Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (62 commits)
  V4L/DVB (12131): BUGFIX: An incorrect Carrier Recovery Loop optimization table was being
  V4L/DVB (12130): Fix a redundant compiler warning
  V4L/DVB (12003): v4l2: Move bounding code outside I2C ifdef block
  V4L/DVB (11913): cx231xx: TRY_FMT should not actually set anything
  V4L/DVB (11912): em28xx: Use v4l bounding/alignment function
  V4L/DVB (11911): cx231xx: Use v4l bounding/alignment function
  V4L/DVB (11910): mt9: Use v4l bounding/alignment function
  V4L/DVB (11909): cx23885: Use v4l bounding/alignment function
  V4L/DVB (11908): w8968cf: Use v4l bounding/alignment function
  V4L/DVB (11907): cx88: Use v4l bounding/alignment function
  V4L/DVB (11906): saa7134: Use v4l bounding/alignment function
  V4L/DVB (11905): vivi: Use v4l bounding/alignment function
  V4L/DVB (11904): zoran: Use v4l bounding/alignment functiob
  V4L/DVB (11903): sh_mobile_ceu_camera: Use v4l bounding/alignment function
  V4L/DVB (11902): pxa-camera: Use v4l bounding/alignment function
  V4L/DVB (11901): v4l2: Create helper function for bounding and aligning images
  V4L/DVB (12128): v4l2: update framework documentation.
  V4L/DVB (12125): v4l2: add new s_config subdev ops and v4l2_i2c_new_subdev_cfg/board calls
  V4L/DVB (12122): pvrusb2: De-obfuscate code which handles routing schemes
  V4L/DVB (12121): pvrusb2: Improve handling of routing schemes
  ...

59 files changed, 2322 insertions, 489 deletions

diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 89093f531727..0736518b2f88 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -6,8 +6,8 @@
   5 -> Leadtek Winfast 2000XP Expert                       [107d:6611,107d:6613]
   6 -> AverTV Studio 303 (M126)                            [1461:000b]
   7 -> MSI TV-@nywhere Master                              [1462:8606]
-  8 -> Leadtek Winfast DV2000                              [107d:6620]
-  9 -> Leadtek PVR 2000                                    [107d:663b,107d:663c,107d:6632]
+  8 -> Leadtek Winfast DV2000                              [107d:6620,107d:6621]
+  9 -> Leadtek PVR 2000                                    [107d:663b,107d:663c,107d:6632,107d:6630,107d:6638,107d:6631,107d:6637,107d:663d]
  10 -> IODATA GV-VCP3/PCI                                  [10fc:d003]
  11 -> Prolink PlayTV PVR
  12 -> ASUS PVR-416                                        [1043:4823,1461:c111]
@@ -59,7 +59,7 @@
  58 -> Pinnacle PCTV HD 800i                               [11bd:0051]
  59 -> DViCO FusionHDTV 5 PCI nano                         [18ac:d530]
  60 -> Pinnacle Hybrid PCTV                                [12ab:1788]
- 61 -> Winfast TV2000 XP Global                            [107d:6f18]
+ 61 -> Leadtek TV2000 XP Global                            [107d:6f18,107d:6618]
  62 -> PowerColor RA330                                    [14f1:ea3d]
  63 -> Geniatech X8000-MT DVBT                             [14f1:8852]
  64 -> DViCO FusionHDTV DVB-T PRO                          [18ac:db30]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index a98a688c11b8..873630e7e53e 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -65,3 +65,4 @@
  67 -> Terratec Grabby                          (em2860)        [0ccd:0096]
  68 -> Terratec AV350                           (em2860)        [0ccd:0084]
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
+ 70 -> Evga inDtube                             (em2882)
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index d54c1e4c6a9c..ba4706afc5fb 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -390,6 +390,30 @@ later date. It differs between i2c drivers and as such can be confusing.
 To see which chip variants are supported you can look in the i2c driver code
 for the i2c_device_id table. This lists all the possibilities.
 
+There are two more helper functions:
+
+v4l2_i2c_new_subdev_cfg: this function adds new irq and platform_data
+arguments and has both 'addr' and 'probed_addrs' arguments: if addr is not
+0 then that will be used (non-probing variant), otherwise the probed_addrs
+are probed.
+
+For example: this will probe for address 0x10:
+
+struct v4l2_subdev *sd = v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter,
+	       "module_foo", "chipid", 0, NULL, 0, I2C_ADDRS(0x10));
+
+v4l2_i2c_new_subdev_board uses an i2c_board_info struct which is passed
+to the i2c driver and replaces the irq, platform_data and addr arguments.
+
+If the subdev supports the s_config core ops, then that op is called with
+the irq and platform_data arguments after the subdev was setup. The older
+v4l2_i2c_new_(probed_)subdev functions will call s_config as well, but with
+irq set to 0 and platform_data set to NULL.
+
+Note that in the next kernel release the functions v4l2_i2c_new_subdev,
+v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr will all be
+replaced by a single v4l2_i2c_new_subdev that is identical to
+v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments.
 
 struct video_device
 -------------------
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c
index 3fe158ac7bbf..4216328552f6 100644
--- a/drivers/media/common/ir-keymaps.c
+++ b/drivers/media/common/ir-keymaps.c
@@ -2750,3 +2750,26 @@ IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE] = {
 	[0x1b] = KEY_B,		/*recall*/
 };
 EXPORT_SYMBOL_GPL(ir_codes_dm1105_nec);
+
+/* EVGA inDtube
+   Devin Heitmueller <devin.heitmueller@gmail.com>
+ */
+IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE] = {
+	[0x12] = KEY_POWER,
+	[0x02] = KEY_MODE,	/* TV */
+	[0x14] = KEY_MUTE,
+	[0x1a] = KEY_CHANNELUP,
+	[0x16] = KEY_TV2,	/* PIP */
+	[0x1d] = KEY_VOLUMEUP,
+	[0x05] = KEY_CHANNELDOWN,
+	[0x0f] = KEY_PLAYPAUSE,
+	[0x19] = KEY_VOLUMEDOWN,
+	[0x1c] = KEY_REWIND,
+	[0x0d] = KEY_RECORD,
+	[0x18] = KEY_FORWARD,
+	[0x1e] = KEY_PREVIOUS,
+	[0x1b] = KEY_STOP,
+	[0x1f] = KEY_NEXT,
+	[0x13] = KEY_CAMERA,
+};
+EXPORT_SYMBOL_GPL(ir_codes_evga_indtube);
diff --git a/drivers/media/dvb/frontends/stv0900.h b/drivers/media/dvb/frontends/stv0900.h
index 8a1332c2031d..bf4e9b633044 100644
--- a/drivers/media/dvb/frontends/stv0900.h
+++ b/drivers/media/dvb/frontends/stv0900.h
@@ -29,6 +29,11 @@
 #include <linux/dvb/frontend.h>
 #include "dvb_frontend.h"
 
+struct stv0900_reg {
+	u16 addr;
+	u8  val;
+};
+
 struct stv0900_config {
 	u8 demod_address;
 	u32 xtal;
@@ -38,7 +43,7 @@ struct stv0900_config {
 
 	u8 path1_mode;
 	u8 path2_mode;
-
+	struct stv0900_reg *ts_config_regs;
 	u8 tun1_maddress;/* 0, 1, 2, 3 for 0xc0, 0xc2, 0xc4, 0xc6 */
 	u8 tun2_maddress;
 	u8 tun1_adc;/* 1 for stv6110, 2 for stb6100 */
diff --git a/drivers/media/dvb/frontends/stv0900_core.c b/drivers/media/dvb/frontends/stv0900_core.c
index 8499bcf7f251..1da045fbb4ef 100644
--- a/drivers/media/dvb/frontends/stv0900_core.c
+++ b/drivers/media/dvb/frontends/stv0900_core.c
@@ -149,31 +149,31 @@ void stv0900_write_reg(struct stv0900_internal *i_params, u16 reg_addr,
 		dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
 }
 
-u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg_addr)
+u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg)
 {
-	u8 data[2];
 	int ret;
-	struct i2c_msg i2cmsg = {
-		.addr  = i_params->i2c_addr,
-		.flags = 0,
-		.len   = 2,
-		.buf   = data,
+	u8 b0[] = { MSB(reg), LSB(reg) };
+	u8 buf = 0;
+	struct i2c_msg msg[] = {
+		{
+			.addr	= i_params->i2c_addr,
+			.flags	= 0,
+			.buf = b0,
+			.len = 2,
+		}, {
+			.addr	= i_params->i2c_addr,
+			.flags	= I2C_M_RD,
+			.buf = &buf,
+			.len = 1,
+		},
 	};
 
-	data[0] = MSB(reg_addr);
-	data[1] = LSB(reg_addr);
-
-	ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1);
-	if (ret != 1)
-		dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
-
-	i2cmsg.flags = I2C_M_RD;
-	i2cmsg.len = 1;
-	ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1);
-	if (ret != 1)
-		dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
+	ret = i2c_transfer(i_params->i2c_adap, msg, 2);
+	if (ret != 2)
+		dprintk(KERN_ERR "%s: i2c error %d, reg[0x%02x]\n",
+				__func__, ret, reg);
 
-	return data[0];
+	return buf;
 }
 
 void extract_mask_pos(u32 label, u8 *mask, u8 *pos)
@@ -712,6 +712,44 @@ static s32 stv0900_carr_get_quality(struct dvb_frontend *fe,
 	return c_n;
 }
 
+static int stv0900_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
+{
+	struct stv0900_state *state = fe->demodulator_priv;
+	struct stv0900_internal *i_params = state->internal;
+	enum fe_stv0900_demod_num demod = state->demod;
+	u8 err_val1, err_val0;
+	s32 err_field1, err_field0;
+	u32 header_err_val = 0;
+
+	*ucblocks = 0x0;
+	if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) {
+		/* DVB-S2 delineator errors count */
+
+		/* retreiving number for errnous headers */
+		dmd_reg(err_field0, R0900_P1_BBFCRCKO0,
+					R0900_P2_BBFCRCKO0);
+		dmd_reg(err_field1, R0900_P1_BBFCRCKO1,
+					R0900_P2_BBFCRCKO1);
+
+		err_val1 = stv0900_read_reg(i_params, err_field1);
+		err_val0 = stv0900_read_reg(i_params, err_field0);
+		header_err_val = (err_val1<<8) | err_val0;
+
+		/* retreiving number for errnous packets */
+		dmd_reg(err_field0, R0900_P1_UPCRCKO0,
+					R0900_P2_UPCRCKO0);
+		dmd_reg(err_field1, R0900_P1_UPCRCKO1,
+					R0900_P2_UPCRCKO1);
+
+		err_val1 = stv0900_read_reg(i_params, err_field1);
+		err_val0 = stv0900_read_reg(i_params, err_field0);
+		*ucblocks = (err_val1<<8) | err_val0;
+		*ucblocks += header_err_val;
+	}
+
+	return 0;
+}
+
 static int stv0900_read_snr(struct dvb_frontend *fe, u16 *snr)
 {
 	*snr = stv0900_carr_get_quality(fe,
@@ -1355,7 +1393,7 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe,
 	struct stv0900_state *state = fe->demodulator_priv;
 	enum fe_stv0900_error error = STV0900_NO_ERROR;
 	enum fe_stv0900_error demodError = STV0900_NO_ERROR;
-	int selosci;
+	int selosci, i;
 
 	struct stv0900_inode *temp_int = find_inode(state->i2c_adap,
 						state->config->demod_address);
@@ -1402,7 +1440,23 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe,
 				stv0900_write_bits(state->internal, F0900_P1_ROLLOFF_CONTROL, p_init->rolloff);
 				stv0900_write_bits(state->internal, F0900_P2_ROLLOFF_CONTROL, p_init->rolloff);
 
-				stv0900_set_ts_parallel_serial(state->internal, p_init->path1_ts_clock, p_init->path2_ts_clock);
+				state->internal->ts_config = p_init->ts_config;
+				if (state->internal->ts_config == NULL)
+					stv0900_set_ts_parallel_serial(state->internal,
+							p_init->path1_ts_clock,
+							p_init->path2_ts_clock);
+				else {
+					for (i = 0; state->internal->ts_config[i].addr != 0xffff; i++)
+						stv0900_write_reg(state->internal,
+								state->internal->ts_config[i].addr,
+								state->internal->ts_config[i].val);
+
+					stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 1);
+					stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 0);
+					stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 1);
+					stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 0);
+				}
+
 				stv0900_write_bits(state->internal, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress);
 				switch (p_init->tuner1_adc) {
 				case 1:
@@ -1882,6 +1936,7 @@ static struct dvb_frontend_ops stv0900_ops = {
 	.read_ber			= stv0900_read_ber,
 	.read_signal_strength		= stv0900_read_signal_strength,
 	.read_snr			= stv0900_read_snr,
+	.read_ucblocks                  = stv0900_read_ucblocks,
 };
 
 struct dvb_frontend *stv0900_attach(const struct stv0900_config *config,
@@ -1915,6 +1970,7 @@ struct dvb_frontend *stv0900_attach(const struct stv0900_config *config,
 		init_params.tun1_iq_inversion	= STV0900_IQ_NORMAL;
 		init_params.tuner1_adc		= config->tun1_adc;
 		init_params.path2_ts_clock	= config->path2_mode;
+		init_params.ts_config		= config->ts_config_regs;
 		init_params.tun2_maddress	= config->tun2_maddress;
 		init_params.tuner2_adc		= config->tun2_adc;
 		init_params.tun2_iq_inversion	= STV0900_IQ_SWAPPED;
diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h
index 67dc8ec634e2..5ed7a145c7d3 100644
--- a/drivers/media/dvb/frontends/stv0900_priv.h
+++ b/drivers/media/dvb/frontends/stv0900_priv.h
@@ -271,6 +271,7 @@ struct stv0900_init_params{
 
 	/* IQ from the tuner2 to the demod */
 	enum stv0900_iq_inversion	tun2_iq_inversion;
+	struct stv0900_reg		*ts_config;
 };
 
 struct stv0900_search_params {
@@ -363,6 +364,7 @@ struct stv0900_internal{
 	u8			i2c_addr;
 	u8			clkmode;/* 0 for CLKI, 2 for XTALI */
 	u8			chip_id;
+	struct stv0900_reg	*ts_config;
 	enum fe_stv0900_error	errs;
 	int dmds_used;
 };
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 96ef745a2e4e..488bdfb34fb3 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -2674,7 +2674,7 @@ static u8 stv090x_optimize_carloop(struct stv090x_state *state, enum stv090x_mod
 
 static u8 stv090x_optimize_carloop_short(struct stv090x_state *state)
 {
-	struct stv090x_short_frame_crloop *short_crl;
+	struct stv090x_short_frame_crloop *short_crl = NULL;
 	s32 index = 0;
 	u8 aclc = 0x0b;
 
@@ -2694,10 +2694,13 @@ static u8 stv090x_optimize_carloop_short(struct stv090x_state *state)
 		break;
 	}
 
-	if (state->dev_ver >= 0x30)
-		short_crl = stv090x_s2_short_crl_cut20;
-	else if (state->dev_ver >= 0x20)
+	if (state->dev_ver >= 0x30) {
+		/* Cut 3.0 and up */
 		short_crl = stv090x_s2_short_crl_cut30;
+	} else {
+		/* Cut 2.0 and up: we don't support cuts older than 2.0 */
+		short_crl = stv090x_s2_short_crl_cut20;
+	}
 
 	if (state->srate <= 3000000)
 		aclc = short_crl[index].crl_2;
diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
index 4302c563a6b8..cc8862ce4aae 100644
--- a/drivers/media/dvb/frontends/tda10048.c
+++ b/drivers/media/dvb/frontends/tda10048.c
@@ -210,6 +210,7 @@ static struct pll_tab {
 	{ TDA10048_CLK_4000,  TDA10048_IF_36130, 10, 0, 0 },
 	{ TDA10048_CLK_16000, TDA10048_IF_3300,  10, 3, 0 },
 	{ TDA10048_CLK_16000, TDA10048_IF_3500,  10, 3, 0 },
+	{ TDA10048_CLK_16000, TDA10048_IF_3800,  10, 3, 0 },
 	{ TDA10048_CLK_16000, TDA10048_IF_4000,  10, 3, 0 },
 	{ TDA10048_CLK_16000, TDA10048_IF_4300,  10, 3, 0 },
 	{ TDA10048_CLK_16000, TDA10048_IF_36130, 10, 3, 0 },
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 32be382f0e97..a246903c3341 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1422,8 +1422,8 @@ int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
 		struct smscore_gpio_config *pGpioConfig) {
 
 	u32 totalLen;
-	u32 TranslatedPinNum;
-	u32 GroupNum;
+	u32 TranslatedPinNum = 0;
+	u32 GroupNum = 0;
 	u32 ElectricChar;
 	u32 groupCfg;
 	void *buffer;
diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c
index 393623818ade..3cd76dddb6aa 100644
--- a/drivers/media/radio/radio-tea5764.c
+++ b/drivers/media/radio/radio-tea5764.c
@@ -322,7 +322,9 @@ static int vidioc_g_tuner(struct file *file, void *priv,
 	v->rangehigh  = FREQ_MAX * FREQ_MUL;
 	v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
 	if (r->tunchk & TEA5764_TUNCHK_STEREO)
-			v->rxsubchans = V4L2_TUNER_SUB_STEREO;
+		v->rxsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		v->rxsubchans = V4L2_TUNER_SUB_MONO;
 	v->audmode = tea5764_get_audout_mode(radio);
 	v->signal = TEA5764_TUNCHK_LEVEL(r->tunchk) * 0xffff / 0xf;
 	v->afc = TEA5764_TUNCHK_IFCNT(r->tunchk);
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 94f440535c64..061e147f6f26 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -866,9 +866,13 @@ config USB_W9968CF
 	  module will be called w9968cf.
 
 config USB_OV511
-	tristate "USB OV511 Camera support"
+	tristate "USB OV511 Camera support (DEPRECATED)"
 	depends on VIDEO_V4L1
 	---help---
+	  This driver is DEPRECATED please use the gspca ov519 module
+	  instead. Note that for the ov511 / ov518 support of the gspca module
+	  you need atleast version 0.6.0 of libv4l.
+
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port. See <file:Documentation/video4linux/ov511.txt>
 	  for more information and for a list of supported cameras.
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 8e35c3aed544..5136df198338 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -61,6 +61,8 @@ int cx18_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl)
 
 	switch (qctrl->id) {
 	/* Standard V4L2 controls */
+	case V4L2_CID_USER_CLASS:
+		return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
 	case V4L2_CID_BRIGHTNESS:
 	case V4L2_CID_HUE:
 	case V4L2_CID_SATURATION:
diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index 6a9464079b4c..28f48f41f218 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -1052,22 +1052,13 @@ int cx231xx_set_audio_decoder_input(struct cx231xx *dev,
 /* Set resolution of the video */
 int cx231xx_resolution_set(struct cx231xx *dev)
 {
-	int width, height;
-	u32 hscale, vscale;
-	int status = 0;
-
-	width = dev->width;
-	height = dev->height;
-
-	get_scale(dev, width, height, &hscale, &vscale);
-
 	/* set horzontal scale */
-	status = vid_blk_write_word(dev, HSCALE_CTRL, hscale);
+	int status = vid_blk_write_word(dev, HSCALE_CTRL, dev->hscale);
+	if (status)
+		return status;
 
 	/* set vertical scale */
-	status = vid_blk_write_word(dev, VSCALE_CTRL, vscale);
-
-	return status;
+	return vid_blk_write_word(dev, VSCALE_CTRL, dev->vscale);
 }
 
 /******************************************************************************
@@ -2055,7 +2046,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
 
 int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type)
 {
-	int rc;
+	int rc = -1;
 	u32 ep_mask = -1;
 	struct pcb_config *pcb_config;
 
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index a23ae73fe634..609bae6098d3 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -893,9 +893,9 @@ static int check_dev(struct cx231xx *dev)
 	return 0;
 }
 
