Merge tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of USB driver fixes for 5.7-rc3.

  Nothing huge, just the usual collection of:

   - xhci fixes

   - gadget driver fixes

   - syzkaller fuzzing fixes

   - new device ids and DT bindings

   - new quirks added for broken devices

  A few of the gadget driver fixes show up twice here as they were
  applied to my branch, and also by Felipe to his branch which I then
  pulled in as we got out of sync a bit.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  USB: sisusbvga: Change port variable from signed to unsigned
  usb-storage: Add unusual_devs entry for JMicron JMS566
  USB: hub: Revert commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices")
  USB: hub: Fix handling of connect changes during sleep
  usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer
  xhci: Don't clear hub TT buffer on ep0 protocol stall
  xhci: prevent bus suspend if a roothub port detected a over-current condition
  xhci: Fix handling halted endpoint even if endpoint ring appears empty
  usb: raw-gadget: Fix copy_to/from_user() checks
  usb: raw-gadget: fix raw_event_queue_fetch locking
  usb: gadget: udc: atmel: Fix vbus disconnect handling
  usb: dwc3: gadget: Fix request completion check
  USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE
  phy: tegra: Select USB_COMMON for usb_get_maximum_speed()
  usb: typec: tcpm: Ignore CC and vbus changes in PORT_RESET change
  usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset()
  cdc-acm: introduce a cool down
  cdc-acm: close race betrween suspend() and acm_softint
  UAS: fix deadlock in error handling and PM flushing work
  UAS: no use logging any details in case of ENODEV
  ...

29 files changed, 349 insertions, 121 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index f2a93c8679e8..7bc83f3d9bdf 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5187,8 +5187,7 @@
 
 	usbcore.old_scheme_first=
 			[USB] Start with the old device initialization
-			scheme,  applies only to low and full-speed devices
-			 (default 0 = off).
+			scheme (default 0 = off).
 
 	usbcore.usbfs_memory_mb=
 			[USB] Memory limit (in MB) for buffers allocated by
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
index 92d8631b9aa6..031452aa25bc 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
@@ -18,6 +18,7 @@ properties:
           - renesas,r8a774c0-usb3-peri # RZ/G2E
           - renesas,r8a7795-usb3-peri  # R-Car H3
           - renesas,r8a7796-usb3-peri  # R-Car M3-W
+          - renesas,r8a77961-usb3-peri # R-Car M3-W+
           - renesas,r8a77965-usb3-peri # R-Car M3-N
           - renesas,r8a77990-usb3-peri # R-Car E3
       - const: renesas,rcar-gen3-usb3-peri
diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
index 469affa872d3..a7ae95598ccb 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -40,6 +40,7 @@ properties:
               - renesas,usbhs-r8a774c0 # RZ/G2E
               - renesas,usbhs-r8a7795  # R-Car H3
               - renesas,usbhs-r8a7796  # R-Car M3-W
+              - renesas,usbhs-r8a77961 # R-Car M3-W+
               - renesas,usbhs-r8a77965 # R-Car M3-N
               - renesas,usbhs-r8a77990 # R-Car E3
               - renesas,usbhs-r8a77995 # R-Car D3
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index 3f378951d624..dc025f126d71 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -16,7 +16,8 @@ Required properties:
     - "renesas,xhci-r8a7791" for r8a7791 SoC
     - "renesas,xhci-r8a7793" for r8a7793 SoC
     - "renesas,xhci-r8a7795" for r8a7795 SoC
-    - "renesas,xhci-r8a7796" for r8a7796 SoC
+    - "renesas,xhci-r8a7796" for r8a77960 SoC
+    - "renesas,xhci-r8a77961" for r8a77961 SoC
     - "renesas,xhci-r8a77965" for r8a77965 SoC
     - "renesas,xhci-r8a77990" for r8a77990 SoC
     - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig
index a208aca4ba7b..c591c958f1eb 100644
--- a/drivers/phy/tegra/Kconfig
+++ b/drivers/phy/tegra/Kconfig
@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config PHY_TEGRA_XUSB
 	tristate "NVIDIA Tegra XUSB pad controller driver"
-	depends on ARCH_TEGRA
+	depends on ARCH_TEGRA && USB_SUPPORT
+	select USB_COMMON
 	select USB_CONN_GPIO
 	select USB_PHY
 	help
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 84d6f7df09a4..ded8d93834ca 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -412,9 +412,12 @@ static void acm_ctrl_irq(struct urb *urb)
 
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if (retval && retval != -EPERM)
+	if (retval && retval != -EPERM && retval != -ENODEV)
 		dev_err(&acm->control->dev,
 			"%s - usb_submit_urb failed: %d\n", __func__, retval);
+	else
+		dev_vdbg(&acm->control->dev,
+			"control resubmission terminated %d\n", retval);
 }
 
 static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
@@ -430,6 +433,8 @@ static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
 			dev_err(&acm->data->dev,
 				"urb %d failed submission with %d\n",
 				index, res);
+		} else {
+			dev_vdbg(&acm->data->dev, "intended failure %d\n", res);
 		}
 		set_bit(index, &acm->read_urbs_free);
 		return res;
@@ -471,6 +476,7 @@ static void acm_read_bulk_callback(struct urb *urb)
 	int status = urb->status;
 	bool stopped = false;
 	bool stalled = false;
+	bool cooldown = false;
 
 	dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n",
 		rb->index, urb->actual_length, status);
@@ -497,6 +503,14 @@ static void acm_read_bulk_callback(struct urb *urb)
 			__func__, status);
 		stopped = true;
 		break;
+	case -EOVERFLOW:
+	case -EPROTO:
+		dev_dbg(&acm->data->dev,
+			"%s - cooling babbling device\n", __func__);
+		usb_mark_last_busy(acm->dev);
+		set_bit(rb->index, &acm->urbs_in_error_delay);
+		cooldown = true;
+		break;
 	default:
 		dev_dbg(&acm->data->dev,
 			"%s - nonzero urb status received: %d\n",
@@ -518,9 +532,11 @@ static void acm_read_bulk_callback(struct urb *urb)
 	 */
 	smp_mb__after_atomic();
 
