summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-07-23 17:43:53 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-07-23 17:43:53 -0700
commita5ebba6b54bc8038a38d3eacac3a79bbeaf3ee24 (patch)
treed36eb26a7efd4e00381bc9f6474ea3ec31340585
parente81218f5f0fd219bd75768d845159ba4810bdd48 (diff)
parent6b21a9ce0402e0c5fd2adfa3d41328fdd8f55a9a (diff)
downloadlinux-a5ebba6b54bc8038a38d3eacac3a79bbeaf3ee24.tar.bz2
Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc power management changes from Arnd Bergmann: "These are various power management related changes, mainly concerning cpuidle on i.MX and OMAP, as well as a the move of the omap smartreflex driver to live in the power subsystem." Fix up conflicts in arch/arm/mach-{imx/mach-imx6q.c,omap2/prm2xxx_3xxx.h} * tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge ARM: OMAP2+: do not allow SmartReflex to be built as a module ARM: OMAP2: Use hwmod to initialize mmc for 2420 ARM: OMAP3: PM: cpuidle: optimize the clkdm idle latency in C1 state ARM: OMAP3: PM: cpuidle: optimize the PER latency in C1 state ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_state ARM: OMAP3: PM: cleanup cam_pwrdm leftovers ARM: OMAP3: PM: call pre/post transition per powerdomain ARM: OMAP2+: powerdomain: allow pre/post transtion to be per pwrdm ARM: OMAP3: PM: Remove IO Daisychain control from cpuidle ARM: OMAP3PLUS: hwmod: reconfigure IO Daisychain during hwmod mux ARM: OMAP3+: PRM: Enable IO wake up ARM: OMAP4: PRM: Add IO Daisychain support ARM: OMAP3: PM: Move IO Daisychain function to omap3 prm file ARM: OMAP3: PM: correct enable/disable of daisy io chain ARM: OMAP2+: PRM: fix compile for OMAP4-only build W1: OMAP HDQ1W: use runtime PM ARM: OMAP2+: HDQ1W: use omap_device W1: OMAP HDQ1W: use 32-bit register accesses W1: OMAP HDQ1W: allow driver to be built on all OMAP2+ ...
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c2
-rw-r--r--arch/arm/mach-imx/imx53-dt.c1
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c19
-rw-r--r--arch/arm/mach-imx/mach-mx53_ard.c1
-rw-r--r--arch/arm/mach-imx/mach-mx53_evk.c1
-rw-r--r--arch/arm/mach-imx/mach-mx53_loco.c1
-rw-r--r--arch/arm/mach-imx/mach-mx53_smd.c1
-rw-r--r--arch/arm/mach-imx/mm-imx5.c26
-rw-r--r--arch/arm/mach-imx/pm-imx5.c111
-rw-r--r--arch/arm/mach-omap2/Makefile5
-rw-r--r--arch/arm/mach-omap2/cpuidle34xx.c71
-rw-r--r--arch/arm/mach-omap2/devices.c108
-rw-r--r--arch/arm/mach-omap2/hdq1w.c26
-rw-r--r--arch/arm/mach-omap2/msdi.c73
-rw-r--r--arch/arm/mach-omap2/omap-mpuss-lowpower.c4
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c38
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c12
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c3
-rw-r--r--arch/arm/mach-omap2/pm.h2
-rw-r--r--arch/arm/mach-omap2/pm34xx.c63
-rw-r--r--arch/arm/mach-omap2/powerdomain.c16
-rw-r--r--arch/arm/mach-omap2/powerdomain.h4
-rw-r--r--arch/arm/mach-omap2/prcm-common.h8
-rw-r--r--arch/arm/mach-omap2/prm2xxx_3xxx.c48
-rw-r--r--arch/arm/mach-omap2/prm2xxx_3xxx.h5
-rw-r--r--arch/arm/mach-omap2/prm44xx.c63
-rw-r--r--arch/arm/mach-omap2/prm44xx.h2
-rw-r--r--arch/arm/mach-omap2/smartreflex-class3.c29
-rw-r--r--arch/arm/mach-omap2/sr_device.c39
-rw-r--r--arch/arm/mach-omap2/voltage.h21
-rw-r--r--arch/arm/plat-mxc/Makefile1
-rw-r--r--arch/arm/plat-mxc/cpuidle.c80
-rw-r--r--arch/arm/plat-mxc/include/mach/common.h6
-rw-r--r--arch/arm/plat-mxc/include/mach/cpuidle.h22
-rw-r--r--arch/arm/plat-mxc/include/mach/hardware.h25
-rw-r--r--arch/arm/plat-mxc/tzic.c4
-rw-r--r--arch/arm/plat-omap/Kconfig31
-rw-r--r--arch/arm/plat-omap/include/plat/voltage.h21
-rw-r--r--drivers/power/Kconfig2
-rw-r--r--drivers/power/Makefile1
-rw-r--r--drivers/power/avs/Kconfig12
-rw-r--r--drivers/power/avs/Makefile1
-rw-r--r--drivers/power/avs/smartreflex.c (renamed from arch/arm/mach-omap2/smartreflex.c)161
-rw-r--r--drivers/w1/masters/Kconfig2
-rw-r--r--drivers/w1/masters/omap_hdq.c86
-rw-r--r--include/linux/power/smartreflex.h (renamed from arch/arm/mach-omap2/smartreflex.h)74
46 files changed, 810 insertions, 522 deletions
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index a2200c77bf70..4b89fae14a5a 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -279,6 +279,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0");
clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
+ clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
/* Set SDHC parents to be PLL2 */
clk_set_parent(clk[esdhc_a_sel], clk[pll2_sw]);
@@ -336,7 +337,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
- clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu");
clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu");
clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu");
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index fdd90805d98e..1b7a2fc36591 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
@@ -120,6 +120,7 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
.handle_irq = imx53_handle_irq,
.timer = &imx53_timer,
.init_machine = imx53_dt_init,
+ .init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 426d2087c460..5ec0608f2a76 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -12,7 +12,9 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/cpuidle.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -24,6 +26,7 @@
#include <linux/phy.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/anatop.h>
+#include <asm/cpuidle.h>
#include <asm/smp_twd.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
@@ -31,8 +34,10 @@
#include <asm/mach/time.h>
#include <asm/system_misc.h>
#include <mach/common.h>
+#include <mach/cpuidle.h>
#include <mach/hardware.h>
+
void imx6q_restart(char mode, const char *cmd)
{
struct device_node *np;
@@ -169,6 +174,19 @@ static void __init imx6q_init_machine(void)
imx6q_usb_init();
}
+static struct cpuidle_driver imx6q_cpuidle_driver = {
+ .name = "imx6q_cpuidle",
+ .owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .state_count = 1,
+};
+
+static void __init imx6q_init_late(void)
+{
+ imx_cpuidle_init(&imx6q_cpuidle_driver);
+}
+
static void __init imx6q_map_io(void)
{
imx_lluart_map_io();
@@ -213,6 +231,7 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
.handle_irq = imx6q_handle_irq,
.timer = &imx6q_timer,
.init_machine = imx6q_init_machine,
+ .init_late = imx6q_init_late,
.dt_compat = imx6q_dt_compat,
.restart = imx6q_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
index f641a1758691..6c28e65f424d 100644
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ b/arch/arm/mach-imx/mach-mx53_ard.c
@@ -267,5 +267,6 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_ard_timer,
.init_machine = mx53_ard_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
index a1060b26fb23..09fe2197b491 100644
--- a/arch/arm/mach-imx/mach-mx53_evk.c
+++ b/arch/arm/mach-imx/mach-mx53_evk.c
@@ -174,5 +174,6 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_evk_timer,
.init_machine = mx53_evk_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
index 388c415d6b62..8abe23c1d3c8 100644
--- a/arch/arm/mach-imx/mach-mx53_loco.c
+++ b/arch/arm/mach-imx/mach-mx53_loco.c
@@ -316,5 +316,6 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_loco_timer,
.init_machine = mx53_loco_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
index f297df7ccb39..b15d6a6d3b68 100644
--- a/arch/arm/mach-imx/mach-mx53_smd.c
+++ b/arch/arm/mach-imx/mach-mx53_smd.c
@@ -163,5 +163,6 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_smd_timer,
.init_machine = mx53_smd_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 1d003053d562..f19d604e1b2a 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -16,7 +16,6 @@
#include <linux/clk.h>
#include <linux/pinctrl/machine.h>
-#include <asm/system_misc.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@@ -24,24 +23,6 @@
#include <mach/devices-common.h>
#include <mach/iomux-v3.h>
-static struct clk *gpc_dvfs_clk;
-
-static void imx5_idle(void)
-{
- /* gpc clock is needed for SRPG */
- if (gpc_dvfs_clk == NULL) {
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
- if (IS_ERR(gpc_dvfs_clk))
- return;
- clk_prepare(gpc_dvfs_clk);
- }
- clk_enable(gpc_dvfs_clk);
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- if (!tzic_enable_wake())
- cpu_do_idle();
- clk_disable(gpc_dvfs_clk);
-}
-
/*
* Define the MX50 memory map.
