summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-10-25 12:11:02 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2011-10-25 12:11:02 +0200
commit59e52534172d845ebffb0d7e85fc56fb7b857051 (patch)
tree49552e03f1bdb413cd8b5f7542e91770688d7047
parent73692d9bb58ecc2fa73f4b2bfcf6eadaa6d49a26 (diff)
parent0d89e54c8249645404283436d952afc261a04e1e (diff)
downloadlinux-59e52534172d845ebffb0d7e85fc56fb7b857051.tar.bz2
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
-rw-r--r--Documentation/ABI/removed/o2cb2
-rw-r--r--Documentation/ABI/removed/raw13942
-rw-r--r--Documentation/ABI/testing/sysfs-bus-bcma8
-rw-r--r--Documentation/ABI/testing/sysfs-class-backlight-driver-adp887016
-rw-r--r--Documentation/PCI/pci.txt2
-rw-r--r--Documentation/blackfin/bfin-gpio-notes.txt2
-rw-r--r--Documentation/block/biodoc.txt2
-rw-r--r--Documentation/bus-virt-phys-mapping.txt2
-rw-r--r--Documentation/cdrom/packet-writing.txt2
-rw-r--r--Documentation/cpu-freq/governors.txt2
-rw-r--r--Documentation/development-process/4.Coding2
-rw-r--r--Documentation/devicetree/bindings/gpio/led.txt2
-rw-r--r--Documentation/filesystems/caching/object.txt6
-rw-r--r--Documentation/filesystems/locks.txt11
-rw-r--r--Documentation/filesystems/nfs/idmapper.txt2
-rw-r--r--Documentation/filesystems/pohmelfs/design_notes.txt5
-rw-r--r--Documentation/filesystems/proc.txt2
-rw-r--r--Documentation/filesystems/vfs.txt3
-rw-r--r--Documentation/frv/booting.txt6
-rw-r--r--Documentation/input/input.txt2
-rw-r--r--Documentation/kernel-docs.txt4
-rw-r--r--Documentation/kernel-parameters.txt12
-rw-r--r--Documentation/laptops/thinkpad-acpi.txt4
-rw-r--r--Documentation/media-framework.txt4
-rw-r--r--Documentation/memory-barriers.txt2
-rw-r--r--Documentation/networking/scaling.txt2
-rw-r--r--Documentation/power/basic-pm-debugging.txt2
-rw-r--r--Documentation/power/userland-swsusp.txt3
-rw-r--r--Documentation/rfkill.txt3
-rw-r--r--Documentation/scsi/aic7xxx_old.txt2
-rw-r--r--Documentation/scsi/scsi_mid_low_api.txt5
-rw-r--r--Documentation/security/keys-trusted-encrypted.txt3
-rw-r--r--Documentation/sound/oss/PAS163
-rw-r--r--Documentation/spi/pxa2xx4
-rw-r--r--Documentation/timers/highres.txt2
-rw-r--r--Documentation/usb/dma.txt6
-rw-r--r--Documentation/virtual/lguest/lguest.c2
-rw-r--r--Documentation/vm/numa4
-rw-r--r--Documentation/vm/slub.txt2
-rw-r--r--MAINTAINERS6
-rw-r--r--arch/alpha/kernel/srm_env.c5
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/include/asm/io.h2
-rw-r--r--arch/arm/mach-bcmring/Kconfig2
-rw-r--r--arch/arm/mach-bcmring/irq.c1
-rw-r--r--arch/arm/mach-bcmring/timer.c1
-rw-r--r--arch/arm/mach-nuc93x/time.c2
-rw-r--r--arch/arm/mach-omap2/smartreflex.c2
-rw-r--r--arch/arm/mach-pxa/xcep.c3
-rw-r--r--arch/arm/mach-w90x900/cpu.c2
-rw-r--r--arch/arm/plat-mxc/Kconfig2
-rw-r--r--arch/cris/Kconfig4
-rw-r--r--arch/cris/arch-v10/Kconfig12
-rw-r--r--arch/cris/arch-v32/lib/nand_init.S178
-rw-r--r--arch/h8300/Kconfig2
-rw-r--r--arch/ia64/hp/common/sba_iommu.c12
-rw-r--r--arch/m68k/q40/README2
-rw-r--r--arch/microblaze/include/asm/dma-mapping.h2
-rw-r--r--arch/microblaze/mm/init.c6
-rw-r--r--arch/mips/include/asm/lasat/lasat.h6
-rw-r--r--arch/mn10300/Kconfig2
-rw-r--r--arch/mn10300/kernel/irq.c1
-rw-r--r--arch/openrisc/Kconfig2
-rw-r--r--arch/openrisc/include/asm/dma-mapping.h2
-rw-r--r--arch/parisc/Kconfig4
-rw-r--r--arch/parisc/include/asm/dma-mapping.h2
-rw-r--r--arch/parisc/kernel/pci-dma.c2
-rw-r--r--arch/powerpc/include/asm/qe.h2
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig2
-rw-r--r--arch/powerpc/platforms/embedded6xx/storcenter.c2
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe.c2
-rw-r--r--arch/s390/hypfs/hypfs_diag.c3
-rw-r--r--arch/unicore32/include/asm/io.h2
-rw-r--r--arch/x86/Kconfig2
-rw-r--r--arch/x86/Kconfig.debug2
-rw-r--r--arch/x86/boot/header.S2
-rw-r--r--arch/x86/include/asm/dma-mapping.h2
-rw-r--r--arch/x86/kernel/amd_gart_64.c2
-rw-r--r--arch/x86/kernel/apm_32.c2
-rw-r--r--arch/x86/kernel/pci-dma.c4
-rw-r--r--arch/x86/kernel/process_32.c2
-rw-r--r--arch/x86/mm/mmio-mod.c1
-rw-r--r--drivers/atm/idt77252.c11
-rw-r--r--drivers/atm/lanai.c3
-rw-r--r--drivers/block/drbd/drbd_bitmap.c5
-rw-r--r--drivers/block/drbd/drbd_int.h3
-rw-r--r--drivers/block/drbd/drbd_nl.c4
-rw-r--r--drivers/block/rbd.c2
-rw-r--r--drivers/block/xen-blkback/common.h1
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c4
-rw-r--r--drivers/char/agp/backend.c3
-rw-r--r--drivers/char/apm-emulation.c5
-rw-r--r--drivers/char/raw.c3
-rw-r--r--drivers/char/rtc.c7
-rw-r--r--drivers/cpufreq/cpufreq_ondemand.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_fence.c2
-rw-r--r--drivers/i2c/busses/i2c-designware.c2
-rw-r--r--drivers/ide/Kconfig2
-rw-r--r--drivers/input/misc/rotary_encoder.c2
-rw-r--r--drivers/isdn/i4l/isdn_common.c4
-rw-r--r--drivers/isdn/mISDN/dsp_core.c3
-rw-r--r--drivers/isdn/mISDN/l1oip_codec.c6
-rw-r--r--drivers/leds/Kconfig2
-rw-r--r--drivers/media/dvb/dvb-usb/af9005-remote.c2
-rw-r--r--drivers/media/dvb/dvb-usb/af9005.c2
-rw-r--r--drivers/media/dvb/frontends/dib3000.h2
-rw-r--r--drivers/media/dvb/frontends/dib3000mb.c2
-rw-r--r--drivers/media/radio/wl128x/fmdrv_v4l2.c2
-rw-r--r--drivers/media/video/cx18/cx18-mailbox.h2
-rw-r--r--drivers/mtd/Kconfig2
-rw-r--r--drivers/net/Kconfig3
-rw-r--r--drivers/net/arm/ks8695net.c2
-rw-r--r--drivers/net/atlx/atl1.c2
-rw-r--r--drivers/net/bnx2.h12
-rw-r--r--drivers/net/can/sja1000/sja1000_of_platform.c2
-rw-r--r--drivers/net/igb/e1000_mbx.c2
-rw-r--r--drivers/net/igbvf/mbx.c2
-rw-r--r--drivers/net/irda/Kconfig2
-rw-r--r--drivers/net/ixgbe/ixgbe_mbx.c2
-rw-r--r--drivers/net/ixgbevf/mbx.c2
-rw-r--r--drivers/net/phy/broadcom.c2
-rw-r--r--drivers/net/sky2.c2
-rw-r--r--drivers/net/tile/tilepro.c2
-rw-r--r--drivers/net/tulip/21142.c3
-rw-r--r--drivers/net/tulip/eeprom.c2
-rw-r--r--drivers/net/tulip/interrupt.c3
-rw-r--r--drivers/net/tulip/media.c3
-rw-r--r--drivers/net/tulip/pnic.c3
-rw-r--r--drivers/net/tulip/pnic2.c3
-rw-r--r--drivers/net/tulip/timer.c3
-rw-r--r--drivers/net/tulip/tulip.h3
-rw-r--r--drivers/net/tulip/tulip_core.c3
-rw-r--r--drivers/net/wireless/ipw2x00/libipw_tx.c2
-rw-r--r--drivers/net/wireless/libertas_tf/deb_defs.h2
-rw-r--r--drivers/net/wireless/rtlwifi/pci.c6
-rw-r--r--drivers/parisc/sba_iommu.c16
-rw-r--r--drivers/platform/x86/Kconfig5
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c2
-rw-r--r--drivers/s390/cio/blacklist.c3
-rw-r--r--drivers/scsi/aacraid/src.c1
-rw-r--r--drivers/scsi/aic7xxx/Kconfig.aic79xx3
-rw-r--r--drivers/scsi/aic7xxx/Kconfig.aic7xxx3
-rw-r--r--drivers/scsi/aic94xx/aic94xx_dump.c2
-rw-r--r--drivers/scsi/bfa/bfad_drv.h1
-rw-r--r--drivers/scsi/cxgbi/cxgb3i/cxgb3i.c1
-rw-r--r--drivers/scsi/cxgbi/cxgb4i/cxgb4i.c1
-rw-r--r--drivers/scsi/fcoe/fcoe.c1
-rw-r--r--drivers/scsi/isci/phy.c2
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.c2
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.c1
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_config.c1
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_ctl.c1
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_scsih.c1
-rw-r--r--drivers/scsi/mvsas/mv_sas.h1
-rw-r--r--drivers/scsi/pmcraid.c1
-rw-r--r--drivers/scsi/pmcraid.h1
-rw-r--r--drivers/scsi/sg.c18
-rw-r--r--drivers/staging/cxt1e1/Kconfig3
-rw-r--r--drivers/staging/iio/addac/adt7316-i2c.c2
-rw-r--r--drivers/staging/iio/dds/ad9832.c2
-rw-r--r--drivers/target/iscsi/iscsi_target_nego.c2
-rw-r--r--drivers/target/target_core_tpg.c2
-rw-r--r--drivers/tty/Kconfig2
-rw-r--r--drivers/tty/serial/mrst_max3110.c2
-rw-r--r--drivers/usb/gadget/langwell_udc.c2
-rw-r--r--drivers/usb/gadget/mv_udc_core.c4
-rw-r--r--drivers/usb/gadget/net2280.c2
-rw-r--r--drivers/usb/gadget/uvc.h1
-rw-r--r--drivers/usb/gadget/uvc_v4l2.c1
-rw-r--r--drivers/usb/musb/musb_gadget.c2
-rw-r--r--drivers/usb/serial/digi_acceleport.c2
-rw-r--r--drivers/usb/serial/mos7720.c1
-rw-r--r--drivers/usb/serial/mos7840.c1
-rw-r--r--drivers/usb/storage/realtek_cr.c1
-rw-r--r--drivers/uwb/uwb-internal.h1
-rw-r--r--drivers/video/igafb.c2
-rw-r--r--drivers/watchdog/smsc37b787_wdt.c2
-rw-r--r--fs/cifs/connect.c2
-rw-r--r--fs/coda/coda_linux.h5
-rw-r--r--fs/configfs/inode.c3
-rw-r--r--fs/configfs/item.c2
-rw-r--r--fs/eventpoll.c2
-rw-r--r--fs/locks.c2
-rw-r--r--fs/reiserfs/journal.c9
-rw-r--r--fs/reiserfs/resize.c4
-rw-r--r--fs/squashfs/Kconfig6
-rw-r--r--fs/xfs/kmem.h7
-rw-r--r--include/linux/ceph/messenger.h1
-rw-r--r--include/linux/drbd_tag_magic.h2
-rw-r--r--include/linux/io-mapping.h2
-rw-r--r--include/linux/isdn.h2
-rw-r--r--include/linux/platform_data/ntc_thermistor.h2
-rw-r--r--include/media/pwc-ioctl.h1
-rw-r--r--include/media/videobuf-dma-sg.h2
-rw-r--r--include/target/configfs_macros.h4
-rw-r--r--kernel/async.c4
-rw-r--r--kernel/futex.c10
-rw-r--r--kernel/sched.c2
-rw-r--r--lib/Kconfig.debug40
-rw-r--r--lib/dynamic_debug.c1
-rw-r--r--lib/idr.c2
-rw-r--r--mm/page_cgroup.c3
-rw-r--r--mm/vmscan.c2
-rw-r--r--net/netfilter/Kconfig2
-rw-r--r--net/netfilter/x_tables.c5
-rw-r--r--net/rds/ib_cm.c6
-rwxr-xr-xscripts/checkpatch.pl4
-rw-r--r--sound/core/memalloc.c4
-rw-r--r--sound/oss/Kconfig4
-rw-r--r--sound/soc/davinci/Kconfig1
-rw-r--r--tools/perf/util/config.c4
211 files changed, 293 insertions, 578 deletions
diff --git a/Documentation/ABI/removed/o2cb b/Documentation/ABI/removed/o2cb
index 7f5daa465093..20c91adca6d4 100644
--- a/Documentation/ABI/removed/o2cb
+++ b/Documentation/ABI/removed/o2cb
@@ -1,6 +1,6 @@
What: /sys/o2cb symlink
Date: May 2011
-KernelVersion: 2.6.40
+KernelVersion: 3.0
Contact: ocfs2-devel@oss.oracle.com
Description: This is a symlink: /sys/o2cb to /sys/fs/o2cb. The symlink is
removed when new versions of ocfs2-tools which know to look
diff --git a/Documentation/ABI/removed/raw1394 b/Documentation/ABI/removed/raw1394
index 490aa1efc4ae..ec333e676322 100644
--- a/Documentation/ABI/removed/raw1394
+++ b/Documentation/ABI/removed/raw1394
@@ -5,7 +5,7 @@ Description:
/dev/raw1394 was a character device file that allowed low-level
access to FireWire buses. Its major drawbacks were its inability
to implement sensible device security policies, and its low level
- of abstraction that required userspace clients do duplicate much
+ of abstraction that required userspace clients to duplicate much
of the kernel's ieee1394 core functionality.
Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
firewire-core.
diff --git a/Documentation/ABI/testing/sysfs-bus-bcma b/Documentation/ABI/testing/sysfs-bus-bcma
index 06b62badddd1..721b4aea3020 100644
--- a/Documentation/ABI/testing/sysfs-bus-bcma
+++ b/Documentation/ABI/testing/sysfs-bus-bcma
@@ -1,6 +1,6 @@
What: /sys/bus/bcma/devices/.../manuf
Date: May 2011
-KernelVersion: 2.6.40
+KernelVersion: 3.0
Contact: Rafał Miłecki <zajec5@gmail.com>
Description:
Each BCMA core has it's manufacturer id. See
@@ -8,7 +8,7 @@ Description:
What: /sys/bus/bcma/devices/.../id
Date: May 2011
-KernelVersion: 2.6.40
+KernelVersion: 3.0
Contact: Rafał Miłecki <zajec5@gmail.com>
Description:
There are a few types of BCMA cores, they can be identified by
@@ -16,7 +16,7 @@ Description:
What: /sys/bus/bcma/devices/.../rev
Date: May 2011
-KernelVersion: 2.6.40
+KernelVersion: 3.0
Contact: Rafał Miłecki <zajec5@gmail.com>
Description:
BCMA cores of the same type can still slightly differ depending
@@ -24,7 +24,7 @@ Description:
What: /sys/bus/bcma/devices/.../class
Date: May 2011
-KernelVersion: 2.6.40
+KernelVersion: 3.0
Contact: Rafał Miłecki <zajec5@gmail.com>
Description:
Each BCMA core is identified by few fields, including class it
diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
index aa11dbdd794b..4a9c545bda4b 100644
--- a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
+++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
@@ -4,8 +4,8 @@ What: /sys/class/backlight/<backlight>/l2_bright_max
What: /sys/class/backlight/<backlight>/l3_office_max
What: /sys/class/backlight/<backlight>/l4_indoor_max
What: /sys/class/backlight/<backlight>/l5_dark_max
-Date: Mai 2011
-KernelVersion: 2.6.40
+Date: May 2011
+KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Control the maximum brightness for <ambient light zone>
@@ -18,8 +18,8 @@ What: /sys/class/backlight/<backlight>/l2_bright_dim
What: /sys/class/backlight/<backlight>/l3_office_dim
What: /sys/class/backlight/<backlight>/l4_indoor_dim
What: /sys/class/backlight/<backlight>/l5_dark_dim
-Date: Mai 2011
-KernelVersion: 2.6.40
+Date: May 2011
+KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Control the dim brightness for <ambient light zone>
@@ -29,8 +29,8 @@ Description:
this <ambient light zone>.
