diff options
author | James Courtier-Dutton <James@superbug.co.uk> | 2006-04-09 13:01:34 +0100 |
---|---|---|
committer | Jaroslav Kysela <perex@suse.cz> | 2006-06-22 21:32:35 +0200 |
commit | 6129daaa0d2b84c0e376b6b17b3d3740c4d1d1ca (patch) | |
tree | 8a043f22709ffa613f44a4bc1d3aeed256f488cf | |
parent | 52ab3f3dc711eeccbfbcc5d4f5c5d9b9ff59650f (diff) | |
download | linux-6129daaa0d2b84c0e376b6b17b3d3740c4d1d1ca.tar.bz2 |
[ALSA] ca0106: Add analog capture controls.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
-rw-r--r-- | sound/pci/ca0106/ca0106.h | 4 | ||||
-rw-r--r-- | sound/pci/ca0106/ca0106_main.c | 44 | ||||
-rw-r--r-- | sound/pci/ca0106/ca0106_mixer.c | 152 |
3 files changed, 186 insertions, 14 deletions
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h index c8131ea92ed6..9cb66c59f523 100644 --- a/sound/pci/ca0106/ca0106.h +++ b/sound/pci/ca0106/ca0106.h @@ -537,9 +537,9 @@ #endif #define ADC_MUX_MASK 0x0000000f //Mask for ADC Mux +#define ADC_MUX_PHONE 0x00000001 //Value to select TAD at ADC Mux (Not used) #define ADC_MUX_MIC 0x00000002 //Value to select Mic at ADC Mux #define ADC_MUX_LINEIN 0x00000004 //Value to select LineIn at ADC Mux -#define ADC_MUX_PHONE 0x00000001 //Value to select TAD at ADC Mux (Not used) #define ADC_MUX_AUX 0x00000008 //Value to select Aux at ADC Mux #define SET_CHANNEL 0 /* Testing channel outputs 0=Front, 1=Center/LFE, 2=Unknown, 3=Rear */ @@ -604,6 +604,8 @@ struct snd_ca0106 { u32 spdif_bits[4]; /* s/pdif out setup */ int spdif_enable; int capture_source; + int i2c_capture_source; + u8 i2c_capture_volume[4][2]; int capture_mic_line_in; struct snd_dma_buffer buffer; diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index fd8bfebfbd54..3762f58384e0 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -326,6 +326,7 @@ int snd_ca0106_spi_write(struct snd_ca0106 * emu, return 0; } +/* The ADC does not support i2c read, so only write is implemented */ int snd_ca0106_i2c_write(struct snd_ca0106 *emu, u32 reg, u32 value) @@ -340,6 +341,7 @@ int snd_ca0106_i2c_write(struct snd_ca0106 *emu, } tmp = reg << 25 | value << 16; + // snd_printk("I2C-write:reg=0x%x, value=0x%x\n", reg, value); /* Not sure what this I2C channel controls. */ /* snd_ca0106_ptr_write(emu, I2C_D0, 0, tmp); */ @@ -348,8 +350,9 @@ int snd_ca0106_i2c_write(struct snd_ca0106 *emu, for (retry = 0; retry < 10; retry++) { /* Send the data to i2c */ - tmp = snd_ca0106_ptr_read(emu, I2C_A, 0); - tmp = tmp & ~(I2C_A_ADC_READ|I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD_MASK); + //tmp = snd_ca0106_ptr_read(emu, I2C_A, 0); + //tmp = tmp & ~(I2C_A_ADC_READ|I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD_MASK); + tmp = 0; tmp = tmp | (I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD); snd_ca0106_ptr_write(emu, I2C_A, 0, tmp); @@ -1200,6 +1203,22 @@ static unsigned int spi_dac_init[] = { 0x1400, }; +static unsigned int i2c_adc_init[][2] = { + { 0x17, 0x00 }, /* Reset */ + { 0x07, 0x00 }, /* Timeout */ + { 0x0b, 0x22 }, /* Interface control */ + { 0x0c, 0x22 }, /* Master mode control */ + { 0x0d, 0x08 }, /* Powerdown control */ + { 0x0e, 0xcf }, /* Attenuation Left 0x01 = -103dB, 0xff = 24dB */ + { 0x0f, 0xcf }, /* Attenuation Right 0.5dB steps */ + { 0x10, 0x7b }, /* ALC Control 1 */ + { 0x11, 0x00 }, /* ALC Control 2 */ + { 0x12, 0x32 }, /* ALC Control 3 */ + { 0x13, 0x00 }, /* Noise gate control */ + { 0x14, 0xa6 }, /* Limiter control */ + { 0x15, ADC_MUX_LINEIN }, /* ADC Mixer control */ +}; + static int __devinit snd_ca0106_create(struct snd_card *card, struct pci_dev *pci, struct snd_ca0106 **rchip) @@ -1361,7 +1380,12 @@ static int __devinit snd_ca0106_create(struct snd_card *card, snd_ca0106_ptr_write(chip, CAPTURE_SOURCE, 0x0, 0x333300e4); /* Select MIC, Line in, TAD in, AUX in */ chip->capture_source = 3; /* Set CAPTURE_SOURCE */ - if (chip->details->gpio_type == 1) { /* The SB0410 and SB0413 use GPIO differently. */ + if (chip->details->gpio_type == 2) { /* The SB0410 and SB0413 use GPIO