diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-04-05 13:51:19 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-04-05 13:51:19 -0700 |
| commit | dfc25e4503aef6b82a1de4a0fbe19aafa8648fbe (patch) | |
| tree | 0a4f3a07e2286918298e635186e42726f4658cbd | |
| parent | 9f800363bb0ea459e15bef0928a72c88d374e489 (diff) | |
| parent | 8f881c67368f82d0e20e1072b50b21132cc2440d (diff) | |
| download | linux-dfc25e4503aef6b82a1de4a0fbe19aafa8648fbe.tar.bz2 | |
Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"These cleanup patches are mainly move stuff around and should all be
harmless. They are mainly split out so that other branches can be
based on top to avoid conflicts.
Notable changes are:
- We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
longer used (Uwe Kleine-König)
- The Qualcomm MSM platform is split out into legacy mach-msm and
new-style mach-qcom, to allow easier maintainance of the new
hardware support without regressions (Kumar Gala)
- A rework of some of the Kconfig logic to simplify multiplatform
support (Rob Herring)
- Samsung Exynos gets closer to supporting multiplatform (Sachin
Kamat and others)
- mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
- at91 gains some common clock framework support (Alexandre Belloni,
Jean-Jacques Hiblot and other French people)"
* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
ARM: hisi: select HAVE_ARM_SCU only for SMP
ARM: efm32: allow uncompress debug output
ARM: prima2: build reset code standalone
ARM: at91: add PWM clock
ARM: at91: move sam9261 SoC to common clk
ARM: at91: prepare common clk transition for sam9261 SoC
ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
ARM: at91: dt: Add at91sam9261 dt SoC support
ARM: at91: switch sam9rl to common clock framework
ARM: at91/dt: define main clk frequency of at91sam9rlek
ARM: at91/dt: define at91sam9rl clocks
ARM: at91: prepare common clk transition for sam9rl SoCs
ARM: at91: prepare sam9 dt boards transition to common clk
ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
ARM: at91: Add at91sam9rl DT SoC support
ARM: at91: prepare at91sam9rl DT transition
ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
...
261 files changed, 2696 insertions, 1832 deletions
diff --git a/Documentation/devicetree/bindings/reset/sirf,rstc.txt b/Documentation/devicetree/bindings/reset/sirf,rstc.txt new file mode 100644 index 000000000000..0505de742d30 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/sirf,rstc.txt @@ -0,0 +1,42 @@ +CSR SiRFSoC Reset Controller +====================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "sirf,prima2-rstc" or "sirf,marco-rstc" +- reg: should be register base and length as documented in the + datasheet +- #reset-cells: 1, see below + +example: + +rstc: reset-controller@88010000 { + compatible = "sirf,prima2-rstc"; + reg = <0x88010000 0x1000>; + #reset-cells = <1>; +}; + +Specifying reset lines connected to IP modules +============================================== + +The reset controller(rstc) manages various reset sources. This module provides +reset signals for most blocks in system. Those device nodes should specify the +reset line on the rstc in their resets property, containing a phandle to the +rstc device node and a RESET_INDEX specifying which module to reset, as described +in reset.txt. + +For SiRFSoC, RESET_INDEX is just reset_bit defined in SW_RST0 and SW_RST1 registers. +For modules whose rest_bit is in SW_RST0, its RESET_INDEX is 0~31. For modules whose +rest_bit is in SW_RST1, its RESET_INDEX is 32~63. + +example: + +vpp@90020000 { + compatible = "sirf,prima2-vpp"; + reg = <0x90020000 0x10000>; + interrupts = <31>; + clocks = <&clks 35>; + resets = <&rstc 6>; +}; diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index 9c5d19ac935c..17c1042b2df8 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -13,6 +13,8 @@ Required properties: Optional properties: - atmel,use-dma-rx: use of PDC or DMA for receiving data - atmel,use-dma-tx: use of PDC or DMA for transmitting data +- rts-gpios: specify a GPIO for RTS line. It will use specified PIO instead of the peripheral + function pin for the USART RTS feature. If unsure, don't specify this property. - add dma bindings for dma transfer: - dmas: DMA specifier, consisting of a phandle to DMA controller node, memory peripheral interface and USART DMA channel ID, FIFO configuration. @@ -33,6 +35,7 @@ Example: clock-names = "usart"; atmel,use-dma-rx; atmel,use-dma-tx; + rts-gpios = <&pioD 15 0>; }; - use DMA: diff --git a/MAINTAINERS b/MAINTAINERS index ebb6c6f30c56..74e33b8913bf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1175,6 +1175,14 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.arm.linux.org.uk/ S: Maintained +ARM/QUALCOMM SUPPORT +M: Kumar Gala <galak@codeaurora.org> +M: David Brown <davidb@codeaurora.org> +L: linux-arm-msm@vger.kernel.org +S: Maintained +F: arch/arm/mach-qcom/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git + ARM/RADISYS ENP2611 MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -1894,7 +1902,7 @@ M: Stephen Warren <swarren@wwwdotorg.org> L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git S: Maintained -F: arch/arm/mach-bcm2835/ +F: arch/arm/mach-bcm/board_bcm2835.c F: arch/arm/boot/dts/bcm2835* F: arch/arm/configs/bcm2835_defconfig F: drivers/*/*bcm2835* diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 79bea0b34d1f..83912d0251ca 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -309,9 +309,11 @@ choice config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" depends on MMU + select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR select COMMON_CLK + select GENERIC_CLOCKEVENTS select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF @@ -425,9 +427,6 @@ config ARCH_EFM32 select ARCH_REQUIRE_GPIOLIB select AUTO_ZRELADDR select ARM_NVIC - # CLKSRC_MMIO is wrong here, but needed until a proper fix is merged, - # i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO - select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK select CPU_V7M @@ -659,9 +658,8 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MSM_NODT - bool "Qualcomm MSM" - select ARCH_MSM +config ARCH_MSM + bool "Qualcomm MSM (non-multiplatform)" select ARCH_REQUIRE_GPIOLIB select COMMON_CLK select GENERIC_CLOCKEVENTS @@ -921,16 +919,18 @@ config ARCH_MULTI_V4_V5 config ARCH_MULTI_V6 bool "ARMv6 based platforms (ARM11)" select ARCH_MULTI_V6_V7 - select CPU_V6 + select CPU_V6K config ARCH_MULTI_V7 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 select CPU_V7 + select HAVE_SMP config ARCH_MULTI_V6_V7 bool + select MIGHT_HAVE_CACHE_L2X0 config ARCH_MULTI_CPU_AUTO def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) @@ -938,6 +938,13 @@ config ARCH_MULTI_CPU_AUTO endmenu +config ARCH_VIRT + bool "Dummy Virtual Machine" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + # # This is sorted alphabetically by mach-* pathname. However, plat-* # Kconfigs may be included either alphabetically (according to the @@ -949,8 +956,6 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm/Kconfig" -source "arch/arm/mach-bcm2835/Kconfig" - source "arch/arm/mach-berlin/Kconfig" source "arch/arm/mach-clps711x/Kconfig" @@ -1018,6 +1023,8 @@ source "arch/arm/plat-pxa/Kconfig" source "arch/arm/mach-mmp/Kconfig" +source "arch/arm/mach-qcom/Kconfig" + source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-rockchip/Kconfig" @@ -1061,8 +1068,6 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/plat-versatile/Kconfig" -source "arch/arm/mach-virt/Kconfig" - source "arch/arm/mach-vt8500/Kconfig" source "arch/arm/mach-w90x900/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0531da8e5216..76ee27829c34 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -956,7 +956,7 @@ config DEBUG_STI_UART config DEBUG_MSM_UART bool - depends on ARCH_MSM + depends on ARCH_MSM || ARCH_QCOM config DEBUG_LL_INCLUDE string @@ -1145,7 +1145,7 @@ config DEBUG_UART_8250_FLOW_CONTROL config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM || ARCH_MSM + depends on ARCH_MULTIPLATFORM || ARCH_MSM || ARCH_EXYNOS default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help @@ -1161,7 +1161,8 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string - default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM + default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ + ARCH_EXYNOS || ARCH_EFM32 default "mach/uncompress.h" config EARLY_PRINTK diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fddf4beaee45..41c1931f0155 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -143,7 +143,6 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_BCM) += bcm -machine-$(CONFIG_ARCH_BCM2835) += bcm2835 machine-$(CONFIG_ARCH_BERLIN) += berlin machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx @@ -180,6 +179,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell machine-$(CONFIG_ARCH_PXA) += pxa +machine-$(CONFIG_ARCH_QCOM) += qcom machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc @@ -199,7 +199,6 @@ machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress -machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_W90X900) += w90x900 machine-$(CONFIG_ARCH_ZYNQ) += zynq diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d3cb0126a102..ec4dd7c3ed37 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -12,6 +12,8 @@ dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb +# sam9261 +dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb # sam9263 dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb @@ -29,6 +31,8 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb # sam9n12 dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb +# sam9rl +dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb # sam9x5 dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb @@ -119,9 +123,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ts219-6282.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb -dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ - qcom-apq8074-dragonboard.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ @@ -234,6 +235,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ dra7-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-apq8074-dragonboard.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ ste-hrefprev60-stuib.dtb \ ste-hrefprev60-tvk.dtb \ diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi new file mode 100644 index 000000000000..e21dda0e8986 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -0,0 +1,735 @@ +/* + * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC + * + * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> + * + * Licensed under GPLv2 only. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/at91.h> + +/ { + model = "Atmel AT91SAM9261 family SoC"; + compatible = "atmel,at91sam9261"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + tcb0 = &tcb0; + i2c0 = &i2c0; + ssc0 = &ssc0; + ssc1 = &ssc1; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + + memory { + reg = <0x20000000 0x08000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usb0: ohci@00500000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00500000 0x100000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + fb0: fb@0x00600000 { + compatible = "atmel,at91sam9261-lcdc"; + reg = <0x00600000 0x1000>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + clocks = <&lcd_clk>, <&hclk1>; + clock-names = "lcdc_clk", "hclk"; + status = "disabled"; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000>; + atmel,nand-addr-offset = <22>; + atmel,nand-cmd-offset = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + + gpios = <&pioC 15 GPIO_ACTIVE_HIGH>, + <&pioC 14 GPIO_ACTIVE_HIGH>, + <0>; + status = "disabled"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>, + <18 IRQ_TYPE_LEVEL_HIGH 0>, + <19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; + }; + + usb1: gadget@fffa4000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfffa4000 0x4000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&udc_clk>, <&udpck>; + clock-names = "usb_clk", "udc_clk", "udpck"; + status = "disabled"; + }; + + mmc0: mmc@fffa8000 { + compatible = "atmel,hsmci"; + reg = <0xfffa8000 0x600>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; + status = "disabled"; + }; + + i2c0: i2c@fffac000 { + compatible = "atmel,at91sam9261-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_twi>; + reg = <0xfffac000 0x100>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + status = "disabled"; + }; + + usart0: serial@fffb0000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb0000 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart1: serial@fffb4000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb4000 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart2: serial@fffb8000{ + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb8000 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + ssc0: ssc@fffbc000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffbc000 0x4000>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + + ssc1: ssc@fffc0000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffc0000 0x4000>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + status = "disabled"; + }; + + spi0: spi@fffc8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffc8000 0x200>; + cs-gpios = <0>, <0>, <0>, <0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + spi1: spi@fffcc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffcc000 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + ramc: ramc@ffffea00 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffea00 0x200>; + }; + + matrix: matrix@ffffee00 { + compatible = "atmel,at91sam9260-bus-matrix"; + reg = <0xffffee00 0x200>; + }; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <29 30 31>; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; + status = "disabled"; + }; + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x600>; + + atmel,mux-mask = + /* A B */ + <0xffffffff 0xfffffff7>, /* pioA */ + <0xffffffff 0xfffffff4>, /* pioB */ + <0xffffffff 0xffffff07>; /* pioC */ + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>, + <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + i2c0 { + pinctrl_i2c_bitbang: i2c-0-bitbang { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>, + <AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_i2c_twi: i2c-0-twi { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + fb { + pinctrl_fb: fb-0 { + atmel,pins = + <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioA_clk>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioB_clk>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioC_clk>; + }; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + clk32k: slck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&clk32k>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKB>; + clocks = <&main>; + reg = <1>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + atmel,clk-output-range = <0 94000000>; + atmel,clk-divisors = <1 2 4 3>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + atmel,clk-divisors = <1 2 4 3>; + clocks = <&pllb>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + hclk0: hclk0 { + #clock-cells = <0>; + reg = <16>; + clocks = <&mck>; + }; + + hclk1: hclk1 { + #clock-cells = <0>; + reg = <17>; + clocks = <&mck>; + }; + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <8>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <9>; + }; + + udc_clk: udc_clk { + #clock-cells = <0>; + reg = <10>; + }; + + twi0_clk: twi0_clk { + reg = <11>; + #clock-cells = <0>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <13>; + }; + + tc0_clk: tc0_clk { + #clock-cells = <0>; + reg = <17>; + }; + + tc1_clk: tc1_clk { + #clock-cells = <0>; + reg = <18>; + }; + + tc2_clk: tc2_clk { + #clock-cells = <0>; + reg = <19>; + }; + + ohci_clk: ohci_clk { + #clock-cells = <0>; + reg = <20>; + }; + + lcd_clk: lcd_clk { + #clock-cells = <0>; + reg = <21>; + }; + }; + }; + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + }; + + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + }; + + pit: timer@fffffd30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffd30 0xf>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; + }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_bitbang>; + gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */ + <&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts new file mode 100644 index 000000000000..2ce527e70c7a --- /dev/null +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -0,0 +1,211 @@ +/* + * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board + * + * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> + * + * Licensed under GPLv2 only. + */ +/dts-v1/; +#include "at91sam9261.dtsi" + +/ { + model = "Atmel at91sam9261ek"; + compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + usb0: ohci@00500000 { + status = "okay"; + }; + + fb0: fb@0x00600000 { + display = <&display0>; + atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <1>; + atmel,lcd-wiring-mode = "BRG"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <4965000>; + hactive = <240>; + vactive = <320>; + hback-porch = <1>; + hfront-porch = <33>; + vback-porch = <1>; + vfront-porch = <0>; + hsync-len = <5>; + vsync-len = <1>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + + apb { + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + spi0: spi@fffc8000 { + cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>; + status = "okay"; + + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + reg = <0>; + spi-max-frequency = <15000000>; + }; + + tsc2046@0 { + reg = <2>; + compatible = "ti,ads7843"; + interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; + spi-max-frequency = <3000000>; + pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>; + + ti,x-min = /bits/ 16 <150>; + ti,x-max = /bits/ 16 <3830>; + ti,y-min = /bits/ 16 <190>; + ti,y-max = /bits/ 16 <3830>; + ti,vref-delay-usecs = /bits/ 16 <450>; + ti,x-plate-ohms = /bits/ 16 <450>; + ti,y-plate-ohms = /bits/ 16 <250>; + ti,pressure-max = /bits/ 16 <15000>; + ti,debounce-rep = /bits/ 16 <0>; + ti,debounce-tol = /bits/ 16 <65535>; + ti,debounce-max = /bits/ 16 <1>; + + linux,wakeup; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + + }; + }; + + leds { + compatible = "gpio-leds"; + + ds8 { + label = "ds8"; + gpios = <&pioA 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + ds7 { + label = "ds7"; + gpios = <&pioA 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "nand-disk"; + }; + + ds1 { + label = "ds1"; + gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button_0 { + label = "button_0"; + gpios = <&pioA 27 GPIO_ACTIVE_LOW>; + linux,code = <256>; + gpio-key,wakeup; + }; + + button_1 { + label = "button_1"; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; + linux,code = <257>; + gpio-key,wakeup; + }; + + button_2 { + label = "button_2"; + gpios = <&pioA 25 GPIO_ACTIVE_LOW>; + linux,code = <258>; + gpio-key,wakeup; + }; + + button_3 { + label = "button_3"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + linux,code = <259>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi new file mode 100644 index 000000000000..63e1784d272c --- /dev/null +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -0,0 +1,802 @@ +/* + * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC + * + * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * Licensed under GPLv2 or later. