diff options
| author | Murali Krishna Policharla <murali.policharla@broadcom.com> | 2020-03-27 21:55:40 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2020-03-27 16:07:24 -0700 |
| commit | ab41ca3455a208392ce95f4086d5708dc37bff86 (patch) | |
| tree | c784a5ae81ff8d6a7d1d2f20864a2aa6ea10d912 | |
| parent | 22f33971aa47a9868453850c434bbc080b804133 (diff) | |
| download | linux-ab41ca3455a208392ce95f4086d5708dc37bff86.tar.bz2 | |
net: phy: bcm7xx: add jumbo frame configuration to PHY
The BCM7XX PHY family requires special configuration to pass jumbo
frames. Do that during initial PHY setup.
Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | drivers/net/phy/bcm-phy-lib.c | 22 | ||||
| -rw-r--r-- | drivers/net/phy/bcm-phy-lib.h | 1 | ||||
| -rw-r--r-- | drivers/net/phy/bcm7xxx.c | 4 | ||||
| -rw-r--r-- | include/linux/brcmphy.h | 2 |
4 files changed, 29 insertions, 0 deletions
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c index e0d3310957ff..e77b274a09fd 100644 --- a/drivers/net/phy/bcm-phy-lib.c +++ b/drivers/net/phy/bcm-phy-lib.c @@ -423,6 +423,28 @@ int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev) } EXPORT_SYMBOL_GPL(bcm_phy_28nm_a0b0_afe_config_init); +int bcm_phy_enable_jumbo(struct phy_device *phydev) +{ + int ret; + + ret = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL); + if (ret < 0) + return ret; + + /* Enable extended length packet reception */ + ret = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL, + ret | MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN); + if (ret < 0) + return ret; + + /* Enable the elastic FIFO for raising the transmission limit from + * 4.5KB to 10KB, at the expense of an additional 16 ns in propagation + * latency. + */ + return phy_set_bits(phydev, MII_BCM54XX_ECR, MII_BCM54XX_ECR_FIFOE); +} +EXPORT_SYMBOL_GPL(bcm_phy_enable_jumbo); + MODULE_DESCRIPTION("Broadcom PHY Library"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Broadcom Corporation"); diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h index c86fb9d1240c..129df819be8c 100644 --- a/drivers/net/phy/bcm-phy-lib.h +++ b/drivers/net/phy/bcm-phy-lib.h @@ -65,5 +65,6 @@ void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow, struct ethtool_stats *stats, u64 *data); void bcm_phy_r_rc_cal_reset(struct phy_device *phydev); int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev); +int bcm_phy_enable_jumbo(struct phy_device *phydev); #endif /* _LINUX_BCM_PHY_LIB_H */ diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index af8eabe7a6d4..692048d86ab1 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -181,6 +181,10 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev) if (ret) return ret; + ret = bcm_phy_enable_jumbo(phydev); + if (ret) + return ret; + ret = bcm_phy_downshift_get(phydev, &count); if (ret) return ret; diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index b475e7f20d28..6462c5447872 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -79,6 +79,7 @@ #define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */ #define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */ #define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */ +#define MII_BCM54XX_ECR_FIFOE 0x0001 /* FIFO elasticity */ #define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */ #define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */ @@ -119,6 +120,7 @@ #define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x00 #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 +#define MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN 0x4000 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010 |