Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "A rather small update for the time(r) subsystem:

   - A new clocksource driver IMX-TPM

   - Minor fixes to the alarmtimer facility

   - Device tree cleanups for Renesas drivers

   - A new kselftest and fixes for the timer related tests

   - Conversion of the clocksource drivers to use %pOF

   - Use the proper helpers to access rlimits in the posix-cpu-timer
     code"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Ensure RTC module is not unloaded
  clocksource: Convert to using %pOF instead of full_name
  clocksource/drivers/bcm2835: Remove message for a memory allocation failure
  devicetree: bindings: Remove deprecated properties
  devicetree: bindings: Remove unused 32-bit CMT bindings
  devicetree: bindings: Deprecate property, update example
  devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
  devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
  devicetree: bindings: Remove sh7372 CMT binding
  clocksource/drivers/imx-tpm: Add imx tpm timer support
  dt-bindings: timer: Add nxp tpm timer binding doc
  posix-cpu-timers: Use dedicated helper to access rlimit values
  alarmtimer: Fix unavailable wake-up source in sysfs
  timekeeping: Use proper timekeeper for debug code
  kselftests: timers: set-timer-lat: Add one-shot timer test cases
  kselftests: timers: set-timer-lat: Tweak reporting when timer fires early
  kselftests: timers: freq-step: Fix build warning
  kselftests: timers: freq-step: Define ADJ_SETOFFSET if device has older kernel headers

15 files changed, 439 insertions, 83 deletions

diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
new file mode 100644
index 000000000000..b4aa7ddb5b13
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
@@ -0,0 +1,28 @@
+NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+The Timer/PWM Module (TPM) supports input capture, output compare,
+and the generation of PWM signals to control electric motor and power
+management applications. The counter, compare and capture registers
+are clocked by an asynchronous clock that can remain enabled in low
+power modes. TPM can support global counter bus where one TPM drives
+the counter bus for the others, provided bit width is the same.
+
+Required properties:
+
+- compatible :	should be "fsl,imx7ulp-tpm"
+- reg :		Specifies base physical address and size of the register sets
+		for the clock event device and clock source device.
+- interrupts :	Should be the clock event device interrupt.
+- clocks :	The clocks provided by the SoC to drive the timer, must contain
+		an entry for each entry in clock-names.
+- clock-names : Must include the following entries: "igp" and "per".
+
+Example:
+tpm5: tpm@40260000 {
+	compatible = "fsl,imx7ulp-tpm";
+	reg = <0x40260000 0x1000>;
+	interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
+		 <&clks IMX7ULP_CLK_LPTPM5>;
+	clock-names = "ipg", "per";
+};
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
index 1a05c1b243c1..6ca6b9e582a0 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -12,46 +12,29 @@ datasheets.
 Required Properties:
 
   - compatible: must contain one or more of the following:
-    - "renesas,cmt-32-r8a7740" for the r8a7740 32-bit CMT
-		(CMT0)
-    - "renesas,cmt-32-sh7372" for the sh7372 32-bit CMT
-		(CMT0)
-    - "renesas,cmt-32-sh73a0" for the sh73a0 32-bit CMT
-		(CMT0)
-    - "renesas,cmt-32" for all 32-bit CMT without fast clock support
-		(CMT0 on sh7372, sh73a0 and r8a7740)
-		This is a fallback for the above renesas,cmt-32-* entries.
-
-    - "renesas,cmt-32-fast-r8a7740" for the r8a7740 32-bit CMT with fast
-		clock support (CMT[234])
-    - "renesas,cmt-32-fast-sh7372" for the sh7372 32-bit CMT with fast
-		clock support (CMT[234])
-    - "renesas,cmt-32-fast-sh73a0" for the sh73A0 32-bit CMT with fast
-		clock support (CMT[234])
-    - "renesas,cmt-32-fast" for all 32-bit CMT with fast clock support
-		(CMT[234] on sh7372, sh73a0 and r8a7740)
-		This is a fallback for the above renesas,cmt-32-fast-* entries.
-
-    - "renesas,cmt-48-sh7372" for the sh7372 48-bit CMT
-		(CMT1)
     - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT
 		(CMT1)
     - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT
 		(CMT1)
     - "renesas,cmt-48" for all non-second generation 48-bit CMT
-		(CMT1 on sh7372, sh73a0 and r8a7740)
+		(CMT1 on sh73a0 and r8a7740)
 		This is a fallback for the above renesas,cmt-48-* entries.
 
