usb: phy: remove phy-msm-usb.c

No Qualcomm SoC requires the "phy-msm-usb.c" USB phy driver support
any more, so remove the code.

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 0 insertions, 2102 deletions

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index aff702c0eb9f..f5775e5c9f52 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -137,21 +137,6 @@ config USB_ISP1301
 	  To compile this driver as a module, choose M here: the
 	  module will be called phy-isp1301.
 
-config USB_MSM_OTG
-	tristate "Qualcomm on-chip USB OTG controller support"
-	depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST)
-	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
-	depends on RESET_CONTROLLER
-	select USB_PHY
-	help
-	  Enable this to support the USB OTG transceiver on Qualcomm chips. It
-	  handles PHY initialization, clock management, and workarounds
-	  required after resetting the hardware and power management.
-	  This driver is required even for peripheral only or host only
-	  mode configurations.
-	  This driver is not supported on boards like trout which
-	  has an external PHY.
-
 config USB_QCOM_8X16_PHY
 	tristate "Qualcomm APQ8016/MSM8916 on-chip USB PHY controller support"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index e7c9ca8cafb0..61013f38abbe 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
 obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
 obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
 obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
-obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
 obj-$(CONFIG_USB_QCOM_8X16_PHY)	+= phy-qcom-8x16-usb.o
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
 obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
deleted file mode 100644
index 8bc3403a1295..000000000000
--- a/drivers/usb/phy/phy-msm-usb.c
+++ /dev/null
@@ -1,2086 +0,0 @@
-/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/extcon.h>
-#include <linux/gpio/consumer.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/uaccess.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/pm_runtime.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/reboot.h>
-#include <linux/reset.h>
-#include <linux/types.h>
-#include <linux/usb/otg.h>
-
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/of.h>
-#include <linux/usb/ulpi.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/hcd.h>
-#include <linux/usb/msm_hsusb_hw.h>
-#include <linux/regulator/consumer.h>
-
-/**
- * OTG control
- *
- * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
- *                      only configuration.
- * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
- * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
- * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
- *
- */
-enum otg_control_type {
-	OTG_NO_CONTROL = 0,
-	OTG_PHY_CONTROL,
-	OTG_PMIC_CONTROL,
-	OTG_USER_CONTROL,
-};
-
-/**
- * PHY used in
- *
- * INVALID_PHY			Unsupported PHY
- * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
- * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
- *
- */
-enum msm_usb_phy_type {
-	INVALID_PHY = 0,
-	CI_45NM_INTEGRATED_PHY,
-	SNPS_28NM_INTEGRATED_PHY,
-};
-
-#define IDEV_CHG_MAX	1500
-#define IUNIT		100
-
-/**
- * Different states involved in USB charger detection.
- *
- * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
- *                              process is not yet started.
- * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
- * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
- * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
- *                              between SDP and DCP/CDP).
- * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
- *                              between DCP and CDP).
- * USB_CHG_STATE_DETECTED	USB charger type is determined.
- *
- */
-enum usb_chg_state {
-	USB_CHG_STATE_UNDEFINED = 0,
-	USB_CHG_STATE_WAIT_FOR_DCD,
-	USB_CHG_STATE_DCD_DONE,
-	USB_CHG_STATE_PRIMARY_DONE,
-	USB_CHG_STATE_SECONDARY_DONE,
-	USB_CHG_STATE_DETECTED,
-};
-
-/**
- * USB charger types
- *
- * USB_INVALID_CHARGER	Invalid USB charger.
- * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
- *                      on USB2.0 compliant host/hub.
- * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
- * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
- *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
- *
- */
-enum usb_chg_type {
-	USB_INVALID_CHARGER = 0,
-	USB_SDP_CHARGER,
-	USB_DCP_CHARGER,
-	USB_CDP_CHARGER,
-};
-
-/**
- * struct msm_otg_platform_data - platform device data
- *              for msm_otg driver.
- * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
- *              "do not overwrite default vaule at this address".
- * @phy_init_sz: PHY configuration sequence size.
- * @vbus_power: VBUS power on/off routine.
- * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
- * @mode: Supported mode (OTG/peripheral/host).
- * @otg_control: OTG switch controlled by user/Id pin
- */
-struct msm_otg_platform_data {
-	int *phy_init_seq;
-	int phy_init_sz;
-	void (*vbus_power)(bool on);
-	unsigned power_budget;
-	enum usb_dr_mode mode;
-	enum otg_control_type otg_control;
-	enum msm_usb_phy_type phy_type;
-	void (*setup_gpio)(enum usb_otg_state state);
-};
-
-/**
- * struct msm_otg: OTG driver data. Shared by HCD and DCD.
- * @otg: USB OTG Transceiver structure.
- * @pdata: otg device platform data.
- * @irq: IRQ number assigned for HSUSB controller.
- * @clk: clock struct of usb_hs_clk.
- * @pclk: clock struct of usb_hs_pclk.
- * @core_clk: clock struct of usb_hs_core_clk.
- * @regs: ioremapped register base address.
- * @inputs: OTG state machine inputs(Id, SessValid etc).
- * @sm_work: OTG state machine work.
- * @in_lpm: indicates low power mode (LPM) state.
- * @async_int: Async interrupt arrived.
- * @cur_power: The amount of mA available from downstream port.
- * @chg_work: Charger detection work.
- * @chg_state: The state of charger detection process.
- * @chg_type: The type of charger attached.
- * @dcd_retires: The retry count used to track Data contact
- *               detection process.
- * @manual_pullup: true if VBUS is not routed to USB controller/phy
- *	and controller driver therefore enables pull-up explicitly before
- *	starting controller using usbcmd run/stop bit.
- * @vbus: VBUS signal state trakining, using extcon framework
- * @id: ID signal state trakining, using extcon framework
- * @switch_gpio: Descriptor for GPIO used to control external Dual
- *               SPDT USB Switch.
