Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2015-09-01 13:09:20 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2015-09-01 13:09:20 -0700
commit: b3a5af435ab4b860714b2f56c65fd506aa677e71 (patch)
tree: 4673c2c4a4fe83783a7ee3ec782803452a4f0eb0
parent: 102178108e2246cb4b329d3fb7872cd3d7120205 (diff)
parent: 4c80a00388dd7b9d9e7ebf31e62b96c7b74178b8 (diff)
download: linux-b3a5af435ab4b860714b2f56c65fd506aa677e71.tar.bz2
282 files changed, 20100 insertions, 3197 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 23c097812d98..7fd64ec9ee1d 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -52,6 +52,7 @@ System Timer (ST) required properties:
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt for the ST which is the IRQ line
   shared across all System Controller members.
+- clocks: phandle to input clock.
 Its subnodes can be:
 - watchdog: compatible should be "atmel,at91rm9200-wdt"
 
@@ -63,7 +64,7 @@ TC/TCLIB Timer required properties:
   Note that you can specify several interrupt cells if the TC
   block has one interrupt per channel.
 - clock-names: tuple listing input clock names.
-	Required elements: "t0_clk"
+	Required elements: "t0_clk", "slow_clk"
 	Optional elements: "t1_clk", "t2_clk"
 - clocks: phandles to input clocks.
 
@@ -91,12 +92,14 @@ RSTC Reset Controller required properties:
 - compatible: Should be "atmel,<chip>-rstc".
   <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
 - reg: Should contain registers location and length
+- clocks: phandle to input clock.
 
 Example:
 
 	rstc@fffffd00 {
 		compatible = "atmel,at91sam9260-rstc";
 		reg = <0xfffffd00 0x10>;
+		clocks = <&clk32k>;
 	};
 
 RAMC SDRAM/DDR Controller required properties:
@@ -119,6 +122,7 @@ required properties:
 - compatible: Should be "atmel,<chip>-shdwc".
   <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
 - reg: Should contain registers location and length
+- clocks: phandle to input clock.
 
 optional properties:
 - atmel,wakeup-mode: String, operation mode of the wakeup mode.
@@ -137,9 +141,10 @@ optional at91sam9x5 properties:
 
 Example:
 
-	rstc@fffffd00 {
-		compatible = "atmel,at91sam9260-rstc";
-		reg = <0xfffffd00 0x10>;
+	shdwc@fffffd10 {
+		compatible = "atmel,at91sam9260-shdwc";
+		reg = <0xfffffd10 0x10>;
+		clocks = <&clk32k>;
 	};
 
 Special Function Registers (SFR)
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
new file mode 100644
index 000000000000..6824b3180ffb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
@@ -0,0 +1,14 @@
+Raspberry Pi VideoCore firmware driver
+
+Required properties:
+
+- compatible:		Should be "raspberrypi,bcm2835-firmware"
+- mboxes:		Phandle to the firmware device's Mailbox.
+			  (See: ../mailbox/mailbox.txt for more information)
+
+Example:
+
+firmware {
+	compatible = "raspberrypi,bcm2835-firmware";
+	mboxes = <&mailbox>;
+};
diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
index 4f40ff3fee4b..5171ad8f48ff 100644
--- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
@@ -20,6 +20,8 @@ And in addition, the compatible shall be extended with the specific
 board. Currently known boards are:
 
 "buffalo,lschlv2"
+"buffalo,lswvl"
+"buffalo,lswxl"
 "buffalo,lsxhl"
 "buffalo,lsxl"
 "dlink,dns-320"
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index dd7550a29db6..2daa424a13a4 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -5,6 +5,7 @@ Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property:
 Required root node property:
 
 compatible: Must contain one of
+   "mediatek,mt6580"
    "mediatek,mt6589"
    "mediatek,mt6592"
    "mediatek,mt8127"
@@ -14,6 +15,9 @@ compatible: Must contain one of
 
 Supported boards:
 
+- Evaluation board for MT6580:
+    Required root node properties:
+      - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
 - bq Aquaris5 smart phone:
     Required root node properties:
       - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
index 4f5a5352ccd8..3c9c3a7f3d25 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
@@ -11,6 +11,7 @@ Required properties:
 	"mediatek,mt6592-sysirq"
 	"mediatek,mt6589-sysirq"
 	"mediatek,mt6582-sysirq"
+	"mediatek,mt6580-sysirq"
 	"mediatek,mt6577-sysirq"
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Use the same format as specified by GIC in
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 4f6a82cef1d1..9f4e5136e568 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -135,6 +135,9 @@ Boards:
 - AM335X OrionLXm : Substation Automation Platform
   compatible = "novatech,am335x-lxm", "ti,am33xx"
 
+- AM335X phyBOARD-WEGA: Single Board Computer dev kit
+  compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
+
 - OMAP5 EVM : Evaluation Module
   compatible = "ti,omap5-evm", "ti,omap5"
 
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 60d4a1e0a9b5..af58cd74aeff 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -26,3 +26,38 @@ Rockchip platforms device tree bindings
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
+
+- Netxeon R89 board:
+    Required root node properties:
+      - compatible = "netxeon,r89", "rockchip,rk3288";
+
+- Google Jerry (Hisense Chromebook C11 and more):
+    Required root node properties:
+      - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+		     "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
+		     "google,veyron-jerry-rev3", "google,veyron-jerry",
+		     "google,veyron", "rockchip,rk3288";
+
+- Google Minnie (Asus Chromebook Flip C100P):
+    Required root node properties:
+      - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+		     "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+		     "google,veyron-minnie-rev0", "google,veyron-minnie",
+		     "google,veyron", "rockchip,rk3288";
+
+- Google Pinky (dev-board):
+    Required root node properties:
+      - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+		     "google,veyron", "rockchip,rk3288";
+
+- Google Speedy (Asus C201 Chromebook):
+    Required root node properties:
+      - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
+		     "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
+		     "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
+		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
+		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+
+- Rockchip R88 board:
+    Required root node properties:
+      - compatible = "rockchip,r88", "rockchip,rk3368";
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
new file mode 100644
index 000000000000..571d5039f663
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
@@ -0,0 +1,13 @@
+* Clock bindings for Freescale i.MX6 UltraLite
+
+Required properties:
+- compatible: Should be "fsl,imx6ul-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+  entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6ul-clock.h
+for the full list of i.MX6 UltraLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index efb51cf0c845..d8b168ebd5f1 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -21,8 +21,8 @@ Required properties:
 	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
 	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
 	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
-	"st,stih407-plls-c32-c0_0",	"st,clkgen-plls-c32"
-	"st,stih407-plls-c32-c0_1",	"st,clkgen-plls-c32"
+	"sst,plls-c32-cx_0",		"st,clkgen-plls-c32"
+	"sst,plls-c32-cx_1",		"st,clkgen-plls-c32"
 
 	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
index f9c6454146b6..a43d26d41e04 100644
--- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
@@ -1,5 +1,9 @@
 Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
 
+This controller has an optional ECC support in half-bus width (16-bit)
+configuration. The ECC controller corrects one bit error and detects
+two bit errors.
+
 Required properties:
  - compatible: Should be 'xlnx,zynq-ddrc-a05'
  - reg: Base address and size of the controllers memory area
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
new file mode 100644
index 000000000000..a81bbf37ed66
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX6 UltraLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6ul-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
+  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+  imx6ul-pinfunc.h under device tree source folder.  The last integer CONFIG is
+  the pad setting value like pull-up on this pin.  Please refer to i.MX6 UltraLite
+  Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (0 << 6)
+PAD_CTL_SPEED_MED               (1 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_260ohm              (1 << 3)
+PAD_CTL_DSE_130ohm              (2 << 3)
+PAD_CTL_DSE_87ohm               (3 << 3)
+PAD_CTL_DSE_65ohm               (4 << 3)
+PAD_CTL_DSE_52ohm               (5 << 3)
+PAD_CTL_DSE_43ohm               (6 << 3)
+PAD_CTL_DSE_37ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
index 32c1c8bfd5dc..98c9f560e5c5 100644
--- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt
+++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
@@ -3,6 +3,7 @@ Altera SOCFPGA Reset Manager
 Required properties:
 - compatible : "altr,rst-mgr"
 - reg : Should contain 1 register ranges(address and length)
+- altr,modrst-offset : Should contain the offset of the first modrst register.
 - #reset-cells: 1
 
 Example:
@@ -10,4 +11,5 @@ Example:
 		#reset-cells = <1>;
 		compatible = "altr,rst-mgr";
 		reg = <0xffd05000 0x1000>;
+		altr,modrst-offset = <0x10>;
 	};
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
index 34c1505774bf..5d3791e789c6 100644
--- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
@@ -5,6 +5,7 @@ Required properties:
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: rtc alarm/event interrupt
+- clocks: phandle to input clock.
 
 Example:
 
@@ -12,4 +13,5 @@ rtc@fffffe00 {
 	compatible = "atmel,at91rm9200-rtc";
 	reg = <0xfffffe00 0x100>;
 	interrupts = <1 4 7>;
+	clocks = <&clk32k>;
 };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
index 4ba4dbd34289..43a83668673a 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
@@ -8,6 +8,7 @@ Required properties:
 			    Wakeup generation for event Alarm. It can also be
 			    used to control an external PMIC via the
 			    pmic_power_en pin.
+	- "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
 - reg: Address range of rtc register set
 - interrupts: rtc timer, alarm interrupts in order
 - interrupt-parent: phandle for the interrupt controller
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index 8d63f1da07aa..a875997f2062 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -7,8 +7,9 @@ Required properties:
   * "mediatek,mt8173-uart" for MT8173 compatible UARTS
   * "mediatek,mt6589-uart" for MT6589 compatible UARTS
   * "mediatek,mt6582-uart" for MT6582 compatible UARTS
+  * "mediatek,mt6580-uart" for MT6580 compatible UARTS
   * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582, 
-	MT6577)
+	MT6580, MT6577)
 
 - reg: The base address of the UART register bank.
 
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index 7c4408ff4b83..53a3029b7589 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -2,7 +2,11 @@ Mediatek MT6577, MT6572 and MT6589 Timers
 ---------------------------------------
 
 Required properties:
-- compatible: Should be "mediatek,mt6577-timer"
+- compatible should contain:
+	* "mediatek,mt6589-timer" for MT6589 compatible timers
+	* "mediatek,mt6580-timer" for MT6580 compatible timers
+	* "mediatek,mt6577-timer" for all compatible timers (MT6589, MT6580,
+		MT6577)
 - reg: Should contain location and length for timers register.
 - clocks: Clocks driving the timer hardware. This list should include two
 	clocks. The order is system clock and as second clock the RTC clock.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index d444757c4d9e..d3fbd1f30eb4 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -46,6 +46,7 @@ chipone		ChipOne
 chipspark	ChipSPARK
 chrp	Common Hardware Reference Platform
 chunghwa	Chunghwa Picture Tubes Ltd.
+ciaa	Computadora Industrial Abierta Argentina
 cirrus	Cirrus Logic, Inc.
 cloudengines	Cloud Engines, Inc.
 cnm	Chips&Media, Inc.
@@ -135,6 +136,7 @@ mitsubishi	Mitsubishi Electric Corporation
 mosaixtech	Mosaix Technologies, Inc.
 moxa	Moxa
 mpl	MPL AG
+msi	Micro-Star International Co. Ltd.
 mti	Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
 mundoreader	Mundo Reader S.L.
 murata	Murata Manufacturing Co., Ltd.
@@ -143,6 +145,7 @@ national	National Semiconductor
 neonode		Neonode Inc.
 netgear	NETGEAR
 netlogic	Broadcom Corporation (formerly NetLogic Microsystems)
+netxeon		Shenzhen Netxeon Technology CO., LTD
 newhaven	Newhaven Display International
 nintendo	Nintendo
 nokia	Nokia
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index a4d869744f59..86fa6de1019b 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -6,6 +6,7 @@ Required properties:
 - compatible: must be "atmel,at91sam9260-wdt".
 - reg: physical base address of the controller and length of memory mapped
   region.
+- clocks: phandle to input clock.
 
 Optional properties:
 - timeout-sec: contains the watchdog timeout in seconds.
@@ -39,6 +40,7 @@ Example:
 		compatible = "atmel,at91sam9260-wdt";
 		reg = <0xfffffd40 0x10>;
 		interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+		clocks = <&clk32k>;
 		timeout-sec = <15>;
 		atmel,watchdog-type = "hardware";
 		atmel,reset-type = "all";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 917aa318929d..233159d2eaab 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -41,6 +41,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
 	at91sam9x35ek.dtb
 dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-kizbox2.dtb \
+	at91-sama5d2_xplained.dtb \
 	at91-sama5d3_xplained.dtb \
 	sama5d31ek.dtb \
 	sama5d33ek.dtb \
@@ -176,6 +177,8 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-km_kirkwood.dtb \
 	kirkwood-laplug.dtb \
 	kirkwood-lschlv2.dtb \
+	kirkwood-lswvl.dtb \
+	kirkwood-lswxl.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-mplcec4.dtb \
 	kirkwood-mv88f6281gtw-ge.dtb \
@@ -211,6 +214,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ts419-6281.dtb \
 	kirkwood-ts419-6282.dtb
 dtb-$(CONFIG_ARCH_LPC18XX) += \
+	lpc4337-ciaa.dtb \
 	lpc4350-hitex-eval.dtb \
 	lpc4357-ea4357-devkit.dtb
 dtb-$(CONFIG_ARCH_LPC32XX) += \
@@ -331,6 +335,8 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-sabreauto.dtb \
 	imx6sx-sdb-reva.dtb \
 	imx6sx-sdb.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += \
+	imx6ul-14x14-evk.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-sdb.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
@@ -390,6 +396,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-cm-t3530.dtb \
 	omap3-cm-t3730.dtb \
 	omap3-devkit8000.dtb \
+	omap3-devkit8000-lcd43.dtb \
+	omap3-devkit8000-lcd70.dtb \
 	omap3-evm.dtb \
 	omap3-evm-37xx.dtb \
 	omap3-gta04a3.dtb \
@@ -409,15 +417,19 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-overo-alto35.dtb \
 	omap3-overo-chestnut43.dtb \
 	omap3-overo-gallop43.dtb \
+	omap3-overo-palo35.dtb \
 	omap3-overo-palo43.dtb \
 	omap3-overo-storm-alto35.dtb \
 	omap3-overo-storm-chestnut43.dtb \
 	omap3-overo-storm-gallop43.dtb \
+	omap3-overo-storm-palo35.dtb \
 	omap3-overo-storm-palo43.dtb \
 	omap3-overo-storm-summit.dtb \
 	omap3-overo-storm-tobi.dtb \
+	omap3-overo-storm-tobiduo.dtb \
 	omap3-overo-summit.dtb \
 	omap3-overo-tobi.dtb \
+	omap3-overo-tobiduo.dtb \
 	omap3-pandora-600mhz.dtb \
 	omap3-pandora-1ghz.dtb \
 	omap3-sbc-t3517.dtb \
@@ -426,6 +438,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-thunder.dtb \
 	omap3-zoom3.dtb
 dtb-$(CONFIG_SOC_TI81XX) += \
+	dm8148-evm.dtb \
+	dm8148-t410.dtb \
 	dm8168-evm.dtb
 dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-baltos-ir5221.dtb \
@@ -438,7 +452,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-nano.dtb \
 	am335x-pepper.dtb \
 	am335x-lxm.dtb \
-	am335x-chiliboard.dtb
+	am335x-chiliboard.dtb \
+	am335x-wega-rdk.dtb
 dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-duovero-parlor.dtb \
 	omap4-panda.dtb \
@@ -464,6 +479,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
 dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-lacie-d2-network.dtb \
 	orion5x-lacie-ethernet-disk-mini-v2.dtb \
+	orion5x-linkstation-lswtgl.dtb \
+	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
 	orion5x-rd88f5182-nas.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \
@@ -488,7 +505,12 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3288-evb-act8846.dtb \
 	rk3288-evb-rk808.dtb \
 	rk3288-firefly-beta.dtb \
-	rk3288-firefly.dtb
+	rk3288-firefly.dtb \
+	rk3288-r89.dtb \
+	rk3288-veyron-jerry.dtb \
+	rk3288-veyron-minnie.dtb \
+	rk3288-veyron-pinky.dtb \
+	rk3288-veyron-speedy.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += \
 	s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_S3C64XX) += \
@@ -513,12 +535,15 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7790-lager.dtb \
 	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
+	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
+	r8a7794-silk.dtb \
 	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
 	socfpga_cyclone5_socdk.dtb \
+	socfpga_cyclone5_de0_sockit.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
 	socfpga_vt.dtb
@@ -541,7 +566,9 @@ dtb-$(CONFIG_ARCH_STI) += \
 	stih416-b2020.dtb \
 	stih416-b2020e.dtb \
 	stih418-b2199.dtb
-dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb
+dtb-$(CONFIG_ARCH_STM32)+= \
+	stm32f429-disco.dtb \
+	stm32429i-eval.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
@@ -551,6 +578,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-hackberry.dtb \
 	sun4i-a10-hyundai-a7hd.dtb \
 	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-itead-iteaduino-plus.dts \
 	sun4i-a10-jesurun-q5.dtb \
 	sun4i-a10-marsboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
@@ -598,6 +626,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a23-ippo-q8h-v1.2.dtb \
 	sun8i-a33-et-q8-v1.6.dtb \
 	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-ippo-q8h-v1.2.dtb \
 	sun8i-a33-sinlinx-sina33.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
@@ -639,10 +668,11 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-ccu8540.dtb \
 	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
-	uniphier-ph1-sld3-ref.dtb \
 	uniphier-ph1-ld4-ref.dtb \
+	uniphier-ph1-ld6b-ref.dtb \
 	uniphier-ph1-pro4-ref.dtb \
-	uniphier-ph1-sld8-ref.dtb
+	uniphier-ph1-sld3-ref.dtb \
+	uniphier-ph1-sld8-ref.dtb 
 dtb-$(CONFIG_ARCH_VERSATILE) += \
 	versatile-ab.dtb \
 	versatile-pb.dtb
@@ -702,6 +732,7 @@ dtb-$(CONFIG_MACH_DOVE) += \
 	dove-dove-db.dtb \
 	dove-sbc-a510.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt6580-evbp1.dtb \
 	mt6589-aquaris5.dtb \
 	mt6592-evb.dtb \
 	mt8127-moose.dtb \
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 5c42d259fa68..eadbba32386d 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -68,16 +68,26 @@
 
 &lcdc {
 	status = "okay";
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
 };
 
-/ {
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
+&i2c0 {
+	tda19988 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
 		pinctrl-names = "default", "off";
 		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
 		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-		status = "okay";
+
+		port {
+			hdmi_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 765be2766eb0..1942a5c8132d 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -136,16 +136,29 @@
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <12000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT",
-			"LINE1L",               "Line In",
-			"LINE1R",               "Line In";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM335x-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <12000000>;
+		};
 	};
 };
 
@@ -342,7 +355,7 @@
 		>;
 	};
 
-	am335x_evm_audio_pins: am335x_evm_audio_pins {
+	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
 			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
@@ -351,6 +364,15 @@
 		>;
 	};
 
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
 			0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
@@ -460,6 +482,7 @@
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
@@ -575,19 +598,21 @@
 #include "tps65910.dtsi"
 
 &mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&am335x_evm_audio_pins>;
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
-		status = "okay";
+	status = "okay";
 
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &tps {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 156d05efcb70..315bb02c9920 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -141,14 +141,26 @@
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVMSK";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM335x-EVMSK";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24000000>;
+		};
 	};
 
 	panel {
@@ -396,6 +408,15 @@
 		>;
 	};
 
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
 			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
@@ -462,6 +483,7 @@
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
@@ -661,19 +683,21 @@
 };
 
 &mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcasp1_pins>;
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
-		status = "okay";
+	status = "okay";
 
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &tscadc {
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
new file mode 100644
index 000000000000..4d28fc3aac69
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -0,0 +1,368 @@
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "Phytec AM335x phyCORE";
+	compatible = "phytec,am335x-phycore-som", "ti,am33xx";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &rtc;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+	};
+};
+
+/* Crypto Module */
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet0_pins: pinmux_ethernet0 {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			0x114 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txen.rmii1_txen */
+			0x124 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd1.rmii1_txd1 */
+			0x128 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd0.rmii1_txd0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+		>;
+	};
+
+	mdio_pins: pinmux_mdio {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins>;
+	status = "okay";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+/* I2C Busses */
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0 {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: pmic@2d {
+		reg = <0x2d>;
+	};
+
+	i2c_eeprom: eeprom@52 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+		status = "disabled";
+	};
+
+	i2c_rtc: rtc@68 {
+		compatible = "rv4162";
+		reg = <0x68>;
+		status = "disabled";
+	};
+};
+
+/* NAND memory */
+&am33xx_pinmux {
+		nandflash_pins: pinmux_nandflash {
+			pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x1000000>;   /* CS0: NAND */
+	nandflash: nand@0,0 {
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <30>;
+		gpmc,cs-wr-off-ns = <30>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <30>;
+		gpmc,wr-cycle-ns = <30>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <50>;
+		gpmc,cycle2cycle-diffcsen;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <30>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		elm_id = <&elm>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "xload";
+			reg = <0x0 0x20000>;
+		};
+		partition@1 {
+			label = "xload_backup1";
+			reg = <0x20000 0x20000>;
+		};
+		partition@2 {
+			label = "xload_backup2";
+			reg = <0x40000 0x20000>;
+		};
+		partition@3 {
+			label = "xload_backup3";
+			reg = <0x60000 0x20000>;
+		};
+		partition@4 {
+			label = "barebox";
+			reg = <0x80000 0x80000>;
+		};
+		partition@5 {
+			label = "bareboxenv";
+			reg = <0x100000 0x40000>;
+		};
+		partition@6 {
+			label = "oftree";
+			reg = <0x140000 0x40000>;
+		};
+		partition@7 {
+			label = "kernel";
+			reg = <0x180000 0x800000>;
+		};
+		partition@8 {
+			label = "root";
+			reg = <0x980000 0x0>;
+		};
+	};
+};
+
+/* Power */
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-name = "vdig1_1p8v";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&vbat {
+	regulator-name = "vbat";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+	regulator-boot-on;
+};
+
+/* SPI Busses */
+&am33xx_pinmux {
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_clk.spi0_clk */
+			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_d0.spi0_d0 */
+			0x158 (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
+			0x15c (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
+		>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	serial_flash: m25p80@0 {
+		compatible = "m25p80";
+		spi-max-frequency = <48000000>;
+		reg = <0x0>;
+		m25p,fast-read;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "xload";
+			reg = <0x0 0x20000>;
+		};
+		partition@1 {
+			label = "barebox";
+			reg = <0x20000 0x80000>;
+		};
+		partition@2 {
+			label = "bareboxenv";
+			reg = <0xa0000 0x20000>;
+		};
+		partition@3 {
+			label = "oftree";
+			reg = <0xc0000 0x20000>;
+		};
+		partition@4 {
+			label = "kernel";
+			reg = <0xe0000 0x0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts
new file mode 100644
index 000000000000..6431b7db8109
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-wega-rdk.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-wega.dtsi"
+
+/* SoM */
+&i2c_eeprom {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
new file mode 100644
index 000000000000..5e541bd1b45a
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	model = "Phytec AM335x phyBOARD-WEGA";
+	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
+
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+	dcan1_pins: pinmux_dcan1 {
+		pinctrl-single,pins = <
+			0x168 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			0x16c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux_ethernet1 {
+		pinctrl-single,pins = <
+			0x40 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			0x48 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			0x4c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			0x50 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			0x54 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ben1.mii2_col */
+		>;
+	};
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <2>;
+};
+
+&mac {
+	slaves = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+	dual_emac = <1>;
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1 {
+		pinctrl-single,pins = <
+			0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			0x0FC (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			0x160 (PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			0x178 (PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
+			0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart1_rtsn.uart1_rtsn */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/* USB */
+&cppi41dma {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index b76f9a2ce05d..9117c1a1a4e2 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -103,6 +103,15 @@
 			#size-cells = <1>;
 			ranges = <0 0x44c00000 0x280000>;
 
+			wkup_m3: wkup_m3@100000 {
+				compatible = "ti,am3352-wkup-m3";
+				reg = <0x100000 0x4000>,
+				      <0x180000	0x2000>;
+				reg-names = "umem", "dmem";
+				ti,hwmods = "wkup_m3";
+				ti,pm-firmware = "am335x-pm-firmware.elf";
+			};
+
 			prcm: prcm@200000 {
 				compatible = "ti,am3-prcm";
 				reg = <0x200000 0x4000>;
@@ -144,6 +153,14 @@
 					};
 				};
 
+				wkup_m3_ipc: wkup_m3_ipc@1324 {
+					compatible = "ti,am3352-wkup-m3-ipc";
+					reg = <0x1324 0x24>;
+					interrupts = <78>;
+					ti,rproc = <&wkup_m3>;
+					mboxes = <&mailbox &mbox_wkupm3>;
+				};
+
 				scm_clockdomains: clockdomains {
 				};
 			};
@@ -762,14 +779,6 @@
 			reg = <0x40300000 0x10000>; /* 64k */
 		};
 
-		wkup_m3: wkup_m3@44d00000 {
-			compatible = "ti,am3353-wkup-m3";
-			reg = <0x44d00000 0x4000	/* M3 UMEM */
-			       0x44d80000 0x2000>;	/* M3 DMEM */
-			ti,hwmods = "wkup_m3";
-			ti,no-reset-on-init;
-		};
-
 		elm: elm@48080000 {
 			compatible = "ti,am3352-elm";
 			reg = <0x48080000 0x2000>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 359a3b6daf4f..564900b9fcce 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -23,6 +23,11 @@
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
 		ethernet0 = &cpsw_emac0;
 		ethernet1 = &cpsw_emac1;
 	};
@@ -59,6 +64,27 @@
 		interrupt-parent = <&gic>;
 	};
 
+	scu: scu@48240000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x48240000 0x100>;
+	};
+
+	global_timer: timer@48240200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x48240200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&dpll_mpu_m2_ck>;
+	};
+
+	local_timer: timer@48240600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x48240600 0x100>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&dpll_mpu_m2_ck>;
+	};
+
 	l2-cache-controller@48242000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x48242000 0x1000>;
@@ -83,6 +109,15 @@
 			#size-cells = <1>;
 			ranges = <0 0x44c00000 0x287000>;
 
+			wkup_m3: wkup_m3@100000 {
+				compatible = "ti,am4372-wkup-m3";
+				reg = <0x100000 0x4000>,
+				      <0x180000	0x2000>;
+				reg-names = "umem", "dmem";
+				ti,hwmods = "wkup_m3";
+				ti,pm-firmware = "am335x-pm-firmware.elf";
+			};
+
 			prcm: prcm@1f0000 {
 				compatible = "ti,am4-prcm";
 				reg = <0x1f0000 0x11000>;
@@ -128,6 +163,14 @@
 					};
 				};
 
+				wkup_m3_ipc: wkup_m3_ipc@1324 {
+					compatible = "ti,am4372-wkup-m3-ipc";
+					reg = <0x1324 0x44>;
+					interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+					ti,rproc = <&wkup_m3>;
+					mboxes = <&mailbox &mbox_wkupm3>;
+				};
+
 				scm_clockdomains: clockdomains {
 				};
 			};
@@ -309,7 +352,8 @@
 		};
 
 		rtc: rtc@44e3e000 {
-			compatible = "ti,am4372-rtc","ti,da830-rtc";
+			compatible = "ti,am4372-rtc", "ti,am3352-rtc",
+				     "ti,da830-rtc";
 			reg = <0x44e3e000 0x1000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -528,8 +572,11 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
+			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>,
+				 <&dpll_clksel_mac_clk>;
+			clock-names = "fck", "cpts", "50mclk";
+			assigned-clocks = <&dpll_clksel_mac_clk>;
+			assigned-clock-rates = <50000000>;
 			status = "disabled";
 			cpdma_channels = <8>;
 			ale_entries = <1024>;
@@ -866,7 +913,12 @@
 			usb1: usb@48390000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x48390000 0x10000>;
-				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy1>;
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
@@ -890,7 +942,12 @@
 			usb2: usb@483d0000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x483d0000 0x10000>;
-				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy2>;
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 84aa30c3235a..215775dc6948 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -21,12 +21,11 @@
 
 	aliases {
 		display0 = &lcd0;
-		serial3 = &uart3;
 	};
 
-	vmmcsd_fixed: fixedregulator-sd {
+	evm_v3_3d: fixedregulator-v3_3d {
 		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
+		regulator-name = "evm_v3_3d";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		enable-active-high;
@@ -83,17 +82,6 @@
 		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
 		label = "lcd";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-
 		panel-timing {
 			clock-frequency = <33000000>;
 			hactive = <800>;
@@ -124,6 +112,32 @@
 		clock-frequency = <12000000>;
 	};
 
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM437x-GP-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-frequency = <12000000>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <12000000>;
+		};
+	};
 };
 
 &am43xx_pinmux {
@@ -217,7 +231,6 @@
 
 	nand_flash_x8: nand_flash_x8 {
 		pinctrl-single,pins = <
-			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
 			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
 			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
 			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
@@ -270,7 +283,7 @@
 		>;
 	};
 
-	lcd_pins: lcd_pins {
+	display_mux_pins: display_mux_pins {
 		pinctrl-single,pins = <
 			/* GPIO 5_8 to select LCD / HDMI */
 			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
@@ -409,6 +422,60 @@
 			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
 		>;
 	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_sleep_pins: mcasp1_sleep_pins {
+		pinctrl-single,pins = <
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	gpio0_pins: gpio0_pins {
+		pinctrl-single,pins = <
+			0x26c (PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
+		>;
+	};
+
+	emmc_pins_default: emmc_pins_default {
+		pinctrl-single,pins = <
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+		>;
+	};
+
+	emmc_pins_sleep: emmc_pins_sleep {
+		pinctrl-single,pins = <
+			0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
+			0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
+			0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
+			0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
+			0x10 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+			0x14 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+			0x18 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+			0x1c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+			0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+			0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
+		>;
+	};
 };
 
 &i2c0 {
@@ -455,6 +522,8 @@
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		dcdc6: regulator-dcdc6 {
@@ -462,6 +531,8 @@
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		ldo1: regulator-ldo1 {
@@ -521,6 +592,19 @@
 			};
 		};
 	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
+		AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+		DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+		DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
+	};
 };
 
 &epwmss0 {
@@ -542,7 +626,23 @@
 };
 
 &gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_pins>;
 	status = "okay";
+
+	p23 {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		/* SelEMMCorNAND selects between eMMC and NAND:
+		 * Low: NAND
+		 * High: eMMC
+		 * When changing this line make sure the newly
+		 * selected device node is enabled and the previously
+		 * selected device node is disabled.
+		 */
+		output-low;
+		line-name = "SelEMMCorNAND";
+	};
 };
 
 &gpio1 {
@@ -558,19 +658,48 @@
 };
 
 &gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
 	ti,no-reset-on-init;
+
+	p8 {
+		/*
+		 * SelLCDorHDMI selects between display and audio paths:
+		 * Low: HDMI display with audio via HDMI
+		 * High: LCD display with analog audio via aic3111 codec
+		 */
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SelLCDorHDMI";
+	};
 };
 
 &mmc1 {
 	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
+	vmmc-supply = <&evm_v3_3d>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
+/* eMMC sits on mmc2 */
+&mmc2 {
+	/*
+	 * When enabling eMMC, disable GPMC/NAND and set
+	 * SelEMMCorNAND to output-high
+	 */
+	status = "disabled";
+	vmmc-supply = <&evm_v3_3d>;
+	bus-width = <8>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&emmc_pins_default>;
+	pinctrl-1 = <&emmc_pins_sleep>;
+	ti,non-removable;
+};
+
 &mmc3 {
 	status = "okay";
 	/* these are on the crossbar and are outlined in the
@@ -651,6 +780,10 @@
 };
 
 &gpmc {
+	/*
+	 * When enabling GPMC, disable eMMC and set
+	 * SelEMMCorNAND to output-low
+	 */
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_flash_x8>;
@@ -790,3 +923,21 @@
 		};
 	};
 };
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>; /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index c17097d2c167..22af44894c66 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -32,14 +32,29 @@
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM437x-SK-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM437x-SK-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24000000>;
+		};
 	};
 
 	matrix_keypad: matrix_keypad@0 {
@@ -364,6 +379,15 @@
 		>;
 	};
 
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	lcd_pins: lcd_pins {
 		pinctrl-single,pins = <
 			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
@@ -480,6 +504,7 @@
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
@@ -640,8 +665,10 @@
 };
 
 &mcasp1 {
-	pinctrl-names = "default";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 795d68af6df9..86c2dfbe8875 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -14,6 +14,7 @@
 #include <dt-bindings/pinctrl/am43xx.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
@@ -31,21 +32,18 @@
 		enable-active-high;
 	};
 
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
 	lcd0: display {
 		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
 		label = "lcd";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-
 		panel-timing {
 			clock-frequency = <33000000>;
 			hactive = <800>;
@@ -108,6 +106,38 @@
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
 		default-brightness-level = <8>;
 	};
+
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM43-EPOS-EVM";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MIC1LP", "Microphone Jack",
+			"MIC1RP", "Microphone Jack",
+			"MIC1LP", "MICBIAS",
+			"MIC1RP", "MICBIAS",
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPL",
+			"Speaker", "SPR";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-frequency = <12000000>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3111>;
+			system-clock-frequency = <12000000>;
+		};
+	};
 };
 
 &am43xx_pinmux {
@@ -278,7 +308,7 @@
 			>;
 		};
 
-		lcd_pins: lcd_pins {
+		display_mux_pins: display_mux_pins {
 			pinctrl-single,pins = <
 				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
 				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
@@ -320,6 +350,24 @@
 				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 			>;
 		};
+
+		mcasp1_pins: mcasp1_pins {
+			pinctrl-single,pins = <
+				0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+				0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+				0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+				0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+			>;
+		};
+
+		mcasp1_sleep_pins: mcasp1_sleep_pins {
+			pinctrl-single,pins = <
+				0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
 };
 
 &mmc1 {
@@ -399,6 +447,15 @@
 			regulator-always-on;
 		};
 
+		dcdc4: regulator-dcdc4 {
+			compatible = "ti,tps65218-dcdc4";
+			regulator-name = "vdcdc4";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
 		dcdc5: regulator-dcdc5 {
 			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
@@ -441,6 +498,23 @@
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
 	};
+
+	tlv320aic3111: tlv320aic3111@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3111";
+		reg = <0x18>;
+		status = "okay";
+
+		ai31xx-micbias-vg = <MICBIAS_2_0V>;
+
+		/* Regulators */
+		HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		SPRVDD-supply = <&vbat>; /* vbat */
+		SPLVDD-supply = <&vbat>; /* vbat */
+		AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
+		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
+	};
 };
 
 &i2c2 {
@@ -458,7 +532,21 @@
 };
 
 &gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
+
+	p1 {
+		/*
+		 * SelLCDorHDMI selects between display and audio paths:
+		 * Low: HDMI display with audio via HDMI
+		 * High: LCD display with analog audio via aic3111 codec
+		 */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SelLCDorHDMI";
+	};
 };
 
 &gpio3 {
@@ -686,3 +774,21 @@
 		};
 	};
 };
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index d0c0dfa4ec48..cc88728d751d 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -486,6 +486,15 @@
 		reg = <0x4238>;
 	};
 
+	dpll_clksel_mac_clk: dpll_clksel_mac_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5_ck>;
+		reg = <0x4234>;
+		ti,bit-shift = <2>;
+		ti,dividers = <2>, <5>;
+	};
+
 	clk_32k_mosc_ck: clk_32k_mosc_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index f9a4b317ed2f..3a05b94f59ed 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -580,7 +580,6 @@
 
 	vmmc-supply = <&ldo1_reg>;
 	vmmc_aux-supply = <&vdd_3v3>;
-	pbias-supply = <&pbias_mmc_reg>;
 	bus-width = <4>;
 	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
 };
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 67a0ab0f71e0..e9a381741ce1 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -176,6 +176,10 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
+				arm,double-linefill-incr = <1>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <1>;
+				prefetch-data = <1>;
 			};
 
 			scu@c000 {
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index fd4f6fd8a2e8..353c92532e7a 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -81,10 +81,6 @@
 				pinctrl-0 = <&i2c0_pins>;
 				status = "okay";
 				clock-frequency = <100000>;
-				/*
-				 * The EEPROM located at adresse 54 is needed
-				 * for the boot - DO NOT ERASE IT -
-				 */
 
 				expander0: pca9555@20 {
 					compatible = "nxp,pca9555";
@@ -111,6 +107,10 @@
 					reg = <0x21>;
 				};
 
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
 			};
 
 			serial@12000 {
@@ -301,9 +301,11 @@
 	reg_sata0: pwr-sata0 {
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
 		enable-active-high;
 		regulator-always-on;
-
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	reg_5v_sata0: v5-sata0 {
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 04ecfe6e2bc6..f9f2347d9995 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -143,6 +143,10 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
+				arm,double-linefill-incr = <1>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <1>;
+				prefetch-data = <1>;
 			};
 
 			scu@c000 {
@@ -450,7 +454,7 @@
 			};
 
 			xor@60800 {
-				compatible = "marvell,orion-xor";
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60a00 0x100>;
 				clocks = <&gateclk 22>;
@@ -470,7 +474,7 @@
 			};
 
 			xor@60900 {
-				compatible = "marvell,orion-xor";
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
 				clocks = <&gateclk 28>;
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index fc9864f85fc2..dc6efd386dbc 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -104,6 +104,10 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
+				arm,double-linefill-incr = <1>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <1>;
+				prefetch-data = <1>;
 			};
 
 			scu@c000 {
@@ -325,7 +329,7 @@
 			};
 
 			xor@60800 {
-				compatible = "marvell,orion-xor";
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60a00 0x100>;
 				clocks = <&gateclk 22>;
@@ -345,7 +349,7 @@
 			};
 
 			xor@60900 {
-				compatible = "marvell,orion-xor";
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
 				clocks = <&gateclk 28>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
new file mode 100644
index 000000000000..e8d63afdb135
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -0,0 +1,134 @@
+/*
+ * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+
+/ {
+	model = "Atmel SAMA5D2 Xplained";
+	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x80000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@00300000 {
+			status = "okay";
+		};
+
+		usb1: ohci@00400000 {
+			num-ports = <3>;
+			status = "okay";
+		};
+
+		usb2: ehci@00500000 {
+			status = "okay";
+		};
+
+		apb {
+			spi0: spi@f8000000 {
+				status = "okay";
+
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					reg = <0>;
+					spi-max-frequency = <50000000>;
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			uart1: serial@f8020000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				status = "okay";
+
+				at24@54 {
+					compatible = "atmel,24c02";
+					reg = <0x54>;
+					pagesize = <16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 22ad7c959103..07f46963335b 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -131,6 +131,15 @@
 			};
 
 			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
 				atmel,adc-vref = <3300>;
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index d782f2926b73..49a59c7e4a5d 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -100,6 +100,15 @@
 			};
 
 			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
 				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
 				atmel,adc-vref = <3300>;
 				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index e3cfb9972f54..60edd8baebb8 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -359,6 +359,7 @@
 				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
 				reg = <0xfffffd00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 
 				watchdog {
 					compatible = "atmel,at91rm9200-wdt";
@@ -369,6 +370,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffe00 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 				status = "disabled";
 			};
 
@@ -378,8 +380,8 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
 					      18 IRQ_TYPE_LEVEL_HIGH 0
 					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			tcb1: timer@fffa4000 {
@@ -388,8 +390,8 @@
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
 					      21 IRQ_TYPE_LEVEL_HIGH 0
 					      22 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			i2c0: i2c@fffb8000 {
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 4bc347549102..be9c027ddd97 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -359,11 +359,13 @@
 			rstc@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffd30 {
@@ -379,8 +381,8 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
 					      18 IRQ_TYPE_LEVEL_HIGH 0
 					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			tcb1: timer@fffdc000 {
@@ -389,8 +391,8 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
 					      27 IRQ_TYPE_LEVEL_HIGH 0
 					      28 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			pinctrl@fffff400 {
@@ -973,6 +975,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index b2c44a07a3d0..ce1e3e94a40c 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -119,8 +119,8 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			usb1: gadget@fffa4000 {
@@ -820,11 +820,13 @@
 			rstc@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			pit: timer@fffffd30 {
@@ -846,6 +848,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index e36d966ef5e8..f1f5fa3a9e6e 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -377,18 +377,20 @@
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfff7c000 0x100>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb_clk>, <&slow_xtal>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			rstc@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			pinctrl@fffff200 {
@@ -902,6 +904,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
index cfd7044616d7..27de7dc0f0e0 100644
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G15 SoC";
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
index 26b0444b0f96..d1d2b400f1c6 100644
--- a/arch/arm/boot/dts/at91sam9g15ek.dts
+++ b/arch/arm/boot/dts/at91sam9g15ek.dts
@@ -8,9 +8,34 @@
  */
 /dts-v1/;
 #include "at91sam9g15.dtsi"
+#include "at91sam9x5dm.dtsi"
 #include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G15-EK";
 	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+			};
+		};
+	};
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index e35c2fcf8298..ff4115886f97 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
 #include "at91sam9x5_macb0.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
index 641a9bf89ed1..23ec8b13f30a 100644
--- a/arch/arm/boot/dts/at91sam9g35ek.dts
+++ b/arch/arm/boot/dts/at91sam9g35ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91sam9g35.dtsi"
+#include "at91sam9x5dm.dtsi"
 #include "at91sam9x5ek.dtsi"
 
 / {
@@ -20,6 +21,26 @@
 				phy-mode = "rmii";
 				status = "okay";
 			};
+
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+			};
 		};
 	};
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 18177f5a7464..18b8b9e29704 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -387,6 +387,7 @@
 			rstc@fffffd00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffd30 {
@@ -400,22 +401,23 @@
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9rl-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			tcb0: timer@fff7c000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfff7c000 0x100>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			tcb1: timer@fffd4000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffd4000 0x100>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			dma: dma-controller@ffffec00 {
@@ -498,23 +500,31 @@
 				};
 
 				isi {
-					pinctrl_isi: isi-0 {
-						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
-							      AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* D9 */
-							      AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
-							      AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* D11 */
-							      AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
-							      AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
-							      AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
-							      AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
-							      AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
-							      AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
-							      AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
-							      AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
-							      AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
-							      AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
-							      AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* HSYNC */
-							      AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* MCK */>;
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+							AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+							AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+							AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+							AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+							AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+							AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+							AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+							AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+							AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+							AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+							AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+							AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
 					};
 				};
 
@@ -1067,9 +1077,11 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
 				clocks = <&isi_clk>;
 				clock-names = "isi_clk";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi>;
 				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			pwm0: pwm@fffb8000 {
@@ -1113,6 +1125,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -1247,6 +1260,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffdb0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 1375d3362603..d1ae60a855d4 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -63,6 +63,25 @@
 
 			i2c0: i2c@fff84000 {
 				status = "okay";
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
 			};
 
 			i2c1: i2c@fff88000 {
@@ -101,6 +120,22 @@
 			};
 
 			pinctrl@fffff200 {
+				camera_sensor {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
 				mmc0 {
 					pinctrl_board_mmc0: mmc0-board {
 						atmel,pins =
@@ -155,6 +190,18 @@
 				status = "okay";
 			};
 
+			isi@fffb4000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				status = "okay";
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+					};
+				};
+			};
+
 			pwm0: pwm@fffb8000 {
 				status = "okay";
 
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 5c2a8c8c8bd4..32bc9a189db0 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -376,6 +376,7 @@
 			rstc@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffe30 {
@@ -388,6 +389,7 @@
 			shdwc@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			sckc@fffffe50 {
@@ -431,16 +433,44 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			tcb1: timer@f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9n12-hlcdc";
+				reg = <0xf8038000 0x2000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk", "sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
 			};
 
 			dma: dma-controller@ffffec00 {
@@ -475,6 +505,49 @@
 					};
 				};
 
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
@@ -891,6 +964,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -901,6 +975,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffeb0 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index eab17fcace6d..efa75064d38a 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -128,6 +128,22 @@
 				};
 			};
 
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+
 			usb1: gadget@f803c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usb1_vbus_sense>;
@@ -161,6 +177,23 @@
 		};
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -194,6 +227,34 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "qd,qd43003c0-40", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "okay";
+	};
+
 	sound {
 		compatible = "atmel,asoc-wm8904";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index c9920c64791c..a0b90aedd3b8 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -121,8 +121,8 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			mmc0: mmc@fffa4000 {
@@ -1018,11 +1018,13 @@
 			rstc@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffd30 {
@@ -1036,6 +1038,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
@@ -1083,6 +1086,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffe00 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index 499cdc81f4c0..d9054e8167b7 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
 #include "at91sam9x5_macb0.dtsi"
 #include "at91sam9x5_can.dtsi"
 
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
index 343d32818ca3..fcb67180ea26 100644
--- a/arch/arm/boot/dts/at91sam9x35ek.dts
+++ b/arch/arm/boot/dts/at91sam9x35ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91sam9x35.dtsi"
+#include "at91sam9x5dm.dtsi"
 #include "at91sam9x5ek.dtsi"
 
 / {
@@ -20,6 +21,25 @@
 				phy-mode = "rmii";
 				status = "okay";
 			};
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+			};
 		};
 	};
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index b6c8df8d380e..747d8f070a5c 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -376,11 +376,13 @@
 			rstc@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shdwc@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffe30 {
@@ -418,16 +420,16 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			tcb1: timer@f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			dma0: dma-controller@ffffec00 {
@@ -1173,6 +1175,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -1183,6 +1186,7 @@
 				compatible = "atmel,at91sam9x5-rtc";
 				reg = <0xfffffeb0 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
index 485302e8233d..1629db9dd563 100644
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -13,6 +13,137 @@
 / {
 	ahb {
 		apb {
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+			};
+
 			pmc: pmc@fffffc00 {
 				periphck {
 					lcdc_clk: lcdc_clk {
@@ -20,6 +151,14 @@
 						reg = <25>;
 					};
 				};
+
+				systemck {
+					lcdck: lcdck {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi
new file mode 100644
index 000000000000..34c089fe0bc0
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi
@@ -0,0 +1,101 @@
+/*
+ * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Free Electrons
+ *
+ *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			i2c0: i2c@f8010000 {
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioA>;
+					interrupts = <7 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+
+			adc0: adc@f804c000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "disabled";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "disabled";
+	};
+
+	panel: panel {
+		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts
index 49cf59a95572..1e9cd1a8508e 100644
--- a/arch/arm/boot/dts/atlas7-evb.dts
+++ b/arch/arm/boot/dts/atlas7-evb.dts
@@ -10,6 +10,9 @@
 
