summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-05-12 17:57:52 -0400
committerLinus Torvalds <torvalds@linux-foundation.org>2019-05-12 17:57:52 -0400
commit4dbf09fea60d158e60a30c419e0cfa1ea138dd57 (patch)
tree9530efcb3ca37e6664b9df41e8a33ea7286dba50
parent983dfa4b6ee556563f7963348e4e2f97fc8a15b8 (diff)
parent3008ba87093852f3756c5d33f584602e5e2a4aa4 (diff)
downloadlinux-4dbf09fea60d158e60a30c419e0cfa1ea138dd57.tar.bz2
Merge tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger: "MTD core changes: - New AFS partition parser - Update MAINTAINERS entry - Use of fall-throughs markers NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: - Switch to ->exec-op(). - meson: - Misc cleanups and fixes. - New OOB layout. - Sunxi: - A23/A33 NAND DMA support. - Ingenic: - Full reorganization and cleanup. - Clear separation between NAND controller and ECC engine. - Support JZ4740 an JZ4725B. - Denali: - Clear controller/chip separation. - ->exec_op() migration. - Various cleanups. - fsl_elbc: - Enable software ECC support. - Atmel: - Sam9x60 support. - GPMI: - Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes. SPI NOR core changes: - Print all JEDEC ID bytes on error - Fix comment of spi_nor_find_best_erase_type() - Add region locking flags for s25fl512s SPI NOR controller drivers changes: - intel-spi: - Avoid crossing 4K address boundary on read/write - Add support for Intel Comet Lake SPI serial flash" * tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits) mtd: part: fix incorrect format specifier for an unsigned long long mtd: lpddr_cmds: Mark expected switch fall-through mtd: phram: Mark expected switch fall-throughs mtd: cfi_cmdset_0002: Mark expected switch fall-throughs mtd: cfi_util: mark expected switch fall-throughs MAINTAINERS: MTD Git repository is hosted on kernel.org MAINTAINERS: Update jffs2 entry mtd: afs: add v2 partition parsing mtd: afs: factor the IIS read into partition parser mtd: afs: factor footer parsing into the v1 part parsing mtd: factor out v1 partition parsing mtd: afs: simplify partition detection mtd: afs: simplify partition parsing mtd: partitions: Add OF support to AFS partitions mtd: partitions: Add AFS partitions DT bindings mtd: afs: Move AFS partition parser to parsers subdir mtd: maps: Make uclinux_ram_map static mtd: maps: Allow MTD_PHYSMAP with MTD_RAM MAINTAINERS: Add myself as MTD maintainer MAINTAINERS: Remove my name from the MTD and NAND entries ...
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt1
-rw-r--r--Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml97
-rw-r--r--Documentation/devicetree/bindings/mtd/atmel-nand.txt1
-rw-r--r--Documentation/devicetree/bindings/mtd/denali-nand.txt40
-rw-r--r--Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt32
-rw-r--r--Documentation/devicetree/bindings/mtd/mtd-physmap.txt16
-rw-r--r--Documentation/devicetree/bindings/mtd/nand-controller.yaml143
-rw-r--r--Documentation/devicetree/bindings/mtd/nand.txt75
-rw-r--r--Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt17
-rw-r--r--Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-cfe-nor-partitions.txt24
-rw-r--r--Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt45
-rw-r--r--Documentation/devicetree/bindings/mtd/sunxi-nand.txt48
-rw-r--r--MAINTAINERS18
-rw-r--r--arch/arm/configs/at91_dt_defconfig2
-rw-r--r--arch/arm/configs/clps711x_defconfig2
-rw-r--r--arch/arm/configs/cm_x2xx_defconfig2
-rw-r--r--arch/arm/configs/cm_x300_defconfig2
-rw-r--r--arch/arm/configs/colibri_pxa270_defconfig2
-rw-r--r--arch/arm/configs/corgi_defconfig2
-rw-r--r--arch/arm/configs/davinci_all_defconfig2
-rw-r--r--arch/arm/configs/em_x270_defconfig2
-rw-r--r--arch/arm/configs/ep93xx_defconfig2
-rw-r--r--arch/arm/configs/eseries_pxa_defconfig2
-rw-r--r--arch/arm/configs/imx_v4_v5_defconfig2
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig2
-rw-r--r--arch/arm/configs/ixp4xx_defconfig2
-rw-r--r--arch/arm/configs/keystone_defconfig2
-rw-r--r--arch/arm/configs/lpc32xx_defconfig2
-rw-r--r--arch/arm/configs/mini2440_defconfig2
-rw-r--r--arch/arm/configs/mmp2_defconfig2
-rw-r--r--arch/arm/configs/multi_v4t_defconfig2
-rw-r--r--arch/arm/configs/multi_v5_defconfig2
-rw-r--r--arch/arm/configs/multi_v7_defconfig2
-rw-r--r--arch/arm/configs/mv78xx0_defconfig2
-rw-r--r--arch/arm/configs/mvebu_v5_defconfig2
-rw-r--r--arch/arm/configs/mvebu_v7_defconfig2
-rw-r--r--arch/arm/configs/mxs_defconfig2
-rw-r--r--arch/arm/configs/nhk8815_defconfig4
-rw-r--r--arch/arm/configs/omap1_defconfig2
-rw-r--r--arch/arm/configs/omap2plus_defconfig4
-rw-r--r--arch/arm/configs/orion5x_defconfig2
-rw-r--r--arch/arm/configs/oxnas_v6_defconfig2
-rw-r--r--arch/arm/configs/pxa3xx_defconfig2
-rw-r--r--arch/arm/configs/pxa_defconfig4
-rw-r--r--arch/arm/configs/qcom_defconfig2
-rw-r--r--arch/arm/configs/s3c2410_defconfig2
-rw-r--r--arch/arm/configs/s3c6400_defconfig2
-rw-r--r--arch/arm/configs/sama5_defconfig2
-rw-r--r--arch/arm/configs/socfpga_defconfig2
-rw-r--r--arch/arm/configs/spear13xx_defconfig2
-rw-r--r--arch/arm/configs/spear3xx_defconfig2
-rw-r--r--arch/arm/configs/spear6xx_defconfig2
-rw-r--r--arch/arm/configs/spitz_defconfig2
-rw-r--r--arch/arm/configs/tango4_defconfig2
-rw-r--r--arch/arm/configs/trizeps4_defconfig2
-rw-r--r--arch/arm/configs/u300_defconfig2
-rw-r--r--arch/arm64/configs/defconfig2
-rw-r--r--arch/mips/configs/bcm47xx_defconfig2
-rw-r--r--arch/mips/configs/ci20_defconfig2
-rw-r--r--arch/mips/configs/db1xxx_defconfig4
-rw-r--r--arch/mips/configs/generic/board-ni169445.config6
-rw-r--r--arch/mips/configs/generic/board-ocelot.config2
-rw-r--r--arch/mips/configs/loongson1b_defconfig2
-rw-r--r--arch/mips/configs/loongson1c_defconfig2
-rw-r--r--arch/mips/configs/qi_lb60_defconfig2
-rw-r--r--arch/mips/configs/rb532_defconfig2
-rw-r--r--arch/mips/configs/rbtx49xx_defconfig2
-rw-r--r--arch/mips/configs/xway_defconfig2
-rw-r--r--arch/powerpc/configs/40x/kilauea_defconfig2
-rw-r--r--arch/powerpc/configs/40x/obs600_defconfig2
-rw-r--r--arch/powerpc/configs/44x/canyonlands_defconfig2
-rw-r--r--arch/powerpc/configs/44x/eiger_defconfig2
-rw-r--r--arch/powerpc/configs/44x/sequoia_defconfig2
-rw-r--r--arch/powerpc/configs/44x/warp_defconfig2
-rw-r--r--arch/powerpc/configs/83xx/mpc8313_rdb_defconfig2
-rw-r--r--arch/powerpc/configs/83xx/mpc8315_rdb_defconfig2
-rw-r--r--arch/powerpc/configs/85xx-hw.config2
-rw-r--r--arch/powerpc/configs/85xx/ge_imp3a_defconfig2
-rw-r--r--arch/powerpc/configs/85xx/socrates_defconfig2
-rw-r--r--arch/powerpc/configs/85xx/tqm8548_defconfig4
-rw-r--r--arch/powerpc/configs/85xx/xes_mpc85xx_defconfig2
-rw-r--r--arch/powerpc/configs/86xx-hw.config2
-rw-r--r--arch/powerpc/configs/mpc512x_defconfig2
-rw-r--r--arch/powerpc/configs/mpc83xx_defconfig2
-rw-r--r--arch/powerpc/configs/pasemi_defconfig2
-rw-r--r--arch/powerpc/configs/ppc44x_defconfig2
-rw-r--r--arch/sh/configs/ap325rxa_defconfig2
-rw-r--r--arch/sh/configs/ecovec24_defconfig2
-rw-r--r--arch/sh/configs/migor_defconfig2
-rw-r--r--arch/sh/configs/sdk7786_defconfig2
-rw-r--r--arch/sh/configs/se7724_defconfig2
-rw-r--r--arch/sh/configs/titan_defconfig2
-rw-r--r--drivers/memory/atmel-ebi.c37
-rw-r--r--drivers/mtd/Kconfig20
-rw-r--r--drivers/mtd/Makefile1
-rw-r--r--drivers/mtd/afs.c266
-rw-r--r--drivers/mtd/bcm63xxpart.c163
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c2
-rw-r--r--drivers/mtd/chips/cfi_util.c6
-rw-r--r--drivers/mtd/devices/Kconfig2
-rw-r--r--drivers/mtd/devices/phram.c2
-rw-r--r--drivers/mtd/lpddr/lpddr_cmds.c1
-rw-r--r--drivers/mtd/maps/Kconfig2
-rw-r--r--drivers/mtd/maps/physmap-core.c2
-rw-r--r--drivers/mtd/maps/physmap-gemini.c2
-rw-r--r--drivers/mtd/maps/uclinux.c8
-rw-r--r--drivers/mtd/mtdpart.c2
-rw-r--r--drivers/mtd/nand/Kconfig1
-rw-r--r--drivers/mtd/nand/core.c34
-rw-r--r--drivers/mtd/nand/onenand/onenand_base.c5
-rw-r--r--drivers/mtd/nand/onenand/onenand_bbt.c3
-rw-r--r--drivers/mtd/nand/raw/Kconfig393
-rw-r--r--drivers/mtd/nand/raw/Makefile9
-rw-r--r--drivers/mtd/nand/raw/atmel/nand-controller.c127
-rw-r--r--drivers/mtd/nand/raw/atmel/pmecc.c5
-rw-r--r--drivers/mtd/nand/raw/atmel/pmecc.h6
-rw-r--r--drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c2
-rw-r--r--drivers/mtd/nand/raw/brcmnand/brcmnand.c7
-rw-r--r--drivers/mtd/nand/raw/denali.c1152
-rw-r--r--drivers/mtd/nand/raw/denali.h117
-rw-r--r--drivers/mtd/nand/raw/denali_dt.c98
-rw-r--r--drivers/mtd/nand/raw/denali_pci.c38
-rw-r--r--drivers/mtd/nand/raw/diskonchip.c7
-rw-r--r--drivers/mtd/nand/raw/fsl_elbc_nand.c201
-rw-r--r--drivers/mtd/nand/raw/fsl_ifc_nand.c4
-rw-r--r--drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c6
-rw-r--r--drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c19
-rw-r--r--drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h1
-rw-r--r--drivers/mtd/nand/raw/hisi504_nand.c2
-rw-r--r--drivers/mtd/nand/raw/ingenic/Kconfig50
-rw-r--r--drivers/mtd/nand/raw/ingenic/Makefile7
-rw-r--r--drivers/mtd/nand/raw/ingenic/ingenic_ecc.c166
-rw-r--r--drivers/mtd/nand/raw/ingenic/ingenic_ecc.h83
-rw-r--r--drivers/mtd/nand/raw/ingenic/ingenic_nand.c530
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4725b_bch.c295
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4740_ecc.c197
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4740_nand.c (renamed from drivers/mtd/nand/raw/jz4740_nand.c)7
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4780_bch.c (renamed from drivers/mtd/nand/raw/jz4780_bch.c)182
-rw-r--r--drivers/mtd/nand/raw/internals.h3
-rw-r--r--drivers/mtd/nand/raw/jz4780_bch.h43
-rw-r--r--drivers/mtd/nand/raw/jz4780_nand.c415
-rw-r--r--drivers/mtd/nand/raw/marvell_nand.c51
-rw-r--r--drivers/mtd/nand/raw/meson_nand.c30
-rw-r--r--drivers/mtd/nand/raw/mtk_nand.c4
-rw-r--r--drivers/mtd/nand/raw/nand_amd.c19
-rw-r--r--drivers/mtd/nand/raw/nand_base.c324
-rw-r--r--drivers/mtd/nand/raw/nand_bbt.c73
-rw-r--r--drivers/mtd/nand/raw/nand_esmt.c19
-rw-r--r--drivers/mtd/nand/raw/nand_hynix.c94
-rw-r--r--drivers/mtd/nand/raw/nand_jedec.c27
-rw-r--r--drivers/mtd/nand/raw/nand_macronix.c2
-rw-r--r--drivers/mtd/nand/raw/nand_micron.c16
-rw-r--r--drivers/mtd/nand/raw/nand_onfi.c35
-rw-r--r--drivers/mtd/nand/raw/nand_samsung.c46
-rw-r--r--drivers/mtd/nand/raw/nand_toshiba.c21
-rw-r--r--drivers/mtd/nand/raw/nandsim.c144
-rw-r--r--drivers/mtd/nand/raw/nuc900_nand.c3
-rw-r--r--drivers/mtd/nand/raw/omap2.c4
-rw-r--r--drivers/mtd/nand/raw/omap_elm.c4
-rw-r--r--drivers/mtd/nand/raw/qcom_nandc.c8
-rw-r--r--drivers/mtd/nand/raw/sh_flctl.c13
-rw-r--r--drivers/mtd/nand/raw/sunxi_nand.c90
-rw-r--r--drivers/mtd/nand/raw/tegra_nand.c8
-rw-r--r--drivers/mtd/nand/raw/vf610_nfc.c3
-rw-r--r--drivers/mtd/nand/spi/core.c169
-rw-r--r--drivers/mtd/nand/spi/gigadevice.c8
-rw-r--r--drivers/mtd/nand/spi/macronix.c4
-rw-r--r--drivers/mtd/nand/spi/micron.c2
-rw-r--r--drivers/mtd/nand/spi/toshiba.c12
-rw-r--r--drivers/mtd/nand/spi/winbond.c4
-rw-r--r--drivers/mtd/parsers/Kconfig27
-rw-r--r--drivers/mtd/parsers/Makefile2
-rw-r--r--drivers/mtd/parsers/afs.c410
-rw-r--r--drivers/mtd/parsers/parser_imagetag.c222
-rw-r--r--drivers/mtd/sm_ftl.c12
-rw-r--r--drivers/mtd/spi-nor/intel-spi-pci.c1
-rw-r--r--drivers/mtd/spi-nor/intel-spi.c8
-rw-r--r--drivers/mtd/spi-nor/spi-nor.c10
-rw-r--r--drivers/mtd/tests/mtd_nandecctest.c16
-rw-r--r--include/linux/mtd/bbm.h14
-rw-r--r--include/linux/mtd/nand.h32
-rw-r--r--include/linux/mtd/nand_bch.h6
-rw-r--r--include/linux/mtd/onenand.h3
-rw-r--r--include/linux/mtd/rawnand.h122
-rw-r--r--include/linux/mtd/spinand.h7
-rw-r--r--include/linux/platform_data/elm.h2
-rw-r--r--include/soc/at91/atmel-sfr.h34
187 files changed, 4763 insertions, 2862 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt b/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt
index 9bb5f57e2066..94bf7896a688 100644
--- a/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt
@@ -15,6 +15,7 @@ Required properties:
"atmel,at91sam9g45-ebi"
"atmel,at91sam9x5-ebi"
"atmel,sama5d3-ebi"
+ "microchip,sam9x60-ebi"
- reg: Contains offset/length value for EBI memory mapping.
This property might contain several entries if the EBI
diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
new file mode 100644
index 000000000000..fbd4da3684fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/allwinner,sun4i-a10-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 NAND Controller Device Tree Bindings
+
+allOf:
+ - $ref: "nand-controller.yaml"
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ "#address-cells": true
+ "#size-cells": true
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-nand
+ - allwinner,sun8i-a23-nand-controller
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: mod
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: ahb
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rxtx
+
+ pinctrl-names: true
+
+patternProperties:
+ "^pinctrl-[0-9]+$": true
+
+ "^nand@[a-f0-9]+$":
+ properties:
+ reg:
+ maxItems: 1
+ minimum: 0
+ maximum: 7
+
+ nand-ecc-mode: true
+
+ nand-ecc-algo:
+ const: bch
+
+ nand-ecc-step-size:
+ enum: [ 512, 1024 ]
+
+ nand-ecc-strength:
+ maximum: 80
+
+ allwinner,rb:
+ description:
+ Contains the native Ready/Busy IDs.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 9bb66e476672..68b51dc58816 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -14,6 +14,7 @@ Required properties:
"atmel,at91sam9261-nand-controller"
"atmel,at91sam9g45-nand-controller"
"atmel,sama5d3-nand-controller"
+ "microchip,sam9x60-nand-controller"
- ranges: empty ranges property to forward EBI ranges definitions.
- #address-cells: should be set to 2.
- #size-cells: should be set to 1.
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
index f33da8782741..b14b6751c2f3 100644
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -7,34 +7,48 @@ Required properties:
"socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b)
- reg : should contain registers location and length for data and reg.
- reg-names: Should contain the reg names "nand_data" and "denali_reg"
+ - #address-cells: should be 1. The cell encodes the chip select connection.
+ - #size-cells : should be 0.
- interrupts : The interrupt number.
- clocks: should contain phandle of the controller core clock, the bus
interface clock, and the ECC circuit clock.
- clock-names: should contain "nand", "nand_x", "ecc"
-Optional properties:
- - nand-ecc-step-size: see nand.txt for details. If present, the value must be
- 512 for "altr,socfpga-denali-nand"
- 1024 for "socionext,uniphier-denali-nand-v5a"
- 1024 for "socionext,uniphier-denali-nand-v5b"
- - nand-ecc-strength: see nand.txt for details. Valid values are:
- 8, 15 for "altr,socfpga-denali-nand"
- 8, 16, 24 for "socionext,uniphier-denali-nand-v5a"
- 8, 16 for "socionext,uniphier-denali-nand-v5b"
- - nand-ecc-maximize: see nand.txt for details
-
-The device tree may optionally contain sub-nodes describing partitions of the
+Sub-nodes:
+ Sub-nodes represent available NAND chips.
+
+ Required properties:
+ - reg: should contain the bank ID of the controller to which each chip
+ select is connected.
+
+ Optional properties:
+ - nand-ecc-step-size: see nand.txt for details.
+ If present, the value must be
+ 512 for "altr,socfpga-denali-nand"
+ 1024 for "socionext,uniphier-denali-nand-v5a"
+ 1024 for "socionext,uniphier-denali-nand-v5b"
+ - nand-ecc-strength: see nand.txt for details. Valid values are:
+ 8, 15 for "altr,socfpga-denali-nand"
+ 8, 16, 24 for "socionext,uniphier-denali-nand-v5a"
+ 8, 16 for "socionext,uniphier-denali-nand-v5b"
+ - nand-ecc-maximize: see nand.txt for details
+
+The chip nodes may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.
Examples:
nand: nand@ff900000 {
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
compatible = "altr,socfpga-denali-nand";
reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
reg-names = "nand_data", "denali_reg";
clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
clock-names = "nand", "nand_x", "ecc";
interrupts = <0 144 4>;
+
+ nand@0 {
+ reg = <0>;
+ }
};
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
index 29ea5853ca91..c02259353327 100644
--- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
@@ -1,4 +1,4 @@
-* Ingenic JZ4780 NAND/BCH
+* Ingenic JZ4780 NAND/ECC
This file documents the device tree bindings for NAND flash devices on the
JZ4780. NAND devices are connected to the NEMC controller (described in
@@ -6,15 +6,18 @@ memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must
be children of the NEMC node.
Required NAND controller device properties:
-- compatible: Should be set to "ingenic,jz4780-nand".
+- compatible: Should be one of:
+ * ingenic,jz4740-nand
+ * ingenic,jz4725b-nand
+ * ingenic,jz4780-nand
- reg: For each bank with a NAND chip attached, should specify a bank number,
an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank).
Optional NAND controller device properties:
-- ingenic,bch-controller: To make use of the hardware BCH controller, this
- property must contain a phandle for the BCH controller node. The required
+- ecc-engine: To make use of the hardware ECC controller, this
+ property must contain a phandle for the ECC controller node. The required
properties for this node are described below. If this is not specified,
- software BCH will be used instead.
+ software ECC will be used instead.
Optional children nodes:
- Individual NAND chips are children of the NAND controller node.
@@ -45,7 +48,7 @@ nemc: nemc@13410000 {
#address-cells = <1>;
#size-cells = <0>;
- ingenic,bch-controller = <&bch>;
+ ecc-engine = <&bch>;
nand@1 {
reg = <1>;
@@ -67,14 +70,17 @@ nemc: nemc@13410000 {
};
};
-The BCH controller is a separate SoC component used for error correction on
+The ECC controller is a separate SoC component used for error correction on
NAND devices. The following is a description of the device properties for a
-BCH controller.
-
-Required BCH properties:
-- compatible: Should be set to "ingenic,jz4780-bch".
-- reg: Should specify the BCH controller registers location and length.
-- clocks: Clock for the BCH controller.
+ECC controller.
+
+Required ECC properties:
+- compatible: Should be one of:
+ * ingenic,jz4740-ecc
+ * ingenic,jz4725b-bch
+ * ingenic,jz4780-bch
+- reg: Should specify the ECC controller registers location and length.
+- clocks: Clock for the ECC controller.
Example:
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
index 7df0dcaccb7d..c69f4f065d23 100644
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
@@ -96,3 +96,19 @@ An example using SRAM:
bank-width = <2>;
};
+An example using gpio-addrs
+
+ flash@20000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash", "jedec-flash";
+ reg = <0x20000000 0x02000000>;
+ ranges = <0 0x00000000 0x02000000
+ 1 0x02000000 0x02000000>;
+ bank-width = <2>;
+ addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ partition@0 {
+ label = "test-part1";
+ reg = <0 0x04000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
new file mode 100644
index 000000000000..199ba5ac2a06
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAND Chip and NAND Controller Generic Binding
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@bootlin.com>
+ - Richard Weinberger <richard@nod.at>
+
+description: |
+ The NAND controller should be represented with its own DT node, and
+ all NAND chips attached to this controller should be defined as
+ children nodes of the NAND controller. This representation should be
+ enforced even for simple controllers supporting only one chip.
+
+ The ECC strength and ECC step size properties define the user
+ desires in terms of correction capability of a controller. Together,
+ they request the ECC engine to correct {strength} bit errors per
+ {size} bytes.
+
+ The interpretation of these parameters is implementation-defined, so
+ not all implementations must support all possible
+ combinations. However, implementations are encouraged to further
+ specify the value(s) they support.
+
+properties:
+ $nodename:
+ pattern: "^nand-controller(@.*)?"
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ ranges: true
+
+patternProperties:
+ "^nand@[a-f0-9]$":
+ properties:
+ reg:
+ description:
+ Contains the native Ready/Busy IDs.
+
+ nand-ecc-mode:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/string
+ - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ]
+ description:
+ Desired ECC engine, either hardware (most of the time
+ embedded in the NAND controller) or software correction
+ (Linux will handle the calculations). soft_bch is deprecated
+ and should be replaced by soft and nand-ecc-algo.
+
+ nand-ecc-algo:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/string
+ - enum: [ hamming, bch, rs ]
+ description:
+ Desired ECC algorithm.
+
+ nand-bus-width:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 8, 16 ]
+ - default: 8
+ description:
+ Bus width to the NAND chip
+
+ nand-on-flash-bbt:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ With this property, the OS will search the device for a Bad
+ Block Table (BBT). If not found, it will create one, reserve
+ a few blocks at the end of the device to store it and update
+ it as the device ages. Otherwise, the out-of-band area of a
+ few pages of all the blocks will be scanned at boot time to
+ find Bad Block Markers (BBM). These markers will help to
+ build a volatile BBT in RAM.
+
+ nand-ecc-strength:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 1
+ description:
+ Maximum number of bits that can be corrected per ECC step.
+
+ nand-ecc-step-size:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 1
+ description:
+ Number of data bytes covered by a single ECC step.
+
+ nand-ecc-maximize:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Whether or not the ECC strength should be maximized. The
+ maximum ECC strength is both controller and chip
+ dependent. The ECC engine has to select the ECC config
+ providing the best strength and taking the OOB area size
+ constraint into account. This is particularly useful when
+ only the in-band area is used by the upper layers, and you
+ want to make your NAND as reliable as possible.
+
+ nand-is-boot-medium:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Whether or not the NAND chip is a boot medium. Drivers might
+ use this information to select ECC algorithms supported by
+ the boot ROM or similar restrictions.
+
+ nand-rb:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ Contains the native Ready/Busy IDs.
+
+ required:
+ - reg
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+
+examples:
+ - |
+ nand-controller {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* controller specific properties */
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "bch";
+
+ /* controller specific properties */
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
deleted file mode 100644
index e949c778e983..000000000000
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-* NAND chip and NAND controller generic binding
-
-NAND controller/NAND chip representation:
-
-The NAND controller should be represented with its own DT node, and all
-NAND chips attached to this controller should be defined as children nodes
-of the NAND controller. This representation should be enforced even for
-simple controllers supporting only one chip.
-
-Mandatory NAND controller properties:
-- #address-cells: depends on your controller. Should at least be 1 to
- encode the CS line id.
-- #size-cells: depends on your controller. Put zero unless you need a
- mapping between CS lines and dedicated memory regions
-
-Optional NAND controller properties
-- ranges: only needed if you need to define a mapping between CS lines and
- memory regions
-
-Optional NAND chip properties:
-
-- nand-ecc-mode : String, operation mode of the NAND ecc mode.
- Supported values are: "none", "soft", "hw", "hw_syndrome",
- "hw_oob_first", "on-die".
- Deprecated values:
- "soft_bch": use "soft" and nand-ecc-algo instead
-- nand-ecc-algo: string, algorithm of NAND ECC.
- Valid values are: "hamming", "bch", "rs".
-- nand-bus-width : 8 or 16 bus width if not present 8
-- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
-
-- nand-ecc-strength: integer representing the number of bits to correct
- per ECC step.
-
-- nand-ecc-step-size: integer representing the number of data bytes
- that are covered by a single ECC step.
-
-- nand-ecc-maximize: boolean used to specify that you want to maximize ECC
- strength. The maximum ECC strength is both controller and
- chip dependent. The controller side has to select the ECC
- config providing the best strength and taking the OOB area
- size constraint into account.
- This is particularly useful when only the in-band area is
- used by the upper layers, and you want to make your NAND
- as reliable as possible.
-- nand-is-boot-medium: Whether the NAND chip is a boot medium. Drivers might use
- this information to select ECC algorithms supported by
- the boot ROM or similar restrictions.
-
-- nand-rb: shall contain the native Ready/Busy ids.
-
-The ECC strength and ECC step size properties define the correction capability
-of a controller. Together, they say a controller can correct "{strength} bit
-errors per {size} bytes".
-
-The interpretation of these parameters is implementation-defined, so not all
-implementations must support all possible combinations. However, implementations
-are encouraged to further specify the value(s) they support.
-
-Example:
-
- nand-controller {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* controller specific properties */
-
- nand@0 {
- reg = <0>;
- nand-ecc-mode = "soft";
- nand-ecc-algo = "bch";
-
- /* controller specific properties */
- };
- };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt
new file mode 100644
index 000000000000..d5c5616f6db5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt
@@ -0,0 +1,17 @@
+ARM AFS - ARM Firmware Suite Partitions
+=======================================
+
+The ARM Firmware Suite is a flash partitioning system found on the
+ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
+Versatile PB, the RealView family, Versatile Express and Juno.
+
+Required properties:
+- compatible : (required) must be "arm,arm-firmware-suite"
+
+Example:
+
+flash@0 {
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
+};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-cfe-nor-partitions.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-cfe-nor-partitions.txt
new file mode 100644
index 000000000000..9f630e95f180
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-cfe-nor-partitions.txt
@@ -0,0 +1,24 @@
+Broadcom BCM963XX CFE Loader NOR Flash Partitions
+=================================================
+
+Most Broadcom BCM63XX SoC based devices follow the Broadcom reference layout for
+NOR. The first erase block used for the CFE bootloader, the last for an
+NVRAM partition, and the remainder in-between for one to two firmware partitions
+at fixed offsets. A valid firmware partition is identified by the ImageTag
+header found at beginning of the second erase block, containing the rootfs and
+kernel offsets and sizes within the firmware partition.
+
+Required properties:
+- compatible : must be "brcm,bcm963xx-cfe-nor-partitions"
+
+Example:
+
+flash@1fc00000 {
+ compatible = "cfi-flash";
+ reg = <0x1fc00000 0x400000>;
+ bank-width = <2>;
+
+ partitions {
+ compatible = "brcm,bcm963xx-cfe-nor-partitions";
+ };
+};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt
new file mode 100644
index 000000000000..f8b7418ed817
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt
@@ -0,0 +1,45 @@
+Broadcom BCM963XX ImageTag Partition Container
+==============================================
+
+Some Broadcom BCM63XX SoC based devices contain additional, non discoverable
+partitions or non standard bootloader partition sizes. For these a mixed layout
+needs to be used with an explicit firmware partition.
+
+The BCM963XX ImageTag is a simple firmware header describing the offsets and
+sizes of the rootfs and kernel parts contained in the firmware.
+
+Required properties:
+- compatible : must be "brcm,bcm963xx-imagetag"
+
+Example:
+
+flash@1e000000 {
+ compatible = "cfi-flash";
+ reg = <0x1e000000 0x2000000>;
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cfe@0 {
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ firmware@10000 {
+ reg = <0x10000 0x7d0000>;
+ compatible = "brcm,bcm963xx-imagetag";
+ };
+
+ caldata@7e0000 {
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ nvram@7f0000 {
+ reg = <0x7f0000 0x10000>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
deleted file mode 100644
index dcd5a5d80dc0..000000000000
--- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Allwinner NAND Flash Controller (NFC)
-
-Required properties:
-- compatible : "allwinner,sun4i-a10-nand".
-- reg : shall contain registers location and length for data and reg.
-- interrupts : shall define the nand controller interrupt.
-- #address-cells: shall be set to 1. Encode the nand CS.
-- #size-cells : shall be set to 0.
-- clocks : shall reference nand controller clocks.
-- clock-names : nand controller internal clock names. Shall contain :
- * "ahb" : AHB gating clock
- * "mod" : nand controller clock
-
-Optional properties:
-- dmas : shall reference DMA channel associated to the NAND controller.
-- dma-names : shall be "rxtx".
-
-Optional children nodes:
-Children nodes represent the available nand chips.
-
-Optional properties:
-- reset : phandle + reset specifier pair
-- reset-names : must contain "ahb"
-- allwinner,rb : shall contain the native Ready/Busy ids.
-- nand-ecc-mode : one of the supported ECC modes ("hw", "soft", "soft_bch" or
- "none")
-
-see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
-
-
-Examples:
-nfc: nand@1c03000 {
- compatible = "allwinner,sun4i-a10-nand";
- reg = <0x01c03000 0x1000>;
- interrupts = <0 37 1>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
- clock-names = "ahb", "mod";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
-
- nand@0 {
- reg = <0>;
- allwinner,rb = <0>;
- nand-ecc-mode = "soft_bch";
- };
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 3c65228e93c5..fb9f9d71f7a2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8418,9 +8418,11 @@ F: drivers/net/ethernet/jme.*
JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
M: David Woodhouse <dwmw2@infradead.org>
+M: Richard Weinberger <richard@nod.at>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/doc/jffs2.html
-S: Maintained
+T: git git://git.infradead.org/ubifs-2.6.git
+S: Odd Fixes
F: fs/jffs2/
F: include/uapi/linux/jffs2.h
@@ -10114,14 +10116,15 @@ F: mm/
MEMORY TECHNOLOGY DEVICES (MTD)
M: David Woodhouse <dwmw2@infradead.org>
M: Brian Norris <computersforpeace@gmail.com>
-M: Boris Brezillon <bbrezillon@kernel.org>
M: Marek Vasut <marek.vasut@gmail.com>
+M: Miquel Raynal <miquel.raynal@bootlin.com>
M: Richard Weinberger <richard@nod.at>
+M: Vignesh Raghavendra <vigneshr@ti.com>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/
Q: http://patchwork.ozlabs.org/project/linux-mtd/list/
-T: git git://git.infradead.org/linux-mtd.git master
-T: git git://git.infradead.org/linux-mtd.git mtd/next
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/fixes
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next
S: Maintained
F: Documentation/devicetree/bindings/mtd/
F: drivers/mtd/
@@ -10730,14 +10733,12 @@ S: Supported
F: drivers/net/ethernet/myricom/myri10ge/
NAND FLASH SUBSYSTEM
-M: Boris Brezillon <bbrezillon@kernel.org>
M: Miquel Raynal <miquel.raynal@bootlin.com>
R: Richard Weinberger <richard@nod.at>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/
Q: http://patchwork.ozlabs.org/project/linux-mtd/list/
-T: git git://git.infradead.org/linux-mtd.git nand/fixes
-T: git git://git.infradead.org/linux-mtd.git nand/next
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next
S: Maintained
F: drivers/mtd/nand/
F: include/linux/mtd/*nand*.h
@@ -14751,8 +14752,7 @@ M: Tudor Ambarus <tudor.ambarus@microchip.com>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/
Q: http://patchwork.ozlabs.org/project/linux-mtd/list/
-T: git git://git.infradead.org/linux-mtd.git spi-nor/fixes
-T: git git://git.infradead.org/linux-mtd.git spi-nor/next
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git spi-nor/next
S: Maintained
F: drivers/mtd/spi-nor/
F: include/linux/mtd/spi-nor.h
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index b7752929975c..a88e31449880 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -55,7 +55,7 @@ CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 09ae750164e0..c255dab36bde 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -35,7 +35,7 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_NETDEVICES=y
# CONFIG_NET_CADENCE is not set
diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
index fb45b4983d3c..5344434df652 100644
--- a/arch/arm/configs/cm_x2xx_defconfig
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -58,7 +58,7 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PXA2XX=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_GPIO=m
CONFIG_MTD_NAND_CM_X270=y
CONFIG_MTD_NAND_PLATFORM=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 5e349c625b71..3707a014cbc4 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -48,7 +48,7 @@ CONFIG_LIB80211=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index 8995695fc118..8d484e4d51cc 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -64,7 +64,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PXA2XX=y
CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 09e1672777c9..d99725984947 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -87,7 +87,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_ROM=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_SHARPSL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_SD=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 207962a656a2..4a8cad4d3707 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -74,7 +74,7 @@ CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_M25P80=m
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
CONFIG_MTD_NAND_DAVINCI=m
CONFIG_MTD_SPI_NOR=m
CONFIG_MTD_UBI=m
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig
index 30a67523f860..61228a25ba8d 100644
--- a/arch/arm/configs/em_x270_defconfig
+++ b/arch/arm/configs/em_x270_defconfig
@@ -54,7 +54,7 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PXA2XX=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 78cd73d1c795..14889a785f07 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -63,7 +63,7 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_ROM=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_BLK_DEV_NBD=y
CONFIG_EEPROM_LEGACY=y
CONFIG_SCSI=y
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index eabb784cf7da..b85575867d21 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -43,7 +43,7 @@ CONFIG_MAC80211_RC_PID=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_MTD=m
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
CONFIG_MTD_NAND_TMIO=m
CONFIG_BLK_DEV_LOOP=m
# CONFIG_SCSI_PROC_FS is not set
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index b37f8e675e40..f2cf0722e8e1 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -61,7 +61,7 @@ CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
CONFIG_EEPROM_AT24=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 50fb01d70b10..8116648a8efd 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -110,7 +110,7 @@ CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SST25L=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_VF610_NFC=y
CONFIG_MTD_NAND_MXC=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 8c3c99cd6de9..39ebcce3bc2f 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -112,7 +112,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_IXP4XX=y
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 3ded35a07f45..72fee57aad2f 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -124,7 +124,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_DAVINCI=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index e752fb704df0..4b3b2c693c29 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -47,7 +47,7 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_SLC_LPC32XX=y
CONFIG_MTD_NAND_MLC_LPC32XX=y
CONFIG_MTD_UBI=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index d95a8059d30b..8b0f7c4c3f09 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -92,7 +92,7 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_S3C2410=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_LPDDR=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index 1eeee7f11d91..94deb0ed0541 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -28,7 +28,7 @@ CONFIG_IP_PNP=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_BLK_DEV is not set
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index eeea0c41138b..0b42bddfbc82 100644
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -38,7 +38,7 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_GPIO=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 318b76fa26d1..63b5a8824f0f 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -87,7 +87,7 @@ CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_ORION=y
CONFIG_MTD_SPI_NOR=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index c75051b9392c..b7b1cd00a294 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -184,7 +184,7 @@ CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_OMAP_BCH=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 0448bd8075ac..e9567513f068 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -47,7 +47,7 @@ CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_ORION=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_SCSI_PROC_FS is not set
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index 4b598da0d086..0e5577a31851 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -77,7 +77,7 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_ORION=y
CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_LOOP=y
diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index 55140219ab11..48f7b4277b8d 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -52,7 +52,7 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 38480596c449..ed570a0d1f2a 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -50,7 +50,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SST25L=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 5f4c6aaa07f6..cfc094189d09 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -53,8 +53,8 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 8448a7f407a4..82af77c093f1 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -89,7 +89,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 3f03ec6d2644..c7bf9c493646 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -143,8 +143,8 @@ CONFIG_MTD_M25P80=m
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_SPI_NOR=m
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index bf9046331f6e..077e0fde1ff9 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -70,7 +70,7 @@ CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_ORION=y
CONFIG_BLK_DEV_LOOP=y
diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig
index f6ba32c9d173..cae0db6b4eaf 100644
--- a/arch/arm/configs/oxnas_v6_defconfig
+++ b/arch/arm/configs/oxnas_v6_defconfig
@@ -50,7 +50,7 @@ CONFIG_SIMPLE_PM_BUS=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_OXNAS=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index 3e0de035ab77..7681eea60127 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -31,7 +31,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index d4654755b09c..f6d24d762a7f 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -185,8 +185,8 @@ CONFIG_MTD_PXA2XX=m
CONFIG_MTD_M25P80=m
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_DOCG3=m
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_RAW_NAND=m
+CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_GPIO=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index bd6440f23493..4c50b5337cf6 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -57,7 +57,7 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_LOOP=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2afb359f3168..39c648594d93 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -192,7 +192,7 @@ CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_ROM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_S3C2410=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 507d7ad7523a..6e2656567da6 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -23,7 +23,7 @@ CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x5100
CONFIG_VFP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_S3C2410=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index b0026f73083d..515cb37eeab6 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -66,7 +66,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 08d1b3e11d68..3b42e0d597bd 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -51,7 +51,7 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
index 7b36eeb928bb..8ee3679ca8b2 100644
--- a/arch/arm/configs/spear13xx_defconfig
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -32,7 +32,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig
index f1b52fb3461b..ddd73b25f75e 100644
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -17,7 +17,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index 124c244d8df1..5b410f0a365b 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -14,7 +14,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 9ea82c118661..f6d2f674517c 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -84,7 +84,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_ROM=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_SHARPSL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_SD=y
diff --git a/arch/arm/configs/tango4_defconfig b/arch/arm/configs/tango4_defconfig
index 68725d4eae45..68eb16e583ac 100644
--- a/arch/arm/configs/tango4_defconfig
+++ b/arch/arm/configs/tango4_defconfig
@@ -39,7 +39,7 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_TANGO=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 2b5a224d2da1..ecad22501b48 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -76,7 +76,7 @@ CONFIG_MTD_DOC2001PLUS=y
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 831ba6a9ee8b..bedf397c75de 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -26,7 +26,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_FSMC=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 2d9c39033c1a..9a8718bbf6ba 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -206,7 +206,7 @@ CONFIG_SIMPLE_PM_BUS=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_NAND_QCOM=y
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index 249f5285e343..91ce75edbfb4 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -41,7 +41,7 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_BCM47XXNFLASH=y
CONFIG_NETDEVICES=y
CONFIG_B44=y
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index 412800d5d7e0..50bebce28500 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -51,7 +51,7 @@ CONFIG_DEVTMPFS=y
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=32
CONFIG_MTD=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_JZ4780=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_FASTMAP=y
diff --git a/arch/mips/configs/db1xxx_defconfig b/arch/mips/configs/db1xxx_defconfig
index 34633b7611cb..bc9b6ae046b2 100644
--- a/arch/mips/configs/db1xxx_defconfig
+++ b/arch/mips/configs/db1xxx_defconfig
@@ -95,8 +95,8 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SST25L=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_AU1550=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_SPI_NOR=y
diff --git a/arch/mips/configs/generic/board-ni169445.config b/arch/mips/configs/generic/board-ni169445.config
index f72223b366ca..1ed0d3e8715e 100644
--- a/arch/mips/configs/generic/board-ni169445.config
+++ b/arch/mips/configs/generic/board-ni169445.config
@@ -15,9 +15,9 @@ CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_BCH=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_NAND_ECC_SW_BCH=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_IDS=y
diff --git a/arch/mips/configs/generic/board-ocelot.config b/arch/mips/configs/generic/board-ocelot.config
index 184eb65a6ba7..1134fbb99fc2 100644
--- a/arch/mips/configs/generic/board-ocelot.config
+++ b/arch/mips/configs/generic/board-ocelot.config
@@ -10,7 +10,7 @@ CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
diff --git a/arch/mips/configs/loongson1b_defconfig b/arch/mips/configs/loongson1b_defconfig
index aa7e98c5f5fc..3d390a7494d6 100644
--- a/arch/mips/configs/loongson1b_defconfig
+++ b/arch/mips/configs/loongson1b_defconfig
@@ -41,7 +41,7 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=m
diff --git a/arch/mips/configs/loongson1c_defconfig b/arch/mips/configs/loongson1c_defconfig
index 520e7ef35383..247d56e94c0a 100644
--- a/arch/mips/configs/loongson1c_defconfig
+++ b/arch/mips/configs/loongson1c_defconfig
@@ -42,7 +42,7 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=m
diff --git a/arch/mips/configs/qi_lb60_defconfig b/arch/mips/configs/qi_lb60_defconfig
index 7671fe6a8042..1a0677d04982 100644
--- a/arch/mips/configs/qi_lb60_defconfig
+++ b/arch/mips/configs/qi_lb60_defconfig
@@ -44,7 +44,7 @@ CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_JZ4740=y
CONFIG_MTD_UBI=y
CONFIG_NETDEVICES=y
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
index ed1038f62a2c..50632a3103dd 100644
--- a/arch/mips/configs/rb532_defconfig
+++ b/arch/mips/configs/rb532_defconfig
@@ -109,7 +109,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_ATA=y
# CONFIG_ATA_VERBOSE_ERROR is not set
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index b0f0c5f9ad9d..5e389db35fa7 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -39,7 +39,7 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_RBTX4939=y
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
CONFIG_MTD_NAND_TXX9NDFMC=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig
index 2bb02ea9fb4e..203db83c3ee9 100644
--- a/arch/mips/configs/xway_defconfig
+++ b/arch/mips/configs/xway_defconfig
@@ -81,7 +81,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_LANTIQ=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_XWAY=y
CONFIG_EEPROM_93CX6=m
CONFIG_SCSI=y
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index b5cc7426c21f..3da091f651d6 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -33,7 +33,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_NDFC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=35000
diff --git a/arch/powerpc/configs/40x/obs600_defconfig b/arch/powerpc/configs/40x/obs600_defconfig
index aac06d2ad01a..38d3d7769a2f 100644
--- a/arch/powerpc/configs/40x/obs600_defconfig
+++ b/arch/powerpc/configs/40x/obs600_defconfig
@@ -33,7 +33,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_NDFC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=35000
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index c8e6f048a122..d427cee027a6 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -32,7 +32,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_NDFC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=35000
diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig
index f6dc23fef683..f593258806ad 100644
--- a/arch/powerpc/configs/44x/eiger_defconfig
+++ b/arch/powerpc/configs/44x/eiger_defconfig
@@ -33,7 +33,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_NDFC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=35000
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index 1e04122912f3..f34fee9464e5 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -33,7 +33,7 @@ CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_NDFC=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=35000
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 6c02f53271cd..6ae88d4879bf 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -34,7 +34,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_NDFC=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 1f69f4edf074..9dffb2e7f735 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -31,7 +31,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 797fc3ffddee..a42232732c6d 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -31,7 +31,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
diff --git a/arch/powerpc/configs/85xx-hw.config b/arch/powerpc/configs/85xx-hw.config
index c03d0fb16665..9575a38c9155 100644
--- a/arch/powerpc/configs/85xx-hw.config
+++ b/arch/powerpc/configs/85xx-hw.config
@@ -71,7 +71,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PLATRAM=y
diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
index dd98f43b2fb8..d70b60314dad 100644
--- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig
+++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
@@ -73,7 +73,7 @@ CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 6106fadbbd8b..7037a6d8018c 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -31,7 +31,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_SOCRATES=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 2697e4e8a761..1c63cbdc3211 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -35,8 +35,8 @@ CONFIG_MTD=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_FSL_UPM=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 6531139a8a8d..78f5beb2928c 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -65,7 +65,7 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_NAND_FSL_UPM=y
CONFIG_BLK_DEV_LOOP=y
diff --git a/arch/powerpc/configs/86xx-hw.config b/arch/powerpc/configs/86xx-hw.config
index d3dd6b8865c0..151164cf8cb3 100644
--- a/arch/powerpc/configs/86xx-hw.config
+++ b/arch/powerpc/configs/86xx-hw.config
@@ -47,7 +47,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_NETDEVICES=y
CONFIG_NET_TULIP=y
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index e4bfb1101c0e..e4bf8aa87e60 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -46,7 +46,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_ROM=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_MPC5121_NFC=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index d1b82035d35f..005d00020fb9 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -46,7 +46,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 6daa56f8895c..c0423b2cf7c0 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -51,7 +51,7 @@ CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_PASEMI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 66dd6bf45cde..db48039e0b11 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -44,7 +44,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
CONFIG_MTD_NAND_NDFC=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 72b72e50a92e..0ef3f1f9de5c 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -35,7 +35,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_SH_FLCTL=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index 3568310c2c2f..ba67e3752938 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -38,7 +38,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index e04f21be0756..121a75d65fb4 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -34,7 +34,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
index d16e9334cd98..5209889765ad 100644
--- a/arch/sh/configs/sdk7786_defconfig
+++ b/arch/sh/configs/sdk7786_defconfig
@@ -108,7 +108,7 @@ CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_PHRAM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_SH_FLCTL=m
CONFIG_MTD_UBI=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index aedb3a2d9a10..9f6d46d58554 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -37,7 +37,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index ceb48e9b70f4..822fa9e96f74 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -155,7 +155,7 @@ CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_RAM=y
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index c3748b414c27..0322df9dc249 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
+#include <soc/at91/atmel-sfr.h>
struct atmel_ebi_dev_config {
int cs;
@@ -36,6 +37,7 @@ struct atmel_ebi_dev {
struct atmel_ebi_caps {
unsigned int available_cs;
unsigned int ebi_csa_offs;
+ const char *regmap_name;
void (*get_config)(struct atmel_ebi_dev *ebid,
struct atmel_ebi_dev_config *conf);
int (*xlate_config)(struct atmel_ebi_dev *ebid,
@@ -47,7 +49,7 @@ struct atmel_ebi_caps {
struct atmel_ebi {
struct clk *clk;
- struct regmap *matrix;
+ struct regmap *regmap;
struct {
struct regmap *regmap;
struct clk *clk;
@@ -357,7 +359,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
* one "atmel,smc-" property is present.
*/
if (ebi->caps->ebi_csa_offs && apply)
- regmap_update_bits(ebi->matrix,
+ regmap_update_bits(ebi->regmap,
ebi->caps->ebi_csa_offs,
BIT(cs), 0);
@@ -372,6 +374,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
.available_cs = 0xff,
.ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -380,6 +383,7 @@ static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
.available_cs = 0xff,
.ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -388,6 +392,7 @@ static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -396,6 +401,7 @@ static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
.available_cs = 0x7,
.ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -404,6 +410,7 @@ static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -412,6 +419,7 @@ static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -420,6 +428,7 @@ static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
static const struct atmel_ebi_caps at91sam9x5_ebi_caps = {
.available_cs = 0x3f,
.ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA,
+ .regmap_name = "atmel,matrix",
.get_config = at91sam9_ebi_get_config,
.xlate_config = atmel_ebi_xslate_smc_config,
.apply_config = at91sam9_ebi_apply_config,
@@ -432,6 +441,15 @@ static const struct atmel_ebi_caps sama5d3_ebi_caps = {
.apply_config = sama5_ebi_apply_config,
};
+static const struct atmel_ebi_caps sam9x60_ebi_caps = {
+ .available_cs = 0x3f,
+ .ebi_csa_offs = AT91_SFR_CCFG_EBICSA,
+ .regmap_name = "microchip,sfr",
+ .get_config = at91sam9_ebi_get_config,
+ .xlate_config = atmel_ebi_xslate_smc_config,
+ .apply_config = at91sam9_ebi_apply_config,
+};
+
static const struct of_device_id atmel_ebi_id_table[] = {
{
.compatible = "atmel,at91sam9260-ebi",
@@ -465,6 +483,10 @@ static const struct of_device_id atmel_ebi_id_table[] = {
.compatible = "atmel,sama5d3-ebi",
.data = &sama5d3_ebi_caps,
},
+ {
+ .compatible = "microchip,sam9x60-ebi",
+ .data = &sam9x60_ebi_caps,
+ },
{ /* sentinel */ }
};
@@ -543,13 +565,14 @@ static int atmel_ebi_probe(struct platform_device *pdev)
/*
* The sama5d3 does not provide an EBICSA register and thus does need
- * to access the matrix registers.