What: /sys/class/backlight/<backlight>/ambient_light_level
-Date: Mai 2011
-KernelVersion: 2.6.40
+Date: May 2011
+KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Get conversion value of the light sensor.
@@ -39,8 +39,8 @@ Description:
8000 (max ambient brightness)
What: /sys/class/backlight/<backlight>/ambient_light_zone
-Date: Mai 2011
-KernelVersion: 2.6.40
+Date: May 2011
+KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Get/Set current ambient light zone. Reading returns
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
index 6148d4080f88..aa09e5476bba 100644
--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@@ -314,7 +314,7 @@ from the PCI device config space. Use the values in the pci_dev structure
as the PCI "bus address" might have been remapped to a "host physical"
address by the arch/chip-set specific kernel support.
-See Documentation/IO-mapping.txt for how to access device registers
+See Documentation/io-mapping.txt for how to access device registers
or device memory.
The device driver needs to call pci_request_region() to verify
diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt
index f731c1e56475..d36b01f778b9 100644
--- a/Documentation/blackfin/bfin-gpio-notes.txt
+++ b/Documentation/blackfin/bfin-gpio-notes.txt
@@ -1,5 +1,5 @@
/*
- * File: Documentation/blackfin/bfin-gpio-note.txt
+ * File: Documentation/blackfin/bfin-gpio-notes.txt
* Based on:
* Author:
*
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index c6d84cfd2f56..e418dc0a7086 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
do not have a corresponding kernel virtual address space mapping) and
low-memory pages.
-Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
+Note: Please refer to Documentation/DMA-API-HOWTO.txt for a discussion
on PCI high mem DMA aspects and mapping of scatter gather lists, and support
for 64 bit PCI.
diff --git a/Documentation/bus-virt-phys-mapping.txt b/Documentation/bus-virt-phys-mapping.txt
index 1b5aa10df845..2bc55ff3b4d1 100644
--- a/Documentation/bus-virt-phys-mapping.txt
+++ b/Documentation/bus-virt-phys-mapping.txt
@@ -1,6 +1,6 @@
[ NOTE: The virt_to_bus() and bus_to_virt() functions have been
superseded by the functionality provided by the PCI DMA interface
- (see Documentation/PCI/PCI-DMA-mapping.txt). They continue
+ (see Documentation/DMA-API-HOWTO.txt). They continue
to be documented below for historical purposes, but new code
must not use them. --davidm 00/12/12 ]
diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt
index 13c251d5add6..2834170d821e 100644
--- a/Documentation/cdrom/packet-writing.txt
+++ b/Documentation/cdrom/packet-writing.txt
@@ -109,7 +109,7 @@ this interface. (see http://tom.ist-im-web.de/download/pktcdvd )
For a description of the sysfs interface look into the file:
- Documentation/ABI/testing/sysfs-block-pktcdvd
+ Documentation/ABI/testing/sysfs-class-pktcdvd
Using the pktcdvd debugfs interface
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index e74d0a2eb1cf..d221781dabaa 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -132,7 +132,7 @@ The sampling rate is limited by the HW transition latency:
transition_latency * 100
Or by kernel restrictions:
If CONFIG_NO_HZ is set, the limit is 10ms fixed.
-If CONFIG_NO_HZ is not set or no_hz=off boot parameter is used, the
+If CONFIG_NO_HZ is not set or nohz=off boot parameter is used, the
limits depend on the CONFIG_HZ option:
HZ=1000: min=20000us (20ms)
HZ=250: min=80000us (80ms)
diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding
index 83f5f5b365a3..e3cb6a56653a 100644
--- a/Documentation/development-process/4.Coding
+++ b/Documentation/development-process/4.Coding
@@ -278,7 +278,7 @@ enabled, a configurable percentage of memory allocations will be made to
fail; these failures can be restricted to a specific range of code.
Running with fault injection enabled allows the programmer to see how the
code responds when things go badly. See
-Documentation/fault-injection/fault-injection.text for more information on
+Documentation/fault-injection/fault-injection.txt for more information on
how to use this facility.
Other kinds of errors can be found with the "sparse" static analysis tool.
diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt
index 064db928c3c1..141087cf3107 100644
--- a/Documentation/devicetree/bindings/gpio/led.txt
+++ b/Documentation/devicetree/bindings/gpio/led.txt
@@ -8,7 +8,7 @@ node's name represents the name of the corresponding LED.
LED sub-node properties:
- gpios : Should specify the LED's GPIO, see "Specifying GPIO information
- for devices" in Documentation/powerpc/booting-without-of.txt. Active
+ for devices" in Documentation/devicetree/booting-without-of.txt. Active
low LEDs should be indicated using flags in the GPIO specifier.
- label : (optional) The label for this LED. If omitted, the label is
taken from the node name (excluding the unit address).
diff --git a/Documentation/filesystems/caching/object.txt b/Documentation/filesystems/caching/object.txt
index e8b0a35d8fe5..58313348da87 100644
--- a/Documentation/filesystems/caching/object.txt
+++ b/Documentation/filesystems/caching/object.txt
@@ -127,9 +127,9 @@ fscache_enqueue_object()).
PROVISION OF CPU TIME
---------------------
-The work to be done by the various states is given CPU time by the threads of
-the slow work facility (see Documentation/slow-work.txt). This is used in
-preference to the workqueue facility because:
+The work to be done by the various states was given CPU time by the threads of
+the slow work facility. This was used in preference to the workqueue facility
+because:
(1) Threads may be completely occupied for very long periods of time by a
particular work item. These state actions may be doing sequences of
diff --git a/Documentation/filesystems/locks.txt b/Documentation/filesystems/locks.txt
index fab857accbd6..2cf81082581d 100644
--- a/Documentation/filesystems/locks.txt
+++ b/Documentation/filesystems/locks.txt
@@ -53,11 +53,12 @@ fcntl(), with all the problems that implies.
1.3 Mandatory Locking As A Mount Option
---------------------------------------
-Mandatory locking, as described in 'Documentation/filesystems/mandatory.txt'
-was prior to this release a general configuration option that was valid for
-all mounted filesystems. This had a number of inherent dangers, not the
-least of which was the ability to freeze an NFS server by asking it to read
-a file for which a mandatory lock existed.
+Mandatory locking, as described in
+'Documentation/filesystems/mandatory-locking.txt' was prior to this release a
+general configuration option that was valid for all mounted filesystems. This
+had a number of inherent dangers, not the least of which was the ability to
+freeze an NFS server by asking it to read a file for which a mandatory lock
+existed.
From this release of the kernel, mandatory locking can be turned on and off
on a per-filesystem basis, using the mount options 'mand' and 'nomand'.
diff --git a/Documentation/filesystems/nfs/idmapper.txt b/Documentation/filesystems/nfs/idmapper.txt
index 9c8fd6148656..120fd3cf7fd9 100644
--- a/Documentation/filesystems/nfs/idmapper.txt
+++ b/Documentation/filesystems/nfs/idmapper.txt
@@ -47,7 +47,7 @@ request-key will find the first matching line and corresponding program. In
this case, /some/other/program will handle all uid lookups and
/usr/sbin/nfs.idmap will handle gid, user, and group lookups.
-See <file:Documentation/security/keys-request-keys.txt> for more information
+See <file:Documentation/security/keys-request-key.txt> for more information
about the request-key function.
diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt
index dcf833587162..8aef91335701 100644
--- a/Documentation/filesystems/pohmelfs/design_notes.txt
+++ b/Documentation/filesystems/pohmelfs/design_notes.txt
@@ -58,8 +58,9 @@ data transfers.
POHMELFS clients operate with a working set of servers and are capable of balancing read-only
operations (like lookups or directory listings) between them according to IO priorities.
Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
-with write permission turned on. IO priority and permissions can be changed in run-time.
+in Documentation/filesystems/pohmelfs/info.txt file). Writes are replicated to all servers, which
+are connected with write permission turned on. IO priority and permissions can be changed in
+run-time.
POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
One can select any kernel supported cipher, encryption mode, hash type and operation mode
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index db3b1aba32a3..0ec91f03422e 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1263,7 +1263,7 @@ review the kernel documentation in the directory /usr/src/linux/Documentation.
This chapter is heavily based on the documentation included in the pre 2.2
kernels, and became part of it in version 2.2.1 of the Linux kernel.
-Please see: Documentation/sysctls/ directory for descriptions of these
+Please see: Documentation/sysctl/ directory for descriptions of these
entries.
------------------------------------------------------------------------------
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 52d8fb81cfff..43cbd0821721 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -1053,9 +1053,6 @@ manipulate dentries:
and the dentry is returned. The caller must use dput()
to free the dentry when it finishes using it.
-For further information on dentry locking, please refer to the document
-Documentation/filesystems/dentry-locking.txt.
-
Mount Options
=============
diff --git a/Documentation/frv/booting.txt b/Documentation/frv/booting.txt
index 37c4d84a0e57..9bdf4b46e741 100644
--- a/Documentation/frv/booting.txt
+++ b/Documentation/frv/booting.txt
@@ -180,9 +180,3 @@ separated by spaces:
This tells the kernel what program to run initially. By default this is
/sbin/init, but /sbin/sash or /bin/sh are common alternatives.
-
- (*) vdc=...
-
- This option configures the MB93493 companion chip visual display
- driver. Please see Documentation/frv/mb93493/vdc.txt for more
- information.
diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt
index b93c08442e3c..b3d6787b4fb1 100644
--- a/Documentation/input/input.txt
+++ b/Documentation/input/input.txt
@@ -111,7 +111,7 @@ LCDs and many other purposes.
The monitor and speaker controls should be easy to add to the hid/input
interface, but for the UPSs and LCDs it doesn't make much sense. For this,
-the hiddev interface was designed. See Documentation/usb/hiddev.txt
+the hiddev interface was designed. See Documentation/hid/hiddev.txt
for more information about it.
The usage of the usbhid module is very simple, it takes no parameters,
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index 0e0734b509d8..eda1eb1451a0 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -300,7 +300,7 @@
* Title: "The Kernel Hacking HOWTO"
Author: Various Talented People, and Rusty.
- Location: in kernel tree, Documentation/DocBook/kernel-hacking/
+ Location: in kernel tree, Documentation/DocBook/kernel-hacking.tmpl
(must be built as "make {htmldocs | psdocs | pdfdocs})
Keywords: HOWTO, kernel contexts, deadlock, locking, modules,
symbols, return conventions.
@@ -351,7 +351,7 @@
* Title: "Linux Kernel Locking HOWTO"
Author: Various Talented People, and Rusty.
- Location: in kernel tree, Documentation/DocBook/kernel-locking/
+ Location: in kernel tree, Documentation/DocBook/kernel-locking.tmpl
(must be built as "make {htmldocs | psdocs | pdfdocs})
Keywords: locks, locking, spinlock, semaphore, atomic, race
condition, bottom halves, tasklets, softirqs.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d317f6cf0d35..0e6a1290f04b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -164,7 +164,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
rsdt -- prefer RSDT over (default) XSDT
copy_dsdt -- copy DSDT to memory
- See also Documentation/power/pm.txt, pci=noacpi
+ See also Documentation/power/runtime_pm.txt, pci=noacpi
acpi_rsdp= [ACPI,EFI,KEXEC]
Pass the RSDP address to the kernel, mostly used
@@ -320,7 +320,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
amijoy.map= [HW,JOY] Amiga joystick support
Map of devices attached to JOY0DAT and JOY1DAT
Format: <a>,<b>
- See also Documentation/kernel/input/joystick.txt
+ See also Documentation/input/joystick.txt
analog.map= [HW,JOY] Analog joystick and gamepad support
Specifies type or capabilities of an analog joystick
@@ -409,7 +409,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
bttv.radio= Most important insmod options are available as
kernel args too.
bttv.pll= See Documentation/video4linux/bttv/Insmod-options
- bttv.tuner= and Documentation/video4linux/bttv/CARDLIST
+ bttv.tuner=
bulk_remove=off [PPC] This parameter disables the use of the pSeries
firmware feature for flushing multiple hpte entries
@@ -725,7 +725,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
elevator= [IOSCHED]
Format: {"cfq" | "deadline" | "noop"}
- See Documentation/block/as-iosched.txt and
+ See Documentation/block/cfq-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
elfcorehdr= [IA-64,PPC,SH,X86]
@@ -771,7 +771,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
fail_make_request=[KNL]
General fault injection mechanism.
Format: <interval>,<probability>,<space>,<times>
- See also /Documentation/fault-injection/.
+ See also Documentation/fault-injection/.
floppy= [HW]
See Documentation/blockdev/floppy.txt.
@@ -2381,7 +2381,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Format: <integer>
sonypi.*= [HW] Sony Programmable I/O Control Device driver
- See Documentation/sonypi.txt
+ See Documentation/laptops/sonypi.txt
specialix= [HW,SERIAL] Specialix multi-serial port adapter
See Documentation/serial/specialix.txt.
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 61815483efa3..3ff0dad62d36 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -736,7 +736,7 @@ status as "unknown". The available commands are:
sysfs notes:
The ThinkLight sysfs interface is documented by the LED class
-documentation, in Documentation/leds-class.txt. The ThinkLight LED name
+documentation, in Documentation/leds/leds-class.txt. The ThinkLight LED name
is "tpacpi::thinklight".
Due to limitations in the sysfs LED class, if the status of the ThinkLight
@@ -833,7 +833,7 @@ All of the above can be turned on and off and can be made to blink.
sysfs notes:
The ThinkPad LED sysfs interface is described in detail by the LED class
-documentation, in Documentation/leds-class.txt.
+documentation, in Documentation/leds/leds-class.txt.
The LEDs are named (in LED ID order, from 0 to 12):
"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt
index 669b5fb03a86..3a0f879533ce 100644
--- a/Documentation/media-framework.txt
+++ b/Documentation/media-framework.txt
@@ -9,8 +9,8 @@ Introduction
------------
The media controller API is documented in DocBook format in
-Documentation/DocBook/v4l/media-controller.xml. This document will focus on
-the kernel-side implementation of the media framework.
+Documentation/DocBook/media/v4l/media-controller.xml. This document will focus
+on the kernel-side implementation of the media framework.
Abstract media device model
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index f0d3a8026a56..2759f7c188f0 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -438,7 +438,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee:
[*] For information on bus mastering DMA and coherency please read:
Documentation/PCI/pci.txt
- Documentation/PCI/PCI-DMA-mapping.txt
+ Documentation/DMA-API-HOWTO.txt
Documentation/DMA-API.txt
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index fe67b5c79f0f..a177de21d28e 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -73,7 +73,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default,
an IRQ may be handled on any CPU. Because a non-negligible part of packet
processing takes place in receive interrupt handling, it is advantageous
to spread receive interrupts between CPUs. To manually adjust the IRQ
-affinity of each interrupt see Documentation/IRQ-affinity. Some systems
+affinity of each interrupt see Documentation/IRQ-affinity.txt. Some systems
will be running irqbalance, a daemon that dynamically optimizes IRQ
assignments and as a result may override any manual settings.
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
index ddd78172ef73..05a7fe76232d 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -173,7 +173,7 @@ kernel messages using the serial console. This may provide you with some
information about the reasons of the suspend (resume) failure. Alternatively,
it may be possible to use a FireWire port for debugging with firescope
(ftp://ftp.firstfloor.org/pub/ak/firescope/). On x86 it is also possible to
-use the PM_TRACE mechanism documented in Documentation/s2ram.txt .
+use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt .
2. Testing suspend to RAM (STR)
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt
index 1101bee4e822..0e870825c1b9 100644
--- a/Documentation/power/userland-swsusp.txt
+++ b/Documentation/power/userland-swsusp.txt
@@ -77,7 +77,8 @@ SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in <PAGE_SIZE>
resume_swap_area, as defined in kernel/power/suspend_ioctls.h,
containing the resume device specification and the offset); for swap
partitions the offset is always 0, but it is different from zero for
- swap files (see Documentation/swsusp-and-swap-files.txt for details).