-    - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT
-		(CMT[01])
-    - "renesas,cmt-48-r8a7790" for the r8a7790 48-bit CMT
-		(CMT[01])
-    - "renesas,cmt-48-r8a7791" for the r8a7791 48-bit CMT
-		(CMT[01])
-    - "renesas,cmt-48-gen2" for all second generation 48-bit CMT
-		(CMT[01] on r8a73a4, r8a7790 and r8a7791)
-		This is a fallback for the renesas,cmt-48-r8a73a4,
-		renesas,cmt-48-r8a7790 and renesas,cmt-48-r8a7791 entries.
+    - "renesas,cmt0-r8a73a4" for the 32-bit CMT0 device included in r8a73a4.
+    - "renesas,cmt1-r8a73a4" for the 48-bit CMT1 device included in r8a73a4.
+    - "renesas,cmt0-r8a7790" for the 32-bit CMT0 device included in r8a7790.
+    - "renesas,cmt1-r8a7790" for the 48-bit CMT1 device included in r8a7790.
+    - "renesas,cmt0-r8a7791" for the 32-bit CMT0 device included in r8a7791.
+    - "renesas,cmt1-r8a7791" for the 48-bit CMT1 device included in r8a7791.
+    - "renesas,cmt0-r8a7793" for the 32-bit CMT0 device included in r8a7793.
+    - "renesas,cmt1-r8a7793" for the 48-bit CMT1 device included in r8a7793.
+    - "renesas,cmt0-r8a7794" for the 32-bit CMT0 device included in r8a7794.
+    - "renesas,cmt1-r8a7794" for the 48-bit CMT1 device included in r8a7794.
+
+    - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2.
+    - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2.
+		These are fallbacks for r8a73a4 and all the R-Car Gen2
+		entries	listed above.
 
   - reg: base address and length of the registers block for the timer module.
   - interrupts: interrupt-specifier for the timer, one per channel.
@@ -59,21 +42,29 @@ Required Properties:
     in clock-names.
   - clock-names: must contain "fck" for the functional clock.
 
-  - renesas,channels-mask: bitmask of the available channels.
 
-
-Example: R8A7790 (R-Car H2) CMT0 node
-
-	CMT0 on R8A7790 implements hardware channels 5 and 6 only and names
-	them channels 0 and 1 in the documentation.
+Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
 
 	cmt0: timer@ffca0000 {
-		compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
+		compatible = "renesas,cmt0-r8a7790", "renesas,rcar-gen2-cmt0";
 		reg = <0 0xffca0000 0 0x1004>;
 		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 142 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
 		clock-names = "fck";
+	};
 
-		renesas,channels-mask = <0x60>;
+	cmt1: timer@e6130000 {
+		compatible = "renesas,cmt1-r8a7790", "renesas,rcar-gen2-cmt1";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
+		clock-names = "fck";
 	};
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 54a67f8a28eb..cc6062049170 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -598,6 +598,14 @@ config CLKSRC_IMX_GPT
 	depends on ARM && CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 
+config CLKSRC_IMX_TPM
+	bool "Clocksource using i.MX TPM" if COMPILE_TEST
+	depends on ARM && CLKDEV_LOOKUP && GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enable this option to use IMX Timer/PWM Module (TPM) timer as
+	  clocksource.
+
 config CLKSRC_ST_LPC
 	bool "Low power clocksource found in the LPC" if COMPILE_TEST
 	select TIMER_OF if OF
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 6df949402dfc..dbc1ad14515e 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_CLKSRC_VERSATILE)		+= versatile.o
 obj-$(CONFIG_CLKSRC_MIPS_GIC)		+= mips-gic-timer.o
 obj-$(CONFIG_CLKSRC_TANGO_XTAL)		+= tango_xtal.o
 obj-$(CONFIG_CLKSRC_IMX_GPT)		+= timer-imx-gpt.o
+obj-$(CONFIG_CLKSRC_IMX_TPM)		+= timer-imx-tpm.o
 obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index 82828d3a4739..39e489a96ad7 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -114,7 +114,6 @@ static int __init bcm2835_timer_init(struct device_node *node)
 