+ * to access it.
*/
if (ebi->caps->ebi_csa_offs) {
- ebi->matrix =
- syscon_regmap_lookup_by_phandle(np, "atmel,matrix");
- if (IS_ERR(ebi->matrix))
- return PTR_ERR(ebi->matrix);
+ ebi->regmap =
+ syscon_regmap_lookup_by_phandle(np,
+ ebi->caps->regmap_name);
+ if (IS_ERR(ebi->regmap))
+ return PTR_ERR(ebi->regmap);
}
ret = of_property_read_u32(np, "#address-cells", &val);
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 79a8ff542883..fb31a7f649a3 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -60,22 +60,6 @@ config MTD_CMDLINE_PARTS
If unsure, say 'N'.
-config MTD_AFS_PARTS
- tristate "ARM Firmware Suite partition parsing"
- depends on (ARM || ARM64)
- help
- The ARM Firmware Suite allows the user to divide flash devices into
- multiple 'images'. Each such image has a header containing its name
- and offset/size etc.
-
- If you need code which can detect and parse these tables, and
- register MTD 'partitions' corresponding to each image detected,
- enable this option.
-
- You will still need the parsing functions to be called by the driver
- for your particular device. It won't happen automatically. The
- 'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
-
config MTD_OF_PARTS
tristate "OpenFirmware partitioning information support"
default y
@@ -94,6 +78,7 @@ config MTD_BCM63XX_PARTS
tristate "BCM63XX CFE partitioning support"
depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
select CRC32
+ select MTD_PARSER_IMAGETAG
help
This provides partition parsing for BCM63xx devices with CFE
bootloaders.
@@ -230,12 +215,11 @@ config SSFDC
This enables read only access to SmartMedia formatted NAND
flash. You can mount it with FAT file system.
-
config SM_FTL
tristate "SmartMedia/xD new translation layer"
depends on BLOCK
select MTD_BLKDEVS
- select MTD_NAND_ECC
+ select MTD_NAND_ECC_SW_HAMMING
help
This enables EXPERIMENTAL R/W support for SmartMedia/xD
FTL (Flash translation layer).
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 58fc327a5276..806287e80e84 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -9,7 +9,6 @@ mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
-obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
deleted file mode 100644
index d61b7edfc938..000000000000
--- a/drivers/mtd/afs.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*======================================================================
-
- drivers/mtd/afs.c: ARM Flash Layout/Partitioning
-
- Copyright © 2000 ARM Limited
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- This is access code for flashes using ARM's flash partitioning
- standards.
-
-======================================================================*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#define AFSV1_FOOTER_MAGIC 0xA0FFFF9F
-
-struct footer_v1 {
- u32 image_info_base; /* Address of first word of ImageFooter */
- u32 image_start; /* Start of area reserved by this footer */
- u32 signature; /* 'Magic' number proves it's a footer */
- u32 type; /* Area type: ARM Image, SIB, customer */
- u32 checksum; /* Just this structure */
-};
-
-struct image_info_v1 {
- u32 bootFlags; /* Boot flags, compression etc. */
- u32 imageNumber; /* Unique number, selects for boot etc. */
- u32 loadAddress; /* Address program should be loaded to */
- u32 length; /* Actual size of image */
- u32 address; /* Image is executed from here */
- char name[16]; /* Null terminated */
- u32 headerBase; /* Flash Address of any stripped header */
- u32 header_length; /* Length of header in memory */
- u32 headerType; /* AIF, RLF, s-record etc. */
- u32 checksum; /* Image checksum (inc. this struct) */
-};
-
-static u32 word_sum(void *words, int num)
-{
- u32 *p = words;
- u32 sum = 0;
-
- while (num--)
- sum += *p++;
-
- return sum;
-}
-
-static int
-afs_read_footer_v1(struct mtd_info *mtd, u_int *img_start, u_int *iis_start,
- u_int off, u_int mask)
-{
- struct footer_v1 fs;
- u_int ptr = off + mtd->erasesize - sizeof(fs);
- size_t sz;
- int ret;
-
- ret = mtd_read(mtd, ptr, sizeof(fs), &sz, (u_char *)&fs);
- if (ret >= 0 && sz != sizeof(fs))
- ret = -EINVAL;
-
- if (ret < 0) {
- printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
- ptr, ret);
- return ret;
- }
-
- /*
- * Does it contain the magic number?
- */
- if (fs.signature != AFSV1_FOOTER_MAGIC)
- return 0;
-
- /*
- * Check the checksum.
- */
- if (word_sum(&fs, sizeof(fs) / sizeof(u32)) != 0xffffffff)
- return 0;
-
- /*
- * Don't touch the SIB.
- */
- if (fs.type == 2)
- return 0;
-
- *iis_start = fs.image_info_base & mask;
- *img_start = fs.image_start & mask;
-
- /*
- * Check the image info base. This can not
- * be located after the footer structure.
- */
- if (*iis_start >= ptr)
- return 0;
-
- /*
- * Check the start of this image. The image
- * data can not be located after this block.
- */
- if (*img_start > off)
- return 0;
-
- return 1;
-}
-
-static int
-afs_read_iis_v1(struct mtd_info *mtd, struct image_info_v1 *iis, u_int ptr)
-{
- size_t sz;
- int ret, i;
-
- memset(iis, 0, sizeof(*iis));
- ret = mtd_read(mtd, ptr, sizeof(*iis), &sz, (u_char *)iis);
- if (ret < 0)
- goto failed;
-
- if (sz != sizeof(*iis)) {
- ret = -EINVAL;
- goto failed;
- }
-
- ret = 0;
-
- /*
- * Validate the name - it must be NUL terminated.
- */
- for (i = 0; i < sizeof(iis->name); i++)
- if (iis->name[i] == '\0')
- break;
-
- if (i < sizeof(iis->name))
- ret = 1;
-
- return ret;
-
- failed:
- printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
- ptr, ret);
- return ret;
-}
-
-static int parse_afs_partitions(struct mtd_info *mtd,
- const struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
-{
- struct mtd_partition *parts;
- u_int mask, off, idx, sz;
- int ret = 0;
- char *str;
-
- /*
- * This is the address mask; we use this to mask off out of
- * range address bits.
- */
- mask = mtd->size - 1;
-
- /*
- * First, calculate the size of the array we need for the
- * partition information. We include in this the size of
- * the strings.
- */
- for (idx = off = sz = 0; off < mtd->size; off += mtd->erasesize) {
- struct image_info_v1 iis;
- u_int iis_ptr, img_ptr;
-
- ret = afs_read_footer_v1(mtd, &img_ptr, &iis_ptr, off, mask);
- if (ret < 0)
- break;
- if (ret) {
- ret = afs_read_iis_v1(mtd, &iis, iis_ptr);
- if (ret < 0)
- break;
- if (ret == 0)
- continue;
-
- sz += sizeof(struct mtd_partition);
- sz += strlen(iis.name) + 1;
- idx += 1;
- }
- }
-
- if (!sz)
- return ret;
-
- parts = kzalloc(sz, GFP_KERNEL);
- if (!parts)
- return -ENOMEM;
-
- str = (char *)(parts + idx);
-
- /*
- * Identify the partitions
- */
- for (idx = off = 0; off < mtd->size; off += mtd->erasesize) {
- struct image_info_v1 iis;
- u_int iis_ptr, img_ptr;
-
- /* Read the footer. */
- ret = afs_read_footer_v1(mtd, &img_ptr, &iis_ptr, off, mask);
- if (ret < 0)
- break;
- if (ret == 0)
- continue;
-
- /* Read the image info block */
- ret = afs_read_iis_v1(mtd, &iis, iis_ptr);
- if (ret < 0)
- break;
- if (ret == 0)
- continue;
-
- strcpy(str, iis.name);
-
- parts[idx].name = str;
- parts[idx].size = (iis.length + mtd->erasesize - 1) & ~(mtd->erasesize - 1);
- parts[idx].offset = img_ptr;
- parts[idx].mask_flags = 0;
-
- printk(" mtd%d: at 0x%08x, %5lluKiB, %8u, %s\n",
- idx, img_ptr, parts[idx].size / 1024,
- iis.imageNumber, str);
-
- idx += 1;
- str = str + strlen(iis.name) + 1;
- }
-
- if (!idx) {
- kfree(parts);
- parts = NULL;
- }
-
- *pparts = parts;
- return idx ? idx : ret;
-}
-
-static struct mtd_part_parser afs_parser = {
- .parse_fn = parse_afs_partitions,
- .name = "afs",
-};
-module_mtd_part_parser(afs_parser);
-
-MODULE_AUTHOR("ARM Ltd");
-MODULE_DESCRIPTION("ARM Firmware Suite partition parser");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c
index 41d1d3149c61..b2bd04764e95 100644
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
@@ -34,6 +34,7 @@
#include <linux/vmalloc.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/of.h>
#define BCM963XX_CFE_BLOCK_SIZE SZ_64K /* always at least 64KiB */
@@ -93,51 +94,19 @@ static int bcm63xx_read_nvram(struct mtd_info *master,
return 0;
}
-static int bcm63xx_read_image_tag(struct mtd_info *master, const char *name,
- loff_t tag_offset, struct bcm_tag *buf)
-{
- int ret;
- size_t retlen;
- u32 computed_crc;
-
- ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
- if (ret)
- return ret;
-
- if (retlen != sizeof(*buf))
- return -EIO;
-
- computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
- offsetof(struct bcm_tag, header_crc));
- if (computed_crc == buf->header_crc) {
- STR_NULL_TERMINATE(buf->board_id);
- STR_NULL_TERMINATE(buf->tag_version);
-
- pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
- name, tag_offset, buf->tag_version, buf->board_id);
-
- return 0;
- }
-
- pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
- name, tag_offset, buf->header_crc, computed_crc);
- return 1;
-}
+static const char * const bcm63xx_cfe_part_types[] = {
+ "bcm963xx-imagetag",
+ NULL,
+};
static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
const struct mtd_partition **pparts, struct bcm963xx_nvram *nvram)
{
- /* CFE, NVRAM and global Linux are always present */
- int nrparts = 3, curpart = 0;
- struct bcm_tag *buf = NULL;
struct mtd_partition *parts;
- int ret;
- unsigned int rootfsaddr, kerneladdr, spareaddr;
- unsigned int rootfslen, kernellen, sparelen, totallen;
+ int nrparts = 3, curpart = 0;
unsigned int cfelen, nvramlen;
unsigned int cfe_erasesize;
int i;
- bool rootfs_first = false;
cfe_erasesize = max_t(uint32_t, master->erasesize,
BCM963XX_CFE_BLOCK_SIZE);
@@ -146,83 +115,9 @@ static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
nvramlen = nvram->psi_size * SZ_1K;
nvramlen = roundup(nvramlen, cfe_erasesize);
- buf = vmalloc(sizeof(struct bcm_tag));
- if (!buf)
- return -ENOMEM;
-
- /* Get the tag */
- ret = bcm63xx_read_image_tag(master, "rootfs", cfelen, buf);
- if (!ret) {
- STR_NULL_TERMINATE(buf->flash_image_start);
- if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
- rootfsaddr < BCM963XX_EXTENDED_SIZE) {
- pr_err("invalid rootfs address: %*ph\n",
- (int)sizeof(buf->flash_image_start),
- buf->flash_image_start);
- goto invalid_tag;
- }
-
- STR_NULL_TERMINATE(buf->kernel_address);
- if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
- kerneladdr < BCM963XX_EXTENDED_SIZE) {
- pr_err("invalid kernel address: %*ph\n",
- (int)sizeof(buf->kernel_address),
- buf->kernel_address);
- goto invalid_tag;
- }
-
- STR_NULL_TERMINATE(buf->kernel_length);
- if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
- pr_err("invalid kernel length: %*ph\n",
- (int)sizeof(buf->kernel_length),
- buf->kernel_length);
- goto invalid_tag;
- }
-
- STR_NULL_TERMINATE(buf->total_length);
- if (kstrtouint(buf->total_length, 10, &totallen)) {
- pr_err("invalid total length: %*ph\n",
- (int)sizeof(buf->total_length),
- buf->total_length);
- goto invalid_tag;
- }
-
- kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE;
- rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE;
- spareaddr = roundup(totallen, master->erasesize) + cfelen;
-
- if (rootfsaddr < kerneladdr) {
- /* default Broadcom layout */
- rootfslen = kerneladdr - rootfsaddr;
- rootfs_first = true;
- } else {
- /* OpenWrt layout */
- rootfsaddr = kerneladdr + kernellen;
- rootfslen = spareaddr - rootfsaddr;
- }
- } else if (ret > 0) {
-invalid_tag:
- kernellen = 0;
- rootfslen = 0;
- rootfsaddr = 0;
- spareaddr = cfelen;
- } else {
- goto out;
- }
- sparelen = master->size - spareaddr - nvramlen;
-
- /* Determine number of partitions */
- if (rootfslen > 0)
- nrparts++;
-
- if (kernellen > 0)
- nrparts++;
-
parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
- if (!parts) {
- ret = -ENOMEM;
- goto out;
- }
+ if (!parts)
+ return -ENOMEM;
/* Start building partition list */
parts[curpart].name = "CFE";
@@ -230,30 +125,6 @@ invalid_tag:
parts[curpart].size = cfelen;
curpart++;
- if (kernellen > 0) {
- int kernelpart = curpart;
-
- if (rootfslen > 0 && rootfs_first)
- kernelpart++;
- parts[kernelpart].name = "kernel";
- parts[kernelpart].offset = kerneladdr;
- parts[kernelpart].size = kernellen;
- curpart++;
- }
-
- if (rootfslen > 0) {
- int rootfspart = curpart;
-
- if (kernellen > 0 && rootfs_first)
- rootfspart--;
- parts[rootfspart].name = "rootfs";
- parts[rootfspart].offset = rootfsaddr;
- parts[rootfspart].size = rootfslen;
- if (sparelen > 0 && !rootfs_first)
- parts[rootfspart].size += sparelen;
- curpart++;
- }
-
parts[curpart].name = "nvram";
parts[curpart].offset = master->size - nvramlen;
parts[curpart].size = nvramlen;
@@ -263,22 +134,13 @@ invalid_tag:
parts[curpart].name = "linux";
parts[curpart].offset = cfelen;
parts[curpart].size = master->size - cfelen - nvramlen;
+ parts[curpart].types = bcm63xx_cfe_part_types;
for (i = 0; i < nrparts; i++)
pr_info("Partition %d is %s offset %llx and length %llx\n", i,
parts[i].name, parts[i].offset, parts[i].size);
- pr_info("Spare partition is offset %x and length %x\n", spareaddr,
- sparelen);
-
*pparts = parts;
- ret = 0;
-
-out:
- vfree(buf);
-
- if (ret)
- return ret;
return nrparts;
}
@@ -311,9 +173,16 @@ out:
return ret;
};
+static const struct of_device_id parse_bcm63xx_cfe_match_table[] = {
+ { .compatible = "brcm,bcm963xx-cfe-nor-partitions" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, parse_bcm63xx_cfe_match_table);
+
static struct mtd_part_parser bcm63xx_cfe_parser = {
.parse_fn = bcm63xx_parse_cfe_partitions,
.name = "bcm63xxpart",
+ .of_match_table = parse_bcm63xx_cfe_match_table,
};
module_mtd_part_parser(bcm63xx_cfe_parser);
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 7b7286b4d81e..c8fa5906bdf9 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -869,6 +869,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
/* Only if there's no operation suspended... */
if (mode == FL_READY && chip->oldstate == FL_READY)
return 0;
+ /* fall through */
default:
sleep:
@@ -2751,6 +2752,7 @@ static void cfi_amdstd_sync (struct mtd_info *mtd)
* as the whole point is that nobody can do anything
* with the chip now anyway.
*/
+ /* fall through */
case FL_SYNCING:
mutex_unlock(&chip->mutex);
break;
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 6f16552cd59f..e3b266ee06af 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -109,10 +109,13 @@ map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi
case 8:
onecmd |= (onecmd << (chip_mode * 32));
#endif
+ /* fall through */
case 4:
onecmd |= (onecmd << (chip_mode * 16));
+ /* fall through */
case 2:
onecmd |= (onecmd << (chip_mode * 8));
+ /* fall through */
case 1:
;
}
@@ -162,10 +165,13 @@ unsigned long cfi_merge_status(map_word val, struct map_info *map,
case 8:
res |= (onestat >> (chip_mode * 32));
#endif
+ /* fall through */
case 4:
res |= (onestat >> (chip_mode * 16));
+ /* fall through */
case 2:
res |= (onestat >> (chip_mode * 8));
+ /* fall through */
case 1:
;
}
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index aa983422aa97..f9258d666846 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -207,7 +207,7 @@ comment "Disk-On-Chip Device Drivers"
config MTD_DOCG3
tristate "M-Systems Disk-On-Chip G3"
select BCH
- select BCH_CONST_PARAMS if !MTD_NAND_BCH
+ select BCH_CONST_PARAMS if !MTD_NAND_ECC_SW_BCH
select BITREVERSE
help
This provides an MTD device driver for the M-Systems DiskOnChip
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 9ee04b5f9311..8a8627c30aed 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -147,8 +147,10 @@ static int parse_num64(uint64_t *num64, char *token)
switch (token[len - 2]) {
case 'G':
shift += 10;
+ /* fall through */
case 'M':
shift += 10;
+ /* fall through */
case 'k':
shift += 10;
token[len - 2] = 0;
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index b13557fe52bd..76a4c73e100e 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -318,6 +318,7 @@ static int chip_ready(struct map_info *map, struct flchip *chip, int mode)
/* Only if there's no operation suspended... */
if (mode == FL_READY && chip->oldstate == FL_READY)
return 0;
+ /* fall through */
default:
sleep:
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index e0cf869c8544..544ed1931843 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -10,7 +10,7 @@ config MTD_COMPLEX_MAPPINGS
config MTD_PHYSMAP
tristate "Flash device in physical memory map"
- depends on MTD_CFI || MTD_JEDECPROBE || MTD_ROM || MTD_LPDDR
+ depends on MTD_CFI || MTD_JEDECPROBE || MTD_ROM || MTD_RAM || MTD_LPDDR
help
This provides a 'mapping' driver which allows the NOR Flash and
ROM driver code to communicate with chips which are mapped
diff --git a/drivers/mtd/maps/physmap-core.c b/drivers/mtd/maps/physmap-core.c
index d9a3e4bebe5d..21b556afc305 100644
--- a/drivers/mtd/maps/physmap-core.c
+++ b/drivers/mtd/maps/physmap-core.c
@@ -132,6 +132,8 @@ static void physmap_set_addr_gpios(struct physmap_flash_info *info,
gpiod_set_value(info->gpios->desc[i], !!(BIT(i) & ofs));
}
+
+ info->gpio_values = ofs;
}
#define win_mask(order) (BIT(order) - 1)
diff --git a/drivers/mtd/maps/physmap-gemini.c b/drivers/mtd/maps/physmap-gemini.c
index 60775b208fc9..a289c8b5cabf 100644
--- a/drivers/mtd/maps/physmap-gemini.c
+++ b/drivers/mtd/maps/physmap-gemini.c
@@ -86,7 +86,7 @@ static void gemini_flash_disable_pins(void)
static map_word __xipram gemini_flash_map_read(struct map_info *map,
unsigned long ofs)
{
- map_word __xipram ret;
+ map_word ret;
gemini_flash_enable_pins();
ret = inline_map_read(map, ofs);
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index aef030ca8601..de4c46318abb 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -31,13 +31,7 @@
#define MAP_NAME "ram"
#endif
-/*
- * Blackfin uses uclinux_ram_map during startup, so it must not be static.
- * Provide a dummy declaration to make sparse happy.
- */
-extern struct map_info uclinux_ram_map;
-
-struct map_info uclinux_ram_map = {
+static struct map_info uclinux_ram_map = {
.name = MAP_NAME,
.size = 0,
};
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 37f174ccbcec..dfa241ad018b 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -572,7 +572,7 @@ static ssize_t mtd_partition_offset_show(struct device *dev,
{
struct mtd_info *mtd = dev_get_drvdata(dev);
struct mtd_part *part = mtd_to_part(mtd);
- return snprintf(buf, PAGE_SIZE, "%lld\n", part->offset);
+ return snprintf(buf, PAGE_SIZE, "%llu\n", part->offset);
}
static DEVICE_ATTR(offset, S_IRUGO, mtd_partition_offset_show, NULL);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 9033215e62ea..495751ed3fd7 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -2,6 +2,5 @@ config MTD_NAND_CORE
tristate
source "drivers/mtd/nand/onenand/Kconfig"
-
source "drivers/mtd/nand/raw/Kconfig"
source "drivers/mtd/nand/spi/Kconfig"
diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c
index 9c9f8936b63b..b6de955ac8bf 100644
--- a/drivers/mtd/nand/core.c
+++ b/drivers/mtd/nand/core.c
@@ -174,6 +174,40 @@ int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo)
EXPORT_SYMBOL_GPL(nanddev_mtd_erase);
/**
+ * nanddev_mtd_max_bad_blocks() - Get the maximum number of bad eraseblock on
+ * a specific region of the NAND device
+ * @mtd: MTD device
+ * @offs: offset of the NAND region
+ * @len: length of the NAND region
+ *
+ * Default implementation for mtd->_max_bad_blocks(). Only works if
+ * nand->memorg.max_bad_eraseblocks_per_lun is > 0.
+ *
+ * Return: a positive number encoding the maximum number of eraseblocks on a
+ * portion of memory, a negative error code otherwise.
+ */
+int nanddev_mtd_max_bad_blocks(struct mtd_info *mtd, loff_t offs, size_t len)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ struct nand_pos pos, end;
+ unsigned int max_bb = 0;
+
+ if (!nand->memorg.max_bad_eraseblocks_per_lun)
+ return -ENOTSUPP;
+
+ nanddev_offs_to_pos(nand, offs, &pos);
+ nanddev_offs_to_pos(nand, offs + len, &end);
+
+ for (nanddev_offs_to_pos(nand, offs, &pos);
+ nanddev_pos_cmp(&pos, &end) < 0;
+ nanddev_pos_next_lun(nand, &pos))
+ max_bb += nand->memorg.max_bad_eraseblocks_per_lun;
+
+ return max_bb;
+}
+EXPORT_SYMBOL_GPL(nanddev_mtd_max_bad_blocks);
+
+/**
* nanddev_init() - Initialize a NAND device
* @nand: NAND device
* @ops: NAND device operations
diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
index 4ca4b194e7d7..f41d76248550 100644
--- a/drivers/mtd/nand/onenand/onenand_base.c
+++ b/drivers/mtd/nand/onenand/onenand_base.c
@@ -2458,7 +2458,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
/* We write two bytes, so we don't have to mess with 16-bit access */
- ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
+ ofs += mtd->oobsize + (this->badblockpos & ~0x01);
/* FIXME : What to do when marking SLC block in partition
* with MLC erasesize? For now, it is not advisable to
* create partitions containing both SLC and MLC regions.
@@ -3967,6 +3967,9 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
if (!(this->options & ONENAND_SKIP_INITIAL_UNLOCKING))
this->unlock_all(mtd);
+ /* Set the bad block marker position */
+ this->badblockpos = ONENAND_BADBLOCK_POS;
+
ret = this->scan_bbt(mtd);
if ((!FLEXONENAND(this)) || ret)
return ret;
diff --git a/drivers/mtd/nand/onenand/onenand_bbt.c b/drivers/mtd/nand/onenand/onenand_bbt.c
index dde20487937d..57c31c81be18 100644
--- a/drivers/mtd/nand/onenand/onenand_bbt.c
+++ b/drivers/mtd/nand/onenand/onenand_bbt.c
@@ -190,9 +190,6 @@ static int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
if (!bbm->bbt)
return -ENOMEM;
- /* Set the bad block position */
- bbm->badblockpos = ONENAND_BADBLOCK_POS;
-
/* Set erase shift */
bbm->bbt_erase_shift = this->erase_shift;
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index e604625e2dfa..0500c42f31cb 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -1,34 +1,29 @@
-config MTD_NAND_ECC
+config MTD_NAND_ECC_SW_HAMMING
tristate
-config MTD_NAND_ECC_SMC
+config MTD_NAND_ECC_SW_HAMMING_SMC
bool "NAND ECC Smart Media byte order"
- depends on MTD_NAND_ECC
+ depends on MTD_NAND_ECC_SW_HAMMING
default n
help
Software ECC according to the Smart Media Specification.
The original Linux implementation had byte 0 and 1 swapped.
-
-menuconfig MTD_NAND
+menuconfig MTD_RAW_NAND
tristate "Raw/Parallel NAND Device Support"
depends on MTD
- select MTD_NAND_ECC
+ select MTD_NAND_CORE
+ select MTD_NAND_ECC_SW_HAMMING
help
This enables support for accessing all type of raw/parallel
NAND flash devices. For further information see
<http://www.linux-mtd.infradead.org/doc/nand.html>.
-if MTD_NAND
+if MTD_RAW_NAND
-config MTD_NAND_BCH
- tristate
- select BCH
- depends on MTD_NAND_ECC_BCH
- default MTD_NAND
-
-config MTD_NAND_ECC_BCH
+config MTD_NAND_ECC_SW_BCH
bool "Support software BCH ECC"
+ select BCH
default n
help
This enables support for software BCH error correction. Binary BCH
@@ -36,15 +31,13 @@ config MTD_NAND_ECC_BCH
ECC codes. They are used with NAND devices requiring more than 1 bit
of error correction.
-config MTD_SM_COMMON
- tristate
- default n
+comment "Raw/parallel NAND flash controllers"
config MTD_NAND_DENALI
tristate
config MTD_NAND_DENALI_PCI
- tristate "Support Denali NAND controller on Intel Moorestown"
+ tristate "Denali NAND controller on Intel Moorestown"
select MTD_NAND_DENALI
depends on PCI
help
@@ -52,31 +45,22 @@ config MTD_NAND_DENALI_PCI
Denali NAND controller core.
config MTD_NAND_DENALI_DT
- tristate "Support Denali NAND controller as a DT device"
+ tristate "Denali NAND controller as a DT device"
select MTD_NAND_DENALI
depends on HAS_DMA && HAVE_CLK && OF
help
Enable the driver for NAND flash on platforms using a Denali NAND
controller as a DT device.
-config MTD_NAND_GPIO
- tristate "GPIO assisted NAND Flash driver"
- depends on GPIOLIB || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This enables a NAND flash driver where control signals are
- connected to GPIO pins, and commands and data are communicated
- via a memory mapped interface.
-
config MTD_NAND_AMS_DELTA
- tristate "NAND Flash device on Amstrad E3"
+ tristate "Amstrad E3 NAND controller"
depends on MACH_AMS_DELTA || COMPILE_TEST
default y
help
Support for NAND flash on Amstrad E3 (Delta).
config MTD_NAND_OMAP2
- tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone"
+ tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller"
depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
depends on HAS_IOMEM
help
@@ -98,18 +82,6 @@ config MTD_NAND_OMAP_BCH
config MTD_NAND_OMAP_BCH_BUILD
def_tristate MTD_NAND_OMAP2 && MTD_NAND_OMAP_BCH
-config MTD_NAND_RICOH
- tristate "Ricoh xD card reader"
- default n
- depends on PCI
- select MTD_SM_COMMON
- help
- Enable support for Ricoh R5C852 xD card reader
- You also need to enable ether
- NAND SSFDC (SmartMedia) read only translation layer' or new
- expermental, readwrite
- 'SmartMedia/xD new translation layer'
-
config MTD_NAND_AU1550
tristate "Au1550/1200 NAND support"
depends on MIPS_ALCHEMY
@@ -117,8 +89,15 @@ config MTD_NAND_AU1550
This enables the driver for the NAND flash controller on the
AMD/Alchemy 1550 SOC.
+config MTD_NAND_NDFC
+ tristate "IBM/MCC 4xx NAND controller"
+ depends on 4xx
+ select MTD_NAND_ECC_SW_HAMMING_SMC
+ help
+ NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
+
config MTD_NAND_S3C2410
- tristate "NAND Flash support for Samsung S3C SoCs"
+ tristate "Samsung S3C NAND controller"
depends on ARCH_S3C24XX || ARCH_S3C64XX
help
This enables the NAND flash controller on the S3C24xx and S3C64xx
@@ -128,18 +107,11 @@ config MTD_NAND_S3C2410
must advertise a platform_device for the driver to attach.
config MTD_NAND_S3C2410_DEBUG
- bool "Samsung S3C NAND driver debug"
+ bool "Samsung S3C NAND controller debug"
depends on MTD_NAND_S3C2410
help
Enable debugging of the S3C NAND driver
-config MTD_NAND_NDFC
- tristate "NDFC NanD Flash Controller"
- depends on 4xx
- select MTD_NAND_ECC_SMC
- help
- NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
-
config MTD_NAND_S3C2410_CLKSTOP
bool "Samsung S3C NAND IDLE clock stop"
depends on MTD_NAND_S3C2410
@@ -151,89 +123,19 @@ config MTD_NAND_S3C2410_CLKSTOP
approximately 5mA of power when there is nothing happening.
config MTD_NAND_TANGO
- tristate "NAND Flash support for Tango chips"
+ tristate "Tango NAND controller"
depends on ARCH_TANGO || COMPILE_TEST
depends on HAS_IOMEM
help
Enables the NAND Flash controller on Tango chips.
-config MTD_NAND_DISKONCHIP
- tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)"
- depends on HAS_IOMEM
- select REED_SOLOMON
- select REED_SOLOMON_DEC16
- help
- This is a reimplementation of M-Systems DiskOnChip 2000,
- Millennium and Millennium Plus as a standard NAND device driver,
- as opposed to the earlier self-contained MTD device drivers.
- This should enable, among other things, proper JFFS2 operation on
- these devices.
-
-config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
- bool "Advanced detection options for DiskOnChip"
- depends on MTD_NAND_DISKONCHIP
- help
- This option allows you to specify nonstandard address at which to
- probe for a DiskOnChip, or to change the detection options. You
- are unlikely to need any of this unless you are using LinuxBIOS.
- Say 'N'.
-
-config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
- hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
- depends on MTD_NAND_DISKONCHIP
- default "0"
- help
- By default, the probe for DiskOnChip devices will look for a
- DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
- This option allows you to specify a single address at which to probe
- for the device, which is useful if you have other devices in that
- range which get upset when they are probed.
-
- (Note that on PowerPC, the normal probe will only check at
- 0xE4000000.)
-
- Normally, you should leave this set to zero, to allow the probe at
- the normal addresses.
-
-config MTD_NAND_DISKONCHIP_PROBE_HIGH
- bool "Probe high addresses"
- depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
- help
- By default, the probe for DiskOnChip devices will look for a
- DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
- This option changes to make it probe between 0xFFFC8000 and
- 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be
- useful to you. Say 'N'.
-
-config MTD_NAND_DISKONCHIP_BBTWRITE
- bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
- depends on MTD_NAND_DISKONCHIP
- help
- On DiskOnChip devices shipped with the INFTL filesystem (Millennium
- and 2000 TSOP/Alon), Linux reserves some space at the end of the
- device for the Bad Block Table (BBT). If you have existing INFTL
- data on your device (created by non-Linux tools such as M-Systems'
- DOS drivers), your data might overlap the area Linux wants to use for
- the BBT. If this is a concern for you, leave this option disabled and
- Linux will not write BBT data into this area.
- The downside of leaving this option disabled is that if bad blocks
- are detected by Linux, they will not be recorded in the BBT, which
- could cause future problems.
- Once you enable this option, new filesystems (INFTL or others, created
- in Linux or other operating systems) will not use the reserved area.
- The only reason not to enable this option is to prevent damage to
- preexisting filesystems.
- Even if you leave this disabled, you can enable BBT writes at module
- load time (assuming you build diskonchip as a module) with the module
- parameter "inftl_bbt_write=1".
-
config MTD_NAND_SHARPSL
- tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
+ tristate "Sharp SL Series (C7xx + others) NAND controller"
depends on ARCH_PXA || COMPILE_TEST
depends on HAS_IOMEM
config MTD_NAND_CAFE
- tristate "NAND support for OLPC CAFÉ chip"
+ tristate "OLPC CAFÉ NAND controller"
depends on PCI
select REED_SOLOMON
select REED_SOLOMON_DEC16
@@ -242,7 +144,7 @@ config MTD_NAND_CAFE
laptop.
config MTD_NAND_CS553X
- tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
+ tristate "CS5535/CS5536 (AMD Geode companion) NAND controller"
depends on X86_32
depends on !UML && HAS_IOMEM
help
@@ -256,7 +158,7 @@ config MTD_NAND_CS553X
If you say "m", the module will be called cs553x_nand.
config MTD_NAND_ATMEL
- tristate "Support for NAND Flash / SmartMedia on AT91"
+ tristate "Atmel AT91 NAND Flash/SmartMedia NAND controller"
depends on ARCH_AT91 || COMPILE_TEST
depends on HAS_IOMEM
select GENERIC_ALLOCATOR
@@ -265,8 +167,17 @@ config MTD_NAND_ATMEL
Enables support for NAND Flash / Smart Media Card interface
on Atmel AT91 processors.
+config MTD_NAND_ORION
+ tristate "Marvell Orion NAND controller"
+ depends on PLAT_ORION
+ help
+ This enables the NAND flash controller on Orion machines.
+
+ No board specific support is done by this driver, each board
+ must advertise a platform_device for the driver to attach.
+
config MTD_NAND_MARVELL
- tristate "NAND controller support on Marvell boards"
+ tristate "Marvell EBU NAND controller"
depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \
COMPILE_TEST
depends on HAS_IOMEM
@@ -278,7 +189,7 @@ config MTD_NAND_MARVELL
- 64-bit Aramda platforms (7k, 8k) (NFCv2)
config MTD_NAND_SLC_LPC32XX
- tristate "NXP LPC32xx SLC Controller"
+ tristate "NXP LPC32xx SLC NAND controller"
depends on ARCH_LPC32XX || COMPILE_TEST
depends on HAS_IOMEM
help
@@ -290,7 +201,7 @@ config MTD_NAND_SLC_LPC32XX
by the SLC NAND controller.
config MTD_NAND_MLC_LPC32XX
- tristate "NXP LPC32xx MLC Controller"
+ tristate "NXP LPC32xx MLC NAND controller"
depends on ARCH_LPC32XX || COMPILE_TEST
depends on HAS_IOMEM
help
@@ -302,38 +213,23 @@ config MTD_NAND_MLC_LPC32XX
by the MLC NAND controller.
config MTD_NAND_CM_X270
- tristate "Support for NAND Flash on CM-X270 modules"
+ tristate "CM-X270 modules NAND controller"
depends on MACH_ARMCORE
config MTD_NAND_PASEMI
- tristate "NAND support for PA Semi PWRficient"
+ tristate "PA Semi PWRficient NAND controller"
depends on PPC_PASEMI
help
Enables support for NAND Flash interface on PA Semi PWRficient
based boards
config MTD_NAND_TMIO
- tristate "NAND Flash device on Toshiba Mobile IO Controller"
+ tristate "Toshiba Mobile IO NAND controller"
depends on MFD_TMIO
help
Support for NAND flash connected to a Toshiba Mobile IO
Controller in some PDAs, including the Sharp SL6000x.
-config MTD_NAND_NANDSIM
- tristate "Support for NAND Flash Simulator"
- help
- The simulator may simulate various NAND flash chips for the
- MTD nand layer.
-
-config MTD_NAND_GPMI_NAND
- tristate "GPMI NAND Flash Controller driver"
- depends on MXS_DMA
- help
- Enables NAND Flash support for IMX23, IMX28 or IMX6.
- The GPMI controller is very powerful, with the help of BCH
- module, it can do the hardware ECC. The GPMI supports several
- NAND flashs at the same time.
-
config MTD_NAND_BRCMNAND
tristate "Broadcom STB NAND controller"
depends on ARM || ARM64 || MIPS || COMPILE_TEST
@@ -344,7 +240,7 @@ config MTD_NAND_BRCMNAND
BCM3xxx, BCM63xxx, iProc/Cygnus and more.
config MTD_NAND_BCM47XXNFLASH
- tristate "Support for NAND flash on BCM4706 BCMA bus"
+ tristate "BCM4706 BCMA NAND controller"
depends on BCMA_NFLASH
depends on BCMA
help
@@ -352,32 +248,31 @@ config MTD_NAND_BCM47XXNFLASH
registered by bcma as platform devices. This enables driver for
NAND flash memories. For now only BCM4706 is supported.
-config MTD_NAND_PLATFORM
- tristate "Support for generic platform NAND driver"
+config MTD_NAND_OXNAS
+ tristate "Oxford Semiconductor NAND controller"
+ depends on ARCH_OXNAS || COMPILE_TEST
depends on HAS_IOMEM
help
- This implements a generic NAND driver for on-SOC platform
- devices. You will need to provide platform-specific functions
- via platform_data.
+ This enables the NAND flash controller on Oxford Semiconductor SoCs.
-config MTD_NAND_ORION
- tristate "NAND Flash support for Marvell Orion SoC"
- depends on PLAT_ORION
+config MTD_NAND_MPC5121_NFC
+ tristate "MPC5121 NAND controller"
+ depends on PPC_MPC512x
help
- This enables the NAND flash controller on Orion machines.
-
- No board specific support is done by this driver, each board
- must advertise a platform_device for the driver to attach.
+ This enables the driver for the NAND flash controller on the
+ MPC5121 SoC.
-config MTD_NAND_OXNAS
- tristate "NAND Flash support for Oxford Semiconductor SoC"
- depends on ARCH_OXNAS || COMPILE_TEST
- depends on HAS_IOMEM
+config MTD_NAND_GPMI_NAND
+ tristate "Freescale GPMI NAND controller"
+ depends on MXS_DMA
help
- This enables the NAND flash controller on Oxford Semiconductor SoCs.
+ Enables NAND Flash support for IMX23, IMX28 or IMX6.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time.
config MTD_NAND_FSL_ELBC
- tristate "NAND support for Freescale eLBC controllers"
+ tristate "Freescale eLBC NAND controller"
depends on FSL_SOC
select FSL_LBC
help
@@ -387,7 +282,7 @@ config MTD_NAND_FSL_ELBC
external NAND devices.
config MTD_NAND_FSL_IFC
- tristate "NAND support for Freescale IFC controller"
+ tristate "Freescale IFC NAND controller"
depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
depends on HAS_IOMEM
select FSL_IFC
@@ -399,22 +294,15 @@ config MTD_NAND_FSL_IFC
external NAND devices.
config MTD_NAND_FSL_UPM
- tristate "Support for NAND on Freescale UPM"
+ tristate "Freescale UPM NAND controller"
depends on PPC_83xx || PPC_85xx
select FSL_LBC
help
Enables support for NAND Flash chips wired onto Freescale PowerPC
processor localbus with User-Programmable Machine support.
-config MTD_NAND_MPC5121_NFC
- tristate "MPC5121 built-in NAND Flash Controller support"
- depends on PPC_MPC512x
- help
- This enables the driver for the NAND flash controller on the
- MPC5121 SoC.
-
config MTD_NAND_VF610_NFC
- tristate "Support for Freescale NFC for VF610/MPC5125"
+ tristate "Freescale VF610/MPC5125 NAND controller"
depends on (SOC_VF610 || COMPILE_TEST)
depends on HAS_IOMEM
help
@@ -426,7 +314,7 @@ config MTD_NAND_VF610_NFC
device tree.
config MTD_NAND_MXC
- tristate "MXC NAND support"
+ tristate "Freescale MXC NAND controller"
depends on ARCH_MXC || COMPILE_TEST
depends on HAS_IOMEM
help
@@ -434,7 +322,7 @@ config MTD_NAND_MXC
MXC processors.
config MTD_NAND_SH_FLCTL
- tristate "Support for NAND on Renesas SuperH FLCTL"
+ tristate "Renesas SuperH FLCTL NAND controller"
depends on SUPERH || COMPILE_TEST
depends on HAS_IOMEM
help
@@ -442,7 +330,7 @@ config MTD_NAND_SH_FLCTL
for NAND Flash using FLCTL.
config MTD_NAND_DAVINCI
- tristate "Support NAND on DaVinci/Keystone SoC"
+ tristate "DaVinci/Keystone NAND controller"
depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST
depends on HAS_IOMEM
help
@@ -450,42 +338,30 @@ config MTD_NAND_DAVINCI
DaVinci/Keystone processors.
config MTD_NAND_TXX9NDFMC
- tristate "NAND Flash support for TXx9 SoC"
+ tristate "TXx9 NAND controller"
depends on SOC_TX4938 || SOC_TX4939 || COMPILE_TEST
depends on HAS_IOMEM
help
This enables the NAND flash controller on the TXx9 SoCs.
config MTD_NAND_SOCRATES
- tristate "Support for NAND on Socrates board"
+ tristate "Socrates NAND controller"
depends on SOCRATES
help
Enables support for NAND Flash chips wired onto Socrates board.
config MTD_NAND_NUC900
- tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
+ tristate "Nuvoton NUC9xx/w90p910 NAND controller"
depends on ARCH_W90X900 || COMPILE_TEST
depends on HAS_IOMEM
help
This enables the driver for the NAND Flash on evaluation board based
on w90p910 / NUC9xx.
-config MTD_NAND_JZ4740
- tristate "Support for JZ4740 SoC NAND controller"
- depends on MACH_JZ4740 || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Enables support for NAND Flash on JZ4740 SoC based boards.
-
-config MTD_NAND_JZ4780
- tristate "Support for NAND on JZ4780 SoC"
- depends on JZ4780_NEMC
- help
- Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
- based boards, using the BCH controller for hardware error correction.
+source "drivers/mtd/nand/raw/ingenic/Kconfig"
config MTD_NAND_FSMC
- tristate "Support for NAND on ST Micros FSMC"
+ tristate "ST Micros FSMC NAND controller"
depends on OF && HAS_IOMEM
depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 || \
COMPILE_TEST
@@ -494,28 +370,28 @@ config MTD_NAND_FSMC
Flexible Static Memory Controller (FSMC)
config MTD_NAND_XWAY
- bool "Support for NAND on Lantiq XWAY SoC"
+ bool "Lantiq XWAY NAND controller"
depends on LANTIQ && SOC_TYPE_XWAY
help
Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
to the External Bus Unit (EBU).
config MTD_NAND_SUNXI
- tristate "Support for NAND on Allwinner SoCs"
+ tristate "Allwinner NAND controller"
depends on ARCH_SUNXI || COMPILE_TEST
depends on HAS_IOMEM
help
Enables support for NAND Flash chips on Allwinner SoCs.
config MTD_NAND_HISI504
- tristate "Support for NAND controller on Hisilicon SoC Hip04"
+ tristate "Hisilicon Hip04 NAND controller"
depends on ARCH_HISI || COMPILE_TEST
depends on HAS_IOMEM
help
Enables support for NAND controller on Hisilicon SoC Hip04.
config MTD_NAND_QCOM
- tristate "Support for NAND on QCOM SoCs"
+ tristate "QCOM NAND controller"
depends on ARCH_QCOM || COMPILE_TEST
depends on HAS_IOMEM
help
@@ -523,7 +399,7 @@ config MTD_NAND_QCOM
controller. This controller is found on IPQ806x SoC.
config MTD_NAND_MTK
- tristate "Support for NAND controller on MTK SoCs"
+ tristate "MTK NAND controller"
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on HAS_IOMEM
help
@@ -531,7 +407,7 @@ config MTD_NAND_MTK
This controller is found on mt27xx, mt81xx, mt65xx SoCs.
config MTD_NAND_TEGRA
- tristate "Support for NAND controller on NVIDIA Tegra"
+ tristate "NVIDIA Tegra NAND controller"
depends on ARCH_TEGRA || COMPILE_TEST
depends on HAS_IOMEM
help
@@ -558,4 +434,115 @@ config MTD_NAND_MESON
Enables support for NAND controller on Amlogic's Meson SoCs.
This controller is found on Meson SoCs.
-endif # MTD_NAND
+config MTD_NAND_GPIO
+ tristate "GPIO assisted NAND controller"
+ depends on GPIOLIB || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This enables a NAND flash driver where control signals are
+ connected to GPIO pins, and commands and data are communicated
+ via a memory mapped interface.
+
+config MTD_NAND_PLATFORM
+ tristate "Generic NAND controller"
+ depends on HAS_IOMEM
+ help
+ This implements a generic NAND driver for on-SOC platform
+ devices. You will need to provide platform-specific functions
+ via platform_data.
+
+comment "Misc"
+
+config MTD_SM_COMMON
+ tristate
+ default n
+
+config MTD_NAND_NANDSIM
+ tristate "Support for NAND Flash Simulator"
+ help
+ The simulator may simulate various NAND flash chips for the
+ MTD nand layer.
+
+config MTD_NAND_RICOH
+ tristate "Ricoh xD card reader"
+ default n
+ depends on PCI
+ select MTD_SM_COMMON
+ help
+ Enable support for Ricoh R5C852 xD card reader
+ You also need to enable ether
+ NAND SSFDC (SmartMedia) read only translation layer' or new
+ expermental, readwrite
+ 'SmartMedia/xD new translation layer'
+
+config MTD_NAND_DISKONCHIP
+ tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)"
+ depends on HAS_IOMEM
+ select REED_SOLOMON
+ select REED_SOLOMON_DEC16
+ help
+ This is a reimplementation of M-Systems DiskOnChip 2000,
+ Millennium and Millennium Plus as a standard NAND device driver,
+ as opposed to the earlier self-contained MTD device drivers.
+ This should enable, among other things, proper JFFS2 operation on
+ these devices.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ bool "Advanced detection options for DiskOnChip"
+ depends on MTD_NAND_DISKONCHIP
+ help
+ This option allows you to specify nonstandard address at which to
+ probe for a DiskOnChip, or to change the detection options. You
+ are unlikely to need any of this unless you are using LinuxBIOS.
+ Say 'N'.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
+ hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ depends on MTD_NAND_DISKONCHIP
+ default "0"
+ help
+ By default, the probe for DiskOnChip devices will look for a
+ DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+ This option allows you to specify a single address at which to probe
+ for the device, which is useful if you have other devices in that
+ range which get upset when they are probed.
+
+ (Note that on PowerPC, the normal probe will only check at
+ 0xE4000000.)
+
+ Normally, you should leave this set to zero, to allow the probe at
+ the normal addresses.
+
+config MTD_NAND_DISKONCHIP_PROBE_HIGH
+ bool "Probe high addresses"
+ depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ help
+ By default, the probe for DiskOnChip devices will look for a
+ DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+ This option changes to make it probe between 0xFFFC8000 and
+ 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be
+ useful to you. Say 'N'.
+
+config MTD_NAND_DISKONCHIP_BBTWRITE
+ bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
+ depends on MTD_NAND_DISKONCHIP
+ help
+ On DiskOnChip devices shipped with the INFTL filesystem (Millennium
+ and 2000 TSOP/Alon), Linux reserves some space at the end of the
+ device for the Bad Block Table (BBT). If you have existing INFTL
+ data on your device (created by non-Linux tools such as M-Systems'
+ DOS drivers), your data might overlap the area Linux wants to use for
+ the BBT. If this is a concern for you, leave this option disabled and
+ Linux will not write BBT data into this area.
+ The downside of leaving this option disabled is that if bad blocks
+ are detected by Linux, they will not be recorded in the BBT, which
+ could cause future problems.
+ Once you enable this option, new filesystems (INFTL or others, created
+ in Linux or other operating systems) will not use the reserved area.
+ The only reason not to enable this option is to prevent damage to
+ preexisting filesystems.
+ Even if you leave this disabled, you can enable BBT writes at module
+ load time (assuming you build diskonchip as a module) with the module
+ parameter "inftl_bbt_write=1".
+
+endif # MTD_RAW_NAND
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 5a5a72f0793e..efaf5cd25edc 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_MTD_NAND) += nand.o
-obj-$(CONFIG_MTD_NAND_ECC) += nand_ecc.o
-obj-$(CONFIG_MTD_NAND_BCH) += nand_bch.o
+obj-$(CONFIG_MTD_RAW_NAND) += nand.o
+obj-$(CONFIG_MTD_NAND_ECC_SW_HAMMING) += nand_ecc.o
+nand-$(CONFIG_MTD_NAND_ECC_SW_BCH) += nand_bch.o
obj-$(CONFIG_MTD_SM_COMMON) += sm_common.o
obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o
@@ -45,8 +45,7 @@ obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
-obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
-obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o
+obj-y += ingenic/
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 5781fcf6b76c..8d6be90a6fe8 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2017 ATMEL
* Copyright 2017 Free Electrons
@@ -29,10 +30,6 @@
* Add Nand Flash Controller support for SAMA5 SoC
* Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* A few words about the naming convention in this file. This convention
* applies to structure and function names.