*/
@@ -105,7 +86,6 @@ void __init imx51_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- arm_pm_idle = imx5_idle;
}
void __init imx53_init_early(void)
@@ -243,4 +223,10 @@ void __init imx53_soc_init(void)
void __init imx51_init_late(void)
{
mx51_neon_fixup();
+ imx51_pm_init();
+}
+
+void __init imx53_init_late(void)
+{
+ imx53_pm_init();
}
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index e26a9cb05ed8..19621ed1ffa5 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -12,19 +12,30 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <asm/cacheflush.h>
+#include <asm/system_misc.h>
#include <asm/tlbflush.h>
#include <mach/common.h>
+#include <mach/cpuidle.h>
#include <mach/hardware.h>
#include "crm-regs-imx5.h"
-static struct clk *gpc_dvfs_clk;
+/*
+ * The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
+ * This is also the lowest power state possible without affecting
+ * non-cpu parts of the system. For these reasons, imx5 should default
+ * to always using this state for cpu idling. The PM_SUSPEND_STANDBY also
+ * uses this state and needs to take no action when registers remain confgiured
+ * for this state.
+ */
+#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
/*
* set cpu low power mode before WFI instruction. This function is called
* mx5 because it can be used for mx50, mx51, and mx53.
*/
-void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
+static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
{
u32 plat_lpc, arm_srpgcr, ccm_clpcr;
u32 empgc0, empgc1;
@@ -87,11 +98,6 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
}
}
-static int mx5_suspend_prepare(void)
-{
- return clk_prepare_enable(gpc_dvfs_clk);
-}
-
static int mx5_suspend_enter(suspend_state_t state)
{
switch (state) {
@@ -99,7 +105,7 @@ static int mx5_suspend_enter(suspend_state_t state)
mx5_cpu_lp_set(STOP_POWER_OFF);
break;
case PM_SUSPEND_STANDBY:
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ /* DEFAULT_IDLE_STATE already configured */
break;
default:
return -EINVAL;
@@ -114,12 +120,10 @@ static int mx5_suspend_enter(suspend_state_t state)
__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
}
cpu_do_idle();
- return 0;
-}
-static void mx5_suspend_finish(void)
-{
- clk_disable_unprepare(gpc_dvfs_clk);
+ /* return registers to default idle state */
+ mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
+ return 0;
}
static int mx5_pm_valid(suspend_state_t state)
@@ -129,25 +133,80 @@ static int mx5_pm_valid(suspend_state_t state)
static const struct platform_suspend_ops mx5_suspend_ops = {
.valid = mx5_pm_valid,
- .prepare = mx5_suspend_prepare,
.enter = mx5_suspend_enter,
- .finish = mx5_suspend_finish,
};
-static int __init mx5_pm_init(void)
+static inline int imx5_cpu_do_idle(void)
+{
+ int ret = tzic_enable_wake();
+
+ if (likely(!ret))
+ cpu_do_idle();
+
+ return ret;
+}
+
+static void imx5_pm_idle(void)
+{
+ imx5_cpu_do_idle();
+}
+
+static int imx5_cpuidle_enter(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int idx)
+{
+ int ret;
+
+ ret = imx5_cpu_do_idle();
+ if (ret < 0)
+ return ret;
+
+ return idx;
+}
+
+static struct cpuidle_driver imx5_cpuidle_driver = {
+ .name = "imx5_cpuidle",
+ .owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
+ .states[0] = {
+ .enter = imx5_cpuidle_enter,
+ .exit_latency = 2,
+ .target_residency = 1,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "IMX5 SRPG",
+ .desc = "CPU state retained,powered off",
+ },
+ .state_count = 1,
+};
+
+static int __init imx5_pm_common_init(void)
{
- if (!cpu_is_mx51() && !cpu_is_mx53())
- return 0;
+ int ret;
+ struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
- if (gpc_dvfs_clk == NULL)
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+ if (IS_ERR(gpc_dvfs_clk))
+ return PTR_ERR(gpc_dvfs_clk);
- if (!IS_ERR(gpc_dvfs_clk)) {
- if (cpu_is_mx51())
- suspend_set_ops(&mx5_suspend_ops);
- } else
- return -EPERM;
+ ret = clk_prepare_enable(gpc_dvfs_clk);
+ if (ret)
+ return ret;
+ arm_pm_idle = imx5_pm_idle;
+
+ /* Set the registers to the default cpu idle state. */
+ mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
+
+ imx_cpuidle_init(&imx5_cpuidle_driver);
return 0;
}
-device_initcall(mx5_pm_init);
+
+void __init imx51_pm_init(void)
+{
+ int ret = imx5_pm_common_init();
+ if (!ret)
+ suspend_set_ops(&mx5_suspend_ops);
+}
+
+void __init imx53_pm_init(void)
+{
+ imx5_pm_common_init();
+}
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 19b771d0c0d7..b7a4ab65faca 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -74,8 +74,9 @@ obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
-obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
-obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
+
+obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 31344528eb54..f2a49a48ef59 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -75,20 +75,6 @@ static struct omap3_idle_statedata omap3_idle_data[] = {
static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
-static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
- struct clockdomain *clkdm)
-{
- clkdm_allow_idle(clkdm);
- return 0;
-}
-
-static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
- struct clockdomain *clkdm)
-{
- clkdm_deny_idle(clkdm);
- return 0;
-}
-
static int __omap3_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
@@ -106,8 +92,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
/* Deny idle for C1 */
if (index == 0) {
- pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
- pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
+ clkdm_deny_idle(mpu_pd->pwrdm_clkdms[0]);
+ clkdm_deny_idle(core_pd->pwrdm_clkdms[0]);
}
/*
@@ -129,8 +115,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
/* Re-allow idle for C1 */
if (index == 0) {
- pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
- pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
+ clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]);
+ clkdm_allow_idle(core_pd->pwrdm_clkdms[0]);
}
return_sleep_time:
@@ -176,7 +162,7 @@ static int next_valid_state(struct cpuidle_device *dev,
u32 mpu_deepest_state = PWRDM_POWER_RET;
u32 core_deepest_state = PWRDM_POWER_RET;
int idx;
- int next_index = -1;
+ int next_index = 0; /* C1 is the default value */
if (enable_off_mode) {
mpu_deepest_state = PWRDM_POWER_OFF;
@@ -207,12 +193,6 @@ static int next_valid_state(struct cpuidle_device *dev,
}
}
- /*
- * C1 is always valid.
- * So, no need to check for 'next_index == -1' outside
- * this loop.
- */
-
return next_index;
}
@@ -226,23 +206,22 @@ static int next_valid_state(struct cpuidle_device *dev,
* the device to the specified or a safer state.
*/
static int omap3_enter_idle_bm(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
+ struct cpuidle_driver *drv,
int index)
{
int new_state_idx;
- u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state;
+ u32 core_next_state, per_next_state = 0, per_saved_state = 0;
struct omap3_idle_statedata *cx;
int ret;
/*
- * Prevent idle completely if CAM is active.
+ * Use only C1 if CAM is active.
* CAM does not have wakeup capability in OMAP3.
*/
- cam_state = pwrdm_read_pwrst(cam_pd);
- if (cam_state == PWRDM_POWER_ON) {
+ if (pwrdm_read_pwrst(cam_pd) == PWRDM_POWER_ON)
new_state_idx = drv->safe_state_index;
- goto select_state;
- }
+ else
+ new_state_idx = next_valid_state(dev, drv, index);
/*
* FIXME: we currently manage device-specific idle states
@@ -252,24 +231,28 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
* its own code.
*/
- /*
- * Prevent PER off if CORE is not in retention or off as this
- * would disable PER wakeups completely.
- */
- cx = &omap3_idle_data[index];
+ /* Program PER state */
+ cx = &omap3_idle_data[new_state_idx];
core_next_state = cx->core_state;
per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
- if ((per_next_state == PWRDM_POWER_OFF) &&
- (core_next_state > PWRDM_POWER_RET))
- per_next_state = PWRDM_POWER_RET;
+ if (new_state_idx == 0) {
+ /* In C1 do not allow PER state lower than CORE state */
+ if (per_next_state < core_next_state)
+ per_next_state = core_next_state;
+ } else {
+ /*
+ * Prevent PER OFF if CORE is not in RETention or OFF as this
+ * would disable PER wakeups completely.