 	timer = kzalloc(sizeof(*timer), GFP_KERNEL);
 	if (!timer) {
-		pr_err("Can't allocate timer struct\n");
 		ret = -ENOMEM;
 		goto err_iounmap;
 	}
diff --git a/drivers/clocksource/tango_xtal.c b/drivers/clocksource/tango_xtal.c
index c4e1c2e6046f..6a8d9838ce33 100644
--- a/drivers/clocksource/tango_xtal.c
+++ b/drivers/clocksource/tango_xtal.c
@@ -26,13 +26,13 @@ static int __init tango_clocksource_init(struct device_node *np)
 
 	xtal_in_cnt = of_iomap(np, 0);
 	if (xtal_in_cnt == NULL) {
-		pr_err("%s: invalid address\n", np->full_name);
+		pr_err("%pOF: invalid address\n", np);
 		return -ENXIO;
 	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
-		pr_err("%s: invalid clock\n", np->full_name);
+		pr_err("%pOF: invalid clock\n", np);
 		return PTR_ERR(clk);
 	}
 
@@ -43,7 +43,7 @@ static int __init tango_clocksource_init(struct device_node *np)
 	ret = clocksource_mmio_init(xtal_in_cnt, "tango-xtal", xtal_freq, 350,
 				    32, clocksource_mmio_readl_up);
 	if (ret) {
-		pr_err("%s: registration failed\n", np->full_name);
+		pr_err("%pOF: registration failed\n", np);
 		return ret;
 	}
 
