Merge tag 'usb-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of small USB fixes for 4.20-rc4.

  There's the usual xhci and dwc2/3 fixes as well as a few minor other
  issues resolved for problems that have been reported. Full details are
  in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdc-acm: add entry for Hiro (Conexant) modem
  usb: xhci: Prevent bus suspend if a port connect change or polling state is detected
  usb: core: Fix hub port connection events lost
  usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers
  Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
  usb: dwc2: pci: Fix an error code in probe
  usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove()
  xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc
  usb: xhci: fix timeout for transition from RExit to U0
  usb: xhci: fix uninitialized completion when USB3 port got wrong status
  xhci: Add check for invalid byte size error when UAS devices are connected.
  xhci: handle port status events for removed USB3 hcd
  xhci: Fix leaking USB3 shared_hcd at xhci removal
  USB: misc: appledisplay: add 20" Apple Cinema Display
  USB: quirks: Add no-lpm quirk for Raydium touchscreens
  usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB
  USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub
  usb: dwc3: gadget: Properly check last unaligned/zero chain TRB
  usb: dwc3: core: Clean up ULPI device

20 files changed, 167 insertions, 55 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 81d1d5a74728..19f4423e70d9 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4713,6 +4713,8 @@
 					prevent spurious wakeup);
 				n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a
 					pause after every control message);
+				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
+					delay after resetting its port);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij
 
 	usbhid.mousepoll=
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 47d75c20c211..1b68fed464cb 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1696,6 +1696,9 @@ static const struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0572, 0x1349), /* Hiro (Conexant) USB MODEM H50228 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 	{ USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */
 	.driver_info = QUIRK_CONTROL_LINE_STATE, },
 	{ USB_DEVICE(0x2184, 0x001c) },	/* GW Instek AFG-2225 */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c6077d582d29..0f9381b69a3b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2794,6 +2794,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 	int i, status;
 	u16 portchange, portstatus;
 	struct usb_port *port_dev = hub->ports[port1 - 1];
+	int reset_recovery_time;
 
 	if (!hub_is_superspeed(hub->hdev)) {
 		if (warm) {
@@ -2849,7 +2850,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 					USB_PORT_FEAT_C_BH_PORT_RESET);
 			usb_clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_PORT_LINK_STATE);
-			usb_clear_port_feature(hub->hdev, port1,
+
+			if (udev)
+				usb_clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_CONNECTION);
 
 			/*
@@ -2885,11 +2888,18 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 
 done:
 	if (status == 0) {
-		/* TRSTRCY = 10 ms; plus some extra */
 		if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM)
 			usleep_range(10000, 12000);
-		else
-			msleep(10 + 40);
+		else {
+			/* TRSTRCY = 10 ms; plus some extra */
+			reset_recovery_time = 10 + 40;
+
+			/* Hub needs extra delay after resetting its port. */
+			if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET)
+				reset_recovery_time += 100;
+
+			msleep(reset_recovery_time);
+		}
 
 		if (udev) {
 			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 178d6c6063c0..f9ff03e6af93 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -128,6 +128,9 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp)
 			case 'n':
 				flags |= USB_QUIRK_DELAY_CTRL_MSG;
 				break;
+			case 'o':
+				flags |= USB_QUIRK_HUB_SLOW_RESET;
+				break;
 			/* Ignore unrecognized flag characters */
 			}
 		}
@@ -380,6 +383,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
 
+	/* Terminus Technology Inc. Hub */
+	{ USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET },
+
 	/* Corsair K70 RGB */
 	{ USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT },
 
@@ -391,6 +397,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT |
 	  USB_QUIRK_DELAY_CTRL_MSG },
 
+	/* Corsair K70 LUX RGB */
+	{ USB_DEVICE(0x1b1c, 0x1b33), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* Corsair K70 LUX */
 	{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
 
@@ -411,6 +420,11 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x2040, 0x7200), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Raydium Touchscreen */
+	{ USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM },
+
+	{ USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* DJI CineSSD */
 	{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
 
diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c
index d257c541e51b..7afc10872f1f 100644
--- a/drivers/usb/dwc2/pci.c
+++ b/drivers/usb/dwc2/pci.c
@@ -120,6 +120,7 @@ static int dwc2_pci_probe(struct pci_dev *pci,
 	dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO);
 	if (!dwc2) {
 		dev_err(dev, "couldn't allocate dwc2 device\n");
+		ret = -ENOMEM;
 		goto err;
 	}
 