-void get_scale(struct cx231xx *dev,
-	       unsigned int width, unsigned int height,
-	       unsigned int *hscale, unsigned int *vscale)
+static void get_scale(struct cx231xx *dev,
+		      unsigned int width, unsigned int height,
+		      unsigned int *hscale, unsigned int *vscale)
 {
 	unsigned int maxw = norm_maxw(dev);
 	unsigned int maxh = norm_maxh(dev);
@@ -907,10 +907,6 @@ void get_scale(struct cx231xx *dev,
 	*vscale = (((unsigned long)maxh) << 12) / height - 4096L;
 	if (*vscale >= 0x4000)
 		*vscale = 0x3fff;
-
-	dev->hscale = *hscale;
-	dev->vscale = *vscale;
-
 }
 
 /* ------------------------------------------------------------------
@@ -955,8 +951,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 {
 	struct cx231xx_fh *fh = priv;
 	struct cx231xx *dev = fh->dev;
-	int width = f->fmt.pix.width;
-	int height = f->fmt.pix.height;
+	unsigned int width = f->fmt.pix.width;
+	unsigned int height = f->fmt.pix.height;
 	unsigned int maxw = norm_maxw(dev);
 	unsigned int maxh = norm_maxh(dev);
 	unsigned int hscale, vscale;
@@ -971,17 +967,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 
 	/* width must even because of the YUYV format
 	   height must be even because of interlacing */
-	height &= 0xfffe;
-	width &= 0xfffe;
-
-	if (unlikely(height < 32))
-		height = 32;
-	if (unlikely(height > maxh))
-		height = maxh;
-	if (unlikely(width < 48))
-		width = 48;
-	if (unlikely(width > maxw))
-		width = maxw;
+	v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0);
 
 	get_scale(dev, width, height, &hscale, &vscale);
 
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index e38eb2d425f7..a0f823ac6b8d 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -722,9 +722,6 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input);
 int cx231xx_set_decoder_video_input(struct cx231xx *dev, u8 pin_type, u8 input);
 int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev);
 int cx231xx_set_audio_input(struct cx231xx *dev, u8 input);
-void get_scale(struct cx231xx *dev,
-	       unsigned int width, unsigned int height,
-	       unsigned int *hscale, unsigned int *vscale);
 
 /* Provided by cx231xx-video.c */
 int cx231xx_register_extension(struct cx231xx_ops *dev);
diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c
index 8ded52946334..4c8e95853fa3 100644
--- a/drivers/media/video/cx2341x.c
+++ b/drivers/media/video/cx2341x.c
@@ -500,6 +500,8 @@ int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
 	int err;
 
 	switch (qctrl->id) {
+	case V4L2_CID_MPEG_CLASS:
+		return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
 	case V4L2_CID_MPEG_STREAM_TYPE:
 		return v4l2_ctrl_query_fill(qctrl,
 				V4L2_MPEG_STREAM_TYPE_MPEG2_PS,
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index e236df23370e..48a975134ac5 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -45,6 +45,7 @@
 #include "dibx000_common.h"
 #include "zl10353.h"
 #include "stv0900.h"
+#include "stv0900_reg.h"
 #include "stv6110.h"
 #include "lnbh24.h"
 #include "cx24116.h"
@@ -242,12 +243,22 @@ static struct tda18271_std_map hauppauge_tda18271_std_map = {
 		      .if_lvl = 6, .rfagc_top = 0x37 },
 };
 
+static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
+	.dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_7   = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_8   = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
 static struct tda18271_config hauppauge_tda18271_config = {
 	.std_map = &hauppauge_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
 };
 
 static struct tda18271_config hauppauge_hvr1200_tuner_config = {
+	.std_map = &hauppauge_hvr1200_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
 };
 
@@ -370,13 +381,25 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = {
 	.disable_i2c_gate_ctrl = 1,
 };
 
+static struct stv0900_reg stv0900_ts_regs[] = {
+	{ R0900_TSGENERAL, 0x00 },
+	{ R0900_P1_TSSPEED, 0x40 },
+	{ R0900_P2_TSSPEED, 0x40 },
+	{ R0900_P1_TSCFGM, 0xc0 },
+	{ R0900_P2_TSCFGM, 0xc0 },
+	{ R0900_P1_TSCFGH, 0xe0 },
+	{ R0900_P2_TSCFGH, 0xe0 },
+	{ R0900_P1_TSCFGL, 0x20 },
+	{ R0900_P2_TSCFGL, 0x20 },
+	{ 0xffff, 0xff }, /* terminate */
+};
+
 static struct stv0900_config netup_stv0900_config = {
 	.demod_address = 0x68,
 	.xtal = 27000000,
 	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
 	.diseqc_mode = 2,/* 2/3 PWM */
-	.path1_mode = 2,/*Serial continues clock */
-	.path2_mode = 2,/*Serial continues clock */
+	.ts_config_regs = stv0900_ts_regs,
 	.tun1_maddress = 0,/* 0x60 */
 	.tun2_maddress = 3,/* 0x63 */
 	.tun1_adc = 1,/* 1 Vpp */
@@ -736,7 +759,8 @@ static int dvb_register(struct cx23885_tsport *port)
 					if (!dvb_attach(lnbh24_attach,
 							fe0->dvb.frontend,
 							&i2c_bus->i2c_adap,
-							LNBH24_PCL, 0, 0x09))
+							LNBH24_PCL,
+							LNBH24_TTX, 0x09))
 						printk(KERN_ERR
 							"No LNBH24 found!\n");
 
@@ -756,7 +780,8 @@ static int dvb_register(struct cx23885_tsport *port)
 					if (!dvb_attach(lnbh24_attach,
 							fe0->dvb.frontend,
 							&i2c_bus->i2c_adap,
-							LNBH24_PCL, 0, 0x0a))
+							LNBH24_PCL,
+							LNBH24_TTX, 0x0a))
 						printk(KERN_ERR
 							"No LNBH24 found!\n");
 
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 66bbd2e71105..70836af3ab48 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -963,15 +963,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	}
 
 	f->fmt.pix.field = field;
-	if (f->fmt.pix.height < 32)
-		f->fmt.pix.height = 32;
-	if (f->fmt.pix.height > maxh)
-		f->fmt.pix.height = maxh;
-	if (f->fmt.pix.width < 48)
-		f->fmt.pix.width = 48;
-	if (f->fmt.pix.width > maxw)
-		f->fmt.pix.width = maxw;
-	f->fmt.pix.width &= ~0x03;
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
 	f->fmt.pix.bytesperline =
 		(f->fmt.pix.width * fmt->depth) >> 3;
 	f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 94b7a52629d0..a5cc1c1fc2d6 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1524,33 +1524,45 @@ static const struct cx88_board cx88_boards[] = {
 		},
 		.mpeg           = CX88_MPEG_DVB,
 	},
+	/* Terry Wu <terrywu2009@gmail.com> */
+	/* TV Audio :      set GPIO 2, 18, 19 value to 0, 1, 0 */
+	/* FM Audio :      set GPIO 2, 18, 19 value to 0, 0, 0 */
+	/* Line-in Audio : set GPIO 2, 18, 19 value to 0, 1, 1 */
+	/* Mute Audio :    set GPIO 2 value to 1               */
 	[CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = {
-		.name           = "Winfast TV2000 XP Global",
+		.name           = "Leadtek TV2000 XP Global",
 		.tuner_type     = TUNER_XC2028,
 		.tuner_addr     = 0x61,
+		.radio_type     = TUNER_XC2028,
+		.radio_addr     = 0x61,
 		.input          = { {
 			.type   = CX88_VMUX_TELEVISION,
 			.vmux   = 0,
-			.gpio0  = 0x0400, /* pin 2:mute = 0 (off?) */
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
 			.gpio1  = 0x0000,
-			.gpio2  = 0x0800, /* pin 19:audio = 0 (tv) */
-
+			.gpio2  = 0x0C04,       /* pin 18 = 1, pin 19 = 0 */
+			.gpio3  = 0x0000,
 		}, {
 			.type   = CX88_VMUX_COMPOSITE1,
 			.vmux   = 1,
-			.gpio0  = 0x0400, /* probably?  or 0x0404 to turn mute on */
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
 			.gpio1  = 0x0000,
-			.gpio2  = 0x0808, /* pin 19:audio = 1 (line) */
-
+			.gpio2  = 0x0C0C,       /* pin 18 = 1, pin 19 = 1 */
+			.gpio3  = 0x0000,
 		}, {
 			.type   = CX88_VMUX_SVIDEO,
 			.vmux   = 2,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C0C,       /* pin 18 = 1, pin 19 = 1 */
+			.gpio3  = 0x0000,
 		} },
 		.radio = {
 			.type   = CX88_RADIO,
-			.gpio0  = 0x004ff,
-			.gpio1  = 0x010ff,
-			.gpio2  = 0x0ff,
+			.gpio0  = 0x0400,        /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C00,       /* pin 18 = 0, pin 19 = 0 */
+			.gpio3  = 0x0000,
 		},
 	},
 	[CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
@@ -2438,6 +2450,41 @@ static const struct cx88_subid cx88_subids[] = {
 		.subvendor = 0x107d,
 		.subdevice = 0x6654,
 		.card      = CX88_BOARD_WINFAST_DTV1800H,
+	}, {
+		/* PVR2000 PAL Model [107d:6630] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6630,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 PAL Model [107d:6638] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6638,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 NTSC Model [107d:6631] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6631,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 NTSC Model [107d:6637] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6637,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 NTSC Model [107d:663d] */
+		.subvendor = 0x107d,
+		.subdevice = 0x663d,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* DV2000 NTSC Model [107d:6621] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6621,
+		.card      = CX88_BOARD_WINFAST_DV2000,
+	}, {
+		/* TV2000 XP Global [107d:6618]  */
+		.subvendor = 0x107d,
+		.subdevice = 0x6618,
+		.card      = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL,
 	},
 };
 
@@ -2446,12 +2493,6 @@ static const struct cx88_subid cx88_subids[] = {
 
 static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
 {
-	/* This is just for the "Winfast 2000XP Expert" board ATM; I don't have data on
-	 * any others.
-	 *
-	 * Byte 0 is 1 on the NTSC board.
-	 */
-
 	if (eeprom_data[4] != 0x7d ||
 	    eeprom_data[5] != 0x10 ||
 	    eeprom_data[7] != 0x66) {
@@ -2459,8 +2500,19 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
 		return;
 	}
 
-	core->board.tuner_type = (eeprom_data[6] == 0x13) ?
-		TUNER_PHILIPS_FM1236_MK3 : TUNER_PHILIPS_FM1216ME_MK3;
+	/* Terry Wu <terrywu2009@gmail.com> */
+	switch (eeprom_data[6]) {
+	case 0x13: /* SSID 6613 for TV2000 XP Expert NTSC Model */
+	case 0x21: /* SSID 6621 for DV2000 NTSC Model */
+	case 0x31: /* SSID 6631 for PVR2000 NTSC Model */
+	case 0x37: /* SSID 6637 for PVR2000 NTSC Model */
+	case 0x3d: /* SSID 6637 for PVR2000 NTSC Model */
+		core->board.tuner_type = TUNER_PHILIPS_FM1236_MK3;
+		break;
+	default:
+		core->board.tuner_type = TUNER_PHILIPS_FM1216ME_MK3;
+		break;
+	}
 
 	info_printk(core, "Leadtek Winfast 2000XP Expert config: "
 		    "tuner=%d, eeprom[0]=0x%02x\n",
@@ -2713,7 +2765,6 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core,
 {
 	/* Board-specific callbacks */
 	switch (core->boardnr) {
-	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
 	case CX88_BOARD_GENIATECH_X8000_MT:
 	case CX88_BOARD_KWORLD_ATSC_120:
@@ -2725,6 +2776,7 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core,
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
 	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
 		return cx88_dvico_xc2028_callback(core, command, arg);
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_WINFAST_DTV1800H:
 		return cx88_xc3028_winfast1800h_callback(core, command, arg);
 	}
@@ -2914,6 +2966,7 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core)
 		udelay(1000);
 		break;
 
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_WINFAST_DTV1800H:
 		/* GPIO 12 (xc3028 tuner reset) */
 		cx_set(MO_GP1_IO, 0x1010);
@@ -2950,6 +3003,7 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl)
 	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
 		ctl->demod = XC3028_FE_OREN538;
 		break;
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
 	case CX88_BOARD_PROLINK_PV_8000GT:
 		/*
@@ -2993,6 +3047,8 @@ static void cx88_card_setup(struct cx88_core *core)
 		if (0 == core->i2c_rc)
 			gdi_eeprom(core, eeprom);
 		break;
+	case CX88_BOARD_LEADTEK_PVR2000:
+	case CX88_BOARD_WINFAST_DV2000:
 	case CX88_BOARD_WINFAST2000XP_EXPERT:
 		if (0 == core->i2c_rc)
 			leadtek_eeprom(core, eeprom);
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 0ccac702bea4..b12770848c00 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1111,15 +1111,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	}
 
 	f->fmt.pix.field = field;
-	if (f->fmt.pix.height < 32)
-		f->fmt.pix.height = 32;
-	if (f->fmt.pix.height > maxh)
-		f->fmt.pix.height = maxh;
-	if (f->fmt.pix.width < 48)
-		f->fmt.pix.width = 48;
-	if (f->fmt.pix.width > maxw)
-		f->fmt.pix.width = maxw;
-	f->fmt.pix.width &= ~0x03;
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
 	f->fmt.pix.bytesperline =
 		(f->fmt.pix.width * fmt->depth) >> 3;
 	f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 00cc791a9e44..c43fdb9bc888 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -139,6 +139,24 @@ static struct em28xx_reg_seq kworld_330u_digital[] = {
 	{ -1,			-1,	-1,		-1},
 };
 
+/* Evga inDtube
+   GPIO0 - Enable digital power (s5h1409) - low to enable
+   GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
+   GPIO4 - xc3028 reset
+   GOP3  - s5h1409 reset
+ */
+static struct em28xx_reg_seq evga_indtube_analog[] = {
+	{EM28XX_R08_GPIO,	0x79,   0xff,		60},
+	{	-1,		-1,	-1,		-1},
+};
+
+static struct em28xx_reg_seq evga_indtube_digital[] = {
+	{EM28XX_R08_GPIO,	0x7a,	0xff,		 1},
+	{EM2880_R04_GPO,	0x04,	0xff,		10},
+	{EM2880_R04_GPO,	0x0c,	0xff,		 1},
+	{ -1,			-1,	-1,		-1},
+};
+
 /* Callback for the most boards */
 static struct em28xx_reg_seq default_tuner_gpio[] = {
 	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
@@ -1449,6 +1467,33 @@ struct em28xx_board em28xx_boards[] = {
 			.gpio     = terratec_av350_unmute_gpio,
 		} },
 	},
+	[EM2882_BOARD_EVGA_INDTUBE] = {
+		.name         = "Evga inDtube",
+		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
+		.decoder      = EM28XX_TVP5150,
+		.xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
+		.mts_firmware = 1,
+		.has_dvb      = 1,
+		.dvb_gpio     = evga_indtube_digital,
+		.ir_codes     = ir_codes_evga_indtube,
+		.input        = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = evga_indtube_analog,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = evga_indtube_analog,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = evga_indtube_analog,
+		} },
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1571,6 +1616,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
 	{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
 	{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
 	{0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
+	{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
 };
 
 /* I2C devicelist hash table for devices with generic USB IDs */
@@ -1834,6 +1880,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 		ctl->demod = XC3028_FE_CHINA;
 		ctl->fname = XC2028_DEFAULT_FIRMWARE;
 		break;
+	case EM2882_BOARD_EVGA_INDTUBE:
+		ctl->demod = XC3028_FE_CHINA;
+		ctl->fname = XC3028L_DEFAULT_FIRMWARE;
+		break;
 	default:
 		ctl->demod = XC3028_FE_OREN538;
 	}
@@ -2101,6 +2151,12 @@ void em28xx_card_setup(struct em28xx *dev)
 	case EM2880_BOARD_MSI_DIGIVOX_AD:
 		if (!em28xx_hint_board(dev))
 			em28xx_set_model(dev);
+
+		/* In cases where we had to use a board hint, the call to
+		   em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
+		   so make the call now so the analog GPIOs are set properly
+		   before probing the i2c bus. */
+		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		break;
 	}
 
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 563dd2b1c8e9..e7b47c8da8f3 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -445,6 +445,7 @@ static int dvb_init(struct em28xx *dev)
 		}
 		break;
 	case EM2883_BOARD_KWORLD_HYBRID_330U:
+	case EM2882_BOARD_EVGA_INDTUBE:
 		dvb->frontend = dvb_attach(s5h1409_attach,
 					   &em28xx_s5h1409_with_xc3028,
 					   &dev->i2c_adap);
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 882796e84dbc..8fe1beecfffa 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -687,8 +687,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 {
 	struct em28xx_fh      *fh    = priv;
 	struct em28xx         *dev   = fh->dev;
-	int                   width  = f->fmt.pix.width;
-	int                   height = f->fmt.pix.height;
+	unsigned int          width  = f->fmt.pix.width;
+	unsigned int          height = f->fmt.pix.height;
 	unsigned int          maxw   = norm_maxw(dev);
 	unsigned int          maxh   = norm_maxh(dev);
 	unsigned int          hscale, vscale;
@@ -701,34 +701,20 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 		return -EINVAL;
 	}
 
-	/* width must even because of the YUYV format
-	   height must be even because of interlacing */
-	height &= 0xfffe;
-	width  &= 0xfffe;
-
-	if (unlikely(height < 32))
-		height = 32;
-	if (unlikely(height > maxh))
-		height = maxh;
-	if (unlikely(width < 48))
-		width = 48;
-	if (unlikely(width > maxw))
-		width = maxw;
-
 	if (dev->board.is_em2800) {
 		/* the em2800 can only scale down to 50% */
-		if (height % (maxh / 2))
-			height = maxh;
-		if (width % (maxw / 2))
-			width = maxw;
-		/* according to empiatech support */
-		/* the MaxPacketSize is to small to support */
-		/* framesizes larger than 640x480 @ 30 fps */
-		/* or 640x576 @ 25 fps. As this would cut */
-		/* of a part of the image we prefer */
-		/* 360x576 or 360x480 for now */
+		height = height > (3 * maxh / 4) ? maxh : maxh / 2;
+		width = width > (3 * maxw / 4) ? maxw : maxw / 2;
+		/* According to empiatech support the MaxPacketSize is too small
+		 * to support framesizes larger than 640x480 @ 30 fps or 640x576
+		 * @ 25 fps.  As this would cut of a part of the image we prefer
+		 * 360x576 or 360x480 for now */
 		if (width == maxw && height == maxh)
 			width /= 2;
+	} else {
+		/* width must even because of the YUYV format
+		   height must be even because of interlacing */
+		v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0);
 	}
 
 	get_scale(dev, width, height, &hscale, &vscale);
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 8bf81be1da61..813ce45c2f99 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -106,6 +106,7 @@
 #define EM2860_BOARD_TERRATEC_GRABBY		  67
 #define EM2860_BOARD_TERRATEC_AV350		  68
 #define EM2882_BOARD_KWORLD_ATSC_315U		  69
+#define EM2882_BOARD_EVGA_INDTUBE		  70
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index f7e0355ad644..1e89600986c8 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1042,13 +1042,11 @@ static int vidioc_queryctrl(struct file *file, void *priv,
 		for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
 			if (gspca_dev->ctrl_dis & (1 << i))
 				continue;
-			if (ctrls->qctrl.id < id)
+			if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id)
 				continue;
-			if (ctrls != NULL) {
-				if (gspca_dev->sd_desc->ctrls[i].qctrl.id
+			if (ctrls && gspca_dev->sd_desc->ctrls[i].qctrl.id
 					    > ctrls->qctrl.id)
-					continue;
-			}
+				continue;
 			ctrls = &gspca_dev->sd_desc->ctrls[i];
 		}
 	} else {
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 188866ac6cef..2f6e135d94bc 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -50,12 +50,18 @@ static int i2c_detect_tries = 10;
 struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
+	__u8 packet_nr;
+
 	char bridge;
 #define BRIDGE_OV511		0
 #define BRIDGE_OV511PLUS	1
 #define BRIDGE_OV518		2
 #define BRIDGE_OV518PLUS	3
 #define BRIDGE_OV519		4
+#define BRIDGE_MASK		7
+
+	char invert_led;
+#define BRIDGE_INVERT_LED	8
 
