Merge tag 'timers-v5.9' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clock event/surce driver changes from Daniel Lezcano:

  - Add sama5d2 support and rework the 32kHz clock handling (Alexandre Belloni)
  - Add the high resolution support for SMP/SMT on the Ingenic timer (Zhou Yanjie)
  - Add support for i.MX TPM driver with ARM64 (Anson Huang)
  - Fix typo by replacing KHz to kHz (Geert Uytterhoeven)
  - Add 32kHz support by setting the minimum ticks to 5 on Nomadik MTU (Linus Walleij)
  - Replace HTTP links with HTTPS ones for security reasons (Alexander A. Klimov)
  - Add support for the Ingenic X1000 OST (Zhou Yanjie)

16 files changed, 990 insertions, 172 deletions

diff --git a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt
deleted file mode 100644
index c4a83e364cb6..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Device tree bindings for Atmel Timer Counter Blocks
-- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon".
-  <chip> can be "at91rm9200" or "at91sam9x5"
-- reg: Should contain registers location and length
-- #address-cells: has to be 1
-- #size-cells: has to be 0
-- interrupts: Should contain all interrupts for the TC block
-  Note that you can specify several interrupt cells if the TC
-  block has one interrupt per channel.
-- clock-names: tuple listing input clock names.
-	Required elements: "t0_clk", "slow_clk"
-	Optional elements: "t1_clk", "t2_clk"
-- clocks: phandles to input clocks.
-
-The TCB can expose multiple subdevices:
- * a timer
-   - compatible: Should be "atmel,tcb-timer"
-   - reg: Should contain the TCB channels to be used. If the
-     counter width is 16 bits (at91rm9200-tcb), two consecutive
-     channels are needed. Else, only one channel will be used.
-
-Examples:
-
-One interrupt per TC block:
-	tcb0: timer@fff7c000 {
-		compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xfff7c000 0x100>;
-		interrupts = <18 4>;
-		clocks = <&tcb0_clk>, <&clk32k>;
-		clock-names = "t0_clk", "slow_clk";
-
-		timer@0 {
-			compatible = "atmel,tcb-timer";
-			reg = <0>, <1>;
-		};
-
-		timer@2 {
-			compatible = "atmel,tcb-timer";
-			reg = <2>;
-		};
-	};
-
-One interrupt per TC channel in a TC block:
-	tcb1: timer@fffdc000 {
-		compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xfffdc000 0x100>;
-		interrupts = <26 4>, <27 4>, <28 4>;
-		clocks = <&tcb1_clk>, <&clk32k>;
-		clock-names = "t0_clk", "slow_clk";
-	};
-
-
diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
new file mode 100644
index 000000000000..d226fd7d5258
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Atmel Timer Counter Block
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  The Atmel (now Microchip) SoCs have timers named Timer Counter Block. Each
+  timer has three channels with two counters each.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - atmel,at91rm9200-tcb
+          - atmel,at91sam9x5-tcb
+          - atmel,sama5d2-tcb
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      List of interrupts. One interrupt per TCB channel if available or one
+      interrupt for the TC block
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    description:
+      List of clock names. Always includes t0_clk and slow clk. Also includes
+      t1_clk and t2_clk if a clock per channel is available.
+    minItems: 2
+    maxItems: 4
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^timer@[0-2]$":
+    description: The timer block channels that are used as timers.
+    type: object
+    properties:
+      compatible:
+        const: atmel,tcb-timer
+      reg:
+        description:
+          List of channels to use for this particular timer.
+        minItems: 1
+        maxItems: 3
+
+    required:
+      - compatible
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,sama5d2-tcb
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: t0_clk
+            - const: gclk
+            - const: slow_clk
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 4
+        clock-names:
+          oneOf:
+            - items:
+              - const: t0_clk
+              - const: slow_clk
+            - items:
+              - const: t0_clk
+              - const: t1_clk
+              - const: t2_clk
+              - const: slow_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* One interrupt per TC block: */
+        tcb0: timer@fff7c000 {
+                compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0xfff7c000 0x100>;
+                interrupts = <18 4>;
+                clocks = <&tcb0_clk>, <&clk32k>;
+                clock-names = "t0_clk", "slow_clk";
+
+                timer@0 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <0>, <1>;
+                };
+
+                timer@2 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <2>;
+                };
+        };
+
+    /* One interrupt per TC channel in a TC block: */
+        tcb1: timer@fffdc000 {
+                compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0xfffdc000 0x100>;
+                interrupts = <26 4>, <27 4>, <28 4>;
+                clocks = <&tcb1_clk>, <&clk32k>;
+                clock-names = "t0_clk", "slow_clk";
+
+                timer@0 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <0>;
+                };
+
+                timer@1 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <1>;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml b/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml
new file mode 100644
index 000000000000..df3eb76045e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ingenic,sysost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for SYSOST in Ingenic XBurst family SoCs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  The SYSOST in an Ingenic SoC provides one 64bit timer for clocksource
+  and one or more 32bit timers for clockevent.
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - ingenic,x1000-ost
+      - ingenic,x2000-ost
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ost
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/x1000-cgu.h>
+
+    ost: timer@12000000 {
+        compatible = "ingenic,x1000-ost";
+        reg = <0x12000000 0x3c>;
+
+        #clock-cells = <1>;
+
+        clocks = <&cgu X1000_CLK_OST>;
+        clock-names = "ost";
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt b/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
index 5fbe361252b4..d3905a5412b8 100644
--- a/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
+++ b/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
@@ -10,7 +10,7 @@ It is global timer is a free running up-counter and can generate interrupt
 when the counter reaches preset counter values.
 
 Documentation:
-http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
 
 Required properties:
 
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 31d8766ec7ef..d7f25706892d 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -375,23 +375,23 @@
 			};
 
 			tcb0: timer@f800c000 {
-				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xf800c000 0x100>;
 				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
 			};
 
 			tcb1: timer@f8010000 {
-				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xf8010000 0x100>;
 				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_GCK 36>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
 			};
 
 			hsmc: hsmc@f8014000 {
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 91418381fcd4..2ed8b4361d95 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -616,8 +616,9 @@ config CLKSRC_IMX_GPT
 
 config CLKSRC_IMX_TPM
 	bool "Clocksource using i.MX TPM" if COMPILE_TEST
-	depends on ARM && CLKDEV_LOOKUP
+	depends on (ARM || ARM64) && CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select TIMER_OF
 	help
 	  Enable this option to use IMX Timer/PWM Module (TPM) timer as
 	  clocksource.
@@ -696,8 +697,18 @@ config INGENIC_TIMER
 	help
 	  Support for the timer/counter unit of the Ingenic JZ SoCs.
 