 /include/ "atlas7.dtsi"
 
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "CSR SiRFatlas7 Evaluation Board";
 	compatible = "sirf,atlas7-cb", "sirf,atlas7";
@@ -106,5 +109,20 @@
 				};
 			};
 		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rearview_key {
+				label = "rearview key";
+				linux,code = <KEY_CAMERA>;
+				gpios = <&gpio_1 3 GPIO_ACTIVE_LOW>;
+				debounce_interval = <100>;
+			};
+		};
+
 	};
 };
diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi
index 3e21311f9514..83449b33de6b 100644
--- a/arch/arm/boot/dts/atlas7.dtsi
+++ b/arch/arm/boot/dts/atlas7.dtsi
@@ -21,6 +21,10 @@
 		serial5 = &uart5;
 		serial6 = &uart6;
 		serial9 = &usp2;
+		spi1 = &spi1;
+		spi2 = &usp1;
+		spi3 = &usp2;
+		spi4 = &usp3;
 	};
 	cpus {
 		#address-cells = <1>;
@@ -53,6 +57,11 @@
 		};
 	};
 
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <0 29 4>, <0 82 4>;
+	};
+
 	noc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1205,7 +1214,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x18641000 0x18641000 0x3000>,
-					 <0x18620000 0x18620000 0x1000>;
+					 <0x18620000 0x18620000 0x1000>,
+					<0x18630000 0x18630000 0x10000>;
 
 			cgum@18641000 {
 				compatible = "sirf,nocfw-cgum";
@@ -1218,6 +1228,15 @@
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 			};
+			pwm: pwm@18630000 {
+				compatible = "sirf,prima2-pwm";
+				#pwm-cells = <2>;
+				reg = <0x18630000 0x10000>;
+				clocks = <&car 138>, <&car 139>, <&car 237>,
+					<&car 240>,  <&car 140>, <&car 246>;
+				clock-names = "pwmc", "sigsrc0", "sigsrc1",
+					"sigsrc2", "sigsrc3", "sigsrc4";
+			};
 		};
 
 		gnssm {
@@ -1231,6 +1250,7 @@
 				<0x18040000 0x18040000 0x1000>,
 				<0x18050000 0x18050000 0x1000>,
 				<0x18060000 0x18060000 0x1000>,
+				<0x180b0000 0x180b0000 0x4000>,
 				<0x18100000 0x18100000 0x3000>,
 				<0x18250000 0x18250000 0x10000>,
 				<0x18200000 0x18200000 0x1000>;
@@ -1314,6 +1334,18 @@
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
+			gmac: eth@180b0000 {
+				compatible = "snps, dwc-eth-qos";
+				reg = <0x180b0000 0x4000>;
+				interrupts = <0 59 0>, <0 70 0>;
+				interrupt-names = "macirq", "macpmt";
+				clocks = <&car 39>, <&car 45>,
+				       <&car 86>, <&car 87>;
+				clock-names = "gnssm_rgmii", "gnssm_gmac",
+					"rgmii", "gmac";
+				local-mac-address = [00 00 00 00 00 00];
+				phy-mode = "rgmii";
+			};
 			dspub@18250000 {
 				compatible = "dx,cc44p";
 				reg = <0x18250000 0x10000>;
@@ -1338,18 +1370,51 @@
 			compatible = "arteris, flexnoc", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x13000000 0x13000000 0x3000>;
+			ranges = <0x13000000 0x13000000 0x3000>,
+				<0x13010000 0x13010000 0x1400>,
+				<0x13010800 0x13010800 0x100>,
+				<0x13011000 0x13011000 0x100>;
 			gpum@0x13000000 {
 				compatible = "sirf,nocfw-gpum";
 				reg = <0x13000000 0x3000>;
 			};
+			dmacsdrr: dma-controller@13010800 {
+				cell-index = <5>;
+				compatible = "sirf,atlas7-dmac-v2";
+				reg = <0x13010800 0x100>;
+				interrupts = <0 8 0>;
+				clocks = <&car 127>;
+				#dma-cells = <1>;
+				#dma-channels = <1>;
+			};
+			dmacsdrw: dma-controller@13011000 {
+				cell-index = <6>;
+				compatible = "sirf,atlas7-dmac-v2";
+				reg = <0x13011000 0x100>;
+				interrupts = <0 9 0>;
+				clocks = <&car 127>;
+				#dma-cells = <1>;
+				#dma-channels = <1>;
+			};
+			sdr@0x13010000 {
+				compatible = "sirf,atlas7-sdr";
+				reg = <0x13010000 0x1400>;
+				interrupts = <0 7 0>,
+					   <0 8 0>,
+					   <0 9 0>;
+				clocks = <&car 127>;
+				dmas = <&dmacsdrr 0>, <&dmacsdrw 0>;
+				dma-names = "tx", "rx";
+			};
 		};
 
 		mediam {
 			compatible = "arteris, flexnoc", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x16000000 0x16000000 0x00200000>,
+			ranges = <0x15000000 0x15000000 0x00600000>,
+				<0x16000000 0x16000000 0x00200000>,
+				<0x17000000 0x17000000 0x10000>,
 				<0x17020000 0x17020000 0x1000>,
 				<0x17030000 0x17030000 0x1000>,
 				<0x17040000 0x17040000 0x1000>,
@@ -1360,6 +1425,13 @@
 				<0x17070200 0x17070200 0x100>,
 				<0x170A0000 0x170A0000 0x3000>;
 
+			multimedia@15000000 {
+				compatible = "sirf,atlas7-video-codec";
+				reg = <0x15000000 0x10000>;
+				interrupts = <0 5 0>;
+				clocks = <&car 102>;
+			};
+
 			mediam@170A0000 {
 				compatible = "sirf,nocfw-mediam";
 				reg = <0x170A0000 0x3000>;
@@ -1386,6 +1458,8 @@
 			nand@17050000 {
 				compatible = "sirf,atlas7-nand";
 				reg = <0x17050000 0x10000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&nd_df_pmx>;
 				interrupts = <0 41 0>;
 				clocks = <&car 108>, <&car 112>;
 				clock-names = "nand_io", "nand_nand";
@@ -1416,6 +1490,14 @@
 				bus-width = <8>;
 			};
 
+			jpeg@17000000 {
+				compatible = "sirf,atlas7-jpeg";
+				reg = <0x17000000 0x10000>;
+				interrupts = <0 72 0>,
+					<0 73 0>;
+				clocks = <&car 103>;
+			};
+
 			usb0: usb@17060000 {
 				cell-index = <0>;
 				compatible = "sirf,atlas7-usb";
@@ -1826,7 +1908,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x13100000 0x13100000 0x20000>,
-				 <0x10e10000 0x10e10000 0x10000>;
+				<0x10e10000 0x10e10000 0x10000>,
+				<0x17010000 0x17010000 0x10000>;
 
 			lcd@13100000 {
 				compatible = "sirf,atlas7-lcdc";
@@ -1848,6 +1931,12 @@
 				clocks = <&car 54>;
 				resets = <&car 29>;
 			};
+			g2d@17010000 {
+				compatible = "sirf, atlas7-g2d";
+				reg = <0x17010000 0x10000>;
+				interrupts = <0 61 0>;
+				clocks = <&car 104>;
+			};
 
 		};
 
diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/axp152.dtsi
new file mode 100644
index 000000000000..f90ad6c64a07
--- /dev/null
+++ b/arch/arm/boot/dts/axp152.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&axp152 {
+	compatible = "x-powers,axp152";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
index 60d8389fdb6c..32bcd45ef22b 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -36,56 +36,89 @@ clocks {
 	ranges;
 
 	osc: oscillator {
+		#clock-cells = <0>;
 		compatible = "fixed-clock";
-		#clock-cells = <1>;
 		clock-frequency = <25000000>;
 	};
 
-	apb_clk: apb_clk {
-		compatible = "fixed-clock";
+	/* Cygnus ARM PLL */
+	armpll: armpll {
 		#clock-cells = <0>;
-		clock-frequency = <1000000000>;
+		compatible = "brcm,cygnus-armpll";
+		clocks = <&osc>;
+		reg = <0x19000000 0x1000>;
 	};
 
-	periph_clk: periph_clk {
-		compatible = "fixed-clock";
+	/* peripheral clock for system timer */
+	periph_clk: arm_periph_clk {
 		#clock-cells = <0>;
-		clock-frequency = <500000000>;
+		compatible = "fixed-factor-clock";
+		clocks = <&armpll>;
+		clock-div = <2>;
+		clock-mult = <1>;
 	};
 
-	sdio_clk: lcpll_ch2 {
-		compatible = "fixed-clock";
+	/* APB bus clock */
+	apb_clk: apb_clk {
 		#clock-cells = <0>;
-		clock-frequency = <200000000>;
+		compatible = "fixed-factor-clock";
+		clocks = <&armpll>;
+		clock-div = <4>;
+		clock-mult = <1>;
 	};
 
-	axi81_clk: axi81_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
+	genpll: genpll {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-genpll";
+		reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+				     "enet_sw", "audio_125", "can";
 	};
 
-	keypad_clk: keypad_clk {
-		compatible = "fixed-clock";
+	/* always 1/2 of the axi21 clock */
+	axi41_clk: axi41_clk {
 		#clock-cells = <0>;
-		clock-frequency = <31806>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll 1>;
+		clock-div = <2>;
+		clock-mult = <1>;
 	};
 
-	adc_clk: adc_clk {
-		compatible = "fixed-clock";
+	/* always 1/4 of the axi21 clock */
+	axi81_clk: axi81_clk {
 		#clock-cells = <0>;
-		clock-frequency = <1562500>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll 1>;
+		clock-div = <4>;
+		clock-mult = <1>;
 	};
 
-	pwm_clk: pwm_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1000000>;
+	lcpll0: lcpll0 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-lcpll0";
+		reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll0", "pcie_phy", "ddr_phy", "sdio",
+				     "usb_phy", "smart_card", "ch5";
 	};
 
-	lcd_clk: mipipll_ch1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
+	mipipll: mipipll {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-mipipll";
+		reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "mipipll", "ch0_unused", "ch1_lcd",
+				     "ch2_v3d", "ch3_unused", "ch4_unused",
+				     "ch5_unused";
+	};
+
+	asiu_clks: asiu_clks {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-asiu-clk";
+		reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
+
+		clocks = <&osc>;
+		clock-output-names = "keypad", "adc/touch", "pwm";
 	};
 };
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 46780bb48bbf..ab5474e5d1c8 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -14,6 +14,13 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware";
+			mboxes = <&mailbox>;
+		};
+	};
 };
 
 &gpio {
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 24f0ab59bf1b..42dcdfb769b2 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -135,3 +135,7 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index f03939311717..f18e80e0b61d 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -55,3 +55,7 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 326ce8f4e49c..64b8d10ccff8 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -24,16 +24,6 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	chipcommonA {
-		uart0: serial@0300 {
-			status = "okay";
-		};
-
-		uart1: serial@0400 {
-			status = "okay";
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -92,3 +82,7 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index d6a033b97c70..64a5e8ab65e0 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -118,3 +118,7 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index bb0cb0bfafaf..38f0c00d1aca 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -122,3 +122,7 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 21fefd4cdc25..6f50f672efbd 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -78,10 +78,20 @@
 			compatible = "arm,pl310-cache";
 			reg = <0x2000 0x1000>;
 			cache-unified;
+			arm,shared-override;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
 			cache-level = <2>;
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts =
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58dcd666257c..3b6b17560687 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -109,6 +109,20 @@
 			brcm,int-fwd-mask = <0x70000>;
 		};
 
+		irq0_aon_intc: interrupt-controller@417280 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x417280 0x8>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 0x46 0x0>,
+				     <GIC_SPI 0x44 0x0>,
+				     <GIC_SPI 0x49 0x0>;
+			brcm,int-map-mask = <0x1e3 0x18000000 0x100000>;
+			brcm,int-fwd-mask = <0x0>;
+			brcm,irq-can-wake;
+		};
+
 		hif_intr2_intc: interrupt-controller@3e1000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x3e1000 0x30>;
@@ -119,6 +133,16 @@
 			interrupt-names = "hif";
 		};
 
+                aon_pm_l2_intc: interrupt-controller@410640 {
+			compatible = "brcm,l2-intc";
+			reg = <0x410640 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 0x40 0x0>;
+			interrupt-parent = <&gic>;
+			brcm,irq-can-wake;
+		};
+
 		nand: nand@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
@@ -167,6 +191,32 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		upg_gio: gpio@40a700 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x40a700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 24>;
+		};
+
+		upg_gio_aon: gpio@4172c0 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x4172c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupts-extended = <&irq0_aon_intc 0x6>,
+					      <&aon_pm_l2_intc 0x5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
 	};
 
 	smpboot {
diff --git a/arch/arm/boot/dts/cros-ec-sbs.dtsi b/arch/arm/boot/dts/cros-ec-sbs.dtsi
new file mode 100644
index 000000000000..71f5c5ecce46
--- /dev/null
+++ b/arch/arm/boot/dts/cros-ec-sbs.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Smart battery dts fragment for devices that use cros-ec-sbs
+ *
+ * Copyright (c) 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&i2c_tunnel {
+	battery: sbs-battery@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0xb>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
index af333261d046..df4c6f1f93f9 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cx92755.dtsi
@@ -88,6 +88,13 @@
 		interrupts = <25>;
 	};
 
+	watchdog@f0000fc0 {
+		compatible = "cnxt,cx92755-wdt";
+		reg = <0xf0000fc0 0x8>;
+		clocks = <&main_clk>;
+		timeout-sec = <15>;
+	};
+
 	uc_regs: syscon@f00003a0 {
 		compatible = "cnxt,cx92755-uc", "syscon";
 		reg = <0xf00003a0 0x10>;
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts
index 90d52cc416dc..5da00806c41e 100644
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ b/arch/arm/boot/dts/cx92755_equinox.dts
@@ -64,8 +64,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 };
 
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
new file mode 100644
index 000000000000..92bacd3c8fab
--- /dev/null
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -0,0 +1,28 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dm814x.dtsi"
+
+/ {
+	model = "DM8148 EVM";
+	compatible = "ti,dm8148-evm", "ti,dm8148";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "mii";
+};
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
new file mode 100644
index 000000000000..8c4bbc7573df
--- /dev/null
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -0,0 +1,28 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dm814x.dtsi"
+
+/ {
+	model = "DM8148 EVM";
+	compatible = "hp,t410", "ti,dm8148";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "mii";
+};
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
new file mode 100644
index 000000000000..ef1e8e7a6cc6
--- /dev/null
+++ b/arch/arm/boot/dts/dm814x-clocks.dtsi
@@ -0,0 +1,109 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&scm_clocks {
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	devosc_ck: devosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	/* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */
+	auxosc_ck: auxosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <1000000000>;
+	};
+
+	sysclk4_ck: sysclk4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <222000000>;
+	};
+
+	sysclk6_ck: sysclk6_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	sysclk10_ck: sysclk10_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <48000000>;
+	};
+
+	sysclk18_ck: sysclk18_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+        cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <250000000>;
+	};
+
+};
+
+&pllss_clocks {
+
+	aud_clkin0_ck: aud_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	aud_clkin1_ck: aud_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	aud_clkin2_ck: aud_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	timer1_mux_ck: timer1_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x2e0>;
+	};
+
+	timer2_mux_ck: timer2_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x2e0>;
+	};
+};
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
new file mode 100644
index 000000000000..972c9c9e885b
--- /dev/null
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -0,0 +1,333 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,dm814";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		/*
+		 * See TRM "Table 1-317. L4LS Instance Summary", just deduct
+		 * 0x1000 from the 1-317 addresses to get the device address
+		 */
+		l4ls: l4ls@48000000 {
+			compatible = "ti,dm814-l4ls", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48000000 0x2000000>;
+
+			i2c1: i2c@28000 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "i2c1";
+				reg = <0x28000 0x1000>;
+				interrupts = <70>;
+			};
+
+			elm: elm@80000 {
+				compatible = "ti,814-elm";
+				ti,hwmods = "elm";
+				reg = <0x80000 0x2000>;
+				interrupts = <4>;
+			};
+
+			gpio1: gpio@32000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio1";
+				ti,gpio-always-on;
+				reg = <0x32000 0x2000>;
+				interrupts = <96>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@4c000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio2";
+				ti,gpio-always-on;
+				reg = <0x4c000 0x2000>;
+				interrupts = <98>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c2: i2c@2a000 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "i2c2";
+				reg = <0x2a000 0x1000>;
+				interrupts = <71>;
+			};
+
+			mcspi1: spi@30000 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x30000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <65>;
+				ti,spi-num-cs = <4>;
+				ti,hwmods = "mcspi1";
+				dmas = <&edma 16 &edma 17
+					&edma 18 &edma 19>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+			};
+
+			timer1: timer@2e000 {
+				compatible = "ti,dm814-timer";
+				reg = <0x2e000 0x2000>;
+				interrupts = <67>;
+				ti,hwmods = "timer1";
+				ti,timer-alwon;
+			};
+
+			uart1: uart@20000 {
+				compatible = "ti,omap3-uart";
+				ti,hwmods = "uart1";
+				reg = <0x20000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <72>;
+				dmas = <&edma 26 &edma 27>;
+				dma-names = "tx", "rx";
+			};
+
+			uart2: uart@22000 {
+				compatible = "ti,omap3-uart";
+				ti,hwmods = "uart2";
+				reg = <0x22000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <73>;
+				dmas = <&edma 28 &edma 29>;
+				dma-names = "tx", "rx";
+			};
+
+			uart3: uart@24000 {
+				compatible = "ti,omap3-uart";
+				ti,hwmods = "uart3";
+				reg = <0x24000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <74>;
+				dmas = <&edma 30 &edma 31>;
+				dma-names = "tx", "rx";
+			};
+
+			timer2: timer@40000 {
+				compatible = "ti,dm814-timer";
+				reg = <0x40000 0x2000>;
+				interrupts = <68>;
+				ti,hwmods = "timer2";
+			};
+
+			timer3: timer@42000 {
+				compatible = "ti,dm814-timer";
+				reg = <0x42000 0x2000>;
+				interrupts = <69>;
+				ti,hwmods = "timer3";
+			};
+
+			control: control@160000 {
+				compatible = "ti,dm814-scm", "simple-bus";
+				reg = <0x160000 0x16d000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x160000 0x16d000>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+
+					scm_clockdomains: clockdomains {
+					};
+				};
+
+				pincntl: pinmux@800 {
+					compatible = "pinctrl-single";
+					reg = <0x800 0xc38>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0x300ff>;
+				};
+			};
+
+			prcm: prcm@180000 {
+				compatible = "ti,dm814-prcm", "simple-bus";
+				reg = <0x180000 0x4000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+
+			pllss: pllss@1c5000 {
+				compatible = "ti,dm814-pllss", "simple-bus";
+				reg = <0x1c5000 0x2000>;
+
+				pllss_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				pllss_clockdomains: clockdomains {
+				};
+			};
+
+			wdt1: wdt@1c7000 {
+				compatible = "ti,omap3-wdt";
+				ti,hwmods = "wd_timer";
+				reg = <0x1c7000 0x1000>;
+				interrupts = <91>;
+			};
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,dm814-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x40>;
+			interrupts = <12 13 14>;
+			#dma-cells = <1>;
+		};
+
+		/* See TRM "Table 1-318. L4HS Instance Summary" */
+		l4hs: l4hs@4a000000 {
+			compatible = "ti,dm814-l4hs", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a000000 0x1b4040>;
+		};
+
+		/* REVISIT: Move to live under l4hs once driver is fixed */
+		mac: ethernet@4a100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "cpgmac0";
+			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+			clock-names = "fck", "cpts";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			reg = <0x4a100000 0x800
+			       0x4a100900 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			/*
+			 * c0_rx_thresh_pend
+			 * c0_rx_pend
+			 * c0_tx_pend
+			 * c0_misc_pend
+			 */
+			interrupts = <40 41 42 43>;
+			ranges;
+			syscon = <&scm_conf>;
+
+			davinci_mdio: mdio@4a100800 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x4a100800 0x100>;
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			phy_sel: cpsw-phy-sel@0x48160650 {
+				compatible = "ti,am3352-cpsw-phy-sel";
+				reg= <0x48160650 0x4>;
+				reg-names = "gmii-sel";
+			};
+		};
+	};
+};
+
+#include "dm814x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 289806adb343..3c99cfa1a876 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -58,7 +58,7 @@
 	 * the whole bus hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap3-l3-smx", "simple-bus";
+		compatible = "simple-bus";
 		reg = <0x44000000 0x10000>;
 		interrupts = <9 10>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 38b1f7e6004e..179121630ad7 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -419,293 +419,325 @@
 				status = "disabled";
 			};
 
-			thermal: thermal-diode@d001c {
-				compatible = "marvell,dove-thermal";
-				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
-			};
-
-			gate_clk: clock-gating-ctrl@d0038 {
-				compatible = "marvell,dove-gating-clock";
-				reg = <0xd0038 0x4>;
-				clocks = <&core_clk 0>;
-				#clock-cells = <1>;
-			};
-
-			pinctrl: pin-ctrl@d0200 {
-				compatible = "marvell,dove-pinctrl";
-				reg = <0xd0200 0x14>,
-				      <0xd0440 0x04>;
-				clocks = <&gate_clk 22>;
-
-				pmx_gpio_0: pmx-gpio-0 {
-					marvell,pins = "mpp0";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_1: pmx-gpio-1 {
-					marvell,pins = "mpp1";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_2: pmx-gpio-2 {
-					marvell,pins = "mpp2";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_3: pmx-gpio-3 {
-					marvell,pins = "mpp3";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_4: pmx-gpio-4 {
-					marvell,pins = "mpp4";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_5: pmx-gpio-5 {
-					marvell,pins = "mpp5";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_6: pmx-gpio-6 {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_7: pmx-gpio-7 {
-					marvell,pins = "mpp7";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_8: pmx-gpio-8 {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_9: pmx-gpio-9 {
-					marvell,pins = "mpp9";
-					marvell,function = "gpio";
-				};
-
-				pmx_pcie1_clkreq: pmx-pcie1-clkreq {
-					marvell,pins = "mpp9";
-					marvell,function = "pex1";
-				};
-
-				pmx_gpio_10: pmx-gpio-10 {
-					marvell,pins = "mpp10";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_11: pmx-gpio-11 {
-					marvell,pins = "mpp11";
-					marvell,function = "gpio";
-				};
-
-				pmx_pcie0_clkreq: pmx-pcie0-clkreq {
-					marvell,pins = "mpp11";
-					marvell,function = "pex0";
-				};
-
-				pmx_gpio_12: pmx-gpio-12 {
-					marvell,pins = "mpp12";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_13: pmx-gpio-13 {
-					marvell,pins = "mpp13";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_extclk: pmx-audio1-extclk {
-					marvell,pins = "mpp13";
-					marvell,function = "audio1";
-				};
-
-				pmx_gpio_14: pmx-gpio-14 {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_15: pmx-gpio-15 {
-					marvell,pins = "mpp15";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_16: pmx-gpio-16 {
-					marvell,pins = "mpp16";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_17: pmx-gpio-17 {
-					marvell,pins = "mpp17";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_18: pmx-gpio-18 {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_19: pmx-gpio-19 {
-					marvell,pins = "mpp19";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_20: pmx-gpio-20 {
-					marvell,pins = "mpp20";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_21: pmx-gpio-21 {
-					marvell,pins = "mpp21";
-					marvell,function = "gpio";
-				};
-
-				pmx_camera: pmx-camera {
-					marvell,pins = "mpp_camera";
-					marvell,function = "camera";
-				};
-
-				pmx_camera_gpio: pmx-camera-gpio {
-					marvell,pins = "mpp_camera";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio0: pmx-sdio0 {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "sdio0";
-				};
-
-				pmx_sdio0_gpio: pmx-sdio0-gpio {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio1: pmx-sdio1 {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "sdio1";
-				};
-
-				pmx_sdio1_gpio: pmx-sdio1-gpio {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_gpio: pmx-audio1-gpio {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "i2s1/spdifo";
-				};
-
-				pmx_spi0: pmx-spi0 {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "spi0";
-				};
-
-				pmx_spi0_gpio: pmx-spi0-gpio {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "gpio";
-				};
-
-				pmx_spi1_4_7: pmx-spi1-4-7 {
-					marvell,pins = "mpp4", "mpp5",
-						"mpp6", "mpp7";
-					marvell,function = "spi1";
-				};
-
-				pmx_spi1_20_23: pmx-spi1-20-23 {
-					marvell,pins = "mpp20", "mpp21",
-						"mpp22", "mpp23";
-					marvell,function = "spi1";
-				};
-
-				pmx_uart1: pmx-uart1 {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "uart1";
-				};
-
-				pmx_uart1_gpio: pmx-uart1-gpio {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "gpio";
-				};
-
-				pmx_nand: pmx-nand {
-					marvell,pins = "mpp_nand";
-					marvell,function = "nand";
-				};
-
-				pmx_nand_gpo: pmx-nand-gpo {
-					marvell,pins = "mpp_nand";
-					marvell,function = "gpo";
-				};
-
-				pmx_i2c1: pmx-i2c1 {
-					marvell,pins = "mpp17", "mpp19";
-					marvell,function = "twsi";
-				};
-
-				pmx_i2c2: pmx-i2c2 {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "twsi";
-				};
-
-				pmx_ssp_i2c2: pmx-ssp-i2c2 {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "ssp/twsi";
-				};
-
-				pmx_i2cmux_0: pmx-i2cmux-0 {
-					marvell,pins = "twsi";
-					marvell,function = "twsi-opt1";
-				};
-
-				pmx_i2cmux_1: pmx-i2cmux-1 {
-					marvell,pins = "twsi";
-					marvell,function = "twsi-opt2";
-				};
-
-				pmx_i2cmux_2: pmx-i2cmux-2 {
-					marvell,pins = "twsi";
-					marvell,function = "twsi-opt3";
-				};
-			};
-
-			core_clk: core-clocks@d0214 {
-				compatible = "marvell,dove-core-clock";
-				reg = <0xd0214 0x4>;
-				#clock-cells = <1>;
-			};
-
-			gpio0: gpio-ctrl@d0400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0400 0x20>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <12>, <13>, <14>, <60>;
-			};
-
-			gpio1: gpio-ctrl@d0420 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0420 0x20>;
-				ngpios = <32>;
+			pmu: power-management@d0000 {
+				compatible = "marvell,dove-pmu", "simple-bus";
+				reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+				ranges = <0x00000000 0x000d0000 0x8000
+					  0x00008000 0x000d8000 0x8000>;
+				interrupts = <33>;
 				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <61>;
-			};
-
-			rtc: real-time-clock@d8500 {
-				compatible = "marvell,orion-rtc";
-				reg = <0xd8500 0x20>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#interrupt-cells = <1>;
+				#reset-cells = <1>;
+
+				domains {
+					vpu_domain: vpu-domain {
+						#power-domain-cells = <0>;
+						marvell,pmu_pwr_mask = <0x00000008>;
+						marvell,pmu_iso_mask = <0x00000001>;
+						resets = <&pmu 16>;
+					};
+
+					gpu_domain: gpu-domain {
+						#power-domain-cells = <0>;
+						marvell,pmu_pwr_mask = <0x00000004>;
+						marvell,pmu_iso_mask = <0x00000002>;
+						resets = <&pmu 18>;
+					};
+				};
+
+				thermal: thermal-diode@001c {
+					compatible = "marvell,dove-thermal";
+					reg = <0x001c 0x0c>, <0x005c 0x08>;
+				};
+
+				gate_clk: clock-gating-ctrl@0038 {
+					compatible = "marvell,dove-gating-clock";
+					reg = <0x0038 0x4>;
+					clocks = <&core_clk 0>;
+					#clock-cells = <1>;
+				};
+
+				pinctrl: pin-ctrl@0200 {
+					compatible = "marvell,dove-pinctrl";
+					reg = <0x0200 0x14>,
+					      <0x0440 0x04>;
+					clocks = <&gate_clk 22>;
+
+					pmx_gpio_0: pmx-gpio-0 {
+						marvell,pins = "mpp0";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_1: pmx-gpio-1 {
+						marvell,pins = "mpp1";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_2: pmx-gpio-2 {
+						marvell,pins = "mpp2";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_3: pmx-gpio-3 {
+						marvell,pins = "mpp3";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_4: pmx-gpio-4 {
+						marvell,pins = "mpp4";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_5: pmx-gpio-5 {
+						marvell,pins = "mpp5";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_6: pmx-gpio-6 {
+						marvell,pins = "mpp6";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_7: pmx-gpio-7 {
+						marvell,pins = "mpp7";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_8: pmx-gpio-8 {
+						marvell,pins = "mpp8";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_9: pmx-gpio-9 {
+						marvell,pins = "mpp9";
+						marvell,function = "gpio";
+					};
+
+					pmx_pcie1_clkreq: pmx-pcie1-clkreq {
+						marvell,pins = "mpp9";
+						marvell,function = "pex1";
+					};
+
+					pmx_gpio_10: pmx-gpio-10 {
+						marvell,pins = "mpp10";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_11: pmx-gpio-11 {
+						marvell,pins = "mpp11";
+						marvell,function = "gpio";
+					};
+
+					pmx_pcie0_clkreq: pmx-pcie0-clkreq {
+						marvell,pins = "mpp11";
+						marvell,function = "pex0";
+					};
+
+					pmx_gpio_12: pmx-gpio-12 {
+						marvell,pins = "mpp12";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_13: pmx-gpio-13 {
+						marvell,pins = "mpp13";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_extclk: pmx-audio1-extclk {
+						marvell,pins = "mpp13";
+						marvell,function = "audio1";
+					};
+
+					pmx_gpio_14: pmx-gpio-14 {
+						marvell,pins = "mpp14";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_15: pmx-gpio-15 {
+						marvell,pins = "mpp15";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_16: pmx-gpio-16 {
+						marvell,pins = "mpp16";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_17: pmx-gpio-17 {
+						marvell,pins = "mpp17";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_18: pmx-gpio-18 {
+						marvell,pins = "mpp18";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_19: pmx-gpio-19 {
+						marvell,pins = "mpp19";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_20: pmx-gpio-20 {
+						marvell,pins = "mpp20";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_21: pmx-gpio-21 {
+						marvell,pins = "mpp21";
+						marvell,function = "gpio";
+					};
+
+					pmx_camera: pmx-camera {
+						marvell,pins = "mpp_camera";
+						marvell,function = "camera";
+					};
+
+					pmx_camera_gpio: pmx-camera-gpio {
+						marvell,pins = "mpp_camera";
+						marvell,function = "gpio";
+					};
+
+					pmx_sdio0: pmx-sdio0 {
+						marvell,pins = "mpp_sdio0";
+						marvell,function = "sdio0";
+					};
+
+					pmx_sdio0_gpio: pmx-sdio0-gpio {
+						marvell,pins = "mpp_sdio0";
+						marvell,function = "gpio";
+					};
+
+					pmx_sdio1: pmx-sdio1 {
+						marvell,pins = "mpp_sdio1";
+						marvell,function = "sdio1";
+					};
+
+					pmx_sdio1_gpio: pmx-sdio1-gpio {
+						marvell,pins = "mpp_sdio1";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_gpio: pmx-audio1-gpio {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "i2s1/spdifo";
+					};
+
+					pmx_spi0: pmx-spi0 {
+						marvell,pins = "mpp_spi0";
+						marvell,function = "spi0";
+					};
+
+					pmx_spi0_gpio: pmx-spi0-gpio {
+						marvell,pins = "mpp_spi0";
+						marvell,function = "gpio";
+					};
+
+					pmx_spi1_4_7: pmx-spi1-4-7 {
+						marvell,pins = "mpp4", "mpp5",
+							"mpp6", "mpp7";
+						marvell,function = "spi1";
+					};
+
+					pmx_spi1_20_23: pmx-spi1-20-23 {
+						marvell,pins = "mpp20", "mpp21",
+							"mpp22", "mpp23";
+						marvell,function = "spi1";
+					};
+
+					pmx_uart1: pmx-uart1 {
+						marvell,pins = "mpp_uart1";
+						marvell,function = "uart1";
+					};
+
+					pmx_uart1_gpio: pmx-uart1-gpio {
+						marvell,pins = "mpp_uart1";
+						marvell,function = "gpio";
+					};
+
+					pmx_nand: pmx-nand {
+						marvell,pins = "mpp_nand";
+						marvell,function = "nand";
+					};
+
+					pmx_nand_gpo: pmx-nand-gpo {
+						marvell,pins = "mpp_nand";
+						marvell,function = "gpo";
+					};
+
+					pmx_i2c1: pmx-i2c1 {
+						marvell,pins = "mpp17", "mpp19";
+						marvell,function = "twsi";
+					};
+
+					pmx_i2c2: pmx-i2c2 {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "twsi";
+					};
+
+					pmx_ssp_i2c2: pmx-ssp-i2c2 {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "ssp/twsi";
+					};
+
+					pmx_i2cmux_0: pmx-i2cmux-0 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt1";
+					};
+
+					pmx_i2cmux_1: pmx-i2cmux-1 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt2";
+					};
+
+					pmx_i2cmux_2: pmx-i2cmux-2 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt3";
+					};
+				};
+
+				core_clk: core-clocks@0214 {
+					compatible = "marvell,dove-core-clock";
+					reg = <0x0214 0x4>;
+					#clock-cells = <1>;
+				};
+
+				gpio0: gpio-ctrl@0400 {
+					compatible = "marvell,orion-gpio";
+					#gpio-cells = <2>;
+					gpio-controller;
+					reg = <0x0400 0x20>;
+					ngpios = <32>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupt-parent = <&intc>;
+					interrupts = <12>, <13>, <14>, <60>;
+				};
+
+				gpio1: gpio-ctrl@0420 {
+					compatible = "marvell,orion-gpio";
+					#gpio-cells = <2>;
+					gpio-controller;
+					reg = <0x0420 0x20>;
+					ngpios = <32>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupt-parent = <&intc>;
+					interrupts = <61>;
+				};
+
+				rtc: real-time-clock@8500 {
+					compatible = "marvell,orion-rtc";
+					reg = <0x8500 0x20>;
+					interrupts = <5>;
+				};
 			};
 
 			gconf: global-config@e802c {
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 096f68be99e2..a6c82e5b64fe 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -19,6 +19,15 @@
 		reg = <0x80000000 0x60000000>; /* 1536 MB */
 	};
 
+	evm_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+	};
+
 	mmc2_3v3: fixedregulator-mmc2 {
 		compatible = "regulator-fixed";
 		regulator-name = "mmc2_3v3";
@@ -349,6 +358,7 @@
 					regulator-name = "ldo1";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
 					regulator-boot-on;
 				};
 
@@ -462,8 +472,14 @@
 
 &mmc1 {
 	status = "okay";
-	vmmc-supply = <&ldo1_reg>;
+	vmmc-supply = <&evm_3v3_sd>;
+	vmmc_aux-supply = <&ldo1_reg>;
 	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is always hardwired.
+	 */
+	cd-gpios = <&gpio6 27 0>;
 };
 
 &mmc2 {
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index b058b3146874..a0d3d4bfe9cb 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -141,7 +141,7 @@
 				dra7_pmx_core: pinmux@1400 {
 					compatible = "ti,dra7-padconf",
 						     "pinctrl-single";
-					reg = <0x1400 0x0464>;
+					reg = <0x1400 0x0468>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#interrupt-cells = <1>;
@@ -149,6 +149,11 @@
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x3fffffff>;
 				};
+
+				scm_conf1: scm_conf@1c04 {
+					compatible = "syscon";
+					reg = <0x1c04 0x0020>;
+				};
 			};
 
 			cm_core_aon: cm_core_aon@5000 {
@@ -286,16 +291,6 @@
 				#thermal-sensor-cells = <1>;
 		};
 
-		dra7_ctrl_core: ctrl_core@4a002000 {
-			compatible = "syscon";
-			reg = <0x4a002000 0x6d0>;
-		};
-
-		dra7_ctrl_general: tisyscon@4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
-		};
-
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -308,6 +303,15 @@
 			dma-requests = <127>;
 		};
 
+		sdma_xbar: dma-router@4a002b78 {
+			compatible = "ti,dra7-dma-crossbar";
+			reg = <0x4a002b78 0xfc>;
+			#dma-cells = <1>;
+			dma-requests = <205>;
+			ti,dma-safe-map = <0>;
+			dma-masters = <&sdma>;
+		};
+
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4ae10000 0x200>;
@@ -403,7 +407,7 @@
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 49>, <&sdma 50>;
+			dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
 			dma-names = "tx", "rx";
 		};
 
@@ -414,7 +418,7 @@
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 51>, <&sdma 52>;
+			dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
 			dma-names = "tx", "rx";
 		};
 
@@ -425,7 +429,7 @@
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 53>, <&sdma 54>;
+			dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
 			dma-names = "tx", "rx";
 		};
 
@@ -436,7 +440,7 @@
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
                         status = "disabled";
-			dmas = <&sdma 55>, <&sdma 56>;
+			dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
 			dma-names = "tx", "rx";
 		};
 
@@ -447,7 +451,7 @@
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 63>, <&sdma 64>;
+			dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
 			dma-names = "tx", "rx";
 		};
 
@@ -458,7 +462,7 @@
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 79>, <&sdma 80>;
+			dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
 			dma-names = "tx", "rx";
 		};
 
@@ -867,7 +871,7 @@
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
+			dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 			pbias-supply = <&pbias_mmc_reg>;
@@ -879,7 +883,7 @@
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
+			dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -890,7 +894,7 @@
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
+			dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -901,7 +905,7 @@
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
+			dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -1046,14 +1050,14 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
 			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
+			dmas = <&sdma_xbar 35>,
+			       <&sdma_xbar 36>,
+			       <&sdma_xbar 37>,
+			       <&sdma_xbar 38>,
+			       <&sdma_xbar 39>,
+			       <&sdma_xbar 40>,
+			       <&sdma_xbar 41>,
+			       <&sdma_xbar 42>;
 			dma-names = "tx0", "rx0", "tx1", "rx1",
 				    "tx2", "rx2", "tx3", "rx3";
 			status = "disabled";
@@ -1067,10 +1071,10 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
 			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
+			dmas = <&sdma_xbar 43>,
+			       <&sdma_xbar 44>,
+			       <&sdma_xbar 45>,
+			       <&sdma_xbar 46>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -1083,7 +1087,7 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
 			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
+			dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
@@ -1096,7 +1100,7 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
 			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
+			dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
@@ -1296,7 +1300,12 @@
 			usb1: usb@48890000 {
 				compatible = "snps,dwc3";
 				reg = <0x48890000 0x17000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				tx-fifo-resize;
@@ -1319,7 +1328,12 @@
 			usb2: usb@488d0000 {
 				compatible = "snps,dwc3";
 				reg = <0x488d0000 0x17000>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy2>;
 				phy-names = "usb2-phy";
 				tx-fifo-resize;
@@ -1344,7 +1358,12 @@
 			usb3: usb@48910000 {
 				compatible = "snps,dwc3";
 				reg = <0x48910000 0x17000>;
-				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 803738414086..6f6bd98c98df 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -30,6 +30,15 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	evm_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+	};
+
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
@@ -286,6 +295,7 @@
 					regulator-name = "ldo1";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
 					regulator-boot-on;
 				};
 
@@ -343,6 +353,12 @@
 		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+
+		cpsw_sel_s0 {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
 	};
 };
 
@@ -491,14 +507,15 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_default>;
-
-	vmmc-supply = <&ldo1_reg>;
+	vmmc-supply = <&evm_3v3_sd>;
+	vmmc_aux-supply = <&ldo1_reg>;
 	bus-width = <4>;
 	/*
 	 * SDCD signal is not being used here - using the fact that GPIO mode
 	 * is a viable alternative
 	 */
 	cd-gpios = <&gpio6 27 0>;
+	max-frequency = <192000000>;
 };
 
 &mmc2 {
@@ -510,6 +527,7 @@
 	vmmc-supply = <&evm_3v3>;
 	bus-width = <8>;
 	ti,non-removable;
+	max-frequency = <192000000>;
 };
 
 &dra7_pmx_core {
@@ -571,9 +589,10 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
+	slaves = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <3>;
 	phy-mode = "rgmii";
 };
@@ -582,7 +601,6 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	active_slave = <1>;
 };
 
 &dcan1 {
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index fa995d0ca1f2..feea98e0a4b5 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -65,7 +65,12 @@
 			usb4: usb@48950000 {
 				compatible = "snps,dwc3";
 				reg = <0x48950000 0x17000>;
-				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 1dee0aa4f40c..955c24ee4a8c 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -95,6 +95,14 @@
 	};
 };
 
+&iic0 {
+	status = "okay";
+};
+
+&iic1 {
+	status = "okay";
+};
+
 &pfc {
 	uart1_pins: serial@e1030000 {
 		renesas,groups = "uart1_ctrl", "uart1_data";
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index bb45694d91bc..edad0c4eea35 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -21,6 +21,8 @@
 		gpio2 = &gpio2;
 		gpio3 = &gpio3;
 		gpio4 = &gpio4;
+		i2c0 = &iic0;
+		i2c1 = &iic1;
 	};
 
 	cpus {
@@ -66,6 +68,30 @@
 			clock-frequency = <32768>;
 			#clock-cells = <0>;
 		};
+		iic0_sclkdiv: iic0_sclkdiv {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x624 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		iic0_sclk: iic0_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x48c 1>;
+			clocks = <&iic0_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		iic1_sclkdiv: iic1_sclkdiv {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x624 16>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		iic1_sclk: iic1_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x490 1>;
+			clocks = <&iic1_sclkdiv>;
+			#clock-cells = <0>;
+		};
 		pll3_fo: pll3_fo {
 			compatible = "fixed-factor-clock";
 			clocks = <&c32ki>;
@@ -234,4 +260,26 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	iic0: i2c@e0070000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-emev2";
+		reg = <0xe0070000 0x28>;
+		interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&iic0_sclk>;
+		clock-names = "sclk";
+		status = "disabled";
+	};
+
+	iic1: i2c@e10a0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-emev2";
+		reg = <0xe10a0000 0x28>;
+		interrupts = <0 33 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&iic1_sclk>;
+		clock-names = "sclk";
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 775892b2cc6a..eb379526e234 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -69,66 +69,6 @@
 		enable-active-high;
 	};
 
-	hsotg@12480000 {
-		vusb_d-supply = <&ldo3_reg>;
-		vusb_a-supply = <&ldo8_reg>;
-		dr_mode = "peripheral";
-		status = "okay";
-	};
-
-	sdhci_emmc: sdhci@12510000 {
-		bus-width = <8>;
-		non-removable;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&vemmc_reg>;
-		status = "okay";
-	};
-
-	sdhci_sd: sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo5_reg>;
-		cd-gpios = <&gpx3 4 0>;
-		cd-inverted;
-		status = "okay";
-	};
-
-	ehci@12580000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	ohci@12590000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -186,218 +126,6 @@
 		enable-active-high;
 	};
 
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		tsp@4a {
-			/* TBD: Atmel maXtouch touchscreen */
-			reg = <0x4a>;
-		};
-	};
-
-	i2c@138B0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c5_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		vdd_arm_reg: pmic@60 {
-			compatible = "maxim,max8952";
-			reg = <0x60>;
-
-			max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
-			max8952,default-mode = <0>;
-			max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-							<1050000>, <950000>;
-			max8952,sync-freq = <0>;
-			max8952,ramp-speed = <0>;
-
-			regulator-name = "vdd_arm";
-			regulator-min-microvolt = <770000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pmic@66 {
-			compatible = "national,lp3974";
-			reg = <0x66>;
-
-			max8998,pmic-buck1-default-dvs-idx = <0>;
-			max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
-							<&gpx0 6 0>;
-			max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
-							<1100000>, <1000000>;
-
-			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
-			max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
-
-			regulators {
-				ldo2_reg: LDO2 {
-					regulator-name = "VALIVE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VUSB+MIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "LDO6";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VLCD+VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VUSB+VDAC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VCC_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "CAM_AF_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "PS_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VHIC_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "CAM_I_HOST_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "CAM_S_ANA_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VCC_3.0V_LCD";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "VINT_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VG3D_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VCC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "VMEM_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ap32khz_reg: EN32KHz-AP {
-					regulator-name = "32KHz AP";
-					regulator-always-on;
-				};
-
-				cp32khz_reg: EN32KHz-CP {
-					regulator-name = "32KHz CP";
-				};
-
-				vichg_reg: ENVICHG {
-					regulator-name = "VICHG";
-				};
-
-				safeout1_reg: ESAFEOUT1 {
-					regulator-name = "SAFEOUT1";
-					regulator-always-on;
-				};
-
-				safeout2_reg: ESAFEOUT2 {
-					regulator-name = "SAFEOUT2";
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
 	spi-lcd {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
@@ -446,27 +174,6 @@
 		};
 	};
 
-	fimd: fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
-		pinctrl-names = "default";
-		status = "okay";
-		samsung,invert-vden;
-		samsung,invert-vclk;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@3 {
-			reg = <3>;
-			fimd_dpi_ep: endpoint {
-				remote-endpoint = <&lcd_ep>;
-			};
-		};
-	};
-
-	pwm@139D0000 {
-		compatible = "samsung,s5p6440-pwm";
-		status = "okay";
-	};
-
 	camera {
 		status = "okay";
 
