summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-08-20 12:46:00 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2021-08-20 12:46:00 -0700
commita27c75e554feb63a0e72b9479bab0b49600d1410 (patch)
tree28f1091f0da03370b81646b94a0f2e6904405b57
parent43a6473e4713004fbe755a062c2d37c9bde05c2e (diff)
parent419dd626e357e89fc9c4e3863592c8b38cfe1571 (diff)
downloadlinux-a27c75e554feb63a0e72b9479bab0b49600d1410.tar.bz2
Merge tag 'mmc-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson: - dw_mmc: Fix hang on data CRC error - mmci: Fix voltage switch procedure for the stm32 variant - sdhci-iproc: Fix some clock issues for BCM2711 - sdhci-msm: Fixup software timeout value * tag 'mmc-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711 mmc: sdhci-iproc: Cap min clock frequency on BCM2711 mmc: sdhci-msm: Update the software timeout value for sdhc mmc: mmci: stm32: Check when the voltage switch procedure should be done mmc: dw_mmc: Fix hang on data CRC error
-rw-r--r--drivers/mmc/host/dw_mmc.c6
-rw-r--r--drivers/mmc/host/mmci_stm32_sdmmc.c7
-rw-r--r--drivers/mmc/host/sdhci-iproc.c21
-rw-r--r--drivers/mmc/host/sdhci-msm.c18
4 files changed, 46 insertions, 6 deletions
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index d333130d1531..c3229d8c7041 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2018,8 +2018,8 @@ static void dw_mci_tasklet_func(struct tasklet_struct *t)
continue;
}
- dw_mci_stop_dma(host);
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_SENDING_STOP;
break;
}
@@ -2043,10 +2043,10 @@ static void dw_mci_tasklet_func(struct tasklet_struct *t)
*/
if (test_and_clear_bit(EVENT_DATA_ERROR,
&host->pending_events)) {
- dw_mci_stop_dma(host);
if (!(host->data_status & (SDMMC_INT_DRTO |
SDMMC_INT_EBE)))
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_DATA_ERROR;
break;
}
@@ -2079,10 +2079,10 @@ static void dw_mci_tasklet_func(struct tasklet_struct *t)
*/
if (test_and_clear_bit(EVENT_DATA_ERROR,
&host->pending_events)) {
- dw_mci_stop_dma(host);
if (!(host->data_status & (SDMMC_INT_DRTO |
SDMMC_INT_EBE)))
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_DATA_ERROR;
break;
}
diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index 51db30acf4dc..fdaa11f92fe6 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -479,8 +479,9 @@ static int sdmmc_post_sig_volt_switch(struct mmci_host *host,
u32 status;
int ret = 0;
- if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
- spin_lock_irqsave(&host->lock, flags);
+ spin_lock_irqsave(&host->lock, flags);
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180 &&
+ host->pwr_reg & MCI_STM32_VSWITCHEN) {
mmci_write_pwrreg(host, host->pwr_reg | MCI_STM32_VSWITCH);
spin_unlock_irqrestore(&host->lock, flags);
@@ -492,9 +493,11 @@ static int sdmmc_post_sig_volt_switch(struct mmci_host *host,
writel_relaxed(MCI_STM32_VSWENDC | MCI_STM32_CKSTOPC,
host->base + MMCICLEAR);
+ spin_lock_irqsave(&host->lock, flags);
mmci_write_pwrreg(host, host->pwr_reg &
~(MCI_STM32_VSWITCHEN | MCI_STM32_VSWITCH));
}
+ spin_unlock_irqrestore(&host->lock, flags);
return ret;
}
diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
index cce390fe9cf3..e7565c671998 100644
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -173,6 +173,23 @@ static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
return pltfm_host->clock;
}
+/*
+ * There is a known bug on BCM2711's SDHCI core integration where the
+ * controller will hang when the difference between the core clock and the bus
+ * clock is too great. Specifically this can be reproduced under the following
+ * conditions:
+ *
+ * - No SD card plugged in, polling thread is running, probing cards at
+ * 100 kHz.
+ * - BCM2711's core clock configured at 500MHz or more
+ *
+ * So we set 200kHz as the minimum clock frequency available for that SoC.
+ */
+static unsigned int sdhci_iproc_bcm2711_get_min_clock(struct sdhci_host *host)
+{
+ return 200000;
+}
+
static const struct sdhci_ops sdhci_iproc_ops = {
.set_clock = sdhci_set_clock,
.get_max_clock = sdhci_iproc_get_max_clock,
@@ -271,13 +288,15 @@ static const struct sdhci_ops sdhci_iproc_bcm2711_ops = {
.set_clock = sdhci_set_clock,
.set_power = sdhci_set_power_and_bus_voltage,
.get_max_clock = sdhci_iproc_get_max_clock,
+ .get_min_clock = sdhci_iproc_bcm2711_get_min_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
};
static const struct sdhci_pltfm_data sdhci_bcm2711_pltfm_data = {
- .quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
+ .quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 |
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.ops = &sdhci_iproc_bcm2711_ops,
};
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index e44b7a66b73c..290a14cdc1cf 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -2089,6 +2089,23 @@ static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery)
sdhci_cqe_disable(mmc, recovery);
}
+static void sdhci_msm_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ u32 count, start = 15;
+
+ __sdhci_set_timeout(host, cmd);
+ count = sdhci_readb(host, SDHCI_TIMEOUT_CONTROL);
+ /*
+ * Update software timeout value if its value is less than hardware data
+ * timeout value. Qcom SoC hardware data timeout value was calculated
+ * using 4 * MCLK * 2^(count + 13). where MCLK = 1 / host->clock.
+ */
+ if (cmd && cmd->data && host->clock > 400000 &&
+ host->clock <= 50000000 &&
+ ((1 << (count + start)) > (10 * host->clock)))
+ host->data_timeout = 22LL * NSEC_PER_SEC;
+}
+
static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
.enable = sdhci_msm_cqe_enable,
.disable = sdhci_msm_cqe_disable,
@@ -2438,6 +2455,7 @@ static const struct sdhci_ops sdhci_msm_ops = {
.irq = sdhci_msm_cqe_irq,
.dump_vendor_regs = sdhci_msm_dump_vendor_regs,
.set_power = sdhci_set_power_noreg,
+ .set_timeout = sdhci_msm_set_timeout,
};
static const struct sdhci_pltfm_data sdhci_msm_pdata = {