-	if (stopped || stalled) {
+	if (stopped || stalled || cooldown) {
 		if (stalled)
 			schedule_work(&acm->work);
+		else if (cooldown)
+			schedule_delayed_work(&acm->dwork, HZ / 2);
 		return;
 	}
 
@@ -557,14 +573,20 @@ static void acm_softint(struct work_struct *work)
 	struct acm *acm = container_of(work, struct acm, work);
 
 	if (test_bit(EVENT_RX_STALL, &acm->flags)) {
-		if (!(usb_autopm_get_interface(acm->data))) {
+		smp_mb(); /* against acm_suspend() */
+		if (!acm->susp_count) {
 			for (i = 0; i < acm->rx_buflimit; i++)
 				usb_kill_urb(acm->read_urbs[i]);
 			usb_clear_halt(acm->dev, acm->in);
 			acm_submit_read_urbs(acm, GFP_KERNEL);
-			usb_autopm_put_interface(acm->data);
+			clear_bit(EVENT_RX_STALL, &acm->flags);
 		}
-		clear_bit(EVENT_RX_STALL, &acm->flags);
+	}
+
+	if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
+		for (i = 0; i < ACM_NR; i++) 
+			if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
+					acm_submit_read_urb(acm, i, GFP_NOIO);
 	}
 
 	if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
@@ -1333,6 +1355,7 @@ made_compressed_probe:
 	acm->readsize = readsize;
 	acm->rx_buflimit = num_rx_buf;
 	INIT_WORK(&acm->work, acm_softint);
+	INIT_DELAYED_WORK(&acm->dwork, acm_softint);
 	init_waitqueue_head(&acm->wioctl);
 	spin_lock_init(&acm->write_lock);
 	spin_lock_init(&acm->read_lock);
@@ -1542,6 +1565,7 @@ static void acm_disconnect(struct usb_interface *intf)
 
 	acm_kill_urbs(acm);
 	cancel_work_sync(&acm->work);
+	cancel_delayed_work_sync(&acm->dwork);
 
 	tty_unregister_device(acm_tty_driver, acm->minor);
 
@@ -1584,6 +1608,8 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
 
 	acm_kill_urbs(acm);
 	cancel_work_sync(&acm->work);
+	cancel_delayed_work_sync(&acm->dwork);
+	acm->urbs_in_error_delay = 0;
 
 	return 0;
 }
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index ca1c026382c2..cd5e9d8ab237 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -109,8 +109,11 @@ struct acm {
 #		define EVENT_TTY_WAKEUP	0
 #		define EVENT_RX_STALL	1
 #		define ACM_THROTTLED	2
+#		define ACM_ERROR_DELAY	3
+	unsigned long urbs_in_error_delay;		/* these need to be restarted after a delay */
 	struct usb_cdc_line_coding line;		/* bits, stop, parity */
-	struct work_struct work;			/* work queue entry for line discipline waking up */
+	struct work_struct work;			/* work queue entry for various purposes*/
+	struct delayed_work dwork;			/* for cool downs needed in error recovery */
 	unsigned int ctrlin;				/* input control lines (DCD, DSR, RI, break, overruns) */
 	unsigned int ctrlout;				/* output control lines (DTR, RTS) */
 	struct async_icount iocount;			/* counters for control line changes */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 54cd8ef795ec..2b6565c06c23 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1223,6 +1223,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 #ifdef CONFIG_PM
 			udev->reset_resume = 1;
 #endif
+			/* Don't set the change_bits when the device
+			 * was powered off.
+			 */
+			if (test_bit(port1, hub->power_bits))
+				set_bit(port1, hub->change_bits);
 
 		} else {
 			/* The power session is gone; tell hub_wq */
@@ -2723,13 +2728,11 @@ static bool use_new_scheme(struct usb_device *udev, int retry,
 {
 	int old_scheme_first_port =
 		port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME;
-	int quick_enumeration = (udev->speed == USB_SPEED_HIGH);
 
 	if (udev->speed >= USB_SPEED_SUPER)
 		return false;
 
-	return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first
-			      || quick_enumeration);
+	return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first);
 }
 
