diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-01-20 18:21:32 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-01-20 18:21:32 -0800 |
| commit | 62c79bb3a99fb46a8624f9c7e86fa5ee2f936360 (patch) | |
| tree | a023f8c74efc1488e48a7252d97773f30acb58ee | |
| parent | 6d1c244803f2c013fb9c31b0904c01f1830b73ab (diff) | |
| parent | d07822a7ed2484908fb0d86f5f1dec27db0da439 (diff) | |
| download | linux-62c79bb3a99fb46a8624f9c7e86fa5ee2f936360.tar.bz2 | |
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Olof Johansson:
"This is the first release where we split up the 64-bit contributions a
bit more, and in particular we are having a separate DT branch for
them.
Contents:
- New devices added to Broadcom NorthStar2
- Misc fixes for Exynos7 boards
- QCOM updates for MSM8916
- Rockchip tweaks for rk3368 SoC and eval board
- A series of fixes for APM X-Gene v1 and v2
- Renesas R8A7795 CPU/PSCI additions
- Marvell Berlin4CT PSCI, cpuidle, watchdog portions
- Freescale LS1043a SoC and dev board support
+ some treewide or other misc changes"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
dts/ls2080a: Update DTSI to add support of SP805 WDT
Documentation: DT: Add entry for ARM SP805-WDT
arm64: dts: X-Gene v2: I2C1 clock is always on
arm64: dts: X-Gene v1: I2C0 clock is always on
arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms
arm64: dts: hikey: add label properties to UARTs
arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
arm64: dts: apq8016-sbc: enable UART0 on LS connector
arm64: dts: juno: Add idle-states to device tree
arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC
arm64: dts: add LS1043a-RDB board support
arm64: dts: add Freescale LS1043a SoC support
Documentation: DT: Add entry for Freescale LS1043a-RDB board
arm64: dts: uniphier: add PH1-LD10 SoC/board support
arm64: renesas: r8a7795: fix SATA clock assignment
arm64: dts: salvator-x: Enable SATA controller
arm64: dts: r8a7795: Add SATA controller node
arm64: renesas: r8a7795: add internal delay for i2c IPs
arm64: renesas: salvator-x: Add board part number to DT bindings
arm64: dts: r8a7795: Add pmu device nodes
...
46 files changed, 4217 insertions, 26 deletions
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 34c88b0c7ab4..752a685d926f 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -131,6 +131,10 @@ Example: Freescale ARMv8 based Layerscape SoC family Device Tree Bindings ---------------------------------------------------------------- +LS1043A ARMv8 based RDB Board +Required root node properties: + - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a"; + LS2080A ARMv8 based Simulator model Required root node properties: - compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index c980b2b81227..078c14fcdaaa 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -87,6 +87,10 @@ Rockchip platforms device tree bindings "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; +- Rockchip RK3368 evb: + Required root node properties: + - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368"; + - Rockchip R88 board: Required root node properties: - compatible = "rockchip,r88", "rockchip,rk3368"; diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 40bb9007cd0d..9cf67e48f222 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -27,6 +27,8 @@ SoCs: compatible = "renesas,r8a7793" - R-Car E2 (R8A77940) compatible = "renesas,r8a7794" + - R-Car H3 (R8A77950) + compatible = "renesas,r8a7795" Boards: @@ -57,5 +59,7 @@ Boards: compatible = "renesas,marzen", "renesas,r8a7779" - Porter (M2-LCDP) compatible = "renesas,porter", "renesas,r8a7791" + - Salvator-X (RTP0RC7795SIPB0010S) + compatible = "renesas,salvator-x", "renesas,r8a7795"; - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" diff --git a/Documentation/devicetree/bindings/watchdog/sp805-wdt.txt b/Documentation/devicetree/bindings/watchdog/sp805-wdt.txt new file mode 100644 index 000000000000..edc4f0ea54a3 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/sp805-wdt.txt @@ -0,0 +1,31 @@ +* ARM SP805 Watchdog Timer (WDT) Controller + +SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that +can be used to identify the peripheral type, vendor, and revision. +This value can be used for driver matching. + +As SP805 WDT is a primecell IP, it follows the base bindings specified in +'arm/primecell.txt' + +Required properties: +- compatible : Should be "arm,sp805-wdt", "arm,primecell" +- reg : Base address and size of the watchdog timer registers. +- clocks : From common clock binding. + First clock is PCLK and the second is WDOGCLK. + WDOGCLK can be equal to or be a sub-multiple of the PCLK frequency. +- clock-names : From common clock binding. + Shall be "apb_pclk" for first clock and "wdog_clk" for the + second one. + +Optional properties: +- interrupts : Should specify WDT interrupt number. + +Examples: + + cluster1_core0_watchdog: wdt@c000000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + diff --git a/MAINTAINERS b/MAINTAINERS index f79d8cb3edc2..9268e83a9065 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1435,6 +1435,15 @@ M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +ARM/RENESAS ARM64 ARCHITECTURE +M: Simon Horman <horms@verge.net.au> +M: Magnus Damm <magnus.damm@gmail.com> +L: linux-sh@vger.kernel.org +Q: http://patchwork.kernel.org/project/linux-sh/list/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next +S: Supported +F: arch/arm64/boot/dts/renesas/ + ARM/RISCPC ARCHITECTURE M: Russell King <linux@arm.linux.org.uk> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -1663,6 +1672,7 @@ F: arch/arm/boot/dts/uniphier* F: arch/arm/include/asm/hardware/cache-uniphier.h F: arch/arm/mach-uniphier/ F: arch/arm/mm/cache-uniphier.c +F: arch/arm64/boot/dts/socionext/ F: drivers/i2c/busses/i2c-uniphier* F: drivers/pinctrl/uniphier/ F: drivers/tty/serial/8250/8250_uniphier.c diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 4043c35962cc..8446f27b18df 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -67,6 +67,23 @@ config ARCH_SEATTLE help This enables support for AMD Seattle SOC Family +config ARCH_SHMOBILE + bool + +config ARCH_RENESAS + bool "Renesas SoC Platforms" + select ARCH_SHMOBILE + select PINCTRL + select PM_GENERIC_DOMAINS if PM + help + This enables support for the ARMv8 based Renesas SoCs. + +config ARCH_R8A7795 + bool "Renesas R-Car H3 SoC Platform" + depends on ARCH_RENESAS + help + This enables support for the Renesas R-Car H3 SoC. + config ARCH_STRATIX10 bool "Altera's Stratix 10 SoCFPGA Family" help diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index eb3c42d97175..76e7510835b2 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -10,7 +10,9 @@ dts-dirs += hisilicon dts-dirs += marvell dts-dirs += mediatek dts-dirs += qcom +dts-dirs += renesas dts-dirs += rockchip +dts-dirs += socionext dts-dirs += sprd dts-dirs += xilinx diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts index 119a469bd189..e5ba8d5d0cae 100644 --- a/arch/arm64/boot/dts/apm/apm-merlin.dts +++ b/arch/arm64/boot/dts/apm/apm-merlin.dts @@ -70,3 +70,15 @@ &xgenet1 { status = "ok"; }; + +&mmc0 { + status = "ok"; +}; + +&i2c4 { + rtc68: rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + status = "ok"; + }; +}; diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts index 01cdeda93c3a..178aef2cdd09 100644 --- a/arch/arm64/boot/dts/apm/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts @@ -74,3 +74,7 @@ &xgenet { status = "ok"; }; + +&mmc0 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index c804f8f1f38c..5d87a3dc44b8 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -25,6 +25,7 @@ reg = <0x0 0x000>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_0>; }; cpu@001 { device_type = "cpu"; @@ -32,6 +33,7 @@ reg = <0x0 0x001>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_0>; }; cpu@100 { device_type = "cpu"; @@ -39,6 +41,7 @@ reg = <0x0 0x100>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_1>; }; cpu@101 { device_type = "cpu"; @@ -46,6 +49,7 @@ reg = <0x0 0x101>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_1>; }; cpu@200 { device_type = "cpu"; @@ -53,6 +57,7 @@ reg = <0x0 0x200>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_2>; }; cpu@201 { device_type = "cpu"; @@ -60,6 +65,7 @@ reg = <0x0 0x201>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_2>; }; cpu@300 { device_type = "cpu"; @@ -67,6 +73,7 @@ reg = <0x0 0x300>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_3>; }; cpu@301 { device_type = "cpu"; @@ -74,6 +81,19 @@ reg = <0x0 0x301>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_3>; + }; + xgene_L2_0: l2-cache-0 { + compatible = "cache"; + }; + xgene_L2_1: l2-cache-1 { + compatible = "cache"; + }; + xgene_L2_2: l2-cache-2 { + compatible = "cache"; + }; + xgene_L2_3: l2-cache-3 { + compatible = "cache"; }; }; @@ -89,6 +109,86 @@ <0x0 0x780A0000 0x0 0x20000>, /* GIC CPU */ <0x0 0x780C0000 0x0 0x10000>, /* GIC VCPU Control */ <0x0 0x780E0000 0x0 0x20000>; /* GIC VCPU */ + v2m0: v2m@0x00000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x0 0x0 0x1000>; + }; + v2m1: v2m@0x10000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x10000 