Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Highlights:

   - ARM64 support for ACPI host bridges

   - new drivers for Axis ARTPEC-6 and Marvell Aardvark

   - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx

   - pci_resource_to_user() cleanup (more to come)

  Detailed summary:

  Enumeration:
   - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
   - Add parent device field to ECAM struct pci_config_window (Jayachandran C)
   - Add generic MCFG table handling (Tomasz Nowicki)
   - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
   - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)

  Resource management:
   - Add devm_request_pci_bus_resources() (Bjorn Helgaas)
   - Unify pci_resource_to_user() declarations (Bjorn Helgaas)
   - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
   - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
   - Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
   - Ignore write combining when mapping I/O port space (Bjorn Helgaas)
   - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
   - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
   - Support I/O resources when parsing host bridge resources (Jayachandran C)
   - Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
   - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
   - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
   - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
   - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
   - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
   - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
   - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)

  PCI device hotplug:
   - Allow additional bus numbers for hotplug bridges (Keith Busch)
   - Ignore interrupts during D3cold (Lukas Wunner)

  Power management:
   - Enforce type casting for pci_power_t (Andy Shevchenko)
   - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
   - Put PCIe ports into D3 during suspend (Mika Westerberg)
   - Power on bridges before scanning new devices (Mika Westerberg)
   - Runtime resume bridge before rescan (Mika Westerberg)
   - Add runtime PM support for PCIe ports (Mika Westerberg)
   - Remove redundant check of pcie_set_clkpm (Shawn Lin)

  Virtualization:
   - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
   - Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
   - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
   - Add ACS quirk for Solarflare SFC9220 (Edward Cree)

  MSI:
   - Fix PCI_MSI dependencies (Arnd Bergmann)
   - Add pci_msix_desc_addr() helper (Christoph Hellwig)
   - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
   - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
   - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
   - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)

  Error Handling:
   - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
   - Remove DPC tristate module option (Keith Busch)
   - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)

  Generic host bridge driver:
   - Select IRQ_DOMAIN (Arnd Bergmann)
   - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)

  ACPI host bridge driver:
   - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
   - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
   - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
   - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)

  Altera host bridge driver:
   - Check link status before retrain link (Ley Foon Tan)
   - Poll for link up status after retraining the link (Ley Foon Tan)

  Axis ARTPEC-6 host bridge driver:
   - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
   - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
   - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)

  Intel VMD host bridge driver:
   - Use lock save/restore in interrupt enable path (Jon Derrick)
   - Select device dma ops to override (Keith Busch)
   - Initialize list item in IRQ disable (Keith Busch)
   - Use x86_vector_domain as parent domain (Keith Busch)
   - Separate MSI and MSI-X vector sharing (Keith Busch)

  Marvell Aardvark host bridge driver:
   - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
   - Add Aardvark PCI host controller driver (Thomas Petazzoni)
   - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)

  Microsoft Hyper-V host bridge driver:
   - Fix interrupt cleanup path (Cathy Avery)
   - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
   - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)

  NVIDIA Tegra host bridge driver:
   - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
   - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
   - Use lower-case hex consistently for register definitions (Thierry Reding)
   - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
   - Stop setting pcibios_min_mem (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Drop gen2 dummy I/O port region (Bjorn Helgaas)

  TI DRA7xx host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Xilinx AXI host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Miscellaneous:
   - Make bus_attr_resource_alignment static (Ben Dooks)
   - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
   - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
   - Make host bridge drivers explicitly non-modular (Paul Gortmaker)"

* tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits)
  PCI: xgene: Make explicitly non-modular
  PCI: thunder-pem: Make explicitly non-modular
  PCI: thunder-ecam: Make explicitly non-modular
  PCI: tegra: Make explicitly non-modular
  PCI: rcar-gen2: Make explicitly non-modular
  PCI: rcar: Make explicitly non-modular
  PCI: mvebu: Make explicitly non-modular
  PCI: layerscape: Make explicitly non-modular
  PCI: keystone: Make explicitly non-modular
  PCI: hisi: Make explicitly non-modular
  PCI: generic: Make explicitly non-modular
  PCI: designware-plat: Make it explicitly non-modular
  PCI: artpec6: Make explicitly non-modular
  PCI: armada8k: Make explicitly non-modular
  PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
  PCI: Add ACS quirk for Solarflare SFC9220
  arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
  PCI: aardvark: Add Aardvark PCI host controller driver
  dt-bindings: add DT binding for the Aardvark PCIe controller
  PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
  ...

87 files changed, 3014 insertions, 1176 deletions

diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index 1179850f453c..c55df2911136 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -78,422 +78,111 @@ CONFIG_PCI_MSI option.
 
 4.2 Using MSI
 
-Most of the hard work is done for the driver in the PCI layer.  It simply
-has to request that the PCI layer set up the MSI capability for this
+Most of the hard work is done for the driver in the PCI layer.  The driver
+simply has to request that the PCI layer set up the MSI capability for this
 device.
 
-4.2.1 pci_enable_msi
+To automatically use MSI or MSI-X interrupt vectors, use the following
+function:
 
-int pci_enable_msi(struct pci_dev *dev)
+  int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
+		unsigned int max_vecs, unsigned int flags);
 
-A successful call allocates ONE interrupt to the device, regardless
-of how many MSIs the device supports.  The device is switched from
-pin-based interrupt mode to MSI mode.  The dev->irq number is changed
-to a new number which represents the message signaled interrupt;
-consequently, this function should be called before the driver calls
-request_irq(), because an MSI is delivered via a vector that is
-different from the vector of a pin-based interrupt.
+which allocates up to max_vecs interrupt vectors for a PCI device.  It
+returns the number of vectors allocated or a negative error.  If the device
+has a requirements for a minimum number of vectors the driver can pass a
+min_vecs argument set to this limit, and the PCI core will return -ENOSPC
+if it can't meet the minimum number of vectors.
 
-4.2.2 pci_enable_msi_range
+The flags argument should normally be set to 0, but can be used to pass the
+PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support
+MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in
+case the device does not support legacy interrupt lines.
 
-int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
+By default this function will spread the interrupts around the available
+CPUs, but this feature can be disabled by passing the PCI_IRQ_NOAFFINITY
+flag.
 
-This function allows a device driver to request any number of MSI
-interrupts within specified range from 'minvec' to 'maxvec'.
+To get the Linux IRQ numbers passed to request_irq() and free_irq() and the
+vectors, use the following function:
 
-If this function returns a positive number it indicates the number of
-MSI interrupts that have been successfully allocated.  In this case
-the device is switched from pin-based interrupt mode to MSI mode and
-updates dev->irq to be the lowest of the new interrupts assigned to it.
-The other interrupts assigned to the device are in the range dev->irq
-to dev->irq + returned value - 1.  Device driver can use the returned
-number of successfully allocated MSI interrupts to further allocate
-and initialize device resources.
+  int pci_irq_vector(struct pci_dev *dev, unsigned int nr);
 
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to request any more MSI interrupts for
-this device.
+Any allocated resources should be freed before removing the device using
+the following function:
 
-This function should be called before the driver calls request_irq(),
-because MSI interrupts are delivered via vectors that are different
-from the vector of a pin-based interrupt.
+  void pci_free_irq_vectors(struct pci_dev *dev);
 
-It is ideal if drivers can cope with a variable number of MSI interrupts;
-there are many reasons why the platform may not be able to provide the
-exact number that a driver asks for.
+If a device supports both MSI-X and MSI capabilities, this API will use the
+MSI-X facilities in preference to the MSI facilities.  MSI-X supports any
+number of interrupts between 1 and 2048.  In contrast, MSI is restricted to
+a maximum of 32 interrupts (and must be a power of two).  In addition, the
+MSI interrupt vectors must be allocated consecutively, so the system might
+not be able to allocate as many vectors for MSI as it could for MSI-X.  On
+some platforms, MSI interrupts must all be targeted at the same set of CPUs
+whereas MSI-X interrupts can all be targeted at different CPUs.
 
-There could be devices that can not operate with just any number of MSI
-interrupts within a range.  See chapter 4.3.1.3 to get the idea how to
-handle such devices for MSI-X - the same logic applies to MSI.
+If a device supports neither MSI-X or MSI it will fall back to a single
+legacy IRQ vector.
 
-4.2.1.1 Maximum possible number of MSI interrupts
+The typical usage of MSI or MSI-X interrupts is to allocate as many vectors
+as possible, likely up to the limit supported by the device.  If nvec is
+larger than the number supported by the device it will automatically be
+capped to the supported limit, so there is no need to query the number of
+vectors supported beforehand:
 
-The typical usage of MSI interrupts is to allocate as many vectors as
-possible, likely up to the limit returned by pci_msi_vec_count() function:
-
-static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
-{
-	return pci_enable_msi_range(pdev, 1, nvec);
-}
-
-Note the value of 'minvec' parameter is 1.  As 'minvec' is inclusive,
-the value of 0 would be meaningless and could result in error.
-
-Some devices have a minimal limit on number of MSI interrupts.
-In this case the function could look like this:
-
-static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
-{
-	return pci_enable_msi_range(pdev, FOO_DRIVER_MINIMUM_NVEC, nvec);
-}
-
-4.2.1.2 Exact number of MSI interrupts
+	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, 0);
+	if (nvec < 0)
+		goto out_err;
 
 If a driver is unable or unwilling to deal with a variable number of MSI
-interrupts it could request a particular number of interrupts by passing
-that number to pci_enable_msi_range() function as both 'minvec' and 'maxvec'
-parameters:
-
-static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
-{
-	return pci_enable_msi_range(pdev, nvec, nvec);
-}
-
-Note, unlike pci_enable_msi_exact() function, which could be also used to
-enable a particular number of MSI-X interrupts, pci_enable_msi_range()
-returns either a negative errno or 'nvec' (not negative errno or 0 - as
-pci_enable_msi_exact() does).
-
-4.2.1.3 Single MSI mode
-
-The most notorious example of the request type described above is
-enabling the single MSI mode for a device.  It could be done by passing
-two 1s as 'minvec' and 'maxvec':
-
-static int foo_driver_enable_single_msi(struct pci_dev *pdev)
-{
-	return pci_enable_msi_range(pdev, 1, 1);
-}
-
-Note, unlike pci_enable_msi() function, which could be also used to
-enable the single MSI mode, pci_enable_msi_range() returns either a
-negative errno or 1 (not negative errno or 0 - as pci_enable_msi()
-does).
-
-4.2.3 pci_enable_msi_exact
-
-int pci_enable_msi_exact(struct pci_dev *dev, int nvec)
-
-This variation on pci_enable_msi_range() call allows a device driver to
-request exactly 'nvec' MSIs.
-
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to request any more MSI interrupts for
-this device.
-
-By contrast with pci_enable_msi_range() function, pci_enable_msi_exact()
-returns zero in case of success, which indicates MSI interrupts have been
-successfully allocated.
-
-4.2.4 pci_disable_msi
-
-void pci_disable_msi(struct pci_dev *dev)
-
-This function should be used to undo the effect of pci_enable_msi_range().
-Calling it restores dev->irq to the pin-based interrupt number and frees
-the previously allocated MSIs.  The interrupts may subsequently be assigned
-to another device, so drivers should not cache the value of dev->irq.
-
-Before calling this function, a device driver must always call free_irq()
-on any interrupt for which it previously called request_irq().
-Failure to do so results in a BUG_ON(), leaving the device with
-MSI enabled and thus leaking its vector.
-
-4.2.4 pci_msi_vec_count
-
-int pci_msi_vec_count(struct pci_dev *dev)
-
-This function could be used to retrieve the number of MSI vectors the
-device requested (via the Multiple Message Capable register). The MSI
-specification only allows the returned value to be a power of two,
-up to a maximum of 2^5 (32).
-
-If this function returns a negative number, it indicates the device is
-not capable of sending MSIs.
-
-If this function returns a positive number, it indicates the maximum
-number of MSI interrupt vectors that could be allocated.
-
-4.3 Using MSI-X
-
-The MSI-X capability is much more flexible than the MSI capability.
-It supports up to 2048 interrupts, each of which can be controlled
-independently.  To support this flexibility, drivers must use an array of
-`struct msix_entry':
-
-struct msix_entry {
-	u16 	vector; /* kernel uses to write alloc vector */
-	u16	entry; /* driver uses to specify entry */
-};
-
-This allows for the device to use these interrupts in a sparse fashion;
-for example, it could use interrupts 3 and 1027 and yet allocate only a
-two-element array.  The driver is expected to fill in the 'entry' value
-in each element of the array to indicate for which entries the kernel
-should assign interrupts; it is invalid to fill in two entries with the
-same number.
-
-4.3.1 pci_enable_msix_range
-
-int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
-			  int minvec, int maxvec)
-
-Calling this function asks the PCI subsystem to allocate any number of
-MSI-X interrupts within specified range from 'minvec' to 'maxvec'.
-The 'entries' argument is a pointer to an array of msix_entry structs
-which should be at least 'maxvec' entries in size.
-
-On success, the device is switched into MSI-X mode and the function
-returns the number of MSI-X interrupts that have been successfully
-allocated.  In this case the 'vector' member in entries numbered from
-0 to the returned value - 1 is populated with the interrupt number;
-the driver should then call request_irq() for each 'vector' that it
-decides to use.  The device driver is responsible for keeping track of the
-interrupts assigned to the MSI-X vectors so it can free them again later.
-Device driver can use the returned number of successfully allocated MSI-X
-interrupts to further allocate and initialize device resources.
-
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to allocate any more MSI-X interrupts for
-this device.
-
-This function, in contrast with pci_enable_msi_range(), does not adjust
-dev->irq.  The device will not generate interrupts for this interrupt
-number once MSI-X is enabled.
-
-Device drivers should normally call this function once per device
-during the initialization phase.
-
-It is ideal if drivers can cope with a variable number of MSI-X interrupts;
-there are many reasons why the platform may not be able to provide the
-exact number that a driver asks for.
-
-There could be devices that can not operate with just any number of MSI-X
-interrupts within a range.  E.g., an network adapter might need let's say
-four vectors per each queue it provides.  Therefore, a number of MSI-X
-interrupts allocated should be a multiple of four.  In this case interface
-pci_enable_msix_range() can not be used alone to request MSI-X interrupts
-(since it can allocate any number within the range, without any notion of
-the multiple of four) and the device driver should master a custom logic
-to request the required number of MSI-X interrupts.
-
-4.3.1.1 Maximum possible number of MSI-X interrupts
-
-The typical usage of MSI-X interrupts is to allocate as many vectors as
-possible, likely up to the limit returned by pci_msix_vec_count() function:
-
-static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
-{
-	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
-				     1, nvec);
-}
-
-Note the value of 'minvec' parameter is 1.  As 'minvec' is inclusive,
-the value of 0 would be meaningless and could result in error.
-
-Some devices have a minimal limit on number of MSI-X interrupts.
-In this case the function could look like this:
-
-static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
-{
-	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
-				     FOO_DRIVER_MINIMUM_NVEC, nvec);
-}
-
-4.3.1.2 Exact number of MSI-X interrupts
-
-If a driver is unable or unwilling to deal with a variable number of MSI-X
-interrupts it could request a particular number of interrupts by passing
-that number to pci_enable_msix_range() function as both 'minvec' and 'maxvec'
-parameters:
-
-static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
-{
-	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
-				     nvec, nvec);
-}
-
-Note, unlike pci_enable_msix_exact() function, which could be also used to
-enable a particular number of MSI-X interrupts, pci_enable_msix_range()
-returns either a negative errno or 'nvec' (not negative errno or 0 - as
-pci_enable_msix_exact() does).
-
-4.3.1.3 Specific requirements to the number of MSI-X interrupts
-
-As noted above, there could be devices that can not operate with just any
-number of MSI-X interrupts within a range.  E.g., let's assume a device that
-is only capable sending the number of MSI-X interrupts which is a power of
-two.  A routine that enables MSI-X mode for such device might look like this:
-
-/*
- * Assume 'minvec' and 'maxvec' are non-zero
- */
-static int foo_driver_enable_msix(struct foo_adapter *adapter,
-				  int minvec, int maxvec)
-{
-	int rc;
-
-	minvec = roundup_pow_of_two(minvec);
-	maxvec = rounddown_pow_of_two(maxvec);
-
-	if (minvec > maxvec)
-		return -ERANGE;
-
-retry:
-	rc = pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
-				   maxvec, maxvec);
-	/*
-	 * -ENOSPC is the only error code allowed to be analyzed
-	 */
-	if (rc == -ENOSPC) {
-		if (maxvec == 1)
-			return -ENOSPC;
-
-		maxvec /= 2;
-
-		if (minvec > maxvec)
-			return -ENOSPC;
-
-		goto retry;
-	}
-
-	return rc;
-}
-
-Note how pci_enable_msix_range() return value is analyzed for a fallback -
-any error code other than -ENOSPC indicates a fatal error and should not
-be retried.
-
-4.3.2 pci_enable_msix_exact
-
-int pci_enable_msix_exact(struct pci_dev *dev,
-			  struct msix_entry *entries, int nvec)
-
-This variation on pci_enable_msix_range() call allows a device driver to
-request exactly 'nvec' MSI-Xs.
-
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to allocate any more MSI-X interrupts for
-this device.
-
-By contrast with pci_enable_msix_range() function, pci_enable_msix_exact()
-returns zero in case of success, which indicates MSI-X interrupts have been
-successfully allocated.
-
-Another version of a routine that enables MSI-X mode for a device with
-specific requirements described in chapter 4.3.1.3 might look like this:
-
-/*
- * Assume 'minvec' and 'maxvec' are non-zero
- */
-static int foo_driver_enable_msix(struct foo_adapter *adapter,
-				  int minvec, int maxvec)
-{
-	int rc;
-
-	minvec = roundup_pow_of_two(minvec);
-	maxvec = rounddown_pow_of_two(maxvec);
-
-	if (minvec > maxvec)
-		return -ERANGE;
-
-retry:
-	rc = pci_enable_msix_exact(adapter->pdev,
-				   adapter->msix_entries, maxvec);
-
-	/*
-	 * -ENOSPC is the only error code allowed to be analyzed
-	 */
-	if (rc == -ENOSPC) {
-		if (maxvec == 1)
-			return -ENOSPC;
-
-		maxvec /= 2;
-
-		if (minvec > maxvec)
-			return -ENOSPC;
-
-		goto retry;
-	} else if (rc < 0) {
-		return rc;
-	}
-
-	return maxvec;
-}
-
-4.3.3 pci_disable_msix
-
-void pci_disable_msix(struct pci_dev *dev)
-
-This function should be used to undo the effect of pci_enable_msix_range().
-It frees the previously allocated MSI-X interrupts. The interrupts may
-subsequently be assigned to another device, so drivers should not cache
-the value of the 'vector' elements over a call to pci_disable_msix().
-
-Before calling this function, a device driver must always call free_irq()
-on any interrupt for which it previously called request_irq().
-Failure to do so results in a BUG_ON(), leaving the device with
-MSI-X enabled and thus leaking its vector.
-
-4.3.3 The MSI-X Table
-
-The MSI-X capability specifies a BAR and offset within that BAR for the
-MSI-X Table.  This address is mapped by the PCI subsystem, and should not
-be accessed directly by the device driver.  If the driver wishes to
-mask or unmask an interrupt, it should call disable_irq() / enable_irq().
+interrupts it can request a particular number of interrupts by passing that
+number to pci_alloc_irq_vectors() function as both 'min_vecs' and
+'max_vecs' parameters:
 
-4.3.4 pci_msix_vec_count
+	ret = pci_alloc_irq_vectors(pdev, nvec, nvec, 0);
+	if (ret < 0)
+		goto out_err;
 
-int pci_msix_vec_count(struct pci_dev *dev)
+The most notorious example of the request type described above is enabling
+the single MSI mode for a device.  It could be done by passing two 1s as
+'min_vecs' and 'max_vecs':
 
-This function could be used to retrieve number of entries in the device
-MSI-X table.
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, 0);
+	if (ret < 0)
+		goto out_err;
 
-If this function returns a negative number, it indicates the device is
-not capable of sending MSI-Xs.
+Some devices might not support using legacy line interrupts, in which case
+the PCI_IRQ_NOLEGACY flag can be used to fail the request if the platform
+can't provide MSI or MSI-X interrupts:
 
-If this function returns a positive number, it indicates the maximum
-number of MSI-X interrupt vectors that could be allocated.
+	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_NOLEGACY);
+	if (nvec < 0)
+		goto out_err;
 
-4.4 Handling devices implementing both MSI and MSI-X capabilities
+4.3 Legacy APIs
 
-If a device implements both MSI and MSI-X capabilities, it can
-run in either MSI mode or MSI-X mode, but not both simultaneously.
-This is a requirement of the PCI spec, and it is enforced by the
-PCI layer.  Calling pci_enable_msi_range() when MSI-X is already
-enabled or pci_enable_msix_range() when MSI is already enabled
-results in an error.  If a device driver wishes to switch between MSI
-and MSI-X at runtime, it must first quiesce the device, then switch
-it back to pin-interrupt mode, before calling pci_enable_msi_range()
-or pci_enable_msix_range() and resuming operation.  This is not expected
-to be a common operation but may be useful for debugging or testing
-during development.
+The following old APIs to enable and disable MSI or MSI-X interrupts should
+not be used in new code:
 
-4.5 Considerations when using MSIs
+  pci_enable_msi()		/* deprecated */
+  pci_enable_msi_range()	/* deprecated */
+  pci_enable_msi_exact()	/* deprecated */
+  pci_disable_msi()		/* deprecated */
+  pci_enable_msix_range()	/* deprecated */
+  pci_enable_msix_exact()	/* deprecated */
+  pci_disable_msix()		/* deprecated */
 
-4.5.1 Choosing between MSI-X and MSI
+Additionally there are APIs to provide the number of supported MSI or MSI-X
+vectors: pci_msi_vec_count() and pci_msix_vec_count().  In general these
+should be avoided in favor of letting pci_alloc_irq_vectors() cap the
+number of vectors.  If you have a legitimate special use case for the count
+of vectors we might have to revisit that decision and add a
+pci_nr_irq_vectors() helper that handles MSI and MSI-X transparently.
 
-If your device supports both MSI-X and MSI capabilities, you should use
-the MSI-X facilities in preference to the MSI facilities.  As mentioned
-above, MSI-X supports any number of interrupts between 1 and 2048.
-In contrast, MSI is restricted to a maximum of 32 interrupts (and
-must be a power of two).  In addition, the MSI interrupt vectors must
-be allocated consecutively, so the system might not be able to allocate
-as many vectors for MSI as it could for MSI-X.  On some platforms, MSI
-interrupts must all be targeted at the same set of CPUs whereas MSI-X
-interrupts can all be targeted at different CPUs.
+4.4 Considerations when using MSIs
 
-4.5.2 Spinlocks
+4.4.1 Spinlocks
 
 Most device drivers have a per-device spinlock which is taken in the
 interrupt handler.  With pin-based interrupts or a single MSI, it is not
@@ -505,7 +194,7 @@ acquire the spinlock.  Such deadlocks can be avoided by using
 spin_lock_irqsave() or spin_lock_irq() which disable local interrupts
 and acquire the lock (see Documentation/DocBook/kernel-locking).
 
-4.6 How to tell whether MSI/MSI-X is enabled on a device
+4.5 How to tell whether MSI/MSI-X is enabled on a device
 
 Using 'lspci -v' (as root) may show some devices with "MSI", "Message
 Signalled Interrupts" or "MSI-X" capabilities.  Each of these capabilities
diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
new file mode 100644
index 000000000000..bbcd9f4c501f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -0,0 +1,56 @@
+Aardvark PCIe controller
+
+This PCIe controller is used on the Marvell Armada 3700 ARM64 SoC.
+
+The Device Tree node describing an Aardvark PCIe controller must
+contain the following properties:
+
+ - compatible: Should be "marvell,armada-3700-pcie"
+ - reg: range of registers for the PCIe controller
+ - interrupts: the interrupt line of the PCIe controller
+ - #address-cells: set to <3>
+ - #size-cells: set to <2>
+ - device_type: set to "pci"
+ - ranges: ranges for the PCI memory and I/O regions
+ - #interrupt-cells: set to <1>
+ - msi-controller: indicates that the PCIe controller can itself
+   handle MSI interrupts
+ - msi-parent: pointer to the MSI controller to be used
+ - interrupt-map-mask and interrupt-map: standard PCI properties to
+   define the mapping of the PCIe interface to interrupt numbers.
+ - bus-range: PCI bus numbers covered
+
+In addition, the Device Tree describing an Aardvark PCIe controller
+must include a sub-node that describes the legacy interrupt controller
+built into the PCIe controller. This sub-node must have the following
+properties:
+
+ - interrupt-controller
+ - #interrupt-cells: set to <1>
+
+Example:
+
+	pcie0: pcie@d0070000 {
+		compatible = "marvell,armada-3700-pcie";
+		device_type = "pci";
+		status = "disabled";
+		reg = <0 0xd0070000 0 0x20000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <1>;
+		msi-controller;
+		msi-parent = <&pcie0>;
+		ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
+			  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
new file mode 100644
index 000000000000..330a45b5f0b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -0,0 +1,46 @@
+* Axis ARTPEC-6 PCIe interface
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: "axis,artpec6-pcie", "snps,dw-pcie"
+- reg: base addresses and lengths of the PCIe controller (DBI),
+	the phy controller, and configuration address space.
+- reg-names: Must include the following entries:
+	- "dbi"
+	- "phy"
+	- "config"
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+	- "msi": The interrupt that is asserted when an MSI is received
+- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller,
+	used to enable and control the Synopsys IP.
+
+Example:
+
+	pcie@f8050000 {
+		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x1000>;
+		reg-names = "dbi", "phy", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+			  /* downstream I/O */
+		ranges = <0x81000000 0 0x00010000 0xc0010000 0 0x00010000
+			  /* non-prefetchable memory */
+			  0x82000000 0 0xc0020000 0xc0020000 0 0x1ffe0000>;
+		num-lanes = <2>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		axis,syscon-pcie = <&syscon>;
+	};
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e24aa11e8f8a..642029012059 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3021,6 +3021,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		resource_alignment=
 				Format:
 				[<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
+				[<order of align>@]pci:<vendor>:<device>\
+						[:<subvendor>:<subdevice>][; ...]
 				Specifies alignment and device to reassign
 				aligned memory resources.
 				If <order of align> is not specified,
@@ -3039,6 +3041,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		hpmemsize=nn[KMG]	The fixed amount of bus space which is
 				reserved for hotplug bridge's memory window.
 				Default size is 2 megabytes.
+		hpbussize=nn	The minimum amount of additional bus numbers
+				reserved for buses below a hotplug bridge.
+				Default is 1.
 		realloc=	Enable/disable reallocating PCI bridge resources
 				if allocations done by BIOS are too small to
 				accommodate resources required by all child
@@ -3070,6 +3075,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		compat	Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
 			ports driver.
 