 /* Is a USB 3.0 port in the Inactive or Compliance Mode state?
@@ -3088,6 +3091,15 @@ static int check_port_resume_type(struct usb_device *udev,
 		if (portchange & USB_PORT_STAT_C_ENABLE)
 			usb_clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_ENABLE);
+
+		/*
+		 * Whatever made this reset-resume necessary may have
+		 * turned on the port1 bit in hub->change_bits.  But after
+		 * a successful reset-resume we want the bit to be clear;
+		 * if it was on it would indicate that something happened
+		 * following the reset-resume.
+		 */
+		clear_bit(port1, hub->change_bits);
 	}
 
 	return status;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index d5f834f16993..a48678a0c83a 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -589,12 +589,13 @@ void usb_sg_cancel(struct usb_sg_request *io)
 	int i, retval;
 
 	spin_lock_irqsave(&io->lock, flags);
-	if (io->status) {
+	if (io->status || io->count == 0) {
 		spin_unlock_irqrestore(&io->lock, flags);
 		return;
 	}
 	/* shut everything down */
 	io->status = -ECONNRESET;
+	io->count++;		/* Keep the request alive until we're done */
 	spin_unlock_irqrestore(&io->lock, flags);
 
 	for (i = io->entries - 1; i >= 0; --i) {
@@ -608,6 +609,12 @@ void usb_sg_cancel(struct usb_sg_request *io)
 			dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
 				 __func__, retval);
 	}
+
+	spin_lock_irqsave(&io->lock, flags);
+	io->count--;
+	if (!io->count)
+		complete(&io->complete);
+	spin_unlock_irqrestore(&io->lock, flags);
 }
 EXPORT_SYMBOL_GPL(usb_sg_cancel);
 
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index da30b5664ff3..3e8efe759c3e 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -430,6 +430,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Corsair K70 LUX */
 	{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
 
+	/* Corsair K70 RGB RAPDIFIRE */
+	{ USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT |
+	  USB_QUIRK_DELAY_CTRL_MSG },
+
 	/* MIDI keyboard WORLDE MINI */
 	{ USB_DEVICE(0x1c75, 0x0204), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 6846eb0cba13..4c171a8e215f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -307,10 +307,14 @@
 
 /* Global TX Fifo Size Register */
 #define DWC31_GTXFIFOSIZ_TXFRAMNUM	BIT(15)		/* DWC_usb31 only */
-#define DWC31_GTXFIFOSIZ_TXFDEF(n)	((n) & 0x7fff)	/* DWC_usb31 only */
-#define DWC3_GTXFIFOSIZ_TXFDEF(n)	((n) & 0xffff)
+#define DWC31_GTXFIFOSIZ_TXFDEP(n)	((n) & 0x7fff)	/* DWC_usb31 only */
+#define DWC3_GTXFIFOSIZ_TXFDEP(n)	((n) & 0xffff)
 #define DWC3_GTXFIFOSIZ_TXFSTADDR(n)	((n) & 0xffff0000)
 
+/* Global RX Fifo Size Register */
+#define DWC31_GRXFIFOSIZ_RXFDEP(n)	((n) & 0x7fff)	/* DWC_usb31 only */
+#define DWC3_GRXFIFOSIZ_RXFDEP(n)	((n) & 0xffff)
+
 /* Global Event Size Registers */
 #define DWC3_GEVNTSIZ_INTMASK		BIT(31)
 #define DWC3_GEVNTSIZ_SIZE(n)		((n) & 0xffff)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 4d3c79d90a6e..00746c2848c0 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1728,7 +1728,6 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 	u32			reg;
 
 	u8			link_state;
-	u8			speed;
 
 	/*
 	 * According to the Databook Remote wakeup request should
@@ -1738,16 +1737,13 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 	 */
 	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 
-	speed = reg & DWC3_DSTS_CONNECTSPD;
-	if ((speed == DWC3_DSTS_SUPERSPEED) ||
-	    (speed == DWC3_DSTS_SUPERSPEED_PLUS))
-		return 0;
-
 	link_state = DWC3_DSTS_USBLNKST(reg);
 
 	switch (link_state) {
+	case DWC3_LINK_STATE_RESET:
 	case DWC3_LINK_STATE_RX_DET:	/* in HS, means Early Suspend */
 	case DWC3_LINK_STATE_U3:	/* in HS, means SUSPEND */
+	case DWC3_LINK_STATE_RESUME:
 		break;
 	default:
 		return -EINVAL;
@@ -2227,7 +2223,6 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 {
 	struct dwc3 *dwc = dep->dwc;
 	int mdwidth;
-	int kbytes;
 	int size;
 
 	mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
@@ -2236,24 +2231,24 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 
 	size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1));
 	if (dwc3_is_usb31(dwc))
-		size = DWC31_GTXFIFOSIZ_TXFDEF(size);
+		size = DWC31_GTXFIFOSIZ_TXFDEP(size);
 	else
-		size = DWC3_GTXFIFOSIZ_TXFDEF(size);
+		size = DWC3_GTXFIFOSIZ_TXFDEP(size);
 
 	/* FIFO Depth is in MDWDITH bytes. Multiply */
 	size *= mdwidth;
 
-	kbytes = size / 1024;
-	if (kbytes == 0)
-		kbytes = 1;
-
 	/*
-	 * FIFO sizes account an extra MDWIDTH * (kbytes + 1) bytes for
-	 * internal overhead. We don't really know how these are used,
-	 * but documentation say it exists.
+	 * To meet performance requirement, a minimum TxFIFO size of 3x
+	 * MaxPacketSize is recommended for endpoints that support burst and a
+	 * minimum TxFIFO size of 2x MaxPacketSize for endpoints that don't
+	 * support burst. Use those numbers and we can calculate the max packet
+	 * limit as below.
 	 */
-	size -= mdwidth * (kbytes + 1);
-	size /= kbytes;
+	if (dwc->maximum_speed >= USB_SPEED_SUPER)
+		size /= 3;
+	else
+		size /= 2;
 
 	usb_ep_set_maxpacket_limit(&dep->endpoint, size);
 