 	/* Determined by sensor type */
 	__u8 sif;
@@ -65,22 +71,25 @@ struct sd {
 	__u8 colors;
 	__u8 hflip;
 	__u8 vflip;
+	__u8 autobrightness;
+	__u8 freq;
 
 	__u8 stopped;		/* Streaming is temporarily paused */
 
-	__u8 frame_rate;	/* current Framerate (OV519 only) */
-	__u8 clockdiv;		/* clockdiv override for OV519 only */
+	__u8 frame_rate;	/* current Framerate */
+	__u8 clockdiv;		/* clockdiv override */
 
 	char sensor;		/* Type of image sensor chip (SEN_*) */
 #define SEN_UNKNOWN 0
 #define SEN_OV6620 1
 #define SEN_OV6630 2
-#define SEN_OV7610 3
-#define SEN_OV7620 4
-#define SEN_OV7640 5
-#define SEN_OV7670 6
-#define SEN_OV76BE 7
-#define SEN_OV8610 8
+#define SEN_OV66308AF 3
+#define SEN_OV7610 4
+#define SEN_OV7620 5
+#define SEN_OV7640 6
+#define SEN_OV7670 7
+#define SEN_OV76BE 8
+#define SEN_OV8610 9
 };
 
 /* V4L2 controls supported by the driver */
@@ -94,11 +103,17 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
 static void setbrightness(struct gspca_dev *gspca_dev);
 static void setcontrast(struct gspca_dev *gspca_dev);
 static void setcolors(struct gspca_dev *gspca_dev);
+static void setautobrightness(struct sd *sd);
+static void setfreq(struct sd *sd);
 
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
 	{
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
@@ -141,7 +156,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setcolors,
 	    .get = sd_getcolors,
 	},
-/* next controls work with ov7670 only */
+/* The flip controls work with ov7670 only */
 #define HFLIP_IDX 3
 	{
 	    {
@@ -172,6 +187,51 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setvflip,
 	    .get = sd_getvflip,
 	},
+#define AUTOBRIGHT_IDX 5
+	{
+	    {
+		.id      = V4L2_CID_AUTOBRIGHTNESS,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Auto Brightness",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define AUTOBRIGHT_DEF 1
+		.default_value = AUTOBRIGHT_DEF,
+	    },
+	    .set = sd_setautobrightness,
+	    .get = sd_getautobrightness,
+	},
+#define FREQ_IDX 6
+	{
+	    {
+		.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
+		.type    = V4L2_CTRL_TYPE_MENU,
+		.name    = "Light frequency filter",
+		.minimum = 0,
+		.maximum = 2,	/* 0: 0, 1: 50Hz, 2:60Hz */
+		.step    = 1,
+#define FREQ_DEF 0
+		.default_value = FREQ_DEF,
+	    },
+	    .set = sd_setfreq,
+	    .get = sd_getfreq,
+	},
+#define OV7670_FREQ_IDX 7
+	{
+	    {
+		.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
+		.type    = V4L2_CTRL_TYPE_MENU,
+		.name    = "Light frequency filter",
+		.minimum = 0,
+		.maximum = 3,	/* 0: 0, 1: 50Hz, 2:60Hz 3: Auto Hz */
+		.step    = 1,
+#define OV7670_FREQ_DEF 3
+		.default_value = OV7670_FREQ_DEF,
+	    },
+	    .set = sd_setfreq,
+	    .get = sd_getfreq,
+	},
 };
 
 static const struct v4l2_pix_format ov519_vga_mode[] = {
@@ -187,11 +247,21 @@ static const struct v4l2_pix_format ov519_vga_mode[] = {
 		.priv = 0},
 };
 static const struct v4l2_pix_format ov519_sif_mode[] = {
+	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 3},
 	{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 176,
 		.sizeimage = 176 * 144 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
+	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2},
 	{352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 352,
 		.sizeimage = 352 * 288 * 3 / 8 + 590,
@@ -199,42 +269,118 @@ static const struct v4l2_pix_format ov519_sif_mode[] = {
 		.priv = 0},
 };
 
+/* Note some of the sizeimage values for the ov511 / ov518 may seem
+   larger then necessary, however they need to be this big as the ov511 /
+   ov518 always fills the entire isoc frame, using 0 padding bytes when
+   it doesn't have any data. So with low framerates the amount of data
+   transfered can become quite large (libv4l will remove all the 0 padding
+   in userspace). */
 static const struct v4l2_pix_format ov518_vga_mode[] = {
 	{320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240 * 3 / 8 + 590,
+		.sizeimage = 320 * 240 * 3,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
 	{640, 480, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
 		.bytesperline = 640,
-		.sizeimage = 640 * 480 * 3 / 8 + 590,
+		.sizeimage = 640 * 480 * 2,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
 static const struct v4l2_pix_format ov518_sif_mode[] = {
+	{160, 120, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 70000,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 3},
 	{176, 144, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 40000,
+		.sizeimage = 70000,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
+	{320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2},
 	{352, 288, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
 		.bytesperline = 352,
-		.sizeimage = 352 * 288 * 3 / 8 + 590,
+		.sizeimage = 352 * 288 * 3,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
 
+static const struct v4l2_pix_format ov511_vga_mode[] = {
+	{320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1},
+	{640, 480, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480 * 2,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0},
+};
+static const struct v4l2_pix_format ov511_sif_mode[] = {
+	{160, 120, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 70000,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 3},
+	{176, 144, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 70000,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1},
+	{320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2},
+	{352, 288, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+		.bytesperline = 352,
+		.sizeimage = 352 * 288 * 3,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0},
+};
 
 /* Registers common to OV511 / OV518 */
+#define R51x_FIFO_PSIZE			0x30	/* 2 bytes wide w/ OV518(+) */
 #define R51x_SYS_RESET          	0x50
+	/* Reset type flags */
+	#define	OV511_RESET_OMNICE	0x08
 #define R51x_SYS_INIT         		0x53
 #define R51x_SYS_SNAP			0x52
 #define R51x_SYS_CUST_ID		0x5F
 #define R51x_COMP_LUT_BEGIN		0x80
 
 /* OV511 Camera interface register numbers */
+#define R511_CAM_DELAY			0x10
+#define R511_CAM_EDGE			0x11
+#define R511_CAM_PXCNT			0x12
+#define R511_CAM_LNCNT			0x13
+#define R511_CAM_PXDIV			0x14
+#define R511_CAM_LNDIV			0x15
+#define R511_CAM_UV_EN			0x16
+#define R511_CAM_LINE_MODE		0x17
+#define R511_CAM_OPTS			0x18
+
+#define R511_SNAP_FRAME			0x19
+#define R511_SNAP_PXCNT			0x1A
+#define R511_SNAP_LNCNT			0x1B
+#define R511_SNAP_PXDIV			0x1C
+#define R511_SNAP_LNDIV			0x1D
+#define R511_SNAP_UV_EN			0x1E
+#define R511_SNAP_UV_EN			0x1E
+#define R511_SNAP_OPTS			0x1F
+
+#define R511_DRAM_FLOW_CTL		0x20
+#define R511_FIFO_OPTS			0x31
+#define R511_I2C_CTL			0x40
 #define R511_SYS_LED_CTL		0x55	/* OV511+ only */
-#define	OV511_RESET_NOREGS		0x3F	/* All but OV511 & regs */
+#define R511_COMP_EN			0x78
+#define R511_COMP_LUT_EN		0x79
 
 /* OV518 Camera interface register numbers */
 #define R518_GPIO_OUT			0x56	/* OV518(+) only */
@@ -383,7 +529,7 @@ static const struct ov_i2c_regvals norm_6x20[] = {
 	{ 0x28, 0x05 },
 	{ 0x2a, 0x04 }, /* Disable framerate adjust */
 /*	{ 0x2b, 0xac },  * Framerate; Set 2a[7] first */
-	{ 0x2d, 0x99 },
+	{ 0x2d, 0x85 },
 	{ 0x33, 0xa0 }, /* Color Processing Parameter */
 	{ 0x34, 0xd2 }, /* Max A/D range */
 	{ 0x38, 0x8b },
@@ -416,7 +562,7 @@ static const struct ov_i2c_regvals norm_6x30[] = {
 	{ 0x07, 0x2d }, /* Sharpness */
 	{ 0x0c, 0x20 },
 	{ 0x0d, 0x20 },
-	{ 0x0e, 0x20 },
+	{ 0x0e, 0xa0 }, /* Was 0x20, bit7 enables a 2x gain which we need */
 	{ 0x0f, 0x05 },
 	{ 0x10, 0x9a },
 	{ 0x11, 0x00 }, /* Pixel clock = fastest */
@@ -558,7 +704,7 @@ static const struct ov_i2c_regvals norm_7620[] = {
 	{ 0x23, 0x00 },
 	{ 0x26, 0xa2 },
 	{ 0x27, 0xea },
-	{ 0x28, 0x20 },
+	{ 0x28, 0x22 }, /* Was 0x20, bit1 enables a 2x gain which we need */
 	{ 0x29, 0x00 },
 	{ 0x2a, 0x10 },
 	{ 0x2b, 0x00 },
@@ -999,13 +1145,128 @@ static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n)
 	return ret;
 }
 
+static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value)
+{
+	int rc, retries;
+
+	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
+
+	/* Three byte write cycle */
+	for (retries = 6; ; ) {
+		/* Select camera register */
+		rc = reg_w(sd, R51x_I2C_SADDR_3, reg);
+		if (rc < 0)
+			return rc;
+
+		/* Write "value" to I2C data port of OV511 */
+		rc = reg_w(sd, R51x_I2C_DATA, value);
+		if (rc < 0)
+			return rc;
+
+		/* Initiate 3-byte write cycle */
+		rc = reg_w(sd, R511_I2C_CTL, 0x01);
+		if (rc < 0)
+			return rc;
+
+		do
+			rc = reg_r(sd, R511_I2C_CTL);
+		while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
+
+		if (rc < 0)
+			return rc;
+
+		if ((rc & 2) == 0) /* Ack? */
+			break;
+		if (--retries < 0) {
+			PDEBUG(D_USBO, "i2c write retries exhausted");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static int ov511_i2c_r(struct sd *sd, __u8 reg)
+{
+	int rc, value, retries;
+
+	/* Two byte write cycle */
+	for (retries = 6; ; ) {
+		/* Select camera register */
+		rc = reg_w(sd, R51x_I2C_SADDR_2, reg);
+		if (rc < 0)
+			return rc;
+
+		/* Initiate 2-byte write cycle */
+		rc = reg_w(sd, R511_I2C_CTL, 0x03);
+		if (rc < 0)
+			return rc;
+
+		do
+			rc = reg_r(sd, R511_I2C_CTL);
+		while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
+
+		if (rc < 0)
+			return rc;
+
+		if ((rc & 2) == 0) /* Ack? */
+			break;
+
+		/* I2C abort */
+		reg_w(sd, R511_I2C_CTL, 0x10);
+
+		if (--retries < 0) {
+			PDEBUG(D_USBI, "i2c write retries exhausted");
+			return -1;
+		}
+	}
+
+	/* Two byte read cycle */
+	for (retries = 6; ; ) {
+		/* Initiate 2-byte read cycle */
+		rc = reg_w(sd, R511_I2C_CTL, 0x05);
+		if (rc < 0)
+			return rc;
+
+		do
+			rc = reg_r(sd, R511_I2C_CTL);
+		while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
+
+		if (rc < 0)
+			return rc;
+
+		if ((rc & 2) == 0) /* Ack? */
+			break;
+
+		/* I2C abort */
+		rc = reg_w(sd, R511_I2C_CTL, 0x10);
+		if (rc < 0)
+			return rc;
+
+		if (--retries < 0) {
+			PDEBUG(D_USBI, "i2c read retries exhausted");
+			return -1;
+		}
+	}
+
+	value = reg_r(sd, R51x_I2C_DATA);
+
+	PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
+
+	/* This is needed to make i2c_w() work */
+	rc = reg_w(sd, R511_I2C_CTL, 0x05);
+	if (rc < 0)
+		return rc;
+
+	return value;
+}
 
 /*
  * The OV518 I2C I/O procedure is different, hence, this function.
  * This is normally only called from i2c_w(). Note that this function
  * always succeeds regardless of whether the sensor is present and working.
  */
-static int i2c_w(struct sd *sd,
+static int ov518_i2c_w(struct sd *sd,
 		__u8 reg,
 		__u8 value)
 {
@@ -1040,7 +1301,7 @@ static int i2c_w(struct sd *sd,
  * This is normally only called from i2c_r(). Note that this function
  * always succeeds regardless of whether the sensor is present and working.
  */
-static int i2c_r(struct sd *sd, __u8 reg)
+static int ov518_i2c_r(struct sd *sd, __u8 reg)
 {
 	int rc, value;
 
@@ -1063,6 +1324,34 @@ static int i2c_r(struct sd *sd, __u8 reg)
 	return value;
 }
 
+static int i2c_w(struct sd *sd, __u8 reg, __u8 value)
+{
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		return ov511_i2c_w(sd, reg, value);
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+	case BRIDGE_OV519:
+		return ov518_i2c_w(sd, reg, value);
+	}
+	return -1; /* Should never happen */
+}
+
+static int i2c_r(struct sd *sd, __u8 reg)
+{
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		return ov511_i2c_r(sd, reg);
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+	case BRIDGE_OV519:
+		return ov518_i2c_r(sd, reg);
+	}
+	return -1; /* Should never happen */
+}
+
 /* Writes bits at positions specified by mask to an I2C reg. Bits that are in
  * the same position as 1's in "mask" are cleared and set to "value". Bits
  * that are in the same position as 0's in "mask" are preserved, regardless
@@ -1242,7 +1531,6 @@ static int ov8xx0_configure(struct sd *sd)
 	}
 
 	/* Set sensor-specific vars */
-/*	sd->sif = 0;		already done */
 	return 0;
 }
 
@@ -1279,15 +1567,13 @@ static int ov7xx0_configure(struct sd *sd)
 		}
 	} else if ((rc & 3) == 1) {
 		/* I don't know what's different about the 76BE yet. */
-		if (i2c_r(sd, 0x15) & 1)
+		if (i2c_r(sd, 0x15) & 1) {
 			PDEBUG(D_PROBE, "Sensor is an OV7620AE");
-		else
+			sd->sensor = SEN_OV7620;
+		} else {
 			PDEBUG(D_PROBE, "Sensor is an OV76BE");
-
-		/* OV511+ will return all zero isoc data unless we
-		 * configure the sensor as a 7620. Someone needs to
-		 * find the exact reg. setting that causes this. */
-		sd->sensor = SEN_OV76BE;
+			sd->sensor = SEN_OV76BE;
+		}
 	} else if ((rc & 3) == 0) {
 		/* try to read product id registers */
 		high = i2c_r(sd, 0x0a);
@@ -1333,7 +1619,6 @@ static int ov7xx0_configure(struct sd *sd)
 	}
 
 	/* Set sensor-specific vars */
-/*	sd->sif = 0;		already done */
 	return 0;
 }
 
@@ -1362,13 +1647,14 @@ static int ov6xx0_configure(struct sd *sd)
 		break;
 	case 0x01:
 		sd->sensor = SEN_OV6620;
+		PDEBUG(D_PROBE, "Sensor is an OV6620");
 		break;
 	case 0x02:
 		sd->sensor = SEN_OV6630;
 		PDEBUG(D_PROBE, "Sensor is an OV66308AE");
 		break;
 	case 0x03:
-		sd->sensor = SEN_OV6630;
+		sd->sensor = SEN_OV66308AF;
 		PDEBUG(D_PROBE, "Sensor is an OV66308AF");
 		break;
 	case 0x90:
@@ -1391,6 +1677,9 @@ static int ov6xx0_configure(struct sd *sd)
 /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */
 static void ov51x_led_control(struct sd *sd, int on)
 {
+	if (sd->invert_led)
+		on = !on;
+
 	switch (sd->bridge) {
 	/* OV511 has no LED control */
 	case BRIDGE_OV511PLUS:
@@ -1406,9 +1695,31 @@ static void ov51x_led_control(struct sd *sd, int on)
 	}
 }
 
-/* OV518 quantization tables are 8x4 (instead of 8x8) */
-static int ov518_upload_quan_tables(struct sd *sd)
+static int ov51x_upload_quan_tables(struct sd *sd)
 {
+	const unsigned char yQuanTable511[] = {
+		0, 1, 1, 2, 2, 3, 3, 4,
+		1, 1, 1, 2, 2, 3, 4, 4,
+		1, 1, 2, 2, 3, 4, 4, 4,
+		2, 2, 2, 3, 4, 4, 4, 4,
+		2, 2, 3, 4, 4, 5, 5, 5,
+		3, 3, 4, 4, 5, 5, 5, 5,
+		3, 4, 4, 4, 5, 5, 5, 5,
+		4, 4, 4, 4, 5, 5, 5, 5
+	};
+
+	const unsigned char uvQuanTable511[] = {
+		0, 2, 2, 3, 4, 4, 4, 4,
+		2, 2, 2, 4, 4, 4, 4, 4,
+		2, 2, 3, 4, 4, 4, 4, 4,
+		3, 4, 4, 4, 4, 4, 4, 4,
+		4, 4, 4, 4, 4, 4, 4, 4,
+		4, 4, 4, 4, 4, 4, 4, 4,
+		4, 4, 4, 4, 4, 4, 4, 4,
+		4, 4, 4, 4, 4, 4, 4, 4
+	};
+
+	/* OV518 quantization tables are 8x4 (instead of 8x8) */
 	const unsigned char yQuanTable518[] = {
 		5, 4, 5, 6, 6, 7, 7, 7,
 		5, 5, 5, 5, 6, 7, 7, 7,
@@ -1423,14 +1734,23 @@ static int ov518_upload_quan_tables(struct sd *sd)
 		7, 7, 7, 7, 7, 7, 8, 8
 	};
 
-	const unsigned char *pYTable = yQuanTable518;
-	const unsigned char *pUVTable = uvQuanTable518;
+	const unsigned char *pYTable, *pUVTable;
 	unsigned char val0, val1;
-	int i, rc, reg = R51x_COMP_LUT_BEGIN;
+	int i, size, rc, reg = R51x_COMP_LUT_BEGIN;
 
 	PDEBUG(D_PROBE, "Uploading quantization tables");
 
-	for (i = 0; i < 16; i++) {
+	if (sd->bridge == BRIDGE_OV511 || sd->bridge == BRIDGE_OV511PLUS) {
+		pYTable = yQuanTable511;
+		pUVTable = uvQuanTable511;
+		size  = 32;
+	} else {
+		pYTable = yQuanTable518;
+		pUVTable = uvQuanTable518;
+		size  = 16;
+	}
+
+	for (i = 0; i < size; i++) {
 		val0 = *pYTable++;
 		val1 = *pYTable++;
 		val0 &= 0x0f;
@@ -1445,7 +1765,7 @@ static int ov518_upload_quan_tables(struct sd *sd)
 		val0 &= 0x0f;
 		val1 &= 0x0f;
 		val0 |= val1 << 4;
-		rc = reg_w(sd, reg + 16, val0);
+		rc = reg_w(sd, reg + size, val0);
 		if (rc < 0)
 			return rc;
 
@@ -1455,6 +1775,87 @@ static int ov518_upload_quan_tables(struct sd *sd)
 	return 0;
 }
 