+config INGENIC_SYSOST
+	bool "Clocksource/timer using the SYSOST in Ingenic X SoCs"
+	depends on MIPS || COMPILE_TEST
+	depends on COMMON_CLK
+	select MFD_SYSCON
+	select TIMER_OF
+	select IRQ_DOMAIN
+	help
+	  Support for the SYSOST of the Ingenic X Series SoCs.
+
 config INGENIC_OST
-	bool "Clocksource for Ingenic OS Timer"
+	bool "Clocksource using the OST in Ingenic JZ SoCs"
 	depends on MIPS || COMPILE_TEST
 	depends on COMMON_CLK
 	select MFD_SYSCON
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index bdda1a2e4097..3994e221e262 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -82,6 +82,7 @@ obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
 obj-$(CONFIG_INGENIC_OST)		+= ingenic-ost.o
+obj-$(CONFIG_INGENIC_SYSOST)	+= ingenic-sysost.o
 obj-$(CONFIG_INGENIC_TIMER)		+= ingenic-timer.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
diff --git a/drivers/clocksource/ingenic-sysost.c b/drivers/clocksource/ingenic-sysost.c
new file mode 100644
index 000000000000..e77d58449005
--- /dev/null
+++ b/drivers/clocksource/ingenic-sysost.c
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic XBurst SoCs SYSOST clocks driver
+ * Copyright (c) 2020 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/ingenic,sysost.h>
+
+/* OST register offsets */
+#define OST_REG_OSTCCR			0x00
+#define OST_REG_OSTCR			0x08
+#define OST_REG_OSTFR			0x0c
+#define OST_REG_OSTMR			0x10
+#define OST_REG_OST1DFR			0x14
+#define OST_REG_OST1CNT			0x18
+#define OST_REG_OST2CNTL		0x20
+#define OST_REG_OSTCNT2HBUF		0x24
+#define OST_REG_OSTESR			0x34
+#define OST_REG_OSTECR			0x38
+
+/* bits within the OSTCCR register */
+#define OSTCCR_PRESCALE1_MASK	0x3
+#define OSTCCR_PRESCALE2_MASK	0xc
+#define OSTCCR_PRESCALE1_LSB	0
+#define OSTCCR_PRESCALE2_LSB	2
+
+/* bits within the OSTCR register */
+#define OSTCR_OST1CLR			BIT(0)
+#define OSTCR_OST2CLR			BIT(1)
+
+/* bits within the OSTFR register */
+#define OSTFR_FFLAG				BIT(0)
+
+/* bits within the OSTMR register */
+#define OSTMR_FMASK				BIT(0)
+
+/* bits within the OSTESR register */
+#define OSTESR_OST1ENS			BIT(0)
+#define OSTESR_OST2ENS			BIT(1)
+
+/* bits within the OSTECR register */
+#define OSTECR_OST1ENC			BIT(0)
+#define OSTECR_OST2ENC			BIT(1)
+
+struct ingenic_soc_info {
+	unsigned int num_channels;
+};
+
+struct ingenic_ost_clk_info {
+	struct clk_init_data init_data;
+	u8 ostccr_reg;
+};
+
+struct ingenic_ost_clk {
+	struct clk_hw hw;
+	unsigned int idx;
+	struct ingenic_ost *ost;
+	const struct ingenic_ost_clk_info *info;
+};
+
+struct ingenic_ost {
+	void __iomem *base;
+	const struct ingenic_soc_info *soc_info;
+	struct clk *clk, *percpu_timer_clk, *global_timer_clk;
+	struct clock_event_device cevt;
+	struct clocksource cs;
+	char name[20];
+
+	struct clk_hw_onecell_data *clocks;
+};
+
+static struct ingenic_ost *ingenic_ost;
+
+static inline struct ingenic_ost_clk *to_ost_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct ingenic_ost_clk, hw);
+}
+
+static unsigned long ingenic_ost_percpu_timer_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+	const struct ingenic_ost_clk_info *info = ost_clk->info;
+	unsigned int prescale;
+
+	prescale = readl(ost_clk->ost->base + info->ostccr_reg);
+
+	prescale = (prescale & OSTCCR_PRESCALE1_MASK) >> OSTCCR_PRESCALE1_LSB;
+
+	return parent_rate >> (prescale * 2);
+}
+
+static unsigned long ingenic_ost_global_timer_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+	const struct ingenic_ost_clk_info *info = ost_clk->info;
+	unsigned int prescale;
+
+	prescale = readl(ost_clk->ost->base + info->ostccr_reg);
+
+	prescale = (prescale & OSTCCR_PRESCALE2_MASK) >> OSTCCR_PRESCALE2_LSB;
+
+	return parent_rate >> (prescale * 2);
+}
+
+static u8 ingenic_ost_get_prescale(unsigned long rate, unsigned long req_rate)
+{
+	u8 prescale;
+
+	for (prescale = 0; prescale < 2; prescale++)
+		if ((rate >> (prescale * 2)) <= req_rate)
+			return prescale;
+
+	return 2; /* /16 divider */
+}
+
+static long ingenic_ost_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long *parent_rate)
+{
+	unsigned long rate = *parent_rate;
+	u8 prescale;
+
+	if (req_rate > rate)
+		return rate;
+
+	prescale = ingenic_ost_get_prescale(rate, req_rate);
+
+	return rate >> (prescale * 2);
+}
+
+static int ingenic_ost_percpu_timer_set_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long parent_rate)
+{
+	struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+	const struct ingenic_ost_clk_info *info = ost_clk->info;
+	u8 prescale = ingenic_ost_get_prescale(parent_rate, req_rate);
+	int val;
+
+	val = readl(ost_clk->ost->base + info->ostccr_reg);
+	val = (val & ~OSTCCR_PRESCALE1_MASK) | (prescale << OSTCCR_PRESCALE1_LSB);
+	writel(val, ost_clk->ost->base + info->ostccr_reg);
+
+	return 0;
+}
+
+static int ingenic_ost_global_timer_set_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long parent_rate)
+{
+	struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+	const struct ingenic_ost_clk_info *info = ost_clk->info;
+	u8 prescale = ingenic_ost_get_prescale(parent_rate, req_rate);