0x0 0x1000>; + }; + v2m2: v2m@0x20000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x20000 0x0 0x1000>; + }; + v2m3: v2m@0x30000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x30000 0x0 0x1000>; + }; + v2m4: v2m@0x40000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x40000 0x0 0x1000>; + }; + v2m5: v2m@0x50000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x50000 0x0 0x1000>; + }; + v2m6: v2m@0x60000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x60000 0x0 0x1000>; + }; + v2m7: v2m@0x70000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x70000 0x0 0x1000>; + }; + v2m8: v2m@0x80000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x80000 0x0 0x1000>; + }; + v2m9: v2m@0x90000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x90000 0x0 0x1000>; + }; + v2m10: v2m@0xA0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0xA0000 0x0 0x1000>; + }; + v2m11: v2m@0xB0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0xB0000 0x0 0x1000>; + }; + v2m12: v2m@0xC0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0xC0000 0x0 0x1000>; + }; + v2m13: v2m@0xD0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0xD0000 0x0 0x1000>; + }; + v2m14: v2m@0xE0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0xE0000 0x0 0x1000>; + }; + v2m15: v2m@0xF0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0xF0000 0x0 0x1000>; + }; }; pmu { @@ -140,6 +240,47 @@ clock-output-names = "socplldiv2"; }; + ahbclk: ahbclk@17000000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x17000000 0x0 0x2000>; + reg-names = "div-reg"; + divider-offset = <0x164>; + divider-width = <0x5>; + divider-shift = <0x0>; + clock-output-names = "ahbclk"; + }; + + sbapbclk: sbapbclk@1704c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&ahbclk 0>; + reg = <0x0 0x1704c000 0x0 0x2000>; + reg-names = "div-reg"; + divider-offset = <0x10>; + divider-width = <0x2>; + divider-shift = <0x0>; + clock-output-names = "sbapbclk"; + }; + + sdioclk: sdioclk@1f2ac000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2ac000 0x0 0x1000 + 0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg", "div-reg"; + csr-offset = <0x0>; + csr-mask = <0x2>; + enable-offset = <0x8>; + enable-mask = <0x2>; + divider-offset = <0x178>; + divider-width = <0x8>; + divider-shift = <0x0>; + clock-output-names = "sdioclk"; + }; + pcie0clk: pcie0clk@1f2bc000 { compatible = "apm,xgene-device-clock"; #clock-cells = <1>; @@ -149,6 +290,15 @@ clock-output-names = "pcie0clk"; }; + pcie1clk: pcie1clk@1f2cc000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2cc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie1clk"; + }; + xge0clk: xge0clk@1f61c000 { compatible = "apm,xgene-device-clock"; #clock-cells = <1>; @@ -170,6 +320,32 @@ csr-mask = <0x3>; clock-output-names = "xge1clk"; }; + + rngpkaclk: rngpkaclk@17000000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg"; + csr-offset = <0xc>; + csr-mask = <0x10>; + enable-offset = <0x10>; + enable-mask = <0x10>; + clock-output-names = "rngpkaclk"; + }; + + i2c4clk: i2c4clk@1704c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&sbapbclk 0>; + reg = <0x0 0x1704c000 0x0 0x1000>; + reg-names = "csr-reg"; + csr-offset = <0x0>; + csr-mask = <0x40>; + enable-offset = <0x8>; + enable-mask = <0x40>; + clock-output-names = "i2c4clk"; + }; }; scu: system-clk-controller@17000000 { @@ -184,6 +360,99 @@ mask = <0x1>; }; + csw: csw@7e200000 { + compatible = "apm,xgene-csw", "syscon"; + reg = <0x0 0x7e200000 0x0 0x1000>; + }; + + mcba: mcba@7e700000 { + compatible = "apm,xgene-mcb", "syscon"; + reg = <0x0 0x7e700000 0x0 0x1000>; + }; + + mcbb: mcbb@7e720000 { + compatible = "apm,xgene-mcb", "syscon"; + reg = <0x0 0x7e720000 0x0 0x1000>; + }; + + efuse: efuse@1054a000 { + compatible = "apm,xgene-efuse", "syscon"; + reg = <0x0 0x1054a000 0x0 0x20>; + }; + + edac@78800000 { + compatible = "apm,xgene-edac"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + regmap-csw = <&csw>; + regmap-mcba = <&mcba>; + regmap-mcbb = <&mcbb>; + regmap-efuse = <&efuse>; + reg = <0x0 0x78800000 0x0 0x100>; + interrupts = <0x0 0x20 0x4>, + <0x0 0x21 0x4>, + <0x0 0x27 0x4>; + + edacmc@7e800000 { + compatible = "apm,xgene-edac-mc"; + reg = <0x0 0x7e800000 0x0 0x1000>; + memory-controller = <0>; + }; + + edacmc@7e840000 { + compatible = "apm,xgene-edac-mc"; + reg = <0x0 0x7e840000 0x0 0x1000>; + memory-controller = <1>; + }; + + edacmc@7e880000 { + compatible = "apm,xgene-edac-mc"; + reg = <0x0 0x7e880000 0x0 0x1000>; + memory-controller = <2>; + }; + + edacmc@7e8c0000 { + compatible = "apm,xgene-edac-mc"; + reg = <0x0 0x7e8c0000 0x0 0x1000>; + memory-controller = <3>; + }; + + edacpmd@7c000000 { + compatible = "apm,xgene-edac-pmd"; + reg = <0x0 0x7c000000 0x0 0x200000>; + pmd-controller = <0>; + }; + + edacpmd@7c200000 { + compatible = "apm,xgene-edac-pmd"; + reg = <0x0 0x7c200000 0x0 0x200000>; + pmd-controller = <1>; + }; + + edacpmd@7c400000 { + compatible = "apm,xgene-edac-pmd"; + reg = <0x0 0x7c400000 0x0 0x200000>; + pmd-controller = <2>; + }; + + edacpmd@7c600000 { + compatible = "apm,xgene-edac-pmd"; + reg = <0x0 0x7c600000 0x0 0x200000>; + pmd-controller = <3>; + }; + + edacl3@7e600000 { + compatible = "apm,xgene-edac-l3-v2"; + reg = <0x0 0x7e600000 0x0 0x1000>; + }; + + edacsoc@7e930000 { + compatible = "apm,xgene-edac-soc"; + reg = <0x0 0x7e930000 0x0 0x1000>; + }; + }; + serial0: serial@10600000 { device_type = "serial"; compatible = "ns16550"; @@ -194,6 +463,66 @@ interrupts = <0x0 0x4c 0x4>; }; + /* Do not change dwusb name, coded for backward compatibility */ + usb0: dwusb@19000000 { + status = "disabled"; + compatible = "snps,dwc3"; + reg = <0x0 0x19000000 0x0 0x100000>; + interrupts = <0x0 0x5d 0x4>; + dma-coherent; + dr_mode = "host"; + }; + + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-pcie", "apm,xgene2-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xc0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xc0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x20000000 0xc1 0x20000000 0x00 0x20000000 /* mem */ + 0x43000000 0xe0 0x00000000 0xe0 0x00000000 0x20 0x00000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + msi-parent = <&v2m0>; + }; + + pcie1: pcie@1f2c0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-pcie", "apm,xgene2-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */ + 0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xa0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x20000000 0xa1 0x20000000 0x00 0x20000000 /* mem */ + 0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x1>; + dma-coherent; + clocks = <&pcie1clk 0>; + msi-parent = <&v2m0>; + }; + sata1: sata@1a000000 { compatible = "apm,xgene-ahci"; reg = <0x0 0x1a000000 0x0 0x1000>, @@ -224,7 +553,39 @@ dma-coherent; }; - sbgpio: sbgpio@17001000{ + mmc0: mmc@1c000000 { + compatible = "arasan,sdhci-4.9a"; + reg = <0x0 0x1c000000 0x0 0x100>; + interrupts = <0x0 0x49 0x4>; + dma-coherent; + no-1-8-v; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&sdioclk 0>, <&ahbclk 0>; + }; + + gfcgpio: gpio@1f63c000 { + compatible = "apm,xgene-gpio"; + reg = <0x0 0x1f63c000 0x0 0x40>; + gpio-controller; + #gpio-cells = <2>; + }; + + dwgpio: gpio@1c024000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0 0x1c024000 0x0 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + + sbgpio: gpio@17001000{ compatible = "apm,xgene-gpio-sb"; reg = <0x0 0x17001000 0x0 0x400>; #gpio-cells = <2>; @@ -267,5 +628,33 @@ local-mac-address = [00 01 73 00 00 02]; phy-connection-type = "xgmii"; }; + + rng: rng@10520000 { + compatible = "apm,xgene-rng"; + reg = <0x0 0x10520000 0x0 0x100>; + interrupts = <0x0 0x41 0x4>; + clocks = <&rngpkaclk 0>; + }; + + i2c1: i2c@10511000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x0 0x10511000 0x0 0x1000>; + interrupts = <0 0x45 0x4>; + #clock-cells = <1>; + clocks = <&sbapbclk 0>; + bus_num = <1>; + }; + + i2c4: i2c@10640000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x0 0x10640000 0x0 0x1000>; + interrupts = <0 0x3A 0x4>; + clocks = <&i2c4clk 0>; + bus_num = <4>; + }; }; }; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index 6c5ed119934f..fe30f7671ea3 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -25,6 +25,7 @@ reg = <0x0 0x000>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_0>; }; cpu@001 { device_type = "cpu"; @@ -32,6 +33,7 @@ reg = <0x0 0x001>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_0>; }; cpu@100 { device_type = "cpu"; @@ -39,6 +41,7 @@ reg = <0x0 0x100>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_1>; }; cpu@101 { device_type = "cpu"; @@ -46,6 +49,7 @@ reg = <0x0 0x101>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_1>; }; cpu@200 { device_type = "cpu"; @@ -53,6 +57,7 @@ reg = <0x0 0x200>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_2>; }; cpu@201 { device_type = "cpu"; @@ -60,6 +65,7 @@ reg = <0x0 0x201>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_2>; }; cpu@300 { device_type = "cpu"; @@ -67,6 +73,7 @@ reg = <0x0 0x300>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_3>; }; cpu@301 { device_type = "cpu"; @@ -74,6 +81,19 @@ reg = <0x0 0x301>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; + next-level-cache = <&xgene_L2_3>; + }; + xgene_L2_0: l2-cache-0 { + compatible = "cache"; + }; + xgene_L2_1: l2-cache-1 { + compatible = "cache"; + }; + xgene_L2_2: l2-cache-2 { + compatible = "cache"; + }; + xgene_L2_3: l2-cache-3 { + compatible = "cache"; }; }; @@ -150,6 +170,35 @@ clock-output-names = "socplldiv2"; }; + ahbclk: ahbclk@17000000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x17000000 0x0 0x2000>; + reg-names = "div-reg"; + divider-offset = <0x164>; + divider-width = <0x5>; + divider-shift = <0x0>; + clock-output-names = "ahbclk"; + }; + + sdioclk: sdioclk@1f2ac000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2ac000 0x0 0x1000 + 0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg", "div-reg"; + csr-offset = <0x0>; + csr-mask = <0x2>; + enable-offset = <0x8>; + enable-mask = <0x2>; + divider-offset = <0x178>; + divider-width = <0x8>; + divider-shift = <0x0>; + clock-output-names = "sdioclk"; + }; + qmlclk: qmlclk { compatible = "apm,xgene-device-clock"; #clock-cells = <1>; @@ -686,6 +735,50 @@ interrupts = <0x0 0x4f 0x4>; }; + mmc0: mmc@1c000000 { + compatible = "arasan,sdhci-4.9a"; + reg = <0x0 0x1c000000 0x0 0x100>; + interrupts = <0x0 0x49 0x4>; + dma-coherent; + no-1-8-v; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&sdioclk 0>, <&ahbclk 0>; + }; + + gfcgpio: gpio0@1701c000 { + compatible = "apm,xgene-gpio"; + reg = <0x0 0x1701c000 0x0 0x40>; + gpio-controller; + #gpio-cells = <2>; + }; + + dwgpio: gpio@1c024000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0 0x1c024000 0x0 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + + i2c0: i2c@10512000 { + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x0 0x10512000 0x0 0x1000>; + interrupts = <0 0x44 0x4>; + #clock-cells = <1>; + clocks = <&ahbclk 0>; + bus_num = <0>; + }; + phy1: phy@1f21a000 { compatible = "apm,xgene-phy"; reg = <0x0 0x1f21a000 0x0 0x100>; @@ -760,7 +853,26 @@ phy-names = "sata-phy"; }; - sbgpio: sbgpio@17001000{ + /* Do not change dwusb name, coded for backward compatibility */ + usb0: dwusb@19000000 { + status = "disabled"; + compatible = "snps,dwc3"; + reg = <0x0 0x19000000 0x0 0x100000>; + interrupts = <0x0 0x89 0x4>; + dma-coherent; + dr_mode = "host"; + }; + + usb1: dwusb@19800000 { + status = "disabled"; + compatible = "snps,dwc3"; + reg = <0x0 0x19800000 0x0 0x100000>; + interrupts = <0x0 0x8a 0x4>; + dma-coherent; + dr_mode = "host"; + }; + + sbgpio: gpio@17001000{ compatible = "apm,xgene-gpio-sb"; reg = <0x0 0x17001000 0x0 0x400>; #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 93bc3d7d51c0..8826f834f54f 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -60,6 +60,28 @@ }; }; + idle-states { + entry-method = "arm,psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2500>; + }; + }; + A57_0: cpu@0 { compatible = "arm,cortex-a57","arm,armv8"; reg = <0x0 0x0>; @@ -67,6 +89,7 @@ enable-method = "psci"; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A57_1: cpu@1 { @@ -76,6 +99,7 @@ enable-method = "psci"; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_0: cpu@100 { @@ -85,6 +109,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_1: cpu@101 { @@ -94,6 +119,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_2: cpu@102 { @@ -103,6 +129,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_3: cpu@103 { @@ -112,6 +139,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A57_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index 53442b5ee4ff..dcfcf15a17f5 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -60,6 +60,28 @@ }; }; + idle-states { + entry-method = "arm,psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2500>; + }; + }; + A57_0: cpu@0 { compatible = "arm,cortex-a57","arm,armv8"; reg = <0x0 0x0>; @@ -67,6 +89,7 @@ enable-method = "psci"; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A57_1: cpu@1 { @@ -76,6 +99,7 @@ enable-method = "psci"; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_0: cpu@100 { @@ -85,6 +109,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_1: cpu@101 { @@ -94,6 +119,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_2: cpu@102 { @@ -103,6 +129,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_3: cpu@103 { @@ -112,6 +139,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A57_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts index 244baf879dc9..6bb3d4d9efa9 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -50,10 +50,28 @@ device_type = "memory"; reg = <0x000000000 0x80000000 0x00000000 0x40000000>; }; +}; + +&i2c0 { + status = "ok"; +}; + +&i2c1 { + status = "ok"; +}; + +&uart3 { + status = "ok"; +}; - soc: soc { - uart3: serial@66130000 { - status = "ok"; - }; +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + #address-cells = <1>; + #size-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index 3c92d92278e5..a510d3a8e647 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -31,6 +31,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/bcm-ns2.h> /memreserve/ 0x84b00000 0x00000008; @@ -44,36 +45,44 @@ #address-cells = <2>; #size-cells = <0>; - cpu@0 { + A57_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 0>; enable-method = "spin-table"; cpu-release-addr = <0 0x84b00000>; + next-level-cache = <&CLUSTER0_L2>; }; - cpu@1 { + A57_1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 1>; enable-method = "spin-table"; cpu-release-addr = <0 0x84b00000>; + next-level-cache = <&CLUSTER0_L2>; }; - cpu@2 { + A57_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 2>; enable-method = "spin-table"; cpu-release-addr = <0 0x84b00000>; + next-level-cache = <&CLUSTER0_L2>; }; - cpu@3 { + A57_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 3>; enable-method = "spin-table"; cpu-release-addr = <0 0x84b00000>; + next-level-cache = <&CLUSTER0_L2>; + }; + + CLUSTER0_L2: l2-cache@000 { + compatible = "cache"; }; }; @@ -89,12 +98,154 @@ IRQ_TYPE_EDGE_RISING)>; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A57_0>, + <&A57_1>, + <&A57_2>, + <&A57_3>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + iprocmed: iprocmed { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; + clock-div = <2>; + clock-mult = <1>; + }; + + iprocslow: iprocslow { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + smmu: mmu@64000000 { + compatible = "arm,mmu-500"; + reg = <0x64000000 0x40000>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + mmu-masters; + }; + + lcpll_ddr: lcpll_ddr@6501d058 { + #clock-cells = <1>; + compatible = "brcm,ns2-lcpll-ddr"; + reg = <0x6501d058 0x20>, + <0x6501c020 0x4>, + <0x6501d04c 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll_ddr", "pcie_sata_usb", + "ddr", "ddr_ch2_unused", + "ddr_ch3_unused", "ddr_ch4_unused", + "ddr_ch5_unused"; + }; + + lcpll_ports: lcpll_ports@6501d078 { + #clock-cells = <1>; + compatible = "brcm,ns2-lcpll-ports"; + reg = <0x6501d078 0x20>, + <0x6501c020 0x4>, + <0x6501d054 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll_ports", "wan", "rgmii", + "ports_ch2_unused", + "ports_ch3_unused", + "ports_ch4_unused", + "ports_ch5_unused"; + }; + + genpll_scr: genpll_scr@6501d098 { + #clock-cells = <1>; + compatible = "brcm,ns2-genpll-scr"; + reg = <0x6501d098 0x32>, + <0x6501c020 0x4>, + <0x6501d044 0x4>; + clocks = <&osc>; + clock-output-names = "genpll_scr", "scr", "fs", + "audio_ref", "scr_ch3_unused", + "scr_ch4_unused", "scr_ch5_unused"; + }; + + genpll_sw: genpll_sw@6501d0c4 { + #clock-cells = <1>; + compatible = "brcm,ns2-genpll-sw"; + reg = <0x6501d0c4 0x32>, + <0x6501c020 0x4>, + <0x6501d044 0x4>; + clocks = <&osc>; + clock-output-names = "genpll_sw", "rpe", "250", "nic", + "chimp", "port", "sdio"; + }; + + crmu: crmu@65024000 { + compatible = "syscon"; + reg = <0x65024000 0x100>; + }; + + reboot@65024000 { + compatible ="syscon-reboot"; + regmap = <&crmu>; + offset = <0x90>; + mask = <0xfffffffd>; + }; + gic: interrupt-controller@65210000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -105,14 +256,53 @@ <0x65260000 0x1000>; }; + i2c0: i2c@66080000 { + compatible = "brcm,iproc-i2c"; + reg = <0x66080000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@660b0000 { + compatible = "brcm,iproc-i2c"; + reg = <0x660b0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; + uart3: serial@66130000 { compatible = "snps,dw-apb-uart"; reg = <0x66130000 0x100>; interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clock-frequency = <23961600>; + clocks = <&osc>; status = "disabled"; }; + + hwrng: hwrng@66220000 { + compatible = "brcm,iproc-rng200"; + reg = <0x66220000 0x28>; + }; + + nand: nand@66460000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x66460000 0x600>, + <0x67015408 0x600>, + <0x66460f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 5424cc450f72..d8767b00862e 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos7.