diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2008-04-26 13:44:19 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-04-26 13:44:19 -0700 |
commit | a52b0d25a722e84da999005b75f972aa4824253c (patch) | |
tree | 4a3a48305f744e6bde2e3fd663a4473dd712049c | |
parent | 539a5fe22620a1665cce504167953a71a43232ad (diff) | |
parent | f37afdaca711838b50ecd89b9c15fc745270d77c (diff) | |
download | linux-a52b0d25a722e84da999005b75f972aa4824253c.tar.bz2 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (46 commits)
ide: constify struct ide_dma_ops
ide: add struct ide_dma_ops (take 3)
ide: add IDE_HFLAG_SERIALIZE_DMA host flag
sl82c105: check bridge revision in sl82c105_init_one()
au1xxx-ide: use ->init_dma method
palm_bk3710: use ->init_dma method
sgiioc4: use ->init_dma method
icside: use ->init_dma method
ide-pmac: use ->init_dma method
ide: do complete DMA setup in ->init_dma method (take 2)
au1xxx-ide: fix MWDMA support
ide: cleanup ide_setup_dma()
ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma()
ide: export ide_allocate_dma_engine()
ide: move ide_setup_dma() call out from ->init_dma method
alim15x3: skip DMA initialization completely on revs < 0x20
pdc202xx_old: remove init_dma_pdc202xx()
ide: don't display "BIOS" settings in ide_setup_dma()
ide: remove ->cds field from ide_hwif_t (take 2)
ide: remove ide_dma_iobase()
...
77 files changed, 1777 insertions, 1875 deletions
diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README index 5c8334123f4f..25a6ed1aaa5b 100644 --- a/Documentation/mips/AU1xxx_IDE.README +++ b/Documentation/mips/AU1xxx_IDE.README @@ -46,8 +46,6 @@ Two files are introduced: a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h' containes : struct _auide_hwif - struct drive_list_entry dma_white_list - struct drive_list_entry dma_black_list timing parameters for PIO mode 0/1/2/3/4 timing parameters for MWDMA 0/1/2 @@ -63,12 +61,6 @@ Four configs variables are introduced: CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size per descriptor -If MWDMA is enabled and the connected hard disc is not on the white list, the -kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE -performance is substantial slower then in full speed mwdma. In this case -please add your hard disc to the white list (follow instruction from 'ADD NEW -HARD DISC TO WHITE OR BLACK LIST' section). - SUPPORTED IDE MODES ------------------- @@ -120,44 +112,6 @@ CONFIG_IDEDMA_AUTO=y Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to disable the burst support on DBDMA controller. -ADD NEW HARD DISC TO WHITE OR BLACK LIST ----------------------------------------- - -Step 1 : detect the model name of your hard disc - - a) connect your hard disc to the AU1XXX - - b) boot your kernel and get the hard disc model. - - Example boot log: - - --snipped-- - Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 - ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx - Au1xxx IDE(builtin) configured for MWDMA2 - Probing IDE interface ide0... - hda: Maxtor 6E040L0, ATA DISK drive - ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64 - hda: max request size: 64KiB - hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA - --snipped-- - - In this example 'Maxtor 6E040L0'. - -Step 2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h' - - Add your hard disc to the dma_white_list or dma_black_list structur. - -Step 3 : Recompile the kernel - - Enable MWDMA support in the kernel configuration. Recompile the kernel and - reboot. - -Step 4 : Tests - - If you have add a hard disc to the white list, please run some stress tests - for verification. - ACKNOWLEDGMENTS --------------- diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index a80b9574865e..d158f579bde2 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -55,8 +55,7 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq) ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; - hwif->quirkproc = NULL; + hwif->port_ops = NULL; idx[0] = i; diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index fd12bbe93f11..7d642f44e35b 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -191,6 +191,10 @@ static void icside_maskproc(ide_drive_t *drive, int mask) local_irq_restore(flags); } +static const struct ide_port_ops icside_v6_no_dma_port_ops = { + .maskproc = icside_maskproc, +}; + #ifdef CONFIG_BLK_DEV_IDEDMA_ICS /* * SG-DMA support. @@ -266,6 +270,11 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data); } +static const struct ide_port_ops icside_v6_port_ops = { + .set_dma_mode = icside_set_dma_mode, + .maskproc = icside_maskproc, +}; + static void icside_dma_host_set(ide_drive_t *drive, int on) { } @@ -375,25 +384,33 @@ static void icside_dma_lost_irq(ide_drive_t *drive) printk(KERN_ERR "%s: IRQ lost\n", drive->name); } -static void icside_dma_init(ide_hwif_t *hwif) +static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { hwif->dmatable_cpu = NULL; hwif->dmatable_dma = 0; - hwif->set_dma_mode = icside_set_dma_mode; - - hwif->dma_host_set = icside_dma_host_set; - hwif->dma_setup = icside_dma_setup; - hwif->dma_exec_cmd = icside_dma_exec_cmd; - hwif->dma_start = icside_dma_start; - hwif->ide_dma_end = icside_dma_end; - hwif->ide_dma_test_irq = icside_dma_test_irq; - hwif->dma_timeout = icside_dma_timeout; - hwif->dma_lost_irq = icside_dma_lost_irq; + + return 0; } + +static const struct ide_dma_ops icside_v6_dma_ops = { + .dma_host_set = icside_dma_host_set, + .dma_setup = icside_dma_setup, + .dma_exec_cmd = icside_dma_exec_cmd, + .dma_start = icside_dma_start, + .dma_end = icside_dma_end, + .dma_test_irq = icside_dma_test_irq, + .dma_timeout = icside_dma_timeout, + .dma_lost_irq = icside_dma_lost_irq, +}; #else -#define icside_dma_init(hwif) (0) +#define icside_v6_dma_ops NULL #endif +static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) +{ + return -EOPNOTSUPP; +} + static ide_hwif_t * icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *ec) { @@ -408,7 +425,6 @@ icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *e * Ensure we're using MMIO */ default_hwif_mmiops(hwif); - hwif->mmio = 1; for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { hwif->io_ports[i] = port; @@ -416,7 +432,6 @@ icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *e } hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset; hwif->irq = ec->irq; - hwif->noprobe = 0; hwif->chipset = ide_acorn; hwif->gendev.parent = &ec->dev; hwif->dev = &ec->dev; @@ -462,8 +477,10 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) } static const struct ide_port_info icside_v6_port_info __initdata = { + .init_dma = icside_dma_off_init, + .port_ops = &icside_v6_no_dma_port_ops, + .dma_ops = &icside_v6_dma_ops, .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ IDE_HFLAG_NO_AUTOTUNE, .mwdma_mask = ATA_MWDMA2, .swdma_mask = ATA_SWDMA2, @@ -526,7 +543,6 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) state->hwif[0] = hwif; state->hwif[1] = mate; - hwif->maskproc = icside_maskproc; hwif->hwif_data = state; hwif->config_data = (unsigned long)ioc_base; hwif->select_data = sel; @@ -537,10 +553,10 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) mate->select_data = sel | 1; if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) { - icside_dma_init(hwif); - icside_dma_init(mate); - } else - d.mwdma_mask = d.swdma_mask = 0; + d.init_dma = icside_dma_init; + d.port_ops = &icside_v6_dma_port_ops; + d.dma_ops = NULL; + } idx[0] = hwif->index; idx[1] = mate->index; diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 82643df7c49a..4263ffd4ab20 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -14,6 +14,8 @@ #include <asm/mach-types.h> #include <asm/irq.h> +#define DRV_NAME "ide_arm" + #ifdef CONFIG_ARCH_CLPS7500 # include <asm/arch/hardware.h> # @@ -28,10 +30,24 @@ static int __init ide_arm_init(void) { ide_hwif_t *hwif; hw_regs_t hw; + unsigned long base = IDE_ARM_IO, ctl = IDE_ARM_IO + 0x206; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + if (!request_region(base, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + DRV_NAME, base, base + 7); + return -EBUSY; + } + + if (!request_region(ctl, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + DRV_NAME, ctl); + release_region(base, 8); + return -EBUSY; + } + memset(&hw, 0, sizeof(hw)); - ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206); + ide_std_init_ports(&hw, base, ctl); hw.irq = IDE_ARM_IRQ; hwif = ide_find_port(); diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 666df779a5f4..8fa34e26443a 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -317,17 +317,31 @@ static u8 __devinit palm_bk3710_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA80; } -static void __devinit palm_bk3710_init_hwif(ide_hwif_t *hwif) +static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) { - hwif->set_pio_mode = palm_bk3710_set_pio_mode; - hwif->set_dma_mode = palm_bk3710_set_dma_mode; + unsigned long base = + hwif->io_ports[IDE_DATA_OFFSET] - IDE_PALM_ATA_PRI_REG_OFFSET; - hwif->cable_detect = palm_bk3710_cable_detect; + printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); + + if (ide_allocate_dma_engine(hwif)) + return -1; + + ide_setup_dma(hwif, base); + + return 0; } +static const struct ide_port_ops palm_bk3710_ports_ops = { + .set_pio_mode = palm_bk3710_set_pio_mode, + .set_dma_mode = palm_bk3710_set_dma_mode, + .cable_detect = palm_bk3710_cable_detect, +}; + static const struct ide_port_info __devinitdata palm_bk3710_port_info = { - .init_hwif = palm_bk3710_init_hwif, - .host_flags = IDE_HFLAG_NO_DMA, /* hack (no PCI) */ + .init_dma = palm_bk3710_init_dma, + .port_ops = &palm_bk3710_ports_ops, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA4, /* (input clk 99MHz) */ .mwdma_mask = ATA_MWDMA2, @@ -394,8 +408,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) hwif->mmio = 1; default_hwif_mmiops(hwif); - ide_setup_dma(hwif, mem->start); - idx[0] = i; ide_device_add(idx, &palm_bk3710_port_info); diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index 2c3d0ec91dc3..c0581bd98d0d 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -53,7 +53,6 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; default_hwif_mmiops(hwif); idx[0] = hwif->index; diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 790a7759d455..a62ca75c7e28 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -673,11 +673,6 @@ cris_ide_inb(unsigned long reg) return (unsigned char)cris_ide_inw(reg); } -static int cris_dma_end (ide_drive_t *drive); -static int cris_dma_setup (ide_drive_t *drive); -static void cris_dma_exec_cmd (ide_drive_t *drive, u8 command); -static int cris_dma_test_irq(ide_drive_t *drive); -static void cris_dma_start(ide_drive_t *drive); static void cris_ide_input_data (ide_drive_t *drive, void *, unsigned int); static void cris_ide_output_data (ide_drive_t *drive, void *, unsigned int); static void cris_atapi_input_bytes(ide_drive_t *drive, void *, unsigned int); @@ -782,8 +777,17 @@ static void __init cris_setup_ports(hw_regs_t *hw, unsigned long base) hw->ack_intr = cris_ide_ack_intr; } +static const struct ide_port_ops cris_port_ops = { + .set_pio_mode = cris_set_pio_mode, + .set_dma_mode = cris_set_dma_mode, +}; + +static const struct ide_dma_ops cris_dma_ops; + static const struct ide_port_info cris_port_info __initdata = { .chipset = ide_etrax100, + .port_ops = &cris_port_ops, + .dma_ops = &cris_dma_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_DMA, /* no SFF-style DMA */ .pio_mask = ATA_PIO4, @@ -809,19 +813,11 @@ static int __init init_e100_ide(void) continue; ide_init_port_data(hwif, hwif->index); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; - hwif->set_pio_mode = &cris_set_pio_mode; - hwif->set_dma_mode = &cris_set_dma_mode; + hwif->ata_input_data = &cris_ide_input_data; hwif->ata_output_data = &cris_ide_output_data; hwif->atapi_input_bytes = &cris_atapi_input_bytes; hwif->atapi_output_bytes = &cris_atapi_output_bytes; - hwif->dma_host_set = &cris_dma_host_set; - hwif->ide_dma_end = &cris_dma_end; - hwif->dma_setup = &cris_dma_setup; - hwif->dma_exec_cmd = &cris_dma_exec_cmd; - hwif->ide_dma_test_irq = &cris_dma_test_irq; - hwif->dma_start = &cris_dma_start; hwif->OUTB = &cris_ide_outb; hwif->OUTW = &cris_ide_outw; hwif->OUTBSYNC = &cris_ide_outbsync; @@ -1076,6 +1072,15 @@ static void cris_dma_start(ide_drive_t *drive) } } +static const struct ide_dma_ops cris_dma_ops = { + .dma_host_set = cris_dma_host_set, + .dma_setup = cris_dma_setup, + .dma_exec_cmd = cris_dma_exec_cmd, + .dma_start = cris_dma_start, + .dma_end = cris_dma_end, + .dma_test_irq = cris_dma_test_irq, +}; + module_init(init_e100_ide); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index 92b02b96d7db..0708b29cdb17 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -74,7 +74,6 @@ static inline void hwif_setup(ide_hwif_t *hwif) { default_hwif_iops(hwif); - hwif->mmio = 1; hwif->OUTW = mm_outw; hwif->OUTSW = mm_outsw; hwif->INW = mm_inw; diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 0f6fb6b72dd9..e4ad26e4fce7 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -55,7 +55,7 @@ struct ide_acpi_hwif_link { /* note: adds function name and KERN_DEBUG */ #ifdef DEBUGGING #define DEBPRINT(fmt, args...) \ - printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ## args) + printk(KERN_DEBUG "%s: " fmt, __func__, ## args) #else #define DEBPRINT(fmt, args...) do {} while (0) #endif /* DEBUGGING */ @@ -309,7 +309,7 @@ static int do_drive_get_GTF(ide_drive_t *drive, if (ACPI_FAILURE(status)) { printk(KERN_DEBUG "%s: Run _GTF error: status = 0x%x\n", - __FUNCTION__, status); + __func__, status); goto out; } @@ -335,7 +335,7 @@ static int do_drive_get_GTF(ide_drive_t *drive, out_obj->buffer.length % REGS_PER_GTF) { printk(KERN_ERR "%s: unexpected GTF length (%d) or addr (0x%p)\n", - __FUNCTION__, out_obj->buffer.length, + __func__, out_obj->buffer.length, out_obj->buffer.pointer); err = -ENOENT; kfree(output.pointer); @@ -384,7 +384,7 @@ static int taskfile_load_raw(ide_drive_t *drive, err = ide_no_data_taskfile(drive, &args); if (err) printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n", - __FUNCTION__, err); + __func__, err); return err; } @@ -422,7 +422,7 @@ static int do_drive_set_taskfiles(ide_drive_t *drive, if (gtf_length % REGS_PER_GTF) { printk(KERN_ERR "%s: unexpected GTF length (%d)\n", - __FUNCTION__, gtf_length); + __func__, gtf_length); goto out; } @@ -547,7 +547,7 @@ void ide_acpi_get_timing(ide_hwif_t *hwif) printk(KERN_ERR "%s: unexpected _GTM length (0x%x)[should be 0x%zx] or " "addr (0x%p)\n", - __FUNCTION__, out_obj->buffer.length, + __func__, out_obj->buffer.length, sizeof(struct GTM_buffer), out_obj->buffer.pointer); return; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 1afd95ad4653..ad984322da94 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -39,12 +39,13 @@ #include <linux/mutex.h> #include <linux/bcd.h> -#include <scsi/scsi.h> /* For SCSI -> ATAPI command conversion */ +/* For SCSI -> ATAPI command conversion */ +#include <scsi/scsi.h> -#include <asm/irq.h> -#include <asm/io.h> +#include <linux/irq.h> +#include <linux/io.h> #include <asm/byteorder.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <asm/unaligned.h> #include "ide-cd.h" @@ -77,12 +78,11 @@ static void ide_cd_put(struct cdrom_info *cd) mutex_unlock(&idecd_ref_mutex); } -/**************************************************************************** +/* * Generic packet command support and error handling routines. */ -/* Mark that we've seen a media change, and invalidate our internal - buffers. */ +/* Mark that we've seen a media change and invalidate our internal buffers. */ static void cdrom_saw_media_change(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; @@ -105,9 +105,8 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, break; case NOT_READY: /* - * don't care about tray state messages for - * e.g. capacity commands or in-progress or - * becoming ready + * don't care about tray state messages for e.g. capacity + * commands or in-progress or becoming ready */ if (sense->asc == 0x3a || sense->asc == 0x04) break; @@ -115,8 +114,8 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, break; case ILLEGAL_REQUEST: /* - * don't log START_STOP unit with LoEj set, since - * we cannot reliably check if drive can auto-close + * don't log START_STOP unit with LoEj set, since we cannot + * reliably check if drive can auto-close */ if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24) break; @@ -124,9 +123,9 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, break; case UNIT_ATTENTION: /* - * Make good and sure we've seen this potential media - * change. Some drives (i.e. Creative) fail to present - * the correct sense key in the error register. + * Make good and sure we've seen this potential media change. + * Some drives (i.e. Creative) fail to present the correct sense + * key in the error register. */ cdrom_saw_media_change(drive); break; @@ -137,8 +136,7 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, return log; } -static -void cdrom_analyze_sense_data(ide_drive_t *drive, +static void cdrom_analyze_sense_data(ide_drive_t *drive, struct request *failed_command, struct request_sense *sense) { @@ -151,15 +149,16 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, return; /* - * If a read toc is executed for a CD-R or CD-RW medium where - * the first toc has not been recorded yet, it will fail with - * 05/24/00 (which is a confusing error) + * If a read toc is executed for a CD-R or CD-RW medium where the first + * toc has not been recorded yet, it will fail with 05/24/00 (which is a + * confusing error) */ if (failed_command && failed_command->cmd[0] == GPCMD_READ_TOC_PMA_ATIP) if (sense->sense_key == 0x05 && sense->asc == 0x24) return; - if (sense->error_code == 0x70) { /* Current Error */ + /* current error */ + if (sense->error_code == 0x70) { switch (sense->sense_key) { case MEDIUM_ERROR: case VOLUME_OVERFLOW: @@ -178,25 +177,23 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, if (bio_sectors < 4) bio_sectors = 4; if (drive->queue->hardsect_size == 2048) - sector <<= 2; /* Device sector size is 2K */ + /* device sector size is 2K */ + sector <<= 2; sector &= ~(bio_sectors - 1); valid = (sector - failed_command->sector) << 9; if (valid < 0) valid = 0; if (sector < get_capacity(info->disk) && - drive->probed_capacity - sector < 4 * 75) { + drive->probed_capacity - sector < 4 * 75) set_capacity(info->disk, sector); - } } } ide_cd_log_error(drive->name, failed_command, sense); } -/* - * Initialize a ide-cd packet command request - */ +/* Initialize a ide-cd packet command request */ void ide_cd_init_rq(ide_drive_t *drive, struct request *rq) { struct cdrom_info *cd = drive->driver_data; @@ -220,7 +217,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, rq->data = sense; rq->cmd[0] = GPCMD_REQUEST_SENSE; - rq->cmd[4] = rq->data_len = 18; + rq->cmd[4] = 18; + rq->data_len = 18; rq->cmd_type = REQ_TYPE_SENSE; @@ -252,7 +250,7 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate) } cdrom_analyze_sense_data(drive, failed, sense); /* - * now end failed request + * now end the failed request */ if (blk_fs_request(failed)) { if (ide_end_dequeued_request(drive, failed, 0, @@ -280,21 +278,24 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate) ide_end_request(drive, uptodate, nsectors); } -static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 stat) +static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 st) { - if (stat & 0x80) + if (st & 0x80) return; - ide_dump_status(drive, msg, stat); + ide_dump_status(drive, msg, st); } -/* Returns 0 if the request should be continued. - Returns 1 if the request was ended. */ +/* + * Returns: + * 0: if the request should be continued. + * 1: if the request was ended. + */ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) { struct request *rq = HWGROUP(drive)->rq; int stat, err, sense_key; - /* Check for errors. */ + /* check for errors */ stat = ide_read_status(drive); if (stat_ret) @@ -303,20 +304,22 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) if (OK_STAT(stat, good_stat, BAD_R_STAT)) return 0; - /* Get the IDE error register. */ + /* get the IDE error register */ err = ide_read_error(drive); sense_key = err >> 4; if (rq == NULL) { - printk("%s: missing rq in cdrom_decode_status\n", drive->name); + printk(KERN_ERR "%s: missing rq in %s\n", + drive->name, __func__); return 1; } if (blk_sense_request(rq)) { - /* We got an error trying to get sense info - from the drive (probably while trying - to recover from a former error). Just give up. */ - + /* + * We got an error trying to get sense info from the drive + * (probably while trying to recover from a former error). + * Just give up. + */ rq->cmd_flags |= REQ_FAILED; cdrom_end_request(drive, 0); ide_error(drive, "request sense failure", stat); @@ -332,13 +335,12 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) if (blk_pc_request(rq) && !rq->errors) rq->errors = SAM_STAT_CHECK_CONDITION; - /* Check for tray open. */ + /* check for tray open */ if (sense_key == NOT_READY) { cdrom_saw_media_change(drive); } else if (sense_key == UNIT_ATTENTION) { - /* Check for media change. */ + /* check for media change */ cdrom_saw_media_change(drive); - /*printk("%s: media changed\n",drive->name);*/ return 0; } else if (sense_key == ILLEGAL_REQUEST && rq->cmd[0] == GPCMD_START_STOP_UNIT) { @@ -350,7 +352,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) * cdrom_log_sense() knows this! */ } else if (!(rq->cmd_flags & REQ_QUIET)) { - /* Otherwise, print an error. */ + /* otherwise, print an error */ ide_dump_status(drive, "packet command error", stat); } @@ -366,27 +368,30 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) } else if (blk_fs_request(rq)) { int do_end_request = 0; - /* Handle errors from READ and WRITE requests. */ + /* handle errors from READ and WRITE requests */ if (blk_noretry_request(rq)) do_end_request = 1; if (sense_key == NOT_READY) { - /* Tray open. */ + /* tray open */ if (rq_data_dir(rq) == READ) { cdrom_saw_media_change(drive); - /* Fail the request. */ - printk("%s: tray open\n", drive->name); + /* fail the request */ + printk(KERN_ERR "%s: tray open\n", drive->name); do_end_request = 1; } else { struct cdrom_info *info = drive->driver_data; - /* allow the drive 5 seconds to recover, some + /* + * Allow the drive 5 seconds to recover, some * devices will return this error while flushing - * data from cache */ + * data from cache. + */ if (!rq->errors) - info->write_timeout = jiffies + ATAPI_WAIT_WRITE_BUSY; + info->write_timeout = jiffies + + ATAPI_WAIT_WRITE_BUSY; rq->errors = 1; if (time_after(jiffies, info->write_timeout)) do_end_request = 1; @@ -394,65 +399,68 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) unsigned long flags; /* - * take a breather relying on the - * unplug timer to kick us again + * take a breather relying on the unplug + * timer to kick us again */ spin_lock_irqsave(&ide_lock, flags); blk_plug_device(drive->queue); - spin_unlock_irqrestore(&ide_lock, flags); + spin_unlock_irqrestore(&ide_lock, + flags); return 1; } } } else if (sense_key == UNIT_ATTENTION) { - /* Media change. */ - cdrom_saw_media_change (drive); + /* media change */ + cdrom_saw_media_change(drive); /* - * Arrange to retry the request. - * But be sure to give up if we've retried - * too many times. + * Arrange to retry the request but be sure to give up + * if we've retried too many times. */ if (++rq->errors > ERROR_MAX) do_end_request = 1; } else if (sense_key == ILLEGAL_REQUEST || sense_key == DATA_PROTECT) { /* - * No point in retrying after an illegal - * request or data protect error. + * No point in retrying after an illegal request or data + * protect error. */ ide_dump_status_no_sense(drive, "command error", stat); do_end_request = 1; } else if (sense_key == MEDIUM_ERROR) { /* * No point in re-trying a zillion times on a bad - * sector... If we got here the error is not correctable + * sector. If we got here the error is not correctable. */ - ide_dump_status_no_sense(drive, "media error (bad sector)", stat); + ide_dump_status_no_sense(drive, + "media error (bad sector)", + stat); do_end_request = 1; } else if (sense_key == BLANK_CHECK) { - /* Disk appears blank ?? */ - ide_dump_status_no_sense(drive, "media error (blank)", stat); + /* disk appears blank ?? */ + ide_dump_status_no_sense(drive, "media error (blank)", + stat); do_end_request = 1; } else if ((err & ~ABRT_ERR) != 0) { - /* Go to the default handler - for other errors. */ + /* go to the default handler for other errors */ ide_error(drive, "cdrom_decode_status", stat); return 1; } else if ((++rq->errors > ERROR_MAX)) { - /* We've racked up too many retries. Abort. */ + /* we've racked up too many retries, abort */ do_end_request = 1; } - /* End a request through request sense analysis when we have - sense data. We need this in order to perform end of media - processing */ - + /* + * End a request through request sense analysis when we have + * sense data. We need this in order to perform end of media + * processing. + */ if (do_end_request) goto end_request; /* - * If we got a CHECK_CONDITION status, - * queue a request sense command. + * If we got a CHECK_CONDITION status, queue + * a request sense command. */ if (stat & ERR_STAT) cdrom_queue_request_sense(drive, NULL, NULL); @@ -461,7 +469,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) cdrom_end_request(drive, 0); } - /* Retry, or handle the next request. */ + /* retry, or handle the next request */ return 1; end_request: @@ -486,10 +494,10 @@ static int cdrom_timer_expiry(ide_drive_t *drive) unsigned long wait = 0; /* - * Some commands are *slow* and normally take a long time to - * complete. Usually we can use the ATAPI "disconnect" to bypass - * this, but not all commands/drives support that. Let - * ide_timer_expiry keep polling us for these. + * Some commands are *slow* and normally take a long time to complete. + * Usually we can use the ATAPI "disconnect" to bypass this, but not all + * commands/drives support that. Let ide_timer_expiry keep polling us + * for these. */ switch (rq->cmd[0]) { case GPCMD_BLANK: @@ -501,20 +509,22 @@ static int cdrom_timer_expiry(ide_drive_t *drive) break; default: if (!