+	pcie_port_pm=	[PCIE] PCIe port power management handling:
+		off	Disable power management of all PCIe ports
+		force	Forcibly enable power management of all PCIe ports
+
 	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
 		nomsi	Do not use MSI for native PCIe PME signaling (this makes
 			all PCIe root ports use INTx for all services).
diff --git a/MAINTAINERS b/MAINTAINERS
index 8f950e2752de..10074ff03c57 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8883,6 +8883,7 @@ L:	linux-pci@vger.kernel.org
 Q:	http://patchwork.ozlabs.org/project/linux-pci/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
 S:	Supported
+F:	Documentation/devicetree/bindings/pci/
 F:	Documentation/PCI/
 F:	drivers/pci/
 F:	include/linux/pci*
@@ -8946,6 +8947,13 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/pci/host/*mvebu*
 
+PCI DRIVER FOR AARDVARK (Marvell Armada 3700)
+M:	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/pci/host/pci-aardvark.c
+
 PCI DRIVER FOR NVIDIA TEGRA
 M:	Thierry Reding <thierry.reding@gmail.com>
 L:	linux-tegra@vger.kernel.org
@@ -9028,6 +9036,15 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
 F:	drivers/pci/host/pci-xgene-msi.c
 
+PCIE DRIVER FOR AXIS ARTPEC
+M:	Niklas Cassel <niklas.cassel@axis.com>
+M:	Jesper Nilsson <jesper.nilsson@axis.com>
+L:	linux-arm-kernel@axis.com
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/axis,artpec*
+F:	drivers/pci/host/*artpec*
+
 PCIE DRIVER FOR HISILICON
 M:	Zhou Wang <wangzhou1@hisilicon.com>
 M:	Gabriele Paoloni <gabriele.paoloni@huawei.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fc3dc0b90be2..2d601d769a1c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -700,7 +700,7 @@ config ARCH_VIRT
 	depends on ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_GIC
-	select ARM_GIC_V2M if PCI_MSI
+	select ARM_GIC_V2M if PCI
 	select ARM_GIC_V3
 	select ARM_PSCI
 	select HAVE_ARM_ARCH_TIMER
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 0070e8520cd4..2d88af5be45f 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -22,6 +22,7 @@ struct hw_pci {
 	struct msi_controller *msi_ctrl;
 	struct pci_ops	*ops;
 	int		nr_controllers;
+	unsigned int	io_optional:1;
 	void		**private_data;
 	int		(*setup)(int nr, struct pci_sys_data *);
 	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 05e61a2eeabe..2f0e07735d1d 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -410,7 +410,8 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq;
 }
 
-static int pcibios_init_resources(int busnr, struct pci_sys_data *sys)
+static int pcibios_init_resource(int busnr, struct pci_sys_data *sys,
+				 int io_optional)
 {
 	int ret;
 	struct resource_entry *window;
@@ -420,6 +421,14 @@ static int pcibios_init_resources(int busnr, struct pci_sys_data *sys)
 			 &iomem_resource, sys->mem_offset);
 	}
 
+	/*
+	 * If a platform says I/O port support is optional, we don't add
+	 * the default I/O space.  The platform is responsible for adding
+	 * any I/O space it needs.
+	 */
+	if (io_optional)
+		return 0;
+
 	resource_list_for_each_entry(window, &sys->resources)
 		if (resource_type(window->res) == IORESOURCE_IO)
 			return 0;
@@ -466,7 +475,7 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 		if (ret > 0) {
 			struct pci_host_bridge *host_bridge;
 
-			ret = pcibios_init_resources(nr, sys);
+			ret = pcibios_init_resource(nr, sys, hw->io_optional);
 			if (ret)  {
 				kfree(sys);
 				break;
@@ -515,25 +524,23 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
 	list_for_each_entry(sys, &head, node) {
 		struct pci_bus *bus = sys->bus;
 
-		if (!pci_has_flag(PCI_PROBE_ONLY)) {
+		/*
+		 * We insert PCI resources into the iomem_resource and
+		 * ioport_resource trees in either pci_bus_claim_resources()
+		 * or pci_bus_assign_resources().
+		 */
+		if (pci_has_flag(PCI_PROBE_ONLY)) {
+			pci_bus_claim_resources(bus);
+		} else {
 			struct pci_bus *child;
 
-			/*
-			 * Size the bridge windows.
-			 */
 			pci_bus_size_bridges(bus);
-
-			/*
-			 * Assign resources.
-			 */
 			pci_bus_assign_resources(bus);
 
 			list_for_each_entry(child, &bus->children, node)
 				pcie_bus_configure_settings(child);
 		}
-		/*
-		 * Tell drivers about devices found.
-		 */
+
 		pci_bus_add_devices(bus);
 	}
 }
@@ -590,18 +597,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 	return start;
 }
 
-/**
- * pcibios_enable_device - Enable I/O and memory.
- * @dev: PCI device to be enabled
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	if (pci_has_flag(PCI_PROBE_ONLY))
-		return 0;
-
-	return pci_enable_resources(dev, mask);
-}
-
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			enum pci_mmap_state mmap_state, int write_combine)
 {
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1b06db571fff..69c8787bec7d 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -3,6 +3,7 @@ config ARM64
 	select ACPI_CCA_REQUIRED if ACPI
 	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+	select ACPI_MCFG if ACPI
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
@@ -22,9 +23,9 @@ config ARM64
 	select ARM_ARCH_TIMER
 	select ARM_GIC
 	select AUDIT_ARCH_COMPAT_GENERIC
-	select ARM_GIC_V2M if PCI_MSI
+	select ARM_GIC_V2M if PCI
 	select ARM_GIC_V3
-	select ARM_GIC_V3_ITS if PCI_MSI
+	select ARM_GIC_V3_ITS if PCI
 	select ARM_PSCI_FW
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
@@ -102,6 +103,7 @@ config ARM64
 	select OF_EARLY_FLATTREE
 	select OF_NUMA if NUMA && OF
 	select OF_RESERVED_MEM
+	select PCI_ECAM if ACPI
 	select PERF_USE_VMALLOC
 	select POWER_RESET
 	select POWER_SUPPLY
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 86110a6ae330..1372e9a6aaa4 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -76,3 +76,8 @@
 &usb3 {
 	status = "okay";
 };
+
+/* CON17 (PCIe) / CON12 (mini-PCIe) */
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index eb29280962d7..c4762538ec01 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -176,5 +176,30 @@
 				      <0x1d40000 0x40000>; /* GICR */
 			};
 		};
+
+		pcie0: pcie@d0070000 {
+			compatible = "marvell,armada-3700-pcie";
+			device_type = "pci";
+			status = "disabled";
+			reg = <0 0xd0070000 0 0x20000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			msi-parent = <&pcie0>;
+			msi-controller;
+			ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
+				  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			pcie_intc: interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
 	};
 };
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index 3c4e308b40a0..acf38722457b 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -17,6 +17,9 @@
 #include <linux/mm.h>
 #include <linux/of_pci.h>
 #include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
 #include <linux/slab.h>
 
 /*
@@ -36,25 +39,17 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 	return res->start;
 }
 
-/**
- * pcibios_enable_device - Enable I/O and memory.
- * @dev: PCI device to be enabled
- * @mask: bitmask of BARs to enable
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	if (pci_has_flag(PCI_PROBE_ONLY))
-		return 0;
-
-	return pci_enable_resources(dev, mask);
-}
-
 /*
- * Try to assign the IRQ number from DT when adding a new device
+ * Try to assign the IRQ number when probing a new device
  */
-int pcibios_add_device(struct pci_dev *dev)
+int pcibios_alloc_irq(struct pci_dev *dev)
 {
-	dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+	if (acpi_disabled)
+		dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+#ifdef CONFIG_ACPI
+	else
+		return acpi_pci_irq_enable(dev);
+#endif
 
 	return 0;
 }
@@ -65,13 +60,21 @@ int pcibios_add_device(struct pci_dev *dev)
 int raw_pci_read(unsigned int domain, unsigned int bus,
 		  unsigned int devfn, int reg, int len, u32 *val)
 {
-	return -ENXIO;
+	struct pci_bus *b = pci_find_bus(domain, bus);
+
+	if (!b)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	return b->ops->read(b, devfn, reg, len, val);
 }
 
 int raw_pci_write(unsigned int domain, unsigned int bus,
 		unsigned int devfn, int reg, int len, u32 val)
 {
-	return -ENXIO;
+	struct pci_bus *b = pci_find_bus(domain, bus);
+
+	if (!b)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	return b->ops->write(b, devfn, reg, len, val);
 }
 
 #ifdef CONFIG_NUMA
@@ -85,10 +88,124 @@ EXPORT_SYMBOL(pcibus_to_node);
 #endif
 
 #ifdef CONFIG_ACPI
-/* Root bridge scanning */
+
+struct acpi_pci_generic_root_info {
+	struct acpi_pci_root_info	common;
+	struct pci_config_window	*cfg;	/* config space mapping */
+};
+
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	struct acpi_device *adev = to_acpi_device(cfg->parent);
+	struct acpi_pci_root *root = acpi_driver_data(adev);
+
+	return root->segment;
+}
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	if (!acpi_disabled) {
+		struct pci_config_window *cfg = bridge->bus->sysdata;
+		struct acpi_device *adev = to_acpi_device(cfg->parent);
+		ACPI_COMPANION_SET(&bridge->dev, adev);
+	}
+
+	return 0;
+}
+
+/*
+ * Lookup the bus range for the domain in MCFG, and set up config space
+ * mapping.
+ */
+static struct pci_config_window *
+pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
+{
+	struct resource *bus_res = &root->secondary;
+	u16 seg = root->segment;
+	struct pci_config_window *cfg;
+	struct resource cfgres;
+	unsigned int bsz;
+
+	/* Use address from _CBA if present, otherwise lookup MCFG */
+	if (!root->mcfg_addr)
+		root->mcfg_addr = pci_mcfg_lookup(seg, bus_res);
+
+	if (!root->mcfg_addr) {
+		dev_err(&root->device->dev, "%04x:%pR ECAM region not found\n",
+			seg, bus_res);
+		return NULL;
+	}
+
+	bsz = 1 << pci_generic_ecam_ops.bus_shift;
+	cfgres.start = root->mcfg_addr + bus_res->start * bsz;
+	cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
+	cfgres.flags = IORESOURCE_MEM;
+	cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res,
+			      &pci_generic_ecam_ops);
+	if (IS_ERR(cfg)) {
+		dev_err(&root->device->dev, "%04x:%pR error %ld mapping ECAM\n",
+			seg, bus_res, PTR_ERR(cfg));
+		return NULL;
+	}
+
+	return cfg;
+}
+
+/* release_info: free resources allocated by init_info */
+static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
+{
+	struct acpi_pci_generic_root_info *ri;
+
+	ri = container_of(ci, struct acpi_pci_generic_root_info, common);
+	pci_ecam_free(ri->cfg);
+	kfree(ri);
+}
+
+static struct acpi_pci_root_ops acpi_pci_root_ops = {
+	.release_info = pci_acpi_generic_release_info,
+};
+
+/* Interface called from ACPI code to setup PCI host controller */
 struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 {
-	/* TODO: Should be revisited when implementing PCI on ACPI */
-	return NULL;
+	int node = acpi_get_node(root->device->handle);
+	struct acpi_pci_generic_root_info *ri;
+	struct pci_bus *bus, *child;
+
+	ri = kzalloc_node(sizeof(*ri), GFP_KERNEL, node);
+	if (!ri)
+		return NULL;
+
+	ri->cfg = pci_acpi_setup_ecam_mapping(root);
+	if (!ri->cfg) {
+		kfree(ri);
+		return NULL;
+	}
+
+	acpi_pci_root_ops.pci_ops = &ri->cfg->ops->pci_ops;
+	bus = acpi_pci_root_create(root, &acpi_pci_root_ops, &ri->common,
+				   ri->cfg);
+	if (!bus)
+		return NULL;
+
+	pci_bus_size_bridges(bus);
+	pci_bus_assign_resources(bus);
+
+	list_for_each_entry(child, &bus->children, node)
+		pcie_bus_configure_settings(child);
+
+	return bus;
 }
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+	acpi_pci_add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+	acpi_pci_remove_bus(bus);
+}
+
 #endif
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index fc3ecb55f1b2..2a120bb70e54 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -82,9 +82,6 @@ extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
 					 pgprot_t prot);
 
 #define HAVE_ARCH_PCI_RESOURCE_TO_USER
-extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
-				 const struct resource *rsrc,
-				 resource_size_t *start, resource_size_t *end);
 
 extern void pcibios_setup_bus_devices(struct pci_bus *bus);
 extern void pcibios_setup_bus_self(struct pci_bus *bus);
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 14cba600da7a..81556b843a8e 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -219,33 +219,6 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 }
 
 /*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
-				      pgprot_t protection,
-				      enum pci_mmap_state mmap_state,
-				      int write_combine)
-{
-	pgprot_t prot = protection;
-
-	/* Write combine is always 0 on non-memory space mappings. On
-	 * memory space, if the user didn't pass 1, we check for a
-	 * "prefetchable" resource. This is a bit hackish, but we use
-	 * this to workaround the inability of /sysfs to provide a write
-	 * combine bit
-	 */
-	if (mmap_state != pci_mmap_mem)
-		write_combine = 0;
-	else if (write_combine == 0) {
-		if (rp->flags & IORESOURCE_PREFETCH)
-			write_combine = 1;
-	}
-
-	return pgprot_noncached(prot);
-}
-
-/*
  * This one is used by /dev/mem and fbdev who have no clue about the
  * PCI device, it tries to find the PCI device first and calls the
  * above routine
@@ -317,9 +290,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 		return -EINVAL;
 
 	vma->vm_pgoff = offset >> PAGE_SHIFT;
-	vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
-						  vma->vm_page_prot,
-						  mmap_state, write_combine);
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 
 	ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
 			       vma->vm_end - vma->vm_start, vma->vm_page_prot);
@@ -473,39 +444,25 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 			  const struct resource *rsrc,
 			  resource_size_t *start, resource_size_t *end)
 {
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	resource_size_t offset = 0;
+	struct pci_bus_region region;
 
-	if (hose == NULL)
+	if (rsrc->flags & IORESOURCE_IO) {
+		pcibios_resource_to_bus(dev->bus, &region,
+					(struct resource *) rsrc);
+		*start = region.start;
+		*end = region.end;
 		return;
+	}
 
-	if (rsrc->flags & IORESOURCE_IO)
-		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
-	/* We pass a fully fixed up address to userland for MMIO instead of
-	 * a BAR value because X is lame and expects to be able to use that
-	 * to pass to /dev/mem !
+	/* We pass a CPU physical address to userland for MMIO instead of a
+	 * BAR value because X is lame and expects to be able to use that
+	 * to pass to /dev/mem!
 	 *
-	 * That means that we'll have potentially 64 bits values where some
-	 * userland apps only expect 32 (like X itself since it thinks only
-	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
-	 * 32 bits CHRPs :-(
-	 *
-	 * Hopefully, the sysfs insterface is immune to that gunk. Once X
-	 * has been fixed (and the fix spread enough), we can re-enable the
-	 * 2 lines below and pass down a BAR value to userland. In that case
-	 * we'll also have to re-enable the matching code in
-	 * __pci_mmap_make_offset().
-	 *
-	 * BenH.
+	 * That means we may have 64-bit values where some apps only expect
+	 * 32 (like X itself since it thinks only Sparc has 64-bit MMIO).
 	 */
-#if 0
-	else if (rsrc->flags & IORESOURCE_MEM)
-		offset = hose->pci_mem_offset;
-#endif
-
-	*start = rsrc->start - offset;
-	*end = rsrc->end - offset;
+	*start = rsrc->start;
+	*end = rsrc->end;
 }
 
 /**
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 86b239d9d75d..9b63cd41213d 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -80,16 +80,6 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 
 #define HAVE_ARCH_PCI_RESOURCE_TO_USER
 
-static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
-		const struct resource *rsrc, resource_size_t *start,
-		resource_size_t *end)
-{
-	phys_addr_t size = resource_size(rsrc);
-
-	*start = fixup_bigphys_addr(rsrc->start, size);
-	*end = rsrc->start + size;
-}
-
 /*
  * Dynamic DMA mapping stuff.
  * MIPS has everything mapped statically.
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index f1b11f0dea2d..b4c02f29663e 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -112,7 +112,14 @@ static void pcibios_scanbus(struct pci_controller *hose)
 		need_domain_info = 1;
 	}
 
-	if (!pci_has_flag(PCI_PROBE_ONLY)) {
+	/*
+	 * We insert PCI resources into the iomem_resource and
+	 * ioport_resource trees in either pci_bus_claim_resources()
+	 * or pci_bus_assign_resources().
+	 */
+	if (pci_has_flag(PCI_PROBE_ONLY)) {
+		pci_bus_claim_resources(bus);
+	} else {
 		pci_bus_size_bridges(bus);
 		pci_bus_assign_resources(bus);
 	}
@@ -319,6 +326,16 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 EXPORT_SYMBOL(PCIBIOS_MIN_IO);
 EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
 
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc, resource_size_t *start,
+			  resource_size_t *end)
+{
+	phys_addr_t size = resource_size(rsrc);
+
+	*start = fixup_bigphys_addr(rsrc->start, size);
+	*end = rsrc->start + size;
+}
+
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			enum pci_mmap_state mmap_state, int write_combine)
 {
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index a6f3ac0d4602..e9bd6cf0212f 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -136,9 +136,6 @@ extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
 					 pgprot_t prot);
 
 #define HAVE_ARCH_PCI_RESOURCE_TO_USER
-extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
-				 const struct resource *rsrc,
-				 resource_size_t *start, resource_size_t *end);
 
 extern resource_size_t pcibios_io_space_offset(struct pci_controller *hose);
 extern void pcibios_setup_bus_devices(struct pci_bus *bus);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index f93942b4b6a6..a5c0153ede37 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -412,36 +412,6 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 }
 
 /*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
-				      pgprot_t protection,
-				      enum pci_mmap_state mmap_state,
-				      int write_combine)
-{
-
-	/* Write combine is always 0 on non-memory space mappings. On
-	 * memory space, if the user didn't pass 1, we check for a
-	 * "prefetchable" resource. This is a bit hackish, but we use
-	 * this to workaround the inability of /sysfs to provide a write
-	 * combine bit
-	 */
-	if (mmap_state != pci_mmap_mem)
-		write_combine = 0;
-	else if (write_combine == 0) {
-		if (rp->flags & IORESOURCE_PREFETCH)
-			write_combine = 1;
-	}
-
-	/* XXX would be nice to have a way to ask for write-through */
-	if (write_combine)
-		return pgprot_noncached_wc(protection);
-	else
-		return pgprot_noncached(protection);
-}
-
-/*
  * This one is used by /dev/mem and fbdev who have no clue about the
  * PCI device, it tries to find the PCI device first and calls the
  * above routine
@@ -514,9 +484,10 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 		return -EINVAL;
 
 	vma->vm_pgoff = offset >> PAGE_SHIFT;
-	vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
-						  vma->vm_page_prot,
-						  mmap_state, write_combine);
+	if (write_combine)
+		vma->vm_page_prot = pgprot_noncached_wc(vma->vm_page_prot);
+	else
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 
 	ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
 			       vma->vm_end - vma->vm_start, vma->vm_page_prot);
@@ -666,39 +637,25 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 			  const struct resource *rsrc,
 			  resource_size_t *start, resource_size_t *end)
 {
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	resource_size_t offset = 0;
+	struct pci_bus_region region;
 
-	if (hose == NULL)
+	if (rsrc->flags & IORESOURCE_IO) {
+		pcibios_resource_to_bus(dev->bus, &region,
+					(struct resource *) rsrc);
+		*start = region.start;
+		*end = region.end;
 		return;
+	}
 
-	if (rsrc->flags & IORESOURCE_IO)
-		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
-	/* We pass a fully fixed up address to userland for MMIO instead of
-	 * a BAR value because X is lame and expects to be able to use that
-	 * to pass to /dev/mem !
-	 *
-	 * That means that we'll have potentially 64 bits values where some
-	 * userland apps only expect 32 (like X itself since it thinks only
-	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
-	 * 32 bits CHRPs :-(
-	 *
-	 * Hopefully, the sysfs insterface is immune to that gunk. Once X
-	 * has been fixed (and the fix spread enough), we can re-enable the
-	 * 2 lines below and pass down a BAR value to userland. In that case
-	 * we'll also have to re-enable the matching code in
-	 * __pci_mmap_make_offset().
+	/* We pass a CPU physical address to userland for MMIO instead of a
+	 * BAR value because X is lame and expects to be able to use that
+	 * to pass to /dev/mem!
 	 *
-	 * BenH.
+	 * That means we may have 64-bit values where some apps only expect
+	 * 32 (like X itself since it thinks only Sparc has 64-bit MMIO).
 	 */
-#if 0
-	else if (rsrc->flags & IORESOURCE_MEM)
-		offset = hose->pci_mem_offset;
-#endif
-
-	*start = rsrc->start - offset;
-	*end = rsrc->end - offset;
+	*start = rsrc->start;
+	*end = rsrc->end;
 }
 
 /**
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index 022d16008a00..2303635158f5 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -55,9 +55,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 }
 
 #define HAVE_ARCH_PCI_RESOURCE_TO_USER
-void pci_resource_to_user(const struct pci_dev *dev, int bar,
-			  const struct resource *rsrc,
-			  resource_size_t *start, resource_size_t *end);
 #endif /* __KERNEL__ */
 
 #endif /* __SPARC64_PCI_H */
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index c2b202d763a1..9c1878f4fa9f 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -986,16 +986,18 @@ void pci_resource_to_user(const struct pci_dev *pdev, int bar,
 			  const struct resource *rp, resource_size_t *start,
 			  resource_size_t *end)
 {
-	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
-	unsigned long offset;
-
-	if (rp->flags & IORESOURCE_IO)
-		offset = pbm->io_space.start;
-	else
-		offset = pbm->mem_space.start;
+	struct pci_bus_region region;
 
-	*start = rp->start - offset;
-	*end = rp->end - offset;
+	/*
+	 * "User" addresses are shown in /sys/devices/pci.../.../resource
+	 * and /proc/bus/pci/devices and used as mmap offsets for
+	 * /proc/bus/pci/BB/DD.F files (see proc_bus_pci_mmap()).
+	 *
+	 * On sparc, these are PCI bus addresses, i.e., raw BAR values.
+	 */
+	pcibios_resource_to_bus(pdev->bus, &region, (struct resource *) rp);
+	*start = region.start;
+	*end = region.end;
 }
 
 void pcibios_set_master(struct pci_dev *dev)
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
index d45fa5f3e9c4..62137d13c6f9 100644
--- a/arch/unicore32/kernel/pci.c
+++ b/arch/unicore32/kernel/pci.c
@@ -265,10 +265,8 @@ static int __init pci_common_init(void)
 
 	pci_fixup_irqs(pci_common_swizzle, pci_puv3_map_irq);
 
-	if (!pci_has_flag(PCI_PROBE_ONLY)) {
-		pci_bus_size_bridges(puv3_bus);
-		pci_bus_assign_resources(puv3_bus);
-	}
+	pci_bus_size_bridges(puv3_bus);
+	pci_bus_assign_resources(puv3_bus);
 	pci_bus_add_devices(puv3_bus);
 	return 0;
 }
@@ -279,9 +277,6 @@ char * __init pcibios_setup(char *str)
 	if (!strcmp(str, "debug")) {
 		debug_pci = 1;
 		return NULL;
-	} else if (!strcmp(str, "firmware")) {
-		pci_add_flags(PCI_PROBE_ONLY);
-		return NULL;
 	}
 	return str;
 }
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 8196054fedb0..7b6a9d14c8c0 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -133,7 +133,7 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev)
 	if (pci_probe & PCI_NOASSIGN_BARS) {
 		/*
 		* If the BIOS did not assign the BAR, zero out the
-		* resource so the kernel doesn't attmept to assign
+		* resource so the kernel doesn't attempt to assign
 		* it later on in pci_assign_unassigned_resources
 		*/
 		for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
diff --git a/arch/x86/pci/vmd.c b/arch/x86/pci/vmd.c
index 613cac7395c4..e88b4176260f 100644
--- a/arch/x86/pci/vmd.c
+++ b/arch/x86/pci/vmd.c
@@ -119,10 +119,11 @@ static void vmd_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 static void vmd_irq_enable(struct irq_data *data)
 {
 	struct vmd_irq *vmdirq = data->chip_data;
+	unsigned long flags;
 
-	raw_spin_lock(&list_lock);
+	raw_spin_lock_irqsave(&list_lock, flags);
 	list_add_tail_rcu(&vmdirq->node, &vmdirq->irq->irq_list);
-	raw_spin_unlock(&list_lock);
+	raw_spin_unlock_irqrestore(&list_lock, flags);
 
 	data->chip->irq_unmask(data);
 }
@@ -130,12 +131,14 @@ static void vmd_irq_enable(struct irq_data *data)
 static void vmd_irq_disable(struct irq_data *data)
 {
 	struct vmd_irq *vmdirq = data->chip_data;
+	unsigned long flags;
 
 	data->chip->irq_mask(data);
 
-	raw_spin_lock(&list_lock);
+	raw_spin_lock_irqsave(&list_lock, flags);
 	list_del_rcu(&vmdirq->node);
-	raw_spin_unlock(&list_lock);
+	INIT_LIST_HEAD_RCU(&vmdirq->node);
+	raw_spin_unlock_irqrestore(&list_lock, flags);
 }
 
 /*
@@ -166,16 +169,20 @@ static irq_hw_number_t vmd_get_hwirq(struct msi_domain_info *info,
  * XXX: We can be even smarter selecting the best IRQ once we solve the
  * affinity problem.
  */
-static struct vmd_irq_list *vmd_next_irq(struct vmd_dev *vmd)
+static struct vmd_irq_list *vmd_next_irq(struct vmd_dev *vmd, struct msi_desc *desc)
 {
-	int i, best = 0;
+	int i, best = 1;
+	unsigned long flags;
 
-	raw_spin_lock(&list_lock);
+	if (!desc->msi_attrib.is_msix || vmd->msix_count == 1)
+		return &vmd->irqs[0];
+
+	raw_spin_lock_irqsave(&list_lock, flags);
 	for (i = 1; i < vmd->msix_count; i++)
 		if (vmd->irqs[i].count < vmd->irqs[best].count)
 			best = i;
 	vmd->irqs[best].count++;
-	raw_spin_unlock(&list_lock);
+	raw_spin_unlock_irqrestore(&list_lock, flags);
 
 	return &vmd->irqs[best];
 }
@@ -184,14 +191,15 @@ static int vmd_msi_init(struct irq_domain *domain, struct msi_domain_info *info,
 			unsigned int virq, irq_hw_number_t hwirq,
 			msi_alloc_info_t *arg)
 {
-	struct vmd_dev *vmd = vmd_from_bus(msi_desc_to_pci_dev(arg->desc)->bus);
+	struct msi_desc *desc = arg->desc;
+	struct vmd_dev *vmd = vmd_from_bus(msi_desc_to_pci_dev(desc)->bus);
 	struct vmd_irq *vmdirq = kzalloc(sizeof(*vmdirq), GFP_KERNEL);
 
 	if (!vmdirq)
 		return -ENOMEM;
 
 	INIT_LIST_HEAD(&vmdirq->node);
-	vmdirq->irq = vmd_next_irq(vmd);
+	vmdirq->irq = vmd_next_irq(vmd, desc);
 	vmdirq->virq = virq;
 
 	irq_domain_set_info(domain, virq, vmdirq->irq->vmd_vector, info->chip,
@@ -203,11 +211,12 @@ static void vmd_msi_free(struct irq_domain *domain,
 			struct msi_domain_info *info, unsigned int virq)
 {
 	struct vmd_irq *vmdirq = irq_get_chip_data(virq);
+	unsigned long flags;
 
 	/* XXX: Potential optimization to rebalance */
-	raw_spin_lock(&list_lock);
+	raw_spin_lock_irqsave(&list_lock, flags);
 	vmdirq->irq->count--;
-	raw_spin_unlock(&list_lock);
+	raw_spin_unlock_irqrestore(&list_lock, flags);
 
 	kfree_rcu(vmdirq, rcu);
 }
@@ -261,7 +270,7 @@ static struct device *to_vmd_dev(struct device *dev)
 
 static struct dma_map_ops *vmd_dma_ops(struct device *dev)
 {
-	return to_vmd_dev(dev)->archdata.dma_ops;
+	return get_dma_ops(to_vmd_dev(dev));
 }
 
 static void *vmd_alloc(struct device *dev, size_t size, dma_addr_t *addr,
@@ -367,7 +376,7 @@ static void vmd_teardown_dma_ops(struct vmd_dev *vmd)
 {
 	struct dma_domain *domain = &vmd->dma_domain;
 
-	if (vmd->dev->dev.archdata.dma_ops)
+	if (get_dma_ops(&vmd->dev->dev))
 		del_dma_domain(domain);
 }
 
@@ -379,7 +388,7 @@ static void vmd_teardown_dma_ops(struct vmd_dev *vmd)
 
 static void vmd_setup_dma_ops(struct vmd_dev *vmd)
 {
-	const struct dma_map_ops *source = vmd->dev->dev.archdata.dma_ops;
+	const struct dma_map_ops *source = get_dma_ops(&vmd->dev->dev);
 	struct dma_map_ops *dest = &vmd->dma_ops;
 	struct dma_domain *domain = &vmd->dma_domain;
 
@@ -594,7 +603,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
 	sd->node = pcibus_to_node(vmd->dev->bus);
 
 	vmd->irq_domain = pci_msi_create_irq_domain(NULL, &vmd_msi_domain_info,
-						    NULL);
+						    x86_vector_domain);
 	if (!vmd->irq_domain)
 		return -ENODEV;
 
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index aebd944bdaa1..445ce28475b3 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -221,6 +221,9 @@ config ACPI_PROCESSOR_IDLE
 	bool
 	select CPU_IDLE
 
+config ACPI_MCFG
+	bool
+
 config ACPI_CPPC_LIB
 	bool
 	depends on ACPI_PROCESSOR
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 35a6ccbe3025..5ae9d85c5159 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -40,6 +40,7 @@ acpi-$(CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC) += processor_pdc.o
 acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-y				+= pci_root.o pci_link.o pci_irq.o
+obj-$(CONFIG_ACPI_MCFG)		+= pci_mcfg.o
 acpi-y				+= acpi_lpss.o acpi_apd.o
 acpi-y				+= acpi_platform.o
 acpi-y				+= acpi_pnp.o
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
new file mode 100644
index 000000000000..b5b376e081f5
--- /dev/null
+++ b/drivers/acpi/pci_mcfg.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *	Author: Jayachandran C <jchandra@broadcom.com>
+ * Copyright (C) 2016 Semihalf
+ * 	Author: Tomasz Nowicki <tn@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#define pr_fmt(fmt) "ACPI: " fmt
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+
+/* Structure to hold entries from the MCFG table */
+struct mcfg_entry {
+	struct list_head	list;
+	phys_addr_t		addr;
+	u16			segment;
+	u8			bus_start;
+	u8			bus_end;
+};
+
+/* List to save MCFG entries */
+static LIST_HEAD(pci_mcfg_list);
+
+phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
+{
+	struct mcfg_entry *e;
+
+	/*
+	 * We expect exact match, unless MCFG entry end bus covers more than
+	 * specified by caller.
+	 */
+	list_for_each_entry(e, &pci_mcfg_list, list) {
+		if (e->segment == seg && e->bus_start == bus_res->start &&
+		    e->bus_end >= bus_res->end)
+			return e->addr;
+	}
+
+	return 0;
+}
+
+static __init int pci_mcfg_parse(struct acpi_table_header *header)
+{
+	struct acpi_table_mcfg *mcfg;
+	struct acpi_mcfg_allocation *mptr;
+	struct mcfg_entry *e, *arr;
+	int i, n;
+
+	if (header->length < sizeof(struct acpi_table_mcfg))
+		return -EINVAL;
+
+	n = (header->length - sizeof(struct acpi_table_mcfg)) /
+					sizeof(struct acpi_mcfg_allocation);
+	mcfg = (struct acpi_table_mcfg *)header;
+	mptr = (struct acpi_mcfg_allocation *) &mcfg[1];
+
+	arr = kcalloc(n, sizeof(*arr), GFP_KERNEL);
+	if (!arr)
+		return -ENOMEM;
+
+	for (i = 0, e = arr; i < n; i++, mptr++, e++) {
+		e->segment = mptr->pci_segment;
+		e->addr =  mptr->address;
+		e->bus_start = mptr->start_bus_number;
+		e->bus_end = mptr->end_bus_number;
+		list_add(&e->list, &pci_mcfg_list);
+	}
+
+	pr_info("MCFG table detected, %d entries\n", n);
+	return 0;
+}
+
+/* Interface called by ACPI - parse and save MCFG table */
+void __init pci_mmcfg_late_init(void)
+{
+	int err = acpi_table_parse(ACPI_SIG_MCFG, pci_mcfg_parse);
+	if (err)
+		pr_err("Failed to parse MCFG (%d)\n", err);
+}
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index ae3fe4e64203..d144168d4ef9 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -720,6 +720,36 @@ next:
 	}
 }
 