+/* This initializes the OV511/OV511+ and the sensor */
+static int ov511_configure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int rc;
+
+	/* For 511 and 511+ */
+	const struct ov_regvals init_511[] = {
+		{ R51x_SYS_RESET,	0x7f },
+		{ R51x_SYS_INIT,	0x01 },
+		{ R51x_SYS_RESET,	0x7f },
+		{ R51x_SYS_INIT,	0x01 },
+		{ R51x_SYS_RESET,	0x3f },
+		{ R51x_SYS_INIT,	0x01 },
+		{ R51x_SYS_RESET,	0x3d },
+	};
+
+	const struct ov_regvals norm_511[] = {
+		{ R511_DRAM_FLOW_CTL, 	0x01 },
+		{ R51x_SYS_SNAP,	0x00 },
+		{ R51x_SYS_SNAP,	0x02 },
+		{ R51x_SYS_SNAP,	0x00 },
+		{ R511_FIFO_OPTS,	0x1f },
+		{ R511_COMP_EN,		0x00 },
+		{ R511_COMP_LUT_EN,	0x03 },
+	};
+
+	const struct ov_regvals norm_511_p[] = {
+		{ R511_DRAM_FLOW_CTL,	0xff },
+		{ R51x_SYS_SNAP,	0x00 },
+		{ R51x_SYS_SNAP,	0x02 },
+		{ R51x_SYS_SNAP,	0x00 },
+		{ R511_FIFO_OPTS,	0xff },
+		{ R511_COMP_EN,		0x00 },
+		{ R511_COMP_LUT_EN,	0x03 },
+	};
+
+	const struct ov_regvals compress_511[] = {
+		{ 0x70, 0x1f },
+		{ 0x71, 0x05 },
+		{ 0x72, 0x06 },
+		{ 0x73, 0x06 },
+		{ 0x74, 0x14 },
+		{ 0x75, 0x03 },
+		{ 0x76, 0x04 },
+		{ 0x77, 0x04 },
+	};
+
+	PDEBUG(D_PROBE, "Device custom id %x", reg_r(sd, R51x_SYS_CUST_ID));
+
+	rc = write_regvals(sd, init_511, ARRAY_SIZE(init_511));
+	if (rc < 0)
+		return rc;
+
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+		rc = write_regvals(sd, norm_511, ARRAY_SIZE(norm_511));
+		if (rc < 0)
+			return rc;
+		break;
+	case BRIDGE_OV511PLUS:
+		rc = write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p));
+		if (rc < 0)
+			return rc;
+		break;
+	}
+
+	/* Init compression */
+	rc = write_regvals(sd, compress_511, ARRAY_SIZE(compress_511));
+	if (rc < 0)
+		return rc;
+
+	rc = ov51x_upload_quan_tables(sd);
+	if (rc < 0) {
+		PDEBUG(D_ERR, "Error uploading quantization tables");
+		return rc;
+	}
+
+	return 0;
+}
+
 /* This initializes the OV518/OV518+ and the sensor */
 static int ov518_configure(struct gspca_dev *gspca_dev)
 {
@@ -1462,7 +1863,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 	int rc;
 
 	/* For 518 and 518+ */
-	static struct ov_regvals init_518[] = {
+	const struct ov_regvals init_518[] = {
 		{ R51x_SYS_RESET,	0x40 },
 		{ R51x_SYS_INIT,	0xe1 },
 		{ R51x_SYS_RESET,	0x3e },
@@ -1473,7 +1874,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 		{ 0x5d,			0x03 },
 	};
 
-	static struct ov_regvals norm_518[] = {
+	const struct ov_regvals norm_518[] = {
 		{ R51x_SYS_SNAP,	0x02 }, /* Reset */
 		{ R51x_SYS_SNAP,	0x01 }, /* Enable */
 		{ 0x31, 		0x0f },
@@ -1486,7 +1887,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 		{ 0x2f,			0x80 },
 	};
 
-	static struct ov_regvals norm_518_p[] = {
+	const struct ov_regvals norm_518_p[] = {
 		{ R51x_SYS_SNAP,	0x02 }, /* Reset */
 		{ R51x_SYS_SNAP,	0x01 }, /* Enable */
 		{ 0x31, 		0x0f },
@@ -1531,7 +1932,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 		break;
 	}
 
-	rc = ov518_upload_quan_tables(sd);
+	rc = ov51x_upload_quan_tables(sd);
 	if (rc < 0) {
 		PDEBUG(D_ERR, "Error uploading quantization tables");
 		return rc;
@@ -1573,9 +1974,14 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct cam *cam;
 	int ret = 0;
 
-	sd->bridge = id->driver_info;
+	sd->bridge = id->driver_info & BRIDGE_MASK;
+	sd->invert_led = id->driver_info & BRIDGE_INVERT_LED;
 
 	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		ret = ov511_configure(gspca_dev);
+		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
 		ret = ov518_configure(gspca_dev);
@@ -1634,6 +2040,16 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	cam = &gspca_dev->cam;
 	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		if (!sd->sif) {
+			cam->cam_mode = ov511_vga_mode;
+			cam->nmodes = ARRAY_SIZE(ov511_vga_mode);
+		} else {
+			cam->cam_mode = ov511_sif_mode;
+			cam->nmodes = ARRAY_SIZE(ov511_sif_mode);
+		}
+		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
 		if (!sd->sif) {
@@ -1655,13 +2071,28 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		break;
 	}
 	sd->brightness = BRIGHTNESS_DEF;
-	sd->contrast = CONTRAST_DEF;
+	if (sd->sensor == SEN_OV6630 || sd->sensor == SEN_OV66308AF)
+		sd->contrast = 200; /* The default is too low for the ov6630 */
+	else
+		sd->contrast = CONTRAST_DEF;
 	sd->colors = COLOR_DEF;
 	sd->hflip = HFLIP_DEF;
 	sd->vflip = VFLIP_DEF;
-	if (sd->sensor != SEN_OV7670)
-		gspca_dev->ctrl_dis = (1 << HFLIP_IDX)
-					| (1 << VFLIP_IDX);
+	sd->autobrightness = AUTOBRIGHT_DEF;
+	if (sd->sensor == SEN_OV7670) {
+		sd->freq = OV7670_FREQ_DEF;
+		gspca_dev->ctrl_dis = 1 << FREQ_IDX;
+	} else {
+		sd->freq = FREQ_DEF;
+		gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) |
+				      (1 << OV7670_FREQ_IDX);
+	}
+	if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
+		gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX;
+	/* OV8610 Frequency filter control should work but needs testing */
+	if (sd->sensor == SEN_OV8610)
+		gspca_dev->ctrl_dis |= 1 << FREQ_IDX;
+
 	return 0;
 error:
 	PDEBUG(D_ERR, "OV519 Config failed");
@@ -1680,6 +2111,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			return -EIO;
 		break;
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
 			return -EIO;
 		break;
@@ -1688,6 +2120,8 @@ static int sd_init(struct gspca_dev *gspca_dev)
 /*	case SEN_OV76BE: */
 		if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
 			return -EIO;
+		if (i2c_w_mask(sd, 0x0e, 0x00, 0x40))
+			return -EIO;
 		break;
 	case SEN_OV7620:
 		if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
@@ -1709,6 +2143,126 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
+/* Set up the OV511/OV511+ with the given image parameters.
+ *
+ * Do not put any sensor-specific code in here (including I2C I/O functions)
+ */
+static int ov511_mode_init_regs(struct sd *sd)
+{
+	int hsegs, vsegs, packet_size, fps, needed;
+	int interlaced = 0;
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
+
+	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+	if (!alt) {
+		PDEBUG(D_ERR, "Couldn't get altsetting");
+		return -EIO;
+	}
+
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+	reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5);
+
+	reg_w(sd, R511_CAM_UV_EN, 0x01);
+	reg_w(sd, R511_SNAP_UV_EN, 0x01);
+	reg_w(sd, R511_SNAP_OPTS, 0x03);
+
+	/* Here I'm assuming that snapshot size == image size.
+	 * I hope that's always true. --claudio
+	 */
+	hsegs = (sd->gspca_dev.width >> 3) - 1;
+	vsegs = (sd->gspca_dev.height >> 3) - 1;
+
+	reg_w(sd, R511_CAM_PXCNT, hsegs);
+	reg_w(sd, R511_CAM_LNCNT, vsegs);
+	reg_w(sd, R511_CAM_PXDIV, 0x00);
+	reg_w(sd, R511_CAM_LNDIV, 0x00);
+
+	/* YUV420, low pass filter on */
+	reg_w(sd, R511_CAM_OPTS, 0x03);
+
+	/* Snapshot additions */
+	reg_w(sd, R511_SNAP_PXCNT, hsegs);
+	reg_w(sd, R511_SNAP_LNCNT, vsegs);
+	reg_w(sd, R511_SNAP_PXDIV, 0x00);
+	reg_w(sd, R511_SNAP_LNDIV, 0x00);
+
+	/******** Set the framerate ********/
+	if (frame_rate > 0)
+		sd->frame_rate = frame_rate;
+
+	switch (sd->sensor) {
+	case SEN_OV6620:
+		/* No framerate control, doesn't like higher rates yet */
+		sd->clockdiv = 3;
+		break;
+
+	/* Note once the FIXME's in mode_init_ov_sensor_regs() are fixed
+	   for more sensors we need to do this for them too */
+	case SEN_OV7620:
+	case SEN_OV7640:
+	case SEN_OV76BE:
+		if (sd->gspca_dev.width == 320)
+			interlaced = 1;
+		/* Fall through */
+	case SEN_OV6630:
+	case SEN_OV7610:
+	case SEN_OV7670:
+		switch (sd->frame_rate) {
+		case 30:
+		case 25:
+			/* Not enough bandwidth to do 640x480 @ 30 fps */
+			if (sd->gspca_dev.width != 640) {
+				sd->clockdiv = 0;
+				break;
+			}
+			/* Fall through for 640x480 case */
+		default:
+/*		case 20: */
+/*		case 15: */
+			sd->clockdiv = 1;
+			break;
+		case 10:
+			sd->clockdiv = 2;
+			break;
+		case 5:
+			sd->clockdiv = 5;
+			break;
+		}
+		if (interlaced) {
+			sd->clockdiv = (sd->clockdiv + 1) * 2 - 1;
+			/* Higher then 10 does not work */
+			if (sd->clockdiv > 10)
+				sd->clockdiv = 10;
+		}
+		break;
+
+	case SEN_OV8610:
+		/* No framerate control ?? */
+		sd->clockdiv = 0;
+		break;
+	}
+
+	/* Check if we have enough bandwidth to disable compression */
+	fps = (interlaced ? 60 : 30) / (sd->clockdiv + 1) + 1;
+	needed = fps * sd->gspca_dev.width * sd->gspca_dev.height * 3 / 2;
+	/* 1400 is a conservative estimate of the max nr of isoc packets/sec */
+	if (needed > 1400 * packet_size) {
+		/* Enable Y and UV quantization and compression */
+		reg_w(sd, R511_COMP_EN, 0x07);
+		reg_w(sd, R511_COMP_LUT_EN, 0x03);
+	} else {
+		reg_w(sd, R511_COMP_EN, 0x06);
+		reg_w(sd, R511_COMP_LUT_EN, 0x00);
+	}
+
+	reg_w(sd, R51x_SYS_RESET, OV511_RESET_OMNICE);
+	reg_w(sd, R51x_SYS_RESET, 0);
+
+	return 0;
+}
+
 /* Sets up the OV518/OV518+ with the given image parameters
  *
  * OV518 needs a completely different approach, until we can figure out what
@@ -1718,7 +2272,19 @@ static int sd_init(struct gspca_dev *gspca_dev)
  */
 static int ov518_mode_init_regs(struct sd *sd)
 {
-	int hsegs, vsegs;
+	int hsegs, vsegs, packet_size;
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
+
+	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+	if (!alt) {
+		PDEBUG(D_ERR, "Couldn't get altsetting");
+		return -EIO;
+	}
+
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+	ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
 
 	/******** Set the mode ********/
 
@@ -1755,20 +2321,30 @@ static int ov518_mode_init_regs(struct sd *sd)
 	/* Windows driver does this here; who knows why */
 	reg_w(sd, 0x2f, 0x80);
 
-	/******** Set the framerate (to 30 FPS) ********/
-	if (sd->bridge == BRIDGE_OV518PLUS)
-		sd->clockdiv = 1;
-	else
-		sd->clockdiv = 0;
+	/******** Set the framerate  ********/
+	sd->clockdiv = 1;
 
 	/* Mode independent, but framerate dependent, regs */
-	reg_w(sd, 0x51, 0x04);	/* Clock divider; lower==faster */
+	/* 0x51: Clock divider; Only works on some cams which use 2 crystals */
+	reg_w(sd, 0x51, 0x04);
 	reg_w(sd, 0x22, 0x18);
 	reg_w(sd, 0x23, 0xff);
 
-	if (sd->bridge == BRIDGE_OV518PLUS)
-		reg_w(sd, 0x21, 0x19);
-	else
+	if (sd->bridge == BRIDGE_OV518PLUS) {
+		switch (sd->sensor) {
+		case SEN_OV7620:
+			if (sd->gspca_dev.width == 320) {
+				reg_w(sd, 0x20, 0x00);
+				reg_w(sd, 0x21, 0x19);
+			} else {
+				reg_w(sd, 0x20, 0x60);
+				reg_w(sd, 0x21, 0x1f);
+			}
+			break;
+		default:
+			reg_w(sd, 0x21, 0x19);
+		}
+	} else
 		reg_w(sd, 0x71, 0x17);	/* Compression-related? */
 
 	/* FIXME: Sensor-specific */
@@ -1879,7 +2455,11 @@ static int ov519_mode_init_regs(struct sd *sd)
 
 	reg_w(sd, OV519_R10_H_SIZE,	sd->gspca_dev.width >> 4);
 	reg_w(sd, OV519_R11_V_SIZE,	sd->gspca_dev.height >> 3);
-	reg_w(sd, OV519_R12_X_OFFSETL,	0x00);
+	if (sd->sensor == SEN_OV7670 &&
+	    sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv)
+		reg_w(sd, OV519_R12_X_OFFSETL, 0x04);
+	else
+		reg_w(sd, OV519_R12_X_OFFSETL, 0x00);
 	reg_w(sd, OV519_R13_X_OFFSETH,	0x00);
 	reg_w(sd, OV519_R14_Y_OFFSETL,	0x00);
 	reg_w(sd, OV519_R15_Y_OFFSETH,	0x00);
@@ -1971,7 +2551,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 	int qvga;
 
 	gspca_dev = &sd->gspca_dev;
-	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
 
 	/******** Mode (VGA/QVGA) and sensor specific regs ********/
 	switch (sd->sensor) {
@@ -1983,21 +2563,16 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		break;
 	case SEN_OV7620:
-/*		i2c_w(sd, 0x2b, 0x00); */
+	case SEN_OV76BE:
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
 		i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a);
 		i2c_w(sd, 0x25, qvga ? 0x30 : 0x60);
 		i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
-		i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
+		i2c_w_mask(sd, 0x67, qvga ? 0xb0 : 0x90, 0xf0);
 		i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
 		break;
-	case SEN_OV76BE:
-/*		i2c_w(sd, 0x2b, 0x00); */
-		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
-		break;
 	case SEN_OV7640:
-/*		i2c_w(sd, 0x2b, 0x00); */
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
 /*		i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); */
@@ -2016,6 +2591,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		break;
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		break;
 	default:
@@ -2023,10 +2599,6 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 	}
 
 	/******** Palette-specific regs ********/
-	if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) {
-		/* not valid on the OV6620/OV7620/6630? */
-		i2c_w_mask(sd, 0x0e, 0x00, 0x40);
-	}
 
 	/* The OV518 needs special treatment. Although both the OV518
 	 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
@@ -2036,25 +2608,12 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 
 	/* OV7640 is 8-bit only */
 
-	if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640)
+	if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV66308AF &&
+					sd->sensor != SEN_OV7640)
 		i2c_w_mask(sd, 0x13, 0x00, 0x20);
 
 	/******** Clock programming ********/
-	/* The OV6620 needs special handling. This prevents the
-	 * severe banding that normally occurs */
-	if (sd->sensor == SEN_OV6620) {
-
-		/* Clock down */
-		i2c_w(sd, 0x2a, 0x04);
-		i2c_w(sd, 0x11, sd->clockdiv);
-		i2c_w(sd, 0x2a, 0x84);
-		/* This next setting is critical. It seems to improve
-		 * the gain or the contrast. The "reserved" bits seem
-		 * to have some effect in this case. */
-		i2c_w(sd, 0x2d, 0x85);
-	} else {
-		i2c_w(sd, 0x11, sd->clockdiv);
-	}
+	i2c_w(sd, 0x11, sd->clockdiv);
 
 	/******** Special Features ********/
 /* no evidence this is possible with OV7670, either */
@@ -2098,13 +2657,14 @@ static void sethvflip(struct sd *sd)
 static int set_ov_sensor_window(struct sd *sd)
 {
 	struct gspca_dev *gspca_dev;
-	int qvga;
+	int qvga, crop;
 	int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale;
 	int ret, hstart, hstop, vstop, vstart;
 	__u8 v;
 
 	gspca_dev = &sd->gspca_dev;
-	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
+	crop = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 2;
 
 	/* The different sensor ICs handle setting up of window differently.
 	 * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */
@@ -2123,14 +2683,19 @@ static int set_ov_sensor_window(struct sd *sd)
 		break;
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		hwsbase = 0x38;
 		hwebase = 0x3a;
 		vwsbase = 0x05;
 		vwebase = 0x06;
-		if (qvga) {
+		if (sd->sensor == SEN_OV66308AF && qvga)
 			/* HDG: this fixes U and V getting swapped */
-			hwsbase--;
-			vwsbase--;
+			hwsbase++;
+		if (crop) {
+			hwsbase += 8;
+			hwebase += 8;
+			vwsbase += 11;
+			vwebase += 11;
 		}
 		break;
 	case SEN_OV7620:
@@ -2155,6 +2720,7 @@ static int set_ov_sensor_window(struct sd *sd)
 	switch (sd->sensor) {
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		if (qvga) {		/* QCIF */
 			hwscale = 0;
 			vwscale = 0;
@@ -2207,7 +2773,7 @@ static int set_ov_sensor_window(struct sd *sd)
 		if (qvga) {		/* QVGA from ov7670.c by
 					 * Jonathan Corbet */
 			hstart = 164;
-			hstop = 20;
+			hstop = 28;
 			vstart = 14;
 			vstop = 494;
 		} else {		/* VGA */
@@ -2233,7 +2799,6 @@ static int set_ov_sensor_window(struct sd *sd)
 		msleep(10);	/* need to sleep between read and write to
 				 * same reg! */
 		i2c_w(sd, OV7670_REG_VREF, v);
-		sethvflip(sd);
 	} else {
 		i2c_w(sd, 0x17, hwsbase);
 		i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale));
@@ -2250,6 +2815,10 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	int ret = 0;
 
 	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		ret = ov511_mode_init_regs(sd);
+		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
 		ret = ov518_mode_init_regs(sd);
@@ -2268,6 +2837,9 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	setcontrast(gspca_dev);
 	setbrightness(gspca_dev);
 	setcolors(gspca_dev);
+	sethvflip(sd);
+	setautobrightness(sd);
+	setfreq(sd);
 
 	ret = ov51x_restart(sd);
 	if (ret < 0)
@@ -2287,23 +2859,88 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	ov51x_led_control(sd, 0);
 }
 