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/clk/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Atmel AT91SAM9RL family SoC"; + compatible = "atmel,at91sam9rl", "atmel,at91sam9"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + i2c0 = &i2c0; + i2c1 = &i2c1; + ssc0 = &ssc0; + ssc1 = &ssc1; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + + memory { + reg = <0x20000000 0x04000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000>, + <0xffffe800 0x200>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + gpios = <&pioD 17 GPIO_ACTIVE_HIGH>, + <&pioB 6 GPIO_ACTIVE_HIGH>, + <0>; + status = "disabled"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>, + <17 IRQ_TYPE_LEVEL_HIGH 0>, + <18 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; + }; + + mmc0: mmc@fffa4000 { + compatible = "atmel,hsmci"; + reg = <0xfffa4000 0x600>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; + status = "disabled"; + }; + + i2c0: i2c@fffa8000 { + compatible = "atmel,at91sam9260-i2c"; + reg = <0xfffa8000 0x100>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + status = "disabled"; + }; + + i2c1: i2c@fffac000 { + compatible = "atmel,at91sam9260-i2c"; + reg = <0xfffac000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usart0: serial@fffb0000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb0000 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart1: serial@fffb4000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb4000 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart2: serial@fffb8000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb8000 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart3: serial@fffbc000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffbc000 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + ssc0: ssc@fffc0000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffc0000 0x4000>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + + ssc1: ssc@fffc4000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffc4000 0x4000>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + status = "disabled"; + }; + + spi0: spi@fffcc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffcc000 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + ramc0: ramc@ffffea00 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffea00 0x200>; + }; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; + status = "disabled"; + }; + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + atmel,mux-mask = + /* A B */ + <0xffffffff 0xe05c6738>, /* pioA */ + <0xffffffff 0x0000c780>, /* pioB */ + <0xffffffff 0xe3ffff0e>, /* pioC */ + <0x003fffff 0x0001ff3c>; /* pioD */ + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + }; + + i2c_gpio0 { + pinctrl_i2c_gpio0: i2c_gpio0-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>, + <AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; + }; + }; + + i2c_gpio1 { + pinctrl_i2c_gpio1: i2c_gpio1-0 { + atmel,pins = + <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>, + <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>, + <AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand0_ale_cle: nand_ale_cle-0 { + atmel,pins = + <AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_nand0_oe_we: nand_oe_we-0 { + atmel,pins = + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_nand0_cs: nand_cs-0 { + atmel,pins = + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { + atmel,pins = + <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_dcd: usart0_dcd-0 { + atmel,pins = + <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_ri: usart0_ri-0 { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_sck: usart0_sck-0 { + atmel,pins = + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart1_sck: usart1_sck-0 { + atmel,pins = + <AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart2_sck: usart2_sck-0 { + atmel,pins = + <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart3_sck: usart3_sck-0 { + atmel,pins = + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioA_clk>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioB_clk>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioC_clk>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioD_clk>; + }; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9g45-pmc"; + reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + clk32k: slck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&clk32k>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plla>, <&utmi>; + atmel,clk-output-range = <0 94000000>; + atmel,clk-divisors = <1 2 4 3>; + }; + + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <4>; + }; + + pioD_clk: pioD_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <8>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <9>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <10>; + }; + + twi0_clk: twi0_clk { + #clock-cells = <0>; + reg = <11>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + tc0_clk: tc0_clk { + #clock-cells = <0>; + reg = <16>; + }; + + tc1_clk: tc1_clk { + #clock-cells = <0>; + reg = <17>; + }; + + tc2_clk: tc2_clk { + #clock-cells = <0>; + reg = <18>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <19>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <20>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <21>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + lcd_clk: lcd_clk { + #clock-cells = <0>; + reg = <23>; + }; + }; + }; + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + }; + + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + }; + + pit: timer@fffffd30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffd30 0xf>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; + }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */ + <&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio0>; + status = "disabled"; + }; + + i2c@1 { + compatible = "i2c-gpio"; + gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */ + <&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio1>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts new file mode 100644 index 000000000000..cddb37825fad --- /dev/null +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -0,0 +1,157 @@ +/* + * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board + * + * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +#include "at91sam9rl.dtsi" + +/ { + model = "Atmel at91sam9rlek"; + compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt = <1>; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + + apb { + mmc0: mmc@fffa4000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + }; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = < + &pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts>; + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; + }; + + pmc: pmc@fffffc00 { + main: mainck { + clock-frequency = <12000000>; + }; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds1 { + label = "ds1"; + gpios = <&pioD 15 GPIO_ACTIVE_LOW>; + }; + + ds2 { + label = "ds2"; + gpios = <&pioD 16 GPIO_ACTIVE_LOW>; + }; + + ds3 { + label = "ds3"; + gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + right_click { + label = "right_click"; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; + linux,code = <273>; + gpio-key,wakeup; + }; + + left_click { + label = "left_click"; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; + linux,code = <272>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 0c81dc945aed..55d3f79c2ef5 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -65,9 +65,10 @@ #clock-cells = <1>; }; - reset-controller@88010000 { + rstc: reset-controller@88010000 { compatible = "sirf,prima2-rstc"; reg = <0x88010000 0x1000>; + #reset-cells = <1>; }; rsc-controller@88020000 { diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi index 1579c3491ccd..0c9647d28765 100644 --- a/arch/arm/boot/dts/marco.dtsi +++ b/arch/arm/boot/dts/marco.dtsi @@ -58,9 +58,10 @@ #size-cells = <1>; ranges = <0xc2000000 0xc2000000 0x1000000>; - reset-controller@c2000000 { + rstc: reset-controller@c2000000 { compatible = "sirf,marco-rstc"; reg = <0xc2000000 0x10000>; + #reset-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 8582ae41a583..20145526cd7b 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -76,9 +76,10 @@ #clock-cells = <1>; }; - reset-controller@88010000 { + rstc: reset-controller@88010000 { compatible = "sirf,prima2-rstc"; reg = <0x88010000 0x1000>; + #reset-cells = <1>; }; rsc-controller@88020000 { diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 68a72f5507b9..169bad90dac9 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -1,63 +1,6 @@ -/dts-v1/; - -/include/ "skeleton.dtsi" - -#include <dt-bindings/clock/qcom,gcc-msm8660.h> +#include "qcom-msm8660.dtsi" / { model = "Qualcomm MSM8660 SURF"; compatible = "qcom,msm8660-surf", "qcom,msm8660"; - interrupt-parent = <&intc>; - - intc: interrupt-controller@2080000 { - compatible = "qcom,msm-8660-qgic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02080000 0x1000 >, - < 0x02081000 0x1000 >; - }; - - timer@2000000 { - compatible = "qcom,scss-timer", "qcom,msm-timer"; - interrupts = <1 0 0x301>, - <1 1 0x301>, - <1 2 0x301>; - reg = <0x02000000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x40000>; - }; - - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - reg = <0x00800000 0x4000>; - gpio-controller; - #gpio-cells = <2>; - ngpio = <173>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8660"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; - - serial@19c40000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x19c40000 0x1000>, - <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; - clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; - clock-names = "core", "iface"; - }; - - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi new file mode 100644 index 000000000000..69d6c4edea30 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -0,0 +1,63 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +#include <dt-bindings/clock/qcom,gcc-msm8660.h> + +/ { + model = "Qualcomm MSM8660"; + compatible = "qcom,msm8660"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@2080000 { + compatible = "qcom,msm-8660-qgic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02080000 0x1000 >, + < 0x02081000 0x1000 >; + }; + + timer@2000000 { + compatible = "qcom,scss-timer", "qcom,msm-timer"; + interrupts = <1 0 0x301>, + <1 1 0x301>, + <1 2 0x301>; + reg = <0x02000000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x40000>; + }; + + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + reg = <0x00800000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + ngpio = <173>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8660"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + serial@19c40000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x19c40000 0x1000>, + <0x19c00000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 7c30de4fa302..a58fb88315f6 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -1,70 +1,6 @@ -/dts-v1/; - -/include/ "skeleton.dtsi" - -#include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include "qcom-msm8960.dtsi" / { model = "Qualcomm MSM8960 CDP"; compatible = "qcom,msm8960-cdp", "qcom,msm8960"; - interrupt-parent = <&intc>; - - intc: interrupt-controller@2000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02000000 0x1000 >, - < 0x02002000 0x1000 >; - }; - - timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>; - reg = <0x0200a000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x80000>; - }; - - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - gpio-controller; - #gpio-cells = <2>; - ngpio = <150>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x800000 0x4000>; - }; - - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8960"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; - - clock-controller@4000000 { - compatible = "qcom,mmcc-msm8960"; - reg = <0x4000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - serial@16440000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16440000 0x1000>, - <0x16400000 0x1000>; - interrupts = <0 154 0x0>; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - }; - - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi new file mode 100644 index 000000000000..ff002826552a --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -0,0 +1,70 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +#include <dt-bindings/clock/qcom,gcc-msm8960.h> + +/ { + model = "Qualcomm MSM8960"; + compatible = "qcom,msm8960"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02000000 0x1000 >, + < 0x02002000 0x1000 >; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + gpio-controller; + #gpio-cells = <2>; + ngpio = <150>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8960"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; +}; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 0b4e9b5210d8..300ded9acbe9 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -16,10 +16,12 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_SOC_AT91RM9200=y CONFIG_SOC_AT91SAM9260=y +CONFIG_SOC_AT91SAM9261=y CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y CONFIG_SOC_AT91SAM9N12=y +CONFIG_SOC_AT91SAM9RL=y CONFIG_MACH_AT91RM9200_DT=y CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_TIMER_HZ=128 @@ -119,6 +121,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y # CONFIG_SERIO is not set CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y diff --git a/arch/arm/configs/at91sam9260_9g20_defconfig b/arch/arm/configs/at91sam9260_9g20_defconfig index 2cd832918e9c..c4c160fc8791 100644 --- a/arch/arm/configs/at91sam9260_9g20_defconfig +++ b/arch/arm/configs/at91sam9260_9g20_defconfig @@ -3,6 +3,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -30,15 +31,12 @@ CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_SLOW_CLOCK=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_AUTO_ZRELADDR=y -CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -57,15 +55,14 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -112,8 +109,6 @@ CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PROCFS is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 7b6f131cecd6..85f846ae9ff2 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -1,8 +1,8 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_EMBEDDED=y CONFIG_BLK_DEV_INITRD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -14,20 +14,23 @@ CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9RL=y CONFIG_MACH_AT91SAM9RLEK=y # CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y +CONFIG_AUTO_ZRELADDR=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -66,6 +69,7 @@ CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_UBIFS_FS=y CONFIG_CRAMFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index f43392dc2dcf..0302d293fba0 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -31,6 +31,7 @@ CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y CONFIG_ARCH_MULTI_V6=y # CONFIG_ARCH_MULTI_V7 is not set +CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM2835=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig index 9e8c8316d6b0..0facf9da047c 100644 --- a/arch/arm/configs/clps711x_defconfig +++ b/arch/arm/configs/clps711x_defconfig @@ -15,7 +15,6 @@ CONFIG_ARCH_CDB89712=y CONFIG_ARCH_CLEP7312=y CONFIG_ARCH_EDB7211=y CONFIG_ARCH_P720T=y -CONFIG_ARCH_FORTUNET=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -27,7 +26,6 @@ CONFIG_INET=y # CONFIG_IPV6 is not set CONFIG_IRDA=y CONFIG_IRTTY_SIR=y -CONFIG_EP7211_DONGLE=y # CONFIG_WIRELESS is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -58,6 +56,7 @@ CONFIG_CS89x0_PLATFORM=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +CONFIG_SERIAL_CLPS711X=y CONFIG_SERIAL_CLPS711X_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index 83f2aa83899c..f6fcc67ef06e 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -12,12 +12,6 @@ #ifndef _ASMARM_TIMEX_H #define _ASMARM_TIMEX_H -#ifdef CONFIG_ARCH_MULTIPLATFORM -#define CLOCK_TICK_RATE 1000000 -#else -#include <mach/timex.h> -#endif - typedef unsigned long cycles_t; #define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S index f3a9cff6d5d4..8d8d922e5e44 100644 --- a/arch/arm/include/debug/samsung.S +++ b/arch/arm/include/debug/samsung.S @@ -9,7 +9,7 @@ * published by the Free Software Foundation. */ -#include <plat/regs-serial.h> +#include <linux/serial_s3c.h> /* The S5PV210/S5PC110 implementations are as belows. */ diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 9968f208b7df..b2d2cf4dc052 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -131,7 +131,6 @@ config SOC_AT91SAM9261 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_USB_CLK help Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC. @@ -149,7 +148,6 @@ config SOC_AT91SAM9RL select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_UTMI config SOC_AT91SAM9G45 diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index e47f5fd232f5..787bb50a4dff 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -21,6 +21,7 @@ #include <mach/at91rm9200.h> #include <mach/at91_st.h> #include <mach/cpu.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "soc.h" diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 3ebc9792560c..f3f19f21352a 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -21,6 +21,7 @@ #include <mach/at91rm9200.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -922,6 +923,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -960,6 +962,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -987,9 +990,10 @@ static inline void configure_usart0_pins(unsigned pins) if (pins & ATMEL_UART_RTS) { /* * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. - * We need to drive the pin manually. Default is off (RTS is active low). + * We need to drive the pin manually. The serial driver will driver + * this to high when initializing. */ - at91_set_gpio_output(AT91_PIN_PA21, 1); + uart0_data.rts_gpio = AT91_PIN_PA21; } } @@ -1009,6 +1013,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1060,6 +1065,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1103,6 +1109,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index bc7b363a3083..7fd13aef9827 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -31,6 +31,7 @@ #include <asm/mach/time.h> #include <mach/at91_st.h> +#include <mach/hardware.h> static unsigned long last_crtr; static u32 irqmask; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 6c821e562159..c3d22be73b7c 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -21,6 +21,7 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 1630ae64d3fb..8b1b0a870025 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -25,6 +25,7 @@ #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/at91_adc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -819,6 +820,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -857,6 +859,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -908,6 +911,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -951,6 +955,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -994,6 +999,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); @@ -1037,6 +1043,7 @@ static struct resource uart4_resources[] = { static struct atmel_uart_data uart4_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart4_dmamask = DMA_BIT_MASK(32); @@ -1075,6 +1082,7 @@ static struct resource uart5_resources[] = { static struct atmel_uart_data uart5_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart5_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 6276b4c1acfe..fb164a5d04a9 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -20,15 +20,18 @@ #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" #include "pm.