(rq->cmd_flags & REQ_QUIET)) - printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n", rq->cmd[0]); + printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n", + rq->cmd[0]); wait = 0; break; } return wait; } -/* Set up the device registers for transferring a packet command on DEV, - expecting to later transfer XFERLEN bytes. HANDLER is the routine - which actually transfers the command to the drive. If this is a - drq_interrupt device, this routine will arrange for HANDLER to be - called when the interrupt from the drive arrives. Otherwise, HANDLER - will be called immediately after the drive is prepared for the transfer. */ - +/* + * Set up the device registers for transferring a packet command on DEV, + * expecting to later transfer XFERLEN bytes. HANDLER is the routine + * which actually transfers the command to the drive. If this is a + * drq_interrupt device, this routine will arrange for HANDLER to be + * called when the interrupt from the drive arrives. Otherwise, HANDLER + * will be called immediately after the drive is prepared for the transfer. + */ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, int xferlen, ide_handler_t *handler) @@ -523,15 +533,15 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, struct cdrom_info *info = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - /* Wait for the controller to be idle. */ + /* wait for the controller to be idle */ if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY)) return startstop; /* FIXME: for Virtual DMA we must check harder */ if (info->dma) - info->dma = !hwif->dma_setup(drive); + info->dma = !hwif->dma_ops->dma_setup(drive); - /* Set up the controller registers. */ + /* set up the controller registers */ ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL | IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma); @@ -541,7 +551,8 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, drive->waiting_for_dma = 0; /* packet command */ - ide_execute_command(drive, WIN_PACKETCMD, handler, ATAPI_WAIT_PC, cdrom_timer_expiry); + ide_execute_command(drive, WIN_PACKETCMD, handler, + ATAPI_WAIT_PC, cdrom_timer_expiry); return ide_started; } else { unsigned long flags; @@ -557,11 +568,12 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, } } -/* Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. - The device registers must have already been prepared - by cdrom_start_packet_command. - HANDLER is the interrupt handler to call when the command completes - or there's data ready. */ +/* + * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device + * registers must have already been prepared by cdrom_start_packet_command. + * HANDLER is the interrupt handler to call when the command completes or + * there's data ready. + */ #define ATAPI_MIN_CDB_BYTES 12 static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, struct request *rq, @@ -573,24 +585,26 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, ide_startstop_t startstop; if (info->cd_flags & IDE_CD_FLAG_DRQ_INTERRUPT) { - /* Here we should have been called after receiving an interrupt - from the device. DRQ should how be set. */ + /* + * Here we should have been called after receiving an interrupt + * from the device. DRQ should how be set. + */ - /* Check for errors. */ + /* check for errors */ if (cdrom_decode_status(drive, DRQ_STAT, NULL)) return ide_stopped; - /* Ok, next interrupt will be DMA interrupt. */ + /* ok, next interrupt will be DMA interrupt */ if (info->dma) drive->waiting_for_dma = 1; } else { - /* Otherwise, we must wait for DRQ to get set. */ + /* otherwise, we must wait for DRQ to get set */ if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) return startstop; } - /* Arm the interrupt handler. */ + /* arm the interrupt handler */ ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry); /* ATAPI commands get padded out to 12 bytes minimum */ @@ -598,20 +612,19 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, if (cmd_len < ATAPI_MIN_CDB_BYTES) cmd_len = ATAPI_MIN_CDB_BYTES; - /* Send the command to the device. */ + /* send the command to the device */ HWIF(drive)->atapi_output_bytes(drive, rq->cmd, cmd_len); - /* Start the DMA if need be */ + /* start the DMA if need be */ if (info->dma) - hwif->dma_start(drive); + hwif->dma_ops->dma_start(drive); return ide_started; } -/**************************************************************************** +/* * Block read functions. */ - static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len) { while (len > 0) { @@ -649,20 +662,21 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, ide_hwif_t *hwif = drive->hwif; xfer_func_t *xf; - /* Whoops... */ + /* whoops... */ printk(KERN_ERR "%s: %s: wrong transfer direction!\n", drive->name, __func__); xf = rw ? hwif->atapi_output_bytes : hwif->atapi_input_bytes; ide_cd_pad_transfer(drive, xf, len); } else if (rw == 0 && ireason == 1) { - /* Some drives (ASUS) seem to tell us that status - * info is available. just get it and ignore. + /* + * Some drives (ASUS) seem to tell us that status info is + * available. Just get it and ignore. */ (void)ide_read_status(drive); return 0; } else { - /* Drive wants a command packet, or invalid ireason... */ + /* drive wants a command packet, or invalid ireason... */ printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n", drive->name, __func__, ireason); } @@ -702,10 +716,10 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len) static ide_startstop_t cdrom_newpc_intr(ide_drive_t *); /* - * Routine to send a read/write packet command to the drive. - * This is usually called directly from cdrom_start_{read,write}(). - * However, for drq_interrupt devices, it is called from an interrupt - * when the drive is ready to accept the command. + * Routine to send a read/write packet command to the drive. This is usually + * called directly from cdrom_start_{read,write}(). However, for drq_interrupt + * devices, it is called from an interrupt when the drive is ready to accept + * the command. */ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) { @@ -727,7 +741,7 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) * is larger than the buffer size. */ if (nskip > 0) { - /* Sanity check... */ + /* sanity check... */ if (rq->current_nr_sectors != bio_cur_sectors(rq->bio)) { printk(KERN_ERR "%s: %s: buffer botch (%u)\n", @@ -744,10 +758,10 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) /* the immediate bit */ rq->cmd[1] = 1 << 3; #endif - /* Set up the command */ + /* set up the command */ rq->timeout = ATAPI_WAIT_PC; - /* Send the command to the drive and return. */ + /* send the command to the drive and return */ return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); } @@ -767,14 +781,8 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive) info->cd_flags |= IDE_CD_FLAG_SEEKING; if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) { - if (--retry == 0) { - /* - * this condition is far too common, to bother - * users about it - */ - /* printk("%s: disabled DSC seek overlap\n", drive->name);*/ + if (--retry == 0) drive->dsc_overlap = 0; - } } return ide_stopped; } @@ -800,32 +808,34 @@ static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block) info->dma = 0; info->start_seek = jiffies; - return cdrom_start_packet_command(drive, 0, cdrom_start_seek_continuation); + return cdrom_start_packet_command(drive, 0, + cdrom_start_seek_continuation); } /* - * Fix up a possibly partially-processed request so that we can - * start it over entirely, or even put it back on the request queue. + * Fix up a possibly partially-processed request so that we can start it over + * entirely, or even put it back on the request queue. */ static void restore_request(struct request *rq) { if (rq->buffer != bio_data(rq->bio)) { - sector_t n = (rq->buffer - (char *) bio_data(rq->bio)) / SECTOR_SIZE; + sector_t n = + (rq->buffer - (char *)bio_data(rq->bio)) / SECTOR_SIZE; rq->buffer = bio_data(rq->bio); rq->nr_sectors += n; rq->sector -= n; } - rq->hard_cur_sectors = rq->current_nr_sectors = bio_cur_sectors(rq->bio); + rq->current_nr_sectors = bio_cur_sectors(rq->bio); + rq->hard_cur_sectors = rq->current_nr_sectors; rq->hard_nr_sectors = rq->nr_sectors; rq->hard_sector = rq->sector; rq->q->prep_rq_fn(rq->q, rq); } -/**************************************************************************** - * Execute all other packet commands. +/* + * All other packet commands. */ - static void ide_cd_request_sense_fixup(struct request *rq) { /* @@ -849,7 +859,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) if (rq->sense == NULL) rq->sense = &sense; - /* Start of retry loop. */ + /* start of retry loop */ do { int error; unsigned long time = jiffies; @@ -858,41 +868,45 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) error = ide_do_drive_cmd(drive, rq, ide_wait); time = jiffies - time; - /* FIXME: we should probably abort/retry or something - * in case of failure */ + /* + * FIXME: we should probably abort/retry or something in case of + * failure. + */ if (rq->cmd_flags & REQ_FAILED) { - /* The request failed. Retry if it was due to a unit - attention status - (usually means media was changed). */ + /* + * The request failed. Retry if it was due to a unit + * attention status (usually means media was changed). + */ struct request_sense *reqbuf = rq->sense; if (reqbuf->sense_key == UNIT_ATTENTION) cdrom_saw_media_change(drive); else if (reqbuf->sense_key == NOT_READY && reqbuf->asc == 4 && reqbuf->ascq != 4) { - /* The drive is in the process of loading - a disk. Retry, but wait a little to give - the drive time to complete the load. */ + /* + * The drive is in the process of loading + * a disk. Retry, but wait a little to give + * the drive time to complete the load. + */ ssleep(2); } else { - /* Otherwise, don't retry. */ + /* otherwise, don't retry */ retries = 0; } --retries; } - /* End of retry loop. */ + /* end of retry loop */ } while ((rq->cmd_flags & REQ_FAILED) && retries >= 0); - /* Return an error if the command failed. */ + /* return an error if the command failed */ return (rq->cmd_flags & REQ_FAILED) ? -EIO : 0; } /* - * Called from blk_end_request_callback() after the data of the request - * is completed and before the request is completed. - * By returning value '1', blk_end_request_callback() returns immediately - * without completing the request. + * Called from blk_end_request_callback() after the data of the request is + * completed and before the request itself is completed. By returning value '1', + * blk_end_request_callback() returns immediately without completing it. */ static int cdrom_newpc_intr_dummy_cb(struct request *rq) { @@ -911,11 +925,11 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) unsigned int timeout; u8 lowcyl, highcyl; - /* Check for errors. */ + /* check for errors */ dma = info->dma; if (dma) { info->dma = 0; - dma_error = HWIF(drive)->ide_dma_end(drive); + dma_error = hwif->dma_ops->dma_end(drive); if (dma_error) { printk(KERN_ERR "%s: DMA %s error\n", drive->name, write ? "write" : "read"); @@ -926,9 +940,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (cdrom_decode_status(drive, 0, &stat)) return ide_stopped; - /* - * using dma, transfer is complete now - */ + /* using dma, transfer is complete now */ if (dma) { if (dma_error) return ide_error(drive, "dma error", stat); @@ -939,9 +951,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) goto end_request; } - /* - * ok we fall to pio :/ - */ + /* ok we fall to pio :/ */ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]) & 0x3; lowcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]); highcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]); @@ -952,9 +962,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (thislen > len) thislen = len; - /* - * If DRQ is clear, the command has completed. - */ + /* If DRQ is clear, the command has completed. */ if ((stat & DRQ_STAT) == 0) { if (blk_fs_request(rq)) { /* @@ -975,15 +983,13 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) return ide_stopped; } else if (!blk_pc_request(rq)) { ide_cd_request_sense_fixup(rq); - /* Complain if we still have data left to transfer. */ + /* complain if we still have data left to transfer */ uptodate = rq->data_len ? 0 : 1; } goto end_request; } - /* - * check which way to transfer data - */ + /* check which way to transfer data */ if (ide_cd_check_ireason(drive, rq, len, ireason, write)) return ide_stopped; @@ -1019,16 +1025,12 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) xferfunc = HWIF(drive)->atapi_input_bytes; } - /* - * transfer data - */ + /* transfer data */ while (thislen > 0) { u8 *ptr = blk_fs_request(rq) ? NULL : rq->data; int blen = rq->data_len; - /* - * bio backed? - */ + /* bio backed? */ if (rq->bio) { if (blk_fs_request(rq)) { ptr = rq->buffer; @@ -1043,7 +1045,8 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (blk_fs_request(rq) && !write) /* * If the buffers are full, pipe the rest into - * oblivion. */ + * oblivion. + */ ide_cd_drain_data(drive, thislen >> 9); else { printk(KERN_ERR "%s: confused, missing data\n", @@ -1090,9 +1093,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) rq->sense_len += blen; } - /* - * pad, if necessary - */ + /* pad, if necessary */ if (!blk_fs_request(rq) && len > 0) ide_cd_pad_transfer(drive, xferfunc, len); @@ -1136,9 +1137,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) queue_hardsect_size(drive->queue) >> SECTOR_BITS; if (write) { - /* - * disk has become write protected - */ + /* disk has become write protected */ if (cd->disk->policy) { cdrom_end_request(drive, 0); return ide_stopped; @@ -1151,9 +1150,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) restore_request(rq); } - /* - * use DMA, if possible / writes *must* be hardware frame aligned - */ + /* use DMA, if possible / writes *must* be hardware frame aligned */ if ((rq->nr_sectors & (sectors_per_frame - 1)) || (rq->sector & (sectors_per_frame - 1))) { if (write) { @@ -1167,7 +1164,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) if (write) cd->devinfo.media_written = 1; - /* Start sending the read/write request to the drive. */ + /* start sending the read/write request to the drive */ return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont); } @@ -1192,12 +1189,11 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) info->dma = 0; - /* - * sg request - */ + /* sg request */ if (rq->bio) { int mask = drive->queue->dma_alignment; - unsigned long addr = (unsigned long) page_address(bio_page(rq->bio)); + unsigned long addr = + (unsigned long)page_address(bio_page(rq->bio)); info->dma = drive->using_dma; @@ -1211,15 +1207,16 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) info->dma = 0; } - /* Start sending the command to the drive. */ - return cdrom_start_packet_command(drive, rq->data_len, cdrom_do_newpc_cont); + /* start sending the command to the drive */ + return cdrom_start_packet_command(drive, rq->data_len, + cdrom_do_newpc_cont); } -/**************************************************************************** +/* * cdrom driver request routine. */ -static ide_startstop_t -ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block) +static ide_startstop_t ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, + sector_t block) { ide_startstop_t action; struct cdrom_info *info = drive->driver_data; @@ -1231,14 +1228,19 @@ ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block) if ((stat & SEEK_STAT) != SEEK_STAT) { if (elapsed < IDECD_SEEK_TIMEOUT) { - ide_stall_queue(drive, IDECD_SEEK_TIMER); + ide_stall_queue(drive, + IDECD_SEEK_TIMER); return ide_stopped; } - printk(KERN_ERR "%s: DSC timeout\n", drive->name); + printk(KERN_ERR "%s: DSC timeout\n", + drive->name); } info->cd_flags &= ~IDE_CD_FLAG_SEEKING; } - if ((rq_data_dir(rq) == READ) && IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && drive->dsc_overlap) + if (rq_data_dir(rq) == READ && + IDE_LARGE_SEEK(info->last_block, block, + IDECD_SEEK_THRESHOLD) && + drive->dsc_overlap) action = cdrom_start_seek(drive, block); else action = cdrom_start_rw(drive, rq); @@ -1248,9 +1250,7 @@ ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block) rq->cmd_type == REQ_TYPE_ATA_PC) { return cdrom_do_block_pc(drive, rq); } else if (blk_special_request(rq)) { - /* - * right now this can only be a reset... - */ + /* right now this can only be a reset... */ cdrom_end_request(drive, 1); return ide_stopped; } @@ -1262,18 +1262,16 @@ ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block) -/**************************************************************************** +/* * Ioctl handling. * - * Routines which queue packet commands take as a final argument a pointer - * to a request_sense struct. If execution of the command results - * in an error with a CHECK CONDITION status, this structure will be filled - * with the results of the subsequent request sense command. The pointer - * can also be NULL, in which case no sense information is returned. + * Routines which queue packet commands take as a final argument a pointer to a + * request_sense struct. If execution of the command results in an error with a + * CHECK CONDITION status, this structure will be filled with the results of the + * subsequent request sense command. The pointer can also be NULL, in which case + * no sense information is returned. */ - -static -void msf_from_bcd(struct atapi_msf *msf) +static void msf_from_bcd(struct atapi_msf *msf) { msf->minute = BCD2BIN(msf->minute); msf->second = BCD2BIN(msf->second); @@ -1293,8 +1291,8 @@ int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense) req.cmd_flags |= REQ_QUIET; /* - * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to - * switch CDs instead of supporting the LOAD_UNLOAD opcode. + * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs + * instead of supporting the LOAD_UNLOAD opcode. */ req.cmd[7] = cdi->sanyo_slot % 3; @@ -1370,36 +1368,39 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) unsigned long sectors_per_frame = SECTORS_PER_FRAME; if (toc == NULL) { - /* Try to allocate space. */ + /* try to allocate space */ toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL); if (toc == NULL) { - printk(KERN_ERR "%s: No cdrom TOC buffer!\n", drive->name); + printk(KERN_ERR "%s: No cdrom TOC buffer!\n", + drive->name); return -ENOMEM; } info->toc = toc; } - /* Check to see if the existing data is still valid. - If it is, just return. */ + /* + * Check to see if the existing data is still valid. If it is, + * just return. + */ (void) cdrom_check_status(drive, sense); if (info->cd_flags & IDE_CD_FLAG_TOC_VALID) return 0; - /* Try to get the total cdrom capacity and sector size. */ + /* try to get the total cdrom capacity and sector size */ stat = cdrom_read_capacity(drive, &toc->capacity, §ors_per_frame, sense); if (stat) toc->capacity = 0x1fffff; set_capacity(info->disk, toc->capacity * sectors_per_frame); - /* Save a private copy of te TOC capacity for error handling */ + /* save a private copy of the TOC capacity for error handling */ drive->probed_capacity = toc->capacity * sectors_per_frame; blk_queue_hardsect_size(drive->queue, sectors_per_frame << SECTOR_BITS); - /* First read just the header, so we know how long the TOC is. */ + /* first read just the header, so we know how long the TOC is */ stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr, sizeof(struct atapi_toc_header), sense); if (stat) @@ -1416,7 +1417,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) if (ntracks > MAX_TRACKS) ntracks = MAX_TRACKS; - /* Now read the whole schmeer. */ + /* now read the whole schmeer */ stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0, (char *)&toc->hdr, sizeof(struct atapi_toc_header) + @@ -1424,15 +1425,18 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) sizeof(struct atapi_toc_entry), sense); if (stat && toc->hdr.first_track > 1) { - /* Cds with CDI tracks only don't have any TOC entries, - despite of this the returned values are - first_track == last_track = number of CDI tracks + 1, - so that this case is indistinguishable from the same - layout plus an additional audio track. - If we get an error for the regular case, we assume - a CDI without additional audio tracks. In this case - the readable TOC is empty (CDI tracks are not included) - and only holds the Leadout entry. Heiko Eißfeldt */ + /* + * Cds with CDI tracks only don't have any TOC entries, despite + * of this the returned values are + * first_track == last_track = number of CDI tracks + 1, + * so that this case is indistinguishable from the same layout + * plus an additional audio track. If we get an error for the + * regular case, we assume a CDI without additional audio + * tracks. In this case the readable TOC is empty (CDI tracks + * are not included) and only holds the Leadout entry. + * + * Heiko Eißfeldt. + */ ntracks = 0; stat = cdrom_read_tocentry(drive, CDROM_LEADOUT, 1, 0, (char *)&toc->hdr, @@ -1473,9 +1477,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->ent[i].addr.msf.frame); } - /* Read the multisession information. */ if (toc->hdr.first_track != CDROM_LEADOUT) { - /* Read the multisession information. */ + /* read the multisession information */ stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp, sizeof(ms_tmp), sense); if (stat) @@ -1483,12 +1486,13 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->last_session_lba = be32_to_cpu(ms_tmp.ent.addr.lba); } else { - ms_tmp.hdr.first_track = ms_tmp.hdr.last_track = CDROM_LEADOUT; + ms_tmp.hdr.last_track = CDROM_LEADOUT; + ms_tmp.hdr.first_track = ms_tmp.hdr.last_track; toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */ } if (info->cd_flags & IDE_CD_FLAG_TOCADDR_AS_BCD) { - /* Re-read multisession information using MSF format */ + /* re-read multisession information using MSF format */ stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp, sizeof(ms_tmp), sense); if (stat) @@ -1502,7 +1506,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track); - /* Now try to get the total cdrom capacity. */ + /* now try to get the total cdrom capacity */ stat = cdrom_get_last_written(cdi, &last_written); if (!stat && (last_written > toc->capacity)) { toc->capacity = last_written; @@ -1527,7 +1531,8 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf) size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE; init_cdrom_command(&cgc, buf, size, CGC_DATA_UNKNOWN); - do { /* we seem to get stat=0x01,err=0x00 the first time (??) */ + do { + /* we seem to get stat=0x01,err=0x00 the first time (??) */ stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0); if (!stat) break; @@ -1596,8 +1601,7 @@ static int ide_cdrom_register(ide_drive_t *drive, int nslots) return register_cdrom(devinfo); } -static -int ide_cdrom_probe_capabilities(ide_drive_t *drive) +static int ide_cdrom_probe_capabilities(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; struct cdrom_device_info *cdi = &cd->devinfo; @@ -1611,7 +1615,8 @@ int ide_cdrom_probe_capabilities(ide_drive_t *drive) if (drive->media == ide_optical) { cdi->mask &= ~(CDC_MO_DRIVE | CDC_RAM); - printk(KERN_ERR "%s: ATAPI magneto-optical drive\n", drive->name); + printk(KERN_ERR "%s: ATAPI magneto-optical drive\n", + drive->name); return nslots; } @@ -1622,11 +1627,10 @@ int ide_cdrom_probe_capabilities(ide_drive_t *drive) } /* - * we have to cheat a little here. the packet will eventually - * be queued with ide_cdrom_packet(), which extracts the - * drive from cdi->handle. Since this device hasn't been - * registered with the Uniform layer yet, it can't do this. - * Same goes for cdi->ops. + * We have to cheat a little here. the packet will eventually be queued + * with ide_cdrom_packet(), which extracts the drive from cdi->handle. + * Since this device hasn't been registered with the Uniform layer yet, + * it can't do this. Same goes for cdi->ops. */ cdi->handle = drive; cdi->ops = &ide_cdrom_dops; @@ -1695,18 +1699,7 @@ int ide_cdrom_probe_capabilities(ide_drive_t *drive) return nslots; } -#ifdef CONFIG_IDE_PROC_FS -static void ide_cdrom_add_settings(ide_drive_t *drive) -{ - ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); -} -#else -static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; } -#endif - -/* - * standard prep_rq_fn that builds 10 byte cmds - */ +/* standard prep_rq_fn that builds 10 byte cmds */ static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq) { int hard_sect = queue_hardsect_size(q); @@ -1745,9 +1738,7 @@ static int ide_cdrom_prep_pc(struct request *rq) { u8 *c = rq->cmd; - /* - * Transform 6-byte read/write commands to the 10-byte version - */ + /* transform 6-byte read/write commands to the 10-byte version */ if (c[0] == READ_6 || c[0] == WRITE_6) { c[8] = c[4]; c[5] = c[3]; @@ -1789,6 +1780,41 @@ struct cd_list_entry { unsigned int cd_flags; }; +#ifdef CONFIG_IDE_PROC_FS +static sector_t ide_cdrom_capacity(ide_drive_t *drive) +{ + unsigned long capacity, sectors_per_frame; + + if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL)) + return 0; + + return capacity * sectors_per_frame; +} + +static int proc_idecd_read_capacity(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + ide_drive_t *drive = data; + int len; + + len = sprintf(page, "%llu\n", (long long)ide_cdrom_capacity(drive)); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +} + +static ide_proc_entry_t idecd_proc[] = { + { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL }, + { NULL, 0, NULL, NULL } +}; + +static void ide_cdrom_add_settings(ide_drive_t *drive) +{ + ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, + &drive->dsc_overlap, NULL); +} +#else +static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; } +#endif + static const struct cd_list_entry ide_cd_quirks_list[] = { /* Limit transfer size per interrupt. */ { "SAMSUNG CD-ROM SCR-2430", NULL, IDE_CD_FLAG_LIMIT_NFRAMES }, @@ -1846,8 +1872,7 @@ static unsigned int ide_cd_flags(struct hd_driveid *id) return 0; } -static -int ide_cdrom_setup(ide_drive_t *drive) +static int ide_cdrom_setup(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; struct cdrom_device_info *cdi = &cd->devinfo; @@ -1876,13 +1901,12 @@ int ide_cdrom_setup(ide_drive_t *drive) id->fw_rev[4] == '1' && id->fw_rev[6] <= '2') cd->cd_flags |= IDE_CD_FLAG_TOCTRACKS_AS_BCD; else if (cd->cd_flags & IDE_CD_FLAG_SANYO_3CD) - cdi->sanyo_slot = 3; /* 3 => use CD in slot 0 */ + /* 3 => use CD in slot 0 */ + cdi->sanyo_slot = 3; nslots = ide_cdrom_probe_capabilities(drive); - /* - * set correct block size - */ + /* set correct block size */ blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE); if (drive->autotune == IDE_TUNE_DEFAULT || @@ -1890,7 +1914,8 @@ int ide_cdrom_setup(ide_drive_t *drive) drive->dsc_overlap = (drive->next != drive); if (ide_cdrom_register(drive, nslots)) { - printk(KERN_ERR "%s: ide_cdrom_setup failed to register device with the cdrom driver.\n", drive->name); + printk(KERN_ERR "%s: %s failed to register device with the" + " cdrom driver.\n", drive->name, __func__); cd->devinfo.handle = NULL; return 1; } @@ -1929,33 +1954,6 @@ static void ide_cd_release(struct kref *kref) static int ide_cd_probe(ide_drive_t *); -#ifdef CONFIG_IDE_PROC_FS -static sector_t ide_cdrom_capacity(ide_drive_t *drive) -{ - unsigned long capacity, sectors_per_frame; - - if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL)) - return 0; - - return capacity * sectors_per_frame; -} - -static int proc_idecd_read_capacity - (char *page, char **start, off_t off, int count, int *eof, void *data) -{ - ide_drive_t *drive = data; - int len; - - len = sprintf(page, "%llu\n", (long long)ide_cdrom_capacity(drive)); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); -} - -static ide_proc_entry_t idecd_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL }, - { NULL, 0, NULL, NULL } -}; -#endif - static ide_driver_t ide_cdrom_driver = { .gen_driver = { .owner = THIS_MODULE, @@ -2093,7 +2091,7 @@ static struct block_device_operations idecd_ops = { .revalidate_disk = idecd_revalidate_disk }; -/* options */ +/* module options */ static char *ignore; module_param(ignore, charp, 0400); @@ -2114,17 +2112,20 @@ static int ide_cd_probe(ide_drive_t *drive) /* skip drives that we were told to ignore */ if (ignore != NULL) { if (strstr(ignore, drive->name)) { - printk(KERN_INFO "ide-cd: ignoring drive %s\n", drive->name); + printk(KERN_INFO "ide-cd: ignoring drive %s\n", + drive->name); goto failed; } } if (drive->scsi) { - printk(KERN_INFO "ide-cd: passing drive %s to ide-scsi emulation.