+ swap files (see Documentation/power/swsusp-and-swap-files.txt for
+ details).
SNAPSHOT_PLATFORM_SUPPORT - enable/disable the hibernation platform support,
depending on the argument value (enable, if the argument is nonzero)
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 83668e5dd17f..03c9d9299c6b 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -117,5 +117,4 @@ The contents of these variables corresponds to the "name", "state" and
"type" sysfs files explained above.
-For further details consult Documentation/ABI/stable/dev-rfkill and
-Documentation/ABI/stable/sysfs-class-rfkill.
+For further details consult Documentation/ABI/stable/sysfs-class-rfkill.
diff --git a/Documentation/scsi/aic7xxx_old.txt b/Documentation/scsi/aic7xxx_old.txt
index 7bd210ab45a1..ecfc474f36a8 100644
--- a/Documentation/scsi/aic7xxx_old.txt
+++ b/Documentation/scsi/aic7xxx_old.txt
@@ -444,7 +444,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD
Kernel Compile options
------------------------------
The various kernel compile time options for this driver are now fairly
- well documented in the file Documentation/Configure.help. In order to
+ well documented in the file drivers/scsi/Kconfig. In order to
see this documentation, you need to use one of the advanced configuration
programs (menuconfig and xconfig). If you are using the "make menuconfig"
method of configuring your kernel, then you would simply highlight the
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index 5f17d29c59b5..a340b18cd4eb 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -55,11 +55,6 @@ or in the same directory as the C source code. For example to find a url
about the USB mass storage driver see the
/usr/src/linux/drivers/usb/storage directory.
-The Linux kernel source Documentation/DocBook/scsidrivers.tmpl file
-refers to this file. With the appropriate DocBook tool-set, this permits
-users to generate html, ps and pdf renderings of information within this
-file (e.g. the interface functions).
-
Driver structure
================
Traditionally an LLD for the SCSI subsystem has been at least two files in
diff --git a/Documentation/security/keys-trusted-encrypted.txt b/Documentation/security/keys-trusted-encrypted.txt
index 5f50ccabfc8a..c9e4855ed3d7 100644
--- a/Documentation/security/keys-trusted-encrypted.txt
+++ b/Documentation/security/keys-trusted-encrypted.txt
@@ -156,4 +156,5 @@ Load an encrypted key "evm" from saved blob:
Other uses for trusted and encrypted keys, such as for disk and file encryption
are anticipated. In particular the new format 'ecryptfs' has been defined in
in order to use encrypted keys to mount an eCryptfs filesystem. More details
-about the usage can be found in the file 'Documentation/keys-ecryptfs.txt'.
+about the usage can be found in the file
+'Documentation/security/keys-ecryptfs.txt'.
diff --git a/Documentation/sound/oss/PAS16 b/Documentation/sound/oss/PAS16
index 951b3dce51b4..3dca4b75988e 100644
--- a/Documentation/sound/oss/PAS16
+++ b/Documentation/sound/oss/PAS16
@@ -60,8 +60,7 @@ With PAS16 you can use two audio device files at the same time. /dev/dsp (and
The new stuff for 2.3.99 and later
============================================================================
-The following configuration options from Documentation/Configure.help
-are relevant to configuring the PAS16:
+The following configuration options are relevant to configuring the PAS16:
Sound card support
CONFIG_SOUND
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index 00511e08db78..3352f97430e4 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -2,7 +2,7 @@ PXA2xx SPI on SSP driver HOWTO
===================================================
This a mini howto on the pxa2xx_spi driver. The driver turns a PXA2xx
synchronous serial port into a SPI master controller
-(see Documentation/spi/spi_summary). The driver has the following features
+(see Documentation/spi/spi-summary). The driver has the following features
- Support for any PXA2xx SSP
- SSP PIO and SSP DMA data transfers.
@@ -85,7 +85,7 @@ Declaring Slave Devices
-----------------------
Typically each SPI slave (chip) is defined in the arch/.../mach-*/board-*.c
using the "spi_board_info" structure found in "linux/spi/spi.h". See
-"Documentation/spi/spi_summary" for additional information.
+"Documentation/spi/spi-summary" for additional information.
Each slave device attached to the PXA must provide slave specific configuration
information via the structure "pxa2xx_spi_chip" found in
diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.txt
index 21332233cef1..e8789976e77c 100644
--- a/Documentation/timers/highres.txt
+++ b/Documentation/timers/highres.txt
@@ -30,7 +30,7 @@ hrtimer base infrastructure
---------------------------
The hrtimer base infrastructure was merged into the 2.6.16 kernel. Details of
-the base implementation are covered in Documentation/hrtimers/hrtimer.txt. See
+the base implementation are covered in Documentation/timers/hrtimers.txt. See
also figure #2 (OLS slides p. 15)
The main differences to the timer wheel, which holds the armed timer_list type
diff --git a/Documentation/usb/dma.txt b/Documentation/usb/dma.txt
index 84ef865237db..444651e70d95 100644
--- a/Documentation/usb/dma.txt
+++ b/Documentation/usb/dma.txt
@@ -7,7 +7,7 @@ API OVERVIEW
The big picture is that USB drivers can continue to ignore most DMA issues,
though they still must provide DMA-ready buffers (see
-Documentation/PCI/PCI-DMA-mapping.txt). That's how they've worked through
+Documentation/DMA-API-HOWTO.txt). That's how they've worked through
the 2.4 (and earlier) kernels.
OR: they can now be DMA-aware.
@@ -57,7 +57,7 @@ and effects like cache-trashing can impose subtle penalties.
force a consistent memory access ordering by using memory barriers. It's
not using a streaming DMA mapping, so it's good for small transfers on
systems where the I/O would otherwise thrash an IOMMU mapping. (See
- Documentation/PCI/PCI-DMA-mapping.txt for definitions of "coherent" and
+ Documentation/DMA-API-HOWTO.txt for definitions of "coherent" and
"streaming" DMA mappings.)
Asking for 1/Nth of a page (as well as asking for N pages) is reasonably
@@ -88,7 +88,7 @@ WORKING WITH EXISTING BUFFERS
Existing buffers aren't usable for DMA without first being mapped into the
DMA address space of the device. However, most buffers passed to your
driver can safely be used with such DMA mapping. (See the first section
-of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?")
+of Documentation/DMA-API-HOWTO.txt, titled "What memory is DMA-able?")
- When you're using scatterlists, you can map everything at once. On some
systems, this kicks in an IOMMU and turns the scatterlists into single
diff --git a/Documentation/virtual/lguest/lguest.c b/Documentation/virtual/lguest/lguest.c
index d928c134dee6..c095d79cae73 100644
--- a/Documentation/virtual/lguest/lguest.c
+++ b/Documentation/virtual/lguest/lguest.c
@@ -436,7 +436,7 @@ static unsigned long load_bzimage(int fd)
/*
* Go back to the start of the file and read the header. It should be
- * a Linux boot header (see Documentation/x86/i386/boot.txt)
+ * a Linux boot header (see Documentation/x86/boot.txt)
*/
lseek(fd, 0, SEEK_SET);
read(fd, &boot, sizeof(boot));
diff --git a/Documentation/vm/numa b/Documentation/vm/numa
index a200a386429d..ade01274212d 100644
--- a/Documentation/vm/numa
+++ b/Documentation/vm/numa
@@ -109,11 +109,11 @@ to improve NUMA locality using various CPU affinity command line interfaces,
such as taskset(1) and numactl(1), and program interfaces such as
sched_setaffinity(2). Further, one can modify the kernel's default local
allocation behavior using Linux NUMA memory policy.
-[see Documentation/vm/numa_memory_policy.]
+[see Documentation/vm/numa_memory_policy.txt.]
System administrators can restrict the CPUs and nodes' memories that a non-
privileged user can specify in the scheduling or NUMA commands and functions
-using control groups and CPUsets. [see Documentation/cgroups/CPUsets.txt]
+using control groups and CPUsets. [see Documentation/cgroups/cpusets.txt]
On architectures that do not hide memoryless nodes, Linux will include only
zones [nodes] with memory in the zonelists. This means that for a memoryless
diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt
index 07375e73981a..f464f47bc60d 100644
--- a/Documentation/vm/slub.txt
+++ b/Documentation/vm/slub.txt
@@ -17,7 +17,7 @@ data and perform operation on the slabs. By default slabinfo only lists
slabs that have data in them. See "slabinfo -h" for more options when
running the command. slabinfo can be compiled with
-gcc -o slabinfo Documentation/vm/slabinfo.c
+gcc -o slabinfo tools/slub/slabinfo.c
Some of the modes of operation of slabinfo require that slub debugging
be enabled on the command line. F.e. no tracking information will be
diff --git a/MAINTAINERS b/MAINTAINERS
index 914b8bd318ce..5ccf370e052b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4072,7 +4072,7 @@ S: Maintained
M32R ARCHITECTURE
M: Hirokazu Takata <takata@linux-m32r.org>
-L: linux-m32r@ml.linux-m32r.org
+L: linux-m32r@ml.linux-m32r.org (moderated for non-subscribers)
L: linux-m32r-ja@ml.linux-m32r.org (in Japanese)
W: http://www.linux-m32r.org/
S: Maintained
@@ -4241,7 +4241,7 @@ F: include/mtd/
MICROBLAZE ARCHITECTURE
M: Michal Simek <monstr@monstr.eu>
-L: microblaze-uclinux@itee.uq.edu.au
+L: microblaze-uclinux@itee.uq.edu.au (moderated for non-subscribers)
W: http://www.monstr.eu/fdt/
T: git git://git.monstr.eu/linux-2.6-microblaze.git
S: Supported
@@ -4745,7 +4745,7 @@ K: of_match_table
OPENRISC ARCHITECTURE
M: Jonas Bonn <jonas@southpole.se>
W: http://openrisc.net
-L: linux@lists.openrisc.net
+L: linux@lists.openrisc.net (moderated for non-subscribers)
S: Maintained
T: git git://openrisc.net/~jonas/linux
F: arch/openrisc
diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c
index f0df3fbd8402..b9fc6c309d2e 100644
--- a/arch/alpha/kernel/srm_env.c
+++ b/arch/alpha/kernel/srm_env.c
@@ -4,9 +4,8 @@
*
* (C) 2001,2002,2006 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
*
- * This driver is at all a modified version of Erik Mouw's
- * Documentation/DocBook/procfs_example.c, so: thank
- * you, Erik! He can be reached via email at
+ * This driver is a modified version of Erik Mouw's example proc
+ * interface, so: thank you, Erik! He can be reached via email at
* <J.A.K.Mouw@its.tudelft.nl>. It is based on an idea
* provided by DEC^WCompaq^WIntel's "Jumpstart" CD. They
* included a patch like this as well. Thanks for idea!
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 92e695412bd5..7536b9cbb072 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1394,7 +1394,7 @@ config SMP
processor machines. On a single processor machine, the kernel will
run faster if you say N here.
- See also <file:Documentation/i386/IO-APIC.txt>,
+ See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://tldp.org/HOWTO/SMP-HOWTO.html>.
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 769f65d918ac..065d100fa63e 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -260,7 +260,7 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
* ioremap and friends.
*
* ioremap takes a PCI memory address, as specified in
- * Documentation/IO-mapping.txt.
+ * Documentation/io-mapping.txt.
*
*/
#ifndef __arch_ioremap
diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig
index 457b4384913e..9170d16dca50 100644
--- a/arch/arm/mach-bcmring/Kconfig
+++ b/arch/arm/mach-bcmring/Kconfig
@@ -17,5 +17,3 @@ config BCM_ZRELADDR
hex "Compressed ZREL ADDR"
endmenu
-
-# source "drivers/char/bcmring/Kconfig"
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
index c48feaf4e8e9..437fa683bcb2 100644
--- a/arch/arm/mach-bcmring/irq.c
+++ b/arch/arm/mach-bcmring/irq.c
@@ -20,7 +20,6 @@
#include <linux/stddef.h>
#include <linux/list.h>
#include <linux/timer.h>
-#include <linux/version.h>
#include <linux/io.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
index 2d415d2a8e68..af9c3d7e2a0c 100644
--- a/arch/arm/mach-bcmring/timer.c
+++ b/arch/arm/mach-bcmring/timer.c
@@ -12,7 +12,6 @@
* consent.
*****************************************************************************/
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/module.h>
#include <csp/tmrHw.h>
diff --git a/arch/arm/mach-nuc93x/time.c b/arch/arm/mach-nuc93x/time.c
index 2f90f9dc6e30..f9807c029ec5 100644
--- a/arch/arm/mach-nuc93x/time.c
+++ b/arch/arm/mach-nuc93x/time.c
@@ -82,7 +82,7 @@ static void nuc93x_timer_setup(void)
timer0_load = (rate / TICKS_PER_SEC);
__raw_writel(timer0_load, REG_TICR0);
- val |= (PERIOD | COUNTEN | INTEN | PRESCALE);;
+ val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
__raw_writel(val, REG_TCSR0);
}
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 34c01a7de810..f49804f181d4 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
* driver register and sr device intializtion API's. Only one call
* will ultimately succeed.
*
- * Currently this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrupt handler for a particular SR
* if smartreflex class driver is already registered and has
* requested for interrupts and the SR interrupt line in present.
*/
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index acc600f5e72f..937c42845df9 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -142,8 +142,7 @@ static struct platform_device *devices[] __initdata = {
/* We have to state that there are HWMON devices on the I2C bus on XCEP.
* Drivers for HWMON verify capabilities of the adapter when loading and
- * refuse to attach if the adapter doesn't support HWMON class of devices.
- * See also Documentation/i2c/porting-clients. */
+ * refuse to attach if the adapter doesn't support HWMON class of devices. */
static struct i2c_pxa_platform_data xcep_i2c_platform_data = {
.class = I2C_CLASS_HWMON
};
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 83c56324a472..0a235e502330 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -60,7 +60,7 @@ static DEFINE_CLK(emc, 7);
static DEFINE_SUBCLK(rmii, 2);
static DEFINE_CLK(usbd, 8);
static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(g2d, 10);
static DEFINE_CLK(pwm, 18);
static DEFINE_CLK(ps2, 24);
static DEFINE_CLK(kpi, 25);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index a5353fc0793f..4c8fdbcc9467 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -39,7 +39,7 @@ config ARCH_MX503
select ARCH_MX50_SUPPORTED
select ARCH_MX53_SUPPORTED
help
- This enables support for machines using Freescale's i.MX50 and i.MX51
+ This enables support for machines using Freescale's i.MX50 and i.MX53
processors.
config ARCH_MX51
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 17addacb169e..408b055c585f 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -282,8 +282,8 @@ config ETRAX_RTC
Enables drivers for the Real-Time Clock battery-backed chips on
some products. The kernel reads the time when booting, and
the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
- rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
- device. You can check the time with cat /proc/rtc, but
+ rtc_time struct (see <file:arch/cris/include/asm/rtc.h>) on the
+ /dev/rtc device. You can check the time with cat /proc/rtc, but
normal time reading should be done using libc function time and
friends.
diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index adc164e99339..df9a38b4f18f 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -24,8 +24,8 @@ config ETRAX_PA_LEDS
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
- <file:include/asm-cris/io.h>, and those macros are defined after what
- YOU choose in this option. The actual bits used are configured
+ <file:arch/cris/include/asm/io.h>, and those macros are defined after
+ what YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on port PA. Some products
put the leds on PB or a memory-mapped latch (CSP0) instead.
@@ -34,8 +34,8 @@ config ETRAX_PB_LEDS
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
- <file:include/asm-cris/io.h>, and those macros are defined after what
- YOU choose in this option. The actual bits used are configured
+ <file:arch/cris/include/asm/io.h>, and those macros are defined after
+ what YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on port PB. Some products
put the leds on PA or a memory-mapped latch (CSP0) instead.
@@ -44,8 +44,8 @@ config ETRAX_CSP0_LEDS
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
- <file:include/asm-cris/io.h>, and those macros are defined after what
- YOU choose in this option. The actual bits used are configured
+ <file:arch/cris/include/asm/io.h>, and those macros are defined after
+ what YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on a memory-mapped latch
using chip select CSP0, this is mapped at 0x90000000.
Some products put the leds on PA or PB instead.
diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S
deleted file mode 100644
index d671fed451c9..000000000000
--- a/arch/cris/arch-v32/lib/nand_init.S
+++ /dev/null
@@ -1,178 +0,0 @@
-##=============================================================================
-##
-## nand_init.S
-##
-## The bootrom copies data from the NAND flash to the internal RAM but
-## due to a bug/feature we can only trust the 256 first bytes. So this
-## code copies more data from NAND flash to internal RAM. Obvioulsy this
-## code must fit in the first 256 bytes so alter with care.