-static void ov518_pkt_scan(struct gspca_dev *gspca_dev,
+static void ov511_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
-			__u8 *data,			/* isoc packet */
+			__u8 *in,			/* isoc packet */
 			int len)			/* iso packet length */
 {
-	PDEBUG(D_STREAM, "ov518_pkt_scan: %d bytes", len);
+	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (len & 7) {
-		len--;
-		PDEBUG(D_STREAM, "packet number: %d\n", (int)data[len]);
+	/* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th
+	 * byte non-zero. The EOF packet has image width/height in the
+	 * 10th and 11th bytes. The 9th byte is given as follows:
+	 *
+	 * bit 7: EOF
+	 *     6: compression enabled
+	 *     5: 422/420/400 modes
+	 *     4: 422/420/400 modes
+	 *     3: 1
+	 *     2: snapshot button on
+	 *     1: snapshot frame
+	 *     0: even/odd field
+	 */
+	if (!(in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) &&
+	    (in[8] & 0x08)) {
+		if (in[8] & 0x80) {
+			/* Frame end */
+			if ((in[9] + 1) * 8 != gspca_dev->width ||
+			    (in[10] + 1) * 8 != gspca_dev->height) {
+				PDEBUG(D_ERR, "Invalid frame size, got: %dx%d,"
+					" requested: %dx%d\n",
+					(in[9] + 1) * 8, (in[10] + 1) * 8,
+					gspca_dev->width, gspca_dev->height);
+				gspca_dev->last_packet_type = DISCARD_PACKET;
+				return;
+			}
+			/* Add 11 byte footer to frame, might be usefull */
+			gspca_frame_add(gspca_dev, LAST_PACKET, frame, in, 11);
+			return;
+		} else {
+			/* Frame start */
+			gspca_frame_add(gspca_dev, FIRST_PACKET, frame, in, 0);
+			sd->packet_nr = 0;
+		}
 	}
 
+	/* Ignore the packet number */
+	len--;
+
+	/* intermediate packet */
+	gspca_frame_add(gspca_dev, INTER_PACKET, frame, in, len);
+}
+
+static void ov518_pkt_scan(struct gspca_dev *gspca_dev,
+			struct gspca_frame *frame,	/* target */
+			__u8 *data,			/* isoc packet */
+			int len)			/* iso packet length */
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
 	/* A false positive here is likely, until OVT gives me
 	 * the definitive SOF/EOF format */
 	if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) {
 		gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0);
 		gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0);
+		sd->packet_nr = 0;
+	}
+
+	if (gspca_dev->last_packet_type == DISCARD_PACKET)
+		return;
+
+	/* Does this device use packet numbers ? */
+	if (len & 7) {
+		len--;
+		if (sd->packet_nr == data[len])
+			sd->packet_nr++;
+		/* The last few packets of the frame (which are all 0's
+		   except that they may contain part of the footer), are
+		   numbered 0 */
+		else if (sd->packet_nr == 0 || data[len]) {
+			PDEBUG(D_ERR, "Invalid packet nr: %d (expect: %d)",
+				(int)data[len], (int)sd->packet_nr);
+			gspca_dev->last_packet_type = DISCARD_PACKET;
+			return;
+		}
 	}
 
 	/* intermediate packet */
@@ -2364,6 +3001,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
+		ov511_pkt_scan(gspca_dev, frame, data, len);
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
@@ -2389,13 +3027,13 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 	case SEN_OV76BE:
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 	case SEN_OV7640:
 		i2c_w(sd, OV7610_REG_BRT, val);
 		break;
 	case SEN_OV7620:
 		/* 7620 doesn't like manual changes when in auto mode */
-/*fixme
- *		if (!sd->auto_brt) */
+		if (!sd->autobrightness)
 			i2c_w(sd, OV7610_REG_BRT, val);
 		break;
 	case SEN_OV7670:
@@ -2418,6 +3056,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		i2c_w(sd, OV7610_REG_CNT, val);
 		break;
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		i2c_w_mask(sd, OV7610_REG_CNT, val >> 4, 0x0f);
 		break;
 	case SEN_OV8610: {
@@ -2462,6 +3101,7 @@ static void setcolors(struct gspca_dev *gspca_dev)
 	case SEN_OV76BE:
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		i2c_w(sd, OV7610_REG_SAT, val);
 		break;
 	case SEN_OV7620:
@@ -2482,6 +3122,72 @@ static void setcolors(struct gspca_dev *gspca_dev)
 	}
 }
 
+static void setautobrightness(struct sd *sd)
+{
+	if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
+		return;
+
+	i2c_w_mask(sd, 0x2d, sd->autobrightness ? 0x10 : 0x00, 0x10);
+}
+
+static void setfreq(struct sd *sd)
+{
+	if (sd->sensor == SEN_OV7670) {
+		switch (sd->freq) {
+		case 0: /* Banding filter disabled */
+			i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_BFILT);
+			break;
+		case 1: /* 50 hz */
+			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+				   OV7670_COM8_BFILT);
+			i2c_w_mask(sd, OV7670_REG_COM11, 0x08, 0x18);
+			break;
+		case 2: /* 60 hz */
+			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+				   OV7670_COM8_BFILT);
+			i2c_w_mask(sd, OV7670_REG_COM11, 0x00, 0x18);
+			break;
+		case 3: /* Auto hz */
+			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+				   OV7670_COM8_BFILT);
+			i2c_w_mask(sd, OV7670_REG_COM11, OV7670_COM11_HZAUTO,
+				   0x18);
+			break;
+		}
+	} else {
+		switch (sd->freq) {
+		case 0: /* Banding filter disabled */
+			i2c_w_mask(sd, 0x2d, 0x00, 0x04);
+			i2c_w_mask(sd, 0x2a, 0x00, 0x80);
+			break;
+		case 1: /* 50 hz (filter on and framerate adj) */
+			i2c_w_mask(sd, 0x2d, 0x04, 0x04);
+			i2c_w_mask(sd, 0x2a, 0x80, 0x80);
+			/* 20 fps -> 16.667 fps */
+			if (sd->sensor == SEN_OV6620 ||
+			    sd->sensor == SEN_OV6630 ||
+			    sd->sensor == SEN_OV66308AF)
+				i2c_w(sd, 0x2b, 0x5e);
+			else
+				i2c_w(sd, 0x2b, 0xac);
+			break;
+		case 2: /* 60 hz (filter on, ...) */
+			i2c_w_mask(sd, 0x2d, 0x04, 0x04);
+			if (sd->sensor == SEN_OV6620 ||
+			    sd->sensor == SEN_OV6630 ||
+			    sd->sensor == SEN_OV66308AF) {
+				/* 20 fps -> 15 fps */
+				i2c_w_mask(sd, 0x2a, 0x80, 0x80);
+				i2c_w(sd, 0x2b, 0xa8);
+			} else {
+				/* no framerate adj. */
+				i2c_w_mask(sd, 0x2a, 0x00, 0x80);
+			}
+			break;
+		}
+	}
+}
+
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -2572,6 +3278,71 @@ static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->autobrightness = val;
+	if (gspca_dev->streaming)
+		setautobrightness(sd);
+	return 0;
+}
+
+static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->autobrightness;
+	return 0;
+}
+
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->freq = val;
+	if (gspca_dev->streaming)
+		setfreq(sd);
+	return 0;
+}
+
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->freq;
+	return 0;
+}
+
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+			struct v4l2_querymenu *menu)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	switch (menu->id) {
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+		switch (menu->index) {
+		case 0:		/* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */
+			strcpy((char *) menu->name, "NoFliker");
+			return 0;
+		case 1:		/* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
+			strcpy((char *) menu->name, "50 Hz");
+			return 0;
+		case 2:		/* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
+			strcpy((char *) menu->name, "60 Hz");
+			return 0;
+		case 3:
+			if (sd->sensor != SEN_OV7670)
+				return -EINVAL;
+
+			strcpy((char *) menu->name, "Automatic");
+			return 0;
+		}
+		break;
+	}
+	return -EINVAL;
+}
+
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
@@ -2582,6 +3353,7 @@ static const struct sd_desc sd_desc = {
 	.start = sd_start,
 	.stopN = sd_stopN,
 	.pkt_scan = sd_pkt_scan,
+	.querymenu = sd_querymenu,
 };
 
 /* -- module initialisation -- */
@@ -2590,17 +3362,22 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
-	{USB_DEVICE(0x041e, 0x4064), .driver_info = BRIDGE_OV519 },
-	{USB_DEVICE(0x041e, 0x4068), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x4064),
+	 .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+	{USB_DEVICE(0x041e, 0x4068),
+	 .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
 	{USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 },
 	{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
 	{USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0xa511), .driver_info = BRIDGE_OV511PLUS },
 	{USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS },
+	{USB_DEVICE(0x0813, 0x0002), .driver_info = BRIDGE_OV511PLUS },
 	{}
 };
 
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index dc6a6f11354a..0d02f41fa7d0 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -46,6 +46,7 @@ struct sd {
 	u8 gamma;
 	u8 vflip;			/* ov7630/ov7648 only */
 	u8 infrared;			/* mt9v111 only */
+	u8 freq;			/* ov76xx only */
 	u8 quality;			/* image quality */
 #define QUALITY_MIN 60
 #define QUALITY_MAX 95
@@ -96,8 +97,11 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setinfrared(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
 	{
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
@@ -113,6 +117,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setbrightness,
 	    .get = sd_getbrightness,
 	},
+#define CONTRAST_IDX 1
 	{
 	    {
 		.id      = V4L2_CID_CONTRAST,
@@ -128,20 +133,22 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setcontrast,
 	    .get = sd_getcontrast,
 	},
+#define COLOR_IDX 2
 	{
 	    {
 		.id      = V4L2_CID_SATURATION,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
-		.name    = "Color",
+		.name    = "Saturation",
 		.minimum = 0,
 		.maximum = 40,
 		.step    = 1,
-#define COLOR_DEF 32
+#define COLOR_DEF 25
 		.default_value = COLOR_DEF,
 	    },
 	    .set = sd_setcolors,
 	    .get = sd_getcolors,
 	},
+#define BLUE_BALANCE_IDX 3
 	{
 	    {
 		.id      = V4L2_CID_BLUE_BALANCE,
@@ -156,6 +163,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setblue_balance,
 	    .get = sd_getblue_balance,
 	},
+#define RED_BALANCE_IDX 4
 	{
 	    {
 		.id      = V4L2_CID_RED_BALANCE,
@@ -170,6 +178,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setred_balance,
 	    .get = sd_getred_balance,
 	},
+#define GAMMA_IDX 5
 	{
 	    {
 		.id      = V4L2_CID_GAMMA,
@@ -184,7 +193,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setgamma,
 	    .get = sd_getgamma,
 	},
-#define AUTOGAIN_IDX 5
+#define AUTOGAIN_IDX 6
 	{
 	    {
 		.id      = V4L2_CID_AUTOGAIN,
@@ -200,7 +209,7 @@ static struct ctrl sd_ctrls[] = {
 	    .get = sd_getautogain,
 	},
 /* ov7630/ov7648 only */
-#define VFLIP_IDX 6
+#define VFLIP_IDX 7
 	{
 	    {
 		.id      = V4L2_CID_VFLIP,
@@ -209,14 +218,14 @@ static struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 1,
 		.step    = 1,
-#define VFLIP_DEF 0			/* vflip def = 1 for ov7630 */
+#define VFLIP_DEF 0
 		.default_value = VFLIP_DEF,
 	    },
 	    .set = sd_setvflip,
 	    .get = sd_getvflip,
 	},
 /* mt9v111 only */
-#define INFRARED_IDX 7
+#define INFRARED_IDX 8
 	{
 	    {
 		.id      = V4L2_CID_INFRARED,
@@ -231,28 +240,44 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setinfrared,
 	    .get = sd_getinfrared,
 	},
+/* ov7630/ov7648/ov7660 only */
+#define FREQ_IDX 9
+	{
+	    {
+		.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
+		.type    = V4L2_CTRL_TYPE_MENU,
+		.name    = "Light frequency filter",
+		.minimum = 0,
+		.maximum = 2,	/* 0: 0, 1: 50Hz, 2:60Hz */
+		.step    = 1,
+#define FREQ_DEF 2
+		.default_value = FREQ_DEF,
+	    },
+	    .set = sd_setfreq,
+	    .get = sd_getfreq,
+	},
 };
 
 /* table of the disabled controls */
 static __u32 ctrl_dis[] = {
-	(1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+	(1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
 						/* SENSOR_HV7131R 0 */
-	(1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+	(1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
 						/* SENSOR_MI0360 1 */
-	(1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+	(1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
 						/* SENSOR_MO4000 2 */
-	(1 << VFLIP_IDX),
+	(1 << VFLIP_IDX) | (1 << FREQ_IDX),
 						/* SENSOR_MT9V111 3 */
-	(1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+	(1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
 						/* SENSOR_OM6802 4 */
-	(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX),
+	(1 << INFRARED_IDX),
 						/* SENSOR_OV7630 5 */
 	(1 << INFRARED_IDX),
 						/* SENSOR_OV7648 6 */
 	(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
 						/* SENSOR_OV7660 7 */
-	(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
-						/* SENSOR_SP80708 8 */
+	(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX) |
+			      (1 << FREQ_IDX),	/* SENSOR_SP80708 8 */
 };
 
 static const struct v4l2_pix_format vga_mode[] = {
@@ -268,7 +293,8 @@ static const struct v4l2_pix_format vga_mode[] = {
 		.priv = 1},
 	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 640,
-		.sizeimage = 640 * 480 * 3 / 8 + 590,
+		/* Note 3 / 8 is not large enough, not even 5 / 8 is ?! */
+		.sizeimage = 640 * 480 * 3 / 4 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
@@ -604,7 +630,9 @@ static const u8 ov7630_sensor_init[][8] = {
 /* win: i2c_r from 00 to 80 */
 	{0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10},
 	{0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10},
-	{0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10},
+/* HDG: 0x11 was 0x00 change to 0x01 for better exposure (15 fps instead of 30)
+	0x13 was 0xc0 change to 0xc3 for auto gain and exposure */
+	{0xd1, 0x21, 0x11, 0x01, 0x48, 0xc3, 0x00, 0x10},
 	{0xb1, 0x21, 0x15, 0x80, 0x03, 0x00, 0x00, 0x10},
 	{0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10},
 	{0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10},
@@ -638,9 +666,8 @@ static const u8 ov7630_sensor_init[][8] = {
 	{0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10},
 /* */
-	{0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10},
-	{0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10},
+/*	{0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */
+/*	{0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */
 /* */
 	{0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10},
 /*	{0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, */
@@ -673,7 +700,7 @@ static const u8 ov7648_sensor_init[][8] = {
 	{0xd1, 0x21, 0x21, 0x86, 0x00, 0xde, 0xa0, 0x10},
 /*	{0xd1, 0x21, 0x25, 0x80, 0x32, 0xfe, 0xa0, 0x10}, jfm done */
 /*	{0xd1, 0x21, 0x29, 0x00, 0x91, 0x00, 0x88, 0x10}, jfm done */
-	{0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10},
+/*	{0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10}, set by setfreq */
 /*...*/
 /*	{0xa1, 0x21, 0x12, 0x08, 0x00, 0x00, 0x00, 0x10}, jfm done */
 /*	{0xa1, 0x21, 0x75, 0x06, 0x00, 0x00, 0x00, 0x10},   * COMN
@@ -1294,11 +1321,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->gamma = GAMMA_DEF;
 	sd->autogain = AUTOGAIN_DEF;
 	sd->ag_cnt = -1;
-	if (sd->sensor != SENSOR_OV7630)
-		sd->vflip = 0;
-	else
-		sd->vflip = 1;
+	sd->vflip = VFLIP_DEF;
 	sd->infrared = INFRARED_DEF;
+	sd->freq = FREQ_DEF;
 	sd->quality = QUALITY_DEF;
 	sd->jpegqual = 80;
 
@@ -1569,7 +1594,7 @@ static void setautogain(struct gspca_dev *gspca_dev)
 		else
 			comb = 0xa0;
 		if (sd->autogain)
-			comb |= 0x02;
+			comb |= 0x03;
 		i2c_w1(&sd->gspca_dev, 0x13, comb);
 		return;
 	    }
@@ -1585,12 +1610,15 @@ static void setvflip(struct sd *sd)
 {
 	u8 comn;
 
-	if (sd->sensor == SENSOR_OV7630)
+	if (sd->sensor == SENSOR_OV7630) {
 		comn = 0x02;
-	else
+		if (!sd->vflip)
+			comn |= 0x80;
+	} else {
 		comn = 0x06;
-	if (sd->vflip)
-		comn |= 0x80;
+		if (sd->vflip)
+			comn |= 0x80;
+	}
 	i2c_w1(&sd->gspca_dev, 0x75, comn);
 }
 
@@ -1602,6 +1630,58 @@ static void setinfrared(struct sd *sd)
 		sd->infrared ? 0x66 : 0x64);
 }
 
+static void setfreq(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->sensor == SENSOR_OV7660) {
+		switch (sd->freq) {
+		case 0: /* Banding filter disabled */
+			i2c_w1(gspca_dev, 0x13, 0xdf);
+			break;
+		case 1: /* 50 hz */
+			i2c_w1(gspca_dev, 0x13, 0xff);
+			i2c_w1(gspca_dev, 0x3b, 0x0a);
+			break;
+		case 2: /* 60 hz */
+			i2c_w1(gspca_dev, 0x13, 0xff);
+			i2c_w1(gspca_dev, 0x3b, 0x02);
+			break;
+		}
+	} else {
+		u8 reg2a = 0, reg2b = 0, reg2d = 0;
+
+		/* Get reg2a / reg2d base values */
+		switch (sd->sensor) {
+		case SENSOR_OV7630:
+			reg2a = 0x08;
+			reg2d = 0x01;
+			break;
+		case SENSOR_OV7648:
+			reg2a = 0x11;
+			reg2d = 0x81;
+			break;
+		}
+
+		switch (sd->freq) {
+		case 0: /* Banding filter disabled */
+			break;
+		case 1: /* 50 hz (filter on and framerate adj) */
+			reg2a |= 0x80;
+			reg2b = 0xac;
+			reg2d |= 0x04;
+			break;
+		case 2: /* 60 hz (filter on, no framerate adj) */
+			reg2a |= 0x80;
+			reg2d |= 0x04;
+			break;
+		}
+		i2c_w1(gspca_dev, 0x2a, reg2a);
+		i2c_w1(gspca_dev, 0x2b, reg2b);
+		i2c_w1(gspca_dev, 0x2d, reg2d);
+	}
+}
+
 static void setjpegqual(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -1828,6 +1908,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	setbrightness(gspca_dev);
 	setcontrast(gspca_dev);
 	setautogain(gspca_dev);
+	setfreq(gspca_dev);
 	return 0;
 }
 
@@ -2131,6 +2212,24 @@ static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->freq = val;
+	if (gspca_dev->streaming)
+		setfreq(gspca_dev);
+	return 0;
+}
+
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->freq;
+	return 0;
+}
+
 static int sd_set_jcomp(struct gspca_dev *gspca_dev,
 			struct v4l2_jpegcompression *jcomp)
 {
@@ -2159,6 +2258,27 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+			struct v4l2_querymenu *menu)
+{
+	switch (menu->id) {
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+		switch (menu->index) {
+		case 0:		/* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */
+			strcpy((char *) menu->name, "NoFliker");
+			return 0;
+		case 1:		/* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
+			strcpy((char *) menu->name, "50 Hz");
+			return 0;
+		case 2:		/* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
+			strcpy((char *) menu->name, "60 Hz");
+			return 0;
+		}
+		break;
+	}
+	return -EINVAL;
+}
+
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
@@ -2173,6 +2293,7 @@ static const struct sd_desc sd_desc = {
 	.dq_callback = do_autogain,
 	.get_jcomp = sd_get_jcomp,
 	.set_jcomp = sd_set_jcomp,
+	.querymenu = sd_querymenu,
 };
 
 /* -- module initialisation -- */
@@ -2233,7 +2354,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)},
 #endif
 	{USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)},
-/*	{USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x??)}, */
+	{USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x21)},
 	{USB_DEVICE(0x0c45, 0x6143), BSI(SN9C120, SP80708, 0x18)},
 	{}
 };
diff --git a/drivers/media/video/gspca/stv06xx/Makefile b/drivers/media/video/gspca/stv06xx/Makefile
index feeaa94ab588..2f3c3a606ce4 100644
--- a/drivers/media/video/gspca/stv06xx/Makefile
+++ b/drivers/media/video/gspca/stv06xx/Makefile
@@ -3,7 +3,8 @@ obj-$(CONFIG_USB_STV06XX) += gspca_stv06xx.o
 gspca_stv06xx-objs := stv06xx.o \
 		      stv06xx_vv6410.o \
 		      stv06xx_hdcs.o \
-		      stv06xx_pb0100.o
+		      stv06xx_pb0100.o \
+		      stv06xx_st6422.o
 
