diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-22 20:46:06 -1000 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-22 20:46:06 -1000 |
| commit | 14b661ebb6cfa386afa5a5247eb09e24d420af3a (patch) | |
| tree | 3917a344c6fc46b2365077e99a27d84b9e2f2675 | |
| parent | 3f3211e755f329c56acf55faa0dbf91befd7b5ca (diff) | |
| parent | 1530578abdac4edce9244c7a1962ded3ffdb58ce (diff) | |
| download | linux-14b661ebb6cfa386afa5a5247eb09e24d420af3a.tar.bz2 | |
Merge tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd
Pull MTD updates from Richard Weinberger:
"General changes:
- Unconfuse get_unmapped_area and point/unpoint driver methods
- New partition parser: sharpslpart
- Kill GENERIC_IO
- Various fixes
NAND changes:
- Add a flag to mark NANDs that require 3 address cycles to encode a
page address
- Set a default ECC/free layout when NAND_ECC_NONE is requested
- Fix a bug in panic_nand_write()
- Another batch of cleanups for the denali driver
- Fix PM support in the atmel driver
- Remove support for platform data in the omap driver
- Fix subpage write in the omap driver
- Fix irq handling in the mtk driver
- Change link order of mtk_ecc and mtk_nand drivers to speed up boot
time
- Change log level of ECC error messages in the mxc driver
- Patch the pxa3xx driver to support Armada 8k platforms
- Add BAM DMA support to the qcom driver
- Convert gpio-nand to the GPIO desc API
- Fix ECC handling in the mt29f driver
SPI-NOR changes:
- Introduce system power management support
- New mechanism to select the proper .quad_enable() hook by JEDEC
ID, when needed, instead of only by manufacturer ID
- Add support to new memory parts from Gigadevice, Winbond, Macronix
and Everspin
- Maintainance for Cadence, Intel, Mediatek and STM32 drivers"
* tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd: (85 commits)
mtd: Avoid probe failures when mtd->dbg.dfs_dir is invalid
mtd: sharpslpart: Add sharpslpart partition parser
mtd: Add sanity checks in mtd_write/read_oob()
mtd: remove the get_unmapped_area method
mtd: implement mtd_get_unmapped_area() using the point method
mtd: chips/map_rom.c: implement point and unpoint methods
mtd: chips/map_ram.c: implement point and unpoint methods
mtd: mtdram: properly handle the phys argument in the point method
mtd: mtdswap: fix spelling mistake: 'TRESHOLD' -> 'THRESHOLD'
mtd: slram: use memremap() instead of ioremap()
kconfig: kill off GENERIC_IO option
mtd: Fix C++ comment in include/linux/mtd/mtd.h
mtd: constify mtd_partition
mtd: plat-ram: Replace manual resource management by devm
mtd: nand: Fix writing mtdoops to nand flash.
mtd: intel-spi: Add Intel Lewisburg PCH SPI super SKU PCI ID
mtd: nand: mtk: fix infinite ECC decode IRQ issue
mtd: spi-nor: Add support for mr25h128
mtd: nand: mtk: change the compile sequence of mtk_nand.o and mtk_ecc.o
mtd: spi-nor: enable 4B opcodes for mx66l51235l
...
67 files changed, 1648 insertions, 754 deletions
diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt index f248056da24c..bb2075df9b38 100644 --- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt @@ -1,7 +1,9 @@ * Cadence Quad SPI controller Required properties: -- compatible : Should be "cdns,qspi-nor". +- compatible : should be one of the following: + Generic default - "cdns,qspi-nor". + For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor". - reg : Contains two entries, each of which is a tuple consisting of a physical address and length. The first entry is the address and length of the controller register set. The second entry is the @@ -14,6 +16,9 @@ Required properties: Optional properties: - cdns,is-decoded-cs : Flag to indicate whether decoder is used or not. +- cdns,rclk-en : Flag to indicate that QSPI return clock is used to latch + the read data rather than the QSPI clock. Make sure that QSPI return + clock is populated on the board before using this property. Optional subnodes: Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index 504291d2e5c2..0ee8edb60efc 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -29,7 +29,7 @@ nand: nand@ff900000 { #address-cells = <1>; #size-cells = <1>; compatible = "altr,socfpga-denali-nand"; - reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; + reg = <0xff900000 0x20>, <0xffb80000 0x1000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 144 4>; }; diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index 4cab5d85cf6f..376fa2f50e6b 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -14,6 +14,7 @@ Required properties: at25df641 at26df081a en25s64 + mr25h128 mr25h256 mr25h10 mr25h40 diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt index 840f9405dcf0..56d3668e2c50 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt @@ -1,13 +1,16 @@ * Serial NOR flash controller for MTK MT81xx (and similar) Required properties: -- compatible: The possible values are: - "mediatek,mt2701-nor" - "mediatek,mt7623-nor" +- compatible: For mt8173, compatible should be "mediatek,mt8173-nor", + and it's the fallback compatible for other Soc. + For every other SoC, should contain both the SoC-specific compatible + string and "mediatek,mt8173-nor". + The possible values are: + "mediatek,mt2701-nor", "mediatek,mt8173-nor" + "mediatek,mt2712-nor", "mediatek,mt8173-nor" + "mediatek,mt7622-nor", "mediatek,mt8173-nor" + "mediatek,mt7623-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - For mt8173, compatible should be "mediatek,mt8173-nor". - For every other SoC, should contain both the SoC-specific compatible string - and "mediatek,mt8173-nor". - reg: physical base address and length of the controller's register - clocks: the phandle of the clocks needed by the nor controller - clock-names: the names of the clocks diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt index d9b655f11048..d4ee4da58463 100644 --- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt +++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -5,9 +5,13 @@ Required properties: - compatible: Should be set to one of the following: marvell,pxa3xx-nand marvell,armada370-nand + marvell,armada-8k-nand - reg: The register base for the controller - interrupts: The interrupt to map - #address-cells: Set to <1> if the node includes partitions + - marvell,system-controller: Set to retrieve the syscon node that handles + NAND controller related registers (only required + with marvell,armada-8k-nand compatible). Optional properties: diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c index b592f79a1742..fa8e7dd4d898 100644 --- a/arch/arm/mach-pxa/cm-x255.c +++ b/arch/arm/mach-pxa/cm-x255.c @@ -14,7 +14,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/nand-gpio.h> - +#include <linux/gpio/machine.h> #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> @@ -176,6 +176,17 @@ static inline void cmx255_init_nor(void) {} #endif #if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE) + +static struct gpiod_lookup_table cmx255_nand_gpiod_table = { + .dev_id = "gpio-nand", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CS, "nce", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CLE, "cle", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_NAND_ALE, "ale", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_NAND_RB, "rdy", GPIO_ACTIVE_HIGH), + }, +}; + static struct resource cmx255_nand_resource[] = { [0] = { .start = PXA_CS1_PHYS, @@ -198,11 +209,6 @@ static struct mtd_partition cmx255_nand_parts[] = { }; static struct gpio_nand_platdata cmx255_nand_platdata = { - .gpio_nce = GPIO_NAND_CS, - .gpio_cle = GPIO_NAND_CLE, - .gpio_ale = GPIO_NAND_ALE, - .gpio_rdy = GPIO_NAND_RB, - .gpio_nwp = -1, .parts = cmx255_nand_parts, .num_parts = ARRAY_SIZE(cmx255_nand_parts), .chip_delay = 25, @@ -220,6 +226,7 @@ static struct platform_device cmx255_nand = { static void __init cmx255_init_nand(void) { + gpiod_add_lookup_table(&cmx255_nand_gpiod_table); platform_device_register(&cmx255_nand); } #else diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common index d9280482a2f8..c68add8df3ae 100644 --- a/arch/um/Kconfig.common +++ b/arch/um/Kconfig.common @@ -10,7 +10,6 @@ config UML select HAVE_DEBUG_KMEMLEAK select GENERIC_IRQ_SHOW select GENERIC_CPU_DEVICES - select GENERIC_IO select GENERIC_CLOCKEVENTS select HAVE_GCC_PLUGINS select TTY # Needed for line.c diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 5a2d71729b9a..2a8ac6829d42 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -1,6 +1,5 @@ menuconfig MTD tristate "Memory Technology Device (MTD) support" - depends on GENERIC_IO help Memory Technology Devices are flash, RAM and similar chips, often used for solid state file systems on embedded devices. This option diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c index afb43d5e1782..1cd0fff0e940 100644 --- a/drivers/mtd/chips/map_ram.c +++ b/drivers/mtd/chips/map_ram.c @@ -20,8 +20,9 @@ static int mapram_write (struct mtd_info *, loff_t, size_t, size_t *, const u_ch static int mapram_erase (struct mtd_info *, struct erase_info *); static void mapram_nop (struct mtd_info *); static struct mtd_info *map_ram_probe(struct map_info *map); -static unsigned long mapram_unmapped_area(struct mtd_info *, unsigned long, - unsigned long, unsigned long); +static int mapram_point (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); +static int mapram_unpoint(struct mtd_info *mtd, loff_t from, size_t len); static struct mtd_chip_driver mapram_chipdrv = { @@ -65,11 +66,12 @@ static struct mtd_info *map_ram_probe(struct map_info *map) mtd->type = MTD_RAM; mtd->size = map->size; mtd->_erase = mapram_erase; - mtd->_get_unmapped_area = mapram_unmapped_area; mtd->_read = mapram_read; mtd->_write = mapram_write; mtd->_panic_write = mapram_write; + mtd->_point = mapram_point; mtd->_sync = mapram_nop; + mtd->_unpoint = mapram_unpoint; mtd->flags = MTD_CAP_RAM; mtd->writesize = 1; @@ -81,19 +83,23 @@ static struct mtd_info *map_ram_probe(struct map_info *map) return mtd; } - -/* - * Allow NOMMU mmap() to directly map the device (if not NULL) - * - return the address to which the offset maps - * - return -ENOSYS to indicate refusal to do the mapping - */ -static unsigned long mapram_unmapped_area(struct mtd_info *mtd, - unsigned long len, - unsigned long offset, - unsigned long flags) +static int mapram_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys) { struct map_info *map = mtd->priv; - return (unsigned long) map->virt + offset; + + if (!map->virt) + return -EINVAL; + *virt = map->virt + from; + if (phys) + *phys = map->phys + from; + *retlen = len; + return 0; +} + +static int mapram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +{ + return 0; } static int mapram_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c index e67f73ab44c9..20e3604b4d71 100644 --- a/drivers/mtd/chips/map_rom.c +++ b/drivers/mtd/chips/map_rom.c @@ -20,8 +20,10 @@ static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_ch static void maprom_nop (struct mtd_info *); static struct mtd_info *map_rom_probe(struct map_info *map); static int maprom_erase (struct mtd_info *mtd, struct erase_info *info); -static unsigned long maprom_unmapped_area(struct mtd_info *, unsigned long, - unsigned long, unsigned long); +static int maprom_point (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); +static int maprom_unpoint(struct mtd_info *mtd, loff_t from, size_t len); + static struct mtd_chip_driver maprom_chipdrv = { .probe = map_rom_probe, @@ -51,7 +53,8 @@ static struct mtd_info *map_rom_probe(struct map_info *map) mtd->name = map->name; mtd->type = MTD_ROM; mtd->size = map->size; - mtd->_get_unmapped_area = maprom_unmapped_area; + mtd->_point = maprom_point; + mtd->_unpoint = maprom_unpoint; mtd->_read = maprom_read; mtd->_write = maprom_write; mtd->_sync = maprom_nop; @@ -66,18 +69,23 @@ static struct mtd_info *map_rom_probe(struct map_info *map) } -/* - * Allow NOMMU mmap() to directly map the device (if not NULL) - * - return the address to which the offset maps - * - return -ENOSYS to indicate refusal to do the mapping - */ -static unsigned long maprom_unmapped_area(struct mtd_info *mtd, - unsigned long len, - unsigned long offset, - unsigned long flags) +static int maprom_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys) { struct map_info *map = mtd->priv; - return (unsigned long) map->virt + offset; + + if (!map->virt) + return -EINVAL; + *virt = map->virt + from; + if (phys) + *phys = map->phys + from; + *retlen = len; + return 0; +} + +static int maprom_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +{ + return 0; } static int maprom_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index 84b16133554b..0806f72102c0 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -1814,8 +1814,13 @@ static void __init doc_dbg_register(struct mtd_info *floor) struct dentry *root = floor->dbg.dfs_dir; struct docg3 *docg3 = floor->priv; - if (IS_ERR_OR_NULL(root)) + if (IS_ERR_OR_NULL(root)) { + if (IS_ENABLED(CONFIG_DEBUG_FS) && + !IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER)) + dev_warn(floor->dev.parent, + "CONFIG_MTD_PARTITIONED_MASTER must be enabled to expose debugfs stuff\n"); return; + } debugfs_create_file("docg3_flashcontrol", S_IRUSR, root, docg3, &flashcontrol_fops); diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index 268aae45b514..555b94406e0b 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -583,7 +583,7 @@ static struct mtd_erase_region_info erase_regions[] = { } }; -static struct mtd_partition lart_partitions[] = { +static const struct mtd_partition lart_partitions[] = { /* blob */ { .name = "blob", diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 00eea6fd379c..dbe6a1de2bb8 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -359,6 +359,7 @@ static const struct spi_device_id m25p_ids[] = { {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, /* Everspin MRAMs (non-JEDEC) */ + { "mr25h128" }, /* 128 Kib, 40 MHz */ { "mr25h256" }, /* 256 Kib, 40 MHz */ { "mr25h10" }, /* 1 Mib, 40 MHz */ { "mr25h40" }, /* 4 Mib, 40 MHz */ diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index cbd8547d7aad..0bf4aeaf0cb8 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c @@ -13,6 +13,7 @@ #include <linux/slab.h> #include <linux/ioport.h> #include <linux/vmalloc.h> +#include <linux/mm.h> #include <linux/init.h> #include <linux/mtd/mtd.h> #include <linux/mtd/mtdram.h> @@ -69,6 +70,27 @@ static int ram_point(struct mtd_info *mtd, loff_t from, size_t len, { *virt = mtd->priv + from; *retlen = len; + + if (phys) { + /* limit retlen to the number of contiguous physical pages */ + unsigned long page_ofs = offset_in_page(*virt); + void *addr = *virt - page_ofs; + unsigned long pfn1, pfn0 = vmalloc_to_pfn(addr); + + *phys = __pfn_to_phys(pfn0) + page_ofs; + len += page_ofs; + while (len > PAGE_SIZE) { + len -= PAGE_SIZE; + addr += PAGE_SIZE; + pfn0++; + pfn1 = vmalloc_to_pfn(addr); + if (pfn1 != pfn0) { + *retlen = addr - *virt; + break; + } + } + } + return 0; } @@ -77,19 +99,6 @@ static int ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) return 0; } -/* - * Allow NOMMU mmap() to directly map the device (if not NULL) - * - return the address to which the offset maps - * - return -ENOSYS to indicate refusal to do the mapping - */ -static unsigned long ram_get_unmapped_area(struct mtd_info *mtd, - unsigned long len, - unsigned long offset, - unsigned long flags) -{ - return (unsigned long) mtd->priv + offset; -} - static int ram_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { @@ -134,7 +143,6 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, mtd->_erase = ram_erase; mtd->_point = ram_point; mtd->_unpoint = ram_unpoint; - mtd->_get_unmapped_area = ram_get_unmapped_area; mtd->_read = ram_read; mtd->_write = ram_write; diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 8087c36dc693..0ec85f316d24 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -163,8 +163,9 @@ static int register_device(char *name, unsigned long start, unsigned long length } if (!