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" + /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -189,6 +192,23 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), + /* more lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), + CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &hck0), + CLKDEV_CON_DEV_ID("hclk", "600000.fb", &hck1), + CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), + CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -247,7 +267,9 @@ static void __init at91sam9261_register_clocks(void) clk_register(&hck0); clk_register(&hck1); } - +#else +#define at91sam9261_register_clocks NULL +#endif /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index b2a34740146a..80e35895d28f 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -25,6 +25,7 @@ #include <mach/at91sam9261_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -880,6 +881,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -918,6 +920,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -961,6 +964,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1004,6 +1008,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 37b90f4b990c..f30290572293 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -19,6 +19,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9263.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" @@ -223,6 +224,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk), CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 4aeadddbc181..43d53d6156dd 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -24,6 +24,7 @@ #include <mach/at91sam9263_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -1324,6 +1325,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1362,6 +1364,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1405,6 +1408,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1448,6 +1452,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 0f04ffe9c5a8..0a9e2fc8f796 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -19,6 +19,7 @@ #include <linux/of_irq.h> #include <asm/mach/time.h> +#include <mach/hardware.h> #define AT91_PIT_MR 0x00 /* Mode Register */ #define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 2f455ce35268..5e6f498db0a8 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -20,6 +20,7 @@ #include <asm/system_misc.h> #include <mach/at91sam9g45.h> #include <mach/cpu.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "soc.h" @@ -284,6 +285,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("pioE", &pioDE_clk), /* Fake adc clock */ CLKDEV_CON_ID("adc_clk", &tsc_clk), + CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index cb36fa872d30..77b04c2edd78 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -32,6 +32,7 @@ #include <mach/at91sam9_smc.h> #include <linux/platform_data/dma-atmel.h> #include <mach/atmel-mci.h> +#include <mach/hardware.h> #include <media/atmel-isi.h> @@ -1587,6 +1588,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1625,6 +1627,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1668,6 +1671,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1711,6 +1715,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1754,6 +1759,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 4ef088c62eab..f2ea7b0a02da 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -182,6 +182,7 @@ static struct clk_lookup periph_clocks_lookups[] = { /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk), CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk), + CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk), }; /* diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 3651517abedf..57f12d86c0e6 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -20,18 +20,20 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" #include "pm.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* * The peripheral clocks. @@ -196,6 +198,24 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), CLKDEV_CON_ID("pioD", &pioD_clk), + /* more lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk), + CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "fffc8000.pwm", &pwm_clk), + CLKDEV_CON_DEV_ID(NULL, "ffffc800.pwm", &pwm_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -238,6 +258,7 @@ static void __init at91sam9rl_register_clocks(void) clk_register(&pck0); clk_register(&pck1); } +#endif /* -------------------------------------------------------------------- * GPIO @@ -350,6 +371,8 @@ AT91_SOC_START(at91sam9rl) .default_irq_priority = at91sam9rl_default_irq_priority, .extern_irq = (1 << AT91SAM9RL_ID_IRQ0), .ioremap_registers = at91sam9rl_ioremap_registers, +#if defined(CONFIG_OLD_CLK_AT91) .register_clocks = at91sam9rl_register_clocks, +#endif .init = at91sam9rl_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index a698bdab2cce..428fc412aaf1 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -21,6 +21,7 @@ #include <mach/at91sam9rl_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include <linux/platform_data/dma-atmel.h> #include "board.h" @@ -956,6 +957,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -994,6 +996,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1045,6 +1048,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1088,6 +1092,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1131,6 +1136,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 3e8ec26e39dc..9ad781d5ee7c 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -253,6 +253,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk), CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk), CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk), + CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk), }; /* diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index bad94b84a46f..7523f1cdfe1d 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -19,7 +19,7 @@ #include <asm/mach/arch.h> #include <mach/at91x40.h> #include <mach/at91_st.h> -#include <mach/timex.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index c0e637adf65d..07d0bf2ac2da 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -25,6 +25,7 @@ #include <linux/time.h> #include <linux/io.h> #include <mach/hardware.h> +#include <mach/at91x40.h> #include <asm/mach/time.h> #include "at91_tc.h" diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c index 3dab868b02fa..575b0be66ca8 100644 --- a/arch/arm/mach-at91/board-dt-sam9.c +++ b/arch/arm/mach-at91/board-dt-sam9.c @@ -13,6 +13,7 @@ #include <linux/gpio.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/clk-provider.h> #include <asm/setup.h> #include <asm/irq.h> @@ -25,6 +26,14 @@ #include "generic.h" +static void __init sam9_dt_timer_init(void) +{ +#if defined(CONFIG_COMMON_CLK) + of_clk_init(NULL); +#endif + at91sam926x_pit_init(); +} + static const struct of_device_id irq_of_match[] __initconst = { { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, @@ -43,7 +52,7 @@ static const char *at91_dt_board_compat[] __initdata = { DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = sam9_dt_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = at91_dt_initialize, diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index c1d61d247790..416bae8435ee 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -31,6 +31,7 @@ #include <asm/mach/arch.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 65c0d6b5ecba..5f25fa54eb93 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -30,6 +30,7 @@ #include <asm/mach/arch.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 869cbecf00b7..e4a5ac17cdbc 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -26,6 +26,7 @@ #include <asm/mach/arch.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index 90680217064e..38dca2bb027f 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -55,4 +55,6 @@ #define AT91_PS_CR (AT91_PS + 0) /* PS Control register */ #define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */ +#define AT91X40_MASTER_CLOCK 40000000 + #endif /* AT91X40_H */ diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h deleted file mode 100644 index 5e917a66edd7..000000000000 --- a/arch/arm/mach-at91/include/mach/timex.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/timex.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include <mach/hardware.h> - -#ifdef CONFIG_ARCH_AT91X40 - -#define AT91X40_MASTER_CLOCK 40000000 -#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) - -#else - -#define CLOCK_TICK_RATE 12345678 - -#endif - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 590b52dea9f7..8bda1cefdf96 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -27,6 +27,7 @@ #include <asm/mach/irq.h> #include <mach/cpu.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "generic.h" diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index b1aa6a9b3bd1..396d05c8b570 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -16,12 +16,7 @@ config ARCH_BCM_MOBILE select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC - select CPU_V7 - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select GENERIC_TIME select GPIO_BCM_KONA - select SPARSE_IRQ select TICK_ONESHOT select CACHE_L2X0 select HAVE_ARM_ARCH_TIMER @@ -32,6 +27,22 @@ config ARCH_BCM_MOBILE BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 variants. +config ARCH_BCM2835 + bool "Broadcom BCM2835 family" if ARCH_MULTI_V6 + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_ERRATA_411920 + select ARM_TIMER_SP804 + select CLKDEV_LOOKUP + select CLKSRC_OF + select CPU_V6 + select GENERIC_CLOCKEVENTS + select PINCTRL + select PINCTRL_BCM2835 + help + This enables support for the Broadcom BCM2835 SoC. This SoC is + used in the Raspberry Pi and Roku 2 devices. + endmenu endif diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index c2ccd5a0f772..0ad293882079 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -11,5 +11,7 @@ # GNU General Public License for more details. obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o +obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o + plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index cb3dc364405c..6be54c10f8cb 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012-2013 Broadcom Corporation + * Copyright (C) 2012-2014 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -11,64 +11,65 @@ * GNU General Public License for more details. */ -#include <linux/of_platform.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> #include <linux/clocksource.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/hardware/cache-l2x0.h> -#include "bcm_kona_smc.h" #include "kona.h" -static int __init kona_l2_cache_init(void) +#define SECWDOG_OFFSET 0x00000000 +#define SECWDOG_RESERVED_MASK 0xe2000000 +#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000 +#define SECWDOG_EN_MASK 0x08000000 +#define SECWDOG_SRSTEN_MASK 0x04000000 +#define SECWDOG_CLKS_SHIFT 20 +#define SECWDOG_COUNT_SHIFT 0 + +static void bcm281xx_restart(enum reboot_mode mode, const char *cmd) { - if (!IS_ENABLED(CONFIG_CACHE_L2X0)) - return 0; + uint32_t val; + void __iomem *base; + struct device_node *np_wdog; - if (bcm_kona_smc_init() < 0) { - pr_info("Kona secure API not available. Skipping L2 init\n"); - return 0; + np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt"); + if (!np_wdog) { + pr_emerg("Couldn't find brcm,kona-wdt\n"); + return; + } + base = of_iomap(np_wdog, 0); + if (!base) { + pr_emerg("Couldn't map brcm,kona-wdt\n"); + return; } - bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); - - /* - * The aux_val and aux_mask have no effect since L2 cache is already - * enabled. Pass 0s for aux_val and 1s for aux_mask for default value. - */ - return l2x0_of_init(0, ~0); -} - -static void bcm_board_setup_restart(void) -{ - struct device_node *np; + /* Enable watchdog with short timeout (244us). */ + val = readl(base + SECWDOG_OFFSET); + val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK; + val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK | + (0x15 << SECWDOG_CLKS_SHIFT) | + (0x8 << SECWDOG_COUNT_SHIFT); + writel(val, base + SECWDOG_OFFSET); - np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351"); - if (np) { - if (of_device_is_available(np)) - bcm_kona_setup_restart(); - of_node_put(np); - } - /* Restart setup for other boards goes here */ + /* Wait for reset */ + while (1); } -static void __init board_init(void) +static void __init bcm281xx_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, &platform_bus); - - bcm_board_setup_restart(); kona_l2_cache_init(); } -static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, }; +static const char * const bcm281xx_dt_compat[] = { + "brcm,bcm11351", /* Have to use the first number upstreamed */ + NULL, +}; -DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor") - .init_machine = board_init, - .restart = bcm_kona_restart, - .dt_compat = bcm11351_dt_compat, +DT_MACHINE_START(BCM281XX_DT, "BCM281xx Broadcom Application Processor") + .init_machine = bcm281xx_init, + .restart = bcm281xx_restart, + .dt_compat = bcm281xx_dt_compat, MACHINE_END diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 70f2f3925f0e..70f2f3925f0e 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona.c index 6939d9017f63..768bc2837bf5 100644 --- a/arch/arm/mach-bcm/kona.c +++ b/arch/arm/mach-bcm/kona.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2013 Broadcom Corporation + * Copyright (C) 2012-2014 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -11,55 +11,33 @@ * GNU General Public License for more details. */ -#include <linux/of_address.h> -#include <asm/io.h> +#include <linux/of_platform.h> +#include <asm/hardware/cache-l2x0.h> +#include "bcm_kona_smc.h" #include "kona.h" -static void __iomem *watchdog_base; - -void bcm_kona_setup_restart(void) +void __init kona_l2_cache_init(void) { - struct device_node *np_wdog; + int ret; - /* - * The assumption is that whoever calls bcm_kona_setup_restart() - * also needs a Kona Watchdog Timer entry in Device Tree, i.e. we - * report an error if the DT entry is missing. - */ - np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt"); - if (!np_wdog) { - pr_err("brcm,kona-wdt not found in DT, reboot disabled\n"); + if (!IS_ENABLED(CONFIG_CACHE_L2X0)) return; - } - watchdog_base = of_iomap(np_wdog, 0); - WARN(!watchdog_base, "failed to map watchdog base"); - of_node_put(np_wdog); -} - -#define SECWDOG_OFFSET 0x00000000 -#define SECWDOG_RESERVED_MASK 0xE2000000 -#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000 -#define SECWDOG_EN_MASK 0x08000000 -#define SECWDOG_SRSTEN_MASK 0x04000000 -#define SECWDOG_CLKS_SHIFT 20 -#define SECWDOG_LOCK_SHIFT 0 -void bcm_kona_restart(enum reboot_mode mode, const char *cmd) -{ - uint32_t val; - - if (!watchdog_base) - panic("Watchdog not mapped. Reboot failed.\n"); + ret = bcm_kona_smc_init(); + if (ret) { + pr_info("Secure API not available (%d). Skipping L2 init.\n", + ret); + return; + } - /* Enable watchdog2 with very short timeout. */ - val = readl(watchdog_base + SECWDOG_OFFSET); - val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK; - val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK | - (0x8 << SECWDOG_CLKS_SHIFT) | - (0x8 << SECWDOG_LOCK_SHIFT); - writel(val, watchdog_base + SECWDOG_OFFSET); + bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); - while (1) - ; + /* + * The aux_val and aux_mask have no effect since L2 cache is already + * enabled. Pass 0s for aux_val and 1s for aux_mask for default value. + */ + ret = l2x0_of_init(0, ~0); + if (ret) + pr_err("Couldn't enable L2 cache: %d\n", ret); } diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona.h index 291eca3e06ff..3a7a017c29cd 100644 --- a/arch/arm/mach-bcm/kona.h +++ b/arch/arm/mach-bcm/kona.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2013 Broadcom Corporation + * Copyright (C) 2012-2014 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -11,7 +11,4 @@ * GNU General Public License for more details. */ -#include <linux/reboot.h> - -void bcm_kona_setup_restart(void); -void bcm_kona_restart(enum reboot_mode mode, const char *cmd); +void __init kona_l2_cache_init(void); diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig deleted file mode 100644 index d1f9612f8c15..000000000000 --- a/arch/arm/mach-bcm2835/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -config ARCH_BCM2835 - bool "Broadcom BCM2835 family" if ARCH_MULTI_V6 - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select ARM_ERRATA_411920 - select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select CLKSRC_OF - select CPU_V6 - select GENERIC_CLOCKEVENTS - select PINCTRL - select PINCTRL_BCM2835 - help - This enables support for the Broadcom BCM2835 SoC. This SoC is - used in the Raspberry Pi and Roku 2 devices. diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile deleted file mode 100644 index 4c3892fe02c3..000000000000 --- a/arch/arm/mach-bcm2835/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += bcm2835.o diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 7a02d222c378..b0cb0722acd2 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,9 +1,7 @@ config ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 select ARM_GIC - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select COMMON_CLK select DW_APB_ICTL select DW_APB_TIMER_OF @@ -16,12 +14,10 @@ config MACH_BERLIN_BG2 select CACHE_L2X0 select CPU_PJ4B select HAVE_ARM_TWD if SMP - select HAVE_SMP config MACH_BERLIN_BG2CD bool "Marvell Armada 1500-mini (BG2CD)" select CACHE_L2X0 - select CPU_V7 select HAVE_ARM_TWD if SMP endmenu diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index bea6295c8c59..f711498c180c 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -33,20 +33,6 @@ config ARCH_P720T Say Y here if you intend to run this kernel on the ARM Prospector 720T. -config EP72XX_ROM_BOOT - bool "EP721x/EP731x ROM boot" - help - If you say Y here, your CLPS711x-based kernel will use the bootstrap - mode memory map instead of the normal memory map. - - Processors derived from the Cirrus CLPS711X core support two boot - modes. Normal mode boots from the external memory device at CS0. - Bootstrap mode rearranges parts of the memory map, placing an - internal 128 byte bootstrap ROM at CS0. This option performs the - address map changes required to support booting in this mode. - - You almost surely want to say N here. - endmenu endif diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index c5a8ea6839ef..5d6afda1c0e8 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -38,13 +38,6 @@ #define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off)) #endif -/* - * The physical addresses that the external chip select signals map to is - * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212 - * processors. CONFIG_EP72XX_BOOT_ROM is only available if these - * processors are in use. - */ -#ifndef CONFIG_EP72XX_ROM_BOOT #define CS0_PHYS_BASE (0x00000000) #define CS1_PHYS_BASE (0x10000000) #define CS2_PHYS_BASE (0x20000000) @@ -53,16 +46,6 @@ #define CS5_PHYS_BASE (0x50000000) #define CS6_PHYS_BASE (0x60000000) #define CS7_PHYS_BASE (0x70000000) -#else -#define CS0_PHYS_BASE (0x70000000) -#define CS1_PHYS_BASE (0x60000000) -#define CS2_PHYS_BASE (0x50000000) -#define CS3_PHYS_BASE (0x40000000) -#define CS4_PHYS_BASE (0x30000000) -#define CS5_PHYS_BASE (0x20000000) -#define CS6_PHYS_BASE (0x10000000) -#define CS7_PHYS_BASE (0x00000000) -#endif #define CLPS711X_SRAM_BASE CS6_PHYS_BASE #define CLPS711X_SRAM_SIZE (48 * 1024) diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h deleted file mode 100644 index de6fd192d1c3..000000000000 --- a/arch/arm/mach-clps711x/include/mach/timex.h +++ /dev/null @@ -1,2 +0,0 @@ -/* Bogus value */ -#define CLOCK_TICK_RATE 512000 diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index dbf0df8bb0ac..dce8decd5d46 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,9 +1,6 @@ config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 select ARM_GIC - select CPU_V6K - select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h deleted file mode 100644 index 9b885298f106..000000000000 --- a/arch/arm/mach-davinci/include/mach/timex.