 EXTRA_CFLAGS += -Idrivers/media/video/gspca
 
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index e573c3406324..0da8e0de0456 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -92,11 +92,10 @@ static int stv06xx_write_sensor_finish(struct sd *sd)
 {
 	int err = 0;
 
-	if (IS_850(sd)) {
+	if (sd->bridge == BRIDGE_STV610) {
 		struct usb_device *udev = sd->gspca_dev.dev;
 		__u8 *buf = sd->gspca_dev.usb_buf;
 
-		/* Quickam Web needs an extra packet */
 		buf[0] = 0;
 		err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				      0x04, 0x40, 0x1704, 0, buf, 1,
@@ -253,7 +252,7 @@ static int stv06xx_init(struct gspca_dev *gspca_dev)
 
 	err = sd->sensor->init(sd);
 
-	if (dump_sensor)
+	if (dump_sensor && sd->sensor->dump)
 		sd->sensor->dump(sd);
 
 	return (err < 0) ? err : 0;
@@ -318,6 +317,8 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
 			__u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
 	PDEBUG(D_PACK, "Packet of length %d arrived", len);
 
 	/* A packet may contain several frames
@@ -343,14 +344,29 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
 		if (len < chunk_len) {
 			PDEBUG(D_ERR, "URB packet length is smaller"
 				" than the specified chunk length");
+			gspca_dev->last_packet_type = DISCARD_PACKET;
 			return;
 		}
 
+		/* First byte seem to be 02=data 2nd byte is unknown??? */
+		if (sd->bridge == BRIDGE_ST6422 && (id & 0xFF00) == 0x0200)
+			goto frame_data;
+
 		switch (id) {
 		case 0x0200:
 		case 0x4200:
+frame_data:
 			PDEBUG(D_PACK, "Frame data packet detected");
 
+			if (sd->to_skip) {
+				int skip = (sd->to_skip < chunk_len) ?
+					    sd->to_skip : chunk_len;
+				data += skip;
+				len -= skip;
+				chunk_len -= skip;
+				sd->to_skip -= skip;
+			}
+
 			gspca_frame_add(gspca_dev, INTER_PACKET, frame,
 					data, chunk_len);
 			break;
@@ -365,6 +381,9 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
 			gspca_frame_add(gspca_dev, FIRST_PACKET,
 					frame, data, 0);
 
+			if (sd->bridge == BRIDGE_ST6422)
+				sd->to_skip = gspca_dev->width * 4;
+
 			if (chunk_len)
 				PDEBUG(D_ERR, "Chunk length is "
 					      "non-zero on a SOF");
@@ -395,8 +414,12 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
 			/* Unknown chunk with 2 bytes of data,
 			   occurs 2-3 times per USB interrupt */
 			break;
+		case 0x42ff:
+			PDEBUG(D_PACK, "Chunk 0x42ff detected");
+			/* Special chunk seen sometimes on the ST6422 */
+			break;
 		default:
-			PDEBUG(D_PACK, "Unknown chunk %d detected", id);
+			PDEBUG(D_PACK, "Unknown chunk 0x%04x detected", id);
 			/* Unknown chunk */
 		}
 		data    += chunk_len;
@@ -428,11 +451,16 @@ static int stv06xx_config(struct gspca_dev *gspca_dev,
 
 	cam = &gspca_dev->cam;
 	sd->desc = sd_desc;
+	sd->bridge = id->driver_info;
 	gspca_dev->sd_desc = &sd->desc;
 
 	if (dump_bridge)
 		stv06xx_dump_bridge(sd);
 
+	sd->sensor = &stv06xx_sensor_st6422;
+	if (!sd->sensor->probe(sd))
+		return 0;
+
 	sd->sensor = &stv06xx_sensor_vv6410;
 	if (!sd->sensor->probe(sd))
 		return 0;
@@ -457,9 +485,20 @@ static int stv06xx_config(struct gspca_dev *gspca_dev,
 
 /* -- module initialisation -- */
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x046d, 0x0840)}, /* QuickCam Express */
-	{USB_DEVICE(0x046d, 0x0850)}, /* LEGO cam / QuickCam Web */
-	{USB_DEVICE(0x046d, 0x0870)}, /* Dexxa WebCam USB */
+	/* QuickCam Express */
+	{USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 },
+	/* LEGO cam / QuickCam Web */
+	{USB_DEVICE(0x046d, 0x0850), .driver_info = BRIDGE_STV610 },
+	/* Dexxa WebCam USB */
+	{USB_DEVICE(0x046d, 0x0870), .driver_info = BRIDGE_STV602 },
+	/* QuickCam Messenger */
+	{USB_DEVICE(0x046D, 0x08F0), .driver_info = BRIDGE_ST6422 },
+	/* QuickCam Communicate */
+	{USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 },
+	/* QuickCam Messenger (new) */
+	{USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 },
+	/* QuickCam Messenger (new) */
+	{USB_DEVICE(0x046D, 0x08DA), .driver_info = BRIDGE_ST6422 },
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h
index 1207e7d17f14..9df7137fe67e 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.h
@@ -93,6 +93,17 @@ struct sd {
 
 	/* Sensor private data */
 	void *sensor_priv;
+
+	/* The first 4 lines produced by the stv6422 are no good, this keeps
+	   track of how many bytes we still need to skip during a frame */
+	int to_skip;
+
+	/* Bridge / Camera type */
+	u8 bridge;
+	#define BRIDGE_STV600 0
+	#define BRIDGE_STV602 1
+	#define BRIDGE_STV610 2
+	#define BRIDGE_ST6422 3 /* With integrated sensor */
 };
 
 int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index b16903814203..3039ec208f3a 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -434,7 +434,7 @@ static int hdcs_probe_1x00(struct sd *sd)
 	hdcs->exp.er = 100;
 
 	/*
-	 * Frame rate on HDCS-1000 0x46D:0x840 depends on PSMP:
+	 * Frame rate on HDCS-1000 with STV600 depends on PSMP:
 	 *  4 = doesn't work at all
 	 *  5 = 7.8 fps,
 	 *  6 = 6.9 fps,
@@ -443,7 +443,7 @@ static int hdcs_probe_1x00(struct sd *sd)
 	 * 15 = 4.4 fps,
 	 * 31 = 2.8 fps
 	 *
-	 * Frame rate on HDCS-1000 0x46D:0x870 depends on PSMP:
+	 * Frame rate on HDCS-1000 with STV602 depends on PSMP:
 	 * 15 = doesn't work at all
 	 * 18 = doesn't work at all
 	 * 19 = 7.3 fps
@@ -453,7 +453,7 @@ static int hdcs_probe_1x00(struct sd *sd)
 	 * 24 = 6.3 fps
 	 * 30 = 5.4 fps
 	 */
-	hdcs->psmp = IS_870(sd) ? 20 : 5;
+	hdcs->psmp = (sd->bridge == BRIDGE_STV602) ? 20 : 5;
 
 	sd->sensor_priv = hdcs;
 
@@ -530,7 +530,7 @@ static int hdcs_init(struct sd *sd)
 	int i, err = 0;
 
 	/* Set the STV0602AA in STV0600 emulation mode */
-	if (IS_870(sd))
+	if (sd->bridge == BRIDGE_STV602)
 		stv06xx_write_bridge(sd, STV_STV0600_EMULATION, 1);
 
 	/* Execute the bridge init */
@@ -558,7 +558,7 @@ static int hdcs_init(struct sd *sd)
 		return err;
 
 	/* Set PGA sample duration
-	(was 0x7E for IS_870, but caused slow framerate with HDCS-1020) */
+	(was 0x7E for the STV602, but caused slow framerate with HDCS-1020) */
 	if (IS_1020(sd))
 		err = stv06xx_write_sensor(sd, HDCS_TCTRL,
 				(HDCS_ADC_START_SIG_DUR << 6) | hdcs->psmp);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
index e88c42f7d2f8..934b9cebc1ab 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
@@ -32,14 +32,13 @@
 
 #include "stv06xx.h"
 
-#define IS_850(sd)	((sd)->gspca_dev.dev->descriptor.idProduct == 0x850)
-#define IS_870(sd)	((sd)->gspca_dev.dev->descriptor.idProduct == 0x870)
 #define IS_1020(sd)	((sd)->sensor == &stv06xx_sensor_hdcs1020)
 
 extern const struct stv06xx_sensor stv06xx_sensor_vv6410;
 extern const struct stv06xx_sensor stv06xx_sensor_hdcs1x00;
 extern const struct stv06xx_sensor stv06xx_sensor_hdcs1020;
 extern const struct stv06xx_sensor stv06xx_sensor_pb0100;
+extern const struct stv06xx_sensor stv06xx_sensor_st6422;
 
 struct stv06xx_sensor {
 	/* Defines the name of a sensor */
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
new file mode 100644
index 000000000000..87cb5b9ddfa7
--- /dev/null
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
@@ -0,0 +1,453 @@
+/*
+ * Support for the sensor part which is integrated (I think) into the
+ * st6422 stv06xx alike bridge, as its integrated there are no i2c writes
+ * but instead direct bridge writes.
+ *
+ * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Strongly based on qc-usb-messenger, which is:
+ * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher
+ *		      Mark Cave-Ayland, Carlo E Prelz, Dick Streefland
+ * Copyright (c) 2002, 2003 Tuukka Toivonen
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include "stv06xx_st6422.h"
+
+static struct v4l2_pix_format st6422_mode[] = {
+	/* Note we actually get 124 lines of data, of which we skip the 4st
+	   4 as they are garbage */
+	{
+		162,
+		120,
+		V4L2_PIX_FMT_SGRBG8,
+		V4L2_FIELD_NONE,
+		.sizeimage = 162 * 120,
+		.bytesperline = 162,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1
+	},
+	/* Note we actually get 248 lines of data, of which we skip the 4st
+	   4 as they are garbage, and we tell the app it only gets the
+	   first 240 of the 244 lines it actually gets, so that it ignores
+	   the last 4. */
+	{
+		324,
+		240,
+		V4L2_PIX_FMT_SGRBG8,
+		V4L2_FIELD_NONE,
+		.sizeimage = 324 * 244,
+		.bytesperline = 324,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0
+	},
+};
+
+static const struct ctrl st6422_ctrl[] = {
+#define BRIGHTNESS_IDX 0
+	{
+		{
+			.id		= V4L2_CID_BRIGHTNESS,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "Brightness",
+			.minimum	= 0,
+			.maximum	= 31,
+			.step		= 1,
+			.default_value  = 3
+		},
+		.set = st6422_set_brightness,
+		.get = st6422_get_brightness
+	},
+#define CONTRAST_IDX 1
+	{
+		{
+			.id		= V4L2_CID_CONTRAST,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "Contrast",
+			.minimum	= 0,
+			.maximum	= 15,
+			.step		= 1,
+			.default_value  = 11
+		},
+		.set = st6422_set_contrast,
+		.get = st6422_get_contrast
+	},
+#define GAIN_IDX 2
+	{
+		{
+			.id		= V4L2_CID_GAIN,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "Gain",
+			.minimum	= 0,
+			.maximum	= 255,
+			.step		= 1,
+			.default_value  = 64
+		},
+		.set = st6422_set_gain,
+		.get = st6422_get_gain
+	},
+#define EXPOSURE_IDX 3
+	{
+		{
+			.id		= V4L2_CID_EXPOSURE,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "Exposure",
+			.minimum	= 0,
+			.maximum	= 1023,
+			.step		= 1,
+			.default_value  = 256
+		},
+		.set = st6422_set_exposure,
+		.get = st6422_get_exposure
+	},
+};
+
+static int st6422_probe(struct sd *sd)
+{
+	int i;
+	s32 *sensor_settings;
+
+	if (sd->bridge != BRIDGE_ST6422)
+		return -ENODEV;
+
+	info("st6422 sensor detected");
+
+	sensor_settings = kmalloc(ARRAY_SIZE(st6422_ctrl) * sizeof(s32),
+				  GFP_KERNEL);
+	if (!sensor_settings)
+		return -ENOMEM;
+
+	sd->gspca_dev.cam.cam_mode = st6422_mode;
+	sd->gspca_dev.cam.nmodes = ARRAY_SIZE(st6422_mode);
+	sd->desc.ctrls = st6422_ctrl;
+	sd->desc.nctrls = ARRAY_SIZE(st6422_ctrl);
+	sd->sensor_priv = sensor_settings;
+
+	for (i = 0; i < sd->desc.nctrls; i++)
+		sensor_settings[i] = st6422_ctrl[i].qctrl.default_value;
+
+	return 0;
+}
+
+static int st6422_init(struct sd *sd)
+{
+	int err = 0, i;
+
+	const u16 st6422_bridge_init[][2] = {
+		{ STV_ISO_ENABLE, 0x00 }, /* disable capture */
+		{ 0x1436, 0x00 },
+		{ 0x1432, 0x03 },	/* 0x00-0x1F brightness */
+		{ 0x143a, 0xF9 },	/* 0x00-0x0F contrast */
+		{ 0x0509, 0x38 },	/* R */
+		{ 0x050a, 0x38 },	/* G */
+		{ 0x050b, 0x38 },	/* B */
+		{ 0x050c, 0x2A },
+		{ 0x050d, 0x01 },
+
+
+		{ 0x1431, 0x00 },	/* 0x00-0x07 ??? */
+		{ 0x1433, 0x34 },	/* 160x120, 0x00-0x01 night filter */
+		{ 0x1438, 0x18 },	/* 640x480 */
+/* 18 bayes */
+/* 10 compressed? */
+
+		{ 0x1439, 0x00 },
+/* antiflimmer??  0xa2 ger perfekt bild mot monitor */
+
+		{ 0x143b, 0x05 },
+		{ 0x143c, 0x00 },	/* 0x00-0x01 - ??? */
+
+
+/* shutter time 0x0000-0x03FF */
+/* low value  give good picures on moving objects (but requires much light) */
+/* high value gives good picures in darkness (but tends to be overexposed) */
+		{ 0x143e, 0x01 },
+		{ 0x143d, 0x00 },
+
+		{ 0x1442, 0xe2 },
+/* write: 1x1x xxxx */
+/* read:  1x1x xxxx */
+/*        bit 5 == button pressed and hold if 0 */
+/* write 0xe2,0xea */
+
+/* 0x144a */
+/* 0x00 init */
+/* bit 7 == button has been pressed, but not handled */
+
+/* interrupt */
+/* if(urb->iso_frame_desc[i].status == 0x80) { */
+/* if(urb->iso_frame_desc[i].status == 0x88) { */
+
+		{ 0x1500, 0xd0 },
+		{ 0x1500, 0xd0 },
+		{ 0x1500, 0x50 },	/* 0x00 - 0xFF  0x80 == compr ? */
+
+		{ 0x1501, 0xaf },
+/* high val-> ljus area blir morkare. */
+/* low val -> ljus area blir ljusare. */
+		{ 0x1502, 0xc2 },
+/* high val-> ljus area blir morkare. */
+/* low val -> ljus area blir ljusare. */
+		{ 0x1503, 0x45 },
+/* high val-> ljus area blir morkare. */
+/* low val -> ljus area blir ljusare. */
+
+		{ 0x1505, 0x02 },
+/* 2  : 324x248  80352 bytes */
+/* 7  : 248x162  40176 bytes */
+/* c+f: 162*124  20088 bytes */
+
+		{ 0x150e, 0x8e },
+		{ 0x150f, 0x37 },
+		{ 0x15c0, 0x00 },
+		{ 0x15c1, 1023 }, /* 160x120, ISOC_PACKET_SIZE */
+		{ 0x15c3, 0x08 },	/* 0x04/0x14 ... test pictures ??? */
+
+
+		{ 0x143f, 0x01 },	/* commit settings */
+
+	};
+
+	for (i = 0; i < ARRAY_SIZE(st6422_bridge_init) && !err; i++) {
+		err = stv06xx_write_bridge(sd, st6422_bridge_init[i][0],
+					       st6422_bridge_init[i][1]);
+	}
+
+	return err;
+}
+
+static void st6422_disconnect(struct sd *sd)
+{
+	sd->sensor = NULL;
+	kfree(sd->sensor_priv);
+}
+
+static int st6422_start(struct sd *sd)
+{
+	int err, packet_size;
+	struct cam *cam = &sd->gspca_dev.cam;
+	s32 *sensor_settings = sd->sensor_priv;
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
+
+	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+	if (!alt) {
+		PDEBUG(D_ERR, "Couldn't get altsetting");
+		return -EIO;
+	}
+
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+	err = stv06xx_write_bridge(sd, 0x15c1, packet_size);
+	if (err < 0)
+		return err;
+
+	if (cam->cam_mode[sd->gspca_dev.curr_mode].priv)
+		err = stv06xx_write_bridge(sd, 0x1505, 0x0f);
+	else
+		err = stv06xx_write_bridge(sd, 0x1505, 0x02);
+	if (err < 0)
+		return err;
+
+	err = st6422_set_brightness(&sd->gspca_dev,
+				    sensor_settings[BRIGHTNESS_IDX]);
+	if (err < 0)
+		return err;
+
+	err = st6422_set_contrast(&sd->gspca_dev,
+				  sensor_settings[CONTRAST_IDX]);
+	if (err < 0)
+		return err;
+
+	err = st6422_set_exposure(&sd->gspca_dev,
+				  sensor_settings[EXPOSURE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = st6422_set_gain(&sd->gspca_dev,
+			      sensor_settings[GAIN_IDX]);
+	if (err < 0)
+		return err;
+
+	PDEBUG(D_STREAM, "Starting stream");
+
+	return 0;
+}
+
+static int st6422_stop(struct sd *sd)
+{
+	PDEBUG(D_STREAM, "Halting stream");
+
+	return 0;
+}
+
+static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[BRIGHTNESS_IDX];
+
+	PDEBUG(D_V4L2, "Read brightness %d", *val);
+
+	return 0;
+}
+
+static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[BRIGHTNESS_IDX] = val;
+
+	if (!gspca_dev->streaming)
+		return 0;
+
+	/* val goes from 0 -> 31 */
+	PDEBUG(D_V4L2, "Set brightness to %d", val);
+	err = stv06xx_write_bridge(sd, 0x1432, val);
+	if (err < 0)
+		return err;
+
+	/* commit settings */
+	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+	return (err < 0) ? err : 0;
+}
+
+static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[CONTRAST_IDX];
+
+	PDEBUG(D_V4L2, "Read contrast %d", *val);
+
+	return 0;
+}
+
+static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[CONTRAST_IDX] = val;
+
+	if (!gspca_dev->streaming)
+		return 0;
+
+	/* Val goes from 0 -> 15 */
+	PDEBUG(D_V4L2, "Set contrast to %d\n", val);
+	err = stv06xx_write_bridge(sd, 0x143a, 0xf0 | val);
+	if (err < 0)
+		return err;
+
+	/* commit settings */
+	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+	return (err < 0) ? err : 0;
+}
+
+static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[GAIN_IDX];
+
+	PDEBUG(D_V4L2, "Read gain %d", *val);
+
+	return 0;
+}
+
+static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[GAIN_IDX] = val;
+
+	if (!gspca_dev->streaming)
+		return 0;
+
+	PDEBUG(D_V4L2, "Set gain to %d", val);
+
+	/* Set red, green, blue, gain */
+	err = stv06xx_write_bridge(sd, 0x0509, val);
+	if (err < 0)
+		return err;
+
+	err = stv06xx_write_bridge(sd, 0x050a, val);
+	if (err < 0)
+		return err;
+
+	err = stv06xx_write_bridge(sd, 0x050b, val);
+	if (err < 0)
+		return err;
+
+	/* 2 mystery writes */
+	err = stv06xx_write_bridge(sd, 0x050c, 0x2a);
+	if (err < 0)
+		return err;
+
+	err = stv06xx_write_bridge(sd, 0x050d, 0x01);
+	if (err < 0)
+		return err;
+
+	/* commit settings */
+	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+	return (err < 0) ? err : 0;
+}
+
+static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[EXPOSURE_IDX];
+
+	PDEBUG(D_V4L2, "Read exposure %d", *val);
+
+	return 0;
+}
+
+static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[EXPOSURE_IDX] = val;
+
+	if (!gspca_dev->streaming)
+		return 0;
+
+	PDEBUG(D_V4L2, "Set exposure to %d\n", val);
+	err = stv06xx_write_bridge(sd, 0x143d, val & 0xff);
+	if (err < 0)
+		return err;
+
+	err = stv06xx_write_bridge(sd, 0x143e, val >> 8);
+	if (err < 0)
+		return err;
+
+	/* commit settings */
+	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+	return (err < 0) ? err : 0;
+}
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
new file mode 100644
index 000000000000..b2d45fe50522
--- /dev/null
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
@@ -0,0 +1,59 @@
+/*
+ * Support for the sensor part which is integrated (I think) into the
+ * st6422 stv06xx alike bridge, as its integrated there are no i2c writes
+ * but instead direct bridge writes.
+ *
+ * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Strongly based on qc-usb-messenger, which is:
+ * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher
+ *		      Mark Cave-Ayland, Carlo E Prelz, Dick Streefland
+ * Copyright (c) 2002, 2003 Tuukka Toivonen
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef STV06XX_ST6422_H_
+#define STV06XX_ST6422_H_
+
+#include "stv06xx_sensor.h"
+
+static int st6422_probe(struct sd *sd);
+static int st6422_start(struct sd *sd);
+static int st6422_init(struct sd *sd);
+static int st6422_stop(struct sd *sd);
+static void st6422_disconnect(struct sd *sd);
+
+/* V4L2 controls supported by the driver */
+static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val);
+static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val);
+static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
+
+const struct stv06xx_sensor stv06xx_sensor_st6422 = {
+	.name = "ST6422",
+	.init = st6422_init,
+	.probe = st6422_probe,
+	.start = st6422_start,
+	.stop = st6422_stop,
+	.disconnect = st6422_disconnect,
+};
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c
index 84995bcf4a75..a3b77ed3f089 100644
--- a/drivers/media/video/ivtv/ivtv-controls.c
+++ b/drivers/media/video/ivtv/ivtv-controls.c
@@ -60,6 +60,8 @@ int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl)
 