@@ -526,30 +233,287 @@
 		pinctrl-names = "default";
 		status = "okay";
 	};
+};
 
-	mixer@12C10000 {
+&cpu0 {
+	cpu0-supply = <&vdd_arm_reg>;
+};
+
+&ehci {
+	status = "okay";
+	port@0 {
 		status = "okay";
 	};
+};
 
-	hdmi@12D00000 {
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd>;
-		hdmi-en-supply = <&hdmi_en>;
-		vdd-supply = <&ldo3_reg>;
-		vdd_osc-supply = <&ldo4_reg>;
-		vdd_pll-supply = <&ldo3_reg>;
-		ddc = <&hdmi_ddc>;
-		status = "okay";
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+	samsung,invert-vden;
+	samsung,invert-vclk;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	port@3 {
+		reg = <3>;
+		fimd_dpi_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
 	};
+};
 
-	i2c@138E0000 {
-		status = "okay";
+&hdmi {
+	hpd-gpio = <&gpx3 7 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
+	hdmi-en-supply = <&hdmi_en>;
+	vdd-supply = <&ldo3_reg>;
+	vdd_osc-supply = <&ldo4_reg>;
+	vdd_pll-supply = <&ldo3_reg>;
+	ddc = <&hdmi_ddc>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo3_reg>;
+	vusb_a-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	tsp@4a {
+		/* TBD: Atmel maXtouch touchscreen */
+		reg = <0x4a>;
 	};
 };
 
-&cpu0 {
-	cpu0-supply = <&vdd_arm_reg>;
+&i2c_5 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	vdd_arm_reg: pmic@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+
+		max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+		max8952,default-mode = <0>;
+		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+						<1050000>, <950000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <770000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pmic@66 {
+		compatible = "national,lp3974";
+		reg = <0x66>;
+
+		max8998,pmic-buck1-default-dvs-idx = <0>;
+		max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
+						<&gpx0 6 0>;
+		max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
+						<1100000>, <1000000>;
+
+		max8998,pmic-buck2-default-dvs-idx = <0>;
+		max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
+		max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
+
+		regulators {
+			ldo2_reg: LDO2 {
+				regulator-name = "VALIVE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VUSB+MIPI_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VADC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VLCD+VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VCC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "CAM_AF_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "PS_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VHIC_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "CAM_I_HOST_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "CAM_S_ANA_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VCC_3.0V_LCD";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VINT_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VG3D_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VCC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VMEM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ap32khz_reg: EN32KHz-AP {
+				regulator-name = "32KHz AP";
+				regulator-always-on;
+			};
+
+			cp32khz_reg: EN32KHz-CP {
+				regulator-name = "32KHz CP";
+			};
+
+			vichg_reg: ENVICHG {
+				regulator-name = "VICHG";
+			};
+
+			safeout1_reg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+				regulator-always-on;
+			};
+
+			safeout2_reg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+};
+
+&mdma1 {
+	reg = <0x12840000 0x1000>;
+};
+
+&mixer {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+	port@0 {
+		status = "okay";
+	};
 };
 
 &pinctrl_1 {
@@ -568,6 +532,42 @@
 	};
 };
 
-&mdma1 {
-	reg = <0x12840000 0x1000>;
+&pwm {
+	compatible = "samsung,s5p6440-pwm";
+	status = "okay";
+};
+
+&sdhci_0 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vemmc_reg>;
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo5_reg>;
+	cd-gpios = <&gpx3 4 0>;
+	cd-inverted;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index afc199d78cb9..884840059018 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -190,6 +190,9 @@
 			interrupt-parent = <&gpx2>;
 			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 			reg = <0x36>;
+
+			maxim,over-heat-temp = <700>;
+			maxim,over-volt = <4500>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 886cfca044ac..880917e508b2 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -12,807 +12,805 @@
  * published by the Free Software Foundation.
 */
 
-/ {
-	pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa2: gpa2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb0: gpb0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb1: gpb1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb2: gpb2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb3: gpb3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc2: gpc2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc3: gpc3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpc4: gpc4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-				     <26 0>, <26 1>, <27 0>, <27 1>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-				     <30 0>, <30 1>, <31 0>, <31 1>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_hs_bus: i2c2-hs-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_hs_bus: i2c3-hs-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpa2-0", "gpa2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpa2-2", "gpa2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpb1-0", "gpb1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpb1-3", "gpb1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpb2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpb2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpb2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpb2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpb2-2", "gpb2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_hs_bus: i2c0-hs-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_hs_bus: i2c1-hs-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpc0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpc0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpc0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpc0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpc2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpc2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpc2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpc2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpc3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpc3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpc3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpc3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpc4-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpc4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpc4-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpc4-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		dp_hpd: dp_hpd {
-			samsung,pins = "gpx0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13400000 {
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg0: gpg0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg1: gpg1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg2: gpg2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph0: gph0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph1: gph1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		cam_gpio_a: cam-gpio-a {
-			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				       "gpe1-0", "gpe1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_gpio_b: cam-gpio-b {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c2_bus: cam-i2c2-bus {
-			samsung,pins = "gpe0-6", "gpe1-0";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi1_bus: cam-spi1-bus {
-			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c1_bus: cam-i2c1-bus {
-			samsung,pins = "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c0_bus: cam-i2c0-bus {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi0_bus: cam-spi0-bus {
-			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_bayrgb_bus: cam-bayrgb-bus {
-			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-				       "gpg2-0", "gpg2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a: cam-port-a {
-			samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
-				       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
-				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@10d10000 {
-		gpv0: gpv0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv1: gpv1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv2: gpv2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv3: gpv3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv4: gpv4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		c2c_rxd: c2c-rxd {
-			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-				       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-				       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		c2c_txd: c2c-txd {
-			samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-				       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-				       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpc4: gpc4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+			     <26 0>, <26 1>, <27 0>, <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+			     <30 0>, <30 1>, <31 0>, <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_hs_bus: i2c2-hs-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_hs_bus: i2c3-hs-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ac97_bus: ac97-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpb1-0", "gpb1-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_hs_bus: i2c0-hs-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_hs_bus: i2c1-hs-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus8: sd2-bus-width8 {
+		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_clk: sd3-clk {
+		samsung,pins = "gpc4-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_cmd: sd3-cmd {
+		samsung,pins = "gpc4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_cd: sd3-cd {
+		samsung,pins = "gpc4-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_bus1: sd3-bus-width1 {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_bus4: sd3-bus-width4 {
+		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd: dp_hpd {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	cam_gpio_a: cam-gpio-a {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			       "gpe1-0", "gpe1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_b: cam-gpio-b {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c2_bus: cam-i2c2-bus {
+		samsung,pins = "gpe0-6", "gpe1-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus {
+		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_bayrgb_bus: cam-bayrgb-bus {
+		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+			       "gpg2-0", "gpg2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_a: cam-port-a {
+		samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
+			       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
+			       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_2 {
+	gpv0: gpv0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	c2c_rxd: c2c-rxd {
+		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+			       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+			       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+			       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	c2c_txd: c2c-txd {
+		samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+			       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+			       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+			       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_3 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index bf9bee67c416..4a1f88300a28 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -19,7 +19,6 @@
 
 #include <dt-bindings/clock/exynos5250.h>
 #include "exynos5.dtsi"
-#include "exynos5250-pinctrl.dtsi"
 #include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
@@ -1062,3 +1061,5 @@
 	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 	clock-names = "uart", "clk_uart_baud0";
 };
+
+#include "exynos5250-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index be3e02530b42..cebeaab3abec 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -62,13 +62,13 @@
 };
 
 &uart0 {
-		status = "okay";
+	status = "okay";
 };
 
 &uart1 {
-		status = "okay";
+	status = "okay";
 };
 
 &uart2 {
-		status = "okay";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 8b153166ebdb..130563b2ca95 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -12,711 +12,710 @@
  * published by the Free Software Foundation.
 */
 
-/ {
-	pinctrl@13400000 {
-		gpy7: gpy7 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-				     <26 0>, <26 1>, <27 0>, <27 1>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-				     <30 0>, <30 1>, <31 0>, <31 1>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		dp_hpd: dp_hpd {
-			samsung,pins = "gpx0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13410000 {
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc2: gpc2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc3: gpc3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc4: gpc4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpc0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpc0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpc0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpc0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpc1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_rclk: sd0-rclk {
-			samsung,pins = "gpc0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpc1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpc1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_int: sd1-int {
-			samsung,pins = "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpc1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus8: sd1-bus-width8 {
-			samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpc2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpc2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpc2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpc2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-	};
-
-	pinctrl@14000000 {
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg0: gpg0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg1: gpg1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg2: gpg2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj4: gpj4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		cam_gpio_a: cam-gpio-a {
-			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				       "gpe1-0", "gpe1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_gpio_b: cam-gpio-b {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c2_bus: cam-i2c2-bus {
-			samsung,pins = "gpf0-4", "gpf0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-		cam_spi1_bus: cam-spi1-bus {
-			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c1_bus: cam-i2c1-bus {
-			samsung,pins = "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c0_bus: cam-i2c0-bus {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi0_bus: cam-spi0-bus {
-			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_bayrgb_bus: cam-bayrgb-bus {
-			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-				       "gpg2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@14010000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa2: gpa2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb0: gpb0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb1: gpb1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb2: gpb2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb3: gpb3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb4: gpb4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph0: gph0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_hs_bus: i2c4-hs-bus {
-			samsung,pins = "gpa2-0", "gpa2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_hs_bus: i2c5-hs-bus {
-			samsung,pins = "gpa2-2", "gpa2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpb1-0", "gpb1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_hs_bus: i2c6-hs-bus {
-			samsung,pins = "gpb1-3", "gpb1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpb2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpb2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpb2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpb2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_hs_bus: i2c7-hs-bus {
-			samsung,pins = "gpb2-2", "gpb2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c8_hs_bus: i2c8-hs-bus {
-			samsung,pins = "gpb3-4", "gpb3-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c9_hs_bus: i2c9-hs-bus {
-			samsung,pins = "gpb3-6", "gpb3-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c10_hs_bus: i2c10-hs-bus {
-			samsung,pins = "gpb4-0", "gpb4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
+&pinctrl_0 {
+	gpy7: gpy7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+			     <26 0>, <26 1>, <27 0>, <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+			     <30 0>, <30 1>, <31 0>, <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	dp_hpd: dp_hpd {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rclk: sd0-rclk {
+		samsung,pins = "gpc0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpc1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpc1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_int: sd1-int {
+		samsung,pins = "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpc1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+};
+
+&pinctrl_2 {
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	cam_gpio_a: cam-gpio-a {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			       "gpe1-0", "gpe1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_b: cam-gpio-b {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c2_bus: cam-i2c2-bus {
+		samsung,pins = "gpf0-4", "gpf0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus {
+		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_bayrgb_bus: cam-bayrgb-bus {
+		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+			       "gpg2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_3 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_hs_bus: i2c4-hs-bus {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_hs_bus: i2c5-hs-bus {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpb1-0", "gpb1-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_hs_bus: i2c6-hs-bus {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_hs_bus: i2c7-hs-bus {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c8_hs_bus: i2c8-hs-bus {
+		samsung,pins = "gpb3-4", "gpb3-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c9_hs_bus: i2c9-hs-bus {
+		samsung,pins = "gpb3-6", "gpb3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c10_hs_bus: i2c10-hs-bus {
+		samsung,pins = "gpb4-0", "gpb4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_4 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 534f27ceb10b..df9aee92ecf4 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -15,7 +15,6 @@
 
 #include <dt-bindings/clock/exynos5420.h>
 #include "exynos5.dtsi"
-#include "exynos5420-pinctrl.dtsi"
 
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
@@ -1166,3 +1165,5 @@
 	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 	clock-names = "uart", "clk_uart_baud0";
 };
+
+#include "exynos5420-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
new file mode 100644
index 000000000000..2b289d7c0d13
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
@@ -0,0 +1,59 @@
+/*
+ * Device tree sources for Exynos5422 thermal zone
+ *
+ * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
+ *			Anand Moon <linux.amoon@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0 0>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			trips {
+				cpu_alert0: cpu-alert-0 {
+					temperature = <50000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_alert1: cpu-alert-1 {
+					temperature = <60000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_alert2: cpu-alert-2 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_crit0: cpu-crit-0 {
+					temperature = <120000>; /* millicelsius */
+					hysteresis = <0>; /* millicelsius */
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+				     trip = <&cpu_alert0>;
+				     cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+				     trip = <&cpu_alert1>;
+				     cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+				     trip = <&cpu_alert2>;
+				     cooling-device = <&fan0 2 3>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 8adf455744e9..1565667e6f69 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5800.dtsi"
+#include "exynos5422-cpu-thermal.dtsi"
 
 / {
 	memory {
@@ -107,6 +108,15 @@
 			clocks = <&i2s0 CLK_I2S_CDCLK>;
 		};
 	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 20972 0>;
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 130 170 230>;
+	};
 };
 
 &clock_audss {
@@ -461,6 +471,32 @@
 	 */
 	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
 	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+	status = "okay";
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo7_reg>;
+	status = "okay";
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo7_reg>;
+	status = "okay";
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo7_reg>;
+	status = "okay";
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo7_reg>;
+	status = "okay";
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo7_reg>;
 	status = "okay";
 };
 
@@ -477,3 +513,13 @@
 &usbdrd_dwc3_1 {
 	dr_mode = "otg";
 };
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index b69be5c499cf..feb9d34b239c 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -144,6 +144,15 @@
 				clock-names = "ipg", "per";
 			};
 
+			rtc: rtc@10007000 {
+				compatible = "fsl,imx21-rtc";
+				reg = <0x10007000 0x1000>;
+				interrupts = <22>;
+				clocks = <&clks IMX27_CLK_CKIL>,
+					 <&clks IMX27_CLK_RTC_IPG_GATE>;
+				clock-names = "ref", "ipg";
+			};
+
 			kpp: kpp@10008000 {
 				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
 				reg = <0x10008000 0x1000>;
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index b0d5542ac829..53fd75c8ffcf 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -228,10 +228,11 @@
 			>;
 		};
 
+		/* open drain */
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
index 82d623d05915..66e47de5e826 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -20,15 +20,7 @@
 };
 
 &iomuxc {
-	i2c1 {
-		/* open drain */
-		pinctrl_i2c1_qsrb: i2c1grp-1 {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA      0x400001ec
-				MX53_PAD_CSI0_DAT9__I2C1_SCL      0x400001ec
-			>;
-		};
-
+	imx53-qsrb {
 		pinctrl_pmic: pmicgrp {
 			fsl,pins = <
 				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1e4 /* IRQ */
@@ -38,10 +30,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_qsrb>;
-	status = "okay";
-
 	pmic: mc34708@8 {
 		compatible = "fsl,mc34708";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index f2867c4b34a8..7b31fdb79ced 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -248,7 +248,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 4493f6e99330..1b66328a8498 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -316,10 +316,13 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
 	status = "okay";
 };
 
@@ -380,7 +383,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -469,7 +471,34 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x1b0b0 /* CD */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index a857d1294609..7c51839ff934 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -322,10 +322,13 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
 	status = "okay";
 };
 
@@ -385,7 +388,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -476,7 +478,34 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* CD */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 1afe3385e2d2..929e0b37bd9e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -415,10 +415,13 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
 	status = "okay";
 };
 
@@ -478,7 +481,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -568,6 +570,34 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index d1866a0a2f13..741f3d529e3e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -250,7 +250,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 5c6587f6c420..d1e5048b00b5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -202,7 +202,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index d7fe6672d00c..340bc8e42650 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -54,6 +54,17 @@
 			gpio = <&gpio3 22 0>;
 			enable-active-high;
 		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
 	};
 
 	gpio-keys {
@@ -149,6 +160,20 @@
 	status = "okay";
 };
 
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
@@ -245,6 +270,20 @@
 			>;
 		};
 
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
 		pinctrl_ecspi1: ecspi1grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e329ca5c3322..c37bb9ff9fac 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -28,6 +28,71 @@
 		};
 	};
 
+	clocks {
+		codec_osc: anaclk2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_audio: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "cs42888_supply";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			"fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif",
 			   "fsl,imx-sabreauto-spdif";
@@ -45,6 +110,19 @@
 	};
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+			  <&clks IMX6QDL_PLL4_BYPASS>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>,
+			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	assigned-clock-rates = <0>, <0>, <24576000>;
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
@@ -61,6 +139,16 @@
 	};
 };
 
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -76,6 +164,10 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -180,6 +272,18 @@
 			};
 		};
 	};
+
+	codec: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&codec_osc>;
+		clock-names = "mclk";
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+        };
+
 };
 
 &i2c3 {
@@ -257,6 +361,21 @@
 			>;
 		};
 
+		pinctrl_esai: esaigrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+			>;
+		};
+
 		pinctrl_gpio_leds: gpioledsgrp {
 			fsl,pins = <
 				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
@@ -318,6 +437,12 @@
 			>;
 		};
 
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			>;
+		};
+
 		pinctrl_usdhc3: usdhc3grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
@@ -462,6 +587,18 @@
 	status = "okay";
 };
 
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 782379320517..ce4c7313f509 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -53,6 +53,17 @@
 			gpio = <&gpio3 22 0>;
 			enable-active-high;
 		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
 	};
 
 	gpio-keys {
@@ -148,6 +159,20 @@
 	status = "okay";
 };
 
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
@@ -239,6 +264,20 @@
 			>;
 		};
 
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
 		pinctrl_ecspi1: ecspi1grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 944eb81cb2b8..2c07d3a86b61 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -141,6 +141,13 @@
 	status = "okay";
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 9 0>;
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 10d0b26c93f1..e716e6f301c6 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -300,8 +300,19 @@
 				};
 
 				esai: esai@02024000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx35-esai";
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
+						 <&clks IMX6QDL_CLK_ESAI_MEM>,
+						 <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+						 <&clks IMX6QDL_CLK_ESAI_IPG>,
+						 <&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "core", "mem", "extal", "fsys", "dma";
+					dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
 				};
 
 				ssi1: ssi@02028000 {
@@ -353,8 +364,28 @@
 				};
 
 				asrc: asrc@02034000 {
+					compatible = "fsl,imx53-asrc";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+						<&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+						<&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "dma";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+					dma-names = "rxa", "rxb", "rxc",
+							"txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
+					status = "okay";
 				};
 
 				spba@0203c000 {
@@ -687,22 +718,23 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
+					regmap = <&snvs>;
+					offset = <0x34>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
index 0da906bd8df2..10c69963100f 100644
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -61,7 +61,9 @@
 	usdhc3_pwrseq: usdhc3_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
+			      <&gpio4 7 GPIO_ACTIVE_LOW>, 	/* WL_HOSTWAKE */
 			      <&gpio3 25 GPIO_ACTIVE_LOW>, 	/* BT_REG_ON */
+			      <&gpio3 27 GPIO_ACTIVE_LOW>,	/* BT_HOSTWAKE */
 			      <&gpio4 4 GPIO_ACTIVE_LOW>, 	/* BT_WAKE */
 			      <&gpio4 6 GPIO_ACTIVE_LOW>; 	/* BT_RST_N */
 	};
@@ -73,16 +75,16 @@
 	status = "okay";
 };
 
-&uart2 {
+&uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };
 
-&uart3 {
+&uart5 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,uart-has-rtscts;
 	status = "okay";
 };
 
@@ -130,14 +132,6 @@
 			>;
 		};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6SL_PAD_EPDC_D12__UART2_RX_DATA	0x41b0b1
-				MX6SL_PAD_EPDC_D13__UART2_TX_DATA	0x41b0b1
-				MX6SL_PAD_EPDC_D14__UART2_RTS_B		0x4130B1
-				MX6SL_PAD_EPDC_D15__UART2_CTS_B		0x4130B1
-			>;
-		};
 
 		pinctrl_uart3: uart3grp {
 			fsl,pins = <
@@ -146,6 +140,15 @@
 			>;
 		};
 
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA	0x41b0b1
+				MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA	0x41b0b1
+				MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B	0x4130b1
+				MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B	0x4130b1
+			>;
+		};
+
 		pinctrl_usdhc2: usdhc2grp {
 			fsl,pins = <
 				MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
@@ -158,6 +161,7 @@
 				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
 				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
 				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x417059
 			>;
 		};
 
@@ -173,6 +177,7 @@
 				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
 				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
 				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170b9
 			>;
 		};
 
@@ -188,6 +193,7 @@
 				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
 				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
 				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170f9
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index a78e715e3982..320a27f8889e 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -563,22 +563,23 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
+					regmap = <&snvs>;
+					offset = <0x34>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index e6223d8e79af..c94f2ea2316e 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/clock/imx6sx-clock.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "imx6sx-pinfunc.h"
 #include "skeleton.dtsi"
@@ -662,22 +663,31 @@
 			};
 
 			snvs: snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
+					regmap = <&snvs>;
+					offset = <0x34>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
 			};
 