- * @reboot: Used to inform the driver to route USB D+/D- line to Device
- *	    connector
- */
-struct msm_otg {
-	struct usb_phy phy;
-	struct msm_otg_platform_data *pdata;
-	int irq;
-	struct clk *clk;
-	struct clk *pclk;
-	struct clk *core_clk;
-	void __iomem *regs;
-#define ID		0
-#define B_SESS_VLD	1
-	unsigned long inputs;
-	struct work_struct sm_work;
-	atomic_t in_lpm;
-	int async_int;
-	unsigned cur_power;
-	int phy_number;
-	struct delayed_work chg_work;
-	enum usb_chg_state chg_state;
-	enum usb_chg_type chg_type;
-	u8 dcd_retries;
-	struct regulator *v3p3;
-	struct regulator *v1p8;
-	struct regulator *vddcx;
-	struct regulator_bulk_data supplies[3];
-
-	struct reset_control *phy_rst;
-	struct reset_control *link_rst;
-	int vdd_levels[3];
-
-	bool manual_pullup;
-
-	struct gpio_desc *switch_gpio;
-	struct notifier_block reboot;
-};
-
-#define MSM_USB_BASE	(motg->regs)
-#define DRIVER_NAME	"msm_otg"
-
-#define ULPI_IO_TIMEOUT_USEC	(10 * 1000)
-#define LINK_RESET_TIMEOUT_USEC	(250 * 1000)
-
-#define USB_PHY_3P3_VOL_MIN	3050000 /* uV */
-#define USB_PHY_3P3_VOL_MAX	3300000 /* uV */
-#define USB_PHY_3P3_HPM_LOAD	50000	/* uA */
-#define USB_PHY_3P3_LPM_LOAD	4000	/* uA */
-
-#define USB_PHY_1P8_VOL_MIN	1800000 /* uV */
-#define USB_PHY_1P8_VOL_MAX	1800000 /* uV */
-#define USB_PHY_1P8_HPM_LOAD	50000	/* uA */
-#define USB_PHY_1P8_LPM_LOAD	4000	/* uA */
-
-#define USB_PHY_VDD_DIG_VOL_MIN	1000000 /* uV */
-#define USB_PHY_VDD_DIG_VOL_MAX	1320000 /* uV */
-#define USB_PHY_SUSP_DIG_VOL	500000  /* uV */
-
-enum vdd_levels {
-	VDD_LEVEL_NONE = 0,
-	VDD_LEVEL_MIN,
-	VDD_LEVEL_MAX,
-};
-
-static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
-{
-	int ret = 0;
-
-	if (init) {
-		ret = regulator_set_voltage(motg->vddcx,
-				motg->vdd_levels[VDD_LEVEL_MIN],
-				motg->vdd_levels[VDD_LEVEL_MAX]);
-		if (ret) {
-			dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
-			return ret;
-		}
-
-		ret = regulator_enable(motg->vddcx);
-		if (ret)
-			dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n");
-	} else {
-		ret = regulator_set_voltage(motg->vddcx, 0,
-				motg->vdd_levels[VDD_LEVEL_MAX]);
-		if (ret)
-			dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
-		ret = regulator_disable(motg->vddcx);
-		if (ret)
-			dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
-	}
-
-	return ret;
-}
-
-static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
-{
-	int rc = 0;
-
-	if (init) {
-		rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN,
-				USB_PHY_3P3_VOL_MAX);
-		if (rc) {
-			dev_err(motg->phy.dev, "Cannot set v3p3 voltage\n");
-			goto exit;
-		}
-		rc = regulator_enable(motg->v3p3);
-		if (rc) {
-			dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n");
-			goto exit;
-		}
-		rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN,
-				USB_PHY_1P8_VOL_MAX);
-		if (rc) {
-			dev_err(motg->phy.dev, "Cannot set v1p8 voltage\n");
-			goto disable_3p3;
-		}
-		rc = regulator_enable(motg->v1p8);
-		if (rc) {
-			dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n");
-			goto disable_3p3;
-		}
-
-		return 0;
-	}
-
-	regulator_disable(motg->v1p8);
-disable_3p3:
-	regulator_disable(motg->v3p3);
-exit:
-	return rc;
-}
-
-static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on)
-{
-	int ret = 0;
-
-	if (on) {
-		ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_HPM_LOAD);
-		if (ret < 0) {
-			pr_err("Could not set HPM for v1p8\n");
-			return ret;
-		}
-		ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_HPM_LOAD);
-		if (ret < 0) {
-			pr_err("Could not set HPM for v3p3\n");
-			regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
-			return ret;
-		}
-	} else {
-		ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
-		if (ret < 0)
-			pr_err("Could not set LPM for v1p8\n");
-		ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_LPM_LOAD);
-		if (ret < 0)
-			pr_err("Could not set LPM for v3p3\n");
-	}
-
-	pr_debug("reg (%s)\n", on ? "HPM" : "LPM");
-	return ret < 0 ? ret : 0;
-}
-
-static int ulpi_read(struct usb_phy *phy, u32 reg)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	int cnt = 0;
-
-	/* initiate read operation */
-	writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
-	       USB_ULPI_VIEWPORT);
-
-	/* wait for completion */
-	while (cnt < ULPI_IO_TIMEOUT_USEC) {
-		if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
-			break;
-		udelay(1);
-		cnt++;
-	}
-
-	if (cnt >= ULPI_IO_TIMEOUT_USEC) {
-		dev_err(phy->dev, "ulpi_read: timeout %08x\n",
-			readl(USB_ULPI_VIEWPORT));
-		return -ETIMEDOUT;
-	}
-	return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
-}
-
-static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	int cnt = 0;
-
-	/* initiate write operation */
-	writel(ULPI_RUN | ULPI_WRITE |
-	       ULPI_ADDR(reg) | ULPI_DATA(val),
-	       USB_ULPI_VIEWPORT);
-
-	/* wait for completion */
-	while (cnt < ULPI_IO_TIMEOUT_USEC) {
-		if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
-			break;
-		udelay(1);
-		cnt++;
-	}
-
-	if (cnt >= ULPI_IO_TIMEOUT_USEC) {
-		dev_err(phy->dev, "ulpi_write: timeout\n");
-		return -ETIMEDOUT;
-	}
-	return 0;
-}
-
-static struct usb_phy_io_ops msm_otg_io_ops = {
-	.read = ulpi_read,
-	.write = ulpi_write,
-};
-
-static void ulpi_init(struct msm_otg *motg)
-{
-	struct msm_otg_platform_data *pdata = motg->pdata;
-	int *seq = pdata->phy_init_seq, idx;
-	u32 addr = ULPI_EXT_VENDOR_SPECIFIC;
-
-	for (idx = 0; idx < pdata->phy_init_sz; idx++) {
-		if (seq[idx] == -1)
-			continue;
-
-		dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n",
-				seq[idx], addr + idx);
-		ulpi_write(&motg->phy, seq[idx], addr + idx);
-	}
-}
-
-static int msm_phy_notify_disconnect(struct usb_phy *phy,
-				   enum usb_device_speed speed)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	int val;
-
-	if (motg->manual_pullup) {
-		val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL;
-		usb_phy_io_write(phy, val, ULPI_CLR(ULPI_MISC_A));
-	}
-
-	/*
-	 * Put the transceiver in non-driving mode. Otherwise host
-	 * may not detect soft-disconnection.
-	 */
-	val = ulpi_read(phy, ULPI_FUNC_CTRL);
-	val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-	val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-	ulpi_write(phy, val, ULPI_FUNC_CTRL);
-
-	return 0;
-}
-
-static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
-{
-	int ret;
-
-	if (assert)
-		ret = reset_control_assert(motg->link_rst);
-	else
-		ret = reset_control_deassert(motg->link_rst);
-
-	if (ret)
-		dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
-			assert ? "assert" : "deassert");
-
-	return ret;
-}
-
-static int msm_otg_phy_clk_reset(struct msm_otg *motg)
-{
-	int ret = 0;
-
-	if (motg->phy_rst)
-		ret = reset_control_reset(motg->phy_rst);
-
-	if (ret)
-		dev_err(motg->phy.dev, "usb phy clk reset failed\n");
-
-	return ret;
-}
-
-static int msm_link_reset(struct msm_otg *motg)
-{
-	u32 val;
-	int ret;
-
-	ret = msm_otg_link_clk_reset(motg, 1);
-	if (ret)
-		return ret;
-
-	/* wait for 1ms delay as suggested in HPG. */
-	usleep_range(1000, 1200);
-
-	ret = msm_otg_link_clk_reset(motg, 0);
-	if (ret)
-		return ret;
-
-	if (motg->phy_number)
-		writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
-
-	/* put transceiver in serial mode as part of reset */
-	val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
-	writel(val | PORTSC_PTS_SERIAL, USB_PORTSC);
-
-	return 0;
-}
-
-static int msm_otg_reset(struct usb_phy *phy)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	int cnt = 0;
-
-	writel(USBCMD_RESET, USB_USBCMD);
-	while (cnt < LINK_RESET_TIMEOUT_USEC) {
-		if (!(readl(USB_USBCMD) & USBCMD_RESET))
-			break;
-		udelay(1);
-		cnt++;
-	}
-	if (cnt >= LINK_RESET_TIMEOUT_USEC)
-		return -ETIMEDOUT;
-
-	/* select ULPI phy and clear other status/control bits in PORTSC */
-	writel(PORTSC_PTS_ULPI, USB_PORTSC);
-
-	writel(0x0, USB_AHBBURST);
-	writel(0x08, USB_AHBMODE);
-
-	if (motg->phy_number)
-		writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
-	return 0;
-}
-
-static void msm_phy_reset(struct msm_otg *motg)
-{
-	void __iomem *addr;
-
-	if (motg->pdata->phy_type != SNPS_28NM_INTEGRATED_PHY) {
-		msm_otg_phy_clk_reset(motg);
-		return;
-	}
-
-	addr = USB_PHY_CTRL;
-	if (motg->phy_number)
-		addr = USB_PHY_CTRL2;
-
-	/* Assert USB PHY_POR */
-	writel(readl(addr) | PHY_POR_ASSERT, addr);
-
-	/*
-	 * wait for minimum 10 microseconds as suggested in HPG.
