
}
@@ -1558,8 +1579,9 @@ static inline void start_tx_rs485(struct uart_port *port)
if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
serial8250_stop_rx(&up->port);
- del_timer(&em485->stop_tx_timer);
em485->active_timer = NULL;
+ if (hrtimer_is_queued(&em485->stop_tx_timer))
+ hrtimer_cancel(&em485->stop_tx_timer);
mcr = serial8250_in_MCR(up);
if (!!(up->port.rs485.flags & SER_RS485_RTS_ON_SEND) !=
@@ -1572,8 +1594,8 @@ static inline void start_tx_rs485(struct uart_port *port)
if (up->port.rs485.delay_rts_before_send > 0) {
em485->active_timer = &em485->start_tx_timer;
- mod_timer(&em485->start_tx_timer, jiffies +
- up->port.rs485.delay_rts_before_send * HZ / 1000);
+ start_hrtimer_ms(&em485->start_tx_timer,
+ up->port.rs485.delay_rts_before_send);
return;
}
}
@@ -1581,19 +1603,22 @@ static inline void start_tx_rs485(struct uart_port *port)
__start_tx(port);
}
-static void serial8250_em485_handle_start_tx(unsigned long arg)
+static enum hrtimer_restart serial8250_em485_handle_start_tx(struct hrtimer *t)
{
- struct uart_8250_port *p = (struct uart_8250_port *)arg;
- struct uart_8250_em485 *em485 = p->em485;
+ struct uart_8250_em485 *em485;
+ struct uart_8250_port *p;
unsigned long flags;
+ em485 = container_of(t, struct uart_8250_em485, start_tx_timer);
+ p = em485->port;
+
spin_lock_irqsave(&p->port.lock, flags);
- if (em485 &&
- em485->active_timer == &em485->start_tx_timer) {
+ if (em485->active_timer == &em485->start_tx_timer) {
__start_tx(&p->port);
em485->active_timer = NULL;
}
spin_unlock_irqrestore(&p->port.lock, flags);
+ return HRTIMER_NORESTART;
}
static void serial8250_start_tx(struct uart_port *port)
@@ -2304,7 +2329,7 @@ int serial8250_do_startup(struct uart_port *port)
* test if we receive TX irq. This way, we'll never enable
* UART_BUG_TXEN.
*/
- if (up->port.flags & UPF_NO_TXEN_TEST)
+ if (up->port.quirks & UPQ_NO_TXEN_TEST)
goto dont_test_tx_en;
/*
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 746680ebf90c..8a10b10e27aa 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -29,12 +29,13 @@
* - MMIO32 (regshift = 2)
* - FCR is not at 2, but 3
* - LCR and MCR are not at 3 and 4, they share 4
+ * - No SCR (Instead, CHAR can be used as a scratch register)
* - Divisor latch at 9, no divisor latch access bit
*/
#define UNIPHIER_UART_REGSHIFT 2
-/* bit[15:8] = CHAR (not used), bit[7:0] = FCR */
+/* bit[15:8] = CHAR, bit[7:0] = FCR */
#define UNIPHIER_UART_CHAR_FCR (3 << (UNIPHIER_UART_REGSHIFT))
/* bit[15:8] = LCR, bit[7:0] = MCR */
#define UNIPHIER_UART_LCR_MCR (4 << (UNIPHIER_UART_REGSHIFT))
@@ -72,13 +73,18 @@ OF_EARLYCON_DECLARE(uniphier, "socionext,uniphier-uart",
/*
* The register map is slightly different from that of 8250.
- * IO callbacks must be overridden for correct access to FCR, LCR, and MCR.
+ * IO callbacks must be overridden for correct access to FCR, LCR, MCR and SCR.
*/
static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
{
unsigned int valshift = 0;
switch (offset) {
+ case UART_SCR:
+ /* No SCR for this hardware. Use CHAR as a scratch register */
+ valshift = 8;
+ offset = UNIPHIER_UART_CHAR_FCR;
+ break;
case UART_LCR:
valshift = 8;
/* fall through */
@@ -91,8 +97,8 @@ static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
}
/*
- * The return value must be masked with 0xff because LCR and MCR reside
- * in the same register that must be accessed by 32-bit write/read.
+ * The return value must be masked with 0xff because some registers
+ * share the same offset that must be accessed by 32-bit write/read.
* 8 or 16 bit access to this hardware result in unexpected behavior.
*/
return (readl(p->membase + offset) >> valshift) & 0xff;
@@ -101,9 +107,13 @@ static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
static void uniphier_serial_out(struct uart_port *p, int offset, int value)
{
unsigned int valshift = 0;
- bool normal = true;
+ bool normal = false;
switch (offset) {
+ case UART_SCR:
+ /* No SCR for this hardware. Use CHAR as a scratch register */
+ valshift = 8;
+ /* fall through */
case UART_FCR:
offset = UNIPHIER_UART_CHAR_FCR;
break;
@@ -114,10 +124,10 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value)
/* fall through */
case UART_MCR:
offset = UNIPHIER_UART_LCR_MCR;
- normal = false;
break;
default:
offset <<= UNIPHIER_UART_REGSHIFT;
+ normal = true;
break;
}
@@ -169,7 +179,7 @@ static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port,
dev_err(dev, "failed to get alias id\n");
return ret;
}
- port->line = priv->line = ret;
+ port->line = ret;
/* Get clk rate through clk driver */
priv->clk = devm_clk_get(dev, NULL);
@@ -249,8 +259,8 @@ static int uniphier_uart_probe(struct platform_device *pdev)
up.dl_read = uniphier_serial_dl_read;
up.dl_write = uniphier_serial_dl_write;
- ret = serial8250_register_8250_port(&up);
- if (ret < 0) {
+ priv->line = serial8250_register_8250_port(&up);
+ if (priv->line < 0) {
dev_err(dev, "failed to register 8250 port\n");
clk_disable_unprepare(priv->clk);
return ret;
@@ -271,6 +281,40 @@ static int uniphier_uart_remove(struct platform_device *pdev)
return 0;
}
+static int __maybe_unused uniphier_uart_suspend(struct device *dev)
+{
+ struct uniphier8250_priv *priv = dev_get_drvdata(dev);
+ struct uart_8250_port *up = serial8250_get_port(priv->line);
+
+ serial8250_suspend_port(priv->line);
+
+ if (!uart_console(&up->port) || console_suspend_enabled)
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static int __maybe_unused uniphier_uart_resume(struct device *dev)
+{
+ struct uniphier8250_priv *priv = dev_get_drvdata(dev);
+ struct uart_8250_port *up = serial8250_get_port(priv->line);
+ int ret;
+
+ if (!uart_console(&up->port) || console_suspend_enabled) {
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+ }
+
+ serial8250_resume_port(priv->line);
+
+ return 0;
+}
+
+static const struct dev_pm_ops uniphier_uart_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(uniphier_uart_suspend, uniphier_uart_resume)
+};
+
static const struct of_device_id uniphier_uart_match[] = {
{ .compatible = "socionext,uniphier-uart" },
{ /* sentinel */ }
@@ -283,6 +327,7 @@ static struct platform_driver uniphier_uart_platform_driver = {
.driver = {
.name = "uniphier-uart",
.of_match_table = uniphier_uart_match,
+ .pm = &uniphier_uart_pm_ops,
},
};
module_platform_driver(uniphier_uart_platform_driver);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index a1161ec0256f..a5c0ef1e7695 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -155,6 +155,17 @@ config SERIAL_8250_CS
If unsure, say N.
+config SERIAL_8250_MEN_MCB
+ tristate "MEN Z125 UART device support"
+ depends on MCB && SERIAL_8250
+ help
+ This enables support for FPGA based UARTs found on many MEN
+ boards. This driver enables support for the Z125 UARTs.
+
+ To compile this driver as a module, chose M here: the
+ module will be called 8250_men_mcb.
+
+
config SERIAL_8250_NR_UARTS
int "Maximum number of 8250/16550 serial ports"
depends on SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index a44a99a3e623..6a18d2d768fe 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
+obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1f096e2bb398..b788fee54249 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1689,7 +1689,7 @@ config SERIAL_MVEBU_CONSOLE
Otherwise, say 'N'.
config SERIAL_OWL
- bool "Actions Semi Owl serial port support"
+ tristate "Actions Semi Owl serial port support"
depends on ARCH_ACTIONS || COMPILE_TEST
select SERIAL_CORE
help
@@ -1705,7 +1705,7 @@ config SERIAL_OWL_CONSOLE
default y
help
Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
- as the system console. Only earlycon is implemented currently.
+ as the system console.