+static void acpi_pci_root_remap_iospace(struct resource_entry *entry)
+{
+#ifdef PCI_IOBASE
+	struct resource *res = entry->res;
+	resource_size_t cpu_addr = res->start;
+	resource_size_t pci_addr = cpu_addr - entry->offset;
+	resource_size_t length = resource_size(res);
+	unsigned long port;
+
+	if (pci_register_io_range(cpu_addr, length))
+		goto err;
+
+	port = pci_address_to_pio(cpu_addr);
+	if (port == (unsigned long)-1)
+		goto err;
+
+	res->start = port;
+	res->end = port + length - 1;
+	entry->offset = port - pci_addr;
+
+	if (pci_remap_iospace(res, cpu_addr) < 0)
+		goto err;
+
+	pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res);
+	return;
+err:
+	res->flags |= IORESOURCE_DISABLED;
+#endif
+}
+
 int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info)
 {
 	int ret;
@@ -740,6 +770,9 @@ int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info)
 			"no IO and memory resources present in _CRS\n");
 	else {
 		resource_list_for_each_entry_safe(entry, tmp, list) {
+			if (entry->res->flags & IORESOURCE_IO)
+				acpi_pci_root_remap_iospace(entry);
+
 			if (entry->res->flags & IORESOURCE_DISABLED)
 				resource_list_destroy_entry(entry);
 			else
@@ -811,6 +844,8 @@ static void acpi_pci_root_release_info(struct pci_host_bridge *bridge)
 
 	resource_list_for_each_entry(entry, &bridge->windows) {
 		res = entry->res;
+		if (res->flags & IORESOURCE_IO)
+			pci_unmap_iospace(res);
 		if (res->parent &&
 		    (res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
 			release_resource(res);
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 5495a5ba8039..7f8728984f44 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -21,9 +21,9 @@ config ARM_GIC_MAX_NR
 
 config ARM_GIC_V2M
 	bool
-	depends on ARM_GIC
-	depends on PCI && PCI_MSI
-	select PCI_MSI_IRQ_DOMAIN
+	depends on PCI
+	select ARM_GIC
+	select PCI_MSI
 
 config GIC_NON_BANKED
 	bool
@@ -37,7 +37,8 @@ config ARM_GIC_V3
 
 config ARM_GIC_V3_ITS
 	bool
-	select PCI_MSI_IRQ_DOMAIN
+	depends on PCI
+	depends on PCI_MSI
 
 config ARM_NVIC
 	bool
@@ -62,13 +63,13 @@ config ARM_VIC_NR
 config ARMADA_370_XP_IRQ
 	bool
 	select GENERIC_IRQ_CHIP
-	select PCI_MSI_IRQ_DOMAIN if PCI_MSI
+	select PCI_MSI if PCI
 
 config ALPINE_MSI
 	bool
-	depends on PCI && PCI_MSI
+	depends on PCI
+	select PCI_MSI
 	select GENERIC_IRQ_CHIP
-	select PCI_MSI_IRQ_DOMAIN
 
 config ATMEL_AIC_IRQ
 	bool
@@ -117,7 +118,6 @@ config HISILICON_IRQ_MBIGEN
 	bool
 	select ARM_GIC_V3
 	select ARM_GIC_V3_ITS
-	select GENERIC_MSI_IRQ_DOMAIN
 
 config IMGPDC_IRQ
 	bool
@@ -250,12 +250,10 @@ config IRQ_MXS
 
 config MVEBU_ODMI
 	bool
-	select GENERIC_MSI_IRQ_DOMAIN
 
 config LS_SCFG_MSI
 	def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
 	depends on PCI && PCI_MSI
-	select PCI_MSI_IRQ_DOMAIN
 
 config PARTITION_PERCPU
 	bool
diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c
index 4cf8f82cfca2..a70b853fa2c9 100644
--- a/drivers/misc/genwqe/card_base.c
+++ b/drivers/misc/genwqe/card_base.c
@@ -182,7 +182,7 @@ static void genwqe_dev_free(struct genwqe_dev *cd)
  */
 static int genwqe_bus_reset(struct genwqe_dev *cd)
 {
-	int bars, rc = 0;
+	int rc = 0;
 	struct pci_dev *pci_dev = cd->pci_dev;
 	void __iomem *mmio;
 
@@ -193,8 +193,7 @@ static int genwqe_bus_reset(struct genwqe_dev *cd)
 	cd->mmio = NULL;
 	pci_iounmap(pci_dev, mmio);
 
-	bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
-	pci_release_selected_regions(pci_dev, bars);
+	pci_release_mem_regions(pci_dev);
 
 	/*
 	 * Firmware/BIOS might change memory mapping during bus reset.
@@ -218,7 +217,7 @@ static int genwqe_bus_reset(struct genwqe_dev *cd)
 			    GENWQE_INJECT_GFIR_FATAL |
 			    GENWQE_INJECT_GFIR_INFO);
 
-	rc = pci_request_selected_regions(pci_dev, bars, genwqe_driver_name);
+	rc = pci_request_mem_regions(pci_dev, genwqe_driver_name);
 	if (rc) {
 		dev_err(&pci_dev->dev,
 			"[%s] err: request bars failed (%d)\n", __func__, rc);
@@ -1068,10 +1067,9 @@ static int genwqe_health_check_stop(struct genwqe_dev *cd)
  */
 static int genwqe_pci_setup(struct genwqe_dev *cd)
 {
-	int err, bars;
+	int err;
 	struct pci_dev *pci_dev = cd->pci_dev;
 
-	bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
 	err = pci_enable_device_mem(pci_dev);
 	if (err) {
 		dev_err(&pci_dev->dev,
@@ -1080,7 +1078,7 @@ static int genwqe_pci_setup(struct genwqe_dev *cd)
 	}
 
 	/* Reserve PCI I/O and memory resources */
-	err = pci_request_selected_regions(pci_dev, bars, genwqe_driver_name);
+	err = pci_request_mem_regions(pci_dev, genwqe_driver_name);
 	if (err) {
 		dev_err(&pci_dev->dev,
 			"[%s] err: request bars failed (%d)\n", __func__, err);
@@ -1142,7 +1140,7 @@ static int genwqe_pci_setup(struct genwqe_dev *cd)
  out_iounmap:
 	pci_iounmap(pci_dev, cd->mmio);
  out_release_resources:
-	pci_release_selected_regions(pci_dev, bars);
+	pci_release_mem_regions(pci_dev);
  err_disable_device:
 	pci_disable_device(pci_dev);
  err_out:
@@ -1154,14 +1152,12 @@ static int genwqe_pci_setup(struct genwqe_dev *cd)
  */
 static void genwqe_pci_remove(struct genwqe_dev *cd)
 {
-	int bars;
 	struct pci_dev *pci_dev = cd->pci_dev;
 
 	if (cd->mmio)
 		pci_iounmap(pci_dev, cd->mmio);
 
-	bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
-	pci_release_selected_regions(pci_dev, bars);
+	pci_release_mem_regions(pci_dev);
 	pci_disable_device(pci_dev);
 }
 
diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
index e708e360a9e3..6453148d066a 100644
--- a/drivers/net/ethernet/atheros/alx/main.c
+++ b/drivers/net/ethernet/atheros/alx/main.c
@@ -1251,7 +1251,7 @@ static int alx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct alx_priv *alx;
 	struct alx_hw *hw;
 	bool phy_configured;
-	int bars, err;
+	int err;
 
 	err = pci_enable_device_mem(pdev);
 	if (err)
@@ -1271,11 +1271,10 @@ static int alx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
-	bars = pci_select_bars(pdev, IORESOURCE_MEM);
-	err = pci_request_selected_regions(pdev, bars, alx_drv_name);
+	err = pci_request_mem_regions(pdev, alx_drv_name);
 	if (err) {
 		dev_err(&pdev->dev,
-			"pci_request_selected_regions failed(bars:%d)\n", bars);
+			"pci_request_mem_regions failed\n");
 		goto out_pci_disable;
 	}
 
@@ -1401,7 +1400,7 @@ out_unmap:
 out_free_netdev:
 	free_netdev(netdev);
 out_pci_release:
-	pci_release_selected_regions(pdev, bars);
+	pci_release_mem_regions(pdev);
 out_pci_disable:
 	pci_disable_device(pdev);
 	return err;
@@ -1420,8 +1419,7 @@ static void alx_remove(struct pci_dev *pdev)
 
 	unregister_netdev(alx->dev);
 	iounmap(hw->hw_addr);
-	pci_release_selected_regions(pdev,
-				     pci_select_bars(pdev, IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 
 	pci_disable_pcie_error_reporting(pdev);
 	pci_disable_device(pdev);
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 41f32c0b341e..02f443958f31 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -7330,8 +7330,7 @@ err_flashmap:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_selected_regions(pdev,
-				     pci_select_bars(pdev, IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -7398,8 +7397,7 @@ static void e1000_remove(struct pci_dev *pdev)
 	if ((adapter->hw.flash_address) &&
 	    (adapter->hw.mac.type < e1000_pch_spt))
 		iounmap(adapter->hw.flash_address);
-	pci_release_selected_regions(pdev,
-				     pci_select_bars(pdev, IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 
 	free_netdev(netdev);
 
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
index b8245c734c96..774a5654bf42 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
@@ -1963,10 +1963,7 @@ static int fm10k_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_dma;
 	}
 
-	err = pci_request_selected_regions(pdev,
-					   pci_select_bars(pdev,
-							   IORESOURCE_MEM),
-					   fm10k_driver_name);
+	err = pci_request_mem_regions(pdev, fm10k_driver_name);
 	if (err) {
 		dev_err(&pdev->dev,
 			"pci_request_selected_regions failed: %d\n", err);
@@ -2070,8 +2067,7 @@ err_sw_init:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_netdev:
-	pci_release_selected_regions(pdev,
-				     pci_select_bars(pdev, IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -2119,8 +2115,7 @@ static void fm10k_remove(struct pci_dev *pdev)
 
 	free_netdev(netdev);
 
-	pci_release_selected_regions(pdev,
-				     pci_select_bars(pdev, IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 
 	pci_disable_pcie_error_reporting(pdev);
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 339d99be4702..81c99e1be708 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10710,8 +10710,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	/* set up pci connections */
-	err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
-					   IORESOURCE_MEM), i40e_driver_name);
+	err = pci_request_mem_regions(pdev, i40e_driver_name);
 	if (err) {
 		dev_info(&pdev->dev,
 			 "pci_request_selected_regions failed %d\n", err);
@@ -11208,8 +11207,7 @@ err_ioremap:
 	kfree(pf);
 err_pf_alloc:
 	pci_disable_pcie_error_reporting(pdev);
-	pci_release_selected_regions(pdev,
-				     pci_select_bars(pdev, IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -11320,8 +11318,7 @@ static void i40e_remove(struct pci_dev *pdev)
 
 	iounmap(hw->hw_addr);
 	kfree(pf);
-	pci_release_selected_regions(pdev,
-				     pci_select_bars(pdev, IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 
 	pci_disable_pcie_error_reporting(pdev);
 	pci_disable_device(pdev);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 9bcba42abb91..942a89fb0090 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2324,9 +2324,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
-	err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
-					   IORESOURCE_MEM),
-					   igb_driver_name);
+	err = pci_request_mem_regions(pdev, igb_driver_name);
 	if (err)
 		goto err_pci_reg;
 
@@ -2750,8 +2748,7 @@ err_sw_init:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_selected_regions(pdev,
-				     pci_select_bars(pdev, IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -2916,8 +2913,7 @@ static void igb_remove(struct pci_dev *pdev)
 	pci_iounmap(pdev, adapter->io_addr);
 	if (hw->flash_address)
 		iounmap(hw->flash_address);
-	pci_release_selected_regions(pdev,
-				     pci_select_bars(pdev, IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 
 	kfree(adapter->shadow_vfta);
 	free_netdev(netdev);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 7871f538f0ad..5418c69a7463 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -9353,8 +9353,7 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		pci_using_dac = 0;
 	}
 
-	err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
-					   IORESOURCE_MEM), ixgbe_driver_name);
+	err = pci_request_mem_regions(pdev, ixgbe_driver_name);
 	if (err) {
 		dev_err(&pdev->dev,
 			"pci_request_selected_regions failed 0x%x\n", err);
@@ -9740,8 +9739,7 @@ err_ioremap:
 	disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state);
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_selected_regions(pdev,
-				     pci_select_bars(pdev, IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 err_pci_reg:
 err_dma:
 	if (!adapter || disable_dev)
@@ -9808,8 +9806,7 @@ static void ixgbe_remove(struct pci_dev *pdev)
 
 #endif
 	iounmap(adapter->io_addr);
-	pci_release_selected_regions(pdev, pci_select_bars(pdev,
-				     IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 
 	e_dev_info("complete\n");
 
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 4cb9b156cab7..d7c33f9361aa 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1661,14 +1661,9 @@ static int nvme_pci_enable(struct nvme_dev *dev)
 
 static void nvme_dev_unmap(struct nvme_dev *dev)
 {
-	struct pci_dev *pdev = to_pci_dev(dev->dev);
-	int bars;
-
 	if (dev->bar)
 		iounmap(dev->bar);
-
-	bars = pci_select_bars(pdev, IORESOURCE_MEM);
-	pci_release_selected_regions(pdev, bars);
+	pci_release_mem_regions(to_pci_dev(dev->dev));
 }
 
 static void nvme_pci_disable(struct nvme_dev *dev)
@@ -1897,13 +1892,9 @@ static const struct nvme_ctrl_ops nvme_pci_ctrl_ops = {
 
 static int nvme_dev_map(struct nvme_dev *dev)
 {
-	int bars;
 	struct pci_dev *pdev = to_pci_dev(dev->dev);
 
-	bars = pci_select_bars(pdev, IORESOURCE_MEM);
-	if (!bars)
-		return -ENODEV;
-	if (pci_request_selected_regions(pdev, bars, "nvme"))
+	if (pci_request_mem_regions(pdev, "nvme"))
 		return -ENODEV;
 
 	dev->bar = ioremap(pci_resource_start(pdev, 0), 8192);
@@ -1912,7 +1903,7 @@ static int nvme_dev_map(struct nvme_dev *dev)
 
        return 0;
   release:
-       pci_release_selected_regions(pdev, bars);
+       pci_release_mem_regions(pdev);
        return -ENODEV;
 }
 
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 56389be5d08b..67f9916ff14d 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -25,7 +25,7 @@ config PCI_MSI
 	   If you don't know what to do here, say Y.
 
 config PCI_MSI_IRQ_DOMAIN
-	bool
+	def_bool ARM || ARM64 || X86
 	depends on PCI_MSI
 	select GENERIC_MSI_IRQ_DOMAIN
 
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index dd7cdbee8029..c288e5a52575 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -91,6 +91,35 @@ void pci_bus_remove_resources(struct pci_bus *bus)
 	}
 }
 
+int devm_request_pci_bus_resources(struct device *dev,
+				   struct list_head *resources)
+{
+	struct resource_entry *win;
+	struct resource *parent, *res;
+	int err;
+
+	resource_list_for_each_entry(win, resources) {
+		res = win->res;
+		switch (resource_type(res)) {
+		case IORESOURCE_IO:
+			parent = &ioport_resource;
+			break;
+		case IORESOURCE_MEM:
+			parent = &iomem_resource;
+			break;
+		default:
+			continue;
+		}
+
+		err = devm_request_resource(dev, parent, res);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_request_pci_bus_resources);
+
 static struct pci_bus_region pci_32_bit = {0, 0xffffffffULL};
 #ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
 static struct pci_bus_region pci_64_bit = {0,
@@ -291,6 +320,7 @@ void pci_bus_add_device(struct pci_dev *dev)
 	pci_fixup_device(pci_fixup_final, dev);
 	pci_create_sysfs_dev_files(dev);
 	pci_proc_attach_device(dev);
+	pci_bridge_d3_device_changed(dev);
 
 	dev->match_driver = true;
 	retval = device_attach(&dev->dev);
@@ -397,4 +427,3 @@ void pci_bus_put(struct pci_bus *bus)
 		put_device(&bus->dev);
 }
 EXPORT_SYMBOL(pci_bus_put);
-
diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c
index f9832ad8efe2..66e0d718472f 100644
--- a/drivers/pci/ecam.c
+++ b/drivers/pci/ecam.c
@@ -19,10 +19,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/pci-ecam.h>
 #include <linux/slab.h>
 
-#include "ecam.h"
-
 /*
  * On 64-bit systems, we do a single ioremap for the whole config space
  * since we have enough virtual address range available.  On 32-bit, we
@@ -52,6 +51,7 @@ struct pci_config_window *pci_ecam_create(struct device *dev,
 	if (!cfg)
 		return ERR_PTR(-ENOMEM);
 
+	cfg->parent = dev;
 	cfg->ops = ops;
 	cfg->busr.start = busr->start;
 	cfg->busr.end = busr->end;
@@ -95,7 +95,7 @@ struct pci_config_window *pci_ecam_create(struct device *dev,
 	}
 
 	if (ops->init) {
-		err = ops->init(dev, cfg);
+		err = ops->init(cfg);
 		if (err)
 			goto err_exit;
 	}
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 5d2374e4ee7f..9b485d873b0d 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -3,8 +3,9 @@ menu "PCI host controller drivers"
 
 config PCI_DRA7XX
 	bool "TI DRA7xx PCIe controller"
-	select PCIE_DW
 	depends on OF && HAS_IOMEM && TI_PIPE3
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_DW
 	help
 	 Enables support for the PCIe controller in the DRA7xx SoC.  There
 	 are two instances of PCIe controller in DRA7xx.  This controller can
@@ -16,11 +17,20 @@ config PCI_MVEBU
 	depends on ARM
 	depends on OF
 
+config PCI_AARDVARK
+	bool "Aardvark PCIe controller"
+	depends on ARCH_MVEBU && ARM64
+	depends on OF
+	depends on PCI_MSI_IRQ_DOMAIN
+	help
+	 Add support for Aardvark 64bit PCIe Host Controller. This
+	 controller is part of the South Bridge of the Marvel Armada
+	 3700 SoC.
 
 config PCIE_XILINX_NWL
 	bool "NWL PCIe Core"
 	depends on ARCH_ZYNQMP
-	select PCI_MSI_IRQ_DOMAIN if PCI_MSI
+	depends on PCI_MSI_IRQ_DOMAIN
 	help
 	 Say 'Y' here if you want kernel support for Xilinx
 	 NWL PCIe controller. The controller can act as Root Port
@@ -29,6 +39,7 @@ config PCIE_XILINX_NWL
 
 config PCIE_DW_PLAT
 	bool "Platform bus based DesignWare PCIe Controller"
+	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW
 	---help---
 	 This selects the DesignWare PCIe controller support. Select this if
@@ -40,16 +51,19 @@ config PCIE_DW_PLAT
 
 config PCIE_DW
 	bool
+	depends on PCI_MSI_IRQ_DOMAIN
 
 config PCI_EXYNOS
 	bool "Samsung Exynos PCIe controller"
 	depends on SOC_EXYNOS5440
+	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
 	select PCIE_DW
 
 config PCI_IMX6
 	bool "Freescale i.MX6 PCIe controller"
 	depends on SOC_IMX6Q
+	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
 	select PCIE_DW
 
@@ -72,8 +86,7 @@ config PCI_RCAR_GEN2
 config PCIE_RCAR
 	bool "Renesas R-Car PCIe controller"
 	depends on ARCH_RENESAS || (ARM && COMPILE_TEST)
-	select PCI_MSI
-	select PCI_MSI_IRQ_DOMAIN
+	depends on PCI_MSI_IRQ_DOMAIN
 	help
 	  Say Y here if you want PCIe controller support on R-Car SoCs.
 
@@ -85,6 +98,7 @@ config PCI_HOST_GENERIC
 	bool "Generic PCI host controller"
 	depends on (ARM || ARM64) && OF
 	select PCI_HOST_COMMON
+	select IRQ_DOMAIN
 	help
 	  Say Y here if you want to support a simple generic PCI host
 	  controller, such as the one emulated by kvmtool.
@@ -92,6 +106,7 @@ config PCI_HOST_GENERIC
 config PCIE_SPEAR13XX
 	bool "STMicroelectronics SPEAr PCIe controller"
 	depends on ARCH_SPEAR13XX
+	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
 	select PCIE_DW
 	help
@@ -100,6 +115,7 @@ config PCIE_SPEAR13XX
 config PCI_KEYSTONE
 	bool "TI Keystone PCIe controller"
 	depends on ARCH_KEYSTONE
+	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW
 	select PCIEPORTBUS
 	help
@@ -120,7 +136,6 @@ config PCI_XGENE
 	depends on ARCH_XGENE
 	depends on OF
 	select PCIEPORTBUS
-	select PCI_MSI_IRQ_DOMAIN if PCI_MSI
 	help
 	  Say Y here if you want internal PCI support on APM X-Gene SoC.
 	  There are 5 internal PCIe ports available. Each port is GEN3 capable
@@ -128,7 +143,8 @@ config PCI_XGENE
 
 config PCI_XGENE_MSI
 	bool "X-Gene v1 PCIe MSI feature"
-	depends on PCI_XGENE && PCI_MSI
+	depends on PCI_XGENE
+	depends on PCI_MSI_IRQ_DOMAIN
 	default y
 	help
 	  Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC.
@@ -137,6 +153,7 @@ config PCI_XGENE_MSI
 config PCI_LAYERSCAPE
 	bool "Freescale Layerscape PCIe controller"
 	depends on OF && (ARM || ARCH_LAYERSCAPE)
+	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW
 	select MFD_SYSCON
 	help
@@ -177,8 +194,7 @@ config PCIE_IPROC_BCMA
 config PCIE_IPROC_MSI
 	bool "Broadcom iProc PCIe MSI support"
 	depends on PCIE_IPROC_PLATFORM || PCIE_IPROC_BCMA
-	depends on PCI_MSI
-	select PCI_MSI_IRQ_DOMAIN
+	depends on PCI_MSI_IRQ_DOMAIN
 	default ARCH_BCM_IPROC
 	help
 	  Say Y here if you want to enable MSI support for Broadcom's iProc
@@ -195,8 +211,8 @@ config PCIE_ALTERA
 
 config PCIE_ALTERA_MSI
 	bool "Altera PCIe MSI feature"
-	depends on PCIE_ALTERA && PCI_MSI
-	select PCI_MSI_IRQ_DOMAIN
+	depends on PCIE_ALTERA
+	depends on PCI_MSI_IRQ_DOMAIN
 	help
 	  Say Y here if you want PCIe MSI support for the Altera FPGA.
 	  This MSI driver supports Altera MSI to GIC controller IP.
@@ -204,6 +220,7 @@ config PCIE_ALTERA_MSI
 config PCI_HISI
 	depends on OF && ARM64
 	bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
+	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
 	select PCIE_DW
 	help
@@ -213,6 +230,7 @@ config PCI_HISI
 config PCIE_QCOM
 	bool "Qualcomm PCIe controller"
 	depends on ARCH_QCOM && OF
+	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW
 	select PCIEPORTBUS
 	help
@@ -237,6 +255,7 @@ config PCI_HOST_THUNDER_ECAM
 config PCIE_ARMADA_8K
 	bool "Marvell Armada-8K PCIe controller"
 	depends on ARCH_MVEBU
+	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW
 	select PCIEPORTBUS
 	help
@@ -245,4 +264,14 @@ config PCIE_ARMADA_8K
 	  Designware hardware and therefore the driver re-uses the
 	  Designware core functions to implement the driver.
 