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index becfbb87f791..2f2048aa5fde 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1499,6 +1499,7 @@ static int dwc3_probe(struct platform_device *pdev)
 
 err5:
 	dwc3_event_buffers_cleanup(dwc);
+	dwc3_ulpi_exit(dwc);
 
 err4:
 	dwc3_free_scratch_buffers(dwc);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 1286076a8890..842795856bf4 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -283,8 +283,10 @@ err:
 static void dwc3_pci_remove(struct pci_dev *pci)
 {
 	struct dwc3_pci		*dwc = pci_get_drvdata(pci);
+	struct pci_dev		*pdev = dwc->pci;
 
-	gpiod_remove_lookup_table(&platform_bytcr_gpios);
+	if (pdev->device == PCI_DEVICE_ID_INTEL_BYT)
+		gpiod_remove_lookup_table(&platform_bytcr_gpios);
 #ifdef CONFIG_PM
 	cancel_work_sync(&dwc->wakeup_work);
 #endif
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 679c12e14522..9faad896b3a1 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1081,7 +1081,7 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
 			/* Now prepare one extra TRB to align transfer size */
 			trb = &dep->trb_pool[dep->trb_enqueue];
 			__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr,
-					maxp - rem, false, 0,
+					maxp - rem, false, 1,
 					req->request.stream_id,
 					req->request.short_not_ok,
 					req->request.no_interrupt);
@@ -1125,7 +1125,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
 		/* Now prepare one extra TRB to align transfer size */
 		trb = &dep->trb_pool[dep->trb_enqueue];
 		__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem,
-				false, 0, req->request.stream_id,
+				false, 1, req->request.stream_id,
 				req->request.short_not_ok,
 				req->request.no_interrupt);
 	} else if (req->request.zero && req->request.length &&
@@ -1141,7 +1141,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
 		/* Now prepare one extra TRB to handle ZLP */
 		trb = &dep->trb_pool[dep->trb_enqueue];
 		__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0,
-				false, 0, req->request.stream_id,
+				false, 1, req->request.stream_id,
 				req->request.short_not_ok,
 				req->request.no_interrupt);
 	} else {
@@ -2259,7 +2259,7 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
 	 * with one TRB pending in the ring. We need to manually clear HWO bit
 	 * from that TRB.
 	 */
-	if ((req->zero || req->unaligned) && (trb->ctrl & DWC3_TRB_CTRL_HWO)) {
+	if ((req->zero || req->unaligned) && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) {
 		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
 		return 1;
 	}
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 3ada83d81bda..31e8bf3578c8 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -215,7 +215,6 @@ struct ffs_io_data {
 
 	struct mm_struct *mm;
 	struct work_struct work;
-	struct work_struct cancellation_work;
 
 	struct usb_ep *ep;
 	struct usb_request *req;
@@ -1073,31 +1072,22 @@ ffs_epfile_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static void ffs_aio_cancel_worker(struct work_struct *work)
-{
-	struct ffs_io_data *io_data = container_of(work, struct ffs_io_data,
-						   cancellation_work);
-
-	ENTER();
-
-	usb_ep_dequeue(io_data->ep, io_data->req);
-}
-
 static int ffs_aio_cancel(struct kiocb *kiocb)
 {
 	struct ffs_io_data *io_data = kiocb->private;
-	struct ffs_data *ffs = io_data->ffs;
+	struct ffs_epfile *epfile = kiocb->ki_filp->private_data;
 	int value;
 
 	ENTER();
 
-	if (likely(io_data && io_data->ep && io_data->req)) {
-		INIT_WORK(&io_data->cancellation_work, ffs_aio_cancel_worker);
-		queue_work(ffs->io_completion_wq, &io_data->cancellation_work);
-		value = -EINPROGRESS;
-	} else {
+	spin_lock_irq(&epfile->ffs->eps_lock);
+
+	if (likely(io_data && io_data->ep && io_data->req))
+		value = usb_ep_dequeue(io_data->ep, io_data->req);
+	else
 		value = -EINVAL;
-	}
+
+	spin_unlock_irq(&epfile->ffs->eps_lock);
 
 	return value;
 }
diff --git a/drivers/usb/host/xhci-histb.c b/drivers/usb/host/xhci-histb.c
index 27f00160332e..3c4abb5a1c3f 100644
--- a/drivers/usb/host/xhci-histb.c
+++ b/drivers/usb/host/xhci-histb.c
@@ -325,14 +325,16 @@ static int xhci_histb_remove(struct platform_device *dev)
 	struct xhci_hcd_histb *histb = platform_get_drvdata(dev);
 	struct usb_hcd *hcd = histb->hcd;
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct usb_hcd *shared_hcd = xhci->shared_hcd;
 
 	xhci->xhc_state |= XHCI_STATE_REMOVING;
 