@@ -2271,8 +2266,39 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep)
 {
 	struct dwc3 *dwc = dep->dwc;
+	int mdwidth;
+	int size;
+
+	mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
 
-	usb_ep_set_maxpacket_limit(&dep->endpoint, 1024);
+	/* MDWIDTH is represented in bits, convert to bytes */
+	mdwidth /= 8;
+
+	/* All OUT endpoints share a single RxFIFO space */
+	size = dwc3_readl(dwc->regs, DWC3_GRXFIFOSIZ(0));
+	if (dwc3_is_usb31(dwc))
+		size = DWC31_GRXFIFOSIZ_RXFDEP(size);
+	else
+		size = DWC3_GRXFIFOSIZ_RXFDEP(size);
+
+	/* FIFO depth is in MDWDITH bytes */
+	size *= mdwidth;
+
+	/*
+	 * To meet performance requirement, a minimum recommended RxFIFO size
+	 * is defined as follow:
+	 * RxFIFO size >= (3 x MaxPacketSize) +
+	 * (3 x 8 bytes setup packets size) + (16 bytes clock crossing margin)
+	 *
+	 * Then calculate the max packet limit as below.
+	 */
+	size -= (3 * 8) + 16;
+	if (size < 0)
+		size = 0;
+	else
+		size /= 3;
+
+	usb_ep_set_maxpacket_limit(&dep->endpoint, size);
 	dep->endpoint.max_streams = 15;
 	dep->endpoint.ops = &dwc3_gadget_ep_ops;
 	list_add_tail(&dep->endpoint.ep_list,
@@ -2484,14 +2510,7 @@ static int dwc3_gadget_ep_reclaim_trb_linear(struct dwc3_ep *dep,
 
 static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req)
 {
-	/*
-	 * For OUT direction, host may send less than the setup
-	 * length. Return true for all OUT requests.
-	 */
-	if (!req->direction)
-		return true;
-
-	return req->request.actual == req->request.length;
+	return req->num_pending_sgs == 0;
 }
 
 static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
@@ -2515,8 +2534,7 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
 
 	req->request.actual = req->request.length - req->remaining;
 
-	if (!dwc3_gadget_ep_request_completed(req) ||
-			req->num_pending_sgs) {
+	if (!dwc3_gadget_ep_request_completed(req)) {
 		__dwc3_gadget_kick_transfer(dep);
 		goto out;
 	}
diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index 971c6b92484a..171280c80228 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -728,19 +728,19 @@ static void xdbc_handle_tx_event(struct xdbc_trb *evt_trb)
 	case COMP_USB_TRANSACTION_ERROR:
 	case COMP_STALL_ERROR:
 	default:
-		if (ep_id == XDBC_EPID_OUT)
+		if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL)
 			xdbc.flags |= XDBC_FLAGS_OUT_STALL;
-		if (ep_id == XDBC_EPID_IN)
+		if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL)
 			xdbc.flags |= XDBC_FLAGS_IN_STALL;
 
 		xdbc_trace("endpoint %d stalled\n", ep_id);
 		break;
 	}
 
-	if (ep_id == XDBC_EPID_IN) {
+	if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL) {
 		xdbc.flags &= ~XDBC_FLAGS_IN_PROCESS;
 		xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
-	} else if (ep_id == XDBC_EPID_OUT) {
+	} else if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL) {
 		xdbc.flags &= ~XDBC_FLAGS_OUT_PROCESS;
 	} else {
 		xdbc_trace("invalid endpoint id %d\n", ep_id);
diff --git a/drivers/usb/early/xhci-dbc.h b/drivers/usb/early/xhci-dbc.h
index 673686eeddd7..6e2b7266a695 100644
--- a/drivers/usb/early/xhci-dbc.h
+++ b/drivers/usb/early/xhci-dbc.h
@@ -120,8 +120,22 @@ struct xdbc_ring {
 	u32			cycle_state;
 };
 
-#define XDBC_EPID_OUT		2
-#define XDBC_EPID_IN		3
+/*
+ * These are the "Endpoint ID" (also known as "Context Index") values for the
+ * OUT Transfer Ring and the IN Transfer Ring of a Debug Capability Context data
+ * structure.
+ * According to the "eXtensible Host Controller Interface for Universal Serial
+ * Bus (xHCI)" specification, section "7.6.3.2 Endpoint Contexts and Transfer
+ * Rings", these should be 0 and 1, and those are the values AMD machines give
+ * you; but Intel machines seem to use the formula from section "4.5.1 Device
+ * Context Index", which is supposed to be used for the Device Context only.
+ * Luckily the values from Intel don't overlap with those from AMD, so we can
+ * just test for both.
+ */
+#define XDBC_EPID_OUT		0
+#define XDBC_EPID_IN		1
+#define XDBC_EPID_OUT_INTEL	2
+#define XDBC_EPID_IN_INTEL	3
 
 struct xdbc_state {
 	u16			vendor;
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index c81023b195c3..10f01f974f67 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1813,6 +1813,10 @@ static void ffs_data_reset(struct ffs_data *ffs)
 	ffs->state = FFS_READ_DESCRIPTORS;
 	ffs->setup_state = FFS_NO_SETUP;
 	ffs->flags = 0;
+
+	ffs->ms_os_descs_ext_prop_count = 0;
+	ffs->ms_os_descs_ext_prop_name_len = 0;
+	ffs->ms_os_descs_ext_prop_data_len = 0;
 }
 
 
diff --git a/drivers/usb/gadget/legacy/raw_gadget.c b/drivers/usb/gadget/legacy/raw_gadget.c
index 76406343fbe5..ca7d95bf7397 100644
--- a/drivers/usb/gadget/legacy/raw_gadget.c
+++ b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -81,6 +81,7 @@ static int raw_event_queue_add(struct raw_event_queue *queue,
 static struct usb_raw_event *raw_event_queue_fetch(
 				struct raw_event_queue *queue)
 {
+	int ret;
 	unsigned long flags;
 	struct usb_raw_event *event;
 
