Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull some more input subsystem updates from Dmitry Torokhov:
 "An updated xpad driver with a few more recognized device IDs, and a
  new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads
  via SPI bus"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cros_ec_keyb - remove extraneous 'const'
  Input: add support for PlayStation 1/2 joypads connected via SPI
  Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth
  Input: xpad - sync supported devices with xboxdrv
  Input: xpad - sort supported devices by USB ID

5 files changed, 445 insertions, 7 deletions

diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 4215b5382092..f3c2f6ea8b44 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -330,4 +330,25 @@ config JOYSTICK_MAPLE
 	  To compile this as a module choose M here: the module will be called
 	  maplecontrol.
 
+config JOYSTICK_PSXPAD_SPI
+	tristate "PlayStation 1/2 joypads via SPI interface"
+	depends on SPI
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you wish to connect PlayStation 1/2 joypads
+	  via SPI interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called psxpad-spi.
+
+config JOYSTICK_PSXPAD_SPI_FF
+	bool "PlayStation 1/2 joypads force feedback (rumble) support"
+	depends on JOYSTICK_PSXPAD_SPI
+	select INPUT_FF_MEMLESS
+	help
+	  Say Y here if you want to take advantage of PlayStation 1/2
+	  joypads rumble features.
+
+	  To drive rumble motor a dedicated power supply is required.
+
 endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 92dc0de9dfed..496fd56b3f1b 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_JOYSTICK_INTERACT)		+= interact.o
 obj-$(CONFIG_JOYSTICK_JOYDUMP)		+= joydump.o
 obj-$(CONFIG_JOYSTICK_MAGELLAN)		+= magellan.o
 obj-$(CONFIG_JOYSTICK_MAPLE)		+= maplecontrol.o
+obj-$(CONFIG_JOYSTICK_PSXPAD_SPI)	+= psxpad-spi.o
 obj-$(CONFIG_JOYSTICK_SIDEWINDER)	+= sidewinder.o
 obj-$(CONFIG_JOYSTICK_SPACEBALL)	+= spaceball.o
 obj-$(CONFIG_JOYSTICK_SPACEORB)		+= spaceorb.o
diff --git a/drivers/input/joystick/psxpad-spi.c b/drivers/input/joystick/psxpad-spi.c
new file mode 100644
index 000000000000..28b473f6cbb6
--- /dev/null
+++ b/drivers/input/joystick/psxpad-spi.c
@@ -0,0 +1,401 @@
+/*
+ * PlayStation 1/2 joypads via SPI interface Driver
+ *
+ * Copyright (C) 2017 Tomohiro Yoshidomi <sylph23k@gmail.com>
+ * Licensed under the GPL-2 or later.
+ *
+ * PlayStation 1/2 joypad's plug (not socket)
+ *  123 456 789
+ * (...|...|...)
+ *
+ * 1: DAT -> MISO (pullup with 1k owm to 3.3V)
+ * 2: CMD -> MOSI
+ * 3: 9V (for motor, if not use N.C.)
+ * 4: GND
+ * 5: 3.3V
+ * 6: Attention -> CS(SS)
+ * 7: SCK -> SCK
+ * 8: N.C.