+ */
+ if ((per_next_state == PWRDM_POWER_OFF) &&
+ (core_next_state > PWRDM_POWER_RET))
+ per_next_state = PWRDM_POWER_RET;
+ }
/* Are we changing PER target state? */
if (per_next_state != per_saved_state)
pwrdm_set_next_pwrst(per_pd, per_next_state);
- new_state_idx = next_valid_state(dev, drv, index);
-
-select_state:
ret = omap3_enter_idle(dev, drv, new_state_idx);
/* Restore original PER state if it was modified */
@@ -286,7 +269,7 @@ struct cpuidle_driver omap3_idle_driver = {
.owner = THIS_MODULE,
.states = {
{
- .enter = omap3_enter_idle,
+ .enter = omap3_enter_idle_bm,
.exit_latency = 2 + 2,
.target_residency = 5,
.flags = CPUIDLE_FLAG_TIME_VALID,
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 71651e20a43e..c00c68961bb8 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -27,7 +27,6 @@
#include "iomap.h"
#include <plat/board.h>
-#include <plat/mmc.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
@@ -603,112 +602,6 @@ static inline void omap_init_aes(void) { }
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
- *mmc_controller)
-{
- if ((mmc_controller->slots[0].switch_pin > 0) && \
- (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
- OMAP_PIN_INPUT_PULLUP);
- if ((mmc_controller->slots[0].gpio_wp > 0) && \
- (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
- OMAP_PIN_INPUT_PULLUP);
-
- omap_mux_init_signal("sdmmc_cmd", 0);
- omap_mux_init_signal("sdmmc_clki", 0);
- omap_mux_init_signal("sdmmc_clko", 0);
- omap_mux_init_signal("sdmmc_dat0", 0);
- omap_mux_init_signal("sdmmc_dat_dir0", 0);
- omap_mux_init_signal("sdmmc_cmd_dir", 0);
- if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
- omap_mux_init_signal("sdmmc_dat1", 0);
- omap_mux_init_signal("sdmmc_dat2", 0);
- omap_mux_init_signal("sdmmc_dat3", 0);
- omap_mux_init_signal("sdmmc_dat_dir1", 0);
- omap_mux_init_signal("sdmmc_dat_dir2", 0);
- omap_mux_init_signal("sdmmc_dat_dir3", 0);
- }
-
- /*
- * Use internal loop-back in MMC/SDIO Module Input Clock
- * selection
- */
- if (mmc_controller->slots[0].internal_clock) {
- u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- v |= (1 << 24);
- omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
- }
-}
-
-void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
- struct platform_device *pdev;
- struct omap_hwmod *oh;
- int id = 0;
- char *oh_name = "msdi1";
- char *dev_name = "mmci-omap";
-
- if (!mmc_data[0]) {
- pr_err("%s fails: Incomplete platform data\n", __func__);
- return;
- }
-
- omap242x_mmc_mux(mmc_data[0]);
-
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return;
- }
- pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
- sizeof(struct omap_mmc_platform_data), NULL, 0, 0);
- if (IS_ERR(pdev))
- WARN(1, "Can'd build omap_device for %s:%s.\n",
- dev_name, oh->name);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
-#define OMAP_HDQ_BASE 0x480B2000
-static struct resource omap_hdq_resources[] = {
- {
- .start = OMAP_HDQ_BASE,
- .end = OMAP_HDQ_BASE + 0x1C,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_24XX_HDQ_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-static struct platform_device omap_hdq_dev = {
- .name = "omap_hdq",
- .id = 0,
- .dev = {
- .platform_data = NULL,
- },
- .num_resources = ARRAY_SIZE(omap_hdq_resources),
- .resource = omap_hdq_resources,
-};
-static inline void omap_hdq_init(void)
-{
- if (cpu_is_omap2420())
- return;
-
- platform_device_register(&omap_hdq_dev);
-}
-#else
-static inline void omap_hdq_init(void) {}
-#endif
-
-/*---------------------------------------------------------------------------*/
-
#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
@@ -753,7 +646,6 @@ static int __init omap2_init_devices(void)
omap_init_mcspi();
}
omap_init_pmu();
- omap_hdq_init();
omap_init_sti();
omap_init_sham();
omap_init_aes();
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index 297ebe03f09c..cdd6dda03828 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -22,7 +22,13 @@
* 02110-1301 USA
*/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
#include <plat/hdq1w.h>
#include "common.h"
@@ -70,3 +76,23 @@ int omap_hdq1w_reset(struct omap_hwmod *oh)
return 0;
}
+
+static int __init omap_init_hdq(void)
+{
+ int id = -1;
+ struct platform_device *pdev;
+ struct omap_hwmod *oh;
+ char *oh_name = "hdq1w";
+ char *devname = "omap_hdq";
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh)
+ return 0;
+
+ pdev = omap_device_build(devname, id, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
+ devname, oh->name);
+
+ return 0;
+}
+arch_initcall(omap_init_hdq);
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index ef2a6924731a..fb5bc6cf3773 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -22,11 +22,15 @@
*/
#include <linux/kernel.h>
+#include <linux/err.h>
#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
#include <plat/mmc.h>
#include "common.h"
+#include "control.h"
+#include "mux.h"
/*
* MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
@@ -86,3 +90,72 @@ int omap_msdi_reset(struct omap_hwmod *oh)
return 0;
}
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
+ *mmc_controller)
+{
+ if ((mmc_controller->slots[0].switch_pin > 0) && \
+ (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
+ OMAP_PIN_INPUT_PULLUP);
+ if ((mmc_controller->slots[0].gpio_wp > 0) && \
+ (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
+ OMAP_PIN_INPUT_PULLUP);
+
+ omap_mux_init_signal("sdmmc_cmd", 0);
+ omap_mux_init_signal("sdmmc_clki", 0);
+ omap_mux_init_signal("sdmmc_clko", 0);
+ omap_mux_init_signal("sdmmc_dat0", 0);
+ omap_mux_init_signal("sdmmc_dat_dir0", 0);
+ omap_mux_init_signal("sdmmc_cmd_dir", 0);
+ if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
+ omap_mux_init_signal("sdmmc_dat1", 0);
+ omap_mux_init_signal("sdmmc_dat2", 0);
+ omap_mux_init_signal("sdmmc_dat3", 0);
+ omap_mux_init_signal("sdmmc_dat_dir1", 0);
+ omap_mux_init_signal("sdmmc_dat_dir2", 0);
+ omap_mux_init_signal("sdmmc_dat_dir3", 0);
+ }
+
+ /*
+ * Use internal loop-back in MMC/SDIO Module Input Clock
+ * selection
+ */
+ if (mmc_controller->slots[0].internal_clock) {
+ u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+ v |= (1 << 24);
+ omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+ }
+}
+
+void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+ struct platform_device *pdev;
+ struct omap_hwmod *oh;
+ int id = 0;
+ char *oh_name = "msdi1";
+ char *dev_name = "mmci-omap";
+
+ if (!mmc_data[0]) {
+ pr_err("%s fails: Incomplete platform data\n", __func__);
+ return;
+ }
+
+ omap242x_mmc_mux(mmc_data[0]);
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return;
+ }
+ pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
+ sizeof(struct omap_mmc_platform_data), NULL, 0, 0);
+ if (IS_ERR(pdev))
+ WARN(1, "Can'd build omap_device for %s:%s.\n",
+ dev_name, oh->name);
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 13670aa84e58..e35a86bf4e1d 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -255,7 +255,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
return -ENXIO;
}
- pwrdm_pre_transition();
+ pwrdm_pre_transition(NULL);
/*
* Check MPUSS next state and save interrupt controller if needed.
@@ -287,7 +287,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
wakeup_cpu = smp_processor_id();
set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON);
- pwrdm_post_transition();
+ pwrdm_post_transition(NULL);
return 0;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 3f21568f1753..6ca8e519968d 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -153,6 +153,7 @@
#include "prm44xx.h"
#include "prminst44xx.h"
#include "mux.h"
+#include "pm.h"
/* Maximum microseconds to wait for OMAP module to softreset */
#define MAX_MODULE_SOFTRESET_WAIT 10000
@@ -197,6 +198,9 @@ static LIST_HEAD(omap_hwmod_list);
/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
static struct omap_hwmod *mpu_oh;
+/* io_chain_lock: used to serialize reconfigurations of the I/O chain */
+static DEFINE_SPINLOCK(io_chain_lock);
+
/*
* linkspace: ptr to a buffer that struct omap_hwmod_link records are
* allocated from - used to reduce the number of small memory
@@ -1759,6 +1763,32 @@ static int _reset(struct omap_hwmod *oh)
}
/**
+ * _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain
+ *
+ * Call the appropriate PRM function to clear any logged I/O chain
+ * wakeups and to reconfigure the chain. This apparently needs to be
+ * done upon every mux change. Since hwmods can be concurrently
+ * enabled and idled, hold a spinlock around the I/O chain
+ * reconfiguration sequence. No return value.
+ *
+ * XXX When the PRM code is moved to drivers, this function can be removed,
+ * as the PRM infrastructure should abstract this.