-	usb_remove_hcd(xhci->shared_hcd);
+	usb_remove_hcd(shared_hcd);
+	xhci->shared_hcd = NULL;
 	device_wakeup_disable(&dev->dev);
 
 	usb_remove_hcd(hcd);
-	usb_put_hcd(xhci->shared_hcd);
+	usb_put_hcd(shared_hcd);
 
 	xhci_histb_host_disable(histb);
 	usb_put_hcd(hcd);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 12eea73d9f20..94aca1b5ac8a 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -876,7 +876,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			status |= USB_PORT_STAT_SUSPEND;
 	}
 	if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME &&
-		!DEV_SUPERSPEED_ANY(raw_port_status)) {
+		!DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) {
 		if ((raw_port_status & PORT_RESET) ||
 				!(raw_port_status & PORT_PE))
 			return 0xffffffff;
@@ -921,7 +921,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			time_left = wait_for_completion_timeout(
 					&bus_state->rexit_done[wIndex],
 					msecs_to_jiffies(
-						XHCI_MAX_REXIT_TIMEOUT));
+						XHCI_MAX_REXIT_TIMEOUT_MS));
 			spin_lock_irqsave(&xhci->lock, flags);
 
 			if (time_left) {
@@ -935,7 +935,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			} else {
 				int port_status = readl(port->addr);
 				xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n",
-						XHCI_MAX_REXIT_TIMEOUT,
+						XHCI_MAX_REXIT_TIMEOUT_MS,
 						port_status);
 				status |= USB_PORT_STAT_SUSPEND;
 				clear_bit(wIndex, &bus_state->rexit_ports);
@@ -1474,15 +1474,18 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	unsigned long flags;
 	struct xhci_hub *rhub;
 	struct xhci_port **ports;
+	u32 portsc_buf[USB_MAXCHILDREN];
+	bool wake_enabled;
 
 	rhub = xhci_get_rhub(hcd);
 	ports = rhub->ports;
 	max_ports = rhub->num_ports;
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
+	wake_enabled = hcd->self.root_hub->do_remote_wakeup;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 
-	if (hcd->self.root_hub->do_remote_wakeup) {
+	if (wake_enabled) {
 		if (bus_state->resuming_ports ||	/* USB2 */
 		    bus_state->port_remote_wakeup) {	/* USB3 */
 			spin_unlock_irqrestore(&xhci->lock, flags);
@@ -1490,26 +1493,36 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 			return -EBUSY;
 		}
 	}
-
-	port_index = max_ports;
+	/*
+	 * Prepare ports for suspend, but don't write anything before all ports
+	 * are checked and we know bus suspend can proceed
+	 */
 	bus_state->bus_suspended = 0;
+	port_index = max_ports;
 	while (port_index--) {
-		/* suspend the port if the port is not suspended */
 		u32 t1, t2;
-		int slot_id;
 
 		t1 = readl(ports[port_index]->addr);
 		t2 = xhci_port_state_to_neutral(t1);
+		portsc_buf[port_index] = 0;
 
-		if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
-			xhci_dbg(xhci, "port %d not suspended\n", port_index);
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					port_index + 1);
-			if (slot_id) {
+		/* Bail out if a USB3 port has a new device in link training */
+		if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) {
+			bus_state->bus_suspended = 0;
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_dbg(xhci, "Bus suspend bailout, port in polling\n");
+			return -EBUSY;
+		}
+
+		/* suspend ports in U0, or bail out for new connect changes */
+		if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
+			if ((t1 & PORT_CSC) && wake_enabled) {
+				bus_state->bus_suspended = 0;
 				spin_unlock_irqrestore(&xhci->lock, flags);
-				xhci_stop_device(xhci, slot_id, 1);
-				spin_lock_irqsave(&xhci->lock, flags);
+				xhci_dbg(xhci, "Bus suspend bailout, port connect change\n");
+				return -EBUSY;
 			}
+			xhci_dbg(xhci, "port %d not suspended\n", port_index);
 			t2 &= ~PORT_PLS_MASK;
 			t2 |= PORT_LINK_STROBE | XDEV_U3;
 			set_bit(port_index, &bus_state->bus_suspended);
@@ -1518,7 +1531,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 		 * including the USB 3.0 roothub, but only if CONFIG_PM
 		 * is enabled, so also enable remote wake here.
 		 */
-		if (hcd->self.root_hub->do_remote_wakeup) {
+		if (wake_enabled) {
 			if (t1 & PORT_CONNECT) {
 				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
 				t2 &= ~PORT_WKCONN_E;
@@ -1538,7 +1551,26 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 
 		t1 = xhci_port_state_to_neutral(t1);
 		if (t1 != t2)
-			writel(t2, ports[port_index]->addr);
+			portsc_buf[port_index] = t2;
+	}
+
+	/* write port settings, stopping and suspending ports if needed */
+	port_index = max_ports;
+	while (port_index--) {
+		if (!portsc_buf[port_index])
+			continue;
+		if (test_bit(port_index, &bus_state->bus_suspended)) {
+			int slot_id;
+
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+							    port_index + 1);
+			if (slot_id) {
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				xhci_stop_device(xhci, slot_id, 1);
+				spin_lock_irqsave(&xhci->lock, flags);
+			}
+		}
+		writel(portsc_buf[port_index], ports[port_index]->addr);
 	}
 	hcd->state = HC_STATE_SUSPENDED;
 	bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 71d0d33c3286..60987c787e44 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -590,12 +590,14 @@ static int xhci_mtk_remove(struct platform_device *dev)
 	struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev);
 	struct usb_hcd	*hcd = mtk->hcd;
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct usb_hcd  *shared_hcd = xhci->shared_hcd;
 
