Merge branch 'regulator-4.19' into regulator-next

49 files changed, 4163 insertions, 269 deletions

diff --git a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
new file mode 100644
index 000000000000..4d63a7904b94
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
@@ -0,0 +1,27 @@
+What:		/sys/bus/i2c/devices/.../bd9571mwv-regulator.*.auto/backup_mode
+Date:		Jul 2018
+KernelVersion:	4.19
+Contact:	Geert Uytterhoeven <geert+renesas@glider.be>
+Description:	Read/write the current state of DDR Backup Mode, which controls
+		if DDR power rails will be kept powered during system suspend.
+		("on"/"1" = enabled, "off"/"0" = disabled).
+		Two types of power switches (or control signals) can be used:
+		  A. With a momentary power switch (or pulse signal), DDR
+		     Backup Mode is enabled by default when available, as the
+		     PMIC will be configured only during system suspend.
+		  B. With a toggle power switch (or level signal), the
+		     following steps must be followed exactly:
+		       1. Configure PMIC for backup mode, to change the role of
+			  the accessory power switch from a power switch to a
+			  wake-up switch,
+		       2. Switch accessory power switch off, to prepare for
+			  system suspend, which is a manual step not controlled
+			  by software,
+		       3. Suspend system,
+		       4. Switch accessory power switch on, to resume the
+			  system.
+		     DDR Backup Mode must be explicitly enabled by the user,
+		     to invoke step 1.
+		See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt.
+Users:		User space applications for embedded boards equipped with a
+		BD9571MWV PMIC.
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
new file mode 100644
index 000000000000..5e85749262ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
@@ -0,0 +1,26 @@
+== Introduction==
+
+LLCC (Last Level Cache Controller) provides last level of cache memory in SOC,
+that can be shared by multiple clients. Clients here are different cores in the
+SOC, the idea is to minimize the local caches at the clients and migrate to
+common pool of memory. Cache memory is divided into partitions called slices
+which are assigned to clients. Clients can query the slice details, activate
+and deactivate them.
+
+Properties:
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,sdm845-llcc"
+
+- reg:
+	Usage: required
+	Value Type: <prop-encoded-array>
+	Definition: Start address and the the size of the register region.
+
+Example:
+
+	cache-controller@1100000 {
+		compatible = "qcom,sdm845-llcc";
+		reg = <0x1100000 0x250000>;
+	};
diff --git a/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
index 675f4437ce92..36f5e2f5cc0f 100644
--- a/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
@@ -5,6 +5,7 @@ Requires node properties:
 - "compatible" value one of:
     "motorola,cpcap-regulator"
     "motorola,mapphone-cpcap-regulator"
+    "motorola,xoom-cpcap-regulator"
 
 Required regulator properties:
 - "regulator-name"
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index f0ada3b14d70..c7610718adff 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -1,9 +1,18 @@
 PFUZE100 family of regulators
 
 Required properties:
-- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
+- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000", "fsl,pfuze3001"
 - reg: I2C slave address
 
+Optional properties:
+- fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch
+  regulators to save power consumption. Attention, ensure that all important
+  regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on"
+  property. If not present, the switched regualtors are always on and can't be
+  disabled. This binding is a workaround to keep backward compatibility with
+  old dtb's which rely on the fact that the switched regulators are always on
+  and don't mark them explicit as "regulator-always-on".
+
 Required child node:
 - regulators: This is the list of child nodes that specify the regulator
   initialization data for defined regulators. Please refer to below doc
@@ -16,6 +25,8 @@ Required child node:
   sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
   --PFUZE3000
   sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
+  --PFUZE3001
+  sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4
 
 Each regulator is defined using the standard binding for regulators.
 
@@ -303,3 +314,76 @@ Example 3: PFUZE3000
 			};
 		};
 	};
+
+Example 4: PFUZE 3001
+
+	pfuze3001: pmic@8 {
+		compatible = "fsl,pfuze3001";
+		reg = <0x08>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
new file mode 100644
index 000000000000..7ef2dbe48e8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
@@ -0,0 +1,160 @@
+Qualcomm Technologies, Inc. RPMh Regulators
+
+rpmh-regulator devices support PMIC regulator management via the Voltage
+Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators.  The APPS
+processor communicates with these hardware blocks via a Resource State
+Coordinator (RSC) using command packets.  The VRM allows changing three
+parameters for a given regulator: enable state, output voltage, and operating
+mode.  The XOB allows changing only a single parameter for a given regulator:
+its enable state.  Despite its name, the XOB is capable of controlling the
+enable state of any PMIC peripheral.  It is used for clock buffers, low-voltage
+switches, and LDO/SMPS regulators which have a fixed voltage and mode.
+
+=======================
+Required Node Structure
+=======================
+
+RPMh regulators must be described in two levels of device nodes.  The first
+level describes the PMIC containing the regulators and must reside within an
+RPMh device node.  The second level describes each regulator within the PMIC
+which is to be used on the board.  Each of these regulators maps to a single
+RPMh resource.
+
+The names used for regulator nodes must match those supported by a given PMIC.
+Supported regulator node names:
+	PM8998:		smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
+	PMI8998:	bob
+	PM8005:		smps1 - smps4
+
+========================
+First Level Nodes - PMIC
+========================
+
+- compatible
+	Usage:      required
+	Value type: <string>
+	Definition: Must be one of: "qcom,pm8998-rpmh-regulators",
+		    "qcom,pmi8998-rpmh-regulators" or
+		    "qcom,pm8005-rpmh-regulators".
+
+- qcom,pmic-id
+	Usage:      required
+	Value type: <string>
+	Definition: RPMh resource name suffix used for the regulators found on
+		    this PMIC.  Typical values: "a", "b", "c", "d", "e", "f".
+
+- vdd-s1-supply
+- vdd-s2-supply
+- vdd-s3-supply
+- vdd-s4-supply
+	Usage:      optional (PM8998 and PM8005 only)
+	Value type: <phandle>
+	Definition: phandle of the parent supply regulator of one or more of the
+		    regulators for this PMIC.
+
+- vdd-s5-supply
+- vdd-s6-supply
+- vdd-s7-supply
+- vdd-s8-supply
+- vdd-s9-supply
+- vdd-s10-supply
+- vdd-s11-supply
+- vdd-s12-supply
+- vdd-s13-supply
+- vdd-l1-l27-supply
+- vdd-l2-l8-l17-supply
+- vdd-l3-l11-supply
+- vdd-l4-l5-supply
+- vdd-l6-supply
+- vdd-l7-l12-l14-l15-supply
+- vdd-l9-supply
+- vdd-l10-l23-l25-supply
+- vdd-l13-l19-l21-supply
+- vdd-l16-l28-supply
+- vdd-l18-l22-supply
+- vdd-l20-l24-supply
+- vdd-l26-supply
+- vin-lvs-1-2-supply
+	Usage:      optional (PM8998 only)
+	Value type: <phandle>
+	Definition: phandle of the parent supply regulator of one or more of the
+		    regulators for this PMIC.
+
+- vdd-bob-supply
+	Usage:      optional (PMI8998 only)
+	Value type: <phandle>
+	Definition: BOB regulator parent supply phandle
+
+===============================
+Second Level Nodes - Regulators
+===============================
+
+- qcom,always-wait-for-ack
+	Usage:      optional
+	Value type: <empty>
+	Definition: Boolean flag which indicates that the application processor
+		    must wait for an ACK or a NACK from RPMh for every request
+		    sent for this regulator including those which are for a
+		    strictly lower power state.
+
+Other properties defined in Documentation/devicetree/bindings/regulator.txt
+may also be used.  regulator-initial-mode and regulator-allowed-modes may be
+specified for VRM regulators using mode values from
+include/dt-bindings/regulator/qcom,rpmh-regulator.h.  regulator-allow-bypass
+may be specified for BOB type regulators managed via VRM.
+regulator-allow-set-load may be specified for LDO type regulators managed via
+VRM.
+
+========
+Examples
+========
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+&apps_rsc {
+	pm8998-rpmh-regulators {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-l7-l12-l14-l15-supply = <&pm8998_s5>;
+
+		smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8998_s5: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	pmi8998-rpmh-regulators {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-allowed-modes =
+				<RPMH_REGULATOR_MODE_AUTO
+				 RPMH_REGULATOR_MODE_HPM>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
index 4edf3137d9f7..76ead07072b1 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
@@ -1,13 +1,5 @@
 ROHM BD71837 Power Management Integrated Circuit (PMIC) regulator bindings
 
-BD71837MWV is a programmable Power Management
-IC (PMIC) for powering single-core, dual-core, and
-quad-core SoC’s such as NXP-i.MX 8M. It is optimized
-for low BOM cost and compact solution footprint. It
-integrates 8 Buck regulators and 7 LDO’s to provide all
-the power rails required by the SoC and the commonly
-used peripherals.
-
 Required properties:
  - regulator-name: should be "buck1", ..., "buck8" and "ldo1", ..., "ldo7"
 
diff --git a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
new file mode 100644
index 000000000000..c9919f4b92d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
@@ -0,0 +1,57 @@
+Socionext UniPhier Regulator Controller
+
+This describes the devicetree bindings for regulator controller implemented
+on Socionext UniPhier SoCs.
+
+USB3 Controller
+---------------
+
+This regulator controls VBUS and belongs to USB3 glue layer. Before using
+the regulator, it is necessary to control the clocks and resets to enable
+this layer. These clocks and resets should be described in each property.
+
+Required properties:
+- compatible: Should be
+    "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
+    "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
+    "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
+    "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
+- reg: Specifies offset and length of the register set for the device.
+- clocks: A list of phandles to the clock gate for USB3 glue layer.
+	According to the clock-names, appropriate clocks are required.
+- clock-names: Should contain
+    "gio", "link" - for Pro4 SoC
+    "link"        - for others
+- resets: A list of phandles to the reset control for USB3 glue layer.
+	According to the reset-names, appropriate resets are required.
+- reset-names: Should contain
+    "gio", "link" - for Pro4 SoC
+    "link"        - for others
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+Example:
+
+	usb-glue@65b00000 {
+		compatible = "socionext,uniphier-ld20-dwc3-glue",
+			     "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x65b00000 0x400>;
+
+		usb_vbus0: regulators@100 {
+			compatible = "socionext,uniphier-ld20-usb3-regulator";
+			reg = <0x100 0x10>;
+			clock-names = "link";
+			clocks = <&sys_clk 14>;
+			reset-names = "link";
+			resets = <&sys_rst 14>;
+		};
+
+		phy {
+			...
+			phy-supply = <&usb_vbus0>;
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt b/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
new file mode 100644
index 000000000000..9b86d1eff219
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
@@ -0,0 +1,137 @@
+RPMH RSC:
+------------
+
+Resource Power Manager Hardened (RPMH) is the mechanism for communicating with
+the hardened resource accelerators on Qualcomm SoCs. Requests to the resources
+can be written to the Trigger Command Set (TCS)  registers and using a (addr,
+val) pair and triggered. Messages in the TCS are then sent in sequence over an
+internal bus.
+
+The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity
+(Resource State Coordinator a.k.a RSC) that can handle multiple sleep and
+active/wake resource requests. Multiple such DRVs can exist in a SoC and can
+be written to from Linux. The structure of each DRV follows the same template
+with a few variations that are captured by the properties here.
+
+A TCS may be triggered from Linux or triggered by the F/W after all the CPUs
+have powered off to facilitate idle power saving. TCS could be classified as -
+
+	ACTIVE  /* Triggered by Linux */
+	SLEEP   /* Triggered by F/W */
+	WAKE    /* Triggered by F/W */
+	CONTROL /* Triggered by F/W */
+
+The order in which they are described in the DT, should match the hardware
+configuration.
+
+Requests can be made for the state of a resource, when the subsystem is active
+or idle. When all subsystems like Modem, GPU, CPU are idle, the resource state
+will be an aggregate of the sleep votes from each of those subsystems. Clients
+may request a sleep value for their shared resources in addition to the active
+mode requests.
+
+Properties:
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: Should be "qcom,rpmh-rsc".
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: The first register specifies the base address of the
+		    DRV(s). The number of DRVs in the dependent on the RSC.
+	            The tcs-offset specifies the start address of the
+	            TCS in the DRVs.
+
+- reg-names:
+	Usage: required
+	Value type: <string>
+	Definition: Maps the register specified in the reg property. Must be
+	            "drv-0", "drv-1", "drv-2" etc and "tcs-offset". The
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-interrupt>
+	Definition: The interrupt that trips when a message complete/response
+	           is received for this DRV from the accelerators.
+
+- qcom,drv-id:
+	Usage: required
+	Value type: <u32>
+	Definition: The id of the DRV in the RSC block that will be used by
+		    this controller.
+
+- qcom,tcs-config:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: The tuple defining the configuration of TCS.
+	            Must have 2 cells which describe each TCS type.
+	            <type number_of_tcs>.
+	            The order of the TCS must match the hardware
+	            configuration.
+	- Cell #1 (TCS Type): TCS types to be specified -
+	            ACTIVE_TCS
+	            SLEEP_TCS
+	            WAKE_TCS
+	            CONTROL_TCS
+	- Cell #2 (Number of TCS): <u32>
+
+- label:
+	Usage: optional
+	Value type: <string>
+	Definition: Name for the RSC. The name would be used in trace logs.
+
+Drivers that want to use the RSC to communicate with RPMH must specify their
+bindings as child nodes of the RSC controllers they wish to communicate with.
+
+Example 1:
+
+For a TCS whose RSC base address is is 0x179C0000 and is at a DRV id of 2, the
+register offsets for DRV2 start at 0D00, the register calculations are like
+this -
+DRV0: 0x179C0000
+DRV2: 0x179C0000 + 0x10000 = 0x179D0000
+DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000
+TCS-OFFSET: 0xD00
+
+	apps_rsc: rsc@179c0000 {
+		label = "apps_rsc";
+		compatible = "qcom,rpmh-rsc";
+		reg = <0x179c0000 0x10000>,
+		      <0x179d0000 0x10000>,
+		      <0x179e0000 0x10000>;
+		reg-names = "drv-0", "drv-1", "drv-2";
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		qcom,tcs-offset = <0xd00>;
+		qcom,drv-id = <2>;
+		qcom,tcs-config = <ACTIVE_TCS  2>,
+				  <SLEEP_TCS   3>,
+				  <WAKE_TCS    3>,
+				  <CONTROL_TCS 1>;
+	};
+
+Example 2:
+
+For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the
+register offsets for DRV0 start at 01C00, the register calculations are like
+this -
+DRV0: 0xAF20000
+TCS-OFFSET: 0x1C00
+
+	disp_rsc: rsc@af20000 {
+		label = "disp_rsc";
+		compatible = "qcom,rpmh-rsc";
+		reg = <0xaf20000 0x10000>;
+		reg-names = "drv-0";
+		interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+		qcom,tcs-offset = <0x1c00>;
+		qcom,drv-id = <0>;
+		qcom,tcs-config = <ACTIVE_TCS  0>,
+				  <SLEEP_TCS   1>,
+				  <WAKE_TCS    1>,
+				  <CONTROL_TCS 0>;
+	};
diff --git a/drivers/base/core.c b/drivers/base/core.c
index df3e1a44707a..2ab316d85651 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -372,6 +372,36 @@ void device_link_del(struct device_link *link)
 }
 EXPORT_SYMBOL_GPL(device_link_del);
 
+/**
+ * device_link_remove - remove a link between two devices.
+ * @consumer: Consumer end of the link.
+ * @supplier: Supplier end of the link.
+ *
+ * The caller must ensure proper synchronization of this function with runtime
+ * PM.
+ */
+void device_link_remove(void *consumer, struct device *supplier)
+{
+	struct device_link *link;
+
+	if (WARN_ON(consumer == supplier))
+		return;
+
+	device_links_write_lock();
+	device_pm_lock();
+
+	list_for_each_entry(link, &supplier->links.consumers, s_node) {
+		if (link->consumer == consumer) {
+			kref_put(&link->kref, __device_link_del);
+			break;
+		}
+	}
+
+	device_pm_unlock();
+	device_links_write_unlock();
+}
+EXPORT_SYMBOL_GPL(device_link_remove);
+
 static void device_links_missing_supplier(struct device *dev)
 {
 	struct device_link *link;
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5dbccf5f3037..329cdd33ed62 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -180,9 +180,9 @@ config REGULATOR_BCM590XX
 	  BCM590xx PMUs. This will enable support for the software
 	  controllable LDO/Switching regulators.
 
-config REGULATOR_BD71837
+config REGULATOR_BD718XX
 	tristate "ROHM BD71837 Power Regulator"
-	depends on MFD_BD71837
+	depends on MFD_ROHM_BD718XX
 	help
 	  This driver supports voltage regulators on ROHM BD71837 PMIC.
 	  This will enable support for the software controllable buck
@@ -633,12 +633,12 @@ config REGULATOR_PCF50633
 	 on PCF50633
 
 config REGULATOR_PFUZE100
-	tristate "Freescale PFUZE100/200/3000 regulator driver"
+	tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
 	depends on I2C
 	select REGMAP_I2C
 	help
 	  Say y here to support the regulators found on the Freescale
-	  PFUZE100/200/3000 PMIC.
+	  PFUZE100/200/3000/3001 PMIC.
 
 config REGULATOR_PV88060
 	tristate "Powerventure Semiconductor PV88060 regulator"
@@ -682,6 +682,15 @@ config REGULATOR_QCOM_RPM
 	  Qualcomm RPM as a module. The module will be named
 	  "qcom_rpm-regulator".
 
+config REGULATOR_QCOM_RPMH
+	tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
+	depends on QCOM_RPMH || COMPILE_TEST
+	help
+	  This driver supports control of PMIC regulators via the RPMh hardware
+	  block found on Qualcomm Technologies Inc. SoCs.  RPMh regulator
+	  control allows for voting on regulator state between multiple
+	  processors within the SoC.
+
 config REGULATOR_QCOM_SMD_RPM
 	tristate "Qualcomm SMD based RPM regulator driver"
 	depends on QCOM_SMD_RPM
@@ -950,6 +959,14 @@ config REGULATOR_TWL4030
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
+config REGULATOR_UNIPHIER
+	tristate "UniPhier regulator driver"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && MFD_SYSCON
+	default ARCH_UNIPHIER
+	help
+	  Support for regulators implemented on Socionext UniPhier SoCs.
+
 config REGULATOR_VCTRL
 	tristate "Voltage controlled regulators"
 	depends on OF
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bd818ceb7c72..801d9a34a203 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
 obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
 obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
 obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
-obj-$(CONFIG_REGULATOR_BD71837) += bd71837-regulator.o
+obj-$(CONFIG_REGULATOR_BD718XX) += bd71837-regulator.o
 obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
@@ -78,6 +78,7 @@ obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380)	+= mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
@@ -118,6 +119,7 @@ obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
 obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
+obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
 obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
 obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
diff --git a/drivers/regulator/bd71837-regulator.c b/drivers/regulator/bd71837-regulator.c
index 6eae4d0432a2..0f8ac8dec3e1 100644
--- a/drivers/regulator/bd71837-regulator.c
+++ b/drivers/regulator/bd71837-regulator.c
@@ -2,19 +2,18 @@
 // Copyright (C) 2018 ROHM Semiconductors
 // bd71837-regulator.c ROHM BD71837MWV regulator driver
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rohm-bd718x7.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/mfd/bd71837.h>
 #include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
 
 struct bd71837_pmic {
 	struct regulator_desc descs[BD71837_REGULATOR_CNT];
@@ -39,7 +38,7 @@ static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,
 	int id = rdev->desc->id;
 	unsigned int ramp_value = BUCK_RAMPRATE_10P00MV;
 
-	dev_dbg(&(pmic->pdev->dev), "Buck[%d] Set Ramp = %d\n", id + 1,
+	dev_dbg(&pmic->pdev->dev, "Buck[%d] Set Ramp = %d\n", id + 1,
 		ramp_delay);
 	switch (ramp_delay) {
 	case 1 ... 1250:
@@ -73,14 +72,10 @@ static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,
 static int bd71837_set_voltage_sel_restricted(struct regulator_dev *rdev,
 						    unsigned int sel)
 {
-	int ret;
-
-	ret = regulator_is_enabled_regmap(rdev);
-	if (!ret)
-		ret = regulator_set_voltage_sel_regmap(rdev, sel);
-	else if (ret == 1)
-		ret = -EBUSY;
-	return ret;
+	if (regulator_is_enabled_regmap(rdev))
+		return -EBUSY;
+
+	return regulator_set_voltage_sel_regmap(rdev, sel);
 }
 
 static struct regulator_ops bd71837_ldo_regulator_ops = {
@@ -195,7 +190,7 @@ static const struct regulator_linear_range bd71837_ldo1_voltage_ranges[] = {
  * LDO2
  * 0.8 or 0.9V
  */
-const unsigned int ldo_2_volts[] = {
+static const unsigned int ldo_2_volts[] = {
 	900000, 800000
 };
 
