summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-11-27 14:22:03 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-11-27 14:22:03 -0800
commitc64410f3eca037f831e9db7cf880e600acc841af (patch)
treeb8d6967be9c20bb37e20dbd4382b63439822bbf3
parenta3b11c79addf5613c4a10b27349f862e1e0f5bfe (diff)
parenta405fd1b1fd2f96ab7c57a600d3c21f4eae6882c (diff)
downloadlinux-c64410f3eca037f831e9db7cf880e600acc841af.tar.bz2
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann: "There is a small backlog of at91 patches here, the most significant is the addition of some sama5d2 Xplained nodes that were waiting on an MFD include file to get merged through another tree. We normally try to sort those out before the merge window opens, but the maintainer wasn't aware of that here and I decided to merge the changes this time as an exception. On OMAP a series of audio changes for dra7 missed the merge window but turned out to be necessary to fix a boot time imprecise external abort error and to get audio working. The other changes are the usual simple changes, here is a list sorted by platform: at91: removal of a useless defconfig option removal of some legacy DT pieces use of the proper watchdog compatible string update of the MAINTAINERS entries for some Atmel drivers drivers/scpi: hide get_scpi_ops in module from built-in code imx: add missing .irq_set_type for i.MX GPC irq_chip. fix the wrong spi-num-chipselects settings for Vybrid DSPI devices. fix a merge error in Vybrid dts regarding to ADC device property keystone: fix the optional PDSP firmware loading fix linking RAM setup for QMs fix crash with clk_ignore_unused mediatek: Enable SCPSYS power domain driver by default mvebu: fix QNAP TS219 power-off in dts fix legacy get_irqnr_and_base for dove and orion5x omap: fix l4 related boot time errors for dm81xx use lockless cldm/pwrdm api in omap4_boot_secondary remove t410 abort handler to avoid hiding other critical errors mark cpuidle tracepoints as _rcuidle fix module alias for omap-ocp2scp pxa: palm: Fix typos in PWM lookup table code renesas: missing __initconst annotation for r8a7793_boards_compat_dt rockchip: disable mmc-tuning on the veyron-minnie board adding the init state for the over-temperature-protection zx: only build power domain code when CONFIG_PM=y" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: OMAP4+: SMP: use lockless clkdm/pwrdm api in omap4_boot_secondary arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data ARM: orion5x: Fix legacy get_irqnr_and_base ARM: dove: Fix legacy get_irqnr_and_base soc: Mediatek: Enable SCPSYS power domain driver by default ARM: dts: vfxxx: Fix dspi[01] spi-num-chipselects. ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs soc: ti: knav_qmss_queue: Fix linking RAM setup for queue managers soc: ti: use request_firmware_direct() as acc firmware is optional ARM: imx: add platform irq type setting in gpc ARM: dts: vfxxx: Fix erroneous property in esdhc0 node ARM: shmobile: r8a7793: proper constness with __initconst scpi: hide get_scpi_ops in module from built-in code ARM: zx: only build power domain code when CONFIG_PM=y ARM: pxa: palm: Fix typos in PWM lookup table code ARM: dts: Kirkwood: Fix QNAP TS219 power-off ARM: dts: rockchip: Add OTP gpio pinctrl to rk3288 tsadc node ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288 minnie MAINTAINERS: Atmel drivers: change NAND and ISI entries ARM: at91/dt: sama5d2 Xplained: add several devices ...
