Merge branch 'ebpf'

Alexei Starovoitov says:

====================
load imm64 insn and uapi/linux/bpf.h

V9->V10
- no changes, added Daniel's ack

Note they're on top of Hannes's patch in the same area [1]

V8 thread with 'why' reasoning and end goal [2]

Original set [3] of ~28 patches I'm planning to present in 4 stages:

  I. this 2 patches to fork off llvm upstreaming
 II. bpf syscall with manpage and map implementation
III. bpf program load/unload with verifier testsuite (1st user of
     instruction macros from bpf.h and 1st user of load imm64 insn)
 IV. tracing, etc

[1] http://patchwork.ozlabs.org/patch/385266/
[2] https://lkml.org/lkml/2014/8/27/628
[3] https://lkml.org/lkml/2014/8/26/859
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

7 files changed, 135 insertions, 56 deletions

diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt
index c48a9704bda8..81916ab5d96f 100644
--- a/Documentation/networking/filter.txt
+++ b/Documentation/networking/filter.txt
@@ -951,7 +951,7 @@ Size modifier is one of ...
 
 Mode modifier is one of:
 
-  BPF_IMM  0x00  /* classic BPF only, reserved in eBPF */
+  BPF_IMM  0x00  /* used for 32-bit mov in classic BPF and 64-bit in eBPF */
   BPF_ABS  0x20
   BPF_IND  0x40
   BPF_MEM  0x60
@@ -995,6 +995,12 @@ BPF_XADD | BPF_DW | BPF_STX: lock xadd *(u64 *)(dst_reg + off16) += src_reg
 Where size is one of: BPF_B or BPF_H or BPF_W or BPF_DW. Note that 1 and
 2 byte atomic increments are not supported.
 
+eBPF has one 16-byte instruction: BPF_LD | BPF_DW | BPF_IMM which consists
+of two consecutive 'struct bpf_insn' 8-byte blocks and interpreted as single
+instruction that loads 64-bit immediate value into a dst_reg.
+Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM which loads
+32-bit immediate value into a register.
+
 Testing
 -------
 
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 39ccfbb4a723..06f8c17f5484 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -393,6 +393,23 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 			EMIT1_off32(add_1reg(0xB8, dst_reg), imm32);
 			break;
 
+		case BPF_LD | BPF_IMM | BPF_DW:
+			if (insn[1].code != 0 || insn[1].src_reg != 0 ||
+			    insn[1].dst_reg != 0 || insn[1].off != 0) {
+				/* verifier must catch invalid insns */
+				pr_err("invalid BPF_LD_IMM64 insn\n");
+				return -EINVAL;
+			}
+
+			/* movabsq %rax, imm64 */
+			EMIT2(add_1mod(0x48, dst_reg), add_1reg(0xB8, dst_reg));
+			EMIT(insn[0].imm, 4);
+			EMIT(insn[1].imm, 4);
+
+			insn++;
+			i++;
+			break;
+
 			/* dst %= src, dst /= src, dst %= imm32, dst /= imm32 */
 		case BPF_ALU | BPF_MOD | BPF_X:
 		case BPF_ALU | BPF_DIV | BPF_X:
diff --git a/include/linux/filter.h b/include/linux/filter.h
index c78994593355..8f82ef3f1cdd 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -10,58 +10,12 @@
 #include <linux/workqueue.h>
 #include <uapi/linux/filter.h>
 #include <asm/cacheflush.h>
+#include <uapi/linux/bpf.h>
 
 struct sk_buff;
 struct sock;
 struct seccomp_data;
 