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * DaVinci timer defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz, - * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/ - * linux/jiffies.h) are not used directly in code. Currently none of the - * code relevant to DaVinci platform depends on these values directly. - */ -#define CLOCK_TICK_RATE 27000000 - -#endif /* __ASM_ARCH_TIMEX_H__ */ diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h deleted file mode 100644 index 251d538541db..000000000000 --- a/arch/arm/mach-dove/include/mach/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h deleted file mode 100644 index 4fb43b22a102..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-ebsa110/include/mach/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA110 architecture timex specifications - */ - -/* - * On the EBSA, the clock ticks at weird rates. - * This is therefore not used to calculate the - * divisor. - */ -#define CLOCK_TICK_RATE 47894000 - diff --git a/arch/arm/mach-efm32/include/mach/entry-macro.S b/arch/arm/mach-efm32/include/mach/entry-macro.S deleted file mode 100644 index 322159d5ed91..000000000000 --- a/arch/arm/mach-efm32/include/mach/entry-macro.S +++ /dev/null @@ -1,4 +0,0 @@ -/* - * Empty file waiting for deletion once <mach/entry-macro.S> isn't needed any - * more. Patch "ARM: v7-M: drop using mach/entry-macro.S" sitting in next. - */ diff --git a/arch/arm/mach-efm32/include/mach/timex.h b/arch/arm/mach-efm32/include/mach/timex.h deleted file mode 100644 index 7a8b26da6599..000000000000 --- a/arch/arm/mach-efm32/include/mach/timex.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * Empty file waiting for deletion once <mach/timex.h> isn't needed any more. - */ diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index fd021ba539fe..0e571f1749d6 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -117,7 +117,7 @@ void __init ep93xx_map_io(void) #define EP93XX_TIMER4_CLOCK 983040 #define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1) -#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) +#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ) static unsigned int last_jiffy_time; diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h deleted file mode 100644 index 6b3503b01fa6..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/timex.h - */ - -#define CLOCK_TICK_RATE 983040 diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 8d0042c9d4d3..b2f9bb071557 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -20,6 +20,7 @@ #include <clocksource/samsung_pwm.h> #include <linux/sched.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/of.h> #include <linux/of_fdt.h> #include <linux/of_irq.h> @@ -40,7 +41,6 @@ #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include "common.h" #include "regs-pmu.h" diff --git a/arch/arm/mach-exynos/include/mach/timex.h b/arch/arm/mach-exynos/include/mach/timex.h deleted file mode 100644 index 6d138750a708..000000000000 --- a/arch/arm/mach-exynos/include/mach/timex.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/timex.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Based on arch/arm/mach-s5p6442/include/mach/timex.h - * - * EXYNOS4 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h deleted file mode 100644 index 5d7ce36be46f..000000000000 --- a/arch/arm/mach-exynos/include/mach/uncompress.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H __FILE__ - -#include <asm/mach-types.h> - -#include <mach/map.h> -#include <plat/uncompress.h> - -static unsigned int __raw_readl(unsigned int ptr) -{ - return *((volatile unsigned int *)ptr); -} - -static void arch_detect_cpu(void) -{ - u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID); - - /* - * product_id is bits 31:12 - * bits 23:20 describe the exynosX family - * bits 27:24 describe the exynosX family in exynos5420 - */ - chip_id >>= 20; - - if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50) - uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); - else - uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); - - /* - * For preventing FIFO overrun or infinite loop of UART console, - * fifo_max should be the minimum fifo size of all of the UART channels - */ - fifo_mask = S5PV210_UFSTAT_TXMASK; - fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT; -} -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 8fd24882f0b1..fe6570ebbdde 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -22,8 +22,6 @@ #include <linux/of_platform.h> #include <linux/sched.h> -#include <plat/devs.h> - #include "regs-pmu.h" /* diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h deleted file mode 100644 index d0fea9d6d4ab..000000000000 --- a/arch/arm/mach-footbridge/include/mach/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/timex.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA285 architecture timex specifications - */ - -/* - * We assume a constant here; this satisfies the maths in linux/timex.h - * and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but - * this must be a constant. - */ -#define CLOCK_TICK_RATE (50000000/16) diff --git a/arch/arm/mach-gemini/include/mach/timex.h b/arch/arm/mach-gemini/include/mach/timex.h deleted file mode 100644 index dc5690ba975c..000000000000 --- a/arch/arm/mach-gemini/include/mach/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * Gemini timex specifications - * - * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* When AHB bus frequency is 150MHz */ -#define CLOCK_TICK_RATE 38000000 diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 0aded64a9ebc..830b76e70250 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -5,7 +5,6 @@ config ARCH_HIGHBANK select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 @@ -14,14 +13,8 @@ config ARCH_HIGHBANK select ARM_PSCI select ARM_TIMER_SP804 select CACHE_L2X0 - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select MAILBOX select PL320_MBOX - select SPARSE_IRQ - select USE_OF select ZONE_DMA if ARM_LPAE diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 1abae5f6a418..feee4dbb0760 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -3,13 +3,9 @@ config ARCH_HI3xxx select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 - select ARCH_WANT_OPTIONAL_GPIOLIB select CACHE_L2X0 - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_ARM_SCU + select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select PINCTRL select PINCTRL_SINGLE help diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 33567aa5880f..41ffd433f709 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -2,18 +2,11 @@ config ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM - select ARM_PATCH_PHYS_VIRT select CLKSRC_MMIO - select COMMON_CLK select GENERIC_ALLOCATOR - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 - select MULTI_IRQ_HANDLER select PINCTRL select SOC_BUS - select SPARSE_IRQ - select USE_OF help Support for Freescale MXC/iMX-based family of processors @@ -121,7 +114,6 @@ config SOC_IMX31 config SOC_IMX35 bool select ARCH_MXC_IOMUX_V3 - select CPU_V6K select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP @@ -132,7 +124,6 @@ config SOC_IMX5 select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 - select CPU_V7 select MXC_TZIC config SOC_IMX51 @@ -792,14 +783,12 @@ config SOC_IMX6Q select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 select ARM_GIC - select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC - select HAVE_SMP select MFD_SYSCON select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI @@ -817,7 +806,6 @@ config SOC_IMX6SL select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_GIC - select CPU_V7 select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC @@ -833,9 +821,7 @@ config SOC_IMX6SL config SOC_VF610 bool "Vybrid Family VF610 support" - select CPU_V7 select ARM_GIC - select CLKSRC_OF select PINCTRL_VF610 select VF_PIT_TIMER select PL310_ERRATA_588369 if CACHE_PL310 diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h deleted file mode 100644 index 1dcb42028c82..000000000000 --- a/arch/arm/mach-integrator/include/mach/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/timex.h - * - * Integrator architecture timex specifications - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * ?? - */ -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h deleted file mode 100644 index 45fb2745bb54..000000000000 --- a/arch/arm/mach-iop13xx/include/mach/timex.h +++ /dev/null @@ -1 +0,0 @@ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h deleted file mode 100644 index 7262ab81419d..000000000000 --- a/arch/arm/mach-iop32x/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/timex.h - * - * IOP32x architecture timex specifications - */ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h deleted file mode 100644 index 54c589091d6e..000000000000 --- a/arch/arm/mach-iop33x/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/timex.h - * - * IOP3xx architecture timex specifications - */ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index be882c95bd36..fc4b7b24265e 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -23,7 +23,6 @@ #include <linux/interrupt.h> #include <linux/bitops.h> #include <linux/time.h> -#include <linux/timex.h> #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> @@ -44,6 +43,17 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> +#define IXP4XX_TIMER_FREQ 66666000 + +/* + * The timer register doesn't allow to specify the two least significant bits of + * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is + * the best value with the two least significant bits unset. + */ +#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \ + (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \ + (IXP4XX_OST_RELOAD_MASK + 1) + static void __init ixp4xx_clocksource_init(void); static void __init ixp4xx_clockevent_init(void); static struct clock_event_device clockevent_ixp4xx; @@ -519,7 +529,7 @@ static void ixp4xx_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK; + osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK; opts = IXP4XX_OST_ENABLE; break; case CLOCK_EVT_MODE_ONESHOT: diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h deleted file mode 100644 index 0396d89f947c..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/timex.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/timex.h - * - */ - -#include <mach/ixp4xx-regs.h> - -/* - * We use IXP425 General purpose timer for our timer needs, it runs at - * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the - * timer register ignores the bottom 2 bits of the LATCH value. - */ -#define IXP4XX_TIMER_FREQ 66666000 -#define CLOCK_TICK_RATE \ - (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) - diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index 90a708fef541..f50bc936cb84 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -1,13 +1,9 @@ config ARCH_KEYSTONE bool "Texas Instruments Keystone Devices" depends on ARCH_MULTI_V7 - select CPU_V7 select ARM_GIC select HAVE_ARM_ARCH_TIMER - select HAVE_SMP select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_ERRATA_798181 if SMP select COMMON_CLK_KEYSTONE select ARCH_SUPPORTS_BIG_ENDIAN diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h deleted file mode 100644 index c923cd169b9c..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/timex.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h deleted file mode 100644 index 10f716371bd3..000000000000 --- a/arch/arm/mach-ks8695/include/mach/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/timex.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * KS8695 - Time Parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include <mach/hardware.h> - -#define CLOCK_TICK_RATE KS8695_CLOCK_RATE - -#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h deleted file mode 100644 index 8d4066b16b3f..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/timex.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/timex.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * Rate in Hz of the main system oscillator. This value should match - * the value 'MAIN_OSC_FREQ' in platform.h - */ -#define CLOCK_TICK_RATE 13000000 - -#endif diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h deleted file mode 100644 index 70c9f1d88c02..000000000000 --- a/arch/arm/mach-mmp/include/mach/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/timex.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifdef CONFIG_CPU_MMP2 -#define CLOCK_TICK_RATE 6500000 -#else -#define CLOCK_TICK_RATE 3250000 -#endif diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index bbcd2322fd27..2756351dbb35 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -39,6 +39,12 @@ #include "clock.h" +#ifdef CONFIG_CPU_MMP2 +#define MMP_CLOCK_FREQ 6500000 +#else +#define MMP_CLOCK_FREQ 3250000 +#endif + #define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE #define MAX_DELTA (0xfffffffe) @@ -195,14 +201,14 @@ void __init timer_init(int irq) { timer_config(); - sched_clock_register(mmp_read_sched_clock, 32, CLOCK_TICK_RATE); + sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ); ckevt.cpumask = cpumask_of(0); setup_irq(irq, &timer_irq); - clocksource_register_hz(&cksrc, CLOCK_TICK_RATE); - clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE, + clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ); + clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ, MIN_DELTA, MAX_DELTA); } diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index e9b45bb58263..82a4ba8578a2 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -2,14 +2,9 @@ config ARCH_MOXART bool "MOXA ART SoC" if ARCH_MULTI_V4 select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE - select USE_OF - select CLKSRC_OF select CLKSRC_MMIO - select HAVE_CLK - select COMMON_CLK select GENERIC_IRQ_CHIP select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS select PHYLIB if NETDEVICES help Say Y here if you want to run your kernel on hardware with a diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 9625cf378931..a7f959e58c3d 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -1,50 +1,9 @@ -config ARCH_MSM - bool - -config ARCH_MSM_DT - bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7 - select ARCH_MSM - select ARCH_REQUIRE_GPIOLIB - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm's devicetree based MSM systems. - if ARCH_MSM -menu "Qualcomm MSM SoC Selection" - depends on ARCH_MSM_DT - -config ARCH_MSM8X60 - bool "Enable support for MSM8X60" - select ARM_GIC - select CPU_V7 - select HAVE_SMP - select MSM_SCM if SMP - select MSM_TIMER - -config ARCH_MSM8960 - bool "Enable support for MSM8960" - select ARM_GIC - select CPU_V7 - select HAVE_SMP - select MSM_SCM if SMP - select MSM_TIMER - -config ARCH_MSM8974 - bool "Enable support for MSM8974" - select ARM_GIC - select CPU_V7 - select HAVE_ARM_ARCH_TIMER - select HAVE_SMP - select MSM_SCM if SMP - -endmenu - choice prompt "Qualcomm MSM SoC Type" default ARCH_MSM7X00A - depends on ARCH_MSM_NODT + depends on ARCH_MSM config ARCH_MSM7X00A bool "MSM7x00A / MSM7x01A" @@ -54,7 +13,7 @@ config ARCH_MSM7X00A select MACH_TROUT if !MACH_HALIBUT select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_SMD_PKG3 config ARCH_MSM7X30 @@ -66,7 +25,7 @@ config ARCH_MSM7X30 select MSM_GPIOMUX select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_VIC config ARCH_QSD8X50 @@ -78,7 +37,7 @@ config ARCH_QSD8X50 select MSM_GPIOMUX select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_VIC endchoice @@ -99,7 +58,7 @@ config MSM_VIC bool menu "Qualcomm MSM Board Type" - depends on ARCH_MSM_NODT + depends on ARCH_MSM config MACH_HALIBUT depends on ARCH_MSM @@ -153,7 +112,4 @@ config MSM_GPIOMUX config MSM_SCM bool -config MSM_TIMER - bool - endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 8e307a10d3c3..27c078a568df 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,4 +1,3 @@ -obj-$(CONFIG_MSM_TIMER) += timer.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o obj-$(CONFIG_MSM_VIC) += irq-vic.o @@ -14,18 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o -obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o - -CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) - -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o -obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h index 33c7725adae2..0a4899b7d85c 100644 --- a/arch/arm/mach-msm/common.h +++ b/arch/arm/mach-msm/common.h @@ -24,7 +24,6 @@ extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, unsigned int mtype, void *caller); extern struct smp_operations msm_smp_ops; -extern void msm_cpu_die(unsigned int cpu); struct msm_mmc_platform_data; diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S deleted file mode 100644 index 6c62c3f82fe6..000000000000 --- a/arch/arm/mach-msm/headsmp.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/arch/arm/mach-realview/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> - -/* - * MSM specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(msm_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup -ENDPROC(msm_secondary_startup) - - .align -1: .long . - .long pen_release diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c deleted file mode 100644 index 326a87261f9a..000000000000 --- a/arch/arm/mach-msm/hotplug.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/smp.h> - -#include <asm/smp_plat.h> - -#include "common.h" - -static inline void cpu_enter_lowpower(void) -{ -} - -static inline void cpu_leave_lowpower(void) -{ -} - -static inline void platform_do_lowpower(unsigned int cpu) -{ - /* Just enter wfi for now. TODO: Properly shut off the cpu. */ - for (;;) { - /* - * here's the WFI - */ - asm("wfi" - : - : - : "memory", "cc"); - - if (pen_release == cpu_logical_map(cpu)) { - /* - * OK, proper wakeup, we're done - */ - break; - } - - /* - * getting here, means that we have come out of WFI without - * having been woken up - this shouldn't happen - * - * The trouble is, letting people know about this is not really - * possible, since we are currently running incoherently, and - * therefore cannot safely call printk() or anything else - */ - pr_debug("CPU%u: spurious wakeup call\n", cpu); - } -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void __ref msm_cpu_die(unsigned int cpu) -{ - /* - * we're ready for shutdown now, so do it - */ - cpu_enter_lowpower(); - platform_do_lowpower(cpu); - - /* - * bring this CPU back into the world of cache - * coherency, and then restore interrupts - */ - cpu_leave_lowpower(); -} diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h deleted file mode 100644 index a62e6b215aec..000000000000 --- a/arch/arm/mach-msm/include/mach/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-msm/include/mach/timex.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_TIMEX_H -#define __ASM_ARCH_MSM_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h deleted file mode 100644 index 0e8c443c723a..000000000000 --- a/arch/arm/mach-mv78xx0/include/mach/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index df9e7d270810..ca004aceaf8e 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -2,15 +2,10 @@ config ARCH_MVEBU bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7 select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select IRQ_DOMAIN - select MULTI_IRQ_HANDLER select PINCTRL select PLAT_ORION - select SPARSE_IRQ - select CLKDEV_LOOKUP select MVEBU_MBUS select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB @@ -25,7 +20,6 @@ menu "Marvell SOC with device tree" config MACH_ARMADA_370_XP bool select ARMADA_370_XP_TIMER - select HAVE_SMP select CACHE_L2X0 select CPU_PJ4B diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 878aebe98dcc..d99846103bbb 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -3,8 +3,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a -obj-y += system-controller.o mvebu-soc-id.o +obj-y += coherency.o coherency_ll.o pmsu.o system-controller.o mvebu-soc-id.