(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start = - ioremap(start, length))) { - E("slram: ioremap failed\n"); + memremap(start, length, + MEMREMAP_WB | MEMREMAP_WT | MEMREMAP_WC))) { + E("slram: memremap failed\n"); return -EIO; } ((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end = @@ -186,7 +187,7 @@ static int register_device(char *name, unsigned long start, unsigned long length if (mtd_device_register((*curmtd)->mtdinfo, NULL, 0)) { E("slram: Failed to register new device\n"); - iounmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start); + memunmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start); kfree((*curmtd)->mtdinfo->priv); kfree((*curmtd)->mtdinfo); return(-EAGAIN); @@ -206,7 +207,7 @@ static void unregister_devices(void) while (slram_mtdlist) { nextitem = slram_mtdlist->next; mtd_device_unregister(slram_mtdlist->mtdinfo); - iounmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start); + memunmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start); kfree(slram_mtdlist->mtdinfo->priv); kfree(slram_mtdlist->mtdinfo); kfree(slram_mtdlist); diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c index d504b3d1791d..70f488628464 100644 --- a/drivers/mtd/maps/cfi_flagadm.c +++ b/drivers/mtd/maps/cfi_flagadm.c @@ -61,7 +61,7 @@ static struct map_info flagadm_map = { .bankwidth = 2, }; -static struct mtd_partition flagadm_parts[] = { +static const struct mtd_partition flagadm_parts[] = { { .name = "Bootloader", .offset = FLASH_PARTITION0_ADDR, diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c index 15bbda03be65..a0b8fa7849a9 100644 --- a/drivers/mtd/maps/impa7.c +++ b/drivers/mtd/maps/impa7.c @@ -47,7 +47,7 @@ static struct map_info impa7_map[NUM_FLASHBANKS] = { /* * MTD partitioning stuff */ -static struct mtd_partition partitions[] = +static const struct mtd_partition partitions[] = { { .name = "FileSystem", diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c index 81dc2598bc0a..3528497f96c7 100644 --- a/drivers/mtd/maps/netsc520.c +++ b/drivers/mtd/maps/netsc520.c @@ -52,7 +52,7 @@ /* partition_info gives details on the logical partitions that the split the * single flash device into. If the size if zero we use up to the end of the * device. */ -static struct mtd_partition partition_info[]={ +static const struct mtd_partition partition_info[] = { { .name = "NetSc520 boot kernel", .offset = 0, diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c index a577ef8553d0..729579fb654f 100644 --- a/drivers/mtd/maps/nettel.c +++ b/drivers/mtd/maps/nettel.c @@ -107,7 +107,7 @@ static struct map_info nettel_amd_map = { .bankwidth = AMD_BUSWIDTH, }; -static struct mtd_partition nettel_amd_partitions[] = { +static const struct mtd_partition nettel_amd_partitions[] = { { .name = "SnapGear BIOS config", .offset = 0x000e0000, diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 51572895c02c..6d9a4d6f9839 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -43,7 +43,6 @@ struct platram_info { struct device *dev; struct mtd_info *mtd; struct map_info map; - struct resource *area; struct platdata_mtd_ram *pdata; }; @@ -97,16 +96,6 @@ static int platram_remove(struct platform_device *pdev) platram_setrw(info, PLATRAM_RO); - /* release resources */ - - if (info->area) { - release_resource(info->area); - kfree(info->area); - } - - if (info->map.virt != NULL) - iounmap(info->map.virt); - kfree(info); return 0; @@ -147,12 +136,11 @@ static int platram_probe(struct platform_device *pdev) info->pdata = pdata; /* get the resource for the memory mapping */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - if (res == NULL) { - dev_err(&pdev->dev, "no memory resource specified\n"); - err = -ENOENT; + info->map.virt = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(info->map.virt)) { + err = PTR_ERR(info->map.virt); + dev_err(&pdev->dev, "failed to ioremap() region\n"); goto exit_free; } @@ -167,26 +155,8 @@ static int platram_probe(struct platform_device *pdev) (char *)pdata->mapname : (char *)pdev->name; info->map.bankwidth = pdata->bankwidth; - /* register our usage of the memory area */ - - info->area = request_mem_region(res->start, info->map.size, pdev->name); - if (info->area == NULL) { - dev_err(&pdev->dev, "failed to request memory region\n"); - err = -EIO; - goto exit_free; - } - - /* remap the memory area */ - - info->map.virt = ioremap(res->start, info->map.size); dev_dbg(&pdev->dev, "virt %p, %lu bytes\n", info->map.virt, info->map.size); - if (info->map.virt == NULL) { - dev_err(&pdev->dev, "failed to ioremap() region\n"); - err = -EIO; - goto exit_free; - } - simple_map_init(&info->map); dev_dbg(&pdev->dev, "initialised map, probing for mtd\n"); diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c index 556a2dfe94c5..4337d279ad83 100644 --- a/drivers/mtd/maps/sbc_gxx.c +++ b/drivers/mtd/maps/sbc_gxx.c @@ -87,7 +87,7 @@ static DEFINE_SPINLOCK(sbc_gxx_spin); /* partition_info gives details on the logical partitions that the split the * single flash device into. If the size if zero we use up to the end of the * device. */ -static struct mtd_partition partition_info[]={ +static const struct mtd_partition partition_info[] = { { .name = "SBC-GXx flash boot partition", .offset = 0, .size = BOOT_PARTITION_SIZE_KiB*1024 }, diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c index 9969fedb1f13..8f177e0acb8c 100644 --- a/drivers/mtd/maps/ts5500_flash.c +++ b/drivers/mtd/maps/ts5500_flash.c @@ -43,7 +43,7 @@ static struct map_info ts5500_map = { .phys = WINDOW_ADDR }; -static struct mtd_partition ts5500_partitions[] = { +static const struct mtd_partition ts5500_partitions[] = { { .name = "Drive A", .offset = 0, diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index 00a8190797ec..aef030ca8601 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -49,7 +49,7 @@ static struct mtd_info *uclinux_ram_mtdinfo; /****************************************************************************/ -static struct mtd_partition uclinux_romfs[] = { +static const struct mtd_partition uclinux_romfs[] = { { .name = "ROMfs" } }; diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index d573606b91c2..60bf53df5454 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -644,32 +644,6 @@ static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs) } /* - * try to support NOMMU mmaps on concatenated devices - * - we don't support subdev spanning as we can't guarantee it'll work - */ -static unsigned long concat_get_unmapped_area(struct mtd_info *mtd, - unsigned long len, - unsigned long offset, - unsigned long flags) -{ - struct mtd_concat *concat = CONCAT(mtd); - int i; - - for (i = 0; i < concat->num_subdev; i++) { - struct mtd_info *subdev = concat->subdev[i]; - - if (offset >= subdev->size) { - offset -= subdev->size; - continue; - } - - return mtd_get_unmapped_area(subdev, len, offset, flags); - } - - return (unsigned long) -ENOSYS; -} - -/* * This function constructs a virtual MTD device by concatenating * num_devs MTD devices. A pointer to the new device object is * stored to *new_dev upon success. This function does _not_ @@ -790,7 +764,6 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c concat->mtd._unlock = concat_unlock; concat->mtd._suspend = concat_suspend; concat->mtd._resume = concat_resume; - concat->mtd._get_unmapped_area = concat_get_unmapped_area; /* * Combine the erase block size info of the subdevices: diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index e7ea842ba3db..f80e911b8843 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1022,11 +1022,18 @@ EXPORT_SYMBOL_GPL(mtd_unpoint); unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len, unsigned long offset, unsigned long flags) { - if (!mtd->_get_unmapped_area) - return -EOPNOTSUPP; - if (offset >= mtd->size || len > mtd->size - offset) - return -EINVAL; - return mtd->_get_unmapped_area(mtd, len, offset, flags); + size_t retlen; + void *virt; + int ret; + + ret = mtd_point(mtd, offset, len, &retlen, &virt, NULL); + if (ret) + return ret; + if (retlen != len) { + mtd_unpoint(mtd, offset, retlen); + return -ENOSYS; + } + return (unsigned long)virt; } EXPORT_SYMBOL_GPL(mtd_get_unmapped_area); @@ -1093,6 +1100,39 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, } EXPORT_SYMBOL_GPL(mtd_panic_write); +static int mtd_check_oob_ops(struct mtd_info *mtd, loff_t offs, + struct mtd_oob_ops *ops) +{ + /* + * Some users are setting ->datbuf or ->oobbuf to NULL, but are leaving + * ->len or ->ooblen uninitialized. Force ->len and ->ooblen to 0 in + * this case. + */ + if (!ops->datbuf) + ops->len = 0; + + if (!ops->oobbuf) + ops->ooblen = 0; + + if (offs < 0 || offs + ops->len >= mtd->size) + return -EINVAL; + + if (ops->ooblen) { + u64 maxooblen; + + if (ops->ooboffs >= mtd_oobavail(mtd, ops)) + return -EINVAL; + + maxooblen = ((mtd_div_by_ws(mtd->size, mtd) - + mtd_div_by_ws(offs, mtd)) * + mtd_oobavail(mtd, ops)) - ops->ooboffs; + if (ops->ooblen > maxooblen) + return -EINVAL; + } + + return 0; +} + int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { int ret_code; @@ -1100,6 +1140,10 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) if (!mtd->_read_oob) return -EOPNOTSUPP; + ret_code = mtd_check_oob_ops(mtd, from, ops); + if (ret_code) + return ret_code; + ledtrig_mtd_activity(); /* * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics @@ -1119,11 +1163,18 @@ EXPORT_SYMBOL_GPL(mtd_read_oob); int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { + int ret; + ops->retlen = ops->oobretlen = 0; if (!mtd->_write_oob) return -EOPNOTSUPP; if (!(mtd->flags & MTD_WRITEABLE)) return -EROFS; + + ret = mtd_check_oob_ops(mtd, to, ops); + if (ret) + return ret; + ledtrig_mtd_activity(); return mtd->_write_oob(mtd, to, ops); } diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index a308e707392d..be088bccd593 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -101,18 +101,6 @@ static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len) return part->parent->_unpoint(part->parent, from + part->offset, len); } -static unsigned long part_get_unmapped_area(struct mtd_info *mtd, - unsigned long len, - unsigned long offset, - unsigned long flags) -{ - struct mtd_part *part = mtd_to_part(mtd); - - offset += part->offset; - return part->parent->_get_unmapped_area(part->parent, len, offset, - flags); -} - static int part_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { @@ -458,8 +446,6 @@ static struct mtd_part *allocate_partition(struct mtd_info *parent, slave->mtd._unpoint = part_unpoint; } - if (parent->_get_unmapped_area) - slave->mtd._get_unmapped_area = part_get_unmapped_area; if (parent->_read_oob) slave->mtd._read_oob = part_read_oob; if (parent->_write_oob) diff --git a/drivers/mtd/mtdswap.c b/drivers/mtd/mtdswap.c index 7d9080e33865..f07492c6f4b2 100644 --- a/drivers/mtd/mtdswap.c +++ b/drivers/mtd/mtdswap.c @@ -50,7 +50,7 @@ * Number of free eraseblocks below which GC can also collect low frag * blocks. */ -#define LOW_FRAG_GC_TRESHOLD 5 +#define LOW_FRAG_GC_THRESHOLD 5 /* * Wear level cost amortization. We want to do wear leveling on the background @@ -805,7 +805,7 @@ static int __mtdswap_choose_gc_tree(struct mtdswap_dev *d) { int idx, stopat; - if (TREE_COUNT(d, CLEAN) < LOW_FRAG_GC_TRESHOLD) + if (TREE_COUNT(d, CLEAN) < LOW_FRAG_GC_THRESHOLD) stopat = MTDSWAP_LOWFRAG; else stopat = MTDSWAP_HIFRAG; diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 3f2036f31da4..bb48aafed9a2 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -317,8 +317,11 @@ config MTD_NAND_PXA3xx tristate "NAND support on PXA3xx and Armada 370/XP" depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU help + This enables the driver for the NAND flash device found on - PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2). + PXA3xx processors (NFCv1) and also on 32-bit Armada + platforms (XP, 370, 375, 38x, 39x) and 64-bit Armada + platforms (7K, 8K) (NFCv2). config MTD_NAND_SLC_LPC32XX tristate "NXP LPC32xx SLC Controller" diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 6e2db700d923..118a1349aad3 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -59,7 +59,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/ obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o -obj-$(CONFIG_MTD_NAND_MTK) += mtk_nand.o mtk_ecc.o +obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o nand-objs += nand_amd.o diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index dcec9cf4983f..d60ada45c549 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -41,7 +41,7 @@ static struct mtd_info *ams_delta_mtd = NULL; * Define partitions for flash devices */ -static struct mtd_partition partition_info[] = { +static const struct mtd_partition partition_info[] = { { .name = "Kernel", .offset = 0, .size = 3 * SZ_1M + SZ_512K }, diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c index f25eca79f4e5..90a71a56bc23 100644 --- a/drivers/mtd/nand/atmel/nand-controller.c +++ b/drivers/mtd/nand/atmel/nand-controller.c @@ -718,8 +718,7 @@ static void atmel_nfc_set_op_addr(struct nand_chip *chip, int page, int column) nc->op.addrs[nc->op.naddrs++] = page; nc->op.addrs[nc->op.naddrs++] = page >> 8; - if ((mtd->writesize > 512 && chip->chipsize > SZ_128M) || - (mtd->writesize <= 512 && chip->chipsize > SZ_32M)) + if (chip->options & NAND_ROW_ADDR_3) nc->op.addrs[nc->op.naddrs++] = page >> 16; } } @@ -2530,6 +2529,9 @@ static __maybe_unused int atmel_nand_controller_resume(struct device *dev) struct atmel_nand_controller *nc = dev_get_drvdata(dev); struct atmel_nand *nand; + if (nc->pmecc) + atmel_pmecc_reset(nc->pmecc); + list_for_each_entry(nand, &nc->chips, node) { int i; @@ -2547,6 +2549,7 @@ static struct platform_driver atmel_nand_controller_driver = { .driver = { .name = "atmel-nand-controller", .of_match_table = of_match_ptr(atmel_nand_controller_of_ids), + .pm = &atmel_nand_controller_pm_ops, }, .probe = atmel_nand_controller_probe, .remove = atmel_nand_controller_remove, diff --git a/drivers/mtd/nand/atmel/pmecc.c b/drivers/mtd/nand/atmel/pmecc.c index 8268636675ef..fcbe4fd6e684 100644 --- a/drivers/mtd/nand/atmel/pmecc.c +++ b/drivers/mtd/nand/atmel/pmecc.c @@ -765,6 +765,13 @@ void atmel_pmecc_get_generated_eccbytes(struct atmel_pmecc_user *user, } EXPORT_SYMBOL_GPL(atmel_pmecc_get_generated_eccbytes); +void atmel_pmecc_reset(struct atmel_pmecc *pmecc) +{ + writel(PMECC_CTRL_RST, pmecc->regs.base + ATMEL_PMECC_CTRL); + writel(PMECC_CTRL_DISABLE, pmecc->regs.base + ATMEL_PMECC_CTRL); +} +EXPORT_SYMBOL_GPL(atmel_pmecc_reset); + int atmel_pmecc_enable(struct atmel_pmecc_user *user, int op) { struct atmel_pmecc *pmecc = user->pmecc; @@ -797,10 +804,7 @@ EXPORT_SYMBOL_GPL(atmel_pmecc_enable); void atmel_pmecc_disable(struct atmel_pmecc_user *user) { - struct atmel_pmecc *pmecc = user->pmecc; - - writel(PMECC_CTRL_RST, pmecc->regs.base + ATMEL_PMECC_CTRL); - writel(PMECC_CTRL_DISABLE, pmecc->regs.base + ATMEL_PMECC_CTRL); + atmel_pmecc_reset(user->pmecc); mutex_unlock(&user->pmecc->lock); } EXPORT_SYMBOL_GPL(atmel_pmecc_disable); @@ -855,10 +859,7 @@ static struct atmel_pmecc *atmel_pmecc_create(struct platform_device *pdev, /* Disable all interrupts before registering the PMECC handler. */ writel(0xffffffff, pmecc->regs.base + ATMEL_PMECC_IDR); - - /* Reset the ECC engine */ - writel(PMECC_CTRL_RST, pmecc->regs.base + ATMEL_PMECC_CTRL); - writel(PMECC_CTRL_DISABLE, pmecc->regs.base + ATMEL_PMECC_CTRL); + atmel_pmecc_reset(pmecc); return pmecc; } diff --git a/drivers/mtd/nand/atmel/pmecc.h b/drivers/mtd/nand/atmel/pmecc.h index a8ddbfca2ea5..817e0dd9fd15 100644 --- a/drivers/mtd/nand/atmel/pmecc.h +++ b/drivers/mtd/nand/atmel/pmecc.h @@ -61,6 +61,7 @@ atmel_pmecc_create_user(struct atmel_pmecc *pmecc, struct atmel_pmecc_user_req *req); void atmel_pmecc_destroy_user(struct atmel_pmecc_user *user); +void atmel_pmecc_reset(struct atmel_pmecc *pmecc); int atmel_pmecc_enable(struct atmel_pmecc_user *user, int op); void atmel_pmecc_disable(struct atmel_pmecc_user *user); int atmel_pmecc_wait_rdy(struct atmel_pmecc_user *user); diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 9d4a28fa6b73..8ab827edf94e 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -331,8 +331,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i ctx->write_byte(mtd, (u8)(page_addr >> 8)); - /* One more address cycle for devices > 32MiB */ - if (this->chipsize > (32 << 20)) + if (this->options & NAND_ROW_ADDR_3) ctx->write_byte(mtd, ((page_addr >> 16) & 0x0f)); } diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index 1fc435f994e1..b01c9804590e 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c @@ -42,7 +42,7 @@ static void __iomem *cmx270_nand_io; /* * Define static partitions for flash device */ -static struct mtd_partition partition_info[] = { +static const struct mtd_partition partition_info[] = { [0] = { .name = "cmx270-0", .offset = 0, diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 3087b0ba7b7f..5124f8ae8c04 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -10,20 +10,18 @@ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ -#include <linux/interrupt.h> -#include <linux/delay.h> + +#include <linux/bitfield.h> +#include <linux/completion.h> #include <linux/dma-mapping.h> -#include <linux/wait.h> -#include <linux/mutex.h> -#include <linux/mtd/mtd.h> +#include <linux/interrupt.h> +#include <linux/io.h> #include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/rawnand.h> #include <linux/slab.h> +#include <linux/spinlock.h> #include "denali.h" @@ -31,9 +29,9 @@ MODULE_LICENSE("GPL"); #define DENALI_NAND_NAME "denali-nand" -/* Host Data/Command Interface */ -#define DENALI_HOST_ADDR 0x00 -#define DENALI_HOST_DATA 0x10 +/* for Indexed Addressing */ +#define DENALI_INDEXED_CTRL 0x00 +#define DENALI_INDEXED_DATA 0x10 #define DENALI_MAP00 (0 << 26) /* direct access to buffer */ #define DENALI_MAP01 (1 << 26) /* read/write pages in PIO */ @@ -61,31 +59,55 @@ MODULE_LICENSE("GPL"); */ #define DENALI_CLK_X_MULT 6 -/* - * this macro allows us to convert from an MTD structure to our own - * device context (denali) structure. - */ static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd) { return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand); } -static void denali_host_write(struct denali_nand_info *denali, - uint32_t addr, uint32_t data) +/* + * Direct Addressing - the slave address forms the control information (command + * type, bank, block, and page address). The slave data is the actual data to + * be transferred. This mode requires 28 bits of address region allocated. + */ +static u32 denali_direct_read(struct denali_nand_info *denali, u32 addr) +{ + return ioread32(denali->host + addr); +} + +static void denali_direct_write(struct denali_nand_info *denali, u32 addr, + u32 data) { - iowrite32(addr, denali->host + DENALI_HOST_ADDR); - iowrite32(data, denali->host + DENALI_HOST_DATA); + iowrite32(data, denali->host + addr); +} + +/* + * Indexed Addressing - address translation module intervenes in passing the + * control information. This mode reduces the required address range. The + * control information and transferred data are latched by the registers in + * the translation module. + */ +static u32 denali_indexed_read(struct denali_nand_info *denali, u32 addr) +{ + iowrite32(addr, denali->host + DENALI_INDEXED_CTRL); + return ioread32(denali->host + DENALI_INDEXED_DATA); +} + +static void denali_indexed_write(struct denali_nand_info *denali, u32 addr, + u32 data) +{ + iowrite32(addr, denali->host + DENALI_INDEXED_CTRL); + iowrite32(data, denali->host + DENALI_INDEXED_DATA); } /* * Use the configuration feature register to determine the maximum number of * banks that the hardware supports. */ -static void detect_max_banks(struct denali_nand_info *denali) +static void denali_detect_max_banks(struct denali_nand_info *denali) { uint32_t features = ioread32(denali->reg + FEATURES); - denali->max_banks = 1 << (features & FEATURES__N_BANKS); + denali->max_banks = 1 << FIELD_GET(FEATURES__N_BANKS, features); /* the encoding changed from rev 5.0 to 5.1 */ if (denali->revision < 0x0501) @@ -189,7 +211,7 @@ static