-rw-r--r--Documentation/arm/keystone/Overview.txt18
-rw-r--r--MAINTAINERS5
-rw-r--r--arch/arm/boot/dts/animeo_ip.dts6
-rw-r--r--arch/arm/boot/dts/at91-foxg20.dts2
-rw-r--r--arch/arm/boot/dts/at91-kizbox.dts13
-rw-r--r--arch/arm/boot/dts/at91-kizbox2.dts6
-rw-r--r--arch/arm/boot/dts/at91-kizboxmini.dts4
-rw-r--r--arch/arm/boot/dts/at91-qil_a9260.dts2
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts115
-rw-r--r--arch/arm/boot/dts/at91-sama5d3_xplained.dts2
-rw-r--r--arch/arm/boot/dts/at91-sama5d4_xplained.dts12
-rw-r--r--arch/arm/boot/dts/at91-sama5d4ek.dts12
-rw-r--r--arch/arm/boot/dts/at91rm9200ek.dts9
-rw-r--r--arch/arm/boot/dts/at91sam9261ek.dts19
-rw-r--r--arch/arm/boot/dts/at91sam9263ek.dts13
-rw-r--r--arch/arm/boot/dts/at91sam9g20ek_common.dtsi13
-rw-r--r--arch/arm/boot/dts/at91sam9m10g45ek.dts13
-rw-r--r--arch/arm/boot/dts/at91sam9n12ek.dts11
-rw-r--r--arch/arm/boot/dts/at91sam9rlek.dts13
-rw-r--r--arch/arm/boot/dts/at91sam9x5cm.dtsi11
-rw-r--r--arch/arm/boot/dts/dra7.dtsi4
-rw-r--r--arch/arm/boot/dts/k2l-netcp.dtsi2
-rw-r--r--arch/arm/boot/dts/kirkwood-ts219.dtsi2
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-minnie.dts4
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi10
-rw-r--r--arch/arm/boot/dts/sama5d35ek.dts2
-rw-r--r--arch/arm/boot/dts/sama5d4.dtsi2
-rw-r--r--arch/arm/boot/dts/usb_a9260_common.dtsi2
-rw-r--r--arch/arm/boot/dts/usb_a9263.dts2
-rw-r--r--arch/arm/boot/dts/vfxxx.dtsi8
-rw-r--r--arch/arm/configs/at91_dt_defconfig1
-rw-r--r--arch/arm/configs/sama5_defconfig1
-rw-r--r--arch/arm/mach-dove/include/mach/entry-macro.S4
-rw-r--r--arch/arm/mach-imx/gpc.c1
-rw-r--r--arch/arm/mach-omap2/omap-smp.c6
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c66
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.h3
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c56
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_81xx_data.c3
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c29
-rw-r--r--arch/arm/mach-omap2/pm34xx.c4
-rw-r--r--arch/arm/mach-orion5x/include/mach/entry-macro.S2
-rw-r--r--arch/arm/mach-pxa/palm27x.c2
-rw-r--r--arch/arm/mach-pxa/palmtc.c2
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7793.c2
-rw-r--r--arch/arm/mach-zx/Kconfig2
-rw-r--r--drivers/bus/omap-ocp2scp.c2
-rw-r--r--drivers/soc/mediatek/Kconfig1
-rw-r--r--drivers/soc/ti/knav_qmss_queue.c8
-rw-r--r--include/linux/scpi_protocol.h2
50 files changed, 280 insertions, 254 deletions
diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt
index f17bc4c9dff9..400c0c270d2e 100644
--- a/Documentation/arm/keystone/Overview.txt
+++ b/Documentation/arm/keystone/Overview.txt
@@ -49,24 +49,6 @@ specified through DTS. Following are the DTS used:-
The device tree documentation for the keystone machines are located at
Documentation/devicetree/bindings/arm/keystone/keystone.txt
-Known issues & workaround
--------------------------
-
-Some of the device drivers used on keystone are re-used from that from
-DaVinci and other TI SoCs. These device drivers may use clock APIs directly.
-Some of the keystone specific drivers such as netcp uses run time power
-management API instead to enable clock. As this API has limitations on
-keystone, following workaround is needed to boot Linux.
-
- Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise
- clock frameworks will try to disable clocks that are unused and disable
- the hardware. This is because netcp related power domain and clock
- domains are enabled in u-boot as run time power management API currently
- doesn't enable clocks for netcp due to a limitation. This workaround is
- expected to be removed in the future when proper API support becomes
- available. Until then, this work around is needed.