 	switch (qctrl->id) {
 	/* Standard V4L2 controls */
+	case V4L2_CID_USER_CLASS:
+		return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
 	case V4L2_CID_BRIGHTNESS:
 	case V4L2_CID_HUE:
 	case V4L2_CID_SATURATION:
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 459c04cbf69d..4d794b42d6cd 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -280,15 +280,9 @@ static int mt9m001_try_fmt(struct soc_camera_device *icd,
 {
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
-	if (pix->height < 32 + icd->y_skip_top)
-		pix->height = 32 + icd->y_skip_top;
-	if (pix->height > 1024 + icd->y_skip_top)
-		pix->height = 1024 + icd->y_skip_top;
-	if (pix->width < 48)
-		pix->width = 48;
-	if (pix->width > 1280)
-		pix->width = 1280;
-	pix->width &= ~0x01; /* has to be even, unsure why was ~3 */
+	v4l_bound_align_image(&pix->width, 48, 1280, 1,
+			      &pix->height, 32 + icd->y_skip_top,
+			      1024 + icd->y_skip_top, 0, 0);
 
 	return 0;
 }
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index f72aeb7c4deb..4207fb342670 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -385,17 +385,9 @@ static int mt9t031_try_fmt(struct soc_camera_device *icd,
 {
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
-	if (pix->height < MT9T031_MIN_HEIGHT)
-		pix->height = MT9T031_MIN_HEIGHT;
-	if (pix->height > MT9T031_MAX_HEIGHT)
-		pix->height = MT9T031_MAX_HEIGHT;
-	if (pix->width < MT9T031_MIN_WIDTH)
-		pix->width = MT9T031_MIN_WIDTH;
-	if (pix->width > MT9T031_MAX_WIDTH)
-		pix->width = MT9T031_MAX_WIDTH;
-
-	pix->width &= ~0x01; /* has to be even */
-	pix->height &= ~0x01; /* has to be even */
+	v4l_bound_align_image(
+		&pix->width, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH, 1,
+		&pix->height, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT, 1, 0);
 
 	return 0;
 }
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index be20d312b1dc..dbdcc86ae50d 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -364,15 +364,9 @@ static int mt9v022_try_fmt(struct soc_camera_device *icd,
 {
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
-	if (pix->height < 32 + icd->y_skip_top)
-		pix->height = 32 + icd->y_skip_top;
-	if (pix->height > 480 + icd->y_skip_top)
-		pix->height = 480 + icd->y_skip_top;
-	if (pix->width < 48)
-		pix->width = 48;
-	if (pix->width > 752)
-		pix->width = 752;
-	pix->width &= ~0x03; /* ? */
+	v4l_bound_align_image(&pix->width, 48, 752, 2 /* ? */,
+			      &pix->height, 32 + icd->y_skip_top,
+			      480 + icd->y_skip_top, 0, 0);
 
 	return 0;
 }
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 08cfd3e4ae8a..0bc2cf573c76 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -211,8 +211,6 @@ static const int i2c_detect_tries = 5;
 static struct usb_device_id device_table [] = {
 	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511) },
 	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) },
-	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV518) },
-	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV518PLUS) },
 	{ USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) },
 	{ }  /* Terminating entry */
 };
diff --git a/drivers/media/video/pvrusb2/pvrusb2-audio.c b/drivers/media/video/pvrusb2/pvrusb2-audio.c
index 10ef1a2c13ea..416933ca607d 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-audio.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-audio.c
@@ -48,11 +48,13 @@ static const int routing_scheme0[] = {
 						MSP_DSP_IN_SCART),
 };
 
-static const struct routing_scheme routing_schemes[] = {
-	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = {
-		.def = routing_scheme0,
-		.cnt = ARRAY_SIZE(routing_scheme0),
-	},
+static const struct routing_scheme routing_def0 = {
+	.def = routing_scheme0,
+	.cnt = ARRAY_SIZE(routing_scheme0),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0,
 };
 
 void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
@@ -65,7 +67,7 @@ void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 		pvr2_trace(PVR2_TRACE_CHIPS, "subdev msp3400 v4l2 set_stereo");
 
 		if ((sid < ARRAY_SIZE(routing_schemes)) &&
-		    ((sp = routing_schemes + sid) != NULL) &&
+		    ((sp = routing_schemes[sid]) != NULL) &&
 		    (hdw->input_val >= 0) &&
 		    (hdw->input_val < sp->cnt)) {
 			input = sp->def[hdw->input_val];
diff --git a/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c b/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c
index 9023adf3fdcc..68980e19409f 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c
@@ -49,11 +49,13 @@ static const int routing_scheme1[] = {
 	[PVR2_CVAL_INPUT_SVIDEO] =  0,
 };
 
-static const struct routing_scheme routing_schemes[] = {
-	[PVR2_ROUTING_SCHEME_ONAIR] = {
-		.def = routing_scheme1,
-		.cnt = ARRAY_SIZE(routing_scheme1),
-	},
+static const struct routing_scheme routing_def1 = {
+	.def = routing_scheme1,
+	.cnt = ARRAY_SIZE(routing_scheme1),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+	[PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1,
 };
 
 
@@ -65,12 +67,11 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 		u32 input;
 		pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)",
 			   hdw->input_val);
-		if ((sid < ARRAY_SIZE(routing_schemes)) &&
-		    ((sp = routing_schemes + sid) != NULL) &&
-		    (hdw->input_val >= 0) &&
-		    (hdw->input_val < sp->cnt)) {
-			input = sp->def[hdw->input_val];
-		} else {
+		sp = (sid < ARRAY_SIZE(routing_schemes)) ?
+			routing_schemes[sid] : NULL;
+		if ((sp == NULL) ||
+		    (hdw->input_val < 0) ||
+		    (hdw->input_val >= sp->cnt)) {
 			pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 				   "*** WARNING *** subdev v4l2 set_input:"
 				   " Invalid routing scheme (%u)"
@@ -78,6 +79,7 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 				   sid, hdw->input_val);
 			return;
 		}
+		input = sp->def[hdw->input_val];
 		sd->ops->audio->s_routing(sd, input, 0, 0);
 	}
 }
diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
index 05e52358ae49..82c135835753 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
@@ -68,6 +68,11 @@ static const struct routing_scheme_item routing_scheme0[] = {
 	},
 };
 
+static const struct routing_scheme routing_def0 = {
+	.def = routing_scheme0,
+	.cnt = ARRAY_SIZE(routing_scheme0),
+};
+
 /* Specific to gotview device */
 static const struct routing_scheme_item routing_schemegv[] = {
 	[PVR2_CVAL_INPUT_TV] = {
@@ -90,15 +95,14 @@ static const struct routing_scheme_item routing_schemegv[] = {
 	},
 };
 
-static const struct routing_scheme routing_schemes[] = {
-	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = {
-		.def = routing_scheme0,
-		.cnt = ARRAY_SIZE(routing_scheme0),
-	},
-	[PVR2_ROUTING_SCHEME_GOTVIEW] = {
-		.def = routing_schemegv,
-		.cnt = ARRAY_SIZE(routing_schemegv),
-	},
+static const struct routing_scheme routing_defgv = {
+	.def = routing_schemegv,
+	.cnt = ARRAY_SIZE(routing_schemegv),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0,
+	[PVR2_ROUTING_SCHEME_GOTVIEW] = &routing_defgv,
 };
 
 void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
@@ -110,13 +114,11 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 		const struct routing_scheme *sp;
 		unsigned int sid = hdw->hdw_desc->signal_routing_scheme;
 
-		if ((sid < ARRAY_SIZE(routing_schemes)) &&
-		    ((sp = routing_schemes + sid) != NULL) &&
-		    (hdw->input_val >= 0) &&
-		    (hdw->input_val < sp->cnt)) {
-			vid_input = sp->def[hdw->input_val].vid;
-			aud_input = sp->def[hdw->input_val].aud;
-		} else {
+		sp = (sid < ARRAY_SIZE(routing_schemes)) ?
+			routing_schemes[sid] : NULL;
+		if ((sp == NULL) ||
+		    (hdw->input_val < 0) ||
+		    (hdw->input_val >= sp->cnt)) {
 			pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 				   "*** WARNING *** subdev cx2584x set_input:"
 				   " Invalid routing scheme (%u)"
@@ -124,7 +126,8 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 				   sid, hdw->input_val);
 			return;
 		}
-
+		vid_input = sp->def[hdw->input_val].vid;
+		aud_input = sp->def[hdw->input_val].aud;
 		pvr2_trace(PVR2_TRACE_CHIPS,
 			   "subdev cx2584x set_input vid=0x%x aud=0x%x",
 			   vid_input, aud_input);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 0c745b142fb7..cbc388729d77 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -85,8 +85,8 @@ MODULE_PARM_DESC(video_std,"specify initial video standard");
 module_param_array(tolerance,    int, NULL, 0444);
 MODULE_PARM_DESC(tolerance,"specify stream error tolerance");
 
-/* US Broadcast channel 7 (175.25 MHz) */
-static int default_tv_freq    = 175250000L;
+/* US Broadcast channel 3 (61.25 MHz), to help with testing */
+static int default_tv_freq    = 61250000L;
 /* 104.3 MHz, a usable FM station for my area */
 static int default_radio_freq = 104300000L;
 
@@ -1987,6 +1987,34 @@ static unsigned int pvr2_copy_i2c_addr_list(
 }
 
 
+static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw)
+{
+	/*
+	  Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit of nuttiness
+	  for cx25840 causes that module to correctly set up its video
+	  scaling.  This is really a problem in the cx25840 module itself,
+	  but we work around it here.  The problem has not been seen in
+	  ivtv because there VBI is supported and set up.  We don't do VBI
+	  here (at least not yet) and thus we never attempted to even set
+	  it up.
+	*/
+	struct v4l2_format fmt;
+	if (hdw->decoder_client_id != PVR2_CLIENT_ID_CX25840) {
+		/* We're not using a cx25840 so don't enable the hack */
+		return;
+	}
+
+	pvr2_trace(PVR2_TRACE_INIT,
+		   "Module ID %u:"
+		   " Executing cx25840 VBI hack",
+		   hdw->decoder_client_id);
+	memset(&fmt, 0, sizeof(fmt));
+	fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
+	v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
+			     video, s_fmt, &fmt);
+}
+
+
 static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
 				const struct pvr2_device_client_desc *cd)
 {
@@ -2078,30 +2106,6 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
 	/* client-specific setup... */
 	switch (mid) {
 	case PVR2_CLIENT_ID_CX25840:
-		hdw->decoder_client_id = mid;
-		{
-			/*
-			  Mike Isely <isely@pobox.com> 19-Nov-2006 - This
-			  bit of nuttiness for cx25840 causes that module
-			  to correctly set up its video scaling.  This is
-			  really a problem in the cx25840 module itself,
-			  but we work around it here.  The problem has not
-			  been seen in ivtv because there VBI is supported
-			  and set up.  We don't do VBI here (at least not
-			  yet) and thus we never attempted to even set it
-			  up.
-			*/
-			struct v4l2_format fmt;
-			pvr2_trace(PVR2_TRACE_INIT,
-				   "Module ID %u:"
-				   " Executing cx25840 VBI hack",
-				   mid);
-			memset(&fmt, 0, sizeof(fmt));
-			fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
-			v4l2_device_call_all(&hdw->v4l2_dev, mid,
-					     video, s_fmt, &fmt);
-		}
-		break;
 	case PVR2_CLIENT_ID_SAA7115:
 		hdw->decoder_client_id = mid;
 		break;
@@ -2202,6 +2206,8 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
 		cptr->info->set_value(cptr,~0,cptr->info->default_value);
 	}
 
+	pvr2_hdw_cx25840_vbi_hack(hdw);
+
 	/* Set up special default values for the television and radio
 	   frequencies here.  It's not really important what these defaults
 	   are, but I set them to something usable in the Chicago area just
@@ -2954,6 +2960,7 @@ static void pvr2_subdev_update(struct pvr2_hdw *hdw)
 			vs = hdw->std_mask_cur;
 			v4l2_device_call_all(&hdw->v4l2_dev, 0,
 					     core, s_std, vs);
+			pvr2_hdw_cx25840_vbi_hack(hdw);
 		}
 		hdw->tuner_signal_stale = !0;
 		hdw->cropcap_stale = !0;
@@ -4076,6 +4083,7 @@ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw)
 	if (hdw->decoder_client_id) {
 		v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
 				     core, reset, 0);
+		pvr2_hdw_cx25840_vbi_hack(hdw);
 		return 0;
 	}
 	pvr2_trace(PVR2_TRACE_INIT,
diff --git a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c
index d2fe7c8f2c3a..4c96cf48c796 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c
@@ -54,6 +54,11 @@ static const int routing_scheme0[] = {
 	[PVR2_CVAL_INPUT_SVIDEO] =  SAA7115_SVIDEO2,
 };
 
+static const struct routing_scheme routing_def0 = {
+	.def = routing_scheme0,
+	.cnt = ARRAY_SIZE(routing_scheme0),
+};
+
 static const int routing_scheme1[] = {
 	[PVR2_CVAL_INPUT_TV] = SAA7115_COMPOSITE4,
 	[PVR2_CVAL_INPUT_RADIO] = SAA7115_COMPOSITE5,
@@ -61,15 +66,14 @@ static const int routing_scheme1[] = {
 	[PVR2_CVAL_INPUT_SVIDEO] =  SAA7115_SVIDEO2, /* or SVIDEO0, it seems */
 };
 
-static const struct routing_scheme routing_schemes[] = {
-	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = {
-		.def = routing_scheme0,
-		.cnt = ARRAY_SIZE(routing_scheme0),
-	},
-	[PVR2_ROUTING_SCHEME_ONAIR] = {
-		.def = routing_scheme1,
-		.cnt = ARRAY_SIZE(routing_scheme1),
-	},
+static const struct routing_scheme routing_def1 = {
+	.def = routing_scheme1,
+	.cnt = ARRAY_SIZE(routing_scheme1),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+	[PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0,
+	[PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1,
 };
 
 void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
@@ -81,12 +85,12 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 
 		pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)",
 			   hdw->input_val);
-		if ((sid < ARRAY_SIZE(routing_schemes)) &&
-		    ((sp = routing_schemes + sid) != NULL) &&
-		    (hdw->input_val >= 0) &&
-		    (hdw->input_val < sp->cnt)) {
-			input = sp->def[hdw->input_val];
-		} else {
+
+		sp = (sid < ARRAY_SIZE(routing_schemes)) ?
+			routing_schemes[sid] : NULL;
+		if ((sp == NULL) ||
+		    (hdw->input_val < 0) ||
+		    (hdw->input_val >= sp->cnt)) {
 			pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 				   "*** WARNING *** subdev v4l2 set_input:"
 				   " Invalid routing scheme (%u)"
@@ -94,6 +98,7 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
 				   sid, hdw->input_val);
 			return;
 		}
+		input = sp->def[hdw->input_val];
 		sd->ops->video->s_routing(sd, input, 0, 0);
 	}
 }
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index f60de40fd21f..46e0d8ad880f 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -163,13 +163,6 @@
 			CICR0_EOFM | CICR0_FOM)
 
 /*
- * YUV422P picture size should be a multiple of 16, so the heuristic aligns
- * height, width on 4 byte boundaries to reach the 16 multiple for the size.
- */
-#define YUV422P_X_Y_ALIGN 4
-#define YUV422P_SIZE_ALIGN YUV422P_X_Y_ALIGN * YUV422P_X_Y_ALIGN
-
-/*
  * Structures
  */
 enum pxa_camera_active_dma {
@@ -1398,28 +1391,15 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 		return -EINVAL;
 	}
 
-	/* limit to pxa hardware capabilities */
-	if (pix->height < 32)
-		pix->height = 32;
-	if (pix->height > 2048)
-		pix->height = 2048;
-	if (pix->width < 48)
-		pix->width = 48;
-	if (pix->width > 2048)
-		pix->width = 2048;
-	pix->width &= ~0x01;
-
 	/*
-	 * YUV422P planar format requires images size to be a 16 bytes
-	 * multiple. If not, zeros will be inserted between Y and U planes, and
-	 * U and V planes, and YUV422P standard would be violated.
+	 * Limit to pxa hardware capabilities.  YUV422P planar format requires
+	 * images size to be a multiple of 16 bytes.  If not, zeros will be
+	 * inserted between Y and U planes, and U and V planes, which violates
+	 * the YUV422P standard.
 	 */
-	if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P) {
-		if (!IS_ALIGNED(pix->width * pix->height, YUV422P_SIZE_ALIGN))
-			pix->height = ALIGN(pix->height, YUV422P_X_Y_ALIGN);
-		if (!IS_ALIGNED(pix->width * pix->height, YUV422P_SIZE_ALIGN))
-			pix->width = ALIGN(pix->width, YUV422P_X_Y_ALIGN);
-	}
+	v4l_bound_align_image(&pix->width, 48, 2048, 1,
+			      &pix->height, 32, 2048, 0,
+			      xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0);
 
 	pix->bytesperline = pix->width *
 		DIV_ROUND_UP(xlate->host_fmt->depth, 8);
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index e305c1674cee..ba87128542e0 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1640,15 +1640,8 @@ static int saa7134_try_fmt_vid_cap(struct file *file, void *priv,
 	}
 
 	f->fmt.pix.field = field;
-	if (f->fmt.pix.width  < 48)
-		f->fmt.pix.width  = 48;
-	if (f->fmt.pix.height < 32)
-		f->fmt.pix.height = 32;
-	if (f->fmt.pix.width > maxw)
-		f->fmt.pix.width = maxw;
-	if (f->fmt.pix.height > maxh)
-		f->fmt.pix.height = maxh;
-	f->fmt.pix.width &= ~0x03;
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
 	f->fmt.pix.bytesperline =
 		(f->fmt.pix.width * fmt->depth) >> 3;
 	f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index d369e8409ab8..0db88a53d92c 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -689,16 +689,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 
 	/* FIXME: calculate using depth and bus width */
 
-	if (f->fmt.pix.height < 4)
-		f->fmt.pix.height = 4;
-	if (f->fmt.pix.height > 1920)
-		f->fmt.pix.height = 1920;
-	if (f->fmt.pix.width < 2)
-		f->fmt.pix.width = 2;
-	if (f->fmt.pix.width > 2560)
-		f->fmt.pix.width = 2560;
-	f->fmt.pix.width &= ~0x01;
-	f->fmt.pix.height &= ~0x03;
+	v4l_bound_align_image(&f->fmt.pix.width, 2, 2560, 1,
+			      &f->fmt.pix.height, 4, 1920, 2, 0);
 
 	f->fmt.pix.bytesperline = f->fmt.pix.width *
 		DIV_ROUND_UP(xlate->host_fmt->depth, 8);
diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c
index b30c49248217..b90e9da3167d 100644
--- a/drivers/media/video/tcm825x.c
+++ b/drivers/media/video/tcm825x.c
@@ -878,7 +878,7 @@ static int tcm825x_probe(struct i2c_client *client,
 	return rval;
 }
 
-static int __exit tcm825x_remove(struct i2c_client *client)
+static int tcm825x_remove(struct i2c_client *client)
 {
 	struct tcm825x_sensor *sensor = i2c_get_clientdata(client);
 
@@ -902,7 +902,7 @@ static struct i2c_driver tcm825x_i2c_driver = {
 		.name = TCM825X_NAME,
 	},
 	.probe	= tcm825x_probe,
-	.remove	= __exit_p(tcm825x_remove),
+	.remove	= tcm825x_remove,
 	.id_table = tcm825x_id,
 };
 
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index e4cb99c1f94b..adb1c044ad7d 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -38,10 +38,13 @@ config USB_KONICAWC
 	  module will be called konicawc.
 
 config USB_QUICKCAM_MESSENGER
-	tristate "USB Logitech Quickcam Messenger"
+	tristate "USB Logitech Quickcam Messenger (DEPRECATED)"
 	depends on VIDEO_V4L1
 	select VIDEO_USBVIDEO
 	---help---
+	  This driver is DEPRECATED please use the gspca stv06xx module
+	  instead.
+
 	  Say Y or M here to enable support for the USB Logitech Quickcam
 	  Messenger webcam.
 
