diff options
author | Heiner Kallweit <hkallweit1@gmail.com> | 2015-09-29 23:15:53 +0200 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2015-10-05 14:55:56 +0100 |
commit | 0037686596832572bbca05ab168d9884d7d704c1 (patch) | |
tree | 9f48ab292c90a97303f1a88359e488591cd00f75 | |
parent | e30d8f23926b70a003d9fb16b49bfe23f01269da (diff) | |
download | linux-0037686596832572bbca05ab168d9884d7d704c1.tar.bz2 |
spi: bitbang: switch to the generic implementation of transfer_one_message
Change the bitbang driver to use the generic implementation of
transfer_one_message. This simplifies the bitbang driver code and
provides benefits like the statistics in the generic implementation.
Successfully tested on a IMX6-based system (spi-imx) and on a MIPS-based
router (OpenWRT with spi-ath79).
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
-rw-r--r-- | drivers/spi/spi-bitbang.c | 125 |
1 files changed, 36 insertions, 89 deletions
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index ad3168dc45e7..3aa9e6e3dac8 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -24,6 +24,8 @@ #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> +#define SPI_BITBANG_CS_DELAY 100 + /*----------------------------------------------------------------------*/ @@ -265,100 +267,28 @@ static int spi_bitbang_prepare_hardware(struct spi_master *spi) } static int spi_bitbang_transfer_one(struct spi_master *master, - struct spi_message *m) + struct spi_device *spi, + struct spi_transfer *transfer) { - struct spi_bitbang *bitbang; - unsigned nsecs; - struct spi_transfer *t = NULL; - unsigned cs_change; - int status; - struct spi_device *spi = m->spi; - - bitbang = spi_master_get_devdata(master); - - /* FIXME this is made-up ... the correct value is known to - * word-at-a-time bitbang code, and presumably chipselect() - * should enforce these requirements too? - */ - nsecs = 100; - - cs_change = 1; - status = 0; - - list_for_each_entry(t, &m->transfers, transfer_list) { - - if (bitbang->setup_transfer) { - status = bitbang->setup_transfer(spi, t); - if (status < 0) - break; - } - - /* set up default clock polarity, and activate chip; - * this implicitly updates clock and spi modes as - * previously recorded for this device via setup(). - * (and also deselects any other chip that might be - * selected ...) - */ - if (cs_change) { - bitbang->chipselect(spi, BITBANG_CS_ACTIVE); - ndelay(nsecs); - } - cs_change = t->cs_change; - if (!t->tx_buf && !t->rx_buf && t->len) { - status = -EINVAL; - break; - } - - /* transfer data. the lower level code handles any - * new dma mappings it needs. our caller always gave - * us dma-safe buffers. - */ - if (t->len) { - /* REVISIT dma API still needs a designated - * DMA_ADDR_INVALID; ~0 might be better. - */ - if (!m->is_dma_mapped) - t->rx_dma = t->tx_dma = 0; - status = bitbang->txrx_bufs(spi, t); - } - if (status > 0) - m->actual_length += status; - if (status != t->len) { - /* always report some kind of error */ - if (status >= 0) - status = -EREMOTEIO; - break; - } - status = 0; + struct spi_bitbang *bitbang = spi_master_get_devdata(master); + int status = 0; - /* protocol tweaks before next transfer */ - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (cs_change && - !list_is_last(&t->transfer_list, &m->transfers)) { - /* sometimes a short mid-message deselect of the chip - * may be needed to terminate a mode or command - */ - ndelay(nsecs); - bitbang->chipselect(spi, BITBANG_CS_INACTIVE); - ndelay(nsecs); - } + if (bitbang->setup_transfer) { + status = bitbang->setup_transfer(spi, transfer); + if (status < 0) + goto out; } - m->status = status; + if (transfer->len) + status = bitbang->txrx_bufs(spi, transfer); - /* normally deactivate chipselect ... unless no error and - * cs_change has hinted that the next message will probably - * be for this chip too. - */ - if (!(status == 0 && cs_change)) { - ndelay(nsecs); - bitbang->chipselect(spi, BITBANG_CS_INACTIVE); - ndelay(nsecs); - } + if (status == transfer->len) + status = 0; + else if (status >= 0) + status = -EREMOTEIO; - spi_finalize_current_message(master); +out: + spi_finalize_current_transfer(master); return status; } @@ -376,6 +306,22 @@ static int spi_bitbang_unprepare_hardware(struct spi_master *spi) return 0; } +static void spi_bitbang_set_cs(struct spi_device *spi, bool enable) +{ + struct spi_bitbang *bitbang = spi_master_get_devdata(spi->master); + + /* SPI core provides CS high / low, but bitbang driver + * expects CS active + * spi device driver takes care of handling SPI_CS_HIGH + */ + enable = (!!(spi->mode & SPI_CS_HIGH) == enable); + + ndelay(SPI_BITBANG_CS_DELAY); + bitbang->chipselect(spi, enable ? BITBANG_CS_ACTIVE : + BITBANG_CS_INACTIVE); + ndelay(SPI_BITBANG_CS_DELAY); +} + /*----------------------------------------------------------------------*/ /** @@ -424,7 +370,8 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) master->prepare_transfer_hardware = spi_bitbang_prepare_hardware; master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware; - master->transfer_one_message = spi_bitbang_transfer_one; + master->transfer_one = spi_bitbang_transfer_one; + master->set_cs = spi_bitbang_set_cs; if (!bitbang->txrx_bufs) { bitbang->use_dma = 0; |