+ */
+static void _reconfigure_io_chain(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&io_chain_lock, flags);
+
+ if (cpu_is_omap34xx() && omap3_has_io_chain_ctrl())
+ omap3xxx_prm_reconfigure_io_chain();
+ else if (cpu_is_omap44xx())
+ omap44xx_prm_reconfigure_io_chain();
+
+ spin_unlock_irqrestore(&io_chain_lock, flags);
+}
+
+/**
* _enable - enable an omap_hwmod
* @oh: struct omap_hwmod *
*
@@ -1814,8 +1844,10 @@ static int _enable(struct omap_hwmod *oh)
/* Mux pins for device runtime if populated */
if (oh->mux && (!oh->mux->enabled ||
((oh->_state == _HWMOD_STATE_IDLE) &&
- oh->mux->pads_dynamic)))
+ oh->mux->pads_dynamic))) {
omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
+ _reconfigure_io_chain();
+ }
_add_initiator_dep(oh, mpu_oh);
@@ -1907,8 +1939,10 @@ static int _idle(struct omap_hwmod *oh)
clkdm_hwmod_disable(oh->clkdm, oh);
/* Mux pins for device idle if populated */
- if (oh->mux && oh->mux->pads_dynamic)
+ if (oh->mux && oh->mux->pads_dynamic) {
omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
+ _reconfigure_io_chain();
+ }
oh->_state = _HWMOD_STATE_IDLE;
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index cdb9637aab19..c9e38200216b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -14,6 +14,8 @@
*
* XXX these should be marked initdata for multi-OMAP kernels
*/
+#include <linux/power/smartreflex.h>
+
#include <plat/omap_hwmod.h>
#include <mach/irqs.h>
#include <plat/cpu.h>
@@ -29,8 +31,6 @@
#include <plat/dmtimer.h>
#include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
#include "wd_timer.h"
@@ -1357,7 +1357,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
};
static struct omap_hwmod omap34xx_sr1_hwmod = {
- .name = "sr1",
+ .name = "smartreflex_mpu_iva",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
.prcm = {
@@ -1375,7 +1375,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
};
static struct omap_hwmod omap36xx_sr1_hwmod = {
- .name = "sr1",
+ .name = "smartreflex_mpu_iva",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
.prcm = {
@@ -1402,7 +1402,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
};
static struct omap_hwmod omap34xx_sr2_hwmod = {
- .name = "sr2",
+ .name = "smartreflex_core",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
.prcm = {
@@ -1420,7 +1420,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
};
static struct omap_hwmod omap36xx_sr2_hwmod = {
- .name = "sr2",
+ .name = "smartreflex_core",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
.prcm = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 5c2ce7e77838..242aee498ceb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -19,6 +19,7 @@
*/
#include <linux/io.h>
+#include <linux/power/smartreflex.h>
#include <plat/omap_hwmod.h>
#include <plat/cpu.h>
@@ -32,8 +33,6 @@
#include <plat/common.h>
#include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "prm44xx.h"
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index ab04d3bba2e7..686137d164da 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -101,7 +101,7 @@ extern void enable_omap3630_toggle_l2_on_restore(void);
static inline void enable_omap3630_toggle_l2_on_restore(void) { }
#endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
-#ifdef CONFIG_OMAP_SMARTREFLEX
+#ifdef CONFIG_POWER_AVS_OMAP
extern int omap_devinit_smartreflex(void);
extern void omap_enable_smartreflex_on_init(void);
#else
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 9b463c987508..e4fc88c65dbd 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -70,34 +70,6 @@ void (*omap3_do_wfi_sram)(void);
static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
static struct powerdomain *core_pwrdm, *per_pwrdm;
-static struct powerdomain *cam_pwrdm;
-
-static void omap3_enable_io_chain(void)
-{
- int timeout = 0;
-
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
- /* Do a readback to assure write has been done */
- omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-
- while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
- OMAP3430_ST_IO_CHAIN_MASK)) {
- timeout++;
- if (timeout > 1000) {
- pr_err("Wake up daisy chain activation failed.\n");
- return;
- }
- omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
- WKUP_MOD, PM_WKEN);
- }
-}
-
-static void omap3_disable_io_chain(void)
-{
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
-}
static void omap3_core_save_context(void)
{
@@ -299,24 +271,22 @@ void omap_sram_idle(void)
/* Enable IO-PAD and IO-CHAIN wakeups */
per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
- if (omap3_has_io_wakeup() &&
- (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)) {
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
- if (omap3_has_io_chain_ctrl())
- omap3_enable_io_chain();
- }
- pwrdm_pre_transition();
+ if (mpu_next_state < PWRDM_POWER_ON) {
+ pwrdm_pre_transition(mpu_pwrdm);
+ pwrdm_pre_transition(neon_pwrdm);
+ }
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
+ pwrdm_pre_transition(per_pwrdm);
per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
omap2_gpio_prepare_for_idle(per_going_off);
}
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
+ pwrdm_pre_transition(core_pwrdm);
if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
omap3_cm_save_context();
@@ -369,26 +339,20 @@ void omap_sram_idle(void)
omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
+ pwrdm_post_transition(core_pwrdm);
}
omap3_intc_resume_idle();
- pwrdm_post_transition();
-
/* PER */
- if (per_next_state < PWRDM_POWER_ON)
+ if (per_next_state < PWRDM_POWER_ON) {
omap2_gpio_resume_after_idle();
-
- /* Disable IO-PAD and IO-CHAIN wakeup */
- if (omap3_has_io_wakeup() &&
- (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)) {
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
- PM_WKEN);
- if (omap3_has_io_chain_ctrl())
- omap3_disable_io_chain();
+ pwrdm_post_transition(per_pwrdm);
}
- clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
+ if (mpu_next_state < PWRDM_POWER_ON) {
+ pwrdm_post_transition(mpu_pwrdm);
+ pwrdm_post_transition(neon_pwrdm);
+ }
}
static void omap3_pm_idle(void)
@@ -754,7 +718,6 @@ int __init omap3_pm_init(void)
neon_pwrdm = pwrdm_lookup("neon_pwrdm");
per_pwrdm = pwrdm_lookup("per_pwrdm");
core_pwrdm = pwrdm_lookup("core_pwrdm");
- cam_pwrdm = pwrdm_lookup("cam_pwrdm");
neon_clkdm = clkdm_lookup("neon_clkdm");
mpu_clkdm = clkdm_lookup("mpu_clkdm");
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 2f963f702a05..69b36e185e9b 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -985,15 +985,23 @@ int pwrdm_state_switch(struct powerdomain *pwrdm)
return ret;
}
-int pwrdm_pre_transition(void)
+int pwrdm_pre_transition(struct powerdomain *pwrdm)
{
- pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
+ if (pwrdm)
+ _pwrdm_pre_transition_cb(pwrdm, NULL);
+ else
+ pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
+
return 0;
}
-int pwrdm_post_transition(void)
+int pwrdm_post_transition(struct powerdomain *pwrdm)
{
- pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
+ if (pwrdm)
+ _pwrdm_post_transition_cb(pwrdm, NULL);
+ else
+ pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
+
return 0;
}
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index a8a95184243d..baee90608d11 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -230,8 +230,8 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
int pwrdm_wait_transition(struct powerdomain *pwrdm);
int pwrdm_state_switch(struct powerdomain *pwrdm);
-int pwrdm_pre_transition(void);
-int pwrdm_post_transition(void);
+int pwrdm_pre_transition(struct powerdomain *pwrdm);
+int pwrdm_post_transition(struct powerdomain *pwrdm);
int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index d5ae4e234bbc..e5f0503a68b0 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -410,6 +410,14 @@
*/
#define MAX_MODULE_HARDRESET_WAIT 10000
+/*
+ * Maximum time(us) it takes to output the signal WUCLKOUT of the last
+ * pad of the I/O ring after asserting WUCLKIN high. Tero measured
+ * the actual time at 7 to 8 microseconds on OMAP3 and 2 to 4
+ * microseconds on OMAP4, so this timeout may be too high.
+ */
+#define MAX_IOPAD_LATCH_TIME 100
+
# ifndef __ASSEMBLER__
extern void __iomem *prm_base;
extern void __iomem *cm_base;
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 21cb74003a56..a0309dea6794 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -302,11 +302,59 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask)
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
}
+/**
+ * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings. Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
+ * return value.
+ */
+void omap3xxx_prm_reconfigure_io_chain(void)
+{
+ int i = 0;
+
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+
+ omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+ OMAP3430_ST_IO_CHAIN_MASK,
+ MAX_IOPAD_LATCH_TIME, i);
+ if (i == MAX_IOPAD_LATCH_TIME)
+ pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+ omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+
+ omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKST);
+
+ omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
+}
+
+/**
+ * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM. For I/O
+ * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
+ * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
+ * No return value.
+ */
+static void __init omap3xxx_prm_enable_io_wakeup(void)
+{
+ if (omap3_has_io_wakeup())
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+ PM_WKEN);
+}
+
static int __init omap3xxx_prcm_init(void)
{
int ret = 0;
if (cpu_is_omap34xx()) {
+ omap3xxx_prm_enable_io_wakeup();
ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
if (!ret)
irq_set_status_flags(omap_prcm_event_to_irq("io"),
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index f7bb57fff416..c19d249b4816 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -253,12 +253,15 @@ extern u32 omap3_prm_vcvp_read(u8 offset);
extern void omap3_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+extern void omap3xxx_prm_reconfigure_io_chain(void);
+
/* PRM interrupt-related functions */
extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
extern void omap3xxx_prm_ocp_barrier(void);
extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-#endif
+
+#endif /* __ASSEMBLER */
/*
* Bits common to specific registers
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index f106d21ff581..bb727c2d9337 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -233,10 +233,71 @@ void omap44xx_prm_restore_irqen(u32 *saved_mask)
OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
}
+/**
+ * omap44xx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings. Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted.
+ * No return value. XXX Are the final two steps necessary?
+ */
+void omap44xx_prm_reconfigure_io_chain(void)
+{
+ int i = 0;
+
+ /* Trigger WUCLKIN enable */
+ omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK,
+ OMAP4430_WUCLK_CTRL_MASK,
+ OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IO_PMCTRL_OFFSET);
+ omap_test_timeout(
+ (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IO_PMCTRL_OFFSET) &
+ OMAP4430_WUCLK_STATUS_MASK) >>
+ OMAP4430_WUCLK_STATUS_SHIFT) == 1),
+ MAX_IOPAD_LATCH_TIME, i);
+ if (i == MAX_IOPAD_LATCH_TIME)
+ pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+ /* Trigger WUCLKIN disable */
+ omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0,
+ OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IO_PMCTRL_OFFSET);
+ omap_test_timeout(
+ (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IO_PMCTRL_OFFSET) &
+ OMAP4430_WUCLK_STATUS_MASK) >>
+ OMAP4430_WUCLK_STATUS_SHIFT) == 0),
+ MAX_IOPAD_LATCH_TIME, i);
+ if (i == MAX_IOPAD_LATCH_TIME)
+ pr_warn("PRM: I/O chain clock line deassertion timed out\n");
+
+ return;
+}
+
+/**
+ * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM. For I/O wakeups
+ * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
+ * omap44xx_prm_reconfigure_io_chain() must be called. No return value.