*
@@ -65,6 +62,7 @@
#include <linux/iopoll.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <soc/at91/atmel-sfr.h>
#include "pmecc.h"
@@ -211,6 +209,7 @@ struct atmel_nand_controller_caps {
bool legacy_of_bindings;
u32 ale_offs;
u32 cle_offs;
+ const char *ebi_csa_regmap_name;
const struct atmel_nand_controller_ops *ops;
};
@@ -231,10 +230,15 @@ to_nand_controller(struct nand_controller *ctl)
return container_of(ctl, struct atmel_nand_controller, base);
}
+struct atmel_smc_nand_ebi_csa_cfg {
+ u32 offs;
+ u32 nfd0_on_d16;
+};
+
struct atmel_smc_nand_controller {
struct atmel_nand_controller base;
- struct regmap *matrix;
- unsigned int ebi_csa_offs;
+ struct regmap *ebi_csa_regmap;
+ struct atmel_smc_nand_ebi_csa_cfg *ebi_csa;
};
static inline struct atmel_smc_nand_controller *
@@ -1068,15 +1072,15 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
else if (chip->ecc.strength)
req.ecc.strength = chip->ecc.strength;
- else if (chip->ecc_strength_ds)
- req.ecc.strength = chip->ecc_strength_ds;
+ else if (chip->base.eccreq.strength)
+ req.ecc.strength = chip->base.eccreq.strength;
else
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
if (chip->ecc.size)
req.ecc.sectorsize = chip->ecc.size;
- else if (chip->ecc_step_ds)
- req.ecc.sectorsize = chip->ecc_step_ds;
+ else if (chip->base.eccreq.step_size)
+ req.ecc.sectorsize = chip->base.eccreq.step_size;
else
req.ecc.sectorsize = ATMEL_PMECC_SECTOR_SIZE_AUTO;
@@ -1507,13 +1511,20 @@ static void atmel_smc_nand_init(struct atmel_nand_controller *nc,
atmel_nand_init(nc, nand);
smc_nc = to_smc_nand_controller(chip->controller);
- if (!smc_nc->matrix)
+ if (!smc_nc->ebi_csa_regmap)
return;
/* Attach the CS to the NAND Flash logic. */
for (i = 0; i < nand->numcs; i++)
- regmap_update_bits(smc_nc->matrix, smc_nc->ebi_csa_offs,
+ regmap_update_bits(smc_nc->ebi_csa_regmap,
+ smc_nc->ebi_csa->offs,
BIT(nand->cs[i].id), BIT(nand->cs[i].id));
+
+ if (smc_nc->ebi_csa->nfd0_on_d16)
+ regmap_update_bits(smc_nc->ebi_csa_regmap,
+ smc_nc->ebi_csa->offs,
+ smc_nc->ebi_csa->nfd0_on_d16,
+ smc_nc->ebi_csa->nfd0_on_d16);
}
static void atmel_hsmc_nand_init(struct atmel_nand_controller *nc,
@@ -1797,7 +1808,7 @@ static int atmel_nand_controller_add_nands(struct atmel_nand_controller *nc)
ret = of_property_read_u32(np, "#size-cells", &val);
if (ret) {
- dev_err(dev, "missing #address-cells property\n");
+ dev_err(dev, "missing #size-cells property\n");
return ret;
}
@@ -1833,34 +1844,71 @@ static void atmel_nand_controller_cleanup(struct atmel_nand_controller *nc)
clk_put(nc->mck);
}
-static const struct of_device_id atmel_matrix_of_ids[] = {
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9260_ebi_csa = {
+ .offs = AT91SAM9260_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9261_ebi_csa = {
+ .offs = AT91SAM9261_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9263_ebi_csa = {
+ .offs = AT91SAM9263_MATRIX_EBI0CSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9rl_ebi_csa = {
+ .offs = AT91SAM9RL_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9g45_ebi_csa = {
+ .offs = AT91SAM9G45_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9n12_ebi_csa = {
+ .offs = AT91SAM9N12_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9x5_ebi_csa = {
+ .offs = AT91SAM9X5_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg sam9x60_ebi_csa = {
+ .offs = AT91_SFR_CCFG_EBICSA,
+ .nfd0_on_d16 = AT91_SFR_CCFG_NFD0_ON_D16,
+};
+
+static const struct of_device_id atmel_ebi_csa_regmap_of_ids[] = {
{
.compatible = "atmel,at91sam9260-matrix",
- .data = (void *)AT91SAM9260_MATRIX_EBICSA,
+ .data = &at91sam9260_ebi_csa,
},
{
.compatible = "atmel,at91sam9261-matrix",
- .data = (void *)AT91SAM9261_MATRIX_EBICSA,
+ .data = &at91sam9261_ebi_csa,
},
{
.compatible = "atmel,at91sam9263-matrix",
- .data = (void *)AT91SAM9263_MATRIX_EBI0CSA,
+ .data = &at91sam9263_ebi_csa,
},
{
.compatible = "atmel,at91sam9rl-matrix",
- .data = (void *)AT91SAM9RL_MATRIX_EBICSA,
+ .data = &at91sam9rl_ebi_csa,
},
{
.compatible = "atmel,at91sam9g45-matrix",
- .data = (void *)AT91SAM9G45_MATRIX_EBICSA,
+ .data = &at91sam9g45_ebi_csa,
},
{
.compatible = "atmel,at91sam9n12-matrix",
- .data = (void *)AT91SAM9N12_MATRIX_EBICSA,
+ .data = &at91sam9n12_ebi_csa,
},
{
.compatible = "atmel,at91sam9x5-matrix",
- .data = (void *)AT91SAM9X5_MATRIX_EBICSA,
+ .data = &at91sam9x5_ebi_csa,
+ },
+ {
+ .compatible = "microchip,sam9x60-sfr",
+ .data = &sam9x60_ebi_csa,
},
{ /* sentinel */ },
};
@@ -1982,37 +2030,38 @@ atmel_smc_nand_controller_init(struct atmel_smc_nand_controller *nc)
struct device_node *np;
int ret;
- /* We do not retrieve the matrix syscon when parsing old DTs. */
+ /* We do not retrieve the EBICSA regmap when parsing old DTs. */
if (nc->base.caps->legacy_of_bindings)
return 0;
- np = of_parse_phandle(dev->parent->of_node, "atmel,matrix", 0);
+ np = of_parse_phandle(dev->parent->of_node,
+ nc->base.caps->ebi_csa_regmap_name, 0);
if (!np)
return 0;
- match = of_match_node(atmel_matrix_of_ids, np);
+ match = of_match_node(atmel_ebi_csa_regmap_of_ids, np);
if (!match) {
of_node_put(np);
return 0;
}
- nc->matrix = syscon_node_to_regmap(np);
+ nc->ebi_csa_regmap = syscon_node_to_regmap(np);
of_node_put(np);
- if (IS_ERR(nc->matrix)) {
- ret = PTR_ERR(nc->matrix);
- dev_err(dev, "Could not get Matrix regmap (err = %d)\n", ret);
+ if (IS_ERR(nc->ebi_csa_regmap)) {
+ ret = PTR_ERR(nc->ebi_csa_regmap);
+ dev_err(dev, "Could not get EBICSA regmap (err = %d)\n", ret);
return ret;
}
- nc->ebi_csa_offs = (uintptr_t)match->data;
+ nc->ebi_csa = (struct atmel_smc_nand_ebi_csa_cfg *)match->data;
/*
* The at91sam9263 has 2 EBIs, if the NAND controller is under EBI1
- * add 4 to ->ebi_csa_offs.
+ * add 4 to ->ebi_csa->offs.
*/
if (of_device_is_compatible(dev->parent->of_node,
"atmel,at91sam9263-ebi1"))
- nc->ebi_csa_offs += 4;
+ nc->ebi_csa->offs += 4;
return 0;
}
@@ -2341,6 +2390,7 @@ static const struct atmel_nand_controller_ops at91rm9200_nc_ops = {
static const struct atmel_nand_controller_caps atmel_rm9200_nc_caps = {
.ale_offs = BIT(21),
.cle_offs = BIT(22),
+ .ebi_csa_regmap_name = "atmel,matrix",
.ops = &at91rm9200_nc_ops,
};
@@ -2355,12 +2405,14 @@ static const struct atmel_nand_controller_ops atmel_smc_nc_ops = {
static const struct atmel_nand_controller_caps atmel_sam9260_nc_caps = {
.ale_offs = BIT(21),
.cle_offs = BIT(22),
+ .ebi_csa_regmap_name = "atmel,matrix",
.ops = &atmel_smc_nc_ops,
};
static const struct atmel_nand_controller_caps atmel_sam9261_nc_caps = {
.ale_offs = BIT(22),
.cle_offs = BIT(21),
+ .ebi_csa_regmap_name = "atmel,matrix",
.ops = &atmel_smc_nc_ops,
};
@@ -2368,6 +2420,15 @@ static const struct atmel_nand_controller_caps atmel_sam9g45_nc_caps = {
.has_dma = true,
.ale_offs = BIT(21),
.cle_offs = BIT(22),
+ .ebi_csa_regmap_name = "atmel,matrix",
+ .ops = &atmel_smc_nc_ops,
+};
+
+static const struct atmel_nand_controller_caps microchip_sam9x60_nc_caps = {
+ .has_dma = true,
+ .ale_offs = BIT(21),
+ .cle_offs = BIT(22),
+ .ebi_csa_regmap_name = "microchip,sfr",
.ops = &atmel_smc_nc_ops,
};
@@ -2415,6 +2476,10 @@ static const struct of_device_id atmel_nand_controller_of_ids[] = {
.compatible = "atmel,sama5d3-nand-controller",
.data = &atmel_sama5_nc_caps,
},
+ {
+ .compatible = "microchip,sam9x60-nand-controller",
+ .data = &microchip_sam9x60_nc_caps,
+ },
/* Support for old/deprecated bindings: */
{
.compatible = "atmel,at91rm9200-nand",
diff --git a/drivers/mtd/nand/raw/atmel/pmecc.c b/drivers/mtd/nand/raw/atmel/pmecc.c
index 9d3997840889..cbb023bf00f7 100644
--- a/drivers/mtd/nand/raw/atmel/pmecc.c
+++ b/drivers/mtd/nand/raw/atmel/pmecc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2017 ATMEL
* Copyright 2017 Free Electrons
@@ -28,10 +29,6 @@
* Add Nand Flash Controller support for SAMA5 SoC
* Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* The PMECC is an hardware assisted BCH engine, which means part of the
* ECC algorithm is left to the software. The hardware/software repartition
* is explained in the "PMECC Controller Functional Description" chapter in
diff --git a/drivers/mtd/nand/raw/atmel/pmecc.h b/drivers/mtd/nand/raw/atmel/pmecc.h
index 808f1be0d6ad..7851c05126cf 100644
--- a/drivers/mtd/nand/raw/atmel/pmecc.h
+++ b/drivers/mtd/nand/raw/atmel/pmecc.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* © Copyright 2016 ATMEL
* © Copyright 2016 Free Electrons
@@ -28,11 +29,6 @@
*
* Add Nand Flash Controller support for SAMA5 SoC
* © Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef ATMEL_PMECC_H
diff --git a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
index a37cbfe56567..a53ffb3d64b0 100644
--- a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
+++ b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
@@ -428,7 +428,7 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
}
/* Configure FLASH */
- chipsize = b47n->nand_chip.chipsize >> 20;
+ chipsize = nanddev_target_size(&b47n->nand_chip.base) >> 20;
tbits = ffs(chipsize); /* find first bit set */
if (!tbits || tbits != fls(chipsize)) {
pr_err("Invalid flash size: 0x%lX\n", chipsize);
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 482c6f093f99..ce0b8ffc7812 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -1676,11 +1676,8 @@ static int brcmstb_nand_verify_erased_page(struct mtd_info *mtd,
int page = addr >> chip->page_shift;
int ret;
- if (!buf) {
- buf = chip->data_buf;
- /* Invalidate page cache */
- chip->pagebuf = -1;
- }
+ if (!buf)
+ buf = nand_get_data_buf(chip);
sas = mtd->oobsize / chip->ecc.steps;
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 24aeafc67cd4..3102ddbd8abd 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -3,7 +3,7 @@
* NAND Flash Controller Device Driver
* Copyright © 2009-2010, Intel Corporation and its suppliers.
*
- * Copyright (c) 2017 Socionext Inc.
+ * Copyright (c) 2017-2019 Socionext Inc.
* Reworked by Masahiro Yamada <yamada.masahiro@socionext.com>
*/
@@ -40,11 +40,16 @@
#define DENALI_BANK(denali) ((denali)->active_bank << 24)
#define DENALI_INVALID_BANK -1
-#define DENALI_NR_BANKS 4
-static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd)
+static struct denali_chip *to_denali_chip(struct nand_chip *chip)
{
- return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand);
+ return container_of(chip, struct denali_chip, chip);
+}
+
+static struct denali_controller *to_denali_controller(struct nand_chip *chip)
+{
+ return container_of(chip->controller, struct denali_controller,
+ controller);
}
/*
@@ -52,12 +57,12 @@ static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd)
* type, bank, block, and page address). The slave data is the actual data to
* be transferred. This mode requires 28 bits of address region allocated.
*/
-static u32 denali_direct_read(struct denali_nand_info *denali, u32 addr)
+static u32 denali_direct_read(struct denali_controller *denali, u32 addr)
{
return ioread32(denali->host + addr);
}
-static void denali_direct_write(struct denali_nand_info *denali, u32 addr,
+static void denali_direct_write(struct denali_controller *denali, u32 addr,
u32 data)
{
iowrite32(data, denali->host + addr);
@@ -69,77 +74,62 @@ static void denali_direct_write(struct denali_nand_info *denali, u32 addr,
* control information and transferred data are latched by the registers in
* the translation module.
*/
-static u32 denali_indexed_read(struct denali_nand_info *denali, u32 addr)
+static u32 denali_indexed_read(struct denali_controller *denali, u32 addr)
{
iowrite32(addr, denali->host + DENALI_INDEXED_CTRL);
return ioread32(denali->host + DENALI_INDEXED_DATA);
}
-static void denali_indexed_write(struct denali_nand_info *denali, u32 addr,
+static void denali_indexed_write(struct denali_controller *denali, u32 addr,
u32 data)
{
iowrite32(addr, denali->host + DENALI_INDEXED_CTRL);
iowrite32(data, denali->host + DENALI_INDEXED_DATA);
}
-/*
- * Use the configuration feature register to determine the maximum number of
- * banks that the hardware supports.
- */
-static void denali_detect_max_banks(struct denali_nand_info *denali)
-{
- uint32_t features = ioread32(denali->reg + FEATURES);
-
- denali->max_banks = 1 << FIELD_GET(FEATURES__N_BANKS, features);
-
- /* the encoding changed from rev 5.0 to 5.1 */
- if (denali->revision < 0x0501)
- denali->max_banks <<= 1;
-}
-
-static void denali_enable_irq(struct denali_nand_info *denali)
+static void denali_enable_irq(struct denali_controller *denali)
{
int i;
- for (i = 0; i < DENALI_NR_BANKS; i++)
+ for (i = 0; i < denali->nbanks; i++)
iowrite32(U32_MAX, denali->reg + INTR_EN(i));
iowrite32(GLOBAL_INT_EN_FLAG, denali->reg + GLOBAL_INT_ENABLE);
}
-static void denali_disable_irq(struct denali_nand_info *denali)
+static void denali_disable_irq(struct denali_controller *denali)
{
int i;
- for (i = 0; i < DENALI_NR_BANKS; i++)
+ for (i = 0; i < denali->nbanks; i++)
iowrite32(0, denali->reg + INTR_EN(i));
iowrite32(0, denali->reg + GLOBAL_INT_ENABLE);
}
-static void denali_clear_irq(struct denali_nand_info *denali,
- int bank, uint32_t irq_status)
+static void denali_clear_irq(struct denali_controller *denali,
+ int bank, u32 irq_status)
{
/* write one to clear bits */
iowrite32(irq_status, denali->reg + INTR_STATUS(bank));
}
-static void denali_clear_irq_all(struct denali_nand_info *denali)
+static void denali_clear_irq_all(struct denali_controller *denali)
{
int i;
- for (i = 0; i < DENALI_NR_BANKS; i++)
+ for (i = 0; i < denali->nbanks; i++)
denali_clear_irq(denali, i, U32_MAX);
}
static irqreturn_t denali_isr(int irq, void *dev_id)
{
- struct denali_nand_info *denali = dev_id;
+ struct denali_controller *denali = dev_id;
irqreturn_t ret = IRQ_NONE;
- uint32_t irq_status;
+ u32 irq_status;
int i;
spin_lock(&denali->irq_lock);
- for (i = 0; i < DENALI_NR_BANKS; i++) {
+ for (i = 0; i < denali->nbanks; i++) {
irq_status = ioread32(denali->reg + INTR_STATUS(i));
if (irq_status)
ret = IRQ_HANDLED;
@@ -160,7 +150,7 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
return ret;
}
-static void denali_reset_irq(struct denali_nand_info *denali)
+static void denali_reset_irq(struct denali_controller *denali)
{
unsigned long flags;
@@ -170,11 +160,10 @@ static void denali_reset_irq(struct denali_nand_info *denali)
spin_unlock_irqrestore(&denali->irq_lock, flags);
}
-static uint32_t denali_wait_for_irq(struct denali_nand_info *denali,
- uint32_t irq_mask)
+static u32 denali_wait_for_irq(struct denali_controller *denali, u32 irq_mask)
{
unsigned long time_left, flags;
- uint32_t irq_status;
+ u32 irq_status;
spin_lock_irqsave(&denali->irq_lock, flags);
@@ -201,128 +190,259 @@ static uint32_t denali_wait_for_irq(struct denali_nand_info *denali,
return denali->irq_status;
}
-static void denali_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
+static void denali_select_target(struct nand_chip *chip, int cs)
{
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct denali_chip_sel *sel = &to_denali_chip(chip)->sels[cs];
struct mtd_info *mtd = nand_to_mtd(chip);
- struct denali_nand_info *denali = mtd_to_denali(mtd);
- u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
- int i;
- for (i = 0; i < len; i++)
- buf[i] = denali->host_read(denali, addr);
+ denali->active_bank = sel->bank;
+
+ iowrite32(1 << (chip->phys_erase_shift - chip->page_shift),
+ denali->reg + PAGES_PER_BLOCK);
+ iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0,
+ denali->reg + DEVICE_WIDTH);
+ iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE);
+ iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE);
+ iowrite32(chip->options & NAND_ROW_ADDR_3 ?
+ 0 : TWO_ROW_ADDR_CYCLES__FLAG,
+ denali->reg + TWO_ROW_ADDR_CYCLES);
+ iowrite32(FIELD_PREP(ECC_CORRECTION__ERASE_THRESHOLD, 1) |
+ FIELD_PREP(ECC_CORRECTION__VALUE, chip->ecc.strength),
+ denali->reg + ECC_CORRECTION);
+ iowrite32(chip->ecc.size, denali->reg + CFG_DATA_BLOCK_SIZE);
+ iowrite32(chip->ecc.size, denali->reg + CFG_LAST_DATA_BLOCK_SIZE);
+ iowrite32(chip->ecc.steps, denali->reg + CFG_NUM_DATA_BLOCKS);
+
+ if (chip->options & NAND_KEEP_TIMINGS)
+ return;
+
+ /* update timing registers unless NAND_KEEP_TIMINGS is set */
+ iowrite32(sel->hwhr2_and_we_2_re, denali->reg + TWHR2_AND_WE_2_RE);
+ iowrite32(sel->tcwaw_and_addr_2_data,
+ denali->reg + TCWAW_AND_ADDR_2_DATA);
+ iowrite32(sel->re_2_we, denali->reg + RE_2_WE);
+ iowrite32(sel->acc_clks, denali->reg + ACC_CLKS);
+ iowrite32(sel->rdwr_en_lo_cnt, denali->reg + RDWR_EN_LO_CNT);
+ iowrite32(sel->rdwr_en_hi_cnt, denali->reg + RDWR_EN_HI_CNT);
+ iowrite32(sel->cs_setup_cnt, denali->reg + CS_SETUP_CNT);
+ iowrite32(sel->re_2_re, denali->reg + RE_2_RE);
}
-static void denali_write_buf(struct nand_chip *chip, const uint8_t *buf,
- int len)
+static int denali_change_column(struct nand_chip *chip, unsigned int offset,
+ void *buf, unsigned int len, bool write)
{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
- u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
- int i;
-
- for (i = 0; i < len; i++)
- denali->host_write(denali, addr, buf[i]);
+ if (write)
+ return nand_change_write_column_op(chip, offset, buf, len,
+ false);
+ else
+ return nand_change_read_column_op(chip, offset, buf, len,
+ false);
}
-static void denali_read_buf16(struct nand_chip *chip, uint8_t *buf, int len)
+static int denali_payload_xfer(struct nand_chip *chip, void *buf, bool write)
{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
- u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
- uint16_t *buf16 = (uint16_t *)buf;
- int i;
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int writesize = mtd->writesize;
+ int oob_skip = denali->oob_skip_bytes;
+ int ret, i, pos, len;
+
+ for (i = 0; i < ecc->steps; i++) {
+ pos = i * (ecc->size + ecc->bytes);
+ len = ecc->size;
+
+ if (pos >= writesize) {
+ pos += oob_skip;
+ } else if (pos + len > writesize) {
+ /* This chunk overwraps the BBM area. Must be split */
+ ret = denali_change_column(chip, pos, buf,
+ writesize - pos, write);
+ if (ret)
+ return ret;
+
+ buf += writesize - pos;
+ len -= writesize - pos;
+ pos = writesize + oob_skip;
+ }
+
+ ret = denali_change_column(chip, pos, buf, len, write);
+ if (ret)
+ return ret;
- for (i = 0; i < len / 2; i++)
- buf16[i] = denali->host_read(denali, addr);
+ buf += len;
+ }
+
+ return 0;
}
-static void denali_write_buf16(struct nand_chip *chip, const uint8_t *buf,
- int len)
+static int denali_oob_xfer(struct nand_chip *chip, void *buf, bool write)
{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
- u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
- const uint16_t *buf16 = (const uint16_t *)buf;
- int i;
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int writesize = mtd->writesize;
+ int oobsize = mtd->oobsize;
+ int oob_skip = denali->oob_skip_bytes;
+ int ret, i, pos, len;
- for (i = 0; i < len / 2; i++)
- denali->host_write(denali, addr, buf16[i]);
+ /* BBM at the beginning of the OOB area */
+ ret = denali_change_column(chip, writesize, buf, oob_skip, write);
+ if (ret)
+ return ret;
+
+ buf += oob_skip;
+
+ for (i = 0; i < ecc->steps; i++) {
+ pos = ecc->size + i * (ecc->size + ecc->bytes);
+
+ if (i == ecc->steps - 1)
+ /* The last chunk includes OOB free */
+ len = writesize + oobsize - pos - oob_skip;
+ else
+ len = ecc->bytes;
+
+ if (pos >= writesize) {
+ pos += oob_skip;
+ } else if (pos + len > writesize) {
+ /* This chunk overwraps the BBM area. Must be split */
+ ret = denali_change_column(chip, pos, buf,
+ writesize - pos, write);
+ if (ret)
+ return ret;
+
+ buf += writesize - pos;
+ len -= writesize - pos;
+ pos = writesize + oob_skip;
+ }
+
+ ret = denali_change_column(chip, pos, buf, len, write);
+ if (ret)
+ return ret;
+
+ buf += len;
+ }
+
+ return 0;
}
-static uint8_t denali_read_byte(struct nand_chip *chip)
+static int denali_read_raw(struct nand_chip *chip, void *buf, void *oob_buf,
+ int page)
{
- uint8_t byte;
+ int ret;
+
+ if (!buf && !oob_buf)
+ return -EINVAL;
- denali_read_buf(chip, &byte, 1);
+ ret = nand_read_page_op(chip, page, 0, NULL, 0);
+ if (ret)
+ return ret;
- return byte;
+ if (buf) {
+ ret = denali_payload_xfer(chip, buf, false);
+ if (ret)
+ return ret;
+ }
+
+ if (oob_buf) {
+ ret = denali_oob_xfer(chip, oob_buf, false);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
-static void denali_write_byte(struct nand_chip *chip, uint8_t byte)
+static int denali_write_raw(struct nand_chip *chip, const void *buf,
+ const void *oob_buf, int page)
{
- denali_write_buf(chip, &byte, 1);
+ int ret;
+
+ if (!buf && !oob_buf)
+ return -EINVAL;
+
+ ret = nand_prog_page_begin_op(chip, page, 0, NULL, 0);
+ if (ret)
+ return ret;
+
+ if (buf) {
+ ret = denali_payload_xfer(chip, (void *)buf, true);
+ if (ret)
+ return ret;
+ }
+
+ if (oob_buf) {
+ ret = denali_oob_xfer(chip, (void *)oob_buf, true);
+ if (ret)
+ return ret;
+ }
+
+ return nand_prog_page_end_op(chip);
}
-static void denali_cmd_ctrl(struct nand_chip *chip, int dat, unsigned int ctrl)
+static int denali_read_page_raw(struct nand_chip *chip, u8 *buf,
+ int oob_required, int page)
{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
- uint32_t type;
+ return denali_read_raw(chip, buf, oob_required ? chip->oob_poi : NULL,
+ page);
+}
- if (ctrl & NAND_CLE)
- type = DENALI_MAP11_CMD;
- else if (ctrl & NAND_ALE)
- type = DENALI_MAP11_ADDR;
- else
- return;
+static int denali_write_page_raw(struct nand_chip *chip, const u8 *buf,
+ int oob_required, int page)
+{
+ return denali_write_raw(chip, buf, oob_required ? chip->oob_poi : NULL,
+ page);
+}
- /*
- * Some commands are followed by chip->legacy.waitfunc.
- * irq_status must be cleared here to catch the R/B# interrupt later.
- */
- if (ctrl & NAND_CTRL_CHANGE)
- denali_reset_irq(denali);
+static int denali_read_oob(struct nand_chip *chip, int page)
+{
+ return denali_read_raw(chip, NULL, chip->oob_poi, page);
+}
- denali->host_write(denali, DENALI_BANK(denali) | type, dat);
+static int denali_write_oob(struct nand_chip *chip, int page)
+{
+ return denali_write_raw(chip, NULL, chip->oob_poi, page);
}
-static int denali_check_erased_page(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf,
+static int denali_check_erased_page(struct nand_chip *chip, u8 *buf,
unsigned long uncor_ecc_flags,
unsigned int max_bitflips)
{
- struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint8_t *ecc_code = chip->oob_poi + denali->oob_skip_bytes;
- int ecc_steps = chip->ecc.steps;
- int ecc_size = chip->ecc.size;
- int ecc_bytes = chip->ecc.bytes;
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_ecc_stats *ecc_stats = &nand_to_mtd(chip)->ecc_stats;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ u8 *ecc_code = chip->oob_poi + denali->oob_skip_bytes;
int i, stat;
- for (i = 0; i < ecc_steps; i++) {
+ for (i = 0; i < ecc->steps; i++) {
if (!(uncor_ecc_flags & BIT(i)))
continue;
- stat = nand_check_erased_ecc_chunk(buf, ecc_size,
- ecc_code, ecc_bytes,
- NULL, 0,
- chip->ecc.strength);
+ stat = nand_check_erased_ecc_chunk(buf, ecc->size, ecc_code,
+ ecc->bytes, NULL, 0,
+ ecc->strength);
if (stat < 0) {
- mtd->ecc_stats.failed++;
+ ecc_stats->failed++;
} else {
- mtd->ecc_stats.corrected += stat;
+ ecc_stats->corrected += stat;
max_bitflips = max_t(unsigned int, max_bitflips, stat);
}
- buf += ecc_size;
- ecc_code += ecc_bytes;
+ buf += ecc->size;
+ ecc_code += ecc->bytes;
}
return max_bitflips;
}
-static int denali_hw_ecc_fixup(struct mtd_info *mtd,
- struct denali_nand_info *denali,
+static int denali_hw_ecc_fixup(struct nand_chip *chip,
unsigned long *uncor_ecc_flags)
{
- struct nand_chip *chip = mtd_to_nand(mtd);
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_ecc_stats *ecc_stats = &nand_to_mtd(chip)->ecc_stats;
int bank = denali->active_bank;
- uint32_t ecc_cor;
+ u32 ecc_cor;
unsigned int max_bitflips;
ecc_cor = ioread32(denali->reg + ECC_COR_INFO(bank));
@@ -346,23 +466,24 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd,
* Unfortunately, we can not know the total number of corrected bits in
* the page. Increase the stats by max_bitflips. (compromised solution)
*/
- mtd->ecc_stats.corrected += max_bitflips;
+ ecc_stats->corrected += max_bitflips;
return max_bitflips;
}
-static int denali_sw_ecc_fixup(struct mtd_info *mtd,
- struct denali_nand_info *denali,
- unsigned long *uncor_ecc_flags, uint8_t *buf)
+static int denali_sw_ecc_fixup(struct nand_chip *chip,
+ unsigned long *uncor_ecc_flags, u8 *buf)
{
- unsigned int ecc_size = denali->nand.ecc.size;
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct mtd_ecc_stats *ecc_stats = &nand_to_mtd(chip)->ecc_stats;
+ unsigned int ecc_size = chip->ecc.size;
unsigned int bitflips = 0;
unsigned int max_bitflips = 0;
- uint32_t err_addr, err_cor_info;
+ u32 err_addr, err_cor_info;
unsigned int err_byte, err_sector, err_device;
- uint8_t err_cor_value;
+ u8 err_cor_value;
unsigned int prev_sector = 0;
- uint32_t irq_status;
+ u32 irq_status;
denali_reset_irq(denali);
@@ -404,7 +525,7 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
/* correct the ECC error */
flips_in_byte = hweight8(buf[offset] ^ err_cor_value);
buf[offset] ^= err_cor_value;
- mtd->ecc_stats.corrected += flips_in_byte;
+ ecc_stats->corrected += flips_in_byte;
bitflips += flips_in_byte;
max_bitflips = max(max_bitflips, bitflips);
@@ -424,10 +545,10 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
return max_bitflips;
}
-static void denali_setup_dma64(struct denali_nand_info *denali,
- dma_addr_t dma_addr, int page, int write)
+static void denali_setup_dma64(struct denali_controller *denali,
+ dma_addr_t dma_addr, int page, bool write)
{
- uint32_t mode;
+ u32 mode;
const int page_count = 1;
mode = DENALI_MAP10 | DENALI_BANK(denali) | page;
@@ -439,7 +560,8 @@ static void denali_setup_dma64(struct denali_nand_info *denali,
* burst len = 64 bytes, the number of pages
*/
denali->host_write(denali, mode,
- 0x01002000 | (64 << 16) | (write << 8) | page_count);
+ 0x01002000 | (64 << 16) |
+ (write ? BIT(8) : 0) | page_count);
/* 2. set memory low address */
denali->host_write(denali, mode, lower_32_bits(dma_addr));
@@ -448,10 +570,10 @@ static void denali_setup_dma64(struct denali_nand_info *denali,
denali->host_write(denali, mode, upper_32_bits(dma_addr));
}
-static void denali_setup_dma32(struct denali_nand_info *denali,
- dma_addr_t dma_addr, int page, int write)
+static void denali_setup_dma32(struct denali_controller *denali,
+ dma_addr_t dma_addr, int page, bool write)
{
- uint32_t mode;
+ u32 mode;
const int page_count = 1;
mode = DENALI_MAP10 | DENALI_BANK(denali);
@@ -460,7 +582,7 @@ static void denali_setup_dma32(struct denali_nand_info *denali,
/* 1. setup transfer type and # of pages */
denali->host_write(denali, mode | page,
- 0x2000 | (write << 8) | page_count);
+ 0x2000 | (write ? BIT(8) : 0) | page_count);
/* 2. set memory high address bits 23:8 */
denali->host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200);
@@ -472,12 +594,11 @@ static void denali_setup_dma32(struct denali_nand_info *denali,
denali->host_write(denali, mode | 0x14000, 0x2400);
}
-static int denali_pio_read(struct denali_nand_info *denali, void *buf,
+static int denali_pio_read(struct denali_controller *denali, u32 *buf,
size_t size, int page)
{
u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
- uint32_t *buf32 = (uint32_t *)buf;
- uint32_t irq_status, ecc_err_mask;
+ u32 irq_status, ecc_err_mask;
int i;
if (denali->caps & DENALI_CAP_HW_ECC_FIXUP)
@@ -488,7 +609,7 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf,
denali_reset_irq(denali);
for (i = 0; i < size / 4; i++)
- *buf32++ = denali->host_read(denali, addr);
+ buf[i] = denali->host_read(denali, addr);
irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC);
if (!(irq_status & INTR__PAGE_XFER_INC))
@@ -500,29 +621,29 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf,
return irq_status & ecc_err_mask ? -EBADMSG : 0;
}
-static int denali_pio_write(struct denali_nand_info *denali,
- const void *buf, size_t size, int page)
+static int denali_pio_write(struct denali_controller *denali, const u32 *buf,
+ size_t size, int page)
{
u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
- const uint32_t *buf32 = (uint32_t *)buf;
- uint32_t irq_status;
+ u32 irq_status;
int i;
denali_reset_irq(denali);
for (i = 0; i < size / 4; i++)
- denali->host_write(denali, addr, *buf32++);
+ denali->host_write(denali, addr, buf[i]);
irq_status = denali_wait_for_irq(denali,
- INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL);
+ INTR__PROGRAM_COMP |
+ INTR__PROGRAM_FAIL);
if (!(irq_status & INTR__PROGRAM_COMP))
return -EIO;
return 0;
}
-static int denali_pio_xfer(struct denali_nand_info *denali, void *buf,
- size_t size, int page, int write)
+static int denali_pio_xfer(struct denali_controller *denali, void *buf,
+ size_t size, int page, bool write)
{
if (write)
return denali_pio_write(denali, buf, size, page);
@@ -530,11 +651,11 @@ static int denali_pio_xfer(struct denali_nand_info *denali, void *buf,
return denali_pio_read(denali, buf, size, page);
}
-static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
- size_t size, int page, int write)
+static int denali_dma_xfer(struct denali_controller *denali, void *buf,
+ size_t size, int page, bool write)
{
dma_addr_t dma_addr;
- uint32_t irq_mask, irq_status, ecc_err_mask;
+ u32 irq_mask, irq_status, ecc_err_mask;
enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
int ret = 0;
@@ -587,12 +708,12 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
return ret;
}
-static int denali_data_xfer(struct denali_nand_info *denali, void *buf,
- size_t size, int page, int raw, int write)
+static int denali_page_xfer(struct nand_chip *chip, void *buf, size_t size,
+ int page, bool write)
{
- iowrite32(raw ? 0 : ECC_ENABLE__FLAG, denali->reg + ECC_ENABLE);
- iowrite32(raw ? TRANSFER_SPARE_REG__FLAG : 0,
- denali->reg + TRANSFER_SPARE_REG);
+ struct denali_controller *denali = to_denali_controller(chip);
+
+ denali_select_target(chip, chip->cur_cs);
if (denali->dma_avail)
return denali_dma_xfer(denali, buf, size, page, write);
@@ -600,180 +721,23 @@ static int denali_data_xfer(struct denali_nand_info *denali, void *buf,
return denali_pio_xfer(denali, buf, size, page, write);
}
-static void denali_oob_xfer(struct mtd_info *mtd, struct nand_chip *chip,
- int page, int write)
-{
- struct denali_nand_info *denali = mtd_to_denali(mtd);
- int writesize = mtd->writesize;
- int oobsize = mtd->oobsize;
- uint8_t *bufpoi = chip->oob_poi;
- int ecc_steps = chip->ecc.steps;
- int ecc_size = chip->ecc.size;
- int ecc_bytes = chip->ecc.bytes;
- int oob_skip = denali->oob_skip_bytes;
- size_t size = writesize + oobsize;
- int i, pos, len;
-
- /* BBM at the beginning of the OOB area */
- if (write)
- nand_prog_page_begin_op(chip, page, writesize, bufpoi,
- oob_skip);
- else
- nand_read_page_op(chip, page, writesize, bufpoi, oob_skip);
- bufpoi += oob_skip;
-
- /* OOB ECC */
- for (i = 0; i < ecc_steps; i++) {
- pos = ecc_size + i * (ecc_size + ecc_bytes);
- len = ecc_bytes;
-
- if (pos >= writesize)
- pos += oob_skip;
- else if (pos + len > writesize)
- len = writesize - pos;
-
- if (write)
- nand_change_write_column_op(chip, pos, bufpoi, len,
- false);
- else
- nand_change_read_column_op(chip, pos, bufpoi, len,
- false);
- bufpoi += len;
- if (len < ecc_bytes) {
- len = ecc_bytes - len;
- if (write)
- nand_change_write_column_op(chip, writesize +
- oob_skip, bufpoi,
- len, false);
- else
- nand_change_read_column_op(chip, writesize +
- oob_skip, bufpoi,
- len, false);
- bufpoi += len;
- }
- }
-
- /* OOB free */
- len = oobsize - (bufpoi - chip->oob_poi);
- if (write)
- nand_change_write_column_op(chip, size - len, bufpoi, len,
- false);
- else
- nand_change_read_column_op(chip, size - len, bufpoi, len,
- false);
-}
-
-static int denali_read_page_raw(struct nand_chip *chip, uint8_t *buf,
- int oob_required, int page)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct denali_nand_info *denali = mtd_to_denali(mtd);
- int writesize = mtd->writesize;
- int oobsize = mtd->oobsize;
- int ecc_steps = chip->ecc.steps;
- int ecc_size = chip->ecc.size;
- int ecc_bytes = chip->ecc.bytes;
- void *tmp_buf = denali->buf;
- int oob_skip = denali->oob_skip_bytes;
- size_t size = writesize + oobsize;
- int ret, i, pos, len;
-
- ret = denali_data_xfer(denali, tmp_buf, size, page, 1, 0);
- if (ret)
- return ret;
-
- /* Arrange the buffer for syndrome payload/ecc layout */
- if (buf) {
- for (i = 0; i < ecc_steps; i++) {
- pos = i * (ecc_size + ecc_bytes);
- len = ecc_size;
-
- if (pos >= writesize)
- pos += oob_skip;
- else if (pos + len > writesize)
- len = writesize - pos;
-
- memcpy(buf, tmp_buf + pos, len);
- buf += len;
- if (len < ecc_size) {
- len = ecc_size - len;
- memcpy(buf, tmp_buf + writesize + oob_skip,
- len);
- buf += len;
- }
- }
- }
-
- if (oob_required) {
- uint8_t *oob = chip->oob_poi;
-
- /* BBM at the beginning of the OOB area */
- memcpy(oob, tmp_buf + writesize, oob_skip);
- oob += oob_skip;
-
- /* OOB ECC */
- for (i = 0; i < ecc_steps; i++) {
- pos = ecc_size + i * (ecc_size + ecc_bytes);
- len = ecc_bytes;
-
- if (pos >= writesize)
- pos += oob_skip;
- else if (pos + len > writesize)
- len = writesize - pos;
-
- memcpy(oob, tmp_buf + pos, len);
- oob += len;
- if (len < ecc_bytes) {
- len = ecc_bytes - len;
- memcpy(oob, tmp_buf + writesize + oob_skip,
- len);
- oob += len;
- }
- }
-
- /* OOB free */
- len = oobsize - (oob - chip->oob_poi);
- memcpy(oob, tmp_buf + size - len, len);
- }
-
- return 0;
-}
-
-static int denali_read_oob(struct nand_chip *chip, int page)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
-
- denali_oob_xfer(mtd, chip, page, 0);
-
- return 0;
-}
-
-static int denali_write_oob(struct nand_chip *chip, int page)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
-
- denali_oob_xfer(mtd, chip, page, 1);
-
- return nand_prog_page_end_op(chip);
-}
-
-static int denali_read_page(struct nand_chip *chip, uint8_t *buf,
+static int denali_read_page(struct nand_chip *chip, u8 *buf,
int oob_required, int page)
{
+ struct denali_controller *denali = to_denali_controller(chip);
struct mtd_info *mtd = nand_to_mtd(chip);
- struct denali_nand_info *denali = mtd_to_denali(mtd);
unsigned long uncor_ecc_flags = 0;
int stat = 0;
int ret;
- ret = denali_data_xfer(denali, buf, mtd->writesize, page, 0, 0);
+ ret = denali_page_xfer(chip, buf, mtd->writesize, page, false);
if (ret && ret != -EBADMSG)
return ret;
if (denali->caps & DENALI_CAP_HW_ECC_FIXUP)
- stat = denali_hw_ecc_fixup(mtd, denali, &uncor_ecc_flags);
+ stat = denali_hw_ecc_fixup(chip, &uncor_ecc_flags);
else if (ret == -EBADMSG)
- stat = denali_sw_ecc_fixup(mtd, denali, &uncor_ecc_flags, buf);
+ stat = denali_sw_ecc_fixup(chip, &uncor_ecc_flags, buf);
if (stat < 0)
return stat;
@@ -783,130 +747,32 @@ static int denali_read_page(struct nand_chip *chip, uint8_t *buf,
if (ret)
return ret;
- stat = denali_check_erased_page(mtd, chip, buf,
+ stat = denali_check_erased_page(chip, buf,
uncor_ecc_flags, stat);
}
return stat;
}
-static int denali_write_page_raw(struct nand_chip *chip, const uint8_t *buf,
- int oob_required, int page)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct denali_nand_info *denali = mtd_to_denali(mtd);
- int writesize = mtd->writesize;
- int oobsize = mtd->oobsize;
- int ecc_steps = chip->ecc.steps;
- int ecc_size = chip->ecc.size;
- int ecc_bytes = chip->ecc.bytes;
- void *tmp_buf = denali->buf;
- int oob_skip = denali->oob_skip_bytes;
- size_t size = writesize + oobsize;
- int i, pos, len;
-
- /*
- * Fill the buffer with 0xff first except the full page transfer.
- * This simplifies the logic.
- */
- if (!buf || !oob_required)
- memset(tmp_buf, 0xff, size);
-
- /* Arrange the buffer for syndrome payload/ecc layout */
- if (buf) {
- for (i = 0; i < ecc_steps; i++) {
- pos = i * (ecc_size + ecc_bytes);
- len = ecc_size;
-
- if (pos >= writesize)
- pos += oob_skip;
- else if (pos + len > writesize)
- len = writesize - pos;
-
- memcpy(tmp_buf + pos, buf, len);
- buf += len;
- if (len < ecc_size) {
- len = ecc_size - len;
- memcpy(tmp_buf + writesize + oob_skip, buf,
- len);
- buf += len;
- }
- }
- }
-
- if (oob_required) {
- const uint8_t *oob = chip->oob_poi;
-
- /* BBM at the beginning of the OOB area */
- memcpy(tmp_buf + writesize, oob, oob_skip);
- oob += oob_skip;
-
- /* OOB ECC */
- for (i = 0; i < ecc_steps; i++) {
- pos = ecc_size + i * (ecc_size + ecc_bytes);
- len = ecc_bytes;
-
- if (pos >= writesize)
- pos += oob_skip;
- else if (pos + len > writesize)
- len = writesize - pos;
-
- memcpy(tmp_buf + pos, oob, len);
- oob += len;
- if (len < ecc_bytes) {
- len = ecc_bytes - len;
- memcpy(tmp_buf + writesize + oob_skip, oob,
- len);
- oob += len;
- }
- }
-
- /* OOB free */
- len = oobsize - (oob - chip->oob_poi);
- memcpy(tmp_buf + size - len, oob, len);
- }
-
- return denali_data_xfer(denali, tmp_buf, size, page, 1, 1);
-}
-
-static int denali_write_page(struct nand_chip *chip, const uint8_t *buf,
+static int denali_write_page(struct nand_chip *chip, const u8 *buf,
int oob_required, int page)
{
struct mtd_info *mtd = nand_to_mtd(chip);
- struct denali_nand_info *denali = mtd_to_denali(mtd);
- return denali_data_xfer(denali, (void *)buf, mtd->writesize,
- page, 0, 1);
-}
-
-static void denali_select_chip(struct nand_chip *chip, int cs)
-{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
-
- denali->active_bank = cs;
-}
-
-static int denali_waitfunc(struct nand_chip *chip)
-{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
- uint32_t irq_status;
-
- /* R/B# pin transitioned from low to high? */
- irq_status = denali_wait_for_irq(denali, INTR__INT_ACT);
-
- return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL;
+ return denali_page_xfer(chip, (void *)buf, mtd->writesize, page, true);
}
static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
const struct nand_data_interface *conf)
{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
+ struct denali_controller *denali = to_denali_controller(chip);
+ struct denali_chip_sel *sel;
const struct nand_sdr_timings *timings;
unsigned long t_x, mult_x;
int acc_clks, re_2_we, re_2_re, we_2_re, addr_2_data;
int rdwr_en_lo, rdwr_en_hi, rdwr_en_lo_hi, cs_setup;
int addr_2_data_mask;
- uint32_t tmp;
+ u32 tmp;
timings = nand_get_sdr_timings(conf);
if (IS_ERR(timings))
@@ -929,6 +795,8 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
return 0;
+ sel = &to_denali_chip(chip)->sels[chipnr];
+
/* tREA -> ACC_CLKS */
acc_clks = DIV_ROUND_UP(timings->tREA_max, t_x);
acc_clks = min_t(int, acc_clks, ACC_CLKS__VALUE);
@@ -936,7 +804,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
tmp = ioread32(denali->reg + ACC_CLKS);
tmp &= ~ACC_CLKS__VALUE;
tmp |= FIELD_PREP(ACC_CLKS__VALUE, acc_clks);
- iowrite32(tmp, denali->reg + ACC_CLKS);
+ sel->acc_clks = tmp;
/* tRWH -> RE_2_WE */
re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_x);
@@ -945,7 +813,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
tmp = ioread32(denali->reg + RE_2_WE);
tmp &= ~RE_2_WE__VALUE;
tmp |= FIELD_PREP(RE_2_WE__VALUE, re_2_we);
- iowrite32(tmp, denali->reg + RE_2_WE);
+ sel->re_2_we = tmp;
/* tRHZ -> RE_2_RE */
re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_x);
@@ -954,7 +822,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
tmp = ioread32(denali->reg + RE_2_RE);
tmp &= ~RE_2_RE__VALUE;
tmp |= FIELD_PREP(RE_2_RE__VALUE, re_2_re);
- iowrite32(tmp, denali->reg + RE_2_RE);
+ sel->re_2_re = tmp;
/*
* tCCS, tWHR -> WE_2_RE
@@ -968,7 +836,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE);
tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE;
tmp |= FIELD_PREP(TWHR2_AND_WE_2_RE__WE_2_RE, we_2_re);
- iowrite32(tmp, denali->reg + TWHR2_AND_WE_2_RE);
+ sel->hwhr2_and_we_2_re = tmp;
/* tADL -> ADDR_2_DATA */
@@ -983,7 +851,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA);
tmp &= ~TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA;
tmp |= FIELD_PREP(TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA, addr_2_data);
- iowrite32(tmp, denali->reg + TCWAW_AND_ADDR_2_DATA);
+ sel->tcwaw_and_addr_2_data = tmp;
/* tREH, tWH -> RDWR_EN_HI_CNT */
rdwr_en_hi = DIV_ROUND_UP(max(timings->tREH_min, timings->tWH_min),
@@ -993,7 +861,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
tmp = ioread32(denali->reg + RDWR_EN_HI_CNT);
tmp &= ~RDWR_EN_HI_CNT__VALUE;
tmp |= FIELD_PREP(RDWR_EN_HI_CNT__VALUE, rdwr_en_hi);
- iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT);
+ sel->rdwr_en_hi_cnt = tmp;
/* tRP, tWP -> RDWR_EN_LO_CNT */
rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min), t_x);
@@ -1006,7 +874,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
tmp = ioread32(denali->reg + RDWR_EN_LO_CNT);
tmp &= ~RDWR_EN_LO_CNT__VALUE;
tmp |= FIELD_PREP(RDWR_EN_LO_CNT__VALUE, rdwr_en_lo);
- iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT);
+ sel->rdwr_en_lo_cnt = tmp;
/* tCS, tCEA -> CS_SETUP_CNT */
cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_x) - rdwr_en_lo,
@@ -1017,39 +885,11 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
tmp = ioread32(denali->reg + CS_SETUP_CNT);
tmp &= ~CS_SETUP_CNT__VALUE;
tmp |= FIELD_PREP(CS_SETUP_CNT__VALUE, cs_setup);
- iowrite32(tmp, denali->reg + CS_SETUP_CNT);
+ sel->cs_setup_cnt = tmp;
return 0;
}
-static void denali_hw_init(struct denali_nand_info *denali)
-{
- /*
- * The REVISION register may not be reliable. Platforms are allowed to
- * override it.
- */
- if (!denali->revision)
- denali->revision = swab16(ioread32(denali->reg + REVISION));
-
- /*
- * Set how many bytes should be skipped before writing data in OOB.
- * If a non-zero value has already been set (by firmware or something),
- * just use it. Otherwise, set the driver default.