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o -obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 5b793ebb0a24..a57cb36d52af 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -32,11 +32,6 @@ #include "coherency.h" #include "mvebu-soc-id.h" -static void __init armada_370_xp_map_io(void) -{ - debug_ll_io_init(); -} - static void __init armada_370_xp_timer_and_clk_init(void) { of_clk_init(NULL); @@ -91,7 +86,6 @@ static const char * const armada_370_xp_dt_compat[] = { DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)") .smp = smp_ops(armada_xp_smp_ops), .init_machine = armada_370_xp_dt_init, - .map_io = armada_370_xp_map_io, .init_time = armada_370_xp_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_370_xp_dt_compat, diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index a7fb89a5b5d9..e6e300afe836 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -54,7 +54,7 @@ static const struct mvebu_system_controller orion_system_controller = { .system_soft_reset = 0x1, }; -static struct of_device_id of_system_controller_table[] = { +static const struct of_device_id of_system_controller_table[] = { { .compatible = "marvell,orion-system-controller", .data = (void *) &orion_system_controller, @@ -90,13 +90,12 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd) static int __init mvebu_system_controller_init(void) { + const struct of_device_id *match; struct device_node *np; - np = of_find_matching_node(NULL, of_system_controller_table); + np = of_find_matching_node_and_match(NULL, of_system_controller_table, + &match); if (np) { - const struct of_device_id *match = - of_match_node(of_system_controller_table, np); - BUG_ON(!match); system_controller_base = of_iomap(np, 0); mvebu_sc = (struct mvebu_system_controller *)match->data; of_node_put(np); diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 8cde9e05b5d6..84794137b175 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -16,11 +16,7 @@ config ARCH_MXS bool "Freescale MXS (i.MX23, i.MX28) support" depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP select CLKSRC_MMIO - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_CLK_PREPARE select PINCTRL select SOC_BUS select SOC_IMX23 diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h deleted file mode 100644 index 1120dd0ba393..000000000000 --- a/arch/arm/mach-netx/include/mach/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/timex.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE 100000000 diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 3177c7a40930..5fb2a590ec17 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -28,6 +28,9 @@ #include <asm/mach/time.h> #include <mach/netx-regs.h> +#define NETX_CLOCK_FREQ 100000000 +#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ) + #define TIMER_CLOCKEVENT 0 #define TIMER_CLOCKSOURCE 1 @@ -41,7 +44,7 @@ static void netx_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - writel(LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); + writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); tmode = NETX_GPIO_COUNTER_CTRL_RST_EN | NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN; @@ -114,7 +117,7 @@ void __init netx_timer_init(void) /* Reset the timer value to zero */ writel(0, NETX_GPIO_COUNTER_CURRENT(0)); - writel(LATCH, NETX_GPIO_COUNTER_MAX(0)); + writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0)); /* acknowledge interrupt */ writel(COUNTER_BIT(0), NETX_GPIO_IRQ); @@ -137,11 +140,11 @@ void __init netx_timer_init(void) NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE)); clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE), - "netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up); + "netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up); /* with max_delta_ns >= delta2ns(0x800) the system currently runs fine. * Adding some safety ... */ netx_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE, + clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ, 0xa00, 0xfffffffe); } diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 4d42da49753c..486d301f43fd 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -6,16 +6,11 @@ config ARCH_NOMADIK select ARM_VIC select CLKSRC_NOMADIK_MTU select CLKSRC_NOMADIK_MTU_SCHED_CLOCK - select CLKSRC_OF - select COMMON_CLK select CPU_ARM926T - select GENERIC_CLOCKEVENTS select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_NOMADIK select PINCTRL_STN8815 - select SPARSE_IRQ - select USE_OF help Support for the Nomadik platform by ST-Ericsson diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig index 59d8f0a70919..bc41f26c1a12 100644 --- a/arch/arm/mach-nspire/Kconfig +++ b/arch/arm/mach-nspire/Kconfig @@ -3,14 +3,9 @@ config ARCH_NSPIRE depends on ARCH_MULTI_V4_V5 depends on MMU select CPU_ARM926T - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select SPARSE_IRQ select ARM_AMBA select ARM_VIC select ARM_TIMER_SP804 - select USE_OF - select CLKSRC_OF help This enables support for systems using the TI-NSPIRE CPU diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h deleted file mode 100644 index 4793790d53cc..000000000000 --- a/arch/arm/mach-omap1/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/timex.h - */ - -#include <plat/timex.h> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index ac4882511749..27fc52d418a5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -6,7 +6,6 @@ config ARCH_OMAP2 depends on ARCH_MULTI_V6 select ARCH_OMAP2PLUS select CPU_V6 - select MULTI_IRQ_HANDLER select SOC_HAS_OMAP2_SDRC config ARCH_OMAP3 @@ -15,8 +14,6 @@ config ARCH_OMAP3 select ARCH_OMAP2PLUS select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM - select CPU_V7 - select MULTI_IRQ_HANDLER select OMAP_INTERCONNECT select PM_OPP if PM select PM_RUNTIME if CPU_IDLE @@ -32,10 +29,8 @@ config ARCH_OMAP4 select ARM_ERRATA_720789 select ARM_GIC select CACHE_L2X0 - select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select OMAP_INTERCONNECT select PL310_ERRATA_588369 select PL310_ERRATA_727915 @@ -51,10 +46,8 @@ config SOC_OMAP5 select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC - select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP @@ -64,16 +57,12 @@ config SOC_AM33XX select ARCH_OMAP2PLUS select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM - select CPU_V7 - select MULTI_IRQ_HANDLER config SOC_AM43XX bool "TI AM43x" depends on ARCH_MULTI_V7 - select CPU_V7 select ARCH_OMAP2PLUS select ARCH_HAS_OPP - select MULTI_IRQ_HANDLER select ARM_GIC select MACH_OMAP_GENERIC @@ -84,8 +73,6 @@ config SOC_DRA7XX select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC - select CPU_V7 - select HAVE_SMP select HAVE_ARM_ARCH_TIMER config ARCH_OMAP2PLUS @@ -96,16 +83,12 @@ config ARCH_OMAP2PLUS select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MACH_OMAP_GENERIC select OMAP_DM_TIMER select PINCTRL select SOC_BUS - select SPARSE_IRQ select TI_PRIV_EDMA - select USE_OF help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h deleted file mode 100644 index de9f8fc40e7c..000000000000 --- a/arch/arm/mach-omap2/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/timex.h - */ - -#include <plat/timex.h> diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h deleted file mode 100644 index 4c69820e0810..000000000000 --- a/arch/arm/mach-orion5x/include/mach/timex.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/timex.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig index b1022f4315f7..eca9eb1c5931 100644 --- a/arch/arm/mach-picoxcell/Kconfig +++ b/arch/arm/mach-picoxcell/Kconfig @@ -1,12 +1,7 @@ config ARCH_PICOXCELL bool "Picochip PicoXcell" if ARCH_MULTI_V6 select ARCH_REQUIRE_GPIOLIB - select ARM_PATCH_PHYS_VIRT select ARM_VIC - select CPU_V6K select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS select HAVE_TCM select NO_IOPORT - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 6988b117fc17..3e8189186a5b 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,9 +1,8 @@ config ARCH_SIRF bool "CSR SiRF" if ARCH_MULTI_V7 + select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select PINCTRL select PINCTRL_SIRF @@ -17,7 +16,6 @@ menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" config ARCH_ATLAS6 bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" default y - select CPU_V7 select SIRF_IRQ help Support for CSR SiRFSoC ARM Cortex A9 Platform @@ -25,7 +23,6 @@ config ARCH_ATLAS6 config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" default y - select CPU_V7 select SIRF_IRQ select ZONE_DMA help @@ -35,9 +32,7 @@ config ARCH_MARCO bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform" default y select ARM_GIC - select CPU_V7 select HAVE_ARM_SCU if SMP - select HAVE_SMP select SMP_ON_UP if SMP help Support for CSR SiRFSoC ARM Cortex A9 Platform diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index d49aff74de98..47c7819edb9b 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -15,7 +15,7 @@ #include <linux/of_platform.h> #include "common.h" -void __init sirfsoc_init_late(void) +static void __init sirfsoc_init_late(void) { sirfsoc_pm_init(); } @@ -27,7 +27,7 @@ static __init void sirfsoc_map_io(void) } #ifdef CONFIG_ARCH_ATLAS6 -static const char *atlas6_dt_match[] __initdata = { +static const char *atlas6_dt_match[] __initconst = { "sirf,atlas6", NULL }; @@ -37,12 +37,11 @@ DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") .map_io = sirfsoc_map_io, .init_late = sirfsoc_init_late, .dt_compat = atlas6_dt_match, - .restart = sirfsoc_restart, MACHINE_END #endif #ifdef CONFIG_ARCH_PRIMA2 -static const char *prima2_dt_match[] __initdata = { +static const char *prima2_dt_match[] __initconst = { "sirf,prima2", NULL }; @@ -53,12 +52,11 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") .dma_zone_size = SZ_256M, .init_late = sirfsoc_init_late, .dt_compat = prima2_dt_match, - .restart = sirfsoc_restart, MACHINE_END #endif #ifdef CONFIG_ARCH_MARCO -static const char *marco_dt_match[] __initdata = { +static const char *marco_dt_match[] __initconst = { "sirf,marco", NULL }; @@ -69,6 +67,5 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") .map_io = sirfsoc_map_io, .init_late = sirfsoc_init_late, .dt_compat = marco_dt_match, - .restart = sirfsoc_restart, MACHINE_END #endif diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h index 4b768060a858..07d3e5ed9264 100644 --- a/arch/arm/mach-prima2/common.h +++ b/arch/arm/mach-prima2/common.h @@ -23,7 +23,6 @@ extern void sirfsoc_secondary_startup(void); extern void sirfsoc_cpu_die(unsigned int cpu); extern void __init sirfsoc_of_irq_init(void); -extern void sirfsoc_restart(enum reboot_mode, const char *); extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs); #ifndef CONFIG_DEBUG_LL diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c index cbcbe9cb094c..c7102539c0b0 100644 --- a/arch/arm/mach-prima2/l2x0.c +++ b/arch/arm/mach-prima2/l2x0.c @@ -11,24 +11,23 @@ #include <linux/of.h> #include <asm/hardware/cache-l2x0.h> -struct l2x0_aux -{ +struct l2x0_aux { u32 val; u32 mask; }; -static struct l2x0_aux prima2_l2x0_aux __initconst = { +static const struct l2x0_aux prima2_l2x0_aux __initconst = { .val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT, .mask = 0, }; -static struct l2x0_aux marco_l2x0_aux __initconst = { +static const struct l2x0_aux marco_l2x0_aux __initconst = { .val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) | (1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT), .mask = L2X0_AUX_CTRL_MASK, }; -static struct of_device_id sirf_l2x0_ids[] __initconst = { +static const struct of_device_id sirf_l2x0_ids[] __initconst = { { .compatible = "sirf,prima2-pl310-cache", .data = &prima2_l2x0_aux, }, { .compatible = "sirf,marco-pl310-cache", .data = &marco_l2x0_aux, }, {}, diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index e358b0736dea..335c12e92262 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -138,9 +138,9 @@ static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus) } struct smp_operations sirfsoc_smp_ops __initdata = { - .smp_prepare_cpus = sirfsoc_smp_prepare_cpus, - .smp_secondary_init = sirfsoc_secondary_init, - .smp_boot_secondary = sirfsoc_boot_secondary, + .smp_prepare_cpus = sirfsoc_smp_prepare_cpus, + .smp_secondary_init = sirfsoc_secondary_init, + .smp_boot_secondary = sirfsoc_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = sirfsoc_cpu_die, #endif diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index ccb53391147a..4887a2a4c698 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -13,57 +13,38 @@ #include <linux/device.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/platform_device.h> #include <linux/reboot.h> +#include <linux/reset-controller.h> -void __iomem *sirfsoc_rstc_base; -static DEFINE_MUTEX(rstc_lock); - -static struct of_device_id rstc_ids[] = { - { .compatible = "sirf,prima2-rstc" }, - { .compatible = "sirf,marco-rstc" }, - {}, -}; +#include <asm/system_misc.h> -static int __init sirfsoc_of_rstc_init(void) -{ - struct device_node *np; +#define SIRFSOC_RSTBIT_NUM 64 - np = of_find_matching_node(NULL, rstc_ids); - if (!np) { - pr_err("unable to find compatible sirf rstc node in dtb\n"); - return -ENOENT; - } - - sirfsoc_rstc_base = of_iomap(np, 0); - if (!sirfsoc_rstc_base) - panic("unable to map rstc cpu registers\n"); - - of_node_put(np); - - return 0; -} -early_initcall(sirfsoc_of_rstc_init); +static void __iomem *sirfsoc_rstc_base; +static DEFINE_MUTEX(rstc_lock); -int sirfsoc_reset_device(struct device *dev) +static int sirfsoc_reset_module(struct reset_controller_dev *rcdev, + unsigned long sw_reset_idx) { - u32 reset_bit; + u32 reset_bit = sw_reset_idx; - if (of_property_read_u32(dev->of_node, "reset-bit", &reset_bit)) + if (reset_bit >= SIRFSOC_RSTBIT_NUM) return -EINVAL; mutex_lock(&rstc_lock); - if (of_device_is_compatible(dev->of_node, "sirf,prima2-rstc")) { + if (of_device_is_compatible(rcdev->of_node, "sirf,prima2-rstc")) { /* * Writing 1 to this bit resets corresponding block. Writing 0 to this * bit de-asserts reset signal of the corresponding block. * datasheet doesn't require explicit delay between the set and clear * of reset bit. it could be shorter if tests pass. */ - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit, + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | (1 << reset_bit), sirfsoc_rstc_base + (reset_bit / 32) * 4); msleep(10); - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit, + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~(1 << reset_bit), sirfsoc_rstc_base + (reset_bit / 32) * 4); } else { /* @@ -73,9 +54,9 @@ int sirfsoc_reset_device(struct device *dev) * datasheet doesn't require explicit delay between the set and clear * of reset bit. it could be shorter if tests pass. */ - writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8); + writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8); msleep(10); - writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); + writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); } mutex_unlock(&rstc_lock); @@ -83,9 +64,57 @@ int sirfsoc_reset_device(struct device *dev) return 0; } +static struct reset_control_ops sirfsoc_rstc_ops = { + .reset = sirfsoc_reset_module, +}; + +static struct reset_controller_dev sirfsoc_reset_controller = { + .ops = &sirfsoc_rstc_ops, + .nr_resets = SIRFSOC_RSTBIT_NUM, +}; + #define SIRFSOC_SYS_RST_BIT BIT(31) -void sirfsoc_restart(enum reboot_mode mode, const char *cmd) +static void sirfsoc_restart(enum reboot_mode mode, const char *cmd) { writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base); } + +static int sirfsoc_rstc_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + sirfsoc_rstc_base = of_iomap(np, 0); + if (!sirfsoc_rstc_base) { + dev_err(&pdev->dev, "unable to map rstc cpu registers\n"); + return -ENOMEM; + } + + sirfsoc_reset_controller.of_node = np; + arm_pm_restart = sirfsoc_restart; + + if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) + reset_controller_register(&sirfsoc_reset_controller); + + return 0; +} + +static const struct of_device_id rstc_ids[] = { + { .compatible = "sirf,prima2-rstc" }, + { .compatible = "sirf,marco-rstc" }, + {}, +}; + +static struct platform_driver sirfsoc_rstc_driver = { + .probe = sirfsoc_rstc_probe, + .driver = { + .name = "sirfsoc_rstc", + .owner = THIS_MODULE, + .of_match_table = rstc_ids, + }, +}; + +static int __init sirfsoc_rstc_init(void) +{ + return platform_driver_register(&sirfsoc_rstc_driver); +} +subsys_initcall(sirfsoc_rstc_init); diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c index 9f2da2eec4dc..a17c88b74fa1 100644 --- a/arch/arm/mach-prima2/rtciobrg.c +++ b/arch/arm/mach-prima2/rtciobrg.c @@ -137,4 +137,4 @@ postcore_initcall(sirfsoc_rtciobrg_init); MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, " "Barry Song <baohua.song@csr.com>"); MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h deleted file mode 100644 index af6760a50e1a..000000000000 --- a/arch/arm/mach-pxa/include/mach/timex.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/timex.