\n", drive->name); + printk(KERN_INFO "ide-cd: passing drive %s to ide-scsi " + "emulation.\n", drive->name); goto failed; } info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL); if (info == NULL) { - printk(KERN_ERR "%s: Can't allocate a cdrom structure\n", drive->name); + printk(KERN_ERR "%s: Can't allocate a cdrom structure\n", + drive->name); goto failed; } diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 8757e5ef6c95..c352cf27b6e7 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -102,7 +102,7 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive) { u8 stat = 0, dma_stat = 0; - dma_stat = HWIF(drive)->ide_dma_end(drive); + dma_stat = drive->hwif->dma_ops->dma_end(drive); stat = ide_read_status(drive); if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) { @@ -394,7 +394,7 @@ void ide_dma_off_quietly(ide_drive_t *drive) drive->using_dma = 0; ide_toggle_bounce(drive, 0); - drive->hwif->dma_host_set(drive, 0); + drive->hwif->dma_ops->dma_host_set(drive, 0); } EXPORT_SYMBOL(ide_dma_off_quietly); @@ -427,7 +427,7 @@ void ide_dma_on(ide_drive_t *drive) drive->using_dma = 1; ide_toggle_bounce(drive, 1); - drive->hwif->dma_host_set(drive, 1); + drive->hwif->dma_ops->dma_host_set(drive, 1); } #ifdef CONFIG_BLK_DEV_IDEDMA_SFF @@ -482,11 +482,12 @@ int ide_dma_setup(ide_drive_t *drive) EXPORT_SYMBOL_GPL(ide_dma_setup); -static void ide_dma_exec_cmd(ide_drive_t *drive, u8 command) +void ide_dma_exec_cmd(ide_drive_t *drive, u8 command) { /* issue cmd to drive */ ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, dma_timer_expiry); } +EXPORT_SYMBOL_GPL(ide_dma_exec_cmd); void ide_dma_start(ide_drive_t *drive) { @@ -532,7 +533,7 @@ int __ide_dma_end (ide_drive_t *drive) EXPORT_SYMBOL(__ide_dma_end); /* returns 1 if dma irq issued, 0 otherwise */ -static int __ide_dma_test_irq(ide_drive_t *drive) +int ide_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 dma_stat = hwif->INB(hwif->dma_status); @@ -542,9 +543,10 @@ static int __ide_dma_test_irq(ide_drive_t *drive) return 1; if (!drive->waiting_for_dma) printk(KERN_WARNING "%s: (%s) called while not waiting\n", - drive->name, __FUNCTION__); + drive->name, __func__); return 0; } +EXPORT_SYMBOL_GPL(ide_dma_test_irq); #else static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; } #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ @@ -574,6 +576,7 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) { struct hd_driveid *id = drive->id; ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; unsigned int mask = 0; switch(base) { @@ -581,8 +584,8 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) if ((id->field_valid & 4) == 0) break; - if (hwif->udma_filter) - mask = hwif->udma_filter(drive); + if (port_ops && port_ops->udma_filter) + mask = port_ops->udma_filter(drive); else mask = hwif->ultra_mask; mask &= id->dma_ultra; @@ -598,8 +601,8 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) case XFER_MW_DMA_0: if ((id->field_valid & 2) == 0) break; - if (hwif->mdma_filter) - mask = hwif->mdma_filter(drive); + if (port_ops && port_ops->mdma_filter) + mask = port_ops->mdma_filter(drive); else mask = hwif->mwdma_mask; mask &= id->dma_mword; @@ -801,15 +804,15 @@ void ide_dma_timeout (ide_drive_t *drive) printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name); - if (hwif->ide_dma_test_irq(drive)) + if (hwif->dma_ops->dma_test_irq(drive)) return; - hwif->ide_dma_end(drive); + hwif->dma_ops->dma_end(drive); } EXPORT_SYMBOL(ide_dma_timeout); -static void ide_release_dma_engine(ide_hwif_t *hwif) +void ide_release_dma_engine(ide_hwif_t *hwif) { if (hwif->dmatable_cpu) { struct pci_dev *pdev = to_pci_dev(hwif->dev); @@ -820,28 +823,7 @@ static void ide_release_dma_engine(ide_hwif_t *hwif) } } -static int ide_release_iomio_dma(ide_hwif_t *hwif) -{ - release_region(hwif->dma_base, 8); - if (hwif->extra_ports) - release_region(hwif->extra_base, hwif->extra_ports); - return 1; -} - -/* - * Needed for allowing full modular support of ide-driver - */ -int ide_release_dma(ide_hwif_t *hwif) -{ - ide_release_dma_engine(hwif); - - if (hwif->mmio) - return 1; - else - return ide_release_iomio_dma(hwif); -} - -static int ide_allocate_dma_engine(ide_hwif_t *hwif) +int ide_allocate_dma_engine(ide_hwif_t *hwif) { struct pci_dev *pdev = to_pci_dev(hwif->dev); @@ -853,65 +835,25 @@ static int ide_allocate_dma_engine(ide_hwif_t *hwif) return 0; printk(KERN_ERR "%s: -- Error, unable to allocate DMA table.\n", - hwif->cds->name); + hwif->name); return 1; } - -static int ide_mapped_mmio_dma(ide_hwif_t *hwif, unsigned long base) -{ - printk(KERN_INFO " %s: MMIO-DMA ", hwif->name); - - return 0; -} - -static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base) -{ - printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx", - hwif->name, base, base + 7); - - if (!request_region(base, 8, hwif->name)) { - printk(" -- Error, ports in use.\n"); - return 1; - } - - if (hwif->cds->extra) { - hwif->extra_base = base + (hwif->channel ? 8 : 16); - - if (!hwif->mate || !hwif->mate->extra_ports) { - if (!request_region(hwif->extra_base, - hwif->cds->extra, hwif->cds->name)) { - printk(" -- Error, extra ports in use.\n"); - release_region(base, 8); - return 1; - } - hwif->extra_ports = hwif->cds->extra; - } - } - - return 0; -} - -static int ide_dma_iobase(ide_hwif_t *hwif, unsigned long base) -{ - if (hwif->mmio) - return ide_mapped_mmio_dma(hwif, base); - - return ide_iomio_dma(hwif, base); -} +EXPORT_SYMBOL_GPL(ide_allocate_dma_engine); + +static const struct ide_dma_ops sff_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_timeout = ide_dma_timeout, + .dma_lost_irq = ide_dma_lost_irq, +}; void ide_setup_dma(ide_hwif_t *hwif, unsigned long base) { - u8 dma_stat; - - if (ide_dma_iobase(hwif, base)) - return; - - if (ide_allocate_dma_engine(hwif)) { - ide_release_dma(hwif); - return; - } - hwif->dma_base = base; if (!hwif->dma_command) @@ -925,27 +867,7 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base) if (!hwif->dma_prdtable) hwif->dma_prdtable = hwif->dma_base + 4; - if (!hwif->dma_host_set) - hwif->dma_host_set = &ide_dma_host_set; - if (!hwif->dma_setup) - hwif->dma_setup = &ide_dma_setup; - if (!hwif->dma_exec_cmd) - hwif->dma_exec_cmd = &ide_dma_exec_cmd; - if (!hwif->dma_start) - hwif->dma_start = &ide_dma_start; - if (!hwif->ide_dma_end) - hwif->ide_dma_end = &__ide_dma_end; - if (!hwif->ide_dma_test_irq) - hwif->ide_dma_test_irq = &__ide_dma_test_irq; - if (!hwif->dma_timeout) - hwif->dma_timeout = &ide_dma_timeout; - if (!hwif->dma_lost_irq) - hwif->dma_lost_irq = &ide_dma_lost_irq; - - dma_stat = hwif->INB(hwif->dma_status); - printk(KERN_CONT ", BIOS settings: %s:%s, %s:%s\n", - hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "PIO", - hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "PIO"); + hwif->dma_ops = &sff_dma_ops; } EXPORT_SYMBOL_GPL(ide_setup_dma); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index ed19a8bbd2d2..6e891bccd052 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -411,7 +411,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) debug_log("Reached %s interrupt handler\n", __func__); if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - dma_error = hwif->ide_dma_end(drive); + dma_error = hwif->dma_ops->dma_end(drive); if (dma_error) { printk(KERN_ERR "%s: DMA %s error\n", drive->name, rq_data_dir(rq) ? "write" : "read"); @@ -663,7 +663,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, dma = 0; if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) - dma = !hwif->dma_setup(drive); + dma = !hwif->dma_ops->dma_setup(drive); ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | IDE_TFLAG_OUT_DEVICE, bcount, dma); @@ -671,7 +671,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, if (dma) { /* Begin DMA, if necessary */ pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_start(drive); + hwif->dma_ops->dma_start(drive); } /* Can we transfer the packet when we get the interrupt or wait? */ diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 19f63e393d18..a6073e248f45 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -94,7 +94,24 @@ static int __init ide_generic_init(void) unsigned long io_addr = ide_default_io_base(i); hw_regs_t hw; + idx[i] = 0xff; + if (io_addr) { + if (!request_region(io_addr, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX " + "not free.\n", + DRV_NAME, io_addr, io_addr + 7); + continue; + } + + if (!request_region(io_addr + 0x206, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX " + "not free.\n", + DRV_NAME, io_addr + 0x206); + release_region(io_addr, 8); + continue; + } + /* * Skip probing if the corresponding * slot is already occupied. @@ -111,8 +128,7 @@ static int __init ide_generic_init(void) ide_init_port_hw(hwif, &hw); idx[i] = i; - } else - idx[i] = 0xff; + } } ide_device_add_all(idx, NULL); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 51d181ee9cf7..0fe89a599275 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -218,7 +218,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * * we could be smarter and check for current xfer_speed * in struct drive etc... */ - if (drive->hwif->dma_host_set == NULL) + if (drive->hwif->dma_ops == NULL) break; /* * TODO: respect ->using_dma setting @@ -721,6 +721,7 @@ static ide_startstop_t do_special (ide_drive_t *drive) #endif if (s->b.set_tune) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; u8 req_pio = drive->tune_req; s->b.set_tune = 0; @@ -733,10 +734,10 @@ static ide_startstop_t do_special (ide_drive_t *drive) unsigned long flags; spin_lock_irqsave(&ide_lock, flags); - hwif->set_pio_mode(drive, req_pio); + port_ops->set_pio_mode(drive, req_pio); spin_unlock_irqrestore(&ide_lock, flags); } else - hwif->set_pio_mode(drive, req_pio); + port_ops->set_pio_mode(drive, req_pio); } else { int keep_dma = drive->using_dma; @@ -1237,12 +1238,12 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) if (error < 0) { printk(KERN_WARNING "%s: DMA timeout error\n", drive->name); - (void)HWIF(drive)->ide_dma_end(drive); + (void)hwif->dma_ops->dma_end(drive); ret = ide_error(drive, "dma timeout error", ide_read_status(drive)); } else { printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name); - hwif->dma_timeout(drive); + hwif->dma_ops->dma_timeout(drive); } /* @@ -1354,7 +1355,7 @@ void ide_timer_expiry (unsigned long data) startstop = handler(drive); } else if (drive_is_ready(drive)) { if (drive->waiting_for_dma) - hwgroup->hwif->dma_lost_irq(drive); + hwif->dma_ops->dma_lost_irq(drive); (void)ide_ack_intr(hwif); printk(KERN_WARNING "%s: lost interrupt\n", drive->name); startstop = handler(drive); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 45944219eea0..9c646bd63549 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -159,17 +159,20 @@ EXPORT_SYMBOL(default_hwif_mmiops); void SELECT_DRIVE (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; - if (hwif->selectproc) - hwif->selectproc(drive); + if (port_ops && port_ops->selectproc) + port_ops->selectproc(drive); hwif->OUTB(drive->select.all, hwif->io_ports[IDE_SELECT_OFFSET]); } void SELECT_MASK (ide_drive_t *drive, int mask) { - if (HWIF(drive)->maskproc) - HWIF(drive)->maskproc(drive, mask); + const struct ide_port_ops *port_ops = drive->hwif->port_ops; + + if (port_ops && port_ops->maskproc) + port_ops->maskproc(drive, mask); } /* @@ -429,7 +432,7 @@ int drive_is_ready (ide_drive_t *drive) u8 stat = 0; if (drive->waiting_for_dma) - return hwif->ide_dma_test_irq(drive); + return hwif->dma_ops->dma_test_irq(drive); #if 0 /* need to guarantee 400ns since last command was issued */ @@ -700,8 +703,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) // msleep(50); #ifdef CONFIG_BLK_DEV_IDEDMA - if (hwif->dma_host_set) /* check if host supports DMA */ - hwif->dma_host_set(drive, 0); + if (hwif->dma_ops) /* check if host supports DMA */ + hwif->dma_ops->dma_host_set(drive, 0); #endif /* Skip setting PIO flow-control modes on pre-EIDE drives */ @@ -759,8 +762,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) #ifdef CONFIG_BLK_DEV_IDEDMA if ((speed >= XFER_SW_DMA_0 || (hwif->host_flags & IDE_HFLAG_VDMA)) && drive->using_dma) - hwif->dma_host_set(drive, 1); - else if (hwif->dma_host_set) /* check if host supports DMA */ + hwif->dma_ops->dma_host_set(drive, 1); + else if (hwif->dma_ops) /* check if host supports DMA */ ide_dma_off_quietly(drive); #endif @@ -905,10 +908,11 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) { ide_hwgroup_t *hwgroup = HWGROUP(drive); ide_hwif_t *hwif = HWIF(drive); + const struct ide_port_ops *port_ops = hwif->port_ops; u8 tmp; - if (hwif->reset_poll != NULL) { - if (hwif->reset_poll(drive)) { + if (port_ops && port_ops->reset_poll) { + if (port_ops->reset_poll(drive)) { printk(KERN_ERR "%s: host reset_poll failure for %s.\n", hwif->name, drive->name); return ide_stopped; @@ -974,6 +978,8 @@ static void ide_disk_pre_reset(ide_drive_t *drive) static void pre_reset(ide_drive_t *drive) { + const struct ide_port_ops *port_ops = drive->hwif->port_ops; + if (drive->media == ide_disk) ide_disk_pre_reset(drive); else @@ -994,8 +1000,8 @@ static void pre_reset(ide_drive_t *drive) return; } - if (HWIF(drive)->pre_reset != NULL) - HWIF(drive)->pre_reset(drive); + if (port_ops && port_ops->pre_reset) + port_ops->pre_reset(drive); if (drive->current_speed != 0xff) drive->desired_speed = drive->current_speed; @@ -1023,6 +1029,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) unsigned long flags; ide_hwif_t *hwif; ide_hwgroup_t *hwgroup; + const struct ide_port_ops *port_ops; u8 ctl; spin_lock_irqsave(&ide_lock, flags); @@ -1089,8 +1096,9 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) * state when the disks are reset this way. At least, the Winbond * 553 documentation says that */ - if (hwif->resetproc) - hwif->resetproc(drive); + port_ops = hwif->port_ops; + if (port_ops && port_ops->resetproc) + port_ops->resetproc(drive); spin_unlock_irqrestore(&ide_lock, flags); return ide_started; diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index c859de77aa8f..6f04ea3e93a8 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -85,7 +85,7 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) mode = XFER_PIO_4; } -// printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed); +/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */ return min(speed, mode); } @@ -288,9 +288,10 @@ EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); void ide_set_pio(ide_drive_t *drive, u8 req_pio) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; u8 host_pio, pio; - if (hwif->set_pio_mode == NULL || + if (port_ops == NULL || port_ops->set_pio_mode == NULL || (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) return; @@ -343,29 +344,30 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) return 0; - if (hwif->set_pio_mode == NULL) + if (port_ops == NULL || port_ops->set_pio_mode == NULL) return -1; /* * TODO: temporary hack for some legacy host drivers that didn't * set transfer mode on the device in ->set_pio_mode method... */ - if (hwif->set_dma_mode == NULL) { - hwif->set_pio_mode(drive, mode - XFER_PIO_0); + if (port_ops->set_dma_mode == NULL) { + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); return 0; } if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { if (ide_config_drive_speed(drive, mode)) return -1; - hwif->set_pio_mode(drive, mode - XFER_PIO_0); + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); return 0; } else { - hwif->set_pio_mode(drive, mode - XFER_PIO_0); + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); return ide_config_drive_speed(drive, mode); } } @@ -373,20 +375,21 @@ int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) return 0; - if (hwif->set_dma_mode == NULL) + if (port_ops == NULL || port_ops->set_dma_mode == NULL) return -1; if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { if (ide_config_drive_speed(drive, mode)) return -1; - hwif->set_dma_mode(drive, mode); + port_ops->set_dma_mode(drive, mode); return 0; } else { - hwif->set_dma_mode(drive, mode); + port_ops->set_dma_mode(drive, mode); return ide_config_drive_speed(drive, mode); } } @@ -406,8 +409,9 @@ EXPORT_SYMBOL_GPL(ide_set_dma_mode); int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; - if (hwif->set_dma_mode == NULL || + if (port_ops == NULL || port_ops->set_dma_mode == NULL || (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) return -1; diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 8a178a55a027..10c20e9a5785 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -18,6 +18,8 @@ #include <linux/pnp.h> #include <linux/ide.h> +#define DRV_NAME "ide-pnp" + /* Add your devices here :)) */ static struct pnp_device_id idepnp_devices[] = { /* Generic ESDI/IDE/ATA compatible hard disk controller */ @@ -29,13 +31,29 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) { hw_regs_t hw; ide_hwif_t *hwif; + unsigned long base, ctl; if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0))) return -1; + base = pnp_port_start(dev, 0); + ctl = pnp_port_start(dev, 1); + + if (!request_region(base, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + DRV_NAME, base, base + 7); + return -EBUSY; + } + + if (!request_region(ctl, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + DRV_NAME, ctl); + release_region(base, 8); + return -EBUSY; + } + memset(&hw, 0, sizeof(hw)); - ide_std_init_ports(&hw, pnp_port_start(dev, 0), - pnp_port_start(dev, 1)); + ide_std_init_ports(&hw, base, ctl); hw.irq = pnp_irq(dev, 0); hwif = ide_find_port(); @@ -54,6 +72,9 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) return 0; } + release_region(ctl, 1); + release_region(base, 8); + return -1; } @@ -65,6 +86,9 @@ static void idepnp_remove(struct pnp_dev *dev) ide_unregister(hwif->index); else printk(KERN_ERR "idepnp: Unable to remove device, please report.\n"); + + release_region(pnp_port_start(dev, 1), 1); + release_region(pnp_port_start(dev, 0), 8); } static struct pnp_driver idepnp_driver = { diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 875429728021..a4b65b321f51 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -644,7 +644,7 @@ static int ide_register_port(ide_hwif_t *hwif) ret = device_register(&hwif->gendev); if (ret < 0) { printk(KERN_WARNING "IDE: %s: device_register error: %d\n", - __FUNCTION__, ret); + __func__, ret); goto out; } @@ -773,8 +773,7 @@ static int ide_probe_port(ide_hwif_t *hwif) BUG_ON(hwif->present); - if (hwif->noprobe || - (hwif->drives[0].noprobe && hwif->drives[1].noprobe)) + if (hwif->drives[0].noprobe && hwif->drives[1].noprobe) return -EACCES; /* @@ -821,13 +820,14 @@ static int ide_probe_port(ide_hwif_t *hwif) static void ide_port_tune_devices(ide_hwif_t *hwif) { + const struct ide_port_ops *port_ops = hwif->port_ops; int unit; for (unit = 0; unit < MAX_DRIVES; unit++) { ide_drive_t *drive = &hwif->drives[unit]; - if (drive->present && hwif->quirkproc) - hwif->quirkproc(drive); + if (drive->present && port_ops && port_ops->quirkproc) + port_ops->quirkproc(drive); } for (unit = 0; unit < MAX_DRIVES; ++unit) { @@ -843,7 +843,7 @@ static void ide_port_tune_devices(ide_hwif_t *hwif) drive->nice1 = 1; - if (hwif->dma_host_set) + if (hwif->dma_ops) ide_set_dma(drive); } } @@ -1324,6 +1324,7 @@ static void hwif_register_devices(ide_hwif_t *hwif) static void ide_port_init_devices(ide_hwif_t *hwif) { + const struct ide_port_ops *port_ops = hwif->port_ops; int i; for (i = 0; i < MAX_DRIVES; i++) { @@ -1339,8 +1340,8 @@ static void ide_port_init_devices(ide_hwif_t *hwif) drive->autotune = 1; } - if (hwif->port_init_devs) - hwif->port_init_devs(hwif); + if (port_ops && port_ops->port_init_devs) + port_ops->port_init_devs(hwif); } static void ide_init_port(ide_hwif_t *hwif, unsigned int port, @@ -1355,9 +1356,6 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, if (d->init_iops) d->init_iops(hwif); - if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) - ide_hwif_setup_dma(hwif, d); - if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) hwif->irq = port ? 15 : 14; @@ -1365,16 +1363,36 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, hwif->host_flags = d->host_flags; hwif->pio_mask = d->pio_mask; - if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate) - hwif->mate->serialized = hwif->serialized = 1; + /* ->set_pio_mode for DTC2278 is currently limited to port 0 */ + if (hwif->chipset != ide_dtc2278 || hwif->channel == 0) + hwif->port_ops = d->port_ops; + + if ((d->host_flags & IDE_HFLAG_SERIALIZE) || + ((d->host_flags & IDE_HFLAG_SERIALIZE_DMA) && hwif->dma_base)) { + if (hwif->mate) + hwif->mate->serialized = hwif->serialized = 1; + } hwif->swdma_mask = d->swdma_mask; hwif->mwdma_mask = d->mwdma_mask; hwif->ultra_mask = d->udma_mask; - /* reset DMA masks only for SFF-style DMA controllers */ - if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0) - hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0; + if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) { + int rc; + + if (d->init_dma) + rc = d->init_dma(hwif, d); + else + rc = ide_hwif_setup_dma(hwif, d); + + if (rc < 0) { + printk(KERN_INFO "%s: DMA disabled\n", hwif->name); + hwif->swdma_mask = 0; + hwif->mwdma_mask = 0; + hwif->ultra_mask = 0; + } else if (d->dma_ops) + hwif->dma_ops = d->dma_ops; + } if (d->host_flags & IDE_HFLAG_RQSIZE_256) hwif->rqsize = 256; @@ -1386,9 +1404,11 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, static void ide_port_cable_detect(ide_hwif_t *hwif) { - if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) { + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (port_ops && port_ops->cable_detect && (hwif->ultra_mask & 0x78)) { if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = hwif->cable_detect(hwif); + hwif->cbl = port_ops->cable_detect(hwif); } } @@ -1523,25 +1543,15 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) hwif = &ide_hwifs[idx[i]]; - if ((hwif->chipset != ide_4drives || !hwif->mate || - !hwif->mate->present) && ide_hwif_request_regions(hwif)) { - printk(KERN_ERR "%s: ports already in use, " - "skipping probe\n", hwif->name); - continue; - } - - if (ide_probe_port(hwif) < 0) { - ide_hwif_release_regions(hwif); - continue; - } - - hwif->present = 1; + if (ide_probe_port(hwif) == 0) + hwif->present = 1; if (hwif->chipset != ide_4drives || !hwif->mate || !hwif->mate->present) ide_register_port(hwif); - ide_port_tune_devices(hwif); + if (hwif->present) + ide_port_tune_devices(hwif); } for (i = 0; i < MAX_HWIFS; i++) { @@ -1550,9 +1560,6 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) hwif = &ide_hwifs[idx[i]]; - if (!hwif->present) - continue; - if (hwif_init(hwif) == 0) { printk(KERN_INFO "%s: failed to initialize IDE " "interface\n", hwif->name); @@ -1561,10 +1568,13 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) continue; } - ide_port_setup_devices(hwif); + if (hwif->present) + ide_port_setup_devices(hwif); ide_acpi_init(hwif); - ide_acpi_port_init_devices(hwif); + + if (hwif->present) + ide_acpi_port_init_devices(hwif); } for (i = 0; i < MAX_HWIFS; i++) { @@ -1573,11 +1583,11 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) hwif = &ide_hwifs[idx[i]]; - if (hwif->present) { - if (hwif->chipset == ide_unknown) - hwif->chipset = ide_generic; + if (hwif->chipset == ide_unknown) + hwif->chipset = ide_generic; + + if (hwif->present) hwif_register_devices(hwif); - } } for (i = 0; i < MAX_HWIFS; i++) { @@ -1586,11 +1596,11 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) hwif = &ide_hwifs[idx[i]]; - if (hwif->present) { - ide_sysfs_register_port(hwif); - ide_proc_register_port(hwif); + ide_sysfs_register_port(hwif); + ide_proc_register_port(hwif); + + if (hwif->present) ide_proc_port_register_devices(hwif); - } } return rc; @@ -1626,3 +1636,67 @@ void ide_port_scan(ide_hwif_t *hwif) ide_proc_port_register_devices(hwif); } EXPORT_SYMBOL_GPL(ide_port_scan); + +static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no, + const struct ide_port_info *d, + unsigned long config) +{ + ide_hwif_t *hwif; + unsigned long base, ctl; + int irq; + + if (port_no == 0) { + base = 0x1f0; + ctl = 0x3f6; + irq = 14; + } else { + base = 0x170; + ctl = 0x376; + irq = 15; + } + + if (!request_region(base, 8, d->name)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + d->name, base, base + 7); + return; + } + + if (!request_region(ctl, 1, d->name)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + d->name, ctl); + release_region(base, 8); + return; + } + + ide_std_init_ports(hw, base, ctl); + hw->irq = irq; + + hwif = ide_find_port_slot(d); + if (hwif) { + ide_init_port_hw(hwif, hw); + if (config) + hwif->config_data = config; + idx[port_no] = hwif->index; + } +} + +int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config) +{ + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw[2]; + + memset(&hw, 0, sizeof(hw)); + + if ((d->host_flags & IDE_HFLAG_QD_2ND_PORT) == 0) + ide_legacy_init_one(idx, &hw[0], 0, d, config); + ide_legacy_init_one(idx, &hw[1], 1, d, config); + + if (idx[0] == 0xff && idx[1] == 0xff && + (d->host_flags & IDE_HFLAG_SINGLE)) + return -ENOENT; + + ide_device_add(idx, d); + + return 0; +} +EXPORT_SYMBOL_GPL(ide_legacy_device_add); diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 5d3562b45039..d9d98ac85b29 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -599,14 +599,14 @@ static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) err = device_attach(dev); if (err < 0) printk(KERN_WARNING "IDE: %s: device_attach error: %d\n", - __FUNCTION__, err); + __func__, err); drive->driver_req[0] = 0; if (dev->driver == NULL) { err = device_attach(dev); if (err < 0) printk(KERN_WARNING "IDE: %s: device_attach(2) error: %d\n", - __FUNCTION__, err); + __func__, err); } if (dev->driver && !strcmp(dev->driver->name, driver)) ret = 0; @@ -820,7 +820,7 @@ static int ide_drivers_show(struct seq_file *s, void *p) err = bus_for_each_drv(&ide_bus_type, NULL, s, proc_print_driver); if (err < 0) printk(KERN_WARNING "IDE: %s: bus_for_each_drv error: %d\n", - __FUNCTION__, err); + __func__, err); return 0; } diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c index 98888da1b600..0e79efff1deb 100644 --- a/drivers/ide/ide-scan-pci.c +++ b/drivers/ide/ide-scan-pci.c @@ -102,7 +102,7 @@ static int __init ide_scan_pcibus(void) if (__pci_register_driver(d, d->driver.owner, d->driver.mod_name)) printk(KERN_ERR "%s: failed to register %s driver\n", - __FUNCTION__, d->driver.mod_name); + __func__, d->driver.mod_name); } return 0; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index f43fd070f1b6..d3d8b8d5157c 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -993,7 +993,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) stat = ide_read_status(drive); if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) { + if (hwif->dma_ops->dma_end(drive) || (stat & ERR_STAT)) { /* * A DMA error is sometimes expected. For example, * if the tape is crossing a filemark during a @@ -1213,7 +1213,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) #ifdef CONFIG_BLK_DEV_IDEDMA /* Begin DMA, if necessary */ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) - hwif->dma_start(drive); + hwif->dma_ops->dma_start(drive); #endif /* Send the actual packet */ HWIF(drive)->atapi_output_bytes(drive, pc->c, 12); @@ -1279,7 +1279,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, ide_dma_off(drive); } if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) - dma_ok = !hwif->dma_setup(drive); + dma_ok = !hwif->dma_ops->dma_setup(drive); ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); @@ -1605,14 +1605,6 @@ out: } /* Pipeline related functions */ -static inline int idetape_pipeline_active(idetape_tape_t *tape) -{ - int rc1, rc2; - - rc1 = test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags); - rc2 = (tape->active_data_rq != NULL); - return rc1; -} /* * The function below uses __get_free_page to allocate a pipeline stage, along @@ -2058,7 +2050,7 @@ static int __idetape_discard_read_pipeline(ide_drive_t *drive) spin_lock_irqsave(&tape->lock, flags); tape->next_stage = NULL; - if (idetape_pipeline_active(tape)) + if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) idetape_wait_for_request(drive, tape->active_data_rq); spin_unlock_irqrestore(&tape->lock, flags); @@ -2131,7 +2123,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); - if (idetape_pipeline_active(tape)) { + if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) { printk(KERN_ERR "ide-tape: bug: the pipeline is active in %s\n", __func__); return (0); @@ -2162,8 +2154,7 @@ static void idetape_plug_pipeline(ide_drive_t *drive) if (tape->next_stage == NULL) return; - if (!idetape_pipeline_active(tape)) { - set_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags); + if (!test_and_set_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) { idetape_activate_next_stage(drive); (void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end); } @@ -2242,13 +2233,14 @@ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) /* Attempt to allocate a new stage. Beware possible race conditions. */ while ((new_stage = idetape_kmalloc_stage(tape)) == NULL) { spin_lock_irqsave(&tape->lock, flags); - if (idetape_pipeline_active(tape)) { + if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) { idetape_wait_for_request(drive, tape->active_data_rq); spin_unlock_irqrestore(&tape->lock, flags); } else { spin_unlock_irqrestore(&tape->lock, flags); idetape_plug_pipeline(drive); - if (idetape_pipeline_active(tape)) + if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, + &tape->flags)) continue; /* * The machine is short on memory. Fallback to non- @@ -2277,7 +2269,7 @@ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) * starting to service requests, so that we will be able to keep up with * the higher speeds of the tape. */ - if (!idetape_pipeline_active(tape)) { + if (!test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) { if (tape->nr_stages >= tape->max_stages * 9 / 10 || tape->nr_stages >= tape->max_stages - tape->uncontrolled_pipeline_head_speed * 3 * 1024 / @@ -2304,10 +2296,11 @@ static void idetape_wait_for_pipeline(ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; unsigned long flags; - while (tape->next_stage || idetape_pipeline_active(tape)) { + while (tape->next_stage || test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, + &tape->flags)) { idetape_plug_pipeline(drive); spin_lock_irqsave(&tape->lock, flags); - if (idetape_pipeline_active(tape)) + if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) idetape_wait_for_request(drive, tape->active_data_rq); spin_unlock_irqrestore(&tape->lock, flags); } @@ -2464,7 +2457,7 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages) new_stage = idetape_kmalloc_stage(tape); } } - if (!idetape_pipeline_active(tape)) { + if (!test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) { if (tape->nr_pending_stages >= 3 * max_stages / 4) { tape->measure_insert_time = 1; tape->insert_time = jiffies; diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 155cc904f4eb..a317ca9c46e5 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -135,6 +135,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) ide_hwif_t *hwif = HWIF(drive); struct ide_taskfile *tf = &task->tf; ide_handler_t *handler = NULL; + const struct ide_dma_ops *dma_ops = hwif->dma_ops; if (task->data_phase == TASKFILE_MULTI_IN || task->data_phase == TASKFILE_MULTI_OUT) { @@ -178,10 +179,10 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) return ide_started; default: if (task_dma_ok(task) == 0 || drive->using_dma == 0 || - hwif->dma_setup(drive)) + dma_ops->dma_setup(drive)) return ide_stopped; - hwif->dma_exec_cmd(drive, tf->command); - hwif->dma_start(drive); + dma_ops->dma_exec_cmd(drive, tf->command); + dma_ops->dma_start(drive); return ide_started; } } @@ -455,7 +456,7 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive) /* Error? */ if (stat & ERR_STAT) - return task_error(drive, rq, __FUNCTION__, stat); + return task_error(drive, rq, __func__, stat); /* Didn't want any data? Odd. */ if (!(stat & DRQ_STAT)) @@ -467,7 +468,7 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive) if (!hwif->nleft) { stat = wait_drive_not_busy(drive); if (!OK_STAT(stat, 0, BAD_STAT)) - return task_error(drive, rq, __FUNCTION__, stat); + return task_error(drive, rq, __func__, stat); task_end_request(drive, rq, stat); return ide_stopped; } @@ -488,11 +489,11 @@ static ide_startstop_t task_out_intr (ide_drive_t *drive) u8 stat = ide_read_status(drive); if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) - return task_error(drive, rq, __FUNCTION__, stat); + return task_error(drive, rq, __func__, stat); /* Deal with unexpected ATA data phase. */ if (((stat & DRQ_STAT) == 0) ^ !hwif->nleft) - return task_error(drive, rq, __FUNCTION__, stat); + return task_error(drive, rq, __func__, stat); if (!hwif->nleft) { task_end_request(drive, rq, stat); @@ -675,7 +676,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) /* (hs): give up if multcount is not set */ printk(KERN_ERR "%s: %s Multimode Write " \ "multcount is not set\n", - drive->name, __FUNCTION__); + drive->name, __func__); err = -EPERM; goto abort; } @@ -692,7 +693,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) /* (hs): give up if multcount is not set */ printk(KERN_ERR "%s: %s Multimode Read failure " \ "multcount is not set\n", - drive->name, __FUNCTION__); + drive->name, __func__); err = -EPERM; goto abort; } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index d868ca44d033..bced02f9f2c3 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -227,79 +227,6 @@ static int ide_system_bus_speed(void) return pci_dev_present(pci_default) ? 33 : 50; } -static struct resource* hwif_request_region(ide_hwif_t *hwif, - unsigned long addr, int num) -{ - struct resource *res = request_region(addr, num, hwif->name); - - if (!res) - printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", - hwif->name, addr, addr+num-1); - return res; -} - -/** - * ide_hwif_request_regions - request resources for IDE - * @hwif: interface to use - * - * Requests all the needed resources for an interface. - * Right now core IDE code does this work which is deeply wrong. - * MMIO leaves it to the controller driver, - * PIO will migrate this way over time. - */ - -int ide_hwif_request_regions(ide_hwif_t *hwif) -{ - unsigned long addr; - - if (hwif->mmio) - return 0; - - addr = hwif->io_ports[IDE_CONTROL_OFFSET]; - - if (addr && !hwif_request_region(hwif, addr, 1)) - goto control_region_busy; - - addr = hwif->io_ports[IDE_DATA_OFFSET]; - BUG_ON((addr | 7) != hwif->io_ports[IDE_STATUS_OFFSET]); - - if (!hwif_request_region(hwif, addr, 8)) - goto data_region_busy; - - return 0; - -data_region_busy: - addr = hwif->io_ports[IDE_CONTROL_OFFSET]; - if (addr) - release_region(addr, 1); -control_region_busy: - /* If any errors are return, we drop the hwif interface. */ - return -EBUSY; -} - -/** - * ide_hwif_release_regions - free IDE resources - * - * Note that we only release the standard ports, - * and do not even try to handle any extra ports - * allocated for weird IDE interface chipsets. - * - * Note also that we don't yet handle mmio resources here. More - * importantly our caller should be doing this so we need to - * restructure this as a helper function for drivers. - */ - -void ide_hwif_release_regions(ide_hwif_t *hwif) -{ - if (hwif->mmio) - return; - - if (hwif->io_ports[IDE_CONTROL_OFFSET]) - release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1); - - release_region(hwif->io_ports[IDE_DATA_OFFSET], 8); -} - void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) { ide_hwgroup_t *hwgroup = hwif->hwgroup; @@ -436,9 +363,7 @@ void ide_unregister(unsigned int index) spin_lock_irq(&ide_lock); if (hwif->dma_base) - (void)ide_release_dma(hwif); - - ide_hwif_release_regions(hwif); + ide_release_dma_engine(hwif); /* restore hwif data to pristine status */ ide_init_port_data(hwif, index); @@ -454,7 +379,6 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) { memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); hwif->irq = hw->irq; - hwif->noprobe = 0; hwif->chipset = hw->chipset; hwif->gendev.parent = hw->dev; hwif->ack_intr = hw->ack_intr; @@ -545,7 +469,7 @@ int set_using_dma(ide_drive_t *drive, int arg) if (!drive->id || !(drive->id->capability & 1)) goto out; - if (hwif->dma_host_set == NULL) + if (hwif->dma_ops == NULL) goto out; err = -EBUSY; @@ -585,11 +509,12 @@ int set_pio_mode(ide_drive_t *drive, int arg) { struct request rq; ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; if (arg < 0 || arg > 255) return -EINVAL; - if (hwif->set_pio_mode == NULL || + if (port_ops == NULL || port_ops->set_pio_mode == NULL || (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) return -ENOSYS; @@ -1005,14 +930,12 @@ static int __init ide_setup(char *s) goto done; case -3: /* "nowerr" */ drive->bad_wstat = BAD_R_STAT; - hwif->noprobe = 0; goto done; case -4: /* "cdrom" */ drive->present = 1; drive->media = ide_cdrom; /* an ATAPI device ignores DRDY */ drive->ready_stat = 0; - hwif->noprobe = 0; goto done; case -5: /* nodma */ drive->nodma = 1; @@ -1043,7 +966,6 @@ static int __init ide_setup(char *s) drive->sect = drive->bios_sect = vals[2]; drive->present = 1; drive->forced_geom = 1; - hwif->noprobe = 0; goto done; default: goto bad_option; diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 33bb7b87be5d..6efbf947c6db 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -49,6 +49,8 @@ #include <asm/io.h> +#define DRV_NAME "ali14xx" + /* port addresses for auto-detection */ #define ALI_NUM_PORTS 4 static const int ports[ALI_NUM_PORTS] __initdata = @@ -192,18 +194,20 @@ static int __init initRegisters(void) return t; } +static const struct ide_port_ops ali14xx_port_ops = { + .set_pio_mode = ali14xx_set_pio_mode, +}; + static const struct ide_port_info ali14xx_port_info = { + .name = DRV_NAME, .chipset = ide_ali14xx, + .port_ops = &ali14xx_port_ops, .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE, .pio_mask = ATA_PIO4, }; static int __init ali14xx_probe(void) { - ide_hwif_t *hwif, *mate; - static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - hw_regs_t hw[2]; - printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n", basePort, regOn); @@ -213,31 +217,7 @@ static int __init ali14xx_probe(void) return 1; } - memset(&hw, 0, sizeof(hw)); - - ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); - hw[0].irq = 14; - - ide_std_init_ports(&hw[1], 0x170, 0x376); - hw[1].irq = 15; - - hwif = ide_find_port(); - if (hwif) { - ide_init_port_hw(hwif, &hw[0]); - hwif->set_pio_mode = &ali14xx_set_pio_mode; - idx[0] = hwif->index; - } - - mate = ide_find_port(); - if (mate) { - ide_init_port_hw(mate, &hw[1]); - mate->set_pio_mode = &ali14xx_set_pio_mode; - idx[1] = mate->index; - } - - ide_device_add(idx, &ali14xx_port_info); - - return 0; + return ide_legacy_device_add(&ali14xx_port_info, 0); } int probe_ali14xx; diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 6956eb8f2d5f..f51433bce8e4 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -228,8 +228,6 @@ fail_base2: ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; - idx[i] = index; } } diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c index 9c6b3249a004..f7c4ad1c57c0 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c @@ -16,6 +16,8 @@ #include <asm/io.h> +#define DRV_NAME "dtc2278" + /* * Changing this #undef to #define may solve start up problems in some systems. */ @@ -86,8 +88,14 @@ static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio) } } +static const struct ide_port_ops dtc2278_port_ops = { + .set_pio_mode = dtc2278_set_pio_mode, +}; + static const struct ide_port_info dtc2278_port_info __initdata = { + .name = DRV_NAME, .chipset = ide_dtc2278, + .port_ops = &dtc2278_port_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_UNMASK_IRQS | IDE_HFLAG_IO_32BIT | @@ -101,9 +109,6 @@ static const struct ide_port_info dtc2278_port_info __initdata = { static int __init dtc2278_probe(void) { unsigned long flags; - ide_hwif_t *hwif, *mate; - static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - hw_regs_t hw[2]; local_irq_save(flags); /* @@ -123,30 +128,7 @@ static int __init dtc2278_probe(void) #endif local_irq_restore(flags); - memset(&hw, 0, sizeof(hw)); - - ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); - hw[0].irq = 14; - - ide_std_init_ports(&hw[1], 0x170, 0x376); - hw[1].irq = 15; - - hwif = ide_find_port(); - if (hwif) { - ide_init_port_hw(hwif, &hw[0]); - hwif->set_pio_mode = dtc2278_set_pio_mode; - idx[0] = hwif->index; - } - - mate = ide_find_port(); - if (mate) { - ide_init_port_hw(mate, &hw[1]); - idx[1] = mate->index; - } - - ide_device_add(idx, &dtc2278_port_info); - - return 0; + return ide_legacy_device_add(&dtc2278_port_info, 0); } int probe_dtc2278 = 0; diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index 8c9c9f7f54ca..5c19c422c5cc 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -89,7 +89,6 @@ static int __init falconide_init(void) ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; ide_get_lock(NULL, NULL); ide_device_add(idx, NULL); diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index fcc8d52bf2a1..a0c9601bdaf0 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -182,8 +182,6 @@ found: ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; - idx[i] = index; } else release_mem_region(res_start, res_n); diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 60f52f5158c9..702d8deb5780 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -328,8 +328,16 @@ int probe_ht6560b = 0; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); +static const struct ide_port_ops ht6560b_port_ops = { + .port_init_devs = ht6560b_port_init_devs, + .set_pio_mode = ht6560b_set_pio_mode, + .selectproc = ht6560b_selectproc, +}; + static const struct ide_port_info ht6560b_port_info __initdata = { + .name = DRV_NAME, .chipset = ide_ht6560b, + .port_ops = &ht6560b_port_ops, .host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */ IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE | @@ -339,53 +347,21 @@ static const struct ide_port_info ht6560b_port_info __initdata = { static int __init ht6560b_init(void) { - ide_hwif_t *hwif, *mate; - static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - hw_regs_t hw[2]; - if (probe_ht6560b == 0) return -ENODEV; if (!request_region(HT_CONFIG_PORT, 1, DRV_NAME)) { printk(KERN_NOTICE "%s: HT_CONFIG_PORT not found\n", - __FUNCTION__); + __func__); return -ENODEV; } if (!try_to_init_ht6560b()) { - printk(KERN_NOTICE "%s: HBA not found\n", __FUNCTION__); + printk(KERN_NOTICE "%s: HBA not found\n", __func__); goto release_region; } - memset(&hw, 0, sizeof(hw)); - - ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); - hw[0].irq = 14; - - ide_std_init_ports(&hw[1], 0x170, 0x376); - hw[1].irq = 15; - - hwif = ide_find_port(); - if (hwif) { - ide_init_port_hw(hwif, &hw[0]); - hwif->selectproc = ht6560b_selectproc; - hwif->set_pio_mode = ht6560b_set_pio_mode; - hwif->port_init_devs = ht6560b_port_init_devs; - idx[0] = hwif->index; - } - - mate = ide_find_port(); - if (mate) { - ide_init_port_hw(mate, &hw[1]); - mate->selectproc = ht6560b_selectproc; - mate->set_pio_mode = ht6560b_set_pio_mode; - mate->port_init_devs = ht6560b_port_init_devs; - idx[1] = mate->index; - } - - ide_device_add(idx, &ht6560b_port_info); - - return 0; + return ide_legacy_device_add(&ht6560b_port_info, 0); release_region: release_region(HT_CONFIG_PORT, 1); diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c index c352f12348af..17f94d0cb539 100644 --- a/drivers/ide/legacy/ide-4drives.c +++ b/drivers/ide/legacy/ide-4drives.c @@ -4,6 +4,8 @@ #include <linux/module.h> #include <linux/ide.h> +#define DRV_NAME "ide-4drives" + int probe_4drives; module_param_named(probe, probe_4drives, bool, 0); @@ -12,15 +14,29 @@ MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); static int __init ide_4drives_init(void) { ide_hwif_t *hwif, *mate; + unsigned long base = 0x1f0, ctl = 0x3f6; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw; if (probe_4drives == 0) return -ENODEV; + if (!request_region(base, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + DRV_NAME, base, base + 7); + return -EBUSY; + } + + if (!request_region(ctl, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + DRV_NAME, ctl); + release_region(base, 8); + return -EBUSY; + } + memset(&hw, 0, sizeof(hw)); - ide_std_init_ports(&hw, 0x1f0, 0x3f6); + ide_std_init_ports(&hw, base, ctl); hw.irq = 14; hw.chipset = ide_4drives; diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index b97b8d51b3eb..855e157b18d3 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -51,6 +51,8 @@ #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> +#define DRV_NAME "ide-cs" + /*====================================================================*/ /* Module parameters */ @@ -72,16 +74,11 @@ static char *version = /*====================================================================*/ -static const char ide_major[] = { - IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR, - IDE4_MAJOR, IDE5_MAJOR -}; - typedef struct ide_info_t { struct pcmcia_device *p_dev; + ide_hwif_t *hwif; int ndev; dev_node_t node; - int hd; } ide_info_t; static void ide_release(struct pcmcia_device *); @@ -136,20 +133,44 @@ static int ide_probe(struct pcmcia_device *link) static void ide_detach(struct pcmcia_device *link) { + ide_info_t *info = link->priv; + ide_hwif_t *hwif = info->hwif; + DEBUG(0, "ide_detach(0x%p)\n", link); ide_release(link); - kfree(link->priv); + release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1); + release_region(hwif->io_ports[IDE_DATA_OFFSET], 8); + + kfree(info); } /* ide_detach */ -static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle) +static const struct ide_port_ops idecs_port_ops = { + .quirkproc = ide_undecoded_slave, +}; + +static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, + unsigned long irq, struct pcmcia_device *handle) { ide_hwif_t *hwif; hw_regs_t hw; int i; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + if (!request_region(io, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + DRV_NAME, io, io + 7); + return NULL; + } + + if (!request_region(ctl, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + DRV_NAME, ctl); + release_region(io, 8); + return NULL; + } + memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, io, ctl); hw.irq = irq; @@ -158,7 +179,7 @@ static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq hwif = ide_find_port(); if (hwif == NULL) - return -1; + goto out_release; i = hwif->index; @@ -168,13 +189,19 @@ static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); - hwif->quirkproc = &ide_undecoded_slave; + hwif->port_ops = &idecs_port_ops; idx[0] = i; ide_device_add(idx, NULL); - return hwif->present ? i : -1; + if (hwif->present) + return hwif; + +out_release: + release_region(ctl, 1); + release_region(io, 8); + return NULL; } /*====================================================================== @@ -199,8 +226,9 @@ static int ide_config(struct pcmcia_device *link) cistpl_cftable_entry_t dflt; } *stk = NULL; cistpl_cftable_entry_t *cfg; - int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0; + int i, pass, last_ret = 0, last_fn = 0, is_kme = 0; unsigned long io_base, ctl_base; + ide_hwif_t *hwif; DEBUG(0, "ide_config(0x%p)\n", link); @@ -296,14 +324,15 @@ static int ide_config(struct pcmcia_device *link) outb(0x81, ctl_base+1); /* retry registration in case device is still spinning up */ - for (hd = -1, i = 0; i < 10; i++) { - hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); - if (hd >= 0) break; + for (i = 0; i < 10; i++) { + hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); + if (hwif) + break; if (link->io.NumPorts1 == 0x20) { outb(0x02, ctl_base + 0x10); - hd = idecs_register(io_base + 0x10, ctl_base + 0x10, - link->irq.AssignedIRQ, link); - if (hd >= 0) { + hwif = idecs_register(io_base + 0x10, ctl_base + 0x10, + link->irq.AssignedIRQ, link); + if (hwif) { io_base += 0x10; ctl_base += 0x10; break; @@ -312,7 +341,7 @@ static int ide_config(struct pcmcia_device *link) msleep(100); } - if (hd < 0) { + if (hwif == NULL) { printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx" ", irq %u failed\n", io_base, ctl_base, link->irq.AssignedIRQ); @@ -320,10 +349,10 @@ static int ide_config(struct pcmcia_device *link) } info->ndev = 1; - sprintf(info->node.dev_name, "hd%c", 'a' + (hd * 2)); - info->node.major = ide_major[hd]; + sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2); + info->node.major = hwif->major; info->node.minor = 0; - info->hd = hd; + info->hwif = hwif; link->dev_node = &info->node; printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n", info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10); @@ -354,13 +383,14 @@ failed: void ide_release(struct pcmcia_device *link) { ide_info_t *info = link->priv; + ide_hwif_t *hwif = info->hwif; DEBUG(0, "ide_release(0x%p)\n", link); if (info->ndev) { /* FIXME: if this fails we need to queue the cleanup somehow -- need to investigate the required PCMCIA magic */ - ide_unregister(info->hd); + ide_unregister(hwif->index); } info->ndev = 0; diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index bf240775531e..822f48b05c70 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -100,7 +100,6 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) hw.dev = &pdev->dev; ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; if (mmio) default_hwif_mmiops(hwif); diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index 7429b80cb089..26546d0afc7f 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -128,8 +128,6 @@ static int __init macide_init(void) ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; - ide_device_add(idx, NULL); } diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index fcbff0eced1b..f23999dd3d46 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -141,7 +141,6 @@ static int __init q40ide_init(void) if (hwif) { ide_init_port_data(hwif, hwif->index); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; idx[i] = hwif->index; } diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 6e820c7c5c6b..15a99aae0cf9 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -37,6 +37,8 @@ #include <asm/system.h> #include <asm/io.h> +#define DRV_NAME "qd65xx" + #include "qd65xx.h" /* @@ -304,7 +306,20 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif) hwif->drives[1].drive_data = t2; } +static const struct ide_port_ops qd6500_port_ops = { + .port_init_devs = qd6500_port_init_devs, + .set_pio_mode = qd6500_set_pio_mode, + .selectproc = qd65xx_select, +}; + +static const struct ide_port_ops qd6580_port_ops = { + .port_init_devs = qd6580_port_init_devs, + .set_pio_mode = qd6580_set_pio_mode, + .selectproc = qd65xx_select, +}; + static const struct ide_port_info qd65xx_port_info __initdata = { + .name = DRV_NAME, .chipset = ide_qd65xx, .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_NO_DMA | @@ -321,10 +336,8 @@ static const struct ide_port_info qd65xx_port_info __initdata = { static int __init qd_probe(int base) { - ide_hwif_t *hwif; - u8 config, unit; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - hw_regs_t hw[2]; + int rc; + u8 config, unit, control; struct ide_port_info d = qd65xx_port_info; config = inb(QD_CONFIG_PORT); @@ -337,21 +350,11 @@ static int __init qd_probe(int base) if (unit) d.host_flags |= IDE_HFLAG_QD_2ND_PORT; - memset(&hw, 0, sizeof(hw)); - - ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); - hw[0].irq = 14; - - ide_std_init_ports(&hw[1], 0x170, 0x376); - hw[1].irq = 15; - - if ((config & 0xf0) == QD_CONFIG_QD6500) { - + switch (config & 0xf0) { + case QD_CONFIG_QD6500: if (qd_testreg(base)) return -ENODEV; /* bad register */ - /* qd6500 found */ - if (config & QD_CONFIG_DISABLED) { printk(KERN_WARNING "qd6500 is disabled !\n"); return -ENODEV; @@ -361,37 +364,14 @@ static int __init qd_probe(int base) printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n", config, QD_ID3); + d.port_ops = &qd6500_port_ops; d.host_flags |= IDE_HFLAG_SINGLE; - - hwif = ide_find_port_slot(&d); - if (hwif == NULL) - return -ENOENT; - - ide_init_port_hw(hwif, &hw[unit]); - - hwif->config_data = (base << 8) | config; - - hwif->port_init_devs = qd6500_port_init_devs; - hwif->set_pio_mode = qd6500_set_pio_mode; - hwif->selectproc = qd65xx_select; - - idx[unit] = hwif->index; - - ide_device_add(idx, &d); - - return 1; - } - - if (((config & 0xf0) == QD_CONFIG_QD6580_A) || - ((config & 0xf0) == QD_CONFIG_QD6580_B)) { - - u8 control; - + break; + case QD_CONFIG_QD6580_A: + case QD_CONFIG_QD6580_B: if (qd_testreg(base) || qd_testreg(base + 0x02)) return -ENODEV; /* bad registers */ - /* qd6580 found */ - control = inb(QD_CONTROL_PORT); printk(KERN_NOTICE "qd6580 at %#x\n", base); @@ -400,63 +380,23 @@ static int __init qd_probe(int base) outb(QD_DEF_CONTR, QD_CONTROL_PORT); - if (control & QD_CONTR_SEC_DISABLED) { - /* secondary disabled */ - - printk(KERN_INFO "qd6580: single IDE board\n"); - + d.port_ops = &qd6580_port_ops; + if (control & QD_CONTR_SEC_DISABLED) d.host_flags |= IDE_HFLAG_SINGLE; - hwif = ide_find_port_slot(&d); - if (hwif == NULL) - return -ENOENT; - - ide_init_port_hw(hwif, &hw[unit]); - - hwif->config_data = (base << 8) | config; - - hwif->port_init_devs = qd6580_port_init_devs; - hwif->set_pio_mode = qd6580_set_pio_mode; - hwif->selectproc = qd65xx_select; + printk(KERN_INFO "qd6580: %s IDE board\n", + (control & QD_CONTR_SEC_DISABLED) ? "single" : "dual"); + break; + default: + return -ENODEV; + } - idx[unit] = hwif->index; + rc = ide_legacy_device_add(&d, (base << 8) | config); - ide_device_add(idx, &d); + if (d.host_flags & IDE_HFLAG_SINGLE) + return (rc == 0) ? 