endmenu
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 24180adb1cbb..9ec4b8d2879f 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -814,7 +814,7 @@ static int pl010_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(pl010_dev_pm_ops, pl010_suspend, pl010_resume);
-static struct amba_id pl010_ids[] = {
+static const struct amba_id pl010_ids[] = {
{
.id = 0x00041010,
.mask = 0x000fffff,
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 1888d168a41c..111e6a950779 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -128,7 +128,7 @@ static struct vendor_data vendor_arm = {
.get_fifosize = get_fifosize_arm,
};
-static struct vendor_data vendor_sbsa = {
+static const struct vendor_data vendor_sbsa = {
.reg_offset = pl011_std_offsets,
.fr_busy = UART01x_FR_BUSY,
.fr_dsr = UART01x_FR_DSR,
@@ -143,7 +143,7 @@ static struct vendor_data vendor_sbsa = {
};
#ifdef CONFIG_ACPI_SPCR_TABLE
-static struct vendor_data vendor_qdt_qdf2400_e44 = {
+static const struct vendor_data vendor_qdt_qdf2400_e44 = {
.reg_offset = pl011_std_offsets,
.fr_busy = UART011_FR_TXFE,
.fr_dsr = UART01x_FR_DSR,
@@ -2787,7 +2787,7 @@ static struct platform_driver arm_sbsa_uart_platform_driver = {
},
};
-static struct amba_id pl011_ids[] = {
+static const struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
.mask = 0x000fffff,
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 75eb083b3361..dd60ed96a0ad 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -325,7 +325,7 @@ static int apbuart_verify_port(struct uart_port *port,
return ret;
}
-static struct uart_ops grlib_apbuart_ops = {
+static const struct uart_ops grlib_apbuart_ops = {
.tx_empty = apbuart_tx_empty,
.set_mctrl = apbuart_set_mctrl,
.get_mctrl = apbuart_get_mctrl,
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 5ac06fcaa9c6..77fe306690c4 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -549,8 +549,8 @@ static struct console arc_console = {
.data = &arc_uart_driver
};
-static __init void arc_early_serial_write(struct console *con, const char *s,
- unsigned int n)
+static void arc_early_serial_write(struct console *con, const char *s,
+ unsigned int n)
{
struct earlycon_device *dev = con->data;
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index f6bcc19c99d5..9ac142cfc1f1 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1123,7 +1123,7 @@ static void cpm_put_poll_char(struct uart_port *port,
}
#endif /* CONFIG_CONSOLE_POLL */
-static struct uart_ops cpm_uart_pops = {
+static const struct uart_ops cpm_uart_pops = {
.tx_empty = cpm_uart_tx_empty,
.set_mctrl = cpm_uart_set_mctrl,
.get_mctrl = cpm_uart_get_mctrl,
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index c3651540e1ba..98928f082d87 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -220,7 +220,7 @@ static int __init param_setup_earlycon(char *buf)
if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
earlycon_init_is_deferred = true;
return 0;
- } else {
+ } else if (!buf) {
return early_init_dt_scan_chosen_stdout();
}
}
@@ -282,7 +282,12 @@ int __init of_setup_earlycon(const struct earlycon_id *match,
}
}
+ val = of_get_flat_dt_prop(node, "current-speed", NULL);
+ if (val)
+ early_console_dev.baud = be32_to_cpu(*val);
+
if (options) {
+ early_console_dev.baud = simple_strtoul(options, NULL, 0);
strlcpy(early_console_dev.options, options,
sizeof(early_console_dev.options));
}
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 898dcb091a27..849c1f9991ce 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -117,7 +117,7 @@
#define UARTSFIFO_TXOF 0x02
#define UARTSFIFO_RXUF 0x01
-/* 32-bit register defination */
+/* 32-bit register definition */
#define UARTBAUD 0x00
#define UARTSTAT 0x04
#define UARTCTRL 0x08
@@ -521,6 +521,57 @@ static int lpuart_poll_get_char(struct uart_port *port)
return readb(port->membase + UARTDR);
}
+static int lpuart32_poll_init(struct uart_port *port)
+{
+ unsigned long flags;
+ struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ u32 temp;
+
+ sport->port.fifosize = 0;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ /* Disable Rx & Tx */
+ writel(0, sport->port.membase + UARTCTRL);
+
+ temp = readl(sport->port.membase + UARTFIFO);
+
+ /* Enable Rx and Tx FIFO */
+ writel(temp | UARTFIFO_RXFE | UARTFIFO_TXFE,
+ sport->port.membase + UARTFIFO);
+
+ /* flush Tx and Rx FIFO */
+ writel(UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH,
+ sport->port.membase + UARTFIFO);
+
+ /* explicitly clear RDRF */
+ if (readl(sport->port.membase + UARTSTAT) & UARTSTAT_RDRF) {
+ readl(sport->port.membase + UARTDATA);
+ writel(UARTFIFO_RXUF, sport->port.membase + UARTFIFO);
+ }
+
+ /* Enable Rx and Tx */
+ writel(UARTCTRL_RE | UARTCTRL_TE, sport->port.membase + UARTCTRL);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ return 0;
+}
+
+static void lpuart32_poll_put_char(struct uart_port *port, unsigned char c)
+{
+ while (!(readl(port->membase + UARTSTAT) & UARTSTAT_TDRE))
+ barrier();
+
+ writel(c, port->membase + UARTDATA);
+}
+
+static int lpuart32_poll_get_char(struct uart_port *port)
+{
+ if (!(readl(port->membase + UARTSTAT) & UARTSTAT_RDRF))
+ return NO_POLL_CHAR;
+
+ return readl(port->membase + UARTDATA);
+}
#endif
static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
@@ -1025,6 +1076,11 @@ static int lpuart_config_rs485(struct uart_port *port,
~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE);
writeb(modem, sport->port.membase + UARTMODEM);
+ /* clear unsupported configurations */
+ rs485->delay_rts_before_send = 0;
+ rs485->delay_rts_after_send = 0;
+ rs485->flags &= ~SER_RS485_RX_DURING_TX;
+
if (rs485->flags & SER_RS485_ENABLED) {
/* Enable auto RS-485 RTS mode */
modem |= UARTMODEM_TXRTSE;
@@ -1782,6 +1838,11 @@ static const struct uart_ops lpuart32_pops = {
.config_port = lpuart_config_port,
.verify_port = lpuart_verify_port,
.flush_buffer = lpuart_flush_buffer,
+#if defined(CONFIG_CONSOLE_POLL)
+ .poll_init = lpuart32_poll_init,
+ .poll_get_char = lpuart32_poll_get_char,
+ .poll_put_char = lpuart32_poll_put_char,
+#endif
};
static struct lpuart_port *lpuart_ports[UART_NR];
@@ -2203,6 +2264,7 @@ static int lpuart_suspend(struct device *dev)
{
struct lpuart_port *sport = dev_get_drvdata(dev);
unsigned long temp;
+ bool irq_wake;
if (lpuart_is_32(sport)) {
/* disable Rx/Tx and interrupts */
@@ -2218,6 +2280,9 @@ static int lpuart_suspend(struct device *dev)
uart_suspend_port(&lpuart_reg, &sport->port);
+ /* uart_suspend_port() might set wakeup flag */
+ irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq));
+
if (sport->lpuart_dma_rx_use) {
/*
* EDMA driver during suspend will forcefully release any
@@ -2226,7 +2291,7 @@ static int lpuart_suspend(struct device *dev)
* cannot resume as as expected, hence gracefully release the
* Rx DMA path before suspend and start Rx DMA path on resume.
*/
- if (sport->port.irq_wake) {
+ if (irq_wake) {
del_timer_sync(&sport->lpuart_timer);
lpuart_dma_rx_free(&sport->port);
}
@@ -2241,7 +2306,7 @@ static int lpuart_suspend(struct device *dev)
dmaengine_terminate_all(sport->dma_tx_chan);
}
- if (sport->port.suspended && !sport->port.irq_wake)
+ if (sport->port.suspended && !irq_wake)
clk_disable_unprepare(sport->clk);
return 0;
@@ -2250,9 +2315,10 @@ static int lpuart_suspend(struct device *dev)
static int lpuart_resume(struct device *dev)
{
struct lpuart_port *sport = dev_get_drvdata(dev);
+ bool irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq));
unsigned long temp;
- if (sport->port.suspended && !sport->port.irq_wake)
+ if (sport->port.suspended && !irq_wake)
clk_prepare_enable(sport->clk);
if (lpuart_is_32(sport)) {
@@ -2269,7 +2335,7 @@ static int lpuart_resume(struct device *dev)
}
if (sport->lpuart_dma_rx_use) {
- if (sport->port.irq_wake) {
+ if (irq_wake) {
if (!lpuart_start_rx_dma(sport))
rx_dma_timer_init(sport);
else
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 80934e7bd67f..dfeff3951f93 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -226,7 +226,6 @@ struct imx_port {
dma_cookie_t rx_cookie;
unsigned int tx_bytes;
unsigned int dma_tx_nents;
- wait_queue_head_t dma_wait;
unsigned int saved_reg[10];
bool context_saved;
};
@@ -458,7 +457,10 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
}
}
- while (!uart_circ_empty(xmit) && !sport->dma_is_txing &&
+ if (sport->dma_is_txing)
+ return;
+
+ while (!uart_circ_empty(xmit) &&
!(readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
* out the port here */
@@ -498,20 +500,12 @@ static void dma_tx_callback(void *data)
sport->dma_is_txing = 0;
- spin_unlock_irqrestore(&sport->port.lock, flags);
-
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&sport->port);
- if (waitqueue_active(&sport->dma_wait)) {
- wake_up(&sport->dma_wait);
- dev_dbg(sport->port.dev, "exit in %s.\n", __func__);
- return;
- }
-
- spin_lock_irqsave(&sport->port.lock, flags);
if (!uart_circ_empty(xmit) && !uart_tx_stopped(&sport->port))
imx_dma_tx(sport);
+