-	 * Use a slightly larger value since the exact value didn't
-	 * work 100% of the time.
-	 */
-	udelay(12);
-
-	/* Deassert USB PHY_POR */
-	writel(readl(addr) & ~PHY_POR_ASSERT, addr);
-}
-
-static int msm_usb_reset(struct usb_phy *phy)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	int ret;
-
-	if (!IS_ERR(motg->core_clk))
-		clk_prepare_enable(motg->core_clk);
-
-	ret = msm_link_reset(motg);
-	if (ret) {
-		dev_err(phy->dev, "phy_reset failed\n");
-		return ret;
-	}
-
-	ret = msm_otg_reset(&motg->phy);
-	if (ret) {
-		dev_err(phy->dev, "link reset failed\n");
-		return ret;
-	}
-
-	msleep(100);
-
-	/* Reset USB PHY after performing USB Link RESET */
-	msm_phy_reset(motg);
-
-	if (!IS_ERR(motg->core_clk))
-		clk_disable_unprepare(motg->core_clk);
-
-	return 0;
-}
-
-static int msm_phy_init(struct usb_phy *phy)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	struct msm_otg_platform_data *pdata = motg->pdata;
-	u32 val, ulpi_val = 0;
-
-	/* Program USB PHY Override registers. */
-	ulpi_init(motg);
-
-	/*
-	 * It is recommended in HPG to reset USB PHY after programming
-	 * USB PHY Override registers.
-	 */
-	msm_phy_reset(motg);
-
-	if (pdata->otg_control == OTG_PHY_CONTROL) {
-		val = readl(USB_OTGSC);
-		if (pdata->mode == USB_DR_MODE_OTG) {
-			ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
-			val |= OTGSC_IDIE | OTGSC_BSVIE;
-		} else if (pdata->mode == USB_DR_MODE_PERIPHERAL) {
-			ulpi_val = ULPI_INT_SESS_VALID;
-			val |= OTGSC_BSVIE;
-		}
-		writel(val, USB_OTGSC);
-		ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_RISE);
-		ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL);
-	}
-
-	if (motg->manual_pullup) {
-		val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT;
-		ulpi_write(phy, val, ULPI_SET(ULPI_MISC_A));
-
-		val = readl(USB_GENCONFIG_2);
-		val |= GENCONFIG_2_SESS_VLD_CTRL_EN;
-		writel(val, USB_GENCONFIG_2);
-
-		val = readl(USB_USBCMD);
-		val |= USBCMD_SESS_VLD_CTRL;
-		writel(val, USB_USBCMD);
-
-		val = ulpi_read(phy, ULPI_FUNC_CTRL);
-		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-		val |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
-		ulpi_write(phy, val, ULPI_FUNC_CTRL);
-	}
-
-	if (motg->phy_number)
-		writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
-
-	return 0;
-}
-
-#define PHY_SUSPEND_TIMEOUT_USEC	(500 * 1000)
-#define PHY_RESUME_TIMEOUT_USEC	(100 * 1000)
-
-#ifdef CONFIG_PM
-
-static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high)
-{
-	int max_vol = motg->vdd_levels[VDD_LEVEL_MAX];
-	int min_vol;
-	int ret;
-
-	if (high)
-		min_vol = motg->vdd_levels[VDD_LEVEL_MIN];
-	else
-		min_vol = motg->vdd_levels[VDD_LEVEL_NONE];
-
-	ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol);
-	if (ret) {
-		pr_err("Cannot set vddcx voltage\n");
-		return ret;
-	}
-
-	pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
-
-	return ret;
-}
-
-static int msm_otg_suspend(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	struct usb_bus *bus = phy->otg->host;
-	struct msm_otg_platform_data *pdata = motg->pdata;
-	void __iomem *addr;
-	int cnt = 0;
-
-	if (atomic_read(&motg->in_lpm))
-		return 0;
-
-	disable_irq(motg->irq);
-	/*
-	 * Chipidea 45-nm PHY suspend sequence:
-	 *
-	 * Interrupt Latch Register auto-clear feature is not present
-	 * in all PHY versions. Latch register is clear on read type.
-	 * Clear latch register to avoid spurious wakeup from
-	 * low power mode (LPM).
-	 *
-	 * PHY comparators are disabled when PHY enters into low power
-	 * mode (LPM). Keep PHY comparators ON in LPM only when we expect
-	 * VBUS/Id notifications from USB PHY. Otherwise turn off USB
-	 * PHY comparators. This save significant amount of power.
-	 *
-	 * PLL is not turned off when PHY enters into low power mode (LPM).
-	 * Disable PLL for maximum power savings.
-	 */
-
-	if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) {
-		ulpi_read(phy, 0x14);
-		if (pdata->otg_control == OTG_PHY_CONTROL)
-			ulpi_write(phy, 0x01, 0x30);
-		ulpi_write(phy, 0x08, 0x09);
-	}
-
-	/*
-	 * PHY may take some time or even fail to enter into low power
-	 * mode (LPM). Hence poll for 500 msec and reset the PHY and link
-	 * in failure case.
-	 */
-	writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
-	while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
-		if (readl(USB_PORTSC) & PORTSC_PHCD)
-			break;
-		udelay(1);
-		cnt++;
-	}
-
-	if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) {
-		dev_err(phy->dev, "Unable to suspend PHY\n");
-		msm_otg_reset(phy);
-		enable_irq(motg->irq);
-		return -ETIMEDOUT;
-	}
-
-	/*
-	 * PHY has capability to generate interrupt asynchronously in low
-	 * power mode (LPM). This interrupt is level triggered. So USB IRQ
-	 * line must be disabled till async interrupt enable bit is cleared
-	 * in USBCMD register. Assert STP (ULPI interface STOP signal) to
-	 * block data communication from PHY.
-	 */
-	writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
-
-	addr = USB_PHY_CTRL;
-	if (motg->phy_number)
-		addr = USB_PHY_CTRL2;
-
-	if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
-			motg->pdata->otg_control == OTG_PMIC_CONTROL)
-		writel(readl(addr) | PHY_RETEN, addr);
-
-	clk_disable_unprepare(motg->pclk);
-	clk_disable_unprepare(motg->clk);
-	if (!IS_ERR(motg->core_clk))
-		clk_disable_unprepare(motg->core_clk);
-
-	if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
-			motg->pdata->otg_control == OTG_PMIC_CONTROL) {
-		msm_hsusb_ldo_set_mode(motg, 0);
-		msm_hsusb_config_vddcx(motg, 0);
-	}
-
-	if (device_may_wakeup(phy->dev))
-		enable_irq_wake(motg->irq);
-	if (bus)
-		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
-
-	atomic_set(&motg->in_lpm, 1);
-	enable_irq(motg->irq);
-
-	dev_info(phy->dev, "USB in low power mode\n");
-
-	return 0;
-}
-
-static int msm_otg_resume(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	struct usb_bus *bus = phy->otg->host;
-	void __iomem *addr;
-	int cnt = 0;
-	unsigned temp;
-
-	if (!atomic_read(&motg->in_lpm))
-		return 0;
-
-	clk_prepare_enable(motg->pclk);
-	clk_prepare_enable(motg->clk);
-	if (!IS_ERR(motg->core_clk))
-		clk_prepare_enable(motg->core_clk);
-
-	if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
-			motg->pdata->otg_control == OTG_PMIC_CONTROL) {
-
-		addr = USB_PHY_CTRL;
-		if (motg->phy_number)
-			addr = USB_PHY_CTRL2;
-
-		msm_hsusb_ldo_set_mode(motg, 1);
-		msm_hsusb_config_vddcx(motg, 1);
-		writel(readl(addr) & ~PHY_RETEN, addr);
-	}
-
-	temp = readl(USB_USBCMD);
-	temp &= ~ASYNC_INTR_CTRL;
-	temp &= ~ULPI_STP_CTRL;
-	writel(temp, USB_USBCMD);
-
-	/*
-	 * PHY comes out of low power mode (LPM) in case of wakeup
-	 * from asynchronous interrupt.