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Samsung Exynos7 Espresso board based on EXYNOS7"; @@ -52,11 +53,288 @@ status = "okay"; }; +&hsi2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <200000>; + status = "okay"; + + s2mps15_pmic@66 { + compatible = "samsung,s2mps15-pmic"; + reg = <0x66>; + interrupts = <2 IRQ_TYPE_NONE>; + interrupt-parent = <&gpa0>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq>; + wakeup-source; + + s2mps15_osc: clocks { + compatible = "samsung,s2mps13-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps13_ap", "s2mps13_cp", + "s2mps13_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-enable-ramp-delay = <125>; + }; + + ldo2_reg: LDO2 { + regulator-name = "vqmmc-sdcard"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-enable-ramp-delay = <125>; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <125>; + }; + + ldo4_reg: LDO4 { + regulator-name = "vdd_ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1110000>; + regulator-always-on; + regulator-enable-ramp-delay = <125>; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-always-on; + regulator-enable-ramp-delay = <125>; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <2250000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1150000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1000000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1000000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1000000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-enable-ramp-delay = <125>; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-enable-ramp-delay = <125>; + }; + + ldo14_reg: LDO14 { + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3375000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo17_reg: LDO17 { + regulator-name = "vmmc-sdcard"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3375000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo18_reg: LDO18 { + regulator-name = "vdd_ldo18"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2275000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_ldo19"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3375000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo21_reg: LDO21 { + regulator-name = "vdd_ldo21"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3375000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo23_reg: LDO23 { + regulator-name = "vdd_ldo23"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2275000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo25_reg: LDO25 { + regulator-name = "vdd_ldo25"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3375000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo26_reg: LDO26 { + regulator-name = "vdd_ldo26"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1470000>; + regulator-enable-ramp-delay = <125>; + }; + + ldo27_reg: LDO27 { + regulator-name = "vdd_ldo27"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2275000>; + regulator-enable-ramp-delay = <125>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <25000>; + regulator-enable-ramp-delay = <250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_atlas"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <250>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <250>; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_buck5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <25000>; + regulator-enable-ramp-delay = <250>; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <250>; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_buck7"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-ramp-delay = <25000>; + regulator-enable-ramp-delay = <250>; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_buck8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-ramp-delay = <25000>; + regulator-enable-ramp-delay = <250>; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_buck9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + regulator-always-on; + regulator-ramp-delay = <25000>; + regulator-enable-ramp-delay = <250>; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_buck10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-ramp-delay = <25000>; + regulator-enable-ramp-delay = <250>; + }; + }; + }; +}; + +&pinctrl_alive { + pmic_irq: pmic-irq { + samsung,pins = "gpa0-2"; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; +}; + &mmc_0 { status = "okay"; num-slots = <1>; - broken-cd; cap-mmc-highspeed; + mmc-hs200-1_8v; non-removable; card-detect-delay = <200>; clock-frequency = <800000000>; @@ -80,5 +358,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; bus-width = <4>; + vmmc-supply = <&ldo17_reg>; + vqmmc-supply = <&ldo2_reg>; disable-wp; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index f9c5a549c2c0..93108f1a90f9 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -454,6 +454,13 @@ reg = <0x105c0000 0x5000>; }; + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; + mask = <0x1>; + }; + rtc: rtc@10590000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10590000 0x100>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index c4957a4aa5aa..f3c25165dad3 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,6 +1,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts new file mode 100644 index 000000000000..ce235577e90f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -0,0 +1,116 @@ +/* + * Device Tree Include file for Freescale Layerscape-1043A family SoC. + * + * Copyright 2014-2015, Freescale Semiconductor + * + * Mingkai Hu <Mingkai.hu@freescale.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "fsl-ls1043a.dtsi" + +/ { + model = "LS1043A RDB Board"; +}; + +&i2c0 { + status = "okay"; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + adt7461a@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + eeprom@52 { + compatible = "at24,24c512"; + reg = <0x52>; + }; + eeprom@53 { + compatible = "at24,24c512"; + reg = <0x53>; + }; + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; +}; + +&ifc { + status = "okay"; + #address-cells = <2>; + #size-cells = <1>; + /* NOR, NAND Flashes and FPGA on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000 + 0x1 0x0 0x0 0x7e800000 0x00010000 + 0x2 0x0 0x0 0x7fb00000 0x00000100>; + + nor@0,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + compatible = "fsl,ifc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1 0x0 0x10000>; + }; + + cpld: board-control@2,0 { + compatible = "fsl,ls1043ardb-cpld"; + reg = <0x2 0x0 0x0000100>; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi new file mode 100644 index 000000000000..42a61549afd4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -0,0 +1,527 @@ +/* + * Device Tree Include file for Freescale Layerscape-1043A family SoC. + * + * Copyright 2014-2015, Freescale Semiconductor + * + * Mingkai Hu <Mingkai.hu@freescale.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "fsl,ls1043a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* + * We expect the enable-method for cpu's to be "psci", but this + * is dependent on the SoC FW, which will fill this in. + * + * Currently supported enable-method is psci v0.2 + */ + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + clocks = <&clockgen 1 0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + clocks = <&clockgen 1 0>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + clocks = <&clockgen 1 0>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + clocks = <&clockgen 1 0>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0 0x80000000>; + /* DRAM space 1, size: 2GiB DRAM */ + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + reboot { + compatible ="syscon-reboot"; + regmap = <&dcfg>; + offset = <0xb0>; + mask = <0x02>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0x1>, /* Physical Secure PPI */ + <1 14 0x1>, /* Physical Non-Secure PPI */ + <1 11 0x1>, /* Virtual PPI */ + <1 10 0x1>; /* Hypervisor PPI */ + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 106 0x4>, + <0 107 0x4>, + <0 95 0x4>, + <0 97 0x4>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + gic: interrupt-controller@1400000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x1401000 0 0x1000>, /* GICD */ + <0x0 0x1402000 0 0x2000>, /* GICC */ + <0x0 0x1404000 0 0x2000>, /* GICH */ + <0x0 0x1406000 0 0x2000>; /* GICV */ + interrupts = <1 9 0xf08>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clockgen: clocking@1ee1000 { + compatible = "fsl,ls1043a-clockgen"; + reg = <0x0 0x1ee1000 0x0 0x1000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + scfg: scfg@1570000 { + compatible = "fsl,ls1043a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; + }; + + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1043a-dcfg", "syscon"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + big-endian; + }; + + ifc: ifc@1530000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x1530000 0x0 0x10000>; + interrupts = <0 43 0x4>; + }; + + esdhc: esdhc@1560000 { + compatible = "fsl,ls1043a-esdhc", "fsl,esdhc"; + reg = <0x0 0x1560000 0x0 0x10000>; + interrupts = <0 62 0x4>; + clock-frequency = <0>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + big-endian; + bus-width = <4>; + }; + + dspi0: dspi@2100000 { + compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 64 0x4>; + clock-names = "dspi"; + clocks = <&clockgen 4 0>; + spi-num-chipselects = <5>; + big-endian; + status = "disabled"; + }; + + dspi1: dspi@2110000 { + compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2110000 0x0 0x10000>; + interrupts = <0 65 0x4>; + clock-names = "dspi"; + clocks = <&clockgen 4 0>; + spi-num-chipselects = <5>; + big-endian; + status = "disabled"; + }; + + i2c0: i2c@2180000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <0 56 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + dmas = <&edma0 1 39>, + <&edma0 1 38>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c1: i2c@2190000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <0 57 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c2: i2c@21a0000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21a0000 0x0 0x10000>; + interrupts = <0 58 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c3: i2c@21b0000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21b0000 0x0 0x10000>; + interrupts = <0 59 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0500 0x0 0x100>; + interrupts = <0 54 0x4>; + clocks = <&clockgen 4 0>; + }; + + duart1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0600 0x0 0x100>; + interrupts = <0 54 0x4>; + clocks = <&clockgen 4 0>; + }; + + duart2: serial@21d0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0500 0x0 0x100>; + interrupts = <0 55 0x4>; + clocks = <&clockgen 4 0>; + }; + + duart3: serial@21d0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0600 0x0 0x100>; + interrupts = <0 55 0x4>; + clocks = <&clockgen 4 0>; + }; + + gpio1: gpio@2300000 { + compatible = "fsl,ls1043a-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <0 66 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2310000 { + compatible = "fsl,ls1043a-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <0 67 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2320000 { + compatible = "fsl,ls1043a-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <0 68 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@2330000 { + compatible = "fsl,ls1043a-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <0 134 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lpuart0: serial@2950000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2950000 0x0 0x1000>; + interrupts = <0 48 0x4>; + clocks = <&clockgen 0 0>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart1: serial@2960000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2960000 0x0 0x1000>; + interrupts = <0 49 0x4>; + clocks = <&clockgen 4 0>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart2: serial@2970000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2970000 0x0 0x1000>; + interrupts = <0 50 0x4>; + clocks = <&clockgen 4 0>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart3: serial@2980000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2980000 0x0 0x1000>; + interrupts = <0 51 0x4>; + clocks = <&clockgen 4 0>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart4: serial@2990000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2990000 0x0 0x1000>; + interrupts = <0 52 0x4>; + clocks = <&clockgen 4 0>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart5: serial@29a0000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x29a0000 0x0 0x1000>; + interrupts = <0 53 0x4>; + clocks = <&clockgen 4 0>; + clock-names = "ipg"; + status = "disabled"; + }; + + wdog0: wdog@2ad0000 { + compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt"; + reg = <0x0 0x2ad0000 0x0 0x10000>; + interrupts = <0 83 0x4>; + clocks = <&clockgen 4 0>; + clock-names = "wdog"; + big-endian; + }; + + edma0: edma@2c00000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x2c00000 0x0 0x10000>, + <0x0 0x2c10000 0x0 0x10000>, + <0x0 0x2c20000 0x0 0x10000>; + interrupts = <0 103 0x4>, + <0 103 0x4>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + big-endian; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen 4 0>, + <&clockgen 4 0>; + }; + + usb0: usb3@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <0 60 0x4>; + dr_mode = "host"; + }; + + usb1: usb3@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <0 61 0x4>; + dr_mode = "host"; + }; + + usb2: usb3@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 63 0x4>; + dr_mode = "host"; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1043a-ahci", "fsl,ls1021a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 69 0x4>; + clocks = <&clockgen 4 0>; + }; + + msi1: msi-controller1@1571000 { + compatible = "fsl,1s1043a-msi"; + reg = <0x0 0x1571000 0x0 0x8>; + msi-controller; + interrupts = <0 116 0x4>; + }; + + msi2: msi-controller2@1572000 { + compatible = "fsl,1s1043a-msi"; + reg = <0x0 0x1572000 0x0 0x8>; + msi-controller; + interrupts = <0 126 0x4>; + }; + + msi3: msi-controller3@1573000 { + compatible = "fsl,1s1043a-msi"; + reg = <0x0 0x1573000 0x0 0x8>; + msi-controller; + interrupts = <0 160 0x4>; + }; + + pcie@3400000 { + compatible = "fsl,ls1043a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 118 0x4>, /* controller interrupt */ + <0 117 0x4>; /* PME interrupt */ + interrupt-names = "intr", "pme"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&msi1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 110 0x4>, + <0000 0 0 2 &gic 0 111 0x4>, + <0000 0 0 3 &gic 0 112 0x4>, + <0000 0 0 4 &gic 0 113 0x4>; + }; + + pcie@3500000 { + compatible = "fsl,ls1043a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 128 0x4>, + <0 127 0x4>; + interrupt-names = "intr", "pme"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <2>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&msi2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 120 0x4>, + <0000 0 0 2 &gic 0 121 0x4>, + <0000 0 0 3 &gic 0 122 0x4>, + <0000 0 0 4 &gic 0 123 0x4>; + }; + + pcie@3600000 { + compatible = "fsl,ls1043a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 162 0x4>, + <0 161 0x4>; + interrupt-names = "intr", "pme"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <2>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&msi3>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 154 0x4>, + <0000 0 0 2 &gic 0 155 0x4>, + <0000 0 0 3 &gic 0 156 0x4>, + <0000 0 0 4 &gic 0 157 0x4>; + }; + }; + +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 925552e7b4f3..2b23d0360683 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -153,6 +153,18 @@ }; }; + rstcr: syscon@1e60000 { + compatible = "fsl,ls2080a-rstcr", "syscon"; + reg = <0x0 0x1e60000 0x0 0x4>; + }; + + reboot { + compatible ="syscon-reboot"; + regmap = <&rstcr>; + offset = <0x0>; + mask = <0x2>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ @@ -193,6 +205,62 @@ interrupts = <0 32 0x4>; /* Level high type */ }; + cluster1_core0_watchdog: wdt@c000000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core1_watchdog: wdt@c010000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core0_watchdog: wdt@c100000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc100000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core1_watchdog: wdt@c110000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc110000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster3_core0_watchdog: wdt@c200000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc200000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster3_core1_watchdog: wdt@c210000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc210000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster4_core0_watchdog: wdt@c300000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc300000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster4_core1_watchdog: wdt@c310000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc310000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 8d43a0fce522..818525197508 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -32,3 +32,10 @@ reg = <0x0 0x0 0x0 0x40000000>; }; }; + +&uart2 { + label = "LS-UART0"; +}; +&uart3 { + label = "LS-UART1"; +}; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi index a3b5f1d4a240..099ad93bb49b 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi @@ -55,7 +55,7 @@ }; psci { - compatible = "arm,psci-0.2"; + compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; }; @@ -68,6 +68,7 @@ device_type = "cpu"; reg = <0x0>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; cpu1: cpu@1 { @@ -75,6 +76,7 @@ device_type = "cpu"; reg = <0x1>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; cpu2: cpu@2 { @@ -82,6 +84,7 @@ device_type = "cpu"; reg = <0x2>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; cpu3: cpu@3 { @@ -89,6 +92,19 @@ device_type = "cpu"; reg = <0x3>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + idle-states { + entry-method = "psci"; + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <75>; + exit-latency-us = <155>; + min-residency-us = <1000>; + }; }; }; @@ -225,6 +241,16 @@ }; }; + soc_pinctrl: pin-controller@ea8000 { + compatible = "marvell,berlin4ct-soc-pinctrl"; + reg = <0xea8000 0x14>; + }; + + avio_pinctrl: pin-controller@ea8400 { + compatible = "marvell,berlin4ct-avio-pinctrl"; + reg = <0xea8400 0x8>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -241,6 +267,29 @@ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; }; + wdt0: watchdog@3000 { + compatible = "snps,dw-wdt"; + reg = <0x3000 0x100>; + clocks = <&osc>; + interrupts = <0>; + }; + + wdt1: watchdog@4000 { + compatible = "snps,dw-wdt"; + reg = <0x4000 0x100>; + clocks = <&osc>; + interrupts = <1>; + status = "disabled"; + }; + + wdt2: watchdog@5000 { + compatible = "snps,dw-wdt"; + reg = <0x5000 0x100>; + clocks = <&osc>; + interrupts = <2>; + status = "disabled"; + }; + sm_gpio0: gpio@8000 { compatible = "snps,dw-apb-gpio"; reg = <0x8000 0x400>; @@ -278,6 +327,18 @@ clocks = <&osc>; reg-shift = <2>; status = "disabled"; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; + }; + }; + + system_pinctrl: pin-controller@fe2200 { + compatible = "marvell,berlin4ct-system-pinctrl"; + reg = <0xfe2200 0xc>; + + uart0_pmux: uart0-pmux { + groups = "SM_URT0_TXD", "SM_URT0_RXD"; + function = "uart0"; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 9b1482a1d007..e427f04a9f45 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -102,6 +102,13 @@ }; &pio { + disp_pwm0_pins: disp_pwm0_pins { + pins1 { + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; + output-low; + }; + }; + mmc0_pins_default: mmc0default { pins_cmd_dat { pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, @@ -200,6 +207,12 @@ }; }; +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&disp_pwm0_pins>; + status = "okay"; +}; + &pwrap { pmic: mt6397 { compatible = "mediatek,mt6397"; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 424a4939c1b4..ec135eae31f5 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -96,7 +96,7 @@ }; psci { - compatible = "arm,psci"; + compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci"; method = "smc"; cpu_suspend = <0x84000001>; cpu_off = <0x84000002>; @@ -248,6 +248,15 @@ reg = <0 0x10007000 0 0x100>; }; + timer: timer@10008000 { + compatible = "mediatek,mt8173-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10008000 0 0x1000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_CLK_13M>, + <&topckgen CLK_TOP_RTC_SEL>; + }; + pwrap: pwrap@1000d000 { compatible = "mediatek,mt8173-pwrap"; reg = <0 0x1000d000 0 0x1000>; @@ -558,6 +567,28 @@ #clock-cells = <1>; }; + pwm0: pwm@1401e000 { + compatible = "mediatek,mt8173-disp-pwm", + "mediatek,mt6595-disp-pwm"; + reg = <0 0x1401e000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys CLK_MM_DISP_PWM026M>, + <&mmsys CLK_MM_DISP_PWM0MM>; + clock-names = "main", "mm"; + status = "disabled"; + }; + + pwm1: pwm@1401f000 { + compatible = "mediatek,mt8173-disp-pwm", + "mediatek,mt6595-disp-pwm"; + reg = <0 0x1401f000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys CLK_MM_DISP_PWM126M>, + <&mmsys CLK_MM_DISP_PWM1MM>; + clock-names = "main", "mm"; + status = "disabled"; + }; + imgsys: clock-controller@15000000 { compatible = "mediatek,mt8173-imgsys", "syscon"; reg = <0 0x15000000 0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 6b8abbe68746..db17c5d5689c 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -20,6 +20,10 @@ aliases { serial0 = &blsp1_uart2; serial1 = &blsp1_uart1; + usid0 = &pm8916_0; + i2c0 = &blsp_i2c2; + i2c1 = &blsp_i2c6; + i2c3 = &blsp_i2c4; }; chosen { @@ -27,7 +31,16 @@ }; soc { + serial@78af000 { + label = "LS-UART0"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + }; + serial@78b0000 { + label = "LS-UART1"; status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_uart2_default>; @@ -36,26 +49,31 @@ i2c@78b6000 { /* On Low speed expansion */ + label = "LS-I2C0"; status = "okay"; }; i2c@78b8000 { /* On High speed expansion */ + label = "HS-I2C2"; status = "okay"; }; i2c@78ba000 { /* On Low speed expansion */ + label = "LS-I2C1"; status = "okay"; }; spi@78b7000 { /* On High speed expansion */ + label = "HS-SPI1"; status = "okay"; }; spi@78b9000 { /* On Low speed expansion */ + label = "LS-SPI0"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts index fced77f0fd3a..b0a064d3806b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -17,6 +17,6 @@ / { model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; - compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360", + compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916", "qcom,mtp"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi index a1aa0b201e92..ceeb8a6feed6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi @@ -17,6 +17,7 @@ / { aliases { serial0 = &blsp1_uart2; + usid0 = &pm8916_0; }; chosen { diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 49ec55a37614..955c6f174d4c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -16,10 +16,13 @@ blsp1_uart1_default: blsp1_uart1_default { pinmux { function = "blsp_uart1"; - pins = "gpio0", "gpio1"; + // TX, RX, CTS_N, RTS_N + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; }; pinconf { - pins = "gpio0", "gpio1"; + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; drive-strength = <16>; bias-disable; }; @@ -28,10 +31,12 @@ blsp1_uart1_sleep: blsp1_uart1_sleep { pinmux { function = "gpio"; - pins = "gpio0", "gpio1"; + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; }; pinconf { - pins = "gpio0", "gpio1"; + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; drive-strength = <2>; bias-pull-down; }; @@ -272,7 +277,7 @@ }; pinconf { pins = "gpio6", "gpio7"; - drive-strength = <2>; + drive-strength = <16>; bias-disable = <0>; }; }; @@ -296,7 +301,7 @@ }; pinconf { pins = "gpio14", "gpio15"; - drive-strength = <2>; + drive-strength = <16>; bias-disable = <0>; }; }; @@ -320,7 +325,7 @@ }; pinconf { pins = "gpio22", "gpio23"; - drive-strength = <2>; + drive-strength = <16>; bias-disable = <0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 8d184ff19642..915321479998 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -37,6 +37,22 @@ reg = <0 0 0 0>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + reserve_aligned@86000000 { + reg = <0x0 0x86000000 0x0 0x0300000>; + no-map; + }; + + smem_mem: smem_region@86300000 { + reg = <0x0 0x86300000 0x0 0x0100000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -74,6 +90,29 @@ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_mem>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -103,21 +142,46 @@ reg = <0x1800000 0x80000>; }; + tcsr_mutex_regs: syscon@1905000 { + compatible = "syscon"; + reg = <0x1905000 0x20000>; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + rpm_msg_ram: memory@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x60000 0x8000>; + }; + blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78af000 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 1>, <&blsp_dma 0>; + dma-names = "rx", "tx"; status = "disabled"; }; + apcs: syscon@b011000 { + compatible = "syscon"; + reg = <0x0b011000 0x1000>; + }; + blsp1_uart2: serial@78b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78b0000 0x200>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 3>, <&blsp_dma 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -438,6 +502,49 @@ clock-names = "core"; }; }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + pm8916-regulators { + compatible = "qcom,rpm-pm8916-regulators"; + + pm8916_s1: s1 {}; + pm8916_s2: s2 {}; + pm8916_s3: s3 {}; + pm8916_s4: s4 {}; + + pm8916_l1: l1 {}; + pm8916_l2: l2 {}; + pm8916_l3: l3 {}; + pm8916_l4: l4 {}; + pm8916_l5: l5 {}; + pm8916_l6: l6 {}; + pm8916_l7: l7 {}; + pm8916_l8: l8 {}; + pm8916_l9: l9 {}; + pm8916_l10: l10 {}; + pm8916_l11: l11 {}; + pm8916_l12: l12 {}; + pm8916_l13: l13 {}; + pm8916_l14: l14 {}; + pm8916_l15: l15 {}; + pm8916_l16: l16 {}; + pm8916_l17: l17 {}; + pm8916_l18: l18 {}; + }; + }; + }; + }; }; #include "msm8916-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index b222ece7e3d2..37432451ee4c 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -4,8 +4,8 @@ &spmi_bus { - usid0: pm8916@0 { - compatible = "qcom,spmi-pmic"; + pm8916_0: pm8916@0 { + compatible = "qcom,pm8916", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; @@ -90,7 +90,7 @@ }; }; - usid1: pm8916@1 { + pm8916_1: pm8916@1 { compatible = "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile new file mode 100644 index 000000000000..9ce1890a650e --- /dev/null +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -0,0 +1,4 @@ +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb + +always := $(dtb-y) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts new file mode 100644 index 000000000000..265d12ff6022 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -0,0 +1,251 @@ +/* + * Device Tree Source for the Salvator-X board + * + * Copyright (C) 2015 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* + * SSI-AK4613 + * + * This command is required when Playback/Capture + * + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + +/dts-v1/; +#include "r8a7795.dtsi" + +/ { + model = "Renesas Salvator-X board based on r8a7795"; + compatible = "renesas,salvator-x", "renesas,r8a7795"; + + aliases { + serial0 = &scif2; + serial1 = &scif1; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + x12_clk: x12_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + audio_clkout: audio_clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + rsnd_ak4613: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&pfc { + scif1_pins: scif1 { + renesas,groups = "scif1_data_a", "scif1_ctrl"; + renesas,function = "scif1"; + }; + scif2_pins: scif2 { + renesas,groups = "scif2_data_a"; + renesas,function = "scif2"; + }; + + i2c2_pins: i2c2 { + renesas,groups = "i2c2_a"; + renesas,function = "i2c2"; + }; + + avb_pins: avb { + renesas,groups = "avb_mdc"; + renesas,function = "avb"; + }; + + sound_pins: sound { + renesas,groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + renesas,function = "ssi"; + }; + + sound_clk_pins: sound_clk { + renesas,groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout3_a"; + renesas,function = "audio_clk"; + }; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + + clock-frequency = <100000>; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + }; + + cs2000: clk_multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600>; + + status = "okay"; + + /* update <audio_clk_b> to <cs2000> */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A7795_CLK_S0D4>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + shared-pin; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <900>; + rxdv-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txc-skew-ps = <900>; + txen-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi new file mode 100644 index 000000000000..bb353cde1253 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -0,0 +1,779 @@ +/* + * Device Tree Source for the r8a7795 SoC + * + * Copyright (C) 2015 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/clock/r8a7795-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "renesas,r8a7795"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x0>; + device_type = "cpu"; + enable-method = "psci"; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x1>; + device_type = "cpu"; + enable-method = "psci"; + }; + a57_2: cpu@2 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x2>; + device_type = "cpu"; + enable-method = "psci"; + }; + a57_3: cpu@3 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x3>; + device_type = "cpu"; + enable-method = "psci"; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@0xf1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&cpg>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&cpg>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&cpg>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&cpg>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&cpg>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&cpg>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&cpg>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&cpg>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, + <&a57_1>, + <&a57_2>, + <&a57_3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7795-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <0 350 IRQ_TYPE_LEVEL_HIGH + 0 320 IRQ_TYPE_LEVEL_HIGH + 0 321 IRQ_TYPE_LEVEL_HIGH + 0 322 IRQ_TYPE_LEVEL_HIGH + 0 323 IRQ_TYPE_LEVEL_HIGH + 0 324 IRQ_TYPE_LEVEL_HIGH + 0 325 IRQ_TYPE_LEVEL_HIGH + 0 326 IRQ_TYPE_LEVEL_HIGH + 0 327 IRQ_TYPE_LEVEL_HIGH + 0 328 IRQ_TYPE_LEVEL_HIGH + 0 329 IRQ_TYPE_LEVEL_HIGH + 0 330 IRQ_TYPE_LEVEL_HIGH + 0 331 IRQ_TYPE_LEVEL_HIGH + 0 332 IRQ_TYPE_LEVEL_HIGH + 0 333 IRQ_TYPE_LEVEL_HIGH + 0 334 IRQ_TYPE_LEVEL_HIGH + 0 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <0 351 IRQ_TYPE_LEVEL_HIGH + 0 336 IRQ_TYPE_LEVEL_HIGH + 0 337 IRQ_TYPE_LEVEL_HIGH + 0 338 IRQ_TYPE_LEVEL_HIGH + 0 339 IRQ_TYPE_LEVEL_HIGH + 0 340 IRQ_TYPE_LEVEL_HIGH + 0 341 IRQ_TYPE_LEVEL_HIGH + 0 342 IRQ_TYPE_LEVEL_HIGH + 0 343 IRQ_TYPE_LEVEL_HIGH + 0 344 IRQ_TYPE_LEVEL_HIGH + 0 345 IRQ_TYPE_LEVEL_HIGH + 0 346 IRQ_TYPE_LEVEL_HIGH + 0 347 IRQ_TYPE_LEVEL_HIGH + 0 348 IRQ_TYPE_LEVEL_HIGH + 0 349 IRQ_TYPE_LEVEL_HIGH + 0 382 IRQ_TYPE_LEVEL_HIGH + 0 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a7795"; + reg = <0 0xe6060000 0 0x50c>; + }; + + dmac0: dma-controller@e6700000 { + /* Empty node for now */ + }; + + dmac1: dma-controller@e7300000 { + /* Empty node for now */ + }; + + dmac2: dma-controller@e7310000 { + /* Empty node for now */ + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7795"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&cpg>; + phy-mode = "rgmii-id"; + #address-cells = <1>; + #size-cells = <0>; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + reg = <0 0xe6540000 0 96>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>; + clock-names = "sci_ick"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + reg = <0 0xe6550000 0 96>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>; + clock-names = "sci_ick"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + reg = <0 0xe6560000 0 96>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>; + clock-names = "sci_ick"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + reg = <0 0xe66a0000 0 96>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + reg = <0 0xe66b0000 0 96>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7795", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "sci_ick"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7795", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "sci_ick"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a7795", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>; + clock-names = "sci_ick"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a7795", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a7795", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "sci_ick"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a7795", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "sci_ick"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&cpg>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&cpg>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&cpg>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&cpg>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&cpg>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&cpg>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&cpg>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A7795_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&cpg>; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc@0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc@1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,src { + src0: src@0 { + interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src@1 { + interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src@2 { + interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src@3 { + interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src@4 { + interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src@5 { + interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src@6 { + interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src@7 { + interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src@8 { + interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src@9 { + interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi@0 { + interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi@1 { + interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi@2 { + interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi@3 { + interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi@4 { + interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi@5 { + interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi@6 { + interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi@7 { + interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi@8 { + interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi@9 { + interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + sata: sata@ee300000 { + compatible = "renesas,sata-r8a7795"; + reg = <0 0xee300000 0 0x1fff>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 601e6a236c1d..e3f0b5f4ba4e 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,3 +1,4 @@ +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts new file mode 100644 index 000000000000..8a5275f0539b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts @@ -0,0 +1,176 @@ +/* + * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3368-evb.dtsi" + +/ { + model = "Rockchip RK3368 EVB with ACT8846 pmic"; + compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368"; +}; + +&i2c0 { + clock-frequency = <400000>; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + status = "okay"; + + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + inl1-supply = <&vcc_io>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "VCC_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "VCCIO_SD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "VDD10_LCD"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcca_codec: REG7 { + regulator-name = "VCCA_CODEC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcca_tp: REG8 { + regulator-name = "VCCA_TP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccio_pmu: REG9 { + regulator-name = "VCCIO_PMU"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_10: REG10 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "VCC18_LCD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi new file mode 100644 index 000000000000..8c219ccf67a3 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -0,0 +1,281 @@ +/* + * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/pwm/pwm.h> +#include "rk3368.dtsi" + +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; + pwm-delay-us = <10000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + button@0 { + gpio-key,wakeup = <1>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <116>; + }; + }; + + /* supplies both host and otg */ + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_lan: vcc-lan-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + mmc-pwrseq = <&emmc_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&gmac { + phy-supply = <&vcc_lan>; + phy-mode = "rmii"; + clock_in_out = "output"; + snps,reset-gpio = <&gpio3 12 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&i2c0 { + status = "okay"; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + backlight { + bl_en: bl-en { + rockchip,pins = <0 20 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + emmc { + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc-clk { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + }; + + emmc-cmd { + rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc_reset: emmc-reset { + rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio { + wifi_reg_on: wifi-reg-on { + rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_rst: bt-rst { + rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index 401a81231eb9..104cbee762bb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -336,6 +336,12 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-thermal.