ide: move IDE{FLOPPY,TAPE}_WAIT_CMD defines to <linux/ide.h>

While at it:

* IDE{FLOPPY,TAPE}_WAIT_CMD -> WAIT_{FLOPPY,TAPE}_CMD

* Use enum for WAIT_* defines.

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

3 files changed, 29 insertions, 25 deletions

diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 4d7e9ef82425..a63aba2c8265 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -61,10 +61,6 @@
 #define debug_log(fmt, args...) do {} while (0)
 #endif
 
-
-/* Some drives require a longer irq timeout. */
-#define IDEFLOPPY_WAIT_CMD		(5 * WAIT_CMD)
-
 /*
  * After each failed packet command we issue a request sense command and retry
  * the packet command IDEFLOPPY_MAX_PC_RETRIES times.
@@ -226,7 +222,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
 	idefloppy_floppy_t *floppy = drive->driver_data;
 
 	return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr,
-			   IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers,
+			   WAIT_FLOPPY_CMD, NULL, idefloppy_update_buffers,
 			   idefloppy_retry_pc, NULL, ide_io_buffers);
 }
 
@@ -244,10 +240,9 @@ static int idefloppy_transfer_pc(ide_drive_t *drive)
 	drive->hwif->tp_ops->output_data(drive, NULL, floppy->pc->c, 12);
 
 	/* Timeout for the packet command */
-	return IDEFLOPPY_WAIT_CMD;
+	return WAIT_FLOPPY_CMD;
 }
 
-
 /*
  * Called as an interrupt (or directly). When the device says it's ready for a
  * packet, we schedule the packet transfer to occur about 2-3 ticks later in
@@ -272,7 +267,7 @@ static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
 		timeout = floppy->ticks;
 		expiry = &idefloppy_transfer_pc;
 	} else {
-		timeout = IDEFLOPPY_WAIT_CMD;
+		timeout = WAIT_FLOPPY_CMD;
 		expiry = NULL;
 	}
 
@@ -322,7 +317,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
 	pc->retries++;
 
 	return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer,
-			    IDEFLOPPY_WAIT_CMD, NULL);
+			    WAIT_FLOPPY_CMD, NULL);
 }
 
 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 737dd7db6bb7..25190966ed39 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -81,13 +81,6 @@ enum {
 #define IDETAPE_MAX_PC_RETRIES		3
 
 /*
- * Some drives (for example, Seagate STT3401A Travan) require a very long
- * timeout, because they don't return an interrupt or clear their busy bit
- * until after the command completes (even retension commands).
- */
-#define IDETAPE_WAIT_CMD		(900*HZ)
-
-/*
  * The following parameter is used to select the point in the internal tape fifo
  * in which we will start to refill the buffer. Decreasing the following
  * parameter will improve the system's latency and interactive response, while
@@ -663,7 +656,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
-	return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD,
+	return ide_pc_intr(drive, tape->pc, idetape_pc_intr, WAIT_TAPE_CMD,
 			   NULL, idetape_update_buffers, idetape_retry_pc,
 			   ide_tape_handle_dsc, ide_tape_io_buffers);
 }
@@ -709,7 +702,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
 	idetape_tape_t *tape = drive->driver_data;
 
 	return ide_transfer_pc(drive, tape->pc, idetape_pc_intr,
-			       IDETAPE_WAIT_CMD, NULL);
+			       WAIT_TAPE_CMD, NULL);
 }
 
 static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
@@ -758,7 +751,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
 	pc->retries++;
 
 	return ide_issue_pc(drive, pc, idetape_transfer_pc,
-			    IDETAPE_WAIT_CMD, NULL);
+			    WAIT_TAPE_CMD, NULL);
 }
 
 /* A mode sense command is used to "sense" tape parameters. */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 55098eed3b21..a9eced25acce 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -133,12 +133,28 @@ struct ide_io_ports {
 /*
  * Timeouts for various operations:
  */
-#define WAIT_DRQ	(HZ/10)		/* 100msec - spec allows up to 20ms */
-#define WAIT_READY	(5*HZ)		/* 5sec - some laptops are very slow */
-#define WAIT_PIDENTIFY	(10*HZ)	/* 10sec  - should be less than 3ms (?), if all ATAPI CD is closed at boot */
-#define WAIT_WORSTCASE	(30*HZ)	/* 30sec  - worst case when spinning up */
-#define WAIT_CMD	(10*HZ)	/* 10sec  - maximum wait for an IRQ to happen */
-#define WAIT_MIN_SLEEP	(2*HZ/100)	/* 20msec - minimum sleep time */
+enum {
+	/* spec allows up to 20ms */
+	WAIT_DRQ	= HZ / 10,	/* 100ms */
+	/* some laptops are very slow */
+	WAIT_READY	= 5 * HZ,	/* 5s */
+	/* should be less than 3ms (?), if all ATAPI CD is closed at boot */
+	WAIT_PIDENTIFY	= 10 * HZ,	/* 10s */
+	/* worst case when spinning up */
+	WAIT_WORSTCASE	= 30 * HZ,	/* 30s */
+	/* maximum wait for an IRQ to happen */
+	WAIT_CMD	= 10 * HZ,	/* 10s */
+	/* Some drives require a longer IRQ timeout. */
+	WAIT_FLOPPY_CMD	= 50 * HZ,	/* 50s */
+	/*
+	 * Some drives (for example, Seagate STT3401A Travan) require a very
+	 * long timeout, because they don't return an interrupt or clear their
+	 * BSY bit until after the command completes (even retension commands).
+	 */
+	WAIT_TAPE_CMD	= 900 * HZ,	/* 900s */
+	/* minimum sleep time */
+	WAIT_MIN_SLEEP	= HZ / 50,	/* 20ms */
+};
 
 /*
  * Op codes for special requests to be handled by ide_special_rq().