+	int val;
+
+	val = readl(ost_clk->ost->base + info->ostccr_reg);
+	val = (val & ~OSTCCR_PRESCALE2_MASK) | (prescale << OSTCCR_PRESCALE2_LSB);
+	writel(val, ost_clk->ost->base + info->ostccr_reg);
+
+	return 0;
+}
+
+static const struct clk_ops ingenic_ost_percpu_timer_ops = {
+	.recalc_rate	= ingenic_ost_percpu_timer_recalc_rate,
+	.round_rate		= ingenic_ost_round_rate,
+	.set_rate		= ingenic_ost_percpu_timer_set_rate,
+};
+
+static const struct clk_ops ingenic_ost_global_timer_ops = {
+	.recalc_rate	= ingenic_ost_global_timer_recalc_rate,
+	.round_rate		= ingenic_ost_round_rate,
+	.set_rate		= ingenic_ost_global_timer_set_rate,
+};
+
+static const char * const ingenic_ost_clk_parents[] = { "ext" };
+
+static const struct ingenic_ost_clk_info ingenic_ost_clk_info[] = {
+	[OST_CLK_PERCPU_TIMER] = {
+		.init_data = {
+			.name = "percpu timer",
+			.parent_names = ingenic_ost_clk_parents,
+			.num_parents = ARRAY_SIZE(ingenic_ost_clk_parents),
+			.ops = &ingenic_ost_percpu_timer_ops,
+			.flags = CLK_SET_RATE_UNGATE,
+		},
+		.ostccr_reg = OST_REG_OSTCCR,
+	},
+
+	[OST_CLK_GLOBAL_TIMER] = {
+		.init_data = {
+			.name = "global timer",
+			.parent_names = ingenic_ost_clk_parents,
+			.num_parents = ARRAY_SIZE(ingenic_ost_clk_parents),
+			.ops = &ingenic_ost_global_timer_ops,
+			.flags = CLK_SET_RATE_UNGATE,
+		},
+		.ostccr_reg = OST_REG_OSTCCR,
+	},
+};
+
+static u64 notrace ingenic_ost_global_timer_read_cntl(void)
+{
+	struct ingenic_ost *ost = ingenic_ost;
+	unsigned int count;
+
+	count = readl(ost->base + OST_REG_OST2CNTL);
+
+	return count;
+}
+
+static u64 notrace ingenic_ost_clocksource_read(struct clocksource *cs)
+{
+	return ingenic_ost_global_timer_read_cntl();
+}
+
+static inline struct ingenic_ost *to_ingenic_ost(struct clock_event_device *evt)
+{
+	return container_of(evt, struct ingenic_ost, cevt);
+}
+
+static int ingenic_ost_cevt_set_state_shutdown(struct clock_event_device *evt)
+{
+	struct ingenic_ost *ost = to_ingenic_ost(evt);
+
+	writel(OSTECR_OST1ENC, ost->base + OST_REG_OSTECR);
+
+	return 0;
+}
+
+static int ingenic_ost_cevt_set_next(unsigned long next,
+				     struct clock_event_device *evt)
+{
+	struct ingenic_ost *ost = to_ingenic_ost(evt);
+
+	writel((u32)~OSTFR_FFLAG, ost->base + OST_REG_OSTFR);
+	writel(next, ost->base + OST_REG_OST1DFR);
+	writel(OSTCR_OST1CLR, ost->base + OST_REG_OSTCR);
+	writel(OSTESR_OST1ENS, ost->base + OST_REG_OSTESR);
+	writel((u32)~OSTMR_FMASK, ost->base + OST_REG_OSTMR);
+
+	return 0;
+}
+
+static irqreturn_t ingenic_ost_cevt_cb(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	struct ingenic_ost *ost = to_ingenic_ost(evt);
+
+	writel(OSTECR_OST1ENC, ost->base + OST_REG_OSTECR);
+
+	if (evt->event_handler)
+		evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ingenic_ost_register_clock(struct ingenic_ost *ost,
+			unsigned int idx, const struct ingenic_ost_clk_info *info,
+			struct clk_hw_onecell_data *clocks)
+{
+	struct ingenic_ost_clk *ost_clk;
+	int val, err;
+
+	ost_clk = kzalloc(sizeof(*ost_clk), GFP_KERNEL);
+	if (!ost_clk)
+		return -ENOMEM;
+
+	ost_clk->hw.init = &info->init_data;
+	ost_clk->idx = idx;
+	ost_clk->info = info;
+	ost_clk->ost = ost;
+
+	/* Reset clock divider */
+	val = readl(ost->base + info->ostccr_reg);
+	val &= ~(OSTCCR_PRESCALE1_MASK | OSTCCR_PRESCALE2_MASK);
+	writel(val, ost->base + info->ostccr_reg);
+
+	err = clk_hw_register(NULL, &ost_clk->hw);
+	if (err) {
+		kfree(ost_clk);
+		return err;
+	}
+
+	clocks->hws[idx] = &ost_clk->hw;
+
+	return 0;
+}
+
+static struct clk * __init ingenic_ost_get_clock(struct device_node *np, int id)
+{
+	struct of_phandle_args args;
+
+	args.np = np;
+	args.args_count = 1;
+	args.args[0] = id;
+
+	return of_clk_get_from_provider(&args);
+}
+
+static int __init ingenic_ost_percpu_timer_init(struct device_node *np,
+					 struct ingenic_ost *ost)
+{
+	unsigned int timer_virq, channel = OST_CLK_PERCPU_TIMER;
+	unsigned long rate;
+	int err;
+
+	ost->percpu_timer_clk = ingenic_ost_get_clock(np, channel);
+	if (IS_ERR(ost->percpu_timer_clk))
+		return PTR_ERR(ost->percpu_timer_clk);
+
+	err = clk_prepare_enable(ost->percpu_timer_clk);
+	if (err)
+		goto err_clk_put;
+
+	rate = clk_get_rate(ost->percpu_timer_clk);
+	if (!rate) {
+		err = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	timer_virq = of_irq_get(np, 0);
+	if (!timer_virq) {
+		err = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	snprintf(ost->name, sizeof(ost->name), "OST percpu timer");
+
+	err = request_irq(timer_virq, ingenic_ost_cevt_cb, IRQF_TIMER,
+			  ost->name, &ost->cevt);
+	if (err)
+		goto err_irq_dispose_mapping;
+
+	ost->cevt.cpumask = cpumask_of(smp_processor_id());
+	ost->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+	ost->cevt.name = ost->name;
+	ost->cevt.rating = 400;
+	ost->cevt.set_state_shutdown = ingenic_ost_cevt_set_state_shutdown;
+	ost->cevt.set_next_event = ingenic_ost_cevt_set_next;
+
+	clockevents_config_and_register(&ost->cevt, rate, 4, 0xffffffff);
+
+	return 0;