-
-
Document Author
---------------
Murali Karicheri <m-karicheri2@ti.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index 3f92804f5dac..cba790b42f23 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1931,7 +1931,7 @@ S: Supported
F: drivers/i2c/busses/i2c-at91.c
ATMEL ISI DRIVER
-M: Josh Wu <josh.wu@atmel.com>
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-media@vger.kernel.org
S: Supported
F: drivers/media/platform/soc_camera/atmel-isi.c
@@ -1950,7 +1950,8 @@ S: Supported
F: drivers/net/ethernet/cadence/
ATMEL NAND DRIVER
-M: Josh Wu <josh.wu@atmel.com>
+M: Wenyou Yang <wenyou.yang@atmel.com>
+M: Josh Wu <rainyfeeling@outlook.com>
L: linux-mtd@lists.infradead.org
S: Supported
F: drivers/mtd/nand/atmel_nand*
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 4e0ad3b82796..0962f2fa3f6e 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -155,21 +155,21 @@
label = "keyswitch_in";
gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
error_in {
label = "error_in";
gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
linux,code = <29>;
- gpio-key,wakeup;
+ wakeup-source;
};
btn {
label = "btn";
gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
linux,code = <31>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index f89598af4c2b..6bf873e7d96c 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -159,7 +159,7 @@
label = "Button";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index bf18ece0c027..229e989eb60d 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -24,15 +24,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
main_xtal {
clock-frequency = <18432000>;
};
@@ -94,14 +85,14 @@
label = "PB_RST";
gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
user {
label = "PB_USER";
gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
index f0b1563cb3f1..50a14568f094 100644
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ b/arch/arm/boot/dts/at91-kizbox2.dts
@@ -171,21 +171,21 @@
label = "PB_PROG";
gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
- gpio-key,wakeup;
+ wakeup-source;
};
reset {
label = "PB_RST";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
user {
label = "PB_USER";
gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
index 9f72b4932634..9682d105d4d8 100644
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -98,14 +98,14 @@
label = "PB_PROG";
gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
- gpio-key,wakeup;
+ wakeup-source;
};
reset {
label = "PB_RST";
gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index a9aef53ab764..4f2eebf4a560 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -183,7 +183,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index e07c2b206beb..ad6de73ed5a5 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -45,6 +45,7 @@
/dts-v1/;
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
/ {
model = "Atmel SAMA5D2 Xplained";
@@ -59,15 +60,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -91,6 +83,22 @@
status = "okay";
};
+ sdmmc0: sdio-host@a0000000 {
+ bus-width = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc0_default>;
+ non-removable;
+ mmc-ddr-1_8v;
+ status = "okay";
+ };
+
+ sdmmc1: sdio-host@b0000000 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc1_default>;
+ status = "okay"; /* conflict with qspi0 */
+ };
+
apb {
spi0: spi@f8000000 {
pinctrl-names = "default";
@@ -181,12 +189,49 @@
};
};
+ flx0: flexcom@f8034000 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+
+ uart5: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&flx0_clk>;
+ clock-names = "usart";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx0_default>;
+ atmel,fifo-size = <32>;
+ status = "okay";
+ };
+ };
+
uart3: serial@fc008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_default>;
status = "okay";
};
+ flx4: flexcom@fc018000 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c2: i2c@600 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <0>, <0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&flx4_clk>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx4_default>;
+ atmel,fifo-size = <16>;
+ status = "okay";
+ };
+ };
+
i2c1: i2c@fc028000 {
dmas = <0>, <0>;
pinctrl-names = "default";
@@ -201,6 +246,18 @@
};
pinctrl@fc038000 {
+ pinctrl_flx0_default: flx0_default {
+ pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+ <PIN_PB29__FLEXCOM0_IO1>;
+ bias-disable;
+ };
+
+ pinctrl_flx4_default: flx4_default {
+ pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+ <PIN_PD13__FLEXCOM4_IO1>;
+ bias-disable;
+ };
+
pinctrl_i2c0_default: i2c0_default {