+ * 9: ACK -> N.C.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+#define REVERSE_BIT(x) ((((x) & 0x80) >> 7) | (((x) & 0x40) >> 5) | \
+	(((x) & 0x20) >> 3) | (((x) & 0x10) >> 1) | (((x) & 0x08) << 1) | \
+	(((x) & 0x04) << 3) | (((x) & 0x02) << 5) | (((x) & 0x01) << 7))
+
+/* PlayStation 1/2 joypad command and response are LSBFIRST. */
+
+/*
+ *	0x01, 0x42, 0x00, 0x00, 0x00,
+ *	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ *	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ */
+static const u8 PSX_CMD_POLL[] = {
+	0x80, 0x42, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+/*	0x01, 0x43, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 */
+static const u8 PSX_CMD_ENTER_CFG[] = {
+	0x80, 0xC2, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+/*	0x01, 0x43, 0x00, 0x00, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A */
+static const u8 PSX_CMD_EXIT_CFG[] = {
+	0x80, 0xC2, 0x00, 0x00, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A
+};
+/*	0x01, 0x4D, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFF */
+static const u8 PSX_CMD_ENABLE_MOTOR[]	= {
+	0x80, 0xB2, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0xFF, 0xFF
+};
+
+struct psxpad {
+	struct spi_device *spi;
+	struct input_polled_dev *pdev;
+	char phys[0x20];
+	bool motor1enable;
+	bool motor2enable;
+	u8 motor1level;
+	u8 motor2level;
+	u8 sendbuf[0x20] ____cacheline_aligned;
+	u8 response[sizeof(PSX_CMD_POLL)] ____cacheline_aligned;
+};
+
+static int psxpad_command(struct psxpad *pad, const u8 sendcmdlen)
+{
+	struct spi_transfer xfers = {
+		.tx_buf		= pad->sendbuf,
+		.rx_buf		= pad->response,
+		.len		= sendcmdlen,
+	};
+	int err;
+
+	err = spi_sync_transfer(pad->spi, &xfers, 1);
+	if (err) {
+		dev_err(&pad->spi->dev,
+			"%s: failed to SPI xfers mode: %d\n",
+			__func__, err);
+		return err;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_JOYSTICK_PSXPAD_SPI_FF
+static void psxpad_control_motor(struct psxpad *pad,
+				 bool motor1enable, bool motor2enable)
+{
+	int err;
+
+	pad->motor1enable = motor1enable;
+	pad->motor2enable = motor2enable;
+
+	memcpy(pad->sendbuf, PSX_CMD_ENTER_CFG, sizeof(PSX_CMD_ENTER_CFG));
+	err = psxpad_command(pad, sizeof(PSX_CMD_ENTER_CFG));
+	if (err) {
+		dev_err(&pad->spi->dev,
+			"%s: failed to enter config mode: %d\n",
+			__func__, err);
+		return;
+	}
+
+	memcpy(pad->sendbuf, PSX_CMD_ENABLE_MOTOR,
+	       sizeof(PSX_CMD_ENABLE_MOTOR));
+	pad->sendbuf[3] = pad->motor1enable ? 0x00 : 0xFF;
+	pad->sendbuf[4] = pad->motor2enable ? 0x80 : 0xFF;
+	err = psxpad_command(pad, sizeof(PSX_CMD_ENABLE_MOTOR));
+	if (err) {
+		dev_err(&pad->spi->dev,
+			"%s: failed to enable motor mode: %d\n",
+			__func__, err);
+		return;
+	}
+
+	memcpy(pad->sendbuf, PSX_CMD_EXIT_CFG, sizeof(PSX_CMD_EXIT_CFG));
+	err = psxpad_command(pad, sizeof(PSX_CMD_EXIT_CFG));
+	if (err) {
+		dev_err(&pad->spi->dev,
+			"%s: failed to exit config mode: %d\n",
+			__func__, err);
+		return;
+	}
+}
+
+static void psxpad_set_motor_level(struct psxpad *pad,
+				   u8 motor1level, u8 motor2level)
+{
+	pad->motor1level = motor1level ? 0xFF : 0x00;
+	pad->motor2level = REVERSE_BIT(motor2level);
+}
+
+static int psxpad_spi_play_effect(struct input_dev *idev,
+				  void *data, struct ff_effect *effect)
+{
+	struct input_polled_dev *pdev = input_get_drvdata(idev);
+	struct psxpad *pad = pdev->private;
+
+	switch (effect->type) {
+	case FF_RUMBLE:
+		psxpad_set_motor_level(pad,
+			(effect->u.rumble.weak_magnitude >> 8) & 0xFFU,
+			(effect->u.rumble.strong_magnitude >> 8) & 0xFFU);
+		break;
+	}
+
+	return 0;
+}
+
+static int psxpad_spi_init_ff(struct psxpad *pad)