+
+err_irq_dispose_mapping:
+	irq_dispose_mapping(timer_virq);
+err_clk_disable:
+	clk_disable_unprepare(ost->percpu_timer_clk);
+err_clk_put:
+	clk_put(ost->percpu_timer_clk);
+	return err;
+}
+
+static int __init ingenic_ost_global_timer_init(struct device_node *np,
+					       struct ingenic_ost *ost)
+{
+	unsigned int channel = OST_CLK_GLOBAL_TIMER;
+	struct clocksource *cs = &ost->cs;
+	unsigned long rate;
+	int err;
+
+	ost->global_timer_clk = ingenic_ost_get_clock(np, channel);
+	if (IS_ERR(ost->global_timer_clk))
+		return PTR_ERR(ost->global_timer_clk);
+
+	err = clk_prepare_enable(ost->global_timer_clk);
+	if (err)
+		goto err_clk_put;
+
+	rate = clk_get_rate(ost->global_timer_clk);
+	if (!rate) {
+		err = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	/* Clear counter CNT registers */
+	writel(OSTCR_OST2CLR, ost->base + OST_REG_OSTCR);
+
+	/* Enable OST channel */
+	writel(OSTESR_OST2ENS, ost->base + OST_REG_OSTESR);
+
+	cs->name = "ingenic-ost";
+	cs->rating = 400;
+	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+	cs->mask = CLOCKSOURCE_MASK(32);
+	cs->read = ingenic_ost_clocksource_read;
+
+	err = clocksource_register_hz(cs, rate);
+	if (err)
+		goto err_clk_disable;
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(ost->global_timer_clk);
+err_clk_put:
+	clk_put(ost->global_timer_clk);
+	return err;
+}
+
+static const struct ingenic_soc_info x1000_soc_info = {
+	.num_channels = 2,
+};
+
+static const struct of_device_id __maybe_unused ingenic_ost_of_match[] __initconst = {
+	{ .compatible = "ingenic,x1000-ost", .data = &x1000_soc_info, },
+	{ /* sentinel */ }
+};
+
+static int __init ingenic_ost_probe(struct device_node *np)
+{
+	const struct of_device_id *id = of_match_node(ingenic_ost_of_match, np);
+	struct ingenic_ost *ost;
+	unsigned int i;
+	int ret;
+
+	ost = kzalloc(sizeof(*ost), GFP_KERNEL);
+	if (!ost)
+		return -ENOMEM;
+
+	ost->base = of_io_request_and_map(np, 0, of_node_full_name(np));
+	if (IS_ERR(ost->base)) {
+		pr_err("%s: Failed to map OST registers\n", __func__);
+		ret = PTR_ERR(ost->base);
+		goto err_free_ost;
+	}
+
+	ost->clk = of_clk_get_by_name(np, "ost");
+	if (IS_ERR(ost->clk)) {
+		ret = PTR_ERR(ost->clk);
+		pr_crit("%s: Cannot get OST clock\n", __func__);
+		goto err_free_ost;
+	}
+
+	ret = clk_prepare_enable(ost->clk);
+	if (ret) {
+		pr_crit("%s: Unable to enable OST clock\n", __func__);
+		goto err_put_clk;
+	}
+
+	ost->soc_info = id->data;
+
+	ost->clocks = kzalloc(struct_size(ost->clocks, hws, ost->soc_info->num_channels),
+			      GFP_KERNEL);
+	if (!ost->clocks) {
+		ret = -ENOMEM;
+		goto err_clk_disable;
+	}
+
+	ost->clocks->num = ost->soc_info->num_channels;
+
+	for (i = 0; i < ost->clocks->num; i++) {
+		ret = ingenic_ost_register_clock(ost, i, &ingenic_ost_clk_info[i], ost->clocks);
+		if (ret) {
+			pr_crit("%s: Cannot register clock %d\n", __func__, i);
+			goto err_unregister_ost_clocks;
+		}
+	}
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, ost->clocks);
+	if (ret) {
+		pr_crit("%s: Cannot add OF clock provider\n", __func__);
+		goto err_unregister_ost_clocks;
+	}
+
+	ingenic_ost = ost;
+
+	return 0;
+
+err_unregister_ost_clocks:
+	for (i = 0; i < ost->clocks->num; i++)
+		if (ost->clocks->hws[i])
+			clk_hw_unregister(ost->clocks->hws[i]);
+	kfree(ost->clocks);
+err_clk_disable:
+	clk_disable_unprepare(ost->clk);
+err_put_clk:
+	clk_put(ost->clk);
+err_free_ost:
+	kfree(ost);
+	return ret;
+}
+
+static int __init ingenic_ost_init(struct device_node *np)
+{
+	struct ingenic_ost *ost;
+	unsigned long rate;
+	int ret;
+
+	ret = ingenic_ost_probe(np);
+	if (ret) {
+		pr_crit("%s: Failed to initialize OST clocks: %d\n", __func__, ret);
+		return ret;
+	}
+
+	of_node_clear_flag(np, OF_POPULATED);
+
+	ost = ingenic_ost;
+	if (IS_ERR(ost))
+		return PTR_ERR(ost);
+
+	ret = ingenic_ost_global_timer_init(np, ost);
+	if (ret) {
+		pr_crit("%s: Unable to init global timer: %x\n", __func__, ret);
+		goto err_free_ingenic_ost;
+	}
+
+	ret = ingenic_ost_percpu_timer_init(np, ost);
+	if (ret)
+		goto err_ost_global_timer_cleanup;
+
+	/* Register the sched_clock at the end as there's no way to undo it */
+	rate = clk_get_rate(ost->global_timer_clk);
+	sched_clock_register(ingenic_ost_global_timer_read_cntl, 32, rate);
+
+	return 0;
+
+err_ost_global_timer_cleanup:
+	clocksource_unregister(&ost->cs);
+	clk_disable_unprepare(ost->global_timer_clk);
+	clk_put(ost->global_timer_clk);
+err_free_ingenic_ost:
+	kfree(ost);
+	return ret;
+}
+
+TIMER_OF_DECLARE(x1000_ost,  "ingenic,x1000-ost",  ingenic_ost_init);
diff --git a/drivers/clocksource/ingenic-timer.c b/drivers/clocksource/ingenic-timer.c
index 496333650de2..58fd9189fab7 100644
--- a/drivers/clocksource/ingenic-timer.c
+++ b/drivers/clocksource/ingenic-timer.c
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * JZ47xx SoCs TCU IRQ driver
+ * Ingenic SoCs TCU IRQ driver
  * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ * Copyright (C) 2020 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
  */
 