1 : rc; - return 1; - } else { - ide_hwif_t *mate; - - /* secondary enabled */ - printk(KERN_INFO "qd6580: dual IDE board\n"); - - hwif = ide_find_port(); - if (hwif) { - ide_init_port_hw(hwif, &hw[0]); - hwif->config_data = (base << 8) | config; - hwif->port_init_devs = qd6580_port_init_devs; - hwif->set_pio_mode = qd6580_set_pio_mode; - hwif->selectproc = qd65xx_select; - idx[0] = hwif->index; - } - - mate = ide_find_port(); - if (mate) { - ide_init_port_hw(mate, &hw[1]); - mate->config_data = (base << 8) | config; - mate->port_init_devs = qd6580_port_init_devs; - mate->set_pio_mode = qd6580_set_pio_mode; - mate->selectproc = qd65xx_select; - idx[1] = mate->index; - } - - ide_device_add(idx, &qd65xx_port_info); - - return 0; /* no other qd65xx possible */ - } - } - /* no qd65xx found */ - return -ENODEV; + return rc; } int probe_qd65xx = 0; diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c index 4d90badd2bda..17d515329fe0 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/legacy/umc8672.c @@ -51,6 +51,8 @@ #include <asm/io.h> +#define DRV_NAME "umc8672" + /* * Default speeds. These can be changed with "auto-tune" and/or hdparm. */ @@ -120,18 +122,21 @@ static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&ide_lock, flags); } +static const struct ide_port_ops umc8672_port_ops = { + .set_pio_mode = umc_set_pio_mode, +}; + static const struct ide_port_info umc8672_port_info __initdata = { + .name = DRV_NAME, .chipset = ide_umc8672, + .port_ops = &umc8672_port_ops, .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE, .pio_mask = ATA_PIO4, }; static int __init umc8672_probe(void) { - ide_hwif_t *hwif, *mate; unsigned long flags; - static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - hw_regs_t hw[2]; if (!request_region(0x108, 2, "umc8672")) { printk(KERN_ERR "umc8672: ports 0x108-0x109 already in use.\n"); @@ -150,31 +155,7 @@ static int __init umc8672_probe(void) umc_set_speeds(current_speeds); local_irq_restore(flags); - memset(&hw, 0, sizeof(hw)); - - ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); - hw[0].irq = 14; - - ide_std_init_ports(&hw[1], 0x170, 0x376); - hw[1].irq = 15; - - hwif = ide_find_port(); - if (hwif) { - ide_init_port_hw(hwif, &hw[0]); - hwif->set_pio_mode = umc_set_pio_mode; - idx[0] = hwif->index; - } - - mate = ide_find_port(); - if (mate) { - ide_init_port_hw(mate, &hw[1]); - mate->set_pio_mode = umc_set_pio_mode; - idx[1] = mate->index; - } - - ide_device_add(idx, &umc8672_port_info); - - return 0; + return ide_legacy_device_add(&umc8672_port_info, 0); } int probe_umc8672; diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index a8cd0035936d..3485a310c95b 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -47,7 +47,6 @@ #define IDE_AU1XXX_BURSTMODE 1 static _auide_hwif auide_hwif; -static int dbdma_init_done; static int auide_ddma_init(_auide_hwif *auide); @@ -61,7 +60,7 @@ void auide_insw(unsigned long port, void *addr, u32 count) if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, DDMA_FLAGS_NOIE)) { - printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); + printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; } ctp = *((chan_tab_t **)ahwif->rx_chan); @@ -79,7 +78,7 @@ void auide_outsw(unsigned long port, void *addr, u32 count) if(!put_source_flags(ahwif->tx_chan, (void*)addr, count << 1, DDMA_FLAGS_NOIE)) { - printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); + printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; } ctp = *((chan_tab_t **)ahwif->tx_chan); @@ -250,7 +249,7 @@ static int auide_build_dmatable(ide_drive_t *drive) (void*) sg_virt(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); } } else { @@ -258,7 +257,7 @@ static int auide_build_dmatable(ide_drive_t *drive) (void*) sg_virt(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); } } @@ -315,35 +314,6 @@ static int auide_dma_setup(ide_drive_t *drive) return 0; } -static u8 auide_mdma_filter(ide_drive_t *drive) -{ - /* - * FIXME: ->white_list and ->black_list are based on completely bogus - * ->ide_dma_check implementation which didn't set neither the host - * controller timings nor the device for the desired transfer mode. - * - * They should be either removed or 0x00 MWDMA mask should be - * returned for devices on the ->black_list. - */ - - if (dbdma_init_done == 0) { - auide_hwif.white_list = ide_in_drive_list(drive->id, - dma_white_list); - auide_hwif.black_list = ide_in_drive_list(drive->id, - dma_black_list); - auide_hwif.drive = drive; - auide_ddma_init(&auide_hwif); - dbdma_init_done = 1; - } - - /* Is the drive in our DMA black list? */ - if (auide_hwif.black_list) - printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n", - drive->name, drive->id->model); - - return drive->hwif->mwdma_mask; -} - static int auide_dma_test_irq(ide_drive_t *drive) { if (drive->waiting_for_dma == 0) @@ -396,41 +366,41 @@ static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 de dev->dev_devwidth = devwidth; dev->dev_flags = flags; } - -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA static void auide_dma_timeout(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); - if (hwif->ide_dma_test_irq(drive)) + if (auide_dma_test_irq(drive)) return; - hwif->ide_dma_end(drive); + auide_dma_end(drive); } - -static int auide_ddma_init(_auide_hwif *auide) { - +static const struct ide_dma_ops au1xxx_dma_ops = { + .dma_host_set = auide_dma_host_set, + .dma_setup = auide_dma_setup, + .dma_exec_cmd = auide_dma_exec_cmd, + .dma_start = auide_dma_start, + .dma_end = auide_dma_end, + .dma_test_irq = auide_dma_test_irq, + .dma_lost_irq = auide_dma_lost_irq, + .dma_timeout = auide_dma_timeout, +}; + +static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) +{ + _auide_hwif *auide = (_auide_hwif *)hwif->hwif_data; dbdev_tab_t source_dev_tab, target_dev_tab; u32 dev_id, tsize, devwidth, flags; - ide_hwif_t *hwif = auide->hwif; dev_id = AU1XXX_ATA_DDMA_REQ; - if (auide->white_list || auide->black_list) { - tsize = 8; - devwidth = 32; - } - else { - tsize = 1; - devwidth = 16; - - printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model); - printk(KERN_ERR " please read 'Documentation/mips/AU1xxx_IDE.README'"); - } + tsize = 8; /* 1 */ + devwidth = 32; /* 16 */ #ifdef IDE_AU1XXX_BURSTMODE flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE; @@ -482,9 +452,9 @@ static int auide_ddma_init(_auide_hwif *auide) { return 0; } #else - -static int auide_ddma_init( _auide_hwif *auide ) +static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { + _auide_hwif *auide = (_auide_hwif *)hwif->hwif_data; dbdev_tab_t source_dev_tab; int flags; @@ -543,9 +513,18 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) *ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET); } +static const struct ide_port_ops au1xxx_port_ops = { + .set_pio_mode = au1xxx_set_pio_mode, + .set_dma_mode = auide_set_dma_mode, +}; + static const struct ide_port_info au1xxx_port_info = { + .init_dma = auide_ddma_init, + .port_ops = &au1xxx_port_ops, +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + .dma_ops = &au1xxx_dma_ops, +#endif .host_flags = IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS, .pio_mask = ATA_PIO4, @@ -615,8 +594,6 @@ static int au_ide_probe(struct device *dev) hwif->dev = dev; - hwif->mmio = 1; - /* If the user has selected DDMA assisted copies, then set up a few local I/O function entry points */ @@ -625,34 +602,12 @@ static int au_ide_probe(struct device *dev) hwif->INSW = auide_insw; hwif->OUTSW = auide_outsw; #endif - - hwif->set_pio_mode = &au1xxx_set_pio_mode; - hwif->set_dma_mode = &auide_set_dma_mode; - -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - hwif->dma_timeout = &auide_dma_timeout; - - hwif->mdma_filter = &auide_mdma_filter; - - hwif->dma_host_set = &auide_dma_host_set; - hwif->dma_exec_cmd = &auide_dma_exec_cmd; - hwif->dma_start = &auide_dma_start; - hwif->ide_dma_end = &auide_dma_end; - hwif->dma_setup = &auide_dma_setup; - hwif->ide_dma_test_irq = &auide_dma_test_irq; - hwif->dma_lost_irq = &auide_dma_lost_irq; -#endif hwif->select_data = 0; /* no chipset-specific code */ hwif->config_data = 0; /* no chipset-specific code */ auide_hwif.hwif = hwif; hwif->hwif_data = &auide_hwif; -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - auide_ddma_init(&auide_hwif); - dbdma_init_done = 1; -#endif - idx[0] = hwif->index; ide_device_add(idx, &au1xxx_port_info); diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index bbe8d5853348..112fe566bb93 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -110,10 +110,8 @@ static int __devinit swarm_ide_probe(struct device *dev) /* Setup MMIO ops. */ default_hwif_mmiops(hwif); - /* Prevent resource map manipulation. */ - hwif->mmio = 1; + hwif->chipset = ide_generic; - hwif->noprobe = 0; for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) hwif->io_ports[i] = diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index c9ba15afe97d..ca16f37f9486 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -135,7 +135,7 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) { - drive->hwif->set_dma_mode(drive, pio + XFER_PIO_0); + drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0); } static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name) @@ -175,27 +175,23 @@ static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif) return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } -static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->set_pio_mode = &aec_set_pio_mode; - - if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) - hwif->set_dma_mode = &aec6210_set_mode; - else { - hwif->set_dma_mode = &aec6260_set_mode; +static const struct ide_port_ops atp850_port_ops = { + .set_pio_mode = aec_set_pio_mode, + .set_dma_mode = aec6210_set_mode, +}; - hwif->cable_detect = atp86x_cable_detect; - } -} +static const struct ide_port_ops atp86x_port_ops = { + .set_pio_mode = aec_set_pio_mode, + .set_dma_mode = aec6260_set_mode, + .cable_detect = atp86x_cable_detect, +}; static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { { /* 0 */ .name = "AEC6210", .init_chipset = init_chipset_aec62xx, - .init_hwif = init_hwif_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, + .port_ops = &atp850_port_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_DSC | @@ -207,7 +203,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { },{ /* 1 */ .name = "AEC6260", .init_chipset = init_chipset_aec62xx, - .init_hwif = init_hwif_aec62xx, + .port_ops = &atp86x_port_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA | IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_OFF_BOARD, @@ -217,8 +213,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { },{ /* 2 */ .name = "AEC6260R", .init_chipset = init_chipset_aec62xx, - .init_hwif = init_hwif_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, + .port_ops = &atp86x_port_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_NON_BOOTABLE, @@ -228,7 +224,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { },{ /* 3 */ .name = "AEC6280", .init_chipset = init_chipset_aec62xx, - .init_hwif = init_hwif_aec62xx, + .port_ops = &atp86x_port_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_OFF_BOARD, @@ -238,8 +234,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { },{ /* 4 */ .name = "AEC6280R", .init_chipset = init_chipset_aec62xx, - .init_hwif = init_hwif_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, + .port_ops = &atp86x_port_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_OFF_BOARD, diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 3fa2d9f7b1b2..b5a3bc33e167 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -610,7 +610,7 @@ static int ali_cable_override(struct pci_dev *pdev) } /** - * ata66_ali15x3 - check for UDMA 66 support + * ali_cable_detect - cable detection * @hwif: IDE interface * * This checks if the controller and the cable are capable @@ -620,7 +620,7 @@ static int ali_cable_override(struct pci_dev *pdev) * FIXME: frobs bits that are not defined on newer ALi devicea */ -static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif) +static u8 __devinit ali_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long flags; @@ -652,27 +652,7 @@ static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif) return cbl; } -/** - * init_hwif_common_ali15x3 - Set up ALI IDE hardware - * @hwif: IDE interface - * - * Initialize the IDE structure side of the ALi 15x3 driver. - */ - -static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &ali_set_pio_mode; - hwif->set_dma_mode = &ali_set_dma_mode; - hwif->udma_filter = &ali_udma_filter; - - hwif->cable_detect = ata66_ali15x3; - - if (hwif->dma_base == 0) - return; - - hwif->dma_setup = &ali15x3_dma_setup; -} - +#ifndef CONFIG_SPARC64 /** * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff * @hwif: interface to configure @@ -722,34 +702,66 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) if(irq >= 0) hwif->irq = irq; } - - init_hwif_common_ali15x3(hwif); } +#endif /** * init_dma_ali15x3 - set up DMA on ALi15x3 * @hwif: IDE interface - * @dmabase: DMA interface base PCI address + * @d: IDE port info * - * Set up the DMA functionality on the ALi 15x3. For the ALi - * controllers this is generic so we can let the generic code do - * the actual work. + * Set up the DMA functionality on the ALi 15x3. */ -static void __devinit init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase) +static int __devinit init_dma_ali15x3(ide_hwif_t *hwif, + const struct ide_port_info *d) { - if (m5229_revision < 0x20) - return; + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long base = ide_pci_dma_base(hwif, d); + + if (base == 0 || ide_pci_set_master(dev, d->name) < 0) + return -1; + if (!hwif->channel) - outb(inb(dmabase + 2) & 0x60, dmabase + 2); - ide_setup_dma(hwif, dmabase); + outb(inb(base + 2) & 0x60, base + 2); + + printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", + hwif->name, base, base + 7); + + if (ide_allocate_dma_engine(hwif)) + return -1; + + ide_setup_dma(hwif, base); + + return 0; } +static const struct ide_port_ops ali_port_ops = { + .set_pio_mode = ali_set_pio_mode, + .set_dma_mode = ali_set_dma_mode, + .udma_filter = ali_udma_filter, + .cable_detect = ali_cable_detect, +}; + +static const struct ide_dma_ops ali_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ali15x3_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + static const struct ide_port_info ali15x3_chipset __devinitdata = { .name = "ALI15X3", .init_chipset = init_chipset_ali15x3, +#ifndef CONFIG_SPARC64 .init_hwif = init_hwif_ali15x3, +#endif .init_dma = init_dma_ali15x3, + .port_ops = &ali_port_ops, .pio_mask = ATA_PIO5, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, @@ -792,14 +804,17 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev d.udma_mask = ATA_UDMA5; else d.udma_mask = ATA_UDMA6; + + d.dma_ops = &ali_dma_ops; + } else { + d.host_flags |= IDE_HFLAG_NO_DMA; + + d.mwdma_mask = d.swdma_mask = 0; } if (idx == 0) d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX; -#if defined(CONFIG_SPARC64) - d.init_hwif = init_hwif_common_ali15x3; -#endif /* CONFIG_SPARC64 */ return ide_setup_pci_device(dev, &d); } diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index ff684d312378..f7c883808b02 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -210,13 +210,14 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) if (hwif->irq == 0) /* 0 is bogus but will do for now */ hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel); - - hwif->set_pio_mode = &amd_set_pio_mode; - hwif->set_dma_mode = &amd_set_drive; - - hwif->cable_detect = amd_cable_detect; } +static const struct ide_port_ops amd_port_ops = { + .set_pio_mode = amd_set_pio_mode, + .set_dma_mode = amd_set_drive, + .cable_detect = amd_cable_detect, +}; + #define IDE_HFLAGS_AMD \ (IDE_HFLAG_PIO_NO_BLACKLIST | \ IDE_HFLAG_ABUSE_SET_DMA_MODE | \ @@ -230,6 +231,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) .init_chipset = init_chipset_amd74xx, \ .init_hwif = init_hwif_amd74xx, \ .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \ + .port_ops = &amd_port_ops, \ .host_flags = IDE_HFLAGS_AMD, \ .pio_mask = ATA_PIO5, \ .swdma_mask = swdma, \ @@ -243,6 +245,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) .init_chipset = init_chipset_amd74xx, \ .init_hwif = init_hwif_amd74xx, \ .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \ + .port_ops = &amd_port_ops, \ .host_flags = IDE_HFLAGS_AMD, \ .pio_mask = ATA_PIO5, \ .swdma_mask = ATA_SWDMA2, \ diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 91722f88b7bd..8b637181681a 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -130,35 +130,25 @@ static u8 __devinit atiixp_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA40; } -/** - * init_hwif_atiixp - fill in the hwif for the ATIIXP - * @hwif: IDE interface - * - * Set up the ide_hwif_t for the ATIIXP interface according to the - * capabilities of the hardware. - */ - -static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &atiixp_set_pio_mode; - hwif->set_dma_mode = &atiixp_set_dma_mode; - - hwif->cable_detect = atiixp_cable_detect; -} +static const struct ide_port_ops atiixp_port_ops = { + .set_pio_mode = atiixp_set_pio_mode, + .set_dma_mode = atiixp_set_dma_mode, + .cable_detect = atiixp_cable_detect, +}; static const struct ide_port_info atiixp_pci_info[] __devinitdata = { { /* 0 */ .name = "ATIIXP", - .init_hwif = init_hwif_atiixp, .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, + .port_ops = &atiixp_port_ops, .host_flags = IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, },{ /* 1 */ .name = "SB600_PATA", - .init_hwif = init_hwif_atiixp, .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}}, + .port_ops = &atiixp_port_ops, .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index b076dbfc43a7..25c2f1bd175f 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -109,6 +109,8 @@ #include <asm/io.h> +#define DRV_NAME "cmd640" + /* * This flag is set in ide.c by the parameter: ide0=cmd640_vlb */ @@ -633,6 +635,9 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) display_clocks(index); } +static const struct ide_port_ops cmd640_port_ops = { + .set_pio_mode = cmd640_set_pio_mode, +}; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ static int pci_conf1(void) @@ -678,10 +683,29 @@ static const struct ide_port_info cmd640_port_info __initdata = { IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_ABUSE_FAST_DEVSEL, #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + .port_ops = &cmd640_port_ops, .pio_mask = ATA_PIO5, #endif }; +static int cmd640x_init_one(unsigned long base, unsigned long ctl) +{ + if (!request_region(base, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + DRV_NAME, base, base + 7); + return -EBUSY; + } + + if (!request_region(ctl, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + DRV_NAME, ctl); + release_region(base, 8); + return -EBUSY; + } + + return 0; +} + /* * Probe for a cmd640 chipset, and initialize it if found. */ @@ -690,7 +714,7 @@ static int __init cmd640x_init(void) #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED int second_port_toggled = 0; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - int second_port_cmd640 = 0; + int second_port_cmd640 = 0, rc; const char *bus_type, *port2; unsigned int index; u8 b, cfr; @@ -734,6 +758,17 @@ static int __init cmd640x_init(void) return 0; } + rc = cmd640x_init_one(0x1f0, 0x3f6); + if (rc) + return rc; + + rc = cmd640x_init_one(0x170, 0x376); + if (rc) { + release_region(0x3f6, 1); + release_region(0x1f0, 8); + return rc; + } + memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); @@ -752,10 +787,6 @@ static int __init cmd640x_init(void) */ if (cmd_hwif0) { ide_init_port_hw(cmd_hwif0, &hw[0]); -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - idx[0] = cmd_hwif0->index; } @@ -808,10 +839,6 @@ static int __init cmd640x_init(void) */ if (second_port_cmd640 && cmd_hwif1) { ide_init_port_hw(cmd_hwif1, &hw[1]); -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - idx[1] = cmd_hwif1->index; } printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n", diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 8baccfef237f..006fb62656bc 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -223,7 +223,7 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) (void) pci_write_config_byte(dev, pciU, regU); } -static int cmd648_ide_dma_end (ide_drive_t *drive) +static int cmd648_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long base = hwif->dma_base - (hwif->channel * 8); @@ -239,7 +239,7 @@ static int cmd648_ide_dma_end (ide_drive_t *drive) return err; } -static int cmd64x_ide_dma_end (ide_drive_t *drive) +static int cmd64x_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -256,7 +256,7 @@ static int cmd64x_ide_dma_end (ide_drive_t *drive) return err; } -static int cmd648_ide_dma_test_irq (ide_drive_t *drive) +static int cmd648_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long base = hwif->dma_base - (hwif->channel * 8); @@ -279,7 +279,7 @@ static int cmd648_ide_dma_test_irq (ide_drive_t *drive) return 0; } -static int cmd64x_ide_dma_test_irq (ide_drive_t *drive) +static int cmd64x_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -310,7 +310,7 @@ static int cmd64x_ide_dma_test_irq (ide_drive_t *drive) * event order for DMA transfers. */ -static int cmd646_1_ide_dma_end (ide_drive_t *drive) +static int cmd646_1_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 dma_stat = 0, dma_cmd = 0; @@ -370,7 +370,7 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha return 0; } -static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif) +static u8 __devinit cmd64x_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01; @@ -385,60 +385,52 @@ static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif) } } -static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->set_pio_mode = &cmd64x_set_pio_mode; - hwif->set_dma_mode = &cmd64x_set_dma_mode; - - hwif->cable_detect = ata66_cmd64x; +static const struct ide_port_ops cmd64x_port_ops = { + .set_pio_mode = cmd64x_set_pio_mode, + .set_dma_mode = cmd64x_set_dma_mode, + .cable_detect = cmd64x_cable_detect, +}; - if (!hwif->dma_base) - return; +static const struct ide_dma_ops cmd64x_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = cmd64x_dma_end, + .dma_test_irq = cmd64x_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; - /* - * UltraDMA only supported on PCI646U and PCI646U2, which - * correspond to revisions 0x03, 0x05 and 0x07 respectively. - * Actually, although the CMD tech support people won't - * tell me the details, the 0x03 revision cannot support - * UDMA correctly without hardware modifications, and even - * then it only works with Quantum disks due to some - * hold time assumptions in the 646U part which are fixed - * in the 646U2. - * - * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. - */ - if (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 5) - hwif->ultra_mask = 0x00; +static const struct ide_dma_ops cmd646_rev1_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = cmd646_1_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; - switch (dev->device) { - case PCI_DEVICE_ID_CMD_648: - case PCI_DEVICE_ID_CMD_649: - alt_irq_bits: - hwif->ide_dma_end = &cmd648_ide_dma_end; - hwif->ide_dma_test_irq = &cmd648_ide_dma_test_irq; - break; - case PCI_DEVICE_ID_CMD_646: - if (dev->revision == 0x01) { - hwif->ide_dma_end = &cmd646_1_ide_dma_end; - break; - } else if (dev->revision >= 0x03) - goto alt_irq_bits; - /* fall thru */ - default: - hwif->ide_dma_end = &cmd64x_ide_dma_end; - hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq; - break; - } -} +static const struct ide_dma_ops cmd648_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = cmd648_dma_end, + .dma_test_irq = cmd648_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { { /* 0 */ .name = "CMD643", .init_chipset = init_chipset_cmd64x, - .init_hwif = init_hwif_cmd64x, .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}}, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd64x_dma_ops, .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, @@ -447,9 +439,10 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { },{ /* 1 */ .name = "CMD646", .init_chipset = init_chipset_cmd64x, - .init_hwif = init_hwif_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .chipset = ide_cmd646, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd648_dma_ops, .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, @@ -457,8 +450,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { },{ /* 2 */ .name = "CMD648", .init_chipset = init_chipset_cmd64x, - .init_hwif = init_hwif_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd648_dma_ops, .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, @@ -466,8 +460,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { },{ /* 3 */ .name = "CMD649", .init_chipset = init_chipset_cmd64x, - .init_hwif = init_hwif_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd648_dma_ops, .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, @@ -482,12 +477,35 @@ static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_devic d = cmd64x_chipsets[idx]; - /* - * The original PCI0646 didn't have the primary channel enable bit, - * it appeared starting with PCI0646U (i.e. revision ID 3). - */ - if (idx == 1 && dev->revision < 3) - d.enablebits[0].reg = 0; + if (idx == 1) { + /* + * UltraDMA only supported on PCI646U and PCI646U2, which + * correspond to revisions 0x03, 0x05 and 0x07 respectively. + * Actually, although the CMD tech support people won't + * tell me the details, the 0x03 revision cannot support + * UDMA correctly without hardware modifications, and even + * then it only works with Quantum disks due to some + * hold time assumptions in the 646U part which are fixed + * in the 646U2. + * + * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. + */ + if (dev->revision < 5) { + d.udma_mask = 0x00; + /* + * The original PCI0646 didn't have the primary + * channel enable bit, it appeared starting with + * PCI0646U (i.e. revision ID 3). + */ + if (dev->revision < 3) { + d.enablebits[0].reg = 0; + if (dev->revision == 1) + d.dma_ops = &cmd646_rev1_dma_ops; + else + d.dma_ops = &cmd64x_dma_ops; + } + } + } return ide_setup_pci_device(dev, &d); } diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 01b37ecb5a5a..17669a434438 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -103,21 +103,27 @@ static void cs5520_dma_host_set(ide_drive_t *drive, int on) ide_dma_host_set(drive, on); } -static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &cs5520_set_pio_mode; - hwif->set_dma_mode = &cs5520_set_dma_mode; - - if (hwif->dma_base == 0) - return; +static const struct ide_port_ops cs5520_port_ops = { + .set_pio_mode = cs5520_set_pio_mode, + .set_dma_mode = cs5520_set_dma_mode, +}; - hwif->dma_host_set = &cs5520_dma_host_set; -} +static const struct ide_dma_ops cs5520_dma_ops = { + .dma_host_set = cs5520_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; #define DECLARE_CS_DEV(name_str) \ { \ .name = name_str, \ - .init_hwif = init_hwif_cs5520, \ + .port_ops = &cs5520_port_ops, \ + .dma_ops = &cs5520_dma_ops, \ .host_flags = IDE_HFLAG_ISA_PORTS | \ IDE_HFLAG_CS5520 | \ IDE_HFLAG_VDMA | \ diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index 56a369c2a78a..f5534c1ff349 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -228,26 +228,25 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) unsigned long basereg; u32 d0_timings; - hwif->set_pio_mode = &cs5530_set_pio_mode; - hwif->set_dma_mode = &cs5530_set_dma_mode; - basereg = CS5530_BASEREG(hwif); d0_timings = inl(basereg + 0); if (CS5530_BAD_PIO(d0_timings)) outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0); if (CS5530_BAD_PIO(inl(basereg + 8))) outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8); - - if (hwif->dma_base == 0) - return; - - hwif->udma_filter = cs5530_udma_filter; } +static const struct ide_port_ops cs5530_port_ops = { + .set_pio_mode = cs5530_set_pio_mode, + .set_dma_mode = cs5530_set_dma_mode, + .udma_filter = cs5530_udma_filter, +}; + static const struct ide_port_info cs5530_chipset __devinitdata = { .name = "CS5530", .init_chipset = init_chipset_cs5530, .init_hwif = init_hwif_cs5530, + .port_ops = &cs5530_port_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_POST_SET_MODE, .pio_mask = ATA_PIO4, diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index c9685f239c65..99fe91a191b8 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -166,25 +166,15 @@ static u8 __devinit cs5535_cable_detect(ide_hwif_t *hwif) return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } -/**** - * init_hwif_cs5535 - Initialize one ide cannel - * @hwif: Channel descriptor - * - * This gets invoked by the IDE driver once for each channel. It - * performs channel-specific pre-initialization before drive probing. - * - */ -static void __devinit init_hwif_cs5535(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &cs5535_set_pio_mode; - hwif->set_dma_mode = &cs5535_set_dma_mode; - - hwif->cable_detect = cs5535_cable_detect; -} +static const struct ide_port_ops cs5535_port_ops = { + .set_pio_mode = cs5535_set_pio_mode, + .set_dma_mode = cs5535_set_dma_mode, + .cable_detect = cs5535_cable_detect, +}; static const struct ide_port_info cs5535_chipset __devinitdata = { .name = "CS5535", - .init_hwif = init_hwif_cs5535, + .port_ops = &cs5535_port_ops, .