+config PCIE_ARTPEC6
+	bool "Axis ARTPEC-6 PCIe controller"
+	depends on MACH_ARTPEC6
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_DW
+	select PCIEPORTBUS
+	help
+	  Say Y here to enable PCIe controller support on Axis ARTPEC-6
+	  SoCs.  This PCIe controller uses the DesignWare core.
+
 endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 9c8698e89e96..88434101e4c4 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
 obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
+obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
 obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
 obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
 obj-$(CONFIG_PCIE_RCAR) += pcie-rcar.o
@@ -29,3 +30,4 @@ obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
 obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
+obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
new file mode 100644
index 000000000000..ef9893fa3176
--- /dev/null
+++ b/drivers/pci/host/pci-aardvark.c
@@ -0,0 +1,1001 @@
+/*
+ * Driver for the Aardvark PCIe controller, used on Marvell Armada
+ * 3700.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Author: Hezi Shahmoon <hezi.shahmoon@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+
+/* PCIe core registers */
+#define PCIE_CORE_CMD_STATUS_REG				0x4
+#define     PCIE_CORE_CMD_IO_ACCESS_EN				BIT(0)
+#define     PCIE_CORE_CMD_MEM_ACCESS_EN				BIT(1)
+#define     PCIE_CORE_CMD_MEM_IO_REQ_EN				BIT(2)
+#define PCIE_CORE_DEV_CTRL_STATS_REG				0xc8
+#define     PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE	(0 << 4)
+#define     PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT	5
+#define     PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE		(0 << 11)
+#define     PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT	12
+#define PCIE_CORE_LINK_CTRL_STAT_REG				0xd0
+#define     PCIE_CORE_LINK_L0S_ENTRY				BIT(0)
+#define     PCIE_CORE_LINK_TRAINING				BIT(5)
+#define     PCIE_CORE_LINK_WIDTH_SHIFT				20
+#define PCIE_CORE_ERR_CAPCTL_REG				0x118
+#define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX			BIT(5)
+#define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN			BIT(6)
+#define     PCIE_CORE_ERR_CAPCTL_ECRC_CHCK			BIT(7)
+#define     PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV			BIT(8)
+
+/* PIO registers base address and register offsets */
+#define PIO_BASE_ADDR				0x4000
+#define PIO_CTRL				(PIO_BASE_ADDR + 0x0)
+#define   PIO_CTRL_TYPE_MASK			GENMASK(3, 0)
+#define   PIO_CTRL_ADDR_WIN_DISABLE		BIT(24)
+#define PIO_STAT				(PIO_BASE_ADDR + 0x4)
+#define   PIO_COMPLETION_STATUS_SHIFT		7
+#define   PIO_COMPLETION_STATUS_MASK		GENMASK(9, 7)
+#define   PIO_COMPLETION_STATUS_OK		0
+#define   PIO_COMPLETION_STATUS_UR		1
+#define   PIO_COMPLETION_STATUS_CRS		2
+#define   PIO_COMPLETION_STATUS_CA		4
+#define   PIO_NON_POSTED_REQ			BIT(0)
+#define PIO_ADDR_LS				(PIO_BASE_ADDR + 0x8)
+#define PIO_ADDR_MS				(PIO_BASE_ADDR + 0xc)
+#define PIO_WR_DATA				(PIO_BASE_ADDR + 0x10)
+#define PIO_WR_DATA_STRB			(PIO_BASE_ADDR + 0x14)
+#define PIO_RD_DATA				(PIO_BASE_ADDR + 0x18)
+#define PIO_START				(PIO_BASE_ADDR + 0x1c)
+#define PIO_ISR					(PIO_BASE_ADDR + 0x20)
+#define PIO_ISRM				(PIO_BASE_ADDR + 0x24)
+
+/* Aardvark Control registers */
+#define CONTROL_BASE_ADDR			0x4800
+#define PCIE_CORE_CTRL0_REG			(CONTROL_BASE_ADDR + 0x0)
+#define     PCIE_GEN_SEL_MSK			0x3
+#define     PCIE_GEN_SEL_SHIFT			0x0
+#define     SPEED_GEN_1				0
+#define     SPEED_GEN_2				1
+#define     SPEED_GEN_3				2
+#define     IS_RC_MSK				1
+#define     IS_RC_SHIFT				2
+#define     LANE_CNT_MSK			0x18
+#define     LANE_CNT_SHIFT			0x3
+#define     LANE_COUNT_1			(0 << LANE_CNT_SHIFT)
+#define     LANE_COUNT_2			(1 << LANE_CNT_SHIFT)
+#define     LANE_COUNT_4			(2 << LANE_CNT_SHIFT)
+#define     LANE_COUNT_8			(3 << LANE_CNT_SHIFT)
+#define     LINK_TRAINING_EN			BIT(6)
+#define     LEGACY_INTA				BIT(28)
+#define     LEGACY_INTB				BIT(29)
+#define     LEGACY_INTC				BIT(30)
+#define     LEGACY_INTD				BIT(31)
+#define PCIE_CORE_CTRL1_REG			(CONTROL_BASE_ADDR + 0x4)
+#define     HOT_RESET_GEN			BIT(0)
+#define PCIE_CORE_CTRL2_REG			(CONTROL_BASE_ADDR + 0x8)
+#define     PCIE_CORE_CTRL2_RESERVED		0x7
+#define     PCIE_CORE_CTRL2_TD_ENABLE		BIT(4)
+#define     PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE	BIT(5)
+#define     PCIE_CORE_CTRL2_OB_WIN_ENABLE	BIT(6)
+#define     PCIE_CORE_CTRL2_MSI_ENABLE		BIT(10)
+#define PCIE_ISR0_REG				(CONTROL_BASE_ADDR + 0x40)
+#define PCIE_ISR0_MASK_REG			(CONTROL_BASE_ADDR + 0x44)
+#define     PCIE_ISR0_MSI_INT_PENDING		BIT(24)
+#define     PCIE_ISR0_INTX_ASSERT(val)		BIT(16 + (val))
+#define     PCIE_ISR0_INTX_DEASSERT(val)	BIT(20 + (val))
+#define	    PCIE_ISR0_ALL_MASK			GENMASK(26, 0)
+#define PCIE_ISR1_REG				(CONTROL_BASE_ADDR + 0x48)
+#define PCIE_ISR1_MASK_REG			(CONTROL_BASE_ADDR + 0x4C)
+#define     PCIE_ISR1_POWER_STATE_CHANGE	BIT(4)
+#define     PCIE_ISR1_FLUSH			BIT(5)
+#define     PCIE_ISR1_ALL_MASK			GENMASK(5, 4)
+#define PCIE_MSI_ADDR_LOW_REG			(CONTROL_BASE_ADDR + 0x50)
+#define PCIE_MSI_ADDR_HIGH_REG			(CONTROL_BASE_ADDR + 0x54)
+#define PCIE_MSI_STATUS_REG			(CONTROL_BASE_ADDR + 0x58)
+#define PCIE_MSI_MASK_REG			(CONTROL_BASE_ADDR + 0x5C)
+#define PCIE_MSI_PAYLOAD_REG			(CONTROL_BASE_ADDR + 0x9C)
+
+/* PCIe window configuration */
+#define OB_WIN_BASE_ADDR			0x4c00
+#define OB_WIN_BLOCK_SIZE			0x20
+#define OB_WIN_REG_ADDR(win, offset)		(OB_WIN_BASE_ADDR + \
+						 OB_WIN_BLOCK_SIZE * (win) + \
+						 (offset))
+#define OB_WIN_MATCH_LS(win)			OB_WIN_REG_ADDR(win, 0x00)
+#define OB_WIN_MATCH_MS(win)			OB_WIN_REG_ADDR(win, 0x04)
+#define OB_WIN_REMAP_LS(win)			OB_WIN_REG_ADDR(win, 0x08)
+#define OB_WIN_REMAP_MS(win)			OB_WIN_REG_ADDR(win, 0x0c)
+#define OB_WIN_MASK_LS(win)			OB_WIN_REG_ADDR(win, 0x10)
+#define OB_WIN_MASK_MS(win)			OB_WIN_REG_ADDR(win, 0x14)
+#define OB_WIN_ACTIONS(win)			OB_WIN_REG_ADDR(win, 0x18)
+
+/* PCIe window types */
+#define OB_PCIE_MEM				0x0
+#define OB_PCIE_IO				0x4
+
+/* LMI registers base address and register offsets */
+#define LMI_BASE_ADDR				0x6000
+#define CFG_REG					(LMI_BASE_ADDR + 0x0)
+#define     LTSSM_SHIFT				24
+#define     LTSSM_MASK				0x3f
+#define     LTSSM_L0				0x10
+#define     RC_BAR_CONFIG			0x300
+
+/* PCIe core controller registers */
+#define CTRL_CORE_BASE_ADDR			0x18000
+#define CTRL_CONFIG_REG				(CTRL_CORE_BASE_ADDR + 0x0)
+#define     CTRL_MODE_SHIFT			0x0
+#define     CTRL_MODE_MASK			0x1
+#define     PCIE_CORE_MODE_DIRECT		0x0
+#define     PCIE_CORE_MODE_COMMAND		0x1
+
+/* PCIe Central Interrupts Registers */
+#define CENTRAL_INT_BASE_ADDR			0x1b000
+#define HOST_CTRL_INT_STATUS_REG		(CENTRAL_INT_BASE_ADDR + 0x0)
+#define HOST_CTRL_INT_MASK_REG			(CENTRAL_INT_BASE_ADDR + 0x4)
+#define     PCIE_IRQ_CMDQ_INT			BIT(0)
+#define     PCIE_IRQ_MSI_STATUS_INT		BIT(1)
+#define     PCIE_IRQ_CMD_SENT_DONE		BIT(3)
+#define     PCIE_IRQ_DMA_INT			BIT(4)
+#define     PCIE_IRQ_IB_DXFERDONE		BIT(5)
+#define     PCIE_IRQ_OB_DXFERDONE		BIT(6)
+#define     PCIE_IRQ_OB_RXFERDONE		BIT(7)
+#define     PCIE_IRQ_COMPQ_INT			BIT(12)
+#define     PCIE_IRQ_DIR_RD_DDR_DET		BIT(13)
+#define     PCIE_IRQ_DIR_WR_DDR_DET		BIT(14)
+#define     PCIE_IRQ_CORE_INT			BIT(16)
+#define     PCIE_IRQ_CORE_INT_PIO		BIT(17)
+#define     PCIE_IRQ_DPMU_INT			BIT(18)
+#define     PCIE_IRQ_PCIE_MIS_INT		BIT(19)
+#define     PCIE_IRQ_MSI_INT1_DET		BIT(20)
+#define     PCIE_IRQ_MSI_INT2_DET		BIT(21)
+#define     PCIE_IRQ_RC_DBELL_DET		BIT(22)
+#define     PCIE_IRQ_EP_STATUS			BIT(23)
+#define     PCIE_IRQ_ALL_MASK			0xfff0fb
+#define     PCIE_IRQ_ENABLE_INTS_MASK		PCIE_IRQ_CORE_INT
+
+/* Transaction types */
+#define PCIE_CONFIG_RD_TYPE0			0x8
+#define PCIE_CONFIG_RD_TYPE1			0x9
+#define PCIE_CONFIG_WR_TYPE0			0xa
+#define PCIE_CONFIG_WR_TYPE1			0xb
+
+/* PCI_BDF shifts 8bit, so we need extra 4bit shift */
+#define PCIE_BDF(dev)				(dev << 4)
+#define PCIE_CONF_BUS(bus)			(((bus) & 0xff) << 20)
+#define PCIE_CONF_DEV(dev)			(((dev) & 0x1f) << 15)
+#define PCIE_CONF_FUNC(fun)			(((fun) & 0x7)	<< 12)
+#define PCIE_CONF_REG(reg)			((reg) & 0xffc)
+#define PCIE_CONF_ADDR(bus, devfn, where)	\
+	(PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn))	| \
+	 PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where))
+
+#define PIO_TIMEOUT_MS			1
+
+#define LINK_WAIT_MAX_RETRIES		10
+#define LINK_WAIT_USLEEP_MIN		90000
+#define LINK_WAIT_USLEEP_MAX		100000
+
+#define LEGACY_IRQ_NUM			4
+#define MSI_IRQ_NUM			32
+
+struct advk_pcie {
+	struct platform_device *pdev;
+	void __iomem *base;
+	struct list_head resources;
+	struct irq_domain *irq_domain;
+	struct irq_chip irq_chip;
+	struct msi_controller msi;
+	struct irq_domain *msi_domain;
+	struct irq_chip msi_irq_chip;
+	DECLARE_BITMAP(msi_irq_in_use, MSI_IRQ_NUM);
+	struct mutex msi_used_lock;
+	u16 msi_msg;
+	int root_bus_nr;
+};
+
+static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
+{
+	writel(val, pcie->base + reg);
+}
+
+static inline u32 advk_readl(struct advk_pcie *pcie, u64 reg)
+{
+	return readl(pcie->base + reg);
+}
+
+static int advk_pcie_link_up(struct advk_pcie *pcie)
+{
+	u32 val, ltssm_state;
+
+	val = advk_readl(pcie, CFG_REG);
+	ltssm_state = (val >> LTSSM_SHIFT) & LTSSM_MASK;
+	return ltssm_state >= LTSSM_L0;
+}
+
+static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
+{
+	int retries;
+
+	/* check if the link is up or not */
+	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+		if (advk_pcie_link_up(pcie)) {
+			dev_info(&pcie->pdev->dev, "link up\n");
+			return 0;
+		}
+
+		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+	}
+
+	dev_err(&pcie->pdev->dev, "link never came up\n");
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * Set PCIe address window register which could be used for memory
+ * mapping.
+ */
+static void advk_pcie_set_ob_win(struct advk_pcie *pcie,
+				 u32 win_num, u32 match_ms,
+				 u32 match_ls, u32 mask_ms,
+				 u32 mask_ls, u32 remap_ms,
+				 u32 remap_ls, u32 action)
+{
+	advk_writel(pcie, match_ls, OB_WIN_MATCH_LS(win_num));
+	advk_writel(pcie, match_ms, OB_WIN_MATCH_MS(win_num));
+	advk_writel(pcie, mask_ms, OB_WIN_MASK_MS(win_num));
+	advk_writel(pcie, mask_ls, OB_WIN_MASK_LS(win_num));
+	advk_writel(pcie, remap_ms, OB_WIN_REMAP_MS(win_num));
+	advk_writel(pcie, remap_ls, OB_WIN_REMAP_LS(win_num));
+	advk_writel(pcie, action, OB_WIN_ACTIONS(win_num));
+	advk_writel(pcie, match_ls | BIT(0), OB_WIN_MATCH_LS(win_num));
+}
+
+static void advk_pcie_setup_hw(struct advk_pcie *pcie)
+{
+	u32 reg;
+	int i;
+
+	/* Point PCIe unit MBUS decode windows to DRAM space */
+	for (i = 0; i < 8; i++)
+		advk_pcie_set_ob_win(pcie, i, 0, 0, 0, 0, 0, 0, 0);
+
+	/* Set to Direct mode */
+	reg = advk_readl(pcie, CTRL_CONFIG_REG);
+	reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
+	reg |= ((PCIE_CORE_MODE_DIRECT & CTRL_MODE_MASK) << CTRL_MODE_SHIFT);
+	advk_writel(pcie, reg, CTRL_CONFIG_REG);
+
+	/* Set PCI global control register to RC mode */
+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+	reg |= (IS_RC_MSK << IS_RC_SHIFT);
+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+	/* Set Advanced Error Capabilities and Control PF0 register */
+	reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
+		PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |
+		PCIE_CORE_ERR_CAPCTL_ECRC_CHCK |
+		PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV;
+	advk_writel(pcie, reg, PCIE_CORE_ERR_CAPCTL_REG);
+
+	/* Set PCIe Device Control and Status 1 PF0 register */
+	reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
+		(7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
+		PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
+		PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT;
+	advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
+
+	/* Program PCIe Control 2 to disable strict ordering */
+	reg = PCIE_CORE_CTRL2_RESERVED |
+		PCIE_CORE_CTRL2_TD_ENABLE;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+
+	/* Set GEN2 */
+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+	reg &= ~PCIE_GEN_SEL_MSK;
+	reg |= SPEED_GEN_2;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+	/* Set lane X1 */
+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+	reg &= ~LANE_CNT_MSK;
+	reg |= LANE_COUNT_1;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+	/* Enable link training */
+	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+	reg |= LINK_TRAINING_EN;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+	/* Enable MSI */
+	reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
+	reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+
+	/* Clear all interrupts */
+	advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_REG);
+	advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG);
+	advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG);
+
+	/* Disable All ISR0/1 Sources */
+	reg = PCIE_ISR0_ALL_MASK;
+	reg &= ~PCIE_ISR0_MSI_INT_PENDING;
+	advk_writel(pcie, reg, PCIE_ISR0_MASK_REG);
+
+	advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG);
+
+	/* Unmask all MSI's */
+	advk_writel(pcie, 0, PCIE_MSI_MASK_REG);
+
+	/* Enable summary interrupt for GIC SPI source */
+	reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK);
+	advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG);
+
+	reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
+	reg |= PCIE_CORE_CTRL2_OB_WIN_ENABLE;
+	advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+
+	/* Bypass the address window mapping for PIO */
+	reg = advk_readl(pcie, PIO_CTRL);
+	reg |= PIO_CTRL_ADDR_WIN_DISABLE;
+	advk_writel(pcie, reg, PIO_CTRL);
+
+	/* Start link training */
+	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
+	reg |= PCIE_CORE_LINK_TRAINING;
+	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+
+	advk_pcie_wait_for_link(pcie);
+
+	reg = PCIE_CORE_LINK_L0S_ENTRY |
+		(1 << PCIE_CORE_LINK_WIDTH_SHIFT);
+	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+
+	reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
+	reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
+		PCIE_CORE_CMD_IO_ACCESS_EN |
+		PCIE_CORE_CMD_MEM_IO_REQ_EN;
+	advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
+}
+
+static void advk_pcie_check_pio_status(struct advk_pcie *pcie)
+{
+	u32 reg;
+	unsigned int status;
+	char *strcomp_status, *str_posted;
+
+	reg = advk_readl(pcie, PIO_STAT);
+	status = (reg & PIO_COMPLETION_STATUS_MASK) >>
+		PIO_COMPLETION_STATUS_SHIFT;
+
+	if (!status)
+		return;
+
+	switch (status) {
+	case PIO_COMPLETION_STATUS_UR:
+		strcomp_status = "UR";
+		break;
+	case PIO_COMPLETION_STATUS_CRS:
+		strcomp_status = "CRS";
+		break;
+	case PIO_COMPLETION_STATUS_CA:
+		strcomp_status = "CA";
+		break;
+	default:
+		strcomp_status = "Unknown";
+		break;
+	}
+
+	if (reg & PIO_NON_POSTED_REQ)
+		str_posted = "Non-posted";
+	else
+		str_posted = "Posted";
+
+	dev_err(&pcie->pdev->dev, "%s PIO Response Status: %s, %#x @ %#x\n",
+		str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
+}
+
+static int advk_pcie_wait_pio(struct advk_pcie *pcie)
+{
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(PIO_TIMEOUT_MS);
+
+	while (time_before(jiffies, timeout)) {
+		u32 start, isr;
+
+		start = advk_readl(pcie, PIO_START);
+		isr = advk_readl(pcie, PIO_ISR);
+		if (!start && isr)
+			return 0;
+	}
+
+	dev_err(&pcie->pdev->dev, "config read/write timed out\n");
+	return -ETIMEDOUT;
+}
+
+static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
+			     int where, int size, u32 *val)
+{
+	struct advk_pcie *pcie = bus->sysdata;
+	u32 reg;
+	int ret;
+
+	if (PCI_SLOT(devfn) != 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	/* Start PIO */
+	advk_writel(pcie, 0, PIO_START);
+	advk_writel(pcie, 1, PIO_ISR);
+
+	/* Program the control register */
+	reg = advk_readl(pcie, PIO_CTRL);
+	reg &= ~PIO_CTRL_TYPE_MASK;
+	if (bus->number ==  pcie->root_bus_nr)
+		reg |= PCIE_CONFIG_RD_TYPE0;
+	else
+		reg |= PCIE_CONFIG_RD_TYPE1;
+	advk_writel(pcie, reg, PIO_CTRL);
+
+	/* Program the address registers */
+	reg = PCIE_BDF(devfn) | PCIE_CONF_REG(where);
+	advk_writel(pcie, reg, PIO_ADDR_LS);
+	advk_writel(pcie, 0, PIO_ADDR_MS);
+
+	/* Program the data strobe */
+	advk_writel(pcie, 0xf, PIO_WR_DATA_STRB);
+
+	/* Start the transfer */
+	advk_writel(pcie, 1, PIO_START);
+
+	ret = advk_pcie_wait_pio(pcie);
+	if (ret < 0)
+		return PCIBIOS_SET_FAILED;
+
+	advk_pcie_check_pio_status(pcie);
+
+	/* Get the read result */
+	*val = advk_readl(pcie, PIO_RD_DATA);
+	if (size == 1)
+		*val = (*val >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8 * (where & 3))) & 0xffff;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+				int where, int size, u32 val)
+{
+	struct advk_pcie *pcie = bus->sysdata;
+	u32 reg;
+	u32 data_strobe = 0x0;
+	int offset;
+	int ret;
+
+	if (PCI_SLOT(devfn) != 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (where % size)
+		return PCIBIOS_SET_FAILED;
+
+	/* Start PIO */
+	advk_writel(pcie, 0, PIO_START);
+	advk_writel(pcie, 1, PIO_ISR);
+
+	/* Program the control register */
+	reg = advk_readl(pcie, PIO_CTRL);
+	reg &= ~PIO_CTRL_TYPE_MASK;
+	if (bus->number == pcie->root_bus_nr)
+		reg |= PCIE_CONFIG_WR_TYPE0;
+	else
+		reg |= PCIE_CONFIG_WR_TYPE1;
+	advk_writel(pcie, reg, PIO_CTRL);
+
+	/* Program the address registers */
+	reg = PCIE_CONF_ADDR(bus->number, devfn, where);
+	advk_writel(pcie, reg, PIO_ADDR_LS);
+	advk_writel(pcie, 0, PIO_ADDR_MS);
+
+	/* Calculate the write strobe */
+	offset      = where & 0x3;
+	reg         = val << (8 * offset);
+	data_strobe = GENMASK(size - 1, 0) << offset;
+
+	/* Program the data register */
+	advk_writel(pcie, reg, PIO_WR_DATA);
+
+	/* Program the data strobe */
+	advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB);
+
+	/* Start the transfer */
+	advk_writel(pcie, 1, PIO_START);
+
+	ret = advk_pcie_wait_pio(pcie);
+	if (ret < 0)
+		return PCIBIOS_SET_FAILED;
+
+	advk_pcie_check_pio_status(pcie);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops advk_pcie_ops = {
+	.read = advk_pcie_rd_conf,
+	.write = advk_pcie_wr_conf,
+};
+
+static int advk_pcie_alloc_msi(struct advk_pcie *pcie)
+{
+	int hwirq;
+
+	mutex_lock(&pcie->msi_used_lock);
+	hwirq = find_first_zero_bit(pcie->msi_irq_in_use, MSI_IRQ_NUM);
+	if (hwirq >= MSI_IRQ_NUM)
+		hwirq = -ENOSPC;
+	else
+		set_bit(hwirq, pcie->msi_irq_in_use);
+	mutex_unlock(&pcie->msi_used_lock);
+
+	return hwirq;
+}
+
+static void advk_pcie_free_msi(struct advk_pcie *pcie, int hwirq)
+{
+	mutex_lock(&pcie->msi_used_lock);
+	if (!test_bit(hwirq, pcie->msi_irq_in_use))
+		dev_err(&pcie->pdev->dev, "trying to free unused MSI#%d\n",
+			hwirq);
+	else
+		clear_bit(hwirq, pcie->msi_irq_in_use);
+	mutex_unlock(&pcie->msi_used_lock);
+}
+
+static int advk_pcie_setup_msi_irq(struct msi_controller *chip,
+				   struct pci_dev *pdev,
+				   struct msi_desc *desc)
+{
+	struct advk_pcie *pcie = pdev->bus->sysdata;
+	struct msi_msg msg;
+	int virq, hwirq;
+	phys_addr_t msi_msg_phys;
+
+	/* We support MSI, but not MSI-X */
+	if (desc->msi_attrib.is_msix)
+		return -EINVAL;
+
+	hwirq = advk_pcie_alloc_msi(pcie);
+	if (hwirq < 0)
+		return hwirq;
+
+	virq = irq_create_mapping(pcie->msi_domain, hwirq);
+	if (!virq) {
+		advk_pcie_free_msi(pcie, hwirq);
+		return -EINVAL;
+	}
+
+	irq_set_msi_desc(virq, desc);
+
+	msi_msg_phys = virt_to_phys(&pcie->msi_msg);
+
+	msg.address_lo = lower_32_bits(msi_msg_phys);
+	msg.address_hi = upper_32_bits(msi_msg_phys);
+	msg.data = virq;
+
+	pci_write_msi_msg(virq, &msg);
+
+	return 0;
+}
+
+static void advk_pcie_teardown_msi_irq(struct msi_controller *chip,
+				       unsigned int irq)
+{
+	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_desc *msi = irq_data_get_msi_desc(d);
+	struct advk_pcie *pcie = msi_desc_to_pci_sysdata(msi);
+	unsigned long hwirq = d->hwirq;
+
+	irq_dispose_mapping(irq);
+	advk_pcie_free_msi(pcie, hwirq);
+}
+
+static int advk_pcie_msi_map(struct irq_domain *domain,
+			     unsigned int virq, irq_hw_number_t hw)
+{
+	struct advk_pcie *pcie = domain->host_data;
+
+	irq_set_chip_and_handler(virq, &pcie->msi_irq_chip,
+				 handle_simple_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops advk_pcie_msi_irq_ops = {
+	.map = advk_pcie_msi_map,
+};
+
+static void advk_pcie_irq_mask(struct irq_data *d)
+{
+	struct advk_pcie *pcie = d->domain->host_data;
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+	u32 mask;
+
+	mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
+	mask |= PCIE_ISR0_INTX_ASSERT(hwirq);
+	advk_writel(pcie, mask, PCIE_ISR0_MASK_REG);
+}
+
+static void advk_pcie_irq_unmask(struct irq_data *d)
+{
+	struct advk_pcie *pcie = d->domain->host_data;
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+	u32 mask;
+
+	mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
+	mask &= ~PCIE_ISR0_INTX_ASSERT(hwirq);
+	advk_writel(pcie, mask, PCIE_ISR0_MASK_REG);
+}
+
+static int advk_pcie_irq_map(struct irq_domain *h,
+			     unsigned int virq, irq_hw_number_t hwirq)
+{
+	struct advk_pcie *pcie = h->host_data;
+
+	advk_pcie_irq_mask(irq_get_irq_data(virq));
+	irq_set_status_flags(virq, IRQ_LEVEL);
+	irq_set_chip_and_handler(virq, &pcie->irq_chip,
+				 handle_level_irq);
+	irq_set_chip_data(virq, pcie);
+
+	return 0;
+}
+
+static const struct irq_domain_ops advk_pcie_irq_domain_ops = {
+	.map = advk_pcie_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
+{
+	struct device *dev = &pcie->pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct irq_chip *msi_irq_chip;
+	struct msi_controller *msi;
+	phys_addr_t msi_msg_phys;
+	int ret;
+
+	msi_irq_chip = &pcie->msi_irq_chip;
+
+	msi_irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-msi",
+					    dev_name(dev));
+	if (!msi_irq_chip->name)
+		return -ENOMEM;
+
+	msi_irq_chip->irq_enable = pci_msi_unmask_irq;
+	msi_irq_chip->irq_disable = pci_msi_mask_irq;
+	msi_irq_chip->irq_mask = pci_msi_mask_irq;
+	msi_irq_chip->irq_unmask = pci_msi_unmask_irq;
+
+	msi = &pcie->msi;
+
+	msi->setup_irq = advk_pcie_setup_msi_irq;
+	msi->teardown_irq = advk_pcie_teardown_msi_irq;
+	msi->of_node = node;
+
+	mutex_init(&pcie->msi_used_lock);
+
+	msi_msg_phys = virt_to_phys(&pcie->msi_msg);
+
+	advk_writel(pcie, lower_32_bits(msi_msg_phys),
+		    PCIE_MSI_ADDR_LOW_REG);
+	advk_writel(pcie, upper_32_bits(msi_msg_phys),
+		    PCIE_MSI_ADDR_HIGH_REG);
+
+	pcie->msi_domain =
+		irq_domain_add_linear(NULL, MSI_IRQ_NUM,
+				      &advk_pcie_msi_irq_ops, pcie);
+	if (!pcie->msi_domain)
+		return -ENOMEM;
+
+	ret = of_pci_msi_chip_add(msi);
+	if (ret < 0) {
+		irq_domain_remove(pcie->msi_domain);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void advk_pcie_remove_msi_irq_domain(struct advk_pcie *pcie)
+{
+	of_pci_msi_chip_remove(&pcie->msi);
+	irq_domain_remove(pcie->msi_domain);
+}
+
+static int advk_pcie_init_irq_domain(struct advk_pcie *pcie)
+{
+	struct device *dev = &pcie->pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct device_node *pcie_intc_node;
+	struct irq_chip *irq_chip;
+
+	pcie_intc_node =  of_get_next_child(node, NULL);
+	if (!pcie_intc_node) {
+		dev_err(dev, "No PCIe Intc node found\n");
+		return -ENODEV;
+	}
+
+	irq_chip = &pcie->irq_chip;
+
+	irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-irq",
+					dev_name(dev));
+	if (!irq_chip->name) {
+		of_node_put(pcie_intc_node);
+		return -ENOMEM;
+	}
+
+	irq_chip->irq_mask = advk_pcie_irq_mask;
+	irq_chip->irq_mask_ack = advk_pcie_irq_mask;
+	irq_chip->irq_unmask = advk_pcie_irq_unmask;
+
+	pcie->irq_domain =
+		irq_domain_add_linear(pcie_intc_node, LEGACY_IRQ_NUM,
+				      &advk_pcie_irq_domain_ops, pcie);
+	if (!pcie->irq_domain) {
+		dev_err(dev, "Failed to get a INTx IRQ domain\n");
+		of_node_put(pcie_intc_node);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void advk_pcie_remove_irq_domain(struct advk_pcie *pcie)
+{
+	irq_domain_remove(pcie->irq_domain);
+}
+
+static void advk_pcie_handle_msi(struct advk_pcie *pcie)
+{
+	u32 msi_val, msi_mask, msi_status, msi_idx;
+	u16 msi_data;
+
+	msi_mask = advk_readl(pcie, PCIE_MSI_MASK_REG);
+	msi_val = advk_readl(pcie, PCIE_MSI_STATUS_REG);
+	msi_status = msi_val & ~msi_mask;
+
+	for (msi_idx = 0; msi_idx < MSI_IRQ_NUM; msi_idx++) {
+		if (!(BIT(msi_idx) & msi_status))
+			continue;
+
+		advk_writel(pcie, BIT(msi_idx), PCIE_MSI_STATUS_REG);
+		msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & 0xFF;
+		generic_handle_irq(msi_data);
+	}
+
+	advk_writel(pcie, PCIE_ISR0_MSI_INT_PENDING,
+		    PCIE_ISR0_REG);
+}
+
+static void advk_pcie_handle_int(struct advk_pcie *pcie)
+{
+	u32 val, mask, status;
+	int i, virq;
+
+	val = advk_readl(pcie, PCIE_ISR0_REG);
+	mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
+	status = val & ((~mask) & PCIE_ISR0_ALL_MASK);
+
+	if (!status) {
+		advk_writel(pcie, val, PCIE_ISR0_REG);
+		return;
+	}
+
+	/* Process MSI interrupts */
+	if (status & PCIE_ISR0_MSI_INT_PENDING)
+		advk_pcie_handle_msi(pcie);
+
+	/* Process legacy interrupts */
+	for (i = 0; i < LEGACY_IRQ_NUM; i++) {
+		if (!(status & PCIE_ISR0_INTX_ASSERT(i)))
+			continue;
+
+		advk_writel(pcie, PCIE_ISR0_INTX_ASSERT(i),
+			    PCIE_ISR0_REG);
+
+		virq = irq_find_mapping(pcie->irq_domain, i);
+		generic_handle_irq(virq);
+	}
+}
+
+static irqreturn_t advk_pcie_irq_handler(int irq, void *arg)
+{
+	struct advk_pcie *pcie = arg;
+	u32 status;
+
+	status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
+	if (!(status & PCIE_IRQ_CORE_INT))
+		return IRQ_NONE;
+
+	advk_pcie_handle_int(pcie);
+
+	/* Clear interrupt */
+	advk_writel(pcie, PCIE_IRQ_CORE_INT, HOST_CTRL_INT_STATUS_REG);
+
+	return IRQ_HANDLED;
+}
+
+static int advk_pcie_parse_request_of_pci_ranges(struct advk_pcie *pcie)
+{
+	int err, res_valid = 0;
+	struct device *dev = &pcie->pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct resource_entry *win;
+	resource_size_t iobase;
+
+	INIT_LIST_HEAD(&pcie->resources);
+
+	err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pcie->resources,
+					       &iobase);
+	if (err)
+		return err;
+
+	err = devm_request_pci_bus_resources(dev, &pcie->resources);
+	if (err)
+		goto out_release_res;
+
+	resource_list_for_each_entry(win, &pcie->resources) {
+		struct resource *res = win->res;
+
+		switch (resource_type(res)) {
+		case IORESOURCE_IO:
+			advk_pcie_set_ob_win(pcie, 1,
+					     upper_32_bits(res->start),
+					     lower_32_bits(res->start),
+					     0,	0xF8000000, 0,
+					     lower_32_bits(res->start),
+					     OB_PCIE_IO);
+			err = pci_remap_iospace(res, iobase);
+			if (err)
+				dev_warn(dev, "error %d: failed to map resource %pR\n",
+					 err, res);
+			break;
+		case IORESOURCE_MEM:
+			advk_pcie_set_ob_win(pcie, 0,
+					     upper_32_bits(res->start),
+					     lower_32_bits(res->start),
+					     0x0, 0xF8000000, 0,
+					     lower_32_bits(res->start),
+					     (2 << 20) | OB_PCIE_MEM);
+			res_valid |= !(res->flags & IORESOURCE_PREFETCH);
+			break;
+		case IORESOURCE_BUS:
+			pcie->root_bus_nr = res->start;
+			break;
+		}
+	}
+
+	if (!res_valid) {
+		dev_err(dev, "non-prefetchable memory resource required\n");
+		err = -EINVAL;
+		goto out_release_res;
+	}
+
+	return 0;
+
+out_release_res:
+	pci_free_resource_list(&pcie->resources);
+	return err;
+}
+
+static int advk_pcie_probe(struct platform_device *pdev)
+{
+	struct advk_pcie *pcie;
+	struct resource *res;
+	struct pci_bus *bus, *child;
+	struct msi_controller *msi;
+	struct device_node *msi_node;
+	int ret, irq;
+
+	pcie = devm_kzalloc(&pdev->dev, sizeof(struct advk_pcie),
+			    GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	pcie->pdev = pdev;
+	platform_set_drvdata(pdev, pcie);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pcie->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pcie->base)) {
+		dev_err(&pdev->dev, "Failed to map registers\n");
+		return PTR_ERR(pcie->base);
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(&pdev->dev, irq, advk_pcie_irq_handler,
+			       IRQF_SHARED | IRQF_NO_THREAD, "advk-pcie",
+			       pcie);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register interrupt\n");
+		return ret;
+	}
+
+	ret = advk_pcie_parse_request_of_pci_ranges(pcie);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to parse resources\n");
+		return ret;
+	}
+
+	advk_pcie_setup_hw(pcie);
+
+	ret = advk_pcie_init_irq_domain(pcie);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize irq\n");
+		return ret;
+	}
+
+	ret = advk_pcie_init_msi_irq_domain(pcie);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize irq\n");
+		advk_pcie_remove_irq_domain(pcie);
+		return ret;
+	}
+
+	msi_node = of_parse_phandle(pdev->dev.of_node, "msi-parent", 0);
+	if (msi_node)
+		msi = of_pci_find_msi_chip_by_node(msi_node);
+	else
+		msi = NULL;
+
+	bus = pci_scan_root_bus_msi(&pdev->dev, 0, &advk_pcie_ops,
+				    pcie, &pcie->resources, &pcie->msi);
+	if (!bus) {
+		advk_pcie_remove_msi_irq_domain(pcie);
+		advk_pcie_remove_irq_domain(pcie);
+		return -ENOMEM;
+	}
+
+	pci_bus_assign_resources(bus);
+
+	list_for_each_entry(child, &bus->children, node)
+		pcie_bus_configure_settings(child);
+
+	pci_bus_add_devices(bus);
+
+	return 0;
+}
+
+static const struct of_device_id advk_pcie_of_match_table[] = {
+	{ .compatible = "marvell,armada-3700-pcie", },
+	{},
+};
+
+static struct platform_driver advk_pcie_driver = {
+	.driver = {
+		.name = "advk-pcie",
+		.of_match_table = advk_pcie_of_match_table,
+		/* Driver unloading/unbinding currently not supported */
+		.suppress_bind_attrs = true,
+	},
+	.probe = advk_pcie_probe,
+};
+builtin_platform_driver(advk_pcie_driver);
diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
index f441130407e7..81b3949a26db 100644
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -181,14 +181,14 @@ static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
 