-##
-## Some notes about the bug/feature for future reference:
-## The bootrom copies the first 127 KB from NAND flash to internal
-## memory. The problem is that it does a bytewise copy. NAND flashes
-## does autoincrement on the address so for a 16-bite device each
-## read/write increases the address by two. So the copy loop in the
-## bootrom will discard every second byte. This is solved by inserting
-## zeroes in every second byte in the first erase block.
-##
-## The bootrom also incorrectly assumes that it can read the flash
-## linear with only one read command but the flash will actually
-## switch between normal area and spare area if you do that so we
-## can't trust more than the first 256 bytes.
-##
-##=============================================================================
-
-#include <arch/hwregs/asm/reg_map_asm.h>
-#include <arch/hwregs/asm/gio_defs_asm.h>
-#include <arch/hwregs/asm/pinmux_defs_asm.h>
-#include <arch/hwregs/asm/bif_core_defs_asm.h>
-#include <arch/hwregs/asm/config_defs_asm.h>
-
-;; There are 8-bit NAND flashes and 16-bit NAND flashes.
-;; We need to treat them slightly different.
-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
-#define PAGE_SIZE 256
-#else
-#error 2
-#define PAGE_SIZE 512
-#endif
-#define ERASE_BLOCK 16384
-
-;; GPIO pins connected to NAND flash
-#define CE 4
-#define CLE 5
-#define ALE 6
-#define BY 7
-
-;; Address space for NAND flash
-#define NAND_RD_ADDR 0x90000000
-#define NAND_WR_ADDR 0x94000000
-
-#define READ_CMD 0x00
-
-;; Readability macros
-#define CSP_MASK \
- REG_MASK(bif_core, rw_grp3_cfg, gated_csp0) | \
- REG_MASK(bif_core, rw_grp3_cfg, gated_csp1)
-#define CSP_VAL \
- REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \
- REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr)
-
-;;----------------------------------------------------------------------------
-;; Macros to set/clear GPIO bits
-
-.macro SET x
- or.b (1<<\x),$r9
- move.d $r9, [$r2]
-.endm
-
-.macro CLR x
- and.b ~(1<<\x),$r9
- move.d $r9, [$r2]
-.endm
-
-;;----------------------------------------------------------------------------
-
-nand_boot:
- ;; Check if nand boot was selected
- move.d REG_ADDR(config, regi_config, r_bootsel), $r0
- move.d [$r0], $r0
- and.d REG_MASK(config, r_bootsel, boot_mode), $r0
- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0
- bne normal_boot ; No NAND boot
- nop
-
-copy_nand_to_ram:
- ;; copy_nand_to_ram
- ;; Arguments
- ;; r10 - destination
- ;; r11 - source offset
- ;; r12 - size
- ;; r13 - Address to jump to after completion
- ;; Note : r10-r12 are clobbered on return
- ;; Registers used:
- ;; r0 - NAND_RD_ADDR
- ;; r1 - NAND_WR_ADDR
- ;; r2 - reg_gio_rw_pa_dout
- ;; r3 - reg_gio_r_pa_din
- ;; r4 - tmp
- ;; r5 - byte counter within a page
- ;; r6 - reg_pinmux_rw_pa
- ;; r7 - reg_gio_rw_pa_oe
- ;; r8 - reg_bif_core_rw_grp3_cfg
- ;; r9 - reg_gio_rw_pa_dout shadow
- move.d 0x90000000, $r0
- move.d 0x94000000, $r1
- move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2
- move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3
- move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6
- move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7
- move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8
-
-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
- lsrq 1, $r11
-#endif
- ;; Set up GPIO
- move.d [$r2], $r9
- move.d [$r7], $r4
- or.b (1<<ALE) | (1 << CLE) | (1<<CE), $r4
- move.d $r4, [$r7]
-
- ;; Set up bif
- move.d [$r8], $r4
- and.d CSP_MASK, $r4
- or.d CSP_VAL, $r4
- move.d $r4, [$r8]
-
-1: ;; Copy one page
- CLR CE
- SET CLE
- moveq READ_CMD, $r4
- move.b $r4, [$r1]
- moveq 20, $r4
-2: bne 2b
- subq 1, $r4
- CLR CLE
- SET ALE
- clear.w [$r1] ; Column address = 0
- move.d $r11, $r4
- lsrq 8, $r4
- move.b $r4, [$r1] ; Row address
- lsrq 8, $r4
- move.b $r4, [$r1] ; Row address
- moveq 20, $r4
-2: bne 2b
- subq 1, $r4
- CLR ALE
-2: move.d [$r3], $r4
- and.d 1 << BY, $r4
- beq 2b
- movu.w PAGE_SIZE, $r5
-2: ; Copy one byte/word
-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
- move.w [$r0], $r4
-#else
- move.b [$r0], $r4
-#endif
- subq 1, $r5
- bne 2b
-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
- move.w $r4, [$r10+]
- subu.w PAGE_SIZE*2, $r12
-#else
- move.b $r4, [$r10+]
- subu.w PAGE_SIZE, $r12
-#endif
- bpl 1b
- addu.w PAGE_SIZE, $r11
-
- ;; End of copy
- jump $r13
- nop
-
- ;; This will warn if the code above is too large. If you consider
- ;; to remove this you don't understand the bug/feature.
- .org 256
- .org ERASE_BLOCK
-
-normal_boot:
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 091ed6192ae8..7ed7714573c8 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -160,7 +160,7 @@ config VT_CONSOLE
config HW_CONSOLE
bool
- depends on VT && !S390 && !UM
+ depends on VT
default y
comment "Unix98 PTY support"
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 80241fe03f50..f5f4ef149aac 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -915,7 +915,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
* @dir: R/W or both.
* @attrs: optional dma attributes
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static dma_addr_t sba_map_page(struct device *dev, struct page *page,
unsigned long poff, size_t size,
@@ -1044,7 +1044,7 @@ sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size)
* @dir: R/W or both.
* @attrs: optional dma attributes
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
enum dma_data_direction dir, struct dma_attrs *attrs)
@@ -1127,7 +1127,7 @@ void sba_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size,
* @size: number of bytes mapped in driver buffer.
* @dma_handle: IOVA of new buffer.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void *
sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
@@ -1190,7 +1190,7 @@ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp
* @vaddr: virtual address IOVA of "consistent" buffer.
* @dma_handler: IO virtual address of "consistent" buffer.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void sba_free_coherent (struct device *dev, size_t size, void *vaddr,
dma_addr_t dma_handle)
@@ -1453,7 +1453,7 @@ static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
* @dir: R/W or both.
* @attrs: optional dma attributes
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist,
int nents, enum dma_data_direction dir,
@@ -1549,7 +1549,7 @@ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist,
* @dir: R/W or both.
* @attrs: optional dma attributes
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
int nents, enum dma_data_direction dir,
diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README
index b26d5f55e91d..93f4c4cd3c45 100644
--- a/arch/m68k/q40/README
+++ b/arch/m68k/q40/README
@@ -31,7 +31,7 @@ drivers used by the Q40, apart from the very obvious (console etc.):
char/joystick/* # most of this should work, not
# in default config.in
block/q40ide.c # startup for ide
- ide* # see Documentation/ide.txt
+ ide* # see Documentation/ide/ide.txt
floppy.c # normal PC driver, DMA emu in asm/floppy.h
# and arch/m68k/kernel/entry.S
# see drivers/block/README.fd
diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h
index 8fbb0ec10233..a569514cf19f 100644
--- a/arch/microblaze/include/asm/dma-mapping.h
+++ b/arch/microblaze/include/asm/dma-mapping.h
@@ -16,7 +16,7 @@
#define _ASM_MICROBLAZE_DMA_MAPPING_H
/*
- * See Documentation/PCI/PCI-DMA-mapping.txt and
+ * See Documentation/DMA-API-HOWTO.txt and
* Documentation/DMA-API.txt for documentation.
*/
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index 213f2d671669..36a133e5ee35 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -304,11 +304,11 @@ asmlinkage void __init mmu_init(void)
/* Map in all of RAM starting at CONFIG_KERNEL_START */
mapin_ram();
-#ifdef HIGHMEM_START_BOOL
- ioremap_base = HIGHMEM_START;
+#ifdef CONFIG_HIGHMEM_START_BOOL
+ ioremap_base = CONFIG_HIGHMEM_START;
#else
ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
+#endif /* CONFIG_HIGHMEM_START_BOOL */
ioremap_bot = ioremap_base;
/* Initialize the context management stuff */
diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h
index a1ada1c27c16..e8ff70f80e13 100644
--- a/arch/mips/include/asm/lasat/lasat.h
+++ b/arch/mips/include/asm/lasat/lasat.h
@@ -41,10 +41,8 @@ enum lasat_mtdparts {
/*
* The format of the data record in the EEPROM.
- * See Documentation/LASAT/eeprom.txt for a detailed description
- * of the fields in this struct, and the LASAT Hardware Configuration
- * field specification for a detailed description of the config
- * field.
+ * See the LASAT Hardware Configuration field specification for a detailed
+ * description of the config field.
*/
#include <linux/types.h>
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 1f870340ebdd..f093b3a8a4a1 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -195,7 +195,7 @@ config SMP
singleprocessor machines. On a singleprocessor machine, the kernel
will run faster if you say N here.
- See also <file:Documentation/i386/IO-APIC.txt>,
+ See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
index 2623d19f4f4c..2381df83bd00 100644
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@@ -260,7 +260,6 @@ void set_intr_level(int irq, u16 level)
/*
* mark an interrupt to be ACK'd after interrupt handlers have been run rather
* than before
- * - see Documentation/mn10300/features.txt
*/
void mn10300_set_lateack_irq_type(int irq)
{
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 4558bafbd1a2..9460e1c266dd 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -1,6 +1,6 @@
#
# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/config-language.txt.
+# see Documentation/kbuild/kconfig-language.txt.
#
config OPENRISC
diff --git a/arch/openrisc/include/asm/dma-mapping.h b/arch/openrisc/include/asm/dma-mapping.h
index 60b472233900..b206ba4608b2 100644
--- a/arch/openrisc/include/asm/dma-mapping.h
+++ b/arch/openrisc/include/asm/dma-mapping.h
@@ -18,7 +18,7 @@
#define __ASM_OPENRISC_DMA_MAPPING_H
/*
- * See Documentation/PCI/PCI-DMA-mapping.txt and
+ * See Documentation/DMA-API-HOWTO.txt and
* Documentation/DMA-API.txt for documentation.
*
* This file is written with the intention of eventually moving over
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index e077b0bf56ca..fdfd8be29e95 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -169,9 +169,7 @@ config 64BIT
choice
prompt "Kernel page size"
- default PARISC_PAGE_SIZE_4KB if !64BIT
- default PARISC_PAGE_SIZE_4KB if 64BIT
-# default PARISC_PAGE_SIZE_16KB if 64BIT
+ default PARISC_PAGE_SIZE_4KB
config PARISC_PAGE_SIZE_4KB
bool "4KB"
diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h
index 890531e32fe8..467bbd510eac 100644
--- a/arch/parisc/include/asm/dma-mapping.h
+++ b/arch/parisc/include/asm/dma-mapping.h
@@ -5,7 +5,7 @@
#include <asm/cacheflush.h>
#include <asm/scatterlist.h>
-/* See Documentation/PCI/PCI-DMA-mapping.txt */
+/* See Documentation/DMA-API-HOWTO.txt */
struct hppa_dma_ops {
int (*dma_supported)(struct device *dev, u64 mask);
void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag);
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index a029f74a3c5c..d047edea2504 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -2,7 +2,7 @@
** PARISC 1.1 Dynamic DMA mapping support.
** This implementation is for PA-RISC platforms that do not support
** I/O TLBs (aka DMA address translation hardware).
-** See Documentation/PCI/PCI-DMA-mapping.txt for interface definitions.
+** See Documentation/DMA-API-HOWTO.txt for interface definitions.
**
** (c) Copyright 1999,2000 Hewlett-Packard Company
** (c) Copyright 2000 Grant Grundler
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 0947b36e534c..5e0b6d511e14 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -196,7 +196,7 @@ static inline int qe_alive_during_sleep(void)
/* Structure that defines QE firmware binary files.
*
- * See Documentation/powerpc/qe-firmware.txt for a description of these
+ * See Documentation/powerpc/qe_firmware.txt for a description of these
* fields.
*/
struct qe_firmware {
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 498534cd5265..12f5932dadc9 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -80,7 +80,7 @@ config P1010_RDB
config P1022_DS
bool "Freescale P1022 DS"
select DEFAULT_UIMAGE
- select CONFIG_PHYS_64BIT # The DTS has 36-bit addresses
+ select PHYS_64BIT # The DTS has 36-bit addresses
select SWIOTLB
help
This option enables support for the Freescale P1022DS reference board.
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 613070e9ddbe..f1eebcae9bf0 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void)
}
/*
- * Interrupt setup and service. Interrrupts on the turbostation come
+ * Interrupt setup and service. Interrupts on the turbostation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init storcenter_init_IRQ(void)
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 904c6cbaf45b..3363fbc964f8 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -382,7 +382,7 @@ static void qe_upload_microcode(const void *base,
/*
* Upload a microcode to the I-RAM at a specific address.
*
- * See Documentation/powerpc/qe-firmware.txt for information on QE microcode
+ * See Documentation/powerpc/qe_firmware.txt for information on QE microcode
* uploading.
*
* Currently, only version 1 is supported, so the 'version' field must be
diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c
index 6023c6dc1fb7..74c8f5e76ce4 100644
--- a/arch/s390/hypfs/hypfs_diag.c
+++ b/arch/s390/hypfs/hypfs_diag.c
@@ -562,10 +562,9 @@ static int dbfs_d204_create(void **data, void **data_free_ptr, size_t *size)
void *base;
buf_size = PAGE_SIZE * (diag204_buf_pages + 1) + sizeof(d204->hdr);
- base = vmalloc(buf_size);
+ base = vzalloc(buf_size);
if (!base)
return -ENOMEM;
- memset(base, 0, buf_size);
d204 = page_align_ptr(base + sizeof(d204->hdr)) - sizeof(d204->hdr);
rc = diag204_do_store(d204->buf, diag204_buf_pages);
if (rc) {
diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h
index 4bd87f3d13d4..1a5c5a5eb39c 100644
--- a/arch/unicore32/include/asm/io.h
+++ b/arch/unicore32/include/asm/io.h
@@ -32,7 +32,7 @@ extern void __uc32_iounmap(volatile void __iomem *addr);
* ioremap and friends.
*
* ioremap takes a PCI memory address, as specified in
- * Documentation/IO-mapping.txt.
+ * Documentation/io-mapping.txt.
*
*/
#define ioremap(cookie, size) __uc32_ioremap(cookie, size)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6a47bb22657f..9a4a267a8a55 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -279,7 +279,7 @@ config SMP
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
Management" code will be disabled if you say Y here.
- See also <file:Documentation/i386/IO-APIC.txt>,
+ See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index c0f8a5c88910..bf56e1793272 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -139,7 +139,7 @@ config IOMMU_DEBUG
code. When you use it make sure you have a big enough
IOMMU/AGP aperture. Most of the options enabled by this can
be set more finegrained using the iommu= command line
- options. See Documentation/x86_64/boot-options.txt for more
+ options. See Documentation/x86/x86_64/boot-options.txt for more
details.
config IOMMU_STRESS
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 93e689f4bd86..bdb4d458ec8c 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -129,7 +129,7 @@ start_sys_seg: .word SYSSEG # obsolete and meaningless, but just
type_of_loader: .byte 0 # 0 means ancient bootloader, newer
# bootloaders know to change this.
- # See Documentation/i386/boot.txt for
+ # See Documentation/x86/boot.txt for
# assigned ids
# flags, unused bits must be zero (RFU) bit within loadflags
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index d4c419f883a0..ed3065fd6314 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -2,7 +2,7 @@
#define _ASM_X86_DMA_MAPPING_H
/*
- * IOMMU interface. See Documentation/PCI/PCI-DMA-mapping.txt and
+ * IOMMU interface. See Documentation/DMA-API-HOWTO.txt and
* Documentation/DMA-API.txt for documentation.
*/
diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c
index 8a439d364b94..b1e7c7f7a0af 100644
--- a/arch/x86/kernel/amd_gart_64.c
+++ b/arch/x86/kernel/amd_gart_64.c
@@ -5,7 +5,7 @@
* This allows to use PCI devices that only support 32bit addresses on systems
* with more than 4GB.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt for the interface specification.
+ * See Documentation/DMA-API-HOWTO.txt for the interface specification.
*
* Copyright 2002 Andi Kleen, SuSE Labs.
* Subject to the GNU General Public License v2 only.
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 0371c484bb8a..a46bd383953c 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -249,8 +249,6 @@ extern int (*console_blank_hook)(int);
#define APM_MINOR_DEV 134
/*
- * See Documentation/Config.help for the configuration options.
- *
* Various options can be changed at boot time as follows:
* (We allow underscores for compatibility with the modules code)
* apm=on/off enable/disable APM
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index b49d00da2aed..622872054fbe 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -117,8 +117,8 @@ again:
}
/*
- * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
- * documentation.
+ * See <Documentation/x86/x86_64/boot-options.txt> for the iommu kernel
+ * parameter documentation.
*/
static __init int iommu_setup(char *p)
{
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 7a3b65107a27..2196c703c5e2 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -262,7 +262,7 @@ EXPORT_SYMBOL_GPL(start_thread);
/*
- * switch_to(x,yn) should switch tasks from x to y.
+ * switch_to(x,y) should switch tasks from x to y.
*
* We fsave/fwait so that an exception goes off at the right time
* (as a call from the fsave or fwait in effect) rather than to
diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
index 67421f38a215..de54b9b278a7 100644
--- a/arch/x86/mm/mmio-mod.c
+++ b/arch/x86/mm/mmio-mod.c
@@ -29,7 +29,6 @@
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/io.h>
-#include <linux/version.h>
#include <linux/kallsyms.h>
#include <asm/pgtable.h>
#include <linux/mmiotrace.h>
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index db06f34419cf..1c052127548c 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3416,27 +3416,28 @@ init_card(struct atm_dev *dev)
size = sizeof(struct vc_map *) * card->tct_size;
IPRINTK("%s: allocate %d byte for VC map.\n", card->name, size);
- if (NULL == (card->vcs = vmalloc(size))) {
+ card->vcs = vzalloc(size);
+ if (!card->vcs) {
printk("%s: memory allocation failure.\n", card->name);
deinit_card(card);
return -1;
}
- memset(card->vcs, 0, size);
size = sizeof(struct vc_map *) * card->scd_size;
IPRINTK("%s: allocate %d byte for SCD to VC mapping.\n",
card->name, size);
- if (NULL == (card->scd2vc = vmalloc(size))) {
+ card->scd2vc = vzalloc(size);
+ if (!card->scd2vc) {
printk("%s: memory allocation failure.\n", card->name);
deinit_card(card);
return -1;
}
- memset(card->scd2vc, 0, size);
size = sizeof(struct tst_info) * (card->tst_size - 2);
IPRINTK("%s: allocate %d byte for TST to VC mapping.\n",
card->name, size);
- if (NULL == (card->soft_tst = vmalloc(size))) {
+ card->soft_tst = vmalloc(size);
+ if (!card->soft_tst) {
printk("%s: memory allocation failure.\n", card->name);
deinit_card(card);
return -1;
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index e828c5487493..f5569699f31c 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -1457,10 +1457,9 @@ static int __devinit vcc_table_allocate(struct lanai_dev *lanai)
return (lanai->vccs == NULL) ? -ENOMEM : 0;
#else
int bytes = (lanai->num_vci) * sizeof(struct lanai_vcc *);
- lanai->vccs = (struct lanai_vcc **) vmalloc(bytes);
+ lanai->vccs = vzalloc(bytes);
if (unlikely(lanai->vccs == NULL))
return -ENOMEM;
- memset(lanai->vccs, 0, bytes);
return 0;
#endif
}
diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c
index 7b976296b564..912f585a760f 100644
--- a/drivers/block/drbd/drbd_bitmap.c
+++ b/drivers/block/drbd/drbd_bitmap.c
@@ -378,15 +378,14 @@ static struct page **bm_realloc_pages(struct drbd_bitmap *b, unsigned long want)
* thread. As we have no disk yet, we are not in the IO path,
* not even the IO path of the peer. */
bytes = sizeof(struct page *)*want;
- new_pages = kmalloc(bytes, GFP_KERNEL);
+ new_pages = kzalloc(bytes, GFP_KERNEL);
if (!new_pages) {
- new_pages = vmalloc(bytes);
+ new_pages = vzalloc(bytes);
if (!new_pages)
return NULL;
vmalloced = 1;
}
- memset(new_pages, 0, bytes);
if (want >= have) {
for (i = 0; i < have; i++)
new_pages[i] = old_pages[i];
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index ef2ceed3be4b..1706d60b8c99 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -28,7 +28,6 @@
#include <linux/compiler.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/bitops.h>
@@ -928,7 +927,7 @@ struct drbd_md {
#define NL_INT64(pn,pr,member) __u64 member;
#define NL_BIT(pn,pr,member) unsigned member:1;
#define NL_STRING(pn,pr,member,len) unsigned char member[len]; int member ## _len;
-#include "linux/drbd_nl.h"
+#include <linux/drbd_nl.h>
struct drbd_backing_dev {
struct block_device *backing_bdev;
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 0feab261e295..af2a25049bce 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -94,7 +94,7 @@ static int name ## _from_tags(struct drbd_conf *mdev, \
arg->member ## _len = dlen; \
memcpy(arg->member, tags, min_t(size_t, dlen, len)); \
break;
-#include "linux/drbd_nl.h"
+#include <linux/drbd_nl.h>
/* Generate the struct to tag_list functions */
#define NL_PACKET(name, number, fields) \
@@ -129,7 +129,7 @@ name ## _to_tags(struct drbd_conf *mdev, \
put_unaligned(arg->member ## _len, tags++); \
memcpy(tags, arg->member, arg->member ## _len); \
tags = (unsigned short *)((char *)tags + arg->member ## _len);
-#include "linux/drbd_nl.h"
+#include <linux/drbd_nl.h>
void drbd_bcast_ev_helper(struct drbd_conf *mdev, char *helper_name);
void drbd_nl_send_reply(struct cn_msg *, int);
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 15f65b5f3fc7..fe3c3249cec4 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -192,7 +192,7 @@ static ssize_t rbd_snap_add(struct device *dev,
const char *buf,
size_t count);
static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
- struct rbd_snap *snap);;
+ struct rbd_snap *snap);
static struct rbd_device *dev_to_rbd(struct device *dev)
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 00c57c90e2d6..c4bd34063ecc 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -27,7 +27,6 @@
#ifndef __XEN_BLKIF__BACKEND__COMMON_H__
#define __XEN_BLKIF__BACKEND__COMMON_H__
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 7f521d4ac657..c827d737ccee 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -81,7 +81,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = {
.io_port_2 = 0x7a,
};
-static const struct btmrvl_sdio_device btmrvl_sdio_sd6888 = {
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
.helper = "sd8688_helper.bin",
.firmware = "sd8688.bin",
.reg = &btmrvl_reg_8688,
@@ -98,7 +98,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8688 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
- .driver_data = (unsigned long) &btmrvl_sdio_sd6888 },
+ .driver_data = (unsigned long) &btmrvl_sdio_sd8688 },
/* Marvell SD8787 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index f27d0d0816d3..4b71647782d0 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -171,7 +171,7 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
}
got_gatt = 1;
- bridge->key_list = vmalloc(PAGE_SIZE * 4);
+ bridge->key_list = vzalloc(PAGE_SIZE * 4);
if (bridge->key_list == NULL) {
dev_err(&bridge->dev->dev,
"can't allocate memory for key lists\n");
@@ -181,7 +181,6 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
got_keylist = 1;
/* FIXME vmalloc'd memory not guaranteed contiguous */
- memset(bridge->key_list, 0, PAGE_SIZE * 4);
if (bridge->driver->configure()) {
dev_err(&bridge->dev->dev, "error configuring host chipset\n");
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index 2a2b8fd708c1..f4837a893dfa 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -40,10 +40,7 @@
#define APM_MINOR_DEV 134
/*
- * See Documentation/Config.help for the configuration options.
- *
- * Various options can be changed at boot time as follows:
- * (We allow underscores for compatibility with the modules code)
+ * One option can be changed at boot time as follows:
* apm=on/off enable/disable APM
*/
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index b33e8ea314ed..b6de2c047145 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -324,13 +324,12 @@ static int __init raw_init(void)
max_raw_minors = MAX_RAW_MINORS;
}
- raw_devices = vmalloc(sizeof(struct raw_device_data) * max_raw_minors);
+ raw_devices = vzalloc(sizeof(struct raw_device_data) * max_raw_minors);
if (!raw_devices) {
printk(KERN_ERR "Not enough memory for raw device structures\n");
ret = -ENOMEM;
goto error;
}
- memset(raw_devices, 0, sizeof(struct raw_device_data) * max_raw_minors);
ret = register_chrdev_region(dev, max_raw_minors, "raw");
if (ret)
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index dfa8b3062fda..ccd124ab7ca7 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -80,6 +80,7 @@
#include <linux/bcd.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
+#include <linux/ratelimit.h>
#include <asm/current.h>
#include <asm/system.h>
@@ -1195,10 +1196,8 @@ static void rtc_dropped_irq(unsigned long data)
spin_unlock_irq(&rtc_lock);
- if (printk_ratelimit()) {
- printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
- freq);
- }
+ printk_ratelimited(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
+ freq);
/* Now we have new data */
wake_up_interruptible(&rtc_wait);
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 891360edecdd..629b3ec698e2 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -725,7 +725,7 @@ static int __init cpufreq_gov_dbs_init(void)
dbs_tuners_ins.down_differential =
MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
/*
- * In no_hz/micro accounting case we set the minimum frequency
+ * In nohz/micro accounting case we set the minimum frequency
* not depending on HZ, but fixed (very low). The deferred
* timer might skip some samples if idle/sleeping as needed.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 7fd4e3e5ad5f..3475a09f946b 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -48,7 +48,7 @@ static void radeon_fence_write(struct radeon_device *rdev, u32 seq)
scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
else
scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
- rdev->wb.wb[scratch_index/4] = cpu_to_le32(seq);;
+ rdev->wb.wb[scratch_index/4] = cpu_to_le32(seq);
} else
WREG32(rdev->fence_drv.scratch_reg, seq);
}
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index b7a51c43b185..1b42b50b5992 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -390,7 +390,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
int tx_limit, rx_limit;
u32 addr = msgs[dev->msg_write_idx].addr;
u32 buf_len = dev->tx_buf_len;
- u8 *buf = dev->tx_buf;;
+ u8 *buf = dev->tx_buf;
intr_mask = DW_IC_INTR_DEFAULT_MASK;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 811dbbd9306c..76b6d98bd295 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -681,7 +681,7 @@ config BLK_DEV_IDE_AU1XXX
select IDE_XFER_MODE
choice
prompt "IDE Mode for AMD Alchemy Au1200"
- default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ default BLK_DEV_IDE_AU1XXX_PIO_DBDMA
depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index 2c8b84dd9dac..2be21694fac1 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -7,7 +7,7 @@
* state machine code inspired by code from Tim Ruetz
*
* A generic driver for rotary encoders connected to GPIO lines.
- * See file:Documentation/input/rotary_encoder.txt for more information
+ * See file:Documentation/input/rotary-encoder.txt for more information
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index 6ed82add6ffa..6ddb795e31c5 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -2308,11 +2308,11 @@ static int __init isdn_init(void)
int i;
char tmprev[50];
- if (!(dev = vmalloc(sizeof(isdn_dev)))) {
+ dev = vzalloc(sizeof(isdn_dev));
+ if (!dev) {
printk(KERN_WARNING "isdn: Could not allocate device-struct.\n");
return -EIO;
}
- memset((char *) dev, 0, sizeof(isdn_dev));
init_timer(&dev->timer);
dev->timer.function = isdn_timer_funct;
spin_lock_init(&dev->lock);
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 2877291a9ed8..0c41553ce684 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -1052,12 +1052,11 @@ dspcreate(struct channel_req *crq)
if (crq->protocol != ISDN_P_B_L2DSP
&& crq->protocol != ISDN_P_B_L2DSPHDLC)
return -EPROTONOSUPPORT;
- ndsp = vmalloc(sizeof(struct dsp));
+ ndsp = vzalloc(sizeof(struct dsp));
if (!ndsp) {
printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__);
return -ENOMEM;
}
- memset(ndsp, 0, sizeof(struct dsp));
if (dsp_debug & DEBUG_DSP_CTRL)
printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__);
diff --git a/drivers/isdn/mISDN/l1oip_codec.c b/drivers/isdn/mISDN/l1oip_codec.c
index bbfd1b863ed3..5a89972624d8 100644
--- a/drivers/isdn/mISDN/l1oip_codec.c
+++ b/drivers/isdn/mISDN/l1oip_codec.c
@@ -330,14 +330,12 @@ l1oip_4bit_alloc(int ulaw)
return 0;
/* alloc conversion tables */
- table_com = vmalloc(65536);
- table_dec = vmalloc(512);
+ table_com = vzalloc(65536);
+ table_dec = vzalloc(512);
if (!table_com || !table_dec) {
l1oip_4bit_free();
return -ENOMEM;
}
- memset(table_com, 0, 65536);
- memset(table_dec, 0, 512);
/* generate compression table */
i1 = 0;
while (i1 < 256) {
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b591e726a6fa..807c875f1c2e 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -400,7 +400,7 @@ config LEDS_TRIGGER_TIMER
This allows LEDs to be controlled by a programmable timer
via sysfs. Some LED hardware can be programmed to start
blinking the LED without any further software interaction.
- For more details read Documentation/leds-class.txt.
+ For more details read Documentation/leds/leds-class.txt.
If unsure, say Y.
diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c
index c3bc64ed405c..7e3961d0db6b 100644
--- a/drivers/media/dvb/dvb-usb/af9005-remote.c
+++ b/drivers/media/dvb/dvb-usb/af9005-remote.c
@@ -21,7 +21,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * see Documentation/dvb/REDME.dvb-usb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*/
#include "af9005.h"
/* debug */
diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c
index 51f6439dcfd5..0351c0e52dd2 100644
--- a/drivers/media/dvb/dvb-usb/af9005.c
+++ b/drivers/media/dvb/dvb-usb/af9005.c
@@ -19,7 +19,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * see Documentation/dvb/REDME.dvb-usb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*/
#include "af9005.h"
diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb/frontends/dib3000.h
index ba917359fa65..404f63a6f26b 100644
--- a/drivers/media/dvb/frontends/dib3000.h
+++ b/drivers/media/dvb/frontends/dib3000.h
@@ -17,7 +17,7 @@
* Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
- * see Documentation/dvb/README.dibusb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*
*/
diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c
index e80c59796368..437904cbf3e6 100644
--- a/drivers/media/dvb/frontends/dib3000mb.c
+++ b/drivers/media/dvb/frontends/dib3000mb.c
@@ -17,7 +17,7 @@
* Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
- * see Documentation/dvb/README.dibusb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*
*/
diff --git a/drivers/media/radio/wl128x/fmdrv_v4l2.c b/drivers/media/radio/wl128x/fmdrv_v4l2.c
index 8c0e19276970..ec1d52f38904 100644
--- a/drivers/media/radio/wl128x/fmdrv_v4l2.c
+++ b/drivers/media/radio/wl128x/fmdrv_v4l2.c
@@ -402,7 +402,7 @@ static int fm_v4l2_vidioc_s_hw_freq_seek(struct file *file, void *priv,
static int fm_v4l2_vidioc_g_modulator(struct file *file, void *priv,
struct v4l2_modulator *mod)
{
- struct fmdev *fmdev = video_drvdata(file);;
+ struct fmdev *fmdev = video_drvdata(file);
if (mod->index != 0)
return -EINVAL;
diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h
index 05fe6bdbe062..b63fdfaac49e 100644
--- a/drivers/media/video/cx18/cx18-mailbox.h
+++ b/drivers/media/video/cx18/cx18-mailbox.h
@@ -69,7 +69,7 @@ struct cx18_mailbox {
/* Each command can have up to 6 arguments */
u32 args[MAX_MB_ARGUMENTS];
/* The return code can be one of the codes in the file cx23418.h. If the
- command is completed successfuly, the error will be ERR_SYS_SUCCESS.
+ command is completed successfully, the error will be ERR_SYS_SUCCESS.
If it is pending, the code is ERR_SYS_PENDING. If it failed, the error
code would indicate the task from which the error originated and will
be one of the errors in cx23418.h. In that case, the following
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 4be8373d43e5..66b616ebe536 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -142,7 +142,7 @@ config MTD_OF_PARTS
help
This provides a partition parsing function which derives
the partition map from the children of the flash node,
- as described in Documentation/powerpc/booting-without-of.txt.