 #include <linux/bitops.h>
@@ -15,24 +16,35 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/overflow.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/sched_clock.h>
 
 #include <dt-bindings/clock/ingenic,tcu.h>
 
+static DEFINE_PER_CPU(call_single_data_t, ingenic_cevt_csd);
+
 struct ingenic_soc_info {
 	unsigned int num_channels;
 };
 
+struct ingenic_tcu_timer {
+	unsigned int cpu;
+	unsigned int channel;
+	struct clock_event_device cevt;
+	struct clk *clk;
+	char name[8];
+};
+
 struct ingenic_tcu {
 	struct regmap *map;
-	struct clk *timer_clk, *cs_clk;
-	unsigned int timer_channel, cs_channel;
-	struct clock_event_device cevt;
+	struct device_node *np;
+	struct clk *cs_clk;
+	unsigned int cs_channel;
 	struct clocksource cs;
-	char name[4];
 	unsigned long pwm_channels_mask;
+	struct ingenic_tcu_timer timers[];
 };
 
 static struct ingenic_tcu *ingenic_tcu;
@@ -52,16 +64,24 @@ static u64 notrace ingenic_tcu_timer_cs_read(struct clocksource *cs)
 	return ingenic_tcu_timer_read();
 }
 
-static inline struct ingenic_tcu *to_ingenic_tcu(struct clock_event_device *evt)
+static inline struct ingenic_tcu *
+to_ingenic_tcu(struct ingenic_tcu_timer *timer)
+{
+	return container_of(timer, struct ingenic_tcu, timers[timer->cpu]);
+}
+
+static inline struct ingenic_tcu_timer *
+to_ingenic_tcu_timer(struct clock_event_device *evt)
 {
-	return container_of(evt, struct ingenic_tcu, cevt);
+	return container_of(evt, struct ingenic_tcu_timer, cevt);
 }
 
 static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
 {
-	struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+	struct ingenic_tcu_timer *timer = to_ingenic_tcu_timer(evt);
+	struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
 
-	regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel));
+	regmap_write(tcu->map, TCU_REG_TECR, BIT(timer->channel));
 
 	return 0;
 }
@@ -69,27 +89,40 @@ static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
 static int ingenic_tcu_cevt_set_next(unsigned long next,
 				     struct clock_event_device *evt)
 {
-	struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+	struct ingenic_tcu_timer *timer = to_ingenic_tcu_timer(evt);
+	struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
 
 	if (next > 0xffff)
 		return -EINVAL;
 
-	regmap_write(tcu->map, TCU_REG_TDFRc(tcu->timer_channel), next);
-	regmap_write(tcu->map, TCU_REG_TCNTc(tcu->timer_channel), 0);
-	regmap_write(tcu->map, TCU_REG_TESR, BIT(tcu->timer_channel));
+	regmap_write(tcu->map, TCU_REG_TDFRc(timer->channel), next);
+	regmap_write(tcu->map, TCU_REG_TCNTc(timer->channel), 0);
+	regmap_write(tcu->map, TCU_REG_TESR, BIT(timer->channel));
 
 	return 0;
 }
 
+static void ingenic_per_cpu_event_handler(void *info)
+{
+	struct clock_event_device *cevt = (struct clock_event_device *) info;
+
+	cevt->event_handler(cevt);
+}
+
 static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = dev_id;
-	struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+	struct ingenic_tcu_timer *timer = dev_id;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
+	call_single_data_t *csd;
 
-	regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel));
+	regmap_write(tcu->map, TCU_REG_TECR, BIT(timer->channel));
 
-	if (evt->event_handler)
-		evt->event_handler(evt);
+	if (timer->cevt.event_handler) {
+		csd = &per_cpu(ingenic_cevt_csd, timer->cpu);
+		csd->info = (void *) &timer->cevt;
+		csd->func = ingenic_per_cpu_event_handler;
+		smp_call_function_single_async(timer->cpu, csd);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -105,64 +138,66 @@ static struct clk * __init ingenic_tcu_get_clock(struct device_node *np, int id)
 	return of_clk_get_from_provider(&args);
 }
 
-static int __init ingenic_tcu_timer_init(struct device_node *np,
-					 struct ingenic_tcu *tcu)
+static int ingenic_tcu_setup_cevt(unsigned int cpu)
 {
-	unsigned int timer_virq, channel = tcu->timer_channel;
+	struct ingenic_tcu *tcu = ingenic_tcu;
+	struct ingenic_tcu_timer *timer = &tcu->timers[cpu];
+	unsigned int timer_virq;
 	struct irq_domain *domain;
 	unsigned long rate;
 	int err;
 
-	tcu->timer_clk = ingenic_tcu_get_clock(np, channel);
-	if (IS_ERR(tcu->timer_clk))
-		return PTR_ERR(tcu->timer_clk);
+	timer->clk = ingenic_tcu_get_clock(tcu->np, timer->channel);
+	if (IS_ERR(timer->clk))
+		return PTR_ERR(timer->clk);
 
-	err = clk_prepare_enable(tcu->timer_clk);
+	err = clk_prepare_enable(timer->clk);
 	if (err)
 		goto err_clk_put;
 
-	rate = clk_get_rate(tcu->timer_clk);
+	rate = clk_get_rate(timer->clk);
 	if (!rate) {
 		err = -EINVAL;
 		goto err_clk_disable;
 	}
 
-	domain = irq_find_host(np);
+	domain = irq_find_host(tcu->np);
 	if (!domain) {
 		err = -ENODEV;
 		goto err_clk_disable;
 	}
 
-	timer_virq = irq_create_mapping(domain, channel);
+	timer_virq = irq_create_mapping(domain, timer->channel);
 	if (!timer_virq) {
 		err = -EINVAL;
 		goto err_clk_disable;
 	}
 