-/* Internally used and optimized filter representation with extended
- * instruction set based on top of classic BPF.
- */
-
-/* instruction classes */
-#define BPF_ALU64	0x07	/* alu mode in double word width */
-
-/* ld/ldx fields */
-#define BPF_DW		0x18	/* double word */
-#define BPF_XADD	0xc0	/* exclusive add */
-
-/* alu/jmp fields */
-#define BPF_MOV		0xb0	/* mov reg to reg */
-#define BPF_ARSH	0xc0	/* sign extending arithmetic shift right */
-
-/* change endianness of a register */
-#define BPF_END		0xd0	/* flags for endianness conversion: */
-#define BPF_TO_LE	0x00	/* convert to little-endian */
-#define BPF_TO_BE	0x08	/* convert to big-endian */
-#define BPF_FROM_LE	BPF_TO_LE
-#define BPF_FROM_BE	BPF_TO_BE
-
-#define BPF_JNE		0x50	/* jump != */
-#define BPF_JSGT	0x60	/* SGT is signed '>', GT in x86 */
-#define BPF_JSGE	0x70	/* SGE is signed '>=', GE in x86 */
-#define BPF_CALL	0x80	/* function call */
-#define BPF_EXIT	0x90	/* function return */
-
-/* Register numbers */
-enum {
-	BPF_REG_0 = 0,
-	BPF_REG_1,
-	BPF_REG_2,
-	BPF_REG_3,
-	BPF_REG_4,
-	BPF_REG_5,
-	BPF_REG_6,
-	BPF_REG_7,
-	BPF_REG_8,
-	BPF_REG_9,
-	BPF_REG_10,
-	__MAX_BPF_REG,
-};
-
-/* BPF has 10 general purpose 64-bit registers and stack frame. */
-#define MAX_BPF_REG	__MAX_BPF_REG
-
 /* ArgX, context and stack frame pointer register positions. Note,
  * Arg1, Arg2, Arg3, etc are used as argument mappings of function
  * calls in BPF_CALL instruction.
@@ -166,6 +120,24 @@ enum {
 		.off   = 0,					\
 		.imm   = IMM })
 
+/* BPF_LD_IMM64 macro encodes single 'load 64-bit immediate' insn */
+#define BPF_LD_IMM64(DST, IMM)					\
+	BPF_LD_IMM64_RAW(DST, 0, IMM)
+
+#define BPF_LD_IMM64_RAW(DST, SRC, IMM)				\
+	((struct bpf_insn) {					\
+		.code  = BPF_LD | BPF_DW | BPF_IMM,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = (__u32) (IMM) }),			\
+	((struct bpf_insn) {					\
+		.code  = 0, /* zero is reserved opcode */	\
+		.dst_reg = 0,					\
+		.src_reg = 0,					\
+		.off   = 0,					\
+		.imm   = ((__u64) (IMM)) >> 32 })
+
 /* Short form of mov based on type, BPF_X: dst_reg = src_reg, BPF_K: dst_reg = imm32 */
 
 #define BPF_MOV64_RAW(TYPE, DST, SRC, IMM)			\
@@ -304,14 +276,6 @@ enum {
 #define SK_RUN_FILTER(filter, ctx) \
 	(*filter->prog->bpf_func)(ctx, filter->prog->insnsi)
 