uint32_t denali_wait_for_irq(struct denali_nand_info *denali, msecs_to_jiffies(1000)); if (!time_left) { dev_err(denali->dev, "timeout while waiting for irq 0x%x\n", - denali->irq_mask); + irq_mask); return 0; } @@ -208,73 +230,47 @@ static uint32_t denali_check_irq(struct denali_nand_info *denali) return irq_status; } -/* - * This helper function setups the registers for ECC and whether or not - * the spare area will be transferred. - */ -static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, - bool transfer_spare) -{ - int ecc_en_flag, transfer_spare_flag; - - /* set ECC, transfer spare bits if needed */ - ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0; - transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0; - - /* Enable spare area/ECC per user's request. */ - iowrite32(ecc_en_flag, denali->reg + ECC_ENABLE); - iowrite32(transfer_spare_flag, denali->reg + TRANSFER_SPARE_REG); -} - static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { struct denali_nand_info *denali = mtd_to_denali(mtd); + u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali); int i; - iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), - denali->host + DENALI_HOST_ADDR); - for (i = 0; i < len; i++) - buf[i] = ioread32(denali->host + DENALI_HOST_DATA); + buf[i] = denali->host_read(denali, addr); } static void denali_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { struct denali_nand_info *denali = mtd_to_denali(mtd); + u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali); int i; - iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), - denali->host + DENALI_HOST_ADDR); - for (i = 0; i < len; i++) - iowrite32(buf[i], denali->host + DENALI_HOST_DATA); + denali->host_write(denali, addr, buf[i]); } static void denali_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) { struct denali_nand_info *denali = mtd_to_denali(mtd); + u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali); uint16_t *buf16 = (uint16_t *)buf; int i; - iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), - denali->host + DENALI_HOST_ADDR); - for (i = 0; i < len / 2; i++) - buf16[i] = ioread32(denali->host + DENALI_HOST_DATA); + buf16[i] = denali->host_read(denali, addr); } static void denali_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) { struct denali_nand_info *denali = mtd_to_denali(mtd); + u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali); const uint16_t *buf16 = (const uint16_t *)buf; int i; - iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), - denali->host + DENALI_HOST_ADDR); - for (i = 0; i < len / 2; i++) - iowrite32(buf16[i], denali->host + DENALI_HOST_DATA); + denali->host_write(denali, addr, buf16[i]); } static uint8_t denali_read_byte(struct mtd_info *mtd) @@ -319,7 +315,7 @@ static void denali_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl) if (ctrl & NAND_CTRL_CHANGE) denali_reset_irq(denali); - denali_host_write(denali, DENALI_BANK(denali) | type, dat); + denali->host_write(denali, DENALI_BANK(denali) | type, dat); } static int denali_dev_ready(struct mtd_info *mtd) @@ -389,7 +385,7 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd, return 0; } - max_bitflips = ecc_cor & ECC_COR_INFO__MAX_ERRORS; + max_bitflips = FIELD_GET(ECC_COR_INFO__MAX_ERRORS, ecc_cor); /* * The register holds the maximum of per-sector corrected bitflips. @@ -402,13 +398,6 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd, return max_bitflips; } -#define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12) -#define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET)) -#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK) -#define ECC_ERROR_UNCORRECTABLE(x) ((x) & ERR_CORRECTION_INFO__ERROR_TYPE) -#define ECC_ERR_DEVICE(x) (((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8) -#define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO) - static int denali_sw_ecc_fixup(struct mtd_info *mtd, struct denali_nand_info *denali, unsigned long *uncor_ecc_flags, uint8_t *buf) @@ -426,18 +415,20 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, do { err_addr = ioread32(denali->reg + ECC_ERROR_ADDRESS); - err_sector = ECC_SECTOR(err_addr); - err_byte = ECC_BYTE(err_addr); + err_sector = FIELD_GET(ECC_ERROR_ADDRESS__SECTOR, err_addr); + err_byte = FIELD_GET(ECC_ERROR_ADDRESS__OFFSET, err_addr); err_cor_info = ioread32(denali->reg + ERR_CORRECTION_INFO); - err_cor_value = ECC_CORRECTION_VALUE(err_cor_info); - err_device = ECC_ERR_DEVICE(err_cor_info); + err_cor_value = FIELD_GET(ERR_CORRECTION_INFO__BYTE, + err_cor_info); + err_device = FIELD_GET(ERR_CORRECTION_INFO__DEVICE, + err_cor_info); /* reset the bitflip counter when crossing ECC sector */ if (err_sector != prev_sector) bitflips = 0; - if (ECC_ERROR_UNCORRECTABLE(err_cor_info)) { + if (err_cor_info & ERR_CORRECTION_INFO__UNCOR) { /* * Check later if this is a real ECC error, or * an erased sector. @@ -467,12 +458,11 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, } prev_sector = err_sector; - } while (!ECC_LAST_ERR(err_cor_info)); + } while (!(err_cor_info & ERR_CORRECTION_INFO__LAST_ERR)); /* - * Once handle all ecc errors, controller will trigger a - * ECC_TRANSACTION_DONE interrupt, so here just wait for - * a while for this interrupt + * Once handle all ECC errors, controller will trigger an + * ECC_TRANSACTION_DONE interrupt. */ irq_status = denali_wait_for_irq(denali, INTR__ECC_TRANSACTION_DONE); if (!(irq_status & INTR__ECC_TRANSACTION_DONE)) @@ -481,13 +471,6 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, return max_bitflips; } -/* programs the controller to either enable/disable DMA transfers */ -static void denali_enable_dma(struct denali_nand_info *denali, bool en) -{ - iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->reg + DMA_ENABLE); - ioread32(denali->reg + DMA_ENABLE); -} - static void denali_setup_dma64(struct denali_nand_info *denali, dma_addr_t dma_addr, int page, int write) { @@ -502,14 +485,14 @@ static void denali_setup_dma64(struct denali_nand_info *denali, * 1. setup transfer type, interrupt when complete, * burst len = 64 bytes, the number of pages */ - denali_host_write(denali, mode, - 0x01002000 | (64 << 16) | (write << 8) | page_count); + denali->host_write(denali, mode, + 0x01002000 | (64 << 16) | (write << 8) | page_count); /* 2. set memory low address */ - denali_host_write(denali, mode, dma_addr); + denali->host_write(denali, mode, lower_32_bits(dma_addr)); /* 3. set memory high address */ - denali_host_write(denali, mode, (uint64_t)dma_addr >> 32); + denali->host_write(denali, mode, upper_32_bits(dma_addr)); } static void denali_setup_dma32(struct denali_nand_info *denali, @@ -523,32 +506,23 @@ static void denali_setup_dma32(struct denali_nand_info *denali, /* DMA is a four step process */ /* 1. setup transfer type and # of pages */ - denali_host_write(denali, mode | page, - 0x2000 | (write << 8) | page_count); + denali->host_write(denali, mode | page, + 0x2000 | (write << 8) | page_count); /* 2. set memory high address bits 23:8 */ - denali_host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200); + denali->host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200); /* 3. set memory low address bits 23:8 */ - denali_host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300); + denali->host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300); /* 4. interrupt when complete, burst len = 64 bytes */ - denali_host_write(denali, mode | 0x14000, 0x2400); -} - -static void denali_setup_dma(struct denali_nand_info *denali, - dma_addr_t dma_addr, int page, int write) -{ - if (denali->caps & DENALI_CAP_DMA_64BIT) - denali_setup_dma64(denali, dma_addr, page, write); - else - denali_setup_dma32(denali, dma_addr, page, write); + denali->host_write(denali, mode | 0x14000, 0x2400); } static int denali_pio_read(struct denali_nand_info *denali, void *buf, size_t size, int page, int raw) { - uint32_t addr = DENALI_BANK(denali) | page; + u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page; uint32_t *buf32 = (uint32_t *)buf; uint32_t irq_status, ecc_err_mask; int i; @@ -560,9 +534,8 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf, denali_reset_irq(denali); - iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR); for (i = 0; i < size / 4; i++) - *buf32++ = ioread32(denali->host + DENALI_HOST_DATA); + *buf32++ = denali->host_read(denali, addr); irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC); if (!(irq_status & INTR__PAGE_XFER_INC)) @@ -577,16 +550,15 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf, static int denali_pio_write(struct denali_nand_info *denali, const void *buf, size_t size, int page, int raw) { - uint32_t addr = DENALI_BANK(denali) | page; + u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page; const uint32_t *buf32 = (uint32_t *)buf; uint32_t irq_status; int i; denali_reset_irq(denali); - iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR); for (i = 0; i < size / 4; i++) - iowrite32(*buf32++, denali->host + DENALI_HOST_DATA); + denali->host_write(denali, addr, *buf32++); irq_status = denali_wait_for_irq(denali, INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL); @@ -635,19 +607,19 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, ecc_err_mask = INTR__ECC_ERR; } - denali_enable_dma(denali, true); + iowrite32(DMA_ENABLE__FLAG, denali->reg + DMA_ENABLE); denali_reset_irq(denali); - denali_setup_dma(denali, dma_addr, page, write); + denali->setup_dma(denali, dma_addr, page, write); - /* wait for operation to complete */ irq_status = denali_wait_for_irq(denali, irq_mask); if (!(irq_status & INTR__DMA_CMD_COMP)) ret = -EIO; else if (irq_status & ecc_err_mask) ret = -EBADMSG; - denali_enable_dma(denali, false); + iowrite32(0, denali->reg + DMA_ENABLE); + dma_unmap_single(denali->dev, dma_addr, size, dir); if (irq_status & INTR__ERASED_PAGE) @@ -659,7 +631,9 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, static int denali_data_xfer(struct denali_nand_info *denali, void *buf, size_t size, int page, int raw, int write) { - setup_ecc_for_xfer(denali, !raw, raw); + iowrite32(raw ? 0 : ECC_ENABLE__FLAG, denali->reg + ECC_ENABLE); + iowrite32(raw ? TRANSFER_SPARE_REG__FLAG : 0, + denali->reg + TRANSFER_SPARE_REG); if (denali->dma_avail) return denali_dma_xfer(denali, buf, size, page, raw, write); @@ -970,8 +944,8 @@ static int denali_erase(struct mtd_info *mtd, int page) denali_reset_irq(denali); - denali_host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page, - DENALI_ERASE); + denali->host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page, + DENALI_ERASE); /* wait for erase to complete or failure to occur */ irq_status = denali_wait_for_irq(denali, @@ -1009,7 +983,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + ACC_CLKS); tmp &= ~ACC_CLKS__VALUE; - tmp |= acc_clks; + tmp |= FIELD_PREP(ACC_CLKS__VALUE, acc_clks); iowrite32(tmp, denali->reg + ACC_CLKS); /* tRWH -> RE_2_WE */ @@ -1018,7 +992,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + RE_2_WE); tmp &= ~RE_2_WE__VALUE; - tmp |= re_2_we; + tmp |= FIELD_PREP(RE_2_WE__VALUE, re_2_we); iowrite32(tmp, denali->reg + RE_2_WE); /* tRHZ -> RE_2_RE */ @@ -1027,16 +1001,22 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + RE_2_RE); tmp &= ~RE_2_RE__VALUE; - tmp |= re_2_re; + tmp |= FIELD_PREP(RE_2_RE__VALUE, re_2_re); iowrite32(tmp, denali->reg + RE_2_RE); - /* tWHR -> WE_2_RE */ - we_2_re = DIV_ROUND_UP(timings->tWHR_min, t_clk); + /* + * tCCS, tWHR -> WE_2_RE + * + * With WE_2_RE properly set, the Denali controller automatically takes + * care of the delay; the driver need not set NAND_WAIT_TCCS. + */ + we_2_re = DIV_ROUND_UP(max(timings->tCCS_min, timings->tWHR_min), + t_clk); we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE); tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE); tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE; - tmp |= we_2_re; + tmp |= FIELD_PREP(TWHR2_AND_WE_2_RE__WE_2_RE, we_2_re); iowrite32(tmp, denali->reg + TWHR2_AND_WE_2_RE); /* tADL -> ADDR_2_DATA */ @@ -1050,8 +1030,8 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, addr_2_data = min_t(int, addr_2_data, addr_2_data_mask); tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA); - tmp &= ~addr_2_data_mask; - tmp |= addr_2_data; + tmp &= ~TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA; + tmp |= FIELD_PREP(TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA, addr_2_data); iowrite32(tmp, denali->reg + TCWAW_AND_ADDR_2_DATA); /* tREH, tWH -> RDWR_EN_HI_CNT */ @@ -1061,7 +1041,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + RDWR_EN_HI_CNT); tmp &= ~RDWR_EN_HI_CNT__VALUE; - tmp |= rdwr_en_hi; + tmp |= FIELD_PREP(RDWR_EN_HI_CNT__VALUE, rdwr_en_hi); iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT); /* tRP, tWP -> RDWR_EN_LO_CNT */ @@ -1075,7 +1055,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + RDWR_EN_LO_CNT); tmp &= ~RDWR_EN_LO_CNT__VALUE; - tmp |= rdwr_en_lo; + tmp |= FIELD_PREP(RDWR_EN_LO_CNT__VALUE, rdwr_en_lo); iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT); /* tCS, tCEA -> CS_SETUP_CNT */ @@ -1086,7 +1066,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, tmp = ioread32(denali->reg + CS_SETUP_CNT); tmp &= ~CS_SETUP_CNT__VALUE; - tmp |= cs_setup; + tmp |= FIELD_PREP(CS_SETUP_CNT__VALUE, cs_setup); iowrite32(tmp, denali->reg + CS_SETUP_CNT); return 0; @@ -1131,15 +1111,11 @@ static void denali_hw_init(struct denali_nand_info *denali) * if this value is 0, just let it be. */ denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES); - detect_max_banks(denali); + denali_detect_max_banks(denali); iowrite32(0x0F, denali->reg + RB_PIN_ENABLED); iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE); iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER); - - /* Should set value for these registers when init */ - iowrite32(0, denali->reg + TWO_ROW_ADDR_CYCLES); - iowrite32(1, denali->reg + ECC_ENABLE); } int denali_calc_ecc_bytes(int step_size, int strength) @@ -1211,22 +1187,6 @@ static const struct mtd_ooblayout_ops denali_ooblayout_ops = { .free = denali_ooblayout_free, }; -/* initialize driver data structures */ -static void denali_drv_init(struct denali_nand_info *denali) -{ - /* - * the completion object will be used to notify - * the callee that the interrupt is done - */ - init_completion(&denali->complete); - - /* - * the spinlock will be used to synchronize the ISR with any - * element that might be access shared data (interrupt status) - */ - spin_lock_init(&denali->irq_lock); -} - static int denali_multidev_fixup(struct denali_nand_info *denali) { struct nand_chip *chip = &denali->nand; @@ -1282,15 +1242,17 @@ int denali_init(struct denali_nand_info *denali) { struct nand_chip *chip = &denali->nand; struct mtd_info *mtd = nand_to_mtd(chip); + u32 features = ioread32(denali->reg + FEATURES); int ret; mtd->dev.parent = denali->dev; denali_hw_init(denali); - denali_drv_init(denali); + + init_completion(&denali->complete); + spin_lock_init(&denali->irq_lock); denali_clear_irq_all(denali); - /* Request IRQ after all the hardware initialization is finished */ ret = devm_request_irq(denali->dev, denali->irq, denali_isr, IRQF_SHARED, DENALI_NAND_NAME, denali); if (ret) { @@ -1308,7 +1270,6 @@ int denali_init(struct denali_nand_info *denali) if (!mtd->name) mtd->name = "denali-nand"; - /* register the driver with the NAND core subsystem */ chip->select_chip = denali_select_chip; chip->read_byte = denali_read_byte; chip->write_byte = denali_write_byte; @@ -1317,15 +1278,18 @@ int denali_init(struct denali_nand_info *denali) chip->dev_ready = denali_dev_ready; chip->waitfunc = denali_waitfunc; + if (features & FEATURES__INDEX_ADDR) { + denali->host_read = denali_indexed_read; + denali->host_write = denali_indexed_write; + } else { + denali->host_read = denali_direct_read; + denali->host_write = denali_direct_write; + } + /* clk rate info is needed for setup_data_interface */ if (denali->clk_x_rate) chip->setup_data_interface = denali_setup_data_interface; - /* - * scan for NAND devices attached to the controller - * this is the first stage in a two step process to register - * with the nand subsystem - */ ret = nand_scan_ident(mtd, denali->max_banks, NULL); if (ret) goto disable_irq; @@ -1347,20 +1311,15 @@ int denali_init(struct denali_nand_info *denali) if (denali->dma_avail) { chip->options |= NAND_USE_BOUNCE_BUFFER; chip->buf_align = 16; + if (denali->caps & DENALI_CAP_DMA_64BIT) + denali->setup_dma = denali_setup_dma64; + else + denali->setup_dma = denali_setup_dma32; } - /* - * second stage of the NAND scan - * this stage requires information regarding ECC and - * bad block management. - */ - chip->bbt_options |= NAND_BBT_USE_FLASH; chip->bbt_options |= NAND_BBT_NO_OOB; - chip->ecc.mode = NAND_ECC_HW_SYNDROME; - - /* no subpage writes on denali */ chip->options |= NAND_NO_SUBPAGE_WRITE; ret = denali_ecc_setup(mtd, chip, denali); @@ -1373,12 +1332,15 @@ int denali_init(struct denali_nand_info *denali) "chosen ECC settings: step=%d, strength=%d, bytes=%d\n", chip->ecc.size, chip->ecc.strength, chip->ecc.bytes); - iowrite32(MAKE_ECC_CORRECTION(chip->ecc.strength, 1), + iowrite32(FIELD_PREP(ECC_CORRECTION__ERASE_THRESHOLD, 1) | + FIELD_PREP(ECC_CORRECTION__VALUE, chip->ecc.strength), denali->reg + ECC_CORRECTION); iowrite32(mtd->erasesize / mtd->writesize, denali->reg + PAGES_PER_BLOCK); iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0, denali->reg + DEVICE_WIDTH); + iowrite32(chip->options & NAND_ROW_ADDR_3 ? 