diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-10-29 10:17:52 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-10-29 10:17:52 -0700 |
commit | 37cc6bb8f28aee667835a97b4d00e6a20e0e4b62 (patch) | |
tree | 86c8ad77595af96b5c9123a8664448956beb59a8 | |
parent | 9af6f26a1a7f152f7736c0c20247eef0ab3df190 (diff) | |
parent | d0f4bce2bce7e998abc906f3590e9032af7a41ba (diff) | |
download | linux-37cc6bb8f28aee667835a97b4d00e6a20e0e4b62.tar.bz2 |
Merge tag 'tty-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for reported
issues for 4.9-rc3. Nothing major, but they do resolve a bunch of
problems with the tty core changes that are in 4.9-rc1, and finally
the atmel serial driver is back working properly.
All have been in linux-next with no reported issues"
* tag 'tty-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial_core: fix NULL struct tty pointer access in uart_write_wakeup
tty: serial_core: Fix serial console crash on port shutdown
tty/serial: at91: fix hardware handshake on Atmel platforms
vt: clear selection before resizing
sc16is7xx: always write state when configuring GPIO as an output
sh-sci: document R8A7743/5 support
tty: serial: 8250: 8250_core: NXP SC16C2552 workaround
tty: limit terminal size to 4M chars
tty: serial: fsl_lpuart: Fix Tx DMA edge case
serial: 8250_lpss: enable MSI for sure
serial: core: fix console problems on uart_close
serial: 8250_uniphier: fix clearing divisor latch access bit
serial: 8250_uniphier: fix more unterminated string
serial: pch_uart: add terminate entry for dmi_system_id tables
devicetree: bindings: uart: Add new compatible string for ZynqMP
serial: xuartps: Add new compatible string for ZynqMP
serial: SERIAL_STM32 should depend on HAS_DMA
serial: stm32: Fix comparisons with undefined register
tty: vt, fix bogus division in csi_J
-rw-r--r-- | Documentation/devicetree/bindings/serial/cdns,uart.txt | 4 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 8 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_lpss.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 3 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_uniphier.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/Kconfig | 1 | ||||
-rw-r--r-- | drivers/tty/serial/atmel_serial.c | 26 | ||||
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 3 | ||||
-rw-r--r-- | drivers/tty/serial/pch_uart.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/sc16is7xx.c | 8 | ||||
-rw-r--r-- | drivers/tty/serial/serial_core.c | 8 | ||||
-rw-r--r-- | drivers/tty/serial/stm32-usart.h | 2 | ||||
-rw-r--r-- | drivers/tty/serial/xilinx_uartps.c | 2 | ||||
-rw-r--r-- | drivers/tty/vt/vt.c | 7 |
14 files changed, 60 insertions, 19 deletions
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.txt b/Documentation/devicetree/bindings/serial/cdns,uart.txt index a3eb154c32ca..227bb770b027 100644 --- a/Documentation/devicetree/bindings/serial/cdns,uart.txt +++ b/Documentation/devicetree/bindings/serial/cdns,uart.txt @@ -1,7 +1,9 @@ Binding for Cadence UART Controller Required properties: -- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps" +- compatible : + Use "xlnx,xuartps","cdns,uart-r1p8" for Zynq-7xxx SoC. + Use "xlnx,zynqmp-uart","cdns,uart-r1p12" for Zynq Ultrascale+ MPSoC. - reg: Should contain UART controller registers location and length. - interrupts: Should contain UART controller interrupts. - clocks: Must contain phandles to the UART clocks diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 1e4000d83aee..8d27d1a603e7 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -9,6 +9,14 @@ Required properties: - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART. - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART. - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART. + - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART. + - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART. + - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART. + - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART. + - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART. + - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART. + - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART. + - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index 886fcf37f291..b9923464599f 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -213,7 +213,7 @@ static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port) struct pci_dev *pdev = to_pci_dev(port->dev); int ret; - ret = pci_alloc_irq_vectors(pdev, 1, 1, 0); + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); if (ret < 0) return ret; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 1bfb6fdbaa20..1731b98d2471 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -83,7 +83,8 @@ static const struct serial8250_config uart_config[] = { .name = "16550A", .fifo_size = 16, .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, .rxtrig_bytes = {1, 4, 8, 14}, .flags = UART_CAP_FIFO, }, diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c index b8d9c8c9d02a..417d9e7038e1 100644 --- a/drivers/tty/serial/8250/8250_uniphier.c +++ b/drivers/tty/serial/8250/8250_uniphier.c @@ -99,7 +99,7 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value) case UART_LCR: valshift = UNIPHIER_UART_LCR_SHIFT; /* Divisor latch access bit does not exist. */ - value &= ~(UART_LCR_DLAB << valshift); + value &= ~UART_LCR_DLAB; /* fall through */ case UART_MCR: offset = UNIPHIER_UART_LCR_MCR; @@ -199,7 +199,7 @@ static int uniphier_uart_probe(struct platform_device *pdev) regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) { - dev_err(dev, "failed to get memory resource"); + dev_err(dev, "failed to get memory resource\n"); return -EINVAL; } diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index c7831407a882..25c1d7bc0100 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1625,6 +1625,7 @@ config SERIAL_SPRD_CONSOLE config SERIAL_STM32 tristate "STMicroelectronics STM32 serial port support" select SERIAL_CORE + depends on HAS_DMA depends on ARM || COMPILE_TEST help This driver is for the on-chip Serial Controller on diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index fd8aa1f4ba78..168b10cad47b 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -2132,11 +2132,29 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, mode |= ATMEL_US_USMODE_RS485; } else if (termios->c_cflag & CRTSCTS) { /* RS232 with hardware handshake (RTS/CTS) */ - if (atmel_use_dma_rx(port) && !atmel_use_fifo(port)) { - dev_info(port->dev, "not enabling hardware flow control because DMA is used"); - termios->c_cflag &= ~CRTSCTS; - } else { + if (atmel_use_fifo(port) && + !