-	 */
-	if (!(readl(USB_PORTSC) & PORTSC_PHCD))
-		goto skip_phy_resume;
-
-	writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC);
-	while (cnt < PHY_RESUME_TIMEOUT_USEC) {
-		if (!(readl(USB_PORTSC) & PORTSC_PHCD))
-			break;
-		udelay(1);
-		cnt++;
-	}
-
-	if (cnt >= PHY_RESUME_TIMEOUT_USEC) {
-		/*
-		 * This is a fatal error. Reset the link and
-		 * PHY. USB state can not be restored. Re-insertion
-		 * of USB cable is the only way to get USB working.
-		 */
-		dev_err(phy->dev, "Unable to resume USB. Re-plugin the cable\n");
-		msm_otg_reset(phy);
-	}
-
-skip_phy_resume:
-	if (device_may_wakeup(phy->dev))
-		disable_irq_wake(motg->irq);
-	if (bus)
-		set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
-
-	atomic_set(&motg->in_lpm, 0);
-
-	if (motg->async_int) {
-		motg->async_int = 0;
-		pm_runtime_put(phy->dev);
-		enable_irq(motg->irq);
-	}
-
-	dev_info(phy->dev, "USB exited from low power mode\n");
-
-	return 0;
-}
-#endif
-
-static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA)
-{
-	if (motg->cur_power == mA)
-		return;
-
-	/* TODO: Notify PMIC about available current */
-	dev_info(motg->phy.dev, "Avail curr from USB = %u\n", mA);
-	motg->cur_power = mA;
-}
-
-static void msm_otg_start_host(struct usb_phy *phy, int on)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	struct msm_otg_platform_data *pdata = motg->pdata;
-	struct usb_hcd *hcd;
-
-	if (!phy->otg->host)
-		return;
-
-	hcd = bus_to_hcd(phy->otg->host);
-
-	if (on) {
-		dev_dbg(phy->dev, "host on\n");
-
-		if (pdata->vbus_power)
-			pdata->vbus_power(1);
-		/*
-		 * Some boards have a switch cotrolled by gpio
-		 * to enable/disable internal HUB. Enable internal
-		 * HUB before kicking the host.
-		 */
-		if (pdata->setup_gpio)
-			pdata->setup_gpio(OTG_STATE_A_HOST);
-#ifdef CONFIG_USB
-		usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
-		device_wakeup_enable(hcd->self.controller);
-#endif
-	} else {
-		dev_dbg(phy->dev, "host off\n");
-
-#ifdef CONFIG_USB
-		usb_remove_hcd(hcd);
-#endif
-		if (pdata->setup_gpio)
-			pdata->setup_gpio(OTG_STATE_UNDEFINED);
-		if (pdata->vbus_power)
-			pdata->vbus_power(0);
-	}
-}
-
-static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
-{
-	struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy);
-	struct usb_hcd *hcd;
-
-	/*
-	 * Fail host registration if this board can support
-	 * only peripheral configuration.
-	 */
-	if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL) {
-		dev_info(otg->usb_phy->dev, "Host mode is not supported\n");
-		return -ENODEV;
-	}
-
-	if (!host) {
-		if (otg->state == OTG_STATE_A_HOST) {
-			pm_runtime_get_sync(otg->usb_phy->dev);
-			msm_otg_start_host(otg->usb_phy, 0);
-			otg->host = NULL;
-			otg->state = OTG_STATE_UNDEFINED;
-			schedule_work(&motg->sm_work);
-		} else {
-			otg->host = NULL;
-		}
-
-		return 0;
-	}
-
-	hcd = bus_to_hcd(host);
-	hcd->power_budget = motg->pdata->power_budget;
-
-	otg->host = host;
-	dev_dbg(otg->usb_phy->dev, "host driver registered w/ tranceiver\n");
-
-	pm_runtime_get_sync(otg->usb_phy->dev);
-	schedule_work(&motg->sm_work);
-
-	return 0;
-}
-
-static void msm_otg_start_peripheral(struct usb_phy *phy, int on)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	struct msm_otg_platform_data *pdata = motg->pdata;
-
-	if (!phy->otg->gadget)
-		return;
-
-	if (on) {
-		dev_dbg(phy->dev, "gadget on\n");
-		/*
-		 * Some boards have a switch cotrolled by gpio
-		 * to enable/disable internal HUB. Disable internal
-		 * HUB before kicking the gadget.
-		 */
-		if (pdata->setup_gpio)
-			pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
-		usb_gadget_vbus_connect(phy->otg->gadget);
-	} else {
-		dev_dbg(phy->dev, "gadget off\n");
-		usb_gadget_vbus_disconnect(phy->otg->gadget);
-		if (pdata->setup_gpio)
-			pdata->setup_gpio(OTG_STATE_UNDEFINED);
-	}
-
-}
-
-static int msm_otg_set_peripheral(struct usb_otg *otg,
-					struct usb_gadget *gadget)
-{
-	struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy);
-
-	/*
-	 * Fail peripheral registration if this board can support
-	 * only host configuration.
-	 */
-	if (motg->pdata->mode == USB_DR_MODE_HOST) {
-		dev_info(otg->usb_phy->dev, "Peripheral mode is not supported\n");
-		return -ENODEV;
-	}
-
-	if (!gadget) {
-		if (otg->state == OTG_STATE_B_PERIPHERAL) {
-			pm_runtime_get_sync(otg->usb_phy->dev);
-			msm_otg_start_peripheral(otg->usb_phy, 0);
-			otg->gadget = NULL;
-			otg->state = OTG_STATE_UNDEFINED;
-			schedule_work(&motg->sm_work);
-		} else {
-			otg->gadget = NULL;
-		}
-
-		return 0;
-	}
-	otg->gadget = gadget;
-	dev_dbg(otg->usb_phy->dev,
-		"peripheral driver registered w/ tranceiver\n");
-
-	pm_runtime_get_sync(otg->usb_phy->dev);
-	schedule_work(&motg->sm_work);
-
-	return 0;
-}
-
-static bool msm_chg_check_secondary_det(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-	bool ret = false;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		ret = chg_det & (1 << 4);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x87);
-		ret = chg_det & 1;
-		break;
-	default:
-		break;
-	}
-	return ret;
-}
-
-static void msm_chg_enable_secondary_det(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		/* Turn off charger block */
-		chg_det |= ~(1 << 1);
-		ulpi_write(phy, chg_det, 0x34);
-		udelay(20);
-		/* control chg block via ULPI */
-		chg_det &= ~(1 << 3);
-		ulpi_write(phy, chg_det, 0x34);
-		/* put it in host mode for enabling D- source */
-		chg_det &= ~(1 << 2);
-		ulpi_write(phy, chg_det, 0x34);
-		/* Turn on chg detect block */
-		chg_det &= ~(1 << 1);
-		ulpi_write(phy, chg_det, 0x34);
-		udelay(20);
-		/* enable chg detection */
-		chg_det &= ~(1 << 0);
-		ulpi_write(phy, chg_det, 0x34);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		/*
-		 * Configure DM as current source, DP as current sink
-		 * and enable battery charging comparators.
-		 */
-		ulpi_write(phy, 0x8, 0x85);
-		ulpi_write(phy, 0x2, 0x85);
-		ulpi_write(phy, 0x1, 0x85);
-		break;
-	default:
-		break;
-	}
-}
-
-static bool msm_chg_check_primary_det(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-	bool ret = false;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		ret = chg_det & (1 << 4);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x87);
-		ret = chg_det & 1;
-		break;
-	default:
-		break;
-	}
-	return ret;
-}
-
-static void msm_chg_enable_primary_det(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		/* enable chg detection */
-		chg_det &= ~(1 << 0);
-		ulpi_write(phy, chg_det, 0x34);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		/*
-		 * Configure DP as current source, DM as current sink
-		 * and enable battery charging comparators.