-	snprintf(tcu->name, sizeof(tcu->name), "TCU");
+	snprintf(timer->name, sizeof(timer->name), "TCU%u", timer->channel);
 
 	err = request_irq(timer_virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
-			  tcu->name, &tcu->cevt);
+			  timer->name, timer);
 	if (err)
 		goto err_irq_dispose_mapping;
 
-	tcu->cevt.cpumask = cpumask_of(smp_processor_id());
-	tcu->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
-	tcu->cevt.name = tcu->name;
-	tcu->cevt.rating = 200;
-	tcu->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
-	tcu->cevt.set_next_event = ingenic_tcu_cevt_set_next;
+	timer->cpu = smp_processor_id();
+	timer->cevt.cpumask = cpumask_of(smp_processor_id());
+	timer->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+	timer->cevt.name = timer->name;
+	timer->cevt.rating = 200;
+	timer->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
+	timer->cevt.set_next_event = ingenic_tcu_cevt_set_next;
 
-	clockevents_config_and_register(&tcu->cevt, rate, 10, 0xffff);
+	clockevents_config_and_register(&timer->cevt, rate, 10, 0xffff);
 
 	return 0;
 
 err_irq_dispose_mapping:
 	irq_dispose_mapping(timer_virq);
 err_clk_disable:
-	clk_disable_unprepare(tcu->timer_clk);
+	clk_disable_unprepare(timer->clk);
 err_clk_put:
-	clk_put(tcu->timer_clk);
+	clk_put(timer->clk);
 	return err;
 }
 
@@ -238,10 +273,12 @@ static int __init ingenic_tcu_init(struct device_node *np)
 {
 	const struct of_device_id *id = of_match_node(ingenic_tcu_of_match, np);
 	const struct ingenic_soc_info *soc_info = id->data;
+	struct ingenic_tcu_timer *timer;
 	struct ingenic_tcu *tcu;
 	struct regmap *map;
+	unsigned int cpu;
+	int ret, last_bit = -1;
 	long rate;
-	int ret;
 
 	of_node_clear_flag(np, OF_POPULATED);
 
@@ -249,17 +286,23 @@ static int __init ingenic_tcu_init(struct device_node *np)
 	if (IS_ERR(map))
 		return PTR_ERR(map);
 
-	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	tcu = kzalloc(struct_size(tcu, timers, num_possible_cpus()),
+		      GFP_KERNEL);
 	if (!tcu)
 		return -ENOMEM;
 
-	/* Enable all TCU channels for PWM use by default except channels 0/1 */
-	tcu->pwm_channels_mask = GENMASK(soc_info->num_channels - 1, 2);
+	/*
+	 * Enable all TCU channels for PWM use by default except channels 0/1,
+	 * and channel 2 if target CPU is JZ4780/X2000 and SMP is selected.
+	 */
+	tcu->pwm_channels_mask = GENMASK(soc_info->num_channels - 1,
+					 num_possible_cpus() + 1);
 	of_property_read_u32(np, "ingenic,pwm-channels-mask",
 			     (u32 *)&tcu->pwm_channels_mask);
 
-	/* Verify that we have at least two free channels */
-	if (hweight8(tcu->pwm_channels_mask) > soc_info->num_channels - 2) {
+	/* Verify that we have at least num_possible_cpus() + 1 free channels */
+	if (hweight8(tcu->pwm_channels_mask) >
+			soc_info->num_channels - num_possible_cpus() + 1) {
 		pr_crit("%s: Invalid PWM channel mask: 0x%02lx\n", __func__,
 			tcu->pwm_channels_mask);
 		ret = -EINVAL;
@@ -267,13 +310,22 @@ static int __init ingenic_tcu_init(struct device_node *np)
 	}
 
 	tcu->map = map;
+	tcu->np = np;
 	ingenic_tcu = tcu;
 
-	tcu->timer_channel = find_first_zero_bit(&tcu->pwm_channels_mask,
-						 soc_info->num_channels);
+	for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
+		timer = &tcu->timers[cpu];
+
+		timer->cpu = cpu;
+		timer->channel = find_next_zero_bit(&tcu->pwm_channels_mask,
+						  soc_info->num_channels,
+						  last_bit + 1);
+		last_bit = timer->channel;
+	}
+
 	tcu->cs_channel = find_next_zero_bit(&tcu->pwm_channels_mask,
 					     soc_info->num_channels,
-					     tcu->timer_channel + 1);
+					     last_bit + 1);
 
 	ret = ingenic_tcu_clocksource_init(np, tcu);
 	if (ret) {
@@ -281,9 +333,13 @@ static int __init ingenic_tcu_init(struct device_node *np)
 		goto err_free_ingenic_tcu;
 	}
 
-	ret = ingenic_tcu_timer_init(np, tcu);
-	if (ret)
+	/* Setup clock events on each CPU core */
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "Ingenic XBurst: online",
+				ingenic_tcu_setup_cevt, NULL);
+	if (ret < 0) {
+		pr_crit("%s: Unable to start CPU timers: %d\n", __func__, ret);
 		goto err_tcu_clocksource_cleanup;
+	}
 
 	/* Register the sched_clock at the end as there's no way to undo it */
 	rate = clk_get_rate(tcu->cs_clk);
@@ -315,28 +371,38 @@ static int __init ingenic_tcu_probe(struct platform_device *pdev)
 static int __maybe_unused ingenic_tcu_suspend(struct device *dev)
 {
 	struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+	unsigned int cpu;
 
 	clk_disable(tcu->cs_clk);
-	clk_disable(tcu->timer_clk);
+
+	for (cpu = 0; cpu < num_online_cpus(); cpu++)
+		clk_disable(tcu->timers[cpu].clk);
+
 	return 0;
 }
 
 static int __maybe_unused ingenic_tcu_resume(struct device *dev)
 {
 	struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+	unsigned int cpu;
 	int ret;
 
-	ret = clk_enable(tcu->timer_clk);
-	if (ret)
-		return ret;
+	for (cpu = 0; cpu < num_online_cpus(); cpu++) {
+		ret = clk_enable(tcu->timers[cpu].clk);
+		if (ret)
+			goto err_timer_clk_disable;
+	}
 
 	ret = clk_enable(tcu->cs_clk);
-	if (ret) {
-		clk_disable(tcu->timer_clk);
-		return ret;
-	}
+	if (ret)
+		goto err_timer_clk_disable;
 
 	return 0;
+
+err_timer_clk_disable:
+	for (; cpu > 0; cpu--)
+		clk_disable(tcu->timers[cpu - 1].clk);
+	return ret;
 }
 
 static const struct dev_pm_ops __maybe_unused ingenic_tcu_pm_ops = {
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index f49a631d8f58..1cf3304652d6 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -186,6 +186,7 @@ static int __init nmdk_timer_init(void __iomem *base, int irq,
 {
 	unsigned long rate;
 	int ret;
+	int min_ticks;
 
 	mtu_base = base;
 