pinmux = <PIN_PD21__TWD0>,
<PIN_PD22__TWCK0>;
@@ -227,6 +284,46 @@
bias-disable;
};
+ pinctrl_sdmmc0_default: sdmmc0_default {
+ cmd_data {
+ pinmux = <PIN_PA1__SDMMC0_CMD>,
+ <PIN_PA2__SDMMC0_DAT0>,
+ <PIN_PA3__SDMMC0_DAT1>,
+ <PIN_PA4__SDMMC0_DAT2>,
+ <PIN_PA5__SDMMC0_DAT3>,
+ <PIN_PA6__SDMMC0_DAT4>,
+ <PIN_PA7__SDMMC0_DAT5>,
+ <PIN_PA8__SDMMC0_DAT6>,
+ <PIN_PA9__SDMMC0_DAT7>;
+ bias-pull-up;
+ };
+
+ ck_cd_rstn_vddsel {
+ pinmux = <PIN_PA0__SDMMC0_CK>,
+ <PIN_PA10__SDMMC0_RSTN>,
+ <PIN_PA11__SDMMC0_VDDSEL>,
+ <PIN_PA13__SDMMC0_CD>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_sdmmc1_default: sdmmc1_default {
+ cmd_data {
+ pinmux = <PIN_PA28__SDMMC1_CMD>,
+ <PIN_PA18__SDMMC1_DAT0>,
+ <PIN_PA19__SDMMC1_DAT1>,
+ <PIN_PA20__SDMMC1_DAT2>,
+ <PIN_PA21__SDMMC1_DAT3>;
+ bias-pull-up;
+ };
+
+ conf-ck_cd {
+ pinmux = <PIN_PA22__SDMMC1_CK>,
+ <PIN_PA30__SDMMC1_CD>;
+ bias-disable;
+ };
+ };
+
pinctrl_spi0_default: spi0_default {
pinmux = <PIN_PA14__SPI0_SPCK>,
<PIN_PA15__SPI0_MOSI>,
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 8488ac53d22d..ff888d21c786 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -315,7 +315,7 @@
label = "PB_USER";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 45371a1b61b3..131614f28e75 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -50,7 +50,6 @@
compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
chosen {
- bootargs = "ignore_loglevel earlyprintk";
stdout-path = "serial0:115200n8";
};
@@ -59,15 +58,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -235,7 +225,7 @@
label = "pb_user1";
gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 6d272c0125e3..2d4a33100af6 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -50,7 +50,6 @@
compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
chosen {
- bootargs = "ignore_loglevel earlyprintk";
stdout-path = "serial0:115200n8";
};
@@ -59,15 +58,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -304,7 +294,7 @@
label = "pb_user1";
gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 8dab4b75ca97..f90e1c2d3caa 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -21,15 +21,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 2e92ac020f23..55bd51f07fa6 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -22,15 +22,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -149,7 +140,7 @@
ti,debounce-tol = /bits/ 16 <65535>;
ti,debounce-max = /bits/ 16 <1>;
- linux,wakeup;
+ wakeup-source;
};
};
@@ -193,28 +184,28 @@
label = "button_0";
gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
linux,code = <256>;
- gpio-key,wakeup;
+ wakeup-source;
};
button_1 {
label = "button_1";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <257>;
- gpio-key,wakeup;
+ wakeup-source;
};
button_2 {
label = "button_2";
gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
linux,code = <258>;
- gpio-key,wakeup;
+ wakeup-source;
};
button_3 {
label = "button_3";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <259>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 23381276ffb8..59df9d73d276 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -22,15 +22,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <16367660>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -213,14 +204,14 @@
label = "left_click";
gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
linux,code = <272>;
- gpio-key,wakeup;
+ wakeup-source;
};
right_click {
label = "right_click";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <273>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 57548a2c5a1e..e9cc99b6353a 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -19,15 +19,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -206,14 +197,14 @@
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
- gpio-key,wakeup;
+ wakeup-source;
};
btn4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 9d16ef8453c5..2400c99134f7 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -24,15 +24,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -323,14 +314,14 @@
label = "left_click";
gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
linux,code = <272>;
- gpio-key,wakeup;
+ wakeup-source;
};
right_click {
label = "right_click";
gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
linux,code = <273>;
- gpio-key,wakeup;
+ wakeup-source;
};
left {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index acf3451a332d..ca4ddf86817a 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -23,15 +23,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <16000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -219,7 +210,7 @@