-	usb_remove_hcd(xhci->shared_hcd);
+	usb_remove_hcd(shared_hcd);
+	xhci->shared_hcd = NULL;
 	device_init_wakeup(&dev->dev, false);
 
 	usb_remove_hcd(hcd);
-	usb_put_hcd(xhci->shared_hcd);
+	usb_put_hcd(shared_hcd);
 	usb_put_hcd(hcd);
 	xhci_mtk_sch_exit(mtk);
 	xhci_mtk_clks_disable(mtk);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 01c57055c0c5..a9515265db4d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -248,6 +248,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
 		xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
 
+	if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM ||
+	     pdev->vendor == PCI_VENDOR_ID_CAVIUM) &&
+	     pdev->device == 0x9026)
+		xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
+
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"QUIRK: Resetting on resume");
@@ -380,6 +385,7 @@ static void xhci_pci_remove(struct pci_dev *dev)
 	if (xhci->shared_hcd) {
 		usb_remove_hcd(xhci->shared_hcd);
 		usb_put_hcd(xhci->shared_hcd);
+		xhci->shared_hcd = NULL;
 	}
 
 	/* Workaround for spurious wakeups at shutdown with HSW */
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 32b5574ad5c5..ef09cb06212f 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -362,14 +362,16 @@ static int xhci_plat_remove(struct platform_device *dev)
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	struct clk *clk = xhci->clk;
 	struct clk *reg_clk = xhci->reg_clk;
+	struct usb_hcd *shared_hcd = xhci->shared_hcd;
 
 	xhci->xhc_state |= XHCI_STATE_REMOVING;
 
-	usb_remove_hcd(xhci->shared_hcd);
+	usb_remove_hcd(shared_hcd);
+	xhci->shared_hcd = NULL;
 	usb_phy_shutdown(hcd->usb_phy);
 
 	usb_remove_hcd(hcd);
-	usb_put_hcd(xhci->shared_hcd);
+	usb_put_hcd(shared_hcd);
 
 	clk_disable_unprepare(clk);
 	clk_disable_unprepare(reg_clk);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a8d92c90fb58..65750582133f 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1521,6 +1521,35 @@ static void handle_device_notification(struct xhci_hcd *xhci,
 		usb_wakeup_notification(udev->parent, udev->portnum);
 }
 
+/*
+ * Quirk hanlder for errata seen on Cavium ThunderX2 processor XHCI
+ * Controller.
+ * As per ThunderX2errata-129 USB 2 device may come up as USB 1
+ * If a connection to a USB 1 device is followed by another connection
+ * to a USB 2 device.
+ *
+ * Reset the PHY after the USB device is disconnected if device speed
+ * is less than HCD_USB3.
+ * Retry the reset sequence max of 4 times checking the PLL lock status.
+ *
+ */
+static void xhci_cavium_reset_phy_quirk(struct xhci_hcd *xhci)
+{
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	u32 pll_lock_check;
+	u32 retry_count = 4;
+
+	do {
+		/* Assert PHY reset */
+		writel(0x6F, hcd->regs + 0x1048);
+		udelay(10);
+		/* De-assert the PHY reset */
+		writel(0x7F, hcd->regs + 0x1048);
+		udelay(200);
+		pll_lock_check = readl(hcd->regs + 0x1070);
+	} while (!(pll_lock_check & 0x1) && --retry_count);
+}
+
 static void handle_port_status(struct xhci_hcd *xhci,
 		union xhci_trb *event)
 {
@@ -1556,6 +1585,13 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		goto cleanup;
 	}
 