spin_unlock_irqrestore(&sport->port.lock, flags);
}
@@ -1208,8 +1202,6 @@ static void imx_enable_dma(struct imx_port *sport)
{
unsigned long temp;
- init_waitqueue_head(&sport->dma_wait);
-
/* set UCR1 */
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN;
@@ -2332,6 +2324,7 @@ static int imx_serial_port_suspend(struct device *dev)
serial_imx_enable_wakeup(sport, true);
uart_suspend_port(&imx_reg, &sport->port);
+ disable_irq(sport->port.irq);
/* Needed to enable clock in suspend_noirq */
return clk_prepare(sport->clk_ipg);
@@ -2346,6 +2339,7 @@ static int imx_serial_port_resume(struct device *dev)
serial_imx_enable_wakeup(sport, false);
uart_resume_port(&imx_reg, &sport->port);
+ enable_irq(sport->port.irq);
clk_unprepare(sport->clk_ipg);
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index a119f11bf2f4..102d499814ac 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -304,7 +304,7 @@ static void jsm_remove_one(struct pci_dev *pdev)
kfree(brd);
}
-static struct pci_device_id jsm_pci_tbl[] = {
+static const struct pci_device_id jsm_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9), 0, 0, 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index 218b7118e85d..5b3bd9511993 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -854,7 +854,7 @@ m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
return 0;
}
-static struct uart_ops m32r_sio_pops = {
+static const struct uart_ops m32r_sio_pops = {
.tx_empty = m32r_sio_tx_empty,
.set_mctrl = m32r_sio_set_mctrl,
.get_mctrl = m32r_sio_get_mctrl,
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 42e4a4c7597f..07c0f98be3ac 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -424,7 +424,7 @@ static void meson_uart_config_port(struct uart_port *port, int flags)
}
}
-static struct uart_ops meson_uart_ops = {
+static const struct uart_ops meson_uart_ops = {
.set_mctrl = meson_uart_set_mctrl,
.get_mctrl = meson_uart_get_mctrl,
.tx_empty = meson_uart_tx_empty,
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 3970d6a9aaca..791c4c74f6d6 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1347,7 +1347,7 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
}
-static struct uart_ops mpc52xx_uart_ops = {
+static const struct uart_ops mpc52xx_uart_ops = {
.tx_empty = mpc52xx_uart_tx_empty,
.set_mctrl = mpc52xx_uart_set_mctrl,
.get_mctrl = mpc52xx_uart_get_mctrl,
@@ -1634,8 +1634,8 @@ mpc52xx_console_setup(struct console *co, char *options)
return -EINVAL;
}
- pr_debug("Console on ttyPSC%x is %s\n",
- co->index, mpc52xx_uart_nodes[co->index]->full_name);
+ pr_debug("Console on ttyPSC%x is %pOF\n",
+ co->index, mpc52xx_uart_nodes[co->index]);
/* Fetch register locations */
ret = of_address_to_resource(np, 0, &res);
@@ -1755,8 +1755,8 @@ static int mpc52xx_uart_of_probe(struct platform_device *op)
break;
if (idx >= MPC52xx_PSC_MAXNUM)
return -EINVAL;
- pr_debug("Found %s assigned to ttyPSC%x\n",
- mpc52xx_uart_nodes[idx]->full_name, idx);
+ pr_debug("Found %pOF assigned to ttyPSC%x\n",
+ mpc52xx_uart_nodes[idx], idx);
/* set the uart clock to the input clock of the psc, the different
* prescalers are taken into account in the set_baudrate() methods
@@ -1881,8 +1881,8 @@ mpc52xx_uart_of_enumerate(void)
for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
if (mpc52xx_uart_nodes[i])
- pr_debug("%s assigned to ttyPSC%x\n",
- mpc52xx_uart_nodes[i]->full_name, i);
+ pr_debug("%pOF assigned to ttyPSC%x\n",
+ mpc52xx_uart_nodes[i], i);
}
}
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 6788e7532dff..1db79ee8a886 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1175,11 +1175,6 @@ static int msm_startup(struct uart_port *port)
snprintf(msm_port->name, sizeof(msm_port->name),
"msm_serial%d", port->line);
- ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH,
- msm_port->name, port);
- if (unlikely(ret))
- return ret;
-
msm_init_clock(port);
if (likely(port->fifosize > 12))
@@ -1206,7 +1201,21 @@ static int msm_startup(struct uart_port *port)
msm_request_rx_dma(msm_port, msm_port->uart.mapbase);
}
+ ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH,
+ msm_port->name, port);
+ if (unlikely(ret))
+ goto err_irq;
+
return 0;
+
+err_irq:
+ if (msm_port->is_uartdm)
+ msm_release_dma(msm_port);
+
+ clk_disable_unprepare(msm_port->pclk);
+ clk_disable_unprepare(msm_port->clk);
+
+ return ret;
}
static void msm_shutdown(struct uart_port *port)
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 6f14d2a547c4..2bff69e70e4b 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -427,7 +427,7 @@ static struct console mux_console = {
#define MUX_CONSOLE NULL
#endif
-static struct uart_ops mux_pops = {
+static const struct uart_ops mux_pops = {
.tx_empty = mux_tx_empty,
.set_mctrl = mux_set_mctrl,
.get_mctrl = mux_get_mctrl,
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 1ea05ac57aa7..7754053deeda 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1235,21 +1235,20 @@ out:
#ifdef CONFIG_SERIAL_OMAP_CONSOLE
#ifdef CONFIG_SERIAL_EARLYCON
-static unsigned int __init omap_serial_early_in(struct uart_port *port,
- int offset)
+static unsigned int omap_serial_early_in(struct uart_port *port, int offset)
{
offset <<= port->regshift;
return readw(port->membase + offset);
}
-static void __init omap_serial_early_out(struct uart_port *port, int offset,
- int value)
+static void omap_serial_early_out(struct uart_port *port, int offset,
+ int value)
{
offset <<= port->regshift;
writew(value, port->membase + offset);
}
-static void __init omap_serial_early_putc(struct uart_port *port, int c)
+static void omap_serial_early_putc(struct uart_port *port, int c)
{
unsigned int status;
@@ -1262,8 +1261,8 @@ static void __init omap_serial_early_putc(struct uart_port *port, int c)
omap_serial_early_out(port, UART_TX, c);
}
-static void __init early_omap_serial_write(struct console *console,
- const char *s, unsigned int count)
+static void early_omap_serial_write(struct console *console, const char *s,
+ unsigned int count)
{
struct earlycon_device *device = console->data;
struct uart_port *port = &device->port;
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index 1b8008797a1b..b9c859365334 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -20,6 +20,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/clk.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/io.h>
@@ -28,22 +29,66 @@
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#define OWL_UART_PORT_NUM 7
+#define OWL_UART_DEV_NAME "ttyOWL"
#define OWL_UART_CTL 0x000
+#define OWL_UART_RXDAT 0x004
#define OWL_UART_TXDAT 0x008
#define OWL_UART_STAT 0x00c
+#define OWL_UART_CTL_DWLS_MASK GENMASK(1, 0)
+#define OWL_UART_CTL_DWLS_5BITS (0x0 << 0)
+#define OWL_UART_CTL_DWLS_6BITS (0x1 << 0)
+#define OWL_UART_CTL_DWLS_7BITS (0x2 << 0)
+#define OWL_UART_CTL_DWLS_8BITS (0x3 << 0)
+#define OWL_UART_CTL_STPS_2BITS BIT(2)
+#define OWL_UART_CTL_PRS_MASK GENMASK(6, 4)
+#define OWL_UART_CTL_PRS_NONE (0x0 << 4)
+#define OWL_UART_CTL_PRS_ODD (0x4 << 4)
+#define OWL_UART_CTL_PRS_MARK (0x5 << 4)
+#define OWL_UART_CTL_PRS_EVEN (0x6 << 4)
+#define OWL_UART_CTL_PRS_SPACE (0x7 << 4)
+#define OWL_UART_CTL_AFE BIT(12)
#define OWL_UART_CTL_TRFS_TX BIT(14)
#define OWL_UART_CTL_EN BIT(15)
+#define OWL_UART_CTL_RXDE BIT(16)
+#define OWL_UART_CTL_TXDE BIT(17)
#define OWL_UART_CTL_RXIE BIT(18)
#define OWL_UART_CTL_TXIE BIT(19)
+#define OWL_UART_CTL_LBEN BIT(20)
#define OWL_UART_STAT_RIP BIT(0)
#define OWL_UART_STAT_TIP BIT(1)
+#define OWL_UART_STAT_RXER BIT(2)
+#define OWL_UART_STAT_TFER BIT(3)
+#define OWL_UART_STAT_RXST BIT(4)
+#define OWL_UART_STAT_RFEM BIT(5)
#define OWL_UART_STAT_TFFU BIT(6)
-#define OWL_UART_STAT_TRFL_MASK (0x1f << 11)
+#define OWL_UART_STAT_CTSS BIT(7)
+#define OWL_UART_STAT_RTSS BIT(8)
+#define OWL_UART_STAT_TFES BIT(10)
+#define OWL_UART_STAT_TRFL_MASK GENMASK(16, 11)
#define OWL_UART_STAT_UTBB BIT(17)
+static struct uart_driver owl_uart_driver;
+
+struct owl_uart_info {
+ unsigned int tx_fifosize;
+};
+
+struct owl_uart_port {
+ struct uart_port port;
+ struct clk *clk;
+};
+
+#define to_owl_uart_port(prt) container_of(prt, struct owl_uart_port, prt)
+
+static struct owl_uart_port *owl_uart_ports[OWL_UART_PORT_NUM];
+
static inline void owl_uart_write(struct uart_port *port, u32 val, unsigned int off)
{
writel(val, port->membase + off);
@@ -54,6 +99,397 @@ static inline u32 owl_uart_read(struct uart_port *port, unsigned int off)
return readl(port->membase + off);
}
+static void owl_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ u32 ctl;
+
+ ctl = owl_uart_read(port, OWL_UART_CTL);
+
+ if (mctrl & TIOCM_LOOP)
+ ctl |= OWL_UART_CTL_LBEN;
+ else
+ ctl &= ~OWL_UART_CTL_LBEN;
+
+ owl_uart_write(port, ctl, OWL_UART_CTL);
+}
+
+static unsigned int owl_uart_get_mctrl(struct uart_port *port)
+{
+ unsigned int mctrl = TIOCM_CAR | TIOCM_DSR;
+ u32 stat, ctl;
+
+ ctl = owl_uart_read(port, OWL_UART_CTL);
+ stat = owl_uart_read(port, OWL_UART_STAT);
+ if (stat & OWL_UART_STAT_RTSS)