label = "Enter";
gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 558c9f220bed..f10566f759cd 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -22,15 +22,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -225,14 +216,14 @@
label = "right_click";
gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,code = <273>;
- gpio-key,wakeup;
+ wakeup-source;
};
left_click {
label = "left_click";
gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,code = <272>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 26112ebd15fc..b098ad8cd93a 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -13,17 +13,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
- };
-
- clocks {
slow_xtal {
clock-frequency = <32768>;
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index bc672fb91466..fe99231cbde5 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1459,8 +1459,8 @@
interrupt-names = "tx", "rx";
dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
dma-names = "tx", "rx";
- clocks = <&mcasp3_ahclkx_mux>;
- clock-names = "fck";
+ clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi
index 01aef230773d..5acbd0dcc2ab 100644
--- a/arch/arm/boot/dts/k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/k2l-netcp.dtsi
@@ -137,7 +137,7 @@ netcp: netcp@26000000 {
/* NetCP address range */
ranges = <0 0x26000000 0x1000000>;
- clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+ clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>;
dma-coherent;
ti,navigator-dmas = <&dma_gbe 0>,
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index c56ab6bbfe3c..0e46560551f4 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -40,7 +40,7 @@
};
poweroff@12100 {
compatible = "qnap,power-off";
- reg = <0x12000 0x100>;
+ reg = <0x12100 0x100>;
clocks = <&gate_clk 7>;
};
spi@10600 {
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 8fd8ef2c72da..85f0373df498 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -86,6 +86,10 @@
};
};
+&emmc {
+ /delete-property/mmc-hs200-1_8v;
+};
+
&gpio_keys {
pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6a79c9c526b8..04ea209f1737 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -452,8 +452,10 @@
clock-names = "tsadc", "apb_pclk";
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
- pinctrl-names = "default";
- pinctrl-0 = <&otp_out>;
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&otp_gpio>;
+ pinctrl-1 = <&otp_out>;
+ pinctrl-2 = <&otp_gpio>;
#thermal-sensor-cells = <1>;
rockchip,hw-tshut-temp = <95000>;
status = "disabled";
@@ -1395,6 +1397,10 @@
};
tsadc {
+ otp_gpio: otp-gpio {
+ rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
otp_out: otp-out {
rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
};
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index d9a9aca1ccfd..e812f5c1bf70 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -49,7 +49,7 @@
label = "pb_user1";
gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 15bbaf690047..2193637b9cd2 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1300,7 +1300,7 @@
};
watchdog@fc068640 {
- compatible = "atmel,at91sam9260-wdt";
+ compatible = "atmel,sama5d4-wdt";
reg = <0xfc068640 0x10>;
clocks = <&clk32k>;
status = "disabled";
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index 12edafefd44a..9beea8976584 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -115,7 +115,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 68c0de36c339..8cc6edb29694 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -143,7 +143,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 6736bae43a5b..0d5acc2cdc8e 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -158,7 +158,7 @@
interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
- spi-num-chipselects = <5>;
+ spi-num-chipselects = <6>;
status = "disabled";
};
@@ -170,7 +170,7 @@
interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI1>;
clock-names = "dspi";
- spi-num-chipselects = <5>;
+ spi-num-chipselects = <4>;
status = "disabled";
};
@@ -461,6 +461,8 @@
clock-names = "adc";
#io-channel-cells = <1>;
status = "disabled";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
};
esdhc0: esdhc@400b1000 {
@@ -472,8 +474,6 @@
<&clks VF610_CLK_ESDHC0>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
- fsl,adck-max-frequency = <30000000>, <40000000>,
- <20000000>;
};
esdhc1: esdhc@400b2000 {
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 1b1e5acd76e2..e4b1be66b3f5 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -125,7 +125,6 @@ CONFIG_POWER_RESET=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_SSB=m