 			epit1: epit@020d0000 {
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
new file mode 100644
index 000000000000..25746b122ea6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -0,0 +1,343 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
+	compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_sd1_vmmc: sd1_regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "VSD_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&cpu0 {
+	arm-supply = <&reg_arm>;
+	soc-supply = <&reg_soc>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			reg = <2>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		reg = <0>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+			/* used for lcd reset */
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK	0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00	0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01	0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02	0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03	0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B	0x70a1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_sim2: sim2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0xb808
+			MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x31
+			MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0xb808
+			MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0xb808
+			MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0xb809
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x3008
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     	0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     	0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059 /* SD1 CD */
+			MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT    0x17059 /* SD1 VSELECT */
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/imx6ul-pinfunc.h
new file mode 100644
index 000000000000..20c7da1affce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pinfunc.h
@@ -0,0 +1,938 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6UL_PINFUNC_H
+#define __DTS_IMX6UL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10				0x0014 0x02a0 0x0000 5 0
+#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11				0x0018 0x02a4 0x0000 5 0
+
+#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00				0x001c 0x02a8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01				0x0020 0x02ac 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02				0x0024 0x02b0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03				0x0028 0x02b4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04				0x002c 0x02b8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05				0x0030 0x02bc 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06				0x0034 0x02c0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07				0x0038 0x02c4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08				0x003c 0x02c8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09				0x0040 0x02cc 0x0000 5 0
+
+#define MX6UL_PAD_JTAG_MOD__SJC_MOD                              	0x0044 0x02d0 0x0000 0 0
+#define MX6UL_PAD_JTAG_MOD__GPT2_CLK                             	0x0044 0x02d0 0x05a0 1 0
+#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT                            	0x0044 0x02d0 0x0000 2 0
+#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M                    	0x0044 0x02d0 0x0000 3 0
+#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY                         	0x0044 0x02d0 0x04c0 4 0
+#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10                           	0x0044 0x02d0 0x0000 5 0
+#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00                     	0x0044 0x02d0 0x0000 6 0
+#define MX6UL_PAD_JTAG_TMS__SJC_TMS                              	0x0048 0x02d4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1                        	0x0048 0x02d4 0x0598 1 0
+#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK                            	0x0048 0x02d4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1                            	0x0048 0x02d4 0x0000 3 0
+#define MX6UL_PAD_JTAG_TMS__CCM_WAIT                             	0x0048 0x02d4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11                           	0x0048 0x02d4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01                     	0x0048 0x02d4 0x0000 6 0
+#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT                            	0x0048 0x02d4 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDO__SJC_TDO                              	0x004c 0x02d8 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2                        	0x004c 0x02d8 0x059c 1 0
+#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC                         	0x004c 0x02d8 0x05fc 2 0
+#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2                            	0x004c 0x02d8 0x0000 3 0
+#define MX6UL_PAD_JTAG_TDO__CCM_STOP                             	0x004c 0x02d8 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12                           	0x004c 0x02d8 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT                            	0x004c 0x02d8 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT                            	0x004c 0x02d8 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDI__SJC_TDI                              	0x0050 0x02dc 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1                        	0x0050 0x02dc 0x0000 1 0
+#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK                         	0x0050 0x02dc 0x05f8 2 0
+#define MX6UL_PAD_JTAG_TDI__PWM6_OUT                             	0x0050 0x02dc 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13                           	0x0050 0x02dc 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDI__MQS_LEFT                             	0x0050 0x02dc 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL                      	0x0050 0x02dc 0x0000 8 0
+#define MX6UL_PAD_JTAG_TCK__SJC_TCK                              	0x0054 0x02e0 0x0000 0 0
+#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2                        	0x0054 0x02e0 0x0000 1 0
+#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA                         	0x0054 0x02e0 0x0000 2 0
+#define MX6UL_PAD_JTAG_TCK__PWM7_OUT                             	0x0054 0x02e0 0x0000 4 0
+#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14                           	0x0054 0x02e0 0x0000 5 0
+#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL                      	0x0054 0x02e0 0x0000 8 0
+#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB                         	0x0058 0x02e4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3                     	0x0058 0x02e4 0x0000 1 0
+#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA                      	0x0058 0x02e4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT                          	0x0058 0x02e4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15                        	0x0058 0x02e4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS                  	0x0058 0x02e4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL                           	0x005c 0x02e8 0x05ac 0 1
+#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1                      	0x005c 0x02e8 0x058c 1 0
+#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID                     	0x005c 0x02e8 0x04b8 2 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1                     	0x005c 0x02e8 0x0574 3 0
+#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT                          	0x005c 0x02e8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00                         	0x005c 0x02e8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN               	0x005c 0x02e8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET                   	0x005c 0x02e8 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B                       	0x005c 0x02e8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA                           	0x0060 0x02ec 0x05b0 0 1
+#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1                      	0x0060 0x02ec 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC                        	0x0060 0x02ec 0x0664 2 0
+#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2                     	0x0060 0x02ec 0x057c 3 0
+#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT                           	0x0060 0x02ec 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01                         	0x0060 0x02ec 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT              	0x0060 0x02ec 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET                    	0x0060 0x02ec 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B                       	0x0060 0x02ec 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL                           	0x0064 0x02f0 0x05a4 0 0
+#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2                      	0x0064 0x02f0 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR                       	0x0064 0x02f0 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M                  	0x0064 0x02f0 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP                          	0x0064 0x02f0 0x066c 4 0
+#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02                         	0x0064 0x02f0 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00                   	0x0064 0x02f0 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET                   	0x0064 0x02f0 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX                           	0x0064 0x02f0 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX                           	0x0064 0x02f0 0x0624 8 0
+#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA                           	0x0068 0x02f4 0x05a8 0 1
+#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3                      	0x0068 0x02f4 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC                        	0x0068 0x02f4 0x0660 2 0
+#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B                        	0x0068 0x02f4 0x0668 4 0
+#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03                         	0x0068 0x02f4 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK                    	0x0068 0x02f4 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK                     	0x0068 0x02f4 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX                           	0x0068 0x02f4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX                           	0x0068 0x02f4 0x0624 8 1
+#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1                     	0x006c 0x02f8 0x0574 0 1
+#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT                           	0x006c 0x02f8 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR                       	0x006c 0x02f8 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B                     	0x006c 0x02f8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04                         	0x006c 0x02f8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN               	0x006c 0x02f8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX                           	0x006c 0x02f8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX                           	0x006c 0x02f8 0x0644 8 2
+#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2                     	0x0070 0x02fc 0x057c 0 1
+#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT                           	0x0070 0x02fc 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID                     	0x0070 0x02fc 0x04bc 2 0
+#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD                          	0x0070 0x02fc 0x0530 3 0
+#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT                     	0x0070 0x02fc 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05                         	0x0070 0x02fc 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT              	0x0070 0x02fc 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX                           	0x0070 0x02fc 0x0644 8 3
+#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX                           	0x0070 0x02fc 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO                         	0x0074 0x0300 0x0578 0 0
+#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO                         	0x0074 0x0300 0x0580 1 0
+#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE                   	0x0074 0x0300 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK                           	0x0074 0x0300 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP                          	0x0074 0x0300 0x069c 4 0
+#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06                         	0x0074 0x0300 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT                           	0x0074 0x0300 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B                       	0x0074 0x0300 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS                      	0x0074 0x0300 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS                      	0x0074 0x0300 0x0620 8 0
+#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC                          	0x0078 0x0304 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC                          	0x0078 0x0304 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE                  	0x0078 0x0304 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK                         	0x0078 0x0304 0x0528 3 0
+#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B                        	0x0078 0x0304 0x0674 4 1
+#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07                         	0x0078 0x0304 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO07__CCM_STOP                           	0x0078 0x0304 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS                      	0x0078 0x0304 0x0620 8 1
+#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS                      	0x0078 0x0304 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT                           	0x007c 0x0308 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B                       	0x007c 0x0308 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT                          	0x007c 0x0308 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC                          	0x007c 0x0308 0x052c 3 1
+#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT                     	0x007c 0x0308 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08                         	0x007c 0x0308 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY                       	0x007c 0x0308 0x04c0 6 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS                      	0x007c 0x0308 0x0640 8 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS                      	0x007c 0x0308 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT                           	0x0080 0x030c 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY                     	0x0080 0x030c 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN                           	0x0080 0x030c 0x0618 2 0
+#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC                          	0x0080 0x030c 0x0524 3 1
+#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B                     	0x0080 0x030c 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09                         	0x0080 0x030c 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B                     	0x0080 0x030c 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS                      	0x0080 0x030c 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS                      	0x0080 0x030c 0x0640 8 2
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX                        	0x0084 0x0310 0x0000 0 0
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX                        	0x0084 0x0310 0x0624 0 2
+#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02                   	0x0084 0x0310 0x0000 1 0
+#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL                        	0x0084 0x0310 0x05b4 2 0
+#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02                      	0x0084 0x0310 0x0000 3 0
+#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1                   	0x0084 0x0310 0x0000 4 0
+#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16                      	0x0084 0x0310 0x0000 5 0
+#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT                       	0x0084 0x0310 0x0000 8 0
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX                        	0x0088 0x0314 0x0624 0 3
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX                        	0x0088 0x0314 0x0000 0 0
+#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03                   	0x0088 0x0314 0x0000 1 0
+#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA                        	0x0088 0x0314 0x05b8 2 0
+#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03                      	0x0088 0x0314 0x0000 3 0
+#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK                        	0x0088 0x0314 0x0594 4 0
+#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17                      	0x0088 0x0314 0x0000 5 0
+#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN                        	0x0088 0x0314 0x0000 8 0
+#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS                     	0x008c 0x0318 0x0000 0 0
+#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS                     	0x008c 0x0318 0x0620 0 2
+#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK                      	0x008c 0x0318 0x0000 1 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP                         	0x008c 0x0318 0x066c 2 1
+#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04                        	0x008c 0x0318 0x0000 3 0
+#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN              	0x008c 0x0318 0x0000 4 0
+#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18                        	0x008c 0x0318 0x0000 5 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP                         	0x008c 0x0318 0x0000 8 0
+#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS                     	0x0090 0x031c 0x0620 0 3
+#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS                     	0x0090 0x031c 0x0000 0 0
+#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER                       	0x0090 0x031c 0x0000 1 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B                       	0x0090 0x031c 0x0668 2 1
+#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05                        	0x0090 0x031c 0x0000 3 0
+#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT             	0x0090 0x031c 0x0000 4 0
+#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19                        	0x0090 0x031c 0x0000 5 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B                       	0x0090 0x031c 0x0000 8 0
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX                        	0x0094 0x0320 0x0000 0 0
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX                        	0x0094 0x0320 0x062c 0 0
+#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02                   	0x0094 0x0320 0x0000 1 0
+#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL                        	0x0094 0x0320 0x05bc 2 0
+#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06                      	0x0094 0x0320 0x0000 3 0
+#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1                   	0x0094 0x0320 0x058c 4 1
+#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20                      	0x0094 0x0320 0x0000 5 0
+#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0                      	0x0094 0x0320 0x0000 8 0
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX                        	0x0098 0x0324 0x062c 0 1
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX                        	0x0098 0x0324 0x0000 0 0
+#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03                   	0x0098 0x0324 0x0000 1 0
+#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA                        	0x0098 0x0324 0x05c0 2 0
+#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07                      	0x0098 0x0324 0x0000 3 0
+#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2                   	0x0098 0x0324 0x0590 4 0
+#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21                      	0x0098 0x0324 0x0000 5 0
+#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE                        	0x0098 0x0324 0x0000 7 0
+#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK                     	0x0098 0x0324 0x0000 8 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS                     	0x009c 0x0328 0x0000 0 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS                     	0x009c 0x0328 0x0628 0 0
+#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS                         	0x009c 0x0328 0x0000 1 0
+#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX                       	0x009c 0x0328 0x0000 2 0
+#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08                        	0x009c 0x0328 0x0000 3 0
+#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2                     	0x009c 0x0328 0x0000 4 0
+#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22                        	0x009c 0x0328 0x0000 5 0
+#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B                          	0x009c 0x0328 0x0000 7 0
+#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI                       	0x009c 0x0328 0x0000 8 0
+#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS                     	0x00a0 0x032c 0x0628 0 1
+#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS                     	0x00a0 0x032c 0x0000 0 0
+#define MX6UL_PAD_UART2_RTS_B__ENET1_COL                         	0x00a0 0x032c 0x0000 1 0
+#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX                       	0x00a0 0x032c 0x0588 2 0
+#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09                        	0x00a0 0x032c 0x0000 3 0
+#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3                     	0x00a0 0x032c 0x0000 4 0
+#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23                        	0x00a0 0x032c 0x0000 5 0
+#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL                          	0x00a0 0x032c 0x0000 7 0
+#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO                       	0x00a0 0x032c 0x0000 8 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX                        	0x00a4 0x0330 0x0000 0 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX                        	0x00a4 0x0330 0x0634 0 0
+#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02                   	0x00a4 0x0330 0x0000 1 0
+#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD                   	0x00a4 0x0330 0x0000 2 0
+#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01                      	0x00a4 0x0330 0x0000 3 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS                   	0x00a4 0x0330 0x0000 4 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS                   	0x00a4 0x0330 0x0628 4 2
+#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24                      	0x00a4 0x0330 0x0000 5 0
+#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT                    	0x00a4 0x0330 0x0000 7 0
+#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID                  	0x00a4 0x0330 0x0000 8 0
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX                        	0x00a8 0x0334 0x0634 0 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX                        	0x00a8 0x0334 0x0000 0 0
+#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03                   	0x00a8 0x0334 0x0000 1 0
+#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD                   	0x00a8 0x0334 0x0000 2 0
+#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00                      	0x00a8 0x0334 0x0000 3 0
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS                   	0x00a8 0x0334 0x0628 4 3
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS                   	0x00a8 0x0334 0x0000 4 0
+#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25                      	0x00a8 0x0334 0x0000 5 0
+#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT                       	0x00a8 0x0334 0x0000 8 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS                     	0x00ac 0x0338 0x0000 0 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS                     	0x00ac 0x0338 0x0630 0 0
+#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK                      	0x00ac 0x0338 0x0000 1 0
+#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX                       	0x00ac 0x0338 0x0000 2 0
+#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10                        	0x00ac 0x0338 0x0000 3 0
+#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN              	0x00ac 0x0338 0x0000 4 0
+#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26                        	0x00ac 0x0338 0x0000 5 0
+#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT                         	0x00ac 0x0338 0x0000 8 0
+#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS                     	0x00b0 0x033c 0x0630 0 1
+#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS                     	0x00b0 0x033c 0x0000 0 0
+#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER                       	0x00b0 0x033c 0x0000 1 0
+#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX                       	0x00b0 0x033c 0x0584 2 0
+#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11                        	0x00b0 0x033c 0x0000 3 0
+#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT             	0x00b0 0x033c 0x0000 4 0
+#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27                        	0x00b0 0x033c 0x0000 5 0
+#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B                      	0x00b0 0x033c 0x0000 8 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX                        	0x00b4 0x0340 0x0000 0 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX                        	0x00b4 0x0340 0x063c 0 0
+#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02                   	0x00b4 0x0340 0x0000 1 0
+#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL                        	0x00b4 0x0340 0x05a4 2 1
+#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12                      	0x00b4 0x0340 0x0000 3 0
+#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02             	0x00b4 0x0340 0x0000 4 0
+#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28                      	0x00b4 0x0340 0x0000 5 0
+#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK                     	0x00b4 0x0340 0x0000 8 0
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX                        	0x00b8 0x0344 0x063c 0 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX                        	0x00b8 0x0344 0x0000 0 0
+#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03                   	0x00b8 0x0344 0x0000 1 0
+#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA                        	0x00b8 0x0344 0x05a8 2 2
+#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13                      	0x00b8 0x0344 0x0000 3 0
+#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01             	0x00b8 0x0344 0x0000 4 0
+#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29                      	0x00b8 0x0344 0x0000 5 0
+#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0                      	0x00b8 0x0344 0x0000 8 0
+#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30                      	0x00bc 0x0348 0x0000 5 0
+#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI                     	0x00bc 0x0348 0x0000 8 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX                        	0x00bc 0x0348 0x0000 0 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX                        	0x00bc 0x0348 0x0644 0 4
+#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS                       	0x00bc 0x0348 0x0000 1 0
+#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL                        	0x00bc 0x0348 0x05ac 2 2
+#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14                      	0x00bc 0x0348 0x0000 3 0
+#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00             	0x00bc 0x0348 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX                        	0x00c0 0x034c 0x0644 0 5
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX                        	0x00c0 0x034c 0x0000 0 0
+#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL                       	0x00c0 0x034c 0x0000 1 0
+#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA                        	0x00c0 0x034c 0x05b0 2 2
+#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15                      	0x00c0 0x034c 0x0000 3 0
+#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB                 	0x00c0 0x034c 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31                      	0x00c0 0x034c 0x0000 5 0
+#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO                     	0x00c0 0x034c 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00                  	0x00c4 0x0350 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS                  	0x00c4 0x0350 0x0638 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS                  	0x00c4 0x0350 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT                       	0x00c4 0x0350 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16                     	0x00c4 0x0350 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX                    	0x00c4 0x0350 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00                     	0x00c4 0x0350 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00                      	0x00c4 0x0350 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL                    	0x00c4 0x0350 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01                  	0x00c8 0x0354 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS                  	0x00c8 0x0354 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS                  	0x00c8 0x0354 0x0638 1 1
+#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT                       	0x00c8 0x0354 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17                     	0x00c8 0x0354 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX                    	0x00c8 0x0354 0x0584 4 1
+#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01                     	0x00c8 0x0354 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00                      	0x00c8 0x0354 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL                    	0x00c8 0x0354 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN                       	0x00cc 0x0358 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS                     	0x00cc 0x0358 0x0640 1 3
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS                     	0x00cc 0x0358 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18                        	0x00cc 0x0358 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX                       	0x00cc 0x0358 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02                        	0x00cc 0x0358 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01                         	0x00cc 0x0358 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT                    	0x00cc 0x0358 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00                  	0x00d0 0x035c 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS                  	0x00d0 0x035c 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                  	0x00d0 0x035c 0x0640 1 4
+#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19                     	0x00d0 0x035c 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX                    	0x00d0 0x035c 0x0588 4 1
+#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03                     	0x00d0 0x035c 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01                      	0x00d0 0x035c 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT                 	0x00d0 0x035c 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01                  	0x00d4 0x0360 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS                  	0x00d4 0x0360 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS                  	0x00d4 0x0360 0x0648 1 2
+#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT                       	0x00d4 0x0360 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20                     	0x00d4 0x0360 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO                     	0x00d4 0x0360 0x0580 4 1
+#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04                     	0x00d4 0x0360 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02                      	0x00d4 0x0360 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB           	0x00d4 0x0360 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN                       	0x00d8 0x0364 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS                     	0x00d8 0x0364 0x0648 1 3
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS                     	0x00d8 0x0364 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT                          	0x00d8 0x0364 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21                        	0x00d8 0x0364 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC                         	0x00d8 0x0364 0x0000 4 0
+#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05                        	0x00d8 0x0364 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02                         	0x00d8 0x0364 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB              	0x00d8 0x0364 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK                     	0x00dc 0x0368 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS                    	0x00dc 0x0368 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS                    	0x00dc 0x0368 0x0650 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT                         	0x00dc 0x0368 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22                       	0x00dc 0x0368 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                   	0x00dc 0x0368 0x0574 4 2
+#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06                       	0x00dc 0x0368 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03                        	0x00dc 0x0368 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK                         	0x00dc 0x0368 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER                       	0x00e0 0x036c 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS                     	0x00e0 0x036c 0x0650 1 1
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS                     	0x00e0 0x036c 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT                          	0x00e0 0x036c 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23                        	0x00e0 0x036c 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE                           	0x00e0 0x036c 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07                        	0x00e0 0x036c 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03                         	0x00e0 0x036c 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2                     	0x00e0 0x036c 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00                  	0x00e4 0x0370 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX                       	0x00e4 0x0370 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX                    	0x00e4 0x0370 0x064c 1 1
+#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD                	0x00e4 0x0370 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL                       	0x00e4 0x0370 0x05b4 3 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO                     	0x00e4 0x0370 0x0578 4 1
+#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08                     	0x00e4 0x0370 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04                      	0x00e4 0x0370 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR                   	0x00e4 0x0370 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01                  	0x00e8 0x0374 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX                       	0x00e8 0x0374 0x064c 1 2
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX                       	0x00e8 0x0374 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK                 	0x00e8 0x0374 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA                       	0x00e8 0x0374 0x05b8 3 1
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC                      	0x00e8 0x0374 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09                     	0x00e8 0x0374 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04                      	0x00e8 0x0374 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC                    	0x00e8 0x0374 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN                       	0x00ec 0x0378 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX                          	0x00ec 0x0378 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX                          	0x00ec 0x0378 0x0654 1 0
+#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B                  	0x00ec 0x0378 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL                          	0x00ec 0x0378 0x05bc 3 1
+#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26                        	0x00ec 0x0378 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10                        	0x00ec 0x0378 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05                         	0x00ec 0x0378 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M                 	0x00ec 0x0378 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00                  	0x00f0 0x037c 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX                       	0x00f0 0x037c 0x0654 1 1
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX                       	0x00f0 0x037c 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN                	0x00f0 0x037c 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA                       	0x00f0 0x037c 0x05c0 3 1
+#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02                     	0x00f0 0x037c 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11                     	0x00f0 0x037c 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05                      	0x00f0 0x037c 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01                  	0x00f4 0x0380 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX                       	0x00f4 0x0380 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX                       	0x00f4 0x0380 0x065c 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD                	0x00f4 0x0380 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK                    	0x00f4 0x0380 0x0564 3 0
+#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03                     	0x00f4 0x0380 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12                     	0x00f4 0x0380 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06                      	0x00f4 0x0380 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR                   	0x00f4 0x0380 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN                       	0x00f8 0x0384 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX                          	0x00f8 0x0384 0x065c 1 1
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX                          	0x00f8 0x0384 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK                    	0x00f8 0x0384 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI                       	0x00f8 0x0384 0x056c 3 0
+#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN                  	0x00f8 0x0384 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13                        	0x00f8 0x0384 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06                         	0x00f8 0x0384 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC                       	0x00f8 0x0384 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK                     	0x00fc 0x0388 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS                    	0x00fc 0x0388 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS                    	0x00fc 0x0388 0x0658 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B                 	0x00fc 0x0388 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO                      	0x00fc 0x0388 0x0568 3 0
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                   	0x00fc 0x0388 0x057c 4 2
+#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14                       	0x00fc 0x0388 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07                        	0x00fc 0x0388 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID                   	0x00fc 0x0388 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER                       	0x0100 0x038c 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS                     	0x0100 0x038c 0x0658 1 1
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS                     	0x0100 0x038c 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN                   	0x0100 0x038c 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0                        	0x0100 0x038c 0x0000 3 0
+#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25                        	0x0100 0x038c 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15                        	0x0100 0x038c 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07                         	0x0100 0x038c 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY                    	0x0100 0x038c 0x0000 8 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_CLK                             	0x0104 0x0390 0x0000 0 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN                          	0x0104 0x0390 0x0000 1 0
+#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX                              	0x0104 0x0390 0x0000 2 0
+#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX                              	0x0104 0x0390 0x063c 2 2
+#define MX6UL_PAD_LCD_CLK__SAI3_MCLK                             	0x0104 0x0390 0x0000 3 0
+#define MX6UL_PAD_LCD_CLK__EIM_CS2_B                             	0x0104 0x0390 0x0000 4 0
+#define MX6UL_PAD_LCD_CLK__GPIO3_IO00                            	0x0104 0x0390 0x0000 5 0
+#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB                  	0x0104 0x0390 0x0000 8 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE                       	0x0108 0x0394 0x0000 0 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E                         	0x0108 0x0394 0x0000 1 0
+#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX                           	0x0108 0x0394 0x063c 2 3
+#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX                           	0x0108 0x0394 0x0000 2 0
+#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC                       	0x0108 0x0394 0x060c 3 0
+#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B                          	0x0108 0x0394 0x0000 4 0
+#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01                         	0x0108 0x0394 0x0000 5 0
+#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY                         	0x0108 0x0394 0x0000 8 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC                         	0x010c 0x0398 0x05dc 0 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS                            	0x010c 0x0398 0x0000 1 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS                       	0x010c 0x0398 0x0000 2 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS                       	0x010c 0x0398 0x0638 2 2
+#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK                        	0x010c 0x0398 0x0608 3 0
+#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB                	0x010c 0x0398 0x0000 4 0
+#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02                          	0x010c 0x0398 0x0000 5 0
+#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1                          	0x010c 0x0398 0x0000 8 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC                         	0x0110 0x039c 0x0000 0 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY                          	0x0110 0x039c 0x05dc 1 1
+#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS                       	0x0110 0x039c 0x0638 2 3
+#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS                       	0x0110 0x039c 0x0000 2 0
+#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA                        	0x0110 0x039c 0x0000 3 0
+#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B                        	0x0110 0x039c 0x0000 4 0
+#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03                          	0x0110 0x039c 0x0000 5 0
+#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2                          	0x0110 0x039c 0x0000 8 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_RESET                         	0x0114 0x03a0 0x0000 0 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_CS                            	0x0114 0x03a0 0x0000 1 0
+#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI                    	0x0114 0x03a0 0x0000 2 0
+#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA                        	0x0114 0x03a0 0x0000 3 0
+#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY                      	0x0114 0x03a0 0x0000 4 0
+#define MX6UL_PAD_LCD_RESET__GPIO3_IO04                          	0x0114 0x03a0 0x0000 5 0
+#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3                          	0x0114 0x03a0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00                       	0x0118 0x03a4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA00__PWM1_OUT                           	0x0118 0x03a4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN               	0x0118 0x03a4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA00__I2C3_SDA                           	0x0118 0x03a4 0x05b8 4 2
+#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05                         	0x0118 0x03a4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00                       	0x0118 0x03a4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK                          	0x0118 0x03a4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01                       	0x011c 0x03a8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA01__PWM2_OUT                           	0x011c 0x03a8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT              	0x011c 0x03a8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA01__I2C3_SCL                           	0x011c 0x03a8 0x05b4 4 2
+#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06                         	0x011c 0x03a8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01                       	0x011c 0x03a8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC                       	0x011c 0x03a8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02                       	0x0120 0x03ac 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA02__PWM3_OUT                           	0x0120 0x03ac 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN               	0x0120 0x03ac 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA02__I2C4_SDA                           	0x0120 0x03ac 0x05c0 4 2
+#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07                         	0x0120 0x03ac 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02                       	0x0120 0x03ac 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK                       	0x0120 0x03ac 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03                       	0x0124 0x03b0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA03__PWM4_OUT                           	0x0124 0x03b0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT              	0x0124 0x03b0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA03__I2C4_SCL                           	0x0124 0x03b0 0x05bc 4 2
+#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08                         	0x0124 0x03b0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03                       	0x0124 0x03b0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA                       	0x0124 0x03b0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04                       	0x0128 0x03b4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS                      	0x0128 0x03b4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS                      	0x0128 0x03b4 0x0658 1 2
+#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN               	0x0128 0x03b4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK                       	0x0128 0x03b4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09                         	0x0128 0x03b4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04                       	0x0128 0x03b4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA                       	0x0128 0x03b4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05                       	0x012c 0x03b8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS                      	0x012c 0x03b8 0x0658 1 3
+#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS                      	0x012c 0x03b8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT              	0x012c 0x03b8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT                          	0x012c 0x03b8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10                         	0x012c 0x03b8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05                       	0x012c 0x03b8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1                         	0x012c 0x03b8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06                       	0x0130 0x03bc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS                      	0x0130 0x03bc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS                      	0x0130 0x03bc 0x0650 1 2
+#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN               	0x0130 0x03bc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK                         	0x0130 0x03bc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11                         	0x0130 0x03bc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06                       	0x0130 0x03bc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2                         	0x0130 0x03bc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07                       	0x0134 0x03c0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS                      	0x0134 0x03c0 0x0650 1 3
+#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS                      	0x0134 0x03c0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT              	0x0134 0x03c0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK                      	0x0134 0x03c0 0x061c 4 0
+#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12                         	0x0134 0x03c0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07                       	0x0134 0x03c0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3                         	0x0134 0x03c0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08                       	0x0138 0x03c4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA08__SPDIF_IN                           	0x0138 0x03c4 0x0618 1 2
+#define MX6UL_PAD_LCD_DATA08__CSI_DATA16                         	0x0138 0x03c4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA08__EIM_DATA00                         	0x0138 0x03c4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13                         	0x0138 0x03c4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08                       	0x0138 0x03c4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX                        	0x0138 0x03c4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09                       	0x013c 0x03c8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK                          	0x013c 0x03c8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA09__CSI_DATA17                         	0x013c 0x03c8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA09__EIM_DATA01                         	0x013c 0x03c8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14                         	0x013c 0x03c8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09                       	0x013c 0x03c8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX                        	0x013c 0x03c8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10                       	0x0140 0x03cc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC                       	0x0140 0x03cc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA10__CSI_DATA18                         	0x0140 0x03cc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA10__EIM_DATA02                         	0x0140 0x03cc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15                         	0x0140 0x03cc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10                       	0x0140 0x03cc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX                        	0x0140 0x03cc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11                       	0x0144 0x03d0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK                       	0x0144 0x03d0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA11__CSI_DATA19                         	0x0144 0x03d0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA11__EIM_DATA03                         	0x0144 0x03d0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16                         	0x0144 0x03d0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11                       	0x0144 0x03d0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX                        	0x0144 0x03d0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12                       	0x0148 0x03d4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC                       	0x0148 0x03d4 0x060c 1 1
+#define MX6UL_PAD_LCD_DATA12__CSI_DATA20                         	0x0148 0x03d4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA12__EIM_DATA04                         	0x0148 0x03d4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17                         	0x0148 0x03d4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12                       	0x0148 0x03d4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY                         	0x0148 0x03d4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13                       	0x014c 0x03d8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK                       	0x014c 0x03d8 0x0608 1 1
+#define MX6UL_PAD_LCD_DATA13__CSI_DATA21                         	0x014c 0x03d8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA13__EIM_DATA05                         	0x014c 0x03d8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18                         	0x014c 0x03d8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13                       	0x014c 0x03d8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B                     	0x014c 0x03d8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14                       	0x0150 0x03dc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA                       	0x0150 0x03dc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA14__CSI_DATA22                         	0x0150 0x03dc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA14__EIM_DATA06                         	0x0150 0x03dc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19                         	0x0150 0x03dc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14                       	0x0150 0x03dc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4                       	0x0150 0x03dc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15                       	0x0154 0x03e0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA                       	0x0154 0x03e0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA15__CSI_DATA23                         	0x0154 0x03e0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA15__EIM_DATA07                         	0x0154 0x03e0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20                         	0x0154 0x03e0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15                       	0x0154 0x03e0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5                       	0x0154 0x03e0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16                       	0x0158 0x03e4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX                           	0x0158 0x03e4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX                           	0x0158 0x03e4 0x0654 1 2
+#define MX6UL_PAD_LCD_DATA16__CSI_DATA01                         	0x0158 0x03e4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA16__EIM_DATA08                         	0x0158 0x03e4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21                         	0x0158 0x03e4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24                       	0x0158 0x03e4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6                       	0x0158 0x03e4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17                       	0x015c 0x03e8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX                           	0x015c 0x03e8 0x0654 1 3
+#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX                           	0x015c 0x03e8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA17__CSI_DATA00                         	0x015c 0x03e8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA17__EIM_DATA09                         	0x015c 0x03e8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22                         	0x015c 0x03e8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25                       	0x015c 0x03e8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7                       	0x015c 0x03e8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18                       	0x0160 0x03ec 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA18__PWM5_OUT                           	0x0160 0x03ec 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO                   	0x0160 0x03ec 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA18__CSI_DATA10                         	0x0160 0x03ec 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA18__EIM_DATA10                         	0x0160 0x03ec 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23                         	0x0160 0x03ec 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26                       	0x0160 0x03ec 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD                         	0x0160 0x03ec 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA19__EIM_DATA11                         	0x0164 0x03f0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24                         	0x0164 0x03f0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27                       	0x0164 0x03f0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK                         	0x0164 0x03f0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19                       	0x0164 0x03f0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA19__PWM6_OUT                           	0x0164 0x03f0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY                     	0x0164 0x03f0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA19__CSI_DATA11                         	0x0164 0x03f0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA20__EIM_DATA12                         	0x0168 0x03f4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25                         	0x0168 0x03f4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28                       	0x0168 0x03f4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0                       	0x0168 0x03f4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20                       	0x0168 0x03f4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX                           	0x0168 0x03f4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX                           	0x0168 0x03f4 0x065c 1 2
+#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK                        	0x0168 0x03f4 0x0534 2 0
+#define MX6UL_PAD_LCD_DATA20__CSI_DATA12                         	0x0168 0x03f4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21                       	0x016c 0x03f8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX                           	0x016c 0x03f8 0x065c 1 3
+#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX                           	0x016c 0x03f8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0                         	0x016c 0x03f8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA21__CSI_DATA13                         	0x016c 0x03f8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA21__EIM_DATA13                         	0x016c 0x03f8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26                         	0x016c 0x03f8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29                       	0x016c 0x03f8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1                       	0x016c 0x03f8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22                       	0x0170 0x03fc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT                          	0x0170 0x03fc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI                        	0x0170 0x03fc 0x053c 2 0
+#define MX6UL_PAD_LCD_DATA22__CSI_DATA14                         	0x0170 0x03fc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA22__EIM_DATA14                         	0x0170 0x03fc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27                         	0x0170 0x03fc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30                       	0x0170 0x03fc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2                       	0x0170 0x03fc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23                       	0x0174 0x0400 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA23__MQS_LEFT                           	0x0174 0x0400 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO                        	0x0174 0x0400 0x0538 2 0
+#define MX6UL_PAD_LCD_DATA23__CSI_DATA15                         	0x0174 0x0400 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA23__EIM_DATA15                         	0x0174 0x0400 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28                         	0x0174 0x0400 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31                       	0x0174 0x0400 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3                       	0x0174 0x0400 0x0000 8 0
+#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B                        	0x0178 0x0404 0x0000 0 0
+#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK                          	0x0178 0x0404 0x0670 1 2
+#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK                         	0x0178 0x0404 0x0000 2 0
+#define MX6UL_PAD_NAND_RE_B__KPP_ROW00                           	0x0178 0x0404 0x0000 3 0
+#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00                          	0x0178 0x0404 0x0000 4 0
+#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00                          	0x0178 0x0404 0x0000 5 0
+#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2                          	0x0178 0x0404 0x0000 8 0
+#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B                        	0x017c 0x0408 0x0000 0 0
+#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD                          	0x017c 0x0408 0x0678 1 2
+#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B                        	0x017c 0x0408 0x0000 2 0
+#define MX6UL_PAD_NAND_WE_B__KPP_COL00                           	0x017c 0x0408 0x0000 3 0
+#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01                          	0x017c 0x0408 0x0000 4 0
+#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01                          	0x017c 0x0408 0x0000 5 0
+#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3                          	0x017c 0x0408 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00                    	0x0180 0x040c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0                      	0x0180 0x040c 0x067c 1 2
+#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B                      	0x0180 0x040c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA00__KPP_ROW01                         	0x0180 0x040c 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA00__EIM_AD08                          	0x0180 0x040c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02                        	0x0180 0x040c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY                        	0x0180 0x040c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01                    	0x0184 0x0410 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1                      	0x0184 0x0410 0x0680 1 2
+#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS                        	0x0184 0x0410 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA01__KPP_COL01                         	0x0184 0x0410 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA01__EIM_AD09                          	0x0184 0x0410 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03                        	0x0184 0x0410 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1                        	0x0184 0x0410 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02                    	0x0188 0x0414 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2                      	0x0188 0x0414 0x0684 1 1
+#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00                     	0x0188 0x0414 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA02__KPP_ROW02                         	0x0188 0x0414 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA02__EIM_AD10                          	0x0188 0x0414 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04                        	0x0188 0x0414 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2                        	0x0188 0x0414 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03                    	0x018c 0x0418 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3                      	0x018c 0x0418 0x0688 1 2
+#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01                     	0x018c 0x0418 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA03__KPP_COL02                         	0x018c 0x0418 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA03__EIM_AD11                          	0x018c 0x0418 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05                        	0x018c 0x0418 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3                        	0x018c 0x0418 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04                    	0x0190 0x041c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4                      	0x0190 0x041c 0x068c 1 1
+#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02                     	0x0190 0x041c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK                       	0x0190 0x041c 0x0564 3 1
+#define MX6UL_PAD_NAND_DATA04__EIM_AD12                          	0x0190 0x041c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06                        	0x0190 0x041c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX                          	0x0190 0x041c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX                          	0x0190 0x041c 0x062c 8 2
+#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05                    	0x0194 0x0420 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5                      	0x0194 0x0420 0x0690 1 1
+#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03                     	0x0194 0x0420 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI                       	0x0194 0x0420 0x056c 3 1
+#define MX6UL_PAD_NAND_DATA05__EIM_AD13                          	0x0194 0x0420 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07                        	0x0194 0x0420 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX                          	0x0194 0x0420 0x062c 8 3
+#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX                          	0x0194 0x0420 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06                    	0x0198 0x0424 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6                      	0x0198 0x0424 0x0694 1 1
+#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK                      	0x0198 0x0424 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO                       	0x0198 0x0424 0x0568 3 1
+#define MX6UL_PAD_NAND_DATA06__EIM_AD14                          	0x0198 0x0424 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08                        	0x0198 0x0424 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS                     	0x0198 0x0424 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS                     	0x0198 0x0424 0x0628 8 4
+#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07                    	0x019c 0x0428 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7                      	0x019c 0x0428 0x0698 1 1
+#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B                      	0x019c 0x0428 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0                        	0x019c 0x0428 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA07__EIM_AD15                          	0x019c 0x0428 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09                        	0x019c 0x0428 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS                     	0x019c 0x0428 0x0628 8 5
+#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS                     	0x019c 0x0428 0x0000 8 0
+#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE                          	0x01a0 0x042c 0x0000 0 0
+#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B                       	0x01a0 0x042c 0x0000 1 0
+#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS                           	0x01a0 0x042c 0x0000 2 0
+#define MX6UL_PAD_NAND_ALE__PWM3_OUT                             	0x01a0 0x042c 0x0000 3 0
+#define MX6UL_PAD_NAND_ALE__EIM_ADDR17                           	0x01a0 0x042c 0x0000 4 0
+#define MX6UL_PAD_NAND_ALE__GPIO4_IO10                           	0x01a0 0x042c 0x0000 5 0
+#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1                           	0x01a0 0x042c 0x0000 8 0
+#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B                        	0x01a4 0x0430 0x0000 0 0
+#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B                      	0x01a4 0x0430 0x0000 1 0
+#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK                         	0x01a4 0x0430 0x0000 2 0
+#define MX6UL_PAD_NAND_WP_B__PWM4_OUT                            	0x01a4 0x0430 0x0000 3 0
+#define MX6UL_PAD_NAND_WP_B__EIM_BCLK                            	0x01a4 0x0430 0x0000 4 0
+#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11                          	0x01a4 0x0430 0x0000 5 0
+#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY                          	0x01a4 0x0430 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B                  	0x01a8 0x0434 0x0000 0 0
+#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4                     	0x01a8 0x0434 0x0000 1 0
+#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00                    	0x01a8 0x0434 0x0000 2 0
+#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0                       	0x01a8 0x0434 0x0000 3 0
+#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B                        	0x01a8 0x0434 0x0000 4 0
+#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12                       	0x01a8 0x0434 0x0000 5 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX                         	0x01a8 0x0434 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX                         	0x01a8 0x0434 0x0634 8 2
+#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B                      	0x01ac 0x0438 0x0000 0 0
+#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5                       	0x01ac 0x0438 0x0000 1 0
+#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01                      	0x01ac 0x0438 0x0000 2 0
+#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK                        	0x01ac 0x0438 0x0554 3 1
+#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B                        	0x01ac 0x0438 0x0000 4 0
+#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13                         	0x01ac 0x0438 0x0000 5 0
+#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX                           	0x01ac 0x0438 0x0634 8 3
+#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX                           	0x01ac 0x0438 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B                      	0x01b0 0x043c 0x0000 0 0
+#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6                       	0x01b0 0x043c 0x0000 1 0
+#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02                      	0x01b0 0x043c 0x0000 2 0
+#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI                        	0x01b0 0x043c 0x055c 3 1
+#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18                         	0x01b0 0x043c 0x0000 4 0
+#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14                         	0x01b0 0x043c 0x0000 5 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS                      	0x01b0 0x043c 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS                      	0x01b0 0x043c 0x0630 8 2
+#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE                          	0x01b4 0x0440 0x0000 0 0
+#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7                         	0x01b4 0x0440 0x0000 1 0
+#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03                        	0x01b4 0x0440 0x0000 2 0
+#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO                          	0x01b4 0x0440 0x0558 3 1
+#define MX6UL_PAD_NAND_CLE__EIM_ADDR16                           	0x01b4 0x0440 0x0000 4 0
+#define MX6UL_PAD_NAND_CLE__GPIO4_IO15                           	0x01b4 0x0440 0x0000 5 0
+#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS                        	0x01b4 0x0440 0x0630 8 3
+#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS                        	0x01b4 0x0440 0x0000 8 0
+#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS                          	0x01b8 0x0444 0x0000 0 0
+#define MX6UL_PAD_NAND_DQS__CSI_FIELD                            	0x01b8 0x0444 0x0530 1 1
+#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B                         	0x01b8 0x0444 0x0000 2 0
+#define MX6UL_PAD_NAND_DQS__PWM5_OUT                             	0x01b8 0x0444 0x0000 3 0
+#define MX6UL_PAD_NAND_DQS__EIM_WAIT                             	0x01b8 0x0444 0x0000 4 0
+#define MX6UL_PAD_NAND_DQS__GPIO4_IO16                           	0x01b8 0x0444 0x0000 5 0
+#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01                     	0x01b8 0x0444 0x0000 6 0
+#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK                        	0x01b8 0x0444 0x0000 8 0
+#define MX6UL_PAD_SD1_CMD__USDHC1_CMD                            	0x01bc 0x0448 0x0000 0 0
+#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1                         	0x01bc 0x0448 0x0000 1 0
+#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC                          	0x01bc 0x0448 0x0000 2 0
+#define MX6UL_PAD_SD1_CMD__SPDIF_OUT                             	0x01bc 0x0448 0x0000 3 0
+#define MX6UL_PAD_SD1_CMD__EIM_ADDR19                            	0x01bc 0x0448 0x0000 4 0
+#define MX6UL_PAD_SD1_CMD__GPIO2_IO16                            	0x01bc 0x0448 0x0000 5 0
+#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00                      	0x01bc 0x0448 0x0000 6 0
+#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR                          	0x01bc 0x0448 0x0000 8 0
+#define MX6UL_PAD_SD1_CLK__USDHC1_CLK                            	0x01c0 0x044c 0x0000 0 0
+#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2                         	0x01c0 0x044c 0x0000 1 0
+#define MX6UL_PAD_SD1_CLK__SAI2_MCLK                             	0x01c0 0x044c 0x0000 2 0
+#define MX6UL_PAD_SD1_CLK__SPDIF_IN                              	0x01c0 0x044c 0x0618 3 3
+#define MX6UL_PAD_SD1_CLK__EIM_ADDR20                            	0x01c0 0x044c 0x0000 4 0
+#define MX6UL_PAD_SD1_CLK__GPIO2_IO17                            	0x01c0 0x044c 0x0000 5 0
+#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC                           	0x01c0 0x044c 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0                        	0x01c4 0x0450 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3                       	0x01c4 0x0450 0x0000 1 0
+#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC                        	0x01c4 0x0450 0x05fc 2 1
+#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX                         	0x01c4 0x0450 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21                          	0x01c4 0x0450 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18                          	0x01c4 0x0450 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID                      	0x01c4 0x0450 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1                        	0x01c8 0x0454 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA1__GPT2_CLK                            	0x01c8 0x0454 0x05a0 1 1
+#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK                        	0x01c8 0x0454 0x05f8 2 1
+#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX                         	0x01c8 0x0454 0x0584 3 3
+#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22                          	0x01c8 0x0454 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19                          	0x01c8 0x0454 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR                        	0x01c8 0x0454 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2                        	0x01cc 0x0458 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1                       	0x01cc 0x0458 0x0598 1 1
+#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA                        	0x01cc 0x0458 0x05f4 2 1
+#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX                         	0x01cc 0x0458 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23                          	0x01cc 0x0458 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20                          	0x01cc 0x0458 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1                           	0x01cc 0x0458 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC                         	0x01cc 0x0458 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3                        	0x01d0 0x045c 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2                       	0x01d0 0x045c 0x059c 1 1
+#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA                        	0x01d0 0x045c 0x0000 2 0
+#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX                         	0x01d0 0x045c 0x0588 3 3
+#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24                          	0x01d0 0x045c 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21                          	0x01d0 0x045c 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2                           	0x01d0 0x045c 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID                      	0x01d0 0x045c 0x0000 8 0
+#define MX6UL_PAD_CSI_MCLK__CSI_MCLK                             	0x01d4 0x0460 0x0000 0 0
+#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B                          	0x01d4 0x0460 0x0674 1 0
+#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B                        	0x01d4 0x0460 0x0000 2 0
+#define MX6UL_PAD_CSI_MCLK__I2C1_SDA                             	0x01d4 0x0460 0x05a8 3 0
+#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B                            	0x01d4 0x0460 0x0000 4 0
+#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17                           	0x01d4 0x0460 0x0000 5 0
+#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL                    	0x01d4 0x0460 0x0000 6 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX                             	0x01d4 0x0460 0x0000 8 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX                             	0x01d4 0x0460 0x064c 8 0
+#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK                         	0x01d8 0x0464 0x0528 0 1
+#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP                          	0x01d8 0x0464 0x069c 1 2
+#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B                      	0x01d8 0x0464 0x0000 2 0
+#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL                           	0x01d8 0x0464 0x05a4 3 2
+#define MX6UL_PAD_CSI_PIXCLK__EIM_OE                             	0x01d8 0x0464 0x0000 4 0
+#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18                         	0x01d8 0x0464 0x0000 5 0
+#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5                      	0x01d8 0x0464 0x0000 6 0
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX                           	0x01d8 0x0464 0x064c 8 3
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX                           	0x01d8 0x0464 0x0000 8 0
+#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC                           	0x01dc 0x0468 0x052c 0 0
+#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK                          	0x01dc 0x0468 0x0670 1 0
+#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK                      	0x01dc 0x0468 0x0000 2 0
+#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA                            	0x01dc 0x0468 0x05b0 3 0
+#define MX6UL_PAD_CSI_VSYNC__EIM_RW                              	0x01dc 0x0468 0x0000 4 0
+#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19                          	0x01dc 0x0468 0x0000 5 0
+#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT                            	0x01dc 0x0468 0x0000 6 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS                       	0x01dc 0x0468 0x0648 8 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS                       	0x01dc 0x0468 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC                           	0x01e0 0x046c 0x0524 0 0
+#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD                          	0x01e0 0x046c 0x0678 1 0
+#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD                       	0x01e0 0x046c 0x0000 2 0
+#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL                            	0x01e0 0x046c 0x05ac 3 0
+#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B                           	0x01e0 0x046c 0x0000 4 0
+#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20                          	0x01e0 0x046c 0x0000 5 0
+#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT                            	0x01e0 0x046c 0x0000 6 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS                       	0x01e0 0x046c 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS                       	0x01e0 0x046c 0x0648 8 1
+#define MX6UL_PAD_CSI_DATA00__CSI_DATA02                         	0x01e4 0x0470 0x04c4 0 0
+#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0                       	0x01e4 0x0470 0x067c 1 0
+#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B                   	0x01e4 0x0470 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK                        	0x01e4 0x0470 0x0544 3 0
+#define MX6UL_PAD_CSI_DATA00__EIM_AD00                           	0x01e4 0x0470 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21                         	0x01e4 0x0470 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT                       	0x01e4 0x0470 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX                           	0x01e4 0x0470 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX                           	0x01e4 0x0470 0x0644 8 0
+#define MX6UL_PAD_CSI_DATA01__CSI_DATA03                         	0x01e8 0x0474 0x04c8 0 0
+#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1                       	0x01e8 0x0474 0x0680 1 0
+#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN                    	0x01e8 0x0474 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0                         	0x01e8 0x0474 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA01__EIM_AD01                           	0x01e8 0x0474 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22                         	0x01e8 0x0474 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK                          	0x01e8 0x0474 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX                           	0x01e8 0x0474 0x0644 8 1
+#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX                           	0x01e8 0x0474 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA02__CSI_DATA04                         	0x01ec 0x0478 0x04d8 0 1
+#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2                       	0x01ec 0x0478 0x0684 1 2
+#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD                    	0x01ec 0x0478 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI                        	0x01ec 0x0478 0x054c 3 1
+#define MX6UL_PAD_CSI_DATA02__EIM_AD02                           	0x01ec 0x0478 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23                         	0x01ec 0x0478 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC                       	0x01ec 0x0478 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS                      	0x01ec 0x0478 0x0640 8 5
+#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS                      	0x01ec 0x0478 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__CSI_DATA05                         	0x01f0 0x047c 0x04cc 0 0
+#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3                       	0x01f0 0x047c 0x0688 1 0
+#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD                      	0x01f0 0x047c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO                        	0x01f0 0x047c 0x0548 3 0
+#define MX6UL_PAD_CSI_DATA03__EIM_AD03                           	0x01f0 0x047c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24                         	0x01f0 0x047c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK                       	0x01f0 0x047c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS                      	0x01f0 0x047c 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS                      	0x01f0 0x047c 0x0640 8 0
+#define MX6UL_PAD_CSI_DATA04__CSI_DATA06                         	0x01f4 0x0480 0x04dc 0 1
+#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4                       	0x01f4 0x0480 0x068c 1 2
+#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK                     	0x01f4 0x0480 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK                        	0x01f4 0x0480 0x0534 3 1
+#define MX6UL_PAD_CSI_DATA04__EIM_AD04                           	0x01f4 0x0480 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25                         	0x01f4 0x0480 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC                       	0x01f4 0x0480 0x05ec 6 1
+#define MX6UL_PAD_CSI_DATA04__USDHC1_WP                          	0x01f4 0x0480 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA05__CSI_DATA07                         	0x01f8 0x0484 0x04e0 0 1
+#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5                       	0x01f8 0x0484 0x0690 1 2
+#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B                   	0x01f8 0x0484 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0                         	0x01f8 0x0484 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA05__EIM_AD05                           	0x01f8 0x0484 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26                         	0x01f8 0x0484 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK                       	0x01f8 0x0484 0x05e8 6 1
+#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B                        	0x01f8 0x0484 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA06__CSI_DATA08                         	0x01fc 0x0488 0x04e4 0 1
+#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6                       	0x01fc 0x0488 0x0694 1 2
+#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN                    	0x01fc 0x0488 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI                        	0x01fc 0x0488 0x053c 3 1
+#define MX6UL_PAD_CSI_DATA06__EIM_AD06                           	0x01fc 0x0488 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27                         	0x01fc 0x0488 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA                       	0x01fc 0x0488 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B                     	0x01fc 0x0488 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA07__CSI_DATA09                         	0x0200 0x048c 0x04e8 0 1
+#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7                       	0x0200 0x048c 0x0698 1 2
+#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD                    	0x0200 0x048c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO                        	0x0200 0x048c 0x0538 3 1
+#define MX6UL_PAD_CSI_DATA07__EIM_AD07                           	0x0200 0x048c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28                         	0x0200 0x048c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA                       	0x0200 0x048c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT                     	0x0200 0x048c 0x0000 8 0
+
+#endif /* __DTS_IMX6UL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
new file mode 100644
index 000000000000..09edbedfd908
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -0,0 +1,707 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			operating-points = <
+				/* kHz	uV */
+				528000	1250000
+				396000	1150000
+				198000	1150000
+			>;
+			fsl,soc-operating-points = <
+				/* KHz	uV */
+				528000	1250000
+				396000	1150000
+				198000	1150000
+			>;
+			clocks = <&clks IMX6UL_CLK_ARM>,
+				 <&clks IMX6UL_CLK_PLL2_BUS>,
+				 <&clks IMX6UL_CLK_PLL2_PFD2>,
+				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
+				 <&clks IMX6UL_CLK_STEP>,
+				 <&clks IMX6UL_CLK_PLL1_SW>,
+				 <&clks IMX6UL_CLK_PLL1_SYS>,
+				 <&clks IMX6UL_PLL1_BYPASS>,
+				 <&clks IMX6UL_CLK_PLL1>,
+				 <&clks IMX6UL_PLL1_BYPASS_SRC>,
+				 <&clks IMX6UL_CLK_OSC>;
+			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
+				      "secondary_sel", "step", "pll1_sw",
+				      "pll1_sys", "pll1_bypass", "pll1",
+				      "pll1_bypass_src", "osc";
+			arm-supply = <&reg_arm>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a02000 0x1000>,
+		      <0x00a04000 0x2000>,
+		      <0x00a06000 0x2000>;
+	};
+
+	ckil: clock-cli {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		aips1: aips-bus@02000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				ecspi1: ecspi@02008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI1>,
+						 <&clks IMX6UL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI2>,
+						 <&clks IMX6UL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI3>,
+						 <&clks IMX6UL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI4>,
+						 <&clks IMX6UL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart7: serial@02018000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
+						 <&clks IMX6UL_CLK_UART7_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
+						 <&clks IMX6UL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart8: serial@02024000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+						 <&clks IMX6UL_CLK_UART8_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			gpt1: gpt@02098000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
+					 <&clks IMX6UL_CLK_GPT1_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			fec2: ethernet@020b4000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<1>;
+				fsl,num-rx-queues=<1>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG1>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6ul-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_3p0: regulator-3p0@120 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "cpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			epit1: epit@020d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@020d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+			};
+
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6ul-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@020e4000 {
+				compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			gpt2: gpt@020e8000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_DUMMY>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm5: pwm@020f0000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f0000 0x4000>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_DUMMY>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm6: pwm@020f4000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f4000 0x4000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_DUMMY>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm7: pwm@020f8000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_DUMMY>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm8: pwm@020fc000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_DUMMY>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@02184000 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@02184200 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			fec1: ethernet@02188000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET_REF>,
+					 <&clks IMX6UL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<1>;
+				fsl,num-rx-queues=<1>;
+				status = "disabled";
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			qspi: qspi@021e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_QSPI>,
+					 <&clks IMX6UL_CLK_QSPI>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			uart2: serial@021e8000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
+					 <&clks IMX6UL_CLK_UART2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@021ec000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
+					 <&clks IMX6UL_CLK_UART3_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@021f0000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
+					 <&clks IMX6UL_CLK_UART4_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@021f4000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
+					 <&clks IMX6UL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c4: i2c@021f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C4>;
+				status = "disabled";
+			};
+
+			uart6: serial@021fc000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021fc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
+					 <&clks IMX6UL_CLK_UART6_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index c42cf8db0451..b738ce0f9d9b 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -121,6 +121,209 @@
 		clock-output-names = "osc";
 	};
 
+	etr@30086000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0x30086000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etr_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	tpiu@30087000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0x30087000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			tpiu_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	replicator {
+		/*
+		 * non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell"
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
+	etf@30084000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0x30084000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				etf_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&hugo_funnel_out_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <0>;
+				etf_out_port: endpoint {
+					remote-endpoint = <&replicator_in_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@30083000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0x30083000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel input ports */
+			port@0 {
+				reg = <0>;
+				hugo_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ca_funnel_out_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				hugo_funnel_in_port1: endpoint {
+					slave-mode; /* M4 input */
+				};
+			};
+
+			port@2 {
+				reg = <0>;
+				hugo_funnel_out_port0: endpoint {
+					remote-endpoint = <&etf_in_port>;
+				};
+			};
+
+			/* the other input ports are not connect to anything */
+		};
+	};
+
+	funnel@30041000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0x30041000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel input ports */
+			port@0 {
+				reg = <0>;
+				ca_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				ca_funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			/* funnel output port */
+			port@2 {
+				reg = <0>;
+				ca_funnel_out_port0: endpoint {
+					remote-endpoint = <&hugo_funnel_in_port0>;
+				};
+			};
+
+			/* the other input ports are not connect to anything */
+		};
+	};
+
+	etm@3007c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x3007c000 0x1000>;
+		cpu = <&cpu0>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etm0_out_port: endpoint {
+				remote-endpoint = <&ca_funnel_in_port0>;
+			};
+		};
+	};
+
+	etm@3007d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x3007d000 0x1000>;
+
+		/*
+		 * System will hang if added nosmp in kernel command line
+		 * without arm,primecell-periphid because amba bus try to
+		 * read id and core1 power off at this time.
+		 */
+		arm,primecell-periphid = <0xbb956>;
+		cpu = <&cpu1>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etm1_out_port: endpoint {
+				remote-endpoint = <&ca_funnel_in_port1>;
+			};
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -212,6 +415,37 @@
 				#interrupt-cells = <2>;
 			};
 
+			wdog1: wdog@30280000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+			};
+
+			wdog2: wdog@30290000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog3: wdog@302a0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog4: wdog@302b0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+				status = "disabled";
+			};
+
 			gpt1: gpt@302d0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302d0000 0x10000>;
@@ -291,17 +525,31 @@
 			};
 
 			snvs: snvs@30370000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x30370000 0x10000>;
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
 
-				snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
+					regmap = <&snvs>;
+					offset = <0x34>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
 			};
 
 			clks: ccm@30380000 {
diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts
new file mode 100644
index 000000000000..09eed3cea0af
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lswvl.dts
@@ -0,0 +1,301 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WVL/VL
+ *
+ * Copyright (C) 2015, rogershimizu@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WVL/VL";
+	compatible = "buffalo,lswvl", "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p40", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 45 GPIO_ACTIVE_LOW>;
+		};
+
+		button@2 {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+		};
+
+		button@3 {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 47 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+		pinctrl-names = "default";
+
+		led@1 {
+			label = "lswvl:red:alarm";
+			gpios = <&gpio0 36 GPIO_ACTIVE_LOW>;
+		};
+
+		led@2 {
+			label = "lswvl:red:func";
+			gpios = <&gpio0 37 GPIO_ACTIVE_LOW>;
+		};
+
+		led@3 {
+			label = "lswvl:amber:info";
+			gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
+		};
+
+		led@4 {
+			label = "lswvl:blue:func";
+			gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
+		};
+
+		led@5 {
+			label = "lswvl:blue:power";
+			gpios = <&gpio0 40 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		led@6 {
+			label = "lswvl:red:hdderr0";
+			gpios = <&gpio0 34 GPIO_ACTIVE_LOW>;
+		};
+
+		led@7 {
+			label = "lswvl:red:hdderr1";
+			gpios = <&gpio0 35 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		hdd_power0: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts
new file mode 100644
index 000000000000..f5db16a08597
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lswxl.dts
@@ -0,0 +1,301 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WXL/WSXL
+ *
+ * Copyright (C) 2015, rogershimizu@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WXL/WSXL";
+	compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p40", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio1 41 GPIO_ACTIVE_LOW>;
+		};
+
+		button@2 {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+			gpios = <&gpio1 42 GPIO_ACTIVE_LOW>;
+		};
+
+		button@3 {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio1 43 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+		pinctrl-names = "default";
+
+		led@1 {
+			label = "lswxl:blue:func";
+			gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
+		};
+
+		led@2 {
+			label = "lswxl:red:alarm";
+			gpios = <&gpio1 49 GPIO_ACTIVE_LOW>;
+		};
+
+		led@3 {
+			label = "lswxl:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led@4 {
+			label = "lswxl:blue:power";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led@5 {
+			label = "lswxl:red:func";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		led@6 {
+			label = "lswxl:red:hdderr0";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led@7 {
+			label = "lswxl:red:hdderr1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio0 47 GPIO_ACTIVE_LOW
+			 &gpio0 48 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>;
+		};
+		hdd_power0: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 204da5b52ef9..2c569a6ddc9a 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -13,6 +13,12 @@
 
 #include "armv7-m.dtsi"
 
+#include "dt-bindings/clock/lpc18xx-cgu.h"
+#include "dt-bindings/clock/lpc18xx-ccu.h"
+
+#define LPC_PIN(port, pin)	(0x##port * 32 + pin)
+#define LPC_GPIO(port, pin)	(port * 32 + pin)
+
 / {
 	cpus {
 		#address-cells = <1>;
@@ -22,6 +28,7 @@
 			compatible = "arm,cortex-m3";
 			device_type = "cpu";
 			reg = <0x0>;
+			clocks = <&ccu1 CLK_CPU_CORE>;
 		};
 	};
 
@@ -32,32 +39,173 @@
 			clock-frequency = <12000000>;
 		};
 
-		/* Temporary hardcode PLL1 until clk drivers are merged */
-		pll1: pll1 {
-			compatible = "fixed-factor-clock";
-			clocks = <&xtal>;
+		xtal32: xtal32 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		enet_rx_clk: enet_rx_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_rx_clk";
+		};
+
+		enet_tx_clk: enet_tx_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_tx_clk";
+		};
+
+		gp_clkin: gp_clkin {
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <12>;
+			clock-frequency = <0>;
+			clock-output-names = "gp_clkin";
 		};
 	};
 
 	soc {
+		mmcsd: mmcsd@40004000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x40004000 0x1000>;
+			interrupts = <6>;
+			num-slots = <1>;
+			clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
+			clock-names = "ciu", "biu";
+			status = "disabled";
+		};
+
+		usb0: ehci@40006100 {
+			compatible = "nxp,lpc1850-ehci", "generic-ehci";
+			reg = <0x40006100 0x100>;
+			interrupts = <8>;
+			clocks = <&ccu1 CLK_CPU_USB0>;
+			phys = <&usb0_otg_phy>;
+			phy-names = "usb";
+			has-transaction-translator;
+			status = "disabled";
+		};
+
+		usb1: ehci@40007100 {
+			compatible = "nxp,lpc1850-ehci", "generic-ehci";
+			reg = <0x40007100 0x100>;
+			interrupts = <9>;
+			clocks = <&ccu1 CLK_CPU_USB1>;
+			status = "disabled";
+		};
+
+		emc: memory-controller@40005000 {
+			compatible = "arm,pl172", "arm,primecell";
+			reg = <0x40005000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
+			clock-names = "mpmcclk", "apb_pclk";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x1c000000 0x1000000
+				  1 0 0x1d000000 0x1000000
+				  2 0 0x1e000000 0x1000000
+				  3 0 0x1f000000 0x1000000>;
+			status = "disabled";
+		};
+
+		lcdc: lcd-controller@40008000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x40008000 0x1000>;
+			interrupts = <7>;
+			interrupt-names = "combined";
+			clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		mac: ethernet@40010000 {
+			compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+			reg = <0x40010000 0x2000>;
+			interrupts = <5>;
+			interrupt-names	= "macirq";
+			clocks = <&ccu1 CLK_CPU_ETHERNET>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+		};
+
+		creg: syscon@40043000 {
+			compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+			reg = <0x40043000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_CREG>;
+
+			usb0_otg_phy: phy@004 {
+				compatible = "nxp,lpc1850-usb-otg-phy";
+				clocks = <&ccu1 CLK_USB0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		cgu: clock-controller@40050000 {
+			compatible = "nxp,lpc1850-cgu";
+			reg = <0x40050000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&xtal>, <&xtal32>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+		};
+
+		ccu1: clock-controller@40051000 {
+			compatible = "nxp,lpc1850-ccu";
+			reg = <0x40051000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&cgu BASE_APB3_CLK>,   <&cgu BASE_APB1_CLK>,
+				 <&cgu BASE_SPIFI_CLK>,  <&cgu BASE_CPU_CLK>,
+				 <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+				 <&cgu BASE_USB1_CLK>,   <&cgu BASE_SPI_CLK>;
+			clock-names = "base_apb3_clk",   "base_apb1_clk",
+				      "base_spifi_clk",  "base_cpu_clk",
+				      "base_periph_clk", "base_usb0_clk",
+				      "base_usb1_clk",   "base_spi_clk";
+		};
+
+		ccu2: clock-controller@40052000 {
+			compatible = "nxp,lpc1850-ccu";
+			reg = <0x40052000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+				 <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+				 <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+				 <&cgu BASE_SSP0_CLK>,  <&cgu BASE_SDIO_CLK>;
+			clock-names = "base_audio_clk", "base_uart3_clk",
+				      "base_uart2_clk", "base_uart1_clk",
+				      "base_uart0_clk", "base_ssp1_clk",
+				      "base_ssp0_clk",  "base_sdio_clk";
+		};
+
 		uart0: serial@40081000 {
-			compatible = "ns16550a";
+			compatible = "nxp,lpc1850-uart", "ns16550a";
 			reg = <0x40081000 0x1000>;
 			reg-shift = <2>;
 			interrupts = <24>;
-			clocks = <&pll1>;
+			clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+			clock-names = "uartclk", "reg";
 			status = "disabled";
 		};
 
 		uart1: serial@40082000 {
-			compatible = "ns16550a";
+			compatible = "nxp,lpc1850-uart", "ns16550a";
 			reg = <0x40082000 0x1000>;
 			reg-shift = <2>;
 			interrupts = <25>;
-			clocks = <&pll1>;
+			clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
+			clock-names = "uartclk", "reg";
+			status = "disabled";
+		};
+
+		ssp0: spi@40083000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x40083000 0x1000>;
+			interrupts = <22>;
+			clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
+			clock-names = "sspclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -65,7 +213,7 @@
 			compatible = "nxp,lpc3220-timer";
 			reg = <0x40084000 0x1000>;
 			interrupts = <12>;
-			clocks = <&pll1>;
+			clocks = <&ccu1 CLK_CPU_TIMER0>;
 			clock-names = "timerclk";
 		};
 
@@ -73,25 +221,41 @@
 			compatible = "nxp,lpc3220-timer";
 			reg = <0x40085000 0x1000>;
 			interrupts = <13>;
-			clocks = <&pll1>;
+			clocks = <&ccu1 CLK_CPU_TIMER1>;
 			clock-names = "timerclk";
 		};
 
+		pinctrl: pinctrl@40086000 {
+			compatible = "nxp,lpc1850-scu";
+			reg = <0x40086000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_SCU>;
+		};
+
+		can1: can@400a4000 {
+			compatible = "bosch,c_can";
+			reg = <0x400a4000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu1 CLK_APB1_CAN1>;
+			status = "disabled";
+		};
+
 		uart2: serial@400c1000 {
-			compatible = "ns16550a";
+			compatible = "nxp,lpc1850-uart", "ns16550a";
 			reg = <0x400c1000 0x1000>;
 			reg-shift = <2>;
 			interrupts = <26>;
-			clocks = <&pll1>;
+			clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
+			clock-names = "uartclk", "reg";
 			status = "disabled";
 		};
 
 		uart3: serial@400c2000 {
-			compatible = "ns16550a";
+			compatible = "nxp,lpc1850-uart", "ns16550a";
 			reg = <0x400c2000 0x1000>;
 			reg-shift = <2>;
 			interrupts = <27>;
-			clocks = <&pll1>;
+			clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
+			clock-names = "uartclk", "reg";
 			status = "disabled";
 		};
 
@@ -99,7 +263,7 @@
 			compatible = "nxp,lpc3220-timer";
 			reg = <0x400c3000 0x1000>;
 			interrupts = <14>;
-			clocks = <&pll1>;
+			clocks = <&ccu1 CLK_CPU_TIMER2>;
 			clock-names = "timerclk";
 		};
 
@@ -107,8 +271,75 @@
 			compatible = "nxp,lpc3220-timer";
 			reg = <0x400c4000 0x1000>;
 			interrupts = <15>;
-			clocks = <&pll1>;
+			clocks = <&ccu1 CLK_CPU_TIMER3>;
 			clock-names = "timerclk";
 		};
+
+		ssp1: spi@400c5000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x400c5000 0x1000>;
+			interrupts = <23>;
+			clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
+			clock-names = "sspclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@400e2000 {
+			compatible = "bosch,c_can";
+			reg = <0x400e2000 0x1000>;
+			interrupts = <51>;
+			clocks = <&ccu1 CLK_APB3_CAN0>;
+			status = "disabled";
+		};
+
+		gpio: gpio@400f4000 {
+			compatible = "nxp,lpc1850-gpio";
+			reg = <0x400f4000 0x4000>;
+			clocks = <&ccu1 CLK_CPU_GPIO>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges =	<&pinctrl LPC_GPIO(0,0)  LPC_PIN(0,0)  2>,
+					<&pinctrl LPC_GPIO(0,4)  LPC_PIN(1,0)  1>,
+					<&pinctrl LPC_GPIO(0,8)  LPC_PIN(1,1)  4>,
+					<&pinctrl LPC_GPIO(1,8)  LPC_PIN(1,5)  2>,
+					<&pinctrl LPC_GPIO(1,0)  LPC_PIN(1,7)  8>,
+					<&pinctrl LPC_GPIO(0,2)  LPC_PIN(1,15) 2>,
+					<&pinctrl LPC_GPIO(0,12) LPC_PIN(1,17) 2>,
+					<&pinctrl LPC_GPIO(0,15) LPC_PIN(1,20) 1>,
+					<&pinctrl LPC_GPIO(5,0)  LPC_PIN(2,0)  7>,
+					<&pinctrl LPC_GPIO(0,7)  LPC_PIN(2,7)  1>,
+					<&pinctrl LPC_GPIO(5,7)  LPC_PIN(2,8)  1>,
+					<&pinctrl LPC_GPIO(1,10) LPC_PIN(2,9)  1>,
+					<&pinctrl LPC_GPIO(0,14) LPC_PIN(2,10) 1>,
+					<&pinctrl LPC_GPIO(1,11) LPC_PIN(2,11) 3>,
+					<&pinctrl LPC_GPIO(5,8)  LPC_PIN(3,1)  2>,
+					<&pinctrl LPC_GPIO(1,14) LPC_PIN(3,4)  2>,
+					<&pinctrl LPC_GPIO(0,6)  LPC_PIN(3,6)  1>,
+					<&pinctrl LPC_GPIO(5,10) LPC_PIN(3,7)  2>,
+					<&pinctrl LPC_GPIO(2,0)  LPC_PIN(4,0)  7>,
+					<&pinctrl LPC_GPIO(5,12) LPC_PIN(4,8)  3>,
+					<&pinctrl LPC_GPIO(2,9)  LPC_PIN(5,0)  7>,
+					<&pinctrl LPC_GPIO(2,7)  LPC_PIN(5,7)  1>,
+					<&pinctrl LPC_GPIO(3,0)  LPC_PIN(6,1)  5>,
+					<&pinctrl LPC_GPIO(0,5)  LPC_PIN(6,6)  1>,
+					<&pinctrl LPC_GPIO(5,15) LPC_PIN(6,7)  2>,
+					<&pinctrl LPC_GPIO(3,5)  LPC_PIN(6,9)  3>,
+					<&pinctrl LPC_GPIO(2,8)  LPC_PIN(6,12) 1>,
+					<&pinctrl LPC_GPIO(3,8)  LPC_PIN(7,0)  8>,
+					<&pinctrl LPC_GPIO(4,0)  LPC_PIN(8,0)  8>,
+					<&pinctrl LPC_GPIO(4,12) LPC_PIN(9,0)  4>,
+					<&pinctrl LPC_GPIO(5,17) LPC_PIN(9,4)  2>,
+					<&pinctrl LPC_GPIO(4,11) LPC_PIN(9,6)  1>,
+					<&pinctrl LPC_GPIO(4,8)  LPC_PIN(a,1)  3>,
+					<&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4)  1>,
+					<&pinctrl LPC_GPIO(5,20) LPC_PIN(b,0)  7>,
+					<&pinctrl LPC_GPIO(6,0)  LPC_PIN(c,1) 14>,
+					<&pinctrl LPC_GPIO(6,14) LPC_PIN(d,0) 17>,
+					<&pinctrl LPC_GPIO(7,0)  LPC_PIN(e,0) 16>,
+					<&pinctrl LPC_GPIO(7,16) LPC_PIN(f,1)  3>,
+					<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5)  7>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts
new file mode 100644
index 000000000000..5f500c1ad89c
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4337-ciaa.dts
@@ -0,0 +1,187 @@
+/*
+ * CIAA NXP LPC4337 (http://www.proyecto-ciaa.com.ar)
+ *
+ * Copyright (C) 2015 VanguardiaSur - www.vanguardiasur.com.ar
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+	model = "CIAA NXP LPC4337";
+	compatible = "ciaa,lpc4337", "nxp,lpc4337", "nxp,lpc4350";
+
+	aliases {
+		serial0 = &uart2;
+		serial1 = &uart3;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x28000000 0x0800000>; /* 8 MB */
+	};
+};
+
+&pinctrl {
+	enet_rmii_pins: enet-rmii-pins {
+		enet_rmii_rxd_cfg {
+			pins = "p1_15", "p0_0";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_txd_cfg {
+			pins = "p1_18", "p1_20";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_rx_dv_cfg {
+			pins = "p1_16";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_tx_en_cfg {
+			pins = "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_ref_clk_cfg {
+			pins = "p1_19";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdc_cfg {
+			pins = "p7_7";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	ssp_pins: ssp-pins {
+		ssp1_cs {
+			pins = "p6_7";
+			function = "gpio";
+			bias-pull-up;
+			bias-disable;
+		};
+
+		ssp1_miso_mosi {
+			pins = "p1_3", "p1_4";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-pull-down;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		ssp1_sck {
+			pins = "pf_4";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-disable;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		uart2_rx_cfg {
+			pins = "p7_2";
+			function = "uart2";
+			bias-disable;
+			input-enable;
+		};
+
+		uart2_tx_cfg {
+			pins = "p7_1";
+			function = "uart2";
+			bias-disable;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		uart3_rx_cfg {
+			pins = "p2_4";
+			function = "uart3";
+			bias-disable;
+			input-enable;
+		};
+
+		uart3_tx_cfg {
+			pins = "p2_3";
+			function = "uart3";
+			bias-disable;
+		};
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <50000000>;
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&ssp1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp_pins>;
+	cs-gpios = <&gpio LPC_GPIO(5,15) GPIO_ACTIVE_HIGH>;
+	num-cs = <1>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index d04072f40817..32bc7ff4eb2a 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -36,10 +36,250 @@
 	};
 };
 