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) { + /* + * with ATMEL_US_USMODE_HWHS set, the controller will + * be able to drive the RTS pin high/low when the RX + * FIFO is above RXFTHRES/below RXFTHRES2. + * It will also disable the transmitter when the CTS + * pin is high. + * This mode is not activated if CTS pin is a GPIO + * because in this case, the transmitter is always + * disabled (there must be an internal pull-up + * responsible for this behaviour). + * If the RTS pin is a GPIO, the controller won't be + * able to drive it according to the FIFO thresholds, + * but it will be handled by the driver. + */ mode |= ATMEL_US_USMODE_HWHS; + } else { + /* + * For platforms without FIFO, the flow control is + * handled by the driver. + */ + mode |= ATMEL_US_USMODE_NORMAL; } } else { /* RS232 without hadware handshake */ diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index de9d5107c00a..76103f2c4a80 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -328,7 +328,7 @@ static void lpuart_dma_tx(struct lpuart_port *sport) sport->dma_tx_bytes = uart_circ_chars_pending(xmit); - if (xmit->tail < xmit->head) { + if (xmit->tail < xmit->head || xmit->head == 0) { sport->dma_tx_nents = 1; sg_init_one(sgl, xmit->buf + xmit->tail, sport->dma_tx_bytes); } else { @@ -359,7 +359,6 @@ static void lpuart_dma_tx(struct lpuart_port *sport) sport->dma_tx_in_progress = true; sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc); dma_async_issue_pending(sport->dma_tx_chan); - } static void lpuart_dma_tx_complete(void *arg) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index d391650b82e7..42caccb5e87e 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -419,6 +419,7 @@ static struct dmi_system_id pch_uart_dmi_table[] = { }, (void *)MINNOW_UARTCLK, }, + { } }; /* Return UART clock, checking for board specific clocks. */ diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 2675792a8f59..fb0672554123 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1130,9 +1130,13 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, { struct sc16is7xx_port *s = gpiochip_get_data(chip); struct uart_port *port = &s->p[0].port; + u8 state = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG); - sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset), - val ? BIT(offset) : 0); + if (val) + state |= BIT(offset); + else + state &= ~BIT(offset); + sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state); sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), BIT(offset)); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 6e4f63627479..f2303f390345 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -111,7 +111,7 @@ void uart_write_wakeup(struct uart_port *port) * closed. No cookie for you. */ BUG_ON(!state); - tty_wakeup(state->port.tty); + tty_port_tty_wakeup(&state->port); } static void uart_stop(struct tty_struct *tty) @@ -632,7 +632,7 @@ static void uart_flush_buffer(struct tty_struct *tty) if (port->ops->flush_buffer) port->ops->flush_buffer(port); uart_port_unlock(port, flags); - tty_wakeup(tty); + tty_port_tty_wakeup(&state->port); } /* @@ -2746,8 +2746,6 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) uport->cons = drv->cons; uport->minor = drv->tty_driver->minor_start + uport->line; - port->console = uart_console(uport); - /* * If this port is a console, then the spinlock is already * initialised. @@ -2761,6 +2759,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) uart_configure_port(drv, state, uport); + port->console = uart_console(uport); + num_groups = 2; if (uport->attr_group) num_groups++; diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h index 41d974923102..cd97ceb76e4f 100644 --- a/drivers/tty/serial/stm32-usart.h +++ b/drivers/tty/serial/stm32-usart.h @@ -31,7 +31,7 @@ struct stm32_usart_info { struct stm32_usart_config cfg; }; -#define UNDEF_REG ~0 +#define UNDEF_REG 0xff /* Register offsets */ struct stm32_usart_info stm32f4_info = { diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index f37edaa5ac75..dd4c02fa4820 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1200,6 +1200,7 @@ static int __init cdns_early_console_setup(struct earlycon_device *device, OF_EARLYCON_DECLARE(cdns, "xlnx,xuartps", cdns_early_console_setup); OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup); OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup); +OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup); /** * cdns_uart_console_write - perform write operation @@ -1438,6 +1439,7 @@ static const struct of_device_id cdns_uart_of_match[] = { { .compatible = "xlnx,xuartps", }, { .compatible = "cdns,uart-r1p8", }, { .compatible = "cdns,uart-r1p12", .data = &zynqmp_uart_def }, + { .compatible = "xlnx,zynqmp-uart", .data = &zynqmp_uart_def }, {} }; MODULE_DEVICE_TABLE(of, cdns_uart_of_match); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 06fb39c1d6dd..8c3bf3d613c0 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -870,10 +870,15 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, if (new_cols == vc->vc_cols && new_rows == vc->vc_rows) return 0; + if (new_screen_size > (4 << 20)) + return -EINVAL; newscreen = kmalloc(new_screen_size, GFP_USER); if (!newscreen) return -ENOMEM; + if (vc == sel_cons) + clear_selection(); + old_rows = vc->vc_rows; old_row_size = vc->vc_size_row; @@ -1176,7 +1181,7 @@ static void csi_J(struct vc_data *vc, int vpar) break; case 3: /* erase scroll-back buffer (and whole display) */ scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char, - vc->vc_screenbuf_size >> 1); + vc->vc_screenbuf_size); set_origin(vc); if (con_is_visible(vc)) update_screen(vc); |