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index a0c57ac88b27..63f7e6ce649a 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -129,7 +129,6 @@ CONFIG_GPIO_SYSFS=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
# CONFIG_HWMON is not set
-CONFIG_SSB=m
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
index 72d622baaad3..df1d44bdc375 100644
--- a/arch/arm/mach-dove/include/mach/entry-macro.S
+++ b/arch/arm/mach-dove/include/mach/entry-macro.S
@@ -18,13 +18,13 @@
@ check low interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
- mov \irqnr, #31
+ mov \irqnr, #32
ands \irqstat, \irqstat, \tmp
@ if no low interrupts set, check high interrupts
ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- moveq \irqnr, #63
+ moveq \irqnr, #64
andeqs \irqstat, \irqstat, \tmp
@ find first active interrupt source
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 8e7976a4c3e7..cfc696b972f3 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -177,6 +177,7 @@ static struct irq_chip imx_gpc_chip = {
.irq_unmask = imx_gpc_irq_unmask,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_set_wake = imx_gpc_irq_set_wake,
+ .irq_set_type = irq_chip_set_type_parent,
#ifdef CONFIG_SMP
.irq_set_affinity = irq_chip_set_affinity_parent,
#endif
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 5305ec7341ec..79e1f876d1c9 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -143,9 +143,9 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
* Ensure that CPU power state is set to ON to avoid CPU
* powerdomain transition on wfi
*/
- clkdm_wakeup(cpu1_clkdm);
- omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON);
- clkdm_allow_idle(cpu1_clkdm);
+ clkdm_wakeup_nolock(cpu1_clkdm);
+ pwrdm_set_next_pwrst(cpu1_pwrdm, PWRDM_POWER_ON);
+ clkdm_allow_idle_nolock(cpu1_clkdm);
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
while (gic_dist_disabled()) {
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index cc8a987149e2..48495ad82aba 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -890,6 +890,36 @@ static int _init_opt_clks(struct omap_hwmod *oh)
return ret;
}
+static void _enable_optional_clocks(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_opt_clk *oc;
+ int i;
+
+ pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
+
+ for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+ if (oc->_clk) {
+ pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
+ __clk_get_name(oc->_clk));
+ clk_enable(oc->_clk);
+ }
+}
+
+static void _disable_optional_clocks(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_opt_clk *oc;
+ int i;
+
+ pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
+
+ for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+ if (oc->_clk) {
+ pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
+ __clk_get_name(oc->_clk));
+ clk_disable(oc->_clk);
+ }
+}
+
/**
* _enable_clocks - enable hwmod main clock and interface clocks
* @oh: struct omap_hwmod *
@@ -917,6 +947,9 @@ static int _enable_clocks(struct omap_hwmod *oh)
clk_enable(os->_clk);
}
+ if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
+ _enable_optional_clocks(oh);
+
/* The opt clocks are controlled by the device driver. */
return 0;
@@ -948,41 +981,14 @@ static int _disable_clocks(struct omap_hwmod *oh)
clk_disable(os->_clk);
}
+ if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
+ _disable_optional_clocks(oh);
+
/* The opt clocks are controlled by the device driver. */
return 0;
}
-static void _enable_optional_clocks(struct omap_hwmod *oh)
-{
- struct omap_hwmod_opt_clk *oc;
- int i;
-
- pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
-
- for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
- if (oc->_clk) {
- pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
- __clk_get_name(oc->_clk));
- clk_enable(oc->_clk);
- }
-}
-
-static void _disable_optional_clocks(struct omap_hwmod *oh)
-{
- struct omap_hwmod_opt_clk *oc;
- int i;
-
- pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
-
- for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
- if (oc->_clk) {
- pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
- __clk_get_name(oc->_clk));
- clk_disable(oc->_clk);
- }
-}
-
/**
* _omap4_enable_module - enable CLKCTRL modulemode on OMAP4
* @oh: struct omap_hwmod *
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index ca6df1a73475..76bce11c85a4 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -523,6 +523,8 @@ struct omap_hwmod_omap4_prcm {
* HWMOD_RECONFIG_IO_CHAIN: omap_hwmod code needs to reconfigure wake-up