0 : TWO_ROW_ADDR_CYCLES__FLAG, + denali->reg + TWO_ROW_ADDR_CYCLES); iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE); iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE); @@ -1441,7 +1403,6 @@ disable_irq: } EXPORT_SYMBOL(denali_init); -/* driver exit point */ void denali_remove(struct denali_nand_info *denali) { struct mtd_info *mtd = nand_to_mtd(&denali->nand); diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 9239e6793e6e..2911066dacac 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -10,18 +10,16 @@ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ #ifndef __DENALI_H__ #define __DENALI_H__ #include <linux/bitops.h> +#include <linux/completion.h> #include <linux/mtd/rawnand.h> +#include <linux/spinlock_types.h> +#include <linux/types.h> #define DEVICE_RESET 0x0 #define DEVICE_RESET__BANK(bank) BIT(bank) @@ -111,9 +109,6 @@ #define ECC_CORRECTION 0x1b0 #define ECC_CORRECTION__VALUE GENMASK(4, 0) #define ECC_CORRECTION__ERASE_THRESHOLD GENMASK(31, 16) -#define MAKE_ECC_CORRECTION(val, thresh) \ - (((val) & (ECC_CORRECTION__VALUE)) | \ - (((thresh) << 16) & (ECC_CORRECTION__ERASE_THRESHOLD))) #define READ_MODE 0x1c0 #define READ_MODE__VALUE GENMASK(3, 0) @@ -255,13 +250,13 @@ #define ECC_ERROR_ADDRESS 0x630 #define ECC_ERROR_ADDRESS__OFFSET GENMASK(11, 0) -#define ECC_ERROR_ADDRESS__SECTOR_NR GENMASK(15, 12) +#define ECC_ERROR_ADDRESS__SECTOR GENMASK(15, 12) #define ERR_CORRECTION_INFO 0x640 -#define ERR_CORRECTION_INFO__BYTEMASK GENMASK(7, 0) -#define ERR_CORRECTION_INFO__DEVICE_NR GENMASK(11, 8) -#define ERR_CORRECTION_INFO__ERROR_TYPE BIT(14) -#define ERR_CORRECTION_INFO__LAST_ERR_INFO BIT(15) +#define ERR_CORRECTION_INFO__BYTE GENMASK(7, 0) +#define ERR_CORRECTION_INFO__DEVICE GENMASK(11, 8) +#define ERR_CORRECTION_INFO__UNCOR BIT(14) +#define ERR_CORRECTION_INFO__LAST_ERR BIT(15) #define ECC_COR_INFO(bank) (0x650 + (bank) / 2 * 0x10) #define ECC_COR_INFO__SHIFT(bank) ((bank) % 2 * 8) @@ -310,23 +305,24 @@ struct denali_nand_info { struct device *dev; void __iomem *reg; /* Register Interface */ void __iomem *host; /* Host Data/Command Interface */ - - /* elements used by ISR */ struct completion complete; - spinlock_t irq_lock; - uint32_t irq_mask; - uint32_t irq_status; + spinlock_t irq_lock; /* protect irq_mask and irq_status */ + u32 irq_mask; /* interrupts we are waiting for */ + u32 irq_status; /* interrupts that have happened */ int irq; - - void *buf; + void *buf; /* for syndrome layout conversion */ dma_addr_t dma_addr; - int dma_avail; + int dma_avail; /* can support DMA? */ int devs_per_cs; /* devices connected in parallel */ - int oob_skip_bytes; + int oob_skip_bytes; /* number of bytes reserved for BBM */ int max_banks; - unsigned int revision; - unsigned int caps; + unsigned int revision; /* IP revision */ + unsigned int caps; /* IP capability (or quirk) */ const struct nand_ecc_caps *ecc_caps; + u32 (*host_read)(struct denali_nand_info *denali, u32 addr); + void (*host_write)(struct denali_nand_info *denali, u32 addr, u32 data); + void (*setup_dma)(struct denali_nand_info *denali, dma_addr_t dma_addr, + int page, int write); }; #define DENALI_CAP_HW_ECC_FIXUP BIT(0) diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c index 56e2e177644d..cfd33e6ca77f 100644 --- a/drivers/mtd/nand/denali_dt.c +++ b/drivers/mtd/nand/denali_dt.c @@ -12,15 +12,16 @@ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. */ + #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> #include <linux/ioport.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/platform_device.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/platform_device.h> #include "denali.h" @@ -155,7 +156,6 @@ static struct platform_driver denali_dt_driver = { .of_match_table = denali_nand_dt_ids, }, }; - module_platform_driver(denali_dt_driver); MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c index 81370c79aa48..57fb7ae31412 100644 --- a/drivers/mtd/nand/denali_pci.c +++ b/drivers/mtd/nand/denali_pci.c @@ -11,6 +11,9 @@ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. */ + +#include <linux/errno.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> @@ -106,7 +109,6 @@ failed_remap_reg: return ret; } -/* driver exit point */ static void denali_pci_remove(struct pci_dev *dev) { struct denali_nand_info *denali = pci_get_drvdata(dev); @@ -122,5 +124,4 @@ static struct pci_driver denali_pci_driver = { .probe = denali_pci_probe, .remove = denali_pci_remove, }; - module_pci_driver(denali_pci_driver); diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index c3aa53caab5c..72671dc52e2e 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -705,8 +705,7 @@ static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int colu if (page_addr != -1) { WriteDOC((unsigned char)(page_addr & 0xff), docptr, Mplus_FlashAddress); WriteDOC((unsigned char)((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress); - /* One more address cycle for higher density devices */ - if (this->chipsize & 0x0c000000) { + if (this->options & NAND_ROW_ADDR_3) { WriteDOC((unsigned char)((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress); printk("high density\n"); } diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c index fd3648952b5a..484f7fbc3f7d 100644 --- a/drivers/mtd/nand/gpio.c +++ b/drivers/mtd/nand/gpio.c @@ -23,7 +23,7 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> @@ -31,12 +31,16 @@ #include <linux/mtd/nand-gpio.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/of_gpio.h> struct gpiomtd { void __iomem *io_sync; struct nand_chip nand_chip; struct gpio_nand_platdata plat; + struct gpio_desc *nce; /* Optional chip enable */ + struct gpio_desc *cle; + struct gpio_desc *ale; + struct gpio_desc *rdy; + struct gpio_desc *nwp; /* Optional write protection */ }; static inline struct gpiomtd *gpio_nand_getpriv(struct mtd_info *mtd) @@ -78,11 +82,10 @@ static void gpio_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) gpio_nand_dosync(gpiomtd); if (ctrl & NAND_CTRL_CHANGE) { - if (gpio_is_valid(gpiomtd->plat.gpio_nce)) - gpio_set_value(gpiomtd->plat.gpio_nce, - !(ctrl & NAND_NCE)); - gpio_set_value(gpiomtd->plat.gpio_cle, !!(ctrl & NAND_CLE)); - gpio_set_value(gpiomtd->plat.gpio_ale, !!(ctrl & NAND_ALE)); + if (gpiomtd->nce) + gpiod_set_value(gpiomtd->nce, !(ctrl & NAND_NCE)); + gpiod_set_value(gpiomtd->cle, !!(ctrl & NAND_CLE)); + gpiod_set_value(gpiomtd->ale, !!(ctrl & NAND_ALE)); gpio_nand_dosync(gpiomtd); } if (cmd == NAND_CMD_NONE) @@ -96,7 +99,7 @@ static int gpio_nand_devready(struct mtd_info *mtd) { struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd); - return gpio_get_value(gpiomtd->plat.gpio_rdy); + return gpiod_get_value(gpiomtd->rdy); } #ifdef CONFIG_OF @@ -123,12 +126,6 @@ static int gpio_nand_get_config_of(const struct device *dev, } } - plat->gpio_rdy = of_get_gpio(dev->of_node, 0); - plat->gpio_nce = of_get_gpio(dev->of_node, 1); - plat->gpio_ale = of_get_gpio(dev->of_node, 2); - plat->gpio_cle = of_get_gpio(dev->of_node, 3); - plat->gpio_nwp = of_get_gpio(dev->of_node, 4); - if (!of_property_read_u32(dev->of_node, "chip-delay", &val)) plat->chip_delay = val; @@ -201,10 +198,11 @@ static int gpio_nand_remove(struct platform_device *pdev) nand_release(nand_to_mtd(&gpiomtd->nand_chip)); - if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) - gpio_set_value(gpiomtd->plat.gpio_nwp, 0); - if (gpio_is_valid(gpiomtd->plat.gpio_nce)) - gpio_set_value(gpiomtd->plat.gpio_nce, 1); + /* Enable write protection and disable the chip */ + if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp)) + gpiod_set_value(gpiomtd->nwp, 0); + if (gpiomtd->nce && !IS_ERR(gpiomtd->nce)) + gpiod_set_value(gpiomtd->nce, 0); return 0; } @@ -215,66 +213,66 @@ static int gpio_nand_probe(struct platform_device *pdev) struct nand_chip *chip; struct mtd_info *mtd; struct resource *res; + struct device *dev = &pdev->dev; int ret = 0; - if (!pdev->dev.of_node && !dev_get_platdata(&pdev->dev)) + if (!dev->of_node && !dev_get_platdata(dev)) return -EINVAL; - gpiomtd = devm_kzalloc(&pdev->dev, sizeof(*gpiomtd), GFP_KERNEL); + gpiomtd = devm_kzalloc(dev, sizeof(*gpiomtd), GFP_KERNEL); if (!gpiomtd) return -ENOMEM; chip = &gpiomtd->nand_chip; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res); + chip->IO_ADDR_R = devm_ioremap_resource(dev, res); if (IS_ERR(chip->IO_ADDR_R)) return PTR_ERR(chip->IO_ADDR_R); res = gpio_nand_get_io_sync(pdev); if (res) { - gpiomtd->io_sync = devm_ioremap_resource(&pdev->dev, res); + gpiomtd->io_sync = devm_ioremap_resource(dev, res); if (IS_ERR(gpiomtd->io_sync)) return PTR_ERR(gpiomtd->io_sync); } - ret = gpio_nand_get_config(&pdev->dev, &gpiomtd->plat); + ret = gpio_nand_get_config(dev, &gpiomtd->plat); if (ret) return ret; - if (gpio_is_valid(gpiomtd->plat.gpio_nce)) { - ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nce, - "NAND NCE"); - if (ret) - return ret; - gpio_direction_output(gpiomtd->plat.gpio_nce, 1); + /* Just enable the chip */ + gpiomtd->nce = devm_gpiod_get_optional(dev, "nce", GPIOD_OUT_HIGH); + if (IS_ERR(gpiomtd->nce)) + return PTR_ERR(gpiomtd->nce); + + /* We disable write protection once we know probe() will succeed */ + gpiomtd->nwp = devm_gpiod_get_optional(dev, "nwp", GPIOD_OUT_LOW); + if (IS_ERR(gpiomtd->nwp)) { + ret = PTR_ERR(gpiomtd->nwp); + goto out_ce; } - if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) { - ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nwp, - "NAND NWP"); - if (ret) - return ret; + gpiomtd->nwp = devm_gpiod_get(dev, "ale", GPIOD_OUT_LOW); + if (IS_ERR(gpiomtd->nwp)) { + ret = PTR_ERR(gpiomtd->nwp); + goto out_ce; } - ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_ale, "NAND ALE"); - if (ret) - return ret; - gpio_direction_output(gpiomtd->plat.gpio_ale, 0); + gpiomtd->cle = devm_gpiod_get(dev, "cle", GPIOD_OUT_LOW); + if (IS_ERR(gpiomtd->cle)) { + ret = PTR_ERR(gpiomtd->cle); + goto out_ce; + } - ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_cle, "NAND CLE"); - if (ret) - return ret; - gpio_direction_output(gpiomtd->plat.gpio_cle, 0); - - if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) { - ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_rdy, - "NAND RDY"); - if (ret) - return ret; - gpio_direction_input(gpiomtd->plat.gpio_rdy); - chip->dev_ready = gpio_nand_devready; + gpiomtd->rdy = devm_gpiod_get_optional(dev, "rdy", GPIOD_IN); + if (IS_ERR(gpiomtd->rdy)) { + ret = PTR_ERR(gpiomtd->rdy); + goto out_ce; } + /* Using RDY pin */ + if (gpiomtd->rdy) + chip->dev_ready = gpio_nand_devready; nand_set_flash_node(chip, pdev->dev.of_node); chip->IO_ADDR_W = chip->IO_ADDR_R; @@ -285,12 +283,13 @@ static int gpio_nand_probe(struct platform_device *pdev) chip->cmd_ctrl = gpio_nand_cmd_ctrl; mtd = nand_to_mtd(chip); - mtd->dev.parent = &pdev->dev; + mtd->dev.parent = dev; platform_set_drvdata(pdev, gpiomtd); - if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) - gpio_direction_output(gpiomtd->plat.gpio_nwp, 1); + /* Disable write protection, if wired up */ + if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp)) + gpiod_direction_output(gpiomtd->nwp, 1); ret = nand_scan(mtd, 1); if (ret) @@ -305,8 +304,11 @@ static int gpio_nand_probe(struct platform_device *pdev) return 0; err_wp: - if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) - gpio_set_value(gpiomtd->plat.gpio_nwp, 0); + if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp)) + gpiod_set_value(gpiomtd->nwp, 0); +out_ce: + if (gpiomtd->nce && !IS_ERR(gpiomtd->nce)) + gpiod_set_value(gpiomtd->nce, 0); return ret; } diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c index d9ee1a7e6956..0897261c3e17 100644 --- a/drivers/mtd/nand/hisi504_nand.c +++ b/drivers/mtd/nand/hisi504_nand.c @@ -432,8 +432,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr) host->addr_value[0] |= (page_addr & 0xffff) << (host->addr_cycle * 8); host->addr_cycle += 2; - /* One more address cycle for devices > 128MiB */ - if (chip->chipsize > (128 << 20)) { + if (chip->options & NAND_ROW_ADDR_3) { host->addr_cycle += 1; if (host->command == NAND_CMD_ERASE1) host->addr_value[0] |= ((page_addr >> 16) & 0xff) << 16; diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c index 7f3b065b6b8f..c51d214d169e 100644 --- a/drivers/mtd/nand/mtk_ecc.c +++ b/drivers/mtd/nand/mtk_ecc.c @@ -115,6 +115,11 @@ static irqreturn_t mtk_ecc_irq(int irq, void *id) op = ECC_DECODE; dec = readw(ecc->regs + ECC_DECDONE); if (dec & ecc->sectors) { + /* + * Clear decode IRQ status once again to ensure that + * there will be no extra IRQ. + */ + readw(ecc->regs + ECC_DECIRQ_STA); ecc->sectors = 0; complete(&ecc->done); } else { @@ -130,8 +135,6 @@ static irqreturn_t mtk_ecc_irq(int irq, void *id) } } - writel(0, ecc->regs + ECC_IRQ_REG(op)); - return IRQ_HANDLED; } @@ -307,6 +310,12 @@ void mtk_ecc_disable(struct mtk_ecc *ecc) /* disable it */ mtk_ecc_wait_idle(ecc, op); + if (op == ECC_DECODE) + /* + * Clear decode IRQ status in case there is a timeout to wait + * decode IRQ. + */ + readw(ecc->regs + ECC_DECIRQ_STA); writew(0, ecc->regs + ECC_IRQ_REG(op)); writew(ECC_OP_DISABLE, ecc->regs + ECC_CTL_REG(op)); diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 53e5e0337c3e..f3be0b2a8869 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -415,7 +415,7 @@ static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq) * waits for completion. */ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq) { - pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq); + dev_dbg(host->dev, "send_cmd(host, 0x%x, %d)\n", cmd, useirq); writew(cmd, NFC_V1_V2_FLASH_CMD); writew(NFC_CMD, NFC_V1_V2_CONFIG2); @@ -431,7 +431,7 @@ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq) udelay(1); } if (max_retries < 0) - pr_debug("%s: RESET failed\n", __func__); + dev_dbg(host->dev, "%s: RESET failed\n", __func__); } else { /* Wait for operation to complete */ wait_op_done(host, useirq); @@ -454,7 +454,7 @@ static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast) * a NAND command. */ static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast) { - pr_debug("send_addr(host, 0x%x %d)\n", addr, islast); + dev_dbg(host->dev, "send_addr(host, 0x%x %d)\n", addr, islast); writew(addr, NFC_V1_V2_FLASH_ADDR); writew(NFC_ADDR, NFC_V1_V2_CONFIG2); @@ -607,7 +607,7 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat, uint16_t ecc_status = get_ecc_status_v1(host); if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) { - pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n"); + dev_dbg(host->dev, "HWECC uncorrectable 2-bit ECC error\n"); return -EBADMSG; } @@ -634,7 +634,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat, do { err = ecc_stat & ecc_bit_mask; if (err > err_limit) { - printk(KERN_WARNING "UnCorrectable RS-ECC Error\n"); + dev_dbg(host->dev, "UnCorrectable RS-ECC Error\n"); return -EBADMSG; } else { ret += err; @@ -642,7 +642,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat, ecc_stat >>= 4; } while (--no_subpages); - pr_debug("%d Symbol Correctable RS-ECC Error\n", ret); + dev_dbg(host->dev, "%d Symbol Correctable RS-ECC Error\n", ret); return ret; } @@ -673,7 +673,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd) host->buf_start++; } - pr_debug("%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start); + dev_dbg(host->dev, "%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start); return ret; } @@ -859,8 +859,7 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) host->devtype_data->send_addr(host, (page_addr >> 8) & 0xff, true); } else { - /* One more address cycle for higher density devices */ - if (mtd->size >= 0x4000000) { + if (nand_chip->options & NAND_ROW_ADDR_3) { /* paddr_8 - paddr_15 */ host->devtype_data->send_addr(host, (page_addr >> 8) & 0xff, @@ -1212,7 +1211,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, struct nand_chip *nand_chip = mtd_to_nand(mtd); struct mxc_nand_host *host = nand_get_controller_data(nand_chip); - pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n", + dev_dbg(host->dev, "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n", command, column, page_addr); /* Reset command state information */ diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 12edaae17d81..6135d007a068 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -115,7 +115,7 @@ static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section, struct nand_chip *chip = mtd_to_nand(mtd); struct nand_ecc_ctrl *ecc = &chip->ecc; - if (section) + if (section || !ecc->total) return -ERANGE; oobregion->length = ecc->total; @@ -727,8 +727,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, chip->cmd_ctrl(mtd, page_addr, ctrl); ctrl &= ~NAND_CTRL_CHANGE; chip->cmd_ctrl(mtd, page_addr >> 8, ctrl); - /* One more address cycle for devices > 32MiB */ - if (chip->chipsize > (32 << 20)) + if (chip->options & NAND_ROW_ADDR_3) chip->cmd_ctrl(mtd, page_addr >> 16, ctrl); } chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); @@ -854,8 +853,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, chip->cmd_ctrl(mtd, page_addr, ctrl); chip->cmd_ctrl(mtd, page_addr >> 8, NAND_NCE | NAND_ALE); - /* One more address cycle for devices > 128MiB */ - if (chip->chipsize > (128 << 20)) + if (chip->options & NAND_ROW_ADDR_3) chip->cmd_ctrl(mtd, page_addr >> 16, NAND_NCE | NAND_ALE); } @@ -1246,6 +1244,7 @@ int nand_reset(struct nand_chip *chip, int chipnr) return 0; } +EXPORT_SYMBOL_GPL(nand_reset); /** * nand_check_erased_buf - check if a buffer contains (almost) only 0xff data @@ -2799,15 +2798,18 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const uint8_t *buf) { struct nand_chip *chip = mtd_to_nand(mtd); + int chipnr = (int)(to >> chip->chip_shift); struct mtd_oob_ops ops; int ret; - /* Wait for the device to get ready */ - panic_nand_wait(mtd, chip, 400); - /* Grab the device */ panic_nand_get_device(chip, mtd, FL_WRITING); + chip->select_chip(mtd, chipnr); + + /* Wait for the device to get ready */ + panic_nand_wait(mtd, chip, 400); + memset(&ops, 0, sizeof(ops)); ops.len = len; ops.datbuf = (uint8_t *)buf; @@ -3999,6 +4001,9 @@ ident_done: chip->chip_shift += 32 - 1; } + if (chip->chip_shift - chip->page_shift > 16) + chip->options |= NAND_ROW_ADDR_3; + chip->badblockbits = 8; chip->erase = single_erase; @@ -4700,6 +4705,19 @@ int nand_scan_tail(struct mtd_info *mtd) mtd_set_ooblayout(mtd, &nand_ooblayout_lp_hamming_ops); break; default: + /* + * Expose the whole OOB area to users if ECC_NONE + * is passed. We could do that for all kind of + * ->oobsize, but we must keep the old large/small + * page with ECC layout when ->oobsize <= 128 for + * compatibility reasons. + */ + if (ecc->mode == NAND_ECC_NONE) { + mtd_set_ooblayout(mtd, + &nand_ooblayout_lp_ops); + break; + } + WARN(1, "No oob scheme defined for oobsize %d\n", mtd->oobsize); ret = -EINVAL; diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 246b4393118e..44322a363ba5 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -520,11 +520,16 @@ static int nandsim_debugfs_create(struct nandsim *dev) struct dentry *root = nsmtd->dbg.dfs_dir; struct dentry *dent; - if (!IS_ENABLED(CONFIG_DEBUG_FS)) + /* + * Just skip debugfs initialization when the debugfs directory is + * missing. + */ + if (IS_ERR_OR_NULL(root)) { + if (IS_ENABLED(CONFIG_DEBUG_FS) && + !IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER)) + NS_WARN("CONFIG_MTD_PARTITIONED_MASTER must be enabled to expose debugfs stuff\n"); return 0; - - if (IS_ERR_OR_NULL(root)) - return -1; + } dent = debugfs_create_file("nandsim_wear_report", S_IRUSR, root, dev, &dfs_fops); diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c index 7bb4d2ea9342..af5b32c9a791 100644 --- a/drivers/mtd/nand/nuc900_nand.c +++ b/drivers/mtd/nand/nuc900_nand.c @@ -154,7 +154,7 @@ static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command, if (page_addr != -1) { write_addr_reg(nand, page_addr); - if (chip->chipsize > (128 << 20)) { + if (chip->options & NAND_ROW_ADDR_3) { write_addr_reg(nand, page_addr >> 8); write_addr_reg(nand, page_addr >> 16 | ENDADDR); } else { diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 54540c8fa1a2..dad438c4906a 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1133,129 +1133,172 @@ static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2, 0x97, 0x79, 0xe5, 0x24, 0xb5}; /** - * omap_calculate_ecc_bch - Generate bytes of ECC bytes + * _omap_calculate_ecc_bch - Generate ECC bytes for one sector * @mtd: MTD device structure * @dat: The pointer to data on which ecc is computed * @ecc_code: The ecc_code buffer + * @i: The sector number (for a multi sector page) * - * Support calculating of BCH4/8 ecc vectors for the page + * Support calculating of BCH4/8/16 ECC vectors for one sector + * within a page. Sector number is in @i. */ -static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, - const u_char *dat, u_char *ecc_calc) +static int _omap_calculate_ecc_bch(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc, int i) { struct omap_nand_info *info = mtd_to_omap(mtd); int eccbytes = info->nand.ecc.bytes; struct gpmc_nand_regs *gpmc_regs = &info->reg; u8 *ecc_code; - unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4; + unsigned long bch_val1, bch_val2, bch_val3, bch_val4; u32 val; - int i, j; + int j; + + ecc_code = ecc_calc; + switch (info->ecc_opt) { + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + case OMAP_ECC_BCH8_CODE_HW: + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); + bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); + bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); + *ecc_code++ = (bch_val4 & 0xFF); + *ecc_code++ = ((bch_val3 >> 24) & 0xFF); + *ecc_code++ = ((bch_val3 >> 16) & 0xFF); + *ecc_code++ = ((bch_val3 >> 8) & 0xFF); + *ecc_code++ = (bch_val3 & 0xFF); + *ecc_code++ = ((bch_val2 >> 24) & 0xFF); + *ecc_code++ = ((bch_val2 >> 16) & 0xFF); + *ecc_code++ = ((bch_val2 >> 8) & 0xFF); + *ecc_code++ = (bch_val2 & 0xFF); + *ecc_code++ = ((bch_val1 >> 24) & 0xFF); + *ecc_code++ = ((bch_val1 >> 16) & 0xFF); + *ecc_code++ = ((bch_val1 >> 8) & 0xFF); + *ecc_code++ = (bch_val1 & 0xFF); + break; + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + case OMAP_ECC_BCH4_CODE_HW: + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); + *ecc_code++ = ((bch_val2 >> 12) & 0xFF); + *ecc_code++ = ((bch_val2 >> 4) & 0xFF); + *ecc_code++ = ((bch_val2 & 0xF) << 4) | + ((bch_val1 >> 28) & 0xF); + *ecc_code++ = ((bch_val1 >> 20) & 0xFF); + *ecc_code++ = ((bch_val1 >> 12) & 0xFF); + *ecc_code++ = ((bch_val1 >> 4) & 0xFF); + *ecc_code++ = ((bch_val1 & 0xF) << 4); + break; + case OMAP_ECC_BCH16_CODE_HW: + val = readl(gpmc_regs->gpmc_bch_result6[i]); + ecc_code[0] = ((val >> 8) & 0xFF); + ecc_code[1] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result5[i]); + ecc_code[2] = ((val >> 24) & 0xFF); + ecc_code[3] = ((val >> 16) & 0xFF); + ecc_code[4] = ((val >> 8) & 0xFF); + ecc_code[5] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result4[i]); + ecc_code[6] = ((val >> 24) & 0xFF); + ecc_code[7] = ((val >> 16) & 0xFF); + ecc_code[8] = ((val >> 8) & 0xFF); + ecc_code[9] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result3[i]); + ecc_code[10] = ((val >> 24) & 0xFF); + ecc_code[11] = ((val >> 16) & 0xFF); + ecc_code[12] = ((val >> 8) & 0xFF); + ecc_code[13] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result2[i]); + ecc_code[14] = ((val >> 24) & 0xFF); + ecc_code[15] = ((val >> 16) & 0xFF); + ecc_code[16] = ((val >> 8) & 0xFF); + ecc_code[17] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result1[i]); + ecc_code[18] = ((val >> 24) & 0xFF); + ecc_code[19] = ((val >> 16) & 0xFF); + ecc_code[20] = ((val >> 8) & 0xFF); + ecc_code[21] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result0[i]); + ecc_code[22] = ((val >> 24) & 0xFF); + ecc_code[23] = ((val >> 16) & 0xFF); + ecc_code[24] = ((val >> 8) & 0xFF); + ecc_code[25] = ((val >> 0) & 0xFF); + break; + default: + return -EINVAL; + } + + /* ECC scheme specific syndrome customizations */ + switch (info->ecc_opt) { + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + /* Add constant polynomial to remainder, so that + * ECC of blank pages results in 0x0 on reading back + */ + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch4_polynomial[j]; + break; + case OMAP_ECC_BCH4_CODE_HW: + /* Set 8th ECC byte as 0x0 for ROM compatibility */ + ecc_calc[eccbytes - 1] = 0x0; + break; + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + /* Add constant polynomial to remainder, so that + * ECC of blank pages results in 0x0 on reading back + */ + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch8_polynomial[j]; + break; + case OMAP_ECC_BCH8_CODE_HW: + /* Set 14th ECC byte as 0x0 for ROM compatibility */ + ecc_calc[eccbytes - 1] = 0x0; + break; + case OMAP_ECC_BCH16_CODE_HW: + break; + default: + return -EINVAL; + } + + return 0; +} + +/** + * omap_calculate_ecc_bch_sw - ECC generator for sector for SW based correction + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + * + * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used + * when SW based correction is required as ECC is required for one sector + * at a time. + */ +static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc) +{ + return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0); +} + +/** + * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + * + * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go. + */ +static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc) +{ + struct omap_nand_info *info = mtd_to_omap(mtd); + int eccbytes = info->nand.ecc.bytes; + unsigned long nsectors; + int i, ret; nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; for (i = 0; i < nsectors; i++) { - ecc_code = ecc_calc; - switch (info->ecc_opt) { - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: - case OMAP_ECC_BCH8_CODE_HW: - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); - bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); - bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); - *ecc_code++ = (bch_val4 & 0xFF); - *ecc_code++ = ((bch_val3 >> 24) & 0xFF); - *ecc_code++ = ((bch_val3 >> 16) & 0xFF); - *ecc_code++ = ((bch_val3 >> 8) & 0xFF); - *ecc_code++ = (bch_val3 & 0xFF); - *ecc_code++ = ((bch_val2 >> 24) & 0xFF); - *ecc_code++ = ((bch_val2 >> 16) & 0xFF); - *ecc_code++ = ((bch_val2 >> 8) & 0xFF); - *ecc_code++ = (bch_val2 & 0xFF); - *ecc_code++ = ((bch_val1 >> 24) & 0xFF); - *ecc_code++ = ((bch_val1 >> 16) & 0xFF); - *ecc_code++ = ((bch_val1 >> 8) & 0xFF); - *ecc_code++ = (bch_val1 & 0xFF); - break; - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: - case OMAP_ECC_BCH4_CODE_HW: - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); - *ecc_code++ = ((bch_val2 >> 12) & 0xFF); - *ecc_code++ = ((bch_val2 >> 4) & 0xFF); - *ecc_code++ = ((bch_val2 & 0xF) << 4) | - ((bch_val1 >> 28) & 0xF); - *ecc_code++ = ((bch_val1 >> 20) & 0xFF); - *ecc_code++ = ((bch_val1 >> 12) & 0xFF); - *ecc_code++ = ((bch_val1 >> 4) & 0xFF); - *ecc_code++ = ((bch_val1 & 0xF) << 4); - break; - case OMAP_ECC_BCH16_CODE_HW: - val = readl(gpmc_regs->gpmc_bch_result6[i]); - ecc_code[0] = ((val >> 8) & 0xFF); - ecc_code[1] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result5[i]); - ecc_code[2] = ((val >> 24) & 0xFF); - ecc_code[3] = ((val >> 16) & 0xFF); - ecc_code[4] = ((val >> 8) & 0xFF); - ecc_code[5] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result4[i]); - ecc_code[6] = ((val >> 24) & 0xFF); - ecc_code[7] = ((val >> 16) & 0xFF); - ecc_code[8] = ((val >> 8) & 0xFF); - ecc_code[9] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result3[i]); - ecc_code[10] = ((val >> 24) & 0xFF); - ecc_code[11] = ((val >> 16) & 0xFF); - ecc_code[12] = ((val >> 8) & 0xFF); - ecc_code[13] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result2[i]); - ecc_code[14] = ((val >> 24) & 0xFF); - ecc_code[15] = ((val >> 16) & 0xFF); - ecc_code[16] = ((val >> 8) & 0xFF); - ecc_code[17] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result1[i]); - ecc_code[18] = ((val >> 24) & 0xFF); - ecc_code[19] = ((val >> 16) & 0xFF); - ecc_code[20] = ((val >> 8) & 0xFF); - ecc_code[21] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result0[i]); - ecc_code[22] = ((val >> 24) & 0xFF); - ecc_code[23] = ((val >> 16) & 0xFF); - ecc_code[24] = ((val >> 8) & 0xFF); - ecc_code[25] = ((val >> 0) & 0xFF); - break; - default: - return -EINVAL; - } - - /* ECC scheme specific syndrome customizations */ - switch (info->ecc_opt) { - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: - /* Add constant polynomial to remainder, so that - * ECC of blank pages results in 0x0 on reading back */ - for (j = 0; j < eccbytes; j++) - ecc_calc[j] ^= bch4_polynomial[j]; - break; - case OMAP_ECC_BCH4_CODE_HW: - /* Set 8th ECC byte as 0x0 for ROM compatibility */ - ecc_calc[eccbytes - 1] = 0x0; - break; - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: - /* Add constant polynomial to remainder, so that - * ECC of blank pages results in 0x0 on reading back */ - for (j = 0; j < eccbytes; j++) - ecc_calc[j] ^= bch8_polynomial[j]; - break; - case OMAP_ECC_BCH8_CODE_HW: - /* Set 14th ECC byte as 0x0 for ROM compatibility */ - ecc_calc[eccbytes - 1] = 0x0; - break; - case OMAP_ECC_BCH16_CODE_HW: - break; - default: - return -EINVAL; - } + ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i); + if (ret) + return ret; - ecc_calc += eccbytes; + ecc_calc += eccbytes; } return 0; @@ -1496,7 +1539,7 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, chip->write_buf(mtd, buf, mtd->writesize); /* Update ecc vector from GPMC result registers */ - chip->ecc.calculate(mtd, buf, &ecc_calc[0]); + omap_calculate_ecc_bch_multi(mtd, buf, &ecc_calc[0]); ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, chip->ecc.total); @@ -1509,6 +1552,72 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, } /** + * omap_write_subpage_bch - BCH hardware ECC based subpage write + * @mtd: mtd info structure + * @chip: nand chip info structure + * @offset: column address of subpage within the page + * @data_len: data length + * @buf: data buffer + * @oob_required: must write chip->oob_poi to OOB + * @page: page number to write + * + * OMAP optimized subpage write method. + */ +static int omap_write_subpage_bch(struct mtd_info *mtd, + struct nand_chip *chip, u32 offset, + u32 data_len, const u8 *buf, + int oob_required, int page) +{ + u8 *ecc_calc = chip->buffers->ecccalc; + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + int ecc_steps = chip->ecc.steps; + u32 start_step = offset / ecc_size; + u32 end_step = (offset + data_len - 1) / ecc_size; + int step, ret = 0; + + /* + * Write entire page at one go as it would be optimal + * as ECC is calculated by hardware. + * ECC is calculated for all subpages but we choose + * only what we want. + */ + + /* Enable GPMC ECC engine */ + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); + + /* Write data */ + chip->write_buf(mtd, buf, mtd->writesize); + + for (step = 0; step < ecc_steps; step++) { + /* mask ECC of un-touched subpages by padding 0xFF */ + if (step < start_step || step > end_step) + memset(ecc_calc, 0xff, ecc_bytes); + else + ret = _omap_calculate_ecc_bch(mtd, buf, ecc_calc, step); + + if (ret) + return ret; + + buf += ecc_size; + ecc_calc += ecc_bytes; + } + + /* copy calculated ECC for whole page to chip->buffer->oob */ + /* this include masked-value(0xFF) for unwritten subpages */ + ecc_calc = chip->buffers->ecccalc; + ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; + + /* write OOB buffer to NAND device */ + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + +/** * omap_read_page_bch - BCH ecc based page read function for entire page * @mtd: mtd info structure * @chip: nand chip info structure @@ -1544,7 +1653,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, chip->ecc.total); /* Calculate ecc bytes */ - chip->ecc.calculate(mtd, buf, ecc_calc); + omap_calculate_ecc_bch_multi(mtd, buf, ecc_calc); ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, chip->ecc.total); @@ -1588,8 +1697,7 @@ static bool is_elm_present(struct omap_nand_info *info, return true; } -static bool omap2_nand_ecc_check(struct omap_nand_info *info, - struct omap_nand_platform_data *pdata) +static bool omap2_nand_ecc_check(struct omap_nand_info *info) { bool ecc_needs_bch, ecc_needs_omap_bch, ecc_needs_elm; @@ -1804,7 +1912,6 @@ static const struct mtd_ooblayout_ops omap_sw_ooblayout_ops = { static int omap_nand_probe(struct platform_device *pdev) { struct omap_nand_info *info; - struct omap_nand_platform_data *pdata = NULL; struct mtd_info *mtd; struct nand_chip *nand_chip; int err; @@ -1821,29 +1928,10 @@ static int omap_nand_probe(struct platform_device *pdev) info->pdev = pdev; - if (dev->of_node) { - if (omap_get_dt_info(dev, info)) - return -EINVAL; - } else { - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - dev_err(&pdev->dev, "platform data missing\n"); - return -EINVAL; - } - - info->gpmc_cs = pdata->cs; - info->reg = pdata->reg; - info->ecc_opt = pdata->ecc_opt; - if (pdata->dev_ready) - dev_info(&pdev->dev, "pdata->dev_ready is deprecated\n"); - - info->xfer_type = pdata->xfer_type; - info->devsize = pdata->devsize; - info->elm_of_node = pdata->elm_of_node; - info->flash_bbt = pdata->flash_bbt; - } + err = omap_get_dt_info(dev, info); + if (err) + return err; - platform_set_drvdata(pdev, info); info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs); if (!info->ops) { dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n"); @@ -2002,7 +2090,7 @@ static int omap_nand_probe(struct platform_device *pdev) goto return_error; } - if (!omap2_nand_ecc_check(info, pdata)) { + if (!omap2_nand_ecc_check(info)) { err = -EINVAL; goto return_error; } @@ -2044,7 +2132,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 4; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = nand_bch_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); /* Reserve one byte for the OMAP marker */ oobbytes_per_step = nand_chip->ecc.bytes + 1; @@ -2066,9 +2154,9 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 4; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes; @@ -2087,7 +2175,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 8; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = nand_bch_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); /* Reserve one byte for the OMAP marker */ oobbytes_per_step = nand_chip->ecc.bytes + 1; @@ -2109,9 +2197,9 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 8; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes; @@ -2131,9 +2219,9 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 16; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes; @@ -2167,10 +2255,9 @@ scan_tail: if (err) goto return_error; - if (dev->of_node) - mtd_device_register(mtd, NULL, 0); - else - mtd_device_register(mtd, pdata->parts, pdata->nr_parts); + err = mtd_device_register(mtd, NULL, 0); + if (err) + goto return_error; platform_set_drvdata(pdev, mtd); diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 85cff68643e0..90b9a9ccbe60 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -30,6 +30,8 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #define CHIP_DELAY_TIMEOUT msecs_to_jiffies(200) #define NAND_STOP_DELAY msecs_to_jiffies(40) @@ -45,6 +47,10 @@ */ #define INIT_BUFFER_SIZE 2048 +/* System control register and bit to enable NAND on some SoCs */ +#define GENCONF_SOC_DEVICE_MUX 0x208 +#define GENCONF_SOC_DEVICE_MUX_NFC_EN BIT(0) + /* registers and bit definitions */ #define NDCR (0x00) /* Control register */ #define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */ @@ -174,6 +180,7 @@ enum { enum pxa3xx_nand_variant { PXA3XX_NAND_VARIANT_PXA, PXA3XX_NAND_VARIANT_ARMADA370, + PXA3XX_NAND_VARIANT_ARMADA_8K, }; struct pxa3xx_nand_host { @@ -425,6 +432,10 @@ static const struct of_device_id pxa3xx_nand_dt_ids[] = { .compatible = "marvell,armada370-nand", .data = (void *)PXA3XX_NAND_VARIANT_ARMADA370, }, + { + .compatible = "marvell,armada-8k-nand", + .data = (void *)PXA3XX_NAND_VARIANT_ARMADA_8K, + }, {} }; MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids); @@ -825,7 +836,8 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) info->retcode = ERR_UNCORERR; if (status & NDSR_CORERR) { info->retcode = ERR_CORERR; - if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 && + if ((info->variant == PXA3XX_NAND_VARIANT_ARMADA370 || + info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) && info->ecc_bch) info->ecc_err_cnt = NDSR_ERR_CNT(status); else @@ -888,7 +900,8 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) nand_writel(info, NDCB0, info->ndcb2); /* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */ - if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) + if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 || + info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) nand_writel(info, NDCB0, info->ndcb3); } @@ -1671,7 +1684,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) chip->options |= NAND_BUSWIDTH_16; /* Device detection must be done with ECC disabled */ - if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) + if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 || + info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) nand_writel(info, NDECCCTRL, 0x0); if (pdata->flash_bbt) @@ -1709,7 +1723,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) * (aka splitted) command handling, */ if (mtd->writesize > PAGE_CHUNK_SIZE) { - if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) { + if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 || + info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) { chip->cmdfunc = nand_cmdfunc_extended; } else { dev_err(&info->pdev->dev, @@ -1928,6 +1943,24 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev) if (!of_id) return 0; + /* + * Some SoCs like A7k/A8k need to enable manually the NAND + * controller to avoid being bootloader dependent. This is done + * through the use of a single bit in the System Functions registers. + */ + if (pxa3xx_nand_get_variant(pdev) == PXA3XX_NAND_VARIANT_ARMADA_8K) { + struct regmap *sysctrl_base = syscon_regmap_lookup_by_phandle( + pdev->dev.of_node, "marvell,system-controller"); + u32 reg; + + if (IS_ERR(sysctrl_base)) + return PTR_ERR(sysctrl_base); + + regmap_read(sysctrl_base, GENCONF_SOC_DEVICE_MUX, ®); + reg |= GENCONF_SOC_DEVICE_MUX_NFC_EN; + regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX, reg); + } + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return -ENOMEM; diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c index 3baddfc997d1..2656c1ac5646 100644 --- a/drivers/mtd/nand/qcom_nandc.c +++ b/drivers/mtd/nand/qcom_nandc.c @@ -22,6 +22,7 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/delay.h> +#include <linux/dma/qcom_bam_dma.h> /* NANDc reg offsets */ #define NAND_FLASH_CMD 0x00 @@ -199,6 +200,15 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \ */ #define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg)) +/* Returns the NAND register physical address */ +#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset)) + +/* Returns the dma address for reg read buffer */ +#define reg_buf_dma_addr(chip, vaddr) \ + ((chip)->reg_read_dma + \ + ((uint8_t *)(vaddr) - (uint8_t *)(chip)->reg_read_buf)) + +#define QPIC_PER_CW_CMD_ELEMENTS 32 #define QPIC_PER_CW_CMD_SGL 32 #define QPIC_PER_CW_DATA_SGL 8 @@ -221,8 +231,13 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \ /* * This data type corresponds to the BAM transaction which will be used for all * NAND transfers. + * @bam_ce - the array of BAM command elements * @cmd_sgl - sgl for NAND BAM command pipe * @data_sgl - sgl for NAND BAM consumer/producer pipe + * @bam_ce_pos - the index in bam_ce which is available for next sgl + * @bam_ce_start - the index in bam_ce which marks the start position ce + * for current sgl. It will be used for size calculation + * for current sgl * @cmd_sgl_pos - current index in command sgl. * @cmd_sgl_start - start index in command sgl. * @tx_sgl_pos - current index in data sgl for tx. @@ -231,8 +246,11 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \ * @rx_sgl_start - start index in data sgl for rx. */ struct bam_transaction { + struct bam_cmd_element *bam_ce; struct scatterlist *cmd_sgl; struct scatterlist *data_sgl; + u32 bam_ce_pos; + u32 bam_ce_start; u32 cmd_sgl_pos; u32 cmd_sgl_start; u32 tx_sgl_pos; @@ -307,7 +325,8 @@ struct nandc_regs { * controller * @dev: parent device * @base: MMIO base - * @base_dma: physical base address of controller registers + * @base_phys: physical base address of controller registers + * @base_dma: dma base address of controller registers * @core_clk: controller clock * @aon_clk: another controller clock * @@ -340,6 +359,7 @@ struct qcom_nand_controller { struct device *dev; void __iomem *base; + phys_addr_t base_phys; dma_addr_t base_dma; struct clk *core_clk; @@ -462,7 +482,8 @@ alloc_bam_transaction(struct qcom_nand_controller *nandc) bam_txn_size = sizeof(*bam_txn) + num_cw * - ((sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) + + ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) + + (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) + (sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL)); bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL); @@ -472,6 +493,10 @@ alloc_bam_transaction(struct qcom_nand_controller *nandc) bam_txn = bam_txn_buf; bam_txn_buf += sizeof(*bam_txn); + bam_txn->bam_ce = bam_txn_buf; + bam_txn_buf += + sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw; + bam_txn->cmd_sgl = bam_txn_buf; bam_txn_buf += sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw; @@ -489,6 +514,8 @@ static void clear_bam_transaction(struct qcom_nand_controller *nandc) if (!nandc->props->is_bam) return; + bam_txn->bam_ce_pos = 0; + bam_txn->bam_ce_start = 0; bam_txn->cmd_sgl_pos = 0; bam_txn->cmd_sgl_start = 0; bam_txn->tx_sgl_pos = 0; @@ -734,6 +761,66 @@ static int prepare_bam_async_desc(struct qcom_nand_controller *nandc, } /* + * Prepares the command descriptor for BAM DMA which will be used for NAND + * register reads and writes. The command descriptor requires the command + * to be formed in command element type so this function uses the command + * element from bam transaction ce array and fills the same with required + * data. A single SGL can contain multiple command elements so + * NAND_BAM_NEXT_SGL will be used for starting the separate SGL + * after the current command element. + */ +static int prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read, + int reg_off, const void *vaddr, + int size, unsigned int flags) +{ + int bam_ce_size; + int i, ret; + struct bam_cmd_element *bam_ce_buffer; + struct bam_transaction *bam_txn = nandc->bam_txn; + + bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos]; + + /* fill the command desc */ + for (i = 0; i < size; i++) { + if (read) + bam_prep_ce(&bam_ce_buffer[i], + nandc_reg_phys(nandc, reg_off + 4 * i), + BAM_READ_COMMAND, + reg_buf_dma_addr(nandc, + (__le32 *)vaddr + i)); + else + bam_prep_ce_le32(&bam_ce_buffer[i], + nandc_reg_phys(nandc, reg_off + 4 * i), + BAM_WRITE_COMMAND, + *((__le32 *)vaddr + i)); + } + + bam_txn->bam_ce_pos += size; + + /* use the separate sgl after this command */ + if (flags & NAND_BAM_NEXT_SGL) { + bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start]; + bam_ce_size = (bam_txn->bam_ce_pos - + bam_txn->bam_ce_start) * + sizeof(struct bam_cmd_element); + sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos], + bam_ce_buffer, bam_ce_size); + bam_txn->cmd_sgl_pos++; + bam_txn->bam_ce_start = bam_txn->bam_ce_pos; + + if (flags & NAND_BAM_NWD) { + ret = prepare_bam_async_desc(nandc, nandc->cmd_chan, + DMA_PREP_FENCE | + DMA_PREP_CMD); + if (ret) + return ret; + } + } + + return 0; +} + +/* * Prepares the data descriptor for BAM DMA which will be used for NAND * data reads and writes. */ @@ -851,19 +938,22 @@ static int read_reg_dma(struct qcom_nand_controller *nandc, int first, { bool flow_control = false; void *vaddr; - int size; - if (first == NAND_READ_ID || first == NAND_FLASH_STATUS) - flow_control = true; + vaddr = nandc->reg_read_buf + nandc->reg_read_pos; + nandc->reg_read_pos += num_regs; if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1) first = dev_cmd_reg_addr(nandc, first); - size = num_regs * sizeof(u32); - vaddr = nandc->reg_read_buf + nandc->reg_read_pos; - nandc->reg_read_pos += num_regs; + if (nandc->props->is_bam) + return prep_bam_dma_desc_cmd(nandc, true, first, vaddr, + num_regs, flags); + + if (first == NAND_READ_ID || first == NAND_FLASH_STATUS) + flow_control = true; - return prep_adm_dma_desc(nandc, true, first, vaddr, size, flow_control); + return prep_adm_dma_desc(nandc, true, first, vaddr, + num_regs * sizeof(u32), flow_control); } /* @@ -880,13 +970,9 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first, bool flow_control = false; struct nandc_regs *regs = nandc->regs; void *vaddr; - int size; vaddr = offset_to_nandc_reg(regs, first); - if (first == NAND_FLASH_CMD) - flow_control = true; - if (first == NAND_ERASED_CW_DETECT_CFG) { if (flags & NAND_ERASED_CW_SET) vaddr = ®s->erased_cw_detect_cfg_set; @@ -903,10 +989,15 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first, if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD) first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD); - size = num_regs * sizeof(u32); + if (nandc->props->is_bam) + return prep_bam_dma_desc_cmd(nandc, false, first, vaddr, + num_regs, flags); + + if (first == NAND_FLASH_CMD) + flow_control = true; - return prep_adm_dma_desc(nandc, false, first, vaddr, size, - flow_control); + return prep_adm_dma_desc(nandc, false, first, vaddr, + num_regs * sizeof(u32), flow_control); } /* @@ -1170,7 +1261,8 @@ static int submit_descs(struct qcom_nand_controller *nandc) } if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) { - r = prepare_bam_async_desc(nandc, nandc->cmd_chan, 0); + r = prepare_bam_async_desc(nandc, nandc->cmd_chan, + DMA_PREP_CMD); if (r) return r; } @@ -2705,6 +2797,7 @@ static int qcom_nandc_probe(struct platform_device *pdev) if (IS_ERR(nandc->base)) return PTR_ERR(nandc->base); + nandc->base_phys = res->start; nandc->base_dma = phys_to_dma(dev, (phys_addr_t)res->start); nandc->core_clk = devm_clk_get(dev, "core"); diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index e7f3c98487e6..3c5008a4f5f3 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -1094,14 +1094,11 @@ MODULE_DEVICE_TABLE(of, of_flctl_match); static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev) { - const struct of_device_id *match; - struct flctl_soc_config *config; + const struct flctl_soc_config *config; struct sh_flctl_platform_data *pdata; - match = of_match_device(of_flctl_match, dev); - if (match) - config = (struct flctl_soc_config *)match->data; - else { + config = of_device_get_match_data(dev); + if (!config) { dev_err(dev, "%s: no OF configuration attached\n", __func__); return NULL; } diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig index d206b3c533bc..ee5ab994132f 100644 --- a/drivers/mtd/parsers/Kconfig +++ b/drivers/mtd/parsers/Kconfig @@ -6,3 +6,11 @@ config MTD_PARSER_TRX may contain up to 3/4 partitions (depending on the version). This driver will parse TRX header and report at least two partitions: kernel and rootfs. + +config MTD_SHARPSL_PARTS + tristate "Sharp SL Series NAND flash partition parser" + depends on MTD_NAND_SHARPSL || MTD_NAND_TMIO || COMPILE_TEST + help + This provides the read-only FTL logic necessary to read the partition + table from the NAND flash of Sharp SL Series (Zaurus) and the MTD + partition parser using this code. diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile index 4d9024e0be3b..5b1bcc3d90d9 100644 --- a/drivers/mtd/parsers/Makefile +++ b/drivers/mtd/parsers/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o +obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o diff --git a/drivers/mtd/parsers/sharpslpart.c b/drivers/mtd/parsers/sharpslpart.c new file mode 100644 index 000000000000..5fe0079ea5ed --- /dev/null +++ b/drivers/mtd/parsers/sharpslpart.c @@ -0,0 +1,398 @@ +/* + * sharpslpart.c - MTD partition parser for NAND flash using the SHARP FTL + * for logical addressing, as used on the PXA models of the SHARP SL Series. + * + * Copyright (C) 2017 Andrea Adami <andrea.adami@gmail.com> + * + * Based on SHARP GPL 2.4 sources: + * http://support.ezaurus.com/developer/source/source_dl.asp + * drivers/mtd/nand/sharp_sl_logical.c + * linux/include/asm-arm/sharp_nand_logical.h + * + * Copyright (C) 2002 SHARP + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/bitops.h> +#include <linux/sizes.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +/* oob structure */ +#define NAND_NOOB_LOGADDR_00 8 +#define NAND_NOOB_LOGADDR_01 9 +#define NAND_NOOB_LOGADDR_10 10 +#define NAND_NOOB_LOGADDR_11 11 +#define NAND_NOOB_LOGADDR_20 12 +#define NAND_NOOB_LOGADDR_21 13 + +#define BLOCK_IS_RESERVED 0xffff +#define BLOCK_UNMASK_COMPLEMENT 1 + +/* factory defaults */ +#define SHARPSL_NAND_PARTS 3 +#define SHARPSL_FTL_PART_SIZE (7 * SZ_1M) +#define SHARPSL_PARTINFO1_LADDR 0x00060000 +#define SHARPSL_PARTINFO2_LADDR 0x00064000 + +#define BOOT_MAGIC 0x424f4f54 +#define FSRO_MAGIC 0x4653524f +#define FSRW_MAGIC 0x46535257 + +/** + * struct sharpsl_ftl - Sharp FTL Logical Table + * @logmax: number of logical blocks + * @log2phy: the logical-to-physical table + * + * Structure containing the logical-to-physical translation table + * used by the SHARP SL FTL. + */ +struct sharpsl_ftl { + unsigned int logmax; + unsigned int *log2phy; +}; + +/* verify that the OOB bytes 8 to 15 are free and available for the FTL */ +static int sharpsl_nand_check_ooblayout(struct mtd_info *mtd) +{ + u8 freebytes = 0; + int section = 0; + + while (true) { + struct mtd_oob_region oobfree = { }; + int ret, i; + + ret = mtd_ooblayout_free(mtd, section++, &oobfree); + if (ret) + break; + + if (!oobfree.length || oobfree.offset > 15 || + (oobfree.offset + oobfree.length) < 8) + continue; + + i = oobfree.offset >= 8 ? oobfree.offset : 8; + for (; i < oobfree.offset + oobfree.length && i < 16; i++) + freebytes |= BIT(i - 8); + + if (freebytes == 0xff) + return 0; + } + + return -ENOTSUPP; +} + +static int sharpsl_nand_read_oob(struct mtd_info *mtd, loff_t offs, u8 *buf) +{ + struct mtd_oob_ops ops = { }; + int ret; + + ops.mode = MTD_OPS_PLACE_OOB; + ops.ooblen = mtd->oobsize; + ops.oobbuf = buf; + + ret = mtd_read_oob(mtd, offs, &ops); + if (ret != 0 || mtd->oobsize != ops.oobretlen) + return -1; + + return 0; +} + +/* + * The logical block number assigned to a physical block is stored in the OOB + * of the first page, in 3 16-bit copies with the following layout: + * + * 01234567 89abcdef + * -------- -------- + * ECC BB xyxyxy + * + * When reading we check that the first two copies agree. + * In case of error, matching is tried using the following pairs. + * Reserved values 0xffff mean the block is kept for wear leveling. + * + * 01234567 89abcdef + * -------- -------- + * ECC BB xyxy oob[8]==oob[10] && oob[9]==oob[11] -> byte0=8 byte1=9 + * ECC BB xyxy oob[10]==oob[12] && oob[11]==oob[13] -> byte0=10 byte1=11 + * ECC BB xy xy oob[12]==oob[8] && oob[13]==oob[9] -> byte0=12 byte1=13 + */ +static int sharpsl_nand_get_logical_num(u8 *oob) +{ + u16 us; + int good0, good1; + + if (oob[NAND_NOOB_LOGADDR_00] == oob[NAND_NOOB_LOGADDR_10] && + oob[NAND_NOOB_LOGADDR_01] == oob[NAND_NOOB_LOGADDR_11]) { + good0 = NAND_NOOB_LOGADDR_00; + good1 = NAND_NOOB_LOGADDR_01; + } else if (oob[NAND_NOOB_LOGADDR_10] == oob[NAND_NOOB_LOGADDR_20] && + oob[NAND_NOOB_LOGADDR_11] == oob[NAND_NOOB_LOGADDR_21]) { + good0 = NAND_NOOB_LOGADDR_10; + good1 = NAND_NOOB_LOGADDR_11; + } else if (oob[NAND_NOOB_LOGADDR_20] == oob[NAND_NOOB_LOGADDR_00] && + oob[NAND_NOOB_LOGADDR_21] == oob[NAND_NOOB_LOGADDR_01]) { + good0 = NAND_NOOB_LOGADDR_20; + good1 = NAND_NOOB_LOGADDR_21; + } else { + return -EINVAL; + } + + us = oob[good0] | oob[good1] << 8; + + /* parity check */ + if (hweight16(us) & BLOCK_UNMASK_COMPLEMENT) + return -EINVAL; + + /* reserved */ + if (us == BLOCK_IS_RESERVED) + return BLOCK_IS_RESERVED; + + return (us >> 1) & GENMASK(9, 0); +} + +static int sharpsl_nand_init_ftl(struct mtd_info *mtd, struct sharpsl_ftl *ftl) +{ + unsigned int block_num, log_num, phymax; + loff_t block_adr; + u8 *oob; + int i, ret; + + oob = kzalloc(mtd->oobsize, GFP_KERNEL); + if (!oob) + return -ENOMEM; + + phymax = mtd_div_by_eb(SHARPSL_FTL_PART_SIZE, mtd); + + /* FTL reserves 5% of the blocks + 1 spare */ + ftl->logmax = ((phymax * 95) / 100) - 1; + + ftl->log2phy = kmalloc_array(ftl->logmax, sizeof(*ftl->log2phy), + GFP_KERNEL); + if (!ftl->log2phy) { + ret = -ENOMEM; + goto exit; + } + + /* initialize ftl->log2phy */ + for (i = 0; i < ftl->logmax; i++) + ftl->log2phy[i] = UINT_MAX; + + /* create physical-logical table */ + for (block_num = 0; block_num < phymax; block_num++) { + block_adr = block_num * mtd->erasesize; + + if (mtd_block_isbad(mtd, block_adr)) + continue; + + if (sharpsl_nand_read_oob(mtd, block_adr, oob)) + continue; + + /* get logical block */ + log_num = sharpsl_nand_get_logical_num(oob); + + /* cut-off errors and skip the out-of-range values */ + if (log_num > 0 && log_num < ftl->logmax) { + if (ftl->log2phy[log_num] == UINT_MAX) + ftl->log2phy[log_num] = block_num; + } + } + + pr_info("Sharp SL FTL: %d blocks used (%d logical, %d reserved)\n", + phymax, ftl->logmax, phymax - ftl->logmax); + + ret = 0; +exit: + kfree(oob); + return ret; +} + +void sharpsl_nand_cleanup_ftl(struct sharpsl_ftl *ftl) +{ + kfree(ftl->log2phy); +} + +static int sharpsl_nand_read_laddr(struct mtd_info *mtd, + loff_t from, + size_t len, + void *buf, + struct sharpsl_ftl *ftl) +{ + unsigned int log_num, final_log_num; + unsigned int block_num; + loff_t block_adr; + loff_t block_ofs; + size_t retlen; + int err; + + log_num = mtd_div_by_eb((u32)from, mtd); + final_log_num = mtd_div_by_eb(((u32)from + len - 1), mtd); + + if (len <= 0 || log_num >= ftl->logmax || final_log_num > log_num) + return -EINVAL; + + block_num = ftl->log2phy[log_num]; + block_adr = block_num * mtd->erasesize; + block_ofs = mtd_mod_by_eb((u32)from, mtd); + + err = mtd_read(mtd, block_adr + block_ofs, len, &retlen, buf); + /* Ignore corrected ECC errors */ + if (mtd_is_bitflip(err)) + err = 0; + + if (!err && retlen != len) + err = -EIO; + + if (err) + pr_err("sharpslpart: error, read failed at %#llx\n", + block_adr + block_ofs); + + return err; +} + +/* + * MTD Partition Parser + * + * Sample values read from SL-C860 + * + * # cat /proc/mtd + * dev: size erasesize