+{
+	int err;
+
+	input_set_capability(pad->pdev->input, EV_FF, FF_RUMBLE);
+
+	err = input_ff_create_memless(pad->pdev->input, NULL,
+				      psxpad_spi_play_effect);
+	if (err) {
+		dev_err(&pad->spi->dev,
+			"input_ff_create_memless() failed: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+#else	/* CONFIG_JOYSTICK_PSXPAD_SPI_FF */
+
+static void psxpad_control_motor(struct psxpad *pad,
+				 bool motor1enable, bool motor2enable)
+{
+}
+
+static void psxpad_set_motor_level(struct psxpad *pad,
+				   u8 motor1level, u8 motor2level)
+{
+}
+
+static inline int psxpad_spi_init_ff(struct psxpad *pad)
+{
+	return 0;
+}
+#endif	/* CONFIG_JOYSTICK_PSXPAD_SPI_FF */
+
+static void psxpad_spi_poll_open(struct input_polled_dev *pdev)
+{
+	struct psxpad *pad = pdev->private;
+
+	pm_runtime_get_sync(&pad->spi->dev);
+}
+
+static void psxpad_spi_poll_close(struct input_polled_dev *pdev)
+{
+	struct psxpad *pad = pdev->private;
+
+	pm_runtime_put_sync(&pad->spi->dev);
+}
+
+static void psxpad_spi_poll(struct input_polled_dev *pdev)
+{
+	struct psxpad *pad = pdev->private;
+	struct input_dev *input = pdev->input;
+	u8 b_rsp3, b_rsp4;
+	int err;
+
+	psxpad_control_motor(pad, true, true);
+
+	memcpy(pad->sendbuf, PSX_CMD_POLL, sizeof(PSX_CMD_POLL));
+	pad->sendbuf[3] = pad->motor1enable ? pad->motor1level : 0x00;
+	pad->sendbuf[4] = pad->motor2enable ? pad->motor2level : 0x00;
+	err = psxpad_command(pad, sizeof(PSX_CMD_POLL));
+	if (err) {
+		dev_err(&pad->spi->dev,
+			"%s: poll command failed mode: %d\n", __func__, err);
+		return;
+	}
+
+	switch (pad->response[1]) {
+	case 0xCE:	/* 0x73 : analog 1 */
+		/* button data is inverted */
+		b_rsp3 = ~pad->response[3];
+		b_rsp4 = ~pad->response[4];
+
+		input_report_abs(input, ABS_X, REVERSE_BIT(pad->response[7]));
+		input_report_abs(input, ABS_Y, REVERSE_BIT(pad->response[8]));
+		input_report_abs(input, ABS_RX, REVERSE_BIT(pad->response[5]));
+		input_report_abs(input, ABS_RY, REVERSE_BIT(pad->response[6]));
+		input_report_key(input, BTN_DPAD_UP, b_rsp3 & BIT(3));
+		input_report_key(input, BTN_DPAD_DOWN, b_rsp3 & BIT(1));
+		input_report_key(input, BTN_DPAD_LEFT, b_rsp3 & BIT(0));
+		input_report_key(input, BTN_DPAD_RIGHT, b_rsp3 & BIT(2));
+		input_report_key(input, BTN_X, b_rsp4 & BIT(3));
+		input_report_key(input, BTN_A, b_rsp4 & BIT(2));
+		input_report_key(input, BTN_B, b_rsp4 & BIT(1));
+		input_report_key(input, BTN_Y, b_rsp4 & BIT(0));
+		input_report_key(input, BTN_TL, b_rsp4 & BIT(5));
+		input_report_key(input, BTN_TR, b_rsp4 & BIT(4));
+		input_report_key(input, BTN_TL2, b_rsp4 & BIT(7));
+		input_report_key(input, BTN_TR2, b_rsp4 & BIT(6));
+		input_report_key(input, BTN_THUMBL, b_rsp3 & BIT(6));
+		input_report_key(input, BTN_THUMBR, b_rsp3 & BIT(5));
+		input_report_key(input, BTN_SELECT, b_rsp3 & BIT(7));
+		input_report_key(input, BTN_START, b_rsp3 & BIT(4));
+		break;
+
+	case 0x82:	/* 0x41 : digital */
+		/* button data is inverted */
+		b_rsp3 = ~pad->response[3];
+		b_rsp4 = ~pad->response[4];
+
+		input_report_abs(input, ABS_X, 0x80);
+		input_report_abs(input, ABS_Y, 0x80);
+		input_report_abs(input, ABS_RX, 0x80);
+		input_report_abs(input, ABS_RY, 0x80);
+		input_report_key(input, BTN_DPAD_UP, b_rsp3 & BIT(3));
+		input_report_key(input, BTN_DPAD_DOWN, b_rsp3 & BIT(1));
+		input_report_key(input, BTN_DPAD_LEFT, b_rsp3 & BIT(0));
+		input_report_key(input, BTN_DPAD_RIGHT, b_rsp3 & BIT(2));
+		input_report_key(input, BTN_X, b_rsp4 & BIT(3));
+		input_report_key(input, BTN_A, b_rsp4 & BIT(2));
+		input_report_key(input, BTN_B, b_rsp4 & BIT(1));