 	if (!pcie_intc_node) {
 		dev_err(dev, "No PCIe Intc node found\n");
-		return PTR_ERR(pcie_intc_node);
+		return -ENODEV;
 	}
 
 	pp->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
 					       &intx_domain_ops, pp);
 	if (!pp->irq_domain) {
 		dev_err(dev, "Failed to get a INTx IRQ domain\n");
-		return PTR_ERR(pp->irq_domain);
+		return -ENODEV;
 	}
 
 	return 0;
diff --git a/drivers/pci/host/pci-host-common.c b/drivers/pci/host/pci-host-common.c
index 8cba7ab73df9..9d9d34e959b6 100644
--- a/drivers/pci/host/pci-host-common.c
+++ b/drivers/pci/host/pci-host-common.c
@@ -20,10 +20,9 @@
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 
-#include "../ecam.h"
-
 static int gen_pci_parse_request_of_pci_ranges(struct device *dev,
 		       struct list_head *resources, struct resource **bus_range)
 {
@@ -36,44 +35,34 @@ static int gen_pci_parse_request_of_pci_ranges(struct device *dev,
 	if (err)
 		return err;
 
+	err = devm_request_pci_bus_resources(dev, resources);
+	if (err)
+		return err;
+
 	resource_list_for_each_entry(win, resources) {
-		struct resource *parent, *res = win->res;
+		struct resource *res = win->res;
 
 		switch (resource_type(res)) {
 		case IORESOURCE_IO:
-			parent = &ioport_resource;
 			err = pci_remap_iospace(res, iobase);
-			if (err) {
+			if (err)
 				dev_warn(dev, "error %d: failed to map resource %pR\n",
 					 err, res);
-				continue;
-			}
 			break;
 		case IORESOURCE_MEM:
-			parent = &iomem_resource;
 			res_valid |= !(res->flags & IORESOURCE_PREFETCH);
 			break;
 		case IORESOURCE_BUS:
 			*bus_range = res;
-		default:
-			continue;
+			break;
 		}
-
-		err = devm_request_resource(dev, parent, res);
-		if (err)
-			goto out_release_res;
-	}
-
-	if (!res_valid) {
-		dev_err(dev, "non-prefetchable memory resource required\n");
-		err = -EINVAL;
-		goto out_release_res;
 	}
 
-	return 0;
+	if (res_valid)
+		return 0;
 
-out_release_res:
-	return err;
+	dev_err(dev, "non-prefetchable memory resource required\n");
+	return -EINVAL;
 }
 
 static void gen_pci_unmap_cfg(void *ptr)
@@ -155,7 +144,14 @@ int pci_host_common_probe(struct platform_device *pdev,
 
 	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
 
-	if (!pci_has_flag(PCI_PROBE_ONLY)) {
+	/*
+	 * We insert PCI resources into the iomem_resource and
+	 * ioport_resource trees in either pci_bus_claim_resources()
+	 * or pci_bus_assign_resources().
+	 */
+	if (pci_has_flag(PCI_PROBE_ONLY)) {
+		pci_bus_claim_resources(bus);
+	} else {
 		pci_bus_size_bridges(bus);
 		pci_bus_assign_resources(bus);
 
diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
index 6eaceab1bf04..c05ea9d72f69 100644
--- a/drivers/pci/host/pci-host-generic.c
+++ b/drivers/pci/host/pci-host-generic.c
@@ -20,13 +20,12 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 
-#include "../ecam.h"
-
 static struct pci_ecam_ops gen_pci_cfg_cam_bus_ops = {
 	.bus_shift	= 16,
 	.pci_ops	= {
@@ -46,8 +45,6 @@ static const struct of_device_id gen_pci_of_match[] = {
 	{ },
 };
 
-MODULE_DEVICE_TABLE(of, gen_pci_of_match);
-
 static int gen_pci_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id;
@@ -66,8 +63,4 @@ static struct platform_driver gen_pci_driver = {
 	},
 	.probe = gen_pci_probe,
 };
-module_platform_driver(gen_pci_driver);
-
-MODULE_DESCRIPTION("Generic PCI host driver");
-MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(gen_pci_driver);
diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index 7e9b2de2aa24..6955ffdb89f3 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -732,16 +732,18 @@ static void hv_msi_free(struct irq_domain *domain, struct msi_domain_info *info,
 
 	pdev = msi_desc_to_pci_dev(msi);
 	hbus = info->data;
-	hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn));
-	if (!hpdev)
+	int_desc = irq_data_get_irq_chip_data(irq_data);
+	if (!int_desc)
 		return;
 
-	int_desc = irq_data_get_irq_chip_data(irq_data);
-	if (int_desc) {
-		irq_data->chip_data = NULL;
-		hv_int_desc_free(hpdev, int_desc);
+	irq_data->chip_data = NULL;
+	hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn));
+	if (!hpdev) {
+		kfree(int_desc);
+		return;
 	}
 
+	hv_int_desc_free(hpdev, int_desc);
 	put_pcichild(hpdev, hv_pcidev_ref_by_slot);
 }
 
@@ -1657,14 +1659,16 @@ static void hv_pci_onchannelcallback(void *context)
 			continue;
 		}
 
+		/* Zero length indicates there are no more packets. */
+		if (ret || !bytes_recvd)
+			break;
+
 		/*
 		 * All incoming packets must be at least as large as a
 		 * response.
 		 */
-		if (bytes_recvd <= sizeof(struct pci_response)) {
-			kfree(buffer);
-			return;
-		}
+		if (bytes_recvd <= sizeof(struct pci_response))
+			continue;
 		desc = (struct vmpacket_descriptor *)buffer;
 
 		switch (desc->type) {
@@ -1679,8 +1683,7 @@ static void hv_pci_onchannelcallback(void *context)
 			comp_packet->completion_func(comp_packet->compl_ctxt,
 						     response,
 						     bytes_recvd);
-			kfree(buffer);
-			return;
+			break;
 
 		case VM_PKT_DATA_INBAND:
 
@@ -1727,8 +1730,9 @@ static void hv_pci_onchannelcallback(void *context)
 				desc->type, req_id, bytes_recvd);
 			break;
 		}
-		break;
 	}
+
+	kfree(buffer);
 }
 
 /**
diff --git a/drivers/pci/host/pci-keystone.c b/drivers/pci/host/pci-keystone.c
index 6b8301ef21ca..8ba28834d470 100644
--- a/drivers/pci/host/pci-keystone.c
+++ b/drivers/pci/host/pci-keystone.c
@@ -17,7 +17,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/msi.h>
 #include <linux/of_irq.h>
 #include <linux/of.h>
@@ -360,7 +360,6 @@ static const struct of_device_id ks_pcie_of_match[] = {
 	},
 	{ },
 };
-MODULE_DEVICE_TABLE(of, ks_pcie_of_match);
 
 static int __exit ks_pcie_remove(struct platform_device *pdev)
 {
@@ -439,9 +438,4 @@ static struct platform_driver ks_pcie_driver __refdata = {
 		.of_match_table = of_match_ptr(ks_pcie_of_match),
 	},
 };
-
-module_platform_driver(ks_pcie_driver);
-
-MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>");
-MODULE_DESCRIPTION("Keystone PCIe host controller driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(ks_pcie_driver);
diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c
index a21e229d95e0..114ba819277a 100644
--- a/drivers/pci/host/pci-layerscape.c
+++ b/drivers/pci/host/pci-layerscape.c
@@ -12,7 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of_pci.h>
 #include <linux/of_platform.h>
 #include <linux/of_irq.h>
@@ -211,7 +211,6 @@ static const struct of_device_id ls_pcie_of_match[] = {
 	{ .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
 	{ },
 };
-MODULE_DEVICE_TABLE(of, ls_pcie_of_match);
 
 static int __init ls_add_pcie_port(struct pcie_port *pp,
 				   struct platform_device *pdev)
@@ -275,9 +274,4 @@ static struct platform_driver ls_pcie_driver = {
 		.of_match_table = ls_pcie_of_match,
 	},
 };
-
-module_platform_driver_probe(ls_pcie_driver, ls_pcie_probe);
-
-MODULE_AUTHOR("Minghuan Lian <Minghuan.Lian@freescale.com>");
-MODULE_DESCRIPTION("Freescale Layerscape PCIe host controller driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver_probe(ls_pcie_driver, ls_pcie_probe);
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 6b451df6502c..307f81d6b479 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -1,6 +1,8 @@
 /*
  * PCIe driver for Marvell Armada 370 and Armada XP SoCs
  *
+ * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
@@ -11,7 +13,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/msi.h>
 #include <linux/slab.h>
@@ -839,25 +841,22 @@ static struct pci_ops mvebu_pcie_ops = {
 static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct mvebu_pcie *pcie = sys_to_pcie(sys);
-	int i;
+	int err, i;
 
 	pcie->mem.name = "PCI MEM";
 	pcie->realio.name = "PCI I/O";
 
-	if (request_resource(&iomem_resource, &pcie->mem))
-		return 0;
-
-	if (resource_size(&pcie->realio) != 0) {
-		if (request_resource(&ioport_resource, &pcie->realio)) {
-			release_resource(&pcie->mem);
-			return 0;
-		}
+	if (resource_size(&pcie->realio) != 0)
 		pci_add_resource_offset(&sys->resources, &pcie->realio,
 					sys->io_offset);
-	}
+
 	pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
 	pci_add_resource(&sys->resources, &pcie->busn);
 
+	err = devm_request_pci_bus_resources(&pcie->pdev->dev, &sys->resources);
+	if (err)
+		return 0;
+
 	for (i = 0; i < pcie->nports; i++) {
 		struct mvebu_pcie_port *port = &pcie->ports[i];
 
@@ -1298,7 +1297,6 @@ static const struct of_device_id mvebu_pcie_of_match_table[] = {
 	{ .compatible = "marvell,kirkwood-pcie", },
 	{},
 };
-MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table);
 
 static const struct dev_pm_ops mvebu_pcie_pm_ops = {
 	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume)
@@ -1314,8 +1312,4 @@ static struct platform_driver mvebu_pcie_driver = {
 	},
 	.probe = mvebu_pcie_probe,
 };
-module_platform_driver(mvebu_pcie_driver);
-
-MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
-MODULE_DESCRIPTION("Marvell EBU PCIe driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(mvebu_pcie_driver);
diff --git a/drivers/pci/host/pci-rcar-gen2.c b/drivers/pci/host/pci-rcar-gen2.c
index 9980a4bdae7e..597566f96f5e 100644
--- a/drivers/pci/host/pci-rcar-gen2.c
+++ b/drivers/pci/host/pci-rcar-gen2.c
@@ -4,6 +4,8 @@
  * Copyright (C) 2013 Renesas Solutions Corp.
  * Copyright (C) 2013 Cogent Embedded, Inc.
  *
+ * Author: Valentine Barshak <valentine.barshak@cogentembedded.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -14,7 +16,6 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
 #include <linux/pci.h>
@@ -97,7 +98,6 @@
 struct rcar_pci_priv {
 	struct device *dev;
 	void __iomem *reg;
-	struct resource io_res;
 	struct resource mem_res;
 	struct resource *cfg_res;
 	unsigned busnr;
@@ -194,6 +194,7 @@ static int rcar_pci_setup(int nr, struct pci_sys_data *sys)
 	struct rcar_pci_priv *priv = sys->private_data;
 	void __iomem *reg = priv->reg;
 	u32 val;
+	int ret;
 
 	pm_runtime_enable(priv->dev);
 	pm_runtime_get_sync(priv->dev);
@@ -273,8 +274,10 @@ static int rcar_pci_setup(int nr, struct pci_sys_data *sys)
 		rcar_pci_setup_errirq(priv);
 
 	/* Add PCI resources */
-	pci_add_resource(&sys->resources, &priv->io_res);
 	pci_add_resource(&sys->resources, &priv->mem_res);
+	ret = devm_request_pci_bus_resources(priv->dev, &sys->resources);
+	if (ret < 0)
+		return ret;
 
 	/* Setup bus number based on platform device id / of bus-range */
 	sys->busnr = priv->busnr;
@@ -371,14 +374,6 @@ static int rcar_pci_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	priv->mem_res = *mem_res;
-	/*
-	 * The controller does not support/use port I/O,
-	 * so setup a dummy port I/O region here.
-	 */
-	priv->io_res.start = priv->mem_res.start;
-	priv->io_res.end = priv->mem_res.end;
-	priv->io_res.flags = IORESOURCE_IO;
-
 	priv->cfg_res = cfg_res;
 
 	priv->irq = platform_get_irq(pdev, 0);
@@ -421,6 +416,7 @@ static int rcar_pci_probe(struct platform_device *pdev)
 	hw_private[0] = priv;
 	memset(&hw, 0, sizeof(hw));
 	hw.nr_controllers = ARRAY_SIZE(hw_private);
+	hw.io_optional = 1;
 	hw.private_data = hw_private;
 	hw.map_irq = rcar_pci_map_irq;
 	hw.ops = &rcar_pci_ops;
@@ -437,8 +433,6 @@ static struct of_device_id rcar_pci_of_match[] = {
 	{ },
 };
 
-MODULE_DEVICE_TABLE(of, rcar_pci_of_match);
-
 static struct platform_driver rcar_pci_driver = {
 	.driver = {
 		.name = "pci-rcar-gen2",
@@ -447,9 +441,4 @@ static struct platform_driver rcar_pci_driver = {
 	},
 	.probe = rcar_pci_probe,
 };
-
-module_platform_driver(rcar_pci_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Renesas R-Car Gen2 internal PCI");
-MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>");
+builtin_platform_driver(rcar_pci_driver);
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index c388468c202a..6de0757b11e4 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -9,6 +9,8 @@
  *
  * Bits taken from arch/arm/mach-dove/pcie.c
  *
+ * Author: Thierry Reding <treding@nvidia.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -32,7 +34,7 @@
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/msi.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
@@ -183,26 +185,26 @@
 
 #define AFI_PEXBIAS_CTRL_0		0x168
 
-#define RP_VEND_XP	0x00000F00
+#define RP_VEND_XP	0x00000f00
 #define  RP_VEND_XP_DL_UP	(1 << 30)
 
-#define RP_PRIV_MISC	0x00000FE0
-#define  RP_PRIV_MISC_PRSNT_MAP_EP_PRSNT (0xE << 0)
-#define  RP_PRIV_MISC_PRSNT_MAP_EP_ABSNT (0xF << 0)
+#define RP_PRIV_MISC	0x00000fe0
+#define  RP_PRIV_MISC_PRSNT_MAP_EP_PRSNT (0xe << 0)
+#define  RP_PRIV_MISC_PRSNT_MAP_EP_ABSNT (0xf << 0)
 
 #define RP_LINK_CONTROL_STATUS			0x00000090
 #define  RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE	0x20000000
 #define  RP_LINK_CONTROL_STATUS_LINKSTAT_MASK	0x3fff0000
 
-#define PADS_CTL_SEL		0x0000009C
+#define PADS_CTL_SEL		0x0000009c
 
-#define PADS_CTL		0x000000A0
+#define PADS_CTL		0x000000a0
 #define  PADS_CTL_IDDQ_1L	(1 << 0)
 #define  PADS_CTL_TX_DATA_EN_1L	(1 << 6)
 #define  PADS_CTL_RX_DATA_EN_1L	(1 << 10)
 
-#define PADS_PLL_CTL_TEGRA20			0x000000B8
-#define PADS_PLL_CTL_TEGRA30			0x000000B4
+#define PADS_PLL_CTL_TEGRA20			0x000000b8
+#define PADS_PLL_CTL_TEGRA30			0x000000b4
 #define  PADS_PLL_CTL_RST_B4SM			(1 << 1)
 #define  PADS_PLL_CTL_LOCKDET			(1 << 8)
 #define  PADS_PLL_CTL_REFCLK_MASK		(0x3 << 16)
@@ -214,9 +216,9 @@
 #define  PADS_PLL_CTL_TXCLKREF_DIV5		(1 << 20)
 #define  PADS_PLL_CTL_TXCLKREF_BUF_EN		(1 << 22)
 
-#define PADS_REFCLK_CFG0			0x000000C8
-#define PADS_REFCLK_CFG1			0x000000CC
-#define PADS_REFCLK_BIAS			0x000000D0
+#define PADS_REFCLK_CFG0			0x000000c8
+#define PADS_REFCLK_CFG1			0x000000cc
+#define PADS_REFCLK_BIAS			0x000000d0
 
 /*
  * Fields in PADS_REFCLK_CFG*. Those registers form an array of 16-bit
@@ -228,15 +230,6 @@
 #define PADS_REFCLK_CFG_PREDI_SHIFT		8  /* 11:8 */
 #define PADS_REFCLK_CFG_DRVI_SHIFT		12 /* 15:12 */
 
-/* Default value provided by HW engineering is 0xfa5c */
-#define PADS_REFCLK_CFG_VALUE \
-	( \
-		(0x17 << PADS_REFCLK_CFG_TERM_SHIFT)   | \
-		(0    << PADS_REFCLK_CFG_E_TERM_SHIFT) | \
-		(0xa  << PADS_REFCLK_CFG_PREDI_SHIFT)  | \
-		(0xf  << PADS_REFCLK_CFG_DRVI_SHIFT)     \
-	)
-
 struct tegra_msi {
 	struct msi_controller chip;
 	DECLARE_BITMAP(used, INT_PCI_MSI_NR);
@@ -252,6 +245,8 @@ struct tegra_pcie_soc_data {
 	unsigned int msi_base_shift;
 	u32 pads_pll_ctl;
 	u32 tx_ref_sel;
+	u32 pads_refclk_cfg0;
+	u32 pads_refclk_cfg1;
 	bool has_pex_clkreq_en;
 	bool has_pex_bias_ctrl;
 	bool has_intr_prsnt_sense;
@@ -274,7 +269,6 @@ struct tegra_pcie {
 	struct list_head buses;
 	struct resource *cs;
 
-	struct resource all;
 	struct resource io;
 	struct resource pio;
 	struct resource mem;
@@ -623,30 +617,21 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 	sys->mem_offset = pcie->offset.mem;
 	sys->io_offset = pcie->offset.io;
 
-	err = devm_request_resource(pcie->dev, &pcie->all, &pcie->io);
-	if (err < 0)
-		return err;
-
-	err = devm_request_resource(pcie->dev, &ioport_resource, &pcie->pio);
-	if (err < 0)
-		return err;
-
-	err = devm_request_resource(pcie->dev, &pcie->all, &pcie->mem);
+	err = devm_request_resource(pcie->dev, &iomem_resource, &pcie->io);
 	if (err < 0)
 		return err;
 
-	err = devm_request_resource(pcie->dev, &pcie->all, &pcie->prefetch);
-	if (err)
-		return err;
-
 	pci_add_resource_offset(&sys->resources, &pcie->pio, sys->io_offset);
 	pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &pcie->prefetch,
 				sys->mem_offset);
 	pci_add_resource(&sys->resources, &pcie->busn);
 
-	pci_ioremap_io(pcie->pio.start, pcie->io.start);
+	err = devm_request_pci_bus_resources(pcie->dev, &sys->resources);
+	if (err < 0)
+		return err;
 
+	pci_remap_iospace(&pcie->pio, pcie->io.start);
 	return 1;
 }
 
@@ -838,12 +823,6 @@ static int tegra_pcie_phy_enable(struct tegra_pcie *pcie)
 	value |= PADS_PLL_CTL_RST_B4SM;
 	pads_writel(pcie, value, soc->pads_pll_ctl);
 
-	/* Configure the reference clock driver */
-	value = PADS_REFCLK_CFG_VALUE | (PADS_REFCLK_CFG_VALUE << 16);
-	pads_writel(pcie, value, PADS_REFCLK_CFG0);
-	if (soc->num_ports > 2)
-		pads_writel(pcie, PADS_REFCLK_CFG_VALUE, PADS_REFCLK_CFG1);
-
 	/* wait for the PLL to lock */
 	err = tegra_pcie_pll_wait(pcie, 500);
 	if (err < 0) {
@@ -927,6 +906,7 @@ static int tegra_pcie_port_phy_power_off(struct tegra_pcie_port *port)
 
 static int tegra_pcie_phy_power_on(struct tegra_pcie *pcie)
 {
+	const struct tegra_pcie_soc_data *soc = pcie->soc_data;
 	struct tegra_pcie_port *port;
 	int err;
 
@@ -952,6 +932,12 @@ static int tegra_pcie_phy_power_on(struct tegra_pcie *pcie)
 		}
 	}
 
+	/* Configure the reference clock driver */
+	pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0);
+
+	if (soc->num_ports > 2)
+		pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1);
+
 	return 0;
 }
 
@@ -1822,12 +1808,6 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 	struct resource res;
 	int err;
 
-	memset(&pcie->all, 0, sizeof(pcie->all));
-	pcie->all.flags = IORESOURCE_MEM;
-	pcie->all.name = np->full_name;
-	pcie->all.start = ~0;
-	pcie->all.end = 0;
-
 	if (of_pci_range_parser_init(&parser, np)) {
 		dev_err(pcie->dev, "missing \"ranges\" property\n");
 		return -EINVAL;
@@ -1880,18 +1860,8 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 			}
 			break;
 		}
-
-		if (res.start <= pcie->all.start)
-			pcie->all.start = res.start;
-
-		if (res.end >= pcie->all.end)
-			pcie->all.end = res.end;
 	}
 
-	err = devm_request_resource(pcie->dev, &iomem_resource, &pcie->all);
-	if (err < 0)
-		return err;
-
 	err = of_pci_parse_bus_range(np, &pcie->busn);
 	if (err < 0) {
 		dev_err(pcie->dev, "failed to parse ranges property: %d\n",
@@ -2078,6 +2048,7 @@ static const struct tegra_pcie_soc_data tegra20_pcie_data = {
 	.msi_base_shift = 0,
 	.pads_pll_ctl = PADS_PLL_CTL_TEGRA20,
 	.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10,
+	.pads_refclk_cfg0 = 0xfa5cfa5c,
 	.has_pex_clkreq_en = false,
 	.has_pex_bias_ctrl = false,
 	.has_intr_prsnt_sense = false,
@@ -2090,6 +2061,8 @@ static const struct tegra_pcie_soc_data tegra30_pcie_data = {
 	.msi_base_shift = 8,
 	.pads_pll_ctl = PADS_PLL_CTL_TEGRA30,
 	.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN,
+	.pads_refclk_cfg0 = 0xfa5cfa5c,
+	.pads_refclk_cfg1 = 0xfa5cfa5c,
 	.has_pex_clkreq_en = true,
 	.has_pex_bias_ctrl = true,
 	.has_intr_prsnt_sense = true,
@@ -2102,6 +2075,7 @@ static const struct tegra_pcie_soc_data tegra124_pcie_data = {
 	.msi_base_shift = 8,
 	.pads_pll_ctl = PADS_PLL_CTL_TEGRA30,
 	.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN,
+	.pads_refclk_cfg0 = 0x44ac44ac,
 	.has_pex_clkreq_en = true,
 	.has_pex_bias_ctrl = true,
 	.has_intr_prsnt_sense = true,
@@ -2115,7 +2089,6 @@ static const struct of_device_id tegra_pcie_of_match[] = {
 	{ .compatible = "nvidia,tegra20-pcie", .data = &tegra20_pcie_data },
 	{ },
 };
-MODULE_DEVICE_TABLE(of, tegra_pcie_of_match);
 
 static void *tegra_pcie_ports_seq_start(struct seq_file *s, loff_t *pos)
 {
@@ -2249,8 +2222,6 @@ static int tegra_pcie_probe(struct platform_device *pdev)
 	if (err < 0)
 		return err;
 
-	pcibios_min_mem = 0;
-
 	err = tegra_pcie_get_resources(pcie);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to request resources: %d\n", err);
@@ -2306,8 +2277,4 @@ static struct platform_driver tegra_pcie_driver = {
 	},
 	.probe = tegra_pcie_probe,
 };
-module_platform_driver(tegra_pcie_driver);
-
-MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
-MODULE_DESCRIPTION("NVIDIA Tegra PCIe driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(tegra_pcie_driver);
diff --git a/drivers/pci/host/pci-thunder-ecam.c b/drivers/pci/host/pci-thunder-ecam.c
index 540d030613eb..d50a3dc2d8db 100644
--- a/drivers/pci/host/pci-thunder-ecam.c
+++ b/drivers/pci/host/pci-thunder-ecam.c
@@ -7,14 +7,13 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/of_pci.h>
 #include <linux/of.h>
+#include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 
-#include "../ecam.h"
-
 static void set_val(u32 v, int where, int size, u32 *val)
 {
 	int shift = (where & 3) * 8;
@@ -360,7 +359,6 @@ static const struct of_device_id thunder_ecam_of_match[] = {
 	{ .compatible = "cavium,pci-host-thunder-ecam" },
 	{ },
 };
-MODULE_DEVICE_TABLE(of, thunder_ecam_of_match);
 
 static int thunder_ecam_probe(struct platform_device *pdev)
 {
@@ -374,7 +372,4 @@ static struct platform_driver thunder_ecam_driver = {
 	},
 	.probe = thunder_ecam_probe,
 };
-module_platform_driver(thunder_ecam_driver);
-
-MODULE_DESCRIPTION("Thunder ECAM PCI host driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(thunder_ecam_driver);
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index 9b8ab94f3c8c..6abaf80ffb39 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -15,13 +15,12 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 
-#include "../ecam.h"
-
 #define PEM_CFG_WR 0x28
 #define PEM_CFG_RD 0x30
 