diff --git a/drivers/clocksource/timer-imx-tpm.c b/drivers/clocksource/timer-imx-tpm.c
new file mode 100644
index 000000000000..21bffdcb2f20
--- /dev/null
+++ b/drivers/clocksource/timer-imx-tpm.c
@@ -0,0 +1,239 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#define TPM_SC				0x10
+#define TPM_SC_CMOD_INC_PER_CNT		(0x1 << 3)
+#define TPM_SC_CMOD_DIV_DEFAULT		0x3
+#define TPM_CNT				0x14
+#define TPM_MOD				0x18
+#define TPM_STATUS			0x1c
+#define TPM_STATUS_CH0F			BIT(0)
+#define TPM_C0SC			0x20
+#define TPM_C0SC_CHIE			BIT(6)
+#define TPM_C0SC_MODE_SHIFT		2
+#define TPM_C0SC_MODE_MASK		0x3c
+#define TPM_C0SC_MODE_SW_COMPARE	0x4
+#define TPM_C0V				0x24
+
+static void __iomem *timer_base;
+static struct clock_event_device clockevent_tpm;
+
+static inline void tpm_timer_disable(void)
+{
+	unsigned int val;
+
+	/* channel disable */
+	val = readl(timer_base + TPM_C0SC);
+	val &= ~(TPM_C0SC_MODE_MASK | TPM_C0SC_CHIE);
+	writel(val, timer_base + TPM_C0SC);
+}
+
+static inline void tpm_timer_enable(void)
+{
+	unsigned int val;
+
+	/* channel enabled in sw compare mode */
+	val = readl(timer_base + TPM_C0SC);
+	val |= (TPM_C0SC_MODE_SW_COMPARE << TPM_C0SC_MODE_SHIFT) |
+	       TPM_C0SC_CHIE;
+	writel(val, timer_base + TPM_C0SC);
+}
+
+static inline void tpm_irq_acknowledge(void)
+{
+	writel(TPM_STATUS_CH0F, timer_base + TPM_STATUS);
+}
+
+static struct delay_timer tpm_delay_timer;
+
+static inline unsigned long tpm_read_counter(void)
+{
+	return readl(timer_base + TPM_CNT);
+}
+
+static unsigned long tpm_read_current_timer(void)
+{
+	return tpm_read_counter();
+}
+
+static u64 notrace tpm_read_sched_clock(void)
+{
+	return tpm_read_counter();
+}
+
+static int __init tpm_clocksource_init(unsigned long rate)
+{
+	tpm_delay_timer.read_current_timer = &tpm_read_current_timer;
+	tpm_delay_timer.freq = rate;
+	register_current_timer_delay(&tpm_delay_timer);
+
+	sched_clock_register(tpm_read_sched_clock, 32, rate);
+
+	return clocksource_mmio_init(timer_base + TPM_CNT, "imx-tpm",
+				     rate, 200, 32, clocksource_mmio_readl_up);
+}
+
+static int tpm_set_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	unsigned long next, now;
+
+	next = tpm_read_counter();
+	next += delta;
+	writel(next, timer_base + TPM_C0V);
+	now = tpm_read_counter();
+
+	/*
+	 * NOTE: We observed in a very small probability, the bus fabric
+	 * contention between GPU and A7 may results a few cycles delay
+	 * of writing CNT registers which may cause the min_delta event got
+	 * missed, so we need add a ETIME check here in case it happened.
+	 */
+	return (int)((next - now) <= 0) ? -ETIME : 0;
+}
+
+static int tpm_set_state_oneshot(struct clock_event_device *evt)
+{
+	tpm_timer_enable();
+
+	return 0;
+}
+
+static int tpm_set_state_shutdown(struct clock_event_device *evt)
+{
+	tpm_timer_disable();
+
+	return 0;
+}
+
+static irqreturn_t tpm_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	tpm_irq_acknowledge();
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct clock_event_device clockevent_tpm = {
+	.name			= "i.MX7ULP TPM Timer",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_oneshot	= tpm_set_state_oneshot,
+	.set_next_event		= tpm_set_next_event,
+	.set_state_shutdown	= tpm_set_state_shutdown,
+	.rating			= 200,
+};
+
+static int __init tpm_clockevent_init(unsigned long rate, int irq)
+{
+	int ret;
+
+	ret = request_irq(irq, tpm_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			  "i.MX7ULP TPM Timer", &clockevent_tpm);
+
+	clockevent_tpm.cpumask = cpumask_of(0);
+	clockevent_tpm.irq = irq;
+	clockevents_config_and_register(&clockevent_tpm,
+					rate, 300, 0xfffffffe);
+
+	return ret;
+}
+
+static int __init tpm_timer_init(struct device_node *np)
+{
+	struct clk *ipg, *per;
+	int irq, ret;
+	u32 rate;
+
+	timer_base = of_iomap(np, 0);
+	if (!timer_base) {
+		pr_err("tpm: failed to get base address\n");
+		return -ENXIO;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		pr_err("tpm: failed to get irq\n");
+		ret = -ENOENT;
+		goto err_iomap;
+	}
+
+	ipg = of_clk_get_by_name(np, "ipg");
+	per = of_clk_get_by_name(np, "per");
+	if (IS_ERR(ipg) || IS_ERR(per)) {
+		pr_err("tpm: failed to get igp or per clk\n");
+		ret = -ENODEV;
+		goto err_clk_get;
+	}
+
+	/* enable clk before accessing registers */
+	ret = clk_prepare_enable(ipg);
+	if (ret) {
+		pr_err("tpm: ipg clock enable failed (%d)\n", ret);
+		goto err_clk_get;
+	}
+
+	ret = clk_prepare_enable(per);
+	if (ret) {
+		pr_err("tpm: per clock enable failed (%d)\n", ret);
+		goto err_per_clk_enable;
+	}
+
+	/*
+	 * Initialize tpm module to a known state
+	 * 1) Counter disabled
+	 * 2) TPM counter operates in up counting mode
+	 * 3) Timer Overflow Interrupt disabled
+	 * 4) Channel0 disabled
+	 * 5) DMA transfers disabled
+	 */
+	writel(0, timer_base + TPM_SC);
+	writel(0, timer_base + TPM_CNT);
+	writel(0, timer_base + TPM_C0SC);
+
+	/* increase per cnt, div 8 by default */
+	writel(TPM_SC_CMOD_INC_PER_CNT | TPM_SC_CMOD_DIV_DEFAULT,
+		     timer_base + TPM_SC);
+
+	/* set MOD register to maximum for free running mode */
+	writel(0xffffffff, timer_base + TPM_MOD);
+
+	rate = clk_get_rate(per) >> 3;
+	ret = tpm_clocksource_init(rate);
+	if (ret)
+		goto err_per_clk_enable;
+
+	ret = tpm_clockevent_init(rate, irq);
+	if (ret)
+		goto err_per_clk_enable;
+
+	return 0;
+
+err_per_clk_enable:
+	clk_disable_unprepare(ipg);
+err_clk_get:
+	clk_put(per);
+	clk_put(ipg);
+err_iomap:
+	iounmap(timer_base);
+	return ret;
+}
+TIMER_OF_DECLARE(imx7ulp, "fsl,imx7ulp-tpm", tpm_timer_init);
diff --git a/drivers/clocksource/timer-of.c b/drivers/clocksource/timer-of.c
index 4d7aef9d9c15..c79122d8e10d 100644
--- a/drivers/clocksource/timer-of.c
+++ b/drivers/clocksource/timer-of.c
@@ -52,7 +52,7 @@ static __init int timer_irq_init(struct device_node *np,
 		of_irq->irq = irq_of_parse_and_map(np, of_irq->index);
 	}
 	if (!of_irq->irq) {
-		pr_err("Failed to map interrupt for %s\n", np->full_name);
+		pr_err("Failed to map interrupt for %pOF\n", np);
 		return -EINVAL;
 	}
 