+ as described in Documentation/devicetree/booting-without-of.txt.
config MTD_AR7_PARTS
tristate "TI AR7 partitioning support"
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a44874e24f2a..ddd63e7cf4ae 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1063,8 +1063,7 @@ config SMSC911X
Say Y here if you want support for SMSC LAN911x and LAN921x families
of ethernet controllers.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called smsc911x.
config SMSC911X_ARCH_HOOKS
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index c827a6097d02..8d0baeceaaa3 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -414,7 +414,7 @@ ks8695_tx_irq(int irq, void *dev_id)
* Interrupt Status Register (Offset 0xF208)
* Bit29: WAN MAC Receive Status
* Bit16: LAN MAC Receive Status
- * So, this Rx interrrupt enable/status bit number is equal
+ * So, this Rx interrupt enable/status bit number is equal
* as Rx IRQ number.
*/
static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 97e6954304ea..9f3e5306ef79 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -858,7 +858,7 @@ static s32 atl1_init_hw(struct atl1_hw *hw)
atl1_init_flash_opcode(hw);
if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
+ /* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index fc50d4267df8..99d31a7d6aaa 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -5617,7 +5617,7 @@ struct l2_fhdr {
#define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_TXP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_TXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TXP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_TXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_TXP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5712,7 +5712,7 @@ struct l2_fhdr {
#define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_TPAT_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_TPAT_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TPAT_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_TPAT_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5807,7 +5807,7 @@ struct l2_fhdr {
#define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_RXP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_RXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_RXP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_RXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_RXP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5953,7 +5953,7 @@ struct l2_fhdr {
#define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_COM_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_COM_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_COM_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_COM_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_COM_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -6119,7 +6119,7 @@ struct l2_fhdr {
#define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_CP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_CP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_CP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_CP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_CP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -6291,7 +6291,7 @@ struct l2_fhdr {
#define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_MCP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_MCP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_MCP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_MCP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_MCP_CPU_STATE_BLOCKED_READ (1L<<31)
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
index cee6ba2b8b58..c3dd9d09be57 100644
--- a/drivers/net/can/sja1000/sja1000_of_platform.c
+++ b/drivers/net/can/sja1000/sja1000_of_platform.c
@@ -29,7 +29,7 @@
* nxp,external-clock-frequency = <16000000>;
* };
*
- * See "Documentation/powerpc/dts-bindings/can/sja1000.txt" for further
+ * See "Documentation/devicetree/bindings/net/can/sja1000.txt" for further
* information.
*/
diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c
index 74f2f11ac290..469d95eaa154 100644
--- a/drivers/net/igb/e1000_mbx.c
+++ b/drivers/net/igb/e1000_mbx.c
@@ -34,7 +34,7 @@
* @size: Length of buffer
* @mbx_id: id of mailbox to read
*
- * returns SUCCESS if it successfuly read message from buffer
+ * returns SUCCESS if it successfully read message from buffer
**/
s32 igb_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
{
diff --git a/drivers/net/igbvf/mbx.c b/drivers/net/igbvf/mbx.c
index 3d6f4cc3998a..048aae248d06 100644
--- a/drivers/net/igbvf/mbx.c
+++ b/drivers/net/igbvf/mbx.c
@@ -288,7 +288,7 @@ out_no_write:
* @msg: The message buffer
* @size: Length of buffer
*
- * returns SUCCESS if it successfuly read message from buffer
+ * returns SUCCESS if it successfully read message from buffer
**/
static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
{
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 25bb2a015e18..a40fab44b9ae 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -183,7 +183,7 @@ config OLD_BELKIN_DONGLE
Say Y here if you want to build support for the Adaptec Airport 1000
and 2000 dongles. If you want to compile it as a module, choose
M here. Some information is contained in the comments
- at the top of <file:drivers/net/irda/old_belkin.c>.
+ at the top of <file:drivers/net/irda/old_belkin-sir.c>.
config ACT200L_DONGLE
tristate "ACTiSYS IR-200L dongle"
diff --git a/drivers/net/ixgbe/ixgbe_mbx.c b/drivers/net/ixgbe/ixgbe_mbx.c
index 1ff0eefcfd0a..3f725d48336d 100644
--- a/drivers/net/ixgbe/ixgbe_mbx.c
+++ b/drivers/net/ixgbe/ixgbe_mbx.c
@@ -38,7 +38,7 @@
* @size: Length of buffer
* @mbx_id: id of mailbox to read
*
- * returns SUCCESS if it successfuly read message from buffer
+ * returns SUCCESS if it successfully read message from buffer
**/
s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
{
diff --git a/drivers/net/ixgbevf/mbx.c b/drivers/net/ixgbevf/mbx.c
index 7a8833125770..930fa83f2568 100644
--- a/drivers/net/ixgbevf/mbx.c
+++ b/drivers/net/ixgbevf/mbx.c
@@ -276,7 +276,7 @@ out_no_write:
* @msg: The message buffer
* @size: Length of buffer
*
- * returns 0 if it successfuly read message from buffer
+ * returns 0 if it successfully read message from buffer
**/
static s32 ixgbevf_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size)
{
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index d84c4224dd12..e8be47d6d7d0 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -553,7 +553,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
/*
* There is no BCM5481 specification available, so down
* here is everything we know about "register 0x18". This
- * at least helps BCM5481 to successfuly receive packets
+ * at least helps BCM5481 to successfully receive packets
* on MPC8360E-RDK board. Peter Barada <peterb@logicpd.com>
* says: "This sets delay between the RXD and RXC signals
* instead of using trace lengths to achieve timing".
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 57339da76326..d7f879dfb1c9 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2057,7 +2057,7 @@ static void sky2_hw_down(struct sky2_port *sky2)
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- /* Force any delayed status interrrupt and NAPI */
+ /* Force any delayed status interrupt and NAPI */
sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c
index 1e2af96fc29c..7b46e75deb5a 100644
--- a/drivers/net/tile/tilepro.c
+++ b/drivers/net/tile/tilepro.c
@@ -177,7 +177,7 @@ struct tile_net_cpu {
struct tile_net_stats_t stats;
/* True iff NAPI is enabled. */
bool napi_enabled;
- /* True if this tile has succcessfully registered with the IPP. */
+ /* True if this tile has successfully registered with the IPP. */
bool registered;
/* True if the link was down last time we tried to register. */
bool link_down;
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index 092c3faa882a..25b8deedbef8 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller
Hardware Reference Manual" is currently available at :
http://developer.intel.com/design/network/manuals/278074.htm
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index fa5eee925f25..14d5b611783d 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -7,8 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
Please submit bug reports to http://bugzilla.kernel.org/.
*/
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index 5350d753e0ff..4fb8c8c0a420 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -7,10 +7,7 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
Please submit bugs to http://bugzilla.kernel.org/ .
-
*/
#include <linux/pci.h>
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index 4bd13922875d..beeb17b52ad4 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c
index 52d898bdbeb4..9c16e4ad02a6 100644
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/tulip/pnic.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index 93358ee4d830..04a7e477eaff 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -8,9 +8,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index 2017faf2d0e6..19078d28ffb9 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 9db528967da9..fb3887c18dc6 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 1246998a677c..b905c0dc5648 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -6,9 +6,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/wireless/ipw2x00/libipw_tx.c b/drivers/net/wireless/ipw2x00/libipw_tx.c
index 01c88a71abe1..e8c039879b05 100644
--- a/drivers/net/wireless/ipw2x00/libipw_tx.c
+++ b/drivers/net/wireless/ipw2x00/libipw_tx.c
@@ -395,7 +395,7 @@ netdev_tx_t libipw_xmit(struct sk_buff *skb, struct net_device *dev)
(CFG_LIBIPW_COMPUTE_FCS | CFG_LIBIPW_RESERVE_FCS))
bytes_per_frag -= LIBIPW_FCS_LEN;
- /* Each fragment may need to have room for encryptiong
+ /* Each fragment may need to have room for encryption
* pre/postfix */
if (host_encrypt)
bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
diff --git a/drivers/net/wireless/libertas_tf/deb_defs.h b/drivers/net/wireless/libertas_tf/deb_defs.h
index ae753962d8b5..4bd3dc5adf7c 100644
--- a/drivers/net/wireless/libertas_tf/deb_defs.h
+++ b/drivers/net/wireless/libertas_tf/deb_defs.h
@@ -3,7 +3,7 @@
* global variable declaration.
*/
#ifndef _LBS_DEB_DEFS_H_
-#define _LBS_DEB_EFS_H_
+#define _LBS_DEB_DEFS_H_
#ifndef DRV_NAME
#define DRV_NAME "libertas_tf"
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 56f12358389d..f8648b7288d5 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -488,7 +488,7 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct sk_buff *skb = NULL;
struct ieee80211_tx_info *info = NULL;
- int tid; /* should be int */
+ int tid;
if (!rtlpriv->rtlhal.earlymode_enable)
return;
@@ -1538,7 +1538,7 @@ static int rtl_pci_start(struct ieee80211_hw *hw)
rtl_init_rx_config(hw);
- /*should after adapter start and interrupt enable. */
+ /*should be after adapter start and interrupt enable. */
set_hal_start(rtlhal);
RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
@@ -1559,7 +1559,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
u8 RFInProgressTimeOut = 0;
/*
- *should before disable interrrupt&adapter
+ *should be before disable interrupt&adapter
*and will do it immediately.
*/
set_hal_stop(rtlhal);
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 57a6d19eba4c..a6f762188bc3 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
* @dev: instance of PCI owned by the driver that's asking
* @mask: number of address bits this PCI device can handle
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static int sba_dma_supported( struct device *dev, u64 mask)
{
@@ -680,7 +680,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
return(0);
}
- /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit
+ /* Documentation/DMA-API-HOWTO.txt tells drivers to try 64-bit
* first, then fall back to 32-bit if that fails.
* We are just "encouraging" 32-bit DMA masks here since we can
* never allow IOMMU bypass unless we add special support for ZX1.
@@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
* @size: number of bytes to map in driver buffer.
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static dma_addr_t
sba_map_single(struct device *dev, void *addr, size_t size,
@@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size,
* @size: number of bytes mapped in driver buffer.
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
@@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
* @size: number of bytes mapped in driver buffer.
* @dma_handle: IOVA of new buffer.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void *sba_alloc_consistent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
@@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size,
* @vaddr: virtual address IOVA of "consistent" buffer.
* @dma_handler: IO virtual address of "consistent" buffer.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
@@ -927,7 +927,7 @@ int dump_run_sg = 0;
* @nents: number of entries in list
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static int
sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
@@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
* @nents: number of entries in list
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 1e88d4785321..10cf2500522b 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -31,9 +31,6 @@ config ACER_WMI
wireless radio and bluetooth control, and on some laptops,
exposes the mail LED and LCD backlight.
- For more information about this driver see
- <file:Documentation/laptops/acer-wmi.txt>
-
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
@@ -164,7 +161,7 @@ config HP_ACCEL
Support for a led indicating disk protection will be provided as
hp::hddprotect. For more information on the feature, refer to
- Documentation/hwmon/lis3lv02d.
+ Documentation/misc-devices/lis3lv02d.
To compile this driver as a module, choose M here: the module will
be called hp_accel.
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 7bd829f247eb..7b828680b21d 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -4007,7 +4007,7 @@ static void bluetooth_shutdown(void)
pr_notice("failed to save bluetooth state to NVRAM\n");
else
vdbg_printk(TPACPI_DBG_RFKILL,
- "bluestooth state saved to NVRAM\n");
+ "bluetooth state saved to NVRAM\n");
}
static void bluetooth_exit(void)
diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c
index 76058a5166ed..08c66035dd19 100644
--- a/drivers/s390/cio/blacklist.c
+++ b/drivers/s390/cio/blacklist.c
@@ -335,10 +335,9 @@ cio_ignore_write(struct file *file, const char __user *user_buf,
return -EINVAL;
if (user_len > 65536)
user_len = 65536;
- buf = vmalloc (user_len + 1); /* maybe better use the stack? */
+ buf = vzalloc(user_len + 1); /* maybe better use the stack? */
if (buf == NULL)
return -ENOMEM;
- memset(buf, 0, user_len + 1);
if (strncpy_from_user (buf, user_buf, user_len) < 0) {
rc = -EFAULT;
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index c20494660603..957595a7a45c 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -37,7 +37,6 @@
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
-#include <linux/version.h>
#include <linux/completion.h>
#include <linux/time.h>
#include <linux/interrupt.h>
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 5e6620f8dabc..6739069477de 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -31,8 +31,7 @@ config AIC79XX_CMDS_PER_DEVICE
on some devices. The upper bound is 253. 0 disables tagged queueing.
Per device tag depth can be controlled via the kernel command line
- "tag_info" option. See drivers/scsi/aic7xxx/README.aic79xx
- for details.
+ "tag_info" option. See Documentation/scsi/aic79xx.txt for details.
config AIC79XX_RESET_DELAY_MS
int "Initial bus reset delay in milli-seconds"
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 88da670a7915..55ac55ee6068 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -36,8 +36,7 @@ config AIC7XXX_CMDS_PER_DEVICE
on some devices. The upper bound is 253. 0 disables tagged queueing.
Per device tag depth can be controlled via the kernel command line
- "tag_info" option. See drivers/scsi/aic7xxx/README.aic7xxx
- for details.
+ "tag_info" option. See Documentation/scsi/aic7xxx.txt for details.
config AIC7XXX_RESET_DELAY_MS
int "Initial bus reset delay in milli-seconds"
diff --git a/drivers/scsi/aic94xx/aic94xx_dump.c b/drivers/scsi/aic94xx/aic94xx_dump.c
index 67eeba3bdb06..a16a77c8b9cf 100644
--- a/drivers/scsi/aic94xx/aic94xx_dump.c
+++ b/drivers/scsi/aic94xx/aic94xx_dump.c
@@ -29,7 +29,7 @@
*
*/
-#include "linux/pci.h"
+#include <linux/pci.h>
#include "aic94xx.h"
#include "aic94xx_reg.h"
#include "aic94xx_reg_def.h"
diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h
index bda999ad9f52..5e19a5f820ec 100644
--- a/drivers/scsi/bfa/bfad_drv.h
+++ b/drivers/scsi/bfa/bfad_drv.h
@@ -27,7 +27,6 @@
#define __BFAD_DRV_H__
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
index f58644850333..1242c7c04a01 100644
--- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
+++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
@@ -14,7 +14,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index ae13c4993aa3..31c79bde6976 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -13,7 +13,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 5d0e9a24ae94..34c8d82b7423 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -18,7 +18,6 @@
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/spinlock.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 430fc8ff014a..09e61134037f 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -708,7 +708,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code)
__func__,
event_code);
- return SCI_FAILURE;;
+ return SCI_FAILURE;
}
return SCI_SUCCESS;
case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 2e6619eff3ea..8883ca36f932 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -67,7 +67,7 @@
*
* NEC MegaRAID PCI Express ROMB 1000 0408 1033 8287
*
- * For history of changes, see Documentation/ChangeLog.megaraid
+ * For history of changes, see Documentation/scsi/ChangeLog.megaraid
*/
#include <linux/slab.h>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 83035bd1c489..6825772cfd6a 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -42,7 +42,6 @@
* USA.
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 6861244249a3..2b1101076cfe 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -41,7 +41,6 @@
* USA.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 38ed0260959d..246d5fbc6e5a 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -42,7 +42,6 @@
* USA.
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 6abd2fcc43e2..5202de3f3d3f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -41,7 +41,6 @@
* USA.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index 44d7885a4a1d..44b474513223 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -43,7 +43,6 @@
#include <scsi/scsi.h>
#include <scsi/scsi_tcq.h>
#include <scsi/sas_ata.h>
-#include <linux/version.h>
#include "mv_defs.h"
#define DRV_NAME "mvsas"
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index d079f9a3c6b3..b86db84d6f32 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -39,7 +39,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/hdreg.h>
-#include <linux/version.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <asm/irq.h>
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index f920baf3ff24..ca496c7474e3 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -24,7 +24,6 @@
#ifndef _PMCRAID_H
#define _PMCRAID_H
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/completion.h>
#include <linux/list.h>
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 909ed9ed24c0..441a1c5b8974 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -50,6 +50,7 @@ static int sg_version_num = 30534; /* 2 digits for each component */
#include <linux/delay.h>
#include <linux/blktrace_api.h>
#include <linux/mutex.h>
+#include <linux/ratelimit.h>
#include "scsi.h"
#include <scsi/scsi_dbg.h>
@@ -626,14 +627,15 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
*/
if (hp->dxfer_direction == SG_DXFER_TO_FROM_DEV) {
static char cmd[TASK_COMM_LEN];
- if (strcmp(current->comm, cmd) && printk_ratelimit()) {
- printk(KERN_WARNING
- "sg_write: data in/out %d/%d bytes for SCSI command 0x%x--"
- "guessing data in;\n "
- "program %s not setting count and/or reply_len properly\n",
- old_hdr.reply_len - (int)SZ_SG_HEADER,
- input_size, (unsigned int) cmnd[0],
- current->comm);
+ if (strcmp(current->comm, cmd)) {
+ printk_ratelimited(KERN_WARNING
+ "sg_write: data in/out %d/%d bytes "
+ "for SCSI command 0x%x-- guessing "
+ "data in;\n program %s not setting "
+ "count and/or reply_len properly\n",
+ old_hdr.reply_len - (int)SZ_SG_HEADER,
+ input_size, (unsigned int) cmnd[0],
+ current->comm);
strcpy(cmd, current->comm);
}
}
diff --git a/drivers/staging/cxt1e1/Kconfig b/drivers/staging/cxt1e1/Kconfig
index 73430ef6ae2b..947f42a65c59 100644
--- a/drivers/staging/cxt1e1/Kconfig
+++ b/drivers/staging/cxt1e1/Kconfig
@@ -6,8 +6,7 @@ config CXT1E1
channelized stream WAN adapter card which contains a HDLC/Transparent
mode controller.