-&pll1 {
-	clock-mult = <15>;
+&pinctrl {
+	emc_pins: emc-pins {
+		emc_addr0_23_cfg {
+			pins =	"p2_9",  "p2_10", "p2_11", "p2_12",
+				"p2_13", "p1_0",  "p1_1",  "p1_2",
+				"p2_8",  "p2_7",  "p2_6",  "p2_2",
+				"p2_1",  "p2_0",  "p6_8",  "p6_7",
+				"pd_16", "pd_15", "pe_0",  "pe_1",
+				"pe_2",  "pe_3",  "pe_4",  "pa_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_data0_15_cfg {
+			pins =	"p1_7",  "p1_8",  "p1_9",  "p1_10",
+				"p1_11", "p1_12", "p1_13", "p1_14",
+				"p5_4",  "p5_5",  "p5_6",  "p5_7",
+				"p5_0",  "p5_1",  "p5_2",  "p5_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_we_oe_cfg {
+			pins = "p1_6", "p1_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_bls0_3_cfg {
+			pins = "p1_4", "p6_6", "pd_13", "pd_10";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_cs0_cs2_cfg {
+			pins = "p1_5", "pd_12";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dqm0_3_cfg {
+			pins = "p6_12", "p6_10", "pd_0", "pe_13";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_ras_cas_cfg {
+			pins = "p6_5", "p6_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dycs0_cfg {
+			pins = "p6_9";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_cke_cfg {
+			pins = "p6_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_clock_cfg {
+			pins = "clk0", "clk1", "clk2", "clk3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	enet_mii_pins: enet-mii-pins {
+		enet_mii_rxd0_3_cfg {
+			pins = "p1_15", "p0_0", "p9_3", "p9_2";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_txd0_3_cfg {
+			pins = "p1_18", "p1_20", "p9_4", "p9_5";
+			function = "enet";
+			bias-disable;
+		};
+
+		enet_mii_crs_col_cfg {
+			pins = "p9_0", "p9_6";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_rx_clk_dv_er_cfg {
+			pins = "pc_0", "p1_16", "p9_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_tx_clk_en_cfg {
+			pins = "p1_19", "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mdc_cfg {
+			pins = "pc_1";
+			function = "enet";
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rx_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart0_tx_cfg {
+			pins = "pf_10";
+			function = "uart0";
+			bias-pull-down;
+		};
+	};
+};
+
+&emc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emc_pins>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-access-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		flash@0,0 {
+			compatible = "sst,sst39vf320", "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x000000 0x040000>; /* 256 KiB */
+			};
+
+			partition@1 {
+				label = "kernel";
+				reg = <0x040000 0x2C0000>; /* 2.75 MiB */
+			};
+
+			partition@2 {
+				label = "rootfs";
+				reg = <0x300000 0x100000>; /* 1 MiB */
+			};
+		};
+	};
+
+	cs2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <2>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <30>;
+		mpmc,read-access-delay = <90>;
+		mpmc,page-mode-read-delay = <55>;
+		mpmc,write-access-delay = <55>;
+		mpmc,turn-round-delay = <55>;
+
+		ext_sram: sram@2,0 {
+			compatible = "mmio-sram";
+			reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
+		};
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <25000000>;
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "mii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_mii_pins>;
 };
 
 &uart0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
 };
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 08a6f757f924..5f7bdad80963 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -15,6 +15,9 @@
 #include "lpc18xx.dtsi"
 #include "lpc4357.dtsi"
 
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
 / {
 	model = "Embedded Artists' LPC4357 Developer's Kit";
 	compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350";
@@ -34,8 +37,472 @@
 		device_type = "memory";
 		reg = <0x28000000 0x2000000>; /* 32 MB */
 	};
+
+	/* vmmc is controlled by sdmmc host internally */
+	vmmc: vmmc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	gpio_joystick {
+		compatible = "gpio-keys-polled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_joystick_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		autorepeat;
+
+		button@0 {
+			label = "joy_enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
+		};
+
+		button@1 {
+			label = "joy_left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
+		};
+
+		button@2 {
+			label = "joy_up";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
+		};
+
+		button@3 {
+			label = "joy_right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
+		};
+
+		button@4 {
+			label = "joy_down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds_mmio {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&mmio_leds 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			gpios = <&mmio_leds 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			gpios = <&mmio_leds 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4 {
+			gpios = <&mmio_leds 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5 {
+			gpios = <&mmio_leds 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led6 {
+			gpios = <&mmio_leds 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led7 {
+			gpios = <&mmio_leds 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led8 {
+			gpios = <&mmio_leds 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led9 {
+			gpios = <&mmio_leds 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led10 {
+			gpios = <&mmio_leds 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led11 {
+			gpios = <&mmio_leds 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led12 {
+			gpios = <&mmio_leds 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led13 {
+			gpios = <&mmio_leds 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led14 {
+			gpios = <&mmio_leds 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led15 {
+			gpios = <&mmio_leds 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led16 {
+			gpios = <&mmio_leds 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	emc_pins: emc-pins {
+		emc_addr0_23_cfg {
+			pins =	"p2_9",  "p2_10", "p2_11", "p2_12",
+				"p2_13", "p1_0",  "p1_1",  "p1_2",
+				"p2_8",  "p2_7",  "p2_6",  "p2_2",
+				"p2_1",  "p2_0",  "p6_8",  "p6_7",
+				"pd_16", "pd_15", "pe_0",  "pe_1",
+				"pe_2",  "pe_3",  "pe_4",  "pa_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_data0_31_cfg {
+			pins =	"p1_7",  "p1_8",  "p1_9",  "p1_10",
+				"p1_11", "p1_12", "p1_13", "p1_14",
+				"p5_4",  "p5_5",  "p5_6",  "p5_7",
+				"p5_0",  "p5_1",  "p5_2",  "p5_3",
+				"pd_2",  "pd_3",  "pd_4",  "pd_5",
+				"pd_6",  "pd_7",  "pd_8",  "pd_9",
+				"pe_5",  "pe_6",  "pe_7",  "pe_8",
+				"pe_9",  "pe_10", "pe_11", "pe_12";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_we_oe_cfg {
+			pins = "p1_6", "p1_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_bls0_3_cfg {
+			pins = "p1_4", "p6_6", "pd_13", "pd_10";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_cs0_3_cfg {
+			pins = "p1_5", "p6_3", "pd_12", "pd_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dqm0_3_cfg {
+			pins = "p6_12", "p6_10", "pd_0", "pe_13";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_ras_cas_cfg {
+			pins = "p6_5", "p6_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dycs0_cfg {
+			pins = "p6_9";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_cke_cfg {
+			pins = "p6_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_clock_cfg {
+			pins = "clk0", "clk1", "clk2", "clk3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	enet_rmii_pins: enet-rmii-pins {
+		enet_rmii_rxd_cfg {
+			pins = "p1_15", "p0_0";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_txd_cfg {
+			pins = "p1_18", "p1_20";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_rx_dv_cfg {
+			pins = "p1_16";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_tx_en_cfg {
+			pins = "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_ref_clk_cfg {
+			pins = "p1_19";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdc_cfg {
+			pins = "pc_1";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	gpio_joystick_pins: gpio-joystick-pins {
+		gpio_joystick_cfg {
+			pins =	"p9_0", "p9_1", "pa_1", "pa_2", "pa_3";
+			function = "gpio";
+			input-enable;
+			bias-disable;
+		};
+	};
+
+	sdmmc_pins: sdmmc-pins {
+		sdmmc_clk_cfg {
+			pins = "pc_0";
+			function = "sdmmc";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		sdmmc_cmd_dat0_3_cfg {
+			pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+			function = "sdmmc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		sdmmc_cd_cfg {
+			pins = "pc_8";
+			function = "sdmmc";
+			bias-pull-down;
+			input-enable;
+		};
+
+		sdmmc_pow_cfg {
+			pins = "pc_9";
+			function = "sdmmc";
+			bias-pull-down;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rx_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart0_tx_cfg {
+			pins = "pf_10";
+			function = "uart0";
+			bias-pull-down;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		uart3_rx_cfg {
+			pins = "p2_4";
+			function = "uart3";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart3_tx_cfg {
+			pins = "p9_3";
+			function = "uart3";
+			bias-pull-down;
+		};
+	};
+
+	usb0_pins: usb0-pins {
+		usb0_pwr_enable {
+			pins = "p2_3";
+			function = "usb0";
+		};
+
+		usb0_pwr_fault {
+			pins = "p8_0";
+			function = "usb0";
+			bias-disable;
+			input-enable;
+		};
+	};
+};
+
+&emc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emc_pins>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-access-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		flash@0,0 {
+			compatible = "sst,sst39vf320", "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x000000 0x040000>; /* 256 KiB */
+			};
+
+			partition@1 {
+				label = "kernel";
+				reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+			};
+
+			partition@2 {
+				label = "rootfs";
+				reg = <0x300000 0x100000>; /* 1 MiB */
+			};
+		};
+	};
+
+	cs2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <2>;
+		mpmc,memory-width = <16>;
+
+		mmio_leds: gpio@2,0 {
+			compatible = "ti,7416374";
+			reg = <2 0 0x2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <50000000>;
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&mmcsd {
+	status = "okay";
+	bus-width = <4>;
+	vmmc-supply = <&vmmc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_pins>;
 };
 
 &uart0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
 };
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 9c5e16ba8c95..0521e6864cb7 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -58,6 +58,55 @@
 		enet0_sgmii_phy = &sgmii_phy1c;
 		enet1_sgmii_phy = &sgmii_phy1d;
 	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
 };
 
 &dspi0 {
@@ -75,10 +124,31 @@
 	};
 };
 
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1c>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1d>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy3>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
 	pca9547: mux@77 {
+		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -133,6 +203,21 @@
 				reg = <0x4c>;
 			};
 		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			codec: sgtl5000@2a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0x2a>;
+				VDDA-supply = <&reg_3p3v>;
+				VDDIO-supply = <&reg_3p3v>;
+				clocks = <&sys_mclk 1>;
+			};
+		};
 	};
 };
 
@@ -231,6 +316,10 @@
 	};
 };
 
+&sai2 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index a2c591e2d918..e008f9367510 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -56,6 +56,55 @@
 		enet0_sgmii_phy = &sgmii_phy2;
 		enet1_sgmii_phy = &sgmii_phy0;
 	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
 };
 
 &dspi1 {
@@ -73,12 +122,40 @@
 	};
 };
 
+&enet0 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy2>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 };
 
 &i2c1 {
 	status = "okay";
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&sys_mclk 1>;
+	};
 };
 
 &ifc {
@@ -118,6 +195,10 @@
 	};
 };
 
+&sai1 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27ac65a..973a496207fc 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -53,6 +53,9 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
 		serial0 = &lpuart0;
 		serial1 = &lpuart1;
 		serial2 = &lpuart2;
@@ -184,7 +187,7 @@
 		};
 
 		dspi0: dspi@2100000 {
-			compatible = "fsl,vf610-dspi";
+			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
@@ -197,7 +200,7 @@
 		};
 
 		dspi1: dspi@2110000 {
-			compatible = "fsl,vf610-dspi";
+			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2110000 0x0 0x10000>;
@@ -342,28 +345,30 @@
 		};
 
 		sai1: sai@2b50000 {
+			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b50000 0x0 0x10000>;
 			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&platform_clk 1>;
-			clock-names = "sai";
+			clocks = <&platform_clk 1>, <&platform_clk 1>,
+				 <&platform_clk 1>, <&platform_clk 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 47>,
 			       <&edma0 1 46>;
-			big-endian;
 			status = "disabled";
 		};
 
 		sai2: sai@2b60000 {
+			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b60000 0x0 0x10000>;
 			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&platform_clk 1>;
-			clock-names = "sai";
+			clocks = <&platform_clk 1>, <&platform_clk 1>,
+				 <&platform_clk 1>, <&platform_clk 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 45>,
 			       <&edma0 1 44>;
-			big-endian;
 			status = "disabled";
 		};
 
@@ -391,6 +396,91 @@
 			reg = <0x0 0x2d24000 0x0 0x4000>;
 		};
 
+		enet0: ethernet@2d10000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			fsl,magic-packet;
+			ranges;
+
+			queue-group@2d10000 {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d10000 0x0 0x1000>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d14000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d14000 0x0 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		enet1: ethernet@2d50000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			ranges;
+
+			queue-group@2d50000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d50000 0x0 0x1000>;
+				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d54000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d54000 0x0 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		enet2: ethernet@2d90000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			ranges;
+
+			queue-group@2d90000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d90000 0x0 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d94000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d94000 0x0 0x1000>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		usb@8600000 {
 			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			reg = <0x0 0x8600000 0x0 0x1000>;
diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mt6580-evbp1.dts
new file mode 100644
index 000000000000..17daeae6bbe8
--- /dev/null
+++ b/arch/arm/boot/dts/mt6580-evbp1.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6580.dtsi"
+
+/ {
+	model = "MediaTek MT6580 evaluation board";
+	compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi
new file mode 100644
index 000000000000..06fdf6c2d5fd
--- /dev/null
+++ b/arch/arm/boot/dts/mt6580.dtsi
@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "mediatek,mt6580";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt6580-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt6580-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200100 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x1000>,
+		      <0x10214000 0x2000>,
+		      <0x10216000 0x2000>;
+	};
+
+	uart0: serial@11005000 {
+		compatible = "mediatek,mt6580-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11006000 {
+		compatible = "mediatek,mt6580-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11006000 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts
index 36677382bdd8..357a91fc2d1d 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mt8135-evbp1.dts
@@ -24,6 +24,199 @@
 	};
 };
 
+&pwrap {
+	pmic: mt6397 {
+		compatible = "mediatek,mt6397";
+
+		mt6397regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-compatible = "buck_vpca15";
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-compatible = "buck_vpca7";
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-compatible = "buck_vsramca15";
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-compatible = "buck_vsramca7";
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-compatible = "buck_vcore";
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-compatible = "buck_vgpu";
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-compatible = "buck_vdrm";
+				regulator-name = "vdrm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-compatible = "buck_vio18";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-compatible = "ldo_vtcxo";
+				regulator-name = "vtcxo";
+				regulator-always-on;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-compatible = "ldo_va28";
+				regulator-name = "va28";
+				regulator-always-on;
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-compatible = "ldo_vcama";
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-compatible = "ldo_vio28";
+				regulator-name = "vio28";
+				regulator-always-on;
+			};
+
+			mt6397_vusb_reg: ldo_vusb {
+				regulator-compatible = "ldo_vusb";
+				regulator-name = "vusb";
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-compatible = "ldo_vmc";
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-compatible = "ldo_vmch";
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-compatible = "ldo_vemc3v3";
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-compatible = "ldo_vgp1";
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1220000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				regulator-compatible = "ldo_vgp2";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-compatible = "ldo_vgp3";
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-compatible = "ldo_vgp4";
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-compatible = "ldo_vgp5";
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-compatible = "ldo_vgp6";
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-compatible = "ldo_vibr";
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+	};
+};
+
 &uart3 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 0aba9eb28e2b..08371dbae543 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -12,8 +12,10 @@
  * GNU General Public License for more details.
  */
 
+#include <dt-bindings/clock/mt8135-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/mt8135-resets.h>
 #include "skeleton64.dtsi"
 #include "mt8135-pinfunc.h"
 
@@ -88,12 +90,11 @@
 			#clock-cells = <0>;
 		};
 
-		uart_clk: dummy26m {
+		clk26m: clk26m {
 			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
 			#clock-cells = <0>;
+			clock-frequency = <26000000>;
 		};
-
 	};
 
 	soc {
@@ -102,6 +103,26 @@
 		compatible = "simple-bus";
 		ranges;
 
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8135-topckgen";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+		};
+
+		pericfg: pericfg@10003000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+		};
+
 		/*
 		 * Pinctrl access register at 0x10005000 and 0x1020c000 through
 		 * regmap. Register 0x1000b000 is used by EINT.
@@ -134,6 +155,19 @@
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8135-pwrap";
+			reg = <0 0x1000f000 0 0x1000>,
+				<0 0x11017000 0 0x1000>;
+			reg-names = "pwrap", "pwrap-bridge";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+					<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+			reset-names = "pwrap", "pwrap-bridge";
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "spi", "wrap";
+		};
+
 		sysirq: interrupt-controller@10200030 {
 			compatible = "mediatek,mt8135-sysirq",
 				     "mediatek,mt6577-sysirq";
@@ -143,6 +177,12 @@
 			reg = <0 0x10200030 0 0x1c>;
 		};
 
+		apmixedsys: apmixedsys@10209000 {
+			compatible = "mediatek,mt8135-apmixedsys";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		syscfg_pctl_b: syscfg_pctl_b@1020c000 {
 			compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
 			reg = <0 0x1020c000 0 0x1000>;
@@ -163,7 +203,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11006000 0 0x400>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -171,7 +212,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11007000 0 0x400>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -179,7 +221,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11008000 0 0x400>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -187,7 +230,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11009000 0 0x400>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
new file mode 100644
index 000000000000..9ca2865a83d6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -0,0 +1,369 @@
+/*
+ * Author: Anil Kumar <anilk4.v@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+#include "omap34xx.dtsi"
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "devkit8000::led1";
+			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "devkit8000::led2";
+			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
+			default-state = "on";
+			linux,default-trigger = "none";
+		};
+
+		usr {
+			label = "devkit8000::led3";
+			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
+			default-state = "on";
+			linux,default-trigger = "usr";
+		};
+
+		pmu_stat {
+			label = "devkit8000::pmu_stat";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "devkit8000";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,audio-routing =
+			"Ext Spk", "PREDRIVEL",
+			"Ext Spk", "PREDRIVER",
+			"MAINMIC", "Main Mic",
+			"Main Mic", "Mic Bias 1";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			linux,code = <BTN_EXTRA>;
+			gpio-key,wakeup;
+		};
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_dvi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c2>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector@1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>;	/* SYS_NIRQ cascaded to intc */
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/*
+	 * pulldowns:
+	 * BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c6>;
+};
+
+&twl_keypad {
+	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
+			MATRIX_KEY(1, 0, KEY_2)
+			MATRIX_KEY(2, 0, KEY_3)
+			MATRIX_KEY(0, 1, KEY_4)
+			MATRIX_KEY(1, 1, KEY_5)
+			MATRIX_KEY(2, 1, KEY_6)
+			MATRIX_KEY(3, 1, KEY_F5)
+			MATRIX_KEY(0, 2, KEY_7)
+			MATRIX_KEY(1, 2, KEY_8)
+			MATRIX_KEY(2, 2, KEY_9)
+			MATRIX_KEY(3, 2, KEY_F6)
+			MATRIX_KEY(0, 3, KEY_F7)
+			MATRIX_KEY(1, 3, KEY_0)
+			MATRIX_KEY(2, 3, KEY_F8)
+			MATRIX_KEY(4, 5, KEY_RESERVED)
+			MATRIX_KEY(4, 4, KEY_VOLUMEUP)
+			MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)
+			>;
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>;       /* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "sw";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "U-Boot Env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x400000>;
+		};
+
+		filesystem@680000 {
+			label = "File System";
+			reg = <0x680000 0xf980000>;
+		};
+	};
+};
+
+&gpmc {
+	ranges = <6 0 0x2c000000 0x1000000>;       /* CS6: 16MB for DM9000 */
+
+	ethernet@0,0 {
+		compatible = "davicom,dm9000";
+		reg =  <6 0x000 2
+			6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
+		bank-width = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+		davicom,no-eeprom;
+
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <1>;
+		gpmc,wait-pin = <0>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+
+		gpmc,cs-on-ns = <6>;
+		gpmc,cs-rd-off-ns = <180>;
+		gpmc,cs-wr-off-ns = <180>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <18>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <144>;
+		gpmc,page-burst-access-ns = <24>;
+		gpmc,bus-turnaround-ns = <90>;
+		gpmc,cycle2cycle-delay-ns = <90>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+	};
+};
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+};
+
+&vpll1 {
+	/* Needed for DSS */
+	regulator-name = "vdds_dsi";
+
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	vdds_dsi-supply = <&vpll1>;
+	vdda_dac-supply = <&vdac>;
+
+	port {
+		dpi_dvi_out: endpoint@0 {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
new file mode 100644
index 000000000000..e84184de2a4a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-devkit8000-common.dtsi"
+/ {
+	aliases {
+		display0 = &lcd0;
+		display1 = &dvi0;
+		display2 = &tv0;
+	};
+
+	lcd0: display@0 {
+		compatible = "panel-dpi";
+		label = "lcd";
+
+		enable-gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_lcd_out>;
+			};
+		};
+	};
+};
+
+&dss {
+	port {
+		dpi_lcd_out: endpoint@1 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&vio {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&mcspi2 {
+
+	/* touch controller */
+	ads7846@0 {
+		compatible = "ti,ads7846";
+		vcc-supply = <&vio>;
+
+		reg = <0>;			/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <27 0>;		/* gpio_27 */
+		pendown-gpio = <&gpio1 27 0>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,debounce-max = /bits/ 16 <10>;
+		ti,debounce-tol = /bits/ 16 <5>;
+		ti,debounce-rep = /bits/ 16 <1>;
+		ti,keep-vref-on = <1>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+
+		linux,wakeup;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
new file mode 100644
index 000000000000..d5705356d52c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
@@ -0,0 +1,37 @@
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/*
+ * 4.3'' LCD panel sold with devkit8000 board
+ */
+
+#include "omap3-devkit8000-lcd-common.dtsi"
+/ {
+	model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
+	compatible = "timll,omap3-devkit8000", "ti,omap3";
+
+	lcd0: display@0 {
+		panel-timing {
+			clock-frequency = <10164705>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <2>;
+			hback-porch = <2>;
+			hsync-len = <41>;
+			vback-porch = <2>;
+			vfront-porch = <2>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
new file mode 100644
index 000000000000..4afad4b233ec
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
@@ -0,0 +1,37 @@
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/*
+ * 7.0'' LCD panel sold with some devkit8000 board
+ */
+
+#include "omap3-devkit8000-lcd-common.dtsi"
+/ {
+	model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
+	compatible = "timll,omap3-devkit8000", "ti,omap3";
+
+	lcd0: display@0 {
+		panel-timing {
+			clock-frequency = <40000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <1>;
+			hback-porch = <1>;
+			hsync-len = <48>;
+			vback-porch = <25>;
+			vfront-porch = <12>;
+			vsync-len = <3>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index be2297116a14..40ac89482f5d 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -1,5 +1,5 @@
 /*
- * Author: Anil Kumar <anilk4.v@gmail.com>
+ * Author: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -7,194 +7,13 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "omap3-devkit8000-common.dtsi"
 / {
 	model = "TimLL OMAP3 Devkit8000";
 	compatible = "timll,omap3-devkit8000", "ti,omap3";
 
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			label = "devkit8000::led1";
-			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		mmc {
-			label = "devkit8000::led2";
-			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
-			default-state = "on";
-			linux,default-trigger = "none";
-		};
-
-		usr {
-			label = "devkit8000::led3";
-			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
-			default-state = "on";
-			linux,default-trigger = "usr";
-                };
-
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "devkit8000";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,audio-routing =
-			"Ext Spk", "PREDRIVEL",
-			"Ext Spk", "PREDRIVER",
-			"MAINMIC", "Main Mic",
-			"Main Mic", "Mic Bias 1";
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>;	/* SYS_NIRQ cascaded to intc */
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-&i2c2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	status = "disabled";
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&wdt2 {
-	status = "disabled";
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>;       /* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		ti,nand-ecc-opt = "sw";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		x-loader@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		bootloaders_env@260000 {
-			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
-		};
-
-		kernel@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x400000>;
-		};
-
-		filesystem@680000 {
-			label = "File System";
-			reg = <0x680000 0xf980000>;
-		};
-	};
-};
-
-&gpmc {
-	ranges = <6 0 0x2c000000 0x1000000>;       /* CS6: 16MB for DM9000 */
-
-	ethernet@0,0 {
-		compatible = "davicom,dm9000";
-		reg =  <6 0x000 2
-			6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
-		bank-width = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
-		davicom,no-eeprom;
-
-		gpmc,mux-add-data = <0>;
-		gpmc,device-width = <1>;
-		gpmc,wait-pin = <0>;
-		gpmc,cycle2cycle-samecsen = <1>;
-		gpmc,cycle2cycle-diffcsen = <1>;
-
-		gpmc,cs-on-ns = <6>;
-		gpmc,cs-rd-off-ns = <180>;
-		gpmc,cs-wr-off-ns = <180>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <144>;
-		gpmc,page-burst-access-ns = <24>;
-		gpmc,bus-turnaround-ns = <90>;
-		gpmc,cycle2cycle-delay-ns = <90>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,wr-access-ns = <0>;
+	aliases {
+		display1 = &dvi0;
+		display2 = &tv0;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index e63133304a34..d0dd0365bfda 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -319,12 +319,12 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsc2048_pins>;
 
-		ti,x-min = <300>;
-		ti,x-max = <3000>;
-		ti,y-min = <600>;
-		ti,y-max = <3600>;
-		ti,x-plate-ohms = <80>;
-		ti,pressure-max = <255>;
+		ti,x-min = /bits/ 16 <300>;
+		ti,x-max = /bits/ 16 <3000>;
+		ti,y-min = /bits/ 16 <600>;
+		ti,y-max = /bits/ 16 <3600>;
+		ti,x-plate-ohms = /bits/ 16 <80>;
+		ti,pressure-max = /bits/ 16 <255>;
 		ti,swap-xy;
 
 		linux,wakeup;
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index 18e1649681c1..28430f1596f2 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -218,3 +218,58 @@
 	pinctrl-0 = <&uart2_pins>;
 };
 
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x20000000>;
+
+	nand@0,0 {
+		linux,mtd-name= "micron,mt29c4g96maz";
+		reg = <0 0 0>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0 0x80000>; /* 512KiB */
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1C0000>; /* 1792KiB */
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>; /* 256KiB */
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x800000>; /* 8192KiB */
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0xA80000 0>;
+			/* HACK: MTDPART_SIZ_FULL=0 so fill to end */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index df8908adb0cb..80d236ac64a5 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -62,6 +62,7 @@
 			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
 			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
 			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs1.mcspi1_cs1 */
 		>;
 	};
 
@@ -123,7 +124,7 @@
 		label = "lcd35";
 
 		reg = <1>;					/* CS1 */
-		spi-max-frequency = <10000000>;
+		spi-max-frequency = <500000>;
 		spi-cpol;
 		spi-cpha;
 
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
new file mode 100644
index 000000000000..680d7262399c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			gpio-key,wakeup;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35.dts b/arch/arm/boot/dts/omap3-overo-palo35.dts
new file mode 100644
index 000000000000..e3e2bce6edbb
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo35.dts
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Palo35";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
new file mode 100644
index 000000000000..4e725d2d0038
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
new file mode 100644
index 000000000000..da6afafcc6c1
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
new file mode 100644
index 000000000000..334109e14613
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+	ranges = <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
+
+	smsc1: ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
+	};
+
+	smsc2: ethernet@4,0 {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <42>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <42>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <36>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <54>;
+		gpmc,access-ns = <36>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <18>;
+		gpmc,wr-access-ns = <42>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+
+		reg = <4 0 0xff>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 65 */
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-tobiduo.dts
new file mode 100644
index 000000000000..b9ce310f6e82
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on TobiDuo";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 69ca7c45bca2..932a02ff552a 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -32,7 +32,3 @@
 		>;
 	};
 };
-
-&mcbsp2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
index 9619a28dfd7d..25498f756a29 100644
--- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts
+++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
@@ -19,7 +19,7 @@
 / {
 	model = "Pandora Handheld Console 1GHz";
 
-	compatible = "ti,omap36xx", "ti,omap3";
+	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap36xx", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
index fb803a70a2bb..8775897a4ce7 100644
--- a/arch/arm/boot/dts/omap3-pandora-600mhz.dts
+++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
@@ -19,7 +19,7 @@
 / {
 	model = "Pandora Handheld Console";
 
-	compatible = "ti,omap3";
+	compatible = "openpandora,omap3-pandora-600mhz", "ti,omap3430", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 782ab1ff1d08..f2084e6d01e7 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -199,6 +199,38 @@
 			gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;   /* GPIO_108 */
 		};
 	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
+		vcc-supply = <&vaux2>;
+	};
+
+	/* HS USB Host VBUS supply
+	 * disabling this regulator causes current leakage, and LCD flicker
+	 * on earlier (CC) board revisions, so keep it always on */
+	usb_host_5v: fixed-regulator-usb_host_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio6 4 0>;	/* GPIO_164 */
+	};
+
+	/* wg7210 (wifi+bt module) 32k clock buffer */
+	wg7210_32k: fixed-regulator-wg7210_32k {
+		compatible = "regulator-fixed";
+		regulator-name = "wg7210_32k";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &omap3_pmx_core {
@@ -459,13 +491,18 @@
 	power = <50>;
 };
 
+/*
+ * Many pandora boards have been produced with defective write-protect switches
+ * on either slot, so it was decided not to use this feature. If you know
+ * your board has good switches, feel free to uncomment wp-gpios below.
+ */
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
 	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;	/* GPIO_126 */
+	/*wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;*/	/* GPIO_126 */
 };
 
 &mmc2 {
@@ -473,8 +510,13 @@
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&vmmc2>;
 	bus-width = <4>;
-	cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>;	/* GPIO_127 */
+	cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
+	/*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/	/* GPIO_127 */
+};
+
+/* mmc3 is probed using pdata-quirks to pass wl1251 card data */
+&mmc3 {
+	status = "disabled";
 };
 
 /* bluetooth*/
@@ -496,6 +538,10 @@
 	port2-mode = "ehci-phy";
 };
 
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
 &gpmc {
 	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
 
@@ -545,7 +591,7 @@
 			reg = <0x280000 0xa00000>;
 		};
 
-		filesystem@680000 {
+		filesystem@c80000 {
 			label = "rootfs";
 			reg = <0xc80000 0>;	/* 0 = MTDPART_SIZ_FULL */
 		};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 275618f19a43..3cc8f357d5b8 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -510,6 +510,13 @@
 				};
 			};
 		};
+
+		palmas_power_button: palmas_power_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&palmas>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
 	};
 
 	twl6040: twl@4b {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b1a1263e6001..4205a8ac9ddb 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -873,7 +873,12 @@
 			dwc3@4a030000 {
 				compatible = "snps,dwc3";
 				reg = <0x4a030000 0x10000>;
-				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy>, <&usb3_phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				dr_mode = "peripheral";
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
new file mode 100644
index 000000000000..3daec912b4bf
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
@@ -0,0 +1,273 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WTGL
+ *
+ * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WTGL";
+	compatible = "buffalo,lswtgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 64 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+		         <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+
+		internal-regs {
+			pinctrl: pinctrl@10000 {
+				pinctrl-0 = <&pmx_usb_power &pmx_power_hdd
+					&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+				pinctrl-names = "default";
+
+				pmx_led_power: pmx-leds {
+					marvell,pins = "mpp0";
+					marvell,function = "gpio";
+				};
+
+				pmx_led_alarm: pmx-leds {
+					marvell,pins = "mpp2";
+					marvell,function = "gpio";
+				};
+
+				pmx_led_info: pmx-leds {
+					marvell,pins = "mpp3";
+					marvell,function = "gpio";
+				};
+
+				pmx_power_hdd: pmx-power-hdd {
+					marvell,pins = "mpp1";
+					marvell,function = "gpio";
+				};
+
+				pmx_usb_power: pmx-usb-power {
+					marvell,pins = "mpp9";
+					marvell,function = "gpio";
+				};
+
+				pmx_sata0: pmx-sata0 {
+					marvell,pins = "mpp12";
+					marvell,function = "sata0";
+				};
+
+				pmx_sata1: pmx-sata1 {
+					marvell,pins = "mpp13";
+					marvell,function = "sata1";
+				};
+
+				pmx_fan_high: pmx-fan-high {
+					marvell,pins = "mpp14";
+					marvell,function = "gpio";
+				};
+
+				pmx_fan_low: pmx-fan-low {
+					marvell,pins = "mpp17";
+					marvell,function = "gpio";
+				};
+
+				pmx_fan_lock: pmx-fan-lock {
+					marvell,pins = "mpp6";
+					marvell,function = "gpio";
+				};
+
+				pmx_power_switch: pmx-power-switch {
+					marvell,pins = "mpp8", "mpp10";
+					marvell,function = "gpio";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_switch>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		button@2 {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_alarm
+			     &pmx_led_info>;
+		pinctrl-names = "default";
+
+		led@1 {
+			label = "lswtgl:blue:power";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led@2 {
+			label = "lswtgl:red:alarm";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led@3 {
+			label = "lswtgl:amber:info";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
+			 &gpio0 17 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+
+	rtc {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+	};
+};
+
+&wdt {
+	status = "disabled";
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts
new file mode 100644
index 000000000000..6b47a52ceb9c
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-lswsgl.dts
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2015 Benjamin Cama <benoar@dolka.fr>
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Based on the board file arch/arm/mach-orion5x/lsmini-setup.c,
+ * Copyright (C) 2008 Alexey Kopytko <alexey@kopytko.ru>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Buffalo Linkstation Mini (LS-WSGL)";
+	compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		func {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "Power-on Switch";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+		autopower {
+			label = "Power-auto Switch";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_alarm &pmx_led_info &pmx_led_func
+			     &pmx_led_power>;
+		pinctrl-names = "default";
+
+		alarm {
+			label = "lswsgl:alarm:red";
+			gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		info {
+			label = "lswsgl:info:amber";
+			gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		func {
+			label = "lswsgl:func:blue:top";
+			gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "lswsgl:power:blue:bottom";
+			gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power &pmx_usb_power>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full256Kb";
+			reg = <0 0x40000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+	};
+};
+
+&pinctrl {
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp15", "mpp17", "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_func: pmx-leds {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_power: pmx-sata0-power {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_power: pmx-sata1-power {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+
+	pmx_usb_power: pmx-usb-power {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 90b99714ad80..7f68a1ee7073 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -7,6 +7,15 @@
 	compatible = "marvell,pxa27x";
 
 	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-channels = <32>;
+			#dma-cells = <2>;
+			status = "okay";
+		};
+
 		pxairq: interrupt-controller@40d00000 {
 			marvell,intc-priority;
 			marvell,intc-nr-irqs = <34>;
@@ -17,6 +26,14 @@
 			clocks = <&clks CLK_NONE>;
 		};
 
+		pxa27x_ohci: usb@4c000000 {
+			compatible = "marvell,pxa-ohci";
+			reg = <0x4c000000 0x10000>;
+			interrupts = <3>;
+			clocks = <&clks CLK_USBHOST>;
+			status = "disabled";
+		};
+
 		pwm0: pwm@40b00000 {
 			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
 			reg = <0x40b00000 0x10>;
@@ -50,6 +67,8 @@
 			reg = <0x40f00180 0x24>;
 			interrupts = <6>;
 			clocks = <&clks CLK_PWRI2C>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -68,6 +87,23 @@
 			clocks = <&clks CLK_KEYPAD>;
 			status = "disabled";
 		};
+
+		pxa_camera: imaging@50000000 {
+			compatible = "marvell,pxa270-qci";
+			reg = <0x50000000 0x1000>;
+			interrupts = <33>;
+			dmas = <&pdma 68 0	/* Y channel */
+				&pdma 69 0	/* U channel */
+				&pdma 70 0>;	/* V channel */
+			dma-names = "CI_Y", "CI_U", "CI_V";
+
+			clocks = <&clks CLK_CAMERA>;
+			clock-names = "ciclk";
+			clock-frequency = <5000000>;
+			clock-output-names = "qci_mclk";
+
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index 71a0cd7388d1..5e5af078b9b5 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -128,6 +128,10 @@
 			compatible = "marvell,pxa-mmc";
 			reg = <0x41100000 0x1000>;
 			interrupts = <23>;
+			clocks = <&clks CLK_MMC>;
+			dmas = <&pdma 21 3
+				&pdma 22 3>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 7ad0b1771098..cf6998a0804d 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -6,6 +6,15 @@
 	compatible = "marvell,pxa3xx";
 
 	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-channels = <32>;
+			#dma-cells = <2>;
+			status = "okay";
+		};
+
 		pwri2c: i2c@40f500c0 {
 			compatible = "mrvl,pwri2c";
 			reg = <0x40f500c0 0x30>;
@@ -21,6 +30,8 @@
 			reg = <0x43100000 90>;
 			interrupts = <45>;
 			clocks = <&clks CLK_NAND>;
+			dmas = <&pdma 97>;
+			dma-names = "data";
 			#address-cells = <1>;
 			#size-cells = <1>;	
 			status = "disabled";
@@ -42,6 +53,47 @@
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
 		};
+
+		mmc0: mmc@41100000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x41100000 0x1000>;
+			interrupts = <23>;
+			clocks = <&clks CLK_MMC>;
+			dmas = <&pdma 21 3
+				&pdma 22 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		mmc1: mmc@42000000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x42000000 0x1000>;
+			interrupts = <41>;
+			clocks = <&clks CLK_MMC1>;
+			dmas = <&pdma 93 3
+				&pdma 94 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		mmc2: mmc@42500000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x42500000 0x1000>;
+			interrupts = <55>;
+			clocks = <&clks CLK_MMC2>;
+			dmas = <&pdma 46 3
+				&pdma 47 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		pxa3xx_ohci: usb@4c000000 {
+			compatible = "marvell,pxa-ohci";
+			reg = <0x4c000000 0x10000>;
+			interrupts = <3>;
+			clocks = <&clks CLK_USBHOST>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 71512b3ca444..34ccb260f12a 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -67,6 +67,12 @@
 					bias-pull-down;
 				};
 
+				pm8921_l5: l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
 				pm8921_l23: l23 {
 					regulator-min-microvolt = <1700000>;
 					regulator-max-microvolt = <1900000>;
@@ -140,19 +146,33 @@
 			status = "okay";
 		};
 
+		/* on board fixed 3.3v supply */
+		v3p3_fixed: v3p3 {
+			compatible = "regulator-fixed";
+			regulator-name = "PCIE V3P3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
 				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
 			sdcc3: sdcc@12180000 {
 				status = "okay";
+				vmmc-supply = <&v3p3_fixed>;
 			};
 			/* WLAN */
 			sdcc4: sdcc@121c0000 {
 				status = "okay";
+				vmmc-supply = <&v3p3_fixed>;
+				vqmmc-supply = <&v3p3_fixed>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index a7c939ba8873..88d6655ddaf6 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -7,6 +7,7 @@
 
 	aliases {
 		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
 	};
 
 	soc {
@@ -73,6 +74,12 @@
 					bias-pull-down;
 				};
 
+				pm8921_l5: l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
 				pm8921_l6: l6 {
 					regulator-min-microvolt = <2950000>;
 					regulator-max-microvolt = <2950000>;
@@ -84,9 +91,25 @@
 					regulator-max-microvolt = <1900000>;
 					bias-pull-down;
 				};
+
+				pm8921_lvs1: lvs1 {
+					bias-pull-down;
+				};
 			};
 		};
 
+		ext_3p3v: regulator-fixed@1 {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "ext_3p3v";
+			regulator-type = "voltage";
+			startup-delay-us = <0>;
+			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
 		gsbi3: gsbi@16200000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
@@ -115,6 +138,18 @@
 			};
 		};
 
+		gsbi@16500000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@16540000 {
+				status = "ok";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart_pins>;
+			};
+		};
+
 		gsbi@16600000 {
 			status = "ok";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
@@ -175,11 +210,14 @@
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
 				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
 			sdcc3: sdcc@12180000 {
 				status = "okay";
+				vmmc-supply = <&pm8921_l6>;
 				pinctrl-names	= "default";
 				pinctrl-0	= <&card_detect>;
 				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
@@ -187,6 +225,8 @@
 			/* WLAN */
 			sdcc4: sdcc@121c0000 {
 				status = "okay";
+				vmmc-supply = <&ext_3p3v>;
+				vqmmc-supply = <&pm8921_lvs1>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index df2061ec630d..d2e94d647c27 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -6,7 +6,6 @@
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-
 / {
 	model = "Qualcomm APQ8064";
 	compatible = "qcom,apq8064";
@@ -127,6 +126,13 @@
 					function = "gsbi3";
 				};
 			};
+
+			uart_pins: uart_pins {
+				mux {
+					pins = "gpio14", "gpio15", "gpio16", "gpio17";
+					function = "gsbi6";
+				};
+			};
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -243,13 +249,13 @@
 		gsbi3: gsbi@16200000 {
 			status = "disabled";
 			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
 			reg = <0x16200000 0x100>;
 			clocks = <&gcc GSBI3_H_CLK>;
 			clock-names = "iface";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-
 			i2c3: i2c@16280000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x16280000 0x1000>;
@@ -260,6 +266,28 @@
 			};
 		};
 
+		gsbi6: gsbi@16500000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <6>;
+			reg = <0x16500000 0x03>;
+			clocks = <&gcc GSBI6_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi6_serial: serial@16540000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16540000 0x100>,
+				      <0x16500000 0x03>;
+				interrupts = <0 156 0x0>;
+				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
 		gsbi7: gsbi@16600000 {
 			status = "disabled";
 			compatible = "qcom,gsbi-v1.0.0";
@@ -287,6 +315,53 @@
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8921";
+				interrupt-parent = <&tlmm_pinmux>;
+				interrupts = <74 8>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pm8921_gpio: gpio@150 {
+
+					compatible = "qcom,pm8921-gpio";
+					reg = <0x150>;
+					interrupts = <192 1>, <193 1>, <194 1>,
+						     <195 1>, <196 1>, <197 1>,
+						     <198 1>, <199 1>, <200 1>,
+						     <201 1>, <202 1>, <203 1>,
+						     <204 1>, <205 1>, <206 1>,
+						     <207 1>, <208 1>, <209 1>,
+						     <210 1>, <211 1>, <212 1>,
+						     <213 1>, <214 1>, <215 1>,
+						     <216 1>, <217 1>, <218 1>,
+						     <219 1>, <220 1>, <221 1>,
+						     <222 1>, <223 1>, <224 1>,
+						     <225 1>, <226 1>, <227 1>,
+						     <228 1>, <229 1>, <230 1>,
+						     <231 1>, <232 1>, <233 1>,
+						     <234 1>, <235 1>;
+
+					gpio-controller;
+					#gpio-cells = <2>;
+
+				};
+
+				pm8921_mpps: mpps@50 {
+					compatible = "qcom,pm8921-mpp";
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupts =
+					<128 1>, <129 1>, <130 1>, <131 1>,
+					<132 1>, <133 1>, <134 1>, <135 1>,
+					<136 1>, <137 1>, <138 1>, <139 1>;
+				};
+
+			};
 		};
 
 		gcc: clock-controller@900000 {
@@ -448,14 +523,6 @@
 		};
 