name + * mtd0: 006d0000 00020000 "Filesystem" + * mtd1: 00700000 00004000 "smf" + * mtd2: 03500000 00004000 "root" + * mtd3: 04400000 00004000 "home" + * + * PARTITIONINFO1 + * 0x00060000: 00 00 00 00 00 00 70 00 42 4f 4f 54 00 00 00 00 ......p.BOOT.... + * 0x00060010: 00 00 70 00 00 00 c0 03 46 53 52 4f 00 00 00 00 ..p.....FSRO.... + * 0x00060020: 00 00 c0 03 00 00 00 04 46 53 52 57 00 00 00 00 ........FSRW.... + */ +struct sharpsl_nand_partinfo { + __le32 start; + __le32 end; + __be32 magic; + u32 reserved; +}; + +static int sharpsl_nand_read_partinfo(struct mtd_info *master, + loff_t from, + size_t len, + struct sharpsl_nand_partinfo *buf, + struct sharpsl_ftl *ftl) +{ + int ret; + + ret = sharpsl_nand_read_laddr(master, from, len, buf, ftl); + if (ret) + return ret; + + /* check for magics */ + if (be32_to_cpu(buf[0].magic) != BOOT_MAGIC || + be32_to_cpu(buf[1].magic) != FSRO_MAGIC || + be32_to_cpu(buf[2].magic) != FSRW_MAGIC) { + pr_err("sharpslpart: magic values mismatch\n"); + return -EINVAL; + } + + /* fixup for hardcoded value 64 MiB (for older models) */ + buf[2].end = cpu_to_le32(master->size); + + /* extra sanity check */ + if (le32_to_cpu(buf[0].end) <= le32_to_cpu(buf[0].start) || + le32_to_cpu(buf[1].start) < le32_to_cpu(buf[0].end) || + le32_to_cpu(buf[1].end) <= le32_to_cpu(buf[1].start) || + le32_to_cpu(buf[2].start) < le32_to_cpu(buf[1].end) || + le32_to_cpu(buf[2].end) <= le32_to_cpu(buf[2].start)) { + pr_err("sharpslpart: partition sizes mismatch\n"); + return -EINVAL; + } + + return 0; +} + +static int sharpsl_parse_mtd_partitions(struct mtd_info *master, + const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) +{ + struct sharpsl_ftl ftl; + struct sharpsl_nand_partinfo buf[SHARPSL_NAND_PARTS]; + struct mtd_partition *sharpsl_nand_parts; + int err; + + /* check that OOB bytes 8 to 15 used by the FTL are actually free */ + err = sharpsl_nand_check_ooblayout(master); + if (err) + return err; + + /* init logical mgmt (FTL) */ + err = sharpsl_nand_init_ftl(master, &ftl); + if (err) + return err; + + /* read and validate first partition table */ + pr_info("sharpslpart: try reading first partition table\n"); + err = sharpsl_nand_read_partinfo(master, + SHARPSL_PARTINFO1_LADDR, + sizeof(buf), buf, &ftl); + if (err) { + /* fallback: read second partition table */ + pr_warn("sharpslpart: first partition table is invalid, retry using the second\n"); + err = sharpsl_nand_read_partinfo(master, + SHARPSL_PARTINFO2_LADDR, + sizeof(buf), buf, &ftl); + } + + /* cleanup logical mgmt (FTL) */ + sharpsl_nand_cleanup_ftl(&ftl); + + if (err) { + pr_err("sharpslpart: both partition tables are invalid\n"); + return err; + } + + sharpsl_nand_parts = kzalloc(sizeof(*sharpsl_nand_parts) * + SHARPSL_NAND_PARTS, GFP_KERNEL); + if (!sharpsl_nand_parts) + return -ENOMEM; + + /* original names */ + sharpsl_nand_parts[0].name = "smf"; + sharpsl_nand_parts[0].offset = le32_to_cpu(buf[0].start); + sharpsl_nand_parts[0].size = le32_to_cpu(buf[0].end) - + le32_to_cpu(buf[0].start); + + sharpsl_nand_parts[1].name = "root"; + sharpsl_nand_parts[1].offset = le32_to_cpu(buf[1].start); + sharpsl_nand_parts[1].size = le32_to_cpu(buf[1].end) - + le32_to_cpu(buf[1].start); + + sharpsl_nand_parts[2].name = "home"; + sharpsl_nand_parts[2].offset = le32_to_cpu(buf[2].start); + sharpsl_nand_parts[2].size = le32_to_cpu(buf[2].end) - + le32_to_cpu(buf[2].start); + + *pparts = sharpsl_nand_parts; + return SHARPSL_NAND_PARTS; +} + +static struct mtd_part_parser sharpsl_mtd_parser = { + .parse_fn = sharpsl_parse_mtd_partitions, + .name = "sharpslpart", +}; +module_mtd_part_parser(sharpsl_mtd_parser); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Andrea Adami <andrea.adami@gmail.com>"); +MODULE_DESCRIPTION("MTD partitioning for NAND flash on Sharp SL Series"); diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 69c638dd0484..89da88e59121 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -50,7 +50,7 @@ config SPI_ATMEL_QUADSPI config SPI_CADENCE_QUADSPI tristate "Cadence Quad SPI controller" - depends on OF && (ARM || COMPILE_TEST) + depends on OF && (ARM || ARM64 || COMPILE_TEST) help Enable support for the Cadence Quad SPI Flash controller. @@ -90,7 +90,7 @@ config SPI_INTEL_SPI tristate config SPI_INTEL_SPI_PCI - tristate "Intel PCH/PCU SPI flash PCI driver" if EXPERT + tristate "Intel PCH/PCU SPI flash PCI driver" depends on X86 && PCI select SPI_INTEL_SPI help @@ -106,7 +106,7 @@ config SPI_INTEL_SPI_PCI will be called intel-spi-pci. config SPI_INTEL_SPI_PLATFORM - tristate "Intel PCH/PCU SPI flash platform driver" if EXPERT + tristate "Intel PCH/PCU SPI flash platform driver" depends on X86 select SPI_INTEL_SPI help diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 53c7d8e0327a..75a2bc447a99 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -31,6 +31,7 @@ #include <linux/of_device.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/sched.h> #include <linux/spi/spi.h> #include <linux/timer.h> @@ -38,6 +39,9 @@ #define CQSPI_NAME "cadence-qspi" #define CQSPI_MAX_CHIPSELECT 16 +/* Quirks */ +#define CQSPI_NEEDS_WR_DELAY BIT(0) + struct cqspi_st; struct cqspi_flash_pdata { @@ -75,7 +79,9 @@ struct cqspi_st { bool is_decoded_cs; u32 fifo_depth; u32 fifo_width; + bool rclk_en; u32 trigger_address; + u32 wr_delay; struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT]; }; @@ -608,6 +614,15 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, reinit_completion(&cqspi->transfer_complete); writel(CQSPI_REG_INDIRECTWR_START_MASK, reg_base + CQSPI_REG_INDIRECTWR); + /* + * As per 66AK2G02 TRM SPRUHY8F section 11.15.5.3 Indirect Access + * Controller programming sequence, couple of cycles of + * QSPI_REF_CLK delay is required for the above bit to + * be internally synchronized by the QSPI module. Provide 5 + * cycles of delay. + */ + if (cqspi->wr_delay) + ndelay(cqspi->wr_delay); while (remaining > 0) { write_bytes = remaining > page_size ? page_size : remaining; @@ -775,7 +790,7 @@ static void cqspi_config_baudrate_div(struct cqspi_st *cqspi) } static void cqspi_readdata_capture(struct cqspi_st *cqspi, - const unsigned int bypass, + const bool bypass, const unsigned int delay) { void __iomem *reg_base = cqspi->iobase; @@ -839,7 +854,8 @@ static void cqspi_configure(struct spi_nor *nor) cqspi->sclk = sclk; cqspi_config_baudrate_div(cqspi); cqspi_delay(nor); - cqspi_readdata_capture(cqspi, 1, f_pdata->read_delay); + cqspi_readdata_capture(cqspi, !cqspi->rclk_en, + f_pdata->read_delay); } if (switch_cs || switch_ck) @@ -1036,6 +1052,8 @@ static int cqspi_of_get_pdata(struct platform_device *pdev) return -ENXIO; } + cqspi->rclk_en = of_property_read_bool(np, "cdns,rclk-en"); + return 0; } @@ -1156,6 +1174,7 @@ static int cqspi_probe(struct platform_device *pdev) struct cqspi_st *cqspi; struct resource *res; struct resource *res_ahb; + unsigned long data; int ret; int irq; @@ -1206,13 +1225,24 @@ static int cqspi_probe(struct platform_device *pdev) return -ENXIO; } + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + pm_runtime_put_noidle(dev); + return ret; + } + ret = clk_prepare_enable(cqspi->clk); if (ret) { dev_err(dev, "Cannot enable QSPI clock.\n"); - return ret; + goto probe_clk_failed; } cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk); + data = (unsigned long)of_device_get_match_data(dev); + if (data & CQSPI_NEEDS_WR_DELAY) + cqspi->wr_delay = 5 * DIV_ROUND_UP(NSEC_PER_SEC, + cqspi->master_ref_clk_hz); ret = devm_request_irq(dev, irq, cqspi_irq_handler, 0, pdev->name, cqspi); @@ -1233,10 +1263,13 @@ static int cqspi_probe(struct platform_device *pdev) } return ret; -probe_irq_failed: - cqspi_controller_enable(cqspi, 0); probe_setup_failed: + cqspi_controller_enable(cqspi, 0); +probe_irq_failed: clk_disable_unprepare(cqspi->clk); +probe_clk_failed: + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); return ret; } @@ -1253,6 +1286,9 @@ static int cqspi_remove(struct platform_device *pdev) clk_disable_unprepare(cqspi->clk); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return 0; } @@ -1284,7 +1320,14 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = { #endif static const struct of_device_id cqspi_dt_ids[] = { - {.compatible = "cdns,qspi-nor",}, + { + .compatible = "cdns,qspi-nor", + .data = (void *)0, + }, + { + .compatible = "ti,k2g-qspi", + .data = (void *)CQSPI_NEEDS_WR_DELAY, + }, { /* end of table */ } }; diff --git a/drivers/mtd/spi-nor/intel-spi-pci.c b/drivers/mtd/spi-nor/intel-spi-pci.c index e82652335ede..c0976f2e3dd1 100644 --- a/drivers/mtd/spi-nor/intel-spi-pci.c +++ b/drivers/mtd/spi-nor/intel-spi-pci.c @@ -63,7 +63,10 @@ static void intel_spi_pci_remove(struct pci_dev *pdev) } static const struct pci_device_id intel_spi_pci_ids[] = { + { PCI_VDEVICE(INTEL, 0x18e0), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info }, + { PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info }, + { PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info }, { }, }; MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids); diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c index 8a596bfeddff..ef034d898a23 100644 --- a/drivers/mtd/spi-nor/intel-spi.c +++ b/drivers/mtd/spi-nor/intel-spi.c @@ -67,8 +67,6 @@ #define PR_LIMIT_MASK (0x3fff << PR_LIMIT_SHIFT) #define PR_RPE BIT(15) #define PR_BASE_MASK 0x3fff -/* Last PR is GPR0 */ -#define PR_NUM (5 + 1) /* Offsets are from @ispi->sregs */ #define SSFSTS_CTL 0x00 @@ -90,20 +88,35 @@ #define OPMENU0 0x08 #define OPMENU1 0x0c +#define OPTYPE_READ_NO_ADDR 0 +#define OPTYPE_WRITE_NO_ADDR 1 +#define OPTYPE_READ_WITH_ADDR 2 +#define OPTYPE_WRITE_WITH_ADDR 3 + /* CPU specifics */ #define BYT_PR 0x74 #define BYT_SSFSTS_CTL 0x90 #define BYT_BCR 0xfc #define BYT_BCR_WPD BIT(0) #define BYT_FREG_NUM 5 +#define BYT_PR_NUM 5 #define LPT_PR 0x74 #define LPT_SSFSTS_CTL 0x90 #define LPT_FREG_NUM 5 +#define LPT_PR_NUM 5 #define BXT_PR 0x84 #define BXT_SSFSTS_CTL 0xa0 #define BXT_FREG_NUM 12 +#define BXT_PR_NUM 6 + +#define LVSCC 0xc4 +#define UVSCC 0xc8 +#define ERASE_OPCODE_SHIFT 8 +#define ERASE_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT) +#define ERASE_64K_OPCODE_SHIFT 16 +#define ERASE_64K_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT) #define INTEL_SPI_TIMEOUT 5000 /* ms */ #define INTEL_SPI_FIFO_SZ 64 @@ -117,8 +130,11 @@ * @pregs: Start of protection registers * @sregs: Start of software sequencer registers * @nregions: Maximum number of regions + * @pr_num: Maximum number of protected range registers * @writeable: Is the chip writeable - * @swseq: Use SW sequencer in register reads/writes + * @locked: Is SPI setting locked + * @swseq_reg: Use SW sequencer in register reads/writes + * @swseq_erase: Use SW sequencer in erase operation * @erase_64k: 64k erase supported * @opcodes: Opcodes which are supported. This are programmed by BIOS * before it locks down the controller. @@ -132,8 +148,11 @@ struct intel_spi { void __iomem *pregs; void __iomem *sregs; size_t nregions; + size_t pr_num; bool writeable; - bool swseq; + bool locked; + bool swseq_reg; + bool swseq_erase; bool erase_64k; u8 opcodes[8]; u8 preopcodes[2]; @@ -167,7 +186,7 @@ static void intel_spi_dump_regs(struct intel_spi *ispi) for (i = 0; i < ispi->nregions; i++) dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i, readl(ispi->base + FREG(i))); - for (i = 0; i < PR_NUM; i++) + for (i = 0; i < ispi->pr_num; i++) dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i, readl(ispi->pregs + PR(i))); @@ -181,8 +200,11 @@ static void intel_spi_dump_regs(struct intel_spi *ispi) if (ispi->info->type == INTEL_SPI_BYT) dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR)); + dev_dbg(ispi->dev, "LVSCC=0x%08x\n", readl(ispi->base + LVSCC)); + dev_dbg(ispi->dev, "UVSCC=0x%08x\n", readl(ispi->base + UVSCC)); + dev_dbg(ispi->dev, "Protected regions:\n"); - for (i = 0; i < PR_NUM; i++) { + for (i = 0; i < ispi->pr_num; i++) { u32 base, limit; value = readl(ispi->pregs + PR(i)); @@ -214,7 +236,9 @@ static void intel_spi_dump_regs(struct intel_spi *ispi) } dev_dbg(ispi->dev, "Using %cW sequencer for register access\n", - ispi->swseq ? 'S' : 'H'); + ispi->swseq_reg ? 'S' : 'H'); + dev_dbg(ispi->dev, "Using %cW sequencer for erase operation\n", + ispi->swseq_erase ? 'S' : 'H'); } /* Reads max INTEL_SPI_FIFO_SZ bytes from the device fifo */ @@ -278,7 +302,7 @@ static int intel_spi_wait_sw_busy(struct intel_spi *ispi) static int intel_spi_init(struct intel_spi *ispi) { - u32 opmenu0, opmenu1, val; + u32 opmenu0, opmenu1, lvscc, uvscc, val; int i; switch (ispi->info->type) { @@ -286,6 +310,8 @@ static int intel_spi_init(struct intel_spi *ispi) ispi->sregs = ispi->base + BYT_SSFSTS_CTL; ispi->pregs = ispi->base + BYT_PR; ispi->nregions = BYT_FREG_NUM; + ispi->pr_num = BYT_PR_NUM; + ispi->swseq_reg = true; if (writeable) { /* Disable write protection */ @@ -305,12 +331,15 @@ static int intel_spi_init(struct intel_spi *ispi) ispi->sregs = ispi->base + LPT_SSFSTS_CTL; ispi->pregs = ispi->base + LPT_PR; ispi->nregions = LPT_FREG_NUM; + ispi->pr_num = LPT_PR_NUM; + ispi->swseq_reg = true; break; case INTEL_SPI_BXT: ispi->sregs = ispi->base + BXT_SSFSTS_CTL; ispi->pregs = ispi->base + BXT_PR; ispi->nregions = BXT_FREG_NUM; + ispi->pr_num = BXT_PR_NUM; ispi->erase_64k = true; break; @@ -318,42 +347,64 @@ static int intel_spi_init(struct intel_spi *ispi) return -EINVAL; } - /* Disable #SMI generation */ + /* Disable #SMI generation from HW sequencer */ val = readl(ispi->base + HSFSTS_CTL); val &= ~HSFSTS_CTL_FSMIE; writel(val, ispi->base + HSFSTS_CTL); /* - * BIOS programs allowed opcodes and then locks down the register. - * So read back what opcodes it decided to support. That's the set - * we are going to support as well. + * Determine whether erase operation should use HW or SW sequencer. + * + * The HW sequencer has a predefined list of opcodes, with only the + * erase opcode being programmable in LVSCC and UVSCC registers. + * If these registers don't contain a valid erase opcode, erase + * cannot be done using HW sequencer. */ - opmenu0 = readl(ispi->sregs + OPMENU0); - opmenu1 = readl(ispi->sregs + OPMENU1); + lvscc = readl(ispi->base + LVSCC); + uvscc = readl(ispi->base + UVSCC); + if (!(lvscc & ERASE_OPCODE_MASK) || !(uvscc & ERASE_OPCODE_MASK)) + ispi->swseq_erase = true; + /* SPI controller on Intel BXT supports 64K erase opcode */ + if (ispi->info->type == INTEL_SPI_BXT && !ispi->swseq_erase) + if (!(lvscc & ERASE_64K_OPCODE_MASK) || + !(uvscc & ERASE_64K_OPCODE_MASK)) + ispi->erase_64k = false; /* * Some controllers can only do basic operations using hardware * sequencer. All other operations are supposed to be carried out - * using software sequencer. If we find that BIOS has programmed - * opcodes for the software sequencer we use that over the hardware - * sequencer. + * using software sequencer. */ - if (opmenu0 && opmenu1) { - for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) { - ispi->opcodes[i] = opmenu0 >> i * 8; - ispi->opcodes[i + 4] = opmenu1 >> i * 8; - } - - val = readl(ispi->sregs + PREOP_OPTYPE); - ispi->preopcodes[0] = val; - ispi->preopcodes[1] = val >> 8; - + if (ispi->swseq_reg) { /* Disable #SMI generation from SW sequencer */ val = readl(ispi->sregs + SSFSTS_CTL); val &= ~SSFSTS_CTL_FSMIE; writel(val, ispi->sregs + SSFSTS_CTL); + } + + /* Check controller's lock status */ + val = readl(ispi->base + HSFSTS_CTL); + ispi->locked = !!