summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSergey Senozhatsky <sergey.senozhatsky@gmail.com>2014-08-06 16:09:21 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-08-06 18:01:24 -0700
commit62e7ca5280fd8cbf523970757e13f0324ce0daa0 (patch)
tree868d7046eec27d64a88f6c3299eb85b2032538a3
parent0f9859ca92c9182bcb8f18c55cae1a04627cbb59 (diff)
downloadlinux-62e7ca5280fd8cbf523970757e13f0324ce0daa0.tar.bz2
zlib: clean up some dead code
Cleanup unused `if 0'-ed functions, which have been dead since 2006 (commits 87c2ce3b9305 ("lib/zlib*: cleanups") by Adrian Bunk and 4f3865fb57a0 ("zlib_inflate: Upgrade library code to a recent version") by Richard Purdie): - zlib_deflateSetDictionary - zlib_deflateParams - zlib_deflateCopy - zlib_inflateSync - zlib_syncsearch - zlib_inflateSetDictionary - zlib_inflatePrime Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--include/linux/zlib.h118
-rw-r--r--lib/zlib_deflate/deflate.c143
-rw-r--r--lib/zlib_inflate/inflate.c132
3 files changed, 0 insertions, 393 deletions
diff --git a/include/linux/zlib.h b/include/linux/zlib.h
index 9c5a6b4de0a3..197abb2a54c5 100644
--- a/include/linux/zlib.h
+++ b/include/linux/zlib.h
@@ -493,64 +493,6 @@ extern int deflateInit2 (z_streamp strm,
method). msg is set to null if there is no error message. deflateInit2 does
not perform any compression: this will be done by deflate().
*/
-
-#if 0
-extern int zlib_deflateSetDictionary (z_streamp strm,
- const Byte *dictionary,
- uInt dictLength);
-#endif
-/*
- Initializes the compression dictionary from the given byte sequence
- without producing any compressed output. This function must be called
- immediately after deflateInit, deflateInit2 or deflateReset, before any
- call of deflate. The compressor and decompressor must use exactly the same
- dictionary (see inflateSetDictionary).
-
- The dictionary should consist of strings (byte sequences) that are likely
- to be encountered later in the data to be compressed, with the most commonly
- used strings preferably put towards the end of the dictionary. Using a
- dictionary is most useful when the data to be compressed is short and can be
- predicted with good accuracy; the data can then be compressed better than
- with the default empty dictionary.
-
- Depending on the size of the compression data structures selected by
- deflateInit or deflateInit2, a part of the dictionary may in effect be
- discarded, for example if the dictionary is larger than the window size in
- deflate or deflate2. Thus the strings most likely to be useful should be
- put at the end of the dictionary, not at the front.
-
- Upon return of this function, strm->adler is set to the Adler32 value
- of the dictionary; the decompressor may later use this value to determine
- which dictionary has been used by the compressor. (The Adler32 value
- applies to the whole dictionary even if only a subset of the dictionary is
- actually used by the compressor.)
-
- deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
- inconsistent (for example if deflate has already been called for this stream
- or if the compression method is bsort). deflateSetDictionary does not
- perform any compression: this will be done by deflate().
-*/
-
-#if 0
-extern int zlib_deflateCopy (z_streamp dest, z_streamp source);
-#endif
-
-/*
- Sets the destination stream as a complete copy of the source stream.
-
- This function can be useful when several compression strategies will be
- tried, for example when there are several ways of pre-processing the input
- data with a filter. The streams that will be discarded should then be freed
- by calling deflateEnd. Note that deflateCopy duplicates the internal
- compression state which can be quite large, so this strategy is slow and
- can consume lots of memory.
-
- deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being NULL). msg is left unchanged in both source and
- destination.
-*/
extern int zlib_deflateReset (z_streamp strm);
/*
@@ -568,27 +510,6 @@ static inline unsigned long deflateBound(unsigned long s)
return s + ((s + 7) >> 3) + ((s + 63) >> 6) + 11;
}
-#if 0
-extern int zlib_deflateParams (z_streamp strm, int level, int strategy);
-#endif
-/*
- Dynamically update the compression level and compression strategy. The
- interpretation of level and strategy is as in deflateInit2. This can be
- used to switch between compression and straight copy of the input data, or
- to switch to a different kind of input data requiring a different
- strategy. If the compression level is changed, the input available so far
- is compressed with the old level (and may be flushed); the new level will
- take effect only at the next call of deflate().
-
- Before the call of deflateParams, the stream state must be set as for
- a call of deflate(), since the currently available input may have to
- be compressed and flushed. In particular, strm->avail_out must be non-zero.
-
- deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
- stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
- if strm->avail_out was zero.
-*/
-
/*
extern int inflateInit2 (z_streamp strm, int windowBits);
@@ -631,45 +552,6 @@ extern int inflateInit2 (z_streamp strm, int windowBits);
and avail_out are unchanged.)
*/
-extern int zlib_inflateSetDictionary (z_streamp strm,
- const Byte *dictionary,
- uInt dictLength);
-/*
- Initializes the decompression dictionary from the given uncompressed byte
- sequence. This function must be called immediately after a call of inflate,
- if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
- can be determined from the adler32 value returned by that call of inflate.
- The compressor and decompressor must use exactly the same dictionary (see
- deflateSetDictionary). For raw inflate, this function can be called
- immediately after inflateInit2() or inflateReset() and before any call of
- inflate() to set the dictionary. The application must insure that the
- dictionary that was used for compression is provided.
-
- inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
- inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
- expected one (incorrect adler32 value). inflateSetDictionary does not
- perform any decompression: this will be done by subsequent calls of
- inflate().
-*/
-
-#if 0
-extern int zlib_inflateSync (z_streamp strm);
-#endif
-/*
- Skips invalid compressed data until a full flush point (see above the
- description of deflate with Z_FULL_FLUSH) can be found, or until all
- available input is skipped. No output is provided.
-
- inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
- if no more input was provided, Z_DATA_ERROR if no flush point has been found,
- or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
- case, the application may save the current current value of total_in which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call inflateSync, providing more input each time,
- until success or end of the input data.
-*/
-
extern int zlib_inflateReset (z_streamp strm);
/*
This function is equivalent to inflateEnd followed by inflateInit,
diff --git a/lib/zlib_deflate/deflate.c b/lib/zlib_deflate/deflate.c
index d63381e8e333..d20ef458f137 100644
--- a/lib/zlib_deflate/deflate.c
+++ b/lib/zlib_deflate/deflate.c
@@ -250,52 +250,6 @@ int zlib_deflateInit2(
}
/* ========================================================================= */
-#if 0
-int zlib_deflateSetDictionary(
- z_streamp strm,
- const Byte *dictionary,
- uInt dictLength
-)
-{
- deflate_state *s;
- uInt length = dictLength;
- uInt n;
- IPos hash_head = 0;
-
- if (strm == NULL || strm->state == NULL || dictionary == NULL)
- return Z_STREAM_ERROR;
-
- s = (deflate_state *) strm->state;
- if (s->status != INIT_STATE) return Z_STREAM_ERROR;
-
- strm->adler = zlib_adler32(strm->adler, dictionary, dictLength);
-
- if (length < MIN_MATCH) return Z_OK;
- if (length > MAX_DIST(s)) {
- length = MAX_DIST(s);
-#ifndef USE_DICT_HEAD
- dictionary += dictLength - length; /* use the tail of the dictionary */
-#endif
- }
- memcpy((char *)s->window, dictionary, length);
- s->strstart = length;
- s->block_start = (long)length;
-
- /* Insert all strings in the hash table (except for the last two bytes).
- * s->lookahead stays null, so s->ins_h will be recomputed at the next
- * call of fill_window.
- */
- s->ins_h = s->window[0];
- UPDATE_HASH(s, s->ins_h, s->window[1]);
- for (n = 0; n <= length - MIN_MATCH; n++) {
- INSERT_STRING(s, n, hash_head);
- }
- if (hash_head) hash_head = 0; /* to make compiler happy */
- return Z_OK;
-}
-#endif /* 0 */
-
-/* ========================================================================= */
int zlib_deflateReset(
z_streamp strm
)
@@ -326,45 +280,6 @@ int zlib_deflateReset(
return Z_OK;
}
-/* ========================================================================= */
-#if 0
-int zlib_deflateParams(
- z_streamp strm,
- int level,
- int strategy
-)
-{
- deflate_state *s;
- compress_func func;
- int err = Z_OK;
-
- if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
- s = (deflate_state *) strm->state;
-
- if (level == Z_DEFAULT_COMPRESSION) {
- level = 6;
- }
- if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
- return Z_STREAM_ERROR;
- }
- func = configuration_table[s->level].func;
-
- if (func != configuration_table[level].func && strm->total_in != 0) {
- /* Flush the last buffer: */
- err = zlib_deflate(strm, Z_PARTIAL_FLUSH);
- }
- if (s->level != level) {
- s->level = level;
- s->max_lazy_match = configuration_table[level].max_lazy;
- s->good_match = configuration_table[level].good_length;
- s->nice_match = configuration_table[level].nice_length;
- s->max_chain_length = configuration_table[level].max_chain;
- }
- s->strategy = strategy;
- return err;
-}
-#endif /* 0 */
-
/* =========================================================================
* Put a short in the pending buffer. The 16-bit value is put in MSB order.
* IN assertion: the stream state is correct and there is enough room in
@@ -568,64 +483,6 @@ int zlib_deflateEnd(
return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
}
-/* =========================================================================
- * Copy the source state to the destination state.
- */
-#if 0
-int zlib_deflateCopy (
- z_streamp dest,
- z_streamp source
-)
-{
-#ifdef MAXSEG_64K
- return Z_STREAM_ERROR;
-#else
- deflate_state *ds;
- deflate_state *ss;
- ush *overlay;
- deflate_workspace *mem;
-
-
- if (source == NULL || dest == NULL || source->state == NULL) {
- return Z_STREAM_ERROR;
- }
-
- ss = (deflate_state *) source->state;
-
- *dest = *source;
-
- mem = (deflate_workspace *) dest->workspace;
-
- ds = &(mem->deflate_memory);
-
- dest->state = (struct internal_state *) ds;
- *ds = *ss;
- ds->strm = dest;
-
- ds->window = (Byte *) mem->window_memory;
- ds->prev = (Pos *) mem->prev_memory;
- ds->head = (Pos *) mem->head_memory;
- overlay = (ush *) mem->overlay_memory;
- ds->pending_buf = (uch *) overlay;
-
- memcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
- memcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
- memcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
- memcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
-
- ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
- ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
- ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
-
- ds->l_desc.dyn_tree = ds->dyn_ltree;
- ds->d_desc.dyn_tree = ds->dyn_dtree;
- ds->bl_desc.dyn_tree = ds->bl_tree;
-
- return Z_OK;
-#endif
-}
-#endif /* 0 */
-
/* ===========================================================================
* Read a new buffer from the current input stream, update the adler32
* and total number of bytes read. All deflate() input goes through
diff --git a/lib/zlib_inflate/inflate.c b/lib/zlib_inflate/inflate.c
index f5ce87b0800e..58a733b10387 100644
--- a/lib/zlib_inflate/inflate.c
+++ b/lib/zlib_inflate/inflate.c
@@ -45,21 +45,6 @@ int zlib_inflateReset(z_streamp strm)
return Z_OK;
}
-#if 0
-int zlib_inflatePrime(z_streamp strm, int bits, int value)
-{
- struct inflate_state *state;
-
- if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
- state = (struct inflate_state *)strm->state;
- if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
- value &= (1L << bits) - 1;
- state->hold += value << state->bits;
- state->bits += bits;
- return Z_OK;
-}
-#endif
-
int zlib_inflateInit2(z_streamp strm, int windowBits)
{
struct inflate_state *state;
@@ -761,123 +746,6 @@ int zlib_inflateEnd(z_streamp strm)
return Z_OK;
}
-#if 0
-int zlib_inflateSetDictionary(z_streamp strm, const Byte *dictionary,
- uInt dictLength)
-{
- struct inflate_state *state;
- unsigned long id;
-
- /* check state */
- if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
- state = (struct inflate_state *)strm->state;
- if (state->wrap != 0 && state->mode != DICT)
- return Z_STREAM_ERROR;
-
- /* check for correct dictionary id */
- if (state->mode == DICT) {
- id = zlib_adler32(0L, NULL, 0);
- id = zlib_adler32(id, dictionary, dictLength);
- if (id != state->check)
- return Z_DATA_ERROR;
- }
-
- /* copy dictionary to window */
- zlib_updatewindow(strm, strm->avail_out);
-
- if (dictLength > state->wsize) {
- memcpy(state->window, dictionary + dictLength - state->wsize,
- state->wsize);
- state->whave = state->wsize;
- }
- else {
- memcpy(state->window + state->wsize - dictLength, dictionary,
- dictLength);
- state->whave = dictLength;
- }
- state->havedict = 1;
- return Z_OK;
-}
-#endif
-
-#if 0
-/*
- Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found
- or when out of input. When called, *have is the number of pattern bytes
- found in order so far, in 0..3. On return *have is updated to the new
- state. If on return *have equals four, then the pattern was found and the
- return value is how many bytes were read including the last byte of the
- pattern. If *have is less than four, then the pattern has not been found
- yet and the return value is len. In the latter case, zlib_syncsearch() can be
- called again with more data and the *have state. *have is initialized to
- zero for the first call.
- */
-static unsigned zlib_syncsearch(unsigned *have, unsigned char *buf,
- unsigned len)
-{
- unsigned got;
- unsigned next;
-
- got = *have;
- next = 0;
- while (next < len && got < 4) {
- if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
- got++;
- else if (buf[next])
- got = 0;
- else
- got = 4 - got;
- next++;
- }
- *have = got;
- return next;
-}
-#endif
-
-#if 0
-int zlib_inflateSync(z_streamp strm)
-{
- unsigned len; /* number of bytes to look at or looked at */
- unsigned long in, out; /* temporary to save total_in and total_out */
- unsigned char buf[4]; /* to restore bit buffer to byte string */
- struct inflate_state *state;
-
- /* check parameters */
- if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
- state = (struct inflate_state *)strm->state;
- if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
-
- /* if first time, start search in bit buffer */
- if (state->mode != SYNC) {
- state->mode = SYNC;
- state->hold <<= state->bits & 7;
- state->bits -= state->bits & 7;
- len = 0;
- while (state->bits >= 8) {
- buf[len++] = (unsigned char)(state->hold);
- state->hold >>= 8;
- state->bits -= 8;
- }
- state->have = 0;
- zlib_syncsearch(&(state->have), buf, len);
- }
-
- /* search available input */
- len = zlib_syncsearch(&(state->have), strm->next_in, strm->avail_in);
- strm->avail_in -= len;
- strm->next_in += len;
- strm->total_in += len;
-
- /* return no joy or set up to restart inflate() on a new block */
- if (state->have != 4) return Z_DATA_ERROR;
- in = strm->total_in; out = strm->total_out;
- zlib_inflateReset(strm);
- strm->total_in = in; strm->total_out = out;
- state->mode = TYPE;
- return Z_OK;
-}
-#endif
-
/*
* This subroutine adds the data at next_in/avail_in to the output history
* without performing any output. The output buffer must be "caught up";