@@ -89,11 +90,18 @@ static struct usb_raw_event *raw_event_queue_fetch(
 	 * there's at least one event queued by decrementing the semaphore,
 	 * and then take the lock to protect queue struct fields.
 	 */
-	if (down_interruptible(&queue->sema))
-		return NULL;
+	ret = down_interruptible(&queue->sema);
+	if (ret)
+		return ERR_PTR(ret);
 	spin_lock_irqsave(&queue->lock, flags);
-	if (WARN_ON(!queue->size))
-		return NULL;
+	/*
+	 * queue->size must have the same value as queue->sema counter (before
+	 * the down_interruptible() call above), so this check is a fail-safe.
+	 */
+	if (WARN_ON(!queue->size)) {
+		spin_unlock_irqrestore(&queue->lock, flags);
+		return ERR_PTR(-ENODEV);
+	}
 	event = queue->events[0];
 	queue->size--;
 	memmove(&queue->events[0], &queue->events[1],
@@ -392,9 +400,8 @@ static int raw_ioctl_init(struct raw_dev *dev, unsigned long value)
 	char *udc_device_name;
 	unsigned long flags;
 
-	ret = copy_from_user(&arg, (void __user *)value, sizeof(arg));
-	if (ret)
-		return ret;
+	if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
+		return -EFAULT;
 
 	switch (arg.speed) {
 	case USB_SPEED_UNKNOWN:
@@ -501,15 +508,13 @@ out_unlock:
 
 static int raw_ioctl_event_fetch(struct raw_dev *dev, unsigned long value)
 {
-	int ret = 0;
 	struct usb_raw_event arg;
 	unsigned long flags;
 	struct usb_raw_event *event;
 	uint32_t length;
 
-	ret = copy_from_user(&arg, (void __user *)value, sizeof(arg));
-	if (ret)
-		return ret;
+	if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
+		return -EFAULT;
 
 	spin_lock_irqsave(&dev->lock, flags);
 	if (dev->state != STATE_DEV_RUNNING) {
@@ -525,25 +530,31 @@ static int raw_ioctl_event_fetch(struct raw_dev *dev, unsigned long value)
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	event = raw_event_queue_fetch(&dev->queue);
-	if (!event) {
+	if (PTR_ERR(event) == -EINTR) {
 		dev_dbg(&dev->gadget->dev, "event fetching interrupted\n");
 		return -EINTR;
 	}
+	if (IS_ERR(event)) {
+		dev_err(&dev->gadget->dev, "failed to fetch event\n");
+		spin_lock_irqsave(&dev->lock, flags);
+		dev->state = STATE_DEV_FAILED;
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return -ENODEV;
+	}
 	length = min(arg.length, event->length);
-	ret = copy_to_user((void __user *)value, event,
-				sizeof(*event) + length);
-	return ret;
+	if (copy_to_user((void __user *)value, event, sizeof(*event) + length))
+		return -EFAULT;
+
+	return 0;
 }
 
 static void *raw_alloc_io_data(struct usb_raw_ep_io *io, void __user *ptr,
 				bool get_from_user)
 {
-	int ret;
 	void *data;
 
-	ret = copy_from_user(io, ptr, sizeof(*io));
-	if (ret)
-		return ERR_PTR(ret);
+	if (copy_from_user(io, ptr, sizeof(*io)))
+		return ERR_PTR(-EFAULT);
 	if (io->ep >= USB_RAW_MAX_ENDPOINTS)
 		return ERR_PTR(-EINVAL);
 	if (!usb_raw_io_flags_valid(io->flags))
@@ -658,12 +669,13 @@ static int raw_ioctl_ep0_read(struct raw_dev *dev, unsigned long value)
 	if (IS_ERR(data))
 		return PTR_ERR(data);
 	ret = raw_process_ep0_io(dev, &io, data, false);
-	if (ret < 0) {
-		kfree(data);
-		return ret;
-	}
+	if (ret)
+		goto free;
+
 	length = min(io.length, (unsigned int)ret);
-	ret = copy_to_user((void __user *)(value + sizeof(io)), data, length);
+	if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
+		ret = -EFAULT;
+free:
 	kfree(data);
 	return ret;
 }
@@ -952,12 +964,13 @@ static int raw_ioctl_ep_read(struct raw_dev *dev, unsigned long value)
 	if (IS_ERR(data))
 		return PTR_ERR(data);
 	ret = raw_process_ep_io(dev, &io, data, false);
-	if (ret < 0) {
-		kfree(data);
-		return ret;
-	}
+	if (ret)
+		goto free;
+
 	length = min(io.length, (unsigned int)ret);
-	ret = copy_to_user((void __user *)(value + sizeof(io)), data, length);
+	if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
+		ret = -EFAULT;
+free:
 	kfree(data);
 	return ret;
 }
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 6e0432141c40..22200341c8ec 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1951,10 +1951,10 @@ static irqreturn_t usba_vbus_irq_thread(int irq, void *devid)
 			usba_start(udc);
 		} else {
 			udc->suspended = false;
-			usba_stop(udc);
-
 			if (udc->driver->disconnect)
 				udc->driver->disconnect(&udc->gadget);
+
+			usba_stop(udc);
 		}
 		udc->vbus_prev = vbus;
 	}
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index a4d9b5e1e50e..d49c6dc1082d 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -540,7 +540,7 @@ static void bdc_req_complete(struct bdc_ep *ep, struct bdc_req *req,
 {
 	struct bdc *bdc = ep->bdc;
 