@@ -63,8 +63,7 @@ static __init int timer_irq_init(struct device_node *np,
 			    of_irq->flags ? of_irq->flags : IRQF_TIMER,
 			    np->full_name, clkevt);
 	if (ret) {
-		pr_err("Failed to request irq %d for %s\n", of_irq->irq,
-		       np->full_name);
+		pr_err("Failed to request irq %d for %pOF\n", of_irq->irq, np);
 		return ret;
 	}
 
@@ -88,20 +87,20 @@ static __init int timer_clk_init(struct device_node *np,
 	of_clk->clk = of_clk->name ? of_clk_get_by_name(np, of_clk->name) :
 		of_clk_get(np, of_clk->index);
 	if (IS_ERR(of_clk->clk)) {
-		pr_err("Failed to get clock for %s\n", np->full_name);
+		pr_err("Failed to get clock for %pOF\n", np);
 		return PTR_ERR(of_clk->clk);
 	}
 
 	ret = clk_prepare_enable(of_clk->clk);
 	if (ret) {
-		pr_err("Failed for enable clock for %s\n", np->full_name);
+		pr_err("Failed for enable clock for %pOF\n", np);
 		goto out_clk_put;
 	}
 
 	of_clk->rate = clk_get_rate(of_clk->clk);
 	if (!of_clk->rate) {
 		ret = -EINVAL;
-		pr_err("Failed to get clock rate for %s\n", np->full_name);
+		pr_err("Failed to get clock rate for %pOF\n", np);
 		goto out_clk_disable;
 	}
 
diff --git a/drivers/clocksource/timer-probe.c b/drivers/clocksource/timer-probe.c
index da81e5de74fe..028075720334 100644
--- a/drivers/clocksource/timer-probe.c
+++ b/drivers/clocksource/timer-probe.c
@@ -40,8 +40,7 @@ void __init timer_probe(void)
 
 		ret = init_func_ret(np);
 		if (ret) {
-			pr_err("Failed to initialize '%s': %d\n",
-			       of_node_full_name(np), ret);
+			pr_err("Failed to initialize '%pOF': %d\n", np, ret);
 			continue;
 		}
 
diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
index 174d1243ea93..8f2423789ba9 100644
--- a/drivers/clocksource/timer-stm32.c
+++ b/drivers/clocksource/timer-stm32.c
@@ -138,7 +138,7 @@ static int __init stm32_clockevent_init(struct device_node *np)
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		ret = -EINVAL;
-		pr_err("%s: failed to get irq.\n", np->full_name);
+		pr_err("%pOF: failed to get irq.\n", np);
 		goto err_get_irq;
 	}
 
