summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2019-01-10 07:59:16 -0800
committerWolfram Sang <wsa@the-dreams.de>2019-02-05 13:13:20 +0100
commitc6e2bd956936d925748581e4d0294f10f1d92f2c (patch)
treed8044f5ea8f2a9d68d8b54bee29d01d40e5ab805
parent8834f5600cf3c8db365e18a3d5cac2c2780c81e5 (diff)
downloadlinux-c6e2bd956936d925748581e4d0294f10f1d92f2c.tar.bz2
i2c: omap: Use noirq system sleep pm ops to idle device for suspend
We currently get the following error with pixcir_ts driver during a suspend resume cycle: omap_i2c 4802a000.i2c: controller timed out pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34 : -110 pixcir_ts 1-005c: Failed to disable interrupt generation: -110 pixcir_ts 1-005c: Failed to stop dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98 [pixcir_i2c_ts] returns -110 PM: Device 1-005c failed to resume: error -110 And at least am437x based devices with pixcir_ts will fail to resume to a touchscreen that is configured as the wakeup-source in device tree for these devices. This is because pixcir_ts tries to reconfigure it's registers for noirq suspend which fails. This also leaves i2c-omap in enabled state for suspend. Let's fix the pixcir_ts issue and make sure i2c-omap is suspended by adding SET_NOIRQ_SYSTEM_SLEEP_PM_OPS. Let's also get rid of some ifdefs while at it and replace them with __maybe_unused as SET_RUNTIME_PM_OPS and SET_NOIRQ_SYSTEM_SLEEP_PM_OPS already deal with the various PM Kconfig options. Reported-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-rw-r--r--drivers/i2c/busses/i2c-omap.c13
1 files changed, 5 insertions, 8 deletions
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index b1086bfb0465..cd9c65f3d404 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1500,8 +1500,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-static int omap_i2c_runtime_suspend(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_suspend(struct device *dev)
{
struct omap_i2c_dev *omap = dev_get_drvdata(dev);
@@ -1527,7 +1526,7 @@ static int omap_i2c_runtime_suspend(struct device *dev)
return 0;
}
-static int omap_i2c_runtime_resume(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_resume(struct device *dev)
{
struct omap_i2c_dev *omap = dev_get_drvdata(dev);
@@ -1542,20 +1541,18 @@ static int omap_i2c_runtime_resume(struct device *dev)
}
static const struct dev_pm_ops omap_i2c_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
omap_i2c_runtime_resume, NULL)
};
-#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
-#else
-#define OMAP_I2C_PM_OPS NULL
-#endif /* CONFIG_PM */
static struct platform_driver omap_i2c_driver = {
.probe = omap_i2c_probe,
.remove = omap_i2c_remove,
.driver = {
.name = "omap_i2c",
- .pm = OMAP_I2C_PM_OPS,
+ .pm = &omap_i2c_pm_ops,
.of_match_table = of_match_ptr(omap_i2c_of_match),
},
};