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE | IDE_HFLAG_ABUSE_SET_DMA_MODE, .pio_mask = ATA_PIO4, diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 08eab7e7f051..e30eae5a01b6 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -382,15 +382,6 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c return 0; } -/* - * the init function - called for each ide channel once - */ -static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &cy82c693_set_pio_mode; - hwif->set_dma_mode = &cy82c693_set_dma_mode; -} - static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) { static ide_hwif_t *primary; @@ -404,11 +395,16 @@ static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) } } +static const struct ide_port_ops cy82c693_port_ops = { + .set_pio_mode = cy82c693_set_pio_mode, + .set_dma_mode = cy82c693_set_dma_mode, +}; + static const struct ide_port_info cy82c693_chipset __devinitdata = { .name = "CY82C693", .init_chipset = init_chipset_cy82c693, .init_iops = init_iops_cy82c693, - .init_hwif = init_hwif_cy82c693, + .port_ops = &cy82c693_port_ops, .chipset = ide_cy82c693, .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 753b86fc6637..c7b7e0483287 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -43,6 +43,10 @@ static const u8 setup[] = { 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13, }; +static const struct ide_port_ops delkin_cb_port_ops = { + .quirkproc = ide_undecoded_slave, +}; + static int __devinit delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) { @@ -89,8 +93,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; - hwif->quirkproc = &ide_undecoded_slave; + hwif->port_ops = &delkin_cb_port_ops; idx[0] = i; diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index 9f2fc3094000..84c36c117194 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c @@ -115,11 +115,10 @@ static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const cha return dev->irq; } -static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &hpt34x_set_pio_mode; - hwif->set_dma_mode = &hpt34x_set_mode; -} +static const struct ide_port_ops hpt34x_port_ops = { + .set_pio_mode = hpt34x_set_pio_mode, + .set_dma_mode = hpt34x_set_mode, +}; #define IDE_HFLAGS_HPT34X \ (IDE_HFLAG_NO_ATAPI_DMA | \ @@ -131,16 +130,14 @@ static const struct ide_port_info hpt34x_chipsets[] __devinitdata = { { /* 0 */ .name = "HPT343", .init_chipset = init_chipset_hpt34x, - .init_hwif = init_hwif_hpt34x, - .extra = 16, + .port_ops = &hpt34x_port_ops, .host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_NON_BOOTABLE, .pio_mask = ATA_PIO5, }, { /* 1 */ .name = "HPT345", .init_chipset = init_chipset_hpt34x, - .init_hwif = init_hwif_hpt34x, - .extra = 16, + .port_ops = &hpt34x_port_ops, .host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD, .pio_mask = ATA_PIO5, #ifdef CONFIG_HPT34X_AUTODMA diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index a49090672145..8c02961d0188 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -776,7 +776,7 @@ static void hpt366_dma_lost_irq(ide_drive_t *drive) pci_read_config_byte(dev, 0x52, &mcr3); pci_read_config_byte(dev, 0x5a, &scr1); printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n", - drive->name, __FUNCTION__, mcr1, mcr3, scr1); + drive->name, __func__, mcr1, mcr3, scr1); if (scr1 & 0x10) pci_write_config_byte(dev, 0x5a, scr1 & ~0x10); ide_dma_lost_irq(drive); @@ -808,7 +808,7 @@ static void hpt370_irq_timeout(ide_drive_t *drive) hpt370_clear_engine(drive); } -static void hpt370_ide_dma_start(ide_drive_t *drive) +static void hpt370_dma_start(ide_drive_t *drive) { #ifdef HPT_RESET_STATE_ENGINE hpt370_clear_engine(drive); @@ -816,7 +816,7 @@ static void hpt370_ide_dma_start(ide_drive_t *drive) ide_dma_start(drive); } -static int hpt370_ide_dma_end(ide_drive_t *drive) +static int hpt370_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 dma_stat = inb(hwif->dma_status); @@ -838,7 +838,7 @@ static void hpt370_dma_timeout(ide_drive_t *drive) } /* returns 1 if DMA IRQ issued, 0 otherwise */ -static int hpt374_ide_dma_test_irq(ide_drive_t *drive) +static int hpt374_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -858,11 +858,11 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive) if (!drive->waiting_for_dma) printk(KERN_WARNING "%s: (%s) called while not waiting\n", - drive->name, __FUNCTION__); + drive->name, __func__); return 0; } -static int hpt374_ide_dma_end(ide_drive_t *drive) +static int hpt374_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -1271,17 +1271,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) /* Cache the channel's MISC. control registers' offset */ hwif->select_data = hwif->channel ? 0x54 : 0x50; - hwif->set_pio_mode = &hpt3xx_set_pio_mode; - hwif->set_dma_mode = &hpt3xx_set_mode; - - hwif->quirkproc = &hpt3xx_quirkproc; - hwif->maskproc = &hpt3xx_maskproc; - - hwif->udma_filter = &hpt3xx_udma_filter; - hwif->mdma_filter = &hpt3xx_mdma_filter; - - hwif->cable_detect = hpt3xx_cable_detect; - /* * HPT3xxN chips have some complications: * @@ -1323,29 +1312,19 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) if (new_mcr != old_mcr) pci_write_config_byte(dev, hwif->select_data + 1, new_mcr); - - if (hwif->dma_base == 0) - return; - - if (chip_type >= HPT374) { - hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq; - hwif->ide_dma_end = &hpt374_ide_dma_end; - } else if (chip_type >= HPT370) { - hwif->dma_start = &hpt370_ide_dma_start; - hwif->ide_dma_end = &hpt370_ide_dma_end; - hwif->dma_timeout = &hpt370_dma_timeout; - } else - hwif->dma_lost_irq = &hpt366_dma_lost_irq; } -static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase) +static int __devinit init_dma_hpt366(ide_hwif_t *hwif, + const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 masterdma = 0, slavedma = 0; - u8 dma_new = 0, dma_old = 0; - unsigned long flags; + unsigned long flags, base = ide_pci_dma_base(hwif, d); + u8 dma_old, dma_new, masterdma = 0, slavedma = 0; - dma_old = inb(dmabase + 2); + if (base == 0 || ide_pci_set_master(dev, d->name) < 0) + return -1; + + dma_old = inb(base + 2); local_irq_save(flags); @@ -1356,11 +1335,21 @@ static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase) if (masterdma & 0x30) dma_new |= 0x20; if ( slavedma & 0x30) dma_new |= 0x40; if (dma_new != dma_old) - outb(dma_new, dmabase + 2); + outb(dma_new, base + 2); local_irq_restore(flags); - ide_setup_dma(hwif, dmabase); + printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", + hwif->name, base, base + 7); + + hwif->extra_base = base + (hwif->channel ? 8 : 16); + + if (ide_allocate_dma_engine(hwif)) + return -1; + + ide_setup_dma(hwif, base); + + return 0; } static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2) @@ -1416,6 +1405,49 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2) IDE_HFLAG_ABUSE_SET_DMA_MODE | \ IDE_HFLAG_OFF_BOARD) +static const struct ide_port_ops hpt3xx_port_ops = { + .set_pio_mode = hpt3xx_set_pio_mode, + .set_dma_mode = hpt3xx_set_mode, + .quirkproc = hpt3xx_quirkproc, + .maskproc = hpt3xx_maskproc, + .mdma_filter = hpt3xx_mdma_filter, + .udma_filter = hpt3xx_udma_filter, + .cable_detect = hpt3xx_cable_detect, +}; + +static const struct ide_dma_ops hpt37x_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = hpt374_dma_end, + .dma_test_irq = hpt374_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + +static const struct ide_dma_ops hpt370_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = hpt370_dma_start, + .dma_end = hpt370_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = hpt370_dma_timeout, +}; + +static const struct ide_dma_ops hpt36x_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = hpt366_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + static const struct ide_port_info hpt366_chipsets[] __devinitdata = { { /* 0 */ .name = "HPT36x", @@ -1429,7 +1461,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { * Bit 4 is for the primary channel, bit 5 for the secondary. */ .enablebits = {{0x50,0x10,0x10}, {0x54,0x04,0x04}}, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt36x_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1439,7 +1472,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt37x_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1449,7 +1483,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt37x_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1459,7 +1494,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt37x_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1470,7 +1506,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .udma_mask = ATA_UDMA5, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt37x_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1480,7 +1517,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt37x_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1543,6 +1581,10 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic d.name = info->chip_name; d.udma_mask = info->udma_mask; + /* fixup ->dma_ops for HPT370/HPT370A */ + if (info == &hpt370 || info == &hpt370a) + d.dma_ops = &hpt370_dma_ops; + pci_set_drvdata(dev, (void *)info); if (info == &hpt36x || info == &hpt374) diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index 5b5b0cc4b76a..9053c8771e6e 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -149,27 +149,17 @@ static u8 __devinit it8213_cable_detect(ide_hwif_t *hwif) return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } -/** - * init_hwif_it8213 - set up hwif structs - * @hwif: interface to set up - * - * We do the basic set up of the interface structure. - */ - -static void __devinit init_hwif_it8213(ide_hwif_t *hwif) -{ - hwif->set_dma_mode = &it8213_set_dma_mode; - hwif->set_pio_mode = &it8213_set_pio_mode; - - hwif->cable_detect = it8213_cable_detect; -} - +static const struct ide_port_ops it8213_port_ops = { + .set_pio_mode = it8213_set_pio_mode, + .set_dma_mode = it8213_set_dma_mode, + .cable_detect = it8213_cable_detect, +}; #define DECLARE_ITE_DEV(name_str) \ { \ .name = name_str, \ - .init_hwif = init_hwif_it8213, \ .enablebits = { {0x41, 0x80, 0x80} }, \ + .port_ops = &it8213_port_ops, \ .host_flags = IDE_HFLAG_SINGLE, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index a38ec47423a0..6ab04115286b 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -418,7 +418,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) } /** - * ata66_it821x - check for 80 pin cable + * it821x_cable_detect - cable detection * @hwif: interface to check * * Check for the presence of an ATA66 capable cable on the @@ -426,7 +426,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) * the needed logic onboard. */ -static u8 __devinit ata66_it821x(ide_hwif_t *hwif) +static u8 __devinit it821x_cable_detect(ide_hwif_t *hwif) { /* The reference driver also only does disk side */ return ATA_CBL_PATA80; @@ -511,6 +511,11 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive) } +static struct ide_dma_ops it821x_pass_through_dma_ops = { + .dma_start = it821x_dma_start, + .dma_end = it821x_dma_end, +}; + /** * init_hwif_it821x - set up hwif structs * @hwif: interface to set up @@ -527,8 +532,6 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) struct it821x_dev *idev = itdevs[hwif->channel]; u8 conf; - hwif->quirkproc = &it821x_quirkproc; - ide_set_hwifdata(hwif, idev); pci_read_config_byte(dev, 0x50, &conf); @@ -563,17 +566,11 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) } if (idev->smart == 0) { - hwif->set_pio_mode = &it821x_set_pio_mode; - hwif->set_dma_mode = &it821x_set_dma_mode; - /* MWDMA/PIO clock switching for pass through mode */ - hwif->dma_start = &it821x_dma_start; - hwif->ide_dma_end = &it821x_dma_end; + hwif->dma_ops = &it821x_pass_through_dma_ops; } else hwif->host_flags |= IDE_HFLAG_NO_SET_MODE; - hwif->cable_detect = ata66_it821x; - if (hwif->dma_base == 0) return; @@ -613,12 +610,20 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha return 0; } +static const struct ide_port_ops it821x_port_ops = { + /* it821x_set_{pio,dma}_mode() are only used in pass-through mode */ + .set_pio_mode = it821x_set_pio_mode, + .set_dma_mode = it821x_set_dma_mode, + .quirkproc = it821x_quirkproc, + .cable_detect = it821x_cable_detect, +}; #define DECLARE_ITE_DEV(name_str) \ { \ .name = name_str, \ .init_chipset = init_chipset_it821x, \ .init_hwif = init_hwif_it821x, \ + .port_ops = &it821x_port_ops, \ .pio_mask = ATA_PIO4, \ } diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index 673f7dc8ba65..96ef7394f283 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -19,13 +19,13 @@ typedef enum { } port_type; /** - * ata66_jmicron - Cable check + * jmicron_cable_detect - cable detection * @hwif: IDE port * * Returns the cable type. */ -static u8 __devinit ata66_jmicron(ide_hwif_t *hwif) +static u8 __devinit jmicron_cable_detect(ide_hwif_t *hwif) { struct pci_dev *pdev = to_pci_dev(hwif->dev); @@ -95,25 +95,16 @@ static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode) { } -/** - * init_hwif_jmicron - set up hwif structs - * @hwif: interface to set up - * - * Minimal set up is required for the Jmicron hardware. - */ - -static void __devinit init_hwif_jmicron(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &jmicron_set_pio_mode; - hwif->set_dma_mode = &jmicron_set_dma_mode; - - hwif->cable_detect = ata66_jmicron; -} +static const struct ide_port_ops jmicron_port_ops = { + .set_pio_mode = jmicron_set_pio_mode, + .set_dma_mode = jmicron_set_dma_mode, + .cable_detect = jmicron_cable_detect, +}; static const struct ide_port_info jmicron_chipset __devinitdata = { .name = "JMB", - .init_hwif = init_hwif_jmicron, .enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } }, + .port_ops = &jmicron_port_ops, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c index 3015d6916d4c..e1b0c9a9ab9c 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/pci/ns87415.c @@ -150,7 +150,7 @@ static void ns87415_selectproc (ide_drive_t *drive) ns87415_prepare_drive (drive, drive->using_dma); } -static int ns87415_ide_dma_end (ide_drive_t *drive) +static int ns87415_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 dma_stat = 0, dma_cmd = 0; @@ -170,7 +170,7 @@ static int ns87415_ide_dma_end (ide_drive_t *drive) return (dma_stat & 7) != 4; } -static int ns87415_ide_dma_setup(ide_drive_t *drive) +static int ns87415_dma_setup(ide_drive_t *drive) { /* select DMA xfer */ ns87415_prepare_drive(drive, 1); @@ -195,8 +195,6 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) u8 stat; #endif - hwif->selectproc = &ns87415_selectproc; - /* * We cannot probe for IRQ: both ports share common IRQ on INTA. * Also, leave IRQ masked during drive probing, to prevent infinite @@ -254,16 +252,31 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) return; outb(0x60, hwif->dma_status); - hwif->dma_setup = &ns87415_ide_dma_setup; - hwif->ide_dma_end = &ns87415_ide_dma_end; } +static const struct ide_port_ops ns87415_port_ops = { + .selectproc = ns87415_selectproc, +}; + +static const struct ide_dma_ops ns87415_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ns87415_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = ns87415_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + static const struct ide_port_info ns87415_chipset __devinitdata = { .name = "NS87415", #ifdef CONFIG_SUPERIO .init_iops = init_iops_ns87415, #endif .init_hwif = init_hwif_ns87415, + .port_ops = &ns87415_port_ops, + .dma_ops = &ns87415_dma_ops, .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | IDE_HFLAG_NO_ATAPI_DMA, }; diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 88a4dd94eeea..9edacba20ffb 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -326,28 +326,24 @@ static void __devinit opti621_port_init_devs(ide_hwif_t *hwif) hwif->drives[1].drive_data = PIO_DONT_KNOW; } -/* - * init_hwif_opti621() is called once for each hwif found at boot. - */ -static void __devinit init_hwif_opti621(ide_hwif_t *hwif) -{ - hwif->port_init_devs = opti621_port_init_devs; - hwif->set_pio_mode = &opti621_set_pio_mode; -} +static const struct ide_port_ops opti621_port_ops = { + .port_init_devs = opti621_port_init_devs, + .set_pio_mode = opti621_set_pio_mode, +}; static const struct ide_port_info opti621_chipsets[] __devinitdata = { { /* 0 */ .name = "OPTI621", - .init_hwif = init_hwif_opti621, .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .port_ops = &opti621_port_ops, .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, .pio_mask = ATA_PIO3, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, }, { /* 1 */ .name = "OPTI621X", - .init_hwif = init_hwif_opti621, .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .port_ops = &opti621_port_ops, .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, .pio_mask = ATA_PIO3, .swdma_mask = ATA_SWDMA2, diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 1c8cb7797a4a..ec9bd7b352fc 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -34,7 +34,7 @@ #undef DEBUG #ifdef DEBUG -#define DBG(fmt, args...) printk("%s: " fmt, __FUNCTION__, ## args) +#define DBG(fmt, args...) printk("%s: " fmt, __func__, ## args) #else #define DBG(fmt, args...) #endif @@ -442,17 +442,6 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha return dev->irq; } -static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &pdcnew_set_pio_mode; - hwif->set_dma_mode = &pdcnew_set_dma_mode; - - hwif->quirkproc = &pdcnew_quirkproc; - hwif->resetproc = &pdcnew_reset; - - hwif->cable_detect = pdcnew_cable_detect; -} - static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) { struct pci_dev *dev2; @@ -476,11 +465,19 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) return NULL; } +static const struct ide_port_ops pdcnew_port_ops = { + .set_pio_mode = pdcnew_set_pio_mode, + .set_dma_mode = pdcnew_set_dma_mode, + .quirkproc = pdcnew_quirkproc, + .resetproc = pdcnew_reset, + .cable_detect = pdcnew_cable_detect, +}; + #define DECLARE_PDCNEW_DEV(name_str, udma) \ { \ .name = name_str, \ .init_chipset = init_chipset_pdcnew, \ - .init_hwif = init_hwif_pdc202new, \ + .port_ops = &pdcnew_port_ops, \ .host_flags = IDE_HFLAG_POST_SET_MODE | \ IDE_HFLAG_ERROR_STOPS_FIFO | \ IDE_HFLAG_OFF_BOARD, \ diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 150422ec3cfa..fca89eda5c02 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -115,7 +115,7 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) pdc202xx_set_mode(drive, XFER_PIO_0 + pio); } -static u8 __devinit pdc2026x_old_cable_detect(ide_hwif_t *hwif) +static u8 __devinit pdc2026x_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10); @@ -163,7 +163,7 @@ static void pdc202xx_quirkproc(ide_drive_t *drive) drive->quirk_list = 0; } -static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) +static void pdc202xx_dma_start(ide_drive_t *drive) { if (drive->current_speed > XFER_UDMA_2) pdc_old_enable_66MHz_clock(drive->hwif); @@ -185,7 +185,7 @@ static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) ide_dma_start(drive); } -static int pdc202xx_old_ide_dma_end(ide_drive_t *drive) +static int pdc202xx_dma_end(ide_drive_t *drive) { if (drive->media != ide_disk || drive->addressing == 1) { ide_hwif_t *hwif = HWIF(drive); @@ -202,7 +202,7 @@ static int pdc202xx_old_ide_dma_end(ide_drive_t *drive) return __ide_dma_end(drive); } -static int pdc202xx_old_ide_dma_test_irq(ide_drive_t *drive) +static int pdc202xx_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long high_16 = hwif->extra_base - 16; @@ -226,26 +226,6 @@ somebody_else: return (dma_stat & 4) == 4; /* return 1 if INTR asserted */ } -static void pdc202xx_dma_lost_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - - if (hwif->resetproc != NULL) - hwif->resetproc(drive); - - ide_dma_lost_irq(drive); -} - -static void pdc202xx_dma_timeout(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - - if (hwif->resetproc != NULL) - hwif->resetproc(drive); - - ide_dma_timeout(drive); -} - static void pdc202xx_reset_host (ide_hwif_t *hwif) { unsigned long high_16 = hwif->extra_base - 16; @@ -271,68 +251,46 @@ static void pdc202xx_reset (ide_drive_t *drive) ide_set_max_pio(drive); } -static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev, - const char *name) +static void pdc202xx_dma_lost_irq(ide_drive_t *drive) { - return dev->irq; + pdc202xx_reset(drive); + ide_dma_lost_irq(drive); } -static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) +static void pdc202xx_dma_timeout(ide_drive_t *drive) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->set_pio_mode = &pdc202xx_set_pio_mode; - hwif->set_dma_mode = &pdc202xx_set_mode; - - hwif->quirkproc = &pdc202xx_quirkproc; - - if (dev->device != PCI_DEVICE_ID_PROMISE_20246) { - hwif->resetproc = &pdc202xx_reset; - - hwif->cable_detect = pdc2026x_old_cable_detect; - } - - if (hwif->dma_base == 0) - return; - - hwif->dma_lost_irq = &pdc202xx_dma_lost_irq; - hwif->dma_timeout = &pdc202xx_dma_timeout; - - if (dev->device != PCI_DEVICE_ID_PROMISE_20246) { - hwif->dma_start = &pdc202xx_old_ide_dma_start; - hwif->ide_dma_end = &pdc202xx_old_ide_dma_end; - } - hwif->ide_dma_test_irq = &pdc202xx_old_ide_dma_test_irq; + pdc202xx_reset(drive); + ide_dma_timeout(drive); } -static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase) +static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev, + const char *name) { + unsigned long dmabase = pci_resource_start(dev, 4); u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0; - if (hwif->channel) { - ide_setup_dma(hwif, dmabase); - return; - } + if (dmabase == 0) + goto out; udma_speed_flag = inb(dmabase | 0x1f); primary_mode = inb(dmabase | 0x1a); secondary_mode = inb(dmabase | 0x1b); printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \ "Primary %s Mode " \ - "Secondary %s Mode.\n", hwif->cds->name, + "Secondary %s Mode.\n", pci_name(dev), (udma_speed_flag & 1) ? "EN" : "DIS", (primary_mode & 1) ? "MASTER" : "PCI", (secondary_mode & 1) ? "MASTER" : "PCI" ); if (!