@@ -495,7 +490,6 @@ struct reg_init {
 static int bd71837_probe(struct platform_device *pdev)
 {
 	struct bd71837_pmic *pmic;
-	struct bd71837_board *pdata;
 	struct regulator_config config = { 0 };
 	struct reg_init pmic_regulator_inits[] = {
 		{
@@ -548,8 +542,7 @@ static int bd71837_probe(struct platform_device *pdev)
 
 	int i, err;
 
-	pmic = devm_kzalloc(&pdev->dev, sizeof(struct bd71837_pmic),
-			    GFP_KERNEL);
+	pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
 	if (!pmic)
 		return -ENOMEM;
 
@@ -564,7 +557,6 @@ static int bd71837_probe(struct platform_device *pdev)
 		goto err;
 	}
 	platform_set_drvdata(pdev, pmic);
-	pdata = dev_get_platdata(pmic->mfd->dev);
 
 	/* Register LOCK release */
 	err = regmap_update_bits(pmic->mfd->regmap, BD71837_REG_REGLOCK,
@@ -573,8 +565,8 @@ static int bd71837_probe(struct platform_device *pdev)
 		dev_err(&pmic->pdev->dev, "Failed to unlock PMIC (%d)\n", err);
 		goto err;
 	} else {
-		dev_dbg(&pmic->pdev->dev, "%s: Unlocked lock register 0x%x\n",
-			__func__, BD71837_REG_REGLOCK);
+		dev_dbg(&pmic->pdev->dev, "Unlocked lock register 0x%x\n",
+			BD71837_REG_REGLOCK);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) {
@@ -584,9 +576,6 @@ static int bd71837_probe(struct platform_device *pdev)
 
 		desc = &pmic->descs[i];
 
-		if (pdata)
-			config.init_data = pdata->init_data[i];
-
 		config.dev = pdev->dev.parent;
 		config.driver_data = pmic;
 		config.regmap = pmic->mfd->regmap;
@@ -619,8 +608,6 @@ static int bd71837_probe(struct platform_device *pdev)
 		pmic->rdev[i] = rdev;
 	}
 
-	return 0;
-
 err:
 	return err;
 }
@@ -628,7 +615,6 @@ err:
 static struct platform_driver bd71837_regulator = {
 	.driver = {
 		.name = "bd71837-pmic",
-		.owner = THIS_MODULE,
 	},
 	.probe = bd71837_probe,
 };
diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c
index be574eb444eb..274c5ed7cd73 100644
--- a/drivers/regulator/bd9571mwv-regulator.c
+++ b/drivers/regulator/bd9571mwv-regulator.c
@@ -30,6 +30,7 @@ struct bd9571mwv_reg {
 	/* DDR Backup Power */
 	u8 bkup_mode_cnt_keepon;	/* from "rohm,ddr-backup-power" */
 	u8 bkup_mode_cnt_saved;
+	bool bkup_mode_enabled;
 
 	/* Power switch type */
 	bool rstbmode_level;
@@ -171,13 +172,60 @@ static int bd9571mwv_bkup_mode_write(struct bd9571mwv *bd, unsigned int mode)
 	return 0;
 }
 
+static ssize_t backup_mode_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", bdreg->bkup_mode_enabled ? "on" : "off");
+}
+
+static ssize_t backup_mode_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
+	unsigned int mode;
+	int ret;
+
+	if (!count)
+		return 0;
+
+	ret = kstrtobool(buf, &bdreg->bkup_mode_enabled);
+	if (ret)
+		return ret;
+
+	if (!bdreg->rstbmode_level)
+		return count;
+
+	/*
+	 * Configure DDR Backup Mode, to change the role of the accessory power
+	 * switch from a power switch to a wake-up switch, or vice versa
+	 */
+	ret = bd9571mwv_bkup_mode_read(bdreg->bd, &mode);
+	if (ret)
+		return ret;
+
+	mode &= ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK;
+	if (bdreg->bkup_mode_enabled)
+		mode |= bdreg->bkup_mode_cnt_keepon;
+
+	ret = bd9571mwv_bkup_mode_write(bdreg->bd, mode);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(backup_mode);
+
 static int bd9571mwv_suspend(struct device *dev)
 {
 	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
 	unsigned int mode;
 	int ret;
 
-	if (!device_may_wakeup(dev))
+	if (!bdreg->bkup_mode_enabled)
 		return 0;
 
 	/* Save DDR Backup Mode */
@@ -204,7 +252,7 @@ static int bd9571mwv_resume(struct device *dev)
 {
 	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
 
-	if (!device_may_wakeup(dev))
+	if (!bdreg->bkup_mode_enabled)
 		return 0;
 
 	/* Restore DDR Backup Mode */
@@ -215,9 +263,15 @@ static const struct dev_pm_ops bd9571mwv_pm  = {
 	SET_SYSTEM_SLEEP_PM_OPS(bd9571mwv_suspend, bd9571mwv_resume)
 };
 
+static int bd9571mwv_regulator_remove(struct platform_device *pdev)
+{
+	device_remove_file(&pdev->dev, &dev_attr_backup_mode);
+	return 0;
+}
 #define DEV_PM_OPS	&bd9571mwv_pm
 #else
 #define DEV_PM_OPS	NULL
+#define bd9571mwv_regulator_remove	NULL
 #endif /* CONFIG_PM_SLEEP */
 
 static int bd9571mwv_regulator_probe(struct platform_device *pdev)
@@ -270,14 +324,21 @@ static int bd9571mwv_regulator_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+#ifdef CONFIG_PM_SLEEP
 	if (bdreg->bkup_mode_cnt_keepon) {
-		device_set_wakeup_capable(&pdev->dev, true);
+		int ret;
+
 		/*
-		 * Wakeup is enabled by default in pulse mode, but needs
+		 * Backup mode is enabled by default in pulse mode, but needs
 		 * explicit user setup in level mode.
 		 */
-		device_set_wakeup_enable(&pdev->dev, bdreg->rstbmode_pulse);
+		bdreg->bkup_mode_enabled = bdreg->rstbmode_pulse;
+
+		ret = device_create_file(&pdev->dev, &dev_attr_backup_mode);
+		if (ret)
+			return ret;
 	}
+#endif /* CONFIG_PM_SLEEP */
 
 	return 0;
 }
@@ -294,6 +355,7 @@ static struct platform_driver bd9571mwv_regulator_driver = {
 		.pm = DEV_PM_OPS,
 	},
 	.probe = bd9571mwv_regulator_probe,
+	.remove = bd9571mwv_regulator_remove,
 	.id_table = bd9571mwv_regulator_id_table,
 };
 module_platform_driver(bd9571mwv_regulator_driver);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 6ed568b96c0e..bb1324f93143 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1740,6 +1740,8 @@ struct regulator *_regulator_get(struct device *dev, const char *id,
 			rdev->use_count = 0;
 	}
 
+	device_link_add(dev, &rdev->dev, DL_FLAG_STATELESS);
+
 	return regulator;
 }
 
@@ -1829,9 +1831,21 @@ static void _regulator_put(struct regulator *regulator)
 
 	debugfs_remove_recursive(regulator->debugfs);
 
-	/* remove any sysfs entries */
-	if (regulator->dev)
+	if (regulator->dev) {
+		int count = 0;
+		struct regulator *r;
+
+		list_for_each_entry(r, &rdev->consumer_list, list)
+			if (r->dev == regulator->dev)
+				count++;
+
+		if (count == 1)
+			device_link_remove(regulator->dev, &rdev->dev);
+
+		/* remove any sysfs entries */
 		sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
+	}
+
 	regulator_lock(rdev);
 	list_del(&regulator->list);
 
@@ -4441,7 +4455,7 @@ void regulator_unregister(struct regulator_dev *rdev)
 EXPORT_SYMBOL_GPL(regulator_unregister);
 
 #ifdef CONFIG_SUSPEND
-static int _regulator_suspend_late(struct device *dev, void *data)
+static int _regulator_suspend(struct device *dev, void *data)
 {
 	struct regulator_dev *rdev = dev_to_rdev(dev);
 	suspend_state_t *state = data;
@@ -4455,20 +4469,20 @@ static int _regulator_suspend_late(struct device *dev, void *data)
 }
 
 /**
- * regulator_suspend_late - prepare regulators for system wide suspend
+ * regulator_suspend - prepare regulators for system wide suspend
  * @state: system suspend state
  *
  * Configure each regulator with it's suspend operating parameters for state.
  */
-static int regulator_suspend_late(struct device *dev)
+static int regulator_suspend(struct device *dev)
 {
 	suspend_state_t state = pm_suspend_target_state;
 
 	return class_for_each_device(&regulator_class, NULL, &state,
-				     _regulator_suspend_late);
+				     _regulator_suspend);
 }
 
-static int _regulator_resume_early(struct device *dev, void *data)
+static int _regulator_resume(struct device *dev, void *data)
 {
 	int ret = 0;
 	struct regulator_dev *rdev = dev_to_rdev(dev);
@@ -4481,35 +4495,35 @@ static int _regulator_resume_early(struct device *dev, void *data)
 
 	regulator_lock(rdev);
 
-	if (rdev->desc->ops->resume_early &&
+	if (rdev->desc->ops->resume &&
 	    (rstate->enabled == ENABLE_IN_SUSPEND ||
 	     rstate->enabled == DISABLE_IN_SUSPEND))
-		ret = rdev->desc->ops->resume_early(rdev);
+		ret = rdev->desc->ops->resume(rdev);
 
 	regulator_unlock(rdev);
 
 	return ret;
 }
 
-static int regulator_resume_early(struct device *dev)
+static int regulator_resume(struct device *dev)
 {
 	suspend_state_t state = pm_suspend_target_state;
 
 	return class_for_each_device(&regulator_class, NULL, &state,
-				     _regulator_resume_early);
+				     _regulator_resume);
 }
 
 #else /* !CONFIG_SUSPEND */
 
-#define regulator_suspend_late	NULL
-#define regulator_resume_early	NULL
+#define regulator_suspend	NULL
+#define regulator_resume	NULL
 
 #endif /* !CONFIG_SUSPEND */
 
 #ifdef CONFIG_PM
 static const struct dev_pm_ops __maybe_unused regulator_pm_ops = {
-	.suspend_late	= regulator_suspend_late,
-	.resume_early	= regulator_resume_early,
+	.suspend	= regulator_suspend,
+	.resume		= regulator_resume,
 };
 #endif
 
diff --git a/drivers/regulator/cpcap-regulator.c b/drivers/regulator/cpcap-regulator.c
index bd910fe123d9..2131457937b7 100644
--- a/drivers/regulator/cpcap-regulator.c
+++ b/drivers/regulator/cpcap-regulator.c
@@ -271,6 +271,29 @@ static struct regulator_ops cpcap_regulator_ops = {
 };
 
 static const unsigned int unknown_val_tbl[] = { 0, };
+static const unsigned int sw2_sw4_val_tbl[] = { 612500, 625000, 637500,
+						650000, 662500, 675000,
+						687500, 700000, 712500,
+						725000, 737500, 750000,
+						762500, 775000, 787500,
+						800000, 812500, 825000,
+						837500, 850000, 862500,
+						875000, 887500, 900000,
+						912500, 925000, 937500,
+						950000, 962500, 975000,
+						987500, 1000000, 1012500,
+						1025000, 1037500, 1050000,
+						1062500, 1075000, 1087500,
+						1100000, 1112500, 1125000,
+						1137500, 1150000, 1162500,
+						1175000, 1187500, 1200000,
+						1212500, 1225000, 1237500,
+						1250000, 1262500, 1275000,
+						1287500, 1300000, 1312500,
+						1325000, 1337500, 1350000,
+						1362500, 1375000, 1387500,
+						1400000, 1412500, 1425000,
+						1437500, 1450000, 1462500, };
 static const unsigned int sw5_val_tbl[] = { 0, 5050000, };
 static const unsigned int vcam_val_tbl[] = { 2600000, 2700000, 2800000,
 					     2900000, };
@@ -389,6 +412,82 @@ static struct cpcap_regulator omap4_regulators[] = {
 	{ /* sentinel */ },
 };
 
+static struct cpcap_regulator xoom_regulators[] = {
+	CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW1_SEL, unknown_val_tbl,
+		  0, 0, 0, 0, 0, 0),
+	CPCAP_REG(SW2, CPCAP_REG_S2C1, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW2_SEL, sw2_sw4_val_tbl,
+		  0xf00, 0x7f, 0, 0x800, 0, 120),
+	CPCAP_REG(SW3, CPCAP_REG_S3C, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW3_SEL, unknown_val_tbl,
+		  0, 0, 0, 0, 0, 0),
+	CPCAP_REG(SW4, CPCAP_REG_S4C1, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW4_SEL, sw2_sw4_val_tbl,
+		  0xf00, 0x7f, 0, 0x900, 0, 100),
+	CPCAP_REG(SW5, CPCAP_REG_S5C, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW5_SEL, sw5_val_tbl,
+		  0x2a, 0, 0, 0x22, 0, 0),
+	CPCAP_REG(SW6, CPCAP_REG_S6C, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW6_SEL, unknown_val_tbl,
+		  0, 0, 0, 0, 0, 0),
+	CPCAP_REG(VCAM, CPCAP_REG_VCAMC, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_VCAM_SEL, vcam_val_tbl,
+		  0x87, 0x30, 4, 0x7, 0, 420),
+	CPCAP_REG(VCSI, CPCAP_REG_VCSIC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VCSI_SEL, vcsi_val_tbl,
+		  0x47, 0x10, 4, 0x7, 0, 350),
+	CPCAP_REG(VDAC, CPCAP_REG_VDACC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VDAC_SEL, vdac_val_tbl,
+		  0x87, 0x30, 4, 0x3, 0, 420),
+	CPCAP_REG(VDIG, CPCAP_REG_VDIGC, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_VDIG_SEL, vdig_val_tbl,
+		  0x87, 0x30, 4, 0x5, 0, 420),
+	CPCAP_REG(VFUSE, CPCAP_REG_VFUSEC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VFUSE_SEL, vfuse_val_tbl,
+		  0x80, 0xf, 0, 0x80, 0, 420),
+	CPCAP_REG(VHVIO, CPCAP_REG_VHVIOC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VHVIO_SEL, vhvio_val_tbl,
+		  0x17, 0, 0, 0x2, 0, 0),
+	CPCAP_REG(VSDIO, CPCAP_REG_VSDIOC, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_VSDIO_SEL, vsdio_val_tbl,
+		  0x87, 0x38, 3, 0x2, 0, 420),
+	CPCAP_REG(VPLL, CPCAP_REG_VPLLC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VPLL_SEL, vpll_val_tbl,
+		  0x43, 0x18, 3, 0x1, 0, 420),
+	CPCAP_REG(VRF1, CPCAP_REG_VRF1C, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VRF1_SEL, vrf1_val_tbl,
+		  0xac, 0x2, 1, 0xc, 0, 10),
+	CPCAP_REG(VRF2, CPCAP_REG_VRF2C, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VRF2_SEL, vrf2_val_tbl,
+		  0x23, 0x8, 3, 0x3, 0, 10),
+	CPCAP_REG(VRFREF, CPCAP_REG_VRFREFC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VRFREF_SEL, vrfref_val_tbl,
+		  0x23, 0x8, 3, 0x3, 0, 420),
+	CPCAP_REG(VWLAN1, CPCAP_REG_VWLAN1C, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VWLAN1_SEL, vwlan1_val_tbl,
+		  0x47, 0x10, 4, 0x5, 0, 420),
+	CPCAP_REG(VWLAN2, CPCAP_REG_VWLAN2C, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VWLAN2_SEL, vwlan2_val_tbl,
+		  0x20c, 0xc0, 6, 0x8, 0, 420),
+	CPCAP_REG(VSIM, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
+		  0xffff, vsim_val_tbl,
+		  0x23, 0x8, 3, 0x3, 0, 420),
+	CPCAP_REG(VSIMCARD, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
+		  0xffff, vsimcard_val_tbl,
+		  0x1e80, 0x8, 3, 0x1e00, 0, 420),
+	CPCAP_REG(VVIB, CPCAP_REG_VVIBC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VVIB_SEL, vvib_val_tbl,
+		  0x1, 0xc, 2, 0, 0x1, 500),
+	CPCAP_REG(VUSB, CPCAP_REG_VUSBC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VUSB_SEL, vusb_val_tbl,
+		  0x11c, 0x40, 6, 0xc, 0, 0),
+	CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
+		  CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
+		  0x16, 0x1, 0, 0x4, 0, 0),
+	{ /* sentinel */ },
+};
+
 static const struct of_device_id cpcap_regulator_id_table[] = {
 	{
 		.compatible = "motorola,cpcap-regulator",
@@ -397,6 +496,10 @@ static const struct of_device_id cpcap_regulator_id_table[] = {
 		.compatible = "motorola,mapphone-cpcap-regulator",
 		.data = omap4_regulators,
 	},
+	{
+		.compatible = "motorola,xoom-cpcap-regulator",
+		.data = xoom_regulators,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, cpcap_regulator_id_table);
diff --git a/drivers/regulator/max14577-regulator.c b/drivers/regulator/max14577-regulator.c
index 0db288ce319c..bc7f4751bf9c 100644
--- a/drivers/regulator/max14577-regulator.c
+++ b/drivers/regulator/max14577-regulator.c
@@ -1,19 +1,9 @@
-/*
- * max14577.c - Regulator driver for the Maxim 14577/77836
- *
- * Copyright (C) 2013,2014 Samsung Electronics
- * Krzysztof Kozlowski <krzk@kernel.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max14577.c - Regulator driver for the Maxim 14577/77836
+//
+// Copyright (C) 2013,2014 Samsung Electronics
+// Krzysztof Kozlowski <krzk@kernel.org>
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
diff --git a/drivers/regulator/max77686-regulator.c b/drivers/regulator/max77686-regulator.c
index c301f3733475..bee060937f56 100644
--- a/drivers/regulator/max77686-regulator.c
+++ b/drivers/regulator/max77686-regulator.c
@@ -1,26 +1,12 @@
-/*
- * max77686.c - Regulator driver for the Maxim 77686
- *
- * Copyright (C) 2012 Samsung Electronics
- * Chiwoong Byun <woong.byun@samsung.com>
- * Jonghwa Lee <jonghwa3.lee@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * This driver is based on max8997.c
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max77686.c - Regulator driver for the Maxim 77686
+//
+// Copyright (C) 2012 Samsung Electronics
+// Chiwoong Byun <woong.byun@samsung.com>
+// Jonghwa Lee <jonghwa3.lee@samsung.com>
+//
+// This driver is based on max8997.c
 
 #include <linux/kernel.h>
 #include <linux/bug.h>
diff --git a/drivers/regulator/max77693-regulator.c b/drivers/regulator/max77693-regulator.c
index e7000e777292..077ecbbfdf76 100644
--- a/drivers/regulator/max77693-regulator.c
+++ b/drivers/regulator/max77693-regulator.c
@@ -1,26 +1,12 @@
-/*
- * max77693.c - Regulator driver for the Maxim 77693 and 77843
- *
- * Copyright (C) 2013-2015 Samsung Electronics
- * Jonghwa Lee <jonghwa3.lee@samsung.com>
- * Krzysztof Kozlowski <krzk@kernel.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * This driver is based on max77686.c
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max77693.c - Regulator driver for the Maxim 77693 and 77843
+//
+// Copyright (C) 2013-2015 Samsung Electronics
+// Jonghwa Lee <jonghwa3.lee@samsung.com>
+// Krzysztof Kozlowski <krzk@kernel.org>
+//
+// This driver is based on max77686.c
 
 #include <linux/err.h>
 #include <linux/slab.h>
diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index b6261903818c..c30cf5c9f2de 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -1,25 +1,15 @@
-/*
- * max77802.c - Regulator driver for the Maxim 77802
- *
- * Copyright (C) 2013-2014 Google, Inc
- * Simon Glass <sjg@chromium.org>
- *
- * Copyright (C) 2012 Samsung Electronics
- * Chiwoong Byun <woong.byun@samsung.com>
- * Jonghwa Lee <jonghwa3.lee@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * This driver is based on max8997.c
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max77802.c - Regulator driver for the Maxim 77802
+//
+// Copyright (C) 2013-2014 Google, Inc
+// Simon Glass <sjg@chromium.org>
+//
+// Copyright (C) 2012 Samsung Electronics
+// Chiwoong Byun <woong.byun@samsung.com>
+// Jonghwa Lee <jonghwa3.lee@samsung.com>
+//
+// This driver is based on max8997.c
 