- If you want to compile this driver as a module
- say M here and read <file:Documentation/modules.txt>.
+ If you want to compile this driver as a module say M here.
The module will be called 'cxt1e1'.
If unsure, say N.
diff --git a/drivers/staging/iio/addac/adt7316-i2c.c b/drivers/staging/iio/addac/adt7316-i2c.c
index 52d1ea349635..1c86cf11ab94 100644
--- a/drivers/staging/iio/addac/adt7316-i2c.c
+++ b/drivers/staging/iio/addac/adt7316-i2c.c
@@ -109,7 +109,7 @@ static int __devinit adt7316_i2c_probe(struct i2c_client *client,
static int __devexit adt7316_i2c_remove(struct i2c_client *client)
{
- return adt7316_remove(&client->dev);;
+ return adt7316_remove(&client->dev);
}
static const struct i2c_device_id adt7316_i2c_id[] = {
diff --git a/drivers/staging/iio/dds/ad9832.c b/drivers/staging/iio/dds/ad9832.c
index e3e61a469bb8..6f0efe6580e7 100644
--- a/drivers/staging/iio/dds/ad9832.c
+++ b/drivers/staging/iio/dds/ad9832.c
@@ -52,7 +52,7 @@ static int ad9832_write_frequency(struct ad9832_state *st,
((addr - 3) << ADD_SHIFT) |
((regval >> 0) & 0xFF));
- return spi_sync(st->spi, &st->freq_msg);;
+ return spi_sync(st->spi, &st->freq_msg);
}
static int ad9832_write_phase(struct ad9832_state *st,
diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c
index 4d087ac11067..426cd4bf6a9a 100644
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -504,7 +504,7 @@ static int iscsi_target_do_authentication(
break;
case 1:
pr_debug("iSCSI security negotiation"
- " completed sucessfully.\n");
+ " completed successfully.\n");
login->auth_complete = 1;
if ((login_req->flags & ISCSI_FLAG_LOGIN_NEXT_STAGE1) &&
(login_req->flags & ISCSI_FLAG_LOGIN_TRANSIT)) {
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index 162b736c7342..49fd0a9b0a56 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -593,7 +593,7 @@ int core_tpg_set_initiator_node_queue_depth(
if (init_sess)
tpg->se_tpg_tfo->close_session(init_sess);
- pr_debug("Successfuly changed queue depth to: %d for Initiator"
+ pr_debug("Successfully changed queue depth to: %d for Initiator"
" Node: %s on %s Target Portal Group: %u\n", queue_depth,
initiatorname, tpg->se_tpg_tfo->get_fabric_name(),
tpg->se_tpg_tfo->tpg_get_tag(tpg));
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index bd7cc0527999..f462fa5f937c 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -62,7 +62,7 @@ config VT_CONSOLE
config HW_CONSOLE
bool
- depends on VT && !S390 && !UML
+ depends on VT && !UML
default y
config VT_HW_CONSOLE_BINDING
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 23bc743f2a22..492c14d63e99 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
* 1 word. If SPI master controller doesn't support sclk frequency change,
* then the char need be sent out one by one with some delay
*
- * 2. Currently only RX available interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrupt is used, no need for waiting TXE
* interrupt for a low speed UART device
*/
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index a06e2c27b435..ff4d40d77c30 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2969,7 +2969,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
handle_port_change(dev);
}
- /* suspend interrrupt */
+ /* suspend interrupt */
if (irq_sts & STS_SLI) {
dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
handle_bus_suspend(dev);
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index ce1ac2bcb314..0b3b8d0462db 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -335,7 +335,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
} else {
/* Write dQH next pointer and terminate bit to 0 */
dqh->next_dtd_ptr = req->head->td_dma
- & EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
+ & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
dqh->size_ioc_int_sts = 0;
/* Ensure that updates to the QH will occur before priming. */
@@ -376,7 +376,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
}
}
done:
- return retval;;
+ return retval;
}
static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3dd40b4e675c..a218a4de5dc9 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2481,7 +2481,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED);
/* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
- * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and
+ * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and
* both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
* only indicates a change in the reset state).
*/
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index 5b7919460fd2..81971fbc7ea5 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -56,6 +56,7 @@ struct uvc_event
#include <linux/usb.h> /* For usb_endpoint_* */
#include <linux/usb/gadget.h>
#include <linux/videodev2.h>
+#include <linux/version.h>
#include <media/v4l2-fh.h>
#include "uvc_queue.h"
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index 52f8f9e513af..cfb58384394d 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -16,7 +16,6 @@
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/mutex.h>
-#include <linux/version.h>
#include <linux/videodev2.h>
#include <linux/vmalloc.h>
#include <linux/wait.h>
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index e81820370d6f..fe8d14cac436 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -704,7 +704,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
* most these gadgets, end of is signified either by a short packet,
* or filling the last byte of the buffer. (Sending extra data in
* that last pckate should trigger an overflow fault.) But in mode 1,
- * we don't get DMA completion interrrupt for short packets.
+ * we don't get DMA completion interrupt for short packets.
*
* Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
* to get endpoint interrupt on every DMA req, but that didn't seem
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 86fbba6336c9..e92cbefc0f88 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -227,7 +227,7 @@
* - All sleeps use a timeout of DIGI_RETRY_TIMEOUT before looping to
* recheck the condition they are sleeping on. This is defensive,
* in case a wake up is lost.
-* - Following Documentation/DocBook/kernel-locking.pdf no spin locks
+* - Following Documentation/DocBook/kernel-locking.tmpl no spin locks
* are held when calling copy_to/from_user or printk.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 40abedbc5943..3524a105d042 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -2006,7 +2006,6 @@ static int mos7720_ioctl(struct tty_struct *tty,
dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return get_lsr_info(tty, mos7720_port,
(unsigned int __user *)arg);
- return 0;
/* FIXME: These should be using the mode methods */
case TIOCMBIS:
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 7b50aa122752..c72abd524983 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2263,7 +2263,6 @@ static int mos7840_ioctl(struct tty_struct *tty,
case TIOCSERGETLSR:
dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return mos7840_get_lsr_info(tty, argp);
- return 0;
case TIOCGSERIAL:
dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 34adc4b42ceb..6fd13068481b 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -25,7 +25,6 @@
#include <linux/kthread.h>
#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h
index 157485c862c0..a7494bf10081 100644
--- a/drivers/uwb/uwb-internal.h
+++ b/drivers/uwb/uwb-internal.h
@@ -28,7 +28,6 @@
#ifndef __UWB_INTERNAL_H__
#define __UWB_INTERNAL_H__
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/uwb.h>
diff --git a/drivers/video/igafb.c b/drivers/video/igafb.c
index d885c770eb84..2d97752f79a5 100644
--- a/drivers/video/igafb.c
+++ b/drivers/video/igafb.c
@@ -428,7 +428,7 @@ static int __init igafb_init(void)
*
* IGS2000 has its I/O memory mapped and we want
* to generate memory cycles on PCI, e.g. do ioremap(),
- * then readb/writeb() as in Documentation/IO-mapping.txt.
+ * then readb/writeb() as in Documentation/io-mapping.txt.
*
* IGS1682 is more traditional, it responds to PCI I/O
* cycles, so we want to access it with inb()/outb().
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index e97b0499bd0d..97b8184614ae 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -40,7 +40,7 @@
* mknod /dev/watchdog c 10 130
*
* For an example userspace keep-alive daemon, see:
- * Documentation/watchdog/watchdog.txt
+ * Documentation/watchdog/wdt.txt
*/
#include <linux/module.h>
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 71beb0201970..62abf9fd6ff0 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2877,9 +2877,9 @@ cleanup_volume_info_contents(struct smb_vol *volume_info)
{
kfree(volume_info->username);
kzfree(volume_info->password);
- kfree(volume_info->UNC);
if (volume_info->UNCip != volume_info->UNC + 2)
kfree(volume_info->UNCip);
+ kfree(volume_info->UNC);
kfree(volume_info->domainname);
kfree(volume_info->iocharset);
kfree(volume_info->prepath);
diff --git a/fs/coda/coda_linux.h b/fs/coda/coda_linux.h
index 44e17e9c21ae..cc0ea9fe5ecf 100644
--- a/fs/coda/coda_linux.h
+++ b/fs/coda/coda_linux.h
@@ -59,12 +59,11 @@ void coda_sysctl_clean(void);
#define CODA_ALLOC(ptr, cast, size) do { \
if (size < PAGE_SIZE) \
- ptr = kmalloc((unsigned long) size, GFP_KERNEL); \
+ ptr = kzalloc((unsigned long) size, GFP_KERNEL); \
else \
- ptr = (cast)vmalloc((unsigned long) size); \
+ ptr = (cast)vzalloc((unsigned long) size); \
if (!ptr) \
printk("kernel malloc returns 0 at %s:%d\n", __FILE__, __LINE__); \
- else memset( ptr, 0, size ); \
} while (0)
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index c83f4768eeaa..ca418aaf6352 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -23,7 +23,8 @@
*
* configfs Copyright (C) 2005 Oracle. All rights reserved.
*
- * Please see Documentation/filesystems/configfs.txt for more information.
+ * Please see Documentation/filesystems/configfs/configfs.txt for more
+ * information.
*/
#undef DEBUG
diff --git a/fs/configfs/item.c b/fs/configfs/item.c
index 76dc4c3e5d51..50cee7f9110b 100644
--- a/fs/configfs/item.c
+++ b/fs/configfs/item.c
@@ -23,7 +23,7 @@
*
* configfs Copyright (C) 2005 Oracle. All rights reserved.
*
- * Please see the file Documentation/filesystems/configfs.txt for
+ * Please see the file Documentation/filesystems/configfs/configfs.txt for
* critical information about using the config_item interface.
*/
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index fe047d966dc5..9026fc91fe3b 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -700,7 +700,7 @@ static const struct file_operations eventpoll_fops = {
.llseek = noop_llseek,
};
-/* Fast test to see if the file is an evenpoll file */
+/* Fast test to see if the file is an eventpoll file */
static inline int is_file_epoll(struct file *f)
{
return f->f_op == &eventpoll_fops;
diff --git a/fs/locks.c b/fs/locks.c
index 703f545097de..96b33989147d 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -60,7 +60,7 @@
*
* Initial implementation of mandatory locks. SunOS turned out to be
* a rotten model, so I implemented the "obvious" semantics.
- * See 'Documentation/mandatory.txt' for details.
+ * See 'Documentation/filesystems/mandatory-locking.txt' for details.
* Andy Walker (andy@lysaker.kvaerner.no), April 06, 1996.
*
* Don't allow mandatory locks on mmap()'ed files. Added simple functions to
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index a159ba5a35e7..eb711060a6f2 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -291,14 +291,13 @@ int reiserfs_allocate_list_bitmaps(struct super_block *sb,
for (i = 0; i < JOURNAL_NUM_BITMAPS; i++) {
jb = jb_array + i;
jb->journal_list = NULL;
- jb->bitmaps = vmalloc(mem);
+ jb->bitmaps = vzalloc(mem);
if (!jb->bitmaps) {
reiserfs_warning(sb, "clm-2000", "unable to "
"allocate bitmaps for journal lists");
failed = 1;
break;
}
- memset(jb->bitmaps, 0, mem);
}
if (failed) {
free_list_bitmaps(sb, jb_array);
@@ -353,11 +352,10 @@ static struct reiserfs_journal_cnode *allocate_cnodes(int num_cnodes)
if (num_cnodes <= 0) {
return NULL;
}
- head = vmalloc(num_cnodes * sizeof(struct reiserfs_journal_cnode));
+ head = vzalloc(num_cnodes * sizeof(struct reiserfs_journal_cnode));
if (!head) {
return NULL;
}
- memset(head, 0, num_cnodes * sizeof(struct reiserfs_journal_cnode));
head[0].prev = NULL;
head[0].next = head + 1;
for (i = 1; i < num_cnodes; i++) {
@@ -2685,14 +2683,13 @@ int journal_init(struct super_block *sb, const char *j_dev_name,
* dependency inversion warnings.
*/
reiserfs_write_unlock(sb);
- journal = SB_JOURNAL(sb) = vmalloc(sizeof(struct reiserfs_journal));
+ journal = SB_JOURNAL(sb) = vzalloc(sizeof(struct reiserfs_journal));
if (!journal) {
reiserfs_warning(sb, "journal-1256",
"unable to get memory for journal structure");
reiserfs_write_lock(sb);
return 1;
}
- memset(journal, 0, sizeof(struct reiserfs_journal));
INIT_LIST_HEAD(&journal->j_bitmap_nodes);
INIT_LIST_HEAD(&journal->j_prealloc_list);
INIT_LIST_HEAD(&journal->j_working_list);
diff --git a/fs/reiserfs/resize.c b/fs/reiserfs/resize.c
index b6b9b1fe33b0..7483279b482d 100644
--- a/fs/reiserfs/resize.c
+++ b/fs/reiserfs/resize.c
@@ -111,15 +111,13 @@ int reiserfs_resize(struct super_block *s, unsigned long block_count_new)
/* allocate additional bitmap blocks, reallocate array of bitmap
* block pointers */
bitmap =
- vmalloc(sizeof(struct reiserfs_bitmap_info) * bmap_nr_new);
+ vzalloc(sizeof(struct reiserfs_bitmap_info) * bmap_nr_new);
if (!bitmap) {
/* Journal bitmaps are still supersized, but the memory isn't
* leaked, so I guess it's ok */
printk("reiserfs_resize: unable to allocate memory.\n");
return -ENOMEM;
}
- memset(bitmap, 0,
- sizeof(struct reiserfs_bitmap_info) * bmap_nr_new);
for (i = 0; i < bmap_nr; i++)
bitmap[i] = old_bitmap[i];
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
index 1360d4f88f41..048b59d5b2f0 100644
--- a/fs/squashfs/Kconfig
+++ b/fs/squashfs/Kconfig
@@ -19,9 +19,9 @@ config SQUASHFS
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called squashfs. Note that the root file system (the one
- containing the directory /) cannot be compiled as a module.
+ say M here. The module will be called squashfs. Note that the root
+ file system (the one containing the directory /) cannot be compiled
+ as a module.
If unsure, say N.
diff --git a/fs/xfs/kmem.h b/fs/xfs/kmem.h
index f7c8f7a9ea6d..292eff198030 100644
--- a/fs/xfs/kmem.h
+++ b/fs/xfs/kmem.h
@@ -61,12 +61,7 @@ extern void kmem_free(const void *);
static inline void *kmem_zalloc_large(size_t size)
{
- void *ptr;
-
- ptr = vmalloc(size);
- if (ptr)
- memset(ptr, 0, size);
- return ptr;
+ return vzalloc(size);
}
static inline void kmem_free_large(void *ptr)
{
diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h
index d7adf151d335..ca768ae729b4 100644
--- a/include/linux/ceph/messenger.h
+++ b/include/linux/ceph/messenger.h
@@ -6,7 +6,6 @@
#include <linux/net.h>
#include <linux/radix-tree.h>
#include <linux/uio.h>
-#include <linux/version.h>
#include <linux/workqueue.h>
#include "types.h"
diff --git a/include/linux/drbd_tag_magic.h b/include/linux/drbd_tag_magic.h
index 069543190516..81f52f2c5724 100644
--- a/include/linux/drbd_tag_magic.h
+++ b/include/linux/drbd_tag_magic.h
@@ -28,7 +28,7 @@ enum packet_types {
#define NL_STRING(pn, pr, member, len) \
unsigned char member[len]; int member ## _len; \
int tag_and_len ## member;
-#include "linux/drbd_nl.h"
+#include <linux/drbd_nl.h>
/* declare tag-list-sizes */
static const int tag_list_sizes[] = {
diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h
index 8cdcc2a199ad..c81ed2ac16bd 100644
--- a/include/linux/io-mapping.h
+++ b/include/linux/io-mapping.h
@@ -27,7 +27,7 @@
* The io_mapping mechanism provides an abstraction for mapping
* individual pages from an io device to the CPU in an efficient fashion.