+ mctrl |= TIOCM_RTS;
+ if ((stat & OWL_UART_STAT_CTSS) || !(ctl & OWL_UART_CTL_AFE))
+ mctrl |= TIOCM_CTS;
+ return mctrl;
+}
+
+static unsigned int owl_uart_tx_empty(struct uart_port *port)
+{
+ unsigned long flags;
+ u32 val;
+ unsigned int ret;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ val = owl_uart_read(port, OWL_UART_STAT);
+ ret = (val & OWL_UART_STAT_TFES) ? TIOCSER_TEMT : 0;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return ret;
+}
+
+static void owl_uart_stop_rx(struct uart_port *port)
+{
+ u32 val;
+
+ val = owl_uart_read(port, OWL_UART_CTL);
+ val &= ~(OWL_UART_CTL_RXIE | OWL_UART_CTL_RXDE);
+ owl_uart_write(port, val, OWL_UART_CTL);
+
+ val = owl_uart_read(port, OWL_UART_STAT);
+ val |= OWL_UART_STAT_RIP;
+ owl_uart_write(port, val, OWL_UART_STAT);
+}
+
+static void owl_uart_stop_tx(struct uart_port *port)
+{
+ u32 val;
+
+ val = owl_uart_read(port, OWL_UART_CTL);
+ val &= ~(OWL_UART_CTL_TXIE | OWL_UART_CTL_TXDE);
+ owl_uart_write(port, val, OWL_UART_CTL);
+
+ val = owl_uart_read(port, OWL_UART_STAT);
+ val |= OWL_UART_STAT_TIP;
+ owl_uart_write(port, val, OWL_UART_STAT);
+}
+
+static void owl_uart_start_tx(struct uart_port *port)
+{
+ u32 val;
+
+ if (uart_tx_stopped(port)) {
+ owl_uart_stop_tx(port);
+ return;
+ }
+
+ val = owl_uart_read(port, OWL_UART_STAT);
+ val |= OWL_UART_STAT_TIP;
+ owl_uart_write(port, val, OWL_UART_STAT);
+
+ val = owl_uart_read(port, OWL_UART_CTL);
+ val |= OWL_UART_CTL_TXIE;
+ owl_uart_write(port, val, OWL_UART_CTL);
+}
+
+static void owl_uart_send_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned int ch;
+
+ if (uart_tx_stopped(port))
+ return;
+
+ if (port->x_char) {
+ while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU))
+ cpu_relax();
+ owl_uart_write(port, port->x_char, OWL_UART_TXDAT);
+ port->icount.tx++;
+ port->x_char = 0;
+ }
+
+ while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)) {
+ if (uart_circ_empty(xmit))
+ break;
+
+ ch = xmit->buf[xmit->tail];
+ owl_uart_write(port, ch, OWL_UART_TXDAT);
+ xmit->tail = (xmit->tail + 1) & (SERIAL_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ owl_uart_stop_tx(port);
+}
+
+static void owl_uart_receive_chars(struct uart_port *port)
+{
+ u32 stat, val;
+
+ val = owl_uart_read(port, OWL_UART_CTL);
+ val &= ~OWL_UART_CTL_TRFS_TX;
+ owl_uart_write(port, val, OWL_UART_CTL);
+
+ stat = owl_uart_read(port, OWL_UART_STAT);
+ while (!(stat & OWL_UART_STAT_RFEM)) {
+ char flag = TTY_NORMAL;
+
+ if (stat & OWL_UART_STAT_RXER)
+ port->icount.overrun++;
+
+ if (stat & OWL_UART_STAT_RXST) {
+ /* We are not able to distinguish the error type. */
+ port->icount.brk++;
+ port->icount.frame++;
+
+ stat &= port->read_status_mask;
+ if (stat & OWL_UART_STAT_RXST)
+ flag = TTY_PARITY;
+ } else
+ port->icount.rx++;
+
+ val = owl_uart_read(port, OWL_UART_RXDAT);
+ val &= 0xff;
+
+ if ((stat & port->ignore_status_mask) == 0)
+ tty_insert_flip_char(&port->state->port, val, flag);
+
+ stat = owl_uart_read(port, OWL_UART_STAT);
+ }
+
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(&port->state->port);
+ spin_lock(&port->lock);
+}
+
+static irqreturn_t owl_uart_irq(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ unsigned long flags;
+ u32 stat;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ stat = owl_uart_read(port, OWL_UART_STAT);
+
+ if (stat & OWL_UART_STAT_RIP)
+ owl_uart_receive_chars(port);
+
+ if (stat & OWL_UART_STAT_TIP)
+ owl_uart_send_chars(port);
+
+ stat = owl_uart_read(port, OWL_UART_STAT);
+ stat |= OWL_UART_STAT_RIP | OWL_UART_STAT_TIP;
+ owl_uart_write(port, stat, OWL_UART_STAT);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void owl_uart_shutdown(struct uart_port *port)
+{
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ val = owl_uart_read(port, OWL_UART_CTL);
+ val &= ~(OWL_UART_CTL_TXIE | OWL_UART_CTL_RXIE
+ | OWL_UART_CTL_TXDE | OWL_UART_CTL_RXDE | OWL_UART_CTL_EN);
+ owl_uart_write(port, val, OWL_UART_CTL);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ free_irq(port->irq, port);
+}
+
+static int owl_uart_startup(struct uart_port *port)
+{
+ u32 val;
+ unsigned long flags;
+ int ret;
+
+ ret = request_irq(port->irq, owl_uart_irq, IRQF_TRIGGER_HIGH,
+ "owl-uart", port);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ val = owl_uart_read(port, OWL_UART_STAT);
+ val |= OWL_UART_STAT_RIP | OWL_UART_STAT_TIP
+ | OWL_UART_STAT_RXER | OWL_UART_STAT_TFER | OWL_UART_STAT_RXST;
+ owl_uart_write(port, val, OWL_UART_STAT);
+
+ val = owl_uart_read(port, OWL_UART_CTL);
+ val |= OWL_UART_CTL_RXIE | OWL_UART_CTL_TXIE;
+ val |= OWL_UART_CTL_EN;
+ owl_uart_write(port, val, OWL_UART_CTL);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 0;
+}
+
+static void owl_uart_change_baudrate(struct owl_uart_port *owl_port,
+ unsigned long baud)
+{
+ clk_set_rate(owl_port->clk, baud * 8);
+}
+
+static void owl_uart_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct owl_uart_port *owl_port = to_owl_uart_port(port);
+ unsigned int baud;
+ u32 ctl;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ ctl = owl_uart_read(port, OWL_UART_CTL);
+
+ ctl &= ~OWL_UART_CTL_DWLS_MASK;
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ ctl |= OWL_UART_CTL_DWLS_5BITS;
+ break;
+ case CS6:
+ ctl |= OWL_UART_CTL_DWLS_6BITS;
+ break;
+ case CS7:
+ ctl |= OWL_UART_CTL_DWLS_7BITS;
+ break;
+ case CS8:
+ default:
+ ctl |= OWL_UART_CTL_DWLS_8BITS;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ ctl |= OWL_UART_CTL_STPS_2BITS;
+ else
+ ctl &= ~OWL_UART_CTL_STPS_2BITS;
+
+ ctl &= ~OWL_UART_CTL_PRS_MASK;
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & CMSPAR) {
+ if (termios->c_cflag & PARODD)
+ ctl |= OWL_UART_CTL_PRS_MARK;
+ else
+ ctl |= OWL_UART_CTL_PRS_SPACE;
+ } else if (termios->c_cflag & PARODD)
+ ctl |= OWL_UART_CTL_PRS_ODD;
+ else
+ ctl |= OWL_UART_CTL_PRS_EVEN;
+ } else
+ ctl |= OWL_UART_CTL_PRS_NONE;
+
+ if (termios->c_cflag & CRTSCTS)
+ ctl |= OWL_UART_CTL_AFE;
+ else
+ ctl &= ~OWL_UART_CTL_AFE;
+
+ owl_uart_write(port, ctl, OWL_UART_CTL);
+
+ baud = uart_get_baud_rate(port, termios, old, 9600, 3200000);
+ owl_uart_change_baudrate(owl_port, baud);
+
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
+ port->read_status_mask |= OWL_UART_STAT_RXER;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= OWL_UART_STAT_RXST;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void owl_uart_release_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return;
+
+ if (port->flags & UPF_IOREMAP) {
+ devm_release_mem_region(port->dev, port->mapbase,
+ resource_size(res));
+ devm_iounmap(port->dev, port->membase);
+ port->membase = NULL;
+ }
+}
+
+static int owl_uart_request_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+
+ if (!devm_request_mem_region(port->dev, port->mapbase,
+ resource_size(res), dev_name(port->dev)))
+ return -EBUSY;
+
+ if (port->flags & UPF_IOREMAP) {
+ port->membase = devm_ioremap_nocache(port->dev, port->mapbase,
+ resource_size(res));
+ if (!port->membase)
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static const char *owl_uart_type(struct uart_port *port)
+{
+ return (port->type == PORT_OWL) ? "owl-uart" : NULL;
+}
+
+static int owl_uart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if (port->type != PORT_OWL)
+ return -EINVAL;
+
+ if (port->irq != ser->irq)
+ return -EINVAL;
+
+ return 0;
+}
+
+static void owl_uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_OWL;
+ owl_uart_request_port(port);
+ }
+}
+
+static const struct uart_ops owl_uart_ops = {
+ .set_mctrl = owl_uart_set_mctrl,
+ .get_mctrl = owl_uart_get_mctrl,
+ .tx_empty = owl_uart_tx_empty,
+ .start_tx = owl_uart_start_tx,
+ .stop_rx = owl_uart_stop_rx,
+ .stop_tx = owl_uart_stop_tx,
+ .startup = owl_uart_startup,
+ .shutdown = owl_uart_shutdown,
+ .set_termios = owl_uart_set_termios,
+ .type = owl_uart_type,
+ .config_port = owl_uart_config_port,
+ .request_port = owl_uart_request_port,
+ .release_port = owl_uart_release_port,
+ .verify_port = owl_uart_verify_port,
+};
+
#ifdef CONFIG_SERIAL_OWL_CONSOLE
static void owl_console_putchar(struct uart_port *port, int ch)
@@ -110,6 +546,57 @@ static void owl_uart_port_write(struct uart_port *port, const char *s,
local_irq_restore(flags);
}
+static void owl_uart_console_write(struct console *co, const char *s,
+ u_int count)
+{
+ struct owl_uart_port *owl_port;
+
+ owl_port = owl_uart_ports[co->index];
+ if (!owl_port)
+ return;
+
+ owl_uart_port_write(&owl_port->port, s, count);
+}
+
+static int owl_uart_console_setup(struct console *co, char *options)
+{
+ struct owl_uart_port *owl_port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index < 0 || co->index >= OWL_UART_PORT_NUM)
+ return -EINVAL;
+
+ owl_port = owl_uart_ports[co->index];
+ if (!owl_port || !owl_port->port.membase)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&owl_port->port, co, baud, parity, bits, flow);
+}
+
+static struct console owl_uart_console = {
+ .name = OWL_UART_DEV_NAME,