+ */
+static void __init omap44xx_prm_enable_io_wakeup(void)
+{
+ omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
+ OMAP4430_GLOBAL_WUEN_MASK,
+ OMAP4430_PRM_DEVICE_INST,
+ OMAP4_PRM_IO_PMCTRL_OFFSET);
+}
+
static int __init omap4xxx_prcm_init(void)
{
- if (cpu_is_omap44xx())
+ if (cpu_is_omap44xx()) {
+ omap44xx_prm_enable_io_wakeup();
return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+ }
return 0;
}
subsys_initcall(omap4xxx_prcm_init);
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 7978092946db..ee72ae6bd8c9 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -763,6 +763,8 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
extern void omap4_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+extern void omap44xx_prm_reconfigure_io_chain(void);
+
/* PRM interrupt-related functions */
extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
extern void omap44xx_prm_ocp_barrier(void);
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index 955566eefac4..1da8f03c479e 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -11,36 +11,37 @@
* published by the Free Software Foundation.
*/
-#include "smartreflex.h"
+#include <linux/power/smartreflex.h>
+#include "voltage.h"
-static int sr_class3_enable(struct voltagedomain *voltdm)
+static int sr_class3_enable(struct omap_sr *sr)
{
- unsigned long volt = voltdm_get_voltage(voltdm);
+ unsigned long volt = voltdm_get_voltage(sr->voltdm);
if (!volt) {
- pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
- __func__, voltdm->name);
+ pr_warning("%s: Curr voltage unknown. Cannot enable %s\n",
+ __func__, sr->name);
return -ENODATA;
}
- omap_vp_enable(voltdm);
- return sr_enable(voltdm, volt);
+ omap_vp_enable(sr->voltdm);
+ return sr_enable(sr->voltdm, volt);
}
-static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
+static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset)
{
- sr_disable_errgen(voltdm);
- omap_vp_disable(voltdm);
- sr_disable(voltdm);
+ sr_disable_errgen(sr->voltdm);
+ omap_vp_disable(sr->voltdm);
+ sr_disable(sr->voltdm);
if (is_volt_reset)
- voltdm_reset(voltdm);
+ voltdm_reset(sr->voltdm);
return 0;
}
-static int sr_class3_configure(struct voltagedomain *voltdm)
+static int sr_class3_configure(struct omap_sr *sr)
{
- return sr_configure_errgen(voltdm);
+ return sr_configure_errgen(sr->voltdm);
}
/* SR class3 structure */
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index a503e1e8358c..e107e3915a8a 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -17,6 +17,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/power/smartreflex.h>
#include <linux/err.h>
#include <linux/slab.h>
@@ -24,7 +25,6 @@
#include <plat/omap_device.h>
-#include "smartreflex.h"
#include "voltage.h"
#include "control.h"
#include "pm.h"
@@ -36,7 +36,10 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
struct omap_sr_data *sr_data)
{
struct omap_sr_nvalue_table *nvalue_table;
- int i, count = 0;
+ int i, j, count = 0;
+
+ sr_data->nvalue_count = 0;
+ sr_data->nvalue_table = NULL;
while (volt_data[count].volt_nominal)
count++;
@@ -44,8 +47,14 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
GFP_KERNEL);
- for (i = 0; i < count; i++) {
+ if (!nvalue_table) {
+ pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n");
+ return;
+ }
+
+ for (i = 0, j = 0; i < count; i++) {
u32 v;
+
/*
* In OMAP4 the efuse registers are 24 bit aligned.
* A __raw_readl will fail for non-32 bit aligned address
@@ -58,15 +67,30 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
omap_ctrl_readb(offset + 1) << 8 |
omap_ctrl_readb(offset + 2) << 16;
} else {
- v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
+ v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
}
- nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs;
- nvalue_table[i].nvalue = v;
+ /*
+ * Many OMAP SoCs don't have the eFuse values set.
+ * For example, pretty much all OMAP3xxx before
+ * ES3.something.
+ *
+ * XXX There needs to be some way for board files or
+ * userspace to add these in.
+ */
+ if (v == 0)
+ continue;
+
+ nvalue_table[j].nvalue = v;
+ nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs;
+ nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit;
+ nvalue_table[j].volt_nominal = volt_data[i].volt_nominal;
+
+ j++;
}
sr_data->nvalue_table = nvalue_table;
- sr_data->nvalue_count = count;
+ sr_data->nvalue_count = j;
}
static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
@@ -93,6 +117,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
goto exit;
}
+ sr_data->name = oh->name;
sr_data->ip_type = oh->class->rev;
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index a7c43c1042be..0ac2caf15941 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -16,6 +16,8 @@
#include <linux/err.h>
+#include <plat/voltage.h>
+
#include "vc.h"
#include "vp.h"
@@ -91,25 +93,6 @@ struct voltagedomain {
};
/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal: The possible voltage value in uV
- * @sr_efuse_offs: The offset of the efuse register(from system
- * control module base address) from where to read
- * the n-target value for the smartreflex module.
- * @sr_errminlimit: Error min limit value for smartreflex. This value
- * differs at differnet opp and thus is linked
- * with voltage.
- * @vp_errorgain: Error gain value for the voltage processor. This
- * field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
- u32 volt_nominal;
- u32 sr_efuse_offs;
- u8 sr_errminlimit;
- u8 vp_errgain;
-};
-
-/**
* struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
* @slew_rate: PMIC slew rate (in uv/us)
* @step_size: PMIC voltage step size (in uv)
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index e81290c27c65..63b064b5c1d5 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
ifdef CONFIG_SND_IMX_SOC
obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
diff --git a/arch/arm/plat-mxc/cpuidle.c b/arch/arm/plat-mxc/cpuidle.c
new file mode 100644
index 000000000000..d4cb511a44a8
--- /dev/null
+++ b/arch/arm/plat-mxc/cpuidle.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/err.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+static struct cpuidle_device __percpu * imx_cpuidle_devices;
+
+static void __init imx_cpuidle_devices_uninit(void)
+{
+ int cpu_id;
+ struct cpuidle_device *dev;
+
+ for_each_possible_cpu(cpu_id) {
+ dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
+ cpuidle_unregister_device(dev);
+ }
+
+ free_percpu(imx_cpuidle_devices);
+}
+
+int __init imx_cpuidle_init(struct cpuidle_driver *drv)
+{
+ struct cpuidle_device *dev;
+ int cpu_id, ret;
+
+ if (drv->state_count > CPUIDLE_STATE_MAX) {
+ pr_err("%s: state_count exceeds maximum\n", __func__);
+ return -EINVAL;
+ }
+
+ ret = cpuidle_register_driver(drv);
+ if (ret) {
+ pr_err("%s: Failed to register cpuidle driver with error: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ imx_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+ if (imx_cpuidle_devices == NULL) {
+ ret = -ENOMEM;
+ goto unregister_drv;
+ }
+
+ /* initialize state data for each cpuidle_device */
+ for_each_possible_cpu(cpu_id) {
+ dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
+ dev->cpu = cpu_id;
+ dev->state_count = drv->state_count;
+
+ ret = cpuidle_register_device(dev);
+ if (ret) {
+ pr_err("%s: Failed to register cpu %u, error: %d\n",
+ __func__, cpu_id, ret);
+ goto uninit;
+ }
+ }
+
+ return 0;
+
+uninit:
+ imx_cpuidle_devices_uninit();
+
+unregister_drv:
+ cpuidle_unregister_driver(drv);
+ return ret;
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 7cfcc44537f0..7128e9710417 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -54,6 +54,7 @@ extern void imx50_soc_init(void);
extern void imx51_soc_init(void);
extern void imx53_soc_init(void);
extern void imx51_init_late(void);
+extern void imx53_init_late(void);
extern void epit_timer_init(void __iomem *base, int irq);
extern void mxc_timer_init(void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
@@ -96,7 +97,6 @@ enum mx3_cpu_pwr_mode {
};
extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
-extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
extern void imx_print_silicon_rev(const char *cpu, int srev);
void avic_handle_irq(struct pt_regs *);
@@ -147,8 +147,12 @@ extern void imx6q_clock_map_io(void);
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);
+extern void imx51_pm_init(void);
+extern void imx53_pm_init(void);
#else
static inline void imx6q_pm_init(void) {}
+static inline void imx51_pm_init(void) {}
+static inline void imx53_pm_init(void) {}
#endif
#ifdef CONFIG_NEON
diff --git a/arch/arm/plat-mxc/include/mach/cpuidle.h b/arch/arm/plat-mxc/include/mach/cpuidle.h
new file mode 100644
index 000000000000..bc932d1af372
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/cpuidle.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/cpuidle.h>
+
+#ifdef CONFIG_CPU_IDLE
+extern int imx_cpuidle_init(struct cpuidle_driver *drv);
+#else
+static inline int imx_cpuidle_init(struct cpuidle_driver *drv)
+{
+ return -ENODEV;
+}
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 1d432a75e409..ebf10654bb42 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -50,7 +50,7 @@
* IO 0x00200000+0x100000 -> 0xf4000000+0x100000
* mx21:
* AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
- * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000
* X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000
* mx25:
* AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
@@ -58,47 +58,50 @@
* AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
* mx27:
* AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
- * SAHB1 0x80000000+0x100000 -> 0xf4000000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000
* X_MEMC 0xd8000000+0x100000 -> 0xf5c00000+0x100000
* mx31:
* AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
* AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
- * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* mx35:
* AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
* AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
- * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* mx50:
* TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
- * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx51:
- * TZIC 0xe0000000+0x004000 -> 0xf5000000+0x004000
+ * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
* IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000
+ * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000
* SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
- * AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
+ * AIPS2 0x83f00000+0x100000 -> 0xf5300000+0x100000
* mx53:
* TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
+ * DEBUG 0x40000000+0x100000 -> 0xf5000000+0x100000
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx6q:
- * SCU 0x00a00000+0x001000 -> 0xf4000000+0x001000
+ * SCU 0x00a00000+0x004000 -> 0xf4000000+0x004000
* CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000
- * ANATOP 0x020c8000+0x001000 -> 0xf42c8000+0x001000
+ * ANATOP 0x020c8000+0x004000 -> 0xf42c8000+0x004000
* UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000
*/
#define IMX_IO_P2V(x) ( \
- 0xf4000000 + \
+ (((x) & 0x80000000) >> 7) | \
+ (0xf4000000 + \
(((x) & 0x50000000) >> 6) + \
(((x) & 0x0b000000) >> 4) + \
- (((x) & 0x000fffff)))
+ (((x) & 0x000fffff))))
#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x))
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index c60a7e416385..c2193178210b 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -202,6 +202,10 @@ void __init tzic_init_irq(void __iomem *irqbase)
* tzic_enable_wake() - enable wakeup interrupt
*
* @return 0 if successful; non-zero otherwise
+ *
+ * This function provides an interrupt synchronization point that is required
+ * by tzic enabled platforms before entering imx specific low power modes (ie,
+ * those low power modes beyond the WAIT_CLOCKED basic ARM WFI only mode).