@@ -168,12 +168,12 @@ static int __init stm32_clockevent_init(struct device_node *np)
 	ret = request_irq(irq, stm32_clock_event_handler, IRQF_TIMER,
 			"stm32 clockevent", data);
 	if (ret) {
-		pr_err("%s: failed to request irq.\n", np->full_name);
+		pr_err("%pOF: failed to request irq.\n", np);
 		goto err_get_irq;
 	}
 
-	pr_info("%s: STM32 clockevent driver initialized (%d bits)\n",
-			np->full_name, bits);
+	pr_info("%pOF: STM32 clockevent driver initialized (%d bits)\n",
+			np, bits);
 
 	return ret;
 
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index 0b8ff7d257ea..ec09ce9a6012 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -28,6 +28,7 @@
 #include <linux/workqueue.h>
 #include <linux/freezer.h>
 #include <linux/compat.h>
+#include <linux/module.h>
 
 #include "posix-timers.h"
 
@@ -56,9 +57,9 @@ static ktime_t freezer_delta;
 static DEFINE_SPINLOCK(freezer_delta_lock);
 #endif
 
+#ifdef CONFIG_RTC_CLASS
 static struct wakeup_source *ws;
 
-#ifdef CONFIG_RTC_CLASS
 /* rtc timer and device for setting alarm wakeups at suspend */
 static struct rtc_timer		rtctimer;
 static struct rtc_device	*rtcdev;
@@ -89,6 +90,7 @@ static int alarmtimer_rtc_add_device(struct device *dev,
 {
 	unsigned long flags;
 	struct rtc_device *rtc = to_rtc_device(dev);
+	struct wakeup_source *__ws;
 
 	if (rtcdev)
 		return -EBUSY;
@@ -98,13 +100,25 @@ static int alarmtimer_rtc_add_device(struct device *dev,
 	if (!device_may_wakeup(rtc->dev.parent))
 		return -1;
 
+	__ws = wakeup_source_register("alarmtimer");
+
 	spin_lock_irqsave(&rtcdev_lock, flags);
 	if (!rtcdev) {
+		if (!try_module_get(rtc->owner)) {
+			spin_unlock_irqrestore(&rtcdev_lock, flags);
+			return -1;
+		}
+
 		rtcdev = rtc;
 		/* hold a reference so it doesn't go away */
 		get_device(dev);
+		ws = __ws;
+		__ws = NULL;
 	}
 	spin_unlock_irqrestore(&rtcdev_lock, flags);
+
+	wakeup_source_unregister(__ws);
+
 	return 0;
 }
 
@@ -860,7 +874,6 @@ static int __init alarmtimer_init(void)
 		error = PTR_ERR(pdev);
 		goto out_drv;
 	}
-	ws = wakeup_source_register("alarmtimer");
 	return 0;
 
 out_drv:
diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c
index a3bd5dbe0dc4..8585ad6e472a 100644
--- a/kernel/time/posix-cpu-timers.c
+++ b/kernel/time/posix-cpu-timers.c
@@ -799,7 +799,6 @@ static void check_thread_timers(struct task_struct *tsk,
 				struct list_head *firing)
 {
 	struct list_head *timers = tsk->cpu_timers;
-	struct signal_struct *const sig = tsk->signal;
 	struct task_cputime *tsk_expires = &tsk->cputime_expires;
 	u64 expires;
 	unsigned long soft;
@@ -823,10 +822,9 @@ static void check_thread_timers(struct task_struct *tsk,
 	/*
 	 * Check for the special case thread timers.
 	 */
-	soft = READ_ONCE(sig->rlim[RLIMIT_RTTIME].rlim_cur);
+	soft = task_rlimit(tsk, RLIMIT_RTTIME);
 	if (soft != RLIM_INFINITY) {
-		unsigned long hard =
-			READ_ONCE(sig->rlim[RLIMIT_RTTIME].rlim_max);
+		unsigned long hard = task_rlimit_max(tsk, RLIMIT_RTTIME);
 