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-thermal.dtsi new file mode 100644 index 000000000000..a10010f92f96 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-thermal.dtsi @@ -0,0 +1,112 @@ +/* + * Device Tree Source for RK3368 SoC thermal + * + * Copyright (c) 2015, Fuzhou Rockchip Electronics Co., Ltd + * Caesar Wang <wxt@rock-chips.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/thermal/thermal.h> + +cpu_thermal: cpu_thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 0>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <75000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert1: cpu_alert1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <95000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +gpu_thermal: gpu_thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 1>; + + trips { + gpu_alert0: gpu_alert0 { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_crit: gpu_crit { + temperature = <1150000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index cc093a482aa4..122777b1441e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -45,6 +45,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "rockchip,rk3368"; @@ -53,6 +54,7 @@ #size-cells = <2>; aliases { + ethernet0 = &gmac; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -123,6 +125,8 @@ reg = <0x0 0x0>; cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; + + #cooling-cells = <2>; /* min followed by max */ }; cpu_l1: cpu@1 { @@ -155,6 +159,8 @@ reg = <0x0 0x100>; cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; + + #cooling-cells = <2>; /* min followed by max */ }; cpu_b1: cpu@101 { @@ -404,6 +410,27 @@ status = "disabled"; }; + thermal-zones { + #include "rk3368-thermal.dtsi" + }; + + tsadc: tsadc@ff280000 { + compatible = "rockchip,rk3368-tsadc"; + reg = <0x0 0xff280000 0x0 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; + #thermal-sensor-cells = <1>; + rockchip,hw-tshut-temp = <95000>; + status = "disabled"; + }; + gmac: ethernet@ff290000 { compatible = "rockchip,rk3368-gmac"; reg = <0x0 0xff290000 0x0 0x10000>; @@ -471,6 +498,48 @@ status = "disabled"; }; + pwm0: pwm@ff680000 { + compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff680000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&cru PCLK_PWM1>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm1: pwm@ff680010 { + compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff680010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&cru PCLK_PWM1>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm2: pwm@ff680020 { + compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff680020 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM1>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm3: pwm@ff680030 { + compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff680030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + clocks = <&cru PCLK_PWM1>; + clock-names = "pwm"; + status = "disabled"; + }; + uart2: serial@ff690000 { compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart"; reg = <0x0 0xff690000 0x0 0x100>; @@ -510,6 +579,12 @@ status = "disabled"; }; + timer@ff810000 { + compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer"; + reg = <0x0 0xff810000 0x0 0x20>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + }; + gic: interrupt-controller@ffb71000 { compatible = "arm,gic-400"; interrupt-controller; @@ -712,6 +787,24 @@ }; }; + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <3 8 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <0 8 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <3 29 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + sdio0 { sdio0_bus1: sdio0-bus1 { rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>; @@ -762,7 +855,7 @@ rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up>; }; - sdmmc_cd: sdmcc-cd { + sdmmc_cd: sdmmc-cd { rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up>; }; @@ -829,6 +922,16 @@ }; }; + tsadc { + otp_gpio: otp-gpio { + rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otp_out: otp-out { + rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>, diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile new file mode 100644 index 000000000000..8d727717c24e --- /dev/null +++ b/arch/arm64/boot/dts/socionext/Makefile @@ -0,0 +1,4 @@ +dtb-$(CONFIG_ARCH_UNIPHIER) += uniphier-ph1-ld10-ref.dtb + +always := $(dtb-y) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts new file mode 100644 index 000000000000..3e533178ba2f --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts @@ -0,0 +1,95 @@ +/* + * Device Tree Source for UniPhier PH1-LD10 Reference Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-ld10.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PH1-LD10 Reference Board"; + compatible = "socionext,ph1-ld10-ref", "socionext,ph1-ld10"; + + memory { + device_type = "memory"; + reg = <0 0x80000000 0 0xc0000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&extbus { + ranges = <1 0x00000000 0x42000000 0x02000000>; +}; + +&support_card { + ranges = <0x00000000 1 0x01f00000 0x00100000>; +}; + +ðsc { + interrupts = <0 48 4>; +}; + +&serial0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi new file mode 100644 index 000000000000..0296af9cbbdb --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi @@ -0,0 +1,280 @@ +/* + * Device Tree Source for UniPhier PH1-LD10 SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "socionext,ph1-ld10"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu2>; + }; + core1 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x000>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x80000100>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x001>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x80000100>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x80000100>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x80000100>; + }; + }; + + clocks { + uart_clk: uart_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <58820000>; + }; + + i2c_clk: i2c_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xf01>, + <1 14 0xf01>, + <1 11 0xf01>, + <1 10 0xf01>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart_clk>; + }; + + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart_clk>; + }; + + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&uart_clk>; + }; + + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 177 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&uart_clk>; + }; + + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c4: i2c@58784000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58784000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 45 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + pinctrl: pinctrl@5f801000 { + compatible = "socionext,ph1-ld10-pinctrl", "syscon"; + reg = <0x5f801000 0xe00>; + }; + + gic: interrupt-controller@5fe00000 { + compatible = "arm,gic-v3"; + reg = <0x5fe00000 0x10000>, /* GICD */ + <0x5fe80000 0x80000>; /* GICR */ + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 4>; + }; + }; +}; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi new file mode 120000 index 000000000000..f42fb6f38bd3 --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/uniphier-pinctrl.dtsi
\ No newline at end of file diff --git a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi new file mode 120000 index 000000000000..1246db9be2a1 --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/uniphier-support-card.dtsi
\ No newline at end of file diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 857eda5c7217..200fb588d0f5 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -133,6 +133,8 @@ clocks = <&misc_clk>; interrupt-parent = <&gic>; interrupts = <0 16 4>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x0 0xff0a0000 0x1000>; }; |