-	if (req == NULL  || &req->queue == NULL || &req->usb_req == NULL)
+	if (req == NULL)
 		return;
 
 	dev_dbg(bdc->dev, "%s ep:%s status:%d\n", __func__, ep->name, status);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 9eca1fe81061..f37316d2c8fa 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1571,6 +1571,8 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 		}
 		if ((temp & PORT_RC))
 			reset_change = true;
+		if (temp & PORT_OC)
+			status = 1;
 	}
 	if (!status && !reset_change) {
 		xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
@@ -1636,6 +1638,13 @@ retry:
 				 port_index);
 			goto retry;
 		}
+		/* bail out if port detected a over-current condition */
+		if (t1 & PORT_OC) {
+			bus_state->bus_suspended = 0;
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n");
+			return -EBUSY;
+		}
 		/* suspend ports in U0, or bail out for new connect changes */
 		if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
 			if ((t1 & PORT_CSC) && wake_enabled) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a78787bb5133..0fda0c0f4d31 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -547,6 +547,23 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 				stream_id);
 		return;
 	}
+	/*
+	 * A cancelled TD can complete with a stall if HW cached the trb.
+	 * In this case driver can't find cur_td, but if the ring is empty we
+	 * can move the dequeue pointer to the current enqueue position.
+	 */
+	if (!cur_td) {
+		if (list_empty(&ep_ring->td_list)) {
+			state->new_deq_seg = ep_ring->enq_seg;
+			state->new_deq_ptr = ep_ring->enqueue;
+			state->new_cycle_state = ep_ring->cycle_state;
+			goto done;
+		} else {
+			xhci_warn(xhci, "Can't find new dequeue state, missing cur_td\n");
+			return;
+		}
+	}
+
 	/* Dig out the cycle state saved by the xHC during the stop ep cmd */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 			"Finding endpoint context");
@@ -592,6 +609,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 	state->new_deq_seg = new_seg;
 	state->new_deq_ptr = new_deq;
 
+done:
 	/* Don't update the ring cycle state for the producer (us). */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 			"Cycle state = 0x%x", state->new_cycle_state);
@@ -1856,8 +1874,8 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
 
 	if (reset_type == EP_HARD_RESET) {
 		ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
-		xhci_cleanup_stalled_ring(xhci, ep_index, stream_id, td);
-		xhci_clear_hub_tt_buffer(xhci, td, ep);
+		xhci_cleanup_stalled_ring(xhci, slot_id, ep_index, stream_id,
+					  td);
 	}
 	xhci_ring_cmd_db(xhci);
 }
@@ -1978,11 +1996,18 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	if (trb_comp_code == COMP_STALL_ERROR ||
 		xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
 						trb_comp_code)) {
-		/* Issue a reset endpoint command to clear the host side
-		 * halt, followed by a set dequeue command to move the
-		 * dequeue pointer past the TD.
-		 * The class driver clears the device side halt later.
+		/*
+		 * xhci internal endpoint state will go to a "halt" state for
+		 * any stall, including default control pipe protocol stall.
+		 * To clear the host side halt we need to issue a reset endpoint
+		 * command, followed by a set dequeue command to move past the
+		 * TD.
+		 * Class drivers clear the device side halt from a functional
+		 * stall later. Hub TT buffer should only be cleared for FS/LS
+		 * devices behind HS hubs for functional stalls.
 		 */
+		if ((ep_index != 0) || (trb_comp_code != COMP_STALL_ERROR))
+			xhci_clear_hub_tt_buffer(xhci, td, ep);
 		xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
 					ep_ring->stream_id, td, EP_HARD_RESET);
 	} else {
@@ -2539,6 +2564,15 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				xhci_dbg(xhci, "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\n",
 					 slot_id, ep_index);
 			}
+			if (trb_comp_code == COMP_STALL_ERROR ||
+			    xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+							      trb_comp_code)) {
+				xhci_cleanup_halted_endpoint(xhci, slot_id,
+							     ep_index,
+							     ep_ring->stream_id,
+							     NULL,
+							     EP_HARD_RESET);
+			}
 			goto cleanup;
 		}
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index fe38275363e0..bee5deccc83d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3031,19 +3031,19 @@ static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
 			added_ctxs, added_ctxs);
 }
 