 		if (hard != RLIM_INFINITY &&
 		    tsk->rt.timeout > DIV_ROUND_UP(hard, USEC_PER_SEC/HZ)) {
@@ -847,7 +845,8 @@ static void check_thread_timers(struct task_struct *tsk,
 			 */
 			if (soft < hard) {
 				soft += USEC_PER_SEC;
-				sig->rlim[RLIMIT_RTTIME].rlim_cur = soft;
+				tsk->signal->rlim[RLIMIT_RTTIME].rlim_cur =
+					soft;
 			}
 			if (print_fatal_signals) {
 				pr_info("RT Watchdog Timeout (soft): %s[%d]\n",
@@ -938,11 +937,10 @@ static void check_process_timers(struct task_struct *tsk,
 			 SIGPROF);
 	check_cpu_itimer(tsk, &sig->it[CPUCLOCK_VIRT], &virt_expires, utime,
 			 SIGVTALRM);
-	soft = READ_ONCE(sig->rlim[RLIMIT_CPU].rlim_cur);
+	soft = task_rlimit(tsk, RLIMIT_CPU);
 	if (soft != RLIM_INFINITY) {
 		unsigned long psecs = div_u64(ptime, NSEC_PER_SEC);
-		unsigned long hard =
-			READ_ONCE(sig->rlim[RLIMIT_CPU].rlim_max);
+		unsigned long hard = task_rlimit_max(tsk, RLIMIT_CPU);
 		u64 x;
 		if (psecs >= hard) {
 			/*
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 7e7e61c00d61..8ea4fb315719 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -2064,7 +2064,7 @@ void update_wall_time(void)
 		goto out;
 
 	/* Do some additional sanity checking */
-	timekeeping_check_update(real_tk, offset);
+	timekeeping_check_update(tk, offset);
 
 	/*
 	 * With NO_HZ we may have to accumulate many cycle_intervals
diff --git a/tools/testing/selftests/timers/freq-step.c b/tools/testing/selftests/timers/freq-step.c
index 22312eb4c941..14a2b77fd012 100644
--- a/tools/testing/selftests/timers/freq-step.c
+++ b/tools/testing/selftests/timers/freq-step.c
@@ -33,6 +33,10 @@
 #define MAX_FREQ_ERROR 10e-6
 #define MAX_STDDEV 1000e-9
 
+#ifndef ADJ_SETOFFSET
+  #define ADJ_SETOFFSET 0x0100
+#endif
+
 struct sample {
 	double offset;
 	double time;
@@ -261,7 +265,7 @@ int main(int argc, char **argv)
 	set_frequency(0.0);
 
 	if (fails)
-		ksft_exit_fail();
+		return ksft_exit_fail();
 
-	ksft_exit_pass();
+	return ksft_exit_pass();
 }
diff --git a/tools/testing/selftests/timers/set-timer-lat.c b/tools/testing/selftests/timers/set-timer-lat.c
index 4fc98c5b0899..15434da23b04 100644
--- a/tools/testing/selftests/timers/set-timer-lat.c
+++ b/tools/testing/selftests/timers/set-timer-lat.c
@@ -20,6 +20,7 @@
  */
 
 
+#include <errno.h>
 #include <stdio.h>
 #include <unistd.h>
 #include <time.h>
@@ -63,6 +64,7 @@ int alarmcount;
 int clock_id;
 struct timespec start_time;
 long long max_latency_ns;
+int timer_fired_early;
 
 char *clockstring(int clockid)
 {
@@ -115,16 +117,23 @@ void sigalarm(int signo)
 	delta_ns -= NSEC_PER_SEC * TIMER_SECS * alarmcount;
 
 	if (delta_ns < 0)
-		printf("%s timer fired early: FAIL\n", clockstring(clock_id));
+		timer_fired_early = 1;
 
 	if (delta_ns > max_latency_ns)
 		max_latency_ns = delta_ns;
 }
 
-int do_timer(int clock_id, int flags)
+void describe_timer(int flags, int interval)
+{
+	printf("%-22s %s %s ",
+			clockstring(clock_id),
+			flags ? "ABSTIME":"RELTIME",
+			interval ? "PERIODIC":"ONE-SHOT");
+}
+
+int setup_timer(int clock_id, int flags, int interval, timer_t *tm1)
 {
 	struct sigevent se;
-	timer_t tm1;
 	struct itimerspec its1, its2;
 	int err;
 