 		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-
 		sdcc1bam:dma@12402000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
@@ -505,7 +572,6 @@
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
 				dma-names = "tx", "rx";
 			};
@@ -524,7 +590,6 @@
 				cap-mmc-highspeed;
 				max-frequency	= <192000000>;
 				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
 				dma-names = "tx", "rx";
 			};
@@ -542,8 +607,6 @@
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
 				max-frequency	= <48000000>;
-				vmmc-supply = <&vsdcc_fixed>;
-				vqmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index e0b2ce2910e0..ef2fe72b54c9 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -67,15 +67,16 @@
 			cpu-offset = <0x40000>;
 		};
 
-		msmgpio: gpio@800000 {
-			compatible = "qcom,msm-gpio";
-			reg = <0x00800000 0x4000>;
+		tlmm: pinctrl@800000 {
+			compatible = "qcom,msm8660-pinctrl";
+			reg = <0x800000 0x4000>;
+
 			gpio-controller;
 			#gpio-cells = <2>;
-			ngpio = <173>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+
 		};
 
 		gcc: clock-controller@900000 {
@@ -115,7 +116,7 @@
 
 			pmicintc: pmic@0 {
 				compatible = "qcom,pm8058";
-				interrupt-parent = <&msmgpio>;
+				interrupt-parent = <&tlmm>;
 				interrupts = <88 8>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 7f70fae90959..fad71d5527b0 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -26,6 +26,308 @@
 				status = "okay";
 			};
 		};
+
+		rpm@108000 {
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s4>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+				vdd_ncp-supply = <&pm8921_l6>;
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vdd_l21_l23_l29-supply = <&pm8921_s8>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+				/* Buck SMPS */
+				pm8921_s1: s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s2: s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8921_s3: s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+					bias-pull-down;
+				};
+
+				pm8921_s4: s4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+				};
+
+				pm8921_s7: s7 {
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s8: s8 {
+					regulator-always-on;
+					regulator-min-microvolt = <2050000>;
+					regulator-max-microvolt = <2050000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* PMOS LDO */
+				pm8921_l1: l1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8921_l2: l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l3: l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				pm8921_l4: l4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l5: l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l6: l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l7: l7 {
+					regulator-always-on;
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l8: l8 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l9: l9 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l10: l10 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l11: l11 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8921_l12: l12 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l14: l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l15: l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l16: l16 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l17: l17 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l18: l18 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					bias-pull-down;
+				};
+
+				pm8921_l21: l21 {
+					regulator-min-microvolt = <1900000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				pm8921_l22: l22 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <2750000>;
+					bias-pull-down;
+				};
+
+				pm8921_l23: l23 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l24: l24 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				pm8921_l25: l25 {
+					regulator-always-on;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				pm8921_lvs1: lvs1 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs2: lvs2 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs3: lvs3 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs4: lvs4 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs5: lvs5 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs6: lvs6 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs7: lvs7 {
+					bias-pull-down;
+				};
+
+				pm8921_ncp: ncp {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+			};
+		};
+
+		gsbi@16000000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_SPI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_default>;
+			spi@16080000 {
+				status = "ok";
+				eth@0 {
+					compatible = "micrel,ks8851";
+					reg = <0>;
+					interrupt-parent = <&msmgpio>;
+					interrupts = <90 8>;
+					spi-max-frequency = <5400000>;
+					vdd-supply = <&ext_l2>;
+					vdd-io-supply = <&pm8921_lvs6>;
+					reset-gpios = <&msmgpio 89 0>;
+				};
+			};
+		};
+
+		pinctrl@800000 {
+			spi1_default: spi1_default {
+				mux {
+					pins = "gpio6", "gpio7", "gpio9";
+					function = "gsbi1";
+				};
+
+				mosi {
+					pins = "gpio6";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				miso {
+					pins = "gpio7";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs {
+					pins = "gpio8";
+					drive-strength = <12>;
+					bias-disable;
+					output-low;
+				};
+
+				clk {
+					pins = "gpio9";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		ext_l2: gpio-regulator@91 {
+			compatible = "regulator-fixed";
+			regulator-name = "ext_l2";
+			gpio = <&msmgpio 91 0>;
+			startup-delay-us = <10000>;
+			enable-active-high;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index a02b984cc68d..2096a94c9b52 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 
 / {
@@ -73,11 +74,10 @@
 			cpu-offset = <0x80000>;
 		};
 
-		msmgpio: gpio@800000 {
-			compatible = "qcom,msm-gpio";
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,msm8960-pinctrl";
 			gpio-controller;
 			#gpio-cells = <2>;
-			ngpio = <150>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -105,6 +105,24 @@
 			#reset-cells = <1>;
 		};
 
+		l2cc: clock-controller@2011000 {
+			compatible	= "syscon";
+			reg		= <0x2011000 0x1000>;
+		};
+
+		rpm@108000 {
+			compatible	= "qcom,rpm-msm8960";
+			reg		= <0x108000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+			};
+		};
+
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
@@ -253,5 +271,30 @@
 			compatible = "qcom,tcsr-msm8960", "syscon";
 			reg = <0x1a400000 0x100>;
 		};
+
+		gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <1>;
+			reg = <0x16000000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16080000 0x1000>;
+				interrupts = <0 147 0>;
+				spi-max-frequency = <24000000>;
+				cs-gpios = <&msmgpio 8 0>;
+
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 37b47b5538b8..d7c99b894a49 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -9,6 +9,17 @@
 	compatible = "qcom,msm8974";
 	interrupt-parent = <&intc>;
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -220,6 +231,11 @@
 			reg = <0xfc400000 0x4000>;
 		};
 
+		tcsr_mutex_block: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
+
 		mmcc: clock-controller@fd8c0000 {
 			compatible = "qcom,mmcc-msm8974";
 			#clock-cells = <1>;
@@ -227,6 +243,22 @@
 			reg = <0xfd8c0000 0x6000>;
 		};
 
+		tcsr_mutex: tcsr-mutex {
+			compatible = "qcom,tcsr-mutex";
+			syscon = <&tcsr_mutex_block 0 0x80>;
+
+			#hwlock-cells = <1>;
+		};
+
+		smem@fa00000 {
+			compatible = "qcom,smem";
+
+			memory-region = <&smem_region>;
+			reg = <0xfc428000 0x4000>;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
 		serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 277e73c110e5..060c32cbd669 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -86,6 +86,7 @@
 			reg = <0xfcfe0000 0x18>;
 			clocks = <&extal_clk>, <&usb_x1_clk>;
 			clock-output-names = "pll", "i", "g";
+			#power-domain-cells = <0>;
 		};
 
 		/* MSTP clocks */
@@ -157,6 +158,7 @@
 			     <0 189 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -169,6 +171,7 @@
 			     <0 193 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -181,6 +184,7 @@
 			     <0 197 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -193,6 +197,7 @@
 			     <0 201 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -205,6 +210,7 @@
 			     <0 205 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -217,6 +223,7 @@
 			     <0 209 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -229,6 +236,7 @@
 			     <0 213 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -241,6 +249,7 @@
 			     <0 217 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -252,6 +261,7 @@
 			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -266,6 +276,7 @@
 			     <0 243 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -280,6 +291,7 @@
 			     <0 246 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -294,6 +306,7 @@
 			     <0 249 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -308,6 +321,7 @@
 			     <0 252 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -338,6 +352,7 @@
 			     <0 164 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
 		clock-frequency = <100000>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -356,6 +371,7 @@
 			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
 		clock-frequency = <100000>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -374,6 +390,7 @@
 			     <0 180 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
 		clock-frequency = <100000>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -392,6 +409,7 @@
 			     <0 188 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
 		clock-frequency = <100000>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -402,6 +420,7 @@
 		interrupt-names = "tgi0a";
 		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 7ee22a41c6c9..cb4f7b2798fe 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -207,6 +207,13 @@
 		reg = <0 0xe6050000 0 0x9000>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-ranges =
+			<&pfc 0 0 31>, <&pfc 32 32 9>,
+			<&pfc 64 64 22>, <&pfc 96 96 31>,
+			<&pfc 128 128 7>, <&pfc 160 160 19>,
+			<&pfc 192 192 31>, <&pfc 224 224 27>,
+			<&pfc 256 256 28>, <&pfc 288 288 21>,
+			<&pfc 320 320 10>;
 		interrupts-extended =
 			<&irqc0  0 0>, <&irqc0  1 0>, <&irqc0  2 0>, <&irqc0  3 0>,
 			<&irqc0  4 0>, <&irqc0  5 0>, <&irqc0  6 0>, <&irqc0  7 0>,
@@ -434,7 +441,7 @@
 	};
 
 	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 2e31d8c01cbf..105d9c95de4a 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -224,6 +224,9 @@
 };
 
 &pfc {
+	pinctrl-0 = <&lcd0_pins>;
+	pinctrl-names = "default";
+
 	ether_pins: ether {
 		renesas,groups = "gether_mii", "gether_int";
 		renesas,function = "gether";
@@ -259,6 +262,16 @@
 				 "fsia_data_in_1", "fsia_data_out_0";
 		renesas,function = "fsia";
 	};
+
+	lcd0_pins: lcd0 {
+		renesas,groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync";
+		renesas,function = "lcd0";
+
+		/* DBGMD/LCDC0/FSIA MUX */
+		gpio-hog;
+		gpios = <176 0>;
+		output-high;
+	};
 };
 
 &tpu {
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index d84714468cce..e14cb1438216 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -291,6 +291,7 @@
 		      <0xe605800c 0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-ranges = <&pfc 0 0 212>;
 		interrupts-extended =
 			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
 			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 7ce9f5fd5865..4b1fa9f42ad5 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -53,6 +53,7 @@
 		reg = <0xfde00000 0x400>;
 		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7778_CLK_ETHER>;
+		power-domains = <&cpg_clocks>;
 		phy-mode = "rmii";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -152,6 +153,7 @@
 		reg = <0xffc70000 0x1000>;
 		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -162,6 +164,7 @@
 		reg = <0xffc71000 0x1000>;
 		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -172,6 +175,7 @@
 		reg = <0xffc72000 0x1000>;
 		interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -182,6 +186,7 @@
 		reg = <0xffc73000 0x1000>;
 		interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -193,6 +198,7 @@
 			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		#renesas,channels = <3>;
 
@@ -207,6 +213,7 @@
 			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		#renesas,channels = <3>;
 
@@ -221,6 +228,7 @@
 			     <0 42 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		#renesas,channels = <3>;
 
@@ -288,6 +296,7 @@
 		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -297,6 +306,7 @@
 		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -306,6 +316,7 @@
 		interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -315,6 +326,7 @@
 		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -324,6 +336,7 @@
 		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -333,6 +346,7 @@
 		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -341,6 +355,7 @@
 		reg = <0xffe4e000 0x100>;
 		interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_MMC>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -349,6 +364,7 @@
 		reg = <0xffe4c000 0x100>;
 		interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -357,6 +373,7 @@
 		reg = <0xffe4d000 0x100>;
 		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_SDHI1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -365,6 +382,7 @@
 		reg = <0xffe4f000 0x100>;
 		interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_SDHI2>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -373,6 +391,7 @@
 		reg = <0xfffc7000 0x18>;
 		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -383,6 +402,7 @@
 		reg = <0xfffc8000 0x18>;
 		interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -393,6 +413,7 @@
 		reg = <0xfffc6000 0x18>;
 		interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -419,6 +440,7 @@
 			clocks = <&extal_clk>;
 			clock-output-names = "plla", "pllb", "b",
 					     "out", "p", "s", "s1";
+			#power-domain-cells = <0>;
 		};
 
 		/* Audio clocks; frequencies are set by boards if applicable. */
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 5c8071e87ae9..6afa909865b5 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -148,7 +148,7 @@
 		interrupt-controller;
 	};
 
-	irqpin0: interrupt-controller@fe780010 {
+	irqpin0: interrupt-controller@fe78001c {
 		compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		status = "disabled";
@@ -157,7 +157,8 @@
 			<0xfe780010 4>,
 			<0xfe780024 4>,
 			<0xfe780044 4>,
-			<0xfe780064 4>;
+			<0xfe780064 4>,
+			<0xfe780000 4>;
 		interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
 			      0 28 IRQ_TYPE_LEVEL_HIGH
 			      0 29 IRQ_TYPE_LEVEL_HIGH
@@ -172,6 +173,7 @@
 		reg = <0xffc70000 0x1000>;
 		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -182,6 +184,7 @@
 		reg = <0xffc71000 0x1000>;
 		interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -192,6 +195,7 @@
 		reg = <0xffc72000 0x1000>;
 		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -202,6 +206,7 @@
 		reg = <0xffc73000 0x1000>;
 		interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -211,6 +216,7 @@
 		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -220,6 +226,7 @@
 		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -229,6 +236,7 @@
 		interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -238,6 +246,7 @@
 		interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -247,6 +256,7 @@
 		interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -256,6 +266,7 @@
 		interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
 		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -277,6 +288,7 @@
 			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		#renesas,channels = <3>;
 
@@ -291,6 +303,7 @@
 			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		#renesas,channels = <3>;
 
@@ -305,6 +318,7 @@
 			     <0 42 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		#renesas,channels = <3>;
 
@@ -316,6 +330,7 @@
 		reg = <0xfc600000 0x2000>;
 		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	sdhi0: sd@ffe4c000 {
@@ -323,6 +338,7 @@
 		reg = <0xffe4c000 0x100>;
 		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -331,6 +347,7 @@
 		reg = <0xffe4d000 0x100>;
 		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -339,6 +356,7 @@
 		reg = <0xffe4e000 0x100>;
 		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -347,6 +365,7 @@
 		reg = <0xffe4f000 0x100>;
 		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -357,6 +376,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -367,6 +387,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -377,6 +398,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -385,6 +407,7 @@
 		reg = <0 0xfff80000 0 0x40000>;
 		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_DU>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 
 		ports {
@@ -426,6 +449,7 @@
 			#clock-cells = <1>;
 			clock-output-names = "plla", "z", "zs", "s",
 					     "s1", "p", "b", "out";
+			#power-domain-cells = <0>;
 		};
 
 		/* Fixed factor clocks */
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 2eb8a995ae9f..37dec5269491 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -174,7 +174,7 @@
 			  1800000 0>;
 	};
 
-	sound {
+	rsnd_ak4643: sound {
 		compatible = "simple-audio-card";
 
 		simple-audio-card,format = "left_j";
@@ -548,7 +548,7 @@
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 51ab8865ea37..a0b2a79cbfbd 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -113,7 +113,7 @@
 	};
 
 	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
@@ -134,6 +134,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio1: gpio@e6051000 {
@@ -146,6 +147,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio2: gpio@e6052000 {
@@ -158,6 +160,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio3: gpio@e6053000 {
@@ -170,6 +173,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio4: gpio@e6054000 {
@@ -182,6 +186,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio5: gpio@e6055000 {
@@ -194,6 +199,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	thermal@e61f0000 {
@@ -201,6 +207,7 @@
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	timer {
@@ -218,6 +225,7 @@
 			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		renesas,channels-mask = <0x60>;
 
@@ -237,6 +245,7 @@
 			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		renesas,channels-mask = <0xff>;
 
@@ -253,6 +262,7 @@
 			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 3 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	dmac0: dma-controller@e6700000 {
@@ -281,6 +291,7 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
@@ -311,6 +322,7 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
@@ -339,6 +351,7 @@
 				"ch12";
 		clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <13>;
 	};
@@ -367,6 +380,7 @@
 				"ch12";
 		clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <13>;
 	};
@@ -378,6 +392,7 @@
 			      0 109 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <2>;
 	};
@@ -389,6 +404,7 @@
 			      0 110 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <2>;
 	};
@@ -400,6 +416,7 @@
 		reg = <0 0xe6508000 0 0x40>;
 		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -410,6 +427,7 @@
 		reg = <0 0xe6518000 0 0x40>;
 		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -420,6 +438,7 @@
 		reg = <0 0xe6530000 0 0x40>;
 		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -430,6 +449,7 @@
 		reg = <0 0xe6540000 0 0x40>;
 		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -442,6 +462,7 @@
 		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
 		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -454,6 +475,7 @@
 		clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
 		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -466,6 +488,7 @@
 		clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
 		dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -478,6 +501,7 @@
 		clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
 		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -488,6 +512,7 @@
 		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
 		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		reg-io-width = <4>;
 		status = "disabled";
 		max-frequency = <97500000>;
@@ -500,6 +525,7 @@
 		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
 		dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		reg-io-width = <4>;
 		status = "disabled";
 		max-frequency = <97500000>;
@@ -517,6 +543,7 @@
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
 		dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -527,6 +554,7 @@
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
 		dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -537,6 +565,7 @@
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
 		dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -547,6 +576,7 @@
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
 		dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -558,6 +588,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -569,6 +600,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -580,6 +612,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -591,6 +624,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -602,6 +636,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -613,6 +648,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -624,6 +660,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -635,6 +672,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -646,6 +684,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -657,6 +696,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -665,17 +705,30 @@
 		reg = <0 0xee700000 0 0x400>;
 		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+		power-domains = <&cpg_clocks>;
 		phy-mode = "rmii";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
 	};
 
+	avb: ethernet@e6800000 {
+		compatible = "renesas,etheravb-r8a7790";
+		reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+		interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	sata0: sata@ee300000 {
 		compatible = "renesas,sata-r8a7790";
 		reg = <0 0xee300000 0 0x2000>;
 		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -684,6 +737,7 @@
 		reg = <0 0xee500000 0 0x2000>;
 		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -692,12 +746,13 @@
 		reg = <0 0xe6590000 0 0x100>;
 		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
-		renesas,buswait = <4>;
-		phys = <&usb0 1>;
-		phy-names = "usb";
 		dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
 		       <&usb_dmac1 0>, <&usb_dmac1 1>;
 		dma-names = "ch0", "ch1", "ch2", "ch3";
+		power-domains = <&cpg_clocks>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
@@ -708,6 +763,7 @@
 		#size-cells = <0>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
 		clock-names = "usbhs";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 
 		usb0: usb-channel@0 {
@@ -722,33 +778,37 @@
 
 	vin0: video@e6ef0000 {
 		compatible = "renesas,vin-r8a7790";
-		clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
 		reg = <0 0xe6ef0000 0 0x1000>;
 		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	vin1: video@e6ef1000 {
 		compatible = "renesas,vin-r8a7790";
-		clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
 		reg = <0 0xe6ef1000 0 0x1000>;
 		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	vin2: video@e6ef2000 {
 		compatible = "renesas,vin-r8a7790";
-		clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
 		reg = <0 0xe6ef2000 0 0x1000>;
 		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	vin3: video@e6ef3000 {
 		compatible = "renesas,vin-r8a7790";
-		clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
 		reg = <0 0xe6ef3000 0 0x1000>;
 		interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -757,6 +817,7 @@
 		reg = <0 0xfe920000 0 0x8000>;
 		interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
+		power-domains = <&cpg_clocks>;
 
 		renesas,has-sru;
 		renesas,#rpf = <5>;
@@ -769,6 +830,7 @@
 		reg = <0 0xfe928000 0 0x8000>;
 		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+		power-domains = <&cpg_clocks>;
 
 		renesas,has-lut;
 		renesas,has-sru;
@@ -782,6 +844,7 @@
 		reg = <0 0xfe930000 0 0x8000>;
 		interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
+		power-domains = <&cpg_clocks>;
 
 		renesas,has-lif;
 		renesas,has-lut;
@@ -795,6 +858,7 @@
 		reg = <0 0xfe938000 0 0x8000>;
 		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
+		power-domains = <&cpg_clocks>;
 
 		renesas,has-lif;
 		renesas,has-lut;
@@ -849,6 +913,7 @@
 		clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
 			 <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -859,9 +924,18 @@
 		clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
 			 <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
+	jpu: jpeg-codec@fe980000 {
+		compatible = "renesas,jpu-r8a7790";
+		reg = <0 0xfe980000 0 0x10300>;
+		interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_JPU>;
+		power-domains = <&cpg_clocks>;
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -936,6 +1010,7 @@
 			clock-output-names = "main", "pll0", "pll1", "pll3",
 					     "lb", "qspi", "sdh", "sd0", "sd1",
 					     "z", "rcan", "adsp";
+			#power-domain-cells = <0>;
 		};
 
 		/* Variable factor clocks */
@@ -1249,16 +1324,18 @@
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
 			clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
-			         <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
+			         <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>,
+				 <&zs_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2
-				R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 R8A7790_CLK_ETHER
+				R8A7790_CLK_VIN1 R8A7790_CLK_VIN0
+				R8A7790_CLK_ETHERAVB R8A7790_CLK_ETHER
 				R8A7790_CLK_SATA1 R8A7790_CLK_SATA0
 			>;
 			clock-output-names =
-				"mlb", "vin3", "vin2", "vin1", "vin0", "ether",
-				"sata1", "sata0";
+				"mlb", "vin3", "vin2", "vin1", "vin0",
+				"etheravb", "ether", "sata1", "sata0";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1291,6 +1368,7 @@
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>;
 
 			#clock-cells = <1>;
@@ -1300,6 +1378,7 @@
 				R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0
 				R8A7790_CLK_SCU_ALL
 				R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0
+				R8A7790_CLK_SCU_CTU1_MIX1 R8A7790_CLK_SCU_CTU0_MIX0
 				R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5
 				R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0
 			>;
@@ -1309,6 +1388,7 @@
 				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
 				"scu-all",
 				"scu-dvc1", "scu-dvc0",
+				"scu-ctu1-mix1", "scu-ctu0-mix0",
 				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
 				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
 		};
@@ -1321,6 +1401,7 @@
 		clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
 		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1334,6 +1415,7 @@
 		clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
 		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1346,6 +1428,7 @@
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
 		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1358,6 +1441,7 @@
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
 		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1370,6 +1454,7 @@
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
 		dmas = <&dmac0 0x45>, <&dmac0 0x46>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1380,6 +1465,7 @@
 		reg = <0 0xee000000 0 0xc00>;
 		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+		power-domains = <&cpg_clocks>;
 		phys = <&usb2 1>;
 		phy-names = "usb";
 		status = "disabled";
@@ -1388,10 +1474,11 @@
 	pci0: pci@ee090000 {
 		compatible = "renesas,pci-r8a7790";
 		device_type = "pci";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
 		reg = <0 0xee090000 0 0xc00>,
 		      <0 0xee080000 0 0x1100>;
 		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 
 		bus-range = <0 0>;
@@ -1422,10 +1509,11 @@
 	pci1: pci@ee0b0000 {
 		compatible = "renesas,pci-r8a7790";
 		device_type = "pci";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
 		reg = <0 0xee0b0000 0 0xc00>,
 		      <0 0xee0a0000 0 0x1100>;
 		interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 
 		bus-range = <1 1>;
@@ -1443,6 +1531,7 @@
 		compatible = "renesas,pci-r8a7790";
 		device_type = "pci";
 		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		power-domains = <&cpg_clocks>;
 		reg = <0 0xee0d0000 0 0xc00>,
 		      <0 0xee0c0000 0 0x1100>;
 		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
@@ -1495,6 +1584,7 @@
 		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
 		clock-names = "pcie", "pcie_bus";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -1524,6 +1614,8 @@
 			<&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
 			<&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
 			<&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
+			<&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>,
+			<&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>,
 			<&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
 			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
 		clock-names = "ssi-all",
@@ -1531,6 +1623,8 @@
 				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
 				"src.9", "src.8", "src.7", "src.6", "src.5",
 				"src.4", "src.3", "src.2", "src.1", "src.0",
+				"ctu.0", "ctu.1",
+				"mix.0", "mix.1",
 				"dvc.0", "dvc.1",
 				"clk_a", "clk_b", "clk_c", "clk_i";
 
@@ -1547,6 +1641,22 @@
 			};
 		};
 
+		rcar_sound,mix {
+			mix0: mix@0 { };
+			mix1: mix@1 { };
+		};
+
+		rcar_sound,ctu {
+			ctu00: ctu@0 { };
+			ctu01: ctu@1 { };
+			ctu02: ctu@2 { };
+			ctu03: ctu@3 { };
+			ctu10: ctu@4 { };
+			ctu11: ctu@5 { };
+			ctu12: ctu@6 { };
+			ctu13: ctu@7 { };
+		};
+
 		rcar_sound,src {
 			src0: src@0 {
 				interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index cffe33ff4d16..dc158845afdc 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -242,7 +242,7 @@
 			  1800000 0>;
 	};
 
-	sound {
+	rsnd_ak4643: sound {
 		compatible = "simple-audio-card";
 
 		simple-audio-card,format = "left_j";
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index dc1cd3f16606..831525dd39a6 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -70,7 +70,7 @@
 	};
 
 	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
@@ -91,6 +91,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio1: gpio@e6051000 {
@@ -103,6 +104,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio2: gpio@e6052000 {
@@ -115,6 +117,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio3: gpio@e6053000 {
@@ -127,6 +130,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio4: gpio@e6054000 {
@@ -139,6 +143,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio5: gpio@e6055000 {
@@ -151,6 +156,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio6: gpio@e6055400 {
@@ -163,6 +169,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	gpio7: gpio@e6055800 {
@@ -175,6 +182,7 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	thermal@e61f0000 {
@@ -182,6 +190,7 @@
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	timer {
@@ -199,6 +208,7 @@
 			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		renesas,channels-mask = <0x60>;
 
@@ -218,6 +228,7 @@
 			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		renesas,channels-mask = <0xff>;
 
@@ -240,6 +251,7 @@
 			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	dmac0: dma-controller@e6700000 {
@@ -268,6 +280,7 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
@@ -298,6 +311,7 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
@@ -326,6 +340,7 @@
 				"ch12";
 		clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <13>;
 	};
@@ -354,6 +369,7 @@
 				"ch12";
 		clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <13>;
 	};
@@ -365,6 +381,7 @@
 			      0 109 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <2>;
 	};
@@ -376,6 +393,7 @@
 			      0 110 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <2>;
 	};
@@ -388,6 +406,7 @@
 		reg = <0 0xe6508000 0 0x40>;
 		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -398,6 +417,7 @@
 		reg = <0 0xe6518000 0 0x40>;
 		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -408,6 +428,7 @@
 		reg = <0 0xe6530000 0 0x40>;
 		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -418,6 +439,7 @@
 		reg = <0 0xe6540000 0 0x40>;
 		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -428,6 +450,7 @@
 		reg = <0 0xe6520000 0 0x40>;
 		interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -439,6 +462,7 @@
 		reg = <0 0xe6528000 0 0x40>;
 		interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -452,6 +476,7 @@
 		clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
 		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -464,6 +489,7 @@
 		clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
 		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -476,6 +502,7 @@
 		clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
 		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -492,6 +519,7 @@
 		clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
 		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		reg-io-width = <4>;
 		status = "disabled";
 		max-frequency = <97500000>;
@@ -504,6 +532,7 @@
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
 		dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -514,6 +543,7 @@
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
 		dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -524,6 +554,7 @@
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
 		dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -535,6 +566,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -546,6 +578,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -557,6 +590,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -568,6 +602,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -579,6 +614,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -590,6 +626,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -601,6 +638,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -612,6 +650,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -623,6 +662,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -634,6 +674,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -645,6 +686,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -656,6 +698,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -667,6 +710,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -678,6 +722,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -689,6 +734,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -700,6 +746,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -711,6 +758,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -722,6 +770,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -730,6 +779,7 @@
 		reg = <0 0xee700000 0 0x400>;
 		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
+		power-domains = <&cpg_clocks>;
 		phy-mode = "rmii";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -741,6 +791,7 @@
 		reg = <0 0xee300000 0 0x2000>;
 		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -749,6 +800,7 @@
 		reg = <0 0xee500000 0 0x2000>;
 		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -757,12 +809,13 @@
 		reg = <0 0xe6590000 0 0x100>;
 		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
-		renesas,buswait = <4>;
-		phys = <&usb0 1>;
-		phy-names = "usb";
 		dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
 		       <&usb_dmac1 0>, <&usb_dmac1 1>;
 		dma-names = "ch0", "ch1", "ch2", "ch3";
+		power-domains = <&cpg_clocks>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
@@ -773,6 +826,7 @@
 		#size-cells = <0>;
 		clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
 		clock-names = "usbhs";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 
 		usb0: usb-channel@0 {
@@ -787,25 +841,28 @@
 
 	vin0: video@e6ef0000 {
 		compatible = "renesas,vin-r8a7791";
-		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
 		reg = <0 0xe6ef0000 0 0x1000>;
 		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	vin1: video@e6ef1000 {
 		compatible = "renesas,vin-r8a7791";
-		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
 		reg = <0 0xe6ef1000 0 0x1000>;
 		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	vin2: video@e6ef2000 {
 		compatible = "renesas,vin-r8a7791";
-		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
 		reg = <0 0xe6ef2000 0 0x1000>;
 		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -814,6 +871,7 @@
 		reg = <0 0xfe928000 0 0x8000>;
 		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
+		power-domains = <&cpg_clocks>;
 
 		renesas,has-lut;
 		renesas,has-sru;
@@ -827,6 +885,7 @@
 		reg = <0 0xfe930000 0 0x8000>;
 		interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
+		power-domains = <&cpg_clocks>;
 
 		renesas,has-lif;
 		renesas,has-lut;
@@ -840,6 +899,7 @@
 		reg = <0 0xfe938000 0 0x8000>;
 		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
+		power-domains = <&cpg_clocks>;
 
 		renesas,has-lif;
 		renesas,has-lut;
@@ -885,6 +945,7 @@
 		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
 			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -895,9 +956,18 @@
 		clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
 			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
+	jpu: jpeg-codec@fe980000 {
+		compatible = "renesas,jpu-r8a7791";
+		reg = <0 0xfe980000 0 0x10300>;
+		interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7791_CLK_JPU>;
+		power-domains = <&cpg_clocks>;
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -972,6 +1042,7 @@
 			clock-output-names = "main", "pll0", "pll1", "pll3",
 					     "lb", "qspi", "sdh", "sd0", "z",
 					     "rcan", "adsp";
+			#power-domain-cells = <0>;
 		};
 
 		/* Variable factor clocks */
@@ -1311,6 +1382,7 @@
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>;
 
 			#clock-cells = <1>;
@@ -1320,6 +1392,7 @@
 				R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0
 				R8A7791_CLK_SCU_ALL
 				R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0
+				R8A7791_CLK_SCU_CTU1_MIX1 R8A7791_CLK_SCU_CTU0_MIX0
 				R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5
 				R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0
 			>;
@@ -1329,6 +1402,7 @@
 				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
 				"scu-all",
 				"scu-dvc1", "scu-dvc0",
+				"scu-ctu1-mix1", "scu-ctu0-mix0",
 				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
 				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
 		};
@@ -1351,6 +1425,7 @@
 		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
 		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1364,6 +1439,7 @@
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
 		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1376,6 +1452,7 @@
 		clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
 		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1388,6 +1465,7 @@
 		clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
 		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1398,6 +1476,7 @@
 		reg = <0 0xee000000 0 0xc00>;
 		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
+		power-domains = <&cpg_clocks>;
 		phys = <&usb2 1>;
 		phy-names = "usb";
 		status = "disabled";
@@ -1406,10 +1485,11 @@
 	pci0: pci@ee090000 {
 		compatible = "renesas,pci-r8a7791";
 		device_type = "pci";
-		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
 		reg = <0 0xee090000 0 0xc00>,
 		      <0 0xee080000 0 0x1100>;
 		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 
 		bus-range = <0 0>;
@@ -1440,10 +1520,11 @@
 	pci1: pci@ee0d0000 {
 		compatible = "renesas,pci-r8a7791";
 		device_type = "pci";
-		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
 		reg = <0 0xee0d0000 0 0xc00>,
 		      <0 0xee0c0000 0 0x1100>;
 		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 
 		bus-range = <1 1>;
@@ -1493,6 +1574,7 @@
 		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
 		clock-names = "pcie", "pcie_bus";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -1582,6 +1664,8 @@
 			<&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>,
 			<&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>,
 			<&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>,
+			<&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>,
+			<&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>,
 			<&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>,
 			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
 		clock-names = "ssi-all",
@@ -1589,6 +1673,8 @@
 				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
 				"src.9", "src.8", "src.7", "src.6", "src.5",
 				"src.4", "src.3", "src.2", "src.1", "src.0",
+				"ctu.0", "ctu.1",
+				"mix.0", "mix.1",
 				"dvc.0", "dvc.1",
 				"clk_a", "clk_b", "clk_c", "clk_i";
 
@@ -1605,6 +1691,22 @@
 			};
 		};
 
+		rcar_sound,mix {
+			mix0: mix@0 { };
+			mix1: mix@1 { };
+		};
+
+		rcar_sound,ctu {
+			ctu00: ctu@0 { };
+			ctu01: ctu@1 { };
+			ctu02: ctu@2 { };
+			ctu03: ctu@3 { };
+			ctu10: ctu@4 { };
+			ctu11: ctu@5 { };
+			ctu12: ctu@6 { };
+			ctu13: ctu@7 { };
+		};
+
 		rcar_sound,src {
 			src0: src@0 {
 				interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
new file mode 100644
index 000000000000..96443ec5f6ab
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for the Gose board
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7793.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gose";
+	compatible = "renesas,gose", "renesas,r8a7793";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = &scif0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&ether {
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&scif0 {
+	status = "okay";
+};
+
+&scif1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
new file mode 100644
index 000000000000..c4654047e684
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -0,0 +1,374 @@
+/*
+ * Device Tree Source for the r8a7793 SoC
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7793-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a7793";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			voltage-tolerance = <1>; /* 1% */
+			clocks = <&cpg_clocks R8A7793_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	cmt0: timer@ffca0000 {
+		compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+
+		renesas,channels-mask = <0x60>;
+
+		status = "disabled";
+	};
+
+	cmt1: timer@e6130000 {
+		compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+
+		renesas,channels-mask = <0xff>;
+
+		status = "disabled";
+	};
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc-r8a7793", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	scif0: serial@e6e60000 {
+		compatible = "renesas,scif-r8a7793", "renesas,scif";
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scif1: serial@e6e68000 {
+		compatible = "renesas,scif-r8a7793", "renesas,scif";
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	ether: ethernet@ee700000 {
+		compatible = "renesas,ether-r8a7793";
+		reg = <0 0xee700000 0 0x400>;
+		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
+		power-domains = <&cpg_clocks>;
+		phy-mode = "rmii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* External root clock */
+		extal_clk: extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "extal";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a7793-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "sdh", "sd0", "z",
+					     "rcan", "adsp";
+			#power-domain-cells = <0>;
+		};
+
+		/* Variable factor clocks */
+		sd2_clk: sd2_clk@e6150078 {
+			compatible = "renesas,r8a7793-div6-clock",
+				     "renesas,cpg-div6-clock";
+			reg = <0 0xe6150078 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd2";
+		};
+		sd3_clk: sd3_clk@e615026c {
+			compatible = "renesas,r8a7793-div6-clock",
+				     "renesas,cpg-div6-clock";
+			reg = <0 0xe615026c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd3";
+		};
+		mmc0_clk: mmc0_clk@e6150240 {
+			compatible = "renesas,r8a7793-div6-clock",
+				     "renesas,cpg-div6-clock";
+			reg = <0 0xe6150240 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "mmc0";
+		};
+
+		/* Fixed factor clocks */
+		pll1_div2_clk: pll1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "pll1_div2";
+		};
+		zg_clk: zg_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <5>;
+			clock-mult = <1>;
+			clock-output-names = "zg";
+		};
+		zx_clk: zx_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+			clock-output-names = "zx";
+		};
+		zs_clk: zs_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+			clock-output-names = "zs";
+		};
+		hp_clk: hp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "hp";
+		};
+		p_clk: p_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+			clock-output-names = "p";
+		};
+		rclk_clk: rclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(48 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "rclk";
+		};
+		mp_clk: mp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <15>;
+			clock-mult = <1>;
+			clock-output-names = "mp";
+		};
+		cp_clk: cp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "cp";
+		};
+
+		/* Gate clocks */
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+				 <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
+				 <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>,
+				 <&zs_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_VCP0 R8A7793_CLK_VPC0
+				R8A7793_CLK_SSP1 R8A7793_CLK_TMU1
+				R8A7793_CLK_3DG R8A7793_CLK_2DDMAC
+				R8A7793_CLK_FDP1_1 R8A7793_CLK_FDP1_0
+				R8A7793_CLK_TMU3 R8A7793_CLK_TMU2
+				R8A7793_CLK_CMT0 R8A7793_CLK_TMU0
+				R8A7793_CLK_VSP1_DU1 R8A7793_CLK_VSP1_DU0
+				R8A7793_CLK_VSP1_S
+			>;
+			clock-output-names =
+				"vcp0", "vpc0", "ssp_dev", "tmu1",
+				"pvrsrvkm", "tddmac", "fdp1", "fdp0",
+				"tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+				"vsp1-du0", "vsps";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>,
+				 <&cpg_clocks R8A7793_CLK_SD0>, <&mmc0_clk>,
+				 <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>,
+				 <&rclk_clk>, <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_TPU0 R8A7793_CLK_SDHI2
+				R8A7793_CLK_SDHI1 R8A7793_CLK_SDHI0
+				R8A7793_CLK_MMCIF0 R8A7793_CLK_IIC0
+				R8A7793_CLK_PCIEC R8A7793_CLK_IIC1
+				R8A7793_CLK_SSUSB R8A7793_CLK_CMT1
+				R8A7793_CLK_USBDMAC0 R8A7793_CLK_USBDMAC1
+			>;
+			clock-output-names =
+				"tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0",
+				"i2c7", "pciec", "i2c8", "ssusb", "cmt1",
+				"usbdmac0", "usbdmac1";
+		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+			clocks = <&cp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7793_CLK_IRQC>;
+			clock-output-names = "irqc";
+		};
+		mstp7_clks: mstp7_clks@e615014c {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&mp_clk>,  <&hp_clk>, <&zs_clk>, <&p_clk>,
+				 <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+				 <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>,
+				 <&zx_clk>, <&zx_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_EHCI R8A7793_CLK_HSUSB
+				R8A7793_CLK_HSCIF2 R8A7793_CLK_SCIF5
+				R8A7793_CLK_SCIF4 R8A7793_CLK_HSCIF1
+				R8A7793_CLK_HSCIF0 R8A7793_CLK_SCIF3
+				R8A7793_CLK_SCIF2 R8A7793_CLK_SCIF1
+				R8A7793_CLK_SCIF0 R8A7793_CLK_DU1
+				R8A7793_CLK_DU0 R8A7793_CLK_LVDS0
+			>;
+			clock-output-names =
+				"ehci", "hsusb", "hscif2", "scif5", "scif4",
+				"hscif1", "hscif0", "scif3", "scif2",
+				"scif1", "scif0", "du1", "du0", "lvds0";
+		};
+		mstp8_clks: mstp8_clks@e6150990 {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+			clocks = <&zx_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
+				 <&p_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_IPMMU_SGX R8A7793_CLK_VIN2
+				R8A7793_CLK_VIN1 R8A7793_CLK_VIN0
+				R8A7793_CLK_ETHER R8A7793_CLK_SATA1
+				R8A7793_CLK_SATA0
+			>;
+			clock-output-names =
+				"ipmmu_sgx", "vin2", "vin1", "vin0", "ether",
+				"sata1", "sata0";
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
new file mode 100644
index 000000000000..d4dd5a30ccdf
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -0,0 +1,102 @@
+/*
+ * Device Tree Source for the SILK board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014-2015 Renesas Solutions Corp.
+ * Copyright (C) 2014-2015 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+
+/ {
+	model = "SILK";
+	compatible = "renesas,silk", "renesas,r8a7794";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = &scif2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif2_pins: serial2 {
+		renesas,groups = "scif2_data";
+		renesas,function = "scif2";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq8";
+		renesas,function = "intc";
+	};
+
+	mmcif0_pins: mmcif0 {
+		renesas,groups = "mmc_data8", "mmc_ctrl";
+		renesas,function = "mmc";
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&d3_3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index b73819423311..97c8e9ace5eb 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -39,7 +39,7 @@
 	};
 
 	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a7-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
@@ -57,6 +57,7 @@
 			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		renesas,channels-mask = <0x60>;
 
@@ -76,6 +77,7 @@
 			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		renesas,channels-mask = <0xff>;
 
@@ -106,6 +108,13 @@
 			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	pfc: pin-controller@e6060000 {
+		compatible = "renesas,pfc-r8a7794";
+		reg = <0 0xe6060000 0 0x11c>;
+		#gpio-range-cells = <3>;
 	};
 
 	dmac0: dma-controller@e6700000 {
@@ -134,6 +143,7 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
@@ -164,6 +174,7 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
@@ -176,6 +187,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -187,6 +199,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -198,6 +211,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -209,6 +223,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -220,6 +235,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -231,6 +247,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -242,6 +259,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -253,6 +271,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -264,6 +283,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -275,6 +295,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -286,6 +307,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -297,6 +319,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -308,6 +331,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -319,6 +343,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -330,6 +355,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -341,6 +367,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -352,6 +379,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -363,6 +391,7 @@
 		clock-names = "sci_ick";
 		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
 		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -371,17 +400,31 @@
 		reg = <0 0xee700000 0 0x400>;
 		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7794_CLK_ETHER>;
+		power-domains = <&cpg_clocks>;
 		phy-mode = "rmii";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
 	};
 
+	mmcif0: mmc@ee200000 {
+		compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a7794";
 		reg = <0 0xee100000 0 0x200>;
 		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -390,6 +433,7 @@
 		reg = <0 0xee140000 0 0x100>;
 		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -398,6 +442,7 @@
 		reg = <0 0xee160000 0 0x100>;
 		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -424,6 +469,7 @@
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
 					     "lb", "qspi", "sdh", "sd0", "z";
+			#power-domain-cells = <0>;
 		};
 		/* Variable factor clocks */
 		sd2_clk: sd2_clk@e6150078 {
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index b299b26926d4..c0273755431a 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -49,6 +49,7 @@
 	compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
 
 	memory {
+		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
 
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index 0a7304beb417..bae965c123c1 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -48,6 +48,7 @@
 	compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
 
 	memory {
+		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
 
@@ -201,6 +202,18 @@
 	status = "okay";
 };
 
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
 &wdt {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 3ac151102c2f..e36383c701dc 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -48,6 +48,7 @@
 	compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
 
 	memory {
+		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
 
@@ -459,6 +460,10 @@
 	status = "okay";
 };
 
+&usbphy {
+	status = "okay";
+};
+
 &usb_otg {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index d32229b8a996..946f18705e96 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -169,6 +169,28 @@
 		clock-names = "timer", "pclk";
 	};
 
+	usbphy: phy {
+		compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		usbphy0: usb-phy0 {
+			#phy-cells = <0>;
+			reg = <0x17c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+		};
+
+		usbphy1: usb-phy1 {
+			#phy-cells = <0>;
+			reg = <0x188>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+		};
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3066a-pinctrl";
 		rockchip,grf = <&grf>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 42faa19edb7e..d2180e5d2b05 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -48,6 +48,7 @@
 	compatible = "radxa,rock", "rockchip,rk3188";
 
 	memory {
+		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
 	};
 
@@ -358,6 +359,10 @@
 	status = "okay";
 };
 
+&usbphy {
+	status = "okay";
+};
+
 &usb_host {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 0f23aedf9349..316304272118 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -130,6 +130,28 @@
 		#reset-cells = <1>;
 	};
 
+	usbphy: phy {
+		compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		usbphy0: usb-phy0 {
+			#phy-cells = <0>;
+			reg = <0x10c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+		};
+
+		usbphy1: usb-phy1 {
+			#phy-cells = <0>;
+			reg = <0x11c>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+		};
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3188-pinctrl";
 		rockchip,grf = <&grf>;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 844a6fb64658..f6d2e7894b05 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -43,6 +43,7 @@
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0x0 0x80000000>;
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 0b42372e4379..20fa0ef0b96b 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -44,6 +44,7 @@
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0 0x80000000>;
 	};
 