 #include <linux/kernel.h>
 #include <linux/bug.h>
diff --git a/drivers/regulator/max8997-regulator.c b/drivers/regulator/max8997-regulator.c
index a8ea30ee18a6..ad0c806b0737 100644
--- a/drivers/regulator/max8997-regulator.c
+++ b/drivers/regulator/max8997-regulator.c
@@ -1,25 +1,11 @@
-/*
- * max8997.c - Regulator driver for the Maxim 8997/8966
- *
- * Copyright (C) 2011 Samsung Electronics
- * MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * This driver is based on max8998.c
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max8997.c - Regulator driver for the Maxim 8997/8966
+//
+// Copyright (C) 2011 Samsung Electronics
+// MyungJoo Ham <myungjoo.ham@samsung.com>
+//
+// This driver is based on max8998.c
 
 #include <linux/bug.h>
 #include <linux/err.h>
@@ -165,8 +151,7 @@ static int max8997_list_voltage(struct regulator_dev *rdev,
 	int rid = rdev_get_id(rdev);
 	int val;
 
-	if (rid >= ARRAY_SIZE(reg_voltage_map) ||
-			rid < 0)
+	if (rid < 0 || rid >= ARRAY_SIZE(reg_voltage_map))
 		return -EINVAL;
 
 	desc = reg_voltage_map[rid];
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 6b9f262ebbb0..271bb736f3f5 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -1,24 +1,10 @@
-/*
- * max8998.c - Voltage regulator driver for the Maxim 8998
- *
- *  Copyright (C) 2009-2010 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *  Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max8998.c - Voltage regulator driver for the Maxim 8998
+//
+//  Copyright (C) 2009-2010 Samsung Electronics
+//  Kyungmin Park <kyungmin.park@samsung.com>
+//  Marek Szyprowski <m.szyprowski@samsung.com>
 
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 8d9dbcc775ea..31c3a236120a 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -17,6 +17,8 @@
 #include <linux/slab.h>
 #include <linux/regmap.h>
 
+#define PFUZE_FLAG_DISABLE_SW	BIT(1)
+
 #define PFUZE_NUMREGS		128
 #define PFUZE100_VOL_OFFSET	0
 #define PFUZE100_STANDBY_OFFSET	1
@@ -44,16 +46,18 @@
 #define PFUZE100_VGEN5VOL	0x70
 #define PFUZE100_VGEN6VOL	0x71
 
-enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 };
+enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3, PFUZE3001 = 0x31, };
 
 struct pfuze_regulator {
 	struct regulator_desc desc;
 	unsigned char stby_reg;
 	unsigned char stby_mask;
+	bool sw_reg;
 };
 
 struct pfuze_chip {
 	int	chip_id;
+	int     flags;
 	struct regmap *regmap;
 	struct device *dev;
 	struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
@@ -92,6 +96,7 @@ static const struct i2c_device_id pfuze_device_id[] = {
 	{.name = "pfuze100", .driver_data = PFUZE100},
 	{.name = "pfuze200", .driver_data = PFUZE200},
 	{.name = "pfuze3000", .driver_data = PFUZE3000},
+	{.name = "pfuze3001", .driver_data = PFUZE3001},
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
@@ -100,6 +105,7 @@ static const struct of_device_id pfuze_dt_ids[] = {
 	{ .compatible = "fsl,pfuze100", .data = (void *)PFUZE100},
 	{ .compatible = "fsl,pfuze200", .data = (void *)PFUZE200},
 	{ .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000},
+	{ .compatible = "fsl,pfuze3001", .data = (void *)PFUZE3001},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
@@ -108,10 +114,28 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 {
 	struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
 	int id = rdev_get_id(rdev);
+	bool reg_has_ramp_delay;
 	unsigned int ramp_bits;
 	int ret;
 
-	if (id < PFUZE100_SWBST) {
+	switch (pfuze100->chip_id) {
+	case PFUZE3001:
+		/* no dynamic voltage scaling for PF3001 */
+		reg_has_ramp_delay = false;
+		break;
+	case PFUZE3000:
+		reg_has_ramp_delay = (id < PFUZE3000_SWBST);
+		break;
+	case PFUZE200:
+		reg_has_ramp_delay = (id < PFUZE200_SWBST);
+		break;
+	case PFUZE100:
+	default:
+		reg_has_ramp_delay = (id < PFUZE100_SWBST);
+		break;
+	}
+
+	if (reg_has_ramp_delay) {
 		ramp_delay = 12500 / ramp_delay;
 		ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
 		ret = regmap_update_bits(pfuze100->regmap,
@@ -119,8 +143,9 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 					 0xc0, ramp_bits << 6);
 		if (ret < 0)
 			dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
-	} else
+	} else {
 		ret = -EACCES;
+	}
 
 	return ret;
 }
@@ -142,6 +167,14 @@ static const struct regulator_ops pfuze100_fixed_regulator_ops = {
 };
 
 static const struct regulator_ops pfuze100_sw_regulator_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.set_ramp_delay = pfuze100_set_ramp_delay,
+};
+
+static const struct regulator_ops pfuze100_sw_disable_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -192,13 +225,11 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
 			.vsel_reg = (base) + PFUZE100_VOL_OFFSET,	\
 			.vsel_mask = 0x3f,	\
 			.enable_reg = (base) + PFUZE100_MODE_OFFSET,	\
-			.enable_val = 0xc,	\
-			.disable_val = 0x0,	\
 			.enable_mask = 0xf,	\
-			.enable_time = 500,	\
 		},	\
 		.stby_reg = (base) + PFUZE100_STANDBY_OFFSET,	\
 		.stby_mask = 0x3f,	\
+		.sw_reg = true,		\
 	}
 
 #define PFUZE100_SWB_REG(_chip, _name, base, mask, voltages)	\
@@ -361,6 +392,19 @@ static struct pfuze_regulator pfuze3000_regulators[] = {
 	PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
 };
 
+static struct pfuze_regulator pfuze3001_regulators[] = {
+	PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
+	PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
+	PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
+	PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
+	PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),
+	PFUZE100_VGEN_REG(PFUZE3001, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
+	PFUZE3000_VCC_REG(PFUZE3001, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000),
+	PFUZE3000_VCC_REG(PFUZE3001, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000),
+	PFUZE100_VGEN_REG(PFUZE3001, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
+	PFUZE100_VGEN_REG(PFUZE3001, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
+};
+
 #ifdef CONFIG_OF
 /* PFUZE100 */
 static struct of_regulator_match pfuze100_matches[] = {
@@ -418,6 +462,21 @@ static struct of_regulator_match pfuze3000_matches[] = {
 	{ .name = "vldo4",	},
 };
 
+/* PFUZE3001 */
+static struct of_regulator_match pfuze3001_matches[] = {
+
+	{ .name = "sw1",	},
+	{ .name = "sw2",	},
+	{ .name = "sw3",	},
+	{ .name = "vsnvs",	},
+	{ .name = "vldo1",	},
+	{ .name = "vldo2",	},
+	{ .name = "vccsd",	},
+	{ .name = "v33",	},
+	{ .name = "vldo3",	},
+	{ .name = "vldo4",	},
+};
+
 static struct of_regulator_match *pfuze_matches;
 
 static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
@@ -430,6 +489,9 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
 	if (!np)
 		return -EINVAL;
 
+	if (of_property_read_bool(np, "fsl,pfuze-support-disable-sw"))
+		chip->flags |= PFUZE_FLAG_DISABLE_SW;
+
 	parent = of_get_child_by_name(np, "regulators");
 	if (!parent) {
 		dev_err(dev, "regulators node not found\n");
@@ -437,6 +499,11 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
 	}
 
 	switch (chip->chip_id) {
+	case PFUZE3001:
+		pfuze_matches = pfuze3001_matches;
+		ret = of_regulator_match(dev, parent, pfuze3001_matches,
+					 ARRAY_SIZE(pfuze3001_matches));
+		break;
 	case PFUZE3000:
 		pfuze_matches = pfuze3000_matches;
 		ret = of_regulator_match(dev, parent, pfuze3000_matches,
@@ -508,7 +575,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
 		 */
 		dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
 	} else if ((value & 0x0f) != pfuze_chip->chip_id &&
-		   (value & 0xf0) >> 4 != pfuze_chip->chip_id) {
+		   (value & 0xf0) >> 4 != pfuze_chip->chip_id &&
+		   (value != pfuze_chip->chip_id)) {
 		/* device id NOT match with your setting */
 		dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
 		return -ENODEV;
@@ -588,6 +656,13 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 
 	/* use the right regulators after identify the right device */
 	switch (pfuze_chip->chip_id) {
+	case PFUZE3001:
+		pfuze_chip->pfuze_regulators = pfuze3001_regulators;
+		regulator_num = ARRAY_SIZE(pfuze3001_regulators);
+		sw_check_start = PFUZE3001_SW2;
+		sw_check_end = PFUZE3001_SW2;
+		sw_hi = 1 << 3;
+		break;
 	case PFUZE3000:
 		pfuze_chip->pfuze_regulators = pfuze3000_regulators;
 		regulator_num = ARRAY_SIZE(pfuze3000_regulators);
@@ -611,7 +686,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 	}
 	dev_info(&client->dev, "pfuze%s found.\n",
 		(pfuze_chip->chip_id == PFUZE100) ? "100" :
-		((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000"));
+		(((pfuze_chip->chip_id == PFUZE200) ? "200" :
+		((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001"))));
 
 	memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators,
 		sizeof(pfuze_chip->regulator_descs));
@@ -636,7 +712,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		if (i >= sw_check_start && i <= sw_check_end) {
 			regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
 			if (val & sw_hi) {
-				if (pfuze_chip->chip_id == PFUZE3000) {
+				if (pfuze_chip->chip_id == PFUZE3000 ||
+					pfuze_chip->chip_id == PFUZE3001) {
 					desc->volt_table = pfuze3000_sw2hi;
 					desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi);
 				} else {
@@ -647,6 +724,21 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 			}
 		}
 
+		/*
+		 * Allow SW regulators to turn off. Checking it trough a flag is
+		 * a workaround to keep the backward compatibility with existing
+		 * old dtb's which may relay on the fact that we didn't disable
+		 * the switched regulator till yet.
+		 */
+		if (pfuze_chip->flags & PFUZE_FLAG_DISABLE_SW) {
+			if (pfuze_chip->regulator_descs[i].sw_reg) {
+				desc->ops = &pfuze100_sw_disable_regulator_ops;
+				desc->enable_val = 0x8;
+				desc->disable_val = 0x0;
+				desc->enable_time = 500;
+			}
+		}
+
 		config.dev = &client->dev;
 		config.init_data = init_data;
 		config.driver_data = pfuze_chip;
@@ -675,5 +767,5 @@ static struct i2c_driver pfuze_driver = {
 module_i2c_driver(pfuze_driver);
 
 MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
-MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000 PMIC");
+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000/3001 PMIC");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
new file mode 100644
index 000000000000..9f27daebd8c8
--- /dev/null
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -0,0 +1,769 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/rpmh.h>
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/**
+ * enum rpmh_regulator_type - supported RPMh accelerator types
+ * %VRM:	RPMh VRM accelerator which supports voting on enable, voltage,
+ *		and mode of LDO, SMPS, and BOB type PMIC regulators.
+ * %XOB:	RPMh XOB accelerator which supports voting on the enable state
+ *		of PMIC regulators.
+ */
+enum rpmh_regulator_type {
+	VRM,
+	XOB,
+};
+
+#define RPMH_REGULATOR_REG_VRM_VOLTAGE		0x0
+#define RPMH_REGULATOR_REG_ENABLE		0x4
+#define RPMH_REGULATOR_REG_VRM_MODE		0x8
+
+#define PMIC4_LDO_MODE_RETENTION		4
+#define PMIC4_LDO_MODE_LPM			5
+#define PMIC4_LDO_MODE_HPM			7
+
+#define PMIC4_SMPS_MODE_RETENTION		4
+#define PMIC4_SMPS_MODE_PFM			5
+#define PMIC4_SMPS_MODE_AUTO			6
+#define PMIC4_SMPS_MODE_PWM			7
+
+#define PMIC4_BOB_MODE_PASS			0
+#define PMIC4_BOB_MODE_PFM			1
+#define PMIC4_BOB_MODE_AUTO			2
+#define PMIC4_BOB_MODE_PWM			3
+
+/**
+ * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations
+ * @regulator_type:		RPMh accelerator type used to manage this
+ *				regulator
+ * @ops:			Pointer to regulator ops callback structure
+ * @voltage_range:		The single range of voltages supported by this
+ *				PMIC regulator type
+ * @n_voltages:			The number of unique voltage set points defined
+ *				by voltage_range
+ * @hpm_min_load_uA:		Minimum load current in microamps that requires
+ *				high power mode (HPM) operation.  This is used
+ *				for LDO hardware type regulators only.
+ * @pmic_mode_map:		Array indexed by regulator framework mode
+ *				containing PMIC hardware modes.  Must be large
+ *				enough to index all framework modes supported
+ *				by this regulator hardware type.
+ * @of_map_mode:		Maps an RPMH_REGULATOR_MODE_* mode value defined
+ *				in device tree to a regulator framework mode
+ */
+struct rpmh_vreg_hw_data {
+	enum rpmh_regulator_type		regulator_type;
+	const struct regulator_ops		*ops;
+	const struct regulator_linear_range	voltage_range;
+	int					n_voltages;
+	int					hpm_min_load_uA;
+	const int				*pmic_mode_map;
+	unsigned int			      (*of_map_mode)(unsigned int mode);
+};
+
+/**
+ * struct rpmh_vreg - individual RPMh regulator data structure encapsulating a
+ *		single regulator device
+ * @dev:			Device pointer for the top-level PMIC RPMh
+ *				regulator parent device.  This is used as a
+ *				handle in RPMh write requests.
+ * @addr:			Base address of the regulator resource within
+ *				an RPMh accelerator
+ * @rdesc:			Regulator descriptor
+ * @hw_data:			PMIC regulator configuration data for this RPMh
+ *				regulator
+ * @always_wait_for_ack:	Boolean flag indicating if a request must always
+ *				wait for an ACK from RPMh before continuing even
+ *				if it corresponds to a strictly lower power
+ *				state (e.g. enabled --> disabled).
+ * @enabled:			Flag indicating if the regulator is enabled or
+ *				not
+ * @bypassed:			Boolean indicating if the regulator is in
+ *				bypass (pass-through) mode or not.  This is
+ *				only used by BOB rpmh-regulator resources.
+ * @voltage_selector:		Selector used for get_voltage_sel() and
+ *				set_voltage_sel() callbacks
+ * @mode:			RPMh VRM regulator current framework mode
+ */
+struct rpmh_vreg {
+	struct device			*dev;
+	u32				addr;
+	struct regulator_desc		rdesc;
+	const struct rpmh_vreg_hw_data	*hw_data;
+	bool				always_wait_for_ack;
+
+	int				enabled;
+	bool				bypassed;
+	int				voltage_selector;
+	unsigned int			mode;
+};
+
+/**
+ * struct rpmh_vreg_init_data - initialization data for an RPMh regulator
+ * @name:			Name for the regulator which also corresponds
+ *				to the device tree subnode name of the regulator
+ * @resource_name:		RPMh regulator resource name format string.
+ *				This must include exactly one field: '%s' which
+ *				is filled at run-time with the PMIC ID provided
+ *				by device tree property qcom,pmic-id.  Example:
+ *				"ldo%s1" for RPMh resource "ldoa1".
+ * @supply_name:		Parent supply regulator name
+ * @hw_data:			Configuration data for this PMIC regulator type
+ */
+struct rpmh_vreg_init_data {
+	const char			*name;
+	const char			*resource_name;
+	const char			*supply_name;
+	const struct rpmh_vreg_hw_data	*hw_data;
+};
+
+/**
+ * rpmh_regulator_send_request() - send the request to RPMh
+ * @vreg:		Pointer to the RPMh regulator
+ * @cmd:		Pointer to the RPMh command to send
+ * @wait_for_ack:	Boolean indicating if execution must wait until the
+ *			request has been acknowledged as complete
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_send_request(struct rpmh_vreg *vreg,
+			struct tcs_cmd *cmd, bool wait_for_ack)
+{
+	int ret;
+
+	if (wait_for_ack || vreg->always_wait_for_ack)
+		ret = rpmh_write(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd, 1);
+	else
+		ret = rpmh_write_async(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd,
+					1);
+
+	return ret;
+}
+
+static int _rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev,
+				unsigned int selector, bool wait_for_ack)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+	struct tcs_cmd cmd = {
+		.addr = vreg->addr + RPMH_REGULATOR_REG_VRM_VOLTAGE,
+	};
+	int ret;
+
+	/* VRM voltage control register is set with voltage in millivolts. */
+	cmd.data = DIV_ROUND_UP(regulator_list_voltage_linear_range(rdev,
+							selector), 1000);
+
+	ret = rpmh_regulator_send_request(vreg, &cmd, wait_for_ack);
+	if (!ret)
+		vreg->voltage_selector = selector;
+
+	return ret;
+}
+
+static int rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev,
+					unsigned int selector)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+	if (vreg->enabled == -EINVAL) {
+		/*
+		 * Cache the voltage and send it later when the regulator is
+		 * enabled or disabled.
+		 */
+		vreg->voltage_selector = selector;
+		return 0;
+	}
+
+	return _rpmh_regulator_vrm_set_voltage_sel(rdev, selector,
+					selector > vreg->voltage_selector);
+}
+
+static int rpmh_regulator_vrm_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+	return vreg->voltage_selector;
+}
+
+static int rpmh_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+	return vreg->enabled;
+}
+
+static int rpmh_regulator_set_enable_state(struct regulator_dev *rdev,
+					bool enable)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+	struct tcs_cmd cmd = {
+		.addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
+		.data = enable,
+	};
+	int ret;
+
+	if (vreg->enabled == -EINVAL &&
+	    vreg->voltage_selector != -ENOTRECOVERABLE) {
+		ret = _rpmh_regulator_vrm_set_voltage_sel(rdev,
+						vreg->voltage_selector, true);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = rpmh_regulator_send_request(vreg, &cmd, enable);
+	if (!ret)
+		vreg->enabled = enable;
+
+	return ret;
+}
+
+static int rpmh_regulator_enable(struct regulator_dev *rdev)
+{
+	return rpmh_regulator_set_enable_state(rdev, true);
+}
+
+static int rpmh_regulator_disable(struct regulator_dev *rdev)
+{
+	return rpmh_regulator_set_enable_state(rdev, false);
+}
+
+static int rpmh_regulator_vrm_set_mode_bypass(struct rpmh_vreg *vreg,
+					unsigned int mode, bool bypassed)
+{
+	struct tcs_cmd cmd = {
+		.addr = vreg->addr + RPMH_REGULATOR_REG_VRM_MODE,
+	};
+	int pmic_mode;
+
+	if (mode > REGULATOR_MODE_STANDBY)
+		return -EINVAL;
+
+	pmic_mode = vreg->hw_data->pmic_mode_map[mode];
+	if (pmic_mode < 0)
+		return pmic_mode;
+
+	if (bypassed)
+		cmd.data = PMIC4_BOB_MODE_PASS;
+	else
+		cmd.data = pmic_mode;
+
+	return rpmh_regulator_send_request(vreg, &cmd, true);
+}
+
+static int rpmh_regulator_vrm_set_mode(struct regulator_dev *rdev,
+					unsigned int mode)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (mode == vreg->mode)
+		return 0;
+
+	ret = rpmh_regulator_vrm_set_mode_bypass(vreg, mode, vreg->bypassed);
+	if (!ret)
+		vreg->mode = mode;
+
+	return ret;
+}
+
+static unsigned int rpmh_regulator_vrm_get_mode(struct regulator_dev *rdev)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+	return vreg->mode;
+}
+
+/**
+ * rpmh_regulator_vrm_set_load() - set the regulator mode based upon the load
+ *		current requested
+ * @rdev:		Regulator device pointer for the rpmh-regulator
+ * @load_uA:		Aggregated load current in microamps
+ *
+ * This function is used in the regulator_ops for VRM type RPMh regulator
+ * devices.
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_vrm_set_load(struct regulator_dev *rdev, int load_uA)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+	unsigned int mode;
+
+	if (load_uA >= vreg->hw_data->hpm_min_load_uA)
+		mode = REGULATOR_MODE_NORMAL;
+	else
+		mode = REGULATOR_MODE_IDLE;
+
+	return rpmh_regulator_vrm_set_mode(rdev, mode);
+}
+
+static int rpmh_regulator_vrm_set_bypass(struct regulator_dev *rdev,
+				bool enable)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (vreg->bypassed == enable)
+		return 0;
+
+	ret = rpmh_regulator_vrm_set_mode_bypass(vreg, vreg->mode, enable);
+	if (!ret)
+		vreg->bypassed = enable;
+
+	return ret;
+}
+
+static int rpmh_regulator_vrm_get_bypass(struct regulator_dev *rdev,
+				bool *enable)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+	*enable = vreg->bypassed;
+
+	return 0;
+}
+
+static const struct regulator_ops rpmh_regulator_vrm_ops = {
+	.enable			= rpmh_regulator_enable,
+	.disable		= rpmh_regulator_disable,
+	.is_enabled		= rpmh_regulator_is_enabled,
+	.set_voltage_sel	= rpmh_regulator_vrm_set_voltage_sel,
+	.get_voltage_sel	= rpmh_regulator_vrm_get_voltage_sel,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.set_mode		= rpmh_regulator_vrm_set_mode,
+	.get_mode		= rpmh_regulator_vrm_get_mode,
+};
+
+static const struct regulator_ops rpmh_regulator_vrm_drms_ops = {
+	.enable			= rpmh_regulator_enable,
+	.disable		= rpmh_regulator_disable,
+	.is_enabled		= rpmh_regulator_is_enabled,
+	.set_voltage_sel	= rpmh_regulator_vrm_set_voltage_sel,
+	.get_voltage_sel	= rpmh_regulator_vrm_get_voltage_sel,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.set_mode		= rpmh_regulator_vrm_set_mode,
+	.get_mode		= rpmh_regulator_vrm_get_mode,
+	.set_load		= rpmh_regulator_vrm_set_load,
+};
+
+static const struct regulator_ops rpmh_regulator_vrm_bypass_ops = {
+	.enable			= rpmh_regulator_enable,
+	.disable		= rpmh_regulator_disable,
+	.is_enabled		= rpmh_regulator_is_enabled,
+	.set_voltage_sel	= rpmh_regulator_vrm_set_voltage_sel,
+	.get_voltage_sel	= rpmh_regulator_vrm_get_voltage_sel,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.set_mode		= rpmh_regulator_vrm_set_mode,
+	.get_mode		= rpmh_regulator_vrm_get_mode,
+	.set_bypass		= rpmh_regulator_vrm_set_bypass,
+	.get_bypass		= rpmh_regulator_vrm_get_bypass,
+};
+
+static const struct regulator_ops rpmh_regulator_xob_ops = {
+	.enable			= rpmh_regulator_enable,
+	.disable		= rpmh_regulator_disable,
+	.is_enabled		= rpmh_regulator_is_enabled,
+};
+
+/**
+ * rpmh_regulator_init_vreg() - initialize all attributes of an rpmh-regulator
+ * vreg:		Pointer to the individual rpmh-regulator resource
+ * dev:			Pointer to the top level rpmh-regulator PMIC device
+ * node:		Pointer to the individual rpmh-regulator resource
+ *			device node
+ * pmic_id:		String used to identify the top level rpmh-regulator
+ *			PMIC device on the board
+ * pmic_rpmh_data:	Pointer to a null-terminated array of rpmh-regulator
+ *			resources defined for the top level PMIC device
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_init_vreg(struct rpmh_vreg *vreg, struct device *dev,
+			struct device_node *node, const char *pmic_id,
+			const struct rpmh_vreg_init_data *pmic_rpmh_data)
+{
+	struct regulator_config reg_config = {};
+	char rpmh_resource_name[20] = "";
+	const struct rpmh_vreg_init_data *rpmh_data;
+	struct regulator_init_data *init_data;
+	struct regulator_dev *rdev;
+	int ret;
+
+	vreg->dev = dev;
+
+	for (rpmh_data = pmic_rpmh_data; rpmh_data->name; rpmh_data++)
+		if (!strcmp(rpmh_data->name, node->name))
+			break;
+
+	if (!rpmh_data->name) {
+		dev_err(dev, "Unknown regulator %s\n", node->name);
+		return -EINVAL;
+	}
+
+	scnprintf(rpmh_resource_name, sizeof(rpmh_resource_name),
+		rpmh_data->resource_name, pmic_id);
+
+	vreg->addr = cmd_db_read_addr(rpmh_resource_name);
+	if (!vreg->addr) {
+		dev_err(dev, "%s: could not find RPMh address for resource %s\n",
+			node->name, rpmh_resource_name);
+		return -ENODEV;
+	}
+
+	vreg->rdesc.name = rpmh_data->name;
+	vreg->rdesc.supply_name = rpmh_data->supply_name;
+	vreg->hw_data = rpmh_data->hw_data;
+
+	vreg->enabled = -EINVAL;
+	vreg->voltage_selector = -ENOTRECOVERABLE;
+	vreg->mode = REGULATOR_MODE_INVALID;
+
+	if (rpmh_data->hw_data->n_voltages) {
+		vreg->rdesc.linear_ranges = &rpmh_data->hw_data->voltage_range;
+		vreg->rdesc.n_linear_ranges = 1;
+		vreg->rdesc.n_voltages = rpmh_data->hw_data->n_voltages;
+	}
+
+	vreg->always_wait_for_ack = of_property_read_bool(node,
+						"qcom,always-wait-for-ack");
+
+	vreg->rdesc.owner	= THIS_MODULE;
+	vreg->rdesc.type	= REGULATOR_VOLTAGE;
+	vreg->rdesc.ops		= vreg->hw_data->ops;
+	vreg->rdesc.of_map_mode	= vreg->hw_data->of_map_mode;
+
+	init_data = of_get_regulator_init_data(dev, node, &vreg->rdesc);
+	if (!init_data)
+		return -ENOMEM;
+
+	if (rpmh_data->hw_data->regulator_type == XOB &&
+	    init_data->constraints.min_uV &&
+	    init_data->constraints.min_uV == init_data->constraints.max_uV) {
+		vreg->rdesc.fixed_uV = init_data->constraints.min_uV;
+		vreg->rdesc.n_voltages = 1;
+	}
+
+	reg_config.dev		= dev;
+	reg_config.init_data	= init_data;
+	reg_config.of_node	= node;
+	reg_config.driver_data	= vreg;
+
+	rdev = devm_regulator_register(dev, &vreg->rdesc, &reg_config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(dev, "%s: devm_regulator_register() failed, ret=%d\n",
+			node->name, ret);
+		return ret;
+	}
+
+	dev_dbg(dev, "%s regulator registered for RPMh resource %s @ 0x%05X\n",
+		node->name, rpmh_resource_name, vreg->addr);
+
+	return 0;
+}
+
+static const int pmic_mode_map_pmic4_ldo[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = PMIC4_LDO_MODE_RETENTION,
+	[REGULATOR_MODE_IDLE]    = PMIC4_LDO_MODE_LPM,
+	[REGULATOR_MODE_NORMAL]  = PMIC4_LDO_MODE_HPM,
+	[REGULATOR_MODE_FAST]    = -EINVAL,
+};
+
+static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int rpmh_mode)
+{
+	unsigned int mode;
+
+	switch (rpmh_mode) {
+	case RPMH_REGULATOR_MODE_HPM:
+		mode = REGULATOR_MODE_NORMAL;
+		break;
+	case RPMH_REGULATOR_MODE_LPM:
+		mode = REGULATOR_MODE_IDLE;
+		break;
+	case RPMH_REGULATOR_MODE_RET:
+		mode = REGULATOR_MODE_STANDBY;
+		break;
+	default:
+		mode = REGULATOR_MODE_INVALID;
+	}
+
+	return mode;
+}
+
+static const int pmic_mode_map_pmic4_smps[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = PMIC4_SMPS_MODE_RETENTION,
+	[REGULATOR_MODE_IDLE]    = PMIC4_SMPS_MODE_PFM,
+	[REGULATOR_MODE_NORMAL]  = PMIC4_SMPS_MODE_AUTO,
+	[REGULATOR_MODE_FAST]    = PMIC4_SMPS_MODE_PWM,
+};
+
+static unsigned int
+rpmh_regulator_pmic4_smps_of_map_mode(unsigned int rpmh_mode)
+{
+	unsigned int mode;
+
+	switch (rpmh_mode) {
+	case RPMH_REGULATOR_MODE_HPM:
+		mode = REGULATOR_MODE_FAST;
+		break;
+	case RPMH_REGULATOR_MODE_AUTO:
+		mode = REGULATOR_MODE_NORMAL;
+		break;
+	case RPMH_REGULATOR_MODE_LPM:
+		mode = REGULATOR_MODE_IDLE;
+		break;
+	case RPMH_REGULATOR_MODE_RET:
+		mode = REGULATOR_MODE_STANDBY;
+		break;
+	default:
+		mode = REGULATOR_MODE_INVALID;
+	}
+
+	return mode;
+}
+
+static const int pmic_mode_map_pmic4_bob[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = -EINVAL,
+	[REGULATOR_MODE_IDLE]    = PMIC4_BOB_MODE_PFM,
+	[REGULATOR_MODE_NORMAL]  = PMIC4_BOB_MODE_AUTO,
+	[REGULATOR_MODE_FAST]    = PMIC4_BOB_MODE_PWM,
+};
+
+static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode)
+{
+	unsigned int mode;
+
+	switch (rpmh_mode) {
+	case RPMH_REGULATOR_MODE_HPM:
+		mode = REGULATOR_MODE_FAST;
+		break;
+	case RPMH_REGULATOR_MODE_AUTO:
+		mode = REGULATOR_MODE_NORMAL;
+		break;
+	case RPMH_REGULATOR_MODE_LPM:
+		mode = REGULATOR_MODE_IDLE;
+		break;
+	default:
+		mode = REGULATOR_MODE_INVALID;
+	}
+
+	return mode;
+}
+
+static const struct rpmh_vreg_hw_data pmic4_pldo = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000),
+	.n_voltages = 256,
+	.hpm_min_load_uA = 10000,
+	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_pldo_lv = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000),
+	.n_voltages = 128,
+	.hpm_min_load_uA = 10000,
+	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_nldo = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
+	.n_voltages = 128,
+	.hpm_min_load_uA = 30000,
+	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_hfsmps3 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
+	.n_voltages = 216,
+	.pmic_mode_map = pmic_mode_map_pmic4_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_ftsmps426 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000),
+	.n_voltages = 259,
+	.pmic_mode_map = pmic_mode_map_pmic4_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_bob = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_bypass_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000),
+	.n_voltages = 84,
+	.pmic_mode_map = pmic_mode_map_pmic4_bob,
+	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_lvs = {
+	.regulator_type = XOB,
+	.ops = &rpmh_regulator_xob_ops,
+	/* LVS hardware does not support voltage or mode configuration. */
+};
+
+#define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \
+{ \
+	.name		= _name, \
+	.resource_name	= _resource_name, \
+	.hw_data	= _hw_data, \
+	.supply_name	= _supply_name, \
+}
+
+static const struct rpmh_vreg_init_data pm8998_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic4_ftsmps426, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic4_ftsmps426, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic4_hfsmps3,   "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic4_hfsmps3,   "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic4_hfsmps3,   "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic4_ftsmps426, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic4_ftsmps426, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic4_ftsmps426, "vdd-s8"),
+	RPMH_VREG("smps9",  "smp%s9",  &pmic4_ftsmps426, "vdd-s9"),
+	RPMH_VREG("smps10", "smp%s10", &pmic4_ftsmps426, "vdd-s10"),
+	RPMH_VREG("smps11", "smp%s11", &pmic4_ftsmps426, "vdd-s11"),
+	RPMH_VREG("smps12", "smp%s12", &pmic4_ftsmps426, "vdd-s12"),
+	RPMH_VREG("smps13", "smp%s13", &pmic4_ftsmps426, "vdd-s13"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic4_nldo,      "vdd-l1-l27"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic4_nldo,      "vdd-l2-l8-l17"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic4_nldo,      "vdd-l3-l11"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic4_nldo,      "vdd-l4-l5"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic4_nldo,      "vdd-l4-l5"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic4_pldo,      "vdd-l6"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic4_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic4_nldo,      "vdd-l2-l8-l17"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic4_pldo,      "vdd-l9"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic4_pldo,      "vdd-l10-l23-l25"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic4_nldo,      "vdd-l3-l11"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic4_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic4_pldo,      "vdd-l13-l19-l21"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic4_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic4_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic4_pldo,      "vdd-l16-l28"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic4_nldo,      "vdd-l2-l8-l17"),
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic4_pldo,      "vdd-l18-l22"),
+	RPMH_VREG("ldo19",  "ldo%s19", &pmic4_pldo,      "vdd-l13-l19-l21"),
+	RPMH_VREG("ldo20",  "ldo%s20", &pmic4_pldo,      "vdd-l20-l24"),
+	RPMH_VREG("ldo21",  "ldo%s21", &pmic4_pldo,      "vdd-l13-l19-l21"),
+	RPMH_VREG("ldo22",  "ldo%s22", &pmic4_pldo,      "vdd-l18-l22"),
+	RPMH_VREG("ldo23",  "ldo%s23", &pmic4_pldo,      "vdd-l10-l23-l25"),
+	RPMH_VREG("ldo24",  "ldo%s24", &pmic4_pldo,      "vdd-l20-l24"),
+	RPMH_VREG("ldo25",  "ldo%s25", &pmic4_pldo,      "vdd-l10-l23-l25"),
+	RPMH_VREG("ldo26",  "ldo%s26", &pmic4_nldo,      "vdd-l26"),
+	RPMH_VREG("ldo27",  "ldo%s27", &pmic4_nldo,      "vdd-l1-l27"),
+	RPMH_VREG("ldo28",  "ldo%s28", &pmic4_pldo,      "vdd-l16-l28"),
+	RPMH_VREG("lvs1",   "vs%s1",   &pmic4_lvs,       "vin-lvs-1-2"),
+	RPMH_VREG("lvs2",   "vs%s2",   &pmic4_lvs,       "vin-lvs-1-2"),
+	{},
+};
+
+static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = {
+	RPMH_VREG("bob",    "bob%s1",  &pmic4_bob,       "vdd-bob"),
+	{},
+};
+
+static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic4_ftsmps426, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic4_ftsmps426, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic4_ftsmps426, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic4_ftsmps426, "vdd-s4"),
+	{},
+};
+
+static int rpmh_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct rpmh_vreg_init_data *vreg_data;
+	struct device_node *node;
+	struct rpmh_vreg *vreg;
+	const char *pmic_id;
+	int ret;
+
+	vreg_data = of_device_get_match_data(dev);
+	if (!vreg_data)
+		return -ENODEV;
+
+	ret = of_property_read_string(dev->of_node, "qcom,pmic-id", &pmic_id);
+	if (ret < 0) {
+		dev_err(dev, "qcom,pmic-id missing in DT node\n");
+		return ret;
+	}
+
+	for_each_available_child_of_node(dev->of_node, node) {
+		vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+		if (!vreg) {
+			of_node_put(node);
+			return -ENOMEM;
+		}
+
+		ret = rpmh_regulator_init_vreg(vreg, dev, node, pmic_id,
+						vreg_data);
+		if (ret < 0) {
+			of_node_put(node);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id rpmh_regulator_match_table[] = {
+	{
+		.compatible = "qcom,pm8998-rpmh-regulators",
+		.data = pm8998_vreg_data,
+	},
+	{
+		.compatible = "qcom,pmi8998-rpmh-regulators",
+		.data = pmi8998_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8005-rpmh-regulators",
+		.data = pm8005_vreg_data,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
+
+static struct platform_driver rpmh_regulator_driver = {
+	.driver = {
+		.name = "qcom-rpmh-regulator",
+		.of_match_table	= of_match_ptr(rpmh_regulator_match_table),
+	},
+	.probe = rpmh_regulator_probe,
+};
+module_platform_driver(rpmh_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm RPMh regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 9817f1a75342..53a61fb65642 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -1060,7 +1060,7 @@ static irqreturn_t spmi_regulator_vs_ocp_isr(int irq, void *data)
 #define SAW3_AVS_CTL_TGGL_MASK	0x8000000
 #define SAW3_AVS_CTL_CLEAR_MASK	0x7efc00
 
-static struct regmap *saw_regmap = NULL;
+static struct regmap *saw_regmap;
 
 static void spmi_saw_set_vdd(void *data)
 {
@@ -1728,7 +1728,7 @@ static const struct spmi_regulator_data pmi8994_regulators[] = {
 	{ "s2", 0x1700, "vdd_s2", },
 	{ "s3", 0x1a00, "vdd_s3", },
 	{ "l1", 0x4000, "vdd_l1", },
-        { }
+	{ }
 };
 
 static const struct of_device_id qcom_spmi_regulator_match[] = {
@@ -1752,7 +1752,8 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
 	const char *name;
 	struct device *dev = &pdev->dev;
 	struct device_node *node = pdev->dev.of_node;
-	struct device_node *syscon;
+	struct device_node *syscon, *reg_node;
+	struct property *reg_prop;
 	int ret, lenp;
 	struct list_head *vreg_list;
 
@@ -1774,16 +1775,19 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
 		syscon = of_parse_phandle(node, "qcom,saw-reg", 0);
 		saw_regmap = syscon_node_to_regmap(syscon);
 		of_node_put(syscon);
-		if (IS_ERR(regmap))
+		if (IS_ERR(saw_regmap))
 			dev_err(dev, "ERROR reading SAW regmap\n");
 	}
 
 	for (reg = match->data; reg->name; reg++) {
 
-		if (saw_regmap && \
-		    of_find_property(of_find_node_by_name(node, reg->name), \
-				     "qcom,saw-slave", &lenp)) {
-			continue;
+		if (saw_regmap) {
+			reg_node = of_get_child_by_name(node, reg->name);
+			reg_prop = of_find_property(reg_node, "qcom,saw-slave",
+						    &lenp);
+			of_node_put(reg_node);
+			if (reg_prop)
+				continue;
 		}
 
 		vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
@@ -1816,13 +1820,17 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
 		if (ret)
 			continue;
 
-		if (saw_regmap && \
-		    of_find_property(of_find_node_by_name(node, reg->name), \
-				     "qcom,saw-leader", &lenp)) {
-			spmi_saw_ops = *(vreg->desc.ops);
-			spmi_saw_ops.set_voltage_sel = \
-				spmi_regulator_saw_set_voltage;
-			vreg->desc.ops = &spmi_saw_ops;
+		if (saw_regmap) {
+			reg_node = of_get_child_by_name(node, reg->name);
+			reg_prop = of_find_property(reg_node, "qcom,saw-leader",
+						    &lenp);
+			of_node_put(reg_node);
+			if (reg_prop) {
+				spmi_saw_ops = *(vreg->desc.ops);
+				spmi_saw_ops.set_voltage_sel =
+					spmi_regulator_saw_set_voltage;
+				vreg->desc.ops = &spmi_saw_ops;
+			}
 		}
 
 		config.dev = dev;
diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
index 48f0ca90743c..095d25f3d2ea 100644
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -1,13 +1,7 @@
-/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd
- *		http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2013 Samsung Electronics Co., Ltd
+//		http://www.samsung.com
 
 #include <linux/bug.h>
 #include <linux/err.h>
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index d1207ec683db..5bb6f4ca48db 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -1,20 +1,7 @@
-/*
- * s2mps11.c
- *
- * Copyright (c) 2012-2014 Samsung Electronics Co., Ltd
- *              http://www.samsung.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2012-2014 Samsung Electronics Co., Ltd
+//              http://www.samsung.com
 
 #include <linux/bug.h>
 #include <linux/err.h>
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 0cbc980753c2..667d16dc83ce 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -1,15 +1,7 @@
-/*
- * s5m8767.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
- *              http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2011 Samsung Electronics Co., Ltd
+//              http://www.samsung.com
 