@@ -136,8 +145,9 @@ int do_timer(int clock_id, int flags)
 
 	max_latency_ns = 0;
 	alarmcount = 0;
+	timer_fired_early = 0;
 
-	err = timer_create(clock_id, &se, &tm1);
+	err = timer_create(clock_id, &se, tm1);
 	if (err) {
 		if ((clock_id == CLOCK_REALTIME_ALARM) ||
 		    (clock_id == CLOCK_BOOTTIME_ALARM)) {
@@ -158,32 +168,97 @@ int do_timer(int clock_id, int flags)
 		its1.it_value.tv_sec = TIMER_SECS;
 		its1.it_value.tv_nsec = 0;
 	}
-	its1.it_interval.tv_sec = TIMER_SECS;
+	its1.it_interval.tv_sec = interval;
 	its1.it_interval.tv_nsec = 0;
 
-	err = timer_settime(tm1, flags, &its1, &its2);
+	err = timer_settime(*tm1, flags, &its1, &its2);
 	if (err) {
 		printf("%s - timer_settime() failed\n", clockstring(clock_id));
 		return -1;
 	}
 
-	while (alarmcount < 5)
-		sleep(1);
+	return 0;
+}
 
-	printf("%-22s %s max latency: %10lld ns : ",
-			clockstring(clock_id),
-			flags ? "ABSTIME":"RELTIME",
-			max_latency_ns);
+int check_timer_latency(int flags, int interval)
+{
+	int err = 0;
+
+	describe_timer(flags, interval);
+	printf("timer fired early: %7d : ", timer_fired_early);
+	if (!timer_fired_early) {
+		printf("[OK]\n");
+	} else {
+		printf("[FAILED]\n");
+		err = -1;
+	}
+
+	describe_timer(flags, interval);
+	printf("max latency: %10lld ns : ", max_latency_ns);
 
-	timer_delete(tm1);
 	if (max_latency_ns < UNRESONABLE_LATENCY) {
 		printf("[OK]\n");
+	} else {
+		printf("[FAILED]\n");
+		err = -1;
+	}
+	return err;
+}
+
+int check_alarmcount(int flags, int interval)
+{
+	describe_timer(flags, interval);
+	printf("count: %19d : ", alarmcount);
+	if (alarmcount == 1) {
+		printf("[OK]\n");
 		return 0;
 	}
 	printf("[FAILED]\n");
 	return -1;
 }
 
+int do_timer(int clock_id, int flags)
+{
+	timer_t tm1;
+	const int interval = TIMER_SECS;
+	int err;
+
+	err = setup_timer(clock_id, flags, interval, &tm1);
+	if (err)
+		return err;
+
+	while (alarmcount < 5)
+		sleep(1);
+
+	timer_delete(tm1);
+	return check_timer_latency(flags, interval);
+}
+
+int do_timer_oneshot(int clock_id, int flags)
+{
+	timer_t tm1;
+	const int interval = 0;
+	struct timeval timeout;
+	fd_set fds;
+	int err;
+
+	err = setup_timer(clock_id, flags, interval, &tm1);
+	if (err)
+		return err;
+
+	memset(&timeout, 0, sizeof(timeout));
+	timeout.tv_sec = 5;
+	FD_ZERO(&fds);
+	do {
+		err = select(FD_SETSIZE, &fds, NULL, NULL, &timeout);
+	} while (err == -1 && errno == EINTR);
+
+	timer_delete(tm1);
+	err = check_timer_latency(flags, interval);
+	err |= check_alarmcount(flags, interval);
+	return err;
+}
+
 int main(void)
 {
 	struct sigaction act;
@@ -209,6 +284,8 @@ int main(void)
 
 		ret |= do_timer(clock_id, TIMER_ABSTIME);
 		ret |= do_timer(clock_id, 0);
+		ret |= do_timer_oneshot(clock_id, TIMER_ABSTIME);
+		ret |= do_timer_oneshot(clock_id, 0);
 	}
 	if (ret)
 		return ksft_exit_fail();