(val & HSFSTS_CTL_FLOCKDN); + + if (ispi->locked) { + /* + * BIOS programs allowed opcodes and then locks down the + * register. So read back what opcodes it decided to support. + * That's the set we are going to support as well. + */ + opmenu0 = readl(ispi->sregs + OPMENU0); + opmenu1 = readl(ispi->sregs + OPMENU1); - ispi->swseq = true; + if (opmenu0 && opmenu1) { + for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) { + ispi->opcodes[i] = opmenu0 >> i * 8; + ispi->opcodes[i + 4] = opmenu1 >> i * 8; + } + + val = readl(ispi->sregs + PREOP_OPTYPE); + ispi->preopcodes[0] = val; + ispi->preopcodes[1] = val >> 8; + } } intel_spi_dump_regs(ispi); @@ -361,18 +412,28 @@ static int intel_spi_init(struct intel_spi *ispi) return 0; } -static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode) +static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode, int optype) { int i; + int preop; - for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++) - if (ispi->opcodes[i] == opcode) - return i; - return -EINVAL; + if (ispi->locked) { + for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++) + if (ispi->opcodes[i] == opcode) + return i; + + return -EINVAL; + } + + /* The lock is off, so just use index 0 */ + writel(opcode, ispi->sregs + OPMENU0); + preop = readw(ispi->sregs + PREOP_OPTYPE); + writel(optype << 16 | preop, ispi->sregs + PREOP_OPTYPE); + + return 0; } -static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf, - int len) +static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, int len) { u32 val, status; int ret; @@ -394,6 +455,9 @@ static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf, return -EINVAL; } + if (len > INTEL_SPI_FIFO_SZ) + return -EINVAL; + val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT; val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE; val |= HSFSTS_CTL_FGO; @@ -412,27 +476,39 @@ static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf, return 0; } -static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf, - int len) +static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, int len, + int optype) { - u32 val, status; + u32 val = 0, status; + u16 preop; int ret; - ret = intel_spi_opcode_index(ispi, opcode); + ret = intel_spi_opcode_index(ispi, opcode, optype); if (ret < 0) return ret; - val = (len << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS; + if (len > INTEL_SPI_FIFO_SZ) + return -EINVAL; + + /* Only mark 'Data Cycle' bit when there is data to be transferred */ + if (len > 0) + val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS; val |= ret << SSFSTS_CTL_COP_SHIFT; val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE; val |= SSFSTS_CTL_SCGO; + preop = readw(ispi->sregs + PREOP_OPTYPE); + if (preop) { + val |= SSFSTS_CTL_ACS; + if (preop >> 8) + val |= SSFSTS_CTL_SPOP; + } writel(val, ispi->sregs + SSFSTS_CTL); ret = intel_spi_wait_sw_busy(ispi); if (ret) return ret; - status = readl(ispi->base + SSFSTS_CTL); + status = readl(ispi->sregs + SSFSTS_CTL); if (status & SSFSTS_CTL_FCERR) return -EIO; else if (status & SSFSTS_CTL_AEL) @@ -449,10 +525,11 @@ static int intel_spi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) /* Address of the first chip */ writel(0, ispi->base + FADDR); - if (ispi->swseq) - ret = intel_spi_sw_cycle(ispi, opcode, buf, len); + if (ispi->swseq_reg) + ret = intel_spi_sw_cycle(ispi, opcode, len, + OPTYPE_READ_NO_ADDR); else - ret = intel_spi_hw_cycle(ispi, opcode, buf, len); + ret = intel_spi_hw_cycle(ispi, opcode, len); if (ret) return ret; @@ -467,10 +544,15 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) /* * This is handled with atomic operation and preop code in Intel - * controller so skip it here now. + * controller so skip it here now. If the controller is not locked, + * program the opcode to the PREOP register for later use. */ - if (opcode == SPINOR_OP_WREN) + if (opcode == SPINOR_OP_WREN) { + if (!ispi->locked) + writel(opcode, ispi->sregs + PREOP_OPTYPE); + return 0; + } writel(0, ispi->base + FADDR); @@ -479,9 +561,10 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) if (ret) return ret; - if (ispi->swseq) - return intel_spi_sw_cycle(ispi, opcode, buf, len); - return intel_spi_hw_cycle(ispi, opcode, buf, len); + if (ispi->swseq_reg) + return intel_spi_sw_cycle(ispi, opcode, len, + OPTYPE_WRITE_NO_ADDR); + return intel_spi_hw_cycle(ispi, opcode, len); } static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len, @@ -561,12 +644,6 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len, val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT; val |= HSFSTS_CTL_FCYCLE_WRITE; - /* Write enable */ - if (ispi->preopcodes[1] == SPINOR_OP_WREN) - val |= SSFSTS_CTL_SPOP; - val |= SSFSTS_CTL_ACS; - writel(val, ispi->base + HSFSTS_CTL); - ret = intel_spi_write_block(ispi, write_buf, block_size); if (ret) { dev_err(ispi->dev, "failed to write block\n"); @@ -574,8 +651,8 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len, } /* Start the write now */ - val = readl(ispi->base + HSFSTS_CTL); - writel(val | HSFSTS_CTL_FGO, ispi->base + HSFSTS_CTL); + val |= HSFSTS_CTL_FGO; + writel(val, ispi->base + HSFSTS_CTL); ret = intel_spi_wait_hw_busy(ispi); if (ret) { @@ -620,6 +697,22 @@ static int intel_spi_erase(struct spi_nor *nor, loff_t offs) erase_size = SZ_4K; } + if (ispi->swseq_erase) { + while (len > 0) { + writel(offs, ispi->base + FADDR); + + ret = intel_spi_sw_cycle(ispi, nor->erase_opcode, + 0, OPTYPE_WRITE_WITH_ADDR); + if (ret) + return ret; + + offs += erase_size; + len -= erase_size; + } + + return 0; + } + while (len > 0) { writel(offs, ispi->base + FADDR); @@ -652,7 +745,7 @@ static bool intel_spi_is_protected(const struct intel_spi *ispi, { int i; - for (i = 0; i < PR_NUM; i++) { + for (i = 0; i < ispi->pr_num; i++) { u32 pr_base, pr_limit, pr_value; pr_value = readl(ispi->pregs + PR(i)); diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c index c258c7adf1c5..abe455ccd68b 100644 --- a/drivers/mtd/spi-nor/mtk-quadspi.c +++ b/drivers/mtd/spi-nor/mtk-quadspi.c @@ -404,6 +404,29 @@ static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, return ret; } +static void mt8173_nor_disable_clk(struct mt8173_nor *mt8173_nor) +{ + clk_disable_unprepare(mt8173_nor->spi_clk); + clk_disable_unprepare(mt8173_nor->nor_clk); +} + +static int mt8173_nor_enable_clk(struct mt8173_nor *mt8173_nor) +{ + int ret; + + ret = clk_prepare_enable(mt8173_nor->spi_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(mt8173_nor->nor_clk); + if (ret) { + clk_disable_unprepare(mt8173_nor->spi_clk); + return ret; + } + + return 0; +} + static int mtk_nor_init(struct mt8173_nor *mt8173_nor, struct device_node *flash_node) { @@ -468,15 +491,11 @@ static int mtk_nor_drv_probe(struct platform_device *pdev) return PTR_ERR(mt8173_nor->nor_clk); mt8173_nor->dev = &pdev->dev; - ret = clk_prepare_enable(mt8173_nor->spi_clk); + + ret = mt8173_nor_enable_clk(mt8173_nor); if (ret) return ret; - ret = clk_prepare_enable(mt8173_nor->nor_clk); - if (ret) { - clk_disable_unprepare(mt8173_nor->spi_clk); - return ret; - } /* only support one attached flash */ flash_np = of_get_next_available_child(pdev->dev.of_node, NULL); if (!flash_np) { @@ -487,10 +506,9 @@ static int mtk_nor_drv_probe(struct platform_device *pdev) ret = mtk_nor_init(mt8173_nor, flash_np); nor_free: - if (ret) { - clk_disable_unprepare(mt8173_nor->spi_clk); - clk_disable_unprepare(mt8173_nor->nor_clk); - } + if (ret) + mt8173_nor_disable_clk(mt8173_nor); + return ret; } @@ -498,11 +516,38 @@ static int mtk_nor_drv_remove(struct platform_device *pdev) { struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev); - clk_disable_unprepare(mt8173_nor->spi_clk); - clk_disable_unprepare(mt8173_nor->nor_clk); + mt8173_nor_disable_clk(mt8173_nor); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mtk_nor_suspend(struct device *dev) +{ + struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev); + + mt8173_nor_disable_clk(mt8173_nor); + return 0; } +static int mtk_nor_resume(struct device *dev) +{ + struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev); + + return mt8173_nor_enable_clk(mt8173_nor); +} + +static const struct dev_pm_ops mtk_nor_dev_pm_ops = { + .suspend = mtk_nor_suspend, + .resume = mtk_nor_resume, +}; + +#define MTK_NOR_DEV_PM_OPS (&mtk_nor_dev_pm_ops) +#else +#define MTK_NOR_DEV_PM_OPS NULL +#endif + static const struct of_device_id mtk_nor_of_ids[] = { { .compatible = "mediatek,mt8173-nor"}, { /* sentinel */ } @@ -514,6 +559,7 @@ static struct platform_driver mtk_nor_driver = { .remove = mtk_nor_drv_remove, .driver = { .name = "mtk-nor", + .pm = MTK_NOR_DEV_PM_OPS, .of_match_table = mtk_nor_of_ids, }, }; diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 19c000722cbc..bc266f70a15b 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -89,6 +89,8 @@ struct flash_info { #define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */ #define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */ #define USE_CLSR BIT(14) /* use CLSR command */ + + int (*quad_enable)(struct spi_nor *nor); }; #define JEDEC_MFR(info) ((info)->id[0]) @@ -870,6 +872,8 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) return ret; } +static int macronix_quad_enable(struct spi_nor *nor); + /* Used when the "_ext_id" is two bytes at most */ #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ .id = { \ @@ -964,6 +968,7 @@ static const struct flash_info spi_nor_ids[] = { { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_LOCK) }, /* Everspin */ + { "mr25h128", CAT25_INFO( 16 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, { "mr25h40", CAT25_INFO(512 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, @@ -983,6 +988,11 @@ static const struct flash_info spi_nor_ids[] = { SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, { + "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, + { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) @@ -997,6 +1007,12 @@ static const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { + "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + .quad_enable = macronix_quad_enable, + }, /* Intel/Numonyx -- xxxs33b */ { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, @@ -1024,7 +1040,7 @@ static const struct flash_info spi_nor_ids[] = { { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) }, { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, - { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, @@ -1137,6 +1153,11 @@ static const struct flash_info spi_nor_ids[] = { { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) }, { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) }, { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, + { + "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) }, { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) }, @@ -2288,8 +2309,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor, /* Check the SFDP header version. */ if (le32_to_cpu(header.signature) != SFDP_SIGNATURE || - header.major != SFDP_JESD216_MAJOR || - header.minor < SFDP_JESD216_MINOR) + header.major != SFDP_JESD216_MAJOR) return -EINVAL; /* @@ -2427,6 +2447,15 @@ static int spi_nor_init_params(struct spi_nor *nor, params->quad_enable = spansion_quad_enable; break; } + + /* + * Some manufacturer like GigaDevice may use different + * bit to set QE on different memories, so the MFR can't + * indicate the quad_enable method for this case, we need + * set it in flash info list. + */ + if (info->quad_enable) + params->quad_enable = info->quad_enable; } /* Override the parameters with data read from SFDP tables. */ @@ -2630,17 +2659,60 @@ static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info, /* Enable Quad I/O if needed. */ enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 || spi_nor_get_protocol_width(nor->write_proto) == 4); - if (enable_quad_io && params->quad_enable) { - err = params->quad_enable(nor); + if (enable_quad_io && params->quad_enable) + nor->quad_enable = params->quad_enable; + else + nor->quad_enable = NULL; + + return 0; +} + +static int spi_nor_init(struct spi_nor *nor) +{ + int err; + + /* + * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up + * with the software protection bits set + */ + if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL || + JEDEC_MFR(nor->info) == SNOR_MFR_INTEL || + JEDEC_MFR(nor->info) == SNOR_MFR_SST || + nor->info->flags & SPI_NOR_HAS_LOCK) { + write_enable(nor); + write_sr(nor, 0); + spi_nor_wait_till_ready(nor); + } + + if (nor->quad_enable) { + err = nor->quad_enable(nor); if (err) { dev_err(nor->dev, "quad mode not supported\n"); return err; } } + if ((nor->addr_width == 4) && + (JEDEC_MFR(nor->info) != SNOR_MFR_SPANSION) && + !(nor->info->flags & SPI_NOR_4B_OPCODES)) + set_4byte(nor, nor->info, 1); + return 0; } +/* mtd resume handler */ +static void spi_nor_resume(struct mtd_info *mtd) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + struct device *dev = nor->dev; + int ret; + + /* re-initialize the nor chip */ + ret = spi_nor_init(nor); + if (ret) + dev_err(dev, "resume() failed\n"); +} + int spi_nor_scan(struct spi_nor *nor, const char *name, const struct spi_nor_hwcaps *hwcaps) { @@ -2708,20 +2780,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, if (ret) return ret; - /* - * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up - * with the software protection bits set - */ - - if (JEDEC_MFR(info) == SNOR_MFR_ATMEL || - JEDEC_MFR(info) == SNOR_MFR_INTEL || - JEDEC_MFR(info) == SNOR_MFR_SST || - info->flags & SPI_NOR_HAS_LOCK) { - write_enable(nor); - write_sr(nor, 0); - spi_nor_wait_till_ready(nor); - } - if (!mtd->name) mtd->name = dev_name(dev); mtd->priv = nor; @@ -2731,6 +2789,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, mtd->size = params.size; mtd->_erase = spi_nor_erase; mtd->_read = spi_nor_read; + mtd->_resume = spi_nor_resume; /* NOR protection support for STmicro/Micron chips and similar */ if (JEDEC_MFR(info) == SNOR_MFR_MICRON || @@ -2804,8 +2863,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, if (JEDEC_MFR(info) == SNOR_MFR_SPANSION || info->flags & SPI_NOR_4B_OPCODES) spi_nor_set_4byte_opcodes(nor, info); - else - set_4byte(nor, info, 1); } else { nor->addr_width = 3; } @@ -2822,6 +2879,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, return ret; } + /* Send all the required SPI flash commands to initialize device */ + nor->info = info; + ret = spi_nor_init(nor); + if (ret) + return ret; + dev_info(dev, "%s (%lld Kbytes)\n", info->name, (long long)mtd->size >> 10); diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c index 86c0931543c5..b3c7f6addba7 100644 --- a/drivers/mtd/spi-nor/stm32-quadspi.c +++ b/drivers/mtd/spi-nor/stm32-quadspi.c @@ -1,9 +1,22 @@ /* - * stm32_quadspi.c + * Driver for stm32 quadspi controller * - * Copyright (C) 2017, Ludovic Barre + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved + * Author(s): Ludovic Barre author <ludovic.barre@st.com>. * - * License terms: GNU General Public License (GPL), version 2 + * License terms: GPL V2.0. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License along with + * This program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/clk.h> #include <linux/errno.h> @@ -113,6 +126,7 @@ #define STM32_MAX_MMAP_SZ SZ_256M #define STM32_MAX_NORCHIP 2 +#define STM32_QSPI_FIFO_SZ 32 #define STM32_QSPI_FIFO_TIMEOUT_US 30000 #define STM32_QSPI_BUSY_TIMEOUT_US 100000 @@ -124,6 +138,7 @@ struct stm32_qspi_flash { u32 presc; u32 read_mode; bool registered; + u32 prefetch_limit; }; struct stm32_qspi { @@ -240,12 +255,12 @@ static int stm32_qspi_tx_poll(struct stm32_qspi *qspi, STM32_QSPI_FIFO_TIMEOUT_US); if (ret) { dev_err(qspi->dev, "fifo timeout (stat:%#x)\n", sr); - break; + return ret; } tx_fifo(buf++, qspi->io_base + QUADSPI_DR); } - return ret; + return 0; } static int stm32_qspi_tx_mm(struct stm32_qspi *qspi, @@ -272,6 +287,7 @@ static int stm32_qspi_send(struct stm32_qspi_flash *flash, { struct stm32_qspi *qspi = flash->qspi; u32 ccr, dcr, cr; + u32 last_byte; int err; err = stm32_qspi_wait_nobusy(qspi); @@ -314,6 +330,10 @@ static int stm32_qspi_send(struct stm32_qspi_flash *flash, if (err) goto abort; writel_relaxed(FCR_CTCF, qspi->io_base + QUADSPI_FCR); + } else { + last_byte = cmd->addr + cmd->len; + if (last_byte > flash->prefetch_limit) + goto abort; } return err; @@ -322,7 +342,9 @@ abort: cr = readl_relaxed(qspi->io_base + QUADSPI_CR) | CR_ABORT; writel_relaxed(cr, qspi->io_base + QUADSPI_CR); - dev_err(qspi->dev, "%s abort err:%d\n", __func__, err); + if (err) + dev_err(qspi->dev, "%s abort err:%d\n", __func__, err); + return err; } @@ -550,6 +572,7 @@ static int stm32_qspi_flash_setup(struct stm32_qspi *qspi, } flash->fsize = FSIZE_VAL(mtd->size); + flash->prefetch_limit = mtd->size - STM32_QSPI_FIFO_SZ; flash->read_mode = CCR_FMODE_MM; if (mtd->size > qspi->mm_size) diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 6cd0f6b7658b..cd55bf14ad51 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -267,7 +267,7 @@ struct mtd_info { */ unsigned int bitflip_threshold; - // Kernel-only stuff starts here. + /* Kernel-only stuff starts here. */ const char *name; int index; @@ -297,10 +297,6 @@ struct mtd_info { int (*_point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys); int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len); - unsigned long (*_get_unmapped_area) (struct mtd_info *mtd, - unsigned long len, - unsigned long offset, - unsigned long flags); int (*_read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); int (*_write) (struct mtd_info *mtd, loff_t to, size_t len, diff --git a/include/linux/mtd/nand-gpio.h b/include/linux/mtd/nand-gpio.h index fdef72d6e198..7ab51bc4a380 100644 --- a/include/linux/mtd/nand-gpio.h +++ b/include/linux/mtd/nand-gpio.h @@ -5,11 +5,6 @@ #include <linux/mtd/rawnand.h> struct gpio_nand_platdata { - int gpio_nce; - int gpio_nwp; - int gpio_cle; - int gpio_ale; - int gpio_rdy; void (*adjust_parts)(struct gpio_nand_platdata *, size_t); struct mtd_partition *parts; unsigned int num_parts; diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index 2b05f4273bab..749bb08c4772 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -177,6 +177,9 @@ enum nand_ecc_algo { */ #define NAND_NEED_SCRAMBLING 0x00002000 +/* Device needs 3rd row address cycle */ +#define NAND_ROW_ADDR_3 0x00004000 + /* Options valid for Samsung large page devices */ #define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 1f0a7fc7772f..d0c66a0975cf 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -232,10 +232,17 @@ enum spi_nor_option_flags { }; /** + * struct flash_info - Forward declaration of a structure used internally by + * spi_nor_scan() + */ +struct flash_info; + +/** * struct spi_nor - Structure for defining a the SPI NOR layer * @mtd: point to a mtd_info structure * @lock: the lock for the read/write/erase/lock/unlock operations * @dev: point to a spi device, or a spi nor controller device. + * @info: spi-nor part JDEC MFR id and other info * @page_size: the page size of the SPI NOR * @addr_width: number of address bytes * @erase_opcode: the opcode for erasing a sector @@ -262,6 +269,7 @@ enum spi_nor_option_flags { * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is + * @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode * completely locked * @priv: the private data */ @@ -269,6 +277,7 @@ struct spi_nor { struct mtd_info mtd; struct mutex lock; struct device *dev; + const struct flash_info *info; u32 page_size; u8 addr_width; u8 erase_opcode; @@ -296,6 +305,7 @@ struct spi_nor { int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len); int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len); + int (*quad_enable)(struct spi_nor *nor); void *priv; }; diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 25e267f1970c..619df2431e75 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -64,21 +64,4 @@ struct gpmc_nand_regs { void __iomem *gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER]; void __iomem *gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER]; }; - -struct omap_nand_platform_data { - int cs; - struct mtd_partition *parts; - int nr_parts; - bool flash_bbt; - enum nand_io xfer_type; - int devsize; - enum omap_ecc ecc_opt; - - struct device_node *elm_of_node; - - /* deprecated */ - struct gpmc_nand_regs reg; - struct device_node *of_node; - bool dev_ready; -}; #endif diff --git a/lib/Kconfig b/lib/Kconfig index 368972f0db78..c5e84fbcb30b 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -46,10 +46,6 @@ config GENERIC_IOMAP bool select GENERIC_PCI_IOMAP -config GENERIC_IO - bool - default n - config STMP_DEVICE bool |