-		 */
-		ulpi_write(phy, 0x2, 0x85);
-		ulpi_write(phy, 0x1, 0x85);
-		break;
-	default:
-		break;
-	}
-}
-
-static bool msm_chg_check_dcd(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 line_state;
-	bool ret = false;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		line_state = ulpi_read(phy, 0x15);
-		ret = !(line_state & 1);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		line_state = ulpi_read(phy, 0x87);
-		ret = line_state & 2;
-		break;
-	default:
-		break;
-	}
-	return ret;
-}
-
-static void msm_chg_disable_dcd(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		chg_det &= ~(1 << 5);
-		ulpi_write(phy, chg_det, 0x34);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		ulpi_write(phy, 0x10, 0x86);
-		break;
-	default:
-		break;
-	}
-}
-
-static void msm_chg_enable_dcd(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		/* Turn on D+ current source */
-		chg_det |= (1 << 5);
-		ulpi_write(phy, chg_det, 0x34);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		/* Data contact detection enable */
-		ulpi_write(phy, 0x10, 0x85);
-		break;
-	default:
-		break;
-	}
-}
-
-static void msm_chg_block_on(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 func_ctrl, chg_det;
-
-	/* put the controller in non-driving mode */
-	func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
-	func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-	func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-	ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		/* control chg block via ULPI */
-		chg_det &= ~(1 << 3);
-		ulpi_write(phy, chg_det, 0x34);
-		/* Turn on chg detect block */
-		chg_det &= ~(1 << 1);
-		ulpi_write(phy, chg_det, 0x34);
-		udelay(20);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		/* Clear charger detecting control bits */
-		ulpi_write(phy, 0x3F, 0x86);
-		/* Clear alt interrupt latch and enable bits */
-		ulpi_write(phy, 0x1F, 0x92);
-		ulpi_write(phy, 0x1F, 0x95);
-		udelay(100);
-		break;
-	default:
-		break;
-	}
-}
-
-static void msm_chg_block_off(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 func_ctrl, chg_det;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		/* Turn off charger block */
-		chg_det |= ~(1 << 1);
-		ulpi_write(phy, chg_det, 0x34);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		/* Clear charger detecting control bits */
-		ulpi_write(phy, 0x3F, 0x86);
-		/* Clear alt interrupt latch and enable bits */
-		ulpi_write(phy, 0x1F, 0x92);
-		ulpi_write(phy, 0x1F, 0x95);
-		break;
-	default:
-		break;
-	}
-
-	/* put the controller in normal mode */
-	func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
-	func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-	func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
-	ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
-}
-
-#define MSM_CHG_DCD_POLL_TIME		(100 * HZ/1000) /* 100 msec */
-#define MSM_CHG_DCD_MAX_RETRIES		6 /* Tdcd_tmout = 6 * 100 msec */
-#define MSM_CHG_PRIMARY_DET_TIME	(40 * HZ/1000) /* TVDPSRC_ON */
-#define MSM_CHG_SECONDARY_DET_TIME	(40 * HZ/1000) /* TVDMSRC_ON */
-static void msm_chg_detect_work(struct work_struct *w)
-{
-	struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work);
-	struct usb_phy *phy = &motg->phy;
-	bool is_dcd, tmout, vout;
-	unsigned long delay;
-
-	dev_dbg(phy->dev, "chg detection work\n");
-	switch (motg->chg_state) {
-	case USB_CHG_STATE_UNDEFINED:
-		pm_runtime_get_sync(phy->dev);
-		msm_chg_block_on(motg);
-		msm_chg_enable_dcd(motg);
-		motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
-		motg->dcd_retries = 0;
-		delay = MSM_CHG_DCD_POLL_TIME;
-		break;
-	case USB_CHG_STATE_WAIT_FOR_DCD:
-		is_dcd = msm_chg_check_dcd(motg);
-		tmout = ++motg->dcd_retries == MSM_CHG_DCD_MAX_RETRIES;
-		if (is_dcd || tmout) {
-			msm_chg_disable_dcd(motg);
-			msm_chg_enable_primary_det(motg);
-			delay = MSM_CHG_PRIMARY_DET_TIME;
-			motg->chg_state = USB_CHG_STATE_DCD_DONE;
-		} else {
-			delay = MSM_CHG_DCD_POLL_TIME;
-		}
-		break;
-	case USB_CHG_STATE_DCD_DONE:
-		vout = msm_chg_check_primary_det(motg);
-		if (vout) {
-			msm_chg_enable_secondary_det(motg);
-			delay = MSM_CHG_SECONDARY_DET_TIME;
-			motg->chg_state = USB_CHG_STATE_PRIMARY_DONE;
-		} else {
-			motg->chg_type = USB_SDP_CHARGER;
-			motg->chg_state = USB_CHG_STATE_DETECTED;
-			delay = 0;
-		}
-		break;
-	case USB_CHG_STATE_PRIMARY_DONE:
-		vout = msm_chg_check_secondary_det(motg);
-		if (vout)
-			motg->chg_type = USB_DCP_CHARGER;
-		else
-			motg->chg_type = USB_CDP_CHARGER;
-		motg->chg_state = USB_CHG_STATE_SECONDARY_DONE;
-		/* fall through */
-	case USB_CHG_STATE_SECONDARY_DONE:
-		motg->chg_state = USB_CHG_STATE_DETECTED;
-		/* fall through */
-	case USB_CHG_STATE_DETECTED:
-		msm_chg_block_off(motg);
-		dev_dbg(phy->dev, "charger = %d\n", motg->chg_type);
-		schedule_work(&motg->sm_work);
-		return;
-	default:
-		return;
-	}
-
-	schedule_delayed_work(&motg->chg_work, delay);
-}
-
-/*
- * We support OTG, Peripheral only and Host only configurations. In case
- * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen
- * via Id pin status or user request (debugfs). Id/BSV interrupts are not
- * enabled when switch is controlled by user and default mode is supplied
- * by board file, which can be changed by userspace later.
- */
-static void msm_otg_init_sm(struct msm_otg *motg)
-{
-	struct msm_otg_platform_data *pdata = motg->pdata;
-	u32 otgsc = readl(USB_OTGSC);
-
-	switch (pdata->mode) {
-	case USB_DR_MODE_OTG:
-		if (pdata->otg_control == OTG_PHY_CONTROL) {
-			if (otgsc & OTGSC_ID)
-				set_bit(ID, &motg->inputs);
-			else
-				clear_bit(ID, &motg->inputs);
-
-			if (otgsc & OTGSC_BSV)
-				set_bit(B_SESS_VLD, &motg->inputs);
-			else
-				clear_bit(B_SESS_VLD, &motg->inputs);
-		} else if (pdata->otg_control == OTG_USER_CONTROL) {
-				set_bit(ID, &motg->inputs);
-				clear_bit(B_SESS_VLD, &motg->inputs);
-		}
-		break;
-	case USB_DR_MODE_HOST:
-		clear_bit(ID, &motg->inputs);
-		break;
-	case USB_DR_MODE_PERIPHERAL:
-		set_bit(ID, &motg->inputs);
-		if (otgsc & OTGSC_BSV)
-			set_bit(B_SESS_VLD, &motg->inputs);
-		else
-			clear_bit(B_SESS_VLD, &motg->inputs);
-		break;
-	default:
-		break;
-	}
-}
-
-static void msm_otg_sm_work(struct work_struct *w)
-{
-	struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
-	struct usb_otg *otg = motg->phy.otg;
-
-	switch (otg->state) {
-	case OTG_STATE_UNDEFINED:
-		dev_dbg(otg->usb_phy->dev, "OTG_STATE_UNDEFINED state\n");
-		msm_otg_reset(otg->usb_phy);
-		msm_otg_init_sm(motg);
-		otg->state = OTG_STATE_B_IDLE;
-		/* FALL THROUGH */
-	case OTG_STATE_B_IDLE:
-		dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_IDLE state\n");
-		if (!test_bit(ID, &motg->inputs) && otg->host) {
-			/* disable BSV bit */
-			writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
-			msm_otg_start_host(otg->usb_phy, 1);
-			otg->state = OTG_STATE_A_HOST;
-		} else if (test_bit(B_SESS_VLD, &motg->inputs)) {
-			switch (motg->chg_state) {
-			case USB_CHG_STATE_UNDEFINED:
-				msm_chg_detect_work(&motg->chg_work.work);
-				break;
-			case USB_CHG_STATE_DETECTED:
-				switch (motg->chg_type) {
-				case USB_DCP_CHARGER:
-					msm_otg_notify_charger(motg,
-							IDEV_CHG_MAX);
-					break;
-				case USB_CDP_CHARGER:
-					msm_otg_notify_charger(motg,
-							IDEV_CHG_MAX);
-					msm_otg_start_peripheral(otg->usb_phy,
-								 1);
-					otg->state
-						= OTG_STATE_B_PERIPHERAL;
-					break;
-				case USB_SDP_CHARGER:
-					msm_otg_notify_charger(motg, IUNIT);
-					msm_otg_start_peripheral(otg->usb_phy,
-								 1);
-					otg->state
-						= OTG_STATE_B_PERIPHERAL;
-					break;
-				default:
-					break;
-				}
-				break;
-			default:
-				break;
-			}
-		} else {
-			/*
-			 * If charger detection work is pending, decrement
-			 * the pm usage counter to balance with the one that
-			 * is incremented in charger detection work.