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
-			       unsigned int stream_id, struct xhci_td *td)
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+			       unsigned int ep_index, unsigned int stream_id,
+			       struct xhci_td *td)
 {
 	struct xhci_dequeue_state deq_state;
-	struct usb_device *udev = td->urb->dev;
 
 	xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
 			"Cleaning up stalled endpoint ring");
 	/* We need to move the HW's dequeue pointer past this TD,
 	 * or it will attempt to resend it on the next doorbell ring.
 	 */
-	xhci_find_new_dequeue_state(xhci, udev->slot_id,
-			ep_index, stream_id, td, &deq_state);
+	xhci_find_new_dequeue_state(xhci, slot_id, ep_index, stream_id, td,
+				    &deq_state);
 
 	if (!deq_state.new_deq_ptr || !deq_state.new_deq_seg)
 		return;
@@ -3054,7 +3054,7 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
 	if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
 				"Queueing new dequeue state");
-		xhci_queue_new_dequeue_state(xhci, udev->slot_id,
+		xhci_queue_new_dequeue_state(xhci, slot_id,
 				ep_index, &deq_state);
 	} else {
 		/* Better hope no one uses the input context between now and the
@@ -3065,7 +3065,7 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"Setting up input context for "
 				"configure endpoint command");
-		xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id,
+		xhci_setup_input_ctx_for_quirk(xhci, slot_id,
 				ep_index, &deq_state);
 	}
 }
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3289bb516201..86cfefdd6632 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2116,8 +2116,9 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
 		struct xhci_dequeue_state *deq_state);
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
-		unsigned int stream_id, struct xhci_td *td);
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+			       unsigned int ep_index, unsigned int stream_id,
+			       struct xhci_td *td);
 void xhci_stop_endpoint_command_watchdog(struct timer_list *t);
 void xhci_handle_command_timeout(struct work_struct *work);
 
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 2ab9600d0898..fc8a5da4a07c 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -1199,18 +1199,18 @@ static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
 /* High level: Gfx (indexed) register access */
 
 #ifdef CONFIG_USB_SISUSBVGA_CON
-int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data)
+int sisusb_setreg(struct sisusb_usb_data *sisusb, u32 port, u8 data)
 {
 	return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
 }
 
-int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data)
+int sisusb_getreg(struct sisusb_usb_data *sisusb, u32 port, u8 *data)
 {
 	return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
 }
 #endif
 
-int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxreg(struct sisusb_usb_data *sisusb, u32 port,
 		u8 index, u8 data)
 {
 	int ret;
@@ -1220,7 +1220,7 @@ int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
 	return ret;
 }
 
-int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
+int sisusb_getidxreg(struct sisusb_usb_data *sisusb, u32 port,
 		u8 index, u8 *data)
 {
 	int ret;
@@ -1230,7 +1230,7 @@ int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
 	return ret;
 }
 
-int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx,
+int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, u32 port, u8 idx,
 		u8 myand, u8 myor)
 {
 	int ret;
@@ -1245,7 +1245,7 @@ int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx,
 }
 
 static int sisusb_setidxregmask(struct sisusb_usb_data *sisusb,
-		int port, u8 idx, u8 data, u8 mask)
+		u32 port, u8 idx, u8 data, u8 mask)
 {
 	int ret;
 	u8 tmp;
@@ -1258,13 +1258,13 @@ static int sisusb_setidxregmask(struct sisusb_usb_data *sisusb,
 	return ret;
 }
 
-int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxregor(struct sisusb_usb_data *sisusb, u32 port,
 		u8 index, u8 myor)
 {
 	return sisusb_setidxregandor(sisusb, port, index, 0xff, myor);
 }
 
-int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxregand(struct sisusb_usb_data *sisusb, u32 port,
 		u8 idx, u8 myand)
 {
 	return sisusb_setidxregandor(sisusb, port, idx, myand, 0x00);
@@ -2785,8 +2785,8 @@ static loff_t sisusb_lseek(struct file *file, loff_t offset, int orig)
 static int sisusb_handle_command(struct sisusb_usb_data *sisusb,
 		struct sisusb_command *y, unsigned long arg)
 {
-	int	retval, port, length;
-	u32	address;
+	int	retval, length;
+	u32	port, address;
 
 	/* All our commands require the device
 	 * to be initialized.
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.h b/drivers/usb/misc/sisusbvga/sisusb_init.h
index 1782c759c4ad..ace09985dae4 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.h
@@ -812,17 +812,17 @@ static const struct SiS_VCLKData SiSUSB_VCLKData[] = {
 int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
 int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo);
 
-extern int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data);
-extern int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 * data);
-extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setreg(struct sisusb_usb_data *sisusb, u32 port, u8 data);
+extern int sisusb_getreg(struct sisusb_usb_data *sisusb, u32 port, u8 * data);
+extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, u32 port,
 			    u8 index, u8 data);
-extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, u32 port,
 			    u8 index, u8 * data);
-extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, u32 port,
 				 u8 idx, u8 myand, u8 myor);
-extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, u32 port,
 			      u8 index, u8 myor);
-extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, u32 port,
 			       u8 idx, u8 myand);
 
 void sisusb_delete(struct kref *kref);
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 3670fda02c34..d592071119ba 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -81,6 +81,19 @@ static void uas_free_streams(struct uas_dev_info *devinfo);
 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
 				int status);
 