+ .write = owl_uart_console_write,
+ .device = uart_console_device,
+ .setup = owl_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &owl_uart_driver,
+};
+
+static int __init owl_uart_console_init(void)
+{
+ register_console(&owl_uart_console);
+
+ return 0;
+}
+console_initcall(owl_uart_console_init);
+
static void owl_uart_early_console_write(struct console *co,
const char *s,
u_int count)
@@ -132,4 +619,148 @@ owl_uart_early_console_setup(struct earlycon_device *device, const char *opt)
OF_EARLYCON_DECLARE(owl, "actions,owl-uart",
owl_uart_early_console_setup);
-#endif /* CONFIG_SERIAL_OWL_CONSOLE */
+#define OWL_UART_CONSOLE (&owl_uart_console)
+#else
+#define OWL_UART_CONSOLE NULL
+#endif
+
+static struct uart_driver owl_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "owl-uart",
+ .dev_name = OWL_UART_DEV_NAME,
+ .nr = OWL_UART_PORT_NUM,
+ .cons = OWL_UART_CONSOLE,
+};
+
+static const struct owl_uart_info owl_s500_info = {
+ .tx_fifosize = 16,
+};
+
+static const struct owl_uart_info owl_s900_info = {
+ .tx_fifosize = 32,
+};
+
+static const struct of_device_id owl_uart_dt_matches[] = {
+ { .compatible = "actions,s500-uart", .data = &owl_s500_info },
+ { .compatible = "actions,s900-uart", .data = &owl_s900_info },
+ { }
+};
+MODULE_DEVICE_TABLE(of, owl_uart_dt_matches);
+
+static int owl_uart_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ const struct owl_uart_info *info = NULL;
+ struct resource *res_mem;
+ struct owl_uart_port *owl_port;
+ int ret, irq;
+
+ if (pdev->dev.of_node) {
+ pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
+ match = of_match_node(owl_uart_dt_matches, pdev->dev.of_node);
+ if (match)
+ info = match->data;
+ }
+
+ if (pdev->id < 0 || pdev->id >= OWL_UART_PORT_NUM) {
+ dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
+ return -EINVAL;
+ }
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res_mem) {
+ dev_err(&pdev->dev, "could not get mem\n");
+ return -ENODEV;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "could not get irq\n");
+ return irq;
+ }
+
+ if (owl_uart_ports[pdev->id]) {
+ dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);
+ return -EBUSY;
+ }
+
+ owl_port = devm_kzalloc(&pdev->dev, sizeof(*owl_port), GFP_KERNEL);
+ if (!owl_port)
+ return -ENOMEM;
+
+ owl_port->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(owl_port->clk)) {
+ dev_err(&pdev->dev, "could not get clk\n");
+ return PTR_ERR(owl_port->clk);
+ }
+
+ owl_port->port.dev = &pdev->dev;
+ owl_port->port.line = pdev->id;
+ owl_port->port.type = PORT_OWL;
+ owl_port->port.iotype = UPIO_MEM;
+ owl_port->port.mapbase = res_mem->start;
+ owl_port->port.irq = irq;
+ owl_port->port.uartclk = clk_get_rate(owl_port->clk);
+ if (owl_port->port.uartclk == 0) {
+ dev_err(&pdev->dev, "clock rate is zero\n");
+ return -EINVAL;
+ }
+ owl_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY;
+ owl_port->port.x_char = 0;
+ owl_port->port.fifosize = (info) ? info->tx_fifosize : 16;
+ owl_port->port.ops = &owl_uart_ops;
+
+ owl_uart_ports[pdev->id] = owl_port;
+ platform_set_drvdata(pdev, owl_port);
+
+ ret = uart_add_one_port(&owl_uart_driver, &owl_port->port);
+ if (ret)
+ owl_uart_ports[pdev->id] = NULL;
+
+ return ret;
+}
+
+static int owl_uart_remove(struct platform_device *pdev)
+{
+ struct owl_uart_port *owl_port = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&owl_uart_driver, &owl_port->port);
+ owl_uart_ports[pdev->id] = NULL;
+
+ return 0;
+}
+
+static struct platform_driver owl_uart_platform_driver = {
+ .probe = owl_uart_probe,
+ .remove = owl_uart_remove,
+ .driver = {
+ .name = "owl-uart",
+ .of_match_table = owl_uart_dt_matches,
+ },
+};
+
+static int __init owl_uart_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&owl_uart_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&owl_uart_platform_driver);
+ if (ret)
+ uart_unregister_driver(&owl_uart_driver);
+
+ return ret;
+}
+
+static void __init owl_uart_exit(void)
+{
+ platform_driver_unregister(&owl_uart_platform_driver);
+ uart_unregister_driver(&owl_uart_driver);
+}
+
+module_init(owl_uart_init);
+module_exit(owl_uart_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index d3796dc26fa9..ae8cfc81ffc5 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -46,11 +46,6 @@ enum {
PCH_UART_HANDLED_LS_INT_SHIFT,
};
-enum {
- PCH_UART_8LINE,
- PCH_UART_2LINE,
-};
-
#define PCH_UART_DRIVER_DEVICE "ttyPCH"
/* Set the max number of UART port
@@ -267,7 +262,7 @@ struct eg20t_port {
/**
* struct pch_uart_driver_data - private data structure for UART-DMA
- * @port_type: The number of DMA channel
+ * @port_type: The type of UART port
* @line_no: UART port line number (0, 1, 2...)
*/
struct pch_uart_driver_data {
@@ -290,17 +285,17 @@ enum pch_uart_num_t {
};
static struct pch_uart_driver_data drv_dat[] = {
- [pch_et20t_uart0] = {PCH_UART_8LINE, 0},
- [pch_et20t_uart1] = {PCH_UART_2LINE, 1},
- [pch_et20t_uart2] = {PCH_UART_2LINE, 2},
- [pch_et20t_uart3] = {PCH_UART_2LINE, 3},
- [pch_ml7213_uart0] = {PCH_UART_8LINE, 0},
- [pch_ml7213_uart1] = {PCH_UART_2LINE, 1},
- [pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
- [pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
- [pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
- [pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
- [pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
+ [pch_et20t_uart0] = {PORT_PCH_8LINE, 0},
+ [pch_et20t_uart1] = {PORT_PCH_2LINE, 1},
+ [pch_et20t_uart2] = {PORT_PCH_2LINE, 2},
+ [pch_et20t_uart3] = {PORT_PCH_2LINE, 3},
+ [pch_ml7213_uart0] = {PORT_PCH_8LINE, 0},
+ [pch_ml7213_uart1] = {PORT_PCH_2LINE, 1},
+ [pch_ml7213_uart2] = {PORT_PCH_2LINE, 2},
+ [pch_ml7223_uart0] = {PORT_PCH_8LINE, 0},
+ [pch_ml7223_uart1] = {PORT_PCH_2LINE, 1},
+ [pch_ml7831_uart0] = {PORT_PCH_8LINE, 0},
+ [pch_ml7831_uart1] = {PORT_PCH_2LINE, 1},
};
#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
@@ -1777,10 +1772,10 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
goto init_port_free_txbuf;
switch (port_type) {
- case PORT_UNKNOWN:
+ case PORT_PCH_8LINE:
fifosize = 256; /* EG20T/ML7213: UART0 */
break;
- case PORT_8250:
+ case PORT_PCH_2LINE:
fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/
break;
default:
@@ -1804,7 +1799,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
priv->fifo_size = fifosize;
priv->uartclk = pch_uart_get_uartclk();
- priv->port_type = PORT_MAX_8250 + port_type + 1;
+ priv->port_type = port_type;
priv->port.dev = &pdev->dev;
priv->port.iobase = iobase;
priv->port.membase = NULL;
@@ -1862,8 +1857,7 @@ static void pch_uart_exit_port(struct eg20t_port *priv)
{
#ifdef CONFIG_DEBUG_FS
- if (priv->debugfs)
- debugfs_remove(priv->debugfs);
+ debugfs_remove(priv->debugfs);
#endif
uart_remove_one_port(&pch_uart_driver, &priv->port);
free_page((unsigned long)priv->rxbuf.buf);
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 0da52947e59e..6ccdd018fb45 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1671,8 +1671,8 @@ static int __init pmz_probe(void)
if (!node_a && !node_b) {
of_node_put(node_a);
of_node_put(node_b);
- printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n",
- (!node_a) ? 'a' : 'b', node_p->full_name);
+ printk(KERN_ERR "pmac_zilog: missing node %c for escc %pOF\n",
+ (!node_a) ? 'a' : 'b', node_p);
continue;
}
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index d92a150c8733..cf9b736f26f8 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1310,7 +1310,7 @@ static int tegra_uart_probe(struct platform_device *pdev)
return PTR_ERR(tup->uart_clk);
}
- tup->rst = devm_reset_control_get(&pdev->dev, "serial");
+ tup->rst = devm_reset_control_get_exclusive(&pdev->dev, "serial");
if (IS_ERR(tup->rst)) {
dev_err(&pdev->dev, "Couldn't get the reset\n");
return PTR_ERR(tup->rst);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f534a40aebde..3a14cccbd7ff 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -36,7 +36,7 @@
#include <linux/delay.h>
#include <linux/mutex.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <linux/uaccess.h>
/*
@@ -165,6 +165,27 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
#define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0)
#define uart_clear_mctrl(port, clear) uart_update_mctrl(port, 0, clear)
+static void uart_port_dtr_rts(struct uart_port *uport, int raise)
+{
+ int rs485_on = uport->rs485_config &&
+ (uport->rs485.flags & SER_RS485_ENABLED);
+ int RTS_after_send = !!(uport->rs485.flags & SER_RS485_RTS_AFTER_SEND);
+
+ if (raise) {
+ if (rs485_on && !RTS_after_send) {
+ uart_set_mctrl(uport, TIOCM_DTR);
+ uart_clear_mctrl(uport, TIOCM_RTS);
+ } else {
+ uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
+ }
+ } else {
+ unsigned int clear = TIOCM_DTR;
+
+ clear |= (!rs485_on || !RTS_after_send) ? TIOCM_RTS : 0;
+ uart_clear_mctrl(uport, clear);
+ }
+}
+
/*
* Startup the port. This will be called once per open. All calls
* will be serialised by the per-port mutex.