-			 */
-			if (cancel_delayed_work_sync(&motg->chg_work)) {
-				pm_runtime_put_sync(otg->usb_phy->dev);
-				msm_otg_reset(otg->usb_phy);
-			}
-			msm_otg_notify_charger(motg, 0);
-			motg->chg_state = USB_CHG_STATE_UNDEFINED;
-			motg->chg_type = USB_INVALID_CHARGER;
-		}
-
-		if (otg->state == OTG_STATE_B_IDLE)
-			pm_runtime_put_sync(otg->usb_phy->dev);
-		break;
-	case OTG_STATE_B_PERIPHERAL:
-		dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_PERIPHERAL state\n");
-		if (!test_bit(B_SESS_VLD, &motg->inputs) ||
-				!test_bit(ID, &motg->inputs)) {
-			msm_otg_notify_charger(motg, 0);
-			msm_otg_start_peripheral(otg->usb_phy, 0);
-			motg->chg_state = USB_CHG_STATE_UNDEFINED;
-			motg->chg_type = USB_INVALID_CHARGER;
-			otg->state = OTG_STATE_B_IDLE;
-			msm_otg_reset(otg->usb_phy);
-			schedule_work(w);
-		}
-		break;
-	case OTG_STATE_A_HOST:
-		dev_dbg(otg->usb_phy->dev, "OTG_STATE_A_HOST state\n");
-		if (test_bit(ID, &motg->inputs)) {
-			msm_otg_start_host(otg->usb_phy, 0);
-			otg->state = OTG_STATE_B_IDLE;
-			msm_otg_reset(otg->usb_phy);
-			schedule_work(w);
-		}
-		break;
-	default:
-		break;
-	}
-}
-
-static irqreturn_t msm_otg_irq(int irq, void *data)
-{
-	struct msm_otg *motg = data;
-	struct usb_phy *phy = &motg->phy;
-	u32 otgsc = 0;
-
-	if (atomic_read(&motg->in_lpm)) {
-		disable_irq_nosync(irq);
-		motg->async_int = 1;
-		pm_runtime_get(phy->dev);
-		return IRQ_HANDLED;
-	}
-
-	otgsc = readl(USB_OTGSC);
-	if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS)))
-		return IRQ_NONE;
-
-	if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) {
-		if (otgsc & OTGSC_ID)
-			set_bit(ID, &motg->inputs);
-		else
-			clear_bit(ID, &motg->inputs);
-		dev_dbg(phy->dev, "ID set/clear\n");
-		pm_runtime_get_noresume(phy->dev);
-	} else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
-		if (otgsc & OTGSC_BSV)
-			set_bit(B_SESS_VLD, &motg->inputs);
-		else
-			clear_bit(B_SESS_VLD, &motg->inputs);
-		dev_dbg(phy->dev, "BSV set/clear\n");
-		pm_runtime_get_noresume(phy->dev);
-	}
-
-	writel(otgsc, USB_OTGSC);
-	schedule_work(&motg->sm_work);
-	return IRQ_HANDLED;
-}
-
-static int msm_otg_mode_show(struct seq_file *s, void *unused)
-{
-	struct msm_otg *motg = s->private;
-	struct usb_otg *otg = motg->phy.otg;
-
-	switch (otg->state) {
-	case OTG_STATE_A_HOST:
-		seq_puts(s, "host\n");
-		break;
-	case OTG_STATE_B_PERIPHERAL:
-		seq_puts(s, "peripheral\n");
-		break;
-	default:
-		seq_puts(s, "none\n");
-		break;
-	}
-
-	return 0;
-}
-
-static int msm_otg_mode_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, msm_otg_mode_show, inode->i_private);
-}
-
-static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
-				size_t count, loff_t *ppos)
-{
-	struct seq_file *s = file->private_data;
-	struct msm_otg *motg = s->private;
-	char buf[16];
-	struct usb_otg *otg = motg->phy.otg;
-	int status = count;
-	enum usb_dr_mode req_mode;
-
-	memset(buf, 0x00, sizeof(buf));
-
-	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) {
-		status = -EFAULT;
-		goto out;
-	}
-
-	if (!strncmp(buf, "host", 4)) {
-		req_mode = USB_DR_MODE_HOST;
-	} else if (!strncmp(buf, "peripheral", 10)) {
-		req_mode = USB_DR_MODE_PERIPHERAL;
-	} else if (!strncmp(buf, "none", 4)) {
-		req_mode = USB_DR_MODE_UNKNOWN;
-	} else {
-		status = -EINVAL;
-		goto out;
-	}
-
-	switch (req_mode) {
-	case USB_DR_MODE_UNKNOWN:
-		switch (otg->state) {
-		case OTG_STATE_A_HOST:
-		case OTG_STATE_B_PERIPHERAL:
-			set_bit(ID, &motg->inputs);
-			clear_bit(B_SESS_VLD, &motg->inputs);
-			break;
-		default:
-			goto out;
-		}
-		break;
-	case USB_DR_MODE_PERIPHERAL:
-		switch (otg->state) {
-		case OTG_STATE_B_IDLE:
-		case OTG_STATE_A_HOST:
-			set_bit(ID, &motg->inputs);
-			set_bit(B_SESS_VLD, &motg->inputs);
-			break;
-		default:
-			goto out;
-		}
-		break;
-	case USB_DR_MODE_HOST:
-		switch (otg->state) {
-		case OTG_STATE_B_IDLE:
-		case OTG_STATE_B_PERIPHERAL:
-			clear_bit(ID, &motg->inputs);
-			break;
-		default:
-			goto out;
-		}
-		break;
-	default:
-		goto out;
-	}
-
-	pm_runtime_get_sync(otg->usb_phy->dev);
-	schedule_work(&motg->sm_work);
-out:
-	return status;
-}
-
-static const struct file_operations msm_otg_mode_fops = {
-	.open = msm_otg_mode_open,
-	.read = seq_read,
-	.write = msm_otg_mode_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-
-static struct dentry *msm_otg_dbg_root;
-static struct dentry *msm_otg_dbg_mode;
-
-static int msm_otg_debugfs_init(struct msm_otg *motg)
-{
-	msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL);
-
-	if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root))
-		return -ENODEV;
-
-	msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR,
-				msm_otg_dbg_root, motg, &msm_otg_mode_fops);
-	if (!msm_otg_dbg_mode) {
-		debugfs_remove(msm_otg_dbg_root);
-		msm_otg_dbg_root = NULL;
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static void msm_otg_debugfs_cleanup(void)
-{
-	debugfs_remove(msm_otg_dbg_mode);
-	debugfs_remove(msm_otg_dbg_root);
-}
-
-static const struct of_device_id msm_otg_dt_match[] = {
-	{
-		.compatible = "qcom,usb-otg-ci",
-		.data = (void *) CI_45NM_INTEGRATED_PHY
-	},
-	{
-		.compatible = "qcom,usb-otg-snps",
-		.data = (void *) SNPS_28NM_INTEGRATED_PHY
-	},
-	{ }
-};
-MODULE_DEVICE_TABLE(of, msm_otg_dt_match);
-
-static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event,
-				void *ptr)
-{
-	struct usb_phy *usb_phy = container_of(nb, struct usb_phy, vbus_nb);
-	struct msm_otg *motg = container_of(usb_phy, struct msm_otg, phy);