@@ -194,7 +195,8 @@ static int __init nmdk_timer_init(void __iomem *base, int irq,
 
 	/*
 	 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
-	 * for ux500.
+	 * for ux500, and in one specific Ux500 case 32768 Hz.
+	 *
 	 * Use a divide-by-16 counter if the tick rate is more than 32MHz.
 	 * At 32 MHz, the timer (with 32 bit counter) can be programmed
 	 * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
@@ -230,7 +232,12 @@ static int __init nmdk_timer_init(void __iomem *base, int irq,
 		pr_err("%s: request_irq() failed\n", "Nomadik Timer Tick");
 	nmdk_clkevt.cpumask = cpumask_of(0);
 	nmdk_clkevt.irq = irq;
-	clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
+	if (rate < 100000)
+		min_ticks = 5;
+	else
+		min_ticks = 2;
+	clockevents_config_and_register(&nmdk_clkevt, rate, min_ticks,
+					0xffffffffU);
 
 	mtu_delay_timer.read_current_timer = &nmdk_timer_read_current_timer;
 	mtu_delay_timer.freq = rate;
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 12ac75f7571f..760777458a90 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -349,7 +349,7 @@ static int sh_cmt_enable(struct sh_cmt_channel *ch)
 
 	/*
 	 * According to the sh73a0 user's manual, as CMCNT can be operated
-	 * only by the RCLK (Pseudo 32 KHz), there's one restriction on
+	 * only by the RCLK (Pseudo 32 kHz), there's one restriction on
 	 * modifying CMCNT register; two RCLK cycles are necessary before
 	 * this register is either read or any modification of the value
 	 * it holds is reflected in the LSI's actual operation.
diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c
index 7427b07495a8..787dbebbb432 100644
--- a/drivers/clocksource/timer-atmel-tcb.c
+++ b/drivers/clocksource/timer-atmel-tcb.c
@@ -27,9 +27,10 @@
  *   - Some chips support 32 bit counter. A single channel is used for
  *     this 32 bit free-running counter. the second channel is not used.
  *
- *   - The third channel may be used to provide a 16-bit clockevent
- *     source, used in either periodic or oneshot mode.  This runs
- *     at 32 KiHZ, and can handle delays of up to two seconds.
+ *   - The third channel may be used to provide a clockevent source, used in
+ *   either periodic or oneshot mode. For 16-bit counter its runs at 32 KiHZ,
+ *   and can handle delays of up to two seconds. For 32-bit counters, it runs at
+ *   the same rate as the clocksource
  *
  * REVISIT behavior during system suspend states... we should disable
  * all clocks and save the power.  Easily done for clockevent devices,
@@ -47,6 +48,8 @@ static struct
 } tcb_cache[3];
 static u32 bmr_cache;
 
+static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128 };
+
 static u64 tc_get_cycles(struct clocksource *cs)
 {
 	unsigned long	flags;
@@ -143,6 +146,7 @@ static unsigned long notrace tc_delay_timer_read32(void)
 struct tc_clkevt_device {
 	struct clock_event_device	clkevt;
 	struct clk			*clk;
+	u32				rate;
 	void __iomem			*regs;
 };
 
@@ -151,13 +155,6 @@ static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt)
 	return container_of(clkevt, struct tc_clkevt_device, clkevt);
 }
 
-/* For now, we always use the 32K clock ... this optimizes for NO_HZ,
- * because using one of the divided clocks would usually mean the
- * tick rate can never be less than several dozen Hz (vs 0.5 Hz).
- *
- * A divided clock could be good for high resolution timers, since
- * 30.5 usec resolution can seem "low".
- */
 static u32 timer_clock;
 
 static int tc_shutdown(struct clock_event_device *d)
@@ -183,7 +180,7 @@ static int tc_set_oneshot(struct clock_event_device *d)
 
 	clk_enable(tcd->clk);
 
-	/* slow clock, count up to RC, then irq and stop */
+	/* count up to RC, then irq and stop */
 	writel(timer_clock | ATMEL_TC_CPCSTOP | ATMEL_TC_WAVE |
 		     ATMEL_TC_WAVESEL_UP_AUTO, regs + ATMEL_TC_REG(2, CMR));
 	writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
@@ -205,10 +202,10 @@ static int tc_set_periodic(struct clock_event_device *d)
 	 */
 	clk_enable(tcd->clk);
 
-	/* slow clock, count up to RC, then irq and restart */
+	/* count up to RC, then irq and restart */
 	writel(timer_clock | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
 		     regs + ATMEL_TC_REG(2, CMR));
-	writel((32768 + HZ / 2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
+	writel((tcd->rate + HZ / 2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
 
 	/* Enable clock and interrupts on RC compare */
 	writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
@@ -256,47 +253,55 @@ static irqreturn_t ch2_irq(int irq, void *handle)
 	return IRQ_NONE;
 }
 
-static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
+static int __init setup_clkevents(struct atmel_tc *tc, int divisor_idx)
 {
 	int ret;
 	struct clk *t2_clk = tc->clk[2];
 	int irq = tc->irq[2];
-
-	ret = clk_prepare_enable(tc->slow_clk);
-	if (ret)
-		return ret;
+	int bits = tc->tcb_config->counter_width;
 
 	/* try to enable t2 clk to avoid future errors in mode change */
 	ret = clk_prepare_enable(t2_clk);
-	if (ret) {
-		clk_disable_unprepare(tc->slow_clk);
+	if (ret)
 		return ret;
-	}
-
-	clk_disable(t2_clk);
 
 	clkevt.regs = tc->regs;
 	clkevt.clk = t2_clk;
 