- */
- denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES);
- if (!denali->oob_skip_bytes) {
- denali->oob_skip_bytes = DENALI_DEFAULT_OOB_SKIP_BYTES;
- iowrite32(denali->oob_skip_bytes,
- denali->reg + SPARE_AREA_SKIP_BYTES);
- }
-
- denali_detect_max_banks(denali);
- iowrite32(0x0F, denali->reg + RB_PIN_ENABLED);
- iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);
-
- iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER);
-}
-
int denali_calc_ecc_bytes(int step_size, int strength)
{
/* BCH code. Denali requires ecc.bytes to be multiple of 2 */
@@ -1060,10 +900,10 @@ EXPORT_SYMBOL(denali_calc_ecc_bytes);
static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
- struct denali_nand_info *denali = mtd_to_denali(mtd);
struct nand_chip *chip = mtd_to_nand(mtd);
+ struct denali_controller *denali = to_denali_controller(chip);
- if (section)
+ if (section > 0)
return -ERANGE;
oobregion->offset = denali->oob_skip_bytes;
@@ -1075,10 +915,10 @@ static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
static int denali_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
- struct denali_nand_info *denali = mtd_to_denali(mtd);
struct nand_chip *chip = mtd_to_nand(mtd);
+ struct denali_controller *denali = to_denali_controller(chip);
- if (section)
+ if (section > 0)
return -ERANGE;
oobregion->offset = chip->ecc.total + denali->oob_skip_bytes;
@@ -1092,10 +932,13 @@ static const struct mtd_ooblayout_ops denali_ooblayout_ops = {
.free = denali_ooblayout_free,
};
-static int denali_multidev_fixup(struct denali_nand_info *denali)
+static int denali_multidev_fixup(struct nand_chip *chip)
{
- struct nand_chip *chip = &denali->nand;
+ struct denali_controller *denali = to_denali_controller(chip);
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
+
+ memorg = nanddev_get_memorg(&chip->base);
/*
* Support for multi device:
@@ -1125,11 +968,12 @@ static int denali_multidev_fixup(struct denali_nand_info *denali)
}
/* 2 chips in parallel */
+ memorg->pagesize <<= 1;
+ memorg->oobsize <<= 1;
mtd->size <<= 1;
mtd->erasesize <<= 1;
mtd->writesize <<= 1;
mtd->oobsize <<= 1;
- chip->chipsize <<= 1;
chip->page_shift += 1;
chip->phys_erase_shift += 1;
chip->bbt_erase_shift += 1;
@@ -1145,38 +989,10 @@ static int denali_multidev_fixup(struct denali_nand_info *denali)
static int denali_attach_chip(struct nand_chip *chip)
{
+ struct denali_controller *denali = to_denali_controller(chip);
struct mtd_info *mtd = nand_to_mtd(chip);
- struct denali_nand_info *denali = mtd_to_denali(mtd);
int ret;
- if (ioread32(denali->reg + FEATURES) & FEATURES__DMA)
- denali->dma_avail = 1;
-
- if (denali->dma_avail) {
- int dma_bit = denali->caps & DENALI_CAP_DMA_64BIT ? 64 : 32;
-
- ret = dma_set_mask(denali->dev, DMA_BIT_MASK(dma_bit));
- if (ret) {
- dev_info(denali->dev,
- "Failed to set DMA mask. Disabling DMA.\n");
- denali->dma_avail = 0;
- }
- }
-
- if (denali->dma_avail) {
- chip->options |= NAND_USE_BOUNCE_BUFFER;
- chip->buf_align = 16;
- if (denali->caps & DENALI_CAP_DMA_64BIT)
- denali->setup_dma = denali_setup_dma64;
- else
- denali->setup_dma = denali_setup_dma32;
- }
-
- chip->bbt_options |= NAND_BBT_USE_FLASH;
- chip->bbt_options |= NAND_BBT_NO_OOB;
- chip->ecc.mode = NAND_ECC_HW_SYNDROME;
- chip->options |= NAND_NO_SUBPAGE_WRITE;
-
ret = nand_ecc_choose_conf(chip, denali->ecc_caps,
mtd->oobsize - denali->oob_skip_bytes);
if (ret) {
@@ -1188,123 +1004,230 @@ static int denali_attach_chip(struct nand_chip *chip)
"chosen ECC settings: step=%d, strength=%d, bytes=%d\n",
chip->ecc.size, chip->ecc.strength, chip->ecc.bytes);
- iowrite32(FIELD_PREP(ECC_CORRECTION__ERASE_THRESHOLD, 1) |
- FIELD_PREP(ECC_CORRECTION__VALUE, chip->ecc.strength),
- denali->reg + ECC_CORRECTION);
- iowrite32(mtd->erasesize / mtd->writesize,
- denali->reg + PAGES_PER_BLOCK);
- iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0,
- denali->reg + DEVICE_WIDTH);
- iowrite32(chip->options & NAND_ROW_ADDR_3 ? 0 : TWO_ROW_ADDR_CYCLES__FLAG,
- denali->reg + TWO_ROW_ADDR_CYCLES);
- iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE);
- iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE);
+ ret = denali_multidev_fixup(chip);
+ if (ret)
+ return ret;
- iowrite32(chip->ecc.size, denali->reg + CFG_DATA_BLOCK_SIZE);
- iowrite32(chip->ecc.size, denali->reg + CFG_LAST_DATA_BLOCK_SIZE);
- /* chip->ecc.steps is set by nand_scan_tail(); not available here */
- iowrite32(mtd->writesize / chip->ecc.size,
- denali->reg + CFG_NUM_DATA_BLOCKS);
+ return 0;
+}
- mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
+static void denali_exec_in8(struct denali_controller *denali, u32 type,
+ u8 *buf, unsigned int len)
+{
+ int i;
- if (chip->options & NAND_BUSWIDTH_16) {
- chip->legacy.read_buf = denali_read_buf16;
- chip->legacy.write_buf = denali_write_buf16;
- } else {
- chip->legacy.read_buf = denali_read_buf;
- chip->legacy.write_buf = denali_write_buf;
+ for (i = 0; i < len; i++)
+ buf[i] = denali->host_read(denali, type | DENALI_BANK(denali));
+}
+
+static void denali_exec_in16(struct denali_controller *denali, u32 type,
+ u8 *buf, unsigned int len)
+{
+ u32 data;
+ int i;
+
+ for (i = 0; i < len; i += 2) {
+ data = denali->host_read(denali, type | DENALI_BANK(denali));
+ /* bit 31:24 and 15:8 are used for DDR */
+ buf[i] = data;
+ buf[i + 1] = data >> 16;
}
- chip->ecc.read_page = denali_read_page;
- chip->ecc.read_page_raw = denali_read_page_raw;
- chip->ecc.write_page = denali_write_page;
- chip->ecc.write_page_raw = denali_write_page_raw;
- chip->ecc.read_oob = denali_read_oob;
- chip->ecc.write_oob = denali_write_oob;
+}
- ret = denali_multidev_fixup(denali);
- if (ret)
- return ret;
+static void denali_exec_in(struct denali_controller *denali, u32 type,
+ u8 *buf, unsigned int len, bool width16)
+{
+ if (width16)
+ denali_exec_in16(denali, type, buf, len);
+ else
+ denali_exec_in8(denali, type, buf, len);
+}
- /*
- * This buffer is DMA-mapped by denali_{read,write}_page_raw. Do not
- * use devm_kmalloc() because the memory allocated by devm_ does not
- * guarantee DMA-safe alignment.
- */
- denali->buf = kmalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
- if (!denali->buf)
- return -ENOMEM;
+static void denali_exec_out8(struct denali_controller *denali, u32 type,
+ const u8 *buf, unsigned int len)
+{
+ int i;
- return 0;
+ for (i = 0; i < len; i++)
+ denali->host_write(denali, type | DENALI_BANK(denali), buf[i]);
}
-static void denali_detach_chip(struct nand_chip *chip)
+static void denali_exec_out16(struct denali_controller *denali, u32 type,
+ const u8 *buf, unsigned int len)
{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct denali_nand_info *denali = mtd_to_denali(mtd);
+ int i;
+
+ for (i = 0; i < len; i += 2)
+ denali->host_write(denali, type | DENALI_BANK(denali),
+ buf[i + 1] << 16 | buf[i]);
+}
- kfree(denali->buf);
+static void denali_exec_out(struct denali_controller *denali, u32 type,
+ const u8 *buf, unsigned int len, bool width16)
+{
+ if (width16)
+ denali_exec_out16(denali, type, buf, len);
+ else
+ denali_exec_out8(denali, type, buf, len);
+}
+
+static int denali_exec_waitrdy(struct denali_controller *denali)
+{
+ u32 irq_stat;
+
+ /* R/B# pin transitioned from low to high? */
+ irq_stat = denali_wait_for_irq(denali, INTR__INT_ACT);
+
+ /* Just in case nand_operation has multiple NAND_OP_WAITRDY_INSTR. */
+ denali_reset_irq(denali);
+
+ return irq_stat & INTR__INT_ACT ? 0 : -EIO;
+}
+
+static int denali_exec_instr(struct nand_chip *chip,
+ const struct nand_op_instr *instr)
+{
+ struct denali_controller *denali = to_denali_controller(chip);
+
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ denali_exec_out8(denali, DENALI_MAP11_CMD,
+ &instr->ctx.cmd.opcode, 1);
+ return 0;
+ case NAND_OP_ADDR_INSTR:
+ denali_exec_out8(denali, DENALI_MAP11_ADDR,
+ instr->ctx.addr.addrs,
+ instr->ctx.addr.naddrs);
+ return 0;
+ case NAND_OP_DATA_IN_INSTR:
+ denali_exec_in(denali, DENALI_MAP11_DATA,
+ instr->ctx.data.buf.in,
+ instr->ctx.data.len,
+ !instr->ctx.data.force_8bit &&
+ chip->options & NAND_BUSWIDTH_16);
+ return 0;
+ case NAND_OP_DATA_OUT_INSTR:
+ denali_exec_out(denali, DENALI_MAP11_DATA,
+ instr->ctx.data.buf.out,
+ instr->ctx.data.len,
+ !instr->ctx.data.force_8bit &&
+ chip->options & NAND_BUSWIDTH_16);
+ return 0;
+ case NAND_OP_WAITRDY_INSTR:
+ return denali_exec_waitrdy(denali);
+ default:
+ WARN_ONCE(1, "unsupported NAND instruction type: %d\n",
+ instr->type);
+
+ return -EINVAL;
+ }
+}
+
+static int denali_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op, bool check_only)
+{
+ int i, ret;
+
+ if (check_only)
+ return 0;
+
+ denali_select_target(chip, op->cs);
+
+ /*
+ * Some commands contain NAND_OP_WAITRDY_INSTR.
+ * irq must be cleared here to catch the R/B# interrupt there.
+ */
+ denali_reset_irq(to_denali_controller(chip));
+
+ for (i = 0; i < op->ninstrs; i++) {
+ ret = denali_exec_instr(chip, &op->instrs[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static const struct nand_controller_ops denali_controller_ops = {
.attach_chip = denali_attach_chip,
- .detach_chip = denali_detach_chip,
+ .exec_op = denali_exec_op,
.setup_data_interface = denali_setup_data_interface,
};
-int denali_init(struct denali_nand_info *denali)
+int denali_chip_init(struct denali_controller *denali,
+ struct denali_chip *dchip)
{
- struct nand_chip *chip = &denali->nand;
+ struct nand_chip *chip = &dchip->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
- u32 features = ioread32(denali->reg + FEATURES);
- int ret;
+ struct denali_chip *dchip2;
+ int i, j, ret;
- mtd->dev.parent = denali->dev;
- denali_hw_init(denali);
+ chip->controller = &denali->controller;
- init_completion(&denali->complete);
- spin_lock_init(&denali->irq_lock);
+ /* sanity checks for bank numbers */
+ for (i = 0; i < dchip->nsels; i++) {
+ unsigned int bank = dchip->sels[i].bank;
- denali_clear_irq_all(denali);
+ if (bank >= denali->nbanks) {
+ dev_err(denali->dev, "unsupported bank %d\n", bank);
+ return -EINVAL;
+ }
- ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
- IRQF_SHARED, DENALI_NAND_NAME, denali);
- if (ret) {
- dev_err(denali->dev, "Unable to request IRQ\n");
- return ret;
- }
+ for (j = 0; j < i; j++) {
+ if (bank == dchip->sels[j].bank) {
+ dev_err(denali->dev,
+ "bank %d is assigned twice in the same chip\n",
+ bank);
+ return -EINVAL;
+ }
+ }
- denali_enable_irq(denali);
+ list_for_each_entry(dchip2, &denali->chips, node) {
+ for (j = 0; j < dchip2->nsels; j++) {
+ if (bank == dchip2->sels[j].bank) {
+ dev_err(denali->dev,
+ "bank %d is already used\n",
+ bank);
+ return -EINVAL;
+ }
+ }
+ }
+ }
- denali->active_bank = DENALI_INVALID_BANK;
+ mtd->dev.parent = denali->dev;
- nand_set_flash_node(chip, denali->dev->of_node);
- /* Fallback to the default name if DT did not give "label" property */
- if (!mtd->name)
+ /*
+ * Fallback to the default name if DT did not give "label" property.
+ * Use "label" property if multiple chips are connected.
+ */
+ if (!mtd->name && list_empty(&denali->chips))
mtd->name = "denali-nand";
- chip->legacy.select_chip = denali_select_chip;
- chip->legacy.read_byte = denali_read_byte;
- chip->legacy.write_byte = denali_write_byte;
- chip->legacy.cmd_ctrl = denali_cmd_ctrl;
- chip->legacy.waitfunc = denali_waitfunc;
-
- if (features & FEATURES__INDEX_ADDR) {
- denali->host_read = denali_indexed_read;
- denali->host_write = denali_indexed_write;
- } else {
- denali->host_read = denali_direct_read;
- denali->host_write = denali_direct_write;
+ if (denali->dma_avail) {
+ chip->options |= NAND_USE_BOUNCE_BUFFER;
+ chip->buf_align = 16;
}
/* clk rate info is needed for setup_data_interface */
if (!denali->clk_rate || !denali->clk_x_rate)
chip->options |= NAND_KEEP_TIMINGS;
- chip->legacy.dummy_controller.ops = &denali_controller_ops;
- ret = nand_scan(chip, denali->max_banks);
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+ chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.read_page = denali_read_page;
+ chip->ecc.write_page = denali_write_page;
+ chip->ecc.read_page_raw = denali_read_page_raw;
+ chip->ecc.write_page_raw = denali_write_page_raw;
+ chip->ecc.read_oob = denali_read_oob;
+ chip->ecc.write_oob = denali_write_oob;
+
+ mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
+
+ ret = nand_scan(chip, dchip->nsels);
if (ret)
- goto disable_irq;
+ return ret;
ret = mtd_device_register(mtd, NULL, 0);
if (ret) {
@@ -1312,20 +1235,111 @@ int denali_init(struct denali_nand_info *denali)
goto cleanup_nand;
}
+ list_add_tail(&dchip->node, &denali->chips);
+
return 0;
cleanup_nand:
nand_cleanup(chip);
-disable_irq:
- denali_disable_irq(denali);
return ret;
}
+EXPORT_SYMBOL_GPL(denali_chip_init);
+
+int denali_init(struct denali_controller *denali)
+{
+ u32 features = ioread32(denali->reg + FEATURES);
+ int ret;
+
+ nand_controller_init(&denali->controller);
+ denali->controller.ops = &denali_controller_ops;
+ init_completion(&denali->complete);
+ spin_lock_init(&denali->irq_lock);
+ INIT_LIST_HEAD(&denali->chips);
+ denali->active_bank = DENALI_INVALID_BANK;
+
+ /*
+ * The REVISION register may not be reliable. Platforms are allowed to
+ * override it.
+ */
+ if (!denali->revision)
+ denali->revision = swab16(ioread32(denali->reg + REVISION));
+
+ denali->nbanks = 1 << FIELD_GET(FEATURES__N_BANKS, features);
+
+ /* the encoding changed from rev 5.0 to 5.1 */
+ if (denali->revision < 0x0501)
+ denali->nbanks <<= 1;
+
+ if (features & FEATURES__DMA)
+ denali->dma_avail = true;
+
+ if (denali->dma_avail) {
+ int dma_bit = denali->caps & DENALI_CAP_DMA_64BIT ? 64 : 32;
+
+ ret = dma_set_mask(denali->dev, DMA_BIT_MASK(dma_bit));
+ if (ret) {
+ dev_info(denali->dev,
+ "Failed to set DMA mask. Disabling DMA.\n");
+ denali->dma_avail = false;
+ }
+ }
+
+ if (denali->dma_avail) {
+ if (denali->caps & DENALI_CAP_DMA_64BIT)
+ denali->setup_dma = denali_setup_dma64;
+ else
+ denali->setup_dma = denali_setup_dma32;
+ }
+
+ if (features & FEATURES__INDEX_ADDR) {
+ denali->host_read = denali_indexed_read;
+ denali->host_write = denali_indexed_write;
+ } else {
+ denali->host_read = denali_direct_read;
+ denali->host_write = denali_direct_write;
+ }
+
+ /*
+ * Set how many bytes should be skipped before writing data in OOB.
+ * If a non-zero value has already been set (by firmware or something),
+ * just use it. Otherwise, set the driver's default.
+ */
+ denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES);
+ if (!denali->oob_skip_bytes) {
+ denali->oob_skip_bytes = DENALI_DEFAULT_OOB_SKIP_BYTES;
+ iowrite32(denali->oob_skip_bytes,
+ denali->reg + SPARE_AREA_SKIP_BYTES);
+ }
+
+ iowrite32(0, denali->reg + TRANSFER_SPARE_REG);
+ iowrite32(GENMASK(denali->nbanks - 1, 0), denali->reg + RB_PIN_ENABLED);
+ iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);
+ iowrite32(ECC_ENABLE__FLAG, denali->reg + ECC_ENABLE);
+ iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER);
+
+ denali_clear_irq_all(denali);
+
+ ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
+ IRQF_SHARED, DENALI_NAND_NAME, denali);
+ if (ret) {
+ dev_err(denali->dev, "Unable to request IRQ\n");
+ return ret;
+ }
+
+ denali_enable_irq(denali);
+
+ return 0;
+}
EXPORT_SYMBOL(denali_init);
-void denali_remove(struct denali_nand_info *denali)
+void denali_remove(struct denali_controller *denali)
{
- nand_release(&denali->nand);
+ struct denali_chip *dchip;
+
+ list_for_each_entry(dchip, &denali->chips, node)
+ nand_release(&dchip->chip);
+
denali_disable_irq(denali);
}
EXPORT_SYMBOL(denali_remove);
diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h
index c8c2620fc736..e5cdcda56d14 100644
--- a/drivers/mtd/nand/raw/denali.h
+++ b/drivers/mtd/nand/raw/denali.h
@@ -9,6 +9,7 @@
#include <linux/bits.h>
#include <linux/completion.h>
+#include <linux/list.h>
#include <linux/mtd/rawnand.h>
#include <linux/spinlock_types.h>
#include <linux/types.h>
@@ -290,38 +291,108 @@
#define CHNL_ACTIVE__CHANNEL2 BIT(2)
#define CHNL_ACTIVE__CHANNEL3 BIT(3)
-struct denali_nand_info {
- struct nand_chip nand;
- unsigned long clk_rate; /* core clock rate */
- unsigned long clk_x_rate; /* bus interface clock rate */
- int active_bank; /* currently selected bank */
+/**
+ * struct denali_chip_sel - per-CS data of Denali NAND
+ *
+ * @bank: bank id of the controller this CS is connected to
+ * @hwhr2_and_we_2_re: value of timing register HWHR2_AND_WE_2_RE
+ * @tcwaw_and_addr_2_data: value of timing register TCWAW_AND_ADDR_2_DATA
+ * @re_2_we: value of timing register RE_2_WE
+ * @acc_clks: value of timing register ACC_CLKS
+ * @rdwr_en_lo_cnt: value of timing register RDWR_EN_LO_CNT
+ * @rdwr_en_hi_cnt: value of timing register RDWR_EN_HI_CNT
+ * @cs_setup_cnt: value of timing register CS_SETUP_CNT
+ * @re_2_re: value of timing register RE_2_RE
+ */
+struct denali_chip_sel {
+ int bank;
+ u32 hwhr2_and_we_2_re;
+ u32 tcwaw_and_addr_2_data;
+ u32 re_2_we;
+ u32 acc_clks;
+ u32 rdwr_en_lo_cnt;
+ u32 rdwr_en_hi_cnt;
+ u32 cs_setup_cnt;
+ u32 re_2_re;
+};
+
+/**
+ * struct denali_chip - per-chip data of Denali NAND
+ *
+ * @chip: base NAND chip structure
+ * @node: node to be used to associate this chip with the controller
+ * @nsels: the number of CS lines of this chip
+ * @sels: the array of per-cs data
+ */
+struct denali_chip {
+ struct nand_chip chip;
+ struct list_head node;
+ unsigned int nsels;
+ struct denali_chip_sel sels[0];
+};
+
+/**
+ * struct denali_controller - Denali NAND controller data
+ *
+ * @controller: base NAND controller structure
+ * @dev: device
+ * @chips: the list of chips attached to this controller
+ * @clk_rate: frequency of core clock
+ * @clk_x_rate: frequency of bus interface clock
+ * @reg: base of Register Interface
+ * @host: base of Host Data/Command interface
+ * @complete: completion used to wait for interrupts
+ * @irq: interrupt number
+ * @irq_mask: interrupt bits the controller is waiting for
+ * @irq_status: interrupt bits of events that have happened
+ * @irq_lock: lock to protect @irq_mask and @irq_status
+ * @dma_avail: set if DMA engine is available
+ * @devs_per_cs: number of devices connected in parallel
+ * @oob_skip_bytes: number of bytes in OOB skipped by the ECC engine
+ * @active_bank: active bank id
+ * @nbanks: the number of banks supported by this controller
+ * @revision: IP revision
+ * @caps: controller capabilities that cannot be detected run-time
+ * @ecc_caps: ECC engine capabilities
+ * @host_read: callback for read access of Host Data/Command Interface
+ * @host_write: callback for write access of Host Data/Command Interface
+ * @setup_dma: callback for setup of the Data DMA
+ */
+struct denali_controller {
+ struct nand_controller controller;
struct device *dev;
- void __iomem *reg; /* Register Interface */
- void __iomem *host; /* Host Data/Command Interface */
+ struct list_head chips;
+ unsigned long clk_rate;
+ unsigned long clk_x_rate;
+ void __iomem *reg;
+ void __iomem *host;
struct completion complete;
- spinlock_t irq_lock; /* protect irq_mask and irq_status */
- u32 irq_mask; /* interrupts we are waiting for */
- u32 irq_status; /* interrupts that have happened */
int irq;
- void *buf; /* for syndrome layout conversion */
- int dma_avail; /* can support DMA? */
- int devs_per_cs; /* devices connected in parallel */
- int oob_skip_bytes; /* number of bytes reserved for BBM */
- int max_banks;
- unsigned int revision; /* IP revision */
- unsigned int caps; /* IP capability (or quirk) */
+ u32 irq_mask;
+ u32 irq_status;
+ spinlock_t irq_lock;
+ bool dma_avail;
+ int devs_per_cs;
+ int oob_skip_bytes;
+ int active_bank;
+ int nbanks;
+ unsigned int revision;
+ unsigned int caps;
const struct nand_ecc_caps *ecc_caps;
- u32 (*host_read)(struct denali_nand_info *denali, u32 addr);
- void (*host_write)(struct denali_nand_info *denali, u32 addr, u32 data);
- void (*setup_dma)(struct denali_nand_info *denali, dma_addr_t dma_addr,
- int page, int write);
+ u32 (*host_read)(struct denali_controller *denali, u32 addr);
+ void (*host_write)(struct denali_controller *denali, u32 addr,
+ u32 data);
+ void (*setup_dma)(struct denali_controller *denali, dma_addr_t dma_addr,
+ int page, bool write);
};
#define DENALI_CAP_HW_ECC_FIXUP BIT(0)
#define DENALI_CAP_DMA_64BIT BIT(1)
int denali_calc_ecc_bytes(int step_size, int strength);
-int denali_init(struct denali_nand_info *denali);
-void denali_remove(struct denali_nand_info *denali);
+int denali_chip_init(struct denali_controller *denali,
+ struct denali_chip *dchip);
+int denali_init(struct denali_controller *denali);
+void denali_remove(struct denali_controller *denali);
#endif /* __DENALI_H__ */
diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c
index 0b5ae2418815..5e14836f6bd5 100644
--- a/drivers/mtd/nand/raw/denali_dt.c
+++ b/drivers/mtd/nand/raw/denali_dt.c
@@ -18,7 +18,7 @@
#include "denali.h"
struct denali_dt {
- struct denali_nand_info denali;
+ struct denali_controller controller;
struct clk *clk; /* core clock */
struct clk *clk_x; /* bus interface clock */
struct clk *clk_ecc; /* ECC circuit clock */
@@ -71,19 +71,92 @@ static const struct of_device_id denali_nand_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, denali_nand_dt_ids);
+static int denali_dt_chip_init(struct denali_controller *denali,
+ struct device_node *chip_np)
+{
+ struct denali_chip *dchip;
+ u32 bank;
+ int nsels, i, ret;
+
+ nsels = of_property_count_u32_elems(chip_np, "reg");
+ if (nsels < 0)
+ return nsels;
+
+ dchip = devm_kzalloc(denali->dev, struct_size(dchip, sels, nsels),
+ GFP_KERNEL);
+ if (!dchip)
+ return -ENOMEM;
+
+ dchip->nsels = nsels;
+
+ for (i = 0; i < nsels; i++) {
+ ret = of_property_read_u32_index(chip_np, "reg", i, &bank);
+ if (ret)
+ return ret;
+
+ dchip->sels[i].bank = bank;
+
+ nand_set_flash_node(&dchip->chip, chip_np);
+ }
+
+ return denali_chip_init(denali, dchip);
+}
+
+/* Backward compatibility for old platforms */
+static int denali_dt_legacy_chip_init(struct denali_controller *denali)
+{
+ struct denali_chip *dchip;
+ int nsels, i;
+
+ nsels = denali->nbanks;
+
+ dchip = devm_kzalloc(denali->dev, struct_size(dchip, sels, nsels),
+ GFP_KERNEL);
+ if (!dchip)
+ return -ENOMEM;
+
+ dchip->nsels = nsels;
+
+ for (i = 0; i < nsels; i++)
+ dchip->sels[i].bank = i;
+
+ nand_set_flash_node(&dchip->chip, denali->dev->of_node);
+
+ return denali_chip_init(denali, dchip);
+}
+
+/*
+ * Check the DT binding.
+ * The new binding expects chip subnodes in the controller node.
+ * So, #address-cells = <1>; #size-cells = <0>; are required.
+ * Check the #size-cells to distinguish the binding.
+ */
+static bool denali_dt_is_legacy_binding(struct device_node *np)
+{
+ u32 cells;
+ int ret;
+
+ ret = of_property_read_u32(np, "#size-cells", &cells);
+ if (ret)
+ return true;
+
+ return cells != 0;
+}
+
static int denali_dt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res;
struct denali_dt *dt;
const struct denali_dt_data *data;
- struct denali_nand_info *denali;
+ struct denali_controller *denali;
+ struct device_node *np;
int ret;
dt = devm_kzalloc(dev, sizeof(*dt), GFP_KERNEL);
if (!dt)
return -ENOMEM;
- denali = &dt->denali;
+ denali = &dt->controller;
data = of_device_get_match_data(dev);
if (data) {
@@ -140,9 +213,26 @@ static int denali_dt_probe(struct platform_device *pdev)
if (ret)
goto out_disable_clk_ecc;
+ if (denali_dt_is_legacy_binding(dev->of_node)) {
+ ret = denali_dt_legacy_chip_init(denali);
+ if (ret)
+ goto out_remove_denali;
+ } else {
+ for_each_child_of_node(dev->of_node, np) {
+ ret = denali_dt_chip_init(denali, np);
+ if (ret) {
+ of_node_put(np);
+ goto out_remove_denali;
+ }
+ }
+ }
+
platform_set_drvdata(pdev, dt);
+
return 0;
+out_remove_denali:
+ denali_remove(denali);
out_disable_clk_ecc:
clk_disable_unprepare(dt->clk_ecc);
out_disable_clk_x:
@@ -157,7 +247,7 @@ static int denali_dt_remove(struct platform_device *pdev)
{
struct denali_dt *dt = platform_get_drvdata(pdev);
- denali_remove(&dt->denali);
+ denali_remove(&dt->controller);
clk_disable_unprepare(dt->clk_ecc);
clk_disable_unprepare(dt->clk_x);
clk_disable_unprepare(dt->clk);
diff --git a/drivers/mtd/nand/raw/denali_pci.c b/drivers/mtd/nand/raw/denali_pci.c
index 48e9ac54ad53..d62aa5271753 100644
--- a/drivers/mtd/nand/raw/denali_pci.c
+++ b/drivers/mtd/nand/raw/denali_pci.c
@@ -29,10 +29,11 @@ NAND_ECC_CAPS_SINGLE(denali_pci_ecc_caps, denali_calc_ecc_bytes, 512, 8, 15);
static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
- int ret;
resource_size_t csr_base, mem_base;
unsigned long csr_len, mem_len;
- struct denali_nand_info *denali;
+ struct denali_controller *denali;
+ struct denali_chip *dchip;
+ int nsels, ret, i;
denali = devm_kzalloc(&dev->dev, sizeof(*denali), GFP_KERNEL);
if (!denali)
@@ -64,7 +65,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->dev = &dev->dev;
denali->irq = dev->irq;
denali->ecc_caps = &denali_pci_ecc_caps;
- denali->nand.ecc.options |= NAND_ECC_MAXIMIZE;
denali->clk_rate = 50000000; /* 50 MHz */
denali->clk_x_rate = 200000000; /* 200 MHz */
@@ -84,27 +84,49 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (!denali->host) {
dev_err(&dev->dev, "Spectra: ioremap_nocache failed!");
ret = -ENOMEM;
- goto failed_remap_reg;
+ goto out_unmap_reg;
}
ret = denali_init(denali);
if (ret)
- goto failed_remap_mem;
+ goto out_unmap_host;
+
+ nsels = denali->nbanks;
+
+ dchip = devm_kzalloc(denali->dev, struct_size(dchip, sels, nsels),
+ GFP_KERNEL);
+ if (!dchip) {
+ ret = -ENOMEM;
+ goto out_remove_denali;
+ }
+
+ dchip->chip.ecc.options |= NAND_ECC_MAXIMIZE;
+
+ dchip->nsels = nsels;
+
+ for (i = 0; i < nsels; i++)
+ dchip->sels[i].bank = i;
+
+ ret = denali_chip_init(denali, dchip);
+ if (ret)
+ goto out_remove_denali;
pci_set_drvdata(dev, denali);
return 0;
-failed_remap_mem:
+out_remove_denali:
+ denali_remove(denali);
+out_unmap_host:
iounmap(denali->host);
-failed_remap_reg:
+out_unmap_reg:
iounmap(denali->reg);
return ret;
}
static void denali_pci_remove(struct pci_dev *dev)
{
- struct denali_nand_info *denali = pci_get_drvdata(dev);
+ struct denali_controller *denali = pci_get_drvdata(dev);
denali_remove(denali);
iounmap(denali->reg);
diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c
index 53f57e0f007e..f430c4bf0323 100644
--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1028,6 +1028,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
{
struct nand_chip *this = mtd_to_nand(mtd);
struct doc_priv *doc = nand_get_controller_data(this);
+ struct nand_memory_organization *memorg;
int ret = 0;
u_char *buf;
struct NFTLMediaHeader *mh;
@@ -1036,6 +1037,8 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
unsigned blocks, maxblocks;
int offs, numheaders;
+ memorg = nanddev_get_memorg(&this->base);
+
buf = kmalloc(mtd->writesize, GFP_KERNEL);
if (!buf) {
return 0;
@@ -1082,6 +1085,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
implementation of the NAND layer. */
if (mh->UnitSizeFactor != 0xff) {
this->bbt_erase_shift += (0xff - mh->UnitSizeFactor);
+ memorg->pages_per_eraseblock <<= (0xff - mh->UnitSizeFactor);
mtd->erasesize <<= (0xff - mh->UnitSizeFactor);
pr_info("Setting virtual erase size to %d\n", mtd->erasesize);
blocks = mtd->size >> this->bbt_erase_shift;
@@ -1287,7 +1291,7 @@ static int __init inftl_scan_bbt(struct mtd_info *mtd)
struct doc_priv *doc = nand_get_controller_data(this);
struct mtd_partition parts[5];
- if (this->numchips > doc->chips_per_floor) {
+ if (nanddev_ntargets(&this->base) > doc->chips_per_floor) {
pr_err("Multi-floor INFTL devices not yet supported.\n");
return -EIO;
}
@@ -1477,6 +1481,7 @@ static int __init doc_probe(unsigned long physadr)
break;
case DOC_ChipID_DocMilPlus32:
pr_err("DiskOnChip Millennium Plus 32MB is not supported, ignoring.\n");
+ /* fall through */
default:
ret = -ENODEV;
goto notfound;
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index 70f0d2b450ea..423828ff68e6 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -355,6 +355,15 @@ static void fsl_elbc_cmdfunc(struct nand_chip *chip, unsigned int command,
fsl_elbc_run_command(mtd);
return;
+ /* RNDOUT moves the pointer inside the page */
+ case NAND_CMD_RNDOUT:
+ dev_dbg(priv->dev,
+ "fsl_elbc_cmdfunc: NAND_CMD_RNDOUT, column: 0x%x.\n",
+ column);
+
+ elbc_fcm_ctrl->index = column;
+ return;
+
/* READOOB reads only the OOB because no ECC is performed. */
case NAND_CMD_READOOB:
dev_vdbg(priv->dev,
@@ -635,79 +644,6 @@ static int fsl_elbc_wait(struct nand_chip *chip)
return (elbc_fcm_ctrl->mdr & 0xff) | NAND_STATUS_WP;
}
-static int fsl_elbc_attach_chip(struct nand_chip *chip)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
- struct fsl_lbc_ctrl *ctrl = priv->ctrl;
- struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
- unsigned int al;
-
- /* calculate FMR Address Length field */
- al = 0;
- if (chip->pagemask & 0xffff0000)
- al++;
- if (chip->pagemask & 0xff000000)
- al++;
-
- priv->fmr |= al << FMR_AL_SHIFT;
-
- dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n",
- chip->numchips);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
- chip->chipsize);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
- chip->pagemask);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->legacy.chip_delay = %d\n",
- chip->legacy.chip_delay);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->badblockpos = %d\n",
- chip->badblockpos);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_shift = %d\n",
- chip->chip_shift);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->page_shift = %d\n",
- chip->page_shift);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
- chip->phys_erase_shift);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
- chip->ecc.mode);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
- chip->ecc.steps);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
- chip->ecc.bytes);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
- chip->ecc.total);
- dev_dbg(priv->dev, "fsl_elbc_init: mtd->ooblayout = %p\n",
- mtd->ooblayout);
- dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
- dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
- dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
- mtd->erasesize);
- dev_dbg(priv->dev, "fsl_elbc_init: mtd->writesize = %d\n",
- mtd->writesize);
- dev_dbg(priv->dev, "fsl_elbc_init: mtd->oobsize = %d\n",
- mtd->oobsize);
-
- /* adjust Option Register and ECC to match Flash page size */
- if (mtd->writesize == 512) {
- priv->page_size = 0;
- clrbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
- } else if (mtd->writesize == 2048) {
- priv->page_size = 1;
- setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
- } else {
- dev_err(priv->dev,
- "fsl_elbc_init: page size %d is not supported\n",
- mtd->writesize);
- return -ENOTSUPP;
- }
-
- return 0;
-}
-
-static const struct nand_controller_ops fsl_elbc_controller_ops = {
- .attach_chip = fsl_elbc_attach_chip,
-};
-
static int fsl_elbc_read_page(struct nand_chip *chip, uint8_t *buf,
int oob_required, int page)
{
@@ -794,27 +730,116 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
chip->controller = &elbc_fcm_ctrl->controller;
nand_set_controller_data(chip, priv);
- chip->ecc.read_page = fsl_elbc_read_page;
- chip->ecc.write_page = fsl_elbc_write_page;
- chip->ecc.write_subpage = fsl_elbc_write_subpage;
-
- /* If CS Base Register selects full hardware ECC then use it */
- if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
- BR_DECC_CHK_GEN) {
- chip->ecc.mode = NAND_ECC_HW;
- mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
- chip->ecc.size = 512;
- chip->ecc.bytes = 3;
- chip->ecc.strength = 1;
+ return 0;
+}
+
+static int fsl_elbc_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ unsigned int al;
+
+ switch (chip->ecc.mode) {
+ /*
+ * if ECC was not chosen in DT, decide whether to use HW or SW ECC from
+ * CS Base Register
+ */
+ case NAND_ECC_NONE:
+ /* If CS Base Register selects full hardware ECC then use it */
+ if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
+ BR_DECC_CHK_GEN) {
+ chip->ecc.read_page = fsl_elbc_read_page;
+ chip->ecc.write_page = fsl_elbc_write_page;
+ chip->ecc.write_subpage = fsl_elbc_write_subpage;
+
+ chip->ecc.mode = NAND_ECC_HW;
+ mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 3;
+ chip->ecc.strength = 1;
+ } else {
+ /* otherwise fall back to default software ECC */
+ chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
+ }
+ break;
+
+ /* if SW ECC was chosen in DT, we do not need to set anything here */
+ case NAND_ECC_SOFT:
+ break;
+
+ /* should we also implement NAND_ECC_HW to do as the code above? */
+ default:
+ return -EINVAL;
+ }
+
+ /* calculate FMR Address Length field */
+ al = 0;
+ if (chip->pagemask & 0xffff0000)
+ al++;
+ if (chip->pagemask & 0xff000000)
+ al++;
+
+ priv->fmr |= al << FMR_AL_SHIFT;
+
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n",
+ nanddev_ntargets(&chip->base));
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
+ nanddev_target_size(&chip->base));
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
+ chip->pagemask);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->legacy.chip_delay = %d\n",
+ chip->legacy.chip_delay);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->badblockpos = %d\n",
+ chip->badblockpos);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_shift = %d\n",
+ chip->chip_shift);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->page_shift = %d\n",
+ chip->page_shift);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
+ chip->phys_erase_shift);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
+ chip->ecc.mode);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
+ chip->ecc.steps);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
+ chip->ecc.bytes);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
+ chip->ecc.total);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->ooblayout = %p\n",
+ mtd->ooblayout);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
+ mtd->erasesize);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->writesize = %d\n",
+ mtd->writesize);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->oobsize = %d\n",
+ mtd->oobsize);
+
+ /* adjust Option Register and ECC to match Flash page size */
+ if (mtd->writesize == 512) {
+ priv->page_size = 0;
+ clrbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
+ } else if (mtd->writesize == 2048) {
+ priv->page_size = 1;
+ setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
} else {
- /* otherwise fall back to default software ECC */
- chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ dev_err(priv->dev,
+ "fsl_elbc_init: page size %d is not supported\n",
+ mtd->writesize);
+ return -ENOTSUPP;
}
return 0;
}
+static const struct nand_controller_ops fsl_elbc_controller_ops = {
+ .attach_chip = fsl_elbc_attach_chip,
+};
+
static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
{
struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index e65d274399f9..04a3dcd675bf 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -722,9 +722,9 @@ static int fsl_ifc_attach_chip(struct nand_chip *chip)
struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
dev_dbg(priv->dev, "%s: nand->numchips = %d\n", __func__,
- chip->numchips);
+ nanddev_ntargets(&chip->base));
dev_dbg(priv->dev, "%s: nand->chipsize = %lld\n", __func__,
- chip->chipsize);
+ nanddev_target_size(&chip->base));
dev_dbg(priv->dev, "%s: nand->pagemask = %8x\n", __func__,
chip->pagemask);
dev_dbg(priv->dev, "%s: nand->legacy.chip_delay = %d\n", __func__,
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
index a4768df5083f..a8b26d2e793c 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
@@ -157,8 +157,7 @@ int gpmi_init(struct gpmi_nand_data *this)
* Reset BCH here, too. We got failures otherwise :(
* See later BCH reset for explanation of MX23 and MX28 handling
*/
- ret = gpmi_reset_block(r->bch_regs,
- GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
+ ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MXS(this));
if (ret)
goto err_out;
@@ -266,8 +265,7 @@ int bch_set_geometry(struct gpmi_nand_data *this)
* chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
* and MX28.
*/
- ret = gpmi_reset_block(r->bch_regs,
- GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
+ ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MXS(this));
if (ret)
goto err_out;
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index ed405c9434fe..40df20d1adf5 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -171,7 +171,7 @@ static inline bool gpmi_check_ecc(struct gpmi_nand_data *this)
struct bch_geometry *geo = &this->bch_geometry;
/* Do the sanity check. */
- if (GPMI_IS_MX23(this) || GPMI_IS_MX28(this)) {
+ if (GPMI_IS_MXS(this)) {
/* The mx23/mx28 only support the GF13. */
if (geo->gf_len == 14)
return false;
@@ -204,7 +204,8 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this,
default:
dev_err(this->dev,
"unsupported nand chip. ecc bits : %d, ecc size : %d\n",
- chip->ecc_strength_ds, chip->ecc_step_ds);
+ chip->base.eccreq.strength,
+ chip->base.eccreq.step_size);
return -EINVAL;
}
geo->ecc_chunk_size = ecc_step;
@@ -417,11 +418,13 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this)
if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
|| legacy_set_geometry(this)) {
- if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
+ if (!(chip->base.eccreq.strength > 0 &&
+ chip->base.eccreq.step_size > 0))
return -EINVAL;
- return set_geometry_by_ecc_info(this, chip->ecc_strength_ds,
- chip->ecc_step_ds);
+ return set_geometry_by_ecc_info(this,
+ chip->base.eccreq.strength,
+ chip->base.eccreq.step_size);
}
return 0;
@@ -1602,7 +1605,7 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this)
unsigned int search_area_size_in_strides;
unsigned int stride;
unsigned int page;
- uint8_t *buffer = chip->data_buf;
+ u8 *buffer = nand_get_data_buf(chip);
int saved_chip_number;
int found_an_ncb_fingerprint = false;
@@ -1664,7 +1667,7 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this)
unsigned int block;
unsigned int stride;
unsigned int page;
- uint8_t *buffer = chip->data_buf;
+ u8 *buffer = nand_get_data_buf(chip);
int saved_chip_number;
int status;
@@ -1753,7 +1756,7 @@ static int mx23_boot_init(struct gpmi_nand_data *this)
dev_dbg(dev, "Transcribing bad block marks...\n");
/* Compute the number of blocks in the entire medium. */
- block_count = chip->chipsize >> chip->phys_erase_shift;
+ block_count = nanddev_eraseblocks_per_target(&chip->base);
/*
* Loop over all the blocks in the medium, transcribing block marks as
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
index d0b79bac2728..a804a4a5bd46 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
@@ -207,4 +207,5 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || \
GPMI_IS_MX7D(x))
+#define GPMI_IS_MXS(x) (GPMI_IS_MX23(x) || GPMI_IS_MX28(x))
#endif
diff --git a/drivers/mtd/nand/raw/hisi504_nand.c b/drivers/mtd/nand/raw/hisi504_nand.c
index f3f9aa160cff..e4526fff9da4 100644
--- a/drivers/mtd/nand/raw/hisi504_nand.c
+++ b/drivers/mtd/nand/raw/hisi504_nand.c
@@ -849,7 +849,7 @@ static int hisi_nfc_resume(struct device *dev)
struct hinfc_host *host = dev_get_drvdata(dev);
struct nand_chip *chip = &host->chip;
- for (cs = 0; cs < chip->numchips; cs++)
+ for (cs = 0; cs < nanddev_ntargets(&chip->base); cs++)
hisi_nfc_send_cmd_reset(host, cs);
hinfc_write(host, SET_HINFC504_PWIDTH(HINFC504_W_LATCH,
HINFC504_R_LATCH, HINFC504_RW_LATCH), HINFC504_PWIDTH);
diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig
new file mode 100644
index 000000000000..7cfc77021154
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Kconfig
@@ -0,0 +1,50 @@
+config MTD_NAND_JZ4740
+ tristate "JZ4740 NAND controller"
+ depends on MACH_JZ4740 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND Flash on JZ4740 SoC based boards.
+
+config MTD_NAND_JZ4780
+ tristate "JZ4780 NAND controller"
+ depends on JZ4780_NEMC
+ help
+ Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
+ based boards, using the BCH controller for hardware error correction.
+
+if MTD_NAND_JZ4780
+
+config MTD_NAND_INGENIC_ECC
+ tristate
+
+config MTD_NAND_JZ4740_ECC
+ tristate "Hardware BCH support for JZ4740 SoC"
+ select MTD_NAND_INGENIC_ECC
+ help
+ Enable this driver to support the Reed-Solomon error-correction
+ hardware present on the JZ4740 SoC from Ingenic.
+
+ This driver can also be built as a module. If so, the module
+ will be called jz4740-ecc.
+
+config MTD_NAND_JZ4725B_BCH
+ tristate "Hardware BCH support for JZ4725B SoC"
+ select MTD_NAND_INGENIC_ECC
+ help
+ Enable this driver to support the BCH error-correction hardware
+ present on the JZ4725B SoC from Ingenic.
+
+ This driver can also be built as a module. If so, the module
+ will be called jz4725b-bch.
+
+config MTD_NAND_JZ4780_BCH
+ tristate "Hardware BCH support for JZ4780 SoC"
+ select MTD_NAND_INGENIC_ECC
+ help
+ Enable this driver to support the BCH error-correction hardware
+ present on the JZ4780 SoC from Ingenic.
+
+ This driver can also be built as a module. If so, the module
+ will be called jz4780-bch.
+
+endif # MTD_NAND_JZ4780
diff --git a/drivers/mtd/nand/raw/ingenic/Makefile b/drivers/mtd/nand/raw/ingenic/Makefile
new file mode 100644
index 000000000000..ab2c5f47e5b7
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_JZ4780) += ingenic_nand.o
+
+obj-$(CONFIG_MTD_NAND_INGENIC_ECC) += ingenic_ecc.o
+obj-$(CONFIG_MTD_NAND_JZ4740_ECC) += jz4740_ecc.o
+obj-$(CONFIG_MTD_NAND_JZ4725B_BCH) += jz4725b_bch.o
+obj-$(CONFIG_MTD_NAND_JZ4780_BCH) += jz4780_bch.o
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
new file mode 100644
index 000000000000..d3e085c5685a
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx ECC common code
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+/**
+ * ingenic_ecc_calculate() - calculate ECC for a data buffer
+ * @ecc: ECC device.
+ * @params: ECC parameters.
+ * @buf: input buffer with raw data.
+ * @ecc_code: output buffer with ECC.
+ *
+ * Return: 0 on success, -ETIMEDOUT if timed out while waiting for ECC
+ * controller.
+ */
+int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code)
+{
+ return ecc->ops->calculate(ecc, params, buf, ecc_code);
+}
+EXPORT_SYMBOL(ingenic_ecc_calculate);
+
+/**
+ * ingenic_ecc_correct() - detect and correct bit errors
+ * @ecc: ECC device.
+ * @params: ECC parameters.
+ * @buf: raw data read from the chip.
+ * @ecc_code: ECC read from the chip.
+ *
+ * Given the raw data and the ECC read from the NAND device, detects and
+ * corrects errors in the data.
+ *
+ * Return: the number of bit errors corrected, -EBADMSG if there are too many
+ * errors to correct or -ETIMEDOUT if we timed out waiting for the controller.
+ */
+int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ u8 *buf, u8 *ecc_code)
+{
+ return ecc->ops->correct(ecc, params, buf, ecc_code);
+}
+EXPORT_SYMBOL(ingenic_ecc_correct);
+
+/**
+ * ingenic_ecc_get() - get the ECC controller device
+ * @np: ECC device tree node.
+ *
+ * Gets the ECC controller device from the specified device tree node. The
+ * device must be released with ingenic_ecc_release() when it is no longer being
+ * used.
+ *
+ * Return: a pointer to ingenic_ecc, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+static struct ingenic_ecc *ingenic_ecc_get(struct device_node *np)
+{
+ struct platform_device *pdev;
+ struct ingenic_ecc *ecc;
+
+ pdev = of_find_device_by_node(np);
+ if (!pdev || !platform_get_drvdata(pdev))
+ return ERR_PTR(-EPROBE_DEFER);
+
+ get_device(&pdev->dev);
+
+ ecc = platform_get_drvdata(pdev);
+ clk_prepare_enable(ecc->clk);
+
+ return ecc;
+}
+
+/**
+ * of_ingenic_ecc_get() - get the ECC controller from a DT node
+ * @of_node: the node that contains an ecc-engine property.
+ *
+ * Get the ecc-engine property from the given device tree
+ * node and pass it to ingenic_ecc_get to do the work.
+ *
+ * Return: a pointer to ingenic_ecc, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *of_node)
+{
+ struct ingenic_ecc *ecc = NULL;
+ struct device_node *np;
+
+ np = of_parse_phandle(of_node, "ecc-engine", 0);
+
+ /*
+ * If the ecc-engine property is not found, check for the deprecated
+ * ingenic,bch-controller property
+ */
+ if (!np)
+ np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
+
+ if (np) {
+ ecc = ingenic_ecc_get(np);
+ of_node_put(np);
+ }
+ return ecc;
+}
+EXPORT_SYMBOL(of_ingenic_ecc_get);
+
+/**
+ * ingenic_ecc_release() - release the ECC controller device
+ * @ecc: ECC device.
+ */
+void ingenic_ecc_release(struct ingenic_ecc *ecc)
+{
+ clk_disable_unprepare(ecc->clk);
+ put_device(ecc->dev);
+}
+EXPORT_SYMBOL(ingenic_ecc_release);
+
+int ingenic_ecc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ingenic_ecc *ecc;
+ struct resource *res;
+
+ ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
+ if (!ecc)
+ return -ENOMEM;
+
+ ecc->ops = device_get_match_data(dev);
+ if (!ecc->ops)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ecc->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ecc->base))
+ return PTR_ERR(ecc->base);
+
+ ecc->ops->disable(ecc);
+
+ ecc->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(ecc->clk)) {
+ dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(ecc->clk));
+ return PTR_ERR(ecc->clk);
+ }
+
+ mutex_init(&ecc->lock);
+
+ ecc->dev = dev;
+ platform_set_drvdata(pdev, ecc);
+
+ return 0;
+}
+EXPORT_SYMBOL(ingenic_ecc_probe);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
+MODULE_DESCRIPTION("Ingenic ECC common driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h
new file mode 100644
index 000000000000..2cda439b5e11
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__
+#define __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__
+
+#include <linux/compiler_types.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+#include <uapi/asm-generic/errno-base.h>
+
+struct clk;
+struct device;
+struct ingenic_ecc;
+struct platform_device;
+
+/**
+ * struct ingenic_ecc_params - ECC parameters
+ * @size: data bytes per ECC step.
