diff options
author | Stafford Horne <shorne@gmail.com> | 2017-10-21 22:39:09 +0900 |
---|---|---|
committer | Stafford Horne <shorne@gmail.com> | 2017-10-30 21:37:53 +0900 |
commit | e4082de21c5c4f9001b8e44b39b5e72f7ed3b2a7 (patch) | |
tree | d63023ddbcc7d203479a553759aa40b186502017 | |
parent | 00aa61d36da1969b139dc10b9b555677ebb03c42 (diff) | |
download | linux-e4082de21c5c4f9001b8e44b39b5e72f7ed3b2a7.tar.bz2 |
Documentation: openrisc: Updates to README
Update the OpenRISC readme to provide some more up-to-date information
on how to get started with OpenRISC. This includes:
- remove references to southpole who no longer are consulting for
OpenRISC (confirmed with Jonas)
- suggested QEMU instead of the old or1ksim as QEMU is well supported
- include instructions on how to get an FPGA board running
Suggested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Stafford Horne <shorne@gmail.com>
-rw-r--r-- | Documentation/openrisc/README | 65 |
1 files changed, 38 insertions, 27 deletions
diff --git a/Documentation/openrisc/README b/Documentation/openrisc/README index 072069ab5100..777a893d533d 100644 --- a/Documentation/openrisc/README +++ b/Documentation/openrisc/README @@ -7,13 +7,7 @@ target architecture, specifically, is the 32-bit OpenRISC 1000 family (or1k). For information about OpenRISC processors and ongoing development: website http://openrisc.io - -For more information about Linux on OpenRISC, please contact South Pole AB. - - email: info@southpole.se - - website: http://southpole.se - http://southpoleconsulting.com + email openrisc@lists.librecores.org --------------------------------------------------------------------- @@ -24,37 +18,54 @@ In order to build and run Linux for OpenRISC, you'll need at least a basic toolchain and, perhaps, the architectural simulator. Steps to get these bits in place are outlined here. -1) The toolchain can be obtained from openrisc.io. Instructions for building -a toolchain can be found at: +1) Toolchain + +Toolchain binaries can be obtained from openrisc.io or our github releases page. +Instructions for building the different toolchains can be found on openrisc.io +or Stafford's toolchain build and release scripts. + + binaries https://github.com/openrisc/or1k-gcc/releases + toolchains https://openrisc.io/software + building https://github.com/stffrdhrn/or1k-toolchain-build -https://github.com/openrisc/tutorials +2) Building -2) or1ksim (optional) +Build the Linux kernel as usual -or1ksim is the architectural simulator which will allow you to actually run -your OpenRISC Linux kernel if you don't have an OpenRISC processor at hand. + make ARCH=openrisc defconfig + make ARCH=openrisc - git clone https://github.com/openrisc/or1ksim.git +3) Running on FPGA (optional) - cd or1ksim - ./configure --prefix=$OPENRISC_PREFIX - make - make install +The OpenRISC community typically uses FuseSoC to manage building and programming +an SoC into an FPGA. The below is an example of programming a De0 Nano +development board with the OpenRISC SoC. During the build FPGA RTL is code +downloaded from the FuseSoC IP cores repository and built using the FPGA vendor +tools. Binaries are loaded onto the board with openocd. -3) Linux kernel + git clone https://github.com/olofk/fusesoc + cd fusesoc + sudo pip install -e . -Build the kernel as usual + fusesoc init + fusesoc build de0_nano + fusesoc pgm de0_nano - make ARCH=openrisc defconfig - make ARCH=openrisc + openocd -f interface/altera-usb-blaster.cfg \ + -f board/or1k_generic.cfg + + telnet localhost 4444 + > init + > halt; load_image vmlinux ; reset -4) Run in architectural simulator +4) Running on a Simulator (optional) -Grab the or1ksim platform configuration file (from the or1ksim source) and -together with your freshly built vmlinux, run your kernel with the following -incantation: +QEMU is a processor emulator which we recommend for simulating the OpenRISC +platform. Please follow the OpenRISC instructions on the QEMU website to get +Linux running on QEMU. You can build QEMU yourself, but your Linux distribution +likely provides binary packages to support OpenRISC. - sim -f arch/openrisc/or1ksim.cfg vmlinux + qemu openrisc https://wiki.qemu.org/Documentation/Platforms/OpenRISC --------------------------------------------------------------------- |