* events by calling _reconfigure_io_chain() when a device is enabled
* or idled.
+ * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to
+ * operate and they need to be handled at the same time as the main_clk.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -538,6 +540,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_FORCE_MSTANDBY (1 << 11)
#define HWMOD_SWSUP_SIDLE_ACT (1 << 12)
#define HWMOD_RECONFIG_IO_CHAIN (1 << 13)
+#define HWMOD_OPT_CLKS_NEEDED (1 << 14)
/*
* omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 51d1ecb384bd..ee4e04434a94 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1298,6 +1298,44 @@ static struct omap_hwmod dra7xx_mcspi4_hwmod = {
};
/*
+ * 'mcasp' class
+ *
+ */
+static struct omap_hwmod_class_sysconfig dra7xx_mcasp_sysc = {
+ .sysc_offs = 0x0004,
+ .sysc_flags = SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class dra7xx_mcasp_hwmod_class = {
+ .name = "mcasp",
+ .sysc = &dra7xx_mcasp_sysc,
+};
+
+/* mcasp3 */
+static struct omap_hwmod_opt_clk mcasp3_opt_clks[] = {
+ { .role = "ahclkx", .clk = "mcasp3_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp3_hwmod = {
+ .name = "mcasp3",
+ .class = &dra7xx_mcasp_hwmod_class,
+ .clkdm_name = "l4per2_clkdm",
+ .main_clk = "mcasp3_aux_gfclk_mux",
+ .flags = HWMOD_OPT_CLKS_NEEDED,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .opt_clks = mcasp3_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcasp3_opt_clks),
+};
+
+/*
* 'mmc' class
*
*/
@@ -2566,6 +2604,22 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_per2 -> mcasp3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp3 = {
+ .master = &dra7xx_l4_per2_hwmod,
+ .slave = &dra7xx_mcasp3_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> mcasp3 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp3 = {
+ .master = &dra7xx_l3_main_1_hwmod,
+ .slave = &dra7xx_mcasp3_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* l4_per1 -> elm */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
.master = &dra7xx_l4_per1_hwmod,
@@ -3308,6 +3362,8 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_wkup__dcan1,
&dra7xx_l4_per2__dcan2,
&dra7xx_l4_per2__cpgmac0,
+ &dra7xx_l4_per2__mcasp3,
+ &dra7xx_l3_main_1__mcasp3,
&dra7xx_gmac__mdio,
&dra7xx_l4_cfg__dma_system,
&dra7xx_l3_main_1__dss,
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index b1288f56d509..6256052893ec 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -144,6 +144,7 @@ static struct omap_hwmod dm81xx_l4_ls_hwmod = {
.name = "l4_ls",
.clkdm_name = "alwon_l3s_clkdm",
.class = &l4_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
};
/*
@@ -155,6 +156,7 @@ static struct omap_hwmod dm81xx_l4_hs_hwmod = {
.name = "l4_hs",
.clkdm_name = "alwon_l3_med_clkdm",
.class = &l4_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
};
/* L3 slow -> L4 ls peripheral interface running at 125MHz */
@@ -850,6 +852,7 @@ static struct omap_hwmod dm816x_emac0_hwmod = {
.name = "emac0",
.clkdm_name = "alwon_ethernet_clkdm",
.class = &dm816x_emac_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
};
static struct omap_hwmod_ocp_if dm81xx_l4_hs__emac0 = {
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 1dfe34654c43..58144779dec4 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -24,9 +24,6 @@
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/wkup_m3.h>
-#include <asm/siginfo.h>
-#include <asm/signal.h>
-
#include "common.h"
#include "common-board-devices.h"
#include "dss-common.h"
@@ -385,29 +382,6 @@ static void __init omap3_pandora_legacy_init(void)
}
#endif /* CONFIG_ARCH_OMAP3 */
-#ifdef CONFIG_SOC_TI81XX
-static int fault_fixed_up;
-
-static int t410_abort_handler(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
-{
- if ((fsr == 0x406 || fsr == 0xc06) && !fault_fixed_up) {
- pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
- addr, fsr);
- fault_fixed_up = 1;
- return 0;
- }
-
- return 1;
-}
-
-static void __init t410_abort_init(void)
-{
- hook_fault_code(16 + 6, t410_abort_handler, SIGBUS, BUS_OBJERR,
- "imprecise external abort");
-}
-#endif
-
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
static struct iommu_platform_data omap4_iommu_pdata = {
.reset_name = "mmu_cache",
@@ -536,9 +510,6 @@ static struct pdata_init pdata_quirks[] __initdata = {
{ "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
{ "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
#endif
-#ifdef CONFIG_SOC_TI81XX
- { "hp,t410", t410_abort_init, },
-#endif
#ifdef CONFIG_SOC_OMAP5
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
#endif