+ * @bytes: ECC bytes per step.
+ * @strength: number of correctable bits per ECC step.
+ */
+struct ingenic_ecc_params {
+ int size;
+ int bytes;
+ int strength;
+};
+
+#if IS_ENABLED(CONFIG_MTD_NAND_INGENIC_ECC)
+int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code);
+int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params, u8 *buf,
+ u8 *ecc_code);
+
+void ingenic_ecc_release(struct ingenic_ecc *ecc);
+struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np);
+#else /* CONFIG_MTD_NAND_INGENIC_ECC */
+int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code)
+{
+ return -ENODEV;
+}
+
+int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params, u8 *buf,
+ u8 *ecc_code)
+{
+ return -ENODEV;
+}
+
+void ingenic_ecc_release(struct ingenic_ecc *ecc)
+{
+}
+
+struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np)
+{
+ return ERR_PTR(-ENODEV);
+}
+#endif /* CONFIG_MTD_NAND_INGENIC_ECC */
+
+struct ingenic_ecc_ops {
+ void (*disable)(struct ingenic_ecc *ecc);
+ int (*calculate)(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code);
+ int (*correct)(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ u8 *buf, u8 *ecc_code);
+};
+
+struct ingenic_ecc {
+ struct device *dev;
+ const struct ingenic_ecc_ops *ops;
+ void __iomem *base;
+ struct clk *clk;
+ struct mutex lock;
+};
+
+int ingenic_ecc_probe(struct platform_device *pdev);
+
+#endif /* __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__ */
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c
new file mode 100644
index 000000000000..d7b7c0f13909
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c
@@ -0,0 +1,530 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ47xx NAND driver
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/jz4780-nemc.h>
+
+#include "ingenic_ecc.h"
+
+#define DRV_NAME "ingenic-nand"
+
+/* Command delay when there is no R/B pin. */
+#define RB_DELAY_US 100
+
+struct jz_soc_info {
+ unsigned long data_offset;
+ unsigned long addr_offset;
+ unsigned long cmd_offset;
+ const struct mtd_ooblayout_ops *oob_layout;
+};
+
+struct ingenic_nand_cs {
+ unsigned int bank;
+ void __iomem *base;
+};
+
+struct ingenic_nfc {
+ struct device *dev;
+ struct ingenic_ecc *ecc;
+ const struct jz_soc_info *soc_info;
+ struct nand_controller controller;
+ unsigned int num_banks;
+ struct list_head chips;
+ int selected;
+ struct ingenic_nand_cs cs[];
+};
+
+struct ingenic_nand {
+ struct nand_chip chip;
+ struct list_head chip_list;
+
+ struct gpio_desc *busy_gpio;
+ struct gpio_desc *wp_gpio;
+ unsigned int reading: 1;
+};
+
+static inline struct ingenic_nand *to_ingenic_nand(struct mtd_info *mtd)
+{
+ return container_of(mtd_to_nand(mtd), struct ingenic_nand, chip);
+}
+
+static inline struct ingenic_nfc *to_ingenic_nfc(struct nand_controller *ctrl)
+{
+ return container_of(ctrl, struct ingenic_nfc, controller);
+}
+
+static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section || !ecc->total)
+ return -ERANGE;
+
+ oobregion->length = ecc->total;
+ oobregion->offset = 12;
+
+ return 0;
+}
+
+static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = mtd->oobsize - ecc->total - 12;
+ oobregion->offset = 12 + ecc->total;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
+ .ecc = qi_lb60_ooblayout_ecc,
+ .free = qi_lb60_ooblayout_free,
+};
+
+static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section || !ecc->total)
+ return -ERANGE;
+
+ oobregion->length = ecc->total;
+ oobregion->offset = 3;
+
+ return 0;
+}
+
+static int jz4725b_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = mtd->oobsize - ecc->total - 3;
+ oobregion->offset = 3 + ecc->total;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops jz4725b_ooblayout_ops = {
+ .ecc = jz4725b_ooblayout_ecc,
+ .free = jz4725b_ooblayout_free,
+};
+
+static void ingenic_nand_select_chip(struct nand_chip *chip, int chipnr)
+{
+ struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+ struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+ struct ingenic_nand_cs *cs;
+
+ /* Ensure the currently selected chip is deasserted. */
+ if (chipnr == -1 && nfc->selected >= 0) {
+ cs = &nfc->cs[nfc->selected];
+ jz4780_nemc_assert(nfc->dev, cs->bank, false);
+ }
+
+ nfc->selected = chipnr;
+}
+
+static void ingenic_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
+ unsigned int ctrl)
+{
+ struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+ struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+ struct ingenic_nand_cs *cs;
+
+ if (WARN_ON(nfc->selected < 0))
+ return;
+
+ cs = &nfc->cs[nfc->selected];
+
+ jz4780_nemc_assert(nfc->dev, cs->bank, ctrl & NAND_NCE);
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_ALE)
+ writeb(cmd, cs->base + nfc->soc_info->addr_offset);
+ else if (ctrl & NAND_CLE)
+ writeb(cmd, cs->base + nfc->soc_info->cmd_offset);
+}
+
+static int ingenic_nand_dev_ready(struct nand_chip *chip)
+{
+ struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+
+ return !gpiod_get_value_cansleep(nand->busy_gpio);
+}
+
+static void ingenic_nand_ecc_hwctl(struct nand_chip *chip, int mode)
+{
+ struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+
+ nand->reading = (mode == NAND_ECC_READ);
+}
+
+static int ingenic_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat,
+ u8 *ecc_code)
+{
+ struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+ struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+ struct ingenic_ecc_params params;
+
+ /*
+ * Don't need to generate the ECC when reading, the ECC engine does it
+ * for us as part of decoding/correction.
+ */
+ if (nand->reading)
+ return 0;
+
+ params.size = nand->chip.ecc.size;
+ params.bytes = nand->chip.ecc.bytes;
+ params.strength = nand->chip.ecc.strength;
+
+ return ingenic_ecc_calculate(nfc->ecc, &params, dat, ecc_code);
+}
+
+static int ingenic_nand_ecc_correct(struct nand_chip *chip, u8 *dat,
+ u8 *read_ecc, u8 *calc_ecc)
+{
+ struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+ struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+ struct ingenic_ecc_params params;
+
+ params.size = nand->chip.ecc.size;
+ params.bytes = nand->chip.ecc.bytes;
+ params.strength = nand->chip.ecc.strength;
+
+ return ingenic_ecc_correct(nfc->ecc, &params, dat, read_ecc);
+}
+
+static int ingenic_nand_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct ingenic_nfc *nfc = to_ingenic_nfc(chip->controller);
+ int eccbytes;
+
+ if (chip->ecc.strength == 4) {
+ /* JZ4740 uses 9 bytes of ECC to correct maximum 4 errors */
+ chip->ecc.bytes = 9;
+ } else {
+ chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
+ (chip->ecc.strength / 8);
+ }
+
+ switch (chip->ecc.mode) {
+ case NAND_ECC_HW:
+ if (!nfc->ecc) {
+ dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
+ return -ENODEV;
+ }
+
+ chip->ecc.hwctl = ingenic_nand_ecc_hwctl;
+ chip->ecc.calculate = ingenic_nand_ecc_calculate;
+ chip->ecc.correct = ingenic_nand_ecc_correct;
+ /* fall through */
+ case NAND_ECC_SOFT:
+ dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
+ (nfc->ecc) ? "hardware ECC" : "software ECC",
+ chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
+ break;
+ case NAND_ECC_NONE:
+ dev_info(nfc->dev, "not using ECC\n");
+ break;
+ default:
+ dev_err(nfc->dev, "ECC mode %d not supported\n",
+ chip->ecc.mode);
+ return -EINVAL;
+ }
+
+ /* The NAND core will generate the ECC layout for SW ECC */
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return 0;
+
+ /* Generate ECC layout. ECC codes are right aligned in the OOB area. */
+ eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
+
+ if (eccbytes > mtd->oobsize - 2) {
+ dev_err(nfc->dev,
+ "invalid ECC config: required %d ECC bytes, but only %d are available",
+ eccbytes, mtd->oobsize - 2);
+ return -EINVAL;
+ }
+
+ /*
+ * The generic layout for BBT markers will most likely overlap with our
+ * ECC bytes in the OOB, so move the BBT markers outside the OOB area.
+ */
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+
+ /* For legacy reasons we use a different layout on the qi,lb60 board. */
+ if (of_machine_is_compatible("qi,lb60"))
+ mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
+ else
+ mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
+
+ return 0;
+}
+
+static const struct nand_controller_ops ingenic_nand_controller_ops = {
+ .attach_chip = ingenic_nand_attach_chip,
+};
+
+static int ingenic_nand_init_chip(struct platform_device *pdev,
+ struct ingenic_nfc *nfc,
+ struct device_node *np,
+ unsigned int chipnr)
+{
+ struct device *dev = &pdev->dev;
+ struct ingenic_nand *nand;
+ struct ingenic_nand_cs *cs;
+ struct resource *res;
+ struct nand_chip *chip;
+ struct mtd_info *mtd;
+ const __be32 *reg;
+ int ret = 0;
+
+ cs = &nfc->cs[chipnr];
+
+ reg = of_get_property(np, "reg", NULL);
+ if (!reg)
+ return -EINVAL;
+
+ cs->bank = be32_to_cpu(*reg);
+
+ jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr);
+ cs->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(cs->base))
+ return PTR_ERR(cs->base);
+
+ nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
+ if (!nand)
+ return -ENOMEM;
+
+ nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
+
+ if (IS_ERR(nand->busy_gpio)) {
+ ret = PTR_ERR(nand->busy_gpio);
+ dev_err(dev, "failed to request busy GPIO: %d\n", ret);
+ return ret;
+ } else if (nand->busy_gpio) {
+ nand->chip.legacy.dev_ready = ingenic_nand_dev_ready;
+ }
+
+ nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
+
+ if (IS_ERR(nand->wp_gpio)) {
+ ret = PTR_ERR(nand->wp_gpio);
+ dev_err(dev, "failed to request WP GPIO: %d\n", ret);
+ return ret;
+ }
+
+ chip = &nand->chip;
+ mtd = nand_to_mtd(chip);
+ mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
+ cs->bank);
+ if (!mtd->name)
+ return -ENOMEM;
+ mtd->dev.parent = dev;
+
+ chip->legacy.IO_ADDR_R = cs->base + nfc->soc_info->data_offset;
+ chip->legacy.IO_ADDR_W = cs->base + nfc->soc_info->data_offset;
+ chip->legacy.chip_delay = RB_DELAY_US;
+ chip->options = NAND_NO_SUBPAGE_WRITE;
+ chip->legacy.select_chip = ingenic_nand_select_chip;
+ chip->legacy.cmd_ctrl = ingenic_nand_cmd_ctrl;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->controller = &nfc->controller;
+ nand_set_flash_node(chip, np);
+
+ chip->controller->ops = &ingenic_nand_controller_ops;
+ ret = nand_scan(chip, 1);
+ if (ret)
+ return ret;
+
+ ret = mtd_device_register(mtd, NULL, 0);
+ if (ret) {
+ nand_release(chip);
+ return ret;
+ }
+
+ list_add_tail(&nand->chip_list, &nfc->chips);
+
+ return 0;
+}
+
+static void ingenic_nand_cleanup_chips(struct ingenic_nfc *nfc)
+{
+ struct ingenic_nand *chip;
+
+ while (!list_empty(&nfc->chips)) {
+ chip = list_first_entry(&nfc->chips,
+ struct ingenic_nand, chip_list);
+ nand_release(&chip->chip);
+ list_del(&chip->chip_list);
+ }
+}
+
+static int ingenic_nand_init_chips(struct ingenic_nfc *nfc,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np;
+ int i = 0;
+ int ret;
+ int num_chips = of_get_child_count(dev->of_node);
+
+ if (num_chips > nfc->num_banks) {
+ dev_err(dev, "found %d chips but only %d banks\n",
+ num_chips, nfc->num_banks);
+ return -EINVAL;
+ }
+
+ for_each_child_of_node(dev->of_node, np) {
+ ret = ingenic_nand_init_chip(pdev, nfc, np, i);
+ if (ret) {
+ ingenic_nand_cleanup_chips(nfc);
+ return ret;
+ }
+
+ i++;
+ }
+
+ return 0;
+}
+
+static int ingenic_nand_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ unsigned int num_banks;
+ struct ingenic_nfc *nfc;
+ int ret;
+
+ num_banks = jz4780_nemc_num_banks(dev);
+ if (num_banks == 0) {
+ dev_err(dev, "no banks found\n");
+ return -ENODEV;
+ }
+
+ nfc = devm_kzalloc(dev, struct_size(nfc, cs, num_banks), GFP_KERNEL);
+ if (!nfc)
+ return -ENOMEM;
+
+ nfc->soc_info = device_get_match_data(dev);
+ if (!nfc->soc_info)
+ return -EINVAL;
+
+ /*
+ * Check for ECC HW before we call nand_scan_ident, to prevent us from
+ * having to call it again if the ECC driver returns -EPROBE_DEFER.
+ */
+ nfc->ecc = of_ingenic_ecc_get(dev->of_node);
+ if (IS_ERR(nfc->ecc))
+ return PTR_ERR(nfc->ecc);
+
+ nfc->dev = dev;
+ nfc->num_banks = num_banks;
+
+ nand_controller_init(&nfc->controller);
+ INIT_LIST_HEAD(&nfc->chips);
+
+ ret = ingenic_nand_init_chips(nfc, pdev);
+ if (ret) {
+ if (nfc->ecc)
+ ingenic_ecc_release(nfc->ecc);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, nfc);
+ return 0;
+}
+
+static int ingenic_nand_remove(struct platform_device *pdev)
+{
+ struct ingenic_nfc *nfc = platform_get_drvdata(pdev);
+
+ if (nfc->ecc)
+ ingenic_ecc_release(nfc->ecc);
+
+ ingenic_nand_cleanup_chips(nfc);
+
+ return 0;
+}
+
+static const struct jz_soc_info jz4740_soc_info = {
+ .data_offset = 0x00000000,
+ .cmd_offset = 0x00008000,
+ .addr_offset = 0x00010000,
+ .oob_layout = &nand_ooblayout_lp_ops,
+};
+
+static const struct jz_soc_info jz4725b_soc_info = {
+ .data_offset = 0x00000000,
+ .cmd_offset = 0x00008000,
+ .addr_offset = 0x00010000,
+ .oob_layout = &jz4725b_ooblayout_ops,
+};
+
+static const struct jz_soc_info jz4780_soc_info = {
+ .data_offset = 0x00000000,
+ .cmd_offset = 0x00400000,
+ .addr_offset = 0x00800000,
+ .oob_layout = &nand_ooblayout_lp_ops,
+};
+
+static const struct of_device_id ingenic_nand_dt_match[] = {
+ { .compatible = "ingenic,jz4740-nand", .data = &jz4740_soc_info },
+ { .compatible = "ingenic,jz4725b-nand", .data = &jz4725b_soc_info },
+ { .compatible = "ingenic,jz4780-nand", .data = &jz4780_soc_info },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ingenic_nand_dt_match);
+
+static struct platform_driver ingenic_nand_driver = {
+ .probe = ingenic_nand_probe,
+ .remove = ingenic_nand_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = of_match_ptr(ingenic_nand_dt_match),
+ },
+};
+module_platform_driver(ingenic_nand_driver);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
+MODULE_DESCRIPTION("Ingenic JZ47xx NAND driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
new file mode 100644
index 000000000000..6c852eae09cf
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4725B BCH controller driver
+ *
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ *
+ * Based on jz4780_bch.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+#define BCH_BHCR 0x0
+#define BCH_BHCSR 0x4
+#define BCH_BHCCR 0x8
+#define BCH_BHCNT 0xc
+#define BCH_BHDR 0x10
+#define BCH_BHPAR0 0x14
+#define BCH_BHERR0 0x28
+#define BCH_BHINT 0x24
+#define BCH_BHINTES 0x3c
+#define BCH_BHINTEC 0x40
+#define BCH_BHINTE 0x38
+
+#define BCH_BHCR_ENCE BIT(3)
+#define BCH_BHCR_BSEL BIT(2)
+#define BCH_BHCR_INIT BIT(1)
+#define BCH_BHCR_BCHE BIT(0)
+
+#define BCH_BHCNT_DEC_COUNT_SHIFT 16
+#define BCH_BHCNT_DEC_COUNT_MASK (0x3ff << BCH_BHCNT_DEC_COUNT_SHIFT)
+#define BCH_BHCNT_ENC_COUNT_SHIFT 0
+#define BCH_BHCNT_ENC_COUNT_MASK (0x3ff << BCH_BHCNT_ENC_COUNT_SHIFT)
+
+#define BCH_BHERR_INDEX0_SHIFT 0
+#define BCH_BHERR_INDEX0_MASK (0x1fff << BCH_BHERR_INDEX0_SHIFT)
+#define BCH_BHERR_INDEX1_SHIFT 16
+#define BCH_BHERR_INDEX1_MASK (0x1fff << BCH_BHERR_INDEX1_SHIFT)
+
+#define BCH_BHINT_ERRC_SHIFT 28
+#define BCH_BHINT_ERRC_MASK (0xf << BCH_BHINT_ERRC_SHIFT)
+#define BCH_BHINT_TERRC_SHIFT 16
+#define BCH_BHINT_TERRC_MASK (0x7f << BCH_BHINT_TERRC_SHIFT)
+#define BCH_BHINT_ALL_0 BIT(5)
+#define BCH_BHINT_ALL_F BIT(4)
+#define BCH_BHINT_DECF BIT(3)
+#define BCH_BHINT_ENCF BIT(2)
+#define BCH_BHINT_UNCOR BIT(1)
+#define BCH_BHINT_ERR BIT(0)
+
+/* Timeout for BCH calculation/correction. */
+#define BCH_TIMEOUT_US 100000
+
+static inline void jz4725b_bch_config_set(struct ingenic_ecc *bch, u32 cfg)
+{
+ writel(cfg, bch->base + BCH_BHCSR);
+}
+
+static inline void jz4725b_bch_config_clear(struct ingenic_ecc *bch, u32 cfg)
+{
+ writel(cfg, bch->base + BCH_BHCCR);
+}
+
+static int jz4725b_bch_reset(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params, bool calc_ecc)
+{
+ u32 reg, max_value;
+
+ /* Clear interrupt status. */
+ writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+ /* Initialise and enable BCH. */
+ jz4725b_bch_config_clear(bch, 0x1f);
+ jz4725b_bch_config_set(bch, BCH_BHCR_BCHE);
+
+ if (params->strength == 8)
+ jz4725b_bch_config_set(bch, BCH_BHCR_BSEL);
+ else
+ jz4725b_bch_config_clear(bch, BCH_BHCR_BSEL);
+
+ if (calc_ecc) /* calculate ECC from data */
+ jz4725b_bch_config_set(bch, BCH_BHCR_ENCE);
+ else /* correct data from ECC */
+ jz4725b_bch_config_clear(bch, BCH_BHCR_ENCE);
+
+ jz4725b_bch_config_set(bch, BCH_BHCR_INIT);
+
+ max_value = BCH_BHCNT_ENC_COUNT_MASK >> BCH_BHCNT_ENC_COUNT_SHIFT;
+ if (params->size > max_value)
+ return -EINVAL;
+
+ max_value = BCH_BHCNT_DEC_COUNT_MASK >> BCH_BHCNT_DEC_COUNT_SHIFT;
+ if (params->size + params->bytes > max_value)
+ return -EINVAL;
+
+ /* Set up BCH count register. */
+ reg = params->size << BCH_BHCNT_ENC_COUNT_SHIFT;
+ reg |= (params->size + params->bytes) << BCH_BHCNT_DEC_COUNT_SHIFT;
+ writel(reg, bch->base + BCH_BHCNT);
+
+ return 0;
+}
+
+static void jz4725b_bch_disable(struct ingenic_ecc *bch)
+{
+ /* Clear interrupts */
+ writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+ /* Disable the hardware */
+ jz4725b_bch_config_clear(bch, BCH_BHCR_BCHE);
+}
+
+static void jz4725b_bch_write_data(struct ingenic_ecc *bch, const u8 *buf,
+ size_t size)
+{
+ while (size--)
+ writeb(*buf++, bch->base + BCH_BHDR);
+}
+
+static void jz4725b_bch_read_parity(struct ingenic_ecc *bch, u8 *buf,
+ size_t size)
+{
+ size_t size32 = size / sizeof(u32);
+ size_t size8 = size % sizeof(u32);
+ u32 *dest32;
+ u8 *dest8;
+ u32 val, offset = 0;
+
+ dest32 = (u32 *)buf;
+ while (size32--) {
+ *dest32++ = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
+ offset += sizeof(u32);
+ }
+
+ dest8 = (u8 *)dest32;
+ val = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
+ switch (size8) {
+ case 3:
+ dest8[2] = (val >> 16) & 0xff;
+ /* fall-through */
+ case 2:
+ dest8[1] = (val >> 8) & 0xff;
+ /* fall-through */
+ case 1:
+ dest8[0] = val & 0xff;
+ break;
+ }
+}
+
+static int jz4725b_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
+ u32 *status)
+{
+ u32 reg;
+ int ret;
+
+ /*
+ * While we could use interrupts here and sleep until the operation
+ * completes, the controller works fairly quickly (usually a few
+ * microseconds) and so the overhead of sleeping until we get an
+ * interrupt quite noticeably decreases performance.
+ */
+ ret = readl_relaxed_poll_timeout(bch->base + BCH_BHINT, reg,
+ reg & irq, 0, BCH_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ if (status)
+ *status = reg;
+
+ writel(reg, bch->base + BCH_BHINT);
+
+ return 0;
+}
+
+static int jz4725b_calculate(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code)
+{
+ int ret;
+
+ mutex_lock(&bch->lock);
+
+ ret = jz4725b_bch_reset(bch, params, true);
+ if (ret) {
+ dev_err(bch->dev, "Unable to init BCH with given parameters\n");
+ goto out_disable;
+ }
+
+ jz4725b_bch_write_data(bch, buf, params->size);
+
+ ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL);
+ if (ret) {
+ dev_err(bch->dev, "timed out while calculating ECC\n");
+ goto out_disable;
+ }
+
+ jz4725b_bch_read_parity(bch, ecc_code, params->bytes);
+
+out_disable:
+ jz4725b_bch_disable(bch);
+ mutex_unlock(&bch->lock);
+
+ return ret;
+}
+
+static int jz4725b_correct(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params,
+ u8 *buf, u8 *ecc_code)
+{
+ u32 reg, errors, bit;
+ unsigned int i;
+ int ret;
+
+ mutex_lock(&bch->lock);
+
+ ret = jz4725b_bch_reset(bch, params, false);
+ if (ret) {
+ dev_err(bch->dev, "Unable to init BCH with given parameters\n");
+ goto out;
+ }
+
+ jz4725b_bch_write_data(bch, buf, params->size);
+ jz4725b_bch_write_data(bch, ecc_code, params->bytes);
+
+ ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_DECF, &reg);
+ if (ret) {
+ dev_err(bch->dev, "timed out while correcting data\n");
+ goto out;
+ }
+
+ if (reg & (BCH_BHINT_ALL_F | BCH_BHINT_ALL_0)) {
+ /* Data and ECC is all 0xff or 0x00 - nothing to correct */
+ ret = 0;
+ goto out;
+ }
+
+ if (reg & BCH_BHINT_UNCOR) {
+ /* Uncorrectable ECC error */
+ ret = -EBADMSG;
+ goto out;
+ }
+
+ errors = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
+
+ /* Correct any detected errors. */
+ for (i = 0; i < errors; i++) {
+ if (i & 1) {
+ bit = (reg & BCH_BHERR_INDEX1_MASK) >> BCH_BHERR_INDEX1_SHIFT;
+ } else {
+ reg = readl(bch->base + BCH_BHERR0 + (i * 4));
+ bit = (reg & BCH_BHERR_INDEX0_MASK) >> BCH_BHERR_INDEX0_SHIFT;
+ }
+
+ buf[(bit >> 3)] ^= BIT(bit & 0x7);
+ }
+
+out:
+ jz4725b_bch_disable(bch);
+ mutex_unlock(&bch->lock);
+
+ return ret;
+}
+
+static const struct ingenic_ecc_ops jz4725b_bch_ops = {
+ .disable = jz4725b_bch_disable,
+ .calculate = jz4725b_calculate,
+ .correct = jz4725b_correct,
+};
+
+static const struct of_device_id jz4725b_bch_dt_match[] = {
+ { .compatible = "ingenic,jz4725b-bch", .data = &jz4725b_bch_ops },
+ {},
+};
+MODULE_DEVICE_TABLE(of, jz4725b_bch_dt_match);
+
+static struct platform_driver jz4725b_bch_driver = {
+ .probe = ingenic_ecc_probe,
+ .driver = {
+ .name = "jz4725b-bch",
+ .of_match_table = jz4725b_bch_dt_match,
+ },
+};
+module_platform_driver(jz4725b_bch_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4725B BCH controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c b/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c
new file mode 100644
index 000000000000..13fea645c7f0
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4740 ECC controller driver
+ *
+ * Copyright (c) 2019 Paul Cercueil <paul@crapouillou.net>
+ *
+ * based on jz4740-nand.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+#define JZ_REG_NAND_ECC_CTRL 0x00
+#define JZ_REG_NAND_DATA 0x04
+#define JZ_REG_NAND_PAR0 0x08
+#define JZ_REG_NAND_PAR1 0x0C
+#define JZ_REG_NAND_PAR2 0x10
+#define JZ_REG_NAND_IRQ_STAT 0x14
+#define JZ_REG_NAND_IRQ_CTRL 0x18
+#define JZ_REG_NAND_ERR(x) (0x1C + ((x) << 2))
+
+#define JZ_NAND_ECC_CTRL_PAR_READY BIT(4)
+#define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
+#define JZ_NAND_ECC_CTRL_RS BIT(2)
+#define JZ_NAND_ECC_CTRL_RESET BIT(1)
+#define JZ_NAND_ECC_CTRL_ENABLE BIT(0)
+
+#define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29))
+#define JZ_NAND_STATUS_PAD_FINISH BIT(4)
+#define JZ_NAND_STATUS_DEC_FINISH BIT(3)
+#define JZ_NAND_STATUS_ENC_FINISH BIT(2)
+#define JZ_NAND_STATUS_UNCOR_ERROR BIT(1)
+#define JZ_NAND_STATUS_ERROR BIT(0)
+
+static const uint8_t empty_block_ecc[] = {
+ 0xcd, 0x9d, 0x90, 0x58, 0xf4, 0x8b, 0xff, 0xb7, 0x6f
+};
+
+static void jz4740_ecc_reset(struct ingenic_ecc *ecc, bool calc_ecc)
+{
+ uint32_t reg;
+
+ /* Clear interrupt status */
+ writel(0, ecc->base + JZ_REG_NAND_IRQ_STAT);
+
+ /* Initialize and enable ECC hardware */
+ reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+ reg |= JZ_NAND_ECC_CTRL_RESET;
+ reg |= JZ_NAND_ECC_CTRL_ENABLE;
+ reg |= JZ_NAND_ECC_CTRL_RS;
+ if (calc_ecc) /* calculate ECC from data */
+ reg |= JZ_NAND_ECC_CTRL_ENCODING;
+ else /* correct data from ECC */
+ reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
+
+ writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static int jz4740_ecc_calculate(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code)
+{
+ uint32_t reg, status;
+ unsigned int timeout = 1000;
+ int i;
+
+ jz4740_ecc_reset(ecc, true);
+
+ do {
+ status = readl(ecc->base + JZ_REG_NAND_IRQ_STAT);
+ } while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+
+ reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+ writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+ for (i = 0; i < params->bytes; ++i)
+ ecc_code[i] = readb(ecc->base + JZ_REG_NAND_PAR0 + i);
+
+ /*
+ * If the written data is completely 0xff, we also want to write 0xff as
+ * ECC, otherwise we will get in trouble when doing subpage writes.
+ */
+ if (memcmp(ecc_code, empty_block_ecc, ARRAY_SIZE(empty_block_ecc)) == 0)
+ memset(ecc_code, 0xff, ARRAY_SIZE(empty_block_ecc));
+
+ return 0;
+}
+
+static void jz_nand_correct_data(uint8_t *buf, int index, int mask)
+{
+ int offset = index & 0x7;
+ uint16_t data;
+
+ index += (index >> 3);
+
+ data = buf[index];
+ data |= buf[index + 1] << 8;
+
+ mask ^= (data >> offset) & 0x1ff;
+ data &= ~(0x1ff << offset);
+ data |= (mask << offset);
+
+ buf[index] = data & 0xff;
+ buf[index + 1] = (data >> 8) & 0xff;
+}
+
+static int jz4740_ecc_correct(struct ingenic_ecc *ecc,
+ struct ingenic_ecc_params *params,
+ u8 *buf, u8 *ecc_code)
+{
+ int i, error_count, index;
+ uint32_t reg, status, error;
+ unsigned int timeout = 1000;
+
+ jz4740_ecc_reset(ecc, false);
+
+ for (i = 0; i < params->bytes; ++i)
+ writeb(ecc_code[i], ecc->base + JZ_REG_NAND_PAR0 + i);
+
+ reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+ reg |= JZ_NAND_ECC_CTRL_PAR_READY;
+ writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+ do {
+ status = readl(ecc->base + JZ_REG_NAND_IRQ_STAT);
+ } while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+
+ reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+ writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+ if (status & JZ_NAND_STATUS_ERROR) {
+ if (status & JZ_NAND_STATUS_UNCOR_ERROR)
+ return -EBADMSG;
+
+ error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
+
+ for (i = 0; i < error_count; ++i) {
+ error = readl(ecc->base + JZ_REG_NAND_ERR(i));
+ index = ((error >> 16) & 0x1ff) - 1;
+ if (index >= 0 && index < params->size)
+ jz_nand_correct_data(buf, index, error & 0x1ff);
+ }
+
+ return error_count;
+ }
+
+ return 0;
+}
+
+static void jz4740_ecc_disable(struct ingenic_ecc *ecc)
+{
+ u32 reg;
+
+ writel(0, ecc->base + JZ_REG_NAND_IRQ_STAT);
+ reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+ writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static const struct ingenic_ecc_ops jz4740_ecc_ops = {
+ .disable = jz4740_ecc_disable,
+ .calculate = jz4740_ecc_calculate,
+ .correct = jz4740_ecc_correct,
+};
+
+static const struct of_device_id jz4740_ecc_dt_match[] = {
+ { .compatible = "ingenic,jz4740-ecc", .data = &jz4740_ecc_ops },
+ {},
+};
+MODULE_DEVICE_TABLE(of, jz4740_ecc_dt_match);
+
+static struct platform_driver jz4740_ecc_driver = {
+ .probe = ingenic_ecc_probe,
+ .driver = {
+ .name = "jz4740-ecc",
+ .of_match_table = jz4740_ecc_dt_match,
+ },
+};
+module_platform_driver(jz4740_ecc_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4740 ECC controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/jz4740_nand.c b/drivers/mtd/nand/raw/ingenic/jz4740_nand.c
index 9526d5b23c80..f759f1672855 100644
--- a/drivers/mtd/nand/raw/jz4740_nand.c
+++ b/drivers/mtd/nand/raw/ingenic/jz4740_nand.c
@@ -313,8 +313,11 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
uint32_t ctrl;
struct nand_chip *chip = &nand->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
u8 id[2];
+ memorg = nanddev_get_memorg(&chip->base);
+
/* Request I/O resource. */
sprintf(res_name, "bank%d", bank);
ret = jz_nand_ioremap_resource(pdev, res_name,
@@ -351,8 +354,8 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
}
/* Update size of the MTD. */
- chip->numchips++;
- mtd->size += chip->chipsize;
+ memorg->ntargets++;
+ mtd->size += nanddev_target_size(&chip->base);
}
dev_info(&pdev->dev, "Found chip %zu on bank %i\n", chipnr, bank);
diff --git a/drivers/mtd/nand/raw/jz4780_bch.c b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
index c5f74ed85862..079266a0d6cf 100644
--- a/drivers/mtd/nand/raw/jz4780_bch.c
+++ b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
@@ -1,28 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * JZ4780 BCH controller
+ * JZ4780 BCH controller driver
*
* Copyright (c) 2015 Imagination Technologies
* Author: Alex Smith <alex.smith@imgtec.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include "jz4780_bch.h"
+#include "ingenic_ecc.h"
#define BCH_BHCR 0x0
#define BCH_BHCCR 0x8
@@ -65,15 +59,8 @@
/* Timeout for BCH calculation/correction. */
#define BCH_TIMEOUT_US 100000
-struct jz4780_bch {
- struct device *dev;
- void __iomem *base;
- struct clk *clk;
- struct mutex lock;
-};
-
-static void jz4780_bch_init(struct jz4780_bch *bch,
- struct jz4780_bch_params *params, bool encode)
+static void jz4780_bch_reset(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params, bool encode)
{
u32 reg;
@@ -93,13 +80,13 @@ static void jz4780_bch_init(struct jz4780_bch *bch,
writel(reg, bch->base + BCH_BHCR);
}
-static void jz4780_bch_disable(struct jz4780_bch *bch)
+static void jz4780_bch_disable(struct ingenic_ecc *bch)
{
writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR);
}
-static void jz4780_bch_write_data(struct jz4780_bch *bch, const void *buf,
+static void jz4780_bch_write_data(struct ingenic_ecc *bch, const void *buf,
size_t size)
{
size_t size32 = size / sizeof(u32);
@@ -116,7 +103,7 @@ static void jz4780_bch_write_data(struct jz4780_bch *bch, const void *buf,
writeb(*src8++, bch->base + BCH_BHDR);
}
-static void jz4780_bch_read_parity(struct jz4780_bch *bch, void *buf,
+static void jz4780_bch_read_parity(struct ingenic_ecc *bch, void *buf,
size_t size)
{
size_t size32 = size / sizeof(u32);
@@ -146,7 +133,7 @@ static void jz4780_bch_read_parity(struct jz4780_bch *bch, void *buf,
}
}
-static bool jz4780_bch_wait_complete(struct jz4780_bch *bch, unsigned int irq,
+static bool jz4780_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
u32 *status)
{
u32 reg;
@@ -170,23 +157,15 @@ static bool jz4780_bch_wait_complete(struct jz4780_bch *bch, unsigned int irq,
return true;
}
-/**
- * jz4780_bch_calculate() - calculate ECC for a data buffer
- * @bch: BCH device.
- * @params: BCH parameters.
- * @buf: input buffer with raw data.
- * @ecc_code: output buffer with ECC.
- *
- * Return: 0 on success, -ETIMEDOUT if timed out while waiting for BCH
- * controller.
- */
-int jz4780_bch_calculate(struct jz4780_bch *bch, struct jz4780_bch_params *params,
- const u8 *buf, u8 *ecc_code)
+static int jz4780_calculate(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params,
+ const u8 *buf, u8 *ecc_code)
{
int ret = 0;
mutex_lock(&bch->lock);
- jz4780_bch_init(bch, params, true);
+
+ jz4780_bch_reset(bch, params, true);
jz4780_bch_write_data(bch, buf, params->size);
if (jz4780_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL)) {
@@ -200,30 +179,17 @@ int jz4780_bch_calculate(struct jz4780_bch *bch, struct jz4780_bch_params *param
mutex_unlock(&bch->lock);
return ret;
}
-EXPORT_SYMBOL(jz4780_bch_calculate);
-
-/**
- * jz4780_bch_correct() - detect and correct bit errors
- * @bch: BCH device.
- * @params: BCH parameters.
- * @buf: raw data read from the chip.
- * @ecc_code: ECC read from the chip.
- *
- * Given the raw data and the ECC read from the NAND device, detects and
- * corrects errors in the data.
- *
- * Return: the number of bit errors corrected, -EBADMSG if there are too many
- * errors to correct or -ETIMEDOUT if we timed out waiting for the controller.
- */
-int jz4780_bch_correct(struct jz4780_bch *bch, struct jz4780_bch_params *params,
- u8 *buf, u8 *ecc_code)
+
+static int jz4780_correct(struct ingenic_ecc *bch,
+ struct ingenic_ecc_params *params,
+ u8 *buf, u8 *ecc_code)
{
u32 reg, mask, index;
int i, ret, count;
mutex_lock(&bch->lock);
- jz4780_bch_init(bch, params, false);
+ jz4780_bch_reset(bch, params, false);
jz4780_bch_write_data(bch, buf, params->size);
jz4780_bch_write_data(bch, ecc_code, params->bytes);
@@ -262,110 +228,30 @@ out:
mutex_unlock(&bch->lock);
return ret;
}
-EXPORT_SYMBOL(jz4780_bch_correct);
-
-/**
- * jz4780_bch_get() - get the BCH controller device
- * @np: BCH device tree node.
- *
- * Gets the BCH controller device from the specified device tree node. The
- * device must be released with jz4780_bch_release() when it is no longer being
- * used.
- *
- * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
- * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
- */
-static struct jz4780_bch *jz4780_bch_get(struct device_node *np)
-{
- struct platform_device *pdev;
- struct jz4780_bch *bch;
-
- pdev = of_find_device_by_node(np);
- if (!pdev)
- return ERR_PTR(-EPROBE_DEFER);
-
- bch = platform_get_drvdata(pdev);
- if (!bch) {
- put_device(&pdev->dev);
- return ERR_PTR(-EPROBE_DEFER);
- }
-
- clk_prepare_enable(bch->clk);
-
- return bch;
-}
-
-/**
- * of_jz4780_bch_get() - get the BCH controller from a DT node
- * @of_node: the node that contains a bch-controller property.
- *
- * Get the bch-controller property from the given device tree
- * node and pass it to jz4780_bch_get to do the work.
- *
- * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
- * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
- */
-struct jz4780_bch *of_jz4780_bch_get(struct device_node *of_node)
-{
- struct jz4780_bch *bch = NULL;
- struct device_node *np;
-
- np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
-
- if (np) {
- bch = jz4780_bch_get(np);
- of_node_put(np);
- }
- return bch;
-}
-EXPORT_SYMBOL(of_jz4780_bch_get);
-
-/**
- * jz4780_bch_release() - release the BCH controller device
- * @bch: BCH device.
- */
-void jz4780_bch_release(struct jz4780_bch *bch)
-{
- clk_disable_unprepare(bch->clk);
- put_device(bch->dev);
-}
-EXPORT_SYMBOL(jz4780_bch_release);
static int jz4780_bch_probe(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- struct jz4780_bch *bch;
- struct resource *res;
-
- bch = devm_kzalloc(dev, sizeof(*bch), GFP_KERNEL);
- if (!bch)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- bch->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(bch->base))
- return PTR_ERR(bch->base);
-
- jz4780_bch_disable(bch);
+ struct ingenic_ecc *bch;
+ int ret;
- bch->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(bch->clk)) {
- dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(bch->clk));
- return PTR_ERR(bch->clk);
- }
+ ret = ingenic_ecc_probe(pdev);
+ if (ret)
+ return ret;
+ bch = platform_get_drvdata(pdev);
clk_set_rate(bch->clk, BCH_CLK_RATE);
- mutex_init(&bch->lock);
-
- bch->dev = dev;
- platform_set_drvdata(pdev, bch);
-
return 0;
}
+static const struct ingenic_ecc_ops jz4780_bch_ops = {
+ .disable = jz4780_bch_disable,
+ .calculate = jz4780_calculate,
+ .correct = jz4780_correct,
+};
+
static const struct of_device_id jz4780_bch_dt_match[] = {
- { .compatible = "ingenic,jz4780-bch" },
+ { .compatible = "ingenic,jz4780-bch", .data = &jz4780_bch_ops },
{},
};
MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match);
diff --git a/drivers/mtd/nand/raw/internals.h b/drivers/mtd/nand/raw/internals.h
index fbf6ca015cd7..cba6fe7dd8c4 100644
--- a/drivers/mtd/nand/raw/internals.h
+++ b/drivers/mtd/nand/raw/internals.h
@@ -76,6 +76,7 @@ extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops;
/* Core functions */
const struct nand_manufacturer *nand_get_manufacturer(u8 id);
+int nand_bbm_get_next_page(struct nand_chip *chip, int page);
int nand_markbad_bbm(struct nand_chip *chip, loff_t ofs);
int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
int allowbbt);
@@ -110,7 +111,7 @@ static inline int nand_exec_op(struct nand_chip *chip,
if (!nand_has_exec_op(chip))
return -ENOTSUPP;
- if (WARN_ON(op->cs >= chip->numchips))
+ if (WARN_ON(op->cs >= nanddev_ntargets(&chip->base)))
return -EINVAL;
return chip->controller->ops->exec_op(chip, op, false);
diff --git a/drivers/mtd/nand/raw/jz4780_bch.h b/drivers/mtd/nand/raw/jz4780_bch.h
deleted file mode 100644
index bf4718088a3a..000000000000
--- a/drivers/mtd/nand/raw/jz4780_bch.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * JZ4780 BCH controller
- *
- * Copyright (c) 2015 Imagination Technologies
- * Author: Alex Smith <alex.smith@imgtec.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __DRIVERS_MTD_NAND_JZ4780_BCH_H__
-#define __DRIVERS_MTD_NAND_JZ4780_BCH_H__
-
-#include <linux/types.h>
-
-struct device;
-struct device_node;
-struct jz4780_bch;
-
-/**
- * struct jz4780_bch_params - BCH parameters
- * @size: data bytes per ECC step.
- * @bytes: ECC bytes per step.
- * @strength: number of correctable bits per ECC step.
- */
-struct jz4780_bch_params {
- int size;
- int bytes;
- int strength;
-};
-
-int jz4780_bch_calculate(struct jz4780_bch *bch,
- struct jz4780_bch_params *params,
- const u8 *buf, u8 *ecc_code);
-int jz4780_bch_correct(struct jz4780_bch *bch,
- struct jz4780_bch_params *params, u8 *buf,
- u8 *ecc_code);
-
-void jz4780_bch_release(struct jz4780_bch *bch);
-struct jz4780_bch *of_jz4780_bch_get(struct device_node *np);
-
-#endif /* __DRIVERS_MTD_NAND_JZ4780_BCH_H__ */
diff --git a/drivers/mtd/nand/raw/jz4780_nand.c b/drivers/mtd/nand/raw/jz4780_nand.c
deleted file mode 100644
index 22e58975f0d5..000000000000
--- a/drivers/mtd/nand/raw/jz4780_nand.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * JZ4780 NAND driver
- *
- * Copyright (c) 2015 Imagination Technologies
- * Author: Alex Smith <alex.smith@imgtec.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/gpio/consumer.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/jz4780-nemc.h>
-
-#include "jz4780_bch.h"
-
-#define DRV_NAME "jz4780-nand"
-
-#define OFFSET_DATA 0x00000000
-#define OFFSET_CMD 0x00400000
-#define OFFSET_ADDR 0x00800000
-
-/* Command delay when there is no R/B pin. */
-#define RB_DELAY_US 100
-
-struct jz4780_nand_cs {
- unsigned int bank;
- void __iomem *base;
-};
-
-struct jz4780_nand_controller {
- struct device *dev;
- struct jz4780_bch *bch;
- struct nand_controller controller;
- unsigned int num_banks;
- struct list_head chips;
- int selected;
- struct jz4780_nand_cs cs[];
-};
-
-struct jz4780_nand_chip {
- struct nand_chip chip;
- struct list_head chip_list;
-
- struct gpio_desc *busy_gpio;
- struct gpio_desc *wp_gpio;
- unsigned int reading: 1;
-};
-
-static inline struct jz4780_nand_chip *to_jz4780_nand_chip(struct mtd_info *mtd)
-{
- return container_of(mtd_to_nand(mtd), struct jz4780_nand_chip, chip);
-}
-
-static inline struct jz4780_nand_controller
-*to_jz4780_nand_controller(struct nand_controller *ctrl)
-{
- return container_of(ctrl, struct jz4780_nand_controller, controller);
-}
-
-static void jz4780_nand_select_chip(struct nand_chip *chip, int chipnr)
-{
- struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
- struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
- struct jz4780_nand_cs *cs;
-
- /* Ensure the currently selected chip is deasserted. */
- if (chipnr == -1 && nfc->selected >= 0) {
- cs = &nfc->cs[nfc->selected];
- jz4780_nemc_assert(nfc->dev, cs->bank, false);
- }
-
- nfc->selected = chipnr;
-}
-
-static void jz4780_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
- unsigned int ctrl)
-{
- struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
- struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
- struct jz4780_nand_cs *cs;
-
- if (WARN_ON(nfc->selected < 0))
- return;
-
- cs = &nfc->cs[nfc->selected];
-
- jz4780_nemc_assert(nfc->dev, cs->bank, ctrl & NAND_NCE);
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- if (ctrl & NAND_ALE)
- writeb(cmd, cs->base + OFFSET_ADDR);
- else if (ctrl & NAND_CLE)
- writeb(cmd, cs->base + OFFSET_CMD);
-}
-
-static int jz4780_nand_dev_ready(struct nand_chip *chip)
-{
- struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
-
- return !gpiod_get_value_cansleep(nand->busy_gpio);
-}
-
-static void jz4780_nand_ecc_hwctl(struct nand_chip *chip, int mode)
-{
- struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
-
- nand->reading = (mode == NAND_ECC_READ);
-}
-
-static int jz4780_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat,
- u8 *ecc_code)
-{
- struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
- struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
- struct jz4780_bch_params params;
-
- /*
- * Don't need to generate the ECC when reading, BCH does it for us as
- * part of decoding/correction.
- */
- if (nand->reading)
- return 0;
-
- params.size = nand->chip.ecc.size;
- params.bytes = nand->chip.ecc.bytes;
- params.strength = nand->chip.ecc.strength;
-
- return jz4780_bch_calculate(nfc->bch, &params, dat, ecc_code);
-}
-
-static int jz4780_nand_ecc_correct(struct nand_chip *chip, u8 *dat,
- u8 *read_ecc, u8 *calc_ecc)
-{
- struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
- struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
- struct jz4780_bch_params params;
-
- params.size = nand->chip.ecc.size;
- params.bytes = nand->chip.ecc.bytes;
- params.strength = nand->chip.ecc.strength;
-
- return jz4780_bch_correct(nfc->bch, &params, dat, read_ecc);
-}
-
-static int jz4780_nand_attach_chip(struct nand_chip *chip)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
- int eccbytes;
-
- chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
- (chip->ecc.strength / 8);
-
- switch (chip->ecc.mode) {
- case NAND_ECC_HW:
- if (!nfc->bch) {
- dev_err(nfc->dev,
- "HW BCH selected, but BCH controller not found\n");
- return -ENODEV;
- }
-
- chip->ecc.hwctl = jz4780_nand_ecc_hwctl;
- chip->ecc.calculate = jz4780_nand_ecc_calculate;
- chip->ecc.correct = jz4780_nand_ecc_correct;
- /* fall through */
- case NAND_ECC_SOFT:
- dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
- (nfc->bch) ? "hardware BCH" : "software ECC",
- chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
- break;
- case NAND_ECC_NONE:
- dev_info(nfc->dev, "not using ECC\n");
- break;
- default:
- dev_err(nfc->dev, "ECC mode %d not supported\n",
- chip->ecc.mode);
- return -EINVAL;
- }
-
- /* The NAND core will generate the ECC layout for SW ECC */
- if (chip->ecc.mode != NAND_ECC_HW)
- return 0;
-
- /* Generate ECC layout. ECC codes are right aligned in the OOB area. */
- eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
-
- if (eccbytes > mtd->oobsize - 2) {
- dev_err(nfc->dev,
- "invalid ECC config: required %d ECC bytes, but only %d are available",
- eccbytes, mtd->oobsize - 2);
- return -EINVAL;
- }
-
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
-
- return 0;
-}
-
-static const struct nand_controller_ops jz4780_nand_controller_ops = {
- .attach_chip = jz4780_nand_attach_chip,
-};
-
-static int jz4780_nand_init_chip(struct platform_device *pdev,
- struct jz4780_nand_controller *nfc,
- struct device_node *np,
- unsigned int chipnr)
-{
- struct device *dev = &pdev->dev;
- struct jz4780_nand_chip *nand;
- struct jz4780_nand_cs *cs;
- struct resource *res;
- struct nand_chip *chip;
- struct mtd_info *mtd;
- const __be32 *reg;
- int ret = 0;
-
- cs = &nfc->cs[chipnr];
-
- reg = of_get_property(np, "reg", NULL);
- if (!reg)
- return -EINVAL;
-
- cs->bank = be32_to_cpu(*reg);
-
- jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr);
- cs->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(cs->base))
- return PTR_ERR(cs->base);
-
- nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
- if (!nand)
- return -ENOMEM;
-
- nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
-
- if (IS_ERR(nand->busy_gpio)) {
- ret = PTR_ERR(nand->busy_gpio);
- dev_err(dev, "failed to request busy GPIO: %d\n", ret);
- return ret;
- } else if (nand->busy_gpio) {
- nand->chip.legacy.dev_ready = jz4780_nand_dev_ready;
- }
-
- nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
-
- if (IS_ERR(nand->wp_gpio)) {
- ret = PTR_ERR(nand->wp_gpio);
- dev_err(dev, "failed to request WP GPIO: %d\n", ret);
- return ret;
- }
-
- chip = &nand->chip;
- mtd = nand_to_mtd(chip);
- mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
- cs->bank);
- if (!mtd->name)
- return -ENOMEM;
- mtd->dev.parent = dev;
-
- chip->legacy.IO_ADDR_R = cs->base + OFFSET_DATA;
- chip->legacy.IO_ADDR_W = cs->base + OFFSET_DATA;
- chip->legacy.chip_delay = RB_DELAY_US;
- chip->options = NAND_NO_SUBPAGE_WRITE;
- chip->legacy.select_chip = jz4780_nand_select_chip;
- chip->legacy.cmd_ctrl = jz4780_nand_cmd_ctrl;
- chip->ecc.mode = NAND_ECC_HW;
- chip->controller = &nfc->controller;
- nand_set_flash_node(chip, np);
-
- chip->controller->ops = &jz4780_nand_controller_ops;
- ret = nand_scan(chip, 1);
- if (ret)
- return ret;
-
- ret = mtd_device_register(mtd, NULL, 0);
- if (ret) {
- nand_release(chip);
- return ret;
- }
-
- list_add_tail(&nand->chip_list, &nfc->chips);
-
- return 0;
-}
-
-static void jz4780_nand_cleanup_chips(struct jz4780_nand_controller *nfc)
-{
- struct jz4780_nand_chip *chip;
-
- while (!list_empty(&nfc->chips)) {
- chip = list_first_entry(&nfc->chips, struct jz4780_nand_chip, chip_list);
- nand_release(&chip->chip);
- list_del(&chip->chip_list);
- }
-}
-
-static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc,
- struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device_node *np;
- int i = 0;
- int ret;
- int num_chips = of_get_child_count(dev->of_node);
-
- if (num_chips > nfc->num_banks) {
- dev_err(dev, "found %d chips but only %d banks\n", num_chips, nfc->num_banks);
- return -EINVAL;
- }
-
- for_each_child_of_node(dev->of_node, np) {
- ret = jz4780_nand_init_chip(pdev, nfc, np, i);
- if (ret) {
- jz4780_nand_cleanup_chips(nfc);
- return ret;
- }
-
- i++;
- }
-
- return 0;
-}
-
-static int jz4780_nand_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- unsigned int num_banks;
- struct jz4780_nand_controller *nfc;
- int ret;
-
- num_banks = jz4780_nemc_num_banks(dev);
- if (num_banks == 0) {
- dev_err(dev, "no banks found\n");
- return -ENODEV;
- }
-
- nfc = devm_kzalloc(dev, struct_size(nfc, cs, num_banks), GFP_KERNEL);
- if (!nfc)
- return -ENOMEM;
-
- /*
- * Check for BCH HW before we call nand_scan_ident, to prevent us from
- * having to call it again if the BCH driver returns -EPROBE_DEFER.