@@ -214,7 +235,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
* port is open and ready to respond.
*/
if (init_hw && C_BAUD(tty))
- uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
+ uart_port_dtr_rts(uport, 1);
}
/*
@@ -272,7 +293,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
uport->cons->cflag = tty->termios.c_cflag;
if (!tty || C_HUPCL(tty))
- uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
+ uart_port_dtr_rts(uport, 0);
uart_port_shutdown(port);
}
@@ -744,7 +765,7 @@ static int uart_get_info(struct tty_port *port, struct serial_struct *retinfo)
if (HIGH_BITS_OFFSET)
retinfo->port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
retinfo->irq = uport->irq;
- retinfo->flags = uport->flags;
+ retinfo->flags = (__force int)uport->flags;
retinfo->xmit_fifo_size = uport->fifosize;
retinfo->baud_base = uport->uartclk / 16;
retinfo->close_delay = jiffies_to_msecs(port->close_delay) / 10;
@@ -818,7 +839,7 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
new_info->type != uport->type);
old_flags = uport->flags;
- new_flags = new_info->flags;
+ new_flags = (__force upf_t)new_info->flags;
old_custom_divisor = uport->custom_divisor;
if (!capable(CAP_SYS_ADMIN)) {
@@ -1658,7 +1679,7 @@ static int uart_carrier_raised(struct tty_port *port)
return 0;
}
-static void uart_dtr_rts(struct tty_port *port, int onoff)
+static void uart_dtr_rts(struct tty_port *port, int raise)
{
struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport;
@@ -1666,12 +1687,7 @@ static void uart_dtr_rts(struct tty_port *port, int onoff)
uport = uart_port_ref(state);
if (!uport)
return;
-
- if (onoff)
- uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
- else
- uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
-
+ uart_port_dtr_rts(uport, raise);
uart_port_deref(uport);
}
@@ -2083,8 +2099,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (tty_dev && device_may_wakeup(tty_dev)) {
- if (!enable_irq_wake(uport->irq))
- uport->irq_wake = 1;
+ enable_irq_wake(uport->irq);
put_device(tty_dev);
mutex_unlock(&port->mutex);
return 0;
@@ -2147,10 +2162,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (!uport->suspended && device_may_wakeup(tty_dev)) {
- if (uport->irq_wake) {
+ if (irqd_is_wakeup_set(irq_get_irq_data((uport->irq))))
disable_irq_wake(uport->irq);
- uport->irq_wake = 0;
- }
put_device(tty_dev);
mutex_unlock(&port->mutex);
return 0;
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index e08b16b070c0..784dd42002ea 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -3073,8 +3073,7 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
p->type = SCI_OF_TYPE(match->data);
p->regtype = SCI_OF_REGTYPE(match->data);
- if (of_find_property(np, "uart-has-rtscts", NULL))
- sp->has_rtscts = true;
+ sp->has_rtscts = of_property_read_bool(np, "uart-has-rtscts");
return p;
}
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 90996ad97b37..e902494ebbd5 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -63,6 +63,7 @@
/* interrupt clear register */
#define SPRD_ICLR 0x0014
+#define SPRD_ICLR_TIMEOUT BIT(13)
/* line control register */
#define SPRD_LCR 0x0018
@@ -298,7 +299,8 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
return IRQ_NONE;
}
- serial_out(port, SPRD_ICLR, ~0);
+ if (ims & SPRD_IMSR_TIMEOUT)
+ serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT);
if (ims & (SPRD_IMSR_RX_FIFO_FULL |
SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT))
@@ -729,8 +731,8 @@ static int sprd_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(&pdev->dev, "not provide irq resource\n");
- return -ENODEV;
+ dev_err(&pdev->dev, "not provide irq resource: %d\n", irq);
+ return irq;
}
up->irq = irq;
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index 6b0ca65027d0..b313a792b149 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -310,7 +310,7 @@ static void asc_receive_chars(struct uart_port *port)
if (mode == ASC_CTL_MODE_8BIT || mode == ASC_CTL_MODE_8BIT_PAR)
ignore_pe = true;
- if (port->irq_wake)
+ if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
pm_wakeup_event(tport->tty->dev, 0);
while ((status = asc_in(port, ASC_STA)) & ASC_STA_RBF) {
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 033856287ca2..03a583264d9e 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) Maxime Coquelin 2015
+ * Copyright (C) STMicroelectronics SA 2017
* Authors: Maxime Coquelin <mcoquelin.stm32@gmail.com>
* Gerald Baeza <gerald.baeza@st.com>
* License terms: GNU General Public License (GPL), version 2
@@ -25,6 +26,7 @@
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/spinlock.h>
@@ -110,14 +112,13 @@ static void stm32_receive_chars(struct uart_port *port, bool threaded)
unsigned long c;
u32 sr;
char flag;
- static int last_res = RX_BUF_L;
- if (port->irq_wake)
+ if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
pm_wakeup_event(tport->tty->dev, 0);
- while (stm32_pending_rx(port, &sr, &last_res, threaded)) {
+ while (stm32_pending_rx(port, &sr, &stm32_port->last_res, threaded)) {
sr |= USART_SR_DUMMY_RX;
- c = stm32_get_char(port, &sr, &last_res);
+ c = stm32_get_char(port, &sr, &stm32_port->last_res);
flag = TTY_NORMAL;
port->icount.rx++;
@@ -202,7 +203,7 @@ static void stm32_transmit_chars_pio(struct uart_port *port)
ret = readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
isr,
(isr & USART_SR_TXE),
- 10, 100);
+ 10, 100000);
if (ret)
dev_err(port->dev, "tx empty not set\n");
@@ -326,6 +327,10 @@ static irqreturn_t stm32_interrupt(int irq, void *ptr)
sr = readl_relaxed(port->membase + ofs->isr);
+ if ((sr & USART_SR_WUF) && (ofs->icr != UNDEF_REG))
+ writel_relaxed(USART_ICR_WUCF,
+ port->membase + ofs->icr);
+
if ((sr & USART_SR_RXNE) && !(stm32_port->rx_ch))
stm32_receive_chars(port, false);
@@ -442,6 +447,7 @@ static int stm32_startup(struct uart_port *port)
{
struct stm32_port *stm32_port = to_stm32_port(port);
struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+ struct stm32_usart_config *cfg = &stm32_port->info->cfg;
const char *name = to_platform_device(port->dev)->name;
u32 val;
int ret;
@@ -452,7 +458,18 @@ static int stm32_startup(struct uart_port *port)
if (ret)
return ret;
+ if (cfg->has_wakeup && stm32_port->wakeirq >= 0) {
+ ret = dev_pm_set_dedicated_wake_irq(port->dev,
+ stm32_port->wakeirq);
+ if (ret) {
+ free_irq(port->irq, port);
+ return ret;
+ }
+ }
+
val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
+ if (stm32_port->fifoen)
+ val |= USART_CR1_FIFOEN;
stm32_set_bits(port, ofs->cr1, val);
return 0;
@@ -467,8 +484,11 @@ static void stm32_shutdown(struct uart_port *port)
val = USART_CR1_TXEIE | USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
val |= BIT(cfg->uart_enable_bit);
+ if (stm32_port->fifoen)
+ val |= USART_CR1_FIFOEN;
stm32_clr_bits(port, ofs->cr1, val);
+ dev_pm_clear_wake_irq(port->dev);
free_irq(port->irq, port);
}
@@ -496,6 +516,8 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_RXNEIE;
cr1 |= BIT(cfg->uart_enable_bit);
+ if (stm32_port->fifoen)
+ cr1 |= USART_CR1_FIFOEN;
cr2 = 0;
cr3 = 0;
@@ -518,7 +540,7 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
if (cflag & CRTSCTS) {
port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
- cr3 |= USART_CR3_CTSE;
+ cr3 |= USART_CR3_CTSE | USART_CR3_RTSE;
}
usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
@@ -659,6 +681,8 @@ static int stm32_init_port(struct stm32_port *stm32port,
port->ops = &stm32_uart_ops;
port->dev = &pdev->dev;
port->irq = platform_get_irq(pdev, 0);
+ stm32port->wakeirq = platform_get_irq(pdev, 1);
+ stm32port->fifoen = stm32port->info->cfg.has_fifo;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
port->membase = devm_ioremap_resource(&pdev->dev, res);
@@ -678,8 +702,10 @@ static int stm32_init_port(struct stm32_port *stm32port,
return ret;
stm32port->port.uartclk = clk_get_rate(stm32port->clk);
- if (!stm32port->port.uartclk)
+ if (!stm32port->port.uartclk) {
+ clk_disable_unprepare(stm32port->clk);
ret = -EINVAL;
+ }
return ret;
}
@@ -693,8 +719,10 @@ static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)
return NULL;
id = of_alias_get_id(np, "serial");
- if (id < 0)
- id = 0;
+ if (id < 0) {
+ dev_err(&pdev->dev, "failed to get alias id, errno %d\n", id);
+ return NULL;
+ }
if (WARN_ON(id >= STM32_MAX_PORTS))
return NULL;
@@ -702,6 +730,7 @@ static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)
stm32_ports[id].hw_flow_control = of_property_read_bool(np,
"st,hw-flow-ctrl");
stm32_ports[id].port.line = id;
+ stm32_ports[id].last_res = RX_BUF_L;
return &stm32_ports[id];
}
@@ -711,6 +740,8 @@ static const struct of_device_id stm32_match[] = {
{ .compatible = "st,stm32-uart", .data = &stm32f4_info},
{ .compatible = "st,stm32f7-usart", .data = &stm32f7_info},
{ .compatible = "st,stm32f7-uart", .data = &stm32f7_info},
+ { .compatible = "st,stm32h7-usart", .data = &stm32h7_info},
+ { .compatible = "st,stm32h7-uart", .data = &stm32h7_info},
{},
};
@@ -860,9 +891,15 @@ static int stm32_serial_probe(struct platform_device *pdev)
if (ret)
return ret;
+ if (stm32port->info->cfg.has_wakeup && stm32port->wakeirq >= 0) {
+ ret = device_init_wakeup(&pdev->dev, true);
+ if (ret)
+ goto err_uninit;
+ }
+
ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
if (ret)
- return ret;
+ goto err_nowup;
ret = stm32_of_dma_rx_probe(stm32port, pdev);
if (ret)
@@ -875,6 +912,15 @@ static int stm32_serial_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, &stm32port->port);
return 0;
+
+err_nowup:
+ if (stm32port->info->cfg.has_wakeup && stm32port->wakeirq >= 0)
+ device_init_wakeup(&pdev->dev, false);
+
+err_uninit:
+ clk_disable_unprepare(stm32port->clk);
+
+ return ret;
}