(udma_speed_flag & 1)) { printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ", - hwif->cds->name, udma_speed_flag, + pci_name(dev), udma_speed_flag, (udma_speed_flag|1)); outb(udma_speed_flag | 1, dmabase | 0x1f); printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN"); } - - ide_setup_dma(hwif, dmabase); +out: + return dev->irq; } static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, @@ -357,13 +315,48 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, IDE_HFLAG_ABUSE_SET_DMA_MODE | \ IDE_HFLAG_OFF_BOARD) +static const struct ide_port_ops pdc20246_port_ops = { + .set_pio_mode = pdc202xx_set_pio_mode, + .set_dma_mode = pdc202xx_set_mode, + .quirkproc = pdc202xx_quirkproc, +}; + +static const struct ide_port_ops pdc2026x_port_ops = { + .set_pio_mode = pdc202xx_set_pio_mode, + .set_dma_mode = pdc202xx_set_mode, + .quirkproc = pdc202xx_quirkproc, + .resetproc = pdc202xx_reset, + .cable_detect = pdc2026x_cable_detect, +}; + +static const struct ide_dma_ops pdc20246_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = pdc202xx_dma_test_irq, + .dma_lost_irq = pdc202xx_dma_lost_irq, + .dma_timeout = pdc202xx_dma_timeout, +}; + +static const struct ide_dma_ops pdc2026x_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = pdc202xx_dma_start, + .dma_end = pdc202xx_dma_end, + .dma_test_irq = pdc202xx_dma_test_irq, + .dma_lost_irq = pdc202xx_dma_lost_irq, + .dma_timeout = pdc202xx_dma_timeout, +}; + #define DECLARE_PDC2026X_DEV(name_str, udma, extra_flags) \ { \ .name = name_str, \ .init_chipset = init_chipset_pdc202xx, \ - .init_hwif = init_hwif_pdc202xx, \ - .init_dma = init_dma_pdc202xx, \ - .extra = 48, \ + .port_ops = &pdc2026x_port_ops, \ + .dma_ops = &pdc2026x_dma_ops, \ .host_flags = IDE_HFLAGS_PDC202XX | extra_flags, \ .pio_mask = ATA_PIO4, \ .mwdma_mask = ATA_MWDMA2, \ @@ -374,9 +367,8 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = { { /* 0 */ .name = "PDC20246", .init_chipset = init_chipset_pdc202xx, - .init_hwif = init_hwif_pdc202xx, - .init_dma = init_dma_pdc202xx, - .extra = 16, + .port_ops = &pdc20246_port_ops, + .dma_ops = &pdc20246_dma_ops, .host_flags = IDE_HFLAGS_PDC202XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 89d74ffdb207..21c5dd23f928 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -285,11 +285,6 @@ static u8 __devinit piix_cable_detect(ide_hwif_t *hwif) static void __devinit init_hwif_piix(ide_hwif_t *hwif) { - hwif->set_pio_mode = &piix_set_pio_mode; - hwif->set_dma_mode = &piix_set_dma_mode; - - hwif->cable_detect = piix_cable_detect; - if (!hwif->dma_base) return; @@ -306,6 +301,12 @@ static void __devinit init_hwif_ich(ide_hwif_t *hwif) hwif->ide_dma_clear_irq = &piix_dma_clear_irq; } +static const struct ide_port_ops piix_port_ops = { + .set_pio_mode = piix_set_pio_mode, + .set_dma_mode = piix_set_dma_mode, + .cable_detect = piix_cable_detect, +}; + #ifndef CONFIG_IA64 #define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS #else @@ -317,6 +318,7 @@ static void __devinit init_hwif_ich(ide_hwif_t *hwif) .name = name_str, \ .init_hwif = init_hwif_piix, \ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ + .port_ops = &piix_port_ops, \ .host_flags = IDE_HFLAGS_PIIX, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ @@ -330,6 +332,7 @@ static void __devinit init_hwif_ich(ide_hwif_t *hwif) .init_chipset = init_chipset_ich, \ .init_hwif = init_hwif_ich, \ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ + .port_ops = &piix_port_ops, \ .host_flags = IDE_HFLAGS_PIIX, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index 44985c8f36e7..14c787b5d95f 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -165,7 +165,7 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) * * returns 1 on error, 0 otherwise */ -static int sc1200_ide_dma_end (ide_drive_t *drive) +static int sc1200_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long dma_base = hwif->dma_base; @@ -214,7 +214,7 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) printk("SC1200: %s: changing (U)DMA mode\n", drive->name); ide_dma_off_quietly(drive); if (ide_set_dma_mode(drive, mode) == 0 && drive->using_dma) - hwif->dma_host_set(drive, 1); + hwif->dma_ops->dma_host_set(drive, 1); return; } @@ -286,25 +286,27 @@ static int sc1200_resume (struct pci_dev *dev) } #endif -/* - * This gets invoked by the IDE driver once for each channel, - * and performs channel-specific pre-initialization before drive probing. - */ -static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &sc1200_set_pio_mode; - hwif->set_dma_mode = &sc1200_set_dma_mode; - - if (hwif->dma_base == 0) - return; +static const struct ide_port_ops sc1200_port_ops = { + .set_pio_mode = sc1200_set_pio_mode, + .set_dma_mode = sc1200_set_dma_mode, + .udma_filter = sc1200_udma_filter, +}; - hwif->udma_filter = sc1200_udma_filter; - hwif->ide_dma_end = &sc1200_ide_dma_end; -} +static const struct ide_dma_ops sc1200_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = sc1200_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; static const struct ide_port_info sc1200_chipset __devinitdata = { .name = "SC1200", - .init_hwif = init_hwif_sc1200, + .port_ops = &sc1200_port_ops, + .dma_ops = &sc1200_dma_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_POST_SET_MODE | IDE_HFLAG_ABUSE_DMA_MODES, diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 52145796f12f..17cf86490d59 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -317,14 +317,14 @@ static int scc_dma_setup(ide_drive_t *drive) /** - * scc_ide_dma_end - Stop DMA + * scc_dma_end - Stop DMA * @drive: IDE drive * * Check and clear INT Status register. * Then call __ide_dma_end(). */ -static int scc_ide_dma_end(ide_drive_t * drive) +static int scc_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long intsts_port = hwif->dma_base + 0x014; @@ -449,7 +449,7 @@ static int scc_dma_test_irq(ide_drive_t *drive) if (!drive->waiting_for_dma) printk(KERN_WARNING "%s: (%s) called while not waiting\n", - drive->name, __FUNCTION__); + drive->name, __func__); return 0; } @@ -483,7 +483,7 @@ static int setup_mmio_scc (struct pci_dev *dev, const char *name) unsigned long dma_size = pci_resource_len(dev, 1); void __iomem *ctl_addr; void __iomem *dma_addr; - int i; + int i, ret; for (i = 0; i < MAX_HWIFS; i++) { if (scc_ports[i].ctl == 0) @@ -492,21 +492,17 @@ static int setup_mmio_scc (struct pci_dev *dev, const char *name) if (i >= MAX_HWIFS) return -ENOMEM; - if (!request_mem_region(ctl_base, ctl_size, name)) { - printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME); - goto fail_0; - } - - if (!request_mem_region(dma_base, dma_size, name)) { - printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME); - goto fail_1; + ret = pci_request_selected_regions(dev, (1 << 2) - 1, name); + if (ret < 0) { + printk(KERN_ERR "%s: can't reserve resources\n", name); + return ret; } if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL) - goto fail_2; + goto fail_0; if ((dma_addr = ioremap(dma_base, dma_size)) == NULL) - goto fail_3; + goto fail_1; pci_set_master(dev); scc_ports[i].ctl = (unsigned long)ctl_addr; @@ -515,12 +511,8 @@ static int setup_mmio_scc (struct pci_dev *dev, const char *name) return 1; - fail_3: - iounmap(ctl_addr); - fail_2: - release_mem_region(dma_base, dma_size); fail_1: - release_mem_region(ctl_base, ctl_size); + iounmap(ctl_addr); fail_0: return -ENOMEM; } @@ -549,7 +541,6 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, hw.chipset = ide_pci; ide_init_port_hw(hwif, &hw); hwif->dev = &dev->dev; - hwif->cds = d; idx[0] = hwif->index; @@ -701,26 +692,37 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) /* PTERADD */ out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); - hwif->dma_setup = scc_dma_setup; - hwif->ide_dma_end = scc_ide_dma_end; - hwif->set_pio_mode = scc_set_pio_mode; - hwif->set_dma_mode = scc_set_dma_mode; - hwif->ide_dma_test_irq = scc_dma_test_irq; - hwif->udma_filter = scc_udma_filter; - if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) hwif->ultra_mask = ATA_UDMA6; /* 133MHz */ else hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ - - hwif->cable_detect = scc_cable_detect; } +static const struct ide_port_ops scc_port_ops = { + .set_pio_mode = scc_set_pio_mode, + .set_dma_mode = scc_set_dma_mode, + .udma_filter = scc_udma_filter, + .cable_detect = scc_cable_detect, +}; + +static const struct ide_dma_ops scc_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = scc_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = scc_dma_end, + .dma_test_irq = scc_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + #define DECLARE_SCC_DEV(name_str) \ { \ .name = name_str, \ .init_iops = init_iops_scc, \ .init_hwif = init_hwif_scc, \ + .port_ops = &scc_port_ops, \ + .dma_ops = &scc_dma_ops, \ .host_flags = IDE_HFLAG_SINGLE, \ .pio_mask = ATA_PIO4, \ } @@ -754,10 +756,6 @@ static void __devexit scc_remove(struct pci_dev *dev) { struct scc_ports *ports = pci_get_drvdata(dev); ide_hwif_t *hwif = ports->hwif; - unsigned long ctl_base = pci_resource_start(dev, 0); - unsigned long dma_base = pci_resource_start(dev, 1); - unsigned long ctl_size = pci_resource_len(dev, 0); - unsigned long dma_size = pci_resource_len(dev, 1); if (hwif->dmatable_cpu) { pci_free_consistent(dev, PRD_ENTRIES * PRD_BYTES, @@ -770,8 +768,7 @@ static void __devexit scc_remove(struct pci_dev *dev) hwif->chipset = ide_unknown; iounmap((void*)ports->dma); iounmap((void*)ports->ctl); - release_mem_region(dma_base, dma_size); - release_mem_region(ctl_base, ctl_size); + pci_release_selected_regions(dev, (1 << 2) - 1); memset(ports, 0, sizeof(*ports)); } diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index cfe927469793..a1fb20826a5b 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -312,7 +312,7 @@ static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif) return ATA_CBL_PATA40; } -static u8 __devinit ata66_svwks(ide_hwif_t *hwif) +static u8 __devinit svwks_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -336,17 +336,18 @@ static u8 __devinit ata66_svwks(ide_hwif_t *hwif) return ATA_CBL_PATA40; } -static void __devinit init_hwif_svwks (ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->set_pio_mode = &svwks_set_pio_mode; - hwif->set_dma_mode = &svwks_set_dma_mode; - hwif->udma_filter = &svwks_udma_filter; +static const struct ide_port_ops osb4_port_ops = { + .set_pio_mode = svwks_set_pio_mode, + .set_dma_mode = svwks_set_dma_mode, + .udma_filter = svwks_udma_filter, +}; - if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) - hwif->cable_detect = ata66_svwks; -} +static const struct ide_port_ops svwks_port_ops = { + .set_pio_mode = svwks_set_pio_mode, + .set_dma_mode = svwks_set_dma_mode, + .udma_filter = svwks_udma_filter, + .cable_detect = svwks_cable_detect, +}; #define IDE_HFLAGS_SVWKS \ (IDE_HFLAG_LEGACY_IRQS | \ @@ -356,7 +357,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { { /* 0 */ .name = "SvrWks OSB4", .init_chipset = init_chipset_svwks, - .init_hwif = init_hwif_svwks, + .port_ops = &osb4_port_ops, .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -364,7 +365,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { },{ /* 1 */ .name = "SvrWks CSB5", .init_chipset = init_chipset_svwks, - .init_hwif = init_hwif_svwks, + .port_ops = &svwks_port_ops, .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -372,7 +373,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { },{ /* 2 */ .name = "SvrWks CSB6", .init_chipset = init_chipset_svwks, - .init_hwif = init_hwif_svwks, + .port_ops = &svwks_port_ops, .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -380,7 +381,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { },{ /* 3 */ .name = "SvrWks CSB6", .init_chipset = init_chipset_svwks, - .init_hwif = init_hwif_svwks, + .port_ops = &svwks_port_ops, .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -388,7 +389,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { },{ /* 4 */ .name = "SvrWks HT1000", .init_chipset = init_chipset_svwks, - .init_hwif = init_hwif_svwks, + .port_ops = &svwks_port_ops, .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 6bd9523cf642..321a4e28ac19 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -170,10 +170,10 @@ sgiioc4_clearirq(ide_drive_t * drive) printk(KERN_ERR "%s(%s) : PCI Bus Error when doing DMA:" " status-cmd reg is 0x%x\n", - __FUNCTION__, drive->name, pci_stat_cmd_reg); + __func__, drive->name, pci_stat_cmd_reg); printk(KERN_ERR "%s(%s) : PCI Error Address is 0x%x%x\n", - __FUNCTION__, drive->name, + __func__, drive->name, pci_err_addr_high, pci_err_addr_low); /* Clear the PCI Error indicator */ pci_write_config_dword(dev, PCI_COMMAND, 0x00000146); @@ -188,7 +188,7 @@ sgiioc4_clearirq(ide_drive_t * drive) return intr_reg & 3; } -static void sgiioc4_ide_dma_start(ide_drive_t * drive) +static void sgiioc4_dma_start(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4; @@ -215,8 +215,7 @@ sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base) } /* Stops the IOC4 DMA Engine */ -static int -sgiioc4_ide_dma_end(ide_drive_t * drive) +static int sgiioc4_dma_end(ide_drive_t *drive) { u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0; ide_hwif_t *hwif = HWIF(drive); @@ -232,7 +231,7 @@ sgiioc4_ide_dma_end(ide_drive_t * drive) printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is still 1 :" "ioc4_dma_reg 0x%x\n", - __FUNCTION__, drive->name, ioc4_dma); + __func__, drive->name, ioc4_dma); dma_stat = 1; } @@ -251,7 +250,7 @@ sgiioc4_ide_dma_end(ide_drive_t * drive) udelay(1); } if (!valid) { - printk(KERN_ERR "%s(%s) : DMA incomplete\n", __FUNCTION__, + printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__, drive->name); dma_stat = 1; } @@ -264,7 +263,7 @@ sgiioc4_ide_dma_end(ide_drive_t * drive) printk(KERN_ERR "%s(%s): WARNING!! byte_count_dev %d " "!= byte_count_mem %d\n", - __FUNCTION__, drive->name, bc_dev, bc_mem); + __func__, drive->name, bc_dev, bc_mem); } } @@ -279,8 +278,7 @@ static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed) } /* returns 1 if dma irq issued, 0 otherwise */ -static int -sgiioc4_ide_dma_test_irq(ide_drive_t * drive) +static int sgiioc4_dma_test_irq(ide_drive_t *drive) { return sgiioc4_checkirq(HWIF(drive)); } @@ -294,7 +292,7 @@ static void sgiioc4_dma_host_set(ide_drive_t *drive, int on) static void sgiioc4_resetproc(ide_drive_t * drive) { - sgiioc4_ide_dma_end(drive); + sgiioc4_dma_end(drive); sgiioc4_clearirq(drive); } @@ -329,13 +327,17 @@ sgiioc4_INB(unsigned long port) /* Creates a dma map for the scatter-gather list entries */ static int __devinit -ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) +ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; void __iomem *virt_dma_base; int num_ports = sizeof (ioc4_dma_regs_t); void *pad; + if (dma_base == 0) + return -1; + printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name, dma_base, dma_base + num_ports - 1); @@ -343,7 +345,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) printk(KERN_ERR "%s(%s) -- ERROR, Addresses 0x%p to 0x%p " "ALREADY in use\n", - __FUNCTION__, hwif->name, (void *) dma_base, + __func__, hwif->name, (void *) dma_base, (void *) dma_base + num_ports - 1); return -1; } @@ -352,7 +354,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) if (virt_dma_base == NULL) { printk(KERN_ERR "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n", - __FUNCTION__, hwif->name, dma_base, dma_base + num_ports - 1); + __func__, hwif->name, dma_base, dma_base + num_ports - 1); goto dma_remap_failure; } hwif->dma_base = (unsigned long) virt_dma_base; @@ -378,7 +380,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) hwif->dmatable_cpu, hwif->dmatable_dma); printk(KERN_INFO "%s() -- Error! Unable to allocate DMA Maps for drive %s\n", - __FUNCTION__, hwif->name); + __func__, hwif->name); printk(KERN_INFO "Changing from DMA to PIO mode for Drive %s\n", hwif->name); @@ -406,14 +408,14 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) if (ioc4_dma & IOC4_S_DMA_ACTIVE) { printk(KERN_WARNING "%s(%s):Warning!! DMA from previous transfer was still active\n", - __FUNCTION__, drive->name); + __func__, drive->name); writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); if (ioc4_dma & IOC4_S_DMA_STOP) printk(KERN_ERR "%s(%s) : IOC4 Dma STOP bit is still 1\n", - __FUNCTION__, drive->name); + __func__, drive->name); } ioc4_dma = readl((void __iomem *)ioc4_dma_addr); @@ -421,14 +423,14 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) printk(KERN_WARNING "%s(%s) : Warning!! - DMA Error during Previous" " transfer | status 0x%x\n", - __FUNCTION__, drive->name, ioc4_dma); + __func__, drive->name, ioc4_dma); writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); if (ioc4_dma & IOC4_S_DMA_STOP) printk(KERN_ERR "%s(%s) : IOC4 DMA STOP bit is still 1\n", - __FUNCTION__, drive->name); + __func__, drive->name); } /* Address of the Scatter Gather List */ @@ -519,7 +521,7 @@ use_pio_instead: return 0; /* revert to PIO for this request */ } -static int sgiioc4_ide_dma_setup(ide_drive_t *drive) +static int sgiioc4_dma_setup(ide_drive_t *drive) { struct request *rq = HWGROUP(drive)->rq; unsigned int count = 0; @@ -548,45 +550,37 @@ static int sgiioc4_ide_dma_setup(ide_drive_t *drive) return 0; } -static void __devinit -ide_init_sgiioc4(ide_hwif_t * hwif) -{ - hwif->mmio = 1; - hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */ - hwif->set_dma_mode = &sgiioc4_set_dma_mode; - hwif->selectproc = NULL;/* Use the default routine to select drive */ - hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */ - hwif->pre_reset = NULL; /* No HBA specific pre_set needed */ - hwif->resetproc = &sgiioc4_resetproc;/* Reset DMA engine, - clear interrupts */ - hwif->maskproc = &sgiioc4_maskproc; /* Mask on/off NIEN register */ - hwif->quirkproc = NULL; - - hwif->INB = &sgiioc4_INB; - - if (hwif->dma_base == 0) - return; +static const struct ide_port_ops sgiioc4_port_ops = { + .set_dma_mode = sgiioc4_set_dma_mode, + /* reset DMA engine, clear IRQs */ + .resetproc = sgiioc4_resetproc, + /* mask on/off NIEN register */ + .maskproc = sgiioc4_maskproc, +}; - hwif->dma_host_set = &sgiioc4_dma_host_set; - hwif->dma_setup = &sgiioc4_ide_dma_setup; - hwif->dma_start = &sgiioc4_ide_dma_start; - hwif->ide_dma_end = &sgiioc4_ide_dma_end; - hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq; - hwif->dma_lost_irq = &sgiioc4_dma_lost_irq; - hwif->dma_timeout = &ide_dma_timeout; -} +static const struct ide_dma_ops sgiioc4_dma_ops = { + .dma_host_set = sgiioc4_dma_host_set, + .dma_setup = sgiioc4_dma_setup, + .dma_start = sgiioc4_dma_start, + .dma_end = sgiioc4_dma_end, + .dma_test_irq = sgiioc4_dma_test_irq, + .dma_lost_irq = sgiioc4_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; static const struct ide_port_info sgiioc4_port_info __devinitdata = { .chipset = ide_pci, - .host_flags = IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ - IDE_HFLAG_NO_AUTOTUNE, + .init_dma = ide_dma_sgiioc4, + .port_ops = &sgiioc4_port_ops, + .dma_ops = &sgiioc4_dma_ops, + .host_flags = IDE_HFLAG_NO_AUTOTUNE, .mwdma_mask = ATA_MWDMA2_ONLY, }; static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev) { - unsigned long cmd_base, dma_base, irqport; + unsigned long cmd_base, irqport; unsigned long bar0, cmd_phys_base, ctl; void __iomem *virt_base; ide_hwif_t *hwif; @@ -612,7 +606,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET; ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET; irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET; - dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; cmd_phys_base = bar0 + IOC4_CMD_OFFSET; if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, @@ -620,7 +613,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) printk(KERN_ERR "%s : %s -- ERROR, Addresses " "0x%p to 0x%p ALREADY in use\n", - __FUNCTION__, hwif->name, (void *) cmd_phys_base, + __func__, hwif->name, (void *) cmd_phys_base, (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); return -ENOMEM; } @@ -641,13 +634,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) /* Initializing chipset IRQ Registers */ writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4)); - if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base)) { - printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n", - hwif->name, DRV_NAME); - d.mwdma_mask = 0; - } - - ide_init_sgiioc4(hwif); + hwif->INB = &sgiioc4_INB; idx[0] = hwif->index; diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index c9ecab8aeb61..1fffea3211bd 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -301,7 +301,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) } /* returns 1 if dma irq issued, 0 otherwise */ -static int siimage_io_ide_dma_test_irq (ide_drive_t *drive) +static int siimage_io_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -320,14 +320,14 @@ static int siimage_io_ide_dma_test_irq (ide_drive_t *drive) } /** - * siimage_mmio_ide_dma_test_irq - check we caused an IRQ + * siimage_mmio_dma_test_irq - check we caused an IRQ * @drive: drive we are testing * * Check if we caused an IDE DMA interrupt. We may also have caused * SATA status interrupts, if so we clean them up and continue. */ - -static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) + +static int siimage_mmio_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long addr = siimage_selreg(hwif, 0x1); @@ -347,7 +347,7 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) printk(KERN_WARNING "%s: sata_error = 0x%08x, " "watchdog = %d, %s\n", drive->name, sata_error, watchdog, - __FUNCTION__); + __func__); } else { watchdog = (ext_stat & 0x8000) ? 1 : 0; @@ -369,6 +369,14 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) return 0; } +static int siimage_dma_test_irq(ide_drive_t *drive) +{ + if (drive->hwif->mmio) + return siimage_mmio_dma_test_irq(drive); + else + return siimage_io_dma_test_irq(drive); +} + /** * sil_sata_reset_poll - wait for SATA reset * @drive: drive we are resetting @@ -735,14 +743,14 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif) } /** - * ata66_siimage - check for 80 pin cable + * sil_cable_detect - cable detection * @hwif: interface to check * * Check for the presence of an ATA66 capable cable on the * interface. */ -static u8 __devinit ata66_siimage(ide_hwif_t *hwif) +static u8 __devinit sil_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long addr = siimage_selreg(hwif, 0); @@ -756,67 +764,44 @@ static u8 __devinit ata66_siimage(ide_hwif_t *hwif) return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } -/** - * init_hwif_siimage - set up hwif structs - * @hwif: interface to set up - * - * We do the basic set up of the interface structure. The SIIMAGE - * requires several custom handlers so we override the default - * ide DMA handlers appropriately - */ - -static void __devinit init_hwif_siimage(ide_hwif_t *hwif) -{ - u8 sata = is_sata(hwif); - - hwif->set_pio_mode = &sil_set_pio_mode; - hwif->set_dma_mode = &sil_set_dma_mode; - hwif->quirkproc = &sil_quirkproc; - - if (sata) { - static int first = 1; - - hwif->reset_poll = &sil_sata_reset_poll; - hwif->pre_reset = &sil_sata_pre_reset; - hwif->udma_filter = &sil_sata_udma_filter; - - if (first) { - printk(KERN_INFO "siimage: For full SATA support you should use the libata sata_sil module.\n"); - first = 0; - } - } else - hwif->udma_filter = &sil_pata_udma_filter; - - hwif->cable_detect = ata66_siimage; - - if (hwif->dma_base == 0) - return; +static const struct ide_port_ops sil_pata_port_ops = { + .set_pio_mode = sil_set_pio_mode, + .set_dma_mode = sil_set_dma_mode, + .quirkproc = sil_quirkproc, + .udma_filter = sil_pata_udma_filter, + .cable_detect = sil_cable_detect, +}; - if (sata) - hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; +static const struct ide_port_ops sil_sata_port_ops = { + .set_pio_mode = sil_set_pio_mode, + .set_dma_mode = sil_set_dma_mode, + .reset_poll = sil_sata_reset_poll, + .pre_reset = sil_sata_pre_reset, + .quirkproc = sil_quirkproc, + .udma_filter = sil_sata_udma_filter, + .cable_detect = sil_cable_detect, +}; - if (hwif->mmio) { - hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq; - } else { - hwif->ide_dma_test_irq = & siimage_io_ide_dma_test_irq; - } -} +static struct ide_dma_ops sil_dma_ops = { + .dma_test_irq = siimage_dma_test_irq, +}; -#define DECLARE_SII_DEV(name_str) \ +#define DECLARE_SII_DEV(name_str, p_ops) \ { \ .name = name_str, \ .init_chipset = init_chipset_siimage, \ .init_iops = init_iops_siimage, \ - .init_hwif = init_hwif_siimage, \ + .port_ops = p_ops, \ + .dma_ops = &sil_dma_ops, \ .pio_mask = ATA_PIO4, \ .mwdma_mask = ATA_MWDMA2, \ .udma_mask = ATA_UDMA6, \ } static const struct ide_port_info siimage_chipsets[] __devinitdata = { - /* 0 */ DECLARE_SII_DEV("SiI680"), - /* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA"), - /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA") + /* 0 */ DECLARE_SII_DEV("SiI680", &sil_pata_port_ops), + /* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA", &sil_sata_port_ops), + /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA", &sil_sata_port_ops) }; /** @@ -830,7 +815,24 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = { static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &siimage_chipsets[id->driver_data]); + struct ide_port_info d; + u8 idx = id->driver_data; + + d = siimage_chipsets[idx]; + + if (idx) { + static int first = 1; + + if (first) { + printk(KERN_INFO "siimage: For full SATA support you " + "should use the libata sata_sil module.\n"); + first = 0; + } + + d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA; + } + + return ide_setup_pci_device(dev, &d); } static const struct pci_device_id siimage_pci_tbl[] = { diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 181b647e5ca9..4b0b85d8faf5 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -347,7 +347,7 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) sis_program_timings(drive, speed); } -static u8 sis5513_ata133_udma_filter(ide_drive_t *drive) +static u8 sis_ata133_udma_filter(ide_drive_t *drive) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); u32 regdw = 0; @@ -514,7 +514,7 @@ static const struct sis_laptop sis_laptop[] = { { 0, } }; -static u8 __devinit ata66_sis5513(ide_hwif_t *hwif) +static u8 __devinit sis_cable_detect(ide_hwif_t *hwif) { struct pci_dev *pdev = to_pci_dev(hwif->dev); const struct sis_laptop *lap = &sis_laptop[0]; @@ -543,21 +543,22 @@ static u8 __devinit ata66_sis5513(ide_hwif_t *hwif) return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } -static void __devinit init_hwif_sis5513(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &sis_set_pio_mode; - hwif->set_dma_mode = &sis_set_dma_mode; - - if (chipset_family >= ATA_133) - hwif->udma_filter = sis5513_ata133_udma_filter; +static const struct ide_port_ops sis_port_ops = { + .set_pio_mode = sis_set_pio_mode, + .set_dma_mode = sis_set_dma_mode, + .cable_detect = sis_cable_detect, +}; - hwif->cable_detect = ata66_sis5513; -} +static const struct ide_port_ops sis_ata133_port_ops = { + .set_pio_mode = sis_set_pio_mode, + .set_dma_mode = sis_set_dma_mode, + .udma_filter = sis_ata133_udma_filter, + .cable_detect = sis_cable_detect, +}; static const struct ide_port_info sis5513_chipset __devinitdata = { .name = "SIS5513", .init_chipset = init_chipset_sis5513, - .init_hwif = init_hwif_sis5513, .enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} }, .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA, .pio_mask = ATA_PIO4, @@ -572,6 +573,11 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi if (sis_find_family(dev) == 0) return -ENOTSUPP; + if (chipset_family >= ATA_133) + d.port_ops = &sis_ata133_port_ops; + else + d.port_ops = &sis_port_ops; + d.udma_mask = udma_rates[chipset_family]; return ide_setup_pci_device(dev, &d); diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 40b3eeb2d847..ce84fa045d39 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -179,7 +179,7 @@ static void sl82c105_dma_start(ide_drive_t *drive) struct pci_dev *dev = to_pci_dev(hwif->dev); int reg = 0x44 + drive->dn * 4; - DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name)); + DBG(("%s(drive:%s)\n", __func__, drive->name)); pci_write_config_word(dev, reg, drive->drive_data >> 16); @@ -203,7 +203,7 @@ static int sl82c105_dma_end(ide_drive_t *drive) int reg = 0x44 + drive->dn * 4; int ret; - DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name)); + DBG(("%s(drive:%s)\n", __func__, drive->name)); ret = __ide_dma_end(drive); @@ -232,7 +232,7 @@ static void sl82c105_resetproc(ide_drive_t *drive) * Return the revision of the Winbond bridge * which this function is part of. */ -static unsigned int sl82c105_bridge_revision(struct pci_dev *dev) +static u8 sl82c105_bridge_revision(struct pci_dev *dev) { struct pci_dev *bridge; @@ -282,63 +282,59 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c return dev->irq; } -/* - * Initialise IDE channel - */ -static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned int rev; - - DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); - - hwif->set_pio_mode = &sl82c105_set_pio_mode; - hwif->set_dma_mode = &sl82c105_set_dma_mode; - hwif->resetproc = &sl82c105_resetproc; - - if (!hwif->dma_base) - return; - - rev = sl82c105_bridge_revision(dev); - if (rev <= 5) { - /* - * Never ever EVER under any circumstances enable - * DMA when the bridge is this old. - */ - printk(" %s: Winbond W83C553 bridge revision %d, " - "BM-DMA disabled\n", hwif->name, rev); - return; - } - - hwif->mwdma_mask = ATA_MWDMA2; - - hwif->dma_lost_irq = &sl82c105_dma_lost_irq; - hwif->dma_start = &sl82c105_dma_start; - hwif->ide_dma_end = &sl82c105_dma_end; - hwif->dma_timeout = &sl82c105_dma_timeout; +static const struct ide_port_ops sl82c105_port_ops = { + .set_pio_mode = sl82c105_set_pio_mode, + .set_dma_mode = sl82c105_set_dma_mode, + .resetproc = sl82c105_resetproc, +}; - if (hwif->mate) - hwif->serialized = hwif->mate->serialized = 1; -} +static const struct ide_dma_ops sl82c105_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = sl82c105_dma_start, + .dma_end = sl82c105_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = sl82c105_dma_lost_irq, + .dma_timeout = sl82c105_dma_timeout, +}; static const struct ide_port_info sl82c105_chipset __devinitdata = { .name = "W82C105", .init_chipset = init_chipset_sl82c105, - .init_hwif = init_hwif_sl82c105, .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}}, + .port_ops = &sl82c105_port_ops, + .dma_ops = &sl82c105_dma_ops, .