+		input_report_key(input, BTN_Y, b_rsp4 & BIT(0));
+		input_report_key(input, BTN_TL, b_rsp4 & BIT(5));
+		input_report_key(input, BTN_TR, b_rsp4 & BIT(4));
+		input_report_key(input, BTN_TL2, b_rsp4 & BIT(7));
+		input_report_key(input, BTN_TR2, b_rsp4 & BIT(6));
+		input_report_key(input, BTN_THUMBL, false);
+		input_report_key(input, BTN_THUMBR, false);
+		input_report_key(input, BTN_SELECT, b_rsp3 & BIT(7));
+		input_report_key(input, BTN_START, b_rsp3 & BIT(4));
+		break;
+	}
+
+	input_sync(input);
+}
+
+static int psxpad_spi_probe(struct spi_device *spi)
+{
+	struct psxpad *pad;
+	struct input_polled_dev *pdev;
+	struct input_dev *idev;
+	int err;
+
+	pad = devm_kzalloc(&spi->dev, sizeof(struct psxpad), GFP_KERNEL);
+	if (!pad)
+		return -ENOMEM;
+
+	pdev = input_allocate_polled_device();
+	if (!pdev) {
+		dev_err(&spi->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	/* input poll device settings */
+	pad->pdev = pdev;
+	pad->spi = spi;
+
+	pdev->private = pad;
+	pdev->open = psxpad_spi_poll_open;
+	pdev->close = psxpad_spi_poll_close;
+	pdev->poll = psxpad_spi_poll;
+	/* poll interval is about 60fps */
+	pdev->poll_interval = 16;
+	pdev->poll_interval_min = 8;
+	pdev->poll_interval_max = 32;
+
+	/* input device settings */
+	idev = pdev->input;
+	idev->name = "PlayStation 1/2 joypad";
+	snprintf(pad->phys, sizeof(pad->phys), "%s/input", dev_name(&spi->dev));
+	idev->id.bustype = BUS_SPI;
+
+	/* key/value map settings */
+	input_set_abs_params(idev, ABS_X, 0, 255, 0, 0);
+	input_set_abs_params(idev, ABS_Y, 0, 255, 0, 0);
+	input_set_abs_params(idev, ABS_RX, 0, 255, 0, 0);
+	input_set_abs_params(idev, ABS_RY, 0, 255, 0, 0);
+	input_set_capability(idev, EV_KEY, BTN_DPAD_UP);
+	input_set_capability(idev, EV_KEY, BTN_DPAD_DOWN);
+	input_set_capability(idev, EV_KEY, BTN_DPAD_LEFT);
+	input_set_capability(idev, EV_KEY, BTN_DPAD_RIGHT);
+	input_set_capability(idev, EV_KEY, BTN_A);
+	input_set_capability(idev, EV_KEY, BTN_B);
+	input_set_capability(idev, EV_KEY, BTN_X);
+	input_set_capability(idev, EV_KEY, BTN_Y);
+	input_set_capability(idev, EV_KEY, BTN_TL);
+	input_set_capability(idev, EV_KEY, BTN_TR);
+	input_set_capability(idev, EV_KEY, BTN_TL2);
+	input_set_capability(idev, EV_KEY, BTN_TR2);
+	input_set_capability(idev, EV_KEY, BTN_THUMBL);
+	input_set_capability(idev, EV_KEY, BTN_THUMBR);
+	input_set_capability(idev, EV_KEY, BTN_SELECT);
+	input_set_capability(idev, EV_KEY, BTN_START);
+
+	err = psxpad_spi_init_ff(pad);
+	if (err)
+		return err;
+
+	/* SPI settings */
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	/* (PlayStation 1/2 joypad might be possible works 250kHz/500kHz) */
+	spi->master->min_speed_hz = 125000;
+	spi->master->max_speed_hz = 125000;
+	spi_setup(spi);
+
+	/* pad settings */
+	psxpad_set_motor_level(pad, 0, 0);
+
+	/* register input poll device */
+	err = input_register_polled_device(pdev);
+	if (err) {
+		dev_err(&spi->dev,
+			"failed to register input poll device: %d\n", err);
+		return err;
+	}
+
+	pm_runtime_enable(&spi->dev);
+
+	return 0;
+}
+
+static int __maybe_unused psxpad_spi_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct psxpad *pad = spi_get_drvdata(spi);
+
+	psxpad_set_motor_level(pad, 0, 0);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(psxpad_spi_pm, psxpad_spi_suspend, NULL);
+
+static const struct spi_device_id psxpad_spi_id[] = {
+	{ "psxpad-spi", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, psxpad_spi_id);
+
+static struct spi_driver psxpad_spi_driver = {
+	.driver = {
+		.name = "psxpad-spi",
+		.pm = &psxpad_spi_pm,
+	},
+	.id_table = psxpad_spi_id,
+	.probe   = psxpad_spi_probe,
+};
+