 #include <linux/err.h>
 #include <linux/of_gpio.h>
diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c
index fc12badf3805..d84fab616abf 100644
--- a/drivers/regulator/tps65217-regulator.c
+++ b/drivers/regulator/tps65217-regulator.c
@@ -232,6 +232,8 @@ static int tps65217_regulator_probe(struct platform_device *pdev)
 	tps->strobes = devm_kcalloc(&pdev->dev,
 				    TPS65217_NUM_REGULATOR, sizeof(u8),
 				    GFP_KERNEL);
+	if (!tps->strobes)
+		return -ENOMEM;
 
 	platform_set_drvdata(pdev, tps);
 
diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
new file mode 100644
index 000000000000..abf22acbd13e
--- /dev/null
+++ b/drivers/regulator/uniphier-regulator.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Regulator controller driver for UniPhier SoC
+// Copyright 2018 Socionext Inc.
+// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/reset.h>
+
+#define MAX_CLKS	2
+#define MAX_RSTS	2
+
+struct uniphier_regulator_soc_data {
+	int nclks;
+	const char * const *clock_names;
+	int nrsts;
+	const char * const *reset_names;
+	const struct regulator_desc *desc;
+	const struct regmap_config *regconf;
+};
+
+struct uniphier_regulator_priv {
+	struct clk_bulk_data clk[MAX_CLKS];
+	struct reset_control *rst[MAX_RSTS];
+	const struct uniphier_regulator_soc_data *data;
+};
+
+static struct regulator_ops uniphier_regulator_ops = {
+	.enable     = regulator_enable_regmap,
+	.disable    = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static int uniphier_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uniphier_regulator_priv *priv;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	struct resource *res;
+	void __iomem *base;
+	const char *name;
+	int i, ret, nr;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->data = of_device_get_match_data(dev);
+	if (WARN_ON(!priv->data))
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	for (i = 0; i < priv->data->nclks; i++)
+		priv->clk[i].id = priv->data->clock_names[i];
+	ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < priv->data->nrsts; i++) {
+		name = priv->data->reset_names[i];
+		priv->rst[i] = devm_reset_control_get_shared(dev, name);
+		if (IS_ERR(priv->rst[i]))
+			return PTR_ERR(priv->rst[i]);
+	}
+
+	ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (nr = 0; nr < priv->data->nrsts; nr++) {
+		ret = reset_control_deassert(priv->rst[nr]);
+		if (ret)
+			goto out_rst_assert;
+	}
+
+	regmap = devm_regmap_init_mmio(dev, base, priv->data->regconf);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	config.dev = dev;
+	config.driver_data = priv;
+	config.of_node = dev->of_node;
+	config.regmap = regmap;
+	config.init_data = of_get_regulator_init_data(dev, dev->of_node,
+						      priv->data->desc);
+	rdev = devm_regulator_register(dev, priv->data->desc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		goto out_rst_assert;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+
+out_rst_assert:
+	while (nr--)
+		reset_control_assert(priv->rst[nr]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return ret;
+}
+
+static int uniphier_regulator_remove(struct platform_device *pdev)
+{
+	struct uniphier_regulator_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < priv->data->nrsts; i++)
+		reset_control_assert(priv->rst[i]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return 0;
+}
+
+/* USB3 controller data */
+#define USB3VBUS_OFFSET		0x0
+#define USB3VBUS_REG		BIT(4)
+#define USB3VBUS_REG_EN		BIT(3)
+static const struct regulator_desc uniphier_usb3_regulator_desc = {
+	.name = "vbus",
+	.of_match = of_match_ptr("vbus"),
+	.ops = &uniphier_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.enable_reg  = USB3VBUS_OFFSET,
+	.enable_mask = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.enable_val  = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.disable_val = USB3VBUS_REG_EN,
+};
+
+static const struct regmap_config uniphier_usb3_regulator_regconf = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 1,
+};
+
+static const char * const uniphier_pro4_clock_reset_names[] = {
+	"gio", "link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pro4_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.clock_names = uniphier_pro4_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.reset_names = uniphier_pro4_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const char * const uniphier_pxs2_clock_reset_names[] = {
+	"link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pxs2_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.clock_names = uniphier_pxs2_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.reset_names = uniphier_pxs2_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const struct of_device_id uniphier_regulator_match[] = {
+	/* USB VBUS */
+	{
+		.compatible = "socionext,uniphier-pro4-usb3-regulator",
+		.data = &uniphier_pro4_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver uniphier_regulator_driver = {
+	.probe = uniphier_regulator_probe,
+	.remove = uniphier_regulator_remove,
+	.driver = {
+		.name  = "uniphier-regulator",
+		.of_match_table = uniphier_regulator_match,
+	},
+};
+module_platform_driver(uniphier_regulator_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier Regulator Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 5856e792d09c..ba79b609aca2 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -40,6 +40,23 @@ config QCOM_GSBI
           functions for connecting the underlying serial UART, SPI, and I2C
           devices to the output pins.
 
+config QCOM_LLCC
+	tristate "Qualcomm Technologies, Inc. LLCC driver"
+	depends on ARCH_QCOM
+	help
+	  Qualcomm Technologies, Inc. platform specific
+	  Last Level Cache Controller(LLCC) driver. This provides interfaces
+	  to clients that use the LLCC. Say yes here to enable LLCC slice
+	  driver.
+
+config QCOM_SDM845_LLCC
+	tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
+	depends on QCOM_LLCC
+	help
+	  Say yes here to enable the LLCC driver for SDM845. This provides
+	  data required to configure LLCC so that clients can start using the
+	  LLCC slices.
+
 config QCOM_MDT_LOADER
 	tristate
 	select QCOM_SCM
@@ -75,6 +92,16 @@ config QCOM_RMTFS_MEM
 
 	  Say y here if you intend to boot the modem remoteproc.
 
+config QCOM_RPMH
+	bool "Qualcomm RPM-Hardened (RPMH) Communication"
+	depends on ARCH_QCOM && ARM64 && OF || COMPILE_TEST
+	help
+	  Support for communication with the hardened-RPM blocks in
+	  Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
+	  internal bus to transmit state requests for shared resources. A set
+	  of hardware components aggregate requests for these resources and
+	  help apply the aggregated state on the resource.
+
 config QCOM_SMEM
 	tristate "Qualcomm Shared Memory Manager (SMEM)"
 	depends on ARCH_QCOM
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 19dcf957cb3a..f25b54cd6cf8 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+CFLAGS_rpmh-rsc.o := -I$(src)
 obj-$(CONFIG_QCOM_GENI_SE) +=	qcom-geni-se.o
 obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
 obj-$(CONFIG_QCOM_GLINK_SSR) +=	glink_ssr.o
@@ -8,6 +9,9 @@ obj-$(CONFIG_QCOM_PM)	+=	spm.o
 obj-$(CONFIG_QCOM_QMI_HELPERS)	+= qmi_helpers.o
 qmi_helpers-y	+= qmi_encdec.o qmi_interface.o
 obj-$(CONFIG_QCOM_RMTFS_MEM)	+= rmtfs_mem.o
+obj-$(CONFIG_QCOM_RPMH)		+= qcom_rpmh.o
+qcom_rpmh-y			+= rpmh-rsc.o
+qcom_rpmh-y			+= rpmh.o
 obj-$(CONFIG_QCOM_SMD_RPM)	+= smd-rpm.o
 obj-$(CONFIG_QCOM_SMEM) +=	smem.o
 obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
@@ -15,3 +19,5 @@ obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
 obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
 obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
 obj-$(CONFIG_QCOM_APR) += apr.o
+obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
+obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
diff --git a/drivers/soc/qcom/llcc-sdm845.c b/drivers/soc/qcom/llcc-sdm845.c
new file mode 100644
index 000000000000..2e1e4f0a5db8
--- /dev/null
+++ b/drivers/soc/qcom/llcc-sdm845.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/soc/qcom/llcc-qcom.h>
+
+/*
+ * SCT(System Cache Table) entry contains of the following members:
+ * usecase_id: Unique id for the client's use case
+ * slice_id: llcc slice id for each client
+ * max_cap: The maximum capacity of the cache slice provided in KB
+ * priority: Priority of the client used to select victim line for replacement
+ * fixed_size: Boolean indicating if the slice has a fixed capacity
+ * bonus_ways: Bonus ways are additional ways to be used for any slice,
+ *		if client ends up using more than reserved cache ways. Bonus
+ *		ways are allocated only if they are not reserved for some
+ *		other client.
+ * res_ways: Reserved ways for the cache slice, the reserved ways cannot
+ *		be used by any other client than the one its assigned to.
+ * cache_mode: Each slice operates as a cache, this controls the mode of the
+ *             slice: normal or TCM(Tightly Coupled Memory)
+ * probe_target_ways: Determines what ways to probe for access hit. When
+ *                    configured to 1 only bonus and reserved ways are probed.
+ *                    When configured to 0 all ways in llcc are probed.
+ * dis_cap_alloc: Disable capacity based allocation for a client
+ * retain_on_pc: If this bit is set and client has maintained active vote
+ *               then the ways assigned to this client are not flushed on power
+ *               collapse.
+ * activate_on_init: Activate the slice immediately after the SCT is programmed
+ */
+#define SCT_ENTRY(uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, rp, a) \
+	{					\
+		.usecase_id = uid,		\
+		.slice_id = sid,		\
+		.max_cap = mc,			\
+		.priority = p,			\
+		.fixed_size = fs,		\
+		.bonus_ways = bway,		\
+		.res_ways = rway,		\
+		.cache_mode = cmod,		\
+		.probe_target_ways = ptw,	\
+		.dis_cap_alloc = dca,		\
+		.retain_on_pc = rp,		\
+		.activate_on_init = a,		\
+	}
+
+static struct llcc_slice_config sdm845_data[] =  {
+	SCT_ENTRY(LLCC_CPUSS,    1,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 1),
+	SCT_ENTRY(LLCC_VIDSC0,   2,  512,  2, 1, 0x0,   0x0f0, 0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_VIDSC1,   3,  512,  2, 1, 0x0,   0x0f0, 0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_ROTATOR,  4,  563,  2, 1, 0x0,   0x00e, 2, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_VOICE,    5,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_AUDIO,    6,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_MDMHPGRW, 7,  1024, 2, 0, 0xfc,  0xf00, 0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_MDM,      8,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_CMPT,     10, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_GPUHTW,   11, 512,  1, 1, 0xc,   0x0,   0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_GPU,      12, 2304, 1, 0, 0xff0, 0x2,   0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_MMUHWT,   13, 256,  2, 0, 0x0,   0x1,   0, 0, 1, 0, 1),
+	SCT_ENTRY(LLCC_CMPTDMA,  15, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_DISP,     16, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_VIDFW,    17, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_MDMHPFX,  20, 1024, 2, 1, 0x0,   0xf00, 0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_MDMPNG,   21, 1024, 0, 1, 0x1e,  0x0,   0, 0, 1, 1, 0),
+	SCT_ENTRY(LLCC_AUDHW,    22, 1024, 1, 1, 0xffc, 0x2,   0, 0, 1, 1, 0),
+};
+
+static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
+{
+	return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));
+}
+
+static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
+	{ .compatible = "qcom,sdm845-llcc", },
+	{ }
+};
+
+static struct platform_driver sdm845_qcom_llcc_driver = {
+	.driver = {
+		.name = "sdm845-llcc",
+		.of_match_table = sdm845_qcom_llcc_of_match,
+	},
+	.probe = sdm845_qcom_llcc_probe,
+};
+module_platform_driver(sdm845_qcom_llcc_driver);
+
+MODULE_DESCRIPTION("QCOM sdm845 LLCC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-slice.c
new file mode 100644
index 000000000000..54063a31132f
--- /dev/null
+++ b/drivers/soc/qcom/llcc-slice.c
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/llcc-qcom.h>
+
+#define ACTIVATE                      BIT(0)
+#define DEACTIVATE                    BIT(1)
+#define ACT_CTRL_OPCODE_ACTIVATE      BIT(0)
+#define ACT_CTRL_OPCODE_DEACTIVATE    BIT(1)
+#define ACT_CTRL_ACT_TRIG             BIT(0)
+#define ACT_CTRL_OPCODE_SHIFT         0x01
+#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x02
+#define ATTR1_FIXED_SIZE_SHIFT        0x03
+#define ATTR1_PRIORITY_SHIFT          0x04
+#define ATTR1_MAX_CAP_SHIFT           0x10
+#define ATTR0_RES_WAYS_MASK           GENMASK(11, 0)
+#define ATTR0_BONUS_WAYS_MASK         GENMASK(27, 16)
+#define ATTR0_BONUS_WAYS_SHIFT        0x10
+#define LLCC_STATUS_READ_DELAY        100
+
+#define CACHE_LINE_SIZE_SHIFT         6
+
+#define LLCC_COMMON_STATUS0           0x0003000c
+#define LLCC_LB_CNT_MASK              GENMASK(31, 28)
+#define LLCC_LB_CNT_SHIFT             28
+
+#define MAX_CAP_TO_BYTES(n)           (n * SZ_1K)
+#define LLCC_TRP_ACT_CTRLn(n)         (n * SZ_4K)
+#define LLCC_TRP_STATUSn(n)           (4 + n * SZ_4K)
+#define LLCC_TRP_ATTR0_CFGn(n)        (0x21000 + SZ_8 * n)
+#define LLCC_TRP_ATTR1_CFGn(n)        (0x21004 + SZ_8 * n)
+
+#define BANK_OFFSET_STRIDE	      0x80000
+
+static struct llcc_drv_data *drv_data;
+
+static const struct regmap_config llcc_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+};
+
+/**
+ * llcc_slice_getd - get llcc slice descriptor
+ * @uid: usecase_id for the client
+ *
+ * A pointer to llcc slice descriptor will be returned on success and
+ * and error pointer is returned on failure
+ */
+struct llcc_slice_desc *llcc_slice_getd(u32 uid)
+{
+	const struct llcc_slice_config *cfg;
+	struct llcc_slice_desc *desc;
+	u32 sz, count;
+
+	cfg = drv_data->cfg;
+	sz = drv_data->cfg_size;
+
+	for (count = 0; cfg && count < sz; count++, cfg++)
+		if (cfg->usecase_id == uid)
+			break;
+
+	if (count == sz || !cfg)
+		return ERR_PTR(-ENODEV);
+
+	desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+	if (!desc)
+		return ERR_PTR(-ENOMEM);
+
+	desc->slice_id = cfg->slice_id;
+	desc->slice_size = cfg->max_cap;
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(llcc_slice_getd);
+
+/**
+ * llcc_slice_putd - llcc slice descritpor
+ * @desc: Pointer to llcc slice descriptor
+ */
+void llcc_slice_putd(struct llcc_slice_desc *desc)
+{
+	kfree(desc);
+}
+EXPORT_SYMBOL_GPL(llcc_slice_putd);
+
+static int llcc_update_act_ctrl(u32 sid,
+				u32 act_ctrl_reg_val, u32 status)
+{
+	u32 act_ctrl_reg;
+	u32 status_reg;
+	u32 slice_status;
+	int ret;
+
+	act_ctrl_reg = drv_data->bcast_off + LLCC_TRP_ACT_CTRLn(sid);
+	status_reg = drv_data->bcast_off + LLCC_TRP_STATUSn(sid);
+
+	/* Set the ACTIVE trigger */
+	act_ctrl_reg_val |= ACT_CTRL_ACT_TRIG;
+	ret = regmap_write(drv_data->regmap, act_ctrl_reg, act_ctrl_reg_val);
+	if (ret)
+		return ret;
+
+	/* Clear the ACTIVE trigger */
+	act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;
+	ret = regmap_write(drv_data->regmap, act_ctrl_reg, act_ctrl_reg_val);
+	if (ret)
+		return ret;
+
+	ret = regmap_read_poll_timeout(drv_data->regmap, status_reg,
+				      slice_status, !(slice_status & status),
+				      0, LLCC_STATUS_READ_DELAY);
+	return ret;
+}
+
+/**
+ * llcc_slice_activate - Activate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ *
+ * A value of zero will be returned on success and a negative errno will
+ * be returned in error cases
+ */
+int llcc_slice_activate(struct llcc_slice_desc *desc)
+{
+	int ret;
+	u32 act_ctrl_val;
+
+	mutex_lock(&drv_data->lock);
+	if (test_bit(desc->slice_id, drv_data->bitmap)) {
+		mutex_unlock(&drv_data->lock);
+		return 0;
+	}
+
+	act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT;
+
+	ret = llcc_update_act_ctrl(desc->slice_id, act_ctrl_val,
+				  DEACTIVATE);
+	if (ret) {
+		mutex_unlock(&drv_data->lock);
+		return ret;
+	}
+
+	__set_bit(desc->slice_id, drv_data->bitmap);
+	mutex_unlock(&drv_data->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(llcc_slice_activate);
+
+/**
+ * llcc_slice_deactivate - Deactivate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ *
+ * A value of zero will be returned on success and a negative errno will
+ * be returned in error cases
+ */
+int llcc_slice_deactivate(struct llcc_slice_desc *desc)
+{
+	u32 act_ctrl_val;
+	int ret;
+
+	mutex_lock(&drv_data->lock);
+	if (!test_bit(desc->slice_id, drv_data->bitmap)) {
+		mutex_unlock(&drv_data->lock);
+		return 0;
+	}
+	act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE << ACT_CTRL_OPCODE_SHIFT;
+
+	ret = llcc_update_act_ctrl(desc->slice_id, act_ctrl_val,
+				  ACTIVATE);
+	if (ret) {
+		mutex_unlock(&drv_data->lock);
+		return ret;
+	}
+
+	__clear_bit(desc->slice_id, drv_data->bitmap);
+	mutex_unlock(&drv_data->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(llcc_slice_deactivate);
+
+/**
+ * llcc_get_slice_id - return the slice id
+ * @desc: Pointer to llcc slice descriptor
+ */
+int llcc_get_slice_id(struct llcc_slice_desc *desc)
+{
+	return desc->slice_id;
+}
+EXPORT_SYMBOL_GPL(llcc_get_slice_id);
+
+/**
+ * llcc_get_slice_size - return the slice id
+ * @desc: Pointer to llcc slice descriptor
+ */
+size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
+{
+	return desc->slice_size;
+}
+EXPORT_SYMBOL_GPL(llcc_get_slice_size);
+
+static int qcom_llcc_cfg_program(struct platform_device *pdev)
+{
+	int i;
+	u32 attr1_cfg;
+	u32 attr0_cfg;
+	u32 attr1_val;
+	u32 attr0_val;
+	u32 max_cap_cacheline;
+	u32 sz;
+	int ret;
+	const struct llcc_slice_config *llcc_table;
+	struct llcc_slice_desc desc;
+	u32 bcast_off = drv_data->bcast_off;
+
+	sz = drv_data->cfg_size;
+	llcc_table = drv_data->cfg;
+
+	for (i = 0; i < sz; i++) {
+		attr1_cfg = bcast_off +
+				LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
+		attr0_cfg = bcast_off +
+				LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
+
+		attr1_val = llcc_table[i].cache_mode;
+		attr1_val |= llcc_table[i].probe_target_ways <<
+				ATTR1_PROBE_TARGET_WAYS_SHIFT;
+		attr1_val |= llcc_table[i].fixed_size <<
+				ATTR1_FIXED_SIZE_SHIFT;
+		attr1_val |= llcc_table[i].priority <<
+				ATTR1_PRIORITY_SHIFT;
+
+		max_cap_cacheline = MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
+
+		/* LLCC instances can vary for each target.
+		 * The SW writes to broadcast register which gets propagated
+		 * to each llcc instace (llcc0,.. llccN).
+		 * Since the size of the memory is divided equally amongst the
+		 * llcc instances, we need to configure the max cap accordingly.
+		 */
+		max_cap_cacheline = max_cap_cacheline / drv_data->num_banks;
+		max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
+		attr1_val |= max_cap_cacheline << ATTR1_MAX_CAP_SHIFT;
+
+		attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
+		attr0_val |= llcc_table[i].bonus_ways << ATTR0_BONUS_WAYS_SHIFT;
+
+		ret = regmap_write(drv_data->regmap, attr1_cfg, attr1_val);
+		if (ret)
+			return ret;
+		ret = regmap_write(drv_data->regmap, attr0_cfg, attr0_val);
+		if (ret)
+			return ret;
+		if (llcc_table[i].activate_on_init) {
+			desc.slice_id = llcc_table[i].slice_id;
+			ret = llcc_slice_activate(&desc);
+		}
+	}
+	return ret;
+}
+
+int qcom_llcc_probe(struct platform_device *pdev,
+		      const struct llcc_slice_config *llcc_cfg, u32 sz)
+{
+	u32 num_banks;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	void __iomem *base;
+	int ret, i;
+
+	drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
+	if (!drv_data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	drv_data->regmap = devm_regmap_init_mmio(dev, base,
+					&llcc_regmap_config);
+	if (IS_ERR(drv_data->regmap))
+		return PTR_ERR(drv_data->regmap);
+
+	ret = regmap_read(drv_data->regmap, LLCC_COMMON_STATUS0,
+						&num_banks);
+	if (ret)
+		return ret;
+
+	num_banks &= LLCC_LB_CNT_MASK;
+	num_banks >>= LLCC_LB_CNT_SHIFT;
+	drv_data->num_banks = num_banks;
+
+	for (i = 0; i < sz; i++)
+		if (llcc_cfg[i].slice_id > drv_data->max_slices)
+			drv_data->max_slices = llcc_cfg[i].slice_id;
+
+	drv_data->offsets = devm_kcalloc(dev, num_banks, sizeof(u32),
+							GFP_KERNEL);
+	if (!drv_data->offsets)
+		return -ENOMEM;
+
+	for (i = 0; i < num_banks; i++)
+		drv_data->offsets[i] = i * BANK_OFFSET_STRIDE;
+
+	drv_data->bcast_off = num_banks * BANK_OFFSET_STRIDE;
+
+	drv_data->bitmap = devm_kcalloc(dev,
+	BITS_TO_LONGS(drv_data->max_slices), sizeof(unsigned long),
+						GFP_KERNEL);
+	if (!drv_data->bitmap)
+		return -ENOMEM;
+
+	drv_data->cfg = llcc_cfg;
+	drv_data->cfg_size = sz;
+	mutex_init(&drv_data->lock);
+	platform_set_drvdata(pdev, drv_data);
+
+	return qcom_llcc_cfg_program(pdev);
+}
+EXPORT_SYMBOL_GPL(qcom_llcc_probe);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/rmtfs_mem.c b/drivers/soc/qcom/rmtfs_mem.c
index c8999e38b005..8a3678c2e83c 100644
--- a/drivers/soc/qcom/rmtfs_mem.c
+++ b/drivers/soc/qcom/rmtfs_mem.c
@@ -184,6 +184,7 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
 	device_initialize(&rmtfs_mem->dev);
 	rmtfs_mem->dev.parent = &pdev->dev;
 	rmtfs_mem->dev.groups = qcom_rmtfs_mem_groups;
+	rmtfs_mem->dev.release = qcom_rmtfs_mem_release_device;
 
 	rmtfs_mem->base = devm_memremap(&rmtfs_mem->dev, rmtfs_mem->addr,
 					rmtfs_mem->size, MEMREMAP_WC);
@@ -206,8 +207,6 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
 		goto put_device;
 	}
 