static int stm32_serial_remove(struct platform_device *pdev)
@@ -882,6 +928,7 @@ static int stm32_serial_remove(struct platform_device *pdev)
struct uart_port *port = platform_get_drvdata(pdev);
struct stm32_port *stm32_port = to_stm32_port(port);
struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+ struct stm32_usart_config *cfg = &stm32_port->info->cfg;
stm32_clr_bits(port, ofs->cr3, USART_CR3_DMAR);
@@ -903,6 +950,9 @@ static int stm32_serial_remove(struct platform_device *pdev)
TX_BUF_L, stm32_port->tx_buf,
stm32_port->tx_dma_buf);
+ if (cfg->has_wakeup && stm32_port->wakeirq >= 0)
+ device_init_wakeup(&pdev->dev, false);
+
clk_disable_unprepare(stm32_port->clk);
return uart_remove_one_port(&stm32_usart_driver, port);
@@ -1008,11 +1058,66 @@ static struct uart_driver stm32_usart_driver = {
.cons = STM32_SERIAL_CONSOLE,
};
+#ifdef CONFIG_PM_SLEEP
+static void stm32_serial_enable_wakeup(struct uart_port *port, bool enable)
+{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+ struct stm32_usart_config *cfg = &stm32_port->info->cfg;
+ u32 val;
+
+ if (!cfg->has_wakeup || stm32_port->wakeirq < 0)
+ return;
+
+ if (enable) {
+ stm32_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
+ stm32_set_bits(port, ofs->cr1, USART_CR1_UESM);
+ val = readl_relaxed(port->membase + ofs->cr3);
+ val &= ~USART_CR3_WUS_MASK;
+ /* Enable Wake up interrupt from low power on start bit */
+ val |= USART_CR3_WUS_START_BIT | USART_CR3_WUFIE;
+ writel_relaxed(val, port->membase + ofs->cr3);
+ stm32_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
+ } else {
+ stm32_clr_bits(port, ofs->cr1, USART_CR1_UESM);
+ }
+}
+
+static int stm32_serial_suspend(struct device *dev)
+{
+ struct uart_port *port = dev_get_drvdata(dev);
+
+ uart_suspend_port(&stm32_usart_driver, port);
+
+ if (device_may_wakeup(dev))
+ stm32_serial_enable_wakeup(port, true);
+ else
+ stm32_serial_enable_wakeup(port, false);
+
+ return 0;
+}
+
+static int stm32_serial_resume(struct device *dev)
+{
+ struct uart_port *port = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ stm32_serial_enable_wakeup(port, false);
+
+ return uart_resume_port(&stm32_usart_driver, port);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops stm32_serial_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(stm32_serial_suspend, stm32_serial_resume)
+};
+
static struct platform_driver stm32_serial_driver = {
.probe = stm32_serial_probe,
.remove = stm32_serial_remove,
.driver = {
.name = DRIVER_NAME,
+ .pm = &stm32_serial_pm_ops,
.of_match_table = of_match_ptr(stm32_match),
},
};
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index cd97ceb76e4f..ffc0c5285e51 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -1,5 +1,6 @@
/*
* Copyright (C) Maxime Coquelin 2015
+ * Copyright (C) STMicroelectronics SA 2017
* Authors: Maxime Coquelin <mcoquelin.stm32@gmail.com>
* Gerald Baeza <gerald_baeza@yahoo.fr>
* License terms: GNU General Public License (GPL), version 2
@@ -24,6 +25,8 @@ struct stm32_usart_offsets {
struct stm32_usart_config {
u8 uart_enable_bit; /* USART_CR1_UE */
bool has_7bits_data;
+ bool has_wakeup;
+ bool has_fifo;
};
struct stm32_usart_info {
@@ -74,6 +77,28 @@ struct stm32_usart_info stm32f7_info = {
}
};
+struct stm32_usart_info stm32h7_info = {
+ .ofs = {
+ .cr1 = 0x00,
+ .cr2 = 0x04,
+ .cr3 = 0x08,
+ .brr = 0x0c,
+ .gtpr = 0x10,
+ .rtor = 0x14,
+ .rqr = 0x18,
+ .isr = 0x1c,
+ .icr = 0x20,
+ .rdr = 0x24,
+ .tdr = 0x28,
+ },
+ .cfg = {
+ .uart_enable_bit = 0,
+ .has_7bits_data = true,
+ .has_wakeup = true,
+ .has_fifo = true,
+ }
+};
+
/* USART_SR (F4) / USART_ISR (F7) */
#define USART_SR_PE BIT(0)
#define USART_SR_FE BIT(1)
@@ -93,6 +118,7 @@ struct stm32_usart_info stm32f7_info = {
#define USART_SR_BUSY BIT(16) /* F7 */
#define USART_SR_CMF BIT(17) /* F7 */
#define USART_SR_SBKF BIT(18) /* F7 */
+#define USART_SR_WUF BIT(20) /* H7 */
#define USART_SR_TEACK BIT(21) /* F7 */
#define USART_SR_ERR_MASK (USART_SR_LBD | USART_SR_ORE | \
USART_SR_FE | USART_SR_PE)
@@ -113,6 +139,7 @@ struct stm32_usart_info stm32f7_info = {
/* USART_CR1 */
#define USART_CR1_SBK BIT(0)
#define USART_CR1_RWU BIT(1) /* F4 */
+#define USART_CR1_UESM BIT(1) /* H7 */
#define USART_CR1_RE BIT(2)
#define USART_CR1_TE BIT(3)
#define USART_CR1_IDLEIE BIT(4)
@@ -134,6 +161,7 @@ struct stm32_usart_info stm32f7_info = {
#define USART_CR1_EOBIE BIT(27) /* F7 */
#define USART_CR1_M1 BIT(28) /* F7 */
#define USART_CR1_IE_MASK (GENMASK(8, 4) | BIT(14) | BIT(26) | BIT(27))
+#define USART_CR1_FIFOEN BIT(29) /* H7 */
/* USART_CR2 */
#define USART_CR2_ADD_MASK GENMASK(3, 0) /* F4 */
@@ -175,6 +203,9 @@ struct stm32_usart_info stm32f7_info = {
#define USART_CR3_DEM BIT(14) /* F7 */
#define USART_CR3_DEP BIT(15) /* F7 */
#define USART_CR3_SCARCNT_MASK GENMASK(19, 17) /* F7 */
+#define USART_CR3_WUS_MASK GENMASK(21, 20) /* H7 */
+#define USART_CR3_WUS_START_BIT BIT(21) /* H7 */
+#define USART_CR3_WUFIE BIT(22) /* H7 */
/* USART_GTPR */
#define USART_GTPR_PSC_MASK GENMASK(7, 0)
@@ -203,9 +234,10 @@ struct stm32_usart_info stm32f7_info = {
#define USART_ICR_RTOCF BIT(11) /* F7 */
#define USART_ICR_EOBCF BIT(12) /* F7 */
#define USART_ICR_CMCF BIT(17) /* F7 */
+#define USART_ICR_WUCF BIT(20) /* H7 */
#define STM32_SERIAL_NAME "ttyS"
-#define STM32_MAX_PORTS 6
+#define STM32_MAX_PORTS 8
#define RX_BUF_L 200 /* dma rx buffer length */
#define RX_BUF_P RX_BUF_L /* dma rx buffer period */
@@ -221,8 +253,11 @@ struct stm32_port {
struct dma_chan *tx_ch; /* dma tx channel */
dma_addr_t tx_dma_buf; /* dma tx buffer bus address */
unsigned char *tx_buf; /* dma tx buffer cpu address */
+ int last_res;
bool tx_dma_busy; /* dma tx busy */
bool hw_flow_control;
+ bool fifoen;
+ int wakeirq;
};
static struct stm32_port stm32_ports[STM32_MAX_PORTS];
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index b5e3195b3697..653a076d89d3 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -819,7 +819,7 @@ static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser)
return -EINVAL;
}
-static struct uart_ops sunsab_pops = {
+static const struct uart_ops sunsab_pops = {
.tx_empty = sunsab_tx_empty,
.set_mctrl = sunsab_set_mctrl,
.get_mctrl = sunsab_get_mctrl,
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 72df2e1b88af..95d34d7565c9 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -958,7 +958,7 @@ sunsu_type(struct uart_port *port)
return uart_config[type].name;
}
-static struct uart_ops sunsu_pops = {
+static const struct uart_ops sunsu_pops = {
.tx_empty = sunsu_tx_empty,
.set_mctrl = sunsu_set_mctrl,
.get_mctrl = sunsu_get_mctrl,
@@ -1212,8 +1212,8 @@ static int sunsu_kbd_ms_init(struct uart_sunsu_port *up)
if (up->port.type == PORT_UNKNOWN)
return -ENODEV;
- printk("%s: %s port at %llx, irq %u\n",
- up->port.dev->of_node->full_name,
+ printk("%pOF: %s port at %llx, irq %u\n",
+ up->port.dev->of_node,
(up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
(unsigned long long) up->port.mapbase,
up->port.irq);
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 481eb2989a1e..55b702775786 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1085,7 +1085,7 @@ static int qe_uart_verify_port(struct uart_port *port,
*
* Details on these functions can be found in Documentation/serial/driver
*/
-static struct uart_ops qe_uart_pops = {
+static const struct uart_ops qe_uart_pops = {
.tx_empty = qe_uart_tx_empty,
.set_mctrl = qe_uart_set_mctrl,
.get_mctrl = qe_uart_get_mctrl,
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index fde55dcdea5a..31a630ae0870 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1163,7 +1163,7 @@ static void cdns_uart_console_putchar(struct uart_port *port, int ch)
writel(ch, port->membase + CDNS_UART_FIFO);
}
-static void __init cdns_early_write(struct console *con, const char *s,
+static void cdns_early_write(struct console *con, const char *s,
unsigned n)
{
struct earlycon_device *dev = con->data;
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 3fafc5a1b2e0..3be981101297 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -884,7 +884,7 @@ static int synclink_init_one (struct pci_dev *dev,
const struct pci_device_id *ent);
static void synclink_remove_one (struct pci_dev *dev);
-static struct pci_device_id synclink_pci_tbl[] = {
+static const struct pci_device_id synclink_pci_tbl[] = {
{ PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, },
{ 0, }, /* terminate list */
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 529c6e3cd537..636b8ae29b46 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -95,7 +95,7 @@ MODULE_LICENSE("GPL");
#define MGSL_MAGIC 0x5401
#define MAX_DEVICES 32
-static struct pci_device_id pci_table[] = {
+static const struct pci_device_id pci_table[] = {
{PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 9b4fb0251c1a..4fed9e7b281f 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -479,7 +479,7 @@ static char *driver_version = "$Revision: 4.38 $";
static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
static void synclinkmp_remove_one(struct pci_dev *dev);
-static struct pci_device_id synclinkmp_pci_tbl[] = {
+static const struct pci_device_id synclinkmp_pci_tbl[] = {
{ PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
{ 0, }, /* terminate list */
};
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 4e7a4e9dcf4d..f8eba1c5412f 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -362,6 +362,32 @@ int tty_insert_flip_string_flags(struct tty_port *port,
EXPORT_SYMBOL(tty_insert_flip_string_flags);
/**
+ * __tty_insert_flip_char - Add one character to the tty buffer
+ * @port: tty port
+ * @ch: character
+ * @flag: flag byte
+ *
+ * Queue a single byte to the tty buffering, with an optional flag.