@@ -285,8 +284,9 @@ static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn,
 	return pci_generic_config_write(bus, devfn, where, size, val);
 }
 
-static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg)
+static int thunder_pem_init(struct pci_config_window *cfg)
 {
+	struct device *dev = cfg->parent;
 	resource_size_t bar4_start;
 	struct resource *res_pem;
 	struct thunder_pem_pci *pem_pci;
@@ -346,7 +346,6 @@ static const struct of_device_id thunder_pem_of_match[] = {
 	{ .compatible = "cavium,pci-host-thunder-pem" },
 	{ },
 };
-MODULE_DEVICE_TABLE(of, thunder_pem_of_match);
 
 static int thunder_pem_probe(struct platform_device *pdev)
 {
@@ -360,7 +359,4 @@ static struct platform_driver thunder_pem_driver = {
 	},
 	.probe = thunder_pem_probe,
 };
-module_platform_driver(thunder_pem_driver);
-
-MODULE_DESCRIPTION("Thunder PEM PCIe host driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(thunder_pem_driver);
diff --git a/drivers/pci/host/pci-versatile.c b/drivers/pci/host/pci-versatile.c
index f843a72dc51c..f234405770ab 100644
--- a/drivers/pci/host/pci-versatile.c
+++ b/drivers/pci/host/pci-versatile.c
@@ -80,21 +80,21 @@ static int versatile_pci_parse_request_of_pci_ranges(struct device *dev,
 	if (err)
 		return err;
 
+	err = devm_request_pci_bus_resources(dev, res);
+	if (err)
+		goto out_release_res;
+
 	resource_list_for_each_entry(win, res) {
-		struct resource *parent, *res = win->res;
+		struct resource *res = win->res;
 
 		switch (resource_type(res)) {
 		case IORESOURCE_IO:
-			parent = &ioport_resource;
 			err = pci_remap_iospace(res, iobase);
-			if (err) {
+			if (err)
 				dev_warn(dev, "error %d: failed to map resource %pR\n",
 					 err, res);
-				continue;
-			}
 			break;
 		case IORESOURCE_MEM:
-			parent = &iomem_resource;
 			res_valid |= !(res->flags & IORESOURCE_PREFETCH);
 
 			writel(res->start >> 28, PCI_IMAP(mem));
@@ -102,23 +102,14 @@ static int versatile_pci_parse_request_of_pci_ranges(struct device *dev,
 			mem++;
 
 			break;
-		case IORESOURCE_BUS:
-		default:
-			continue;
 		}
-
-		err = devm_request_resource(dev, parent, res);
-		if (err)
-			goto out_release_res;
 	}
 
-	if (!res_valid) {
-		dev_err(dev, "non-prefetchable memory resource required\n");
-		err = -EINVAL;
-		goto out_release_res;
-	}
+	if (res_valid)
+		return 0;
 
-	return 0;
+	dev_err(dev, "non-prefetchable memory resource required\n");
+	err = -EINVAL;
 
 out_release_res:
 	pci_free_resource_list(res);
diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
index ae00ce22d5a6..a81273c23341 100644
--- a/drivers/pci/host/pci-xgene.c
+++ b/drivers/pci/host/pci-xgene.c
@@ -21,7 +21,7 @@
 #include <linux/io.h>
 #include <linux/jiffies.h>
 #include <linux/memblock.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -540,14 +540,20 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = devm_request_pci_bus_resources(&pdev->dev, &res);
+	if (ret)
+		goto error;
+
 	ret = xgene_pcie_setup(port, &res, iobase);
 	if (ret)
-		return ret;
+		goto error;
 
 	bus = pci_create_root_bus(&pdev->dev, 0,
 					&xgene_pcie_ops, port, &res);
-	if (!bus)
-		return -ENOMEM;
+	if (!bus) {
+		ret = -ENOMEM;
+		goto error;
+	}
 
 	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
@@ -555,6 +561,10 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, port);
 	return 0;
+
+error:
+	pci_free_resource_list(&res);
+	return ret;
 }
 
 static const struct of_device_id xgene_pcie_match_table[] = {
@@ -569,8 +579,4 @@ static struct platform_driver xgene_pcie_driver = {
 	},
 	.probe = xgene_pcie_probe_bridge,
 };
-module_platform_driver(xgene_pcie_driver);
-
-MODULE_AUTHOR("Tanmay Inamdar <tinamdar@apm.com>");
-MODULE_DESCRIPTION("APM X-Gene PCIe driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(xgene_pcie_driver);
diff --git a/drivers/pci/host/pcie-altera.c b/drivers/pci/host/pcie-altera.c
index dbac6fb3f0bd..2b7837650db8 100644
--- a/drivers/pci/host/pcie-altera.c
+++ b/drivers/pci/host/pcie-altera.c
@@ -61,6 +61,8 @@
 #define TLP_LOOP			500
 #define RP_DEVFN			0
 
+#define LINK_UP_TIMEOUT			5000
+
 #define INTX_NUM			4
 
 #define DWORD_MASK			3
@@ -81,9 +83,30 @@ struct tlp_rp_regpair_t {
 	u32 reg1;
 };
 
+static inline void cra_writel(struct altera_pcie *pcie, const u32 value,
+			      const u32 reg)
+{
+	writel_relaxed(value, pcie->cra_base + reg);
+}
+
+static inline u32 cra_readl(struct altera_pcie *pcie, const u32 reg)
+{
+	return readl_relaxed(pcie->cra_base + reg);
+}
+
+static bool altera_pcie_link_is_up(struct altera_pcie *pcie)
+{
+	return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
+}
+
 static void altera_pcie_retrain(struct pci_dev *dev)
 {
 	u16 linkcap, linkstat;
+	struct altera_pcie *pcie = dev->bus->sysdata;
+	int timeout =  0;
+
+	if (!altera_pcie_link_is_up(pcie))
+		return;
 
 	/*
 	 * Set the retrain bit if the PCIe rootport support > 2.5GB/s, but
@@ -95,9 +118,16 @@ static void altera_pcie_retrain(struct pci_dev *dev)
 		return;
 
 	pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &linkstat);
-	if ((linkstat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB)
+	if ((linkstat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB) {
 		pcie_capability_set_word(dev, PCI_EXP_LNKCTL,
 					 PCI_EXP_LNKCTL_RL);
+		while (!altera_pcie_link_is_up(pcie)) {
+			timeout++;
+			if (timeout > LINK_UP_TIMEOUT)
+				break;
+			udelay(5);
+		}
+	}
 }
 DECLARE_PCI_FIXUP_EARLY(0x1172, PCI_ANY_ID, altera_pcie_retrain);
 
@@ -120,17 +150,6 @@ static bool altera_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int  devfn,
 	return false;
 }
 
-static inline void cra_writel(struct altera_pcie *pcie, const u32 value,
-			      const u32 reg)
-{
-	writel_relaxed(value, pcie->cra_base + reg);
-}
-
-static inline u32 cra_readl(struct altera_pcie *pcie, const u32 reg)
-{
-	return readl_relaxed(pcie->cra_base + reg);
-}
-
 static void tlp_write_tx(struct altera_pcie *pcie,
 			 struct tlp_rp_regpair_t *tlp_rp_regdata)
 {
@@ -139,11 +158,6 @@ static void tlp_write_tx(struct altera_pcie *pcie,
 	cra_writel(pcie, tlp_rp_regdata->ctrl, RP_TX_CNTRL);
 }
 
-static bool altera_pcie_link_is_up(struct altera_pcie *pcie)
-{
-	return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
-}
-
 static bool altera_pcie_valid_config(struct altera_pcie *pcie,
 				     struct pci_bus *bus, int dev)
 {
@@ -415,11 +429,6 @@ static void altera_pcie_isr(struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static void altera_pcie_release_of_pci_ranges(struct altera_pcie *pcie)
-{
-	pci_free_resource_list(&pcie->resources);
-}
-
 static int altera_pcie_parse_request_of_pci_ranges(struct altera_pcie *pcie)
 {
 	int err, res_valid = 0;
@@ -432,33 +441,25 @@ static int altera_pcie_parse_request_of_pci_ranges(struct altera_pcie *pcie)
 	if (err)
 		return err;
 
+	err = devm_request_pci_bus_resources(dev, &pcie->resources);
+	if (err)
+		goto out_release_res;
+
 	resource_list_for_each_entry(win, &pcie->resources) {
-		struct resource *parent, *res = win->res;
+		struct resource *res = win->res;
 
-		switch (resource_type(res)) {
-		case IORESOURCE_MEM:
-			parent = &iomem_resource;
+		if (resource_type(res) == IORESOURCE_MEM)
 			res_valid |= !(res->flags & IORESOURCE_PREFETCH);
-			break;
-		default:
-			continue;
-		}
-
-		err = devm_request_resource(dev, parent, res);
-		if (err)
-			goto out_release_res;
 	}
 
-	if (!res_valid) {
-		dev_err(dev, "non-prefetchable memory resource required\n");
-		err = -EINVAL;
-		goto out_release_res;
-	}
+	if (res_valid)
+		return 0;
 
-	return 0;
+	dev_err(dev, "non-prefetchable memory resource required\n");
+	err = -EINVAL;
 
 out_release_res:
-	altera_pcie_release_of_pci_ranges(pcie);
+	pci_free_resource_list(&pcie->resources);
 	return err;
 }
 
diff --git a/drivers/pci/host/pcie-armada8k.c b/drivers/pci/host/pcie-armada8k.c
index 55723567b5d4..0f4f570068e3 100644
--- a/drivers/pci/host/pcie-armada8k.c
+++ b/drivers/pci/host/pcie-armada8k.c
@@ -5,6 +5,9 @@
  *
  * Copyright (C) 2016 Marvell Technology Group Ltd.
  *
+ * Author: Yehuda Yitshak <yehuday@marvell.com>
+ * Author: Shadi Ammouri <shadi@marvell.com>
+ *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
@@ -14,7 +17,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/pci.h>
 #include <linux/phy/phy.h>
@@ -244,7 +247,6 @@ static const struct of_device_id armada8k_pcie_of_match[] = {
 	{ .compatible = "marvell,armada8k-pcie", },
 	{},
 };
-MODULE_DEVICE_TABLE(of, armada8k_pcie_of_match);
 
 static struct platform_driver armada8k_pcie_driver = {
 	.probe		= armada8k_pcie_probe,
@@ -253,10 +255,4 @@ static struct platform_driver armada8k_pcie_driver = {
 		.of_match_table = of_match_ptr(armada8k_pcie_of_match),
 	},
 };
-
-module_platform_driver(armada8k_pcie_driver);
-
-MODULE_DESCRIPTION("Armada 8k PCIe host controller driver");
-MODULE_AUTHOR("Yehuda Yitshak <yehuday@marvell.com>");
-MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(armada8k_pcie_driver);
diff --git a/drivers/pci/host/pcie-artpec6.c b/drivers/pci/host/pcie-artpec6.c
new file mode 100644
index 000000000000..16ba70b7ec65
--- /dev/null
+++ b/drivers/pci/host/pcie-artpec6.c
@@ -0,0 +1,280 @@
+/*
+ * PCIe host controller driver for Axis ARTPEC-6 SoC
+ *
+ * Author: Niklas Cassel <niklas.cassel@axis.com>
+ *
+ * Based on work done by Phil Edworthy <phil@edworthys.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include "pcie-designware.h"
+
+#define to_artpec6_pcie(x)	container_of(x, struct artpec6_pcie, pp)
+
+struct artpec6_pcie {
+	struct pcie_port	pp;
+	struct regmap		*regmap;
+	void __iomem		*phy_base;
+};
+
+/* PCIe Port Logic registers (memory-mapped) */
+#define PL_OFFSET			0x700
+#define PCIE_PHY_DEBUG_R0		(PL_OFFSET + 0x28)
+#define PCIE_PHY_DEBUG_R1		(PL_OFFSET + 0x2c)
+
+#define MISC_CONTROL_1_OFF		(PL_OFFSET + 0x1bc)
+#define  DBI_RO_WR_EN			1
+
+/* ARTPEC-6 specific registers */
+#define PCIECFG				0x18
+#define  PCIECFG_DBG_OEN		(1 << 24)
+#define  PCIECFG_CORE_RESET_REQ		(1 << 21)
+#define  PCIECFG_LTSSM_ENABLE		(1 << 20)
+#define  PCIECFG_CLKREQ_B		(1 << 11)
+#define  PCIECFG_REFCLK_ENABLE		(1 << 10)
+#define  PCIECFG_PLL_ENABLE		(1 << 9)
+#define  PCIECFG_PCLK_ENABLE		(1 << 8)
+#define  PCIECFG_RISRCREN		(1 << 4)
+#define  PCIECFG_MODE_TX_DRV_EN		(1 << 3)
+#define  PCIECFG_CISRREN		(1 << 2)
+#define  PCIECFG_MACRO_ENABLE		(1 << 0)
+
+#define NOCCFG				0x40
+#define NOCCFG_ENABLE_CLK_PCIE		(1 << 4)
+#define NOCCFG_POWER_PCIE_IDLEACK	(1 << 3)
+#define NOCCFG_POWER_PCIE_IDLE		(1 << 2)
+#define NOCCFG_POWER_PCIE_IDLEREQ	(1 << 1)
+
+#define PHY_STATUS			0x118
+#define PHY_COSPLLLOCK			(1 << 0)
+
+#define ARTPEC6_CPU_TO_BUS_ADDR		0x0fffffff
+
+static int artpec6_pcie_establish_link(struct pcie_port *pp)
+{
+	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pp);
+	u32 val;
+	unsigned int retries;
+
+	/* Hold DW core in reset */
+	regmap_read(artpec6_pcie->regmap, PCIECFG, &val);
+	val |= PCIECFG_CORE_RESET_REQ;
+	regmap_write(artpec6_pcie->regmap, PCIECFG, val);
+
+	regmap_read(artpec6_pcie->regmap, PCIECFG, &val);
+	val |=  PCIECFG_RISRCREN |	/* Receiver term. 50 Ohm */
+		PCIECFG_MODE_TX_DRV_EN |
+		PCIECFG_CISRREN |	/* Reference clock term. 100 Ohm */
+		PCIECFG_MACRO_ENABLE;
+	val |= PCIECFG_REFCLK_ENABLE;
+	val &= ~PCIECFG_DBG_OEN;
+	val &= ~PCIECFG_CLKREQ_B;
+	regmap_write(artpec6_pcie->regmap, PCIECFG, val);
+	usleep_range(5000, 6000);
+
+	regmap_read(artpec6_pcie->regmap, NOCCFG, &val);
+	val |= NOCCFG_ENABLE_CLK_PCIE;
+	regmap_write(artpec6_pcie->regmap, NOCCFG, val);
+	usleep_range(20, 30);
+
+	regmap_read(artpec6_pcie->regmap, PCIECFG, &val);
+	val |= PCIECFG_PCLK_ENABLE | PCIECFG_PLL_ENABLE;
+	regmap_write(artpec6_pcie->regmap, PCIECFG, val);
+	usleep_range(6000, 7000);
+
+	regmap_read(artpec6_pcie->regmap, NOCCFG, &val);
+	val &= ~NOCCFG_POWER_PCIE_IDLEREQ;
+	regmap_write(artpec6_pcie->regmap, NOCCFG, val);
+
+	retries = 50;
+	do {
+		usleep_range(1000, 2000);
+		regmap_read(artpec6_pcie->regmap, NOCCFG, &val);
+		retries--;
+	} while (retries &&
+		(val & (NOCCFG_POWER_PCIE_IDLEACK | NOCCFG_POWER_PCIE_IDLE)));
+
+	retries = 50;
+	do {
+		usleep_range(1000, 2000);
+		val = readl(artpec6_pcie->phy_base + PHY_STATUS);
+		retries--;
+	} while (retries && !(val & PHY_COSPLLLOCK));
+
+	/* Take DW core out of reset */
+	regmap_read(artpec6_pcie->regmap, PCIECFG, &val);
+	val &= ~PCIECFG_CORE_RESET_REQ;
+	regmap_write(artpec6_pcie->regmap, PCIECFG, val);
+	usleep_range(100, 200);
+
+	/*
+	 * Enable writing to config regs. This is required as the Synopsys
+	 * driver changes the class code. That register needs DBI write enable.
+	 */
+	writel(DBI_RO_WR_EN, pp->dbi_base + MISC_CONTROL_1_OFF);
+
+	pp->io_base &= ARTPEC6_CPU_TO_BUS_ADDR;
+	pp->mem_base &= ARTPEC6_CPU_TO_BUS_ADDR;
+	pp->cfg0_base &= ARTPEC6_CPU_TO_BUS_ADDR;
+	pp->cfg1_base &= ARTPEC6_CPU_TO_BUS_ADDR;
+
+	/* setup root complex */
+	dw_pcie_setup_rc(pp);
+
+	/* assert LTSSM enable */
+	regmap_read(artpec6_pcie->regmap, PCIECFG, &val);
+	val |= PCIECFG_LTSSM_ENABLE;
+	regmap_write(artpec6_pcie->regmap, PCIECFG, val);
+
+	/* check if the link is up or not */
+	if (!dw_pcie_wait_for_link(pp))
+		return 0;
+
+	dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
+		readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
+		readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
+
+	return -ETIMEDOUT;
+}
+
+static void artpec6_pcie_enable_interrupts(struct pcie_port *pp)
+{
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		dw_pcie_msi_init(pp);
+}
+
+static void artpec6_pcie_host_init(struct pcie_port *pp)
+{
+	artpec6_pcie_establish_link(pp);
+	artpec6_pcie_enable_interrupts(pp);
+}
+
+static int artpec6_pcie_link_up(struct pcie_port *pp)
+{
+	u32 rc;
+
+	/*
+	 * Get status from Synopsys IP
+	 * link is debug bit 36, debug register 1 starts at bit 32
+	 */
+	rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << (36 - 32));
+	if (rc)
+		return 1;
+
+	return 0;
+}
+
+static struct pcie_host_ops artpec6_pcie_host_ops = {
+	.link_up = artpec6_pcie_link_up,
+	.host_init = artpec6_pcie_host_init,
+};
+
+static irqreturn_t artpec6_pcie_msi_handler(int irq, void *arg)
+{
+	struct pcie_port *pp = arg;
+
+	return dw_handle_msi_irq(pp);
+}
+
+static int __init artpec6_add_pcie_port(struct pcie_port *pp,
+					struct platform_device *pdev)
+{
+	int ret;
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		pp->msi_irq = platform_get_irq_byname(pdev, "msi");
+		if (pp->msi_irq <= 0) {
+			dev_err(&pdev->dev, "failed to get MSI irq\n");
+			return -ENODEV;
+		}
+
+		ret = devm_request_irq(&pdev->dev, pp->msi_irq,
+				       artpec6_pcie_msi_handler,
+				       IRQF_SHARED | IRQF_NO_THREAD,
+				       "artpec6-pcie-msi", pp);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to request MSI irq\n");
+			return ret;
+		}
+	}
+
+	pp->root_bus_nr = -1;
+	pp->ops = &artpec6_pcie_host_ops;
+
+	ret = dw_pcie_host_init(pp);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize host\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int artpec6_pcie_probe(struct platform_device *pdev)
+{
+	struct artpec6_pcie *artpec6_pcie;
+	struct pcie_port *pp;
+	struct resource *dbi_base;
+	struct resource *phy_base;
+	int ret;
+
+	artpec6_pcie = devm_kzalloc(&pdev->dev, sizeof(*artpec6_pcie),
+				    GFP_KERNEL);
+	if (!artpec6_pcie)
+		return -ENOMEM;
+
+	pp = &artpec6_pcie->pp;
+	pp->dev = &pdev->dev;
+
+	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
+	pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);
+	if (IS_ERR(pp->dbi_base))
+		return PTR_ERR(pp->dbi_base);
+
+	phy_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
+	artpec6_pcie->phy_base = devm_ioremap_resource(&pdev->dev, phy_base);
+	if (IS_ERR(artpec6_pcie->phy_base))
+		return PTR_ERR(artpec6_pcie->phy_base);
+
+	artpec6_pcie->regmap =
+		syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+						"axis,syscon-pcie");
+	if (IS_ERR(artpec6_pcie->regmap))
+		return PTR_ERR(artpec6_pcie->regmap);
+
+	ret = artpec6_add_pcie_port(pp, pdev);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, artpec6_pcie);
+	return 0;
+}
+
+static const struct of_device_id artpec6_pcie_of_match[] = {
+	{ .compatible = "axis,artpec6-pcie", },
+	{},
+};
+
+static struct platform_driver artpec6_pcie_driver = {
+	.probe = artpec6_pcie_probe,
+	.driver = {
+		.name	= "artpec6-pcie",
+		.of_match_table = artpec6_pcie_of_match,
+	},
+};
+builtin_platform_driver(artpec6_pcie_driver);
diff --git a/drivers/pci/host/pcie-designware-plat.c b/drivers/pci/host/pcie-designware-plat.c
index b3500994d08a..c8079dc81c10 100644
--- a/drivers/pci/host/pcie-designware-plat.c
+++ b/drivers/pci/host/pcie-designware-plat.c
@@ -14,7 +14,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of_gpio.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
@@ -121,7 +121,6 @@ static const struct of_device_id dw_plat_pcie_of_match[] = {
 	{ .compatible = "snps,dw-pcie", },
 	{},
 };
-MODULE_DEVICE_TABLE(of, dw_plat_pcie_of_match);
 
 static struct platform_driver dw_plat_pcie_driver = {
 	.driver = {
@@ -130,9 +129,4 @@ static struct platform_driver dw_plat_pcie_driver = {
 	},
 	.probe = dw_plat_pcie_probe,
 };
-
-module_platform_driver(dw_plat_pcie_driver);
-
-MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
-MODULE_DESCRIPTION("Synopsys PCIe host controller glue platform driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(dw_plat_pcie_driver);
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index aafd766546f3..12afce19890b 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -452,6 +452,10 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	if (ret)
 		return ret;
 
+	ret = devm_request_pci_bus_resources(&pdev->dev, &res);
+	if (ret)
+		goto error;
+
 	/* Get the I/O and memory ranges from DT */
 	resource_list_for_each_entry(win, &res) {
 		switch (resource_type(win->res)) {
@@ -461,11 +465,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
 			pp->io_size = resource_size(pp->io);
 			pp->io_bus_addr = pp->io->start - win->offset;
 			ret = pci_remap_iospace(pp->io, pp->io_base);
-			if (ret) {
+			if (ret)
 				dev_warn(pp->dev, "error %d: failed to map resource %pR\n",
 					 ret, pp->io);
-				continue;
-			}
 			break;
 		case IORESOURCE_MEM:
 			pp->mem = win->res;
@@ -483,8 +485,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
 		case IORESOURCE_BUS:
 			pp->busn = win->res;
 			break;
-		default:
-			continue;
 		}
 	}
 
@@ -493,7 +493,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
 					resource_size(pp->cfg));
 		if (!pp->dbi_base) {
 			dev_err(pp->dev, "error with ioremap\n");
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto error;
 		}
 	}
 
@@ -504,7 +505,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
 						pp->cfg0_size);
 		if (!pp->va_cfg0_base) {
 			dev_err(pp->dev, "error with ioremap in function\n");
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto error;
 		}
 	}
 
@@ -513,7 +515,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
 						pp->cfg1_size);
 		if (!pp->va_cfg1_base) {
 			dev_err(pp->dev, "error with ioremap\n");
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto error;
 		}
 	}
 
@@ -528,7 +531,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
 						&dw_pcie_msi_chip);
 			if (!pp->irq_domain) {
 				dev_err(pp->dev, "irq domain init failed\n");
-				return -ENXIO;
+				ret = -ENXIO;
+				goto error;
 			}
 
 			for (i = 0; i < MAX_MSI_IRQS; i++)
@@ -536,7 +540,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 		} else {
 			ret = pp->ops->msi_host_init(pp, &dw_pcie_msi_chip);
 			if (ret < 0)
-				return ret;
+				goto error;
 		}
 	}
 
@@ -552,8 +556,10 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	} else
 		bus = pci_scan_root_bus(pp->dev, pp->root_bus_nr, &dw_pcie_ops,
 					pp, &res);
-	if (!bus)
-		return -ENOMEM;
+	if (!bus) {
+		ret = -ENOMEM;
+		goto error;
+	}
 
 	if (pp->ops->scan_bus)
 		pp->ops->scan_bus(pp);
@@ -571,6 +577,10 @@ int dw_pcie_host_init(struct pcie_port *pp)
 
 	pci_bus_add_devices(bus);
 	return 0;
+
+error:
+	pci_free_resource_list(&res);
+	return ret;
 }
 
 static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
diff --git a/drivers/pci/host/pcie-hisi.c b/drivers/pci/host/pcie-hisi.c
index 3e98d4edae2d..7ee9dfcc45fb 100644
--- a/drivers/pci/host/pcie-hisi.c
+++ b/drivers/pci/host/pcie-hisi.c
@@ -12,7 +12,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
@@ -235,9 +235,6 @@ static const struct of_device_id hisi_pcie_of_match[] = {
 	{},
 };
 
-
-MODULE_DEVICE_TABLE(of, hisi_pcie_of_match);
-
 static struct platform_driver hisi_pcie_driver = {
 	.probe  = hisi_pcie_probe,
 	.driver = {
@@ -245,10 +242,4 @@ static struct platform_driver hisi_pcie_driver = {
 		   .of_match_table = hisi_pcie_of_match,
 	},
 };
-
-module_platform_driver(hisi_pcie_driver);
-
-MODULE_AUTHOR("Zhou Wang <wangzhou1@hisilicon.com>");
-MODULE_AUTHOR("Dacai Zhu <zhudacai@hisilicon.com>");
-MODULE_AUTHOR("Gabriele Paoloni <gabriele.paoloni@huawei.com>");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(hisi_pcie_driver);
diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index a576aeeb22da..e167b2f0098d 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -462,6 +462,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 	if (!pcie || !pcie->dev || !pcie->base)
 		return -EINVAL;
 
+	ret = devm_request_pci_bus_resources(pcie->dev, res);
+	if (ret)
+		return ret;
+
 	ret = phy_init(pcie->phy);
 	if (ret) {
 		dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 35092188039b..65db7a221509 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -7,6 +7,8 @@
  *  arch/sh/drivers/pci/ops-sh7786.c
  *  Copyright (C) 2009 - 2011  Paul Mundt
  *
+ * Author: Phil Edworthy <phil.edworthy@renesas.com>
+ *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
@@ -18,7 +20,7 @@
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/msi.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -936,12 +938,6 @@ static const struct of_device_id rcar_pcie_of_match[] = {
 	{ .compatible = "renesas,pcie-r8a7795", .data = rcar_pcie_hw_init },
 	{},
 };
-MODULE_DEVICE_TABLE(of, rcar_pcie_of_match);
-
-static void rcar_pcie_release_of_pci_ranges(struct rcar_pcie *pci)
-{
-	pci_free_resource_list(&pci->resources);
-}
 
 static int rcar_pcie_parse_request_of_pci_ranges(struct rcar_pcie *pci)
 {
@@ -955,37 +951,25 @@ static int rcar_pcie_parse_request_of_pci_ranges(struct rcar_pcie *pci)
 	if (err)
 		return err;
 
+	err = devm_request_pci_bus_resources(dev, &pci->resources);
+	if (err)
+		goto out_release_res;
+
 	resource_list_for_each_entry(win, &pci->resources) {
-		struct resource *parent, *res = win->res;
+		struct resource *res = win->res;
 
-		switch (resource_type(res)) {
-		case IORESOURCE_IO:
-			parent = &ioport_resource;
+		if (resource_type(res) == IORESOURCE_IO) {
 			err = pci_remap_iospace(res, iobase);
-			if (err) {
+			if (err)
 				dev_warn(dev, "error %d: failed to map resource %pR\n",
 					 err, res);
-				continue;
-			}
-			break;
-		case IORESOURCE_MEM:
-			parent = &iomem_resource;
-			break;
-
-		case IORESOURCE_BUS:
-		default:
-			continue;
 		}
-
-		err = devm_request_resource(dev, parent, res);
-		if (err)
-			goto out_release_res;
 	}
 
 	return 0;
 
 out_release_res:
-	rcar_pcie_release_of_pci_ranges(pci);
+	pci_free_resource_list(&pci->resources);
 	return err;
 }
 
@@ -1073,8 +1057,4 @@ static struct platform_driver rcar_pcie_driver = {
 	},
 	.probe = rcar_pcie_probe,
 };
-module_platform_driver(rcar_pcie_driver);
-
-MODULE_AUTHOR("Phil Edworthy <phil.edworthy@renesas.com>");
-MODULE_DESCRIPTION("Renesas R-Car PCIe driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(rcar_pcie_driver);
diff --git a/drivers/pci/host/pcie-xilinx-nwl.c b/drivers/pci/host/pcie-xilinx-nwl.c
index 3479d30e2be8..0b597d9190b4 100644
--- a/drivers/pci/host/pcie-xilinx-nwl.c
+++ b/drivers/pci/host/pcie-xilinx-nwl.c
@@ -825,27 +825,33 @@ static int nwl_pcie_probe(struct platform_device *pdev)
 
 	err = of_pci_get_host_bridge_resources(node, 0, 0xff, &res, &iobase);
 	if (err) {
-		pr_err("Getting bridge resources failed\n");
+		dev_err(pcie->dev, "Getting bridge resources failed\n");
 		return err;
 	}
 
