summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2016-04-01 14:38:59 -0400
committerDavid S. Miller <davem@davemloft.net>2016-04-01 14:38:59 -0400
commitce2a04c15f4b943015aab0c7476cb1460654e914 (patch)
tree160bc8bb98d4211393230dcfbc6440359c00ecd0
parentc66e98c9532bf7b58fe78cc59fb37d3ff651756d (diff)
parenta7657f128c279ae5796ab2ca7d04a7819f4259f0 (diff)
downloadlinux-ce2a04c15f4b943015aab0c7476cb1460654e914.tar.bz2
Merge branch 'stmmac-fixes'
Giuseppe Cavallaro says: ==================== stmmac MDIO and normal descr fixes This patch series is to fix the problems below and recently debugged in this mailing list: o to fix a problem for the HW where the normal descriptor o to fix the mdio registration according to the different platform configurations I am resending all the patches again: built on top of net.git repo. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/norm_desc.c16
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c16
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c10
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c91
-rw-r--r--include/linux/stmmac.h1
5 files changed, 80 insertions, 54 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index e13228f115f0..011386f6f24d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -199,11 +199,6 @@ static void ndesc_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
{
unsigned int tdes1 = p->des1;
- if (mode == STMMAC_CHAIN_MODE)
- norm_set_tx_desc_len_on_chain(p, len);
- else
- norm_set_tx_desc_len_on_ring(p, len);
-
if (is_fs)
tdes1 |= TDES1_FIRST_SEGMENT;
else
@@ -217,10 +212,15 @@ static void ndesc_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
if (ls)
tdes1 |= TDES1_LAST_SEGMENT;
- if (tx_own)
- tdes1 |= TDES0_OWN;
-
p->des1 = tdes1;
+
+ if (mode == STMMAC_CHAIN_MODE)
+ norm_set_tx_desc_len_on_chain(p, len);
+ else
+ norm_set_tx_desc_len_on_ring(p, len);
+
+ if (tx_own)
+ p->des0 |= TDES0_OWN;
}
static void ndesc_set_tx_ic(struct dma_desc *p)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4c5ce9848ca9..78464fa7fe1f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -278,7 +278,6 @@ static void stmmac_eee_ctrl_timer(unsigned long arg)
*/
bool stmmac_eee_init(struct stmmac_priv *priv)
{
- char *phy_bus_name = priv->plat->phy_bus_name;
unsigned long flags;
bool ret = false;
@@ -290,7 +289,7 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
goto out;
/* Never init EEE in case of a switch is attached */
- if (phy_bus_name && (!strcmp(phy_bus_name, "fixed")))
+ if (priv->phydev->is_pseudo_fixed_link)
goto out;
/* MAC core supports the EEE feature. */
@@ -827,12 +826,8 @@ static int stmmac_init_phy(struct net_device *dev)
phydev = of_phy_connect(dev, priv->plat->phy_node,
&stmmac_adjust_link, 0, interface);
} else {
- if (priv->plat->phy_bus_name)
- snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
- priv->plat->phy_bus_name, priv->plat->bus_id);
- else
- snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
- priv->plat->bus_id);
+ snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
+ priv->plat->bus_id);
snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
priv->plat->phy_addr);
@@ -871,9 +866,8 @@ static int stmmac_init_phy(struct net_device *dev)
}
/* If attached to a switch, there is no reason to poll phy handler */
- if (priv->plat->phy_bus_name)
- if (!strcmp(priv->plat->phy_bus_name, "fixed"))
- phydev->irq = PHY_IGNORE_INTERRUPT;
+ if (phydev->is_pseudo_fixed_link)
+ phydev->irq = PHY_IGNORE_INTERRUPT;
pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)"
" Link = %d\n", dev->name, phydev->phy_id, phydev->link);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index ea76129dafc2..06704ca6f9ca 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -198,20 +198,12 @@ int stmmac_mdio_register(struct net_device *ndev)
struct mii_bus *new_bus;
struct stmmac_priv *priv = netdev_priv(ndev);
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
- int addr, found;
struct device_node *mdio_node = priv->plat->mdio_node;
+ int addr, found;
if (!mdio_bus_data)
return 0;
- if (IS_ENABLED(CONFIG_OF)) {
- if (mdio_node) {
- netdev_dbg(ndev, "FOUND MDIO subnode\n");
- } else {
- netdev_warn(ndev, "No MDIO subnode found\n");
- }
- }
-
new_bus = mdiobus_alloc();
if (new_bus == NULL)
return -ENOMEM;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index dcbd2a1601e8..cf37ea558ecc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -132,6 +132,69 @@ static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev)
}
/**
+ * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources
+ * @plat: driver data platform structure
+ * @np: device tree node
+ * @dev: device pointer
+ * Description:
+ * The mdio bus will be allocated in case of a phy transceiver is on board;
+ * it will be NULL if the fixed-link is configured.
+ * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated
+ * in any case (for DSA, mdio must be registered even if fixed-link).
+ * The table below sums the supported configurations:
+ * -------------------------------
+ * snps,phy-addr | Y
+ * -------------------------------
+ * phy-handle | Y
+ * -------------------------------
+ * fixed-link | N
+ * -------------------------------
+ * snps,dwmac-mdio |
+ * even if | Y
+ * fixed-link |
+ * -------------------------------
+ *
+ * It returns 0 in case of success otherwise -ENODEV.
+ */
+static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
+ struct device_node *np, struct device *dev)
+{
+ bool mdio = true;
+
+ /* If phy-handle property is passed from DT, use it as the PHY */
+ plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+ if (plat->phy_node)
+ dev_dbg(dev, "Found phy-handle subnode\n");
+
+ /* If phy-handle is not specified, check if we have a fixed-phy */
+ if (!plat->phy_node && of_phy_is_fixed_link(np)) {
+ if ((of_phy_register_fixed_link(np) < 0))
+ return -ENODEV;
+
+ dev_dbg(dev, "Found fixed-link subnode\n");
+ plat->phy_node = of_node_get(np);
+ mdio = false;
+ }
+
+ /* If snps,dwmac-mdio is passed from DT, always register the MDIO */
+ for_each_child_of_node(np, plat->mdio_node) {
+ if (of_device_is_compatible(plat->mdio_node, "snps,dwmac-mdio"))
+ break;
+ }
+
+ if (plat->mdio_node) {
+ dev_dbg(dev, "Found MDIO subnode\n");
+ mdio = true;
+ }
+
+ if (mdio)
+ plat->mdio_bus_data =
+ devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data),
+ GFP_KERNEL);
+ return 0;
+}
+
+/**
* stmmac_probe_config_dt - parse device-tree driver parameters
* @pdev: platform_device structure
* @plat: driver data platform structure
@@ -146,7 +209,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
struct device_node *np = pdev->dev.of_node;
struct plat_stmmacenet_data *plat;
struct stmmac_dma_cfg *dma_cfg;
- struct device_node *child_node = NULL;
plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
if (!plat)
@@ -166,36 +228,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
/* Default to phy auto-detection */
plat->phy_addr = -1;
- /* If we find a phy-handle property, use it as the PHY */
- plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
-
- /* If phy-handle is not specified, check if we have a fixed-phy */
- if (!plat->phy_node && of_phy_is_fixed_link(np)) {
- if ((of_phy_register_fixed_link(np) < 0))
- return ERR_PTR(-ENODEV);
-
- plat->phy_node = of_node_get(np);
- }
-
- for_each_child_of_node(np, child_node)
- if (of_device_is_compatible(child_node, "snps,dwmac-mdio")) {
- plat->mdio_node = child_node;
- break;
- }
-
/* "snps,phy-addr" is not a standard property. Mark it as deprecated
* and warn of its use. Remove this when phy node support is added.
*/
if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
- if ((plat->phy_node && !of_phy_is_fixed_link(np)) || !plat->mdio_node)
- plat->mdio_bus_data = NULL;
- else
- plat->mdio_bus_data =
- devm_kzalloc(&pdev->dev,
- sizeof(struct stmmac_mdio_bus_data),
- GFP_KERNEL);
+ /* To Configure PHY by using all device-tree supported properties */
+ if (stmmac_dt_phy(plat, np, &pdev->dev))
+ return ERR_PTR(-ENODEV);
of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 4bcf5a61aada..e6bc30a42a74 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -108,7 +108,6 @@ struct stmmac_axi {
};
struct plat_stmmacenet_data {
- char *phy_bus_name;
int bus_id;
int phy_addr;
int interface;