summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDamien Le Moal <damien.lemoal@opensource.wdc.com>2021-11-04 17:31:58 +0900
committerDamien Le Moal <damien.lemoal@opensource.wdc.com>2021-11-11 10:55:32 +0900
commit68dbbe7d5b4fde736d104cbbc9a2fce875562012 (patch)
tree9527c73e3eccb5950a1e7c08f29ed977e49a3c76
parentdebe436e77c72fcee804fb867f275e6d31aa999c (diff)
downloadlinux-68dbbe7d5b4fde736d104cbbc9a2fce875562012.tar.bz2
libata: fix read log timeout value
Some ATA drives are very slow to respond to READ_LOG_EXT and READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the device is revalidated right after resuming a system or inserting the ATA adapter driver (e.g. ahci). The default 5s timeout (ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing errors during the device configuration. Ex: ... ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209 ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133 ata9.00: qc timeout (cmd 0x2f) ata9.00: Read log page 0x00 failed, Emask 0x4 ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log page 0x08 failed, Emask 0x40 ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: ATA Identify Device Log not supported ata9.00: failed to set xfermode (err_mask=0x40) ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: configured for UDMA/133 ... The timeout error causes a soft reset of the drive link, followed in most cases by a successful revalidation as that give enough time to the drive to become fully ready to quickly process the read log commands. However, in some cases, this also fails resulting in the device being dropped. Fix this by using adding the ata_eh_revalidate_timeouts entries for the READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout increased to 15s, retriable one time. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
-rw-r--r--drivers/ata/libata-eh.c8
-rw-r--r--include/linux/libata.h2
2 files changed, 9 insertions, 1 deletions
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index bf9c4b6c5c3d..1d4a6f1e88cd 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -93,6 +93,12 @@ static const unsigned long ata_eh_identify_timeouts[] = {
ULONG_MAX,
};
+static const unsigned long ata_eh_revalidate_timeouts[] = {
+ 15000, /* Some drives are slow to read log pages when waking-up */
+ 15000, /* combined time till here is enough even for media access */
+ ULONG_MAX,
+};
+
static const unsigned long ata_eh_flush_timeouts[] = {
15000, /* be generous with flush */
15000, /* ditto */
@@ -129,6 +135,8 @@ static const struct ata_eh_cmd_timeout_ent
ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = {
{ .commands = CMDS(ATA_CMD_ID_ATA, ATA_CMD_ID_ATAPI),
.timeouts = ata_eh_identify_timeouts, },
+ { .commands = CMDS(ATA_CMD_READ_LOG_EXT, ATA_CMD_READ_LOG_DMA_EXT),
+ .timeouts = ata_eh_revalidate_timeouts, },
{ .commands = CMDS(ATA_CMD_READ_NATIVE_MAX, ATA_CMD_READ_NATIVE_MAX_EXT),
.timeouts = ata_eh_other_timeouts, },
{ .commands = CMDS(ATA_CMD_SET_MAX, ATA_CMD_SET_MAX_EXT),
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 2884383f1718..5331557316e8 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -394,7 +394,7 @@ enum {
/* This should match the actual table size of
* ata_eh_cmd_timeout_table in libata-eh.c.
*/
- ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6,
+ ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 7,
/* Horkage types. May be set by libata or controller on drives
(some horkage may be drive/controller pair dependent */