+ * This is the slow path of tty_insert_flip_char.
+ */
+int __tty_insert_flip_char(struct tty_port *port, unsigned char ch, char flag)
+{
+ struct tty_buffer *tb;
+ int flags = (flag == TTY_NORMAL) ? TTYB_NORMAL : 0;
+
+ if (!__tty_buffer_request_room(port, 1, flags))
+ return 0;
+
+ tb = port->buf.tail;
+ if (~tb->flags & TTYB_NORMAL)
+ *flag_buf_ptr(tb, tb->used) = flag;
+ *char_buf_ptr(tb, tb->used++) = ch;
+
+ return 1;
+}
+EXPORT_SYMBOL(__tty_insert_flip_char);
+
+/**
* tty_schedule_flip - push characters to ldisc
* @port: tty port to push from
*
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 10c4038c0e8d..da912517d295 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -462,6 +462,14 @@ static int hung_up_tty_fasync(int fd, struct file *file, int on)
return -ENOTTY;
}
+static void tty_show_fdinfo(struct seq_file *m, struct file *file)
+{
+ struct tty_struct *tty = file_tty(file);
+
+ if (tty && tty->ops && tty->ops->show_fdinfo)
+ tty->ops->show_fdinfo(tty, m);
+}
+
static const struct file_operations tty_fops = {
.llseek = no_llseek,
.read = tty_read,
@@ -472,6 +480,7 @@ static const struct file_operations tty_fops = {
.open = tty_open,
.release = tty_release,
.fasync = tty_fasync,
+ .show_fdinfo = tty_show_fdinfo,
};
static const struct file_operations console_fops = {
diff --git a/include/linux/mcb.h b/include/linux/mcb.h
index 4097ac9ea13a..b1a0ad9d23b3 100644
--- a/include/linux/mcb.h
+++ b/include/linux/mcb.h
@@ -136,5 +136,7 @@ extern struct resource *mcb_request_mem(struct mcb_device *dev,
const char *name);
extern void mcb_release_mem(struct resource *mem);
extern int mcb_get_irq(struct mcb_device *dev);
+extern struct resource *mcb_get_resource(struct mcb_device *dev,
+ unsigned int type);
#endif /* _LINUX_MCB_H */
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 61fbb440449c..a27ef5f56431 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -80,9 +80,10 @@ struct uart_8250_ops {
};
struct uart_8250_em485 {
- struct timer_list start_tx_timer; /* "rs485 start tx" timer */
- struct timer_list stop_tx_timer; /* "rs485 stop tx" timer */
- struct timer_list *active_timer; /* pointer to active timer */
+ struct hrtimer start_tx_timer; /* "rs485 start tx" timer */
+ struct hrtimer stop_tx_timer; /* "rs485 stop tx" timer */
+ struct hrtimer *active_timer; /* pointer to active timer */
+ struct uart_8250_port *port; /* for hrtimer callbacks */
};
/*
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 1775500294bb..5553e04e59c9 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -20,7 +20,7 @@
#ifndef LINUX_SERIAL_CORE_H
#define LINUX_SERIAL_CORE_H
-
+#include <linux/bitops.h>
#include <linux/compiler.h>
#include <linux/interrupt.h>
#include <linux/circ_buf.h>
@@ -144,7 +144,7 @@ struct uart_port {
unsigned char x_char; /* xon/xoff char */
unsigned char regshift; /* reg offset shift */
unsigned char iotype; /* io access style */
- unsigned char unused1;
+ unsigned char quirks; /* internal quirks */
#define UPIO_PORT (SERIAL_IO_PORT) /* 8b I/O port access */
#define UPIO_HUB6 (SERIAL_IO_HUB6) /* Hub6 ISA card */
@@ -155,6 +155,9 @@ struct uart_port {
#define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */
#define UPIO_MEM16 (SERIAL_IO_MEM16) /* 16b little endian */
+ /* quirks must be updated while holding port mutex */
+#define UPQ_NO_TXEN_TEST BIT(0)
+
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
struct uart_state *state; /* pointer to parent state */
@@ -175,7 +178,6 @@ struct uart_port {
* [for bit definitions in the UPF_CHANGE_MASK]
*
* Bits [0..UPF_LAST_USER] are userspace defined/visible/changeable
- * except bit 15 (UPF_NO_TXEN_TEST) which is masked off.
* The remaining bits are serial-core specific and not modifiable by
* userspace.
*/
@@ -192,7 +194,6 @@ struct uart_port {
#define UPF_SPD_SHI ((__force upf_t) ASYNC_SPD_SHI /* 12 */ )
#define UPF_LOW_LATENCY ((__force upf_t) ASYNC_LOW_LATENCY /* 13 */ )
#define UPF_BUGGY_UART ((__force upf_t) ASYNC_BUGGY_UART /* 14 */ )
-#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
#define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ )
#define UPF_NO_THRE_TEST ((__force upf_t) (1 << 19))
@@ -246,7 +247,6 @@ struct uart_port {
struct device *dev; /* parent device */
unsigned char hub6; /* this should be in the 8250 driver */
unsigned char suspended;
- unsigned char irq_wake;
unsigned char unused[2];
const char *name; /* port name */
struct attribute_group *attr_group; /* port specific attributes */
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 00b2213f6a35..fcdc0f5d9098 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -243,6 +243,7 @@
#include <linux/list.h>
#include <linux/cdev.h>
#include <linux/termios.h>
+#include <linux/seq_file.h>
struct tty_struct;
struct tty_driver;
@@ -285,6 +286,7 @@ struct tty_operations {
int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
int (*get_icount)(struct tty_struct *tty,
struct serial_icounter_struct *icount);
+ void (*show_fdinfo)(struct tty_struct *tty, struct seq_file *m);
#ifdef CONFIG_CONSOLE_POLL
int (*poll_init)(struct tty_driver *driver, int line, char *options);
int (*poll_get_char)(struct tty_driver *driver, int line);
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index c28dd523f96e..d43837f2ce3a 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -12,6 +12,7 @@ extern int tty_prepare_flip_string(struct tty_port *port,
unsigned char **chars, size_t size);
extern void tty_flip_buffer_push(struct tty_port *port);
void tty_schedule_flip(struct tty_port *port);
+int __tty_insert_flip_char(struct tty_port *port, unsigned char ch, char flag);
static inline int tty_insert_flip_char(struct tty_port *port,
unsigned char ch, char flag)
@@ -26,7 +27,7 @@ static inline int tty_insert_flip_char(struct tty_port *port,
*char_buf_ptr(tb, tb->used++) = ch;
return 1;
}
- return tty_insert_flip_string_flags(port, &ch, &flag, 1);
+ return __tty_insert_flip_char(port, ch, flag);
}
static inline int tty_insert_flip_string(struct tty_port *port,
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index c34a2a3eeff5..50d71c436323 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -56,8 +56,6 @@
#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
#define PORT_RT2880 29 /* Ralink RT2880 internal UART */
#define PORT_16550A_FSL64 30 /* Freescale 16550 UART with 64 FIFOs */
-#define PORT_DA830 31 /* TI DA8xx/66AK2x */
-#define PORT_MAX_8250 31 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
@@ -70,12 +68,17 @@
#define PORT_CLPS711X 33
#define PORT_SA1100 34
#define PORT_UART00 35
+#define PORT_OWL 36
#define PORT_21285 37
/* Sparc type numbers. */
#define PORT_SUNZILOG 38
#define PORT_SUNSAB 39
+/* Intel EG20 */
+#define PORT_PCH_8LINE 44
+#define PORT_PCH_2LINE 45
+
/* DEC */
#define PORT_DZ 46
#define PORT_ZS 47
@@ -205,8 +208,8 @@
/* MAX310X */
#define PORT_MAX310X 94
-/* High Speed UART for Medfield */
-#define PORT_MFD 95
+/* TI DA8xx/66AK2x */
+#define PORT_DA830 95
/* TI OMAP-UART */
#define PORT_OMAP 96
@@ -271,4 +274,7 @@
/* MPS2 UART */
#define PORT_MPS2UART 116
+/* MediaTek BTIF */
+#define PORT_MTK_BTIF 117
+
#endif /* _UAPILINUX_SERIAL_CORE_H */