- */
- nfc->bch = of_jz4780_bch_get(dev->of_node);
- if (IS_ERR(nfc->bch))
- return PTR_ERR(nfc->bch);
-
- nfc->dev = dev;
- nfc->num_banks = num_banks;
-
- nand_controller_init(&nfc->controller);
- INIT_LIST_HEAD(&nfc->chips);
-
- ret = jz4780_nand_init_chips(nfc, pdev);
- if (ret) {
- if (nfc->bch)
- jz4780_bch_release(nfc->bch);
- return ret;
- }
-
- platform_set_drvdata(pdev, nfc);
- return 0;
-}
-
-static int jz4780_nand_remove(struct platform_device *pdev)
-{
- struct jz4780_nand_controller *nfc = platform_get_drvdata(pdev);
-
- if (nfc->bch)
- jz4780_bch_release(nfc->bch);
-
- jz4780_nand_cleanup_chips(nfc);
-
- return 0;
-}
-
-static const struct of_device_id jz4780_nand_dt_match[] = {
- { .compatible = "ingenic,jz4780-nand" },
- {},
-};
-MODULE_DEVICE_TABLE(of, jz4780_nand_dt_match);
-
-static struct platform_driver jz4780_nand_driver = {
- .probe = jz4780_nand_probe,
- .remove = jz4780_nand_remove,
- .driver = {
- .name = DRV_NAME,
- .of_match_table = of_match_ptr(jz4780_nand_dt_match),
- },
-};
-module_platform_driver(jz4780_nand_driver);
-
-MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
-MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
-MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index d984538980e2..fc49e13d81ec 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -1083,12 +1083,11 @@ static int marvell_nfc_hw_ecc_hmg_read_page(struct nand_chip *chip, u8 *buf,
*/
static int marvell_nfc_hw_ecc_hmg_read_oob_raw(struct nand_chip *chip, int page)
{
- /* Invalidate page cache */
- chip->pagebuf = -1;
+ u8 *buf = nand_get_data_buf(chip);
marvell_nfc_select_target(chip, chip->cur_cs);
- return marvell_nfc_hw_ecc_hmg_do_read_page(chip, chip->data_buf,
- chip->oob_poi, true, page);
+ return marvell_nfc_hw_ecc_hmg_do_read_page(chip, buf, chip->oob_poi,
+ true, page);
}
/* Hamming write helpers */
@@ -1179,15 +1178,13 @@ static int marvell_nfc_hw_ecc_hmg_write_oob_raw(struct nand_chip *chip,
int page)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ u8 *buf = nand_get_data_buf(chip);
- /* Invalidate page cache */
- chip->pagebuf = -1;
-
- memset(chip->data_buf, 0xFF, mtd->writesize);
+ memset(buf, 0xFF, mtd->writesize);
marvell_nfc_select_target(chip, chip->cur_cs);
- return marvell_nfc_hw_ecc_hmg_do_write_page(chip, chip->data_buf,
- chip->oob_poi, true, page);
+ return marvell_nfc_hw_ecc_hmg_do_write_page(chip, buf, chip->oob_poi,
+ true, page);
}
/* BCH read helpers */
@@ -1434,18 +1431,16 @@ static int marvell_nfc_hw_ecc_bch_read_page(struct nand_chip *chip,
static int marvell_nfc_hw_ecc_bch_read_oob_raw(struct nand_chip *chip, int page)
{
- /* Invalidate page cache */
- chip->pagebuf = -1;
+ u8 *buf = nand_get_data_buf(chip);
- return chip->ecc.read_page_raw(chip, chip->data_buf, true, page);
+ return chip->ecc.read_page_raw(chip, buf, true, page);
}
static int marvell_nfc_hw_ecc_bch_read_oob(struct nand_chip *chip, int page)
{
- /* Invalidate page cache */
- chip->pagebuf = -1;
+ u8 *buf = nand_get_data_buf(chip);
- return chip->ecc.read_page(chip, chip->data_buf, true, page);
+ return chip->ecc.read_page(chip, buf, true, page);
}
/* BCH write helpers */
@@ -1619,25 +1614,21 @@ static int marvell_nfc_hw_ecc_bch_write_oob_raw(struct nand_chip *chip,
int page)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ u8 *buf = nand_get_data_buf(chip);
- /* Invalidate page cache */
- chip->pagebuf = -1;
-
- memset(chip->data_buf, 0xFF, mtd->writesize);
+ memset(buf, 0xFF, mtd->writesize);
- return chip->ecc.write_page_raw(chip, chip->data_buf, true, page);
+ return chip->ecc.write_page_raw(chip, buf, true, page);
}
static int marvell_nfc_hw_ecc_bch_write_oob(struct nand_chip *chip, int page)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ u8 *buf = nand_get_data_buf(chip);
- /* Invalidate page cache */
- chip->pagebuf = -1;
-
- memset(chip->data_buf, 0xFF, mtd->writesize);
+ memset(buf, 0xFF, mtd->writesize);
- return chip->ecc.write_page(chip, chip->data_buf, true, page);
+ return chip->ecc.write_page(chip, buf, true, page);
}
/* NAND framework ->exec_op() hooks and related helpers */
@@ -2257,9 +2248,9 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
int ret;
if (ecc->mode != NAND_ECC_NONE && (!ecc->size || !ecc->strength)) {
- if (chip->ecc_step_ds && chip->ecc_strength_ds) {
- ecc->size = chip->ecc_step_ds;
- ecc->strength = chip->ecc_strength_ds;
+ if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
+ ecc->size = chip->base.eccreq.step_size;
+ ecc->strength = chip->base.eccreq.strength;
} else {
dev_info(nfc->dev,
"No minimum ECC strength, using 1b/512B\n");
@@ -2989,7 +2980,7 @@ static int __maybe_unused marvell_nfc_resume(struct device *dev)
/*
* Reset nfc->selected_chip so the next command will cause the timing
- * registers to be restored in marvell_nfc_select_chip().
+ * registers to be restored in marvell_nfc_select_target().
*/
nfc->selected_chip = NULL;
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 3e8aa71407b5..ea57ddcec41e 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
cfg |= NFC_RB_IRQ_EN;
writel(cfg, nfc->reg_base + NFC_REG_CFG);
- init_completion(&nfc->completion);
+ reinit_completion(&nfc->completion);
/* use the max erase time as the maximum clock for waiting R/B */
cmd = NFC_CMD_RB | NFC_CMD_RB_INT
@@ -470,15 +470,15 @@ static int meson_nfc_ecc_correct(struct nand_chip *nand, u32 *bitflips,
return ret;
}
-static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, u8 *databuf,
- int datalen, u8 *infobuf, int infolen,
+static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
+ int datalen, void *infobuf, int infolen,
enum dma_data_direction dir)
{
struct meson_nfc *nfc = nand_get_controller_data(nand);
u32 cmd;
int ret = 0;
- nfc->daddr = dma_map_single(nfc->dev, (void *)databuf, datalen, dir);
+ nfc->daddr = dma_map_single(nfc->dev, databuf, datalen, dir);
ret = dma_mapping_error(nfc->dev, nfc->daddr);
if (ret) {
dev_err(nfc->dev, "DMA mapping error\n");
@@ -528,10 +528,13 @@ static int meson_nfc_read_buf(struct nand_chip *nand, u8 *buf, int len)
u8 *info;
info = kzalloc(PER_INFO_BYTE, GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
ret = meson_nfc_dma_buffer_setup(nand, buf, len, info,
PER_INFO_BYTE, DMA_FROM_DEVICE);
if (ret)
- return ret;
+ goto out;
cmd = NFC_CMD_N2M | (len & GENMASK(5, 0));
writel(cmd, nfc->reg_base + NFC_REG_CMD);
@@ -539,6 +542,8 @@ static int meson_nfc_read_buf(struct nand_chip *nand, u8 *buf, int len)
meson_nfc_drain_cmd(nfc);
meson_nfc_wait_cmd_finish(nfc, 1000);
meson_nfc_dma_buffer_release(nand, len, PER_INFO_BYTE, DMA_FROM_DEVICE);
+
+out:
kfree(info);
return ret;
@@ -640,7 +645,7 @@ static int meson_nfc_write_page_sub(struct nand_chip *nand,
return ret;
ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
- data_len, (u8 *)meson_chip->info_buf,
+ data_len, meson_chip->info_buf,
info_len, DMA_TO_DEVICE);
if (ret)
return ret;
@@ -724,7 +729,7 @@ static int meson_nfc_read_page_sub(struct nand_chip *nand,
return ret;
ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
- data_len, (u8 *)meson_chip->info_buf,
+ data_len, meson_chip->info_buf,
info_len, DMA_FROM_DEVICE);
if (ret)
return ret;
@@ -1183,6 +1188,8 @@ static int meson_nand_attach_chip(struct nand_chip *nand)
return -EINVAL;
}
+ mtd_set_ooblayout(mtd, &meson_ooblayout_ops);
+
ret = meson_nand_bch_mode(nand);
if (ret)
return -EINVAL;
@@ -1226,17 +1233,13 @@ meson_nfc_nand_chip_init(struct device *dev,
int ret, i;
u32 tmp, nsels;
- if (!of_get_property(np, "reg", &nsels))
- return -EINVAL;
-
- nsels /= sizeof(u32);
+ nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
if (!nsels || nsels > MAX_CE_NUM) {
dev_err(dev, "invalid register property size\n");
return -EINVAL;
}
- meson_chip = devm_kzalloc(dev,
- sizeof(*meson_chip) + (nsels * sizeof(u8)),
+ meson_chip = devm_kzalloc(dev, struct_size(meson_chip, sels, nsels),
GFP_KERNEL);
if (!meson_chip)
return -ENOMEM;
@@ -1377,6 +1380,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
nand_controller_init(&nfc->controller);
INIT_LIST_HEAD(&nfc->chips);
+ init_completion(&nfc->completion);
nfc->dev = dev;
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index 2c0e09187773..b17619f30b1b 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1197,8 +1197,8 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
/* if optional dt settings not present */
if (!nand->ecc.size || !nand->ecc.strength) {
/* use datasheet requirements */
- nand->ecc.strength = nand->ecc_strength_ds;
- nand->ecc.size = nand->ecc_step_ds;
+ nand->ecc.strength = nand->base.eccreq.strength;
+ nand->ecc.size = nand->base.eccreq.step_size;
/*
* align eccstrength and eccsize
diff --git a/drivers/mtd/nand/raw/nand_amd.c b/drivers/mtd/nand/raw/nand_amd.c
index 890c5b43e03c..6217555c19a6 100644
--- a/drivers/mtd/nand/raw/nand_amd.c
+++ b/drivers/mtd/nand/raw/nand_amd.c
@@ -20,6 +20,9 @@
static void amd_nand_decode_id(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
+
+ memorg = nanddev_get_memorg(&chip->base);
nand_decode_ext_id(chip);
@@ -31,16 +34,24 @@ static void amd_nand_decode_id(struct nand_chip *chip)
*/
if (chip->id.data[4] != 0x00 && chip->id.data[5] == 0x00 &&
chip->id.data[6] == 0x00 && chip->id.data[7] == 0x00 &&
- mtd->writesize == 512) {
- mtd->erasesize = 128 * 1024;
- mtd->erasesize <<= ((chip->id.data[3] & 0x03) << 1);
+ memorg->pagesize == 512) {
+ memorg->pages_per_eraseblock = 256;
+ memorg->pages_per_eraseblock <<= ((chip->id.data[3] & 0x03) << 1);
+ mtd->erasesize = memorg->pages_per_eraseblock *
+ memorg->pagesize;
}
}
static int amd_nand_init(struct nand_chip *chip)
{
if (nand_is_slc(chip))
- chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+ /*
+ * According to the datasheet of some Cypress SLC NANDs,
+ * the bad block markers can be in the first, second or last
+ * page of a block. So let's check all three locations.
+ */
+ chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE |
+ NAND_BBM_LASTPAGE;
return 0;
}
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index ddd396e93e32..2cf71060d6f8 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -240,10 +240,10 @@ static int check_offs_len(struct nand_chip *chip, loff_t ofs, uint64_t len)
void nand_select_target(struct nand_chip *chip, unsigned int cs)
{
/*
- * cs should always lie between 0 and chip->numchips, when that's not
- * the case it's a bug and the caller should be fixed.
+ * cs should always lie between 0 and nanddev_ntargets(), when that's
+ * not the case it's a bug and the caller should be fixed.
*/
- if (WARN_ON(cs > chip->numchips))
+ if (WARN_ON(cs > nanddev_ntargets(&chip->base)))
return;
chip->cur_cs = cs;
@@ -283,6 +283,31 @@ static void nand_release_device(struct nand_chip *chip)
}
/**
+ * nand_bbm_get_next_page - Get the next page for bad block markers
+ * @chip: NAND chip object
+ * @page: First page to start checking for bad block marker usage
+ *
+ * Returns an integer that corresponds to the page offset within a block, for
+ * a page that is used to store bad block markers. If no more pages are
+ * available, -EINVAL is returned.
+ */
+int nand_bbm_get_next_page(struct nand_chip *chip, int page)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ int last_page = ((mtd->erasesize - mtd->writesize) >>
+ chip->page_shift) & chip->pagemask;
+
+ if (page == 0 && chip->options & NAND_BBM_FIRSTPAGE)
+ return 0;
+ else if (page <= 1 && chip->options & NAND_BBM_SECONDPAGE)
+ return 1;
+ else if (page <= last_page && chip->options & NAND_BBM_LASTPAGE)
+ return last_page;
+
+ return -EINVAL;
+}
+
+/**
* nand_block_bad - [DEFAULT] Read bad block marker from the chip
* @chip: NAND chip object
* @ofs: offset from device start
@@ -291,18 +316,15 @@ static void nand_release_device(struct nand_chip *chip)
*/
static int nand_block_bad(struct nand_chip *chip, loff_t ofs)
{
- struct mtd_info *mtd = nand_to_mtd(chip);
- int page, page_end, res;
+ int first_page, page_offset;
+ int res;
u8 bad;
- if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
- ofs += mtd->erasesize - mtd->writesize;
-
- page = (int)(ofs >> chip->page_shift) & chip->pagemask;
- page_end = page + (chip->bbt_options & NAND_BBT_SCAN2NDPAGE ? 2 : 1);
+ first_page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+ page_offset = nand_bbm_get_next_page(chip, 0);
- for (; page < page_end; page++) {
- res = chip->ecc.read_oob(chip, page);
+ while (page_offset >= 0) {
+ res = chip->ecc.read_oob(chip, first_page + page_offset);
if (res < 0)
return res;
@@ -314,6 +336,8 @@ static int nand_block_bad(struct nand_chip *chip, loff_t ofs)
res = hweight8(bad) < chip->badblockbits;
if (res)
return res;
+
+ page_offset = nand_bbm_get_next_page(chip, page_offset + 1);
}
return 0;
@@ -459,8 +483,8 @@ static int nand_do_write_oob(struct nand_chip *chip, loff_t to,
}
/* Invalidate the page cache, if we write to the cached page */
- if (page == chip->pagebuf)
- chip->pagebuf = -1;
+ if (page == chip->pagecache.page)
+ chip->pagecache.page = -1;
nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
@@ -493,7 +517,7 @@ static int nand_default_block_markbad(struct nand_chip *chip, loff_t ofs)
struct mtd_info *mtd = nand_to_mtd(chip);
struct mtd_oob_ops ops;
uint8_t buf[2] = { 0, 0 };
- int ret = 0, res, i = 0;
+ int ret = 0, res, page_offset;
memset(&ops, 0, sizeof(ops));
ops.oobbuf = buf;
@@ -506,17 +530,18 @@ static int nand_default_block_markbad(struct nand_chip *chip, loff_t ofs)
}
ops.mode = MTD_OPS_PLACE_OOB;
- /* Write to first/last page(s) if necessary */
- if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
- ofs += mtd->erasesize - mtd->writesize;
- do {
- res = nand_do_write_oob(chip, ofs, &ops);
+ page_offset = nand_bbm_get_next_page(chip, 0);
+
+ while (page_offset >= 0) {
+ res = nand_do_write_oob(chip,
+ ofs + (page_offset * mtd->writesize),
+ &ops);
+
if (!ret)
ret = res;
- i++;
- ofs += mtd->writesize;
- } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
+ page_offset = nand_bbm_get_next_page(chip, page_offset + 1);
+ }
return ret;
}
@@ -3173,7 +3198,7 @@ static int nand_do_read_ops(struct nand_chip *chip, loff_t from,
use_bufpoi = 0;
/* Is the current page in the buffer? */
- if (realpage != chip->pagebuf || oob) {
+ if (realpage != chip->pagecache.page || oob) {
bufpoi = use_bufpoi ? chip->data_buf : buf;
if (use_bufpoi && aligned)
@@ -3199,7 +3224,7 @@ read_retry:
if (ret < 0) {
if (use_bufpoi)
/* Invalidate page cache */
- chip->pagebuf = -1;
+ chip->pagecache.page = -1;
break;
}
@@ -3208,11 +3233,11 @@ read_retry:
if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
!(mtd->ecc_stats.failed - ecc_failures) &&
(ops->mode != MTD_OPS_RAW)) {
- chip->pagebuf = realpage;
- chip->pagebuf_bitflips = ret;
+ chip->pagecache.page = realpage;
+ chip->pagecache.bitflips = ret;
} else {
/* Invalidate page cache */
- chip->pagebuf = -1;
+ chip->pagecache.page = -1;
}
memcpy(buf, chip->data_buf + col, bytes);
}
@@ -3252,7 +3277,7 @@ read_retry:
memcpy(buf, chip->data_buf + col, bytes);
buf += bytes;
max_bitflips = max_t(unsigned int, max_bitflips,
- chip->pagebuf_bitflips);
+ chip->pagecache.bitflips);
}
readlen -= bytes;
@@ -3973,9 +3998,9 @@ static int nand_do_write_ops(struct nand_chip *chip, loff_t to,
page = realpage & chip->pagemask;
/* Invalidate the page cache, when we write to the cached page */
- if (to <= ((loff_t)chip->pagebuf << chip->page_shift) &&
- ((loff_t)chip->pagebuf << chip->page_shift) < (to + ops->len))
- chip->pagebuf = -1;
+ if (to <= ((loff_t)chip->pagecache.page << chip->page_shift) &&
+ ((loff_t)chip->pagecache.page << chip->page_shift) < (to + ops->len))
+ chip->pagecache.page = -1;
/* Don't allow multipage oob writes with offset */
if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen)) {
@@ -4004,10 +4029,9 @@ static int nand_do_write_ops(struct nand_chip *chip, loff_t to,
__func__, buf);
if (part_pagewr)
bytes = min_t(int, bytes - column, writelen);
- chip->pagebuf = -1;
- memset(chip->data_buf, 0xff, mtd->writesize);
- memcpy(&chip->data_buf[column], buf, bytes);
- wbuf = chip->data_buf;
+ wbuf = nand_get_data_buf(chip);
+ memset(wbuf, 0xff, mtd->writesize);
+ memcpy(&wbuf[column], buf, bytes);
}
if (unlikely(oob)) {
@@ -4197,9 +4221,9 @@ int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
* Invalidate the page cache, if we erase the block which
* contains the current cached page.
*/
- if (page <= chip->pagebuf && chip->pagebuf <
+ if (page <= chip->pagecache.page && chip->pagecache.page <
(page + pages_per_block))
- chip->pagebuf = -1;
+ chip->pagecache.page = -1;
ret = nand_erase_op(chip, (page & chip->pagemask) >>
(chip->phys_erase_shift - chip->page_shift));
@@ -4299,42 +4323,6 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
}
/**
- * nand_max_bad_blocks - [MTD Interface] Max number of bad blocks for an mtd
- * @mtd: MTD device structure
- * @ofs: offset relative to mtd start
- * @len: length of mtd
- */
-static int nand_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- u32 part_start_block;
- u32 part_end_block;
- u32 part_start_die;
- u32 part_end_die;
-
- /*
- * max_bb_per_die and blocks_per_die used to determine
- * the maximum bad block count.
- */
- if (!chip->max_bb_per_die || !chip->blocks_per_die)
- return -ENOTSUPP;
-
- /* Get the start and end of the partition in erase blocks. */
- part_start_block = mtd_div_by_eb(ofs, mtd);
- part_end_block = mtd_div_by_eb(len, mtd) + part_start_block - 1;
-
- /* Get the start and end LUNs of the partition. */
- part_start_die = part_start_block / chip->blocks_per_die;
- part_end_die = part_end_block / chip->blocks_per_die;
-
- /*
- * Look up the bad blocks per unit and multiply by the number of units
- * that the partition spans.
- */
- return chip->max_bb_per_die * (part_end_die - part_start_die + 1);
-}
-
-/**
* nand_suspend - [MTD Interface] Suspend the NAND flash
* @mtd: MTD device structure
*/
@@ -4485,21 +4473,29 @@ static int nand_get_bits_per_cell(u8 cellinfo)
*/
void nand_decode_ext_id(struct nand_chip *chip)
{
+ struct nand_memory_organization *memorg;
struct mtd_info *mtd = nand_to_mtd(chip);
int extid;
u8 *id_data = chip->id.data;
+
+ memorg = nanddev_get_memorg(&chip->base);
+
/* The 3rd id byte holds MLC / multichip data */
- chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
+ memorg->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
/* The 4th id byte is the important one */
extid = id_data[3];
/* Calc pagesize */
- mtd->writesize = 1024 << (extid & 0x03);
+ memorg->pagesize = 1024 << (extid & 0x03);
+ mtd->writesize = memorg->pagesize;
extid >>= 2;
/* Calc oobsize */
- mtd->oobsize = (8 << (extid & 0x01)) * (mtd->writesize >> 9);
+ memorg->oobsize = (8 << (extid & 0x01)) * (mtd->writesize >> 9);
+ mtd->oobsize = memorg->oobsize;
extid >>= 2;
/* Calc blocksize. Blocksize is multiples of 64KiB */
+ memorg->pages_per_eraseblock = ((64 * 1024) << (extid & 0x03)) /
+ memorg->pagesize;
mtd->erasesize = (64 * 1024) << (extid & 0x03);
extid >>= 2;
/* Get buswidth information */
@@ -4516,13 +4512,19 @@ EXPORT_SYMBOL_GPL(nand_decode_ext_id);
static void nand_decode_id(struct nand_chip *chip, struct nand_flash_dev *type)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
+
+ memorg = nanddev_get_memorg(&chip->base);
+ memorg->pages_per_eraseblock = type->erasesize / type->pagesize;
mtd->erasesize = type->erasesize;
- mtd->writesize = type->pagesize;
- mtd->oobsize = mtd->writesize / 32;
+ memorg->pagesize = type->pagesize;
+ mtd->writesize = memorg->pagesize;
+ memorg->oobsize = memorg->pagesize / 32;
+ mtd->oobsize = memorg->oobsize;
/* All legacy ID NAND are small-page, SLC */
- chip->bits_per_cell = 1;
+ memorg->bits_per_cell = 1;
}
/*
@@ -4536,9 +4538,9 @@ static void nand_decode_bbm_options(struct nand_chip *chip)
/* Set the bad block position */
if (mtd->writesize > 512 || (chip->options & NAND_BUSWIDTH_16))
- chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
+ chip->badblockpos = NAND_BBM_POS_LARGE;
else
- chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
+ chip->badblockpos = NAND_BBM_POS_SMALL;
}
static inline bool is_full_id_nand(struct nand_flash_dev *type)
@@ -4550,18 +4552,28 @@ static bool find_full_id_nand(struct nand_chip *chip,
struct nand_flash_dev *type)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
u8 *id_data = chip->id.data;
+ memorg = nanddev_get_memorg(&chip->base);
+
if (!strncmp(type->id, id_data, type->id_len)) {
- mtd->writesize = type->pagesize;
+ memorg->pagesize = type->pagesize;
+ mtd->writesize = memorg->pagesize;
+ memorg->pages_per_eraseblock = type->erasesize /
+ type->pagesize;
mtd->erasesize = type->erasesize;
- mtd->oobsize = type->oobsize;
-
- chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
- chip->chipsize = (uint64_t)type->chipsize << 20;
+ memorg->oobsize = type->oobsize;
+ mtd->oobsize = memorg->oobsize;
+
+ memorg->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
+ memorg->eraseblocks_per_lun =
+ DIV_ROUND_DOWN_ULL((u64)type->chipsize << 20,
+ memorg->pagesize *
+ memorg->pages_per_eraseblock);
chip->options |= type->options;
- chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
- chip->ecc_step_ds = NAND_ECC_STEP(type);
+ chip->base.eccreq.strength = NAND_ECC_STRENGTH(type);
+ chip->base.eccreq.step_size = NAND_ECC_STEP(type);
chip->onfi_timing_mode_default =
type->onfi_timing_mode_default;
@@ -4587,8 +4599,12 @@ static void nand_manufacturer_detect(struct nand_chip *chip)
*/
if (chip->manufacturer.desc && chip->manufacturer.desc->ops &&
chip->manufacturer.desc->ops->detect) {
+ struct nand_memory_organization *memorg;
+
+ memorg = nanddev_get_memorg(&chip->base);
+
/* The 3rd id byte holds MLC / multichip data */
- chip->bits_per_cell = nand_get_bits_per_cell(chip->id.data[2]);
+ memorg->bits_per_cell = nand_get_bits_per_cell(chip->id.data[2]);
chip->manufacturer.desc->ops->detect(chip);
} else {
nand_decode_ext_id(chip);
@@ -4637,9 +4653,20 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
{
const struct nand_manufacturer *manufacturer;
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
int busw, ret;
u8 *id_data = chip->id.data;
u8 maf_id, dev_id;
+ u64 targetsize;
+
+ /*
+ * Let's start by initializing memorg fields that might be left
+ * unassigned by the ID-based detection logic.
+ */
+ memorg = nanddev_get_memorg(&chip->base);
+ memorg->planes_per_lun = 1;
+ memorg->luns_per_target = 1;
+ memorg->ntargets = 1;
/*
* Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
@@ -4735,8 +4762,6 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
if (!chip->parameters.model)
return -ENOMEM;
- chip->chipsize = (uint64_t)type->chipsize << 20;
-
if (!type->pagesize)
nand_manufacturer_detect(chip);
else
@@ -4745,6 +4770,11 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
/* Get chip options */
chip->options |= type->options;
+ memorg->eraseblocks_per_lun =
+ DIV_ROUND_DOWN_ULL((u64)type->chipsize << 20,
+ memorg->pagesize *
+ memorg->pages_per_eraseblock);
+
ident_done:
if (!mtd->name)
mtd->name = chip->parameters.model;
@@ -4773,14 +4803,15 @@ ident_done:
/* Calculate the address shift from the page size */
chip->page_shift = ffs(mtd->writesize) - 1;
/* Convert chipsize to number of pages per chip -1 */
- chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+ targetsize = nanddev_target_size(&chip->base);
+ chip->pagemask = (targetsize >> chip->page_shift) - 1;
chip->bbt_erase_shift = chip->phys_erase_shift =
ffs(mtd->erasesize) - 1;
- if (chip->chipsize & 0xffffffff)
- chip->chip_shift = ffs((unsigned)chip->chipsize) - 1;
+ if (targetsize & 0xffffffff)
+ chip->chip_shift = ffs((unsigned)targetsize) - 1;
else {
- chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32));
+ chip->chip_shift = ffs((unsigned)(targetsize >> 32));
chip->chip_shift += 32 - 1;
}
@@ -4796,7 +4827,7 @@ ident_done:
pr_info("%s %s\n", nand_manufacturer_name(manufacturer),
chip->parameters.model);
pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
- (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
+ (int)(targetsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
return 0;
@@ -4971,10 +5002,13 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
struct nand_flash_dev *table)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
int nand_maf_id, nand_dev_id;
unsigned int i;
int ret;
+ memorg = nanddev_get_memorg(&chip->base);
+
/* Assume all dies are deselected when we enter nand_scan_ident(). */
chip->cur_cs = -1;
@@ -4990,12 +5024,6 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
if (!mtd->name && mtd->dev.parent)
mtd->name = dev_name(mtd->dev.parent);
- /*
- * Start with chips->numchips = maxchips to let nand_select_target() do
- * its job. chip->numchips will be adjusted after.
- */
- chip->numchips = maxchips;
-
/* Set the default functions */
nand_set_defaults(chip);
@@ -5042,8 +5070,8 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
pr_info("%d chips detected\n", i);
/* Store the number of chips and calc total size for mtd */
- chip->numchips = i;
- mtd->size = i * chip->chipsize;
+ memorg->ntargets = i;
+ mtd->size = i * nanddev_target_size(&chip->base);
return 0;
}
@@ -5078,13 +5106,13 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
ecc->bytes = 3;
ecc->strength = 1;
- if (IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC))
+ if (IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC))
ecc->options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
return 0;
case NAND_ECC_BCH:
if (!mtd_nand_has_bch()) {
- WARN(1, "CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+ WARN(1, "CONFIG_MTD_NAND_ECC_SW_BCH not enabled\n");
return -EINVAL;
}
ecc->calculate = nand_bch_calculate_ecc;
@@ -5224,8 +5252,8 @@ nand_match_ecc_req(struct nand_chip *chip,
{
struct mtd_info *mtd = nand_to_mtd(chip);
const struct nand_ecc_step_info *stepinfo;
- int req_step = chip->ecc_step_ds;
- int req_strength = chip->ecc_strength_ds;
+ int req_step = chip->base.eccreq.step_size;
+ int req_strength = chip->base.eccreq.strength;
int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total;
int best_step, best_strength, best_ecc_bytes;
int best_ecc_bytes_total = INT_MAX;
@@ -5418,7 +5446,7 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
struct nand_ecc_ctrl *ecc = &chip->ecc;
int corr, ds_corr;
- if (ecc->size == 0 || chip->ecc_step_ds == 0)
+ if (ecc->size == 0 || chip->base.eccreq.step_size == 0)
/* Not enough information */
return true;
@@ -5427,11 +5455,56 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
* the correction density.
*/
corr = (mtd->writesize * ecc->strength) / ecc->size;
- ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds;
+ ds_corr = (mtd->writesize * chip->base.eccreq.strength) /
+ chip->base.eccreq.step_size;
- return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
+ return corr >= ds_corr && ecc->strength >= chip->base.eccreq.strength;
}
+static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
+{
+ struct nand_chip *chip = container_of(nand, struct nand_chip,
+ base);
+ unsigned int eb = nanddev_pos_to_row(nand, pos);
+ int ret;
+
+ eb >>= nand->rowconv.eraseblock_addr_shift;
+
+ nand_select_target(chip, pos->target);
+ ret = nand_erase_op(chip, eb);
+ nand_deselect_target(chip);
+
+ return ret;
+}
+
+static int rawnand_markbad(struct nand_device *nand,
+ const struct nand_pos *pos)
+{
+ struct nand_chip *chip = container_of(nand, struct nand_chip,
+ base);
+
+ return nand_markbad_bbm(chip, nanddev_pos_to_offs(nand, pos));
+}
+
+static bool rawnand_isbad(struct nand_device *nand, const struct nand_pos *pos)
+{
+ struct nand_chip *chip = container_of(nand, struct nand_chip,
+ base);
+ int ret;
+
+ nand_select_target(chip, pos->target);
+ ret = nand_isbad_bbm(chip, nanddev_pos_to_offs(nand, pos));
+ nand_deselect_target(chip);
+
+ return ret;
+}
+
+static const struct nand_ops rawnand_ops = {
+ .erase = rawnand_erase,
+ .markbad = rawnand_markbad,
+ .isbad = rawnand_isbad,
+};
+
/**
* nand_scan_tail - Scan for the NAND device
* @chip: NAND chip object
@@ -5687,7 +5760,7 @@ static int nand_scan_tail(struct nand_chip *chip)
chip->subpagesize = mtd->writesize >> mtd->subpage_sft;
/* Invalidate the pagebuffer reference */
- chip->pagebuf = -1;
+ chip->pagecache.page = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
switch (ecc->mode) {
@@ -5700,10 +5773,15 @@ static int nand_scan_tail(struct nand_chip *chip)
break;
}
+ ret = nanddev_init(&chip->base, &rawnand_ops, mtd->owner);
+ if (ret)
+ goto err_nand_manuf_cleanup;
+
+ /* Adjust the MTD_CAP_ flags when NAND_ROM is set. */
+ if (chip->options & NAND_ROM)
+ mtd->flags = MTD_CAP_ROM;
+
/* Fill in remaining MTD driver data */
- mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH;
- mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
- MTD_CAP_NANDFLASH;
mtd->_erase = nand_erase;
mtd->_point = NULL;
mtd->_unpoint = NULL;
@@ -5719,8 +5797,7 @@ static int nand_scan_tail(struct nand_chip *chip)
mtd->_block_isreserved = nand_block_isreserved;
mtd->_block_isbad = nand_block_isbad;
mtd->_block_markbad = nand_block_markbad;
- mtd->_max_bad_blocks = nand_max_bad_blocks;
- mtd->writebufsize = mtd->writesize;
+ mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks;
/*
* Initialize bitflip_threshold to its default prior scan_bbt() call.
@@ -5733,13 +5810,13 @@ static int nand_scan_tail(struct nand_chip *chip)
/* Initialize the ->data_interface field. */
ret = nand_init_data_interface(chip);
if (ret)
- goto err_nand_manuf_cleanup;
+ goto err_nanddev_cleanup;
/* Enter fastest possible mode on all dies. */
- for (i = 0; i < chip->numchips; i++) {
+ for (i = 0; i < nanddev_ntargets(&chip->base); i++) {
ret = nand_setup_data_interface(chip, i);
if (ret)
- goto err_nand_manuf_cleanup;
+ goto err_nanddev_cleanup;
}
/* Check, if we should skip the bad block table scan */
@@ -5749,11 +5826,14 @@ static int nand_scan_tail(struct nand_chip *chip)
/* Build bad block table */
ret = nand_create_bbt(chip);
if (ret)
- goto err_nand_manuf_cleanup;
+ goto err_nanddev_cleanup;
return 0;
+err_nanddev_cleanup:
+ nanddev_cleanup(&chip->base);
+
err_nand_manuf_cleanup:
nand_manufacturer_cleanup(chip);
diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c
index 19a2b563acdf..fd3c10216eda 100644
--- a/drivers/mtd/nand/raw/nand_bbt.c
+++ b/drivers/mtd/nand/raw/nand_bbt.c
@@ -264,18 +264,19 @@ static int read_abs_bbt(struct nand_chip *this, uint8_t *buf,
struct nand_bbt_descr *td, int chip)
{
struct mtd_info *mtd = nand_to_mtd(this);
+ u64 targetsize = nanddev_target_size(&this->base);
int res = 0, i;
if (td->options & NAND_BBT_PERCHIP) {
int offs = 0;
- for (i = 0; i < this->numchips; i++) {
+ for (i = 0; i < nanddev_ntargets(&this->base); i++) {
if (chip == -1 || chip == i)
res = read_bbt(this, buf, td->pages[i],
- this->chipsize >> this->bbt_erase_shift,
+ targetsize >> this->bbt_erase_shift,
td, offs);
if (res)
return res;
- offs += this->chipsize >> this->bbt_erase_shift;
+ offs += targetsize >> this->bbt_erase_shift;
}
} else {
res = read_bbt(this, buf, td->pages[0],
@@ -415,11 +416,12 @@ static void read_abs_bbts(struct nand_chip *this, uint8_t *buf,
/* Scan a given block partially */
static int scan_block_fast(struct nand_chip *this, struct nand_bbt_descr *bd,
- loff_t offs, uint8_t *buf, int numpages)
+ loff_t offs, uint8_t *buf)
{
struct mtd_info *mtd = nand_to_mtd(this);
+
struct mtd_oob_ops ops;
- int j, ret;
+ int ret, page_offset;
ops.ooblen = mtd->oobsize;
ops.oobbuf = buf;
@@ -427,12 +429,15 @@ static int scan_block_fast(struct nand_chip *this, struct nand_bbt_descr *bd,
ops.datbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
- for (j = 0; j < numpages; j++) {
+ page_offset = nand_bbm_get_next_page(this, 0);
+
+ while (page_offset >= 0) {
/*
* Read the full oob until read_oob is fixed to handle single
* byte reads for 16 bit buswidth.
*/
- ret = mtd_read_oob(mtd, offs, &ops);
+ ret = mtd_read_oob(mtd, offs + (page_offset * mtd->writesize),
+ &ops);
/* Ignore ECC errors when checking for BBM */
if (ret && !mtd_is_bitflip_or_eccerr(ret))
return ret;
@@ -440,8 +445,9 @@ static int scan_block_fast(struct nand_chip *this, struct nand_bbt_descr *bd,
if (check_short_pattern(buf, bd))
return 1;
- offs += mtd->writesize;
+ page_offset = nand_bbm_get_next_page(this, page_offset + 1);
}
+
return 0;
}
@@ -459,43 +465,35 @@ static int scan_block_fast(struct nand_chip *this, struct nand_bbt_descr *bd,
static int create_bbt(struct nand_chip *this, uint8_t *buf,
struct nand_bbt_descr *bd, int chip)
{
+ u64 targetsize = nanddev_target_size(&this->base);
struct mtd_info *mtd = nand_to_mtd(this);
- int i, numblocks, numpages;
- int startblock;
+ int i, numblocks, startblock;
loff_t from;
pr_info("Scanning device for bad blocks\n");
- if (bd->options & NAND_BBT_SCAN2NDPAGE)
- numpages = 2;
- else
- numpages = 1;
-
if (chip == -1) {
numblocks = mtd->size >> this->bbt_erase_shift;
startblock = 0;
from = 0;
} else {
- if (chip >= this->numchips) {
+ if (chip >= nanddev_ntargets(&this->base)) {
pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
- chip + 1, this->numchips);
+ chip + 1, nanddev_ntargets(&this->base));
return -EINVAL;
}
- numblocks = this->chipsize >> this->bbt_erase_shift;
+ numblocks = targetsize >> this->bbt_erase_shift;
startblock = chip * numblocks;
numblocks += startblock;
from = (loff_t)startblock << this->bbt_erase_shift;
}
- if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
- from += mtd->erasesize - (mtd->writesize * numpages);
-
for (i = startblock; i < numblocks; i++) {
int ret;
BUG_ON(bd->options & NAND_BBT_NO_OOB);
- ret = scan_block_fast(this, bd, from, buf, numpages);
+ ret = scan_block_fast(this, bd, from, buf);
if (ret < 0)
return ret;
@@ -529,6 +527,7 @@ static int create_bbt(struct nand_chip *this, uint8_t *buf,
static int search_bbt(struct nand_chip *this, uint8_t *buf,
struct nand_bbt_descr *td)
{
+ u64 targetsize = nanddev_target_size(&this->base);
struct mtd_info *mtd = nand_to_mtd(this);
int i, chips;
int startblock, block, dir;
@@ -547,8 +546,8 @@ static int search_bbt(struct nand_chip *this, uint8_t *buf,
/* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
- chips = this->numchips;
- bbtblocks = this->chipsize >> this->bbt_erase_shift;
+ chips = nanddev_ntargets(&this->base);
+ bbtblocks = targetsize >> this->bbt_erase_shift;
startblock &= bbtblocks - 1;
} else {
chips = 1;
@@ -576,7 +575,7 @@ static int search_bbt(struct nand_chip *this, uint8_t *buf,
break;
}
}
- startblock += this->chipsize >> this->bbt_erase_shift;
+ startblock += targetsize >> this->bbt_erase_shift;
}
/* Check, if we found a bbt for each requested chip */
for (i = 0; i < chips; i++) {
@@ -626,6 +625,7 @@ static void search_read_bbts(struct nand_chip *this, uint8_t *buf,
static int get_bbt_block(struct nand_chip *this, struct nand_bbt_descr *td,
struct nand_bbt_descr *md, int chip)
{
+ u64 targetsize = nanddev_target_size(&this->base);
int startblock, dir, page, numblocks, i;
/*
@@ -637,9 +637,9 @@ static int get_bbt_block(struct nand_chip *this, struct nand_bbt_descr *td,
return td->pages[chip] >>
(this->bbt_erase_shift - this->page_shift);
- numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
+ numblocks = (int)(targetsize >> this->bbt_erase_shift);
if (!(td->options & NAND_BBT_PERCHIP))
- numblocks *= this->numchips;
+ numblocks *= nanddev_ntargets(&this->base);
/*
* Automatic placement of the bad block table. Search direction
@@ -717,6 +717,7 @@ static int write_bbt(struct nand_chip *this, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md,
int chipsel)
{
+ u64 targetsize = nanddev_target_size(&this->base);
struct mtd_info *mtd = nand_to_mtd(this);
struct erase_info einfo;
int i, res, chip = 0;
@@ -737,10 +738,10 @@ static int write_bbt(struct nand_chip *this, uint8_t *buf,
rcode = 0xff;
/* Write bad block table per chip rather than per device? */
if (td->options & NAND_BBT_PERCHIP) {
- numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
+ numblocks = (int)(targetsize >> this->bbt_erase_shift);
/* Full device write or specific chip? */
if (chipsel == -1) {
- nrchips = this->numchips;
+ nrchips = nanddev_ntargets(&this->base);
} else {
nrchips = chipsel + 1;
chip = chipsel;
@@ -901,7 +902,9 @@ static int write_bbt(struct nand_chip *this, uint8_t *buf,
static inline int nand_memory_bbt(struct nand_chip *this,
struct nand_bbt_descr *bd)
{
- return create_bbt(this, this->data_buf, bd, -1);
+ u8 *pagebuf = nand_get_data_buf(this);
+
+ return create_bbt(this, pagebuf, bd, -1);
}
/**
@@ -925,7 +928,7 @@ static int check_create(struct nand_chip *this, uint8_t *buf,
/* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP)
- chips = this->numchips;
+ chips = nanddev_ntargets(&this->base);
else
chips = 1;
@@ -1097,14 +1100,15 @@ static int nand_update_bbt(struct nand_chip *this, loff_t offs)
*/
static void mark_bbt_region(struct nand_chip *this, struct nand_bbt_descr *td)
{
+ u64 targetsize = nanddev_target_size(&this->base);
struct mtd_info *mtd = nand_to_mtd(this);
int i, j, chips, block, nrblocks, update;
uint8_t oldval;
/* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
- chips = this->numchips;
- nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
+ chips = nanddev_ntargets(&this->base);
+ nrblocks = (int)(targetsize >> this->bbt_erase_shift);
} else {
chips = 1;
nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
@@ -1157,6 +1161,7 @@ static void mark_bbt_region(struct nand_chip *this, struct nand_bbt_descr *td)
*/
static void verify_bbt_descr(struct nand_chip *this, struct nand_bbt_descr *bd)
{
+ u64 targetsize = nanddev_target_size(&this->base);
struct mtd_info *mtd = nand_to_mtd(this);
u32 pattern_len;
u32 bits;
@@ -1185,7 +1190,7 @@ static void verify_bbt_descr(struct nand_chip *this, struct nand_bbt_descr *bd)
}
if (bd->options & NAND_BBT_PERCHIP)
- table_size = this->chipsize >> this->bbt_erase_shift;
+ table_size = targetsize >> this->bbt_erase_shift;
else
table_size = mtd->size >> this->bbt_erase_shift;
table_size >>= 3;
diff --git a/drivers/mtd/nand/raw/nand_esmt.c b/drivers/mtd/nand/raw/nand_esmt.c
index 96f039a83bc8..3338c68aaaf1 100644
--- a/drivers/mtd/nand/raw/nand_esmt.c
+++ b/drivers/mtd/nand/raw/nand_esmt.c
@@ -14,20 +14,20 @@ static void esmt_nand_decode_id(struct nand_chip *chip)
/* Extract ECC requirements from 5th id byte. */
if (chip->id.len >= 5 && nand_is_slc(chip)) {
- chip->ecc_step_ds = 512;
+ chip->base.eccreq.step_size = 512;
switch (chip->id.data[4] & 0x3) {
case 0x0:
- chip->ecc_strength_ds = 4;
+ chip->base.eccreq.strength = 4;
break;
case 0x1:
- chip->ecc_strength_ds = 2;
+ chip->base.eccreq.strength = 2;
break;
case 0x2:
- chip->ecc_strength_ds = 1;
+ chip->base.eccreq.strength = 1;
break;
default:
WARN(1, "Could not get ECC info");
- chip->ecc_step_ds = 0;
+ chip->base.eccreq.step_size = 0;
break;
}
}
@@ -36,7 +36,14 @@ static void esmt_nand_decode_id(struct nand_chip *chip)
static int esmt_nand_init(struct nand_chip *chip)
{
if (nand_is_slc(chip))
- chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+ /*
+ * It is known that some ESMT SLC NANDs have been shipped
+ * with the factory bad block markers in the first or last page
+ * of the block, instead of the first or second page. To be on
+ * the safe side, let's check all three locations.
+ */
+ chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE |
+ NAND_BBM_LASTPAGE;
return 0;
}
diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index 343f477362d1..7c600c4d5ec8 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -418,24 +418,27 @@ static void hynix_nand_extract_oobsize(struct nand_chip *chip,
bool valid_jedecid)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
u8 oobsize;
+ memorg = nanddev_get_memorg(&chip->base);
+
oobsize = ((chip->id.data[3] >> 2) & 0x3) |
((chip->id.data[3] >> 4) & 0x4);
if (valid_jedecid) {
switch (oobsize) {
case 0:
- mtd->oobsize = 2048;
+ memorg->oobsize = 2048;
break;
case 1:
- mtd->oobsize = 1664;
+ memorg->oobsize = 1664;
break;
case 2:
- mtd->oobsize = 1024;
+ memorg->oobsize = 1024;
break;
case 3:
- mtd->oobsize = 640;
+ memorg->oobsize = 640;
break;
default:
/*
@@ -450,25 +453,25 @@ static void hynix_nand_extract_oobsize(struct nand_chip *chip,
} else {
switch (oobsize) {
case 0:
- mtd->oobsize = 128;
+ memorg->oobsize = 128;
break;
case 1:
- mtd->oobsize = 224;
+ memorg->oobsize = 224;
break;
case 2:
- mtd->oobsize = 448;
+ memorg->oobsize = 448;
break;
case 3:
- mtd->oobsize = 64;
+ memorg->oobsize = 64;
break;
case 4:
- mtd->oobsize = 32;
+ memorg->oobsize = 32;
break;
case 5:
- mtd->oobsize = 16;
+ memorg->oobsize = 16;
break;
case 6:
- mtd->oobsize = 640;
+ memorg->oobsize = 640;
break;
default:
/*
@@ -492,8 +495,10 @@ static void hynix_nand_extract_oobsize(struct nand_chip *chip,
* the actual OOB size for this chip is: 640 * 16k / 8k).