-
-	if (event)
-		set_bit(B_SESS_VLD, &motg->inputs);
-	else
-		clear_bit(B_SESS_VLD, &motg->inputs);
-
-	if (test_bit(B_SESS_VLD, &motg->inputs)) {
-		/* Switch D+/D- lines to Device connector */
-		gpiod_set_value_cansleep(motg->switch_gpio, 0);
-	} else {
-		/* Switch D+/D- lines to Hub */
-		gpiod_set_value_cansleep(motg->switch_gpio, 1);
-	}
-
-	schedule_work(&motg->sm_work);
-
-	return NOTIFY_DONE;
-}
-
-static int msm_otg_id_notifier(struct notifier_block *nb, unsigned long event,
-				void *ptr)
-{
-	struct usb_phy *usb_phy = container_of(nb, struct usb_phy, id_nb);
-	struct msm_otg *motg = container_of(usb_phy, struct msm_otg, phy);
-
-	if (event)
-		clear_bit(ID, &motg->inputs);
-	else
-		set_bit(ID, &motg->inputs);
-
-	schedule_work(&motg->sm_work);
-
-	return NOTIFY_DONE;
-}
-
-static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
-{
-	struct msm_otg_platform_data *pdata;
-	struct device_node *node = pdev->dev.of_node;
-	struct property *prop;
-	int len, ret, words;
-	u32 val, tmp[3];
-
-	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		return -ENOMEM;
-
-	motg->pdata = pdata;
-
-	pdata->phy_type = (enum msm_usb_phy_type)of_device_get_match_data(&pdev->dev);
-	if (!pdata->phy_type)
-		return 1;
-
-	motg->link_rst = devm_reset_control_get(&pdev->dev, "link");
-	if (IS_ERR(motg->link_rst))
-		return PTR_ERR(motg->link_rst);
-
-	motg->phy_rst = devm_reset_control_get(&pdev->dev, "phy");
-	if (IS_ERR(motg->phy_rst))
-		motg->phy_rst = NULL;
-
-	pdata->mode = usb_get_dr_mode(&pdev->dev);
-	if (pdata->mode == USB_DR_MODE_UNKNOWN)
-		pdata->mode = USB_DR_MODE_OTG;
-
-	pdata->otg_control = OTG_PHY_CONTROL;
-	if (!of_property_read_u32(node, "qcom,otg-control", &val))
-		if (val == OTG_PMIC_CONTROL)
-			pdata->otg_control = val;
-
-	if (!of_property_read_u32(node, "qcom,phy-num", &val) && val < 2)
-		motg->phy_number = val;
-
-	motg->vdd_levels[VDD_LEVEL_NONE] = USB_PHY_SUSP_DIG_VOL;
-	motg->vdd_levels[VDD_LEVEL_MIN] = USB_PHY_VDD_DIG_VOL_MIN;
-	motg->vdd_levels[VDD_LEVEL_MAX] = USB_PHY_VDD_DIG_VOL_MAX;
-
-	if (of_get_property(node, "qcom,vdd-levels", &len) &&
-	    len == sizeof(tmp)) {
-		of_property_read_u32_array(node, "qcom,vdd-levels",
-					   tmp, len / sizeof(*tmp));
-		motg->vdd_levels[VDD_LEVEL_NONE] = tmp[VDD_LEVEL_NONE];
-		motg->vdd_levels[VDD_LEVEL_MIN] = tmp[VDD_LEVEL_MIN];
-		motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX];
-	}
-
-	motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup");
-
-	motg->switch_gpio = devm_gpiod_get_optional(&pdev->dev, "switch",
-						    GPIOD_OUT_LOW);
-	if (IS_ERR(motg->switch_gpio))
-		return PTR_ERR(motg->switch_gpio);
-
-	prop = of_find_property(node, "qcom,phy-init-sequence", &len);
-	if (!prop || !len)
-		return 0;
-
-	words = len / sizeof(u32);
-
-	if (words >= ULPI_EXT_VENDOR_SPECIFIC) {
-		dev_warn(&pdev->dev, "Too big PHY init sequence %d\n", words);
-		return 0;
-	}
-
-	pdata->phy_init_seq = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
-	if (!pdata->phy_init_seq)
-		return 0;
-
-	ret = of_property_read_u32_array(node, "qcom,phy-init-sequence",
-					 pdata->phy_init_seq, words);
-	if (!ret)
-		pdata->phy_init_sz = words;
-
-	return 0;
-}
-
-static int msm_otg_reboot_notify(struct notifier_block *this,
-				 unsigned long code, void *unused)
-{
-	struct msm_otg *motg = container_of(this, struct msm_otg, reboot);
-
-	/*
-	 * Ensure that D+/D- lines are routed to uB connector, so
-	 * we could load bootloader/kernel at next reboot
-	 */
-	gpiod_set_value_cansleep(motg->switch_gpio, 0);
-	return NOTIFY_DONE;
-}
-
-static int msm_otg_probe(struct platform_device *pdev)
-{
-	int ret = 0;
-	struct device_node *np = pdev->dev.of_node;
-	struct msm_otg_platform_data *pdata;
-	struct resource *res;
-	struct msm_otg *motg;
-	struct usb_phy *phy;
-	void __iomem *phy_select;
-
-	motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL);
-	if (!motg)
-		return -ENOMEM;
-
-	motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
-				     GFP_KERNEL);
-	if (!motg->phy.otg)
-		return -ENOMEM;
-
-	phy = &motg->phy;
-	phy->dev = &pdev->dev;
-
-	motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
-	if (IS_ERR(motg->clk)) {
-		dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
-		return PTR_ERR(motg->clk);
-	}
-
-	/*
-	 * If USB Core is running its protocol engine based on CORE CLK,
-	 * CORE CLK  must be running at >55Mhz for correct HSUSB
-	 * operation and USB core cannot tolerate frequency changes on
-	 * CORE CLK.
-	 */
-	motg->pclk = devm_clk_get(&pdev->dev, np ? "iface" : "usb_hs_pclk");
-	if (IS_ERR(motg->pclk)) {
-		dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
-		return PTR_ERR(motg->pclk);
-	}
-
-	/*
-	 * USB core clock is not present on all MSM chips. This
-	 * clock is introduced to remove the dependency on AXI
-	 * bus frequency.
-	 */
-	motg->core_clk = devm_clk_get(&pdev->dev,
-				      np ? "alt_core" : "usb_hs_core_clk");
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -EINVAL;
-	motg->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!motg->regs)
-		return -ENOMEM;
-
-	pdata = dev_get_platdata(&pdev->dev);
-	if (!pdata) {
-		if (!np)
-			return -ENXIO;
-		ret = msm_otg_read_dt(pdev, motg);
-		if (ret)
-			return ret;
-	}
-
-	/*
-	 * NOTE: The PHYs can be multiplexed between the chipidea controller
-	 * and the dwc3 controller, using a single bit. It is important that
-	 * the dwc3 driver does not set this bit in an incompatible way.