-	rmtfs_mem->dev.release = qcom_rmtfs_mem_release_device;
-
 	ret = of_property_read_u32(node, "qcom,vmid", &vmid);
 	if (ret < 0 && ret != -EINVAL) {
 		dev_err(&pdev->dev, "failed to parse qcom,vmid\n");
diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
new file mode 100644
index 000000000000..a7bbbb67991c
--- /dev/null
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+
+#ifndef __RPM_INTERNAL_H__
+#define __RPM_INTERNAL_H__
+
+#include <linux/bitmap.h>
+#include <soc/qcom/tcs.h>
+
+#define TCS_TYPE_NR			4
+#define MAX_CMDS_PER_TCS		16
+#define MAX_TCS_PER_TYPE		3
+#define MAX_TCS_NR			(MAX_TCS_PER_TYPE * TCS_TYPE_NR)
+#define MAX_TCS_SLOTS			(MAX_CMDS_PER_TCS * MAX_TCS_PER_TYPE)
+
+struct rsc_drv;
+
+/**
+ * struct tcs_group: group of Trigger Command Sets (TCS) to send state requests
+ * to the controller
+ *
+ * @drv:       the controller
+ * @type:      type of the TCS in this group - active, sleep, wake
+ * @mask:      mask of the TCSes relative to all the TCSes in the RSC
+ * @offset:    start of the TCS group relative to the TCSes in the RSC
+ * @num_tcs:   number of TCSes in this type
+ * @ncpt:      number of commands in each TCS
+ * @lock:      lock for synchronizing this TCS writes
+ * @req:       requests that are sent from the TCS
+ * @cmd_cache: flattened cache of cmds in sleep/wake TCS
+ * @slots:     indicates which of @cmd_addr are occupied
+ */
+struct tcs_group {
+	struct rsc_drv *drv;
+	int type;
+	u32 mask;
+	u32 offset;
+	int num_tcs;
+	int ncpt;
+	spinlock_t lock;
+	const struct tcs_request *req[MAX_TCS_PER_TYPE];
+	u32 *cmd_cache;
+	DECLARE_BITMAP(slots, MAX_TCS_SLOTS);
+};
+
+/**
+ * struct rpmh_request: the message to be sent to rpmh-rsc
+ *
+ * @msg: the request
+ * @cmd: the payload that will be part of the @msg
+ * @completion: triggered when request is done
+ * @dev: the device making the request
+ * @err: err return from the controller
+ * @needs_free: check to free dynamically allocated request object
+ */
+struct rpmh_request {
+	struct tcs_request msg;
+	struct tcs_cmd cmd[MAX_RPMH_PAYLOAD];
+	struct completion *completion;
+	const struct device *dev;
+	int err;
+	bool needs_free;
+};
+
+/**
+ * struct rpmh_ctrlr: our representation of the controller
+ *
+ * @cache: the list of cached requests
+ * @cache_lock: synchronize access to the cache data
+ * @dirty: was the cache updated since flush
+ * @batch_cache: Cache sleep and wake requests sent as batch
+ */
+struct rpmh_ctrlr {
+	struct list_head cache;
+	spinlock_t cache_lock;
+	bool dirty;
+	struct list_head batch_cache;
+};
+
+/**
+ * struct rsc_drv: the Direct Resource Voter (DRV) of the
+ * Resource State Coordinator controller (RSC)
+ *
+ * @name:       controller identifier
+ * @tcs_base:   start address of the TCS registers in this controller
+ * @id:         instance id in the controller (Direct Resource Voter)
+ * @num_tcs:    number of TCSes in this DRV
+ * @tcs:        TCS groups
+ * @tcs_in_use: s/w state of the TCS
+ * @lock:       synchronize state of the controller
+ * @client:     handle to the DRV's client.
+ */
+struct rsc_drv {
+	const char *name;
+	void __iomem *tcs_base;
+	int id;
+	int num_tcs;
+	struct tcs_group tcs[TCS_TYPE_NR];
+	DECLARE_BITMAP(tcs_in_use, MAX_TCS_NR);
+	spinlock_t lock;
+	struct rpmh_ctrlr client;
+};
+
+int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg);
+int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv,
+			     const struct tcs_request *msg);
+int rpmh_rsc_invalidate(struct rsc_drv *drv);
+
+void rpmh_tx_done(const struct tcs_request *msg, int r);
+
+#endif /* __RPM_INTERNAL_H__ */
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
new file mode 100644
index 000000000000..ee75da66d64b
--- /dev/null
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -0,0 +1,693 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#define pr_fmt(fmt) "%s " fmt, KBUILD_MODNAME
+
+#include <linux/atomic.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/tcs.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+#include "rpmh-internal.h"
+
+#define CREATE_TRACE_POINTS
+#include "trace-rpmh.h"
+
+#define RSC_DRV_TCS_OFFSET		672
+#define RSC_DRV_CMD_OFFSET		20
+
+/* DRV Configuration Information Register */
+#define DRV_PRNT_CHLD_CONFIG		0x0C
+#define DRV_NUM_TCS_MASK		0x3F
+#define DRV_NUM_TCS_SHIFT		6
+#define DRV_NCPT_MASK			0x1F
+#define DRV_NCPT_SHIFT			27
+
+/* Register offsets */
+#define RSC_DRV_IRQ_ENABLE		0x00
+#define RSC_DRV_IRQ_STATUS		0x04
+#define RSC_DRV_IRQ_CLEAR		0x08
+#define RSC_DRV_CMD_WAIT_FOR_CMPL	0x10
+#define RSC_DRV_CONTROL			0x14
+#define RSC_DRV_STATUS			0x18
+#define RSC_DRV_CMD_ENABLE		0x1C
+#define RSC_DRV_CMD_MSGID		0x30
+#define RSC_DRV_CMD_ADDR		0x34
+#define RSC_DRV_CMD_DATA		0x38
+#define RSC_DRV_CMD_STATUS		0x3C
+#define RSC_DRV_CMD_RESP_DATA		0x40
+
+#define TCS_AMC_MODE_ENABLE		BIT(16)
+#define TCS_AMC_MODE_TRIGGER		BIT(24)
+
+/* TCS CMD register bit mask */
+#define CMD_MSGID_LEN			8
+#define CMD_MSGID_RESP_REQ		BIT(8)
+#define CMD_MSGID_WRITE			BIT(16)
+#define CMD_STATUS_ISSUED		BIT(8)
+#define CMD_STATUS_COMPL		BIT(16)
+
+static u32 read_tcs_reg(struct rsc_drv *drv, int reg, int tcs_id, int cmd_id)
+{
+	return readl_relaxed(drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * tcs_id +
+			     RSC_DRV_CMD_OFFSET * cmd_id);
+}
+
+static void write_tcs_cmd(struct rsc_drv *drv, int reg, int tcs_id, int cmd_id,
+			  u32 data)
+{
+	writel_relaxed(data, drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * tcs_id +
+		       RSC_DRV_CMD_OFFSET * cmd_id);
+}
+
+static void write_tcs_reg(struct rsc_drv *drv, int reg, int tcs_id, u32 data)
+{
+	writel_relaxed(data, drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * tcs_id);
+}
+
+static void write_tcs_reg_sync(struct rsc_drv *drv, int reg, int tcs_id,
+			       u32 data)
+{
+	writel(data, drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * tcs_id);
+	for (;;) {
+		if (data == readl(drv->tcs_base + reg +
+				  RSC_DRV_TCS_OFFSET * tcs_id))
+			break;
+		udelay(1);
+	}
+}
+
+static bool tcs_is_free(struct rsc_drv *drv, int tcs_id)
+{
+	return !test_bit(tcs_id, drv->tcs_in_use) &&
+	       read_tcs_reg(drv, RSC_DRV_STATUS, tcs_id, 0);
+}
+
+static struct tcs_group *get_tcs_of_type(struct rsc_drv *drv, int type)
+{
+	return &drv->tcs[type];
+}
+
+static int tcs_invalidate(struct rsc_drv *drv, int type)
+{
+	int m;
+	struct tcs_group *tcs;
+
+	tcs = get_tcs_of_type(drv, type);
+
+	spin_lock(&tcs->lock);
+	if (bitmap_empty(tcs->slots, MAX_TCS_SLOTS)) {
+		spin_unlock(&tcs->lock);
+		return 0;
+	}
+
+	for (m = tcs->offset; m < tcs->offset + tcs->num_tcs; m++) {
+		if (!tcs_is_free(drv, m)) {
+			spin_unlock(&tcs->lock);
+			return -EAGAIN;
+		}
+		write_tcs_reg_sync(drv, RSC_DRV_CMD_ENABLE, m, 0);
+	}
+	bitmap_zero(tcs->slots, MAX_TCS_SLOTS);
+	spin_unlock(&tcs->lock);
+
+	return 0;
+}
+
+/**
+ * rpmh_rsc_invalidate - Invalidate sleep and wake TCSes
+ *
+ * @drv: the RSC controller
+ */
+int rpmh_rsc_invalidate(struct rsc_drv *drv)
+{
+	int ret;
+
+	ret = tcs_invalidate(drv, SLEEP_TCS);
+	if (!ret)
+		ret = tcs_invalidate(drv, WAKE_TCS);
+
+	return ret;
+}
+
+static struct tcs_group *get_tcs_for_msg(struct rsc_drv *drv,
+					 const struct tcs_request *msg)
+{
+	int type, ret;
+	struct tcs_group *tcs;
+
+	switch (msg->state) {
+	case RPMH_ACTIVE_ONLY_STATE:
+		type = ACTIVE_TCS;
+		break;
+	case RPMH_WAKE_ONLY_STATE:
+		type = WAKE_TCS;
+		break;
+	case RPMH_SLEEP_STATE:
+		type = SLEEP_TCS;
+		break;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	/*
+	 * If we are making an active request on a RSC that does not have a
+	 * dedicated TCS for active state use, then re-purpose a wake TCS to
+	 * send active votes.
+	 * NOTE: The driver must be aware that this RSC does not have a
+	 * dedicated AMC, and therefore would invalidate the sleep and wake
+	 * TCSes before making an active state request.
+	 */
+	tcs = get_tcs_of_type(drv, type);
+	if (msg->state == RPMH_ACTIVE_ONLY_STATE && !tcs->num_tcs) {
+		tcs = get_tcs_of_type(drv, WAKE_TCS);
+		if (tcs->num_tcs) {
+			ret = rpmh_rsc_invalidate(drv);
+			if (ret)
+				return ERR_PTR(ret);
+		}
+	}
+
+	return tcs;
+}
+
+static const struct tcs_request *get_req_from_tcs(struct rsc_drv *drv,
+						  int tcs_id)
+{
+	struct tcs_group *tcs;
+	int i;
+
+	for (i = 0; i < TCS_TYPE_NR; i++) {
+		tcs = &drv->tcs[i];
+		if (tcs->mask & BIT(tcs_id))
+			return tcs->req[tcs_id - tcs->offset];
+	}
+
+	return NULL;
+}
+
+/**
+ * tcs_tx_done: TX Done interrupt handler
+ */
+static irqreturn_t tcs_tx_done(int irq, void *p)
+{
+	struct rsc_drv *drv = p;
+	int i, j, err = 0;
+	unsigned long irq_status;
+	const struct tcs_request *req;
+	struct tcs_cmd *cmd;
+
+	irq_status = read_tcs_reg(drv, RSC_DRV_IRQ_STATUS, 0, 0);
+
+	for_each_set_bit(i, &irq_status, BITS_PER_LONG) {
+		req = get_req_from_tcs(drv, i);
+		if (!req) {
+			WARN_ON(1);
+			goto skip;
+		}
+
+		err = 0;
+		for (j = 0; j < req->num_cmds; j++) {
+			u32 sts;
+
+			cmd = &req->cmds[j];
+			sts = read_tcs_reg(drv, RSC_DRV_CMD_STATUS, i, j);
+			if (!(sts & CMD_STATUS_ISSUED) ||
+			   ((req->wait_for_compl || cmd->wait) &&
+			   !(sts & CMD_STATUS_COMPL))) {
+				pr_err("Incomplete request: %s: addr=%#x data=%#x",
+				       drv->name, cmd->addr, cmd->data);
+				err = -EIO;
+			}
+		}
+
+		trace_rpmh_tx_done(drv, i, req, err);
+skip:
+		/* Reclaim the TCS */
+		write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, i, 0);
+		write_tcs_reg(drv, RSC_DRV_IRQ_CLEAR, 0, BIT(i));
+		spin_lock(&drv->lock);
+		clear_bit(i, drv->tcs_in_use);
+		spin_unlock(&drv->lock);
+		if (req)
+			rpmh_tx_done(req, err);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
+			       const struct tcs_request *msg)
+{
+	u32 msgid, cmd_msgid;
+	u32 cmd_enable = 0;
+	u32 cmd_complete;
+	struct tcs_cmd *cmd;
+	int i, j;
+
+	cmd_msgid = CMD_MSGID_LEN;
+	cmd_msgid |= msg->wait_for_compl ? CMD_MSGID_RESP_REQ : 0;
+	cmd_msgid |= CMD_MSGID_WRITE;
+
+	cmd_complete = read_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, tcs_id, 0);
+
+	for (i = 0, j = cmd_id; i < msg->num_cmds; i++, j++) {
+		cmd = &msg->cmds[i];
+		cmd_enable |= BIT(j);
+		cmd_complete |= cmd->wait << j;
+		msgid = cmd_msgid;
+		msgid |= cmd->wait ? CMD_MSGID_RESP_REQ : 0;
+
+		write_tcs_cmd(drv, RSC_DRV_CMD_MSGID, tcs_id, j, msgid);
+		write_tcs_cmd(drv, RSC_DRV_CMD_ADDR, tcs_id, j, cmd->addr);
+		write_tcs_cmd(drv, RSC_DRV_CMD_DATA, tcs_id, j, cmd->data);
+		trace_rpmh_send_msg(drv, tcs_id, j, msgid, cmd);
+	}
+
+	write_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, tcs_id, cmd_complete);
+	cmd_enable |= read_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id, 0);
+	write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id, cmd_enable);
+}
+
+static void __tcs_trigger(struct rsc_drv *drv, int tcs_id)
+{
+	u32 enable;
+
+	/*
+	 * HW req: Clear the DRV_CONTROL and enable TCS again
+	 * While clearing ensure that the AMC mode trigger is cleared
+	 * and then the mode enable is cleared.
+	 */
+	enable = read_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, 0);
+	enable &= ~TCS_AMC_MODE_TRIGGER;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+	enable &= ~TCS_AMC_MODE_ENABLE;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+
+	/* Enable the AMC mode on the TCS and then trigger the TCS */
+	enable = TCS_AMC_MODE_ENABLE;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+	enable |= TCS_AMC_MODE_TRIGGER;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+}
+
+static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
+				  const struct tcs_request *msg)
+{
+	unsigned long curr_enabled;
+	u32 addr;
+	int i, j, k;
+	int tcs_id = tcs->offset;
+
+	for (i = 0; i < tcs->num_tcs; i++, tcs_id++) {
+		if (tcs_is_free(drv, tcs_id))
+			continue;
+
+		curr_enabled = read_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id, 0);
+
+		for_each_set_bit(j, &curr_enabled, MAX_CMDS_PER_TCS) {
+			addr = read_tcs_reg(drv, RSC_DRV_CMD_ADDR, tcs_id, j);
+			for (k = 0; k < msg->num_cmds; k++) {
+				if (addr == msg->cmds[k].addr)
+					return -EBUSY;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int find_free_tcs(struct tcs_group *tcs)
+{
+	int i;
+
+	for (i = 0; i < tcs->num_tcs; i++) {
+		if (tcs_is_free(tcs->drv, tcs->offset + i))
+			return tcs->offset + i;
+	}
+
+	return -EBUSY;
+}
+
+static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
+{
+	struct tcs_group *tcs;
+	int tcs_id;
+	unsigned long flags;
+	int ret;
+
+	tcs = get_tcs_for_msg(drv, msg);
+	if (IS_ERR(tcs))
+		return PTR_ERR(tcs);
+
+	spin_lock_irqsave(&tcs->lock, flags);
+	spin_lock(&drv->lock);
+	/*
+	 * The h/w does not like if we send a request to the same address,
+	 * when one is already in-flight or being processed.
+	 */
+	ret = check_for_req_inflight(drv, tcs, msg);
+	if (ret) {
+		spin_unlock(&drv->lock);
+		goto done_write;
+	}
+
+	tcs_id = find_free_tcs(tcs);
+	if (tcs_id < 0) {
+		ret = tcs_id;
+		spin_unlock(&drv->lock);
+		goto done_write;
+	}
+
+	tcs->req[tcs_id - tcs->offset] = msg;
+	set_bit(tcs_id, drv->tcs_in_use);
+	spin_unlock(&drv->lock);
+
+	__tcs_buffer_write(drv, tcs_id, 0, msg);
+	__tcs_trigger(drv, tcs_id);
+
+done_write:
+	spin_unlock_irqrestore(&tcs->lock, flags);
+	return ret;
+}
+
+/**
+ * rpmh_rsc_send_data: Validate the incoming message and write to the
+ * appropriate TCS block.
+ *
+ * @drv: the controller
+ * @msg: the data to be sent
+ *
+ * Return: 0 on success, -EINVAL on error.
+ * Note: This call blocks until a valid data is written to the TCS.
+ */
+int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg)
+{
+	int ret;
+
+	if (!msg || !msg->cmds || !msg->num_cmds ||
+	    msg->num_cmds > MAX_RPMH_PAYLOAD) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	do {
+		ret = tcs_write(drv, msg);
+		if (ret == -EBUSY) {
+			pr_info_ratelimited("TCS Busy, retrying RPMH message send: addr=%#x\n",
+					    msg->cmds[0].addr);
+			udelay(10);
+		}
+	} while (ret == -EBUSY);
+
+	return ret;
+}
+
+static int find_match(const struct tcs_group *tcs, const struct tcs_cmd *cmd,
+		      int len)
+{
+	int i, j;
+
+	/* Check for already cached commands */
+	for_each_set_bit(i, tcs->slots, MAX_TCS_SLOTS) {
+		if (tcs->cmd_cache[i] != cmd[0].addr)
+			continue;
+		if (i + len >= tcs->num_tcs * tcs->ncpt)
+			goto seq_err;
+		for (j = 0; j < len; j++) {
+			if (tcs->cmd_cache[i + j] != cmd[j].addr)
+				goto seq_err;
+		}
+		return i;
+	}
+
+	return -ENODATA;
+
+seq_err:
+	WARN(1, "Message does not match previous sequence.\n");
+	return -EINVAL;
+}
+
+static int find_slots(struct tcs_group *tcs, const struct tcs_request *msg,
+		      int *tcs_id, int *cmd_id)
+{
+	int slot, offset;
+	int i = 0;
+
+	/* Find if we already have the msg in our TCS */
+	slot = find_match(tcs, msg->cmds, msg->num_cmds);
+	if (slot >= 0)
+		goto copy_data;
+
+	/* Do over, until we can fit the full payload in a TCS */
+	do {
+		slot = bitmap_find_next_zero_area(tcs->slots, MAX_TCS_SLOTS,
+						  i, msg->num_cmds, 0);
+		if (slot == tcs->num_tcs * tcs->ncpt)
+			return -ENOMEM;
+		i += tcs->ncpt;
+	} while (slot + msg->num_cmds - 1 >= i);
+
+copy_data:
+	bitmap_set(tcs->slots, slot, msg->num_cmds);
+	/* Copy the addresses of the resources over to the slots */
+	for (i = 0; i < msg->num_cmds; i++)
+		tcs->cmd_cache[slot + i] = msg->cmds[i].addr;
+
+	offset = slot / tcs->ncpt;
+	*tcs_id = offset + tcs->offset;
+	*cmd_id = slot % tcs->ncpt;
+
+	return 0;
+}
+
+static int tcs_ctrl_write(struct rsc_drv *drv, const struct tcs_request *msg)
+{
+	struct tcs_group *tcs;
+	int tcs_id = 0, cmd_id = 0;
+	unsigned long flags;
+	int ret;
+
+	tcs = get_tcs_for_msg(drv, msg);
+	if (IS_ERR(tcs))
+		return PTR_ERR(tcs);
+
+	spin_lock_irqsave(&tcs->lock, flags);
+	/* find the TCS id and the command in the TCS to write to */
+	ret = find_slots(tcs, msg, &tcs_id, &cmd_id);
+	if (!ret)
+		__tcs_buffer_write(drv, tcs_id, cmd_id, msg);
+	spin_unlock_irqrestore(&tcs->lock, flags);
+
+	return ret;
+}
+
+/**
+ * rpmh_rsc_write_ctrl_data: Write request to the controller
+ *
+ * @drv: the controller
+ * @msg: the data to be written to the controller
+ *
+ * There is no response returned for writing the request to the controller.
+ */
+int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv, const struct tcs_request *msg)
+{
+	if (!msg || !msg->cmds || !msg->num_cmds ||
+	    msg->num_cmds > MAX_RPMH_PAYLOAD) {
+		pr_err("Payload error\n");
+		return -EINVAL;
+	}
+
+	/* Data sent to this API will not be sent immediately */
+	if (msg->state == RPMH_ACTIVE_ONLY_STATE)
+		return -EINVAL;
+
+	return tcs_ctrl_write(drv, msg);
+}
+
+static int rpmh_probe_tcs_config(struct platform_device *pdev,
+				 struct rsc_drv *drv)
+{
+	struct tcs_type_config {
+		u32 type;
+		u32 n;
+	} tcs_cfg[TCS_TYPE_NR] = { { 0 } };
