diff options
| author | Damien Le Moal <damien.lemoal@wdc.com> | 2020-12-13 22:50:35 +0900 |
|---|---|---|
| committer | Palmer Dabbelt <palmerdabbelt@google.com> | 2021-01-07 18:02:13 -0800 |
| commit | 1f1496a923b6ba16679074fe77100e1b53cdb880 (patch) | |
| tree | 268c82161fcf45e55a866d9e158ef748827214e0 | |
| parent | 11f4c2e940e2f317c9d8fb5a79702f2a4a02ff98 (diff) | |
| download | linux-1f1496a923b6ba16679074fe77100e1b53cdb880.tar.bz2 | |
riscv: Fix sifive serial driver
Setup the port uartclk in sifive_serial_probe() so that the base baud
rate is correctly printed during device probe instead of always showing
"0". I.e. the probe message is changed from
38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1,
base_baud = 0) is a SiFive UART v0
to the correct:
38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1,
base_baud = 115200) is a SiFive UART v0
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
| -rw-r--r-- | drivers/tty/serial/sifive.c | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index 1066eebe3b28..328d5a78792f 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -1000,6 +1000,7 @@ static int sifive_serial_probe(struct platform_device *pdev) /* Set up clock divider */ ssp->clkin_rate = clk_get_rate(ssp->clk); ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE; + ssp->port.uartclk = ssp->baud_rate * 16; __ssp_update_div(ssp); platform_set_drvdata(pdev, ssp); |