*
- * See Documentation/io_mapping.txt
+ * See Documentation/io-mapping.txt
*/
#ifdef CONFIG_HAVE_ATOMIC_IOMAP
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
index 44cd663c53b6..4ccf95d681b4 100644
--- a/include/linux/isdn.h
+++ b/include/linux/isdn.h
@@ -68,7 +68,7 @@
#define ISDN_NET_ENCAP_SYNCPPP 4
#define ISDN_NET_ENCAP_UIHDLC 5
#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */
-#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt*/
+#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */
#define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE
/* Facility which currently uses an ISDN-channel */
diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
index abd286215279..88734e871e3a 100644
--- a/include/linux/platform_data/ntc_thermistor.h
+++ b/include/linux/platform_data/ntc_thermistor.h
@@ -36,7 +36,7 @@ struct ntc_thermistor_platform_data {
* read_uV()
*
* How to setup pullup_ohm, pulldown_ohm, and connect is
- * described at Documentation/hwmon/ntc
+ * described at Documentation/hwmon/ntc_thermistor
*
* pullup/down_ohm: 0 for infinite / not-connected
*/
diff --git a/include/media/pwc-ioctl.h b/include/media/pwc-ioctl.h
index 0f19779c4634..1ed1e616fe33 100644
--- a/include/media/pwc-ioctl.h
+++ b/include/media/pwc-ioctl.h
@@ -53,7 +53,6 @@
*/
#include <linux/types.h>
-#include <linux/version.h>
/* Enumeration of image sizes */
#define PSZ_SQCIF 0x00
diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h
index 1c647e8148c4..d8fb6012c10d 100644
--- a/include/media/videobuf-dma-sg.h
+++ b/include/media/videobuf-dma-sg.h
@@ -34,7 +34,7 @@
* does memory allocation too using vmalloc_32().
*
* videobuf_dma_*()
- * see Documentation/PCI/PCI-DMA-mapping.txt, these functions to
+ * see Documentation/DMA-API-HOWTO.txt, these functions to
* basically the same. The map function does also build a
* scatterlist for the buffer (and unmap frees it ...)
*
diff --git a/include/target/configfs_macros.h b/include/target/configfs_macros.h
index 7fe74608b437..a0fc85bbe2da 100644
--- a/include/target/configfs_macros.h
+++ b/include/target/configfs_macros.h
@@ -30,8 +30,8 @@
* Added CONFIGFS_EATTR() macros from original configfs.h macros
* Copright (C) 2008-2009 Nicholas A. Bellinger <nab@linux-iscsi.org>
*
- * Please read Documentation/filesystems/configfs.txt before using the
- * configfs interface, ESPECIALLY the parts about reference counts and
+ * Please read Documentation/filesystems/configfs/configfs.txt before using
+ * the configfs interface, ESPECIALLY the parts about reference counts and
* item destructors.
*/
diff --git a/kernel/async.c b/kernel/async.c
index d5fe7af0de2e..4c2843c0043e 100644
--- a/kernel/async.c
+++ b/kernel/async.c
@@ -120,7 +120,7 @@ static void async_run_entry_fn(struct work_struct *work)
struct async_entry *entry =
container_of(work, struct async_entry, work);
unsigned long flags;
- ktime_t calltime, delta, rettime;
+ ktime_t uninitialized_var(calltime), delta, rettime;
/* 1) move self to the running queue */
spin_lock_irqsave(&async_lock, flags);
@@ -269,7 +269,7 @@ EXPORT_SYMBOL_GPL(async_synchronize_full_domain);
void async_synchronize_cookie_domain(async_cookie_t cookie,
struct list_head *running)
{
- ktime_t starttime, delta, endtime;
+ ktime_t uninitialized_var(starttime), delta, endtime;
if (initcall_debug && system_state == SYSTEM_BOOTING) {
printk(KERN_DEBUG "async_waiting @ %i\n", task_pid_nr(current));
diff --git a/kernel/futex.c b/kernel/futex.c
index 11cbe052b2e8..1511dff0cfd6 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -854,7 +854,7 @@ static int wake_futex_pi(u32 __user *uaddr, u32 uval, struct futex_q *this)
{
struct task_struct *new_owner;
struct futex_pi_state *pi_state = this->pi_state;
- u32 curval, newval;
+ u32 uninitialized_var(curval), newval;
if (!pi_state)
return -EINVAL;
@@ -916,7 +916,7 @@ static int wake_futex_pi(u32 __user *uaddr, u32 uval, struct futex_q *this)
static int unlock_futex_pi(u32 __user *uaddr, u32 uval)
{
- u32 oldval;
+ u32 uninitialized_var(oldval);
/*
* There is no waiter, so we unlock the futex. The owner died
@@ -1576,7 +1576,7 @@ static int fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q,
u32 newtid = task_pid_vnr(newowner) | FUTEX_WAITERS;
struct futex_pi_state *pi_state = q->pi_state;
struct task_struct *oldowner = pi_state->owner;
- u32 uval, curval, newval;
+ u32 uval, uninitialized_var(curval), newval;
int ret;
/* Owner died? */
@@ -1793,7 +1793,7 @@ static void futex_wait_queue_me(struct futex_hash_bucket *hb, struct futex_q *q,
*
* Returns:
* 0 - uaddr contains val and hb has been locked
- * <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlcoked
+ * <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlocked
*/
static int futex_wait_setup(u32 __user *uaddr, u32 val, unsigned int flags,
struct futex_q *q, struct futex_hash_bucket **hb)
@@ -2481,7 +2481,7 @@ err_unlock:
*/
int handle_futex_death(u32 __user *uaddr, struct task_struct *curr, int pi)
{
- u32 uval, nval, mval;
+ u32 uval, uninitialized_var(nval), mval;
retry:
if (get_user(uval, uaddr))
diff --git a/kernel/sched.c b/kernel/sched.c
index b50b0f0c9aa9..8aa00803c1ec 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1739,7 +1739,7 @@ static inline void __set_task_cpu(struct task_struct *p, unsigned int cpu)
#ifdef CONFIG_SMP
/*
* After ->cpu is set up to a new value, task_rq_lock(p, ...) can be
- * successfuly executed on another CPU. We must ensure that updates of
+ * successfully executed on another CPU. We must ensure that updates of
* per-task data have been completed by this moment.
*/
smp_wmb();
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 103c171ce605..75330bd87565 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -117,31 +117,31 @@ config DEBUG_SECTION_MISMATCH
help
The section mismatch analysis checks if there are illegal
references from one section to another section.
- Linux will during link or during runtime drop some sections
- and any use of code/data previously in these sections will
+ During linktime or runtime, some sections are dropped;
+ any use of code/data previously in these sections would
most likely result in an oops.
- In the code functions and variables are annotated with
- __init, __devinit etc. (see full list in include/linux/init.h)
+ In the code, functions and variables are annotated with
+ __init, __devinit, etc. (see the full list in include/linux/init.h),
which results in the code/data being placed in specific sections.
- The section mismatch analysis is always done after a full
- kernel build but enabling this option will in addition
- do the following:
- - Add the option -fno-inline-functions-called-once to gcc
- When inlining a function annotated __init in a non-init
- function we would lose the section information and thus
+ The section mismatch analysis is always performed after a full
+ kernel build, and enabling this option causes the following
+ additional steps to occur:
+ - Add the option -fno-inline-functions-called-once to gcc commands.
+ When inlining a function annotated with __init in a non-init
+ function, we would lose the section information and thus
the analysis would not catch the illegal reference.
- This option tells gcc to inline less but will also
- result in a larger kernel.
- - Run the section mismatch analysis for each module/built-in.o
- When we run the section mismatch analysis on vmlinux.o we
+ This option tells gcc to inline less (but it does result in
+ a larger kernel).
+ - Run the section mismatch analysis for each module/built-in.o file.
+ When we run the section mismatch analysis on vmlinux.o, we
lose valueble information about where the mismatch was
introduced.
Running the analysis for each module/built-in.o file
- will tell where the mismatch happens much closer to the
- source. The drawback is that we will report the same
- mismatch at least twice.
- - Enable verbose reporting from modpost to help solving
- the section mismatches reported.
+ tells where the mismatch happens much closer to the
+ source. The drawback is that the same mismatch is
+ reported at least twice.
+ - Enable verbose reporting from modpost in order to help resolve
+ the section mismatches that are reported.
config DEBUG_KERNEL
bool "Kernel debugging"
@@ -835,7 +835,7 @@ config DEBUG_CREDENTIALS
#
# Select this config option from the architecture Kconfig, if it
-# it is preferred to always offer frame pointers as a config
+# is preferred to always offer frame pointers as a config
# option on the architecture (regardless of KERNEL_DEBUG):
#
config ARCH_WANT_FRAME_POINTERS
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 75ca78f3a8c9..79fc20b65e74 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -14,7 +14,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kallsyms.h>
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/proc_fs.h>
diff --git a/lib/idr.c b/lib/idr.c
index db040ce3fa73..5acf9bb10968 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -860,7 +860,7 @@ EXPORT_SYMBOL(ida_get_new_above);
* and go back to the idr_pre_get() call. If the idr is full, it will
* return %-ENOSPC.
*
- * @id returns a value in the range %0 ... %0x7fffffff.
+ * @p_id returns a value in the range %0 ... %0x7fffffff.
*/
int ida_get_new(struct ida *ida, int *p_id)
{
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 39d216d535ea..6bdc67dbbc28 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -513,11 +513,10 @@ int swap_cgroup_swapon(int type, unsigned long max_pages)
length = DIV_ROUND_UP(max_pages, SC_PER_PAGE);
array_size = length * sizeof(void *);
- array = vmalloc(array_size);
+ array = vzalloc(array_size);
if (!array)
goto nomem;
- memset(array, 0, array_size);
ctrl = &swap_cgroup_ctrl[type];
mutex_lock(&swap_cgroup_mutex);
ctrl->length = length;
diff --git a/mm/vmscan.c b/mm/vmscan.c
index b55699cd9067..9fdfce7ba403 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1416,7 +1416,7 @@ static inline bool should_reclaim_stall(unsigned long nr_taken,
if (sc->reclaim_mode & RECLAIM_MODE_SINGLE)
return false;
- /* If we have relaimed everything on the isolated list, no stall */
+ /* If we have reclaimed everything on the isolated list, no stall */
if (nr_freed == nr_taken)
return false;
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index 32bff6d86cb2..8260b13d93c9 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -505,7 +505,7 @@ config NETFILTER_XT_TARGET_LED
echo netfilter-ssh > /sys/class/leds/<ledname>/trigger
For more information on the LEDs available on your system, see
- Documentation/leds-class.txt
+ Documentation/leds/leds-class.txt
config NETFILTER_XT_TARGET_MARK
tristate '"MARK" target support'
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index b0869fe3633b..71441b934ffd 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -776,12 +776,11 @@ static int xt_jumpstack_alloc(struct xt_table_info *i)
size = sizeof(void **) * nr_cpu_ids;
if (size > PAGE_SIZE)
- i->jumpstack = vmalloc(size);
+ i->jumpstack = vzalloc(size);
else
- i->jumpstack = kmalloc(size, GFP_KERNEL);
+ i->jumpstack = kzalloc(size, GFP_KERNEL);
if (i->jumpstack == NULL)
return -ENOMEM;
- memset(i->jumpstack, 0, size);
i->stacksize *= xt_jumpstack_multiplier;
size = sizeof(void *) * i->stacksize;
diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c
index cd67026be2d5..51c868923f64 100644
--- a/net/rds/ib_cm.c
+++ b/net/rds/ib_cm.c
@@ -375,23 +375,21 @@ static int rds_ib_setup_qp(struct rds_connection *conn)
goto out;
}
- ic->i_sends = vmalloc_node(ic->i_send_ring.w_nr * sizeof(struct rds_ib_send_work),
+ ic->i_sends = vzalloc_node(ic->i_send_ring.w_nr * sizeof(struct rds_ib_send_work),
ibdev_to_node(dev));
if (!ic->i_sends) {
ret = -ENOMEM;
rdsdebug("send allocation failed\n");
goto out;
}
- memset(ic->i_sends, 0, ic->i_send_ring.w_nr * sizeof(struct rds_ib_send_work));
- ic->i_recvs = vmalloc_node(ic->i_recv_ring.w_nr * sizeof(struct rds_ib_recv_work),
+ ic->i_recvs = vzalloc_node(ic->i_recv_ring.w_nr * sizeof(struct rds_ib_recv_work),
ibdev_to_node(dev));
if (!ic->i_recvs) {
ret = -ENOMEM;
rdsdebug("recv allocation failed\n");
goto out;
}
- memset(ic->i_recvs, 0, ic->i_recv_ring.w_nr * sizeof(struct rds_ib_recv_work));
rds_ib_recv_init_ack(ic);
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 3dfc47134e51..0b3e35c9ef08 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2932,11 +2932,11 @@ sub process {
}
}
if ($level == 0 && $block =~ /^\s*\{/ && !$allowed) {
- my $herectx = $here . "\n";;
+ my $herectx = $here . "\n";
my $cnt = statement_rawlines($block);
for (my $n = 0; $n < $cnt; $n++) {
- $herectx .= raw_line($linenr, $n) . "\n";;
+ $herectx .= raw_line($linenr, $n) . "\n";
}
WARN("BRACES",
diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c
index 16bd9c03679b..691569238435 100644
--- a/sound/core/memalloc.c
+++ b/sound/core/memalloc.c
@@ -176,7 +176,7 @@ static void snd_free_dev_pages(struct device *dev, size_t size, void *ptr,
* Calls the memory-allocator function for the corresponding
* buffer type.
*
- * Returns zero if the buffer with the given size is allocated successfuly,
+ * Returns zero if the buffer with the given size is allocated successfully,
* other a negative value at error.
*/
int snd_dma_alloc_pages(int type, struct device *device, size_t size,
@@ -230,7 +230,7 @@ int snd_dma_alloc_pages(int type, struct device *device, size_t size,
* tries to allocate again. The size actually allocated is stored in
* res_size argument.
*
- * Returns zero if the buffer with the given size is allocated successfuly,
+ * Returns zero if the buffer with the given size is allocated successfully,
* other a negative value at error.
*/
int snd_dma_alloc_pages_fallback(int type, struct device *device, size_t size,
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 6c93e051f9ae..6c9e8e8f45f8 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -432,9 +432,7 @@ config SOUND_SB
ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and
for cards based on ESS chips (read
<file:Documentation/sound/oss/ESS1868> and
- <file:Documentation/sound/oss/ESS>). If you have an SB AWE 32 or SB AWE
- 64, say Y here and also to "AWE32 synth" below and read
- <file:Documentation/sound/oss/INSTALL.awe>. If you have an IBM Mwave
+ <file:Documentation/sound/oss/ESS>). If you have an IBM Mwave
card, say Y here and read <file:Documentation/sound/oss/mwave>.
If you compile the driver into the kernel and don't want to use
diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig
index 6bbf001f6591..9e11a14d1b45 100644
--- a/sound/soc/davinci/Kconfig
+++ b/sound/soc/davinci/Kconfig
@@ -29,7 +29,6 @@ choice
prompt "DM365 codec select"
depends on SND_DAVINCI_SOC_EVM
depends on MACH_DAVINCI_DM365_EVM
- default SND_DM365_EXTERNAL_CODEC
config SND_DM365_AIC3X_CODEC
bool "Audio Codec - AIC3101"
diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c
index fe02903f7d0f..80d9598db31a 100644
--- a/tools/perf/util/config.c
+++ b/tools/perf/util/config.c
@@ -341,7 +341,7 @@ const char *perf_config_dirname(const char *name, const char *value)
static int perf_default_core_config(const char *var __used, const char *value __used)
{
- /* Add other config variables here and to Documentation/config.txt. */
+ /* Add other config variables here. */
return 0;
}
@@ -350,7 +350,7 @@ int perf_default_config(const char *var, const char *value, void *dummy __used)
if (!prefixcmp(var, "core."))
return perf_default_core_config(var, value);
- /* Add other config variables here and to Documentation/config.txt. */
+ /* Add other config variables here. */
return 0;
}