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* Various drivers are still using the constant of CLOCK_TICK_RATE, for - * those drivers to at least work, the definition is provided here. - * - * NOTE: this is no longer accurate when multiple processors and boards - * are selected, newer drivers should not depend on this any more. Use - * either the clocksource/clockevent or get this at run-time by calling - * get_clock_tick_rate() (as defined in generic.c). - */ - -#if defined(CONFIG_PXA25x) -/* PXA250/210 timer base */ -#define CLOCK_TICK_RATE 3686400 -#elif defined(CONFIG_PXA27x) -/* PXA27x timer base */ -#ifdef CONFIG_MACH_MAINSTONE -#define CLOCK_TICK_RATE 3249600 -#else -#define CLOCK_TICK_RATE 3250000 -#endif -#else -#define CLOCK_TICK_RATE 3250000 -#endif diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig new file mode 100644 index 000000000000..a028be234334 --- /dev/null +++ b/arch/arm/mach-qcom/Kconfig @@ -0,0 +1,33 @@ +config ARCH_QCOM + bool "Qualcomm Support" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB + select ARM_GIC + select CLKSRC_OF + select GENERIC_CLOCKEVENTS + select HAVE_SMP + select QCOM_SCM if SMP + help + Support for Qualcomm's devicetree based systems. + +if ARCH_QCOM + +menu "Qualcomm SoC Selection" + +config ARCH_MSM8X60 + bool "Enable support for MSM8X60" + select CLKSRC_QCOM + +config ARCH_MSM8960 + bool "Enable support for MSM8960" + select CLKSRC_QCOM + +config ARCH_MSM8974 + bool "Enable support for MSM8974" + select HAVE_ARM_ARCH_TIMER + +endmenu + +config QCOM_SCM + bool + +endif diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile new file mode 100644 index 000000000000..8f756ae1ae31 --- /dev/null +++ b/arch/arm/mach-qcom/Makefile @@ -0,0 +1,5 @@ +obj-y := board.o +obj-$(CONFIG_SMP) += platsmp.o +obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o + +CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-qcom/board.c index 1f11d93e700e..830f69c3a3ce 100644 --- a/arch/arm/mach-msm/board-dt.c +++ b/arch/arm/mach-qcom/board.c @@ -1,4 +1,4 @@ -/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved. +/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -17,10 +17,9 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" +extern struct smp_operations qcom_smp_ops; -static const char * const msm_dt_match[] __initconst = { - "qcom,msm8660-fluid", +static const char * const qcom_dt_match[] __initconst = { "qcom,msm8660-surf", "qcom,msm8960-cdp", NULL @@ -31,11 +30,11 @@ static const char * const apq8074_dt_match[] __initconst = { NULL }; -DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") - .smp = smp_ops(msm_smp_ops), - .dt_compat = msm_dt_match, +DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)") + .smp = smp_ops(qcom_smp_ops), + .dt_compat = qcom_dt_match, MACHINE_END -DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)") +DT_MACHINE_START(APQ_DT, "Qualcomm (Flattened Device Tree)") .dt_compat = apq8074_dt_match, MACHINE_END diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-qcom/platsmp.c index f10a1f58fde9..9c53ea70550d 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -2,6 +2,7 @@ * Copyright (C) 2002 ARM Ltd. * All Rights Reserved * Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2014 The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,42 +13,38 @@ #include <linux/errno.h> #include <linux/delay.h> #include <linux/device.h> -#include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <asm/cacheflush.h> #include <asm/cputype.h> -#include <asm/mach-types.h> #include <asm/smp_plat.h> #include "scm-boot.h" -#include "common.h" #define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0 #define SCSS_CPU1CORE_RESET 0xD80 #define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64 -extern void msm_secondary_startup(void); +extern void secondary_startup(void); static DEFINE_SPINLOCK(boot_lock); +#ifdef CONFIG_HOTPLUG_CPU +static void __ref qcom_cpu_die(unsigned int cpu) +{ + wfi(); +} +#endif + static inline int get_core_count(void) { /* 1 + the PART[1:0] field of MIDR */ return ((read_cpuid_id() >> 4) & 3) + 1; } -static void msm_secondary_init(unsigned int cpu) +static void qcom_secondary_init(unsigned int cpu) { /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - pen_release = -1; - smp_wmb(); - - /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); @@ -57,7 +54,7 @@ static void msm_secondary_init(unsigned int cpu) static void prepare_cold_cpu(unsigned int cpu) { int ret; - ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup), + ret = scm_set_boot_addr(virt_to_phys(secondary_startup), SCM_FLAG_COLDBOOT_CPU1); if (ret == 0) { void __iomem *sc1_base_ptr; @@ -73,9 +70,8 @@ static void prepare_cold_cpu(unsigned int cpu) "address\n"); } -static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int qcom_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; static int cold_boot_done; /* Only need to bring cpu out of reset this way once */ @@ -91,39 +87,19 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) spin_lock(&boot_lock); /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - pen_release = cpu_logical_map(cpu); - sync_cache_w(&pen_release); - - /* * Send the secondary CPU a soft interrupt, thereby causing * the boot monitor to read the system wide flags register, * and branch to the address found there. */ arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - /* * now the secondary core is starting up let it run its * calibrations, then wait for it to finish */ spin_unlock(&boot_lock); - return pen_release != -1 ? -ENOSYS : 0; + return 0; } /* @@ -132,7 +108,7 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) * does not support the ARM SCU, so just set the possible cpu mask to * NR_CPUS. */ -static void __init msm_smp_init_cpus(void) +static void __init qcom_smp_init_cpus(void) { unsigned int i, ncores = get_core_count(); @@ -146,16 +122,16 @@ static void __init msm_smp_init_cpus(void) set_cpu_possible(i, true); } -static void __init msm_smp_prepare_cpus(unsigned int max_cpus) +static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) { } -struct smp_operations msm_smp_ops __initdata = { - .smp_init_cpus = msm_smp_init_cpus, - .smp_prepare_cpus = msm_smp_prepare_cpus, - .smp_secondary_init = msm_secondary_init, - .smp_boot_secondary = msm_boot_secondary, +struct smp_operations qcom_smp_ops __initdata = { + .smp_init_cpus = qcom_smp_init_cpus, + .smp_prepare_cpus = qcom_smp_prepare_cpus, + .smp_secondary_init = qcom_secondary_init, + .smp_boot_secondary = qcom_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU - .cpu_die = msm_cpu_die, + .cpu_die = qcom_cpu_die, #endif }; diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c index 45cee3e469a5..45cee3e469a5 100644 --- a/arch/arm/mach-msm/scm-boot.c +++ b/arch/arm/mach-qcom/scm-boot.c diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h index 7be32ff5d687..7be32ff5d687 100644 --- a/arch/arm/mach-msm/scm-boot.h +++ b/arch/arm/mach-qcom/scm-boot.h diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-qcom/scm.c index c536fd6bf827..c536fd6bf827 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-qcom/scm.c diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-qcom/scm.h index 00b31ea58f29..00b31ea58f29 100644 --- a/arch/arm/mach-msm/scm.h +++ b/arch/arm/mach-qcom/scm.h diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h deleted file mode 100644 index 4eeb069373c2..000000000000 --- a/arch/arm/mach-realview/include/mach/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/timex.h - * - * RealView architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index cf073dea5784..6b2f58645a73 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -6,9 +6,6 @@ config ARCH_ROCKCHIP select ARM_GIC select CACHE_L2X0 select HAVE_ARM_TWD if SMP - select HAVE_SMP - select COMMON_CLK - select GENERIC_CLOCKEVENTS select DW_APB_TIMER_OF select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h deleted file mode 100644 index dd75e7387bbe..000000000000 --- a/arch/arm/mach-rpc/include/mach/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-rpc/include/mach/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * RiscPC architecture timex specifications - */ - -/* - * On the RiscPC, the clock ticks at 2MHz. - */ -#define CLOCK_TICK_RATE 2000000 - diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c index 9a5158861ca9..2689771c1d38 100644 --- a/arch/arm/mach-rpc/time.c +++ b/arch/arm/mach-rpc/time.c @@ -24,6 +24,9 @@ #include <asm/mach/time.h> +#define RPC_CLOCK_FREQ 2000000 +#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ) + static u32 ioc_timer_gettimeoffset(void) { unsigned int count1, count2, status; @@ -46,23 +49,23 @@ static u32 ioc_timer_gettimeoffset(void) * and count2. */ if (status & (1 << 5)) - offset -= LATCH; + offset -= RPC_LATCH; } else if (count2 > count1) { /* * We have just had another interrupt between reading * count1 and count2. */ - offset -= LATCH; + offset -= RPC_LATCH; } - offset = (LATCH - offset) * (tick_nsec / 1000); - return ((offset + LATCH/2) / LATCH) * 1000; + offset = (RPC_LATCH - offset) * (tick_nsec / 1000); + return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000; } void __init ioctime_init(void) { - ioc_writeb(LATCH & 255, IOC_T0LTCHL); - ioc_writeb(LATCH >> 8, IOC_T0LTCHH); + ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL); + ioc_writeb(RPC_LATCH >> 8, IOC_T0LTCHH); ioc_writeb(0, IOC_T0GO); } diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index f2727f2cc661..ba1cc6246778 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -521,7 +521,6 @@ config MACH_ANUBIS select HAVE_PATA_PLATFORM select S3C2440_XTAL_12000000 select S3C24XX_DCLK - select S3C24XX_GPIO_EXTRA64 select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help @@ -562,7 +561,6 @@ config MACH_OSIRIS select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 select S3C24XX_DCLK - select S3C24XX_GPIO_EXTRA128 select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND select S3C_DEV_USB_HOST diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c index d39d3c787580..d1afcf9252d1 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c @@ -30,13 +30,12 @@ #include <linux/mutex.h> #include <linux/delay.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/map.h> #include <mach/hardware.h> - -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c index 11b3b28457bb..192a5b2550b0 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c @@ -31,13 +31,12 @@ #include <linux/mutex.h> #include <linux/delay.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/map.h> #include <mach/hardware.h> - -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index aaf006d1d6dc..5527226fd61f 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -34,6 +34,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <mach/hardware.h> #include <linux/atomic.h> @@ -43,7 +44,6 @@ #include <plat/clock.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> /* S3C2440 extended clock support */ diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 1d77d709ec22..1bc8e73c94f9 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -27,6 +27,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <clocksource/samsung_pwm.h> #include <linux/platform_device.h> #include <linux/delay.h> @@ -44,7 +45,6 @@ #include <asm/mach/map.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> #include <mach/dma.h> #include <plat/cpu.h> @@ -240,7 +240,6 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) } else { samsung_cpu_id = s3c24xx_read_idcode_v4(); } - s3c24xx_init_cpu(); s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c index 30aa53ff07a6..09aa12da1789 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2410.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <mach/map.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/cpu.h> #include <plat/dma-s3c24xx.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index b7e094671522..0c0106d1a4d1 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2412.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c index cd25de28804c..2f8e8a3017df 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2440.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <mach/map.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 95b9f759fe97..f4096ec0700a 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2443.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 2558952e3147..2f39737544c0 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> +#include <linux/serial_s3c.h> #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h index 7b542f7b7938..4d5f5768f700 100644 --- a/arch/arm/plat-samsung/include/plat/rtc-core.h +++ b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h - * +/* * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> * * Samsung RTC Controller core functions @@ -9,19 +8,19 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_RTC_CORE_H -#define __ASM_PLAT_RTC_CORE_H __FILE__ +#ifndef __RTC_CORE_H +#define __RTC_CORE_H __FILE__ /* These functions are only for use with the core support code, such as * the cpu specific initialisation code */ +extern struct platform_device s3c_device_rtc; + /* re-define device name depending on support. */ static inline void s3c_rtc_setname(char *name) { -#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) s3c_device_rtc.name = name; -#endif } -#endif /* __ASM_PLAT_RTC_CORE_H */ +#endif /* __RTC_CORE_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/tick.h b/arch/arm/mach-s3c24xx/include/mach/tick.h deleted file mode 100644 index 544da41979db..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/tick.h +++ /dev/null @@ -1,15 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/include/mach/tick.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C2410 - timer tick support - */ - -#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0)) - -static inline int s3c24xx_ostimer_pending(void) -{ - return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4; -} diff --git a/arch/arm/mach-s3c24xx/include/mach/timex.h b/arch/arm/mach-s3c24xx/include/mach/timex.h deleted file mode 100644 index fe9ca1ffd51b..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 284ea1f44205..8ac9554aa996 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -37,6 +37,7 @@ #include <linux/platform_device.h> #include <linux/proc_fs.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -49,7 +50,6 @@ #include <asm/mach-types.h> #include <mach/fb.h> -#include <plat/regs-serial.h> #include <mach/regs-lcd.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 2a16f8fb3584..81a270af2336 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/gpio.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/i2c.h> @@ -32,7 +33,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index 6beab674c147..d8f6bb1096cb 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/dm9000.h> #include <linux/platform_device.h> @@ -33,7 +34,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index 981ba1eb9fdc..e371ff53a408 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/dm9000.h> #include <linux/ata_platform.h> @@ -55,7 +56,6 @@ #include <plat/cpu-freq.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "bast.h" diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index ee7bb2905a99..dc4db849f0fd 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -35,6 +35,7 @@ #include <linux/workqueue.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/input.h> #include <linux/io.h> #include <linux/i2c.h> @@ -81,7 +82,6 @@ #include <plat/devs.h> #include <plat/gpio-cfg.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index de0832181d8c..e453acd92cbf 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> @@ -62,7 +63,6 @@ #include <plat/gpio-cfg.h> #include <plat/pll.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 67cb8e948b7e..5faa7239e7d6 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/i2c.h> @@ -31,7 +32,6 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <plat/regs-serial.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 1f1559713d8b..9e57fd9f4f3b 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -23,6 +23,7 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/dm9000.h> #include <linux/platform_data/at24.h> #include <linux/platform_device.h> @@ -37,7 +38,6 @@ #include <mach/fb.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <linux/platform_data/leds-s3c24xx.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 997684f17930..4cccaad34847 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -24,6 +24,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/timer.h> #include <linux/io.h> #include <linux/mmc/host.h> @@ -43,7 +44,6 @@ #include <asm/mach/map.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/regs-serial.h> #include <plat/clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 575d28c9e6c6..3066851f584d 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -21,6 +21,7 @@ #include <linux/gpio.h> #include <linux/string.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -38,7 +39,6 @@ //#include <asm/debug-ll.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index f84f2a4c0c6d..a4ae4bb3666d 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -18,6 +18,7 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/clk.h> #include <linux/i2c.h> #include <linux/io.h> @@ -44,7 +45,6 @@ #include <plat/cpu-freq.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 7e16b0740ec1..bdb3faac2d9b 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -15,6 +15,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -32,7 +33,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index b534b76812e3..8c12787a8fd3 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -31,6 +31,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> #include <linux/io.h> @@ -49,7 +50,6 @@ #include <linux/platform_data/leds-s3c24xx.h> #include <mach/regs-lcd.h> -#include <plat/regs-serial.h> #include <mach/fb.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/usb-s3c2410_udc.h> diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 0a5456cda1bc..afb784e934c8 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -21,6 +21,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/device.h> @@ -57,7 +58,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index b36edce8b2b8..e6535ce1bc5c 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -23,6 +23,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/serial.h> #include <linux/io.h> #include <linux/mtd/mtd.h> @@ -49,7 +50,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index f50454a34f72..70f0900d4bca 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -19,13 +19,13 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <asm/mach/arch.h> #include <mach/map.h> #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index a773789e4f38..f32924ee0e9f 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -35,6 +35,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -46,7 +47,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index f5bc721217e3..233fe52d2015 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/gpio.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -33,7 +34,6 @@ #include <asm/mach-types.h> //#include <asm/debug-ll.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index 12023cae4378..b3b54d8e1410 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -18,6 +18,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/partitions.h> @@ -34,7 +35,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/regs-s3c2443-clock.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index de2e5d39a847..d071dcfea548 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -31,7 +32,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index d9933fcc6cc8..06c4d77de3a5 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -31,7 +32,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 7fad8f055cab..4108b2f0cede 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -33,6 +33,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -44,7 +45,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 755df489a45f..1cc5b1bd51cd 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -25,6 +25,7 @@ #include <linux/tty.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -45,7 +46,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "bast.h" diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index f7ec9c550787..40868c0e0a68 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/mtd.h> @@ -32,7 +33,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 052ca23393a7..68ea5b7e5dc7 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -33,9 +33,9 @@ #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> #include <mach/regs-irq.h> diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index ffb92cbca08c..04b58cb49888 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -21,6 +21,7 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/io.h> @@ -37,7 +38,6 @@ #include <plat/cpu-freq.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/cpu.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 0251650cbf80..657cbaca80ac 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -20,6 +20,7 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/reboot.h> @@ -43,7 +44,6 @@ #include <plat/nand-core.h> #include <plat/pll.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/regs-spi.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 8e01b4f2df35..9fe260ae11e1 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -48,6 +48,7 @@ #include <asm/system_misc.h> #include <mach/regs-s3c2443-clock.h> +#include <mach/rtc-core.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -61,7 +62,6 @@ #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> -#include <plat/rtc-core.h> #include <plat/spi-core.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index 886c2147062b..c7a804d0348e 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -34,6 +34,7 @@ #include <asm/system_misc.h> #include <mach/regs-s3c2443-clock.h> +#include <mach/rtc-core.