diff options
| author | Kishon Vijay Abraham I <kishon@ti.com> | 2018-04-27 17:17:14 +0530 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2018-05-03 09:36:19 +0200 |
| commit | c16bc9a7678a27ece028dcbfea8df2049a65dbec (patch) | |
| tree | a10e422764f1fce70cca5902848bba6cf8695e57 | |
| parent | 1d3a2220c2a1ab864caf4a64dee745d287089238 (diff) | |
| download | linux-c16bc9a7678a27ece028dcbfea8df2049a65dbec.tar.bz2 | |
mmc: sdhci: Disable 1.8v modes (HS200/HS400/UHS) if controller can't support 1.8v
The SDHCI controller in a SoC might support HS200/HS400 (indicated
using mmc-hs200-1_8v/mmc-hs400-1_8v dt property), but if the board is
modeled such that the IO lines are not connected to 1.8v then
HS200/HS400 cannot be supported. Disable HS200/HS400 if the board
does not have 1.8v connected to the IO lines. Also Disable DDR/UHS in 1.8v
if the IO lines are not connected to 1.8v.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 10 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 4 |
2 files changed, 14 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 2ededa7f43df..0f3cdca3e769 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -3672,6 +3672,16 @@ int sdhci_setup_host(struct sdhci_host *host) if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V) { host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); + /* + * The SDHCI controller in a SoC might support HS200/HS400 + * (indicated using mmc-hs200-1_8v/mmc-hs400-1_8v dt property), + * but if the board is modeled such that the IO lines are not + * connected to 1.8v then HS200/HS400 cannot be supported. + * Disable HS200/HS400 if the board does not have 1.8v connected + * to the IO lines. (Applicable for other modes in 1.8v) + */ + mmc->caps2 &= ~(MMC_CAP2_HSX00_1_8V | MMC_CAP2_HS400_ES); + mmc->caps &= ~(MMC_CAP_1_8V_DDR | MMC_CAP_UHS); } /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 85146235231e..4e80c199c9c2 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -320,6 +320,9 @@ struct mmc_host { #define MMC_CAP_UHS_SDR50 (1 << 18) /* Host supports UHS SDR50 mode */ #define MMC_CAP_UHS_SDR104 (1 << 19) /* Host supports UHS SDR104 mode */ #define MMC_CAP_UHS_DDR50 (1 << 20) /* Host supports UHS DDR50 mode */ +#define MMC_CAP_UHS (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | \ + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | \ + MMC_CAP_UHS_DDR50) /* (1 << 21) is free for reuse */ #define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */ #define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */ @@ -345,6 +348,7 @@ struct mmc_host { #define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */ #define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \ MMC_CAP2_HS400_1_2V) +#define MMC_CAP2_HSX00_1_8V (MMC_CAP2_HS200_1_8V_SDR | MMC_CAP2_HS400_1_8V) #define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V) #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ |