Merge branch 'stmmac-dwc-qos-ACPI-device-support'

Ajay Gupta says:

====================
net: stmmac: dwc-qos: ACPI device support

Version 3 of patches have fixes for comments from Jakub Kicinski.

These two changes are needed to enable ACPI based devices to use stmmac
driver. First patch is to use generic device api (device_*) instead of
device tree based api (of_*). Second patch avoids clock and reset accesses
for Tegra ACPI based devices. ACPI interface will be used to access clock
and reset for Tegra ACPI devices in later patches.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 15 insertions, 9 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
index dd9967aeda22..2342d497348e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
@@ -40,7 +40,7 @@ struct tegra_eqos {
 static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
 				   struct plat_stmmacenet_data *plat_dat)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
 	u32 burst_map = 0;
 	u32 bit_index = 0;
 	u32 a_index = 0;
@@ -52,9 +52,10 @@ static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
 			return -ENOMEM;
 	}
 
-	plat_dat->axi->axi_lpi_en = of_property_read_bool(np, "snps,en-lpi");
-	if (of_property_read_u32(np, "snps,write-requests",
-				 &plat_dat->axi->axi_wr_osr_lmt)) {
+	plat_dat->axi->axi_lpi_en = device_property_read_bool(dev,
+							      "snps,en-lpi");
+	if (device_property_read_u32(dev, "snps,write-requests",
+				     &plat_dat->axi->axi_wr_osr_lmt)) {
 		/**
 		 * Since the register has a reset value of 1, if property
 		 * is missing, default to 1.
@@ -68,8 +69,8 @@ static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
 		plat_dat->axi->axi_wr_osr_lmt--;
 	}
 
-	if (of_property_read_u32(np, "snps,read-requests",
-				 &plat_dat->axi->axi_rd_osr_lmt)) {
+	if (device_property_read_u32(dev, "snps,read-requests",
+				     &plat_dat->axi->axi_rd_osr_lmt)) {
 		/**
 		 * Since the register has a reset value of 1, if property
 		 * is missing, default to 1.
@@ -82,7 +83,7 @@ static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
 		 */
 		plat_dat->axi->axi_rd_osr_lmt--;
 	}
-	of_property_read_u32(np, "snps,burst-map", &burst_map);
+	device_property_read_u32(dev, "snps,burst-map", &burst_map);
 
 	/* converts burst-map bitmask to burst array */
 	for (bit_index = 0; bit_index < 7; bit_index++) {
@@ -270,6 +271,7 @@ static void *tegra_eqos_probe(struct platform_device *pdev,
 			      struct plat_stmmacenet_data *data,
 			      struct stmmac_resources *res)
 {
+	struct device *dev = &pdev->dev;
 	struct tegra_eqos *eqos;
 	int err;
 
@@ -282,6 +284,9 @@ static void *tegra_eqos_probe(struct platform_device *pdev,
 	eqos->dev = &pdev->dev;
 	eqos->regs = res->addr;
 
+	if (!is_of_node(dev->fwnode))
+		goto bypass_clk_reset_gpio;
+
 	eqos->clk_master = devm_clk_get(&pdev->dev, "master_bus");
 	if (IS_ERR(eqos->clk_master)) {
 		err = PTR_ERR(eqos->clk_master);
@@ -354,6 +359,7 @@ static void *tegra_eqos_probe(struct platform_device *pdev,
 
 	usleep_range(2000, 4000);
 
+bypass_clk_reset_gpio:
 	data->fix_mac_speed = tegra_eqos_fix_speed;
 	data->init = tegra_eqos_init;
 	data->bsp_priv = eqos;
@@ -421,7 +427,7 @@ static int dwc_eth_dwmac_probe(struct platform_device *pdev)
 	void *priv;
 	int ret;
 
-	data = of_device_get_match_data(&pdev->dev);
+	data = device_get_match_data(&pdev->dev);
 
 	memset(&stmmac_res, 0, sizeof(struct stmmac_resources));
 
@@ -478,7 +484,7 @@ static int dwc_eth_dwmac_remove(struct platform_device *pdev)
 	const struct dwc_eth_dwmac_data *data;
 	int err;
 
-	data = of_device_get_match_data(&pdev->dev);
+	data = device_get_match_data(&pdev->dev);
 
 	err = stmmac_dvr_remove(&pdev->dev);
 	if (err < 0)