*/
int tzic_enable_wake(void)
{
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index dcfb506a592e..dd36eba9506c 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -45,31 +45,30 @@ config OMAP_DEBUG_LEDS
depends on OMAP_DEBUG_DEVICES
default y if LEDS_CLASS
-config OMAP_SMARTREFLEX
- bool "SmartReflex support"
- depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+config POWER_AVS_OMAP
+ bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
+ depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
help
- Say Y if you want to enable SmartReflex.
-
- SmartReflex can perform continuous dynamic voltage
- scaling around the nominal operating point voltage
- according to silicon characteristics and operating
- conditions. Enabling SmartReflex reduces power
- consumption.
+ Say Y to enable AVS(Adaptive Voltage Scaling)
+ support on OMAP containing the version 1 or
+ version 2 of the SmartReflex IP.
+ V1 is the 65nm version used in OMAP3430.
+ V2 is the update for the 45nm version of the IP used in OMAP3630
+ and OMAP4430
Please note, that by default SmartReflex is only
- initialized. To enable the automatic voltage
- compensation for vdd mpu and vdd core from user space,
+ initialized and not enabled. To enable the automatic voltage
+ compensation for vdd mpu and vdd core from user space,
user must write 1 to
- /debug/voltage/vdd_<X>/smartreflex/autocomp,
- where X is mpu or core for OMAP3.
+ /debug/smartreflex/sr_<X>/autocomp,
+ where X is mpu_iva or core for OMAP3.
Optionally autocompensation can be enabled in the kernel
by default during system init via the enable_on_init flag
which an be passed as platform data to the smartreflex driver.
-config OMAP_SMARTREFLEX_CLASS3
+config POWER_AVS_OMAP_CLASS3
bool "Class 3 mode of Smartreflex Implementation"
- depends on OMAP_SMARTREFLEX && TWL4030_CORE
+ depends on POWER_AVS_OMAP && TWL4030_CORE
help
Say Y to enable Class 3 implementation of Smartreflex
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
index 0a6a482ec014..5be4d5def427 100644
--- a/arch/arm/plat-omap/include/plat/voltage.h
+++ b/arch/arm/plat-omap/include/plat/voltage.h
@@ -11,10 +11,29 @@
#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
#define __ARCH_ARM_OMAP_VOLTAGE_H
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal: The possible voltage value in uV
+ * @sr_efuse_offs: The offset of the efuse register(from system
+ * control module base address) from where to read
+ * the n-target value for the smartreflex module.
+ * @sr_errminlimit: Error min limit value for smartreflex. This value
+ * differs at differnet opp and thus is linked
+ * with voltage.
+ * @vp_errorgain: Error gain value for the voltage processor. This
+ * field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+ u32 volt_nominal;
+ u32 sr_efuse_offs;
+ u8 sr_errminlimit;
+ u8 vp_errgain;
+};
struct voltagedomain;
struct voltagedomain *voltdm_lookup(const char *name);
int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+ unsigned long volt);
#endif
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index e3a3b4956f08..70b4a979a6ff 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -310,3 +310,5 @@ config AB8500_BATTERY_THERM_ON_BATCTRL
Say Y to enable battery temperature measurements using
thermistor connected on BATCTRL ADC.
endif # POWER_SUPPLY
+
+source "drivers/power/avs/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b6b243416c0e..ee58afb1e71f 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -43,4 +43,5 @@ obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
+obj-$(CONFIG_POWER_AVS) += avs/
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig
new file mode 100644
index 000000000000..2a1008b61121
--- /dev/null
+++ b/drivers/power/avs/Kconfig
@@ -0,0 +1,12 @@
+menuconfig POWER_AVS
+ bool "Adaptive Voltage Scaling class support"
+ help
+ AVS is a power management technique which finely controls the
+ operating voltage of a device in order to optimize (i.e. reduce)
+ its power consumption.
+ At a given operating point the voltage is adapted depending on
+ static factors (chip manufacturing process) and dynamic factors
+ (temperature depending performance).
+ AVS is also called SmartReflex on OMAP devices.
+
+ Say Y here to enable Adaptive Voltage Scaling class support.
diff --git a/drivers/power/avs/Makefile b/drivers/power/avs/Makefile
new file mode 100644
index 000000000000..0843386a6c19
--- /dev/null
+++ b/drivers/power/avs/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_POWER_AVS_OMAP) += smartreflex.o
diff --git a/arch/arm/mach-omap2/smartreflex.c b/drivers/power/avs/smartreflex.c
index 008fbd7b9352..44efc6e202af 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -3,7 +3,7 @@
*
* Author: Thara Gopinath <thara@ti.com>
*
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2012 Texas Instruments, Inc.
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008 Nokia Corporation
@@ -25,39 +25,12 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
-
-#include "common.h"
-
-#include "pm.h"
-#include "smartreflex.h"
+#include <linux/power/smartreflex.h>
#define SMARTREFLEX_NAME_LEN 16
#define NVALUE_NAME_LEN 40
#define SR_DISABLE_TIMEOUT 200
-struct omap_sr {
- struct list_head node;
- struct platform_device *pdev;
- struct omap_sr_nvalue_table *nvalue_table;
- struct voltagedomain *voltdm;
- struct dentry *dbg_dir;
- unsigned int irq;
- int srid;
- int ip_type;
- int nvalue_count;
- bool autocomp_active;
- u32 clk_length;
- u32 err_weight;
- u32 err_minlimit;
- u32 err_maxlimit;
- u32 accum_data;
- u32 senn_avgweight;
- u32 senp_avgweight;
- u32 senp_mod;
- u32 senn_mod;
- void __iomem *base;
-};
-
/* sr_list contains all the instances of smartreflex module */
static LIST_HEAD(sr_list);
@@ -148,7 +121,7 @@ static irqreturn_t sr_interrupt(int irq, void *data)
}
if (sr_class->notify)
- sr_class->notify(sr_info->voltdm, status);
+ sr_class->notify(sr_info, status);
return IRQ_HANDLED;
}
@@ -207,7 +180,7 @@ static void sr_set_regfields(struct omap_sr *sr)
sr->err_weight = OMAP3430_SR_ERRWEIGHT;
sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
sr->accum_data = OMAP3430_SR_ACCUMDATA;
- if (!(strcmp(sr->voltdm->name, "mpu"))) {
+ if (!(strcmp(sr->name, "smartreflex_mpu_iva"))) {
sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
} else {
@@ -226,7 +199,7 @@ static void sr_start_vddautocomp(struct omap_sr *sr)
return;
}
- if (!sr_class->enable(sr->voltdm))
+ if (!sr_class->enable(sr))
sr->autocomp_active = true;
}
@@ -240,7 +213,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
}
if (sr->autocomp_active) {
- sr_class->disable(sr->voltdm, 1);
+ sr_class->disable(sr, 1);
sr->autocomp_active = false;
}
}
@@ -258,19 +231,13 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
*/
static int sr_late_init(struct omap_sr *sr_info)
{
- char *name;
struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
struct resource *mem;
int ret = 0;
if (sr_class->notify && sr_class->notify_flags && sr_info->irq) {
- name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
- if (name == NULL) {
- ret = -ENOMEM;
- goto error;
- }
ret = request_irq(sr_info->irq, sr_interrupt,
- 0, name, sr_info);
+ 0, sr_info->name, sr_info);
if (ret)
goto error;
disable_irq(sr_info->irq);
@@ -289,7 +256,6 @@ error:
dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
"interrupt handler. Smartreflex will"
"not function as desired\n", __func__);
- kfree(name);
kfree(sr_info);
return ret;
@@ -320,9 +286,9 @@ static void sr_v1_disable(struct omap_sr *sr)
* Wait for SR to be disabled.
* wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
*/
- omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
- ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
- timeout);
+ sr_test_cond_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
+ ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
+ timeout);
if (timeout >= SR_DISABLE_TIMEOUT)
dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
@@ -365,9 +331,9 @@ static void sr_v2_disable(struct omap_sr *sr)
* Wait for SR to be disabled.
* wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
*/
- omap_test_timeout((sr_read_reg(sr, IRQSTATUS) &
- IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
- timeout);
+ sr_test_cond_timeout((sr_read_reg(sr, IRQSTATUS) &
+ IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
+ timeout);
if (timeout >= SR_DISABLE_TIMEOUT)
dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
@@ -378,22 +344,23 @@ static void sr_v2_disable(struct omap_sr *sr)
sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
}
-static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
+static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
+ struct omap_sr *sr, u32 efuse_offs)
{
int i;
if (!sr->nvalue_table) {
dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
__func__);
- return 0;
+ return NULL;
}
for (i = 0; i < sr->nvalue_count; i++) {
if (sr->nvalue_table[i].efuse_offs == efuse_offs)
- return sr->nvalue_table[i].nvalue;
+ return &sr->nvalue_table[i];
}
- return 0;
+ return NULL;
}
/* Public Functions */
@@ -419,8 +386,7 @@ int sr_configure_errgen(struct voltagedomain *voltdm)
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return PTR_ERR(sr);
}
@@ -487,8 +453,7 @@ int sr_disable_errgen(struct voltagedomain *voltdm)
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return PTR_ERR(sr);
}
@@ -538,8 +503,7 @@ int sr_configure_minmax(struct voltagedomain *voltdm)
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return PTR_ERR(sr);
}
@@ -620,12 +584,11 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
{
struct omap_volt_data *volt_data;
struct omap_sr *sr = _sr_lookup(voltdm);
- u32 nvalue_reciprocal;
+ struct omap_sr_nvalue_table *nvalue_row;
int ret;
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return PTR_ERR(sr);
}
@@ -637,16 +600,16 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
return PTR_ERR(volt_data);
}
- nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
+ nvalue_row = sr_retrieve_nvalue_row(sr, volt_data->sr_efuse_offs);
- if (!nvalue_reciprocal) {
- dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n",
- __func__, volt);
+ if (!nvalue_row) {
+ dev_warn(&sr->pdev->dev, "%s: failure getting SR data for this voltage %ld\n",
+ __func__, volt);
return -ENODATA;
}
/* errminlimit is opp dependent and hence linked to voltage */
- sr->err_minlimit = volt_data->sr_errminlimit;
+ sr->err_minlimit = nvalue_row->errminlimit;
pm_runtime_get_sync(&sr->pdev->dev);
@@ -655,11 +618,11 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
return 0;
/* Configure SR */
- ret = sr_class->configure(voltdm);
+ ret = sr_class->configure(sr);
if (ret)
return ret;
- sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
+ sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue);
/* SRCONFIG - enable SR */
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
@@ -678,8 +641,7 @@ void sr_disable(struct voltagedomain *voltdm)
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return;
}
@@ -759,8 +721,7 @@ void omap_sr_enable(struct voltagedomain *voltdm)
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return;
}
@@ -773,7 +734,7 @@ void omap_sr_enable(struct voltagedomain *voltdm)
return;
}
- sr_class->enable(voltdm);
+ sr_class->enable(sr);
}
/**
@@ -792,8 +753,7 @@ void omap_sr_disable(struct voltagedomain *voltdm)
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return;
}
@@ -806,7 +766,7 @@ void omap_sr_disable(struct voltagedomain *voltdm)
return;
}
- sr_class->disable(voltdm, 0);
+ sr_class->disable(sr, 0);
}
/**
@@ -825,8 +785,7 @@ void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, voltdm->name);
+ pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
return;
}
@@ -839,7 +798,7 @@ void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
return;
}
- sr_class->disable(voltdm, 1);
+ sr_class->disable(sr, 1);
}
/**
@@ -911,9 +870,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
struct omap_sr_data *pdata = pdev->dev.platform_data;
struct resource *mem, *irq;
struct dentry *nvalue_dir;
- struct omap_volt_data *volt_data;
int i, ret = 0;
- char *name;
sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
if (!sr_info) {
@@ -950,6 +907,14 @@ static int __init omap_sr_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
pm_runtime_irq_safe(&pdev->dev);
+ sr_info->name = kasprintf(GFP_KERNEL, "%s", pdata->name);
+ if (!sr_info->name) {
+ dev_err(&pdev->dev, "%s: Unable to alloc SR instance name\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_release_region;
+ }
+
sr_info->pdev = pdev;
sr_info->srid = pdev->id;
sr_info->voltdm = pdata->voltdm;
@@ -997,20 +962,12 @@ static int __init omap_sr_probe(struct platform_device *pdev)
}
}
- name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
- if (!name) {
- dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n",
- __func__);
- ret = -ENOMEM;
- goto err_iounmap;
- }
- sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
- kfree(name);
+ sr_info->dbg_dir = debugfs_create_dir(sr_info->name, sr_dbg_dir);
if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
ret = PTR_ERR(sr_info->dbg_dir);
- goto err_iounmap;
+ goto err_free_name;
}
(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
@@ -1019,8 +976,6 @@ static int __init omap_sr_probe(struct platform_device *pdev)
&sr_info->err_weight);
(void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
&sr_info->err_maxlimit);
- (void) debugfs_create_x32("errminlimit", S_IRUGO, sr_info->dbg_dir,
- &sr_info->err_minlimit);
nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
if (IS_ERR_OR_NULL(nvalue_dir)) {
@@ -1030,12 +985,10 @@ static int __init omap_sr_probe(struct platform_device *pdev)
goto err_debugfs;
}
- omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
- if (!volt_data) {
- dev_warn(&pdev->dev, "%s: No Voltage table for the"
- " corresponding vdd vdd_%s. Cannot create debugfs"
- "entries for n-values\n",
- __func__, sr_info->voltdm->name);
+ if (sr_info->nvalue_count == 0 || !sr_info->nvalue_table) {
+ dev_warn(&pdev->dev, "%s: %s: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values\n",
+ __func__, sr_info->name);
+
ret = -ENODATA;
goto err_debugfs;
}
@@ -1043,16 +996,23 @@ static int __init omap_sr_probe(struct platform_device *pdev)
for (i = 0; i < sr_info->nvalue_count; i++) {
char name[NVALUE_NAME_LEN + 1];
- snprintf(name, sizeof(name), "volt_%d",
- volt_data[i].volt_nominal);
+ snprintf(name, sizeof(name), "volt_%lu",
+ sr_info->nvalue_table[i].volt_nominal);
(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
&(sr_info->nvalue_table[i].nvalue));
+ snprintf(name, sizeof(name), "errminlimit_%lu",
+ sr_info->nvalue_table[i].volt_nominal);
+ (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
+ &(sr_info->nvalue_table[i].errminlimit));
+
}
return ret;
err_debugfs:
debugfs_remove_recursive(sr_info->dbg_dir);
+err_free_name:
+ kfree(sr_info->name);
err_iounmap:
list_del(&sr_info->node);
iounmap(sr_info->base);
@@ -1089,6 +1049,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
list_del(&sr_info->node);
iounmap(sr_info->base);
+ kfree(sr_info->name);
kfree(sr_info);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(mem->start, resource_size(mem));
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 979d6eed9a0f..5ceb1cd50195 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -60,7 +60,7 @@ config W1_MASTER_GPIO
config HDQ_MASTER_OMAP
tristate "OMAP HDQ driver"
- depends on SOC_OMAP2430 || ARCH_OMAP3
+ depends on ARCH_OMAP2PLUS
help
Say Y here if you want support for the 1-wire or HDQ Interface
on an OMAP processor.