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -43,7 +44,6 @@ #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> -#include <plat/rtc-core.h> #include <plat/spi-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index 911b555029fc..fe30ebb234d2 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -17,6 +17,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/device.h> @@ -35,7 +36,6 @@ #include <plat/cpu-freq.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index dd47c8fa07fa..c9b91223697c 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S @@ -25,13 +25,13 @@ */ #include <linux/linkage.h> +#include <linux/serial_s3c.h> #include <asm/assembler.h> #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include "regs-mem.h" diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S index 7f378b662da6..d833d616bd2e 100644 --- a/arch/arm/mach-s3c24xx/sleep.S +++ b/arch/arm/mach-s3c24xx/sleep.S @@ -25,13 +25,13 @@ */ #include <linux/linkage.h> +#include <linux/serial_s3c.h> #include <asm/assembler.h> #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not * reset the UART configuration, only enable if you really need this! diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 76ab595d849b..5c45aae675b6 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -25,6 +25,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/io.h> @@ -50,7 +51,6 @@ #include <plat/irq-uart.h> #include <plat/pwm-core.h> #include <plat/regs-irqtype.h> -#include <plat/regs-serial.h> #include <plat/watchdog-reset.h> #include "common.h" diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index dd9ccca5de1f..c9b95325b672 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -12,8 +12,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h deleted file mode 100644 index db9c1b1d56a4..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/tick.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/tick.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -#include <linux/irqchip/arm-vic.h> - -/* note, the timer interrutps turn up in 2 places, the vic and then - * the timer block. We take the VIC as the base at the moment. - */ -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0)); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_6400_TICK_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h deleted file mode 100644 index fb2e8cd40829..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c64xx/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index ddf65583a5d8..ae4ea7601f60 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -20,13 +20,13 @@ #include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/of.h> #include <mach/map.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/cpu.h> #include <plat/pm.h> diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index ddeb0e51a962..55eb6a69655b 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -41,7 +42,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 3df3c372ee1f..4b0199fff9f5 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/fb.h> #include <linux/io.h> @@ -51,7 +52,6 @@ #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/regs-serial.h> #include <plat/fb.h> #include <plat/sdhci.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 0431016925b9..72cee08c8bf5 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -33,7 +34,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <mach/gpio-samsung.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 8d553a418e1c..9cbc07602ef3 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -22,6 +22,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/types.h> #include <asm/mach-types.h> @@ -38,7 +39,6 @@ #include <plat/fb.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/mmc-sdhci-s3c.h> -#include <plat/regs-serial.h> #include <plat/sdhci.h> #include <linux/platform_data/touchscreen-s3c2410.h> diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 2067b0bf55b4..67f06a9ae656 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -36,7 +37,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 5152026f0e19..fbad2af1ef16 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -23,6 +23,7 @@ #include <linux/mtd/partitions.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/types.h> #include <asm/mach-types.h> @@ -38,7 +39,6 @@ #include <plat/devs.h> #include <plat/fb.h> #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/regs-serial.h> #include <linux/platform_data/touchscreen-s3c2410.h> #include <video/platform_lcd.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 6e72bd5c1d0c..78dd6f73c072 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/pwm_backlight.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/spi/spi_gpio.h> #include <linux/usb/gpio_vbus.h> #include <linux/platform_data/s3c-hsotg.h> @@ -33,7 +34,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <linux/platform_data/hwmon-s3c.h> -#include <plat/regs-serial.h> #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/sdhci.h> #include <linux/platform_data/touchscreen-s3c2410.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 150f55fb9e33..c85d1cbe769f 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/io.h> @@ -29,8 +30,6 @@ #include <mach/hardware.h> #include <mach/map.h> -#include <plat/regs-serial.h> - #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 43261d24a0a5..c6a8b2ab0240 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/input.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -55,7 +56,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> #include <linux/platform_data/ata-samsung_cf.h> diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 3db0c98222f7..8c42807bf579 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/of.h> @@ -34,7 +35,6 @@ #include <asm/irq.h> #include <plat/cpu-freq.h> -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 72b2278953a8..5be3f09bac92 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/of.h> @@ -35,7 +36,6 @@ #include <asm/irq.h> #include <plat/cpu-freq.h> -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index f07edc304efb..9a43be002d78 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <clocksource/samsung_pwm.h> #include <linux/platform_device.h> #include <linux/sched.h> @@ -50,7 +51,6 @@ #include <plat/gpio-cfg.h> #include <plat/pwm-core.h> #include <plat/regs-irqtype.h> -#include <plat/regs-serial.h> #include <plat/watchdog-reset.h> #include "common.h" diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S index 5e2916fb19a9..8759e7882bcb 100644 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -10,11 +10,10 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <plat/map-base.h> #include <plat/map-s5p.h> -#include <plat/regs-serial.h> - .macro addruart, rp, rv, tmp mov \rp, #0xE0000000 orr \rp, \rp, #0x00100000 diff --git a/arch/arm/mach-s5p64x0/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h deleted file mode 100644 index 4b91faa195a8..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/timex.h +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S5P64X0 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c index d5f0fd66b635..2ed921e095dc 100644 --- a/arch/arm/mach-s5p64x0/irq-pm.c +++ b/arch/arm/mach-s5p64x0/irq-pm.c @@ -14,9 +14,9 @@ #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> -#include <plat/regs-serial.h> #include <plat/pm.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 9efdcc03df3b..6840e197cb2d 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/i2c.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index c3cacc067efe..fa1341c074ca 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/i2c.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index c5a8eeacf81c..6a41bf7dacf6 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <clocksource/samsung_pwm.h> #include <linux/platform_device.h> #include <linux/sched.h> @@ -49,7 +50,6 @@ #include <plat/onenand-core.h> #include <plat/pwm-core.h> #include <plat/spi-core.h> -#include <plat/regs-serial.h> #include <plat/watchdog-reset.h> #include "common.h" diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index 66cb7f16bf2a..22c23859e45e 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -13,8 +13,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h deleted file mode 100644 index 0af8e41230ed..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/tick.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/tick.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S3C64XX - Timer tick support definitions - * - * Based on mach-s3c6400/include/mach/tick.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -#include <linux/irqchip/arm-vic.h> - -/* note, the timer interrutps turn up in 2 places, the vic and then - * the timer block. We take the VIC as the base at the moment. - */ -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h deleted file mode 100644 index 47ffb17aff96..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 9e256b9fc930..668af3ac31f3 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> @@ -37,7 +38,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 26027a29b8a1..7024dcd0e40a 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -24,6 +24,7 @@ #include <linux/sched.h> #include <linux/dma-mapping.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <asm/proc-fns.h> #include <asm/mach/arch.h> @@ -46,7 +47,6 @@ #include <plat/pwm-core.h> #include <plat/tv-core.h> #include <plat/spi-core.h> -#include <plat/regs-serial.h> #include "common.h" diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 80c21996c943..30b511a580aa 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -12,8 +12,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 diff --git a/arch/arm/mach-s5pv210/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h deleted file mode 100644 index 73dc85496a83..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/timex.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/timex.h - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s5p6442/include/mach/timex.h - * - * S5PV210 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index ad40ab0f5dbd..cc37edacda26 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -32,7 +33,6 @@ #include <mach/regs-clock.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index e5cd9fbf19e9..b41a38a75844 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -39,7 +40,6 @@ #include <mach/regs-clock.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 7c0ed07a78a3..448e1d2eeed6 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/i2c.h> #include <linux/device.h> @@ -23,7 +24,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/ata-samsung_cf.h> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index f52cc15c2d85..2a6655fb63e7 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/device.h> #include <linux/dm9000.h> #include <linux/fb.h> @@ -32,7 +33,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/regs-srom.h> #include <plat/gpio-cfg.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 579afe89842a..157805529f26 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -22,7 +23,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/i2c-s3c2410.h> diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h deleted file mode 100644 index 7a5d017b58b3..000000000000 --- a/arch/arm/mach-sa1100/include/mach/timex.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/timex.h - * - * SA1100 architecture timex specifications - * - * Copyright (C) 1998 - */ - -/* - * SA1100 timer - */ -#define CLOCK_TICK_RATE 3686400 diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 4852c08cb526..1dea6cfafb31 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -9,6 +9,7 @@ * */ #include <linux/init.h> +#include <linux/kernel.h> #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -20,6 +21,9 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#define SA1100_CLOCK_FREQ 3686400 +#define SA1100_LATCH DIV_ROUND_CLOSEST(SA1100_CLOCK_FREQ, HZ) + static u64 notrace sa1100_read_sched_clock(void) { return readl_relaxed(OSCR); @@ -93,7 +97,7 @@ static void sa1100_timer_resume(struct clock_event_device *cedev) /* * OSMR0 is the system timer: make sure OSCR is sufficiently behind */ - writel_relaxed(OSMR0 - LATCH, OSCR); + writel_relaxed(OSMR0 - SA1100_LATCH, OSCR); } #else #define sa1100_timer_suspend NULL @@ -128,7 +132,7 @@ void __init sa1100_timer_init(void) setup_irq(IRQ_OST0, &sa1100_timer_irq); - clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32, + clocksource_mmio_init(OSCR, "oscr", SA1100_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up); clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400, MIN_OSCR_DELTA * 2, 0x7fffffff); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 3b8c87461d67..efd53848947d 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -5,18 +5,13 @@ config ARCH_SHMOBILE_MULTI bool "Renesas ARM SoCs" if ARCH_MULTI_V7 depends on MMU select ARCH_SHMOBILE - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select ARM_GIC - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select NO_IOPORT select PINCTRL select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP if ARCH_SHMOBILE_MULTI diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index f1fb89b76786..cabedebd7648 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -47,17 +47,10 @@ #define MD(nr) BIT(nr) -#define FRQMR IOMEM(0xffc80014) #define MSTPCR0 IOMEM(0xffc80030) #define MSTPCR1 IOMEM(0xffc80034) #define MSTPCR3 IOMEM(0xffc8003c) #define MSTPSR1 IOMEM(0xffc80044) -#define MSTPSR4 IOMEM(0xffc80048) -#define MSTPSR6 IOMEM(0xffc8004c) -#define MSTPCR4 IOMEM(0xffc80050) -#define MSTPCR5 IOMEM(0xffc80054) -#define MSTPCR6 IOMEM(0xffc80058) -#define MSTPCR7 IOMEM(0xffc80040) #define MODEMR 0xffcc0020 diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index e31980590eb4..cb8e32deb2a3 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -25,7 +25,6 @@ extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle); extern void shmobile_smp_apmu_cpu_die(unsigned int cpu); extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu); -extern void shmobile_invalidate_start(void); struct clk; extern int shmobile_clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h deleted file mode 100644 index ae0d8d825c23..000000000000 --- a/arch/arm/mach-shmobile/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_MACH_TIMEX_H -#define __ASM_MACH_TIMEX_H - -#define CLOCK_TICK_RATE 1193180 /* unused i8253 PIT value */ - -#endif /* __ASM_MACH_TIMEX_H */ diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index c8f2a1a69a52..c71d667007b8 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -58,7 +58,7 @@ static void __init emev2_add_standard_devices_dt(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char *emev2_boards_compat_dt[] __initdata = { +static const char *emev2_boards_compat_dt[] __initconst = { "renesas,emev2", NULL, }; diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index aee77f06f887..b5f8d75d51a0 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -1,17 +1,10 @@ config ARCH_SOCFPGA bool "Altera SOCFPGA family" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC select CACHE_L2X0 - select COMMON_CLK - select CPU_V7 select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS select GPIO_PL061 if GPIOLIB select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select MFD_SYSCON - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index 308d5b5b3055..0786249b2832 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -8,8 +8,6 @@ menuconfig PLAT_SPEAR select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS if PLAT_SPEAR @@ -18,14 +16,10 @@ config ARCH_SPEAR13XX depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE select ARCH_HAS_CPUFREQ select ARM_GIC - select CPU_V7 select GPIO_SPEAR_SPICS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select PINCTRL - select USE_OF help Supports for ARM's SPEAR13XX family @@ -50,9 +44,7 @@ config ARCH_SPEAR3XX depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE depends on !ARCH_SPEAR13XX select ARM_VIC - select CPU_ARM926T select PINCTRL - select USE_OF help Supports for ARM's SPEAR3XX family @@ -83,14 +75,12 @@ config ARCH_SPEAR6XX depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE depends on !ARCH_SPEAR13XX select ARM_VIC - select CPU_ARM926T help Supports for ARM's SPEAR6XX family config MACH_SPEAR600 def_bool y depends on ARCH_SPEAR6XX - select USE_OF help Supports ST SPEAr600 boards configured via the device-tree diff --git a/arch/arm/mach-spear/include/mach/timex.h b/arch/arm/mach-spear/include/mach/timex.h deleted file mode 100644 index ef95e5b780bd..000000000000 --- a/arch/arm/mach-spear/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/timex.h - * - * SPEAr platform specific timex definitions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_TIMEX_H -#define __PLAT_TIMEX_H - -#define CLOCK_TICK_RATE 48000000 - -#endif /* __PLAT_TIMEX_H */ diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index d71654bc8d54..d2c13ba1190b 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,14 +1,10 @@ menuconfig ARCH_STI bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7 - select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP select ARM_GIC select ARM_GLOBAL_TIMER select PINCTRL select PINCTRL_ST select MFD_SYSCON - select MIGHT_HAVE_CACHE_L2X0 - select HAVE_SMP select HAVE_ARM_SCU if SMP select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index b9d6cad8669b..9de27cfa688f 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -5,14 +5,9 @@ config ARCH_SUNXI select ARM_GIC select ARM_PSCI select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select HAVE_SMP select PINCTRL select PINCTRL_SUNXI select RESET_CONTROLLER - select SPARSE_IRQ select SUN4I_TIMER select SUN5I_HSTIMER diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 4926bd11f190..92d660f9610f 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -5,23 +5,15 @@ config ARCH_TEGRA select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARM_GIC select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PINCTRL select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER select SOC_BUS - select SPARSE_IRQ select USB_ULPI if USB_PHY select USB_ULPI_VIEWPORT if USB_PHY - select USE_OF help This enables support for NVIDIA Tegra based systems. diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 8e23071bd1b3..e3a96d7302e9 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -3,20 +3,14 @@ config ARCH_U300 depends on MMU select ARCH_REQUIRE_GPIOLIB select ARM_AMBA - select ARM_PATCH_PHYS_VIRT select ARM_VIC select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK select CPU_ARM926T - select GENERIC_CLOCKEVENTS select HAVE_TCM select PINCTRL select PINCTRL_COH901 select PINCTRL_U300 - select SPARSE_IRQ select MFD_SYSCON - select USE_OF help Support for ST-Ericsson U300 series mobile platforms. diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 0034d2cd6973..8052bd52450d 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -11,13 +11,8 @@ config ARCH_U8500 select ARM_GIC select CACHE_L2X0 select CLKSRC_NOMADIK_MTU - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_ABX500 select PINCTRL_NOMADIK @@ -76,7 +71,6 @@ config UX500_AUTO_PLATFORM config MACH_UX500_DT bool "Generic U8500 support using device tree" depends on MACH_MOP500 - select USE_OF endmenu diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h deleted file mode 100644 index 426199b1add5..000000000000 --- a/arch/arm/mach-versatile/include/mach/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/timex.h - * - * Versatile architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 4a70be485ff8..80b4be36f10a 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -5,16 +5,11 @@ config ARCH_VEXPRESS select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 - select COMMON_CLK select COMMON_CLK_VERSATILE - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_PATA_PLATFORM - select HAVE_SMP select ICST - select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select PLAT_VERSATILE select PLAT_VERSATILE_CLCD diff --git a/arch/arm/mach-virt/Kconfig b/arch/arm/mach-virt/Kconfig deleted file mode 100644 index 081d46929436..000000000000 --- a/arch/arm/mach-virt/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config ARCH_VIRT - bool "Dummy Virtual Machine" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - select HAVE_ARM_ARCH_TIMER - select ARM_PSCI - select HAVE_SMP - select CPU_V7 - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-virt/Makefile b/arch/arm/mach-virt/Makefile deleted file mode 100644 index 7ddbfa60227f..000000000000 --- a/arch/arm/mach-virt/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the linux kernel. -# - -obj-y := virt.o diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c deleted file mode 100644 index b184e57d1854..000000000000 --- a/arch/arm/mach-virt/virt.