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 87b98bf92366..2dbd3785ee6f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -301,11 +301,11 @@ static void omap3_pm_idle(void)
if (omap_irq_pending())
return;
- trace_cpu_idle(1, smp_processor_id());
+ trace_cpu_idle_rcuidle(1, smp_processor_id());
omap_sram_idle();
- trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
+ trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
#ifdef CONFIG_SUSPEND
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
index 79eb502a1e64..73919a36b577 100644
--- a/arch/arm/mach-orion5x/include/mach/entry-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -21,5 +21,5 @@
@ find cause bits that are unmasked
ands \irqstat, \irqstat, \tmp @ clear Z flag if any
clzne \irqnr, \irqstat @ calc irqnr
- rsbne \irqnr, \irqnr, #31
+ rsbne \irqnr, \irqnr, #32
.endm
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 13eba2b26e0a..8fbfb10047ec 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -344,7 +344,7 @@ void __init palm27x_pwm_init(int bl, int lcd)
{
palm_bl_power = bl;
palm_lcd_power = lcd;
- pwm_add_lookup(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
+ pwm_add_table(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
platform_device_register(&palm27x_backlight);
}
#endif
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index aebf6de62468..0b5c3876720c 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -169,7 +169,7 @@ static inline void palmtc_keys_init(void) {}
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static struct pwm_lookup palmtc_pwm_lookup[] = {
PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
- PWM_PERIOD_NORMAL),
+ PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data palmtc_backlight_data = {
diff --git a/arch/arm/mach-shmobile/setup-r8a7793.c b/arch/arm/mach-shmobile/setup-r8a7793.c
index 1d2825cb7a65..5fce87f7f254 100644
--- a/arch/arm/mach-shmobile/setup-r8a7793.c
+++ b/arch/arm/mach-shmobile/setup-r8a7793.c
@@ -19,7 +19,7 @@
#include "common.h"
#include "rcar-gen2.h"
-static const char *r8a7793_boards_compat_dt[] __initconst = {
+static const char * const r8a7793_boards_compat_dt[] __initconst = {
"renesas,r8a7793",
NULL,
};
diff --git a/arch/arm/mach-zx/Kconfig b/arch/arm/mach-zx/Kconfig
index 7fdc5bf24f9b..446334a25cf5 100644
--- a/arch/arm/mach-zx/Kconfig
+++ b/arch/arm/mach-zx/Kconfig
@@ -13,7 +13,7 @@ config SOC_ZX296702
select ARM_GLOBAL_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select PM_GENERIC_DOMAINS
+ select PM_GENERIC_DOMAINS if PM
help
Support for ZTE ZX296702 SoC which is a dual core CortexA9MP
endif
diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
index 9f1856948758..bf500e0e7362 100644
--- a/drivers/bus/omap-ocp2scp.c
+++ b/drivers/bus/omap-ocp2scp.c
@@ -117,7 +117,7 @@ static struct platform_driver omap_ocp2scp_driver = {
module_platform_driver(omap_ocp2scp_driver);
-MODULE_ALIAS("platform: omap-ocp2scp");
+MODULE_ALIAS("platform:omap-ocp2scp");
MODULE_AUTHOR("Texas Instruments Inc.");
MODULE_DESCRIPTION("OMAP OCP2SCP driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index 9d5068248aa0..0a4ea809a61b 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -23,6 +23,7 @@ config MTK_PMIC_WRAP
config MTK_SCPSYS
bool "MediaTek SCPSYS Support"
depends on ARCH_MEDIATEK || COMPILE_TEST
+ default ARM64 && ARCH_MEDIATEK
select REGMAP
select MTK_INFRACFG
select PM_GENERIC_DOMAINS if PM
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index f3a0b6a4b54e..8c03a80b482d 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -1179,7 +1179,7 @@ static int knav_queue_setup_link_ram(struct knav_device *kdev)
block++;
if (!block->size)
- return 0;
+ continue;
dev_dbg(kdev->dev, "linkram1: phys:%x, virt:%p, size:%x\n",
block->phys, block->virt, block->size);
@@ -1519,9 +1519,9 @@ static int knav_queue_load_pdsp(struct knav_device *kdev,
for (i = 0; i < ARRAY_SIZE(knav_acc_firmwares); i++) {
if (knav_acc_firmwares[i]) {
- ret = request_firmware(&fw,
- knav_acc_firmwares[i],
- kdev->dev);
+ ret = request_firmware_direct(&fw,
+ knav_acc_firmwares[i],
+ kdev->dev);
if (!ret) {
found = true;
break;
diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h
index 80af3cd35ae4..72ce932c69b2 100644
--- a/include/linux/scpi_protocol.h
+++ b/include/linux/scpi_protocol.h
@@ -71,7 +71,7 @@ struct scpi_ops {
int (*sensor_get_value)(u16, u32 *);
};
-#if IS_ENABLED(CONFIG_ARM_SCPI_PROTOCOL)
+#if IS_REACHABLE(CONFIG_ARM_SCPI_PROTOCOL)
struct scpi_ops *get_scpi_ops(void);
#else
static inline struct scpi_ops *get_scpi_ops(void) { return NULL; }