diff options
| author | Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> | 2020-12-23 16:30:21 +0900 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2021-02-01 11:54:43 +0100 |
| commit | 35cdcd1268f654f55e2308767349c44bd25d8009 (patch) | |
| tree | da7d8cefa69aab28bcb244d39ca5a46a90ba6e87 | |
| parent | e085b51c74cc99334c290f7c67d039c95f788239 (diff) | |
| download | linux-35cdcd1268f654f55e2308767349c44bd25d8009.tar.bz2 | |
mmc: tmio: Add data timeout error detection
Currently, busy timeout is not checked for data transfer command. But,
if the temperature condition changes, the data cannot be acquired
correctly and timeout may occur. Also, we could reproduce an issue by
using mmc_test driver (e.g. "Correct xfer_size at write (start
failure)"). Therefore, this adds timeout error check.
Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
[saito: rework commit message.]
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[shimoda: rebase, add commit description]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/1608708622-29668-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| -rw-r--r-- | drivers/mmc/host/tmio_mmc_core.c | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index 942b8375179c..21492b56b253 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -477,8 +477,10 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat) if (!data) goto out; - if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR || - stat & TMIO_STAT_TXUNDERRUN) + if (stat & TMIO_STAT_DATATIMEOUT) + data->error = -ETIMEDOUT; + else if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR || + stat & TMIO_STAT_TXUNDERRUN) data->error = -EILSEQ; if (host->dma_on && (data->flags & MMC_DATA_WRITE)) { u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS); |