+	struct device_node *dn = pdev->dev.of_node;
+	u32 config, max_tcs, ncpt, offset;
+	int i, ret, n, st = 0;
+	struct tcs_group *tcs;
+	struct resource *res;
+	void __iomem *base;
+	char drv_id[10] = {0};
+
+	snprintf(drv_id, ARRAY_SIZE(drv_id), "drv-%d", drv->id);
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, drv_id);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	ret = of_property_read_u32(dn, "qcom,tcs-offset", &offset);
+	if (ret)
+		return ret;
+	drv->tcs_base = base + offset;
+
+	config = readl_relaxed(base + DRV_PRNT_CHLD_CONFIG);
+
+	max_tcs = config;
+	max_tcs &= DRV_NUM_TCS_MASK << (DRV_NUM_TCS_SHIFT * drv->id);
+	max_tcs = max_tcs >> (DRV_NUM_TCS_SHIFT * drv->id);
+
+	ncpt = config & (DRV_NCPT_MASK << DRV_NCPT_SHIFT);
+	ncpt = ncpt >> DRV_NCPT_SHIFT;
+
+	n = of_property_count_u32_elems(dn, "qcom,tcs-config");
+	if (n != 2 * TCS_TYPE_NR)
+		return -EINVAL;
+
+	for (i = 0; i < TCS_TYPE_NR; i++) {
+		ret = of_property_read_u32_index(dn, "qcom,tcs-config",
+						 i * 2, &tcs_cfg[i].type);
+		if (ret)
+			return ret;
+		if (tcs_cfg[i].type >= TCS_TYPE_NR)
+			return -EINVAL;
+
+		ret = of_property_read_u32_index(dn, "qcom,tcs-config",
+						 i * 2 + 1, &tcs_cfg[i].n);
+		if (ret)
+			return ret;
+		if (tcs_cfg[i].n > MAX_TCS_PER_TYPE)
+			return -EINVAL;
+	}
+
+	for (i = 0; i < TCS_TYPE_NR; i++) {
+		tcs = &drv->tcs[tcs_cfg[i].type];
+		if (tcs->drv)
+			return -EINVAL;
+		tcs->drv = drv;
+		tcs->type = tcs_cfg[i].type;
+		tcs->num_tcs = tcs_cfg[i].n;
+		tcs->ncpt = ncpt;
+		spin_lock_init(&tcs->lock);
+
+		if (!tcs->num_tcs || tcs->type == CONTROL_TCS)
+			continue;
+
+		if (st + tcs->num_tcs > max_tcs ||
+		    st + tcs->num_tcs >= BITS_PER_BYTE * sizeof(tcs->mask))
+			return -EINVAL;
+
+		tcs->mask = ((1 << tcs->num_tcs) - 1) << st;
+		tcs->offset = st;
+		st += tcs->num_tcs;
+
+		/*
+		 * Allocate memory to cache sleep and wake requests to
+		 * avoid reading TCS register memory.
+		 */
+		if (tcs->type == ACTIVE_TCS)
+			continue;
+
+		tcs->cmd_cache = devm_kcalloc(&pdev->dev,
+					      tcs->num_tcs * ncpt, sizeof(u32),
+					      GFP_KERNEL);
+		if (!tcs->cmd_cache)
+			return -ENOMEM;
+	}
+
+	drv->num_tcs = st;
+
+	return 0;
+}
+
+static int rpmh_rsc_probe(struct platform_device *pdev)
+{
+	struct device_node *dn = pdev->dev.of_node;
+	struct rsc_drv *drv;
+	int ret, irq;
+
+	/*
+	 * Even though RPMh doesn't directly use cmd-db, all of its children
+	 * do. To avoid adding this check to our children we'll do it now.
+	 */
+	ret = cmd_db_ready();
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Command DB not available (%d)\n",
+									ret);
+		return ret;
+	}
+
+	drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	ret = of_property_read_u32(dn, "qcom,drv-id", &drv->id);
+	if (ret)
+		return ret;
+
+	drv->name = of_get_property(dn, "label", NULL);
+	if (!drv->name)
+		drv->name = dev_name(&pdev->dev);
+
+	ret = rpmh_probe_tcs_config(pdev, drv);
+	if (ret)
+		return ret;
+
+	spin_lock_init(&drv->lock);
+	bitmap_zero(drv->tcs_in_use, MAX_TCS_NR);
+
+	irq = platform_get_irq(pdev, drv->id);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(&pdev->dev, irq, tcs_tx_done,
+			       IRQF_TRIGGER_HIGH | IRQF_NO_SUSPEND,
+			       drv->name, drv);
+	if (ret)
+		return ret;
+
+	/* Enable the active TCS to send requests immediately */
+	write_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, drv->tcs[ACTIVE_TCS].mask);
+
+	spin_lock_init(&drv->client.cache_lock);
+	INIT_LIST_HEAD(&drv->client.cache);
+	INIT_LIST_HEAD(&drv->client.batch_cache);
+
+	dev_set_drvdata(&pdev->dev, drv);
+
+	return devm_of_platform_populate(&pdev->dev);
+}
+
+static const struct of_device_id rpmh_drv_match[] = {
+	{ .compatible = "qcom,rpmh-rsc", },
+	{ }
+};
+
+static struct platform_driver rpmh_driver = {
+	.probe = rpmh_rsc_probe,
+	.driver = {
+		  .name = "rpmh",
+		  .of_match_table = rpmh_drv_match,
+	},
+};
+
+static int __init rpmh_driver_init(void)
+{
+	return platform_driver_register(&rpmh_driver);
+}
+arch_initcall(rpmh_driver_init);
diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
new file mode 100644
index 000000000000..c7beb6841289
--- /dev/null
+++ b/drivers/soc/qcom/rpmh.c
@@ -0,0 +1,513 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/atomic.h>
+#include <linux/bug.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+
+#include <soc/qcom/rpmh.h>
+
+#include "rpmh-internal.h"
+
+#define RPMH_TIMEOUT_MS			msecs_to_jiffies(10000)
+
+#define DEFINE_RPMH_MSG_ONSTACK(dev, s, q, name)	\
+	struct rpmh_request name = {			\
+		.msg = {				\
+			.state = s,			\
+			.cmds = name.cmd,		\
+			.num_cmds = 0,			\
+			.wait_for_compl = true,		\
+		},					\
+		.cmd = { { 0 } },			\
+		.completion = q,			\
+		.dev = dev,				\
+		.needs_free = false,				\
+	}
+
+#define ctrlr_to_drv(ctrlr) container_of(ctrlr, struct rsc_drv, client)
+
+/**
+ * struct cache_req: the request object for caching
+ *
+ * @addr: the address of the resource
+ * @sleep_val: the sleep vote
+ * @wake_val: the wake vote
+ * @list: linked list obj
+ */
+struct cache_req {
+	u32 addr;
+	u32 sleep_val;
+	u32 wake_val;
+	struct list_head list;
+};
+
+/**
+ * struct batch_cache_req - An entry in our batch catch
+ *
+ * @list: linked list obj
+ * @count: number of messages
+ * @rpm_msgs: the messages
+ */
+
+struct batch_cache_req {
+	struct list_head list;
+	int count;
+	struct rpmh_request rpm_msgs[];
+};
+
+static struct rpmh_ctrlr *get_rpmh_ctrlr(const struct device *dev)
+{
+	struct rsc_drv *drv = dev_get_drvdata(dev->parent);
+
+	return &drv->client;
+}
+
+void rpmh_tx_done(const struct tcs_request *msg, int r)
+{
+	struct rpmh_request *rpm_msg = container_of(msg, struct rpmh_request,
+						    msg);
+	struct completion *compl = rpm_msg->completion;
+
+	rpm_msg->err = r;
+
+	if (r)
+		dev_err(rpm_msg->dev, "RPMH TX fail in msg addr=%#x, err=%d\n",
+			rpm_msg->msg.cmds[0].addr, r);
+
+	if (!compl)
+		goto exit;
+
+	/* Signal the blocking thread we are done */
+	complete(compl);
+
+exit:
+	if (rpm_msg->needs_free)
+		kfree(rpm_msg);
+}
+
+static struct cache_req *__find_req(struct rpmh_ctrlr *ctrlr, u32 addr)
+{
+	struct cache_req *p, *req = NULL;
+
+	list_for_each_entry(p, &ctrlr->cache, list) {
+		if (p->addr == addr) {
+			req = p;
+			break;
+		}
+	}
+
+	return req;
+}
+
+static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr,
+					   enum rpmh_state state,
+					   struct tcs_cmd *cmd)
+{
+	struct cache_req *req;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+	req = __find_req(ctrlr, cmd->addr);
+	if (req)
+		goto existing;
+
+	req = kzalloc(sizeof(*req), GFP_ATOMIC);
+	if (!req) {
+		req = ERR_PTR(-ENOMEM);
+		goto unlock;
+	}
+
+	req->addr = cmd->addr;
+	req->sleep_val = req->wake_val = UINT_MAX;
+	INIT_LIST_HEAD(&req->list);
+	list_add_tail(&req->list, &ctrlr->cache);
+
+existing:
+	switch (state) {
+	case RPMH_ACTIVE_ONLY_STATE:
+		if (req->sleep_val != UINT_MAX)
+			req->wake_val = cmd->data;
+		break;
+	case RPMH_WAKE_ONLY_STATE:
+		req->wake_val = cmd->data;
+		break;
+	case RPMH_SLEEP_STATE:
+		req->sleep_val = cmd->data;
+		break;
+	default:
+		break;
+	}
+
+	ctrlr->dirty = true;
+unlock:
+	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+
+	return req;
+}
+
+/**
+ * __rpmh_write: Cache and send the RPMH request
+ *
+ * @dev: The device making the request
+ * @state: Active/Sleep request type
+ * @rpm_msg: The data that needs to be sent (cmds).
+ *
+ * Cache the RPMH request and send if the state is ACTIVE_ONLY.
+ * SLEEP/WAKE_ONLY requests are not sent to the controller at
+ * this time. Use rpmh_flush() to send them to the controller.
+ */
+static int __rpmh_write(const struct device *dev, enum rpmh_state state,
+			struct rpmh_request *rpm_msg)
+{
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+	int ret = -EINVAL;
+	struct cache_req *req;
+	int i;
+
+	rpm_msg->msg.state = state;
+
+	/* Cache the request in our store and link the payload */
+	for (i = 0; i < rpm_msg->msg.num_cmds; i++) {
+		req = cache_rpm_request(ctrlr, state, &rpm_msg->msg.cmds[i]);
+		if (IS_ERR(req))
+			return PTR_ERR(req);
+	}
+
+	rpm_msg->msg.state = state;
+
+	if (state == RPMH_ACTIVE_ONLY_STATE) {
+		WARN_ON(irqs_disabled());
+		ret = rpmh_rsc_send_data(ctrlr_to_drv(ctrlr), &rpm_msg->msg);
+	} else {
+		ret = rpmh_rsc_write_ctrl_data(ctrlr_to_drv(ctrlr),
+				&rpm_msg->msg);
+		/* Clean up our call by spoofing tx_done */
+		rpmh_tx_done(&rpm_msg->msg, ret);
+	}
+
+	return ret;
+}
+
+static int __fill_rpmh_msg(struct rpmh_request *req, enum rpmh_state state,
+		const struct tcs_cmd *cmd, u32 n)
+{
+	if (!cmd || !n || n > MAX_RPMH_PAYLOAD)
+		return -EINVAL;
+
+	memcpy(req->cmd, cmd, n * sizeof(*cmd));
+
+	req->msg.state = state;
+	req->msg.cmds = req->cmd;
+	req->msg.num_cmds = n;
+
+	return 0;
+}
+
+/**
+ * rpmh_write_async: Write a set of RPMH commands
+ *
+ * @dev: The device making the request
+ * @state: Active/sleep set
+ * @cmd: The payload data
+ * @n: The number of elements in payload
+ *
+ * Write a set of RPMH commands, the order of commands is maintained
+ * and will be sent as a single shot.
+ */
+int rpmh_write_async(const struct device *dev, enum rpmh_state state,
+		     const struct tcs_cmd *cmd, u32 n)
+{
+	struct rpmh_request *rpm_msg;
+	int ret;
+
+	rpm_msg = kzalloc(sizeof(*rpm_msg), GFP_ATOMIC);
+	if (!rpm_msg)
+		return -ENOMEM;
+	rpm_msg->needs_free = true;
+
+	ret = __fill_rpmh_msg(rpm_msg, state, cmd, n);
+	if (ret) {
+		kfree(rpm_msg);
+		return ret;
+	}
+
+	return __rpmh_write(dev, state, rpm_msg);
+}
+EXPORT_SYMBOL(rpmh_write_async);
+
+/**
+ * rpmh_write: Write a set of RPMH commands and block until response
+ *
+ * @rc: The RPMH handle got from rpmh_get_client
+ * @state: Active/sleep set
+ * @cmd: The payload data
+ * @n: The number of elements in @cmd
+ *
+ * May sleep. Do not call from atomic contexts.
+ */
+int rpmh_write(const struct device *dev, enum rpmh_state state,
+	       const struct tcs_cmd *cmd, u32 n)
+{
+	DECLARE_COMPLETION_ONSTACK(compl);
+	DEFINE_RPMH_MSG_ONSTACK(dev, state, &compl, rpm_msg);
+	int ret;
+
+	if (!cmd || !n || n > MAX_RPMH_PAYLOAD)
+		return -EINVAL;
+
+	memcpy(rpm_msg.cmd, cmd, n * sizeof(*cmd));
+	rpm_msg.msg.num_cmds = n;
+
+	ret = __rpmh_write(dev, state, &rpm_msg);
+	if (ret)
+		return ret;
+
+	ret = wait_for_completion_timeout(&compl, RPMH_TIMEOUT_MS);
+	WARN_ON(!ret);
+	return (ret > 0) ? 0 : -ETIMEDOUT;
+}
+EXPORT_SYMBOL(rpmh_write);
+
+static void cache_batch(struct rpmh_ctrlr *ctrlr, struct batch_cache_req *req)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+	list_add_tail(&req->list, &ctrlr->batch_cache);
+	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+}
+
+static int flush_batch(struct rpmh_ctrlr *ctrlr)
+{
+	struct batch_cache_req *req;
+	const struct rpmh_request *rpm_msg;
+	unsigned long flags;
+	int ret = 0;
+	int i;
+
+	/* Send Sleep/Wake requests to the controller, expect no response */
+	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+	list_for_each_entry(req, &ctrlr->batch_cache, list) {
+		for (i = 0; i < req->count; i++) {
+			rpm_msg = req->rpm_msgs + i;
+			ret = rpmh_rsc_write_ctrl_data(ctrlr_to_drv(ctrlr),
+						       &rpm_msg->msg);
+			if (ret)
+				break;
+		}
+	}
+	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+
+	return ret;
+}
+
+static void invalidate_batch(struct rpmh_ctrlr *ctrlr)
+{
+	struct batch_cache_req *req, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+	list_for_each_entry_safe(req, tmp, &ctrlr->batch_cache, list)
+		kfree(req);
+	INIT_LIST_HEAD(&ctrlr->batch_cache);
+	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+}
+
+/**
+ * rpmh_write_batch: Write multiple sets of RPMH commands and wait for the
+ * batch to finish.
+ *
+ * @dev: the device making the request
+ * @state: Active/sleep set
+ * @cmd: The payload data
+ * @n: The array of count of elements in each batch, 0 terminated.
+ *
+ * Write a request to the RSC controller without caching. If the request
+ * state is ACTIVE, then the requests are treated as completion request
+ * and sent to the controller immediately. The function waits until all the
+ * commands are complete. If the request was to SLEEP or WAKE_ONLY, then the
+ * request is sent as fire-n-forget and no ack is expected.
+ *
+ * May sleep. Do not call from atomic contexts for ACTIVE_ONLY requests.
+ */
+int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
+		     const struct tcs_cmd *cmd, u32 *n)
+{
+	struct batch_cache_req *req;
+	struct rpmh_request *rpm_msgs;
+	DECLARE_COMPLETION_ONSTACK(compl);
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+	unsigned long time_left;
+	int count = 0;
+	int ret, i, j;
+
+	if (!cmd || !n)
+		return -EINVAL;
+
+	while (n[count] > 0)
+		count++;
+	if (!count)
+		return -EINVAL;
+
+	req = kzalloc(sizeof(*req) + count * sizeof(req->rpm_msgs[0]),
+		      GFP_ATOMIC);
+	if (!req)
+		return -ENOMEM;
+	req->count = count;
+	rpm_msgs = req->rpm_msgs;
+
+	for (i = 0; i < count; i++) {
+		__fill_rpmh_msg(rpm_msgs + i, state, cmd, n[i]);
+		cmd += n[i];
+	}
+
+	if (state != RPMH_ACTIVE_ONLY_STATE) {
+		cache_batch(ctrlr, req);
+		return 0;
+	}
+
+	for (i = 0; i < count; i++) {
+		rpm_msgs[i].completion = &compl;
+		ret = rpmh_rsc_send_data(ctrlr_to_drv(ctrlr), &rpm_msgs[i].msg);
+		if (ret) {
+			pr_err("Error(%d) sending RPMH message addr=%#x\n",
+			       ret, rpm_msgs[i].msg.cmds[0].addr);
+			for (j = i; j < count; j++)
+				rpmh_tx_done(&rpm_msgs[j].msg, ret);
+			break;
+		}
+	}
+
+	time_left = RPMH_TIMEOUT_MS;
+	for (i = 0; i < count; i++) {
+		time_left = wait_for_completion_timeout(&compl, time_left);
+		if (!time_left) {
+			/*
+			 * Better hope they never finish because they'll signal
+			 * the completion on our stack and that's bad once
+			 * we've returned from the function.
+			 */
+			WARN_ON(1);
+			ret = -ETIMEDOUT;
+			goto exit;
+		}
+	}
+
+exit:
+	kfree(req);
+
+	return ret;
+}
+EXPORT_SYMBOL(rpmh_write_batch);
+
+static int is_req_valid(struct cache_req *req)
+{
+	return (req->sleep_val != UINT_MAX &&
+		req->wake_val != UINT_MAX &&
+		req->sleep_val != req->wake_val);
+}
+
+static int send_single(const struct device *dev, enum rpmh_state state,
+		       u32 addr, u32 data)
+{
+	DEFINE_RPMH_MSG_ONSTACK(dev, state, NULL, rpm_msg);
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+
+	/* Wake sets are always complete and sleep sets are not */
+	rpm_msg.msg.wait_for_compl = (state == RPMH_WAKE_ONLY_STATE);
+	rpm_msg.cmd[0].addr = addr;
+	rpm_msg.cmd[0].data = data;
+	rpm_msg.msg.num_cmds = 1;
+
+	return rpmh_rsc_write_ctrl_data(ctrlr_to_drv(ctrlr), &rpm_msg.msg);
+}
+
+/**
+ * rpmh_flush: Flushes the buffered active and sleep sets to TCS
+ *
+ * @dev: The device making the request
+ *
+ * Return: -EBUSY if the controller is busy, probably waiting on a response
+ * to a RPMH request sent earlier.
+ *
+ * This function is always called from the sleep code from the last CPU
+ * that is powering down the entire system. Since no other RPMH API would be
+ * executing at this time, it is safe to run lockless.
+ */
+int rpmh_flush(const struct device *dev)
+{
+	struct cache_req *p;
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+	int ret;
+
+	if (!ctrlr->dirty) {
+		pr_debug("Skipping flush, TCS has latest data.\n");
+		return 0;
+	}
+
+	/* First flush the cached batch requests */
+	ret = flush_batch(ctrlr);
+	if (ret)
+		return ret;
+
+	/*
+	 * Nobody else should be calling this function other than system PM,
+	 * hence we can run without locks.
+	 */
+	list_for_each_entry(p, &ctrlr->cache, list) {
+		if (!is_req_valid(p)) {
+			pr_debug("%s: skipping RPMH req: a:%#x s:%#x w:%#x",
+				 __func__, p->addr, p->sleep_val, p->wake_val);
+			continue;
+		}
+		ret = send_single(dev, RPMH_SLEEP_STATE, p->addr, p->sleep_val);
+		if (ret)
+			return ret;
+		ret = send_single(dev, RPMH_WAKE_ONLY_STATE,
+				  p->addr, p->wake_val);
+		if (ret)
+			return ret;
+	}
+
+	ctrlr->dirty = false;
+
+	return 0;
+}
+EXPORT_SYMBOL(rpmh_flush);
+
+/**
+ * rpmh_invalidate: Invalidate all sleep and active sets
+ * sets.
+ *
+ * @dev: The device making the request
+ *
+ * Invalidate the sleep and active values in the TCS blocks.
+ */
+int rpmh_invalidate(const struct device *dev)
+{
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+	int ret;
+
+	invalidate_batch(ctrlr);
+	ctrlr->dirty = true;
+
+	do {
+		ret = rpmh_rsc_invalidate(ctrlr_to_drv(ctrlr));
+	} while (ret == -EAGAIN);
+
+	return ret;
+}
+EXPORT_SYMBOL(rpmh_invalidate);
diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
index 70b2ee80d6bd..bf4bd71ab53f 100644
--- a/drivers/soc/qcom/smem.c
+++ b/drivers/soc/qcom/smem.c
@@ -364,11 +364,6 @@ static int qcom_smem_alloc_private(struct qcom_smem *smem,
 	end = phdr_to_last_uncached_entry(phdr);
 	cached = phdr_to_last_cached_entry(phdr);
 