+module_spi_driver(psxpad_spi_driver);
+
+MODULE_AUTHOR("Tomohiro Yoshidomi <sylph23k@gmail.com>");
+MODULE_DESCRIPTION("PlayStation 1/2 joypads via SPI interface Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index df83fdc6c0e7..def96cd2479b 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -126,25 +126,26 @@ static const struct xpad_device {
 	u8 mapping;
 	u8 xtype;
 } xpad_device[] = {
+	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+	{ 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
 	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE },
-	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
-	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
-	{ 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
 	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
+	{ 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 },
 	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX },
 	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
@@ -179,13 +180,15 @@ static const struct xpad_device {
 	{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x011f, "Rock Candy Gamepad Wired Controller", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0139, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
-	{ 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0413, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
 	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
 	{ 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX },
 	{ 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 },
@@ -209,27 +212,38 @@ static const struct xpad_device {
 	{ 0x162e, 0xbeef, "Joytech Neo-Se Take2", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
-	{ 0x24c6, 0x542a, "Xbox ONE spectra", 0, XTYPE_XBOXONE },
-	{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf018, "Mad Catz Street Fighter IV SE Fighting Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf019, "Mad Catz Brawlstick for Xbox 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf021, "Mad Cats Ghost Recon FS GamePad", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf02e, "Mad Catz Fightpad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf03a, "Mad Catz SFxT Fightstick Pro", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x531a, "PowerA Pro Ex", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5397, "FUS1ON Tournament Controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x541a, "PowerA Xbox One Mini Wired Controller", 0, XTYPE_XBOXONE },
+	{ 0x24c6, 0x542a, "Xbox ONE spectra", 0, XTYPE_XBOXONE },
 	{ 0x24c6, 0x543a, "PowerA Xbox One wired controller", 0, XTYPE_XBOXONE },
 	{ 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
 };
@@ -316,6 +330,7 @@ static struct usb_device_id xpad_table[] = {
 	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft X-Box One controllers */
 	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
+	XPAD_XBOX360_VENDOR(0x056e),		/* Elecom JC-U3613M */
 	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
 	{ USB_DEVICE(0x0738, 0x4540) },		/* Mad Catz Beat Pad */
 	XPAD_XBOXONE_VENDOR(0x0738),		/* Mad Catz FightStick TE 2 */
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index c7a8120b13c0..79eb29550c34 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -660,7 +660,7 @@ static const struct of_device_id cros_ec_keyb_of_match[] = {
 MODULE_DEVICE_TABLE(of, cros_ec_keyb_of_match);
 #endif
 
-static const SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume);
+static SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume);
 
 static struct platform_driver cros_ec_keyb_driver = {
 	.probe = cros_ec_keyb_probe,