@@ -213,6 +214,8 @@
 		regulator-max-microvolt = <1350000>;
 		regulator-always-on;
 		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-ramp-delay = <8000>;
 		vin-supply = <&vcc_sys>;
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index d582811fbd7b..f82b956ebf17 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -49,6 +49,7 @@
 	compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
 
 	memory{
+		device_type = "memory";
 		reg = <0 0x80000000>;
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
new file mode 100644
index 000000000000..14b9fc73c8a4
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -0,0 +1,413 @@
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+	compatible = "netxeon,r89", "rockchip,rk3288";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		button@0 {
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			gpio-key,wakeup = <1>;
+			debounce-interval = <100>;
+		};
+	};
+
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_otg: vcc-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sdmmc: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sys-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: pmic@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "VDD_CPU";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: pmic@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "VDD_GPU";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+	};
+
+	act8846: pmic@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
+		system-power-controller;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_wl: REG7 {
+				regulator-name = "VCC_WL";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "VCCA_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "VCC_LAN";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sdmmc>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
new file mode 100644
index 000000000000..136d650dd05f
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -0,0 +1,232 @@
+/*
+ * Google Veyron (and derivatives) board device tree source
+ * Chromebook specific parts
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-sdmmc.dtsi"
+
+/ {
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = &i2c_tunnel;
+	};
+
+	gpio-charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ac_present_ap>;
+	};
+
+	/* A non-regulated voltage from power supply or battery */
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vccsys";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc33_sys: vcc33-sys {
+		vin-supply = <&vccsys>;
+	};
+
+	vcc_5v: vcc-5v {
+		vin-supply = <&vccsys>;
+	};
+
+	/* This turns on vbus for host1 (dwc2) */
+	vcc5_host1: vcc5-host1-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host1_pwr_en>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This turns on vbus for otg for host mode (dwc2) */
+	vcc5v_otg: vcc5v-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbotg_pwren_h>;
+		regulator-name = "vcc5_host2";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&gpio_keys {
+	pinctrl-0 = <&pwr_key_l &ap_lid_int_l>;
+	lid {
+		label = "Lid";
+		gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		gpio-key,wakeup;
+		linux,code = <0>; /* SW_LID */
+		linux,input-type = <5>; /* EV_SW */
+		debounce-interval = <1>;
+	};
+};
+
+&rk808 {
+	vcc11-supply = <&vcc_5v>;
+
+	regulators {
+		vcc33_ccd: LDO_REG8 {
+			regulator-name = "vcc33_ccd";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		google,cros-ec-spi-pre-delay = <30>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_int>;
+		spi-max-frequency = <3000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int>;
+		vcc-supply = <&vcc33_io>;
+		wakeup-source;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+	>;
+
+	buttons {
+		ap_lid_int_l: ap-lid-int-l {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	charger {
+		ac_present_ap: ac-present-ap {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	cros-ec {
+		ec_int: ec-int {
+			rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	suspend {
+		suspend_l_wake: suspend-l-wake {
+			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		suspend_l_sleep: suspend-l-sleep {
+			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	trackpad {
+		trackpad_int: trackpad-int {
+			rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb-host {
+		host1_pwr_en: host1-pwr-en {
+			rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbotg_pwren_h: usbotg-pwren-h {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
new file mode 100644
index 000000000000..60bd6e91e308
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -0,0 +1,197 @@
+/*
+ * Google Veyron Jerry Rev 3+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Jerry";
+	compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+		     "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
+		     "google,veyron-jerry-rev3", "google,veyron-jerry",
+		     "google,veyron", "rockchip,rk3288";
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l>;
+
+	regulators {
+		mic_vcc: LDO_REG2 {
+			regulator-name = "mic_vcc";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/*
+	 * Trackpad pin control is shared between Elan and Synaptics devices
+	 * so we have to pull it up to the bus level.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_xfer &trackpad_int>;
+
+	trackpad@15 {
+		/*
+		 * Remove the inherited pinctrl settings to avoid clashing
+		 * with bus-wide ones.
+		 */
+		/delete-property/pinctrl-names;
+		/delete-property/pinctrl-0;
+	};
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		interrupt-parent = <&gpio7>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x2c>;
+		hid-descr-addr = <0x0020>;
+		vcc-supply = <&vcc33_io>;
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
new file mode 100644
index 000000000000..8fd8ef2c72da
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -0,0 +1,230 @@
+/*
+ * Google Veyron Minnie Rev 0+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+
+/ {
+	model = "Google Minnie";
+	compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+		     "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+		     "google,veyron-minnie-rev0", "google,veyron-minnie",
+		     "google,veyron", "rockchip,rk3288";
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+};
+
+&gpio_keys {
+	pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
+
+	volum_down {
+		label = "Volum_down";
+		gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_VOLUMEDOWN>;
+		debounce-interval = <100>;
+	};
+
+	volum_up {
+		label = "Volum_up";
+		gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_VOLUMEUP>;
+		debounce-interval = <100>;
+	};
+};
+
+&i2c_tunnel {
+	battery: bq27500@55 {
+		compatible = "ti,bq27500";
+		reg = <0x55>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+
+	regulators {
+		vcc33_touch: LDO_REG2 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "vcc33_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		vcc5v_touch: SWITCH_REG2 {
+			regulator-name = "vcc5v_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		volum_down_l: volum-down-l {
+			rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		volum_up_l: volum-up-l {
+			rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	prochot {
+		gpio_prochot: gpio-prochot {
+			rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touchscreen {
+		touch_int: touch-int {
+			rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		touch_rst: touch-rst {
+			rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
new file mode 100644
index 000000000000..94b56e33d947
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -0,0 +1,128 @@
+/*
+ * Google Veyron Pinky Rev 2 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Pinky";
+	compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+		     "google,veyron", "rockchip,rk3288";
+
+	/delete-node/emmc-pwrseq;
+};
+
+&emmc {
+	/*
+	 * Use a pullup instead of a drive since the output is 3.3V and
+	 * really should be 1.8V (oops).  The external pulldown will help
+	 * bring the voltage down if we only drive with a pullup here.
+	 * Therefore disable the powerseq (and actual reset) for pinky.
+	 */
+	/delete-property/mmc-pwrseq;
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>;
+};
+
+&gpio_keys {
+	pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
+
+	power {
+		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* Touchpad connector */
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+};
+
+&pinctrl {
+	buttons {
+		pwr_key_h: pwr-key-h {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_wp_gpio: sdmmc-wp-gpio {
+			rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&rk808 {
+	regulators {
+		vcc18_lcd: SWITCH_REG2 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-name = "vcc18_lcd";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+		     &sdmmc_wp_gpio &sdmmc_bus4>;
+	wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+};
+
+&tsadc {
+	/* Some connection is flaky making the tsadc hang the system */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
new file mode 100644
index 000000000000..b5334ecff13c
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -0,0 +1,122 @@
+/*
+ * Google Veyron (and derivatives) fragment for sdmmc cards
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&io_domains {
+	sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+	sdmmc {
+		/*
+		 * We run sdmmc at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		/*
+		 * Builtin CD line is hooked to ground to prevent JTAG at boot
+		 * (and also to get the voltage rail correct).
+		 * Configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't
+		 * think there's a card inserted
+		 */
+		sdmmc_cd_disabled: sdmmc-cd-disabled {
+			rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* This is where we actually hook up CD */
+		sdmmc_cd_gpio: sdmmc-cd-gpio {
+			rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk808 {
+	vcc9-supply = <&vcc_5v>;
+
+	regulators {
+		vccio_sd: LDO_REG4 {
+			regulator-name = "vccio_sd";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		vcc33_sd: LDO_REG5 {
+			regulator-name = "vcc33_sd";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	status = "okay";
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+	num-slots = <1>;
+	vmmc-supply = <&vcc33_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
new file mode 100644
index 000000000000..a7ea7d06cf7f
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -0,0 +1,155 @@
+/*
+ * Google Veyron Speedy Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Speedy";
+	compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
+		     "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
+		     "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
+		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
+		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l>;
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
new file mode 100644
index 000000000000..2fa7a0dc83f7
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -0,0 +1,563 @@
+/*
+ * Google Veyron (and derivatives) board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_l>;
+		power {
+			label = "Power";
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			gpio-key,wakeup;
+		};
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_warm_reset_h>;
+		priority = <200>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	io_domains: io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		bb-supply = <&vcc33_io>;
+		dvp-supply = <&vcc_18>;
+		flash0-supply = <&vcc18_flashio>;
+		gpio1830-supply = <&vcc33_io>;
+		gpio30-supply = <&vcc33_io>;
+		lcdc-supply = <&vcc33_lcd>;
+		wifi-supply = <&vcc18_wl>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 RK808_CLKOUT1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_5v: vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc33_sys: vcc33-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc50_hdmi: vcc50-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc50_hdmi";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_5v>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	status = "okay";
+
+	broken-cd;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 2.5ns measured */
+	i2c-scl-rising-time-ns = <100>;		/* 45ns measured */
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		clock-output-names = "xin32k", "wifibt_32kin";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		vcc1-supply = <&vcc33_sys>;
+		vcc2-supply = <&vcc33_sys>;
+		vcc3-supply = <&vcc33_sys>;
+		vcc4-supply = <&vcc33_sys>;
+		vcc6-supply = <&vcc_5v>;
+		vcc7-supply = <&vcc33_sys>;
+		vcc8-supply = <&vcc33_sys>;
+		vcc12-supply = <&vcc_18>;
+		vddio-supply = <&vcc33_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc135_ddr: DCDC_REG3 {
+				regulator-name = "vcc135_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/*
+			 * vcc_18 has several aliases.  (vcc18_flashio and
+			 * vcc18_wl).  We'll add those aliases here just to
+			 * make it easier to follow the schematic.  The signals
+			 * are actually hooked together and only separated for
+			 * power measurement purposes).
+			 */
+			vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/*
+			 * Note that both vcc33_io and vcc33_pmuio are always
+			 * powered together. To simplify the logic in the dts
+			 * we just refer to vcc33_io every time something is
+			 * powered from vcc33_pmuio. In fact, on later boards
+			 * (such as danger) they're the same net.
+			 */
+			vcc33_io: LDO_REG1 {
+				regulator-name = "vcc33_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd10_lcd_pwren_h: LDO_REG7 {
+				regulator-name = "vdd10_lcd_pwren_h";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc33_lcd: SWITCH_REG1 {
+				regulator-name = "vcc33_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 2.5ns measured */
+	i2c-scl-rising-time-ns = <100>;		/* 40ns measured */
+
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+		powered-while-suspended;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* 100kHz since 4.7k resistors don't rise fast enough */
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <50>;		/* 10ns measured */
+	i2c-scl-rising-time-ns = <800>;		/* 600ns measured */
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 11ns measured */
+	i2c-scl-rising-time-ns = <300>;		/* 225ns measured */
+};
+
+&i2c5 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <300>;
+	i2c-scl-rising-time-ns = <1000>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sdio0 {
+	status = "okay";
+
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+	vmmc-supply = <&vcc33_sys>;
+	vqmmc-supply = <&vcc18_wl>;
+};
+
+&spi2 {
+	status = "okay";
+
+	rx-sample-delay-ns = <12>;
+};
+
+&tsadc {
+	status = "okay";
+
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
+&uart0 {
+	status = "okay";
+
+	/* We need to go faster than 24MHz, so adjust clock parents / rates */
+	assigned-clocks = <&cru SCLK_UART0>;
+	assigned-clock-rates = <48000000>;
+
+	/* Pins don't include flow control by default; add that in */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+
+	needs-reset-on-resume;
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+
+	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
+	assigned-clock-parents = <&cru SCLK_OTGPHY0>;
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&global_pwroff
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&global_pwroff
+	>;
+
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	buttons {
+		pwr_key_l: pwr-key-l {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/*
+		 * We run eMMC at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		emmc_clk: emmc-clk {
+			rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc_cmd: emmc-cmd {
+			rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	reboot {
+		ap_warm_reset_h: ap-warm-reset-h {
+			rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	recovery-switch {
+		rec_mode_l: rec-mode-l {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio0 {
+		wifi_enable_h: wifienable-h {
+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* NOTE: mislabelled on schematic; should be bt_enable_h */
+		bt_enable_l: bt-enable-l {
+			rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/*
+		 * We run sdio0 at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdio0_bus4: sdio0-bus4 {
+			rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdio0_cmd: sdio0-cmd {
+			rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdio0_clk: sdio0-clk {
+			rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+	};
+
+	tpm {
+		tpm_int_h: tpm-int-h {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	/*
+	 * On Marvell-based hardware this is a no-connect.  Make sure we enable
+	 * the pullup so that the line doesn't float.  The pullup shouldn't
+	 * hurt on Broadcom-based hardware since the other side is actively
+	 * driving this signal.  As proof: we've already got a pullup on RX.
+	 */
+	uart0 {
+		uart0_cts: uart0-cts {
+			rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
+		};
+	};
+
+	write-protect {
+		fw_wp_ap: fw-wp-ap {
+			rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 22316d00493e..906e938fb6bf 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -78,6 +78,7 @@
 			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 	};
 
 	cpus {
@@ -110,19 +111,19 @@
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 		};
-		cpu@501 {
+		cpu1: cpu@501 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a12";
 			reg = <0x501>;
 			resets = <&cru SRST_CORE1>;
 		};
-		cpu@502 {
+		cpu2: cpu@502 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a12";
 			reg = <0x502>;
 			resets = <&cru SRST_CORE2>;
 		};
-		cpu@503 {
+		cpu3: cpu@503 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a12";
 			reg = <0x503>;
@@ -168,6 +169,26 @@
 		};
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * The rk3288 cannot use the memory area above 0xfe000000
+		 * for dma operations for some reason. While there is
+		 * probably a better solution available somewhere, we
+		 * haven't found it yet and while devices with 2GB of ram
+		 * are not affected, this issue prevents 4GB from booting.
+		 * So to make these devices at least bootable, block
+		 * this area for the time being until the real solution
+		 * is found.
+		 */
+		dma-unusable@fe000000 {
+			reg = <0xfe000000 0x1000000>;
+		};
+	};
+
 	xin24m: oscillator {
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
@@ -447,6 +468,8 @@
 			"mac_clk_rx", "mac_clk_tx",
 			"clk_mac_ref", "clk_mac_refout",
 			"aclk_mac", "pclk_mac";
+		resets = <&cru SRST_MAC>;
+		reset-names = "stmmaceth";
 		status = "disabled";
 	};
 
@@ -626,7 +649,7 @@
 		compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
 		reg = <0xff800000 0x100>;
 		clocks = <&cru PCLK_WDT>;
-		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index a2ae9f32464d..4497d288a7cb 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -172,6 +172,13 @@
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_OTG0>;
 		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		g-use-dma;
+		phys = <&usbphy0>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -181,6 +188,9 @@
 		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_OTG1>;
 		clock-names = "otg";
+		dr_mode = "host";
+		phys = <&usbphy1>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
new file mode 100644
index 000000000000..034cd48ae28b
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -0,0 +1,926 @@
+/*
+ * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel SAMA5D2 family SoC";
+	compatible = "atmel,sama5d2";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart3;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	ns_sram: sram@00200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x20000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: gadget@00300000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00300000 0x100000
+			       0xfc02c000 0x400>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&udphs_clk>, <&utmi>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+
+			ep0 {
+				reg = <0>;
+				atmel,fifo-size = <64>;
+				atmel,nb-banks = <1>;
+			};
+
+			ep1 {
+				reg = <1>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep2 {
+				reg = <2>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep3 {
+				reg = <3>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep4 {
+				reg = <4>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep5 {
+				reg = <5>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep6 {
+				reg = <6>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep7 {
+				reg = <7>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep8 {
+				reg = <8>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep9 {
+				reg = <9>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep10 {
+				reg = <10>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep11 {
+				reg = <11>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep12 {
+				reg = <12>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep13 {
+				reg = <13>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep14 {
+				reg = <14>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep15 {
+				reg = <15>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+		};
+
+		usb1: ohci@00400000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00400000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@00500000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@00a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ramc0: ramc@f000c000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf000c000 0x200>;
+				clocks = <&ddrck>, <&mpddr_clk>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0010000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0010000 0x1000>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: pmc@f0014000 {
+				compatible = "atmel,sama5d2-pmc";
+				reg = <0xf0014000 0x160>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <100000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc &main_osc>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,sama5d3-clk-pll";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <12000000 12000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <124000000 166000000>;
+					atmel,clk-divisors = <1 2 4 3>;
+				};
+
+				h32ck: h32mxck {
+					#clock-cells = <0>;
+					compatible = "atmel,sama5d4-clk-h32mx";
+					clocks = <&mck>;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: prog2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					lcdck: lcdck {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck2 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+
+					iscck: iscck {
+						#clock-cells = <0>;
+						reg = <18>;
+						clocks = <&mck>;
+					};
+				};
+
+				periph32ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&h32ck>;
+
+					macb0_clk: macb0_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tdes_clk: tdes_clk {
+						#clock-cells = <0>;
+						reg = <11>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					matrix1_clk: matrix1_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					hsmc_clk: hsmc_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					pioA_clk: pioA_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx0_clk: flx0_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx1_clk: flx1_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx2_clk: flx2_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx3_clk: flx3_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx4_clk: flx4_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart0_clk: uart0_clk {
+						#clock-cells = <0>;
+						reg = <24>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart1_clk: uart1_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart2_clk: uart2_clk {
+						#clock-cells = <0>;
+						reg = <26>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart3_clk: uart3_clk {
+						#clock-cells = <0>;
+						reg = <27>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart4_clk: uart4_clk {
+						#clock-cells = <0>;
+						reg = <28>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <29>;
+						#clock-cells = <0>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <30>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <33>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <34>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tcb0_clk: tcb0_clk {
+						#clock-cells = <0>;
+						reg = <35>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tcb1_clk: tcb1_clk {
+						#clock-cells = <0>;
+						reg = <36>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <38>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <40>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uhphs_clk: uhphs_clk {
+						#clock-cells = <0>;
+						reg = <41>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <42>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <43>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					ssc1_clk: ssc1_clk {
+						#clock-cells = <0>;
+						reg = <44>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					trng_clk: trng_clk {
+						#clock-cells = <0>;
+						reg = <47>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					classd_clk: classd_clk {
+						#clock-cells = <0>;
+						reg = <59>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+				};
+
+				periph64ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					dma1_clk: dma1_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					aes_clk: aes_clk {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					aesb_clk: aesb_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					sha_clk: sha_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					mpddr_clk: mpddr_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					matrix0_clk: matrix0_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					sdmmc0_hclk: sdmmc0_hclk {
+						#clock-cells = <0>;
+						reg = <31>;
+					};
+
+					sdmmc1_hclk: sdmmc1_hclk {
+						#clock-cells = <0>;
+						reg = <32>;
+					};
+
+					lcdc_clk: lcdc_clk {
+						#clock-cells = <0>;
+						reg = <45>;
+					};
+
+					isc_clk: isc_clk {
+						#clock-cells = <0>;
+						reg = <46>;
+					};
+
+					qspi0_clk: qspi0_clk {
+						#clock-cells = <0>;
+						reg = <52>;
+					};
+
+					qspi1_clk: qspi1_clk {
+						#clock-cells = <0>;
+						reg = <53>;
+					};
+				};
+			};
+
+			sha@f0028000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf0028000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx";
+				clocks = <&sha_clk>;
+				clock-names = "sha_clk";
+				status = "disabled";
+			};
+
+			aes@f002c000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf002c000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&aes_clk>;
+				clock-names = "aes_clk";
+				status = "disabled";
+			};
+
+			spi0: spi@f8000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8000000 0x100>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			macb0: ethernet@f8008000 {
+				compatible = "atmel,sama5d2-gem";
+				reg = <0xf8008000 0x1000>;
+				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
+					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
+					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf800c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f8010000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8010000 0x100>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			uart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&uart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xf8028000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			pit: timer@f8048030 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xf8048030 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&h32ck>;
+			};
+
+			sckc@f8048050 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xf8048050 0x4>;
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <250000000>;
+					atmel,startup-time-usec = <75>;
+				};
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+					atmel,startup-time-usec = <1200000>;
+				};
+
+				clk32k: slowck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
+			rtc@f80480b0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xf80480b0 0x30>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			spi1: spi@fc000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc000000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&uart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart4: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&uart4_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@fc020000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d2-aic";
+				interrupt-controller;
+				reg = <0xfc020000 0x200>;
+				atmel,external-irqs = <49>;
+			};
+
+			i2c1: i2c@fc028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xfc028000 0x100>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi1_clk>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 9e2444b07bce..7fa276515f11 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -145,8 +145,8 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf0010000 0x100>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			i2c0: i2c@f0014000 {
@@ -1259,13 +1259,15 @@
 			};
 
 			rstc@fffffe00 {
-				compatible = "atmel,at91sam9g45-rstc";
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shutdown-controller@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffe30 {
@@ -1279,6 +1281,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -1315,6 +1318,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffeb0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index f7fa58fe09f1..801f9745e82f 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -31,8 +31,8 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8014000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb1_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 3ee22ee13c5a..8d1de29e8da1 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -957,8 +957,8 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf801c000 0x100>;
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			macb0: ethernet@f8020000 {
@@ -1185,29 +1185,20 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xfc020000 0x100>;
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb1_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			adc0: adc@fc034000 {
 				compatible = "atmel,at91sam9x5-adc";
 				reg = <0xfc034000 0x100>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					/* external trigger is conflict with USBA_VBUS */
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					>;
 				clocks = <&adc_clk>,
 					 <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-channels-used = <0x01f>;
 				atmel,adc-startup-time = <40>;
-				atmel,adc-use-external;
+				atmel,adc-use-external-triggers;
 				atmel,adc-vref = <3000>;
 				atmel,adc-res = <8 10>;
 				atmel,adc-sample-hold-time = <11>;
@@ -1277,13 +1268,15 @@
 			};
 
 			rstc@fc068600 {
-				compatible = "atmel,at91sam9g45-rstc";
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfc068600 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shdwc@fc068610 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfc068610 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fc068630 {
@@ -1296,6 +1289,7 @@
 			watchdog@fc068640 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfc068640 0x10>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
@@ -1329,6 +1323,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfc0686b0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 			};
 
 			dbgu: serial@fc069000 {
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 11e17c5f26e2..ff7c8f298f30 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -392,6 +392,9 @@
 		      <0xe605801c 0x1c>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-ranges =
+			<&pfc 0 0 119>, <&pfc 128 128 37>, <&pfc 192 192 91>,
+			<&pfc 288 288 22>;
 		interrupts-extended =
 			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
 			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 80f924deed37..314e589cfa00 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -164,7 +164,7 @@
 						dbg_base_clk: dbg_base_clk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
+							clocks = <&main_pll>, <&osc1>;
 							div-reg = <0xe8 0 9>;
 							reg = <0x50>;
 						};
@@ -318,7 +318,7 @@
 					l3_sp_clk: l3_sp_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>;
+						clocks = <&l3_mp_clk>;
 						div-reg = <0x64 2 2>;
 					};
 
@@ -349,7 +349,7 @@
 					dbg_clk: dbg_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
-						clocks = <&dbg_base_clk>;
+						clocks = <&dbg_at_clk>;
 						div-reg = <0x68 2 2>;
 						clk-gate = <0x60 5>;
 					};
@@ -481,8 +481,37 @@
 						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
 						clk-gate = <0xa0 11>;
 					};
+
+					ddr_dqs_clk_gate: ddr_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dqs_clk>;
+						clk-gate = <0xd8 0>;
+					};
+
+					ddr_2x_dqs_clk_gate: ddr_2x_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_2x_dqs_clk>;
+						clk-gate = <0xd8 1>;
+					};
+
+					ddr_dq_clk_gate: ddr_dq_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dq_clk>;
+						clk-gate = <0xd8 2>;
+					};
+
+					h2f_user2_clk: h2f_user2_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr2_clk>;
+						clk-gate = <0xd8 3>;
+					};
+
 				};
-			};
+		};
 
 		gmac0: ethernet@ff700000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
@@ -565,7 +594,7 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff708000 0x1000>;
-			clocks = <&per_base_clk>;
+			clocks = <&l4_mp_clk>;
 			status = "disabled";
 
 			porta: gpio-controller@0 {
@@ -585,7 +614,7 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff709000 0x1000>;
-			clocks = <&per_base_clk>;
+			clocks = <&l4_mp_clk>;
 			status = "disabled";
 
 			portb: gpio-controller@0 {
@@ -605,7 +634,7 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff70a000 0x1000>;
-			clocks = <&per_base_clk>;
+			clocks = <&l4_mp_clk>;
 			status = "disabled";
 
 			portc: gpio-controller@0 {
@@ -639,6 +668,8 @@
 			cache-level = <2>;
 			arm,tag-latency = <1 1 1>;
 			arm,data-latency = <2 1 1>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
 		};
 
 		mmc: dwmmc0@ff704000 {
@@ -752,6 +783,7 @@
 			#reset-cells = <1>;
 			compatible = "altr,rst-mgr";
 			reg = <0xffd05000 0x1000>;
+			altr,modrst-offset = <0x10>;
 		};
 
 		usbphy0: usbphy@0 {
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 4779b07310df..2340fcb2b535 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -16,11 +16,17 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
 
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -409,6 +415,8 @@
 			rx-fifo-depth = <16384>;
 			clocks = <&l4_mp_clk>;
 			clock-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -426,6 +434,8 @@
 			rx-fifo-depth = <16384>;
 			clocks = <&l4_mp_clk>;
 			clock-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -588,6 +598,7 @@
 			#reset-cells = <1>;
 			compatible = "altr,rst-mgr";
 			reg = <0xffd05000 0x100>;
+			altr,modrst-offset = <0x20>;
 		};
 
 		scu: snoop-control-unit@ffffc000 {
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 94a0709b2fe6..99aa9a1c8af0 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -21,7 +21,8 @@
 	compatible = "altr,socfpga-arria10", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 rootwait";
+		bootargs = "earlyprintk";
+		stdout-path = "serial1:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index ccaf41742fc3..a75a666032b2 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -22,7 +22,8 @@
 	compatible = "altr,socfpga-arria5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
new file mode 100644
index 000000000000..555e9caf21e1
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic DE-0(Atlas)";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 24 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	txd0-skew-ps = <0>; /* -420ps */
+	txd1-skew-ps = <0>; /* -420ps */
+	txd2-skew-ps = <0>; /* -420ps */
+	txd3-skew-ps = <0>; /* -420ps */
+	rxd0-skew-ps = <420>; /* 0ps */
+	rxd1-skew-ps = <420>; /* 0ps */
+	rxd2-skew-ps = <420>; /* 0ps */
+	rxd3-skew-ps = <420>; /* 0ps */
+	txen-skew-ps = <0>; /* -420ps */
+	txc-skew-ps = <1860>; /* 960ps */
+	rxdv-skew-ps = <420>; /* 0ps */
+	rxc-skew-ps = <1680>; /* 780ps */
+
+	max-frame-size = <3800>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	speed-mode = <0>;
+
+	adxl345: adxl345@0 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 258865da8f6a..d4d0a28fb331 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -22,7 +22,8 @@
 	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 5e17fd147728..48bf651bd762 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -22,7 +22,8 @@
 	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index e65744fc12ab..ad45f5e8fac7 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -134,7 +134,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
@@ -143,7 +143,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index eab3477e0a0e..ae0527754000 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -22,11 +22,15 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
 		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
 		};
 	};
 
@@ -65,6 +69,17 @@
 		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	pwm_regulator: pwm-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 3 8448>;
+		regulator-name = "CPU_1V0_AVS";
+		regulator-min-microvolt = <784000>;
+		regulator-max-microvolt = <1299000>;
+		regulator-always-on;
+		max-duty-cycle = <255>;
+		status = "okay";
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -539,6 +554,7 @@
 			status = "disabled";
 		};
 
+
 		st_dwc3: dwc3@8f94000 {
 			compatible	= "st,stih407-dwc3";
 			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
@@ -565,5 +581,34 @@
 						  <&phy_port2 PHY_TYPE_USB3>;
 			};
 		};
+
+		/* COMMS PWM Module */
+		pwm0: pwm@9810000 {
+			compatible	= "st,sti-pwm";
+			status		= "okay";
+			#pwm-cells	= <2>;
+			reg		= <0x9810000 0x68>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <1>;
+		};
+
+		/* SBC PWM Module */
+		pwm1: pwm@9510000 {
+			compatible	= "st,sti-pwm";
+			status		= "okay";
+			#pwm-cells	= <2>;
+			reg		= <0x9510000 0x68>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm1_chan0_default
+					&pinctrl_pwm1_chan1_default
+					&pinctrl_pwm1_chan2_default
+					&pinctrl_pwm1_chan3_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <4>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 0a754f275212..1683debd0854 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -439,6 +439,194 @@
 					};
 				};
 			};
+
+			tsin0 {
+				pinctrl_tsin0_parallel: tsin0_parallel {
+					st,pins {
+						DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio10 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio10 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio10 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio11 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio11 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio11 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio11 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin0_serial: tsin0_serial {
+					st,pins {
+						DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin1 {
+				pinctrl_tsin1_parallel: tsin1_parallel {
+					st,pins {
+						DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin1_serial: tsin1_serial {
+					st,pins {
+						DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin2 {
+				pinctrl_tsin2_parallel: tsin2_parallel {
+					st,pins {
+						DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio13 5 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA5 = <&pio13 6 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA4 = <&pio13 7 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA3 = <&pio14 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio14 1 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA1 = <&pio14 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio14 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin2_serial: tsin2_serial {
+					st,pins {
+						DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin3 {
+				pinctrl_tsin3_serial: tsin3_serial {
+					st,pins {
+						DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin4 {
+				pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 {
+					st,pins {
+						DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+						ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+						PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin5 {
+				pinctrl_tsin5_serial_alt1: tsin5_serial_alt1 {
+					st,pins {
+						DATA7 = <&pio18 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio18 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio18 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio18 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio18 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin5_serial_alt2: tsin5_serial_alt2 {
+					st,pins {
+						DATA7 = <&pio19 4 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio19 3 ALT2 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio19 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio19 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio19 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsout0 {
+				pinctrl_tsout0_parallel: tsout0_parallel {
+					st,pins {
+						DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+						VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsout0_serial: tsout0_serial {
+					st,pins {
+						DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+						VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsout1 {
+				pinctrl_tsout1_serial: tsout1_serial {
+					st,pins {
+						DATA7 = <&pio19 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio19 3 ALT1 OUT NICLK 0 CLK_A>;
+						VALID = <&pio19 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio19 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio19 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			mtsin0 {
+				pinctrl_mtsin0_parallel: mtsin0_parallel {
+					st,pins {
+						DATA7 = <&pio10 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio10 5 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio10 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio10 7 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio11 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio11 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio11 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio11 3 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT3 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
 		};
 
 		pin-controller-front1 {
@@ -452,6 +640,18 @@
 			interrupts-names = "irqmux";
 			ranges = <0 0x09210000 0x10000>;
 
+			tsin4 {
+				pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
+					st,pins {
+						DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
 			pio20: pio@09210000 {
 				gpio-controller;
 				#gpio-cells = <1>;
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 2c560fc30503..3efa3b2ebe90 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -147,33 +147,5 @@
 				};
 			};
 		};
-
-		/* COMMS PWM Module */
-		pwm0: pwm@9810000 {
-			compatible	= "st,sti-pwm";
-			status		= "disabled";
-			#pwm-cells	= <2>;
-			reg		= <0x9810000 0x68>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
-		};
-
-		/* SBC PWM Module */
-		pwm1: pwm@9510000 {
-			compatible	= "st,sti-pwm";
-			status		= "disabled";
-			#pwm-cells	= <2>;
-			reg		= <0x9510000 0x68>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm1_chan0_default
-					&pinctrl_pwm1_chan1_default
-					&pinctrl_pwm1_chan2_default
-					&pinctrl_pwm1_chan3_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
-			st,pwm-num-chan = <4>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 6b5803a30096..d1f2acafc9b6 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -137,7 +137,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
@@ -146,7 +146,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 208b5e89036a..6f40bc99c22f 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -10,6 +10,10 @@
 #include "stih407-family.dtsi"
 #include "stih410-pinctrl.dtsi"
 / {
+	aliases {
+		bdisp0 = &bdisp0;
+	};
+
 	soc {
 		usb2_picophy1: phy2 {
 			compatible = "st,stih407-usb2-phy";
@@ -218,5 +222,13 @@
 				};
 			};
 		};
+
+		bdisp0:bdisp@9f10000 {
+			compatible = "st,stih407-bdisp";
+			reg = <0x9f10000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
+			clock-names = "bdisp";
+			clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 0ab23daa2829..148e1772465f 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -137,7 +137,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
@@ -146,7 +146,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index 354d90f521b6..8160a75539a4 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -17,11 +17,15 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
 		};
 		cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
new file mode 100644
index 000000000000..6964fc9e97cf
--- /dev/null
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32429i-EVAL board";
+	compatible = "st,stm32429i-eval", "st,stm32f429";
+
+	chosen {
+		bootargs = "root=/dev/ram rdinit=/linuxrc";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0xc0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&usart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 6b9aa59d978a..f0b731db6f53 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -53,8 +53,8 @@
 	compatible = "st,stm32f429i-disco", "st,stm32f429";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc";
-		linux,stdout-path = &usart1;
+		bootargs = "root=/dev/ram rdinit=/linuxrc";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -66,6 +66,10 @@
 	};
 };
 
+&clk_hse {
+	clock-frequency = <8000000>;
+};
+
 &usart1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index aa73b4f4172c..d78a4815da8f 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -49,48 +49,10 @@
 
 / {
 	clocks {
-		clk_sysclk: clk-sysclk {
+		clk_hse: clk-hse {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <180000000>;
-		};
-
-		clk_hclk: clk-hclk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <180000000>;
-		};
-
-		clk_pclk1: clk-pclk1 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <45000000>;
-		};
-
-		clk_pclk2: clk-pclk2 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <90000000>;
-		};
-
-		clk_pmtr1: clk-pmtr1 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <90000000>;
-		};
-
-		clk_pmtr2: clk-pmtr2 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <180000000>;
-		};
-
-		clk_systick: clk-systick {
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_hclk>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
+			clock-frequency = <0>;
 		};
 	};
 
@@ -99,7 +61,7 @@
 			compatible = "st,stm32-timer";
 			reg = <0x40000000 0x400>;
 			interrupts = <28>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 128>;
 			status = "disabled";
 		};
 
@@ -107,7 +69,7 @@
 			compatible = "st,stm32-timer";
 			reg = <0x40000400 0x400>;
 			interrupts = <29>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 129>;
 			status = "disabled";
 		};
 
@@ -115,7 +77,7 @@
 			compatible = "st,stm32-timer";
 			reg = <0x40000800 0x400>;
 			interrupts = <30>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 130>;
 			status = "disabled";
 		};
 
@@ -123,14 +85,14 @@
 			compatible = "st,stm32-timer";
 			reg = <0x40000c00 0x400>;
 			interrupts = <50>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 131>;
 		};
 
 		timer6: timer@40001000 {
 			compatible = "st,stm32-timer";
 			reg = <0x40001000 0x400>;
 			interrupts = <54>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 132>;
 			status = "disabled";
 		};
 
@@ -138,7 +100,7 @@
 			compatible = "st,stm32-timer";
 			reg = <0x40001400 0x400>;
 			interrupts = <55>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 133>;
 			status = "disabled";
 		};
 
@@ -146,7 +108,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40004400 0x400>;
 			interrupts = <38>;
-			clocks = <&clk_pclk1>;
+			clocks =  <&rcc 0 145>;
 			status = "disabled";
 		};
 
@@ -154,7 +116,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40004800 0x400>;
 			interrupts = <39>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 146>;
 			status = "disabled";
 		};
 
@@ -162,7 +124,7 @@
 			compatible = "st,stm32-uart";
 			reg = <0x40004c00 0x400>;
 			interrupts = <52>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 147>;
 			status = "disabled";
 		};
 
@@ -170,7 +132,7 @@
 			compatible = "st,stm32-uart";
 			reg = <0x40005000 0x400>;
 			interrupts = <53>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 148>;
 			status = "disabled";
 		};
 
@@ -178,7 +140,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40007800 0x400>;
 			interrupts = <82>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 158>;
 			status = "disabled";
 		};
 
@@ -186,7 +148,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40007c00 0x400>;
 			interrupts = <83>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 159>;
 			status = "disabled";
 		};
 
@@ -194,7 +156,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40011000 0x400>;
 			interrupts = <37>;
-			clocks = <&clk_pclk2>;
+			clocks = <&rcc 0 164>;
 			status = "disabled";
 		};
 
@@ -202,13 +164,20 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40011400 0x400>;
 			interrupts = <71>;
-			clocks = <&clk_pclk2>;
+			clocks = <&rcc 0 165>;
 			status = "disabled";
 		};
+
+		rcc: rcc@40023810 {
+			#clock-cells = <2>;
+			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+			reg = <0x40023800 0x400>;
+			clocks = <&clk_hse>;
+		};
 	};
 };
 
 &systick {
-	clocks = <&clk_systick>;
+	clocks = <&rcc 1 0>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index 93d435670ef1..f3cb297fd1db 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -125,12 +125,21 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	usb2_vbus_pin_a: usb2_vbus_pin@0 {
 		allwinner,pins = "PH12";
 	};
 };
 
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -146,7 +155,13 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
index 5878a0b11f7b..143056872650 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -114,6 +114,30 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb2_vbus {
 	status = "okay";
 };
@@ -124,7 +148,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 9afb4e018593..046a84d9719d 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -155,6 +155,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_cubieboard: led_pins@0 {
 		allwinner,pins = "PH20", "PH21";
@@ -162,6 +166,13 @@
 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_ahci_5v {
@@ -216,7 +227,15 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
new file mode 100644
index 000000000000..985e15503378
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
@@ -0,0 +1,202 @@
+/*
+ * Copyright 2015 Josef Gajdusek <atx@atx.name>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Iteaduino Plus A10";
+	compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index ebe2a04ef649..a7dd86d30fa2 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -114,6 +114,15 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -128,7 +137,13 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index b64aa4eb071e..28e32ad705cd 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -150,6 +150,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
 		allwinner,pins = "PC3";
@@ -164,6 +168,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
 };
 
 &reg_ahci_5v {
@@ -172,6 +190,10 @@
 	status = "okay";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -186,7 +208,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio   = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply   = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index adaa57b7a943..1f3c51a08113 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -646,6 +646,19 @@
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@01c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ahb_gates 0>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
 		usbphy: phy@01c13400 {
 			#phy-cells = <1>;
 			compatible = "allwinner,sun4i-a10-usb-phy";
@@ -756,8 +769,7 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			pwm0_pins_a: pwm0@0 {
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index a7e19e4847f7..5a422c1ff725 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -96,8 +96,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
+
+	axp152: pmic@30 {
+		reg = <0x30>;
+		interrupts = <0>;
+	};
 };
 
+#include "axp152.dtsi"
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_a>;
@@ -189,6 +196,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
 		allwinner,pins = "PG1";
@@ -217,6 +228,18 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG12";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
 };
 
 &reg_usb1_vbus {
@@ -243,8 +266,20 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG11";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
-
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
index 990f9d61ae4d..3724b988064e 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -45,6 +45,7 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
@@ -96,6 +97,25 @@
 	status = "okay";
 };
 
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
@@ -110,6 +130,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_h702: mmc0_cd_pin@0 {
 		allwinner,pins = "PG0";
@@ -117,6 +141,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 #include "axp209.dtsi"
@@ -152,13 +190,33 @@
 	regulator-name = "vcc-wifi";
 };
 
+&reg_usb0_vbus {
+	pinctrl-0 = <&usb0_vbus_pin_a>;
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins_b>;
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG12";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 42324005eb7c..b3c234c65ea1 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -159,6 +159,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
 		allwinner,pins = "PG0";
@@ -174,6 +178,20 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
 	usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
 		allwinner,pins = "PG11";
 		allwinner,function = "gpio_out";
@@ -182,6 +200,11 @@
 	};
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
 &reg_usb1_vbus {
 	pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
 	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
@@ -194,7 +217,21 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG12";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index 514f159a14d4..eb793d5a2bd6 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -93,7 +93,7 @@
 		compatible = "chipone,icn8318";
 		reg = <0x40>;
 		interrupt-parent = <&pio>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+		interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts_wake_pin_p66>;
 		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
@@ -153,6 +153,10 @@
 	};
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_p66: mmc0_cd_pin@0 {
 		allwinner,pins = "PG0";
@@ -161,6 +165,20 @@
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	i2c_lcd_pins: i2c_lcd_pin@0 {
 		allwinner,pins = "PG10", "PG12";
 		allwinner,function = "gpio_out";
@@ -219,7 +237,16 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 427c0e7289fa..78b993abbaa3 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -417,6 +417,19 @@
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@01c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ahb_gates 0>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
 		usbphy: phy@01c13400 {
 			#phy-cells = <1>;
 			compatible = "allwinner,sun5i-a13-usb-phy";
@@ -476,8 +489,7 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			i2c0_pins_a: i2c0@0 {
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
index 4404f37d132e..4dd70cce2127 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -143,6 +143,11 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index e4d3484d97bd..54bb83b58f42 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -544,6 +544,19 @@
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@01c19000 {
+			compatible = "allwinner,sun6i-a31-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ahb1_gates 24>;
+			resets = <&ahb1_rst 24>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
 		usbphy: phy@01c19400 {
 			compatible = "allwinner,sun6i-a31-usb-phy";
 			reg = <0x01c19400 0x10>,
@@ -631,8 +644,7 @@
 			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			uart0_pins_a: uart0@0 {
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
index 1e2411a2bcea..5e8f8c4f2b30 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
@@ -93,6 +93,11 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usbphy {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 4611e2f5a99e..e6b019232a9e 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -88,15 +88,11 @@
 		};
 	};
 
-	reg_vmmc3: vmmc3 {
-		compatible = "regulator-fixed";
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_cubietruck>;
-		regulator-name = "vmmc3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>;
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
 	};
 };
 
@@ -172,7 +168,8 @@
 &mmc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins_a>;
-	vmmc-supply = <&reg_vmmc3>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
@@ -181,7 +178,7 @@
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
 		interrupt-names = "host-wake";
 	};
 };
@@ -199,23 +196,27 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
-	vmmc3_pin_cubietruck: vmmc3_pin@0 {
-		allwinner,pins = "PH9";
+	ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+		allwinner,pins = "PH12";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-		allwinner,pins = "PH12";
+	led_pins_cubietruck: led_pins@0 {
+		allwinner,pins = "PH7", "PH11", "PH20", "PH21";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	led_pins_cubietruck: led_pins@0 {
-		allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+	mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
+		allwinner,pins = "PH9";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -227,6 +228,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH19";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &pwm {
@@ -288,7 +303,16 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+	usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index f32f6f20d923..1e6bd360dac0 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -178,7 +178,7 @@
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
 		interrupt-names = "host-wake";
 	};
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 769726dfb046..04237085dc39 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -135,6 +135,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
 		allwinner,pins = "PC3";
@@ -149,6 +153,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
 };
 
 &reg_ahci_5v {
@@ -157,6 +175,10 @@
 	status = "okay";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -171,7 +193,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 00f8f25eccae..c5d70caade82 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -215,6 +215,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
 		allwinner,pins = "PH11";
@@ -229,12 +233,30 @@
 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
 };
 
 &reg_ahci_5v {
 	status = "okay";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -275,7 +297,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index d3b2f26417aa..2bebaa286f9a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -722,6 +722,19 @@
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@01c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ahb_gates 0>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
 		usbphy: phy@01c13400 {
 			#phy-cells = <1>;
 			compatible = "allwinner,sun7i-a20-usb-phy";
@@ -825,8 +838,7 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			pwm0_pins_a: pwm0@0 {
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index c318c770b6c1..27a925ec17d2 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -347,6 +347,28 @@
 			#size-cells = <0>;
 		};
 
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 26>;
+			resets = <&ahb1_rst 26>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+			resets = <&ahb1_rst 29>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		pio: pinctrl@01c20800 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
@@ -354,8 +376,7 @@
 			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			uart0_pins_a: uart0@0 {
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
index 95134c69cfc1..8d9da6886a4c 100644
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -125,3 +125,12 @@
 	pinctrl-0 = <&r_uart_pins_a>;
 	status = "okay";
 };
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index 8698f7aa31c7..2cc27c7a59dc 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -58,6 +58,39 @@
 			clock-output-names = "mbus";
 		};
 	};
+
+	soc@01c00000 {
+		usb_otg: usb@01c19000 {
+			compatible = "allwinner,sun6i-a31-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ahb1_gates 24>;
+			resets = <&ahb1_rst 24>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			compatible = "allwinner,sun8i-a23-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1";
+			clocks = <&usb_clk 8>,
+				 <&usb_clk 9>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&usb_clk 0>,
+				 <&usb_clk 1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+	};
 };
 
 &pio {
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
index 866703355b9c..1aefc6793e25 100644
--- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
@@ -61,6 +61,10 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -109,6 +113,10 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
 		allwinner,pins = "PB4";
@@ -123,3 +131,12 @@
 	pinctrl-0 = <&r_uart_pins_a>;
 	status = "okay";
 };
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
new file mode 100644
index 000000000000..a43897515fb6
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
@@ -0,0 +1,133 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Ippo Q8H Quad Core Tablet (v1.2)";
+	compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
index 5788c29cb56a..1d5390d4e03a 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -63,6 +63,10 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &lradc {
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
@@ -113,6 +117,10 @@
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
 		allwinner,pins = "PB4";
@@ -127,3 +135,8 @@
 	pinctrl-0 = <&uart0_pins_b>;
 	status = "okay";
 };
+
+&usbphy {
+	status = "okay";
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 85ee08098b7b..faa7d3c1fcea 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -80,6 +80,39 @@
 			clock-output-names = "mbus";
 		};
 	};
+
+	soc@01c00000 {
+		usb_otg: usb@01c19000 {
+			compatible = "allwinner,sun8i-a33-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ahb1_gates 24>;
+			resets = <&ahb1_rst 24>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			compatible = "allwinner,sun8i-a33-usb-phy";
+			reg = <0x01c19400 0x14>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1";
+			clocks = <&usb_clk 8>,
+				 <&usb_clk 9>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&usb_clk 0>,
+				 <&usb_clk 1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+	};
 };
 
 &pio {
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index 51cc8383f70f..f1953b0c5059 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -108,6 +108,7 @@
 		regulator-name = "usb1-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
 		enable-active-high;
 		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
@@ -120,6 +121,7 @@
 		regulator-name = "usb2-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
 		enable-active-high;
 		gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index f58a3d9d5f13..9d4f86e9c50a 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -214,9 +214,9 @@
 		#dma-cells = <1>;
 	};
 
-	ahb: ahb@6000c004 {
+	ahb: ahb@6000c000 {
 		compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
-		reg = <0x6000c004 0x14c>;
+		reg = <0x6000c000 0x150>;
 	};
 
 	gpio: gpio@6000d000 {
@@ -234,6 +234,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 246>;
 	};
 
 	apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index bd43ed6d6ec7..66b4451eb2ca 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -53,6 +53,14 @@
 		};
 	};
 
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	pinmux: pinmux@0,70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
@@ -1462,7 +1470,7 @@
 				vin-ldo9-10-supply = <&vdd_5v0_sys>;
 				vin-ldo11-supply = <&vdd_3v3_run>;
 
-				sd0 {
+				vdd_cpu: sd0 {
 					regulator-name = "+VDD_CPU_AP";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1400000>;
@@ -1514,7 +1522,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
@@ -1694,6 +1702,13 @@
 		non-removable;
 	};
 
+	/* CPU DFLL clock */
+	clock@0,70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
 	ahub@0,70300000 {
 		i2s@0,70301100 {
 			status = "okay";
@@ -1732,6 +1747,12 @@
 		};
 	};
 
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 79e724bb7df7..cfbdf429b45d 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -43,6 +43,14 @@
 		};
 	};
 
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	pinmux: pinmux@0,70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&pinmux_boot>;
@@ -735,7 +743,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 01a9f742b08f..1e204a6de12c 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/tegra124-car.h>
 #include <dt-bindings/thermal/tegra124-soctherm.h>
 