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index f96475626da7..b91d66a767d7 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -802,6 +802,17 @@ struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
 	/* Decrease the module use count to match the first try_module_get. */
 	module_put(client->driver->driver.owner);
 
+	if (sd) {
+		/* We return errors from v4l2_subdev_call only if we have the
+		   callback as the .s_config is not mandatory */
+		int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
+
+		if (err && err != -ENOIOCTLCMD) {
+			v4l2_device_unregister_subdev(sd);
+			sd = NULL;
+		}
+	}
+
 error:
 	/* If we have a client but no subdev, then something went wrong and
 	   we must unregister the client. */
@@ -852,6 +863,17 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev,
 	/* Decrease the module use count to match the first try_module_get. */
 	module_put(client->driver->driver.owner);
 
+	if (sd) {
+		/* We return errors from v4l2_subdev_call only if we have the
+		   callback as the .s_config is not mandatory */
+		int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
+
+		if (err && err != -ENOIOCTLCMD) {
+			v4l2_device_unregister_subdev(sd);
+			sd = NULL;
+		}
+	}
+
 error:
 	/* If we have a client but no subdev, then something went wrong and
 	   we must unregister the client. */
@@ -872,6 +894,89 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev
 }
 EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev_addr);
 
+/* Load an i2c sub-device. */
+struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter, const char *module_name,
+		struct i2c_board_info *info, const unsigned short *probe_addrs)
+{
+	struct v4l2_subdev *sd = NULL;
+	struct i2c_client *client;
+
+	BUG_ON(!v4l2_dev);
+
+	if (module_name)
+		request_module(module_name);
+
+	/* Create the i2c client */
+	if (info->addr == 0 && probe_addrs)
+		client = i2c_new_probed_device(adapter, info, probe_addrs);
+	else
+		client = i2c_new_device(adapter, info);
+
+	/* Note: by loading the module first we are certain that c->driver
+	   will be set if the driver was found. If the module was not loaded
+	   first, then the i2c core tries to delay-load the module for us,
+	   and then c->driver is still NULL until the module is finally
+	   loaded. This delay-load mechanism doesn't work if other drivers
+	   want to use the i2c device, so explicitly loading the module
+	   is the best alternative. */
+	if (client == NULL || client->driver == NULL)
+		goto error;
+
+	/* Lock the module so we can safely get the v4l2_subdev pointer */
+	if (!try_module_get(client->driver->driver.owner))
+		goto error;
+	sd = i2c_get_clientdata(client);
+
+	/* Register with the v4l2_device which increases the module's
+	   use count as well. */
+	if (v4l2_device_register_subdev(v4l2_dev, sd))
+		sd = NULL;
+	/* Decrease the module use count to match the first try_module_get. */
+	module_put(client->driver->driver.owner);
+
+	if (sd) {
+		/* We return errors from v4l2_subdev_call only if we have the
+		   callback as the .s_config is not mandatory */
+		int err = v4l2_subdev_call(sd, core, s_config,
+				info->irq, info->platform_data);
+
+		if (err && err != -ENOIOCTLCMD) {
+			v4l2_device_unregister_subdev(sd);
+			sd = NULL;
+		}
+	}
+
+error:
+	/* If we have a client but no subdev, then something went wrong and
+	   we must unregister the client. */
+	if (client && sd == NULL)
+		i2c_unregister_device(client);
+	return sd;
+}
+EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board);
+
+struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter,
+		const char *module_name, const char *client_type,
+		int irq, void *platform_data,
+		u8 addr, const unsigned short *probe_addrs)
+{
+	struct i2c_board_info info;
+
+	/* Setup the i2c board info with the device type and
+	   the device address. */
+	memset(&info, 0, sizeof(info));
+	strlcpy(info.type, client_type, sizeof(info.type));
+	info.addr = addr;
+	info.irq = irq;
+	info.platform_data = platform_data;
+
+	return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name,
+			&info, probe_addrs);
+}
+EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg);
+
 /* Return i2c client address of v4l2_subdev. */
 unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd)
 {
@@ -916,4 +1021,78 @@ const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type)
 }
 EXPORT_SYMBOL_GPL(v4l2_i2c_tuner_addrs);
 
-#endif
+#endif /* defined(CONFIG_I2C) */
+
+/* Clamp x to be between min and max, aligned to a multiple of 2^align.  min
+ * and max don't have to be aligned, but there must be at least one valid
+ * value.  E.g., min=17,max=31,align=4 is not allowed as there are no multiples
+ * of 16 between 17 and 31.  */
+static unsigned int clamp_align(unsigned int x, unsigned int min,
+				unsigned int max, unsigned int align)
+{
+	/* Bits that must be zero to be aligned */
+	unsigned int mask = ~((1 << align) - 1);
+
+	/* Round to nearest aligned value */
+	if (align)
+		x = (x + (1 << (align - 1))) & mask;
+
+	/* Clamp to aligned value of min and max */
+	if (x < min)
+		x = (min + ~mask) & mask;
+	else if (x > max)
+		x = max & mask;
+
+	return x;
+}
+
+/* Bound an image to have a width between wmin and wmax, and height between
+ * hmin and hmax, inclusive.  Additionally, the width will be a multiple of
+ * 2^walign, the height will be a multiple of 2^halign, and the overall size
+ * (width*height) will be a multiple of 2^salign.  The image may be shrunk
+ * or enlarged to fit the alignment constraints.
+ *
+ * The width or height maximum must not be smaller than the corresponding
+ * minimum.  The alignments must not be so high there are no possible image
+ * sizes within the allowed bounds.  wmin and hmin must be at least 1
+ * (don't use 0).  If you don't care about a certain alignment, specify 0,
+ * as 2^0 is 1 and one byte alignment is equivalent to no alignment.  If
+ * you only want to adjust downward, specify a maximum that's the same as
+ * the initial value.
+ */
+void v4l_bound_align_image(u32 *w, unsigned int wmin, unsigned int wmax,
+			   unsigned int walign,
+			   u32 *h, unsigned int hmin, unsigned int hmax,
+			   unsigned int halign, unsigned int salign)
+{
+	*w = clamp_align(*w, wmin, wmax, walign);
+	*h = clamp_align(*h, hmin, hmax, halign);
+
+	/* Usually we don't need to align the size and are done now. */
+	if (!salign)
+		return;
+
+	/* How much alignment do we have? */
+	walign = __ffs(*w);
+	halign = __ffs(*h);
+	/* Enough to satisfy the image alignment? */
+	if (walign + halign < salign) {
+		/* Max walign where there is still a valid width */
+		unsigned int wmaxa = __fls(wmax ^ (wmin - 1));
+		/* Max halign where there is still a valid height */
+		unsigned int hmaxa = __fls(hmax ^ (hmin - 1));
+
+		/* up the smaller alignment until we have enough */
+		do {
+			if (halign >= hmaxa ||
+			    (walign <= halign && walign < wmaxa)) {
+				*w = clamp_align(*w, wmin, wmax, walign + 1);
+				walign = __ffs(*w);
+			} else {
+				*h = clamp_align(*h, hmin, hmax, halign + 1);
+				halign = __ffs(*h);
+			}
+		} while (halign + walign < salign);
+	}
+}
+EXPORT_SYMBOL_GPL(v4l_bound_align_image);
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index fbfefae7886f..cd7266858462 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -883,15 +883,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	maxh  = norm_maxh();
 
 	f->fmt.pix.field = field;
-	if (f->fmt.pix.height < 32)
-		f->fmt.pix.height = 32;
-	if (f->fmt.pix.height > maxh)
-		f->fmt.pix.height = maxh;
-	if (f->fmt.pix.width < 48)
-		f->fmt.pix.width = 48;
-	if (f->fmt.pix.width > maxw)
-		f->fmt.pix.width = maxw;
-	f->fmt.pix.width &= ~0x03;
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
 	f->fmt.pix.bytesperline =
 		(f->fmt.pix.width * fmt->depth) >> 3;
 	f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index f59b2bd07e89..6c3f23e31b5c 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -460,7 +460,7 @@ static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture);
 static int w9968cf_set_window(struct w9968cf_device*, struct video_window);
 static int w9968cf_postprocess_frame(struct w9968cf_device*,
 				     struct w9968cf_frame_t*);
-static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h);
+static int w9968cf_adjust_window_size(struct w9968cf_device*, u32 *w, u32 *h);
 static void w9968cf_init_framelist(struct w9968cf_device*);
 static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num);
 static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
@@ -1763,8 +1763,7 @@ w9968cf_set_window(struct w9968cf_device* cam, struct video_window win)
 	#define UNSC(x) ((x) >> 10)
 
 	/* Make sure we are using a supported resolution */
-	if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
-					      (u16*)&win.height)))
+	if ((err = w9968cf_adjust_window_size(cam, &win.width, &win.height)))
 		goto error;
 
 	/* Scaling factors */
@@ -1914,12 +1913,9 @@ error:
   Return 0 on success, -1 otherwise.
   --------------------------------------------------------------------------*/
 static int
-w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height)
+w9968cf_adjust_window_size(struct w9968cf_device *cam, u32 *width, u32 *height)
 {
-	u16 maxw, maxh;
-
-	if ((*width < cam->minwidth) || (*height < cam->minheight))
-		return -ERANGE;
+	unsigned int maxw, maxh, align;
 
 	maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
 	       w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
@@ -1927,16 +1923,10 @@ w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height)
 	maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
 	       w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
 			   : cam->maxheight;
+	align = (cam->vpp_flag & VPP_DECOMPRESSION) ? 4 : 0;
 
-	if (*width > maxw)
-		*width = maxw;
-	if (*height > maxh)
-		*height = maxh;
-
-	if (cam->vpp_flag & VPP_DECOMPRESSION) {
-		*width  &= ~15L; /* multiple of 16 */
-		*height &= ~15L;
-	}
+	v4l_bound_align_image(width, cam->minwidth, maxw, align,
+			      height, cam->minheight, maxh, align, 0);
 
 	PDBGG("Window size adjusted w=%u, h=%u ", *width, *height)
 
@@ -3043,8 +3033,8 @@ static long w9968cf_v4l_ioctl(struct file *filp,
 		if (win.clipcount != 0 || win.flags != 0)
 			return -EINVAL;
 
-		if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
-						      (u16*)&win.height))) {
+		if ((err = w9968cf_adjust_window_size(cam, &win.width,
+						      &win.height))) {
 			DBG(4, "Resolution not supported (%ux%u). "
 			       "VIDIOCSWIN failed", win.width, win.height)
 			return err;
@@ -3116,6 +3106,7 @@ static long w9968cf_v4l_ioctl(struct file *filp,
 	{
 		struct video_mmap mmap;
 		struct w9968cf_frame_t* fr;
+		u32 w, h;
 		int err = 0;
 
 		if (copy_from_user(&mmap, arg, sizeof(mmap)))
@@ -3164,8 +3155,10 @@ static long w9968cf_v4l_ioctl(struct file *filp,
 		   }
 		}
 
-		if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width,
-						      (u16*)&mmap.height))) {
+		w = mmap.width; h = mmap.height;
+		err = w9968cf_adjust_window_size(cam, &w, &h);
+		mmap.width = w; mmap.height = h;
+		if (err) {
 			DBG(4, "Resolution not supported (%dx%d). "
 			       "VIDIOCMCAPTURE failed",
 			    mmap.width, mmap.height)
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 643cccaa1aab..3d7df32a3d87 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -2088,16 +2088,10 @@ static int zoran_try_fmt_vid_cap(struct file *file, void *__fh,
 		return -EINVAL;
 	}
 
-	bpp = (zoran_formats[i].depth + 7) / 8;
-	fmt->fmt.pix.width &= ~((bpp == 2) ? 1 : 3);
-	if (fmt->fmt.pix.width > BUZ_MAX_WIDTH)
-		fmt->fmt.pix.width = BUZ_MAX_WIDTH;
-	if (fmt->fmt.pix.width < BUZ_MIN_WIDTH)
-		fmt->fmt.pix.width = BUZ_MIN_WIDTH;
-	if (fmt->fmt.pix.height > BUZ_MAX_HEIGHT)
-		fmt->fmt.pix.height = BUZ_MAX_HEIGHT;
-	if (fmt->fmt.pix.height < BUZ_MIN_HEIGHT)
-		fmt->fmt.pix.height = BUZ_MIN_HEIGHT;
+	bpp = DIV_ROUND_UP(zoran_formats[i].depth, 8);
+	v4l_bound_align_image(
+		&fmt->fmt.pix.width, BUZ_MIN_WIDTH, BUZ_MAX_WIDTH, bpp == 2 ? 1 : 2,
+		&fmt->fmt.pix.height, BUZ_MIN_HEIGHT, BUZ_MAX_HEIGHT, 0, 0);
 	mutex_unlock(&zr->resource_lock);
 
 	return 0;
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index f24eceecc5a6..8a025d510904 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -348,6 +348,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
 #define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
 #define V4L2_PIX_FMT_YVYU     v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
+#define V4L2_PIX_FMT_OV511    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
 #define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
 
 /*
@@ -894,9 +895,10 @@ enum v4l2_colorfx {
 	V4L2_COLORFX_BW		= 1,
 	V4L2_COLORFX_SEPIA	= 2,
 };
+#define V4L2_CID_AUTOBRIGHTNESS			(V4L2_CID_BASE+32)
 
 /* last CID + 1 */
-#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+32)
+#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+33)
 
 /*  MPEG-class control IDs defined by V4L2 */
 #define V4L2_CID_MPEG_BASE 			(V4L2_CTRL_CLASS_MPEG | 0x900)
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index 7b5b91f60425..9dcb632f6083 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -162,6 +162,8 @@ extern IR_KEYTAB_TYPE ir_codes_ati_tv_wonder_hd_600[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_kworld_plus_tv_analog[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_kaiomy[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE];
+
 #endif
 
 /*
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index c48c24e4d0fa..33a18426ab9b 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -153,6 +153,22 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev,
 struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev,
 		struct i2c_adapter *adapter,
 		const char *module_name, const char *client_type, u8 addr);
+
+/* Load an i2c module and return an initialized v4l2_subdev struct.
+   Only call request_module if module_name != NULL.
+   The client_type argument is the name of the chip that's on the adapter. */
+struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter,
+		const char *module_name, const char *client_type,
+		int irq, void *platform_data,
+		u8 addr, const unsigned short *probe_addrs);
+
+struct i2c_board_info;
+
+struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter, const char *module_name,
+		struct i2c_board_info *info, const unsigned short *probe_addrs);
+
 /* Initialize an v4l2_subdev with data from an i2c_client struct */
 void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
 		const struct v4l2_subdev_ops *ops);
@@ -193,4 +209,14 @@ struct v4l2_routing {
 	u32 output;
 };
 
+/* ------------------------------------------------------------------------- */
+
+/* Miscellaneous helper functions */
+
+void v4l_bound_align_image(unsigned int *w, unsigned int wmin,
+			   unsigned int wmax, unsigned int walign,
+			   unsigned int *h, unsigned int hmin,
+			   unsigned int hmax, unsigned int halign,
+			   unsigned int salign);
+
 #endif /* V4L2_COMMON_H_ */
diff --git a/include/media/v4l2-i2c-drv.h b/include/media/v4l2-i2c-drv.h
index 10a2882c3cbf..74bf741d1a9b 100644
--- a/include/media/v4l2-i2c-drv.h
+++ b/include/media/v4l2-i2c-drv.h
@@ -22,7 +22,7 @@
  */
 
 /* NOTE: the full version of this header is in the v4l-dvb repository
- * and allows v4l i2c drivers to be compiled on older kernels as well.
+ * and allows v4l i2c drivers to be compiled on pre-2.6.26 kernels.
  * The version of this header as it appears in the kernel is a stripped
  * version (without all the backwards compatibility stuff) and so it
  * looks a bit odd.
@@ -30,6 +30,9 @@
  * If you look at the full version then you will understand the reason
  * for introducing this header since you really don't want to have all
  * the tricky backwards compatibility code in each and every i2c driver.
+ *
+ * If the i2c driver will never be compiled for pre-2.6.26 kernels, then
+ * DO NOT USE this header! Just write it as a regular i2c driver.
  */
 
 #ifndef __V4L2_I2C_DRV_H__
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index a503e1cee78b..5dcb36785529 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -79,7 +79,11 @@ struct v4l2_decode_vbi_line {
    not yet implemented) since ops provide proper type-checking.
  */
 
-/* init: initialize the sensor registors to some sort of reasonable default
+/* s_config: if set, then it is always called by the v4l2_i2c_new_subdev*
+	functions after the v4l2_subdev was registered. It is used to pass
+	platform data to the subdev which can be used during initialization.
+
+   init: initialize the sensor registors to some sort of reasonable default
 	values. Do not use for new drivers and should be removed in existing
 	drivers.
 
@@ -96,6 +100,7 @@ struct v4l2_decode_vbi_line {
 struct v4l2_subdev_core_ops {
 	int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
 	int (*log_status)(struct v4l2_subdev *sd);
+	int (*s_config)(struct v4l2_subdev *sd, int irq, void *platform_data);
 	int (*init)(struct v4l2_subdev *sd, u32 val);
 	int (*load_fw)(struct v4l2_subdev *sd);
 	int (*reset)(struct v4l2_subdev *sd, u32 val);