differently. */ + /* FIXME: Still need to find out what the other GPIO bits do. E.g. For digital spdif out. */ + outl(0x0, chip->port+GPIO); + //outl(0x00f0e000, chip->port+GPIO); /* Analog */ + outl(0x005f5301, chip->port+GPIO); /* Analog */ + } else if (chip->details->gpio_type == 1) { /* The SB0410 and SB0413 use GPIO differently. */ /* FIXME: Still need to find out what the other GPIO bits do. E.g. For digital spdif out. */ outl(0x0, chip->port+GPIO); //outl(0x00f0e000, chip->port+GPIO); /* Analog */ @@ -1379,7 +1403,19 @@ static int __devinit snd_ca0106_create(struct snd_card *card, outl(HCFG_AC97 | HCFG_AUDIOENABLE, chip->port+HCFG); /* AC97 2.0, Enable outputs. */ if (chip->details->i2c_adc == 1) { /* The SB0410 and SB0413 use I2C to control ADC. */ - snd_ca0106_i2c_write(chip, ADC_MUX, ADC_MUX_LINEIN); /* Enable Line-in capture. MIC in currently untested. */ + int size, n; + + size = ARRAY_SIZE(i2c_adc_init); + //snd_printk("I2C:array size=0x%x\n", size); + for (n=0; n < size; n++) { + snd_ca0106_i2c_write(chip, i2c_adc_init[n][0], i2c_adc_init[n][1]); + } + for (n=0; n < 4; n++) { + chip->i2c_capture_volume[n][0]= 0xcf; + chip->i2c_capture_volume[n][1]= 0xcf; + } + chip->i2c_capture_source=2; /* Line in */ + //snd_ca0106_i2c_write(chip, ADC_MUX, ADC_MUX_LINEIN); /* Enable Line-in capture. MIC in currently untested. */ } if (chip->details->spi_dac == 1) { /* The SB0570 use SPI to control DAC. */ int size, n; diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c index 06fe055674fb..8a5833317b0a 100644 --- a/sound/pci/ca0106/ca0106_mixer.c +++ b/sound/pci/ca0106/ca0106_mixer.c @@ -171,6 +171,62 @@ static int snd_ca0106_capture_source_put(struct snd_kcontrol *kcontrol, return change; } +static int snd_ca0106_i2c_capture_source_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static char *texts[6] = { + "Phone", "Mic", "Line in", "Aux" + }; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 4; + if (uinfo->value.enumerated.item > 3) + uinfo->value.enumerated.item = 3; + strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); + return 0; +} + +static int snd_ca0106_i2c_capture_source_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol); + + ucontrol->value.enumerated.item[0] = emu->i2c_capture_source; + return 0; +} + +static int snd_ca0106_i2c_capture_source_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol); + unsigned int source_id; + unsigned int ngain, ogain; + int change = 0; + u32 source; + /* If the capture source has changed, + * update the capture volume from the cached value + * for the particular source. + */ + source_id = ucontrol->value.enumerated.item[0] ; + change = (emu->i2c_capture_source != source_id); + if (change) { + snd_ca0106_i2c_write(emu, ADC_MUX, 0); /* Mute input */ + ngain = emu->i2c_capture_volume[source_id][0]; /* Left */ + ogain = emu->i2c_capture_volume[emu->i2c_capture_source][0]; /* Left */ + if (ngain != ogain) + snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCL, ((ngain) & 0xff)); + ngain = emu->i2c_capture_volume[source_id][1]; /* Left */ + ogain = emu->i2c_capture_volume[emu->i2c_capture_source][1]; /* Left */ + if (ngain != ogain) + snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCR, ((ngain) & 0xff)); + source = 1 << source_id; + snd_ca0106_i2c_write(emu, ADC_MUX, source); /* Set source */ + emu->i2c_capture_source = source_id; + } + return change; +} + static int snd_ca0106_capture_mic_line_in_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { @@ -207,16 +263,16 @@ static int snd_ca0106_capture_mic_line_in_put(struct snd_kcontrol *kcontrol, if (change) { emu->capture_mic_line_in = val; if (val) { - snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_PHONE); /* Mute input */ + //snd_ca0106_i2c_write(emu, ADC_MUX, 0); /* Mute input */ tmp = inl(emu->port+GPIO) & ~0x400; tmp = tmp | 0x400; outl(tmp, emu->port+GPIO); - snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_MIC); + //snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_MIC); } else { - snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_PHONE); /* Mute input */ + //snd_ca0106_i2c_write(emu, ADC_MUX, 0); /* Mute input */ tmp = inl(emu->port+GPIO) & ~0x400; outl(tmp, emu->port+GPIO); - snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_LINEIN); + //snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_LINEIN); } } return change; @@ -225,7 +281,7 @@ static int snd_ca0106_capture_mic_line_in_put(struct snd_kcontrol *kcontrol, static struct snd_kcontrol_new snd_ca0106_capture_mic_line_in __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Mic/Line in Capture", + .name = "Shared Mic/Line in Capture Switch", .info = snd_ca0106_capture_mic_line_in_info, .get = snd_ca0106_capture_mic_line_in_get, .put = snd_ca0106_capture_mic_line_in_put @@ -329,15 +385,81 @@ static int snd_ca0106_volume_put(struct snd_kcontrol *kcontrol, return 1; } +static int snd_ca0106_i2c_volume_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 255; + return 0; +} + +static int snd_ca0106_i2c_volume_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol); + int source_id; + + source_id = kcontrol->private_value; + + ucontrol->value.integer.value[0] = emu->i2c_capture_volume[source_id][0]; + ucontrol->value.integer.value[1] = emu->i2c_capture_volume[source_id][1]; + return 0; +} + +static int snd_ca0106_i2c_volume_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol); + unsigned int ogain; + unsigned int ngain; + int source_id; + int change = 0; + + source_id = kcontrol->private_value; + ogain = emu->i2c_capture_volume[source_id][0]; /* Left */ + ngain = ucontrol->value.integer.value[0]; + if (ngain > 0xff) + return 0; + if (ogain != ngain) { + if (emu->i2c_capture_source == source_id) + snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCL, ((ngain) & 0xff) ); + emu->i2c_capture_volume[source_id][0] = ucontrol->value.integer.value[0]; + change = 1; + } + ogain = emu->i2c_capture_volume[source_id][1]; /* Right */ + ngain = ucontrol->value.integer.value[1]; + if (ngain > 0xff) + return 0; + if (ogain != ngain) { + if (emu->i2c_capture_source == source_id) + snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCR, ((ngain) & 0xff)); + emu->i2c_capture_volume[source_id][1] = ucontrol->value.integer.value[1]; + change = 1; + } + + return change; +} + #define CA_VOLUME(xname,chid,reg) \ { \ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ - .info = snd_ca0106_volume_info, \ - .get = snd_ca0106_volume_get, \ - .put = snd_ca0106_volume_put, \ + .info = snd_ca0106_volume_info, \ + .get = snd_ca0106_volume_get, \ + .put = snd_ca0106_volume_put, \ .private_value = ((chid) << 8) | (reg) \ } +#define I2C_VOLUME(xname,chid) \ +{ \ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_ca0106_i2c_volume_info, \ + .get = snd_ca0106_i2c_volume_get, \ + .put = snd_ca0106_i2c_volume_put, \ + .private_value = chid \ +} + static struct snd_kcontrol_new snd_ca0106_volume_ctls[] __devinitdata = { CA_VOLUME("Analog Front Playback Volume", @@ -361,6 +483,11 @@ static struct snd_kcontrol_new snd_ca0106_volume_ctls[] __devinitdata = { CA_VOLUME("CAPTURE feedback Playback Volume", 1, CAPTURE_CONTROL), + I2C_VOLUME("Phone Capture Volume", 0), + I2C_VOLUME("Mic Capture Volume", 1), + I2C_VOLUME("Line in Capture Volume", 2), + I2C_VOLUME("Aux Capture Volume", 3), + { .access = SNDRV_CTL_ELEM_ACCESS_READ, .iface = SNDRV_CTL_ELEM_IFACE_PCM, @@ -378,12 +505,19 @@ static struct snd_kcontrol_new snd_ca0106_volume_ctls[] __devinitdata = { }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Capture Source", + .name = "Digital Capture Source", .info = snd_ca0106_capture_source_info, .get = snd_ca0106_capture_source_get, .put = snd_ca0106_capture_source_put }, { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Capture Source", + .info = snd_ca0106_i2c_capture_source_info, + .get = snd_ca0106_i2c_capture_source_get, + .put = snd_ca0106_i2c_capture_source_put + }, + { .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .count = 4, |