{nl,mac,cfg}80211: Allow user to configure basic rates for mesh

Currently mesh uses mandatory rates as the default basic rates. Allow basic
rates to be configured during mesh join. Basic rates are applied only if
channel is also provided with mesh join command.

Signed-off-by: Ashok Nagarajan <ashok@cozybit.com>
[some whitespace fixes, refuse basic rates w/o channel]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

5 files changed, 30 insertions, 4 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 31ca11672ca8..6a43c34ce96f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1176,6 +1176,7 @@ struct mesh_config {
  * @dtim_period: DTIM period to use
  * @beacon_interval: beacon interval to use
  * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
+ * @basic_rates: basic rates to use when creating the mesh
  *
  * These parameters are fixed when the mesh is created.
  */
@@ -1195,6 +1196,7 @@ struct mesh_setup {
 	u8 dtim_period;
 	u16 beacon_interval;
 	int mcast_rate[IEEE80211_NUM_BANDS];
+	u32 basic_rates;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 344a57968079..cd6f35f6e714 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1759,6 +1759,7 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
 	/* mcast rate setting in Mesh Node */
 	memcpy(sdata->vif.bss_conf.mcast_rate, setup->mcast_rate,
 						sizeof(setup->mcast_rate));
+	sdata->vif.bss_conf.basic_rates = setup->basic_rates;
 
 	sdata->vif.bss_conf.beacon_int = setup->beacon_interval;
 	sdata->vif.bss_conf.dtim_period = setup->dtim_period;
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 4ee527f78677..6c33af482df4 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -738,9 +738,6 @@ int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 		      BSS_CHANGED_HT |
 		      BSS_CHANGED_BASIC_RATES |
 		      BSS_CHANGED_BEACON_INT;
-	enum ieee80211_band band = ieee80211_get_sdata_band(sdata);
-	struct ieee80211_supported_band *sband =
-					sdata->local->hw.wiphy->bands[band];
 
 	local->fif_other_bss++;
 	/* mesh ifaces must set allmulti to forward mcast traffic */
@@ -758,7 +755,6 @@ int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 	sdata->vif.bss_conf.ht_operation_mode =
 				ifmsh->mshcfg.ht_opmode;
 	sdata->vif.bss_conf.enable_beacon = true;
-	sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(sband);
 
 	changed |= ieee80211_mps_local_status_update(sdata);
 
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 0daaf72e1b81..30c49202ee4d 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -162,6 +162,16 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 		setup->chandef.center_freq1 = setup->chandef.chan->center_freq;
 	}
 
+	/*
+	 * check if basic rates are available otherwise use mandatory rates as
+	 * basic rates
+	 */
+	if (!setup->basic_rates) {
+		struct ieee80211_supported_band *sband =
+				rdev->wiphy.bands[setup->chandef.chan->band];
+		setup->basic_rates = ieee80211_mandatory_rates(sband);
+	}
+
 	if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef))
 		return -EINVAL;
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 8aa83c04d4eb..687cb6497598 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -7487,6 +7487,23 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
 		setup.chandef.chan = NULL;
 	}
 
+	if (info->attrs[NL80211_ATTR_BSS_BASIC_RATES]) {
+		u8 *rates = nla_data(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
+		int n_rates =
+			nla_len(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
+		struct ieee80211_supported_band *sband;
+
+		if (!setup.chandef.chan)
+			return -EINVAL;
+
+		sband = rdev->wiphy.bands[setup.chandef.chan->band];
+
+		err = ieee80211_get_ratemask(sband, rates, n_rates,
+					     &setup.basic_rates);
+		if (err)
+			return err;
+	}
+
 	return cfg80211_join_mesh(rdev, dev, &setup, &cfg);
 }