+/*
+ * This driver needs its own workqueue, as we need to control memory allocation.
+ *
+ * In the course of error handling and power management uas_wait_for_pending_cmnds()
+ * needs to flush pending work items. In these contexts we cannot allocate memory
+ * by doing block IO as we would deadlock. For the same reason we cannot wait
+ * for anything allocating memory not heeding these constraints.
+ *
+ * So we have to control all work items that can be on the workqueue we flush.
+ * Hence we cannot share a queue and need our own.
+ */
+static struct workqueue_struct *workqueue;
+
 static void uas_do_work(struct work_struct *work)
 {
 	struct uas_dev_info *devinfo =
@@ -109,7 +122,7 @@ static void uas_do_work(struct work_struct *work)
 		if (!err)
 			cmdinfo->state &= ~IS_IN_WORK_LIST;
 		else
-			schedule_work(&devinfo->work);
+			queue_work(workqueue, &devinfo->work);
 	}
 out:
 	spin_unlock_irqrestore(&devinfo->lock, flags);
@@ -134,7 +147,7 @@ static void uas_add_work(struct uas_cmd_info *cmdinfo)
 
 	lockdep_assert_held(&devinfo->lock);
 	cmdinfo->state |= IS_IN_WORK_LIST;
-	schedule_work(&devinfo->work);
+	queue_work(workqueue, &devinfo->work);
 }
 
 static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
@@ -190,6 +203,9 @@ static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
 	struct uas_cmd_info *ci = (void *)&cmnd->SCp;
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 
+	if (status == -ENODEV) /* too late */
+		return;
+
 	scmd_printk(KERN_INFO, cmnd,
 		    "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
 		    prefix, status, cmdinfo->uas_tag,
@@ -1226,7 +1242,31 @@ static struct usb_driver uas_driver = {
 	.id_table = uas_usb_ids,
 };
 
-module_usb_driver(uas_driver);
+static int __init uas_init(void)
+{
+	int rv;
+
+	workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0);
+	if (!workqueue)
+		return -ENOMEM;
+
+	rv = usb_register(&uas_driver);
+	if (rv) {
+		destroy_workqueue(workqueue);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void __exit uas_exit(void)
+{
+	usb_deregister(&uas_driver);
+	destroy_workqueue(workqueue);
+}
+
+module_init(uas_init);
+module_exit(uas_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_IMPORT_NS(USB_STORAGE);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1880f3e13f57..f6c3681fa2e9 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2323,6 +2323,13 @@ UNUSUAL_DEV(  0x3340, 0xffff, 0x0000, 0x0000,
 		USB_SC_DEVICE,USB_PR_DEVICE,NULL,
 		US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Cyril Roelandt <tipecaml@gmail.com> */
+UNUSUAL_DEV(  0x357d, 0x7788, 0x0114, 0x0114,
+		"JMicron",
+		"USB to ATA/ATAPI Bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BROKEN_FUA ),
+
 /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
 UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
 		"iRiver",
diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c
index c823122f9cb7..e8ddb81cb6df 100644
--- a/drivers/usb/typec/bus.c
+++ b/drivers/usb/typec/bus.c
@@ -198,7 +198,10 @@ EXPORT_SYMBOL_GPL(typec_altmode_vdm);
 const struct typec_altmode *
 typec_altmode_get_partner(struct typec_altmode *adev)
 {
-	return adev ? &to_altmode(adev)->partner->adev : NULL;
+	if (!adev || !to_altmode(adev)->partner)
+		return NULL;
+
+	return &to_altmode(adev)->partner->adev;
 }
 EXPORT_SYMBOL_GPL(typec_altmode_get_partner);
 
diff --git a/drivers/usb/typec/mux/pi3usb30532.c b/drivers/usb/typec/mux/pi3usb30532.c
index 46457c133d2b..7afe275b17d0 100644
--- a/drivers/usb/typec/mux/pi3usb30532.c
+++ b/drivers/usb/typec/mux/pi3usb30532.c
@@ -114,8 +114,8 @@ pi3usb30532_mux_set(struct typec_mux *mux, struct typec_mux_state *state)
 static int pi3usb30532_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
-	struct typec_switch_desc sw_desc;
-	struct typec_mux_desc mux_desc;
+	struct typec_switch_desc sw_desc = { };
+	struct typec_mux_desc mux_desc = { };
 	struct pi3usb30532 *pi;
 	int ret;
 
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index de3576e6530a..82b19ebd7838 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -3794,6 +3794,14 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1,
 		 */
 		break;
 
+	case PORT_RESET:
+	case PORT_RESET_WAIT_OFF:
+		/*
+		 * State set back to default mode once the timer completes.
+		 * Ignore CC changes here.
+		 */
+		break;
+
 	default:
 		if (tcpm_port_is_disconnected(port))
 			tcpm_set_state(port, unattached_state(port), 0);
@@ -3855,6 +3863,15 @@ static void _tcpm_pd_vbus_on(struct tcpm_port *port)
 	case SRC_TRY_DEBOUNCE:
 		/* Do nothing, waiting for sink detection */
 		break;
+
+	case PORT_RESET:
+	case PORT_RESET_WAIT_OFF:
+		/*
+		 * State set back to default mode once the timer completes.
+		 * Ignore vbus changes here.
+		 */
+		break;
+
 	default:
 		break;
 	}
@@ -3908,10 +3925,19 @@ static void _tcpm_pd_vbus_off(struct tcpm_port *port)
 	case PORT_RESET_WAIT_OFF:
 		tcpm_set_state(port, tcpm_default_state(port), 0);
 		break;
+
 	case SRC_TRY_WAIT:
 	case SRC_TRY_DEBOUNCE:
 		/* Do nothing, waiting for sink detection */
 		break;
+
+	case PORT_RESET:
+		/*
+		 * State set back to default mode once the timer completes.
+		 * Ignore vbus changes here.
+		 */
+		break;
+
 	default:
 		if (port->pwr_role == TYPEC_SINK &&
 		    port->attached)