-	timer_clock = clk32k_divisor_idx;
+	if (bits == 32) {
+		timer_clock = divisor_idx;
+		clkevt.rate = clk_get_rate(t2_clk) / atmel_tcb_divisors[divisor_idx];
+	} else {
+		ret = clk_prepare_enable(tc->slow_clk);
+		if (ret) {
+			clk_disable_unprepare(t2_clk);
+			return ret;
+		}
+
+		clkevt.rate = clk_get_rate(tc->slow_clk);
+		timer_clock = ATMEL_TC_TIMER_CLOCK5;
+	}
+
+	clk_disable(t2_clk);
 
 	clkevt.clkevt.cpumask = cpumask_of(0);
 
 	ret = request_irq(irq, ch2_irq, IRQF_TIMER, "tc_clkevt", &clkevt);
 	if (ret) {
 		clk_unprepare(t2_clk);
-		clk_disable_unprepare(tc->slow_clk);
+		if (bits != 32)
+			clk_disable_unprepare(tc->slow_clk);
 		return ret;
 	}
 
-	clockevents_config_and_register(&clkevt.clkevt, 32768, 1, 0xffff);
+	clockevents_config_and_register(&clkevt.clkevt, clkevt.rate, 1, BIT(bits) - 1);
 
 	return ret;
 }
 
 #else /* !CONFIG_GENERIC_CLOCKEVENTS */
 
-static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
+static int __init setup_clkevents(struct atmel_tc *tc, int divisor_idx)
 {
 	/* NOTHING */
 	return 0;
@@ -346,11 +351,23 @@ static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_id
 	writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
 }
 
-static const u8 atmel_tcb_divisors[5] = { 2, 8, 32, 128, 0, };
+static struct atmel_tcb_config tcb_rm9200_config = {
+	.counter_width = 16,
+};
+
+static struct atmel_tcb_config tcb_sam9x5_config = {
+	.counter_width = 32,
+};
+
+static struct atmel_tcb_config tcb_sama5d2_config = {
+	.counter_width = 32,
+	.has_gclk = 1,
+};
 
 static const struct of_device_id atmel_tcb_of_match[] = {
-	{ .compatible = "atmel,at91rm9200-tcb", .data = (void *)16, },
-	{ .compatible = "atmel,at91sam9x5-tcb", .data = (void *)32, },
+	{ .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
+	{ .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
+	{ .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
 	{ /* sentinel */ }
 };
 
@@ -362,7 +379,6 @@ static int __init tcb_clksrc_init(struct device_node *node)
 	u64 (*tc_sched_clock)(void);
 	u32 rate, divided_rate = 0;
 	int best_divisor_idx = -1;
-	int clk32k_divisor_idx = -1;
 	int bits;
 	int i;
 	int ret;
@@ -399,7 +415,11 @@ static int __init tcb_clksrc_init(struct device_node *node)
 	}
 
 	match = of_match_node(atmel_tcb_of_match, node->parent);
-	bits = (uintptr_t)match->data;
+	if (!match)
+		return -ENODEV;
+
+	tc.tcb_config = match->data;
+	bits = tc.tcb_config->counter_width;
 
 	for (i = 0; i < ARRAY_SIZE(tc.irq); i++)
 		writel(ATMEL_TC_ALL_IRQ, tc.regs + ATMEL_TC_REG(i, IDR));
@@ -412,22 +432,17 @@ static int __init tcb_clksrc_init(struct device_node *node)
 
 	/* How fast will we be counting?  Pick something over 5 MHz.  */
 	rate = (u32) clk_get_rate(t0_clk);
-	for (i = 0; i < ARRAY_SIZE(atmel_tcb_divisors); i++) {
+	i = 0;
+	if (tc.tcb_config->has_gclk)
+		i = 1;
+	for (; i < ARRAY_SIZE(atmel_tcb_divisors); i++) {
 		unsigned divisor = atmel_tcb_divisors[i];
 		unsigned tmp;
 
-		/* remember 32 KiHz clock for later */
-		if (!divisor) {
-			clk32k_divisor_idx = i;
-			continue;
-		}
-
 		tmp = rate / divisor;
 		pr_debug("TC: %u / %-3u [%d] --> %u\n", rate, divisor, i, tmp);
-		if (best_divisor_idx > 0) {
-			if (tmp < 5 * 1000 * 1000)
-				continue;
-		}
+		if ((best_divisor_idx >= 0) && (tmp < 5 * 1000 * 1000))
+			break;
 		divided_rate = tmp;
 		best_divisor_idx = i;
 	}
@@ -467,7 +482,7 @@ static int __init tcb_clksrc_init(struct device_node *node)
 		goto err_disable_t1;
 
 	/* channel 2:  periodic and oneshot timer support */
-	ret = setup_clkevents(&tc, clk32k_divisor_idx);
+	ret = setup_clkevents(&tc, best_divisor_idx);
 	if (ret)
 		goto err_unregister_clksrc;
 
diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c
index ae12bbf3d68c..59b0be482f32 100644
--- a/drivers/clocksource/timer-ti-32k.c
+++ b/drivers/clocksource/timer-ti-32k.c
@@ -21,7 +21,7 @@
  * Roughly modelled after the OMAP1 MPU timer code.
  * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com
  */
 
 #include <linux/clk.h>
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
index 60aff087947a..33eeabf9c3d1 100644
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -4,7 +4,7 @@
  *
  * OMAP Dual-Mode Timers
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  * Tarun Kanti DebBarma <tarun.kanti@ti.com>
  * Thara Gopinath <thara@ti.com>
  *
diff --git a/include/dt-bindings/clock/ingenic,sysost.h b/include/dt-bindings/clock/ingenic,sysost.h
new file mode 100644
index 000000000000..9ac88e90babf
--- /dev/null
+++ b/include/dt-bindings/clock/ingenic,sysost.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,tcu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_INGENIC_OST_H__
+#define __DT_BINDINGS_CLOCK_INGENIC_OST_H__
+
+#define OST_CLK_PERCPU_TIMER	0
+#define OST_CLK_GLOBAL_TIMER	1
+
+#endif /* __DT_BINDINGS_CLOCK_INGENIC_OST_H__ */
diff --git a/include/soc/at91/atmel_tcb.h b/include/soc/at91/atmel_tcb.h
index c3c7200ce151..1d7071dc0bca 100644
--- a/include/soc/at91/atmel_tcb.h
+++ b/include/soc/at91/atmel_tcb.h
@@ -36,9 +36,14 @@ struct clk;
 /**
  * struct atmel_tcb_config - SoC data for a Timer/Counter Block
  * @counter_width: size in bits of a timer counter register
+ * @has_gclk: boolean indicating if a timer counter has a generic clock
+ * @has_qdec: boolean indicating if a timer counter has a quadrature
+ * decoder.
  */
 struct atmel_tcb_config {
 	size_t	counter_width;
+	bool    has_gclk;
+	bool    has_qdec;
 };
 
 /**