 #include "skeleton.dtsi"
@@ -188,6 +189,9 @@
 		clock-names = "gpu", "pwr";
 		resets = <&tegra_car 184>;
 		reset-names = "gpu";
+
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+
 		status = "disabled";
 	};
 
@@ -254,6 +258,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 251>;
 	};
 
 	apbdma: dma@0,60020000 {
@@ -702,6 +707,30 @@
 		#thermal-sensor-cells = <1>;
 	};
 
+	dfll: clock@0,70110000 {
+		compatible = "nvidia,tegra124-dfll";
+		reg = <0 0x70110000 0 0x100>, /* DFLL control */
+		      <0 0x70110000 0 0x100>, /* I2C output control */
+		      <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+		      <0 0x70110200 0 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA124_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+		reset-names = "dvco";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		nvidia,sample-rate = <12500>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,cf = <10>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		status = "disabled";
+	};
+
 	ahub@0,70300000 {
 		compatible = "nvidia,tegra124-ahub";
 		reg = <0x0 0x70300000 0x0 0x200>,
@@ -922,6 +951,15 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+
+			clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+				 <&tegra_car TEGRA124_CLK_CCLK_LP>,
+				 <&tegra_car TEGRA124_CLK_PLL_X>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>,
+				 <&dfll>;
+			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+			/* FIXME: what's the actual transition time? */
+			clock-latency = <300000>;
 		};
 
 		cpu@1 {
@@ -943,6 +981,18 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0}>,
+				     <&{/cpus/cpu@1}>,
+				     <&{/cpus/cpu@2}>,
+				     <&{/cpus/cpu@3}>;
+	};
+
 	thermal-zones {
 		cpu {
 			polling-delay-passive = <1000>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index f444b67f55c6..e058709e6d98 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -225,9 +225,9 @@
 		#dma-cells = <1>;
 	};
 
-	ahb@6000c004 {
+	ahb@6000c000 {
 		compatible = "nvidia,tegra20-ahb";
-		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
+		reg = <0x6000c000 0x110>; /* AHB Arbitration + Gizmo Controller */
 	};
 
 	gpio: gpio@6000d000 {
@@ -244,6 +244,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 224>;
 	};
 
 	apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 782b11b2af6a..fe04fb5e155f 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -329,9 +329,9 @@
 		#dma-cells = <1>;
 	};
 
-	ahb: ahb@6000c004 {
+	ahb: ahb@6000c000 {
 		compatible = "nvidia,tegra30-ahb";
-		reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
+		reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */
 	};
 
 	gpio: gpio@6000d000 {
@@ -349,6 +349,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 248>;
 	};
 
 	apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
index 200b0c99ed34..bfd3bb8c8285 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
@@ -44,6 +44,7 @@
 
 /dts-v1/;
 /include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
@@ -57,11 +58,18 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = &serial0;
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
 	};
 };
 
@@ -74,6 +82,30 @@
 	ranges = <0x00000000 1 0x03f00000 0x00100000>;
 };
 
-&serialsc {
+&ethsc {
 	interrupts = <0 49 4>;
 };
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index 6a34c56e4693..a6a185fae8f1 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -64,6 +64,18 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <36864000>;
+		};
+
+		iobus_clk: iobus_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
 	};
 
 	soc {
@@ -79,12 +91,141 @@
 			#size-cells = <1>;
 		};
 
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			interrupts = <0 33 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			interrupts = <0 35 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			interrupts = <0 37 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			interrupts = <0 29 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			interrupts = <0 41 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			interrupts = <0 42 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			interrupts = <0 43 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			interrupts = <0 44 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
 		system-bus-controller-misc@59800000 {
 			compatible = "socionext,uniphier-system-bus-controller-misc",
 				     "syscon";
 			reg = <0x59800000 0x2000>;
 		};
 
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			interrupts = <0 80 4>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			interrupts = <0 81 4>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			interrupts = <0 82 4>;
+		};
+
+		pinctrl: pinctrl@5f801000 {
+			compatible = "socionext,ph1-ld4-pinctrl",
+				     "syscon";
+			reg = <0x5f801000 0xe00>;
+		};
+
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
@@ -108,3 +249,5 @@
 		};
 	};
 };
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
new file mode 100644
index 000000000000..33963acd7e8f
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
@@ -0,0 +1,105 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD6b Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld6b.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-LD6b Reference Board";
+	compatible = "socionext,ph1-ld6b-ref", "socionext,ph1-ld6b";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&ethsc {
+	interrupts = <0 50 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
new file mode 100644
index 000000000000..c6499ee65bc6
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD6b SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * PH1-LD6b consists of two silicon dies: D-chip and A-chip.
+ * The D-chip (digital chip) is the same as the ProXstream2 die.
+ * Reuse the ProXstream2 device tree with some properties overridden.
+ */
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+	compatible = "socionext,ph1-ld6b";
+};
+
+/* UART3 unavilable: the pads are not wired to the package balls */
+&serial3 {
+	status = "disabled";
+};
+
+/*
+ * PH1-LD6b and ProXstream2 have completely different packages,
+ * which makes the pinctrl driver unshareable.
+ */
+&pinctrl {
+	compatible = "socionext,ph1-ld6b-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
index d891135a70c2..69a5b7d39629 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
@@ -44,6 +44,7 @@
 
 /dts-v1/;
 /include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
@@ -57,11 +58,20 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = &serial0;
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
 	};
 };
 
@@ -74,6 +84,30 @@
 	ranges = <0x00000000 1 0x03f00000 0x00100000>;
 };
 
-&serialsc {
+&ethsc {
 	interrupts = <0 50 4>;
 };
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index dc633603aed2..e8bbc454d788 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -71,6 +71,18 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <73728000>;
+		};
+
+		i2c_clk: i2c_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
 	};
 
 	soc {
@@ -86,12 +98,156 @@
 			#size-cells = <1>;
 		};
 
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			interrupts = <0 33 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			interrupts = <0 35 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			interrupts = <0 37 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			interrupts = <0 29 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			interrupts = <0 41 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			interrupts = <0 42 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			interrupts = <0 43 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			interrupts = <0 44 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		/* i2c4 does not exist */
+
+		/* chip-internal connection for DMD */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
 		system-bus-controller-misc@59800000 {
 			compatible = "socionext,uniphier-system-bus-controller-misc",
 				     "syscon";
 			reg = <0x59800000 0x2000>;
 		};
 
+		usb2: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			interrupts = <0 80 4>;
+		};
+
+		usb3: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
+			interrupts = <0 81 4>;
+		};
+
+		pinctrl: pinctrl@5f801000 {
+			compatible = "socionext,ph1-pro4-pinctrl",
+				     "syscon";
+			reg = <0x5f801000 0xe00>;
+		};
+
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
@@ -115,3 +271,5 @@
 		};
 	};
 };
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
new file mode 100644
index 000000000000..59c2b127cffa
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
@@ -0,0 +1,252 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro5 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-pro5";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,uniphier-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <73728000>;
+		};
+
+		i2c_clk: i2c_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			interrupts = <0 33 4>;
+			clocks = <&uart_clk>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			interrupts = <0 35 4>;
+			clocks = <&uart_clk>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			interrupts = <0 37 4>;
+			clocks = <&uart_clk>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			interrupts = <0 177 4>;
+			clocks = <&uart_clk>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			interrupts = <0 41 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			interrupts = <0 42 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			interrupts = <0 43 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			interrupts = <0 44 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		/* i2c4 does not exist */
+
+		/* chip-internal connection for DMD */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+
+		pinctrl: pinctrl@5f801000 {
+			compatible = "socionext,ph1-pro5-pinctrl", "syscon";
+			reg = <0x5f801000 0xe00>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
index 3ea64ae009e9..1a440f87fa92 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
@@ -44,6 +44,7 @@
 
 /dts-v1/;
 /include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
@@ -58,11 +59,18 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = &serial0;
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
 	};
 };
 
@@ -75,6 +83,38 @@
 	ranges = <0x00000000 1 0x03f00000 0x00100000>;
 };
 
-&serialsc {
+&ethsc {
 	interrupts = <0 49 4>;
 };
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
index 248b1886834f..3cc90cd37a26 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
@@ -71,6 +71,18 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <36864000>;
+		};
+
+		iobus_clk: iobus_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
 	};
 
 	soc {
@@ -108,10 +120,120 @@
 			      <0x20000100 0x100>;
 		};
 
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c4: i2c@58600000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58600000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <400000>;
+		};
+
 		system-bus-controller-misc@59800000 {
 			compatible = "socionext,uniphier-system-bus-controller-misc",
 				     "syscon";
 			reg = <0x59800000 0x2000>;
 		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+		};
+
+		usb3: usb@5a830100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a830100 0x100>;
+			interrupts = <0 83 4>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
index dcdc4f74387d..955d417a5c42 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
@@ -44,6 +44,7 @@
 
 /dts-v1/;
 /include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
@@ -57,11 +58,18 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = &serial0;
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
 	};
 };
 
@@ -74,6 +82,34 @@
 	ranges = <0x00000000 1 0x03f00000 0x00100000>;
 };
 
-&serialsc {
+&ethsc {
 	interrupts = <0 48 4>;
 };
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index baa71e1febb8..58067dfc16e5 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -64,6 +64,18 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <80000000>;
+		};
+
+		iobus_clk: iobus_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
 	};
 
 	soc {
@@ -79,12 +91,141 @@
 			#size-cells = <1>;
 		};
 
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			interrupts = <0 33 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			interrupts = <0 35 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			interrupts = <0 37 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			interrupts = <0 29 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			interrupts = <0 41 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			interrupts = <0 42 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			interrupts = <0 43 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			interrupts = <0 44 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
 		system-bus-controller-misc@59800000 {
 			compatible = "socionext,uniphier-system-bus-controller-misc",
 				     "syscon";
 			reg = <0x59800000 0x2000>;
 		};
 
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			interrupts = <0 80 4>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			interrupts = <0 81 4>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			interrupts = <0 82 4>;
+		};
+
+		pinctrl: pinctrl@5f801000 {
+			compatible = "socionext,ph1-sld8-pinctrl",
+				     "syscon";
+			reg = <0x5f801000 0xe00>;
+		};
+
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
@@ -108,3 +249,5 @@
 		};
 	};
 };
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
new file mode 100644
index 000000000000..f67445f4f10d
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Device Tree Source for UniPhier SoCs default pinctrl settings
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&pinctrl {
+	pinctrl_i2c0: i2c0_grp {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	pinctrl_i2c1: i2c1_grp {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	pinctrl_i2c2: i2c2_grp {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	pinctrl_i2c3: i2c3_grp {
+		groups = "i2c3";
+		function = "i2c3";
+	};
+
+	pinctrl_uart0: uart0_grp {
+		groups = "uart0";
+		function = "uart0";
+	};
+
+	pinctrl_uart1: uart1_grp {
+		groups = "uart1";
+		function = "uart1";
+	};
+
+	pinctrl_uart2: uart2_grp {
+		groups = "uart2";
+		function = "uart2";
+	};
+
+	pinctrl_uart3: uart3_grp {
+		groups = "uart3";
+		function = "uart3";
+	};
+
+	pinctrl_usb0: usb0_grp {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	pinctrl_usb1: usb1_grp {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	pinctrl_usb2: usb2_grp {
+		groups = "usb2";
+		function = "usb2";
+	};
+
+	pinctrl_usb3: usb3_grp {
+		groups = "usb3";
+		function = "usb3";
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
new file mode 100644
index 000000000000..4c7b24611012
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
@@ -0,0 +1,273 @@
+/*
+ * Device Tree Source for UniPhier ProXstream2 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,proxstream2";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,uniphier-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <88900000>;
+		};
+
+		i2c_clk: i2c_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			interrupts = <0 33 4>;
+			clocks = <&uart_clk>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			interrupts = <0 35 4>;
+			clocks = <&uart_clk>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			interrupts = <0 37 4>;
+			clocks = <&uart_clk>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			interrupts = <0 177 4>;
+			clocks = <&uart_clk>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			interrupts = <0 41 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			interrupts = <0 42 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			interrupts = <0 43 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			interrupts = <0 44 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for STM */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+
+		pinctrl: pinctrl@5f801000 {
+			compatible = "socionext,proxstream2-pinctrl", "syscon";
+			reg = <0x5f801000 0xe00>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0xf04>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0xf04>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
new file mode 100644
index 000000000000..3d29d2806cc0
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Device Tree Source for UniPhier Reference Daughter Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&i2c0 {
+	eeprom {
+		compatible = "microchip,24lc128";
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 2efb2058ba49..21b02874bea3 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -101,6 +101,8 @@
 				clock-names = "refclk", "timclk", "apb_pclk";
 				#clock-cells = <1>;
 				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+				assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+				assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
 			};
 
 			/* PCI-E I2C bus */
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index cb3090f919a7..e712c0af149b 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -100,6 +100,8 @@
 				clock-names = "refclk", "timclk", "apb_pclk";
 				#clock-cells = <1>;
 				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+				assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+				assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
 			};
 
 			/* PCI-E I2C bus */
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index 606753eb72c8..ed65e0f7dfc0 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -9,7 +9,7 @@
 
 / {
 	chosen {
-		bootargs = "console=ttyLP0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 
 	clk16m: clk16m {
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa335166be7..6865137fd114 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -226,7 +226,10 @@
 				interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ADC0>;
 				clock-names = "adc";
+				#io-channel-cells = <1>;
 				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
 			};
 
 			wdoga5: wdog@4003e000 {
@@ -242,7 +245,8 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-qspi";
-				reg = <0x40044000 0x1000>;
+				reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_QSPI0_EN>,
 					<&clks VF610_CLK_QSPI0>;
@@ -347,6 +351,20 @@
 				status = "disabled";
 			};
 
+			i2c1: i2c@40067000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40067000 0x1000>;
+				interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C1>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 52>,
+					<&edma0 0 53>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
 			clks: ccm@4006b000 {
 				compatible = "fsl,vf610-ccm";
 				reg = <0x4006b000 0x1000>;
@@ -404,14 +422,13 @@
 			};
 
 			snvs0: snvs@400a7000 {
-			    compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x400a7000 0x2000>;
+			    compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x400a7000 0x2000>;
 
-				snvsrtc: snvs-rtc-lp@34 {
+				snvsrtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
+					regmap = <&snvs0>;
+					offset = <0x34>;
 					interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks VF610_CLK_SNVS>;
 					clock-names = "snvs-rtc";
@@ -442,9 +459,23 @@
 				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ADC1>;
 				clock-names = "adc";
+				#io-channel-cells = <1>;
 				status = "disabled";
 			};
 
+			esdhc0: esdhc@400b1000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b1000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC0>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
+			};
+
 			esdhc1: esdhc@400b2000 {
 				compatible = "fsl,imx53-esdhc";
 				reg = <0x400b2000 0x1000>;
@@ -488,6 +519,19 @@
 				status = "disabled";
 			};
 
+			qspi1: quadspi@400c4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-qspi";
+				reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_QSPI1_EN>,
+					<&clks VF610_CLK_QSPI1>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
 			fec0: ethernet@400d0000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
@@ -520,6 +564,33 @@
 				status = "disabled";
 			};
 
+			i2c2: i2c@400e6000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e6000 0x1000>;
+				interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C2>;
+				clock-names = "ipg";
+				dmas = <&edma0 1 36>,
+					<&edma0 1 37>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@400e7000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e7000 0x1000>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C3>;
+				clock-names = "ipg";
+				dmas = <&edma0 1 38>,
+					<&edma0 1 39>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 06915080b875..dc0457e40775 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -57,7 +57,7 @@
 		regulator-always-on;
 	};
 
-	amba {
+	amba: amba {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -139,6 +139,7 @@
 		L2: cache-controller@f8f02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xF8F02000 0x1000>;
+			interrupts = <0 2 4>;
 			arm,data-latency = <3 2 2>;
 			arm,tag-latency = <2 2 2>;
 			cache-unified;
@@ -258,6 +259,13 @@
 				reg = <0x100 0x100>;
 			};
 
+			rstc: rstc@200 {
+				compatible = "xlnx,zynq-reset";
+				reg = <0x200 0x48>;
+				#reset-cells = <1>;
+				syscon = <&slcr>;
+			};
+
 			pinctrl0: pinctrl@700 {
 				compatible = "xlnx,pinctrl-zynq";
 				reg = <0x700 0x200>;
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index fb59d34e8ee6..5df8f81f4217 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -34,6 +34,27 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		sw14 {
+			label = "sw14";
+			gpios = <&gpio0 12 0>;
+			linux,code = <108>; /* down */
+			gpio-key,wakeup;
+			autorepeat;
+		};
+		sw13 {
+			label = "sw13";
+			gpios = <&gpio0 14 0>;
+			linux,code = <103>; /* up */
+			gpio-key,wakeup;
+			autorepeat;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -50,6 +71,13 @@
 	};
 };
 
+&amba {
+	ocm: sram@fffc0000 {
+		compatible = "mmio-sram";
+		reg = <0xfffc0000 0x10000>;
+	};
+};
+
 &can0 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index ac521e764d10..b001f7ae67f3 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -324,10 +324,13 @@ CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_EDMA_SOC=m
 CONFIG_SND_AM33XX_SOC_EVM=m
+CONFIG_SND_DAVINCI_SOC_MCASP=m
 CONFIG_SND_OMAP_SOC=m
 CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
 CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
+CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SND_SOC_TLV320AIC3X=m
 CONFIG_HID_GENERIC=m
 CONFIG_USB_HIDDEV=y
 CONFIG_USB_KBD=m
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 1a352f561113..ea56397599c2 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -14,9 +14,18 @@
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/ti_wilink_st.h>
+#include <linux/wl12xx.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <linux/platform_data/pinctrl-single.h>
 #include <linux/platform_data/iommu-omap.h>
+#include <linux/platform_data/wkup_m3.h>
+
+#include <asm/siginfo.h>
+#include <asm/signal.h>
 
 #include "common.h"
 #include "common-board-devices.h"
@@ -25,6 +34,7 @@
 #include "omap_device.h"
 #include "omap-secure.h"
 #include "soc.h"
+#include "hsmmc.h"
 
 struct pdata_init {
 	const char *compatible;
@@ -268,8 +278,136 @@ static void __init omap3_tao3530_legacy_init(void)
 {
 	hsmmc2_internal_input_clk();
 }
+
+/* omap3pandora legacy devices */
+#define PANDORA_WIFI_IRQ_GPIO		21
+#define PANDORA_WIFI_NRESET_GPIO	23
+
+static struct platform_device pandora_backlight = {
+	.name	= "pandora-backlight",
+	.id	= -1,
+};
+
+static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
+};
+
+static struct regulator_init_data pandora_vmmc3 = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc3_supply),
+	.consumer_supplies	= pandora_vmmc3_supply,
+};
+
+static struct fixed_voltage_config pandora_vwlan = {
+	.supply_name		= "vwlan",
+	.microvolts		= 1800000, /* 1.8V */
+	.gpio			= PANDORA_WIFI_NRESET_GPIO,
+	.startup_delay		= 50000, /* 50ms */
+	.enable_high		= 1,
+	.init_data		= &pandora_vmmc3,
+};
+
+static struct platform_device pandora_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &pandora_vwlan,
+	},
+};
+
+static void pandora_wl1251_init_card(struct mmc_card *card)
+{
+	/*
+	 * We have TI wl1251 attached to MMC3. Pass this information to
+	 * SDIO core because it can't be probed by normal methods.
+	 */
+	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
+		card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+		card->cccr.wide_bus = 1;
+		card->cis.vendor = 0x104c;
+		card->cis.device = 0x9066;
+		card->cis.blksize = 512;
+		card->cis.max_dtr = 24000000;
+		card->ocr = 0x80;
+	}
+}
+
+static struct omap2_hsmmc_info pandora_mmc3[] = {
+	{
+		.mmc		= 3,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.init_card	= pandora_wl1251_init_card,
+	},
+	{}	/* Terminator */
+};
+
+static void __init pandora_wl1251_init(void)
+{
+	struct wl1251_platform_data pandora_wl1251_pdata;
+	int ret;
+
+	memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
+
+	pandora_wl1251_pdata.power_gpio = -1;
+
+	ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
+	if (ret < 0)
+		goto fail;
+
+	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
+	if (pandora_wl1251_pdata.irq < 0)
+		goto fail_irq;
+
+	pandora_wl1251_pdata.use_eeprom = true;
+	ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
+	if (ret < 0)
+		goto fail_irq;
+
+	return;
+
+fail_irq:
+	gpio_free(PANDORA_WIFI_IRQ_GPIO);
+fail:
+	pr_err("wl1251 board initialisation failed\n");
+}
+
+static void __init omap3_pandora_legacy_init(void)
+{
+	platform_device_register(&pandora_backlight);
+	platform_device_register(&pandora_vwlan_device);
+	omap_hsmmc_init(pandora_mmc3);
+	omap_hsmmc_late_init(pandora_mmc3);
+	pandora_wl1251_init();
+}
 #endif /* CONFIG_ARCH_OMAP3 */
 
+#ifdef CONFIG_SOC_TI81XX
+static int fault_fixed_up;
+
+static int t410_abort_handler(unsigned long addr, unsigned int fsr,
+			      struct pt_regs *regs)
+{
+	if ((fsr == 0x406 || fsr == 0xc06) && !fault_fixed_up) {
+		pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
+			addr, fsr);
+		fault_fixed_up = 1;
+		return 0;
+	}
+
+	return 1;
+}
+
+static void __init t410_abort_init(void)
+{
+	hook_fault_code(16 + 6, t410_abort_handler, SIGBUS, BUS_OBJERR,
+			"imprecise external abort");
+}
+#endif
+
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 static struct iommu_platform_data omap4_iommu_pdata = {
 	.reset_name = "mmu_cache",
@@ -278,6 +416,14 @@ static struct iommu_platform_data omap4_iommu_pdata = {
 };
 #endif
 
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
+static struct wkup_m3_platform_data wkup_m3_data = {
+	.reset_name = "wkup_m3",
+	.assert_reset = omap_device_assert_hardreset,
+	.deassert_reset = omap_device_deassert_hardreset,
+};
+#endif
+
 #ifdef CONFIG_SOC_OMAP5
 static void __init omap5_uevm_legacy_init(void)
 {
@@ -340,6 +486,10 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
 		       &am35xx_emac_pdata),
 #endif
+#ifdef CONFIG_SOC_AM33XX
+	OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
+		       &wkup_m3_data),
+#endif
 #ifdef CONFIG_ARCH_OMAP4
 	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
@@ -353,6 +503,8 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 #endif
 #ifdef CONFIG_SOC_AM43XX
 	OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
+		       &wkup_m3_data),
 #endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
@@ -381,6 +533,11 @@ static struct pdata_init pdata_quirks[] __initdata = {
 	{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
 	{ "ti,am3517-evm", am3517_evm_legacy_init, },
 	{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
+	{ "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
+	{ "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
+#endif
+#ifdef CONFIG_SOC_TI81XX
+	{ "hp,t410", t410_abort_init, },
 #endif
 #ifdef CONFIG_SOC_OMAP5
 	{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2412efb6cdd9..08d2be2ea41f 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -78,11 +78,11 @@ config MACH_LINKSTATION_LSCHL
 	  Buffalo Linkstation Live v3 (LS-CHL) platform.
 
 config MACH_LINKSTATION_MINI
-	bool "Buffalo Linkstation Mini"
-	select I2C_BOARDINFO
+	bool "Buffalo Linkstation Mini (Flattened Device Tree)"
+	select ARCH_ORION5X_DT
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation Mini platform.
+	  Buffalo Linkstation Mini (LS-WSGL) platform.
 
 config MACH_LINKSTATION_LS_HGL
 	bool "Buffalo Linkstation LS-HGL"
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index a40b5c9a58c4..a1e0fbe6a7a1 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -4,7 +4,6 @@ obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
 obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
 obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
deleted file mode 100644
index a6493e76f96d..000000000000
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * arch/arm/mach-orion5x/lsmini-setup.c
- *
- * Maintainer: Alexey Kopytko <alexey@kopytko.ru>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * Linkstation Mini Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LSMINI_NOR_BOOT_BASE	0xf4000000
-#define LSMINI_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data lsmini_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource lsmini_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LSMINI_NOR_BOOT_BASE,
-	.end	= LSMINI_NOR_BOOT_BASE + LSMINI_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device lsmini_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &lsmini_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &lsmini_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data lsmini_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata lsmini_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LSMINI_GPIO_LED_ALARM	2
-#define LSMINI_GPIO_LED_INFO	3
-#define LSMINI_GPIO_LED_FUNC	9
-#define LSMINI_GPIO_LED_PWR	14
-
-static struct gpio_led lsmini_led_pins[] = {
-	{
-		.name	   = "alarm:red",
-		.gpio	   = LSMINI_GPIO_LED_ALARM,
-		.active_low     = 1,
-	}, {
-		.name	   = "info:amber",
-		.gpio	   = LSMINI_GPIO_LED_INFO,
-		.active_low     = 1,
-	}, {
-		.name	   = "func:blue:top",
-		.gpio	   = LSMINI_GPIO_LED_FUNC,
-		.active_low     = 1,
-	}, {
-		.name	   = "power:blue:bottom",
-		.gpio	   = LSMINI_GPIO_LED_PWR,
-	},
-};
-
-static struct gpio_led_platform_data lsmini_led_data = {
-	.leds	   = lsmini_led_pins,
-	.num_leds       = ARRAY_SIZE(lsmini_led_pins),
-};
-
-static struct platform_device lsmini_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &lsmini_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-
-#define LSMINI_GPIO_KEY_FUNC       15
-#define LSMINI_GPIO_KEY_POWER	   18
-#define LSMINI_GPIO_KEY_AUTOPOWER 17
-
-#define LSMINI_SW_POWER		0x00
-#define LSMINI_SW_AUTOPOWER	0x01
-
-static struct gpio_keys_button lsmini_buttons[] = {
-	{
-		.code	   = KEY_OPTION,
-		.gpio	   = LSMINI_GPIO_KEY_FUNC,
-		.desc	   = "Function Button",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LSMINI_SW_POWER,
-		.gpio	   = LSMINI_GPIO_KEY_POWER,
-		.desc	   = "Power-on Switch",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LSMINI_SW_AUTOPOWER,
-		.gpio	   = LSMINI_GPIO_KEY_AUTOPOWER,
-		.desc	   = "Power-auto Switch",
-		.active_low     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data lsmini_button_data = {
-	.buttons	= lsmini_buttons,
-	.nbuttons       = ARRAY_SIZE(lsmini_buttons),
-};
-
-static struct platform_device lsmini_button_device = {
-	.name	   = "gpio-keys",
-	.id	     = -1,
-	.num_resources  = 0,
-	.dev	    = {
-		.platform_data  = &lsmini_button_data,
-	},
-};
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data lsmini_sata_data = {
-	.n_ports	= 2,
-};
-
-
-/*****************************************************************************
- * Linkstation Mini specific power off method: reboot
- ****************************************************************************/
-/*
- * On the Linkstation Mini, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- */
-
-static void lsmini_power_off(void)
-{
-	orion5x_restart(REBOOT_HARD, NULL);
-}
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-#define LSMINI_GPIO_USB_POWER	16
-#define LSMINI_GPIO_AUTO_POWER	17
-#define LSMINI_GPIO_POWER	18
-
-#define LSMINI_GPIO_HDD_POWER0	1
-#define LSMINI_GPIO_HDD_POWER1	19
-
-static unsigned int lsmini_mpp_modes[] __initdata = {
-	MPP0_UNUSED, /* LED_RESERVE1 (unused) */
-	MPP1_GPIO, /* HDD_PWR */
-	MPP2_GPIO, /* LED_ALARM */
-	MPP3_GPIO, /* LED_INFO */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_UNUSED,
-	MPP7_UNUSED,
-	MPP8_UNUSED,
-	MPP9_GPIO, /* LED_FUNC */
-	MPP10_UNUSED,
-	MPP11_UNUSED, /* LED_ETH (dummy) */
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_GPIO, /* LED_PWR */
-	MPP15_GPIO, /* FUNC */
-	MPP16_GPIO, /* USB_PWR */
-	MPP17_GPIO, /* AUTO_POWER */
-	MPP18_GPIO, /* POWER */
-	MPP19_GPIO, /* HDD_PWR1 */
-	0,
-};
-
-static void __init lsmini_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(lsmini_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&lsmini_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&lsmini_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    LSMINI_NOR_BOOT_BASE,
-				    LSMINI_NOR_BOOT_SIZE);
-	platform_device_register(&lsmini_nor_flash);
-
-	platform_device_register(&lsmini_button_device);
-
-	platform_device_register(&lsmini_leds);
-
-	i2c_register_board_info(0, &lsmini_i2c_rtc, 1);
-
-	/* enable USB power */
-	gpio_set_value(LSMINI_GPIO_USB_POWER, 1);
-
-	/* register power-off method */
-	pm_power_off = lsmini_power_off;
-
-	pr_info("%s: finished\n", __func__);
-}
-
-#ifdef CONFIG_MACH_LINKSTATION_MINI
-MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
-	/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
-	.atag_offset	= 0x100,
-	.init_machine	= lsmini_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 72411fbcb6f3..097fc90bf19a 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -74,6 +74,7 @@ static struct ti_dt_clk am43xx_clks[] = {
 	DT_CLK(NULL, "clk_24mhz", "clk_24mhz"),
 	DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
 	DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
+	DT_CLK(NULL, "dpll_clksel_mac_clk", "dpll_clksel_mac_clk"),
 	DT_CLK(NULL, "gpio0_dbclk_mux_ck", "gpio0_dbclk_mux_ck"),
 	DT_CLK(NULL, "gpio0_dbclk", "gpio0_dbclk"),
 	DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c
index 0f982b829be1..0fd7fd2b0f72 100644
--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@@ -624,6 +624,22 @@ static struct pinctrl_desc tegra_pinctrl_desc = {
 	.owner = THIS_MODULE,
 };
 
+static bool gpio_node_has_range(void)
+{
+	struct device_node *np;
+	bool has_prop = false;
+
+	np = of_find_compatible_node(NULL, NULL, "nvidia,tegra30-gpio");
+	if (!np)
+		return has_prop;
+
+	has_prop = of_find_property(np, "gpio-ranges", NULL);
+
+	of_node_put(np);
+
+	return has_prop;
+}
+
 int tegra_pinctrl_probe(struct platform_device *pdev,
 			const struct tegra_pinctrl_soc_data *soc_data)
 {
@@ -708,7 +724,8 @@ int tegra_pinctrl_probe(struct platform_device *pdev,
 		return PTR_ERR(pmx->pctl);
 	}
 
-	pinctrl_add_gpio_range(pmx->pctl, &tegra_pinctrl_gpio_range);
+	if (!gpio_node_has_range())
+		pinctrl_add_gpio_range(pmx->pctl, &tegra_pinctrl_gpio_range);
 
 	platform_set_drvdata(pdev, pmx);
 
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index ff7ca3584e16..7b1ad8922eec 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -108,6 +108,7 @@
 #define R8A7790_CLK_VIN2		9
 #define R8A7790_CLK_VIN1		10
 #define R8A7790_CLK_VIN0		11
+#define R8A7790_CLK_ETHERAVB		12
 #define R8A7790_CLK_ETHER		13
 #define R8A7790_CLK_SATA1		14
 #define R8A7790_CLK_SATA0		15
@@ -143,6 +144,8 @@
 #define R8A7790_CLK_SCU_ALL		17
 #define R8A7790_CLK_SCU_DVC1		18
 #define R8A7790_CLK_SCU_DVC0		19
+#define R8A7790_CLK_SCU_CTU1_MIX1	20
+#define R8A7790_CLK_SCU_CTU0_MIX0	21
 #define R8A7790_CLK_SCU_SRC9		22
 #define R8A7790_CLK_SCU_SRC8		23
 #define R8A7790_CLK_SCU_SRC7		24
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index 402268384b99..dd09b73c4aaf 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -141,6 +141,8 @@
 #define R8A7791_CLK_SCU_ALL		17
 #define R8A7791_CLK_SCU_DVC1		18
 #define R8A7791_CLK_SCU_DVC0		19
+#define R8A7791_CLK_SCU_CTU1_MIX1	20
+#define R8A7791_CLK_SCU_CTU0_MIX0	21
 #define R8A7791_CLK_SCU_SRC9		22
 #define R8A7791_CLK_SCU_SRC8		23
 #define R8A7791_CLK_SCU_SRC7		24
diff --git a/include/dt-bindings/clock/r8a7793-clock.h b/include/dt-bindings/clock/r8a7793-clock.h
new file mode 100644
index 000000000000..1579e07f96a3
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7793-clock.h
@@ -0,0 +1,164 @@
+/*
+ * r8a7793 clock definition
+ *
+ * Copyright (C) 2014  Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7793_H__
+#define __DT_BINDINGS_CLOCK_R8A7793_H__
+
+/* CPG */
+#define R8A7793_CLK_MAIN		0
+#define R8A7793_CLK_PLL0		1
+#define R8A7793_CLK_PLL1		2
+#define R8A7793_CLK_PLL3		3
+#define R8A7793_CLK_LB			4
+#define R8A7793_CLK_QSPI		5
+#define R8A7793_CLK_SDH			6
+#define R8A7793_CLK_SD0			7
+#define R8A7793_CLK_Z			8
+#define R8A7793_CLK_RCAN		9
+#define R8A7793_CLK_ADSP		10
+
+/* MSTP0 */
+#define R8A7793_CLK_MSIOF0		0
+
+/* MSTP1 */
+#define R8A7793_CLK_VCP0		1
+#define R8A7793_CLK_VPC0		3
+#define R8A7793_CLK_SSP1		9
+#define R8A7793_CLK_TMU1		11
+#define R8A7793_CLK_3DG			12
+#define R8A7793_CLK_2DDMAC		15
+#define R8A7793_CLK_FDP1_1		18
+#define R8A7793_CLK_FDP1_0		19
+#define R8A7793_CLK_TMU3		21
+#define R8A7793_CLK_TMU2		22
+#define R8A7793_CLK_CMT0		24
+#define R8A7793_CLK_TMU0		25
+#define R8A7793_CLK_VSP1_DU1		27
+#define R8A7793_CLK_VSP1_DU0		28
+#define R8A7793_CLK_VSP1_S		31
+
+/* MSTP2 */
+#define R8A7793_CLK_SCIFA2		2
+#define R8A7793_CLK_SCIFA1		3
+#define R8A7793_CLK_SCIFA0		4
+#define R8A7793_CLK_MSIOF2		5
+#define R8A7793_CLK_SCIFB0		6
+#define R8A7793_CLK_SCIFB1		7
+#define R8A7793_CLK_MSIOF1		8
+#define R8A7793_CLK_SCIFB2		16
+#define R8A7793_CLK_SYS_DMAC1		18
+#define R8A7793_CLK_SYS_DMAC0		19
+
+/* MSTP3 */
+#define R8A7793_CLK_TPU0		4
+#define R8A7793_CLK_SDHI2		11
+#define R8A7793_CLK_SDHI1		12
+#define R8A7793_CLK_SDHI0		14
+#define R8A7793_CLK_MMCIF0		15
+#define R8A7793_CLK_IIC0		18
+#define R8A7793_CLK_PCIEC		19
+#define R8A7793_CLK_IIC1		23
+#define R8A7793_CLK_SSUSB		28
+#define R8A7793_CLK_CMT1		29
+#define R8A7793_CLK_USBDMAC0		30
+#define R8A7793_CLK_USBDMAC1		31
+
+/* MSTP4 */
+#define R8A7793_CLK_IRQC		7
+
+/* MSTP5 */
+#define R8A7793_CLK_AUDIO_DMAC1         1
+#define R8A7793_CLK_AUDIO_DMAC0         2
+#define R8A7793_CLK_ADSP_MOD		6
+#define R8A7793_CLK_THERMAL		22
+#define R8A7793_CLK_PWM			23
+
+/* MSTP7 */
+#define R8A7793_CLK_EHCI		3
+#define R8A7793_CLK_HSUSB		4
+#define R8A7793_CLK_HSCIF2		13
+#define R8A7793_CLK_SCIF5		14
+#define R8A7793_CLK_SCIF4		15
+#define R8A7793_CLK_HSCIF1		16
+#define R8A7793_CLK_HSCIF0		17
+#define R8A7793_CLK_SCIF3		18
+#define R8A7793_CLK_SCIF2		19
+#define R8A7793_CLK_SCIF1		20
+#define R8A7793_CLK_SCIF0		21
+#define R8A7793_CLK_DU1			23
+#define R8A7793_CLK_DU0			24
+#define R8A7793_CLK_LVDS0		26
+
+/* MSTP8 */
+#define R8A7793_CLK_IPMMU_SGX		0
+#define R8A7793_CLK_VIN2		9
+#define R8A7793_CLK_VIN1		10
+#define R8A7793_CLK_VIN0		11
+#define R8A7793_CLK_ETHER		13
+#define R8A7793_CLK_SATA1		14
+#define R8A7793_CLK_SATA0		15
+
+/* MSTP9 */
+#define R8A7793_CLK_GPIO7		4
+#define R8A7793_CLK_GPIO6		5
+#define R8A7793_CLK_GPIO5		7
+#define R8A7793_CLK_GPIO4		8
+#define R8A7793_CLK_GPIO3		9
+#define R8A7793_CLK_GPIO2		10
+#define R8A7793_CLK_GPIO1		11
+#define R8A7793_CLK_GPIO0		12
+#define R8A7793_CLK_RCAN1		15
+#define R8A7793_CLK_RCAN0		16
+#define R8A7793_CLK_QSPI_MOD		17
+#define R8A7793_CLK_I2C5		25
+#define R8A7793_CLK_IICDVFS		26
+#define R8A7793_CLK_I2C4		27
+#define R8A7793_CLK_I2C3		28
+#define R8A7793_CLK_I2C2		29
+#define R8A7793_CLK_I2C1		30
+#define R8A7793_CLK_I2C0		31
+
+/* MSTP10 */
+#define R8A7793_CLK_SSI_ALL		5
+#define R8A7793_CLK_SSI9		6
+#define R8A7793_CLK_SSI8		7
+#define R8A7793_CLK_SSI7		8
+#define R8A7793_CLK_SSI6		9
+#define R8A7793_CLK_SSI5		10
+#define R8A7793_CLK_SSI4		11
+#define R8A7793_CLK_SSI3		12
+#define R8A7793_CLK_SSI2		13
+#define R8A7793_CLK_SSI1		14
+#define R8A7793_CLK_SSI0		15
+#define R8A7793_CLK_SCU_ALL		17
+#define R8A7793_CLK_SCU_DVC1		18
+#define R8A7793_CLK_SCU_DVC0		19
+#define R8A7793_CLK_SCU_SRC9		22
+#define R8A7793_CLK_SCU_SRC8		23
+#define R8A7793_CLK_SCU_SRC7		24
+#define R8A7793_CLK_SCU_SRC6		25
+#define R8A7793_CLK_SCU_SRC5		26
+#define R8A7793_CLK_SCU_SRC4		27
+#define R8A7793_CLK_SCU_SRC3		28
+#define R8A7793_CLK_SCU_SRC2		29
+#define R8A7793_CLK_SCU_SRC1		30
+#define R8A7793_CLK_SCU_SRC0		31
+
+/* MSTP11 */
+#define R8A7793_CLK_SCIFA3		6
+#define R8A7793_CLK_SCIFA4		7
+#define R8A7793_CLK_SCIFA5		8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7793_H__ */
diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
index b00bbc9c60b4..774dc1e843c5 100644
--- a/include/dt-bindings/pinctrl/am43xx.h
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -14,6 +14,7 @@
 #define MUX_MODE6	6
 #define MUX_MODE7	7
 #define MUX_MODE8	8
+#define MUX_MODE9	9
 
 #define PULL_DISABLE		(1 << 16)
 #define PULL_UP			(1 << 17)
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
index 7448edff4723..4379e29f0460 100644
--- a/include/dt-bindings/pinctrl/dra.h
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -30,6 +30,26 @@
 #define MUX_MODE14	0xe
 #define MUX_MODE15	0xf
 
+/* Certain pins need virtual mode, but note: they may glitch */
+#define MUX_VIRTUAL_MODE0	(MODE_SELECT | (0x0 << 4))
+#define MUX_VIRTUAL_MODE1	(MODE_SELECT | (0x1 << 4))
+#define MUX_VIRTUAL_MODE2	(MODE_SELECT | (0x2 << 4))
+#define MUX_VIRTUAL_MODE3	(MODE_SELECT | (0x3 << 4))
+#define MUX_VIRTUAL_MODE4	(MODE_SELECT | (0x4 << 4))
+#define MUX_VIRTUAL_MODE5	(MODE_SELECT | (0x5 << 4))
+#define MUX_VIRTUAL_MODE6	(MODE_SELECT | (0x6 << 4))
+#define MUX_VIRTUAL_MODE7	(MODE_SELECT | (0x7 << 4))
+#define MUX_VIRTUAL_MODE8	(MODE_SELECT | (0x8 << 4))
+#define MUX_VIRTUAL_MODE9	(MODE_SELECT | (0x9 << 4))
+#define MUX_VIRTUAL_MODE10	(MODE_SELECT | (0xa << 4))
+#define MUX_VIRTUAL_MODE11	(MODE_SELECT | (0xb << 4))
+#define MUX_VIRTUAL_MODE12	(MODE_SELECT | (0xc << 4))
+#define MUX_VIRTUAL_MODE13	(MODE_SELECT | (0xd << 4))
+#define MUX_VIRTUAL_MODE14	(MODE_SELECT | (0xe << 4))
+#define MUX_VIRTUAL_MODE15	(MODE_SELECT | (0xf << 4))
+
+#define MODE_SELECT		(1 << 8)
+
 #define PULL_ENA		(0 << 16)
 #define PULL_DIS		(1 << 16)
 #define PULL_UP			(1 << 17)
diff --git a/include/dt-bindings/reset/altr,rst-mgr-a10.h b/include/dt-bindings/reset/altr,rst-mgr-a10.h
new file mode 100644
index 000000000000..acb0bbf4f9f5
--- /dev/null
+++ b/include/dt-bindings/reset/altr,rst-mgr-a10.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
+
+/* MPUMODRST */
+#define CPU0_RESET		0
+#define CPU1_RESET		1
+#define WDS_RESET		2
+#define SCUPER_RESET		3
+
+/* PER0MODRST */
+#define EMAC0_RESET		32
+#define EMAC1_RESET		33
+#define EMAC2_RESET		34
+#define USB0_RESET		35
+#define USB1_RESET		36
+#define NAND_RESET		37
+#define QSPI_RESET		38
+#define SDMMC_RESET		39
+#define EMAC0_OCP_RESET		40
+#define EMAC1_OCP_RESET		41
+#define EMAC2_OCP_RESET		42
+#define USB0_OCP_RESET		43
+#define USB1_OCP_RESET		44
+#define NAND_OCP_RESET		45
+#define QSPI_OCP_RESET		46
+#define SDMMC_OCP_RESET		47
+#define DMA_RESET		48
+#define SPIM0_RESET		49
+#define SPIM1_RESET		50
+#define SPIS0_RESET		51
+#define SPIS1_RESET		52
+#define DMA_OCP_RESET		53
+#define EMAC_PTP_RESET		54
+/* 55 is empty*/
+#define DMAIF0_RESET		56
+#define DMAIF1_RESET		57
+#define DMAIF2_RESET		58
+#define DMAIF3_RESET		59
+#define DMAIF4_RESET		60
+#define DMAIF5_RESET		61
+#define DMAIF6_RESET		62
+#define DMAIF7_RESET		63
+
+/* PER1MODRST */
+#define L4WD0_RESET		64
+#define L4WD1_RESET		65
+#define L4SYSTIMER0_RESET	66
+#define L4SYSTIMER1_RESET	67
+#define SPTIMER0_RESET		68
+#define SPTIMER1_RESET		69
+/* 70-71 is reserved */
+#define I2C0_RESET		72
+#define I2C1_RESET		73
+#define I2C2_RESET		74
+#define I2C3_RESET		75
+#define I2C4_RESET		76
+/* 77-79 is reserved */
+#define UART0_RESET		80
+#define UART1_RESET		81
+/* 82-87 is reserved */
+#define GPIO0_RESET		88
+#define GPIO1_RESET		89
+#define GPIO2_RESET		90
+
+/* BRGMODRST */
+#define HPS2FPGA_RESET		96
+#define LWHPS2FPGA_RESET	97
+#define FPGA2HPS_RESET		98
+#define F2SSDRAM0_RESET		99
+#define F2SSDRAM1_RESET		100
+#define F2SSDRAM2_RESET		101
+#define DDRSCH_RESET		102
+
+/* SYSMODRST*/
+#define ROM_RESET		128
+#define OCRAM_RESET		129
+/* 130 is reserved */
+#define FPGAMGR_RESET		131
+#define S2F_RESET		132
+#define SYSDBG_RESET		133
+#define OCRAM_OCP_RESET		134
+
+/* COLDMODRST */
+#define CLKMGRCOLD_RESET	160
+/* 161-162 is reserved */
+#define S2FCOLD_RESET		163
+#define TIMESTAMPCOLD_RESET	164
+#define TAPCOLD_RESET		165
+#define HMCCOLD_RESET		166
+#define IOMGRCOLD_RESET		167
+
+/* NRSTMODRST */
+#define NRSTPINOE_RESET		192
+
+/* DBGMODRST */
+#define DBG_RESET		224
+#endif
author	Linus Torvalds <torvalds@linux-foundation.org>	2015-09-01 13:09:20 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2015-09-01 13:09:20 -0700
commit	b3a5af435ab4b860714b2f56c65fd506aa677e71 (patch)
tree	4673c2c4a4fe83783a7ee3ec782803452a4f0eb0
parent	102178108e2246cb4b329d3fb7872cd3d7120205 (diff)
parent	4c80a00388dd7b9d9e7ebf31e62b96c7b74178b8 (diff)
download	linux-b3a5af435ab4b860714b2f56c65fd506aa677e71.tar.bz2