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 5ef385bfed18..291897c881be 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -1,7 +1,7 @@
/*
* drivers/w1/masters/omap_hdq.c
*
- * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007,2012 Texas Instruments, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -14,9 +14,9 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/err.h>
-#include <linux/clk.h>
#include <linux/io.h>
#include <linux/sched.h>
+#include <linux/pm_runtime.h>
#include <asm/irq.h>
#include <mach/hardware.h>
@@ -61,8 +61,6 @@ struct hdq_data {
/* lock status update */
struct mutex hdq_mutex;
int hdq_usecount;
- struct clk *hdq_ick;
- struct clk *hdq_fck;
u8 hdq_irqstatus;
/* device lock */
spinlock_t hdq_spinlock;
@@ -102,20 +100,20 @@ static struct w1_bus_master omap_w1_master = {
/* HDQ register I/O routines */
static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset)
{
- return __raw_readb(hdq_data->hdq_base + offset);
+ return __raw_readl(hdq_data->hdq_base + offset);
}
static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val)
{
- __raw_writeb(val, hdq_data->hdq_base + offset);
+ __raw_writel(val, hdq_data->hdq_base + offset);
}
static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
u8 val, u8 mask)
{
- u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask)
+ u8 new_val = (__raw_readl(hdq_data->hdq_base + offset) & ~mask)
| (val & mask);
- __raw_writeb(new_val, hdq_data->hdq_base + offset);
+ __raw_writel(new_val, hdq_data->hdq_base + offset);
return new_val;
}
@@ -419,17 +417,8 @@ static int omap_hdq_get(struct hdq_data *hdq_data)
hdq_data->hdq_usecount++;
try_module_get(THIS_MODULE);
if (1 == hdq_data->hdq_usecount) {
- if (clk_enable(hdq_data->hdq_ick)) {
- dev_dbg(hdq_data->dev, "Can not enable ick\n");
- ret = -ENODEV;
- goto clk_err;
- }
- if (clk_enable(hdq_data->hdq_fck)) {
- dev_dbg(hdq_data->dev, "Can not enable fck\n");
- clk_disable(hdq_data->hdq_ick);
- ret = -ENODEV;
- goto clk_err;
- }
+
+ pm_runtime_get_sync(hdq_data->dev);
/* make sure HDQ is out of reset */
if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) &
@@ -450,9 +439,6 @@ static int omap_hdq_get(struct hdq_data *hdq_data)
}
}
-clk_err:
- clk_put(hdq_data->hdq_ick);
- clk_put(hdq_data->hdq_fck);
out:
mutex_unlock(&hdq_data->hdq_mutex);
rtn:
@@ -475,10 +461,8 @@ static int omap_hdq_put(struct hdq_data *hdq_data)
} else {
hdq_data->hdq_usecount--;
module_put(THIS_MODULE);
- if (0 == hdq_data->hdq_usecount) {
- clk_disable(hdq_data->hdq_ick);
- clk_disable(hdq_data->hdq_fck);
- }
+ if (0 == hdq_data->hdq_usecount)
+ pm_runtime_put_sync(hdq_data->dev);
}
mutex_unlock(&hdq_data->hdq_mutex);
@@ -591,35 +575,11 @@ static int __devinit omap_hdq_probe(struct platform_device *pdev)
goto err_ioremap;
}
- /* get interface & functional clock objects */
- hdq_data->hdq_ick = clk_get(&pdev->dev, "ick");
- if (IS_ERR(hdq_data->hdq_ick)) {
- dev_dbg(&pdev->dev, "Can't get HDQ ick clock object\n");
- ret = PTR_ERR(hdq_data->hdq_ick);
- goto err_ick;
- }
-
- hdq_data->hdq_fck = clk_get(&pdev->dev, "fck");
- if (IS_ERR(hdq_data->hdq_fck)) {
- dev_dbg(&pdev->dev, "Can't get HDQ fck clock object\n");
- ret = PTR_ERR(hdq_data->hdq_fck);
- goto err_fck;
- }
-
hdq_data->hdq_usecount = 0;
mutex_init(&hdq_data->hdq_mutex);
- if (clk_enable(hdq_data->hdq_ick)) {
- dev_dbg(&pdev->dev, "Can not enable ick\n");
- ret = -ENODEV;
- goto err_intfclk;
- }
-
- if (clk_enable(hdq_data->hdq_fck)) {
- dev_dbg(&pdev->dev, "Can not enable fck\n");
- ret = -ENODEV;
- goto err_fnclk;
- }
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION);
dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n",
@@ -641,9 +601,7 @@ static int __devinit omap_hdq_probe(struct platform_device *pdev)
omap_hdq_break(hdq_data);
- /* don't clock the HDQ until it is needed */
- clk_disable(hdq_data->hdq_ick);
- clk_disable(hdq_data->hdq_fck);
+ pm_runtime_put_sync(&pdev->dev);
omap_w1_master.data = hdq_data;
@@ -655,20 +613,11 @@ static int __devinit omap_hdq_probe(struct platform_device *pdev)
return 0;
-err_w1:
err_irq:
- clk_disable(hdq_data->hdq_fck);
-
-err_fnclk:
- clk_disable(hdq_data->hdq_ick);
-
-err_intfclk:
- clk_put(hdq_data->hdq_fck);
-
-err_fck:
- clk_put(hdq_data->hdq_ick);
+ pm_runtime_put_sync(&pdev->dev);
+err_w1:
+ pm_runtime_disable(&pdev->dev);
-err_ick:
iounmap(hdq_data->hdq_base);
err_ioremap:
@@ -696,8 +645,7 @@ static int omap_hdq_remove(struct platform_device *pdev)
mutex_unlock(&hdq_data->hdq_mutex);
/* remove module dependency */
- clk_put(hdq_data->hdq_ick);
- clk_put(hdq_data->hdq_fck);
+ pm_runtime_disable(&pdev->dev);
free_irq(INT_24XX_HDQ_IRQ, hdq_data);
platform_set_drvdata(pdev, NULL);
iounmap(hdq_data->hdq_base);
diff --git a/arch/arm/mach-omap2/smartreflex.h b/include/linux/power/smartreflex.h
index 5809141171f8..3101e62a1213 100644
--- a/arch/arm/mach-omap2/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -17,12 +17,13 @@
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
-#define __ASM_ARM_OMAP_SMARTREFLEX_H
+#ifndef __POWER_SMARTREFLEX_H
+#define __POWER_SMARTREFLEX_H
+#include <linux/types.h>
#include <linux/platform_device.h>
-
-#include "voltage.h"
+#include <linux/delay.h>
+#include <plat/voltage.h>
/*
* Different Smartreflex IPs version. The v1 is the 65nm version used in
@@ -142,6 +143,51 @@
#define OMAP3430_SR_ERRWEIGHT 0x04
#define OMAP3430_SR_ERRMAXLIMIT 0x02
+struct omap_sr {
+ char *name;
+ struct list_head node;
+ struct platform_device *pdev;
+ struct omap_sr_nvalue_table *nvalue_table;
+ struct voltagedomain *voltdm;
+ struct dentry *dbg_dir;
+ unsigned int irq;
+ int srid;
+ int ip_type;
+ int nvalue_count;
+ bool autocomp_active;
+ u32 clk_length;
+ u32 err_weight;
+ u32 err_minlimit;
+ u32 err_maxlimit;
+ u32 accum_data;
+ u32 senn_avgweight;
+ u32 senp_avgweight;
+ u32 senp_mod;
+ u32 senn_mod;
+ void __iomem *base;
+};
+
+/**
+ * test_cond_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed. To use, define some integer @index in the
+ * calling code. After running, if @index == @timeout, then the loop has
+ * timed out.
+ *
+ * Copied from omap_test_timeout */
+#define sr_test_cond_timeout(cond, timeout, index) \
+({ \
+ for (index = 0; index < timeout; index++) { \
+ if (cond) \
+ break; \
+ udelay(1); \
+ } \
+})
+
/**
* struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
* pmic specific info to smartreflex driver
@@ -161,7 +207,7 @@ struct omap_smartreflex_dev_attr {
const char *sensor_voltdm_name;
};
-#ifdef CONFIG_OMAP_SMARTREFLEX
+#ifdef CONFIG_POWER_AVS_OMAP
/*
* The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
* The smartreflex class driver should pass the class type.
@@ -186,10 +232,10 @@ struct omap_smartreflex_dev_attr {
* based decisions.
*/
struct omap_sr_class_data {
- int (*enable)(struct voltagedomain *voltdm);
- int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
- int (*configure)(struct voltagedomain *voltdm);
- int (*notify)(struct voltagedomain *voltdm, u32 status);
+ int (*enable)(struct omap_sr *sr);
+ int (*disable)(struct omap_sr *sr, int is_volt_reset);
+ int (*configure)(struct omap_sr *sr);
+ int (*notify)(struct omap_sr *sr, u32 status);
u8 notify_flags;
u8 class_type;
};
@@ -197,17 +243,22 @@ struct omap_sr_class_data {
/**
* struct omap_sr_nvalue_table - Smartreflex n-target value info
*
- * @efuse_offs: The offset of the efuse where n-target values are stored.
- * @nvalue: The n-target value.
+ * @efuse_offs: The offset of the efuse where n-target values are stored.
+ * @nvalue: The n-target value.
+ * @errminlimit: The value of the ERRMINLIMIT bitfield for this n-target
+ * @volt_nominal: microvolts DC that the VDD is initially programmed to
*/
struct omap_sr_nvalue_table {
u32 efuse_offs;
u32 nvalue;
+ u32 errminlimit;
+ unsigned long volt_nominal;
};
/**
* struct omap_sr_data - Smartreflex platform data.
*
+ * @name: instance name
* @ip_type: Smartreflex IP type.
* @senp_mod: SENPENABLE value for the sr
* @senn_mod: SENNENABLE value for sr
@@ -219,6 +270,7 @@ struct omap_sr_nvalue_table {
* @voltdm: Pointer to the voltage domain associated with the SR
*/
struct omap_sr_data {
+ const char *name;
int ip_type;
u32 senp_mod;
u32 senn_mod;