+	/* We might get interrupts after shared_hcd is removed */
+	if (port->rhub == &xhci->usb3_rhub && xhci->shared_hcd == NULL) {
+		xhci_dbg(xhci, "ignore port event for removed USB3 hcd\n");
+		bogus_port_status = true;
+		goto cleanup;
+	}
+
 	hcd = port->rhub->hcd;
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
 	hcd_portnum = port->hcd_portnum;
@@ -1639,7 +1675,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 	 * RExit to a disconnect state).  If so, let the the driver know it's
 	 * out of the RExit state.
 	 */
-	if (!DEV_SUPERSPEED_ANY(portsc) &&
+	if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 &&
 			test_and_clear_bit(hcd_portnum,
 				&bus_state->rexit_ports)) {
 		complete(&bus_state->rexit_done[hcd_portnum]);
@@ -1647,8 +1683,12 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		goto cleanup;
 	}
 
-	if (hcd->speed < HCD_USB3)
+	if (hcd->speed < HCD_USB3) {
 		xhci_test_and_clear_bit(xhci, port, PORT_PLC);
+		if ((xhci->quirks & XHCI_RESET_PLL_ON_DISCONNECT) &&
+		    (portsc & PORT_CSC) && !(portsc & PORT_CONNECT))
+			xhci_cavium_reset_phy_quirk(xhci);
+	}
 
 cleanup:
 	/* Update event ring dequeue pointer before dropping the lock */
@@ -2266,6 +2306,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			goto cleanup;
 		case COMP_RING_UNDERRUN:
 		case COMP_RING_OVERRUN:
+		case COMP_STOPPED_LENGTH_INVALID:
 			goto cleanup;
 		default:
 			xhci_err(xhci, "ERROR Transfer event for unknown stream ring slot %u ep %u\n",
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 6b5db344de30..938ff06c0349 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1303,6 +1303,7 @@ static int tegra_xusb_remove(struct platform_device *pdev)
 
 	usb_remove_hcd(xhci->shared_hcd);
 	usb_put_hcd(xhci->shared_hcd);
+	xhci->shared_hcd = NULL;
 	usb_remove_hcd(tegra->hcd);
 	usb_put_hcd(tegra->hcd);
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0420eefa647a..c928dbbff881 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -719,8 +719,6 @@ static void xhci_stop(struct usb_hcd *hcd)
 
 	/* Only halt host and free memory after both hcds are removed */
 	if (!usb_hcd_is_primary_hcd(hcd)) {
-		/* usb core will free this hcd shortly, unset pointer */
-		xhci->shared_hcd = NULL;
 		mutex_unlock(&xhci->mutex);
 		return;
 	}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index bf0b3692dc9a..260b259b72bc 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1680,7 +1680,7 @@ struct xhci_bus_state {
  * It can take up to 20 ms to transition from RExit to U0 on the
  * Intel Lynx Point LP xHCI host.
  */
-#define	XHCI_MAX_REXIT_TIMEOUT	(20 * 1000)
+#define	XHCI_MAX_REXIT_TIMEOUT_MS	20
 
 static inline unsigned int hcd_index(struct usb_hcd *hcd)
 {
@@ -1849,6 +1849,7 @@ struct xhci_hcd {
 #define XHCI_INTEL_USB_ROLE_SW	BIT_ULL(31)
 #define XHCI_ZERO_64B_REGS	BIT_ULL(32)
 #define XHCI_DEFAULT_PM_RUNTIME_ALLOW	BIT_ULL(33)
+#define XHCI_RESET_PLL_ON_DISCONNECT	BIT_ULL(34)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index bd539f3058bc..85b48c6ddc7e 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -50,6 +50,7 @@ static const struct usb_device_id appledisplay_table[] = {
 	{ APPLEDISPLAY_DEVICE(0x9219) },
 	{ APPLEDISPLAY_DEVICE(0x921c) },
 	{ APPLEDISPLAY_DEVICE(0x921d) },
+	{ APPLEDISPLAY_DEVICE(0x9222) },
 	{ APPLEDISPLAY_DEVICE(0x9236) },
 
 	/* Terminating entry */
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index b7a99ce56bc9..a1be64c9940f 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -66,4 +66,7 @@
 /* Device needs a pause after every control message. */
 #define USB_QUIRK_DELAY_CTRL_MSG		BIT(13)
 
+/* Hub needs extra delay after resetting its port. */
+#define USB_QUIRK_HUB_SLOW_RESET		BIT(14)
+
 #endif /* __LINUX_USB_QUIRKS_H */