*/
if (chip->id.data[1] == 0xde)
- mtd->oobsize *= mtd->writesize / SZ_8K;
+ memorg->oobsize *= memorg->pagesize / SZ_8K;
}
+
+ mtd->oobsize = memorg->oobsize;
}
static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
@@ -503,30 +508,30 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
if (valid_jedecid) {
/* Reference: H27UCG8T2E datasheet */
- chip->ecc_step_ds = 1024;
+ chip->base.eccreq.step_size = 1024;
switch (ecc_level) {
case 0:
- chip->ecc_step_ds = 0;
- chip->ecc_strength_ds = 0;
+ chip->base.eccreq.step_size = 0;
+ chip->base.eccreq.strength = 0;
break;
case 1:
- chip->ecc_strength_ds = 4;
+ chip->base.eccreq.strength = 4;
break;
case 2:
- chip->ecc_strength_ds = 24;
+ chip->base.eccreq.strength = 24;
break;
case 3:
- chip->ecc_strength_ds = 32;
+ chip->base.eccreq.strength = 32;
break;
case 4:
- chip->ecc_strength_ds = 40;
+ chip->base.eccreq.strength = 40;
break;
case 5:
- chip->ecc_strength_ds = 50;
+ chip->base.eccreq.strength = 50;
break;
case 6:
- chip->ecc_strength_ds = 60;
+ chip->base.eccreq.strength = 60;
break;
default:
/*
@@ -547,14 +552,14 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
if (nand_tech < 3) {
/* > 26nm, reference: H27UBG8T2A datasheet */
if (ecc_level < 5) {
- chip->ecc_step_ds = 512;
- chip->ecc_strength_ds = 1 << ecc_level;
+ chip->base.eccreq.step_size = 512;
+ chip->base.eccreq.strength = 1 << ecc_level;
} else if (ecc_level < 7) {
if (ecc_level == 5)
- chip->ecc_step_ds = 2048;
+ chip->base.eccreq.step_size = 2048;
else
- chip->ecc_step_ds = 1024;
- chip->ecc_strength_ds = 24;
+ chip->base.eccreq.step_size = 1024;
+ chip->base.eccreq.strength = 24;
} else {
/*
* We should never reach this case, but if that
@@ -567,14 +572,14 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
} else {
/* <= 26nm, reference: H27UBG8T2B datasheet */
if (!ecc_level) {
- chip->ecc_step_ds = 0;
- chip->ecc_strength_ds = 0;
+ chip->base.eccreq.step_size = 0;
+ chip->base.eccreq.strength = 0;
} else if (ecc_level < 5) {
- chip->ecc_step_ds = 512;
- chip->ecc_strength_ds = 1 << (ecc_level - 1);
+ chip->base.eccreq.step_size = 512;
+ chip->base.eccreq.strength = 1 << (ecc_level - 1);
} else {
- chip->ecc_step_ds = 1024;
- chip->ecc_strength_ds = 24 +
+ chip->base.eccreq.step_size = 1024;
+ chip->base.eccreq.strength = 24 +
(8 * (ecc_level - 5));
}
}
@@ -587,7 +592,7 @@ static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
u8 nand_tech;
/* We need scrambling on all TLC NANDs*/
- if (chip->bits_per_cell > 2)
+ if (nanddev_bits_per_cell(&chip->base) > 2)
chip->options |= NAND_NEED_SCRAMBLING;
/* And on MLC NANDs with sub-3xnm process */
@@ -609,9 +614,12 @@ static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
static void hynix_nand_decode_id(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
bool valid_jedecid;
u8 tmp;
+ memorg = nanddev_get_memorg(&chip->base);
+
/*
* Exclude all SLC NANDs from this advanced detection scheme.
* According to the ranges defined in several datasheets, it might
@@ -625,7 +633,8 @@ static void hynix_nand_decode_id(struct nand_chip *chip)
}
/* Extract pagesize */
- mtd->writesize = 2048 << (chip->id.data[3] & 0x03);
+ memorg->pagesize = 2048 << (chip->id.data[3] & 0x03);
+ mtd->writesize = memorg->pagesize;
tmp = (chip->id.data[3] >> 4) & 0x3;
/*
@@ -635,12 +644,19 @@ static void hynix_nand_decode_id(struct nand_chip *chip)
* The only exception is when ID[3][4:5] == 3 and ID[3][7] == 0, in
* this case the erasesize is set to 768KiB.
*/
- if (chip->id.data[3] & 0x80)
+ if (chip->id.data[3] & 0x80) {
+ memorg->pages_per_eraseblock = (SZ_1M << tmp) /
+ memorg->pagesize;
mtd->erasesize = SZ_1M << tmp;
- else if (tmp == 3)
+ } else if (tmp == 3) {
+ memorg->pages_per_eraseblock = (SZ_512K + SZ_256K) /
+ memorg->pagesize;
mtd->erasesize = SZ_512K + SZ_256K;
- else
+ } else {
+ memorg->pages_per_eraseblock = (SZ_128K << tmp) /
+ memorg->pagesize;
mtd->erasesize = SZ_128K << tmp;
+ }
/*
* Modern Toggle DDR NANDs have a valid JEDECID even though they are
@@ -672,9 +688,9 @@ static int hynix_nand_init(struct nand_chip *chip)
int ret;
if (!nand_is_slc(chip))
- chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+ chip->options |= NAND_BBM_LASTPAGE;
else
- chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+ chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
hynix = kzalloc(sizeof(*hynix), GFP_KERNEL);
if (!hynix)
diff --git a/drivers/mtd/nand/raw/nand_jedec.c b/drivers/mtd/nand/raw/nand_jedec.c
index 38b5dc22cb30..9b540e76f84f 100644
--- a/drivers/mtd/nand/raw/nand_jedec.c
+++ b/drivers/mtd/nand/raw/nand_jedec.c
@@ -22,12 +22,15 @@
int nand_jedec_detect(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
struct nand_jedec_params *p;
struct jedec_ecc_info *ecc;
int jedec_version = 0;
char id[5];
int i, val, ret;
+ memorg = nanddev_get_memorg(&chip->base);
+
/* Try JEDEC for unknown chip or LP */
ret = nand_readid_op(chip, 0x40, id, sizeof(id));
if (ret || strncmp(id, "JEDEC", sizeof(id)))
@@ -81,18 +84,24 @@ int nand_jedec_detect(struct nand_chip *chip)
goto free_jedec_param_page;
}
- mtd->writesize = le32_to_cpu(p->byte_per_page);
+ memorg->pagesize = le32_to_cpu(p->byte_per_page);
+ mtd->writesize = memorg->pagesize;
/* Please reference to the comment for nand_flash_detect_onfi. */
- mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
- mtd->erasesize *= mtd->writesize;
+ memorg->pages_per_eraseblock =
+ 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+ mtd->erasesize = memorg->pages_per_eraseblock * memorg->pagesize;
+
+ memorg->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+ mtd->oobsize = memorg->oobsize;
- mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+ memorg->luns_per_target = p->lun_count;
+ memorg->planes_per_lun = 1 << p->multi_plane_addr;
/* Please reference to the comment for nand_flash_detect_onfi. */
- chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
- chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
- chip->bits_per_cell = p->bits_per_cell;
+ memorg->eraseblocks_per_lun =
+ 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+ memorg->bits_per_cell = p->bits_per_cell;
if (le16_to_cpu(p->features) & JEDEC_FEATURE_16_BIT_BUS)
chip->options |= NAND_BUSWIDTH_16;
@@ -101,8 +110,8 @@ int nand_jedec_detect(struct nand_chip *chip)
ecc = &p->ecc_info[0];
if (ecc->codeword_size >= 9) {
- chip->ecc_strength_ds = ecc->ecc_bits;
- chip->ecc_step_ds = 1 << ecc->codeword_size;
+ chip->base.eccreq.strength = ecc->ecc_bits;
+ chip->base.eccreq.step_size = 1 << ecc->codeword_size;
} else {
pr_warn("Invalid codeword size\n");
}
diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c
index 47d8cda547cf..e287e71347c5 100644
--- a/drivers/mtd/nand/raw/nand_macronix.c
+++ b/drivers/mtd/nand/raw/nand_macronix.c
@@ -62,7 +62,7 @@ static void macronix_nand_fix_broken_get_timings(struct nand_chip *chip)
static int macronix_nand_init(struct nand_chip *chip)
{
if (nand_is_slc(chip))
- chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+ chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
macronix_nand_fix_broken_get_timings(chip);
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index b85e1c13b79e..cbd4f09ac178 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -385,13 +385,13 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
if (!chip->parameters.onfi)
return MICRON_ON_DIE_UNSUPPORTED;
- if (chip->bits_per_cell != 1)
+ if (nanddev_bits_per_cell(&chip->base) != 1)
return MICRON_ON_DIE_UNSUPPORTED;
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->ecc_strength_ds != 4 && chip->ecc_strength_ds != 8)
+ if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
/* 0x2 means on-die ECC is available. */
@@ -424,7 +424,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->ecc_strength_ds != 4 && chip->ecc_strength_ds != 8)
+ if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
return MICRON_ON_DIE_SUPPORTED;
@@ -448,7 +448,7 @@ static int micron_nand_init(struct nand_chip *chip)
goto err_free_manuf_data;
if (mtd->writesize == 2048)
- chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+ chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
ondie = micron_supports_on_die_ecc(chip);
@@ -479,7 +479,7 @@ static int micron_nand_init(struct nand_chip *chip)
* That's not needed for 8-bit ECC, because the status expose
* a better approximation of the number of bitflips in a page.
*/
- if (chip->ecc_strength_ds == 4) {
+ if (chip->base.eccreq.strength == 4) {
micron->ecc.rawbuf = kmalloc(mtd->writesize +
mtd->oobsize,
GFP_KERNEL);
@@ -489,16 +489,16 @@ static int micron_nand_init(struct nand_chip *chip)
}
}
- if (chip->ecc_strength_ds == 4)
+ if (chip->base.eccreq.strength == 4)
mtd_set_ooblayout(mtd,
&micron_nand_on_die_4_ooblayout_ops);
else
mtd_set_ooblayout(mtd,
&micron_nand_on_die_8_ooblayout_ops);
- chip->ecc.bytes = chip->ecc_strength_ds * 2;
+ chip->ecc.bytes = chip->base.eccreq.strength * 2;
chip->ecc.size = 512;
- chip->ecc.strength = chip->ecc_strength_ds;
+ chip->ecc.strength = chip->base.eccreq.strength;
chip->ecc.algo = NAND_ECC_BCH;
chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
diff --git a/drivers/mtd/nand/raw/nand_onfi.c b/drivers/mtd/nand/raw/nand_onfi.c
index d8184cf591ad..0b879bd0a68c 100644
--- a/drivers/mtd/nand/raw/nand_onfi.c
+++ b/drivers/mtd/nand/raw/nand_onfi.c
@@ -94,8 +94,8 @@ static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
goto ext_out;
}
- chip->ecc_strength_ds = ecc->ecc_bits;
- chip->ecc_step_ds = 1 << ecc->codeword_size;
+ chip->base.eccreq.strength = ecc->ecc_bits;
+ chip->base.eccreq.step_size = 1 << ecc->codeword_size;
ret = 0;
ext_out:
@@ -140,12 +140,15 @@ static void nand_bit_wise_majority(const void **srcbufs,
int nand_onfi_detect(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
struct nand_onfi_params *p;
struct onfi_params *onfi;
int onfi_version = 0;
char id[4];
int i, ret, val;
+ memorg = nanddev_get_memorg(&chip->base);
+
/* Try ONFI for unknown chip or LP */
ret = nand_readid_op(chip, 0x20, id, sizeof(id));
if (ret || strncmp(id, "ONFI", 4))
@@ -221,32 +224,36 @@ int nand_onfi_detect(struct nand_chip *chip)
goto free_onfi_param_page;
}
- mtd->writesize = le32_to_cpu(p->byte_per_page);
+ memorg->pagesize = le32_to_cpu(p->byte_per_page);
+ mtd->writesize = memorg->pagesize;
/*
* pages_per_block and blocks_per_lun may not be a power-of-2 size
* (don't ask me who thought of this...). MTD assumes that these
* dimensions will be power-of-2, so just truncate the remaining area.
*/
- mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
- mtd->erasesize *= mtd->writesize;
+ memorg->pages_per_eraseblock =
+ 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+ mtd->erasesize = memorg->pages_per_eraseblock * memorg->pagesize;
- mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+ memorg->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+ mtd->oobsize = memorg->oobsize;
- /* See erasesize comment */
- chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
- chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
- chip->bits_per_cell = p->bits_per_cell;
+ memorg->luns_per_target = p->lun_count;
+ memorg->planes_per_lun = 1 << p->interleaved_bits;
- chip->max_bb_per_die = le16_to_cpu(p->bb_per_lun);
- chip->blocks_per_die = le32_to_cpu(p->blocks_per_lun);
+ /* See erasesize comment */
+ memorg->eraseblocks_per_lun =
+ 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+ memorg->max_bad_eraseblocks_per_lun = le32_to_cpu(p->blocks_per_lun);
+ memorg->bits_per_cell = p->bits_per_cell;
if (le16_to_cpu(p->features) & ONFI_FEATURE_16_BIT_BUS)
chip->options |= NAND_BUSWIDTH_16;
if (p->ecc_bits != 0xff) {
- chip->ecc_strength_ds = p->ecc_bits;
- chip->ecc_step_ds = 512;
+ chip->base.eccreq.strength = p->ecc_bits;
+ chip->base.eccreq.step_size = 512;
} else if (onfi_version >= 21 &&
(le16_to_cpu(p->features) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
diff --git a/drivers/mtd/nand/raw/nand_samsung.c b/drivers/mtd/nand/raw/nand_samsung.c
index e46d4c492ad8..5552ce20ede0 100644
--- a/drivers/mtd/nand/raw/nand_samsung.c
+++ b/drivers/mtd/nand/raw/nand_samsung.c
@@ -20,6 +20,9 @@
static void samsung_nand_decode_id(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
+
+ memorg = nanddev_get_memorg(&chip->base);
/* New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44) */
if (chip->id.len == 6 && !nand_is_slc(chip) &&
@@ -27,29 +30,30 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
u8 extid = chip->id.data[3];
/* Get pagesize */
- mtd->writesize = 2048 << (extid & 0x03);
+ memorg->pagesize = 2048 << (extid & 0x03);
+ mtd->writesize = memorg->pagesize;
extid >>= 2;
/* Get oobsize */
switch (((extid >> 2) & 0x4) | (extid & 0x3)) {
case 1:
- mtd->oobsize = 128;
+ memorg->oobsize = 128;
break;
case 2:
- mtd->oobsize = 218;
+ memorg->oobsize = 218;
break;
case 3:
- mtd->oobsize = 400;
+ memorg->oobsize = 400;
break;
case 4:
- mtd->oobsize = 436;
+ memorg->oobsize = 436;
break;
case 5:
- mtd->oobsize = 512;
+ memorg->oobsize = 512;
break;
case 6:
- mtd->oobsize = 640;
+ memorg->oobsize = 640;
break;
default:
/*
@@ -62,31 +66,37 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
break;
}
+ mtd->oobsize = memorg->oobsize;
+
/* Get blocksize */
extid >>= 2;
+ memorg->pages_per_eraseblock = (128 * 1024) <<
+ (((extid >> 1) & 0x04) |
+ (extid & 0x03)) /
+ memorg->pagesize;
mtd->erasesize = (128 * 1024) <<
(((extid >> 1) & 0x04) | (extid & 0x03));
/* Extract ECC requirements from 5th id byte*/
extid = (chip->id.data[4] >> 4) & 0x07;
if (extid < 5) {
- chip->ecc_step_ds = 512;
- chip->ecc_strength_ds = 1 << extid;
+ chip->base.eccreq.step_size = 512;
+ chip->base.eccreq.strength = 1 << extid;
} else {
- chip->ecc_step_ds = 1024;
+ chip->base.eccreq.step_size = 1024;
switch (extid) {
case 5:
- chip->ecc_strength_ds = 24;
+ chip->base.eccreq.strength = 24;
break;
case 6:
- chip->ecc_strength_ds = 40;
+ chip->base.eccreq.strength = 40;
break;
case 7:
- chip->ecc_strength_ds = 60;
+ chip->base.eccreq.strength = 60;
break;
default:
WARN(1, "Could not decode ECC info");
- chip->ecc_step_ds = 0;
+ chip->base.eccreq.step_size = 0;
}
}
} else {
@@ -96,8 +106,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
switch (chip->id.data[1]) {
/* K9F4G08U0D-S[I|C]B0(T00) */
case 0xDC:
- chip->ecc_step_ds = 512;
- chip->ecc_strength_ds = 1;
+ chip->base.eccreq.step_size = 512;
+ chip->base.eccreq.strength = 1;
break;
/* K9F1G08U0E 21nm chips do not support subpage write */
@@ -121,9 +131,9 @@ static int samsung_nand_init(struct nand_chip *chip)
chip->options |= NAND_SAMSUNG_LP_OPTIONS;
if (!nand_is_slc(chip))
- chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+ chip->options |= NAND_BBM_LASTPAGE;
else
- chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+ chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
return 0;
}
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index d068163b64b3..74ffcae48726 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -101,6 +101,9 @@ static void toshiba_nand_benand_init(struct nand_chip *chip)
static void toshiba_nand_decode_id(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_memory_organization *memorg;
+
+ memorg = nanddev_get_memorg(&chip->base);
nand_decode_ext_id(chip);
@@ -114,8 +117,10 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
*/
if (chip->id.len >= 6 && nand_is_slc(chip) &&
(chip->id.data[5] & 0x7) == 0x6 /* 24nm */ &&
- !(chip->id.data[4] & 0x80) /* !BENAND */)
- mtd->oobsize = 32 * mtd->writesize >> 9;
+ !(chip->id.data[4] & 0x80) /* !BENAND */) {
+ memorg->oobsize = 32 * memorg->pagesize >> 9;
+ mtd->oobsize = memorg->oobsize;
+ }
/*
* Extract ECC requirements from 6th id byte.
@@ -125,20 +130,20 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
* - 24nm: 8 bit ECC for each 512Byte is required.
*/
if (chip->id.len >= 6 && nand_is_slc(chip)) {
- chip->ecc_step_ds = 512;
+ chip->base.eccreq.step_size = 512;
switch (chip->id.data[5] & 0x7) {
case 0x4:
- chip->ecc_strength_ds = 1;
+ chip->base.eccreq.strength = 1;
break;
case 0x5:
- chip->ecc_strength_ds = 4;
+ chip->base.eccreq.strength = 4;
break;
case 0x6:
- chip->ecc_strength_ds = 8;
+ chip->base.eccreq.strength = 8;
break;
default:
WARN(1, "Could not get ECC info");
- chip->ecc_step_ds = 0;
+ chip->base.eccreq.step_size = 0;
break;
}
}
@@ -147,7 +152,7 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
static int toshiba_nand_init(struct nand_chip *chip)
{
if (nand_is_slc(chip))
- chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+ chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
/* Check that chip is BENAND and ECC mode is on-die */
if (nand_is_slc(chip) && chip->ecc.mode == NAND_ECC_ON_DIE &&
diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index 933d1a629c51..df63fa564082 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -298,6 +298,8 @@ union ns_mem {
* The structure which describes all the internal simulator data.
*/
struct nandsim {
+ struct nand_chip chip;
+ struct nand_controller base;
struct mtd_partition partitions[CONFIG_NANDSIM_MAX_PARTS];
unsigned int nbparts;
@@ -644,9 +646,6 @@ static int __init init_nandsim(struct mtd_info *mtd)
return -EIO;
}
- /* Force mtd to not do delays */
- chip->legacy.chip_delay = 0;
-
/* Initialize the NAND flash parameters */
ns->busw = chip->options & NAND_BUSWIDTH_16 ? 16 : 8;
ns->geom.totsz = mtd->size;
@@ -2076,24 +2075,6 @@ static void ns_nand_write_byte(struct nand_chip *chip, u_char byte)
return;
}
-static void ns_hwcontrol(struct nand_chip *chip, int cmd, unsigned int bitmask)
-{
- struct nandsim *ns = nand_get_controller_data(chip);
-
- ns->lines.cle = bitmask & NAND_CLE ? 1 : 0;
- ns->lines.ale = bitmask & NAND_ALE ? 1 : 0;
- ns->lines.ce = bitmask & NAND_NCE ? 1 : 0;
-
- if (cmd != NAND_CMD_NONE)
- ns_nand_write_byte(chip, cmd);
-}
-
-static int ns_device_ready(struct nand_chip *chip)
-{
- NS_DBG("device_ready\n");
- return 1;
-}
-
static void ns_nand_write_buf(struct nand_chip *chip, const u_char *buf,
int len)
{
@@ -2145,7 +2126,7 @@ static void ns_nand_read_buf(struct nand_chip *chip, u_char *buf, int len)
int i;
for (i = 0; i < len; i++)
- buf[i] = chip->legacy.read_byte(chip);
+ buf[i] = ns_nand_read_byte(chip);
return;
}
@@ -2168,6 +2149,46 @@ static void ns_nand_read_buf(struct nand_chip *chip, u_char *buf, int len)
return;
}
+static int ns_exec_op(struct nand_chip *chip, const struct nand_operation *op,
+ bool check_only)
+{
+ int i;
+ unsigned int op_id;
+ const struct nand_op_instr *instr = NULL;
+ struct nandsim *ns = nand_get_controller_data(chip);
+
+ ns->lines.ce = 1;
+
+ for (op_id = 0; op_id < op->ninstrs; op_id++) {
+ instr = &op->instrs[op_id];
+ ns->lines.cle = 0;
+ ns->lines.ale = 0;
+
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ ns->lines.cle = 1;
+ ns_nand_write_byte(chip, instr->ctx.cmd.opcode);
+ break;
+ case NAND_OP_ADDR_INSTR:
+ ns->lines.ale = 1;
+ for (i = 0; i < instr->ctx.addr.naddrs; i++)
+ ns_nand_write_byte(chip, instr->ctx.addr.addrs[i]);
+ break;
+ case NAND_OP_DATA_IN_INSTR:
+ ns_nand_read_buf(chip, instr->ctx.data.buf.in, instr->ctx.data.len);
+ break;
+ case NAND_OP_DATA_OUT_INSTR:
+ ns_nand_write_buf(chip, instr->ctx.data.buf.out, instr->ctx.data.len);
+ break;
+ case NAND_OP_WAITRDY_INSTR:
+ /* we are always ready */
+ break;
+ }
+ }
+
+ return 0;
+}
+
static int ns_attach_chip(struct nand_chip *chip)
{
unsigned int eccsteps, eccbytes;
@@ -2208,6 +2229,7 @@ static int ns_attach_chip(struct nand_chip *chip)
static const struct nand_controller_ops ns_controller_ops = {
.attach_chip = ns_attach_chip,
+ .exec_op = ns_exec_op,
};
/*
@@ -2216,7 +2238,7 @@ static const struct nand_controller_ops ns_controller_ops = {
static int __init ns_init_module(void)
{
struct nand_chip *chip;
- struct nandsim *nand;
+ struct nandsim *ns;
int retval = -ENOMEM, i;
if (bus_width != 8 && bus_width != 16) {
@@ -2224,25 +2246,15 @@ static int __init ns_init_module(void)
return -EINVAL;
}
- /* Allocate and initialize mtd_info, nand_chip and nandsim structures */
- chip = kzalloc(sizeof(struct nand_chip) + sizeof(struct nandsim),
- GFP_KERNEL);
- if (!chip) {
+ ns = kzalloc(sizeof(struct nandsim), GFP_KERNEL);
+ if (!ns) {
NS_ERR("unable to allocate core structures.\n");
return -ENOMEM;
}
+ chip = &ns->chip;
nsmtd = nand_to_mtd(chip);
- nand = (struct nandsim *)(chip + 1);
- nand_set_controller_data(chip, (void *)nand);
+ nand_set_controller_data(chip, (void *)ns);
- /*
- * Register simulator's callbacks.
- */
- chip->legacy.cmd_ctrl = ns_hwcontrol;
- chip->legacy.read_byte = ns_nand_read_byte;
- chip->legacy.dev_ready = ns_device_ready;
- chip->legacy.write_buf = ns_nand_write_buf;
- chip->legacy.read_buf = ns_nand_read_buf;
chip->ecc.mode = NAND_ECC_SOFT;
chip->ecc.algo = NAND_ECC_HAMMING;
/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
@@ -2251,9 +2263,11 @@ static int __init ns_init_module(void)
switch (bbt) {
case 2:
- chip->bbt_options |= NAND_BBT_NO_OOB;
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+ /* fall through */
case 1:
- chip->bbt_options |= NAND_BBT_USE_FLASH;
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+ /* fall through */
case 0:
break;
default:
@@ -2266,19 +2280,19 @@ static int __init ns_init_module(void)
* the initial ID read command correctly
*/
if (id_bytes[6] != 0xFF || id_bytes[7] != 0xFF)
- nand->geom.idbytes = 8;
+ ns->geom.idbytes = 8;
else if (id_bytes[4] != 0xFF || id_bytes[5] != 0xFF)
- nand->geom.idbytes = 6;
+ ns->geom.idbytes = 6;
else if (id_bytes[2] != 0xFF || id_bytes[3] != 0xFF)
- nand->geom.idbytes = 4;
+ ns->geom.idbytes = 4;
else
- nand->geom.idbytes = 2;
- nand->regs.status = NS_STATUS_OK(nand);
- nand->nxstate = STATE_UNKNOWN;
- nand->options |= OPT_PAGE512; /* temporary value */
- memcpy(nand->ids, id_bytes, sizeof(nand->ids));
+ ns->geom.idbytes = 2;
+ ns->regs.status = NS_STATUS_OK(ns);
+ ns->nxstate = STATE_UNKNOWN;
+ ns->options |= OPT_PAGE512; /* temporary value */
+ memcpy(ns->ids, id_bytes, sizeof(ns->ids));
if (bus_width == 16) {
- nand->busw = 16;
+ ns->busw = 16;
chip->options |= NAND_BUSWIDTH_16;
}
@@ -2293,7 +2307,10 @@ static int __init ns_init_module(void)
if ((retval = parse_gravepages()) != 0)
goto error;
- chip->legacy.dummy_controller.ops = &ns_controller_ops;
+ nand_controller_init(&ns->base);
+ ns->base.ops = &ns_controller_ops;
+ chip->controller = &ns->base;
+
retval = nand_scan(chip, 1);
if (retval) {
NS_ERR("Could not scan NAND Simulator device\n");
@@ -2302,16 +2319,23 @@ static int __init ns_init_module(void)
if (overridesize) {
uint64_t new_size = (uint64_t)nsmtd->erasesize << overridesize;
+ struct nand_memory_organization *memorg;
+ u64 targetsize;
+
+ memorg = nanddev_get_memorg(&chip->base);
+
if (new_size >> overridesize != nsmtd->erasesize) {
NS_ERR("overridesize is too big\n");
retval = -EINVAL;
goto err_exit;
}
+
/* N.B. This relies on nand_scan not doing anything with the size before we change it */
nsmtd->size = new_size;
- chip->chipsize = new_size;
+ memorg->eraseblocks_per_lun = 1 << overridesize;
+ targetsize = nanddev_target_size(&chip->base);
chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1;
- chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+ chip->pagemask = (targetsize >> chip->page_shift) - 1;
}
if ((retval = setup_wear_reporting(nsmtd)) != 0)
@@ -2323,27 +2347,27 @@ static int __init ns_init_module(void)
if ((retval = nand_create_bbt(chip)) != 0)
goto err_exit;
- if ((retval = parse_badblocks(nand, nsmtd)) != 0)
+ if ((retval = parse_badblocks(ns, nsmtd)) != 0)
goto err_exit;
/* Register NAND partitions */
- retval = mtd_device_register(nsmtd, &nand->partitions[0],
- nand->nbparts);
+ retval = mtd_device_register(nsmtd, &ns->partitions[0],
+ ns->nbparts);
if (retval != 0)
goto err_exit;
- if ((retval = nandsim_debugfs_create(nand)) != 0)
+ if ((retval = nandsim_debugfs_create(ns)) != 0)
goto err_exit;
return 0;
err_exit:
- free_nandsim(nand);
+ free_nandsim(ns);
nand_release(chip);
- for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i)
- kfree(nand->partitions[i].name);
+ for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
+ kfree(ns->partitions[i].name);
error:
- kfree(chip);
+ kfree(ns);
free_lists();
return retval;
@@ -2364,7 +2388,7 @@ static void __exit ns_cleanup_module(void)
nand_release(chip); /* Unregister driver */
for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
kfree(ns->partitions[i].name);
- kfree(mtd_to_nand(nsmtd)); /* Free other structures */
+ kfree(ns); /* Free other structures */
free_lists();
}
diff --git a/drivers/mtd/nand/raw/nuc900_nand.c b/drivers/mtd/nand/raw/nuc900_nand.c
index 38b1994e7ed3..56fa84029482 100644
--- a/drivers/mtd/nand/raw/nuc900_nand.c
+++ b/drivers/mtd/nand/raw/nuc900_nand.c
@@ -192,8 +192,9 @@ static void nuc900_nand_command_lp(struct nand_chip *chip,
return;
case NAND_CMD_READ0:
-
write_cmd_reg(nand, NAND_CMD_READSTART);
+ /* fall through */
+
default:
if (!chip->legacy.dev_ready) {
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index 8f280a2962c8..a9a275342a41 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -1725,9 +1725,9 @@ static bool omap2_nand_ecc_check(struct omap_nand_info *info)
break;
}
- if (ecc_needs_bch && !IS_ENABLED(CONFIG_MTD_NAND_ECC_BCH)) {
+ if (ecc_needs_bch && !IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_BCH)) {
dev_err(&info->pdev->dev,
- "CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+ "CONFIG_MTD_NAND_ECC_SW_BCH not enabled\n");
return false;
}
if (ecc_needs_omap_bch && !IS_ENABLED(CONFIG_MTD_NAND_OMAP_BCH)) {
diff --git a/drivers/mtd/nand/raw/omap_elm.c b/drivers/mtd/nand/raw/omap_elm.c
index a3f32f939cc1..94c6401ef32f 100644
--- a/drivers/mtd/nand/raw/omap_elm.c
+++ b/drivers/mtd/nand/raw/omap_elm.c
@@ -465,11 +465,13 @@ static int elm_context_save(struct elm_info *info)
ELM_SYNDROME_FRAGMENT_5 + offset);
regs->elm_syndrome_fragment_4[i] = elm_read_reg(info,
ELM_SYNDROME_FRAGMENT_4 + offset);
+ /* fall through */
case BCH8_ECC:
regs->elm_syndrome_fragment_3[i] = elm_read_reg(info,
ELM_SYNDROME_FRAGMENT_3 + offset);
regs->elm_syndrome_fragment_2[i] = elm_read_reg(info,
ELM_SYNDROME_FRAGMENT_2 + offset);
+ /* fall through */
case BCH4_ECC:
regs->elm_syndrome_fragment_1[i] = elm_read_reg(info,
ELM_SYNDROME_FRAGMENT_1 + offset);
@@ -511,11 +513,13 @@ static int elm_context_restore(struct elm_info *info)
regs->elm_syndrome_fragment_5[i]);
elm_write_reg(info, ELM_SYNDROME_FRAGMENT_4 + offset,
regs->elm_syndrome_fragment_4[i]);
+ /* fall through */
case BCH8_ECC:
elm_write_reg(info, ELM_SYNDROME_FRAGMENT_3 + offset,
regs->elm_syndrome_fragment_3[i]);
elm_write_reg(info, ELM_SYNDROME_FRAGMENT_2 + offset,
regs->elm_syndrome_fragment_2[i]);
+ /* fall through */
case BCH4_ECC:
elm_write_reg(info, ELM_SYNDROME_FRAGMENT_1 + offset,
regs->elm_syndrome_fragment_1[i]);
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 920e7375084f..6ead55e05b80 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -1680,14 +1680,12 @@ check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf,
u8 *cw_data_buf, *cw_oob_buf;
int cw, data_size, oob_size, ret = 0;
- if (!data_buf) {
- data_buf = chip->data_buf;
- chip->pagebuf = -1;
- }
+ if (!data_buf)
+ data_buf = nand_get_data_buf(chip);
if (!oob_buf) {
+ nand_get_data_buf(chip);
oob_buf = chip->oob_poi;
- chip->pagebuf = -1;
}
for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index cf6b1be1cf9c..e509c93737c4 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -101,14 +101,12 @@ static const struct mtd_ooblayout_ops flctl_4secc_oob_largepage_ops = {
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr flctl_4secc_smallpage = {
- .options = NAND_BBT_SCAN2NDPAGE,
.offs = 11,
.len = 1,
.pattern = scan_ff_pattern,
};
static struct nand_bbt_descr flctl_4secc_largepage = {
- .options = NAND_BBT_SCAN2NDPAGE,
.offs = 0,
.len = 2,
.pattern = scan_ff_pattern,
@@ -986,6 +984,7 @@ static void flctl_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
static int flctl_chip_attach_chip(struct nand_chip *chip)
{
+ u64 targetsize = nanddev_target_size(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
struct sh_flctl *flctl = mtd_to_flctl(mtd);
@@ -998,11 +997,11 @@ static int flctl_chip_attach_chip(struct nand_chip *chip)
if (mtd->writesize == 512) {
flctl->page_size = 0;
- if (chip->chipsize > (32 << 20)) {
+ if (targetsize > (32 << 20)) {
/* big than 32MB */
flctl->rw_ADRCNT = ADRCNT_4;
flctl->erase_ADRCNT = ADRCNT_3;
- } else if (chip->chipsize > (2 << 16)) {
+ } else if (targetsize > (2 << 16)) {
/* big than 128KB */
flctl->rw_ADRCNT = ADRCNT_3;
flctl->erase_ADRCNT = ADRCNT_2;
@@ -1012,11 +1011,11 @@ static int flctl_chip_attach_chip(struct nand_chip *chip)
}
} else {
flctl->page_size = 1;
- if (chip->chipsize > (128 << 20)) {
+ if (targetsize > (128 << 20)) {
/* big than 128MB */
flctl->rw_ADRCNT = ADRCNT2_E;
flctl->erase_ADRCNT = ADRCNT_3;
- } else if (chip->chipsize > (8 << 16)) {
+ } else if (targetsize > (8 << 16)) {
/* big than 512KB */
flctl->rw_ADRCNT = ADRCNT_4;
flctl->erase_ADRCNT = ADRCNT_2;
@@ -1178,6 +1177,8 @@ static int flctl_probe(struct platform_device *pdev)
if (pdata->flcmncr_val & SEL_16BIT)
nand->options |= NAND_BUSWIDTH_16;
+ nand->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
+
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 4282bc477761..b021a5720b42 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -42,7 +42,8 @@
#define NFC_REG_CMD 0x0024
#define NFC_REG_RCMD_SET 0x0028
#define NFC_REG_WCMD_SET 0x002C
-#define NFC_REG_IO_DATA 0x0030
+#define NFC_REG_A10_IO_DATA 0x0030
+#define NFC_REG_A23_IO_DATA 0x0300
#define NFC_REG_ECC_CTL 0x0034
#define NFC_REG_ECC_ST 0x0038
#define NFC_REG_DEBUG 0x003C
@@ -200,6 +201,22 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
return container_of(nand, struct sunxi_nand_chip, nand);
}
+/*
+ * NAND Controller capabilities structure: stores NAND controller capabilities
+ * for distinction between compatible strings.
+ *
+ * @sram_through_ahb: On A23, we choose to access the internal RAM through AHB
+ * instead of MBUS (less configuration). A10, A10s, A13 and
+ * A20 use the MBUS but no extra configuration is needed.
+ * @reg_io_data: I/O data register
+ * @dma_maxburst: DMA maxburst
+ */
+struct sunxi_nfc_caps {
+ bool sram_through_ahb;
+ unsigned int reg_io_data;
+ unsigned int dma_maxburst;
+};
+
/**
* struct sunxi_nfc - stores sunxi NAND controller information
*
@@ -228,6 +245,7 @@ struct sunxi_nfc {
struct list_head chips;
struct completion complete;
struct dma_chan *dmac;
+ const struct sunxi_nfc_caps *caps;
};
static inline struct sunxi_nfc *to_sunxi_nfc(struct nand_controller *ctrl)
@@ -350,10 +368,29 @@ static int sunxi_nfc_dma_op_prepare(struct sunxi_nfc *nfc, const void *buf,
goto err_unmap_buf;
}
- writel(readl(nfc->regs + NFC_REG_CTL) | NFC_RAM_METHOD,
- nfc->regs + NFC_REG_CTL);
+ /*
+ * On A23, we suppose the "internal RAM" (p.12 of the NFC user manual)
+ * refers to the NAND controller's internal SRAM. This memory is mapped
+ * and so is accessible from the AHB. It seems that it can also be
+ * accessed by the MBUS. MBUS accesses are mandatory when using the
+ * internal DMA instead of the external DMA engine.
+ *
+ * During DMA I/O operation, either we access this memory from the AHB
+ * by clearing the NFC_RAM_METHOD bit, or we set the bit and use the
+ * MBUS. In this case, we should also configure the MBUS DMA length
+ * NFC_REG_MDMA_CNT(0xC4) to be chunksize * nchunks. NAND I/O over MBUS
+ * are also limited to 32kiB pages.
+ */
+ if (nfc->caps->sram_through_ahb)
+ writel(readl(nfc->regs + NFC_REG_CTL) & ~NFC_RAM_METHOD,
+ nfc->regs + NFC_REG_CTL);
+ else
+ writel(readl(nfc->regs + NFC_REG_CTL) | NFC_RAM_METHOD,
+ nfc->regs + NFC_REG_CTL);
+
writel(nchunks, nfc->regs + NFC_REG_SECTOR_NUM);
writel(chunksize, nfc->regs + NFC_REG_CNT);
+
dmat = dmaengine_submit(dmad);
ret = dma_submit_error(dmat);
@@ -1313,20 +1350,19 @@ pio_fallback:
static int sunxi_nfc_hw_ecc_read_oob(struct nand_chip *nand, int page)
{
- nand->pagebuf = -1;
+ u8 *buf = nand_get_data_buf(nand);
- return nand->ecc.read_page(nand, nand->data_buf, 1, page);
+ return nand->ecc.read_page(nand, buf, 1, page);
}
static int sunxi_nfc_hw_ecc_write_oob(struct nand_chip *nand, int page)
{
struct mtd_info *mtd = nand_to_mtd(nand);
+ u8 *buf = nand_get_data_buf(nand);
int ret;
- nand->pagebuf = -1;
-
- memset(nand->data_buf, 0xff, mtd->writesize);
- ret = nand->ecc.write_page(nand, nand->data_buf, 1, page);
+ memset(buf, 0xff, mtd->writesize);
+ ret = nand->ecc.write_page(nand, buf, 1, page);
if (ret)
return ret;
@@ -1724,8 +1760,8 @@ static int sunxi_nand_attach_chip(struct nand_chip *nand)
nand->options |= NAND_SUBPAGE_READ;
if (!ecc->size) {
- ecc->size = nand->ecc_step_ds;
- ecc->strength = nand->ecc_strength_ds;
+ ecc->size = nand->base.eccreq.step_size;
+ ecc->strength = nand->base.eccreq.strength;
}
if (!ecc->size || !ecc->strength)
@@ -2088,6 +2124,12 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
goto out_mod_clk_unprepare;
}
+ nfc->caps = of_device_get_match_data(&pdev->dev);
+ if (!nfc->caps) {
+ ret = -EINVAL;
+ goto out_ahb_reset_reassert;
+ }
+
ret = sunxi_nfc_rst(nfc);
if (ret)
goto out_ahb_reset_reassert;
@@ -2102,12 +2144,12 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
if (nfc->dmac) {
struct dma_slave_config dmac_cfg = { };
- dmac_cfg.src_addr = r->start + NFC_REG_IO_DATA;
+ dmac_cfg.src_addr = r->start + nfc->caps->reg_io_data;
dmac_cfg.dst_addr = dmac_cfg.src_addr;
dmac_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
dmac_cfg.dst_addr_width = dmac_cfg.src_addr_width;
- dmac_cfg.src_maxburst = 4;
- dmac_cfg.dst_maxburst = 4;
+ dmac_cfg.src_maxburst = nfc->caps->dma_maxburst;
+ dmac_cfg.dst_maxburst = nfc->caps->dma_maxburst;
dmaengine_slave_config(nfc->dmac, &dmac_cfg);
} else {
dev_warn(dev, "failed to request rxtx DMA channel\n");
@@ -2152,8 +2194,26 @@ static int sunxi_nfc_remove(struct platform_device *pdev)
return 0;
}
+static const struct sunxi_nfc_caps sunxi_nfc_a10_caps = {
+ .reg_io_data = NFC_REG_A10_IO_DATA,
+ .dma_maxburst = 4,
+};
+
+static const struct sunxi_nfc_caps sunxi_nfc_a23_caps = {
+ .sram_through_ahb = true,
+ .reg_io_data = NFC_REG_A23_IO_DATA,
+ .dma_maxburst = 8,
+};
+
static const struct of_device_id sunxi_nfc_ids[] = {
- { .compatible = "allwinner,sun4i-a10-nand" },
+ {
+ .compatible = "allwinner,sun4i-a10-nand",
+ .data = &sunxi_nfc_a10_caps,
+ },
+ {
+ .compatible = "allwinner,sun8i-a23-nand-controller",
+ .data = &sunxi_nfc_a23_caps,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sunxi_nfc_ids);
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index 13be32c38194..3cc9a4c41443 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -853,7 +853,7 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
} else {
strength_sel = strength[i];
- if (strength_sel < chip->ecc_strength_ds)
+ if (strength_sel < chip->base.eccreq.strength)
continue;
}
@@ -917,9 +917,9 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 512;
chip->ecc.steps = mtd->writesize / chip->ecc.size;
- if (chip->ecc_step_ds != 512) {
+ if (chip->base.eccreq.step_size != 512) {
dev_err(ctrl->dev, "Unsupported step size %d\n",
- chip->ecc_step_ds);
+ chip->base.eccreq.step_size);
return -EINVAL;
}
@@ -950,7 +950,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (ret < 0) {
dev_err(ctrl->dev,
"No valid strength found, minimum %d\n",
- chip->ecc_strength_ds);
+ chip->base.eccreq.strength);
return ret;
}
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index a662ca1970e5..6d43ddb3332f 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -850,6 +850,9 @@ static int vf610_nfc_probe(struct platform_device *pdev)
}
of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -ENODEV;
+
nfc->variant = (enum vf610_nfc_variant)of_id->data;
for_each_available_child_of_node(nfc->dev->of_node, child) {
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index fa87ae28cdfe..4c15bb58c623 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -19,21 +19,6 @@
#include <linux/spi/spi.h>
#include <linux/spi/spi-mem.h>
-static void spinand_cache_op_adjust_colum(struct spinand_device *spinand,
- const struct nand_page_io_req *req,
- u16 *column)
-{
- struct nand_device *nand = spinand_to_nand(spinand);
- unsigned int shift;
-
- if (nand->memorg.planes_per_lun < 2)
- return;
-
- /* The plane number is passed in MSB just above the column address */
- shift = fls(nand->memorg.pagesize);
- *column |= req->pos.plane << shift;
-}
-
static int spinand_read_reg_op(struct spinand_device *spinand, u8 reg, u8 *val)
{
struct spi_mem_op op = SPINAND_GET_FEATURE_OP(reg,
@@ -227,27 +212,21 @@ static int spinand_load_page_op(struct spinand_device *spinand,
static int spinand_read_from_cache_op(struct spinand_device *spinand,
const struct nand_page_io_req *req)
{
- struct spi_mem_op op = *spinand->op_templates.read_cache;
struct nand_device *nand = spinand_to_nand(spinand);
struct mtd_info *mtd = nanddev_to_mtd(nand);
- struct nand_page_io_req adjreq = *req;
+ struct spi_mem_dirmap_desc *rdesc;
unsigned int nbytes = 0;
void *buf = NULL;
u16 column = 0;
- int ret;
+ ssize_t ret;
if (req->datalen) {
- adjreq.datalen = nanddev_page_size(nand);
- adjreq.dataoffs = 0;
- adjreq.databuf.in = spinand->databuf;
buf = spinand->databuf;
- nbytes = adjreq.datalen;
+ nbytes = nanddev_page_size(nand);
+ column = 0;
}
if (req->ooblen) {
- adjreq.ooblen = nanddev_per_page_oobsize(nand);
- adjreq.ooboffs = 0;
- adjreq.oobbuf.in = spinand->oobbuf;
nbytes += nanddev_per_page_oobsize(nand);
if (!buf) {
buf = spinand->oobbuf;
@@ -255,28 +234,19 @@ static int spinand_read_from_cache_op(struct spinand_device *spinand,
}
}
- spinand_cache_op_adjust_colum(spinand, &adjreq, &column);
- op.addr.val = column;
+ rdesc = spinand->dirmaps[req->pos.plane].rdesc;
- /*
- * Some controllers are limited in term of max RX data size. In this
- * case, just repeat the READ_CACHE operation after updating the
- * column.
- */
while (nbytes) {
- op.data.buf.in = buf;
- op.data.nbytes = nbytes;
- ret = spi_mem_adjust_op_size(spinand->spimem, &op);
- if (ret)
+ ret = spi_mem_dirmap_read(rdesc, column, nbytes, buf);
+ if (ret < 0)
return ret;
- ret = spi_mem_exec_op(spinand->spimem, &op);
- if (ret)
- return ret;
+ if (!ret || ret > nbytes)
+ return -EIO;
- buf += op.data.nbytes;
- nbytes -= op.data.nbytes;
- op.addr.val += op.data.nbytes;
+ nbytes -= ret;
+ column += ret;
+ buf += ret;
}
if (req->datalen)
@@ -300,14 +270,12 @@ static int spinand_read_from_cache_op(struct spinand_device *spinand,
static int spinand_write_to_cache_op(struct spinand_device *spinand,
const struct nand_page_io_req *req)
{
- struct spi_mem_op op = *spinand->op_templates.write_cache;
struct nand_device *nand = spinand_to_nand(spinand);
struct mtd_info *mtd = nanddev_to_mtd(nand);
- struct nand_page_io_req adjreq = *req;
+ struct spi_mem_dirmap_desc *wdesc;
+ unsigned int nbytes, column = 0;
void *buf = spinand->databuf;
- unsigned int nbytes;
- u16 column = 0;
- int ret;
+ ssize_t ret;
/*
* Looks like PROGRAM LOAD (AKA write cache) does not necessarily reset
@@ -318,12 +286,6 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
*/
nbytes = nanddev_page_size(nand) + nanddev_per_page_oobsize(nand);
memset(spinand->databuf, 0xff, nbytes);
- adjreq.dataoffs = 0;
- adjreq.datalen = nanddev_page_size(nand);
- adjreq.databuf.out = spinand->databuf;
- adjreq.ooblen = nanddev_per_page_oobsize(nand);
- adjreq.ooboffs = 0;
- adjreq.oobbuf.out = spinand->oobbuf;
if (req->datalen)
memcpy(spinand->databuf + req->dataoffs, req->databuf.out,
@@ -340,42 +302,19 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
req->ooblen);
}
- spinand_cache_op_adjust_colum(spinand, &adjreq, &column);
+ wdesc = spinand->dirmaps[req->pos.plane].wdesc;
- op = *spinand->op_templates.write_cache;
- op.addr.val = column;
-
- /*
- * Some controllers are limited in term of max TX data size. In this
- * case, split the operation into one LOAD CACHE and one or more
- * LOAD RANDOM CACHE.
- */
while (nbytes) {
- op.data.buf.out = buf;
- op.data.nbytes = nbytes;
-
- ret = spi_mem_adjust_op_size(spinand->spimem, &op);
- if (ret)
- return ret;
-
- ret = spi_mem_exec_op(spinand->spimem, &op);
- if (ret)
+ ret = spi_mem_dirmap_write(wdesc, column, nbytes, buf);
+ if (ret < 0)
return ret;
- buf += op.data.nbytes;
- nbytes -= op.data.nbytes;
- op.addr.val += op.data.nbytes;
+ if (!ret || ret > nbytes)
+ return -EIO;
- /*
- * We need to use the RANDOM LOAD CACHE operation if there's
- * more than one iteration, because the LOAD operation might
- * reset the cache to 0xff.