-	 */
-	if (motg->phy_number) {
-		phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4);
-		if (!phy_select)
-			return -ENOMEM;
-
-		/* Enable second PHY with the OTG port */
-		writel(0x1, phy_select);
-	}
-
-	dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
-
-	motg->irq = platform_get_irq(pdev, 0);
-	if (motg->irq < 0) {
-		dev_err(&pdev->dev, "platform_get_irq failed\n");
-		ret = motg->irq;
-		return motg->irq;
-	}
-
-	motg->supplies[0].supply = "vddcx";
-	motg->supplies[1].supply = "v3p3";
-	motg->supplies[2].supply = "v1p8";
-
-	ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(motg->supplies),
-				      motg->supplies);
-	if (ret)
-		return ret;
-
-	motg->vddcx = motg->supplies[0].consumer;
-	motg->v3p3  = motg->supplies[1].consumer;
-	motg->v1p8  = motg->supplies[2].consumer;
-
-	clk_set_rate(motg->clk, 60000000);
-
-	clk_prepare_enable(motg->clk);
-	clk_prepare_enable(motg->pclk);
-
-	if (!IS_ERR(motg->core_clk))
-		clk_prepare_enable(motg->core_clk);
-
-	ret = msm_hsusb_init_vddcx(motg, 1);
-	if (ret) {
-		dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
-		goto disable_clks;
-	}
-
-	ret = msm_hsusb_ldo_init(motg, 1);
-	if (ret) {
-		dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
-		goto disable_vddcx;
-	}
-	ret = msm_hsusb_ldo_set_mode(motg, 1);
-	if (ret) {
-		dev_err(&pdev->dev, "hsusb vreg enable failed\n");
-		goto disable_ldo;
-	}
-
-	writel(0, USB_USBINTR);
-	writel(0, USB_OTGSC);
-
-	INIT_WORK(&motg->sm_work, msm_otg_sm_work);
-	INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work);
-	ret = devm_request_irq(&pdev->dev, motg->irq, msm_otg_irq, IRQF_SHARED,
-					"msm_otg", motg);
-	if (ret) {
-		dev_err(&pdev->dev, "request irq failed\n");
-		goto disable_ldo;
-	}
-
-	phy->init = msm_phy_init;
-	phy->notify_disconnect = msm_phy_notify_disconnect;
-	phy->type = USB_PHY_TYPE_USB2;
-	phy->vbus_nb.notifier_call = msm_otg_vbus_notifier;
-	phy->id_nb.notifier_call = msm_otg_id_notifier;
-
-	phy->io_ops = &msm_otg_io_ops;
-
-	phy->otg->usb_phy = &motg->phy;
-	phy->otg->set_host = msm_otg_set_host;
-	phy->otg->set_peripheral = msm_otg_set_peripheral;
-
-	msm_usb_reset(phy);
-
-	ret = usb_add_phy_dev(&motg->phy);
-	if (ret) {
-		dev_err(&pdev->dev, "usb_add_phy failed\n");
-		goto disable_ldo;
-	}
-
-	ret = extcon_get_state(phy->edev, EXTCON_USB);
-	if (ret)
-		set_bit(B_SESS_VLD, &motg->inputs);
-	else
-		clear_bit(B_SESS_VLD, &motg->inputs);
-
-	ret = extcon_get_state(phy->id_edev, EXTCON_USB_HOST);
-	if (ret)
-		clear_bit(ID, &motg->inputs);
-	else
-		set_bit(ID, &motg->inputs);
-
-	platform_set_drvdata(pdev, motg);
-	device_init_wakeup(&pdev->dev, 1);
-
-	if (motg->pdata->mode == USB_DR_MODE_OTG &&
-		motg->pdata->otg_control == OTG_USER_CONTROL) {
-		ret = msm_otg_debugfs_init(motg);
-		if (ret)
-			dev_dbg(&pdev->dev, "Can not create mode change file\n");
-	}
-
-	if (test_bit(B_SESS_VLD, &motg->inputs)) {
-		/* Switch D+/D- lines to Device connector */
-		gpiod_set_value_cansleep(motg->switch_gpio, 0);
-	} else {
-		/* Switch D+/D- lines to Hub */
-		gpiod_set_value_cansleep(motg->switch_gpio, 1);
-	}
-
-	motg->reboot.notifier_call = msm_otg_reboot_notify;
-	register_reboot_notifier(&motg->reboot);
-
-	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
-
-	return 0;
-
-disable_ldo:
-	msm_hsusb_ldo_init(motg, 0);
-disable_vddcx:
-	msm_hsusb_init_vddcx(motg, 0);
-disable_clks:
-	clk_disable_unprepare(motg->pclk);
-	clk_disable_unprepare(motg->clk);
-	if (!IS_ERR(motg->core_clk))
-		clk_disable_unprepare(motg->core_clk);
-
-	return ret;
-}
-
-static int msm_otg_remove(struct platform_device *pdev)
-{
-	struct msm_otg *motg = platform_get_drvdata(pdev);
-	struct usb_phy *phy = &motg->phy;
-	int cnt = 0;
-
-	if (phy->otg->host || phy->otg->gadget)
-		return -EBUSY;
-
-	unregister_reboot_notifier(&motg->reboot);
-
-	/*
-	 * Ensure that D+/D- lines are routed to uB connector, so
-	 * we could load bootloader/kernel at next reboot
-	 */
-	gpiod_set_value_cansleep(motg->switch_gpio, 0);
-
-	msm_otg_debugfs_cleanup();
-	cancel_delayed_work_sync(&motg->chg_work);
-	cancel_work_sync(&motg->sm_work);
-
-	pm_runtime_resume(&pdev->dev);
-
-	device_init_wakeup(&pdev->dev, 0);
-	pm_runtime_disable(&pdev->dev);
-
-	usb_remove_phy(phy);
-	disable_irq(motg->irq);
-
-	/*
-	 * Put PHY in low power mode.
-	 */
-	ulpi_read(phy, 0x14);
-	ulpi_write(phy, 0x08, 0x09);
-
-	writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
-	while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
-		if (readl(USB_PORTSC) & PORTSC_PHCD)
-			break;
-		udelay(1);
-		cnt++;
-	}
-	if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
-		dev_err(phy->dev, "Unable to suspend PHY\n");
-
-	clk_disable_unprepare(motg->pclk);
-	clk_disable_unprepare(motg->clk);
-	if (!IS_ERR(motg->core_clk))
-		clk_disable_unprepare(motg->core_clk);
-	msm_hsusb_ldo_init(motg, 0);
-
-	pm_runtime_set_suspended(&pdev->dev);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int msm_otg_runtime_idle(struct device *dev)
-{
-	struct msm_otg *motg = dev_get_drvdata(dev);
-	struct usb_otg *otg = motg->phy.otg;
-
-	dev_dbg(dev, "OTG runtime idle\n");
-
-	/*
-	 * It is observed some times that a spurious interrupt
-	 * comes when PHY is put into LPM immediately after PHY reset.
-	 * This 1 sec delay also prevents entering into LPM immediately
-	 * after asynchronous interrupt.
-	 */
-	if (otg->state != OTG_STATE_UNDEFINED)
-		pm_schedule_suspend(dev, 1000);
-
-	return -EAGAIN;
-}
-
-static int msm_otg_runtime_suspend(struct device *dev)
-{
-	struct msm_otg *motg = dev_get_drvdata(dev);
-
-	dev_dbg(dev, "OTG runtime suspend\n");
-	return msm_otg_suspend(motg);
-}
-
-static int msm_otg_runtime_resume(struct device *dev)
-{
-	struct msm_otg *motg = dev_get_drvdata(dev);
-
-	dev_dbg(dev, "OTG runtime resume\n");
-	return msm_otg_resume(motg);
-}
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int msm_otg_pm_suspend(struct device *dev)
-{
-	struct msm_otg *motg = dev_get_drvdata(dev);
-
-	dev_dbg(dev, "OTG PM suspend\n");
-	return msm_otg_suspend(motg);
-}
-
-static int msm_otg_pm_resume(struct device *dev)
-{
-	struct msm_otg *motg = dev_get_drvdata(dev);
-	int ret;
-
-	dev_dbg(dev, "OTG PM resume\n");
-
-	ret = msm_otg_resume(motg);
-	if (ret)
-		return ret;
-
-	/*
-	 * Runtime PM Documentation recommends bringing the
-	 * device to full powered state upon resume.
-	 */
-	pm_runtime_disable(dev);
-	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
-
-	return 0;
-}
-#endif
-
-static const struct dev_pm_ops msm_otg_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
-	SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
-				msm_otg_runtime_idle)
-};
-
-static struct platform_driver msm_otg_driver = {
-	.probe = msm_otg_probe,
-	.remove = msm_otg_remove,
-	.driver = {
-		.name = DRIVER_NAME,
-		.pm = &msm_otg_dev_pm_ops,
-		.of_match_table = msm_otg_dt_match,
-	},
-};
-
-module_platform_driver(msm_otg_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("MSM USB transceiver driver");