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Dummy Virtual Machine - does what it says on the tin. - * - * Copyright (C) 2012 ARM Ltd - * Authors: Will Deacon <will.deacon@arm.com>, - * Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/smp.h> - -#include <asm/mach/arch.h> - -static void __init virt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *virt_dt_match[] = { - "linux,dummy-virt", - "xen,xenvm", - NULL -}; - -DT_MACHINE_START(VIRT, "Dummy Virtual Machine") - .init_machine = virt_init, - .dt_compat = virt_dt_match, -MACHINE_END diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index 927be93b692e..08f56a41cb55 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -3,8 +3,6 @@ config ARCH_VT8500 select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select CLKSRC_OF - select GENERIC_CLOCKEVENTS select VT8500_TIMER select PINCTRL help @@ -21,7 +19,6 @@ config ARCH_WM8750 bool "WonderMedia WM8750" depends on ARCH_MULTI_V6 select ARCH_VT8500 - select CPU_V6 help Support for WonderMedia WM8750 System-on-Chip. @@ -29,6 +26,5 @@ config ARCH_WM8850 bool "WonderMedia WM8850" depends on ARCH_MULTI_V7 select ARCH_VT8500 - select CPU_V7 help Support for WonderMedia WM8850 System-on-Chip. diff --git a/arch/arm/mach-w90x900/include/mach/timex.h b/arch/arm/mach-w90x900/include/mach/timex.h deleted file mode 100644 index 164dce0b64db..000000000000 --- a/arch/arm/mach-w90x900/include/mach/timex.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/timex.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/timex.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE Now, I don't use it. */ - -#define CLOCK_TICK_RATE 15000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index f03e75bd0b2b..0e001a489a79 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -4,16 +4,9 @@ config ARCH_ZYNQ select ARM_GIC select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ICST - select MIGHT_HAVE_CACHE_L2X0 - select USE_OF - select HAVE_SMP - select SPARSE_IRQ select CADENCE_TTC_TIMER select ARM_GLOBAL_TIMER if !CPU_FREQ help diff --git a/arch/arm/plat-omap/include/plat/timex.h b/arch/arm/plat-omap/include/plat/timex.h deleted file mode 100644 index e27d2daa7790..000000000000 --- a/arch/arm/plat-omap/include/plat/timex.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/timex.h - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#if !defined(__ASM_ARCH_OMAP_TIMEX_H) -#define __ASM_ARCH_OMAP_TIMEX_H - -#define CLOCK_TICK_RATE (HZ * 100000UL) - -#endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 47c9fad43f00..ddfebddb4105 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -52,7 +52,7 @@ #include <plat/cpu.h> #include <linux/serial_core.h> -#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */ +#include <linux/serial_s3c.h> /* for s3c24xx_uart_devs */ /* clock information */ diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c index 46b426e8aff5..364963a0a344 100644 --- a/arch/arm/plat-samsung/cpu.c +++ b/arch/arm/plat-samsung/cpu.c @@ -28,13 +28,6 @@ unsigned int samsung_rev(void) } EXPORT_SYMBOL(samsung_rev); -void __init s3c24xx_init_cpu(void) -{ - /* nothing here yet */ - - samsung_cpu_rev = 0; -} - void __init s3c64xx_init_cpu(void) { samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index ac07e871f6a7..c64a39ac1b04 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -18,6 +18,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/slab.h> @@ -64,7 +65,6 @@ #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/usb-phy.h> -#include <plat/regs-serial.h> #include <plat/regs-spi.h> #include <linux/platform_data/spi-s3c64xx.h> @@ -744,10 +744,7 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210() || - soc_is_exynos4212() || soc_is_exynos4412()) - pd->bus_num = 8; - else if (soc_is_s5pv210()) + if (soc_is_s5pv210()) pd->bus_num = 3; else pd->bus_num = 0; @@ -764,10 +761,7 @@ void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, { struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; - if (soc_is_exynos4210() || - soc_is_exynos4212() || soc_is_exynos4412()) - pd->hdmiphy_bus = 8; - else if (soc_is_s5pv210()) + if (soc_is_s5pv210()) pd->hdmiphy_bus = 3; else pd->hdmiphy_bus = 0; diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 335beb341355..31164b34d4c4 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -199,7 +199,6 @@ extern void s5p_init_irq(u32 *vic, u32 num_vic); extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); -extern void s3c24xx_init_cpu(void); extern void s3c64xx_init_cpu(void); extern void s5p_init_cpu(void __iomem *cpuid_addr); diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h deleted file mode 100644 index f05f2afa440d..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ /dev/null @@ -1 +0,0 @@ -#include <linux/serial_s3c.h> diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index f48dc0a4736c..61054fd88d43 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -29,7 +29,7 @@ static void arch_detect_cpu(void); /* defines for UART registers */ -#include <plat/regs-serial.h> +#include <linux/serial_s3c.h> /* working in physical space... */ #define S3C_WDOGREG(x) ((S3C_PA_WDT + (x))) diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index a30df396ca34..c32df1f202eb 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -21,6 +21,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/of.h> @@ -33,8 +34,6 @@ #include <plat/devs.h> #include <plat/clock.h> -#include <plat/regs-serial.h> - static struct cpu_table *cpu; static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode, diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index dd4c15d0d68f..da268813901b 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -196,8 +196,7 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = { .resume = samsung_gpio_pm_2bit_resume, }; -#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) \ - || defined(CONFIG_ARCH_EXYNOS) +#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); @@ -307,7 +306,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = { .save = samsung_gpio_pm_4bit_save, .resume = samsung_gpio_pm_4bit_resume, }; -#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P || CONFIG_ARCH_EXYNOS */ +#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ /** * samsung_pm_save_gpio() - save gpio chip data for suspend diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index e5b0f2c2d884..ae9baa2d6381 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -18,13 +18,12 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/cacheflush.h> #include <asm/suspend.h> -#include <plat/regs-serial.h> - #ifdef CONFIG_SAMSUNG_ATAGS #include <mach/hardware.h> #include <mach/map.h> diff --git a/arch/arm/plat-samsung/s5p-irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c index 591498035916..52b16943617e 100644 --- a/arch/arm/plat-samsung/s5p-irq-pm.c +++ b/arch/arm/plat-samsung/s5p-irq-pm.c @@ -22,10 +22,7 @@ #include <mach/map.h> #include <mach/regs-gpio.h> - -#ifndef CONFIG_ARCH_EXYNOS #include <mach/regs-irq.h> -#endif /* state for IRQs over sleep */ @@ -43,18 +40,8 @@ int s3c_irq_wake(struct irq_data *data, unsigned int state) unsigned long irqbit; unsigned int irq_rtc_tic, irq_rtc_alarm; -#ifdef CONFIG_ARCH_EXYNOS - if (soc_is_exynos5250()) { - irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC; - irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM; - } else { - irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC; - irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM; - } -#else irq_rtc_tic = IRQ_RTC_TIC; irq_rtc_alarm = IRQ_RTC_ALARM; -#endif if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) { irqbit = 1 << (data->irq + 1 - irq_rtc_alarm); diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 52e9329e3c51..96918e1f26a3 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -188,3 +188,6 @@ config EM_TIMER_STI This enables build of a clocksource and clockevent driver for the 48-bit System Timer (STI) hardware available on a SoCs such as EMEV2 from former NEC Electronics. + +config CLKSRC_QCOM + bool diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index f3fe4cb4974b..98cb6c51aa87 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o +obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index c2e390efbdca..a6ee6d7cd63f 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -25,8 +25,6 @@ #include <linux/of_address.h> #include <linux/clocksource.h> -#include <asm/mach/time.h> - #define EXYNOS4_MCTREG(x) (x) #define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100) #define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104) diff --git a/arch/arm/mach-msm/timer.c b/drivers/clocksource/qcom-timer.c index fd1644987534..e807acf4c665 100644 --- a/arch/arm/mach-msm/timer.c +++ b/drivers/clocksource/qcom-timer.c @@ -1,7 +1,7 @@ /* * * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. + * Copyright (c) 2009-2012,2014, The Linux Foundation. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -26,10 +26,6 @@ #include <linux/of_irq.h> #include <linux/sched_clock.h> -#include <asm/mach/time.h> - -#include "common.h" - #define TIMER_MATCH_VAL 0x0000 #define TIMER_COUNT_VAL 0x0004 #define TIMER_ENABLE 0x0008 @@ -110,15 +106,6 @@ static notrace cycle_t msm_read_timer_count(struct clocksource *cs) return readl_relaxed(source_base + TIMER_COUNT_VAL); } -static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs) -{ - /* - * Shift timer count down by a constant due to unreliable lower bits - * on some targets. - */ - return msm_read_timer_count(cs) >> MSM_DGT_SHIFT; -} - static struct clocksource msm_clocksource = { .name = "dg_timer", .rating = 300, @@ -232,7 +219,7 @@ err: sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz); } -#ifdef CONFIG_OF +#ifdef CONFIG_ARCH_QCOM static void __init msm_dt_timer_init(struct device_node *np) { u32 freq; @@ -285,7 +272,7 @@ static void __init msm_dt_timer_init(struct device_node *np) } CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init); CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init); -#endif +#else static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source, u32 sts) @@ -305,6 +292,15 @@ static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source, return 0; } +static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs) +{ + /* + * Shift timer count down by a constant due to unreliable lower bits + * on some targets. + */ + return msm_read_timer_count(cs) >> MSM_DGT_SHIFT; +} + void __init msm7x01_timer_init(void) { struct clocksource *cs = &msm_clocksource; @@ -331,3 +327,4 @@ void __init qsd8x50_timer_init(void) return; msm_timer_init(19200000 / 4, 32, 7, false); } +#endif diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c index 09a17d9a6594..b52e1c078b99 100644 --- a/drivers/clocksource/timer-marco.c +++ b/drivers/clocksource/timer-marco.c @@ -19,7 +19,8 @@ #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/sched_clock.h> -#include <asm/mach/time.h> + +#define MARCO_CLOCK_FREQ 1000000 #define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000 #define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004 @@ -191,7 +192,7 @@ static int sirfsoc_local_timer_setup(struct clock_event_device *ce) ce->rating = 200; ce->set_mode = sirfsoc_timer_set_mode; ce->set_next_event = sirfsoc_timer_set_next_event; - clockevents_calc_mult_shift(ce, CLOCK_TICK_RATE, 60); + clockevents_calc_mult_shift(ce, MARCO_CLOCK_FREQ, 60); ce->max_delta_ns = clockevent_delta2ns(-2, ce); ce->min_delta_ns = clockevent_delta2ns(2, ce); ce->cpumask = cpumask_of(cpu); @@ -263,11 +264,11 @@ static void __init sirfsoc_marco_timer_init(void) BUG_ON(IS_ERR(clk)); rate = clk_get_rate(clk); - BUG_ON(rate < CLOCK_TICK_RATE); - BUG_ON(rate % CLOCK_TICK_RATE); + BUG_ON(rate < MARCO_CLOCK_FREQ); + BUG_ON(rate % MARCO_CLOCK_FREQ); /* Initialize the timer dividers */ - timer_div = rate / CLOCK_TICK_RATE - 1; + timer_div = rate / MARCO_CLOCK_FREQ - 1; writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL); writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL); @@ -283,7 +284,7 @@ static void __init sirfsoc_marco_timer_init(void) /* Clear all interrupts */ writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); + BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, MARCO_CLOCK_FREQ)); sirfsoc_clockevent_init(); } diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c index 8a492d34ff9f..1a6b2d6356d6 100644 --- a/drivers/clocksource/timer-prima2.c +++ b/drivers/clocksource/timer-prima2.c @@ -21,6 +21,8 @@ #include <linux/sched_clock.h> #include <asm/mach/time.h> +#define PRIMA2_CLOCK_FREQ 1000000 + #define SIRFSOC_TIMER_COUNTER_LO 0x0000 #define SIRFSOC_TIMER_COUNTER_HI 0x0004 #define SIRFSOC_TIMER_MATCH_0 0x0008 @@ -173,7 +175,7 @@ static u64 notrace sirfsoc_read_sched_clock(void) static void __init sirfsoc_clockevent_init(void) { sirfsoc_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE, + clockevents_config_and_register(&sirfsoc_clockevent, PRIMA2_CLOCK_FREQ, 2, -2); } @@ -190,8 +192,8 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) rate = clk_get_rate(clk); - BUG_ON(rate < CLOCK_TICK_RATE); - BUG_ON(rate % CLOCK_TICK_RATE); + BUG_ON(rate < PRIMA2_CLOCK_FREQ); + BUG_ON(rate % PRIMA2_CLOCK_FREQ); sirfsoc_timer_base = of_iomap(np, 0); if (!sirfsoc_timer_base) @@ -199,14 +201,16 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0); - writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV); + writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1, + sirfsoc_timer_base + SIRFSOC_TIMER_DIV); writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); + BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, + PRIMA2_CLOCK_FREQ)); - sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE); + sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ); BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c index 17ccba88d636..ed8e5e8449d3 100644 --- a/drivers/input/misc/ixp4xx-beeper.c +++ b/drivers/input/misc/ixp4xx-beeper.c @@ -67,7 +67,7 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned } if (value > 20 && value < 32767) - count = (IXP4XX_TIMER_FREQ / (value * 4)) - 1; + count = (ixp4xx_timer_freq / (value * 4)) - 1; ixp4xx_spkr_control(pin, count); diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c index 40e6440348ff..f8636a650cf6 100644 --- a/drivers/irqchip/exynos-combiner.c +++ b/drivers/irqchip/exynos-combiner.c @@ -17,7 +17,6 @@ #include <linux/irqchip/chained_irq.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <asm/mach/irq.h> #include "irqchip.h" @@ -81,7 +80,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) cascade_irq = irq_find_mapping(combiner_irq_domain, combiner_irq); if (unlikely(!cascade_irq)) - do_bad_IRQ(irq, desc); + handle_bad_irq(irq, desc); else generic_handle_irq(cascade_irq); diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c index 3c8827fe83f3..1c3e2c9b46ba 100644 --- a/drivers/irqchip/irq-mmp.c +++ b/drivers/irqchip/irq-mmp.c @@ -22,7 +22,7 @@ #include <linux/of_irq.h> #include <asm/exception.h> -#include <asm/mach/irq.h> +#include <asm/hardirq.h> #include "irqchip.h" diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 309b8b342d9c..596374304532 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -24,7 +24,7 @@ #include <mach/at91_rtt.h> #include <mach/cpu.h> - +#include <mach/hardware.h> /* * This driver uses two configurable hardware resources that live in the diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c index a355f2b82bb8..cccbf9d89729 100644 --- a/drivers/rtc/rtc-pxa.c +++ b/drivers/rtc/rtc-pxa.c @@ -32,7 +32,6 @@ #include <mach/hardware.h> -#define TIMER_FREQ CLOCK_TICK_RATE #define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 #define MAXFREQ_PERIODIC 1000 diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index b0603e1f7d82..53eeea13ff16 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -35,21 +35,18 @@ #include <linux/platform_device.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/dma-mapping.h> #include <linux/atmel_pdc.h> #include <linux/atmel_serial.h> #include <linux/uaccess.h> #include <linux/platform_data/atmel.h> #include <linux/timer.h> +#include <linux/gpio.h> #include <asm/io.h> #include <asm/ioctls.h> -#ifdef CONFIG_ARM -#include <mach/cpu.h> -#include <asm/gpio.h> -#endif - #define PDC_BUFFER_SIZE 512 /* Revisit: We should calculate this based on the actual port settings */ #define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ @@ -165,6 +162,7 @@ struct atmel_uart_port { struct circ_buf rx_ring; struct serial_rs485 rs485; /* rs485 settings */ + int rts_gpio; /* optional RTS GPIO */ unsigned int tx_done_mask; bool is_usart; /* usart or uart */ struct timer_list uart_timer; /* uart timer */ @@ -298,20 +296,16 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) unsigned int mode; struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); -#ifdef CONFIG_ARCH_AT91RM9200 - if (cpu_is_at91rm9200()) { - /* - * AT91RM9200 Errata #39: RTS0 is not internally connected - * to PA21. We need to drive the pin manually. - */ - if (port->mapbase == AT91RM9200_BASE_US0) { - if (mctrl & TIOCM_RTS) - at91_set_gpio_value(AT91_PIN_PA21, 0); - else - at91_set_gpio_value(AT91_PIN_PA21, 1); - } + /* + * AT91RM9200 Errata #39: RTS0 is not internally connected + * to PA21. We need to drive the pin as a GPIO. + */ + if (gpio_is_valid(atmel_port->rts_gpio)) { + if (mctrl & TIOCM_RTS) + gpio_set_value(atmel_port->rts_gpio, 0); + else + gpio_set_value(atmel_port->rts_gpio, 1); } -#endif if (mctrl & TIOCM_RTS) control |= ATMEL_US_RTSEN; @@ -2365,6 +2359,25 @@ static int atmel_serial_probe(struct platform_device *pdev) port = &atmel_ports[ret]; port->backup_imr = 0; port->uart.line = ret; + port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */ + if (pdata) + port->rts_gpio = pdata->rts_gpio; + else if (np) + port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0); + + if (gpio_is_valid(port->rts_gpio)) { + ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS"); + if (ret) { + dev_err(&pdev->dev, "error requesting RTS GPIO\n"); + goto err; + } + /* Default to 1 as RTS is active low */ + ret = gpio_direction_output(port->rts_gpio, 1); + if (ret) { + dev_err(&pdev->dev, "error setting up RTS GPIO\n"); + goto err; + } + } ret = atmel_init_port(port, pdev); if (ret) diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index cea9f70133c5..e26b0c14edea 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -84,6 +84,7 @@ struct atmel_uart_data { short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virt. base address, if any */ struct serial_rs485 rs485; /* rs485 settings */ + int rts_gpio; /* optional RTS GPIO */ }; /* Touchscreen Controller */ |