-	if (smem->global_partition) {
-		dev_err(smem->dev, "Already found the global partition\n");
-		return -EINVAL;
-	}
-
 	while (hdr < end) {
 		if (hdr->canary != SMEM_PRIVATE_CANARY)
 			goto bad_canary;
@@ -736,6 +731,11 @@ static int qcom_smem_set_global_partition(struct qcom_smem *smem)
 	bool found = false;
 	int i;
 
+	if (smem->global_partition) {
+		dev_err(smem->dev, "Already found the global partition\n");
+		return -EINVAL;
+	}
+
 	ptable = qcom_smem_get_ptable(smem);
 	if (IS_ERR(ptable))
 		return PTR_ERR(ptable);
diff --git a/drivers/soc/qcom/trace-rpmh.h b/drivers/soc/qcom/trace-rpmh.h
new file mode 100644
index 000000000000..feb0cb455e37
--- /dev/null
+++ b/drivers/soc/qcom/trace-rpmh.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#if !defined(_TRACE_RPMH_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_RPMH_H
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM rpmh
+
+#include <linux/tracepoint.h>
+#include "rpmh-internal.h"
+
+TRACE_EVENT(rpmh_tx_done,
+
+	TP_PROTO(struct rsc_drv *d, int m, const struct tcs_request *r, int e),
+
+	TP_ARGS(d, m, r, e),
+
+	TP_STRUCT__entry(
+			 __string(name, d->name)
+			 __field(int, m)
+			 __field(u32, addr)
+			 __field(u32, data)
+			 __field(int, err)
+	),
+
+	TP_fast_assign(
+		       __assign_str(name, d->name);
+		       __entry->m = m;
+		       __entry->addr = r->cmds[0].addr;
+		       __entry->data = r->cmds[0].data;
+		       __entry->err = e;
+	),
+
+	TP_printk("%s: ack: tcs-m: %d addr: %#x data: %#x errno: %d",
+		  __get_str(name), __entry->m, __entry->addr, __entry->data,
+		  __entry->err)
+);
+
+TRACE_EVENT(rpmh_send_msg,
+
+	TP_PROTO(struct rsc_drv *d, int m, int n, u32 h,
+		 const struct tcs_cmd *c),
+
+	TP_ARGS(d, m, n, h, c),
+
+	TP_STRUCT__entry(
+			 __string(name, d->name)
+			 __field(int, m)
+			 __field(int, n)
+			 __field(u32, hdr)
+			 __field(u32, addr)
+			 __field(u32, data)
+			 __field(bool, wait)
+	),
+
+	TP_fast_assign(
+		       __assign_str(name, d->name);
+		       __entry->m = m;
+		       __entry->n = n;
+		       __entry->hdr = h;
+		       __entry->addr = c->addr;
+		       __entry->data = c->data;
+		       __entry->wait = c->wait;
+	),
+
+	TP_printk("%s: send-msg: tcs(m): %d cmd(n): %d msgid: %#x addr: %#x data: %#x complete: %d",
+		  __get_str(name), __entry->m, __entry->n, __entry->hdr,
+		  __entry->addr, __entry->data, __entry->wait)
+);
+
+#endif /* _TRACE_RPMH_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace-rpmh
+
+#include <trace/define_trace.h>
diff --git a/include/dt-bindings/regulator/maxim,max77802.h b/include/dt-bindings/regulator/maxim,max77802.h
index cf28631d7109..d0baba1973d4 100644
--- a/include/dt-bindings/regulator/maxim,max77802.h
+++ b/include/dt-bindings/regulator/maxim,max77802.h
@@ -1,10 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2014 Google, Inc
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * Device Tree binding constants for the Maxim 77802 PMIC regulators
  */
 
diff --git a/include/dt-bindings/regulator/qcom,rpmh-regulator.h b/include/dt-bindings/regulator/qcom,rpmh-regulator.h
new file mode 100644
index 000000000000..86713dcf9e02
--- /dev/null
+++ b/include/dt-bindings/regulator/qcom,rpmh-regulator.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+
+#ifndef __QCOM_RPMH_REGULATOR_H
+#define __QCOM_RPMH_REGULATOR_H
+
+/*
+ * These mode constants may be used to specify modes for various RPMh regulator
+ * device tree properties (e.g. regulator-initial-mode).  Each type of regulator
+ * supports a subset of the possible modes.
+ *
+ * %RPMH_REGULATOR_MODE_RET:	Retention mode in which only an extremely small
+ *				load current is allowed.  This mode is supported
+ *				by LDO and SMPS type regulators.
+ * %RPMH_REGULATOR_MODE_LPM:	Low power mode in which a small load current is
+ *				allowed.  This mode corresponds to PFM for SMPS
+ *				and BOB type regulators.  This mode is supported
+ *				by LDO, HFSMPS, BOB, and PMIC4 FTSMPS type
+ *				regulators.
+ * %RPMH_REGULATOR_MODE_AUTO:	Auto mode in which the regulator hardware
+ *				automatically switches between LPM and HPM based
+ *				upon the real-time load current.  This mode is
+ *				supported by HFSMPS, BOB, and PMIC4 FTSMPS type
+ *				regulators.
+ * %RPMH_REGULATOR_MODE_HPM:	High power mode in which the full rated current
+ *				of the regulator is allowed.  This mode
+ *				corresponds to PWM for SMPS and BOB type
+ *				regulators.  This mode is supported by all types
+ *				of regulators.
+ */
+#define RPMH_REGULATOR_MODE_RET		0
+#define RPMH_REGULATOR_MODE_LPM		1
+#define RPMH_REGULATOR_MODE_AUTO	2
+#define RPMH_REGULATOR_MODE_HPM		3
+
+#endif
diff --git a/include/dt-bindings/soc/qcom,rpmh-rsc.h b/include/dt-bindings/soc/qcom,rpmh-rsc.h
new file mode 100644
index 000000000000..868f998ea998
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,rpmh-rsc.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DT_QCOM_RPMH_RSC_H__
+#define __DT_QCOM_RPMH_RSC_H__
+
+#define SLEEP_TCS	0
+#define WAKE_TCS	1
+#define ACTIVE_TCS	2
+#define CONTROL_TCS	3
+
+#endif /* __DT_QCOM_RPMH_RSC_H__ */
diff --git a/include/linux/device.h b/include/linux/device.h
index 055a69dbcd18..9c1c3b1d5e11 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -1316,6 +1316,7 @@ extern const char *dev_driver_string(const struct device *dev);
 struct device_link *device_link_add(struct device *consumer,
 				    struct device *supplier, u32 flags);
 void device_link_del(struct device_link *link);
+void device_link_remove(void *consumer, struct device *supplier);
 
 #ifdef CONFIG_PRINTK
 
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index b401b962afff..5d65521260b3 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -87,6 +87,10 @@ static inline int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
 static inline int
 qcom_scm_pas_auth_and_reset(u32 peripheral) { return -ENODEV; }
 static inline int qcom_scm_pas_shutdown(u32 peripheral) { return -ENODEV; }
+static inline int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
+				      unsigned int *src,
+				      struct qcom_scm_vmperm *newvm,
+				      int dest_cnt) { return -ENODEV; }
 static inline void qcom_scm_cpu_power_down(u32 flags) {}
 static inline u32 qcom_scm_get_version(void) { return 0; }
 static inline u32
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index fc2dc8df476f..0fd8fbb74763 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -46,7 +46,7 @@ enum regulator_status {
 /**
  * struct regulator_linear_range - specify linear voltage ranges
  *
- * Specify a range of voltages for regulator_map_linar_range() and
+ * Specify a range of voltages for regulator_map_linear_range() and
  * regulator_list_linear_range().
  *
  * @min_uV:  Lowest voltage in range
@@ -220,7 +220,7 @@ struct regulator_ops {
 	/* set regulator suspend operating mode (defined in consumer.h) */
 	int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
 
-	int (*resume_early)(struct regulator_dev *rdev);
+	int (*resume)(struct regulator_dev *rdev);
 
 	int (*set_pull_down) (struct regulator_dev *);
 };
diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h
index e0ccf46f66cf..cb5aecd40f07 100644
--- a/include/linux/regulator/pfuze100.h
+++ b/include/linux/regulator/pfuze100.h
@@ -64,6 +64,17 @@
 #define PFUZE3000_VLDO3		11
 #define PFUZE3000_VLDO4		12
 
+#define PFUZE3001_SW1		0
+#define PFUZE3001_SW2		1
+#define PFUZE3001_SW3		2
+#define PFUZE3001_VSNVS		3
+#define PFUZE3001_VLDO1		4
+#define PFUZE3001_VLDO2		5
+#define PFUZE3001_VCCSD		6
+#define PFUZE3001_V33		7
+#define PFUZE3001_VLDO3		8
+#define PFUZE3001_VLDO4		9
+
 struct regulator_init_data;
 
 struct pfuze_regulator_platform_data {
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
new file mode 100644
index 000000000000..7e3b9c605ab2
--- /dev/null
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -0,0 +1,180 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <linux/platform_device.h>
+#ifndef __LLCC_QCOM__
+#define __LLCC_QCOM__
+
+#define LLCC_CPUSS       1
+#define LLCC_VIDSC0      2
+#define LLCC_VIDSC1      3
+#define LLCC_ROTATOR     4
+#define LLCC_VOICE       5
+#define LLCC_AUDIO       6
+#define LLCC_MDMHPGRW    7
+#define LLCC_MDM         8
+#define LLCC_CMPT        10
+#define LLCC_GPUHTW      11
+#define LLCC_GPU         12
+#define LLCC_MMUHWT      13
+#define LLCC_CMPTDMA     15
+#define LLCC_DISP        16
+#define LLCC_VIDFW       17
+#define LLCC_MDMHPFX     20
+#define LLCC_MDMPNG      21
+#define LLCC_AUDHW       22
+
+/**
+ * llcc_slice_desc - Cache slice descriptor
+ * @slice_id: llcc slice id
+ * @slice_size: Size allocated for the llcc slice
+ */
+struct llcc_slice_desc {
+	u32 slice_id;
+	size_t slice_size;
+};
+
+/**
+ * llcc_slice_config - Data associated with the llcc slice
+ * @usecase_id: usecase id for which the llcc slice is used
+ * @slice_id: llcc slice id assigned to each slice
+ * @max_cap: maximum capacity of the llcc slice
+ * @priority: priority of the llcc slice
+ * @fixed_size: whether the llcc slice can grow beyond its size
+ * @bonus_ways: bonus ways associated with llcc slice
+ * @res_ways: reserved ways associated with llcc slice
+ * @cache_mode: mode of the llcc slice
+ * @probe_target_ways: Probe only reserved and bonus ways on a cache miss
+ * @dis_cap_alloc: Disable capacity based allocation
+ * @retain_on_pc: Retain through power collapse
+ * @activate_on_init: activate the slice on init
+ */
+struct llcc_slice_config {
+	u32 usecase_id;
+	u32 slice_id;
+	u32 max_cap;
+	u32 priority;
+	bool fixed_size;
+	u32 bonus_ways;
+	u32 res_ways;
+	u32 cache_mode;
+	u32 probe_target_ways;
+	bool dis_cap_alloc;
+	bool retain_on_pc;
+	bool activate_on_init;
+};
+
+/**
+ * llcc_drv_data - Data associated with the llcc driver
+ * @regmap: regmap associated with the llcc device
+ * @cfg: pointer to the data structure for slice configuration
+ * @lock: mutex associated with each slice
+ * @cfg_size: size of the config data table
+ * @max_slices: max slices as read from device tree
+ * @bcast_off: Offset of the broadcast bank
+ * @num_banks: Number of llcc banks
+ * @bitmap: Bit map to track the active slice ids
+ * @offsets: Pointer to the bank offsets array
+ */
+struct llcc_drv_data {
+	struct regmap *regmap;
+	const struct llcc_slice_config *cfg;
+	struct mutex lock;
+	u32 cfg_size;
+	u32 max_slices;
+	u32 bcast_off;
+	u32 num_banks;
+	unsigned long *bitmap;
+	u32 *offsets;
+};
+
+#if IS_ENABLED(CONFIG_QCOM_LLCC)
+/**
+ * llcc_slice_getd - get llcc slice descriptor
+ * @uid: usecase_id of the client
+ */
+struct llcc_slice_desc *llcc_slice_getd(u32 uid);
+
+/**
+ * llcc_slice_putd - llcc slice descritpor
+ * @desc: Pointer to llcc slice descriptor
+ */
+void llcc_slice_putd(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_get_slice_id - get slice id
+ * @desc: Pointer to llcc slice descriptor
+ */
+int llcc_get_slice_id(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_get_slice_size - llcc slice size
+ * @desc: Pointer to llcc slice descriptor
+ */
+size_t llcc_get_slice_size(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_slice_activate - Activate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ */
+int llcc_slice_activate(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_slice_deactivate - Deactivate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ */
+int llcc_slice_deactivate(struct llcc_slice_desc *desc);
+
+/**
+ * qcom_llcc_probe - program the sct table
+ * @pdev: platform device pointer
+ * @table: soc sct table
+ * @sz: Size of the config table
+ */
+int qcom_llcc_probe(struct platform_device *pdev,
+		      const struct llcc_slice_config *table, u32 sz);
+#else
+static inline struct llcc_slice_desc *llcc_slice_getd(u32 uid)
+{
+	return NULL;
+}
+
+static inline void llcc_slice_putd(struct llcc_slice_desc *desc)
+{
+
+};
+
+static inline int llcc_get_slice_id(struct llcc_slice_desc *desc)
+{
+	return -EINVAL;
+}
+
+static inline size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
+{
+	return 0;
+}
+static inline int llcc_slice_activate(struct llcc_slice_desc *desc)
+{
+	return -EINVAL;
+}
+
+static inline int llcc_slice_deactivate(struct llcc_slice_desc *desc)
+{
+	return -EINVAL;
+}
+static inline int qcom_llcc_probe(struct platform_device *pdev,
+		      const struct llcc_slice_config *table, u32 sz)
+{
+	return -ENODEV;
+}
+
+static inline int qcom_llcc_remove(struct platform_device *pdev)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif
diff --git a/include/soc/qcom/rpmh.h b/include/soc/qcom/rpmh.h
new file mode 100644
index 000000000000..619e07c75da9
--- /dev/null
+++ b/include/soc/qcom/rpmh.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __SOC_QCOM_RPMH_H__
+#define __SOC_QCOM_RPMH_H__
+
+#include <soc/qcom/tcs.h>
+#include <linux/platform_device.h>
+
+
+#if IS_ENABLED(CONFIG_QCOM_RPMH)
+int rpmh_write(const struct device *dev, enum rpmh_state state,
+	       const struct tcs_cmd *cmd, u32 n);
+
+int rpmh_write_async(const struct device *dev, enum rpmh_state state,
+		     const struct tcs_cmd *cmd, u32 n);
+
+int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
+		     const struct tcs_cmd *cmd, u32 *n);
+
+int rpmh_flush(const struct device *dev);
+
+int rpmh_invalidate(const struct device *dev);
+
+#else
+
+static inline int rpmh_write(const struct device *dev, enum rpmh_state state,
+			     const struct tcs_cmd *cmd, u32 n)
+{ return -ENODEV; }
+
+static inline int rpmh_write_async(const struct device *dev,
+				   enum rpmh_state state,
+				   const struct tcs_cmd *cmd, u32 n)
+{ return -ENODEV; }
+
+static inline int rpmh_write_batch(const struct device *dev,
+				   enum rpmh_state state,
+				   const struct tcs_cmd *cmd, u32 *n)
+{ return -ENODEV; }
+
+static inline int rpmh_flush(const struct device *dev)
+{ return -ENODEV; }
+
+static inline int rpmh_invalidate(const struct device *dev)
+{ return -ENODEV; }
+
+#endif /* CONFIG_QCOM_RPMH */
+
+#endif /* __SOC_QCOM_RPMH_H__ */
diff --git a/include/soc/qcom/tcs.h b/include/soc/qcom/tcs.h
new file mode 100644
index 000000000000..262876a59e86
--- /dev/null
+++ b/include/soc/qcom/tcs.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __SOC_QCOM_TCS_H__
+#define __SOC_QCOM_TCS_H__
+
+#define MAX_RPMH_PAYLOAD	16
+
+/**
+ * rpmh_state: state for the request
+ *
+ * RPMH_SLEEP_STATE:       State of the resource when the processor subsystem
+ *                         is powered down. There is no client using the
+ *                         resource actively.
+ * RPMH_WAKE_ONLY_STATE:   Resume resource state to the value previously
+ *                         requested before the processor was powered down.
+ * RPMH_ACTIVE_ONLY_STATE: Active or AMC mode requests. Resource state
+ *                         is aggregated immediately.
+ */
+enum rpmh_state {
+	RPMH_SLEEP_STATE,
+	RPMH_WAKE_ONLY_STATE,
+	RPMH_ACTIVE_ONLY_STATE,
+};
+
+/**
+ * struct tcs_cmd: an individual request to RPMH.
+ *
+ * @addr: the address of the resource slv_id:18:16 | offset:0:15
+ * @data: the resource state request
+ * @wait: wait for this request to be complete before sending the next
+ */
+struct tcs_cmd {
+	u32 addr;
+	u32 data;
+	u32 wait;
+};
+
+/**
+ * struct tcs_request: A set of tcs_cmds sent together in a TCS
+ *
+ * @state:          state for the request.
+ * @wait_for_compl: wait until we get a response from the h/w accelerator
+ * @num_cmds:       the number of @cmds in this request
+ * @cmds:           an array of tcs_cmds
+ */
+struct tcs_request {
+	enum rpmh_state state;
+	u32 wait_for_compl;
+	u32 num_cmds;
+	struct tcs_cmd *cmds;
+};
+
+#endif /* __SOC_QCOM_TCS_H__ */