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS | /* FIXME: check for Compatibility mode in generic IDE PCI code */ #if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT) IDE_HFLAG_FORCE_LEGACY_IRQS | #endif + IDE_HFLAG_SERIALIZE_DMA | IDE_HFLAG_NO_AUTODMA, .pio_mask = ATA_PIO5, + .mwdma_mask = ATA_MWDMA2, }; static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &sl82c105_chipset); + struct ide_port_info d = sl82c105_chipset; + u8 rev = sl82c105_bridge_revision(dev); + + if (rev <= 5) { + /* + * Never ever EVER under any circumstances enable + * DMA when the bridge is this old. + */ + printk(KERN_INFO "W82C105_IDE: Winbond W83C553 bridge " + "revision %d, BM-DMA disabled\n", rev); + d.dma_ops = NULL; + d.mwdma_mask = 0; + d.host_flags &= ~IDE_HFLAG_SERIALIZE_DMA; + } + + return ide_setup_pci_device(dev, &d); } static const struct pci_device_id sl82c105_pci_tbl[] = { diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index eab557c45d1b..dae6e2c94d86 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -125,18 +125,16 @@ static u8 __devinit slc90e66_cable_detect(ide_hwif_t *hwif) return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } -static void __devinit init_hwif_slc90e66(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &slc90e66_set_pio_mode; - hwif->set_dma_mode = &slc90e66_set_dma_mode; - - hwif->cable_detect = slc90e66_cable_detect; -} +static const struct ide_port_ops slc90e66_port_ops = { + .set_pio_mode = slc90e66_set_pio_mode, + .set_dma_mode = slc90e66_set_dma_mode, + .cable_detect = slc90e66_cable_detect, +}; static const struct ide_port_info slc90e66_chipset __devinitdata = { .name = "SLC90E66", - .init_hwif = init_hwif_slc90e66, .enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} }, + .port_ops = &slc90e66_port_ops, .host_flags = IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2_ONLY, diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index c15435182e3c..9b4b27a4c711 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c @@ -157,11 +157,6 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) /* Store the system control register base for convenience... */ hwif->config_data = sc_base; - hwif->set_pio_mode = &tc86c001_set_pio_mode; - hwif->set_dma_mode = &tc86c001_set_mode; - - hwif->cable_detect = tc86c001_cable_detect; - if (!hwif->dma_base) return; @@ -173,8 +168,6 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) /* Sector Count Register limit */ hwif->rqsize = 0xffff; - - hwif->dma_start = &tc86c001_dma_start; } static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev, @@ -187,10 +180,29 @@ static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev, return err; } +static const struct ide_port_ops tc86c001_port_ops = { + .set_pio_mode = tc86c001_set_pio_mode, + .set_dma_mode = tc86c001_set_mode, + .cable_detect = tc86c001_cable_detect, +}; + +static const struct ide_dma_ops tc86c001_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = tc86c001_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + static const struct ide_port_info tc86c001_chipset __devinitdata = { .name = "TC86C001", .init_chipset = init_chipset_tc86c001, .init_hwif = init_hwif_tc86c001, + .port_ops = &tc86c001_port_ops, + .dma_ops = &tc86c001_dma_ops, .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD | IDE_HFLAG_ABUSE_SET_DMA_MODE, .pio_mask = ATA_PIO4, diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index 3316b197c779..db65a558d4ec 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c @@ -87,16 +87,15 @@ static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio) triflex_set_mode(drive, XFER_PIO_0 + pio); } -static void __devinit init_hwif_triflex(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &triflex_set_pio_mode; - hwif->set_dma_mode = &triflex_set_mode; -} +static const struct ide_port_ops triflex_port_ops = { + .set_pio_mode = triflex_set_pio_mode, + .set_dma_mode = triflex_set_mode, +}; static const struct ide_port_info triflex_device __devinitdata = { .name = "TRIFLEX", - .init_hwif = init_hwif_triflex, .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}}, + .port_ops = &triflex_port_ops, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index 2b8f3a2837d7..15ee38f7ad3f 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -214,7 +214,7 @@ static void trm290_dma_start(ide_drive_t *drive) { } -static int trm290_ide_dma_end (ide_drive_t *drive) +static int trm290_dma_end(ide_drive_t *drive) { u16 status; @@ -225,7 +225,7 @@ static int trm290_ide_dma_end (ide_drive_t *drive) return status != 0x00ff; } -static int trm290_ide_dma_test_irq (ide_drive_t *drive) +static int trm290_dma_test_irq(ide_drive_t *drive) { u16 status; @@ -254,22 +254,11 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) hwif->config_data = cfg_base; hwif->dma_base = (cfg_base + 4) ^ (hwif->channel ? 0x80 : 0); - printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx", + printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name, hwif->dma_base, hwif->dma_base + 3); - if (!request_region(hwif->dma_base, 4, hwif->name)) { - printk(KERN_CONT " -- Error, ports in use.\n"); + if (ide_allocate_dma_engine(hwif)) return; - } - - hwif->dmatable_cpu = pci_alloc_consistent(dev, PRD_ENTRIES * PRD_BYTES, - &hwif->dmatable_dma); - if (!hwif->dmatable_cpu) { - printk(KERN_CONT " -- Error, unable to allocate DMA table.\n"); - release_region(hwif->dma_base, 4); - return; - } - printk(KERN_CONT "\n"); local_irq_save(flags); /* put config reg into first byte of hwif->select_data */ @@ -291,14 +280,6 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) /* sharing IRQ with mate */ hwif->irq = hwif->mate->irq; - hwif->dma_host_set = &trm290_dma_host_set; - hwif->dma_setup = &trm290_dma_setup; - hwif->dma_exec_cmd = &trm290_dma_exec_cmd; - hwif->dma_start = &trm290_dma_start; - hwif->ide_dma_end = &trm290_ide_dma_end; - hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq; - - hwif->selectproc = &trm290_selectproc; #if 1 { /* @@ -328,10 +309,27 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) #endif } +static const struct ide_port_ops trm290_port_ops = { + .selectproc = trm290_selectproc, +}; + +static struct ide_dma_ops trm290_dma_ops = { + .dma_host_set = trm290_dma_host_set, + .dma_setup = trm290_dma_setup, + .dma_exec_cmd = trm290_dma_exec_cmd, + .dma_start = trm290_dma_start, + .dma_end = trm290_dma_end, + .dma_test_irq = trm290_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + static const struct ide_port_info trm290_chipset __devinitdata = { .name = "TRM290", .init_hwif = init_hwif_trm290, .chipset = ide_trm290, + .port_ops = &trm290_port_ops, + .dma_ops = &trm290_dma_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | #if 0 /* play it safe for now */ IDE_HFLAG_TRUST_BIOS_FOR_DMA | diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index cff3cafedc47..bbd17bec6ffe 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -415,19 +415,17 @@ static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA40; } -static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &via_set_pio_mode; - hwif->set_dma_mode = &via_set_drive; - - hwif->cable_detect = via82cxxx_cable_detect; -} +static const struct ide_port_ops via_port_ops = { + .set_pio_mode = via_set_pio_mode, + .set_dma_mode = via_set_drive, + .cable_detect = via82cxxx_cable_detect, +}; static const struct ide_port_info via82cxxx_chipset __devinitdata = { .name = "VP_IDE", .init_chipset = init_chipset_via82cxxx, - .init_hwif = init_hwif_via82cxxx, .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, + .port_ops = &via_port_ops, .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_POST_SET_MODE | diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index 467656f06ccc..a82f6efb660b 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -438,10 +438,14 @@ static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) #elif defined(CONFIG_IDE_EXT_DIRECT) printk("%s[%d] %s: not implemented yet!\n", - __FILE__,__LINE__,__FUNCTION__); + __FILE__, __LINE__, __func__); #endif /* defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_PCMCIA */ } +static const struct ide_port_ops m8xx_port_ops = { + .set_pio_mode = m8xx_ide_set_pio_mode, +}; + static void ide_interrupt_ack (void *dev) { @@ -810,9 +814,8 @@ static int __init mpc8xx_ide_probe(void) ide_hwif_t *hwif = &ide_hwifs[0]; ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; hwif->pio_mask = ATA_PIO4; - hwif->set_pio_mode = m8xx_ide_set_pio_mode; + hwif->port_ops = &m8xx_port_ops; idx[0] = 0; } @@ -822,9 +825,8 @@ static int __init mpc8xx_ide_probe(void) ide_hwif_t *mate = &ide_hwifs[1]; ide_init_port_hw(mate, &hw); - mate->mmio = 1; mate->pio_mask = ATA_PIO4; - mate->set_pio_mode = m8xx_ide_set_pio_mode; + mate->port_ops = &m8xx_port_ops; idx[1] = 1; } diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 177961edc430..185faa0dce94 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -409,7 +409,7 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time) */ #define IDE_WAKEUP_DELAY (1*HZ) -static int pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif); +static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *); static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); static void pmac_ide_selectproc(ide_drive_t *drive); static void pmac_ide_kauai_selectproc(ide_drive_t *drive); @@ -918,11 +918,29 @@ pmac_ide_do_resume(ide_hwif_t *hwif) return 0; } +static const struct ide_port_ops pmac_ide_ata6_port_ops = { + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_kauai_selectproc, +}; + +static const struct ide_port_ops pmac_ide_port_ops = { + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_selectproc, +}; + +static const struct ide_dma_ops pmac_dma_ops; + static const struct ide_port_info pmac_port_info = { + .init_dma = pmac_ide_init_dma, .chipset = ide_pmac, +#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + .dma_ops = &pmac_dma_ops, +#endif + .port_ops = &pmac_ide_port_ops, .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ IDE_HFLAG_UNMASK_IRQS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -947,12 +965,15 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) pmif->broken_dma = pmif->broken_dma_warn = 0; if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; + d.port_ops = &pmac_ide_ata6_port_ops; d.udma_mask = ATA_UDMA6; } else if (of_device_is_compatible(np, "kauai-ata")) { pmif->kind = controller_un_ata6; + d.port_ops = &pmac_ide_ata6_port_ops; d.udma_mask = ATA_UDMA5; } else if (of_device_is_compatible(np, "K2-UATA")) { pmif->kind = controller_k2_ata6; + d.port_ops = &pmac_ide_ata6_port_ops; d.udma_mask = ATA_UDMA5; } else if (of_device_is_compatible(np, "keylargo-ata")) { if (strcmp(np->name, "ata-4") == 0) { @@ -1029,37 +1050,29 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) default_hwif_mmiops(hwif); hwif->OUTBSYNC = pmac_outbsync; - /* Tell common code _not_ to mess with resources */ - hwif->mmio = 1; hwif->hwif_data = pmif; ide_init_port_hw(hwif, hw); - hwif->noprobe = pmif->mediabay; hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; - hwif->set_pio_mode = pmac_ide_set_pio_mode; - if (pmif->kind == controller_un_ata6 - || pmif->kind == controller_k2_ata6 - || pmif->kind == controller_sh_ata6) - hwif->selectproc = pmac_ide_kauai_selectproc; - else - hwif->selectproc = pmac_ide_selectproc; - hwif->set_dma_mode = pmac_ide_set_dma_mode; printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, pmif->mediabay ? " (mediabay)" : "", hwif->irq); - + + if (pmif->mediabay) { #ifdef CONFIG_PMAC_MEDIABAY - if (pmif->mediabay && check_media_bay_by_base(pmif->regbase, MB_CD) == 0) - hwif->noprobe = 0; -#endif /* CONFIG_PMAC_MEDIABAY */ + if (check_media_bay_by_base(pmif->regbase, MB_CD)) { +#else + if (1) { +#endif + hwif->drives[0].noprobe = 1; + hwif->drives[1].noprobe = 1; + } + } #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC if (pmif->cable_80 == 0) d.udma_mask &= ATA_UDMA2; - /* has a DBDMA controller channel */ - if (pmif->dma_regs == 0 || pmac_ide_setup_dma(pmif, hwif) < 0) #endif - d.udma_mask = d.mwdma_mask = 0; idx[0] = hwif->index; @@ -1662,18 +1675,31 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive) printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status); } +static const struct ide_dma_ops pmac_dma_ops = { + .dma_host_set = pmac_ide_dma_host_set, + .dma_setup = pmac_ide_dma_setup, + .dma_exec_cmd = pmac_ide_dma_exec_cmd, + .dma_start = pmac_ide_dma_start, + .dma_end = pmac_ide_dma_end, + .dma_test_irq = pmac_ide_dma_test_irq, + .dma_timeout = ide_dma_timeout, + .dma_lost_irq = pmac_ide_dma_lost_irq, +}; + /* * Allocate the data structures needed for using DMA with an interface * and fill the proper list of functions pointers */ -static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) +static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) { + pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)hwif->hwif_data; struct pci_dev *dev = to_pci_dev(hwif->dev); /* We won't need pci_dev if we switch to generic consistent * DMA routines ... */ - if (dev == NULL) + if (dev == NULL || pmif->dma_regs == 0) return -ENODEV; /* * Allocate space for the DBDMA commands. @@ -1692,18 +1718,14 @@ static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->sg_max_nents = MAX_DCMDS; - hwif->dma_host_set = &pmac_ide_dma_host_set; - hwif->dma_setup = &pmac_ide_dma_setup; - hwif->dma_exec_cmd = &pmac_ide_dma_exec_cmd; - hwif->dma_start = &pmac_ide_dma_start; - hwif->ide_dma_end = &pmac_ide_dma_end; - hwif->ide_dma_test_irq = &pmac_ide_dma_test_irq; - hwif->dma_timeout = &ide_dma_timeout; - hwif->dma_lost_irq = &pmac_ide_dma_lost_irq; - return 0; } - +#else +static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) +{ + return -EOPNOTSUPP; +} #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ module_init(pmac_ide_probe); diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 6302010fd8e2..5171601fb255 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -72,16 +72,16 @@ static void ide_pci_clear_simplex(unsigned long dma_base, const char *name) } /** - * ide_get_or_set_dma_base - setup BMIBA - * @d: IDE port info + * ide_pci_dma_base - setup BMIBA * @hwif: IDE interface + * @d: IDE port info * * Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space. * Where a device has a partner that is already in DMA mode we check * and enforce IDE simplex rules. */ -static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_hwif_t *hwif) +unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long dma_base = 0; @@ -132,6 +132,31 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_ out: return dma_base; } +EXPORT_SYMBOL_GPL(ide_pci_dma_base); + +/* + * Set up BM-DMA capability (PnP BIOS should have done this) + */ +int ide_pci_set_master(struct pci_dev *dev, const char *name) +{ + u16 pcicmd; + + pci_read_config_word(dev, PCI_COMMAND, &pcicmd); + + if ((pcicmd & PCI_COMMAND_MASTER) == 0) { + pci_set_master(dev); + + if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || + (pcicmd & PCI_COMMAND_MASTER) == 0) { + printk(KERN_ERR "%s: error updating PCICMD on %s\n", + name, pci_name(dev)); + return -EIO; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(ide_pci_set_master); #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d) @@ -158,7 +183,7 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise); static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) { - int ret; + int ret, bars; if (pci_enable_device(dev)) { ret = pci_enable_device_io(dev); @@ -181,13 +206,21 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) goto out; } - /* FIXME: Temporary - until we put in the hotplug interface logic - Check that the bits we want are not in use by someone else. */ - ret = pci_request_region(dev, 4, "ide_tmp"); - if (ret < 0) - goto out; + if (d->host_flags & IDE_HFLAG_SINGLE) + bars = (1 << 2) - 1; + else + bars = (1 << 4) - 1; - pci_release_region(dev, 4); + if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) { + if (d->host_flags & IDE_HFLAG_CS5520) + bars |= (1 << 2); + else + bars |= (1 << 4); + } + + ret = pci_request_selected_regions(dev, bars, d->name); + if (ret < 0) + printk(KERN_ERR "%s: can't reserve resources\n", d->name); out: return ret; } @@ -314,7 +347,6 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, ide_init_port_hw(hwif, &hw); hwif->dev = &dev->dev; - hwif->cds = d; return hwif; } @@ -330,40 +362,33 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, * state */ -void ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) +int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); - u16 pcicmd; - - pci_read_config_word(dev, PCI_COMMAND, &pcicmd); if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 || ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 0x80))) { - unsigned long dma_base = ide_get_or_set_dma_base(d, hwif); - if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) { - /* - * Set up BM-DMA capability - * (PnP BIOS should have done this) - */ - pci_set_master(dev); - if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || !(pcicmd & PCI_COMMAND_MASTER)) { - printk(KERN_ERR "%s: %s error updating PCICMD\n", - hwif->name, d->name); - dma_base = 0; - } - } - if (dma_base) { - if (d->init_dma) { - d->init_dma(hwif, dma_base); - } else { - ide_setup_dma(hwif, dma_base); - } - } else { - printk(KERN_INFO "%s: %s Bus-Master DMA disabled " - "(BIOS)\n", hwif->name, d->name); - } + unsigned long base = ide_pci_dma_base(hwif, d); + + if (base == 0 || ide_pci_set_master(dev, d->name) < 0) + return -1; + + if (hwif->mmio) + printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); + else + printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", + hwif->name, base, base + 7); + + hwif->extra_base = base + (hwif->channel ? 8 : 16); + + if (ide_allocate_dma_engine(hwif)) + return -1; + + ide_setup_dma(hwif, base); } + + return 0; } #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 93c3fc20aa59..3638fa808ded 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -393,7 +393,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) printk ("ide-scsi: %s: DMA complete\n", drive->name); #endif /* IDESCSI_DEBUG_LOG */ pc->xferred = pc->req_xfer; - (void) HWIF(drive)->ide_dma_end(drive); + (void)hwif->dma_ops->dma_end(drive); } /* Clear the interrupt */ @@ -498,7 +498,7 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) drive->hwif->atapi_output_bytes(drive, scsi->pc->c, 12); if (pc->flags & PC_FLAG_DMA_OK) { pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_start(drive); + hwif->dma_ops->dma_start(drive); } return ide_started; } @@ -560,7 +560,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, if (drive->using_dma && !idescsi_map_sg(drive, pc)) { hwif->sg_mapped = 1; - dma = !hwif->dma_setup(drive); + dma = !hwif->dma_ops->dma_setup(drive); hwif->sg_mapped = 0; } diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h index 89655c0cdcd6..b493a5e46c63 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -70,7 +70,6 @@ typedef struct ide_hwif_t *hwif; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA ide_drive_t *drive; - u8 white_list, black_list; struct dbdma_cmd *dma_table_cpu; dma_addr_t dma_table_dma; #endif @@ -81,47 +80,6 @@ typedef struct #endif } _auide_hwif; -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -/* HD white list */ -static const struct drive_list_entry dma_white_list [] = { -/* - * Hitachi - */ - { "HITACHI_DK14FA-20" , NULL }, - { "HTS726060M9AT00" , NULL }, -/* - * Maxtor - */ - { "Maxtor 6E040L0" , NULL }, - { "Maxtor 6Y080P0" , NULL }, - { "Maxtor 6Y160P0" , NULL }, -/* - * Seagate - */ - { "ST3120026A" , NULL }, - { "ST320014A" , NULL }, - { "ST94011A" , NULL }, - { "ST340016A" , NULL }, -/* - * Western Digital - */ - { "WDC WD400UE-00HCT0" , NULL }, - { "WDC WD400JB-00JJC0" , NULL }, - { NULL , NULL } -}; - -/* HD black list */ -static const struct drive_list_entry dma_black_list [] = { -/* - * Western Digital - */ - { "WDC WD100EB-00CGH0" , NULL }, - { "WDC WD200BB-00AUA1" , NULL }, - { "WDC AC24300L" , NULL }, - { NULL , NULL } -}; -#endif - /******************************************************************************* * PIO Mode timing calculation : * * * diff --git a/include/linux/ide.h b/include/linux/ide.h index f20410dd4482..f0af504dfa42 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -387,6 +387,43 @@ typedef struct ide_drive_s { struct ide_port_info; +struct ide_port_ops { + /* host specific initialization of devices on a port */ + void (*port_init_devs)(struct hwif_s *); + /* routine to program host for PIO mode */ + void (*set_pio_mode)(ide_drive_t *, const u8); + /* routine to program host for DMA mode */ + void (*set_dma_mode)(ide_drive_t *, const u8); + /* tweaks hardware to select drive */ + void (*selectproc)(ide_drive_t *); + /* chipset polling based on hba specifics */ + int (*reset_poll)(ide_drive_t *); + /* chipset specific changes to default for device-hba resets */ + void (*pre_reset)(ide_drive_t *); + /* routine to reset controller after a disk reset */ + void (*resetproc)(ide_drive_t *); + /* special host masking for drive selection */ + void (*maskproc)(ide_drive_t *, int); + /* check host's drive quirk list */ + void (*quirkproc)(ide_drive_t *); + + u8 (*mdma_filter)(ide_drive_t *); + u8 (*udma_filter)(ide_drive_t *); + + u8 (*cable_detect)(struct hwif_s *); +}; + +struct ide_dma_ops { + void (*dma_host_set)(struct ide_drive_s *, int); + int (*dma_setup)(struct ide_drive_s *); + void (*dma_exec_cmd)(struct ide_drive_s *, u8); + void (*dma_start)(struct ide_drive_s *); + int (*dma_end)(struct ide_drive_s *); + int (*dma_test_irq)(struct ide_drive_s *); + void (*dma_lost_irq)(struct ide_drive_s *); + void (*dma_timeout)(struct ide_drive_s *); +}; + typedef struct hwif_s { struct hwif_s *next; /* for linked-list in ide_hwgroup_t */ struct hwif_s *mate; /* other hwif from same PCI chip */ @@ -420,38 +457,12 @@ typedef struct hwif_s { struct device *dev; - const struct ide_port_info *cds; /* chipset device struct */ - ide_ack_intr_t *ack_intr; void (*rw_disk)(ide_drive_t *, struct request *); -#if 0 - ide_hwif_ops_t *hwifops; -#else - /* host specific initialization of devices on a port */ - void (*port_init_devs)(struct hwif_s *); - /* routine to program host for PIO mode */ - void (*set_pio_mode)(ide_drive_t *, const u8); - /* routine to program host for DMA mode */ - void (*set_dma_mode)(ide_drive_t *, const u8); - /* tweaks hardware to select drive */ - void (*selectproc)(ide_drive_t *); - /* chipset polling based on hba specifics */ - int (*reset_poll)(ide_drive_t *); - /* chipset specific changes to default for device-hba resets */ - void (*pre_reset)(ide_drive_t *); - /* routine to reset controller after a disk reset */ - void (*resetproc)(ide_drive_t *); - /* special host masking for drive selection */ - void (*maskproc)(ide_drive_t *, int); - /* check host's drive quirk list */ - void (*quirkproc)(ide_drive_t *); -#endif - u8 (*mdma_filter)(ide_drive_t *); - u8 (*udma_filter)(ide_drive_t *); - - u8 (*cable_detect)(struct hwif_s *); + const struct ide_port_ops *port_ops; + const struct ide_dma_ops *dma_ops; void (*ata_input_data)(ide_drive_t *, void *, u32); void (*ata_output_data)(ide_drive_t *, void *, u32); @@ -459,15 +470,7 @@ typedef struct hwif_s { void (*atapi_input_bytes)(ide_drive_t *, void *, u32); void (*atapi_output_bytes)(ide_drive_t *, void *, u32); - void (*dma_host_set)(ide_drive_t *, int); - int (*dma_setup)(ide_drive_t *); - void (*dma_exec_cmd)(ide_drive_t *, u8); - void (*dma_start)(ide_drive_t *); - int (*ide_dma_end)(ide_drive_t *drive); - int (*ide_dma_test_irq)(ide_drive_t *drive); void (*ide_dma_clear_irq)(ide_drive_t *drive); - void (*dma_lost_irq)(ide_drive_t *drive); - void (*dma_timeout)(ide_drive_t *drive); void (*OUTB)(u8 addr, unsigned long port); void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port); @@ -514,7 +517,6 @@ typedef struct hwif_s { unsigned long extra_base; /* extra addr for dma ports */ unsigned extra_ports; /* number of extra dma ports */ - unsigned noprobe : 1; /* don't probe for this interface */ unsigned present : 1; /* this interface exists */ unsigned serialized : 1; /* serialized all channel operation */ unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */ @@ -1009,10 +1011,15 @@ void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); #ifdef CONFIG_BLK_DEV_IDEDMA_PCI -void ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); +int ide_pci_set_master(struct pci_dev *, const char *); +unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *); +int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); #else -static inline void ide_hwif_setup_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) { } +static inline int ide_hwif_setup_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) +{ + return -EINVAL; +} #endif extern void default_hwif_iops(ide_hwif_t *); @@ -1084,6 +1091,8 @@ enum { /* unmask IRQs */ IDE_HFLAG_UNMASK_IRQS = (1 << 25), IDE_HFLAG_ABUSE_SET_DMA_MODE = (1 << 26), + /* serialize ports if DMA is possible (for sl82c105) */ + IDE_HFLAG_SERIALIZE_DMA = (1 << 27), /* force host out of "simplex" mode */ IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28), /* DSC overlap is unsupported */ @@ -1105,10 +1114,14 @@ struct ide_port_info { unsigned int (*init_chipset)(struct pci_dev *, const char *); void (*init_iops)(ide_hwif_t *); void (*init_hwif)(ide_hwif_t *); - void (*init_dma)(ide_hwif_t *, unsigned long); + int (*init_dma)(ide_hwif_t *, + const struct ide_port_info *); + + const struct ide_port_ops *port_ops; + const struct ide_dma_ops *dma_ops; + ide_pci_enablebit_t enablebits[2]; hwif_chipset_t chipset; - u8 extra; u32 host_flags; u8 pio_mask; u8 swdma_mask; @@ -1155,13 +1168,16 @@ void ide_destroy_dmatable(ide_drive_t *); #ifdef CONFIG_BLK_DEV_IDEDMA_SFF extern int ide_build_dmatable(ide_drive_t *, struct request *); -extern int ide_release_dma(ide_hwif_t *); -extern void ide_setup_dma(ide_hwif_t *, unsigned long); +int ide_allocate_dma_engine(ide_hwif_t *); +void ide_release_dma_engine(ide_hwif_t *); +void ide_setup_dma(ide_hwif_t *, unsigned long); void ide_dma_host_set(ide_drive_t *, int); extern int ide_dma_setup(ide_drive_t *); +void ide_dma_exec_cmd(ide_drive_t *, u8); extern void ide_dma_start(ide_drive_t *); extern int __ide_dma_end(ide_drive_t *); +int ide_dma_test_irq(ide_drive_t *); extern void ide_dma_lost_irq(ide_drive_t *); extern void ide_dma_timeout(ide_drive_t *); #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ @@ -1179,7 +1195,7 @@ static inline void ide_check_dma_crc(ide_drive_t *drive) { ; } #endif /* CONFIG_BLK_DEV_IDEDMA */ #ifndef CONFIG_BLK_DEV_IDEDMA_SFF -static inline void ide_release_dma(ide_hwif_t *drive) {;} +static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; } #endif #ifdef CONFIG_BLK_DEV_IDEACPI @@ -1199,8 +1215,6 @@ static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {} #endif void ide_remove_port_from_hwgroup(ide_hwif_t *); -extern int ide_hwif_request_regions(ide_hwif_t *hwif); -extern void ide_hwif_release_regions(ide_hwif_t* hwif); void ide_unregister(unsigned int); void ide_register_region(struct gendisk *); @@ -1210,6 +1224,7 @@ void ide_undecoded_slave(ide_drive_t *); int ide_device_add_all(u8 *idx, const struct ide_port_info *); int ide_device_add(u8 idx[4], const struct ide_port_info *); +int ide_legacy_device_add(const struct ide_port_info *, unsigned long); void ide_port_unregister_devices(ide_hwif_t *); void ide_port_scan(ide_hwif_t *); |