-struct bpf_insn {
-	__u8	code;		/* opcode */
-	__u8	dst_reg:4;	/* dest register */
-	__u8	src_reg:4;	/* source register */
-	__s16	off;		/* signed offset */
-	__s32	imm;		/* signed immediate constant */
-};
-
 #ifdef CONFIG_COMPAT
 /* A struct sock_filter is architecture independent. */
 struct compat_sock_fprog {
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 24e9033f8b3f..fb3f7b675229 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -67,6 +67,7 @@ header-y += bfs_fs.h
 header-y += binfmts.h
 header-y += blkpg.h
 header-y += blktrace_api.h
+header-y += bpf.h
 header-y += bpqether.h
 header-y += bsg.h
 header-y += btrfs.h
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
new file mode 100644
index 000000000000..479ed0b6be16
--- /dev/null
+++ b/include/uapi/linux/bpf.h
@@ -0,0 +1,65 @@
+/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+#ifndef _UAPI__LINUX_BPF_H__
+#define _UAPI__LINUX_BPF_H__
+
+#include <linux/types.h>
+
+/* Extended instruction set based on top of classic BPF */
+
+/* instruction classes */
+#define BPF_ALU64	0x07	/* alu mode in double word width */
+
+/* ld/ldx fields */
+#define BPF_DW		0x18	/* double word */
+#define BPF_XADD	0xc0	/* exclusive add */
+
+/* alu/jmp fields */
+#define BPF_MOV		0xb0	/* mov reg to reg */
+#define BPF_ARSH	0xc0	/* sign extending arithmetic shift right */
+
+/* change endianness of a register */
+#define BPF_END		0xd0	/* flags for endianness conversion: */
+#define BPF_TO_LE	0x00	/* convert to little-endian */
+#define BPF_TO_BE	0x08	/* convert to big-endian */
+#define BPF_FROM_LE	BPF_TO_LE
+#define BPF_FROM_BE	BPF_TO_BE
+
+#define BPF_JNE		0x50	/* jump != */
+#define BPF_JSGT	0x60	/* SGT is signed '>', GT in x86 */
+#define BPF_JSGE	0x70	/* SGE is signed '>=', GE in x86 */
+#define BPF_CALL	0x80	/* function call */
+#define BPF_EXIT	0x90	/* function return */
+
+/* Register numbers */
+enum {
+	BPF_REG_0 = 0,
+	BPF_REG_1,
+	BPF_REG_2,
+	BPF_REG_3,
+	BPF_REG_4,
+	BPF_REG_5,
+	BPF_REG_6,
+	BPF_REG_7,
+	BPF_REG_8,
+	BPF_REG_9,
+	BPF_REG_10,
+	__MAX_BPF_REG,
+};
+
+/* BPF has 10 general purpose 64-bit registers and stack frame. */
+#define MAX_BPF_REG	__MAX_BPF_REG
+
+struct bpf_insn {
+	__u8	code;		/* opcode */
+	__u8	dst_reg:4;	/* dest register */
+	__u8	src_reg:4;	/* source register */
+	__s16	off;		/* signed offset */
+	__s32	imm;		/* signed immediate constant */
+};
+
+#endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index b54bb2c2e494..2c2bfaacce66 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -242,6 +242,7 @@ static unsigned int __bpf_prog_run(void *ctx, const struct bpf_insn *insn)
 		[BPF_LD | BPF_IND | BPF_W] = &&LD_IND_W,
 		[BPF_LD | BPF_IND | BPF_H] = &&LD_IND_H,
 		[BPF_LD | BPF_IND | BPF_B] = &&LD_IND_B,
+		[BPF_LD | BPF_IMM | BPF_DW] = &&LD_IMM_DW,
 	};
 	void *ptr;
 	int off;
@@ -301,6 +302,10 @@ select_insn:
 	ALU64_MOV_K:
 		DST = IMM;
 		CONT;
+	LD_IMM_DW:
+		DST = (u64) (u32) insn[0].imm | ((u64) (u32) insn[1].imm) << 32;
+		insn++;
+		CONT;
 	ALU64_ARSH_X:
 		(*(s64 *) &DST) >>= SRC;
 		CONT;
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 9a67456ba29a..413890815d3e 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -1735,6 +1735,27 @@ static struct bpf_test tests[] = {
 		{ },
 		{ { 1, 0 } },
 	},
+	{
+		"load 64-bit immediate",
+		.u.insns_int = {
+			BPF_LD_IMM64(R1, 0x567800001234L),
+			BPF_MOV64_REG(R2, R1),
+			BPF_MOV64_REG(R3, R2),
+			BPF_ALU64_IMM(BPF_RSH, R2, 32),
+			BPF_ALU64_IMM(BPF_LSH, R3, 32),
+			BPF_ALU64_IMM(BPF_RSH, R3, 32),
+			BPF_ALU64_IMM(BPF_MOV, R0, 0),
+			BPF_JMP_IMM(BPF_JEQ, R2, 0x5678, 1),
+			BPF_EXIT_INSN(),
+			BPF_JMP_IMM(BPF_JEQ, R3, 0x1234, 1),
+			BPF_EXIT_INSN(),
+			BPF_ALU64_IMM(BPF_MOV, R0, 1),
+			BPF_EXIT_INSN(),
+		},
+		INTERNAL,
+		{ },
+		{ { 0, 1 } }
+	},
 };
 
 static struct net_device dev;