+	err = devm_request_pci_bus_resources(pcie->dev, &res);
+	if (err)
+		goto error;
+
 	err = nwl_pcie_init_irq_domain(pcie);
 	if (err) {
 		dev_err(pcie->dev, "Failed creating IRQ Domain\n");
-		return err;
+		goto error;
 	}
 
 	bus = pci_create_root_bus(&pdev->dev, pcie->root_busno,
 				  &nwl_pcie_ops, pcie, &res);
-	if (!bus)
-		return -ENOMEM;
+	if (!bus) {
+		err = -ENOMEM;
+		goto error;
+	}
 
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		err = nwl_pcie_enable_msi(pcie, bus);
 		if (err < 0) {
 			dev_err(&pdev->dev,
 				"failed to enable MSI support: %d\n", err);
-			return err;
+			goto error;
 		}
 	}
 	pci_scan_child_bus(bus);
@@ -855,6 +861,10 @@ static int nwl_pcie_probe(struct platform_device *pdev)
 	pci_bus_add_devices(bus);
 	platform_set_drvdata(pdev, pcie);
 	return 0;
+
+error:
+	pci_free_resource_list(&res);
+	return err;
 }
 
 static int nwl_pcie_remove(struct platform_device *pdev)
diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 65f0fe0c2eaf..a30e01639557 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -550,7 +550,7 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
 	pcie_intc_node = of_get_next_child(node, NULL);
 	if (!pcie_intc_node) {
 		dev_err(dev, "No PCIe Intc node found\n");
-		return PTR_ERR(pcie_intc_node);
+		return -ENODEV;
 	}
 
 	port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
@@ -558,7 +558,7 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
 						 port);
 	if (!port->irq_domain) {
 		dev_err(dev, "Failed to get a INTx IRQ domain\n");
-		return PTR_ERR(port->irq_domain);
+		return -ENODEV;
 	}
 
 	/* Setup MSI */
@@ -569,7 +569,7 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
 							 &xilinx_pcie_msi_chip);
 		if (!port->irq_domain) {
 			dev_err(dev, "Failed to get a MSI IRQ domain\n");
-			return PTR_ERR(port->irq_domain);
+			return -ENODEV;
 		}
 
 		xilinx_pcie_enable_msi(port);
@@ -660,7 +660,6 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 	struct xilinx_pcie_port *port;
 	struct device *dev = &pdev->dev;
 	struct pci_bus *bus;
-
 	int err;
 	resource_size_t iobase = 0;
 	LIST_HEAD(res);
@@ -694,10 +693,17 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 		dev_err(dev, "Getting bridge resources failed\n");
 		return err;
 	}
+
+	err = devm_request_pci_bus_resources(dev, &res);
+	if (err)
+		goto error;
+
 	bus = pci_create_root_bus(&pdev->dev, 0,
 				  &xilinx_pcie_ops, port, &res);
-	if (!bus)
-		return -ENOMEM;
+	if (!bus) {
+		err = -ENOMEM;
+		goto error;
+	}
 
 #ifdef CONFIG_PCI_MSI
 	xilinx_pcie_msi_chip.dev = port->dev;
@@ -712,6 +718,10 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, port);
 
 	return 0;
+
+error:
+	pci_free_resource_list(&res);
+	return err;
 }
 
 /**
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index fa49f9143b80..6a33ddcfa20b 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -675,6 +675,8 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge)
 	if (bridge->is_going_away)
 		return;
 
+	pm_runtime_get_sync(&bridge->pci_dev->dev);
+
 	list_for_each_entry(slot, &bridge->slots, node) {
 		struct pci_bus *bus = slot->bus;
 		struct pci_dev *dev, *tmp;
@@ -694,6 +696,8 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge)
 			disable_slot(slot);
 		}
 	}
+
+	pm_runtime_put(&bridge->pci_dev->dev);
 }
 
 /*
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 5c24e938042f..08e84d61874e 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -546,6 +546,10 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
 	u8 present;
 	bool link;
 
+	/* Interrupts cannot originate from a controller that's asleep */
+	if (pdev->current_state == PCI_D3cold)
+		return IRQ_NONE;
+
 	/*
 	 * In order to guarantee that all interrupt events are
 	 * serviced, we need to re-inspect Slot Status register after
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index a080f4496fe2..a02981efdad5 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -4,6 +4,7 @@
  *
  * Copyright (C) 2003-2004 Intel
  * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ * Copyright (C) 2016 Christoph Hellwig.
  */
 
 #include <linux/err.h>
@@ -207,6 +208,12 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 	desc->masked = __pci_msi_desc_mask_irq(desc, mask, flag);
 }
 
+static void __iomem *pci_msix_desc_addr(struct msi_desc *desc)
+{
+	return desc->mask_base +
+		desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
+}
+
 /*
  * This internal function does not flush PCI writes to the device.
  * All users must ensure that they read from the device before either
@@ -217,8 +224,6 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag)
 {
 	u32 mask_bits = desc->masked;
-	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
-						PCI_MSIX_ENTRY_VECTOR_CTRL;
 
 	if (pci_msi_ignore_mask)
 		return 0;
@@ -226,7 +231,7 @@ u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag)
 	mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT;
 	if (flag)
 		mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT;
-	writel(mask_bits, desc->mask_base + offset);
+	writel(mask_bits, pci_msix_desc_addr(desc) + PCI_MSIX_ENTRY_VECTOR_CTRL);
 
 	return mask_bits;
 }
@@ -284,8 +289,7 @@ void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 	BUG_ON(dev->current_state != PCI_D0);
 
 	if (entry->msi_attrib.is_msix) {
-		void __iomem *base = entry->mask_base +
-			entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
+		void __iomem *base = pci_msix_desc_addr(entry);
 
 		msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR);
 		msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR);
@@ -315,9 +319,7 @@ void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 	if (dev->current_state != PCI_D0) {
 		/* Don't touch the hardware now */
 	} else if (entry->msi_attrib.is_msix) {
-		void __iomem *base;
-		base = entry->mask_base +
-			entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
+		void __iomem *base = pci_msix_desc_addr(entry);
 
 		writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR);
 		writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR);
@@ -567,6 +569,7 @@ static struct msi_desc *msi_setup_entry(struct pci_dev *dev, int nvec)
 	entry->msi_attrib.multi_cap	= (control & PCI_MSI_FLAGS_QMASK) >> 1;
 	entry->msi_attrib.multiple	= ilog2(__roundup_pow_of_two(nvec));
 	entry->nvec_used		= nvec;
+	entry->affinity			= dev->irq_affinity;
 
 	if (control & PCI_MSI_FLAGS_64BIT)
 		entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
@@ -678,10 +681,18 @@ static void __iomem *msix_map_region(struct pci_dev *dev, unsigned nr_entries)
 static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
 			      struct msix_entry *entries, int nvec)
 {
+	const struct cpumask *mask = NULL;
 	struct msi_desc *entry;
-	int i;
+	int cpu = -1, i;
 
 	for (i = 0; i < nvec; i++) {
+		if (dev->irq_affinity) {
+			cpu = cpumask_next(cpu, dev->irq_affinity);
+			if (cpu >= nr_cpu_ids)
+				cpu = cpumask_first(dev->irq_affinity);
+			mask = cpumask_of(cpu);
+		}
+
 		entry = alloc_msi_entry(&dev->dev);
 		if (!entry) {
 			if (!i)
@@ -694,10 +705,14 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
 
 		entry->msi_attrib.is_msix	= 1;
 		entry->msi_attrib.is_64		= 1;
-		entry->msi_attrib.entry_nr	= entries[i].entry;
+		if (entries)
+			entry->msi_attrib.entry_nr = entries[i].entry;
+		else
+			entry->msi_attrib.entry_nr = i;
 		entry->msi_attrib.default_irq	= dev->irq;
 		entry->mask_base		= base;
 		entry->nvec_used		= 1;
+		entry->affinity			= mask;
 
 		list_add_tail(&entry->list, dev_to_msi_list(&dev->dev));
 	}
@@ -712,13 +727,11 @@ static void msix_program_entries(struct pci_dev *dev,
 	int i = 0;
 
 	for_each_pci_msi_entry(entry, dev) {
-		int offset = entries[i].entry * PCI_MSIX_ENTRY_SIZE +
-						PCI_MSIX_ENTRY_VECTOR_CTRL;
-
-		entries[i].vector = entry->irq;
-		entry->masked = readl(entry->mask_base + offset);
+		if (entries)
+			entries[i++].vector = entry->irq;
+		entry->masked = readl(pci_msix_desc_addr(entry) +
+				PCI_MSIX_ENTRY_VECTOR_CTRL);
 		msix_mask_irq(entry, 1);
-		i++;
 	}
 }
 
@@ -931,7 +944,7 @@ EXPORT_SYMBOL(pci_msix_vec_count);
 /**
  * pci_enable_msix - configure device's MSI-X capability structure
  * @dev: pointer to the pci_dev data structure of MSI-X device function
- * @entries: pointer to an array of MSI-X entries
+ * @entries: pointer to an array of MSI-X entries (optional)
  * @nvec: number of MSI-X irqs requested for allocation by device driver
  *
  * Setup the MSI-X capability structure of device function with the number
@@ -951,22 +964,21 @@ int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
 	if (!pci_msi_supported(dev, nvec))
 		return -EINVAL;
 
-	if (!entries)
-		return -EINVAL;
-
 	nr_entries = pci_msix_vec_count(dev);
 	if (nr_entries < 0)
 		return nr_entries;
 	if (nvec > nr_entries)
 		return nr_entries;
 
-	/* Check for any invalid entries */
-	for (i = 0; i < nvec; i++) {
-		if (entries[i].entry >= nr_entries)
-			return -EINVAL;		/* invalid entry */
-		for (j = i + 1; j < nvec; j++) {
-			if (entries[i].entry == entries[j].entry)
-				return -EINVAL;	/* duplicate entry */
+	if (entries) {
+		/* Check for any invalid entries */
+		for (i = 0; i < nvec; i++) {
+			if (entries[i].entry >= nr_entries)
+				return -EINVAL;		/* invalid entry */
+			for (j = i + 1; j < nvec; j++) {
+				if (entries[i].entry == entries[j].entry)
+					return -EINVAL;	/* duplicate entry */
+			}
 		}
 	}
 	WARN_ON(!!dev->msix_enabled);
@@ -1026,19 +1038,8 @@ int pci_msi_enabled(void)
 }
 EXPORT_SYMBOL(pci_msi_enabled);
 
-/**
- * pci_enable_msi_range - configure device's MSI capability structure
- * @dev: device to configure
- * @minvec: minimal number of interrupts to configure
- * @maxvec: maximum number of interrupts to configure
- *
- * This function tries to allocate a maximum possible number of interrupts in a
- * range between @minvec and @maxvec. It returns a negative errno if an error
- * occurs. If it succeeds, it returns the actual number of interrupts allocated
- * and updates the @dev's irq member to the lowest new interrupt number;
- * the other interrupt numbers allocated to this device are consecutive.
- **/
-int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
+static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
+		unsigned int flags)
 {
 	int nvec;
 	int rc;
@@ -1061,25 +1062,85 @@ int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
 	nvec = pci_msi_vec_count(dev);
 	if (nvec < 0)
 		return nvec;
-	else if (nvec < minvec)
+	if (nvec < minvec)
 		return -EINVAL;
-	else if (nvec > maxvec)
+
+	if (nvec > maxvec)
 		nvec = maxvec;
 
-	do {
+	for (;;) {
+		if (!(flags & PCI_IRQ_NOAFFINITY)) {
+			dev->irq_affinity = irq_create_affinity_mask(&nvec);
+			if (nvec < minvec)
+				return -ENOSPC;
+		}
+
 		rc = msi_capability_init(dev, nvec);
-		if (rc < 0) {
+		if (rc == 0)
+			return nvec;
+
+		kfree(dev->irq_affinity);
+		dev->irq_affinity = NULL;
+
+		if (rc < 0)
 			return rc;
-		} else if (rc > 0) {
-			if (rc < minvec)
+		if (rc < minvec)
+			return -ENOSPC;
+
+		nvec = rc;
+	}
+}
+
+/**
+ * pci_enable_msi_range - configure device's MSI capability structure
+ * @dev: device to configure
+ * @minvec: minimal number of interrupts to configure
+ * @maxvec: maximum number of interrupts to configure
+ *
+ * This function tries to allocate a maximum possible number of interrupts in a
+ * range between @minvec and @maxvec. It returns a negative errno if an error
+ * occurs. If it succeeds, it returns the actual number of interrupts allocated
+ * and updates the @dev's irq member to the lowest new interrupt number;
+ * the other interrupt numbers allocated to this device are consecutive.
+ **/
+int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
+{
+	return __pci_enable_msi_range(dev, minvec, maxvec, PCI_IRQ_NOAFFINITY);
+}
+EXPORT_SYMBOL(pci_enable_msi_range);
+
+static int __pci_enable_msix_range(struct pci_dev *dev,
+		struct msix_entry *entries, int minvec, int maxvec,
+		unsigned int flags)
+{
+	int nvec = maxvec;
+	int rc;
+
+	if (maxvec < minvec)
+		return -ERANGE;
+
+	for (;;) {
+		if (!(flags & PCI_IRQ_NOAFFINITY)) {
+			dev->irq_affinity = irq_create_affinity_mask(&nvec);
+			if (nvec < minvec)
 				return -ENOSPC;
-			nvec = rc;
 		}
-	} while (rc);
 
-	return nvec;
+		rc = pci_enable_msix(dev, entries, nvec);
+		if (rc == 0)
+			return nvec;
+
+		kfree(dev->irq_affinity);
+		dev->irq_affinity = NULL;
+
+		if (rc < 0)
+			return rc;
+		if (rc < minvec)
+			return -ENOSPC;
+
+		nvec = rc;
+	}
 }
-EXPORT_SYMBOL(pci_enable_msi_range);
 
 /**
  * pci_enable_msix_range - configure device's MSI-X capability structure
@@ -1097,28 +1158,101 @@ EXPORT_SYMBOL(pci_enable_msi_range);
  * with new allocated MSI-X interrupts.
  **/
 int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
-			       int minvec, int maxvec)
+		int minvec, int maxvec)
 {
-	int nvec = maxvec;
-	int rc;
+	return __pci_enable_msix_range(dev, entries, minvec, maxvec,
+			PCI_IRQ_NOAFFINITY);
+}
+EXPORT_SYMBOL(pci_enable_msix_range);
 
-	if (maxvec < minvec)
-		return -ERANGE;
+/**
+ * pci_alloc_irq_vectors - allocate multiple IRQs for a device
+ * @dev:		PCI device to operate on
+ * @min_vecs:		minimum number of vectors required (must be >= 1)
+ * @max_vecs:		maximum (desired) number of vectors
+ * @flags:		flags or quirks for the allocation
+ *
+ * Allocate up to @max_vecs interrupt vectors for @dev, using MSI-X or MSI
+ * vectors if available, and fall back to a single legacy vector
+ * if neither is available.  Return the number of vectors allocated,
+ * (which might be smaller than @max_vecs) if successful, or a negative
+ * error code on error. If less than @min_vecs interrupt vectors are
+ * available for @dev the function will fail with -ENOSPC.
+ *
+ * To get the Linux IRQ number used for a vector that can be passed to
+ * request_irq() use the pci_irq_vector() helper.
+ */
+int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
+		unsigned int max_vecs, unsigned int flags)
+{
+	int vecs = -ENOSPC;
 
-	do {
-		rc = pci_enable_msix(dev, entries, nvec);
-		if (rc < 0) {
-			return rc;
-		} else if (rc > 0) {
-			if (rc < minvec)
-				return -ENOSPC;
-			nvec = rc;
+	if (!(flags & PCI_IRQ_NOMSIX)) {
+		vecs = __pci_enable_msix_range(dev, NULL, min_vecs, max_vecs,
+				flags);
+		if (vecs > 0)
+			return vecs;
+	}
+
+	if (!(flags & PCI_IRQ_NOMSI)) {
+		vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, flags);
+		if (vecs > 0)
+			return vecs;
+	}
+
+	/* use legacy irq if allowed */
+	if (!(flags & PCI_IRQ_NOLEGACY) && min_vecs == 1)
+		return 1;
+	return vecs;
+}
+EXPORT_SYMBOL(pci_alloc_irq_vectors);
+
+/**
+ * pci_free_irq_vectors - free previously allocated IRQs for a device
+ * @dev:		PCI device to operate on
+ *
+ * Undoes the allocations and enabling in pci_alloc_irq_vectors().
+ */
+void pci_free_irq_vectors(struct pci_dev *dev)
+{
+	pci_disable_msix(dev);
+	pci_disable_msi(dev);
+}
+EXPORT_SYMBOL(pci_free_irq_vectors);
+
+/**
+ * pci_irq_vector - return Linux IRQ number of a device vector
+ * @dev: PCI device to operate on
+ * @nr: device-relative interrupt vector index (0-based).
+ */
+int pci_irq_vector(struct pci_dev *dev, unsigned int nr)
+{
+	if (dev->msix_enabled) {
+		struct msi_desc *entry;
+		int i = 0;
+
+		for_each_pci_msi_entry(entry, dev) {
+			if (i == nr)
+				return entry->irq;
+			i++;
 		}
-	} while (rc);
+		WARN_ON_ONCE(1);
+		return -EINVAL;
+	}
 
-	return nvec;
+	if (dev->msi_enabled) {
+		struct msi_desc *entry = first_pci_msi_entry(dev);
+
+		if (WARN_ON_ONCE(nr >= entry->nvec_used))
+			return -EINVAL;
+	} else {
+		if (WARN_ON_ONCE(nr > 0))
+			return -EINVAL;
+	}
+
+	return dev->irq + nr;
 }
-EXPORT_SYMBOL(pci_enable_msix_range);
+EXPORT_SYMBOL(pci_irq_vector);
 
 struct pci_dev *msi_desc_to_pci_dev(struct msi_desc *desc)
 {
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index d7ffd66814bb..e39a67c8ef39 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -777,7 +777,7 @@ static int pci_pm_suspend_noirq(struct device *dev)
 
 	if (!pci_dev->state_saved) {
 		pci_save_state(pci_dev);
-		if (!pci_has_subordinate(pci_dev))
+		if (pci_power_manageable(pci_dev))
 			pci_prepare_to_sleep(pci_dev);
 	}
 
@@ -1144,7 +1144,6 @@ static int pci_pm_runtime_suspend(struct device *dev)
 		return -ENOSYS;
 
 	pci_dev->state_saved = false;
-	pci_dev->no_d3cold = false;
 	error = pm->runtime_suspend(dev);
 	if (error) {
 		/*
@@ -1161,8 +1160,6 @@ static int pci_pm_runtime_suspend(struct device *dev)
 
 		return error;
 	}
-	if (!pci_dev->d3cold_allowed)
-		pci_dev->no_d3cold = true;
 
 	pci_fixup_device(pci_fixup_suspend, pci_dev);
 
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index d319a9ca9b7b..bcd10c795284 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -406,6 +406,11 @@ static ssize_t d3cold_allowed_store(struct device *dev,
 		return -EINVAL;
 
 	pdev->d3cold_allowed = !!val;
+	if (pdev->d3cold_allowed)
+		pci_d3cold_enable(pdev);
+	else
+		pci_d3cold_disable(pdev);
+
 	pm_runtime_resume(dev);
 
 	return count;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index badbddc683f0..aab9d5115a5f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -7,8 +7,10 @@
  *	Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
  */
 
+#include <linux/acpi.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_pci.h>
@@ -25,7 +27,9 @@
 #include <linux/device.h>
 #include <linux/pm_runtime.h>
 #include <linux/pci_hotplug.h>
+#include <linux/vmalloc.h>
 #include <asm/setup.h>
+#include <asm/dma.h>
 #include <linux/aer.h>
 #include "pci.h"
 
@@ -81,6 +85,9 @@ unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
 unsigned long pci_hotplug_io_size  = DEFAULT_HOTPLUG_IO_SIZE;
 unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
 
+#define DEFAULT_HOTPLUG_BUS_SIZE	1
+unsigned long pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE;
+
 enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT;
 
 /*
@@ -101,6 +108,21 @@ unsigned int pcibios_max_latency = 255;
 /* If set, the PCIe ARI capability will not be used. */
 static bool pcie_ari_disabled;
 
+/* Disable bridge_d3 for all PCIe ports */
+static bool pci_bridge_d3_disable;
+/* Force bridge_d3 for all PCIe ports */
+static bool pci_bridge_d3_force;
+
+static int __init pcie_port_pm_setup(char *str)
+{
+	if (!strcmp(str, "off"))
+		pci_bridge_d3_disable = true;
+	else if (!strcmp(str, "force"))
+		pci_bridge_d3_force = true;
+	return 1;
+}
+__setup("pcie_port_pm=", pcie_port_pm_setup);
+
 /**
  * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
  * @bus: pointer to PCI bus structure to search
@@ -2156,6 +2178,164 @@ void pci_config_pm_runtime_put(struct pci_dev *pdev)
 }
 
 /**
+ * pci_bridge_d3_possible - Is it possible to put the bridge into D3
+ * @bridge: Bridge to check
+ *
+ * This function checks if it is possible to move the bridge to D3.
+ * Currently we only allow D3 for recent enough PCIe ports.
+ */
+static bool pci_bridge_d3_possible(struct pci_dev *bridge)
+{
+	unsigned int year;
+
+	if (!pci_is_pcie(bridge))
+		return false;
+
+	switch (pci_pcie_type(bridge)) {
+	case PCI_EXP_TYPE_ROOT_PORT:
+	case PCI_EXP_TYPE_UPSTREAM:
+	case PCI_EXP_TYPE_DOWNSTREAM:
+		if (pci_bridge_d3_disable)
+			return false;
+		if (pci_bridge_d3_force)
+			return true;
+
+		/*
+		 * It should be safe to put PCIe ports from 2015 or newer
+		 * to D3.
+		 */
+		if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) &&
+		    year >= 2015) {
+			return true;
+		}
+		break;
+	}
+
+	return false;
+}
+
+static int pci_dev_check_d3cold(struct pci_dev *dev, void *data)
+{
+	bool *d3cold_ok = data;
+	bool no_d3cold;
+
+	/*
+	 * The device needs to be allowed to go D3cold and if it is wake
+	 * capable to do so from D3cold.
+	 */
+	no_d3cold = dev->no_d3cold || !dev->d3cold_allowed ||
+		(device_may_wakeup(&dev->dev) && !pci_pme_capable(dev, PCI_D3cold)) ||
+		!pci_power_manageable(dev);
+
+	*d3cold_ok = !no_d3cold;
+
+	return no_d3cold;
+}
+
+/*
+ * pci_bridge_d3_update - Update bridge D3 capabilities
+ * @dev: PCI device which is changed
+ * @remove: Is the device being removed
+ *
+ * Update upstream bridge PM capabilities accordingly depending on if the
+ * device PM configuration was changed or the device is being removed.  The
+ * change is also propagated upstream.
+ */
+static void pci_bridge_d3_update(struct pci_dev *dev, bool remove)
+{
+	struct pci_dev *bridge;
+	bool d3cold_ok = true;
+
+	bridge = pci_upstream_bridge(dev);
+	if (!bridge || !pci_bridge_d3_possible(bridge))
+		return;
+
+	pci_dev_get(bridge);
+	/*
+	 * If the device is removed we do not care about its D3cold
+	 * capabilities.
+	 */
+	if (!remove)
+		pci_dev_check_d3cold(dev, &d3cold_ok);
+
+	if (d3cold_ok) {
+		/*
+		 * We need to go through all children to find out if all of
+		 * them can still go to D3cold.
+		 */
+		pci_walk_bus(bridge->subordinate, pci_dev_check_d3cold,
+			     &d3cold_ok);
+	}
+
+	if (bridge->bridge_d3 != d3cold_ok) {
+		bridge->bridge_d3 = d3cold_ok;
+		/* Propagate change to upstream bridges */
+		pci_bridge_d3_update(bridge, false);
+	}
+
+	pci_dev_put(bridge);
+}
+
+/**
+ * pci_bridge_d3_device_changed - Update bridge D3 capabilities on change
+ * @dev: PCI device that was changed
+ *
+ * If a device is added or its PM configuration, such as is it allowed to
+ * enter D3cold, is changed this function updates upstream bridge PM
+ * capabilities accordingly.
+ */
+void pci_bridge_d3_device_changed(struct pci_dev *dev)
+{
+	pci_bridge_d3_update(dev, false);
+}
+
+/**
+ * pci_bridge_d3_device_removed - Update bridge D3 capabilities on remove
+ * @dev: PCI device being removed
+ *
+ * Function updates upstream bridge PM capabilities based on other devices
+ * still left on the bus.
+ */
+void pci_bridge_d3_device_removed(struct pci_dev *dev)
+{
+	pci_bridge_d3_update(dev, true);
+}
+
+/**
+ * pci_d3cold_enable - Enable D3cold for device
+ * @dev: PCI device to handle
+ *
+ * This function can be used in drivers to enable D3cold from the device
+ * they handle.  It also updates upstream PCI bridge PM capabilities
+ * accordingly.
+ */
+void pci_d3cold_enable(struct pci_dev *dev)
+{
+	if (dev->no_d3cold) {
+		dev->no_d3cold = false;
+		pci_bridge_d3_device_changed(dev);
+	}
+}
+EXPORT_SYMBOL_GPL(pci_d3cold_enable);
+
+/**
+ * pci_d3cold_disable - Disable D3cold for device
+ * @dev: PCI device to handle
+ *
+ * This function can be used in drivers to disable D3cold from the device
+ * they handle.  It also updates upstream PCI bridge PM capabilities
+ * accordingly.
+ */
+void pci_d3cold_disable(struct pci_dev *dev)
+{
+	if (!dev->no_d3cold) {
+		dev->no_d3cold = true;
+		pci_bridge_d3_device_changed(dev);
+	}
+}
+EXPORT_SYMBOL_GPL(pci_d3cold_disable);
+
+/**
  * pci_pm_init - Initialize PM functions of given PCI device
  * @dev: PCI device to handle.
  */
@@ -2189,6 +2369,7 @@ void pci_pm_init(struct pci_dev *dev)
 	dev->pm_cap = pm;
 	dev->d3_delay = PCI_PM_D3_WAIT;
 	dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
+	dev->bridge_d3 = pci_bridge_d3_possible(dev);
 	dev->d3cold_allowed = true;
 
 	dev->d1_support = false;
@@ -3165,6 +3346,23 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
 #endif
 }
 
+/**
+ *	pci_unmap_iospace - Unmap the memory mapped I/O space
+ *	@res: resource to be unmapped
+ *
+ *	Unmap the CPU virtual address @res from virtual address space.
+ *	Only architectures that have memory mapped IO functions defined
+ *	(and the PCI_IOBASE value defined) should call this function.
+ */
+void pci_unmap_iospace(struct resource *res)
+{
+#if defined(PCI_IOBASE) && defined(CONFIG_MMU)
+	unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start;
+
+	unmap_kernel_range(vaddr, resource_size(res));
+#endif
+}
+
 static void __pci_set_master(struct pci_dev *dev, bool enable)
 {
 	u16 old_cmd, cmd;
@@ -4755,6 +4953,7 @@ static DEFINE_SPINLOCK(resource_alignment_lock);
 static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
 {
 	int seg, bus, slot, func, align_order, count;
+	unsigned short vendor, device, subsystem_vendor, subsystem_device;
 	resource_size_t align = 0;
 	char *p;
 
@@ -4768,28 +4967,55 @@ static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
 		} else {
 			align_order = -1;
 		}
-		if (sscanf(p, "%x:%x:%x.%x%n",
-			&seg, &bus, &slot, &func, &count) != 4) {
-			seg = 0;
-			if (sscanf(p, "%x:%x.%x%n",
-					&bus, &slot, &func, &count) != 3) {
-				/* Invalid format */
-				printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n",
-					p);
+		if (strncmp(p, "pci:", 4) == 0) {
+			/* PCI vendor/device (subvendor/subdevice) ids are specified */
+			p += 4;
+			if (sscanf(p, "%hx:%hx:%hx:%hx%n",
+				&vendor, &device, &subsystem_vendor, &subsystem_device, &count) != 4) {
+				if (sscanf(p, "%hx:%hx%n", &vendor, &device, &count) != 2) {
+					printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: pci:%s\n",
+						p);
+					break;
+				}
+				subsystem_vendor = subsystem_device = 0;
+			}
+			p += count;
+			if ((!vendor || (vendor == dev->vendor)) &&
+				(!device || (device == dev->device)) &&
+				(!subsystem_vendor || (subsystem_vendor == dev->subsystem_vendor)) &&
+				(!subsystem_device || (subsystem_device == dev->subsystem_device))) {
+				if (align_order == -1)
+					align = PAGE_SIZE;
+				else
+					align = 1 << align_order;
+				/* Found */
 				break;
 			}
 		}
-		p += count;
-		if (seg == pci_domain_nr(dev->bus) &&
-			bus == dev->bus->number &&
-			slot == PCI_SLOT(dev->devfn) &&
-			func == PCI_FUNC(dev->devfn)) {
-			if (align_order == -1)
-				align = PAGE_SIZE;
-			else
-				align = 1 << align_order;
-			/* Found */
-			break;
+		else {
+			if (sscanf(p, "%x:%x:%x.%x%n",
+				&seg, &bus, &slot, &func, &count) != 4) {
+				seg = 0;
+				if (sscanf(p, "%x:%x.%x%n",
+						&bus, &slot, &func, &count) != 3) {
+					/* Invalid format */
+					printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n",
+						p);
+					break;
+				}
+			}
+			p += count;
+			if (seg == pci_domain_nr(dev->bus) &&
+				bus == dev->bus->number &&
+				slot == PCI_SLOT(dev->devfn) &&
+				func == PCI_FUNC(dev->devfn)) {
+				if (align_order == -1)
+					align = PAGE_SIZE;
+				else
+					align = 1 << align_order;
+				/* Found */
+				break;
+			}
 		}
 		if (*p != ';' && *p != ',') {
 			/* End of param or invalid format */
@@ -4897,7 +5123,7 @@ static ssize_t pci_resource_alignment_store(struct bus_type *bus,
 	return pci_set_resource_alignment_param(buf, count);
 }
 
-BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
+static BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
 					pci_resource_alignment_store);
 
 static int __init pci_resource_alignment_sysfs_init(void)
@@ -4923,7 +5149,7 @@ int pci_get_new_domain_nr(void)
 }
 
 #ifdef CONFIG_PCI_DOMAINS_GENERIC
-void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
+static int of_pci_bus_find_domain_nr(struct device *parent)
 {
 	static int use_dt_domains = -1;
 	int domain = -1;
@@ -4967,7 +5193,13 @@ void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
 		domain = -1;
 	}
 
-	bus->domain_nr = domain;
+	return domain;
+}
+
+int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent)
+{
+	return acpi_disabled ? of_pci_bus_find_domain_nr(parent) :
+			       acpi_pci_bus_find_domain_nr(bus);
 }
 #endif
 #endif
@@ -5021,6 +5253,11 @@ static int __init pci_setup(char *str)
 				pci_hotplug_io_size = memparse(str + 9, &str);
 			} else if (!strncmp(str, "hpmemsize=", 10)) {
 				pci_hotplug_mem_size = memparse(str + 10, &str);
+			} else if (!strncmp(str, "hpbussize=", 10)) {
+				pci_hotplug_bus_size =
+					simple_strtoul(str + 10, &str, 0);
+				if (pci_hotplug_bus_size > 0xff)
+					pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE;
 			} else if (!strncmp(str, "pcie_bus_tune_off", 17)) {
 				pcie_bus_config = PCIE_BUS_TUNE_OFF;
 			} else if (!strncmp(str, "pcie_bus_safe", 13)) {
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a814bbb80fcb..9730c474b016 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -82,6 +82,8 @@ void pci_pm_init(struct pci_dev *dev);
 void pci_ea_init(struct pci_dev *dev);
 void pci_allocate_cap_save_buffers(struct pci_dev *dev);
 void pci_free_cap_save_buffers(struct pci_dev *dev);
+void pci_bridge_d3_device_changed(struct pci_dev *dev);
+void pci_bridge_d3_device_removed(struct pci_dev *dev);
 
 static inline void pci_wakeup_event(struct pci_dev *dev)
 {
@@ -94,6 +96,15 @@ static inline bool pci_has_subordinate(struct pci_dev *pci_dev)
 	return !!(pci_dev->subordinate);
 }
 
+static inline bool pci_power_manageable(struct pci_dev *pci_dev)
+{
+	/*
+	 * Currently we allow normal PCI devices and PCI bridges transition
+	 * into D3 if their bridge_d3 is set.
+	 */
+	return !pci_has_subordinate(pci_dev) || pci_dev->bridge_d3;
+}
+
 struct pci_vpd_ops {
 	ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
 	ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 22ca6412bd15..7fcea75afa4c 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -83,7 +83,7 @@ config PCIE_PME
 	depends on PCIEPORTBUS && PM
 
 config PCIE_DPC
-	tristate "PCIe Downstream Port Containment support"
+	bool "PCIe Downstream Port Containment support"
 	depends on PCIEPORTBUS
 	default n
 	help
@@ -92,6 +92,3 @@ config PCIE_DPC
 	  will be handled by the DPC driver.  If your system doesn't
 	  have this capability or you do not want to use this feature,
 	  it is safe to answer N.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called pcie-dpc.
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 2dfe7fdb77e7..0ec649d961d7 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -139,7 +139,7 @@ static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
 static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
 {
 	/* Don't enable Clock PM if the link is not Clock PM capable */
-	if (!link->clkpm_capable && enable)
+	if (!link->clkpm_capable)
 		enable = 0;
 	/* Need nothing if the specified equals to current state */
 	if (link->clkpm_enabled == enable)
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index ab552f1bc08f..250f87861786 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -15,8 +15,8 @@
 
 struct dpc_dev {
 	struct pcie_device	*dev;
-	struct work_struct 	work;
-	int 			cap_pos;
+	struct work_struct	work;
+	int			cap_pos;
 };
 
 static void dpc_wait_link_inactive(struct pci_dev *pdev)
@@ -89,7 +89,7 @@ static int dpc_probe(struct pcie_device *dev)
 	int status;
 	u16 ctl, cap;
 
-	dpc = kzalloc(sizeof(*dpc), GFP_KERNEL);
+	dpc = devm_kzalloc(&dev->device, sizeof(*dpc), GFP_KERNEL);
 	if (!dpc)
 		return -ENOMEM;
 
@@ -98,11 +98,12 @@ static int dpc_probe(struct pcie_device *dev)
 	INIT_WORK(&dpc->work, interrupt_event_handler);
 	set_service_data(dev, dpc);
 
-	status = request_irq(dev->irq, dpc_irq, IRQF_SHARED, "pcie-dpc", dpc);
+	status = devm_request_irq(&dev->device, dev->irq, dpc_irq, IRQF_SHARED,
+				  "pcie-dpc", dpc);
 	if (status) {
 		dev_warn(&dev->device, "request IRQ%d failed: %d\n", dev->irq,
 			 status);
-		goto out;
+		return status;
 	}
 
 	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &cap);
@@ -117,9 +118,6 @@ static int dpc_probe(struct pcie_device *dev)
 		FLAG(cap, PCI_EXP_DPC_CAP_SW_TRIGGER), (cap >> 8) & 0xf,
 		FLAG(cap, PCI_EXP_DPC_CAP_DL_ACTIVE));
 	return status;
- out:
-	kfree(dpc);
-	return status;
 }
 
 static void dpc_remove(struct pcie_device *dev)
@@ -131,14 +129,11 @@ static void dpc_remove(struct pcie_device *dev)
 	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl);
 	ctl &= ~(PCI_EXP_DPC_CTL_EN_NONFATAL | PCI_EXP_DPC_CTL_INT_EN);
 	pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
-
-	free_irq(dev->irq, dpc);
-	kfree(dpc);
 }
 
 static struct pcie_port_service_driver dpcdriver = {
 	.name		= "dpc",
-	.port_type	= PCI_EXP_TYPE_ROOT_PORT | PCI_EXP_TYPE_DOWNSTREAM,
+	.port_type	= PCIE_ANY_PORT,
 	.service	= PCIE_PORT_SERVICE_DPC,
 	.probe		= dpc_probe,
 	.remove		= dpc_remove,
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 32d4d0a3d20e..e9270b4026f3 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/pm.h>
+#include <linux/pm_runtime.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/pcieport_if.h>
@@ -342,6 +343,8 @@ static int pcie_device_init(struct pci_dev *pdev, int service, int irq)
 		return retval;
 	}
 
+	pm_runtime_no_callbacks(device);
+
 	return 0;
 }
 
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index be35da2e105e..70d7ad8c6d17 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -93,6 +93,26 @@ static int pcie_port_resume_noirq(struct device *dev)
 	return 0;
 }
 
+static int pcie_port_runtime_suspend(struct device *dev)
+{
+	return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
+}
+
+static int pcie_port_runtime_resume(struct device *dev)
+{
+	return 0;
+}
+
+static int pcie_port_runtime_idle(struct device *dev)
+{
+	/*
+	 * Assume the PCI core has set bridge_d3 whenever it thinks the port
+	 * should be good to go to D3.  Everything else, including moving
+	 * the port to D3, is handled by the PCI core.
+	 */
+	return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
+}
+
 static const struct dev_pm_ops pcie_portdrv_pm_ops = {
 	.suspend	= pcie_port_device_suspend,
 	.resume		= pcie_port_device_resume,
@@ -101,6 +121,9 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
 	.poweroff	= pcie_port_device_suspend,
 	.restore	= pcie_port_device_resume,
 	.resume_noirq	= pcie_port_resume_noirq,
+	.runtime_suspend = pcie_port_runtime_suspend,
+	.runtime_resume	= pcie_port_runtime_resume,
+	.runtime_idle	= pcie_port_runtime_idle,
 };
 
 #define PCIE_PORTDRV_PM_OPS	(&pcie_portdrv_pm_ops)
@@ -134,16 +157,39 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
 		return status;
 
 	pci_save_state(dev);
+
 	/*
-	 * D3cold may not work properly on some PCIe port, so disable
-	 * it by default.
+	 * Prevent runtime PM if the port is advertising support for PCIe
+	 * hotplug.  Otherwise the BIOS hotplug SMI code might not be able
+	 * to enumerate devices behind this port properly (the port is
+	 * powered down preventing all config space accesses to the
+	 * subordinate devices).  We can't be sure for native PCIe hotplug
+	 * either so prevent that as well.
 	 */
-	dev->d3cold_allowed = false;
+	if (!dev->is_hotplug_bridge) {
+		/*
+		 * Keep the port resumed 100ms to make sure things like
+		 * config space accesses from userspace (lspci) will not
+		 * cause the port to repeatedly suspend and resume.
+		 */
+		pm_runtime_set_autosuspend_delay(&dev->dev, 100);
+		pm_runtime_use_autosuspend(&dev->dev);
+		pm_runtime_mark_last_busy(&dev->dev);
+		pm_runtime_put_autosuspend(&dev->dev);
+		pm_runtime_allow(&dev->dev);
+	}
+
 	return 0;
 }
 
 static void pcie_portdrv_remove(struct pci_dev *dev)
 {
+	if (!dev->is_hotplug_bridge) {
+		pm_runtime_forbid(&dev->dev);
+		pm_runtime_get_noresume(&dev->dev);
+		pm_runtime_dont_use_autosuspend(&dev->dev);
+	}
+
 	pcie_port_device_remove(dev);
 }
 
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8e3ef720997d..93f280df3428 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -16,6 +16,7 @@
 #include <linux/aer.h>
 #include <linux/acpi.h>
 #include <linux/irqdomain.h>
+#include <linux/pm_runtime.h>
 #include "pci.h"
 
 #define CARDBUS_LATENCY_TIMER	176	/* secondary latency timer */
@@ -832,6 +833,12 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
 	u8 primary, secondary, subordinate;
 	int broken = 0;
 
+	/*
+	 * Make sure the bridge is powered on to be able to access config
+	 * space of devices below it.
+	 */
+	pm_runtime_get_sync(&dev->dev);
+
 	pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
 	primary = buses & 0xFF;
 	secondary = (buses >> 8) & 0xFF;
@@ -1012,6 +1019,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
 out:
 	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
 
+	pm_runtime_put(&dev->dev);
+
 	return max;
 }
 EXPORT_SYMBOL(pci_scan_bridge);
@@ -2077,6 +2086,15 @@ unsigned int pci_scan_child_bus(struct pci_bus *bus)
 		}
 
 	/*
+	 * Make sure a hotplug bridge has at least the minimum requested
+	 * number of buses.
+	 */
+	if (bus->self && bus->self->is_hotplug_bridge && pci_hotplug_bus_size) {
+		if (max - bus->busn_res.start < pci_hotplug_bus_size - 1)
+			max = bus->busn_res.start + pci_hotplug_bus_size - 1;
+	}
+
+	/*
 	 * We've scanned the bus and so we know all about what's on
 	 * the other side of any bridges that may be on this bus plus
 	 * any devices.
@@ -2127,7 +2145,9 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
 	b->sysdata = sysdata;
 	b->ops = ops;
 	b->number = b->busn_res.start = bus;
-	pci_bus_assign_domain_nr(b, parent);
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+	b->domain_nr = pci_bus_find_domain_nr(b, parent);
+#endif
 	b2 = pci_find_bus(pci_domain_nr(b), bus);
 	if (b2) {
 		/* If we already got to this bus through a different bridge, ignore it */
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 3f155e78513f..2408abe4ee8c 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -231,7 +231,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	struct pci_dev *dev = PDE_DATA(file_inode(file));
 	struct pci_filp_private *fpriv = file->private_data;
-	int i, ret;
+	int i, ret, write_combine;
 
 	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
@@ -245,9 +245,12 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
 	if (i >= PCI_ROM_RESOURCE)
 		return -ENODEV;
 
+	if (fpriv->mmap_state == pci_mmap_mem)
+		write_combine = fpriv->write_combine;
+	else
+		write_combine = 0;
 	ret = pci_mmap_page_range(dev, vma,
-				  fpriv->mmap_state,
-				  fpriv->write_combine);
+				  fpriv->mmap_state, write_combine);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ee72ebe18f4b..37ff0158e45f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3189,13 +3189,15 @@ static void quirk_no_bus_reset(struct pci_dev *dev)
 }
 
 /*
- * Atheros AR93xx chips do not behave after a bus reset.  The device will
- * throw a Link Down error on AER-capable systems and regardless of AER,
- * config space of the device is never accessible again and typically
- * causes the system to hang or reset when access is attempted.
+ * Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset.
+ * The device will throw a Link Down error on AER-capable systems and
+ * regardless of AER, config space of the device is never accessible again
+ * and typically causes the system to hang or reset when access is attempted.
  * http://www.spinics.net/lists/linux-pci/msg34797.html
  */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset);
 
 static void quirk_no_pm_reset(struct pci_dev *dev)
 {
@@ -3711,6 +3713,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172,
 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a,
 			 quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c78 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9182,
+			 quirk_dma_func1_alias);
 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0,
 			 quirk_dma_func1_alias);
@@ -3747,6 +3752,9 @@ static const struct pci_device_id fixed_dma_alias_tbl[] = {
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285,
 			 PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */
 	  .driver_data = PCI_DEVFN(1, 0) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285,
+			 PCI_VENDOR_ID_ADAPTEC2, 0x02bc), /* Adaptec 3805 */
+	  .driver_data = PCI_DEVFN(1, 0) },
 	{ 0 }
 };
 
@@ -4087,6 +4095,7 @@ static const struct pci_dev_acs_enabled {
 	{ PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs },
 	{ PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_SOLARFLARE, 0x0A03, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs },
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 8982026637d5..d1ef7acf6930 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -96,6 +96,8 @@ static void pci_remove_bus_device(struct pci_dev *dev)
 		dev->subordinate = NULL;
 	}
 
+	pci_bridge_d3_device_removed(dev);
+
 	pci_destroy_dev(dev);
 }
 
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index d678c46e5f03..c74059e10a6d 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1428,6 +1428,74 @@ void pci_bus_assign_resources(const struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pci_bus_assign_resources);
 
+static void pci_claim_device_resources(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
+		struct resource *r = &dev->resource[i];
+
+		if (!r->flags || r->parent)
+			continue;
+
+		pci_claim_resource(dev, i);
+	}
+}
+
+static void pci_claim_bridge_resources(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
+		struct resource *r = &dev->resource[i];
+
+		if (!r->flags || r->parent)
+			continue;
+
+		pci_claim_bridge_resource(dev, i);
+	}
+}
+
+static void pci_bus_allocate_dev_resources(struct pci_bus *b)
+{
+	struct pci_dev *dev;
+	struct pci_bus *child;
+
+	list_for_each_entry(dev, &b->devices, bus_list) {
+		pci_claim_device_resources(dev);
+
+		child = dev->subordinate;
+		if (child)
+			pci_bus_allocate_dev_resources(child);
+	}
+}
+
+static void pci_bus_allocate_resources(struct pci_bus *b)
+{
+	struct pci_bus *child;
+
+	/*
+	 * Carry out a depth-first search on the PCI bus
+	 * tree to allocate bridge apertures. Read the
+	 * programmed bridge bases and recursively claim
+	 * the respective bridge resources.
+	 */
+	if (b->self) {
+		pci_read_bridge_bases(b);
+		pci_claim_bridge_resources(b->self);
+	}
+
+	list_for_each_entry(child, &b->children, node)
+		pci_bus_allocate_resources(child);
+}
+
+void pci_bus_claim_resources(struct pci_bus *b)
+{
+	pci_bus_allocate_resources(b);
+	pci_bus_allocate_dev_resources(b);
+}
+EXPORT_SYMBOL(pci_bus_claim_resources);
+
 static void __pci_bridge_assign_resources(const struct pci_dev *bridge,
 					  struct list_head *add_head,
 					  struct list_head *fail_head)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index adf61b43eb70..734a0428ef0e 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4854,20 +4854,17 @@ static int
 lpfc_enable_pci_dev(struct lpfc_hba *phba)
 {
 	struct pci_dev *pdev;
-	int bars = 0;
 
 	/* Obtain PCI device reference */
 	if (!phba->pcidev)
 		goto out_error;
 	else
 		pdev = phba->pcidev;
-	/* Select PCI BARs */
-	bars = pci_select_bars(pdev, IORESOURCE_MEM);
 	/* Enable PCI device */
 	if (pci_enable_device_mem(pdev))
 		goto out_error;
 	/* Request PCI resource for the device */
-	if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
+	if (pci_request_mem_regions(pdev, LPFC_DRIVER_NAME))
 		goto out_disable_device;
 	/* Set up device as PCI master and save state for EEH */
 	pci_set_master(pdev);
@@ -4884,7 +4881,7 @@ out_disable_device:
 	pci_disable_device(pdev);
 out_error:
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-			"1401 Failed to enable pci device, bars:x%x\n", bars);
+			"1401 Failed to enable pci device\n");
 	return -ENODEV;
 }
 
@@ -4899,17 +4896,14 @@ static void
 lpfc_disable_pci_dev(struct lpfc_hba *phba)
 {
 	struct pci_dev *pdev;
-	int bars;
 
 	/* Obtain PCI device reference */
 	if (!phba->pcidev)
 		return;
 	else
 		pdev = phba->pcidev;
-	/* Select PCI BARs */
-	bars = pci_select_bars(pdev, IORESOURCE_MEM);
 	/* Release PCI resource and disable PCI device */
-	pci_release_selected_regions(pdev, bars);
+	pci_release_mem_regions(pdev);
 	pci_disable_device(pdev);
 
 	return;
@@ -9811,7 +9805,6 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
 	struct lpfc_vport **vports;
 	struct lpfc_hba   *phba = vport->phba;
 	int i;
-	int bars = pci_select_bars(pdev, IORESOURCE_MEM);
 
 	spin_lock_irq(&phba->hbalock);
 	vport->load_flag |= FC_UNLOADING;
@@ -9886,7 +9879,7 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
 
 	lpfc_hba_free(phba);
 
-	pci_release_selected_regions(pdev, bars);
+	pci_release_mem_regions(pdev);
 	pci_disable_device(pdev);
 }
 
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c10972fcc8e4..4fd041bec332 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -387,7 +387,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	 * need to have the registers polled during D3, so avoid D3cold.
 	 */
 	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
-		pdev->no_d3cold = true;
+		pci_d3cold_disable(pdev);
 
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
 		xhci_pme_quirk(hcd);
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 89ab0572dbc6..7d63a66e8ed4 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -24,6 +24,8 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
 }
 extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
 
+extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
+
 static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
 {
 	struct pci_bus *pbus = pdev->bus;
diff --git a/drivers/pci/ecam.h b/include/linux/pci-ecam.h
index 9878bebd45bb..7adad206b1f4 100644
--- a/drivers/pci/ecam.h
+++ b/include/linux/pci-ecam.h
@@ -27,8 +27,7 @@ struct pci_config_window;
 struct pci_ecam_ops {
 	unsigned int			bus_shift;
 	struct pci_ops			pci_ops;
-	int				(*init)(struct device *,
-						struct pci_config_window *);
+	int				(*init)(struct pci_config_window *);
 };
 
 /*
@@ -45,6 +44,7 @@ struct pci_config_window {
 		void __iomem		*win;	/* 64-bit single mapping */
 		void __iomem		**winp; /* 32-bit per-bus mapping */
 	};
+	struct device			*parent;/* ECAM res was from this dev */
 };
 
 /* create and free pci_config_window */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c40ac910cce4..2599a980340f 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -101,6 +101,10 @@ enum {
 	DEVICE_COUNT_RESOURCE = PCI_NUM_RESOURCES,
 };
 
+/*
+ * pci_power_t values must match the bits in the Capabilities PME_Support
+ * and Control/Status PowerState fields in the Power Management capability.
+ */
 typedef int __bitwise pci_power_t;
 
 #define PCI_D0		((pci_power_t __force) 0)
@@ -116,7 +120,7 @@ extern const char *pci_power_names[];
 
 static inline const char *pci_power_name(pci_power_t state)
 {
-	return pci_power_names[1 + (int) state];
+	return pci_power_names[1 + (__force int) state];
 }
 
 #define PCI_PM_D2_DELAY		200
@@ -294,6 +298,7 @@ struct pci_dev {
 	unsigned int	d2_support:1;	/* Low power state D2 is supported */
 	unsigned int	no_d1d2:1;	/* D1 and D2 are forbidden */
 	unsigned int	no_d3cold:1;	/* D3cold is forbidden */
+	unsigned int	bridge_d3:1;	/* Allow D3 for bridge */
 	unsigned int	d3cold_allowed:1;	/* D3cold is allowed by user */
 	unsigned int	mmio_always_on:1;	/* disallow turning off io/mem
 						   decoding during bar sizing */
@@ -320,6 +325,7 @@ struct pci_dev {
 	 * directly, use the values stored here. They might be different!
 	 */
 	unsigned int	irq;
+	struct cpumask	*irq_affinity;
 	struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
 
 	bool match_driver;		/* Skip attaching driver */
@@ -1084,6 +1090,8 @@ int pci_back_from_sleep(struct pci_dev *dev);
 bool pci_dev_run_wake(struct pci_dev *dev);
 bool pci_check_pme_status(struct pci_dev *dev);
 void pci_pme_wakeup_bus(struct pci_bus *bus);
+void pci_d3cold_enable(struct pci_dev *dev);
+void pci_d3cold_disable(struct pci_dev *dev);
 
 static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
 				  bool enable)
@@ -1115,6 +1123,7 @@ int pci_set_vpd_size(struct pci_dev *dev, size_t len);
 /* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */
 resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx);
 void pci_bus_assign_resources(const struct pci_bus *bus);
+void pci_bus_claim_resources(struct pci_bus *bus);
 void pci_bus_size_bridges(struct pci_bus *bus);
 int pci_claim_resource(struct pci_dev *, int);
 int pci_claim_bridge_resource(struct pci_dev *bridge, int i);
@@ -1144,9 +1153,12 @@ void pci_add_resource(struct list_head *resources, struct resource *res);
 void pci_add_resource_offset(struct list_head *resources, struct resource *res,
 			     resource_size_t offset);
 void pci_free_resource_list(struct list_head *resources);
-void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags);
+void pci_bus_add_resource(struct pci_bus *bus, struct resource *res,
+			  unsigned int flags);
 struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n);
 void pci_bus_remove_resources(struct pci_bus *bus);
+int devm_request_pci_bus_resources(struct device *dev,
+				   struct list_head *resources);
 
 #define pci_bus_for_each_resource(bus, res, i)				\
 	for (i = 0;							\
@@ -1168,6 +1180,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size);
 unsigned long pci_address_to_pio(phys_addr_t addr);
 phys_addr_t pci_pio_to_address(unsigned long pio);
 int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
+void pci_unmap_iospace(struct resource *res);
 
 static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
 {
@@ -1238,6 +1251,11 @@ resource_size_t pcibios_iov_resource_alignment(struct pci_dev *dev, int resno);
 int pci_set_vga_state(struct pci_dev *pdev, bool decode,
 		      unsigned int command_bits, u32 flags);
 
+#define PCI_IRQ_NOLEGACY	(1 << 0) /* don't use legacy interrupts */
+#define PCI_IRQ_NOMSI		(1 << 1) /* don't use MSI interrupts */
+#define PCI_IRQ_NOMSIX		(1 << 2) /* don't use MSI-X interrupts */
+#define PCI_IRQ_NOAFFINITY	(1 << 3) /* don't auto-assign affinity */
+
 /* kmem_cache style wrapper around pci_alloc_consistent() */
 
 #include <linux/pci-dma.h>
@@ -1285,6 +1303,11 @@ static inline int pci_enable_msix_exact(struct pci_dev *dev,
 		return rc;
 	return 0;
 }
+int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
+		unsigned int max_vecs, unsigned int flags);
+void pci_free_irq_vectors(struct pci_dev *dev);
+int pci_irq_vector(struct pci_dev *dev, unsigned int nr);
+
 #else
 static inline int pci_msi_vec_count(struct pci_dev *dev) { return -ENOSYS; }
 static inline void pci_msi_shutdown(struct pci_dev *dev) { }
@@ -1308,6 +1331,24 @@ static inline int pci_enable_msix_range(struct pci_dev *dev,
 static inline int pci_enable_msix_exact(struct pci_dev *dev,
 		      struct msix_entry *entries, int nvec)
 { return -ENOSYS; }
+static inline int pci_alloc_irq_vectors(struct pci_dev *dev,
+		unsigned int min_vecs, unsigned int max_vecs,
+		unsigned int flags)
+{
+	if (min_vecs > 1)
+		return -EINVAL;
+	return 1;
+}
+static inline void pci_free_irq_vectors(struct pci_dev *dev)
+{
+}
+
+static inline int pci_irq_vector(struct pci_dev *dev, unsigned int nr)
+{
+	if (WARN_ON_ONCE(nr > 0))
+		return -EINVAL;
+	return dev->irq;
+}
 #endif
 
 #ifdef CONFIG_PCIEPORTBUS
@@ -1390,12 +1431,13 @@ static inline int pci_domain_nr(struct pci_bus *bus)
 {
 	return bus->domain_nr;
 }
-void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent);
+#ifdef CONFIG_ACPI
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus);
 #else
-static inline void pci_bus_assign_domain_nr(struct pci_bus *bus,
-					struct device *parent)
-{
-}
+static inline int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{ return 0; }
+#endif
+int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent);
 #endif
 
 /* some architectures require additional setup to direct VGA traffic */
@@ -1403,6 +1445,34 @@ typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode,
 		      unsigned int command_bits, u32 flags);
 void pci_register_set_vga_state(arch_set_vga_state_t func);
 
+static inline int
+pci_request_io_regions(struct pci_dev *pdev, const char *name)
+{
+	return pci_request_selected_regions(pdev,
+			    pci_select_bars(pdev, IORESOURCE_IO), name);
+}
+
+static inline void
+pci_release_io_regions(struct pci_dev *pdev)
+{
+	return pci_release_selected_regions(pdev,
+			    pci_select_bars(pdev, IORESOURCE_IO));
+}
+
+static inline int
+pci_request_mem_regions(struct pci_dev *pdev, const char *name)
+{
+	return pci_request_selected_regions(pdev,
+			    pci_select_bars(pdev, IORESOURCE_MEM), name);
+}
+
+static inline void
+pci_release_mem_regions(struct pci_dev *pdev)
+{
+	return pci_release_selected_regions(pdev,
+			    pci_select_bars(pdev, IORESOURCE_MEM));
+}
+
 #else /* CONFIG_PCI is not enabled */
 
 static inline void pci_set_flags(int flags) { }
@@ -1555,7 +1625,11 @@ static inline const char *pci_name(const struct pci_dev *pdev)
 /* Some archs don't want to expose struct resource to userland as-is
  * in sysfs and /proc
  */
-#ifndef HAVE_ARCH_PCI_RESOURCE_TO_USER
+#ifdef HAVE_ARCH_PCI_RESOURCE_TO_USER
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc,
+			  resource_size_t *start, resource_size_t *end);
+#else
 static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
 		const struct resource *rsrc, resource_size_t *start,
 		resource_size_t *end)
@@ -1707,6 +1781,7 @@ extern u8 pci_cache_line_size;
 
 extern unsigned long pci_hotplug_io_size;
 extern unsigned long pci_hotplug_mem_size;
+extern unsigned long pci_hotplug_bus_size;
 
 /* Architecture-specific versions may override these (weak) */
 void pcibios_disable_device(struct pci_dev *dev);
@@ -1723,7 +1798,7 @@ void pcibios_free_irq(struct pci_dev *dev);
 extern struct dev_pm_ops pcibios_pm_ops;
 #endif
 
-#ifdef CONFIG_PCI_MMCONFIG
+#if defined(CONFIG_PCI_MMCONFIG) || defined(CONFIG_ACPI_MCFG)
 void __init pci_mmcfg_early_init(void);
 void __init pci_mmcfg_late_init(void);
 #else