- */
- if (nbytes) {
- column = op.addr.val;
- op = *spinand->op_templates.update_cache;
- op.addr.val = column;
- }
+ nbytes -= ret;
+ column += ret;
+ buf += ret;
}
return 0;
@@ -755,6 +694,59 @@ static int spinand_mtd_block_isreserved(struct mtd_info *mtd, loff_t offs)
return ret;
}
+static int spinand_create_dirmap(struct spinand_device *spinand,
+ unsigned int plane)
+{
+ struct nand_device *nand = spinand_to_nand(spinand);
+ struct spi_mem_dirmap_info info = {
+ .length = nanddev_page_size(nand) +
+ nanddev_per_page_oobsize(nand),
+ };
+ struct spi_mem_dirmap_desc *desc;
+
+ /* The plane number is passed in MSB just above the column address */
+ info.offset = plane << fls(nand->memorg.pagesize);
+
+ info.op_tmpl = *spinand->op_templates.update_cache;
+ desc = devm_spi_mem_dirmap_create(&spinand->spimem->spi->dev,
+ spinand->spimem, &info);
+ if (IS_ERR(desc))
+ return PTR_ERR(desc);
+
+ spinand->dirmaps[plane].wdesc = desc;
+
+ info.op_tmpl = *spinand->op_templates.read_cache;
+ desc = devm_spi_mem_dirmap_create(&spinand->spimem->spi->dev,
+ spinand->spimem, &info);
+ if (IS_ERR(desc))
+ return PTR_ERR(desc);
+
+ spinand->dirmaps[plane].rdesc = desc;
+
+ return 0;
+}
+
+static int spinand_create_dirmaps(struct spinand_device *spinand)
+{
+ struct nand_device *nand = spinand_to_nand(spinand);
+ int i, ret;
+
+ spinand->dirmaps = devm_kzalloc(&spinand->spimem->spi->dev,
+ sizeof(*spinand->dirmaps) *
+ nand->memorg.planes_per_lun,
+ GFP_KERNEL);
+ if (!spinand->dirmaps)
+ return -ENOMEM;
+
+ for (i = 0; i < nand->memorg.planes_per_lun; i++) {
+ ret = spinand_create_dirmap(spinand, i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static const struct nand_ops spinand_ops = {
.erase = spinand_erase,
.markbad = spinand_markbad,
@@ -1012,6 +1004,14 @@ static int spinand_init(struct spinand_device *spinand)
goto err_free_bufs;
}
+ ret = spinand_create_dirmaps(spinand);
+ if (ret) {
+ dev_err(dev,
+ "Failed to create direct mappings for read/write operations (err = %d)\n",
+ ret);
+ goto err_manuf_cleanup;
+ }
+
/* After power up, all blocks are locked, so unlock them here. */
for (i = 0; i < nand->memorg.ntargets; i++) {
ret = spinand_select_target(spinand, i);
@@ -1037,6 +1037,7 @@ static int spinand_init(struct spinand_device *spinand)
mtd->_block_markbad = spinand_mtd_block_markbad;
mtd->_block_isreserved = spinand_mtd_block_isreserved;
mtd->_erase = spinand_mtd_erase;
+ mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks;
if (spinand->eccinfo.ooblayout)
mtd_set_ooblayout(mtd, spinand->eccinfo.ooblayout);
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index 0b49d8264bef..e5586390026a 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -162,7 +162,7 @@ static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_INFO("GD5F1GQ4xA", 0xF1,
- NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
@@ -171,7 +171,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
gd5fxgq4xa_ecc_get_status)),
SPINAND_INFO("GD5F2GQ4xA", 0xF2,
- NAND_MEMORG(1, 2048, 64, 64, 2048, 1, 1, 1),
+ NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
@@ -180,7 +180,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
gd5fxgq4xa_ecc_get_status)),
SPINAND_INFO("GD5F4GQ4xA", 0xF4,
- NAND_MEMORG(1, 2048, 64, 64, 4096, 1, 1, 1),
+ NAND_MEMORG(1, 2048, 64, 64, 4096, 40, 1, 1, 1),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
@@ -189,7 +189,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
gd5fxgq4xa_ecc_get_status)),
SPINAND_INFO("GD5F1GQ4UExxG", 0xd1,
- NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index d16b57081c95..6502727049a8 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -100,7 +100,7 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
static const struct spinand_info macronix_spinand_table[] = {
SPINAND_INFO("MX35LF1GE4AB", 0x12,
- NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 40, 1, 1, 1),
NAND_ECCREQ(4, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
@@ -109,7 +109,7 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
mx35lf1ge4ab_ecc_get_status)),
SPINAND_INFO("MX35LF2GE4AB", 0x22,
- NAND_MEMORG(1, 2048, 64, 64, 2048, 2, 1, 1),
+ NAND_MEMORG(1, 2048, 64, 64, 2048, 20, 2, 1, 1),
NAND_ECCREQ(4, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 9c4381d6847b..7d7b1f7fcf71 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -92,7 +92,7 @@ static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
static const struct spinand_info micron_spinand_table[] = {
SPINAND_INFO("MT29F2G01ABAGD", 0x24,
- NAND_MEMORG(1, 2048, 128, 64, 2048, 2, 1, 1),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
index db8021da45b5..1cb3760ff779 100644
--- a/drivers/mtd/nand/spi/toshiba.c
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -96,7 +96,7 @@ static int tc58cxgxsx_ecc_get_status(struct spinand_device *spinand,
static const struct spinand_info toshiba_spinand_table[] = {
/* 3.3V 1Gb */
SPINAND_INFO("TC58CVG0S3", 0xC2,
- NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
@@ -106,7 +106,7 @@ static const struct spinand_info toshiba_spinand_table[] = {
tc58cxgxsx_ecc_get_status)),
/* 3.3V 2Gb */
SPINAND_INFO("TC58CVG1S3", 0xCB,
- NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
@@ -116,7 +116,7 @@ static const struct spinand_info toshiba_spinand_table[] = {
tc58cxgxsx_ecc_get_status)),
/* 3.3V 4Gb */
SPINAND_INFO("TC58CVG2S0", 0xCD,
- NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
@@ -126,7 +126,7 @@ static const struct spinand_info toshiba_spinand_table[] = {
tc58cxgxsx_ecc_get_status)),
/* 1.8V 1Gb */
SPINAND_INFO("TC58CYG0S3", 0xB2,
- NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
@@ -136,7 +136,7 @@ static const struct spinand_info toshiba_spinand_table[] = {
tc58cxgxsx_ecc_get_status)),
/* 1.8V 2Gb */
SPINAND_INFO("TC58CYG1S3", 0xBB,
- NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
@@ -146,7 +146,7 @@ static const struct spinand_info toshiba_spinand_table[] = {
tc58cxgxsx_ecc_get_status)),
/* 1.8V 4Gb */
SPINAND_INFO("TC58CYG2S0", 0xBD,
- NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index 5d944580b898..a6c17e0cace8 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -76,7 +76,7 @@ static int w25m02gv_select_target(struct spinand_device *spinand,
static const struct spinand_info winbond_spinand_table[] = {
SPINAND_INFO("W25M02GV", 0xAB,
- NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 2),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 2),
NAND_ECCREQ(1, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
@@ -85,7 +85,7 @@ static const struct spinand_info winbond_spinand_table[] = {
SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
SPINAND_SELECT_TARGET(w25m02gv_select_target)),
SPINAND_INFO("W25N01GV", 0xAA,
- NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
NAND_ECCREQ(1, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index fccf1950e92d..bc201327dda0 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -1,3 +1,30 @@
+config MTD_PARSER_IMAGETAG
+ tristate "Parser for BCM963XX Image Tag format partitions"
+ depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ select CRC32
+ help
+ Image Tag is the firmware header used by broadcom on their xDSL line
+ of devices. It is used to describe the offsets and lengths of kernel
+ and rootfs partitions.
+ This driver adds support for parsing a partition with an Image Tag
+ header and creates up to two partitions, kernel and rootfs.
+
+config MTD_AFS_PARTS
+ tristate "ARM Firmware Suite partition parsing"
+ depends on (ARM || ARM64)
+ help
+ The ARM Firmware Suite allows the user to divide flash devices into
+ multiple 'images'. Each such image has a header containing its name
+ and offset/size etc.
+
+ If you need code which can detect and parse these tables, and
+ register MTD 'partitions' corresponding to each image detected,
+ enable this option.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically. The
+ 'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
+
config MTD_PARSER_TRX
tristate "Parser for TRX format partitions"
depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
index d8418bf6804a..cddc8f35a856 100644
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -1,3 +1,5 @@
+obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o
+obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
diff --git a/drivers/mtd/parsers/afs.c b/drivers/mtd/parsers/afs.c
new file mode 100644
index 000000000000..0c730024f806
--- /dev/null
+++ b/drivers/mtd/parsers/afs.c
@@ -0,0 +1,410 @@
+/*======================================================================
+
+ drivers/mtd/afs.c: ARM Flash Layout/Partitioning
+
+ Copyright © 2000 ARM Limited
+ Copyright (C) 2019 Linus Walleij
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ This is access code for flashes using ARM's flash partitioning
+ standards.
+
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#define AFSV1_FOOTER_MAGIC 0xA0FFFF9F
+#define AFSV2_FOOTER_MAGIC1 0x464C5348 /* "FLSH" */
+#define AFSV2_FOOTER_MAGIC2 0x464F4F54 /* "FOOT" */
+
+struct footer_v1 {
+ u32 image_info_base; /* Address of first word of ImageFooter */
+ u32 image_start; /* Start of area reserved by this footer */
+ u32 signature; /* 'Magic' number proves it's a footer */
+ u32 type; /* Area type: ARM Image, SIB, customer */
+ u32 checksum; /* Just this structure */
+};
+
+struct image_info_v1 {
+ u32 bootFlags; /* Boot flags, compression etc. */
+ u32 imageNumber; /* Unique number, selects for boot etc. */
+ u32 loadAddress; /* Address program should be loaded to */
+ u32 length; /* Actual size of image */
+ u32 address; /* Image is executed from here */
+ char name[16]; /* Null terminated */
+ u32 headerBase; /* Flash Address of any stripped header */
+ u32 header_length; /* Length of header in memory */
+ u32 headerType; /* AIF, RLF, s-record etc. */
+ u32 checksum; /* Image checksum (inc. this struct) */
+};
+
+static u32 word_sum(void *words, int num)
+{
+ u32 *p = words;
+ u32 sum = 0;
+
+ while (num--)
+ sum += *p++;
+
+ return sum;
+}
+
+static u32 word_sum_v2(u32 *p, u32 num)
+{
+ u32 sum = 0;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ u32 val;
+
+ val = p[i];
+ if (val > ~sum)
+ sum++;
+ sum += val;
+ }
+ return ~sum;
+}
+
+static bool afs_is_v1(struct mtd_info *mtd, u_int off)
+{
+ /* The magic is 12 bytes from the end of the erase block */
+ u_int ptr = off + mtd->erasesize - 12;
+ u32 magic;
+ size_t sz;
+ int ret;
+
+ ret = mtd_read(mtd, ptr, 4, &sz, (u_char *)&magic);
+ if (ret < 0) {
+ printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
+ ptr, ret);
+ return false;
+ }
+ if (ret >= 0 && sz != 4)
+ return false;
+
+ return (magic == AFSV1_FOOTER_MAGIC);
+}
+
+static bool afs_is_v2(struct mtd_info *mtd, u_int off)
+{
+ /* The magic is the 8 last bytes of the erase block */
+ u_int ptr = off + mtd->erasesize - 8;
+ u32 foot[2];
+ size_t sz;
+ int ret;
+
+ ret = mtd_read(mtd, ptr, 8, &sz, (u_char *)foot);
+ if (ret < 0) {
+ printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
+ ptr, ret);
+ return false;
+ }
+ if (ret >= 0 && sz != 8)
+ return false;
+
+ return (foot[0] == AFSV2_FOOTER_MAGIC1 &&
+ foot[1] == AFSV2_FOOTER_MAGIC2);
+}
+
+static int afs_parse_v1_partition(struct mtd_info *mtd,
+ u_int off, struct mtd_partition *part)
+{
+ struct footer_v1 fs;
+ struct image_info_v1 iis;
+ u_int mask;
+ /*
+ * Static checks cannot see that we bail out if we have an error
+ * reading the footer.
+ */
+ u_int uninitialized_var(iis_ptr);
+ u_int uninitialized_var(img_ptr);
+ u_int ptr;
+ size_t sz;
+ int ret;
+ int i;
+
+ /*
+ * This is the address mask; we use this to mask off out of
+ * range address bits.
+ */
+ mask = mtd->size - 1;
+
+ ptr = off + mtd->erasesize - sizeof(fs);
+ ret = mtd_read(mtd, ptr, sizeof(fs), &sz, (u_char *)&fs);
+ if (ret >= 0 && sz != sizeof(fs))
+ ret = -EINVAL;
+ if (ret < 0) {
+ printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
+ ptr, ret);
+ return ret;
+ }
+ /*
+ * Check the checksum.
+ */
+ if (word_sum(&fs, sizeof(fs) / sizeof(u32)) != 0xffffffff)
+ return -EINVAL;
+
+ /*
+ * Hide the SIB (System Information Block)
+ */
+ if (fs.type == 2)
+ return 0;
+
+ iis_ptr = fs.image_info_base & mask;
+ img_ptr = fs.image_start & mask;
+
+ /*
+ * Check the image info base. This can not
+ * be located after the footer structure.
+ */
+ if (iis_ptr >= ptr)
+ return 0;
+
+ /*
+ * Check the start of this image. The image
+ * data can not be located after this block.
+ */
+ if (img_ptr > off)
+ return 0;
+
+ /* Read the image info block */
+ memset(&iis, 0, sizeof(iis));
+ ret = mtd_read(mtd, iis_ptr, sizeof(iis), &sz, (u_char *)&iis);
+ if (ret < 0) {
+ printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
+ iis_ptr, ret);
+ return -EINVAL;
+ }
+
+ if (sz != sizeof(iis))
+ return -EINVAL;
+
+ /*
+ * Validate the name - it must be NUL terminated.
+ */
+ for (i = 0; i < sizeof(iis.name); i++)
+ if (iis.name[i] == '\0')
+ break;
+ if (i > sizeof(iis.name))
+ return -EINVAL;
+
+ part->name = kstrdup(iis.name, GFP_KERNEL);
+ if (!part->name)
+ return -ENOMEM;
+
+ part->size = (iis.length + mtd->erasesize - 1) & ~(mtd->erasesize - 1);
+ part->offset = img_ptr;
+ part->mask_flags = 0;
+
+ printk(" mtd: at 0x%08x, %5lluKiB, %8u, %s\n",
+ img_ptr, part->size / 1024,
+ iis.imageNumber, part->name);
+
+ return 0;
+}
+
+static int afs_parse_v2_partition(struct mtd_info *mtd,
+ u_int off, struct mtd_partition *part)
+{
+ u_int ptr;
+ u32 footer[12];
+ u32 imginfo[36];
+ char *name;
+ u32 version;
+ u32 entrypoint;
+ u32 attributes;
+ u32 region_count;
+ u32 block_start;
+ u32 block_end;
+ u32 crc;
+ size_t sz;
+ int ret;
+ int i;
+ int pad = 0;
+
+ pr_debug("Parsing v2 partition @%08x-%08x\n",
+ off, off + mtd->erasesize);
+
+ /* First read the footer */
+ ptr = off + mtd->erasesize - sizeof(footer);
+ ret = mtd_read(mtd, ptr, sizeof(footer), &sz, (u_char *)footer);
+ if ((ret < 0) || (ret >= 0 && sz != sizeof(footer))) {
+ pr_err("AFS: mtd read failed at 0x%x: %d\n",
+ ptr, ret);
+ return -EIO;
+ }
+ name = (char *) &footer[0];
+ version = footer[9];
+ ptr = off + mtd->erasesize - sizeof(footer) - footer[8];
+
+ pr_debug("found image \"%s\", version %08x, info @%08x\n",
+ name, version, ptr);
+
+ /* Then read the image information */
+ ret = mtd_read(mtd, ptr, sizeof(imginfo), &sz, (u_char *)imginfo);
+ if ((ret < 0) || (ret >= 0 && sz != sizeof(imginfo))) {
+ pr_err("AFS: mtd read failed at 0x%x: %d\n",
+ ptr, ret);
+ return -EIO;
+ }
+
+ /* 32bit platforms have 4 bytes padding */
+ crc = word_sum_v2(&imginfo[1], 34);
+ if (!crc) {
+ pr_debug("Padding 1 word (4 bytes)\n");
+ pad = 1;
+ } else {
+ /* 64bit platforms have 8 bytes padding */
+ crc = word_sum_v2(&imginfo[2], 34);
+ if (!crc) {
+ pr_debug("Padding 2 words (8 bytes)\n");
+ pad = 2;
+ }
+ }
+ if (crc) {
+ pr_err("AFS: bad checksum on v2 image info: %08x\n", crc);
+ return -EINVAL;
+ }
+ entrypoint = imginfo[pad];
+ attributes = imginfo[pad+1];
+ region_count = imginfo[pad+2];
+ block_start = imginfo[20];
+ block_end = imginfo[21];
+
+ pr_debug("image entry=%08x, attr=%08x, regions=%08x, "
+ "bs=%08x, be=%08x\n",
+ entrypoint, attributes, region_count,
+ block_start, block_end);
+
+ for (i = 0; i < region_count; i++) {
+ u32 region_load_addr = imginfo[pad + 3 + i*4];
+ u32 region_size = imginfo[pad + 4 + i*4];
+ u32 region_offset = imginfo[pad + 5 + i*4];
+ u32 region_start;
+ u32 region_end;
+
+ pr_debug(" region %d: address: %08x, size: %08x, "
+ "offset: %08x\n",
+ i,
+ region_load_addr,
+ region_size,
+ region_offset);
+
+ region_start = off + region_offset;
+ region_end = region_start + region_size;
+ /* Align partition to end of erase block */
+ region_end += (mtd->erasesize - 1);
+ region_end &= ~(mtd->erasesize -1);
+ pr_debug(" partition start = %08x, partition end = %08x\n",
+ region_start, region_end);
+
+ /* Create one partition per region */
+ part->name = kstrdup(name, GFP_KERNEL);
+ if (!part->name)
+ return -ENOMEM;
+ part->offset = region_start;
+ part->size = region_end - region_start;
+ part->mask_flags = 0;
+ }
+
+ return 0;
+}
+
+static int parse_afs_partitions(struct mtd_info *mtd,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct mtd_partition *parts;
+ u_int off, sz;
+ int ret = 0;
+ int i;
+
+ /* Count the partitions by looping over all erase blocks */
+ for (i = off = sz = 0; off < mtd->size; off += mtd->erasesize) {
+ if (afs_is_v1(mtd, off)) {
+ sz += sizeof(struct mtd_partition);
+ i += 1;
+ }
+ if (afs_is_v2(mtd, off)) {
+ sz += sizeof(struct mtd_partition);
+ i += 1;
+ }
+ }
+
+ if (!i)
+ return 0;
+
+ parts = kzalloc(sz, GFP_KERNEL);
+ if (!parts)
+ return -ENOMEM;
+
+ /*
+ * Identify the partitions
+ */
+ for (i = off = 0; off < mtd->size; off += mtd->erasesize) {
+ if (afs_is_v1(mtd, off)) {
+ ret = afs_parse_v1_partition(mtd, off, &parts[i]);
+ if (ret)
+ goto out_free_parts;
+ i++;
+ }
+ if (afs_is_v2(mtd, off)) {
+ ret = afs_parse_v2_partition(mtd, off, &parts[i]);
+ if (ret)
+ goto out_free_parts;
+ i++;
+ }
+ }
+
+ *pparts = parts;
+ return i;
+
+out_free_parts:
+ while (i >= 0) {
+ if (parts[i].name)
+ kfree(parts[i].name);
+ i--;
+ }
+ kfree(parts);
+ *pparts = NULL;
+ return ret;
+}
+
+static const struct of_device_id mtd_parser_afs_of_match_table[] = {
+ { .compatible = "arm,arm-firmware-suite" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mtd_parser_afs_of_match_table);
+
+static struct mtd_part_parser afs_parser = {
+ .parse_fn = parse_afs_partitions,
+ .name = "afs",
+ .of_match_table = mtd_parser_afs_of_match_table,
+};
+module_mtd_part_parser(afs_parser);
+
+MODULE_AUTHOR("ARM Ltd");
+MODULE_DESCRIPTION("ARM Firmware Suite partition parser");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/parsers/parser_imagetag.c b/drivers/mtd/parsers/parser_imagetag.c
new file mode 100644
index 000000000000..9537c183a3be
--- /dev/null
+++ b/drivers/mtd/parsers/parser_imagetag.c
@@ -0,0 +1,222 @@
+/*
+ * BCM63XX CFE image tag parser
+ *
+ * Copyright © 2006-2008 Florian Fainelli <florian@openwrt.org>
+ * Mike Albon <malbon@openwrt.org>
+ * Copyright © 2009-2010 Daniel Dickinson <openwrt@cshore.neomailbox.net>
+ * Copyright © 2011-2013 Jonas Gorski <jonas.gorski@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bcm963xx_tag.h>
+#include <linux/crc32.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of.h>
+
+/* Ensure strings read from flash structs are null terminated */
+#define STR_NULL_TERMINATE(x) \
+ do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
+
+static int bcm963xx_read_imagetag(struct mtd_info *master, const char *name,
+ loff_t tag_offset, struct bcm_tag *buf)
+{
+ int ret;
+ size_t retlen;
+ u32 computed_crc;
+
+ ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
+ if (ret)
+ return ret;
+
+ if (retlen != sizeof(*buf))
+ return -EIO;
+
+ computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
+ offsetof(struct bcm_tag, header_crc));
+ if (computed_crc == buf->header_crc) {
+ STR_NULL_TERMINATE(buf->board_id);
+ STR_NULL_TERMINATE(buf->tag_version);
+
+ pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
+ name, tag_offset, buf->tag_version, buf->board_id);
+
+ return 0;
+ }
+
+ pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
+ name, tag_offset, buf->header_crc, computed_crc);
+ return -EINVAL;
+}
+
+static int bcm963xx_parse_imagetag_partitions(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ /* CFE, NVRAM and global Linux are always present */
+ int nrparts = 0, curpart = 0;
+ struct bcm_tag *buf = NULL;
+ struct mtd_partition *parts;
+ int ret;
+ unsigned int rootfsaddr, kerneladdr, spareaddr, offset;
+ unsigned int rootfslen, kernellen, sparelen, totallen;
+ int i;
+ bool rootfs_first = false;
+
+ buf = vmalloc(sizeof(struct bcm_tag));
+ if (!buf)
+ return -ENOMEM;
+
+ /* Get the tag */
+ ret = bcm963xx_read_imagetag(master, "rootfs", 0, buf);
+ if (!ret) {
+ STR_NULL_TERMINATE(buf->flash_image_start);
+ if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
+ rootfsaddr < BCM963XX_EXTENDED_SIZE) {
+ pr_err("invalid rootfs address: %*ph\n",
+ (int)sizeof(buf->flash_image_start),
+ buf->flash_image_start);
+ goto out;
+ }
+
+ STR_NULL_TERMINATE(buf->kernel_address);
+ if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
+ kerneladdr < BCM963XX_EXTENDED_SIZE) {
+ pr_err("invalid kernel address: %*ph\n",
+ (int)sizeof(buf->kernel_address),
+ buf->kernel_address);
+ goto out;
+ }
+
+ STR_NULL_TERMINATE(buf->kernel_length);
+ if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
+ pr_err("invalid kernel length: %*ph\n",
+ (int)sizeof(buf->kernel_length),
+ buf->kernel_length);
+ goto out;
+ }
+
+ STR_NULL_TERMINATE(buf->total_length);
+ if (kstrtouint(buf->total_length, 10, &totallen)) {
+ pr_err("invalid total length: %*ph\n",
+ (int)sizeof(buf->total_length),
+ buf->total_length);
+ goto out;
+ }
+
+ /*
+ * Addresses are flash absolute, so convert to partition
+ * relative addresses. Assume either kernel or rootfs will
+ * directly follow the image tag.
+ */
+ if (rootfsaddr < kerneladdr)
+ offset = rootfsaddr - sizeof(struct bcm_tag);
+ else
+ offset = kerneladdr - sizeof(struct bcm_tag);
+
+ kerneladdr = kerneladdr - offset;
+ rootfsaddr = rootfsaddr - offset;
+ spareaddr = roundup(totallen, master->erasesize);
+
+ if (rootfsaddr < kerneladdr) {
+ /* default Broadcom layout */
+ rootfslen = kerneladdr - rootfsaddr;
+ rootfs_first = true;
+ } else {
+ /* OpenWrt layout */
+ rootfsaddr = kerneladdr + kernellen;
+ rootfslen = spareaddr - rootfsaddr;
+ }
+ } else {
+ goto out;
+ }
+ sparelen = master->size - spareaddr;
+
+ /* Determine number of partitions */
+ if (rootfslen > 0)
+ nrparts++;
+
+ if (kernellen > 0)
+ nrparts++;
+
+ parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
+ if (!parts) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* Start building partition list */
+ if (kernellen > 0) {
+ int kernelpart = curpart;
+
+ if (rootfslen > 0 && rootfs_first)
+ kernelpart++;
+ parts[kernelpart].name = "kernel";
+ parts[kernelpart].offset = kerneladdr;
+ parts[kernelpart].size = kernellen;
+ curpart++;
+ }
+
+ if (rootfslen > 0) {
+ int rootfspart = curpart;
+
+ if (kernellen > 0 && rootfs_first)
+ rootfspart--;
+ parts[rootfspart].name = "rootfs";
+ parts[rootfspart].offset = rootfsaddr;
+ parts[rootfspart].size = rootfslen;
+ if (sparelen > 0 && !rootfs_first)
+ parts[rootfspart].size += sparelen;
+ curpart++;
+ }
+
+ for (i = 0; i < nrparts; i++)
+ pr_info("Partition %d is %s offset %llx and length %llx\n", i,
+ parts[i].name, parts[i].offset, parts[i].size);
+
+ pr_info("Spare partition is offset %x and length %x\n", spareaddr,
+ sparelen);
+
+ *pparts = parts;
+ ret = 0;
+
+out:
+ vfree(buf);
+
+ if (ret)
+ return ret;
+
+ return nrparts;
+}
+
+static const struct of_device_id parse_bcm963xx_imagetag_match_table[] = {
+ { .compatible = "brcm,bcm963xx-imagetag" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, parse_bcm963xx_imagetag_match_table);
+
+static struct mtd_part_parser bcm963xx_imagetag_parser = {
+ .parse_fn = bcm963xx_parse_imagetag_partitions,
+ .name = "bcm963xx-imagetag",
+ .of_match_table = parse_bcm963xx_imagetag_match_table,
+};
+module_mtd_part_parser(bcm963xx_imagetag_parser);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Daniel Dickinson <openwrt@cshore.neomailbox.net>");
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>");
+MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com>");
+MODULE_DESCRIPTION("MTD parser for BCM963XX CFE Image Tag partitions");
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index 89227b1d036a..e0955a98a0f4 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -222,17 +222,17 @@ static int sm_correct_sector(uint8_t *buffer, struct sm_oob *oob)
uint8_t ecc[3];
__nand_calculate_ecc(buffer, SM_SMALL_PAGE, ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
if (__nand_correct_data(buffer, ecc, oob->ecc1, SM_SMALL_PAGE,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC)) < 0)
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC)) < 0)
return -EIO;
buffer += SM_SMALL_PAGE;
__nand_calculate_ecc(buffer, SM_SMALL_PAGE, ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
if (__nand_correct_data(buffer, ecc, oob->ecc2, SM_SMALL_PAGE,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC)) < 0)
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC)) < 0)
return -EIO;
return 0;
}
@@ -399,11 +399,11 @@ restart:
if (ftl->smallpagenand) {
__nand_calculate_ecc(buf + boffset, SM_SMALL_PAGE,
oob.ecc1,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
__nand_calculate_ecc(buf + boffset + SM_SMALL_PAGE,
SM_SMALL_PAGE, oob.ecc2,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
}
if (!sm_write_sector(ftl, zone, block, boffset,
buf + boffset, &oob))
diff --git a/drivers/mtd/spi-nor/intel-spi-pci.c b/drivers/mtd/spi-nor/intel-spi-pci.c
index 872b40922608..bfbfc17ed6aa 100644
--- a/drivers/mtd/spi-nor/intel-spi-pci.c
+++ b/drivers/mtd/spi-nor/intel-spi-pci.c
@@ -63,6 +63,7 @@ static void intel_spi_pci_remove(struct pci_dev *pdev)
}
static const struct pci_device_id intel_spi_pci_ids[] = {
+ { PCI_VDEVICE(INTEL, 0x02a4), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x18e0), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x34a4), (unsigned long)&bxt_info },
diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c
index af0a22019516..d60cbf23d9aa 100644
--- a/drivers/mtd/spi-nor/intel-spi.c
+++ b/drivers/mtd/spi-nor/intel-spi.c
@@ -632,6 +632,10 @@ static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len,
while (len > 0) {
block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ);
+ /* Read cannot cross 4K boundary */
+ block_size = min_t(loff_t, from + block_size,
+ round_up(from + 1, SZ_4K)) - from;
+
writel(from, ispi->base + FADDR);
val = readl(ispi->base + HSFSTS_CTL);
@@ -685,6 +689,10 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len,
while (len > 0) {
block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ);
+ /* Write cannot cross 4K boundary */
+ block_size = min_t(loff_t, to + block_size,
+ round_up(to + 1, SZ_4K)) - to;
+
writel(to, ispi->base + FADDR);
val = readl(ispi->base + HSFSTS_CTL);
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index fae147452aff..73172d7f512b 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -744,7 +744,7 @@ spi_nor_find_best_erase_type(const struct spi_nor_erase_map *map,
u8 erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
/*
- * Erase types are ordered by size, with the biggest erase type at
+ * Erase types are ordered by size, with the smallest erase type at
* index 0.
*/
for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
@@ -1905,7 +1905,9 @@ static const struct flash_info spi_nor_ids[] = {
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
{ "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
+ { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | USE_CLSR) },
{ "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
@@ -2071,8 +2073,8 @@ static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
return &spi_nor_ids[tmp];
}
}
- dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
- id[0], id[1], id[2]);
+ dev_err(nor->dev, "unrecognized JEDEC id bytes: %*ph\n",
+ SPI_NOR_MAX_ID_LEN, id);
return ERR_PTR(-ENODEV);
}
diff --git a/drivers/mtd/tests/mtd_nandecctest.c b/drivers/mtd/tests/mtd_nandecctest.c
index c71523e94580..73b06304c975 100644
--- a/drivers/mtd/tests/mtd_nandecctest.c
+++ b/drivers/mtd/tests/mtd_nandecctest.c
@@ -21,7 +21,7 @@
* or detected.
*/
-#if IS_ENABLED(CONFIG_MTD_NAND)
+#if IS_ENABLED(CONFIG_MTD_RAW_NAND)
struct nand_ecc_test {
const char *name;
@@ -122,9 +122,9 @@ static int no_bit_error_verify(void *error_data, void *error_ecc,
int ret;
__nand_calculate_ecc(error_data, size, calc_ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
if (ret == 0 && !memcmp(correct_data, error_data, size))
return 0;
@@ -152,9 +152,9 @@ static int single_bit_error_correct(void *error_data, void *error_ecc,
int ret;
__nand_calculate_ecc(error_data, size, calc_ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
if (ret == 1 && !memcmp(correct_data, error_data, size))
return 0;
@@ -189,9 +189,9 @@ static int double_bit_error_detect(void *error_data, void *error_ecc,
int ret;
__nand_calculate_ecc(error_data, size, calc_ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
return (ret == -EBADMSG) ? 0 : -EINVAL;
}
@@ -266,7 +266,7 @@ static int nand_ecc_test_run(const size_t size)
prandom_bytes(correct_data, size);
__nand_calculate_ecc(correct_data, size, correct_ecc,
- IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+ IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
for (i = 0; i < ARRAY_SIZE(nand_ecc_test); i++) {
nand_ecc_test[i].prepare(error_data, error_ecc,
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 3102bd754d18..010bc5544c54 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -93,10 +93,7 @@ struct nand_bbt_descr {
#define NAND_BBT_WRITE 0x00002000
/* Read and write back block contents when writing bbt */
#define NAND_BBT_SAVECONTENT 0x00004000
-/* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE 0x00008000
-/* Search good / bad pattern on the last page of the eraseblock */
-#define NAND_BBT_SCANLASTPAGE 0x00010000
+
/*
* Use a flash based bad block table. By default, OOB identifier is saved in
* OOB area. This option is passed to the default bad block table function.
@@ -124,13 +121,6 @@ struct nand_bbt_descr {
#define NAND_BBT_SCAN_MAXBLOCKS 4
/*
- * Constants for oob configuration
- */
-#define NAND_SMALL_BADBLOCK_POS 5
-#define NAND_LARGE_BADBLOCK_POS 0
-#define ONENAND_BADBLOCK_POS 0
-
-/*
* Bad block scanning errors
*/
#define ONENAND_BBT_READ_ERROR 1
@@ -140,7 +130,6 @@ struct nand_bbt_descr {
/**
* struct bbm_info - [GENERIC] Bad Block Table data structure
* @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
- * @badblockpos: [INTERN] position of the bad block marker in the oob area
* @options: options for this descriptor
* @bbt: [INTERN] bad block table pointer
* @isbad_bbt: function to determine if a block is bad
@@ -150,7 +139,6 @@ struct nand_bbt_descr {
*/
struct bbm_info {
int bbt_erase_shift;
- int badblockpos;
int options;
uint8_t *bbt;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 7f53ece2c039..cebc38b6d6f5 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -19,6 +19,7 @@
* @oobsize: OOB area size
* @pages_per_eraseblock: number of pages per eraseblock
* @eraseblocks_per_lun: number of eraseblocks per LUN (Logical Unit Number)
+ * @max_bad_eraseblocks_per_lun: maximum number of eraseblocks per LUN
* @planes_per_lun: number of planes per LUN
* @luns_per_target: number of LUN per target (target is a synonym for die)
* @ntargets: total number of targets exposed by the NAND device
@@ -29,18 +30,20 @@ struct nand_memory_organization {
unsigned int oobsize;
unsigned int pages_per_eraseblock;
unsigned int eraseblocks_per_lun;
+ unsigned int max_bad_eraseblocks_per_lun;
unsigned int planes_per_lun;
unsigned int luns_per_target;
unsigned int ntargets;
};
-#define NAND_MEMORG(bpc, ps, os, ppe, epl, ppl, lpt, nt) \
+#define NAND_MEMORG(bpc, ps, os, ppe, epl, mbb, ppl, lpt, nt) \
{ \
.bits_per_cell = (bpc), \
.pagesize = (ps), \
.oobsize = (os), \
.pages_per_eraseblock = (ppe), \
.eraseblocks_per_lun = (epl), \
+ .max_bad_eraseblocks_per_lun = (mbb), \
.planes_per_lun = (ppl), \
.luns_per_target = (lpt), \
.ntargets = (nt), \
@@ -269,6 +272,20 @@ nanddev_pages_per_eraseblock(const struct nand_device *nand)
}
/**
+ * nanddev_pages_per_target() - Get the number of pages per target
+ * @nand: NAND device
+ *
+ * Return: the number of pages per target.
+ */
+static inline unsigned int
+nanddev_pages_per_target(const struct nand_device *nand)
+{
+ return nand->memorg.pages_per_eraseblock *
+ nand->memorg.eraseblocks_per_lun *
+ nand->memorg.luns_per_target;
+}
+
+/**
* nanddev_per_page_oobsize() - Get NAND erase block size
* @nand: NAND device
*
@@ -292,6 +309,18 @@ nanddev_eraseblocks_per_lun(const struct nand_device *nand)
}
/**
+ * nanddev_eraseblocks_per_target() - Get the number of eraseblocks per target
+ * @nand: NAND device
+ *
+ * Return: the number of eraseblocks per target.
+ */
+static inline unsigned int
+nanddev_eraseblocks_per_target(const struct nand_device *nand)
+{
+ return nand->memorg.eraseblocks_per_lun * nand->memorg.luns_per_target;
+}
+
+/**
* nanddev_target_size() - Get the total size provided by a single target/die
* @nand: NAND device
*
@@ -729,5 +758,6 @@ static inline bool nanddev_bbt_is_initialized(struct nand_device *nand)
/* MTD -> NAND helper functions. */
int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo);
+int nanddev_mtd_max_bad_blocks(struct mtd_info *mtd, loff_t offs, size_t len);
#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h
index b8106651f807..a8a6909b594e 100644
--- a/include/linux/mtd/nand_bch.h
+++ b/include/linux/mtd/nand_bch.h
@@ -15,7 +15,7 @@ struct mtd_info;
struct nand_chip;
struct nand_bch_control;
-#if defined(CONFIG_MTD_NAND_ECC_BCH)
+#if IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_BCH)
static inline int mtd_nand_has_bch(void) { return 1; }
@@ -39,7 +39,7 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd);
*/
void nand_bch_free(struct nand_bch_control *nbc);
-#else /* !CONFIG_MTD_NAND_ECC_BCH */
+#else /* !CONFIG_MTD_NAND_ECC_SW_BCH */
static inline int mtd_nand_has_bch(void) { return 0; }
@@ -64,6 +64,6 @@ static inline struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
static inline void nand_bch_free(struct nand_bch_control *nbc) {}
-#endif /* CONFIG_MTD_NAND_ECC_BCH */
+#endif /* CONFIG_MTD_NAND_ECC_SW_BCH */
#endif /* __MTD_NAND_BCH_H__ */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 0aaa98b219a4..bfe9e10fae04 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -94,6 +94,7 @@ struct onenand_chip {
unsigned int technology;
unsigned int density_mask;
unsigned int options;
+ unsigned int badblockpos;
unsigned int erase_shift;
unsigned int page_shift;
@@ -188,6 +189,8 @@ struct onenand_chip {
/* Check byte access in OneNAND */
#define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1)
+#define ONENAND_BADBLOCK_POS 0
+
/*
* Options bits
*/
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index b7445a44a814..dbfffa5bec7b 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -20,6 +20,7 @@
#include <linux/mtd/flashchip.h>
#include <linux/mtd/bbm.h>
#include <linux/mtd/jedec.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/onfi.h>
#include <linux/mutex.h>
#include <linux/of.h>
@@ -168,6 +169,21 @@ enum nand_ecc_algo {
/* Macros to identify the above */
#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
+/*
+ * There are different places where the manufacturer stores the factory bad
+ * block markers.
+ *
+ * Position within the block: Each of these pages needs to be checked for a
+ * bad block marking pattern.
+ */
+#define NAND_BBM_FIRSTPAGE 0x01000000
+#define NAND_BBM_SECONDPAGE 0x02000000
+#define NAND_BBM_LASTPAGE 0x04000000
+
+/* Position within the OOB data of the page */
+#define NAND_BBM_POS_SMALL 5
+#define NAND_BBM_POS_LARGE 0
+
/* Non chip related options */
/* This option skips the bbt scan during initialization. */
#define NAND_SKIP_BBTSCAN 0x00010000
@@ -805,7 +821,7 @@ struct nand_op_parser_pattern {
#define NAND_OP_PARSER_PATTERN(_exec, ...) \
{ \
.exec = _exec, \
- .elems = (struct nand_op_parser_pattern_elem[]) { __VA_ARGS__ }, \
+ .elems = (const struct nand_op_parser_pattern_elem[]) { __VA_ARGS__ }, \
.nelems = sizeof((struct nand_op_parser_pattern_elem[]) { __VA_ARGS__ }) / \
sizeof(struct nand_op_parser_pattern_elem), \
}
@@ -831,7 +847,7 @@ struct nand_op_parser {
#define NAND_OP_PARSER(...) \
{ \
- .patterns = (struct nand_op_parser_pattern[]) { __VA_ARGS__ }, \
+ .patterns = (const struct nand_op_parser_pattern[]) { __VA_ARGS__ }, \
.npatterns = sizeof((struct nand_op_parser_pattern[]) { __VA_ARGS__ }) / \
sizeof(struct nand_op_parser_pattern), \
}
@@ -860,6 +876,7 @@ struct nand_operation {
int nand_op_parser_exec_op(struct nand_chip *chip,
const struct nand_op_parser *parser,
const struct nand_operation *op, bool check_only);
+
/**
* struct nand_controller_ops - Controller operations
*
@@ -962,7 +979,7 @@ struct nand_legacy {
/**
* struct nand_chip - NAND Private Flash Chip Data
- * @mtd: MTD device registered to the MTD framework
+ * @base: Inherit from the generic NAND device
* @legacy: All legacy fields/hooks. If you develop a new driver,
* don't even try to use any of these fields/hooks, and if
* you're modifying an existing driver that is using those
@@ -990,37 +1007,26 @@ struct nand_legacy {
* @badblockbits: [INTERN] minimum number of set bits in a good block's
* bad block marker position; i.e., BBM == 11110111b is
* not bad when badblockbits == 7
- * @bits_per_cell: [INTERN] number of bits per cell. i.e., 1 means SLC.
- * @ecc_strength_ds: [INTERN] ECC correctability from the datasheet.
- * Minimum amount of bit errors per @ecc_step_ds guaranteed
- * to be correctable. If unknown, set to zero.
- * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds,
- * also from the datasheet. It is the recommended ECC step
- * size, if known; if unknown, set to zero.
* @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is
* set to the actually used ONFI mode if the chip is
* ONFI compliant or deduced from the datasheet if
* the NAND chip is not ONFI compliant.
- * @numchips: [INTERN] number of physical chips
- * @chipsize: [INTERN] the size of one chip for multichip arrays
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
* @data_buf: [INTERN] buffer for data, size is (page size + oobsize).
- * @pagebuf: [INTERN] holds the pagenumber which is currently in
- * data_buf.
- * @pagebuf_bitflips: [INTERN] holds the bitflip count for the page which is
- * currently in data_buf.
+ * @pagecache: Structure containing page cache related fields
+ * @pagecache.bitflips: Number of bitflips of the cached page
+ * @pagecache.page: Page number currently in the cache. -1 means no page is
+ * currently cached
* @subpagesize: [INTERN] holds the subpagesize
* @id: [INTERN] holds NAND ID
* @parameters: [INTERN] holds generic parameters under an easily
* readable form.
- * @max_bb_per_die: [INTERN] the max number of bad blocks each die of a
- * this nand device will encounter their life times.
- * @blocks_per_die: [INTERN] The number of PEBs in a die
* @data_interface: [INTERN] NAND interface timing information
* @cur_cs: currently selected target. -1 means no target selected,
* otherwise we should always have cur_cs >= 0 &&
- * cur_cs < numchips. NAND Controller drivers should not
- * modify this value, but they're allowed to read it.
+ * cur_cs < nanddev_ntargets(). NAND Controller drivers
+ * should not modify this value, but they're allowed to
+ * read it.
* @read_retries: [INTERN] the number of read retry modes supported
* @lock: lock protecting the suspended field. Also used to
* serialize accesses to the NAND device.
@@ -1041,7 +1047,7 @@ struct nand_legacy {
*/
struct nand_chip {
- struct mtd_info mtd;
+ struct nand_device base;
struct nand_legacy legacy;
@@ -1054,24 +1060,21 @@ struct nand_chip {
int phys_erase_shift;
int bbt_erase_shift;
int chip_shift;
- int numchips;
- uint64_t chipsize;
int pagemask;
u8 *data_buf;
- int pagebuf;
- unsigned int pagebuf_bitflips;
+
+ struct {
+ unsigned int bitflips;
+ int page;
+ } pagecache;
+
int subpagesize;
- uint8_t bits_per_cell;
- uint16_t ecc_strength_ds;
- uint16_t ecc_step_ds;
int onfi_timing_mode_default;
- int badblockpos;
+ unsigned int badblockpos;
int badblockbits;
struct nand_id id;
struct nand_parameters parameters;
- u16 max_bb_per_die;
- u32 blocks_per_die;
struct nand_data_interface data_interface;
@@ -1105,25 +1108,14 @@ struct nand_chip {
extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
-static inline void nand_set_flash_node(struct nand_chip *chip,
- struct device_node *np)
-{
- mtd_set_of_node(&chip->mtd, np);
-}
-
-static inline struct device_node *nand_get_flash_node(struct nand_chip *chip)
-{
- return mtd_get_of_node(&chip->mtd);
-}
-
static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
{
- return container_of(mtd, struct nand_chip, mtd);
+ return container_of(mtd, struct nand_chip, base.mtd);
}
static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip)
{
- return &chip->mtd;
+ return &chip->base.mtd;
}
static inline void *nand_get_controller_data(struct nand_chip *chip)
@@ -1147,6 +1139,17 @@ static inline void *nand_get_manufacturer_data(struct nand_chip *chip)
return chip->manufacturer.priv;
}
+static inline void nand_set_flash_node(struct nand_chip *chip,
+ struct device_node *np)
+{
+ mtd_set_of_node(nand_to_mtd(chip), np);
+}
+
+static inline struct device_node *nand_get_flash_node(struct nand_chip *chip)
+{
+ return mtd_get_of_node(nand_to_mtd(chip));
+}
+
/*
* A helper for defining older NAND chips where the second ID byte fully
* defined the chip, including the geometry (chip size, eraseblock size, page
@@ -1180,9 +1183,9 @@ static inline void *nand_get_manufacturer_data(struct nand_chip *chip)
* @name: a human-readable name of the NAND chip
* @dev_id: the device ID (the second byte of the full chip ID array)
* @mfr_id: manufecturer ID part of the full chip ID array (refers the same
- * memory address as @id[0])
+ * memory address as ``id[0]``)
* @dev_id: device ID part of the full chip ID array (refers the same memory
- * address as @id[1])
+ * address as ``id[1]``)
* @id: full device ID array
* @pagesize: size of the NAND page in bytes; if 0, then the real page size (as
* well as the eraseblock size) is determined from the extended NAND
@@ -1235,9 +1238,9 @@ int nand_create_bbt(struct nand_chip *chip);
*/
static inline bool nand_is_slc(struct nand_chip *chip)
{
- WARN(chip->bits_per_cell == 0,
+ WARN(nanddev_bits_per_cell(&chip->base) == 0,
"chip->bits_per_cell is used uninitialized\n");
- return chip->bits_per_cell == 1;
+ return nanddev_bits_per_cell(&chip->base) == 1;
}
/**
@@ -1348,4 +1351,25 @@ int nand_gpio_waitrdy(struct nand_chip *chip, struct gpio_desc *gpiod,
void nand_select_target(struct nand_chip *chip, unsigned int cs);
void nand_deselect_target(struct nand_chip *chip);
+/**
+ * nand_get_data_buf() - Get the internal page buffer
+ * @chip: NAND chip object
+ *
+ * Returns the pre-allocated page buffer after invalidating the cache. This
+ * function should be used by drivers that do not want to allocate their own
+ * bounce buffer and still need such a buffer for specific operations (most
+ * commonly when reading OOB data only).
+ *
+ * Be careful to never call this function in the write/write_oob path, because
+ * the core may have placed the data to be written out in this buffer.
+ *
+ * Return: pointer to the page cache buffer
+ */
+static inline void *nand_get_data_buf(struct nand_chip *chip)
+{
+ chip->pagecache.page = -1;
+
+ return chip->data_buf;
+}
+
#endif /* __LINUX_MTD_RAWNAND_H */
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index b92e2aa955b6..507f7e289bd1 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -302,6 +302,11 @@ struct spinand_info {
__VA_ARGS__ \
}
+struct spinand_dirmap {
+ struct spi_mem_dirmap_desc *wdesc;
+ struct spi_mem_dirmap_desc *rdesc;
+};
+
/**
* struct spinand_device - SPI NAND device instance
* @base: NAND device instance
@@ -341,6 +346,8 @@ struct spinand_device {
const struct spi_mem_op *update_cache;
} op_templates;
+ struct spinand_dirmap *dirmaps;
+
int (*select_target)(struct spinand_device *spinand,
unsigned int target);
unsigned int cur_target;
diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h
index b8686c00f15f..fef4b081b736 100644
--- a/include/linux/platform_data/elm.h
+++ b/include/linux/platform_data/elm.h
@@ -60,6 +60,6 @@ static inline int elm_config(struct device *dev, enum bch_ecc bch_type,
{
return -ENOSYS;
}
-#endif /* CONFIG_MTD_NAND_ECC_BCH */
+#endif /* CONFIG_MTD_NAND_OMAP_BCH */
#endif /* __ELM_H */
diff --git a/include/soc/at91/atmel-sfr.h b/include/soc/at91/atmel-sfr.h
index 482337af06b8..532fd784e86c 100644
--- a/include/soc/at91/atmel-sfr.h
+++ b/include/soc/at91/atmel-sfr.h
@@ -14,21 +14,41 @@
#define _LINUX_MFD_SYSCON_ATMEL_SFR_H
#define AT91_SFR_DDRCFG 0x04 /* DDR Configuration Register */
+#define AT91_SFR_CCFG_EBICSA 0x04 /* EBI Chip Select Register */
/* 0x08 ~ 0x0c: Reserved */
#define AT91_SFR_OHCIICR 0x10 /* OHCI INT Configuration Register */
#define AT91_SFR_OHCIISR 0x14 /* OHCI INT Status Register */
#define AT91_SFR_UTMICKTRIM 0x30 /* UTMI Clock Trimming Register */
+#define AT91_SFR_UTMISWAP 0x3c /* UTMI DP/DM Pin Swapping Register */
+#define AT91_SFR_LS 0x7c /* Light Sleep Register */
#define AT91_SFR_I2SCLKSEL 0x90 /* I2SC Register */
+#define AT91_SFR_WPMR 0xe4 /* Write Protection Mode Register */
/* Field definitions */
-#define AT91_OHCIICR_SUSPEND_A BIT(8)
-#define AT91_OHCIICR_SUSPEND_B BIT(9)
-#define AT91_OHCIICR_SUSPEND_C BIT(10)
+#define AT91_SFR_CCFG_EBI_CSA(cs, val) ((val) << (cs))
+#define AT91_SFR_CCFG_EBI_DBPUC BIT(8)
+#define AT91_SFR_CCFG_EBI_DBPDC BIT(9)
+#define AT91_SFR_CCFG_EBI_DRIVE BIT(17)
+#define AT91_SFR_CCFG_NFD0_ON_D16 BIT(24)
+#define AT91_SFR_CCFG_DDR_MP_EN BIT(25)
-#define AT91_OHCIICR_USB_SUSPEND (AT91_OHCIICR_SUSPEND_A | \
- AT91_OHCIICR_SUSPEND_B | \
- AT91_OHCIICR_SUSPEND_C)
+#define AT91_SFR_OHCIICR_RES(x) BIT(x)
+#define AT91_SFR_OHCIICR_ARIE BIT(4)
+#define AT91_SFR_OHCIICR_APPSTART BIT(5)
+#define AT91_SFR_OHCIICR_USB_SUSP(x) BIT(8 + (x))
+#define AT91_SFR_OHCIICR_UDPPUDIS BIT(23)
+#define AT91_OHCIICR_USB_SUSPEND GENMASK(10, 8)
-#define AT91_UTMICKTRIM_FREQ GENMASK(1, 0)
+#define AT91_SFR_OHCIISR_RIS(x) BIT(x)
+
+#define AT91_UTMICKTRIM_FREQ GENMASK(1, 0)
+
+#define AT91_SFR_UTMISWAP_PORT(x) BIT(x)
+
+#define AT91_SFR_LS_VALUE(x) BIT(x)
+#define AT91_SFR_LS_MEM_POWER_GATING_ULP1_EN BIT(16)
+
+#define AT91_SFR_WPMR_WPEN BIT(0)
+#define AT91_SFR_WPMR_WPKEY_MASK